Toyota - Tundra - Parts Catalogue - 2007 - 2013

Toyota FULL SIZE TRUCK ˜ 1/14 TOYOTA TUNDRA X009-TND 9” Installation Manual ˜ Model: Full Size Truck ˜ Model Year: 2007-2013 ˜ Trim Level: All TOYOTA Model Year TUNDRA 2007 - 2013 * The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the listed vehicles above. Introduction ˜ Design and specifications are subject to change without notice for improvement. To Ensure Safe Use, Always Follow These Precautions ˜ The installation of this product requires specialized skills and experience. We recommend that you have the product installed by the store that you purchased it from. ˜ Before you use this product, be sure to carefully read this installation manual and the separate user's manual so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals. ˜ This manual includes a number of symbols that are intended to help you use the product safely, to prevent harm to you and others, and to protect against damage to property. These symbols and their meanings are listed below. Make sure you fully understand these symbols before you begin reading the main text. Explanations of Injury and Damage That May Result from Incorrect Use Warning Ignoring the content marked by this indication and using the product incorrectly is expected to lead to death or serious injury. Caution Ignoring the content marked by this indication and using the product incorrectly is only expected to lead to injury or property damage. Toyota FULL SIZE TRUCK Types of Precautions Forbidden Forbidden Indicates actions that are forbidden (must not be performed) Mandatory Indicates that disassembly is forbidden. ˜ 2/14 Indicates actions that are mandatory (must be performed) Marks content that should receive your full attention. Warning Do not disassemble or modify the product. Doing so could lead to an accident, fire, or electric shock. Forbidden Store screws and other small objects where small children cannot reach them. If one of these small objects is swallowed, consult with a doctor immediately. When replacing fuses, be sure to use fuses with the specified current rating. Failing to do so could lead to an accident or fire. Forbidden Mandatory Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to an accident or fire. Mandatory Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so could lead to electric shock or injury. Do not cut the insulation on a cord and take power from another device. Doing so could lead to fire or electric shock. Forbidden Do not install the product in a location where it will obstruct the driver’s forward view; interfere with the operation of the steering wheel, gearshift, or the like; or pose a threat to passengers. Doing so could lead to an accident or injury. When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring, and the like. This kind of damage could lead to an accident or fire. Forbidden Toyota FULL SIZE TRUCK When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire. ˜ 3/14 Forbidden Do not install the product near the passenger-side airbag. Doing so could interfere with the operation of the airbag and lead to an accident or injury. Forbidden Bundle cords so that they don’t interfere with driving. Wrapping cords around the steering wheel, gearshift, brake pedal, or the like, could lead to an accident or damage equipment. Caution Connect the product properly according to the instructions. Failing to do so could lead to fire or an accident. Forbidden Do not sandwich cords between the seat railing or allow them to touch protrusions. Resulting breaks or shorts could lead to electric shock or fire. Do not block vents or heat sinks. Doing so could lead to fire or damage equipment. Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an accident or damage equipment. Forbidden Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust. Doing so could lead to fire or damage equipment. Forbidden The installation and wiring of this product requires specialized skills and experience. Have the product installed and wired by the store that you purchased it from. Toyota FULL SIZE TRUCK ˜ 4/14 Accessory List Head Unit Box Parts (X009) Owner’s Manual Disc X009 Head Unit X009 Camera Harness AUX/Pre Out Harness GPS Antenna USB Extension Cable 8mm x 8 Screws Quick Reference Guides Registration Cards QRG Audio QRG Navigation Alpine NAVTEQ Registration Card Registration Card iDatalink Maestro Box Parts (ALP-MRR V2.0/ALP-HRN-TND V2.0) Main Harness Factory Camera Adapter Harness Factory Amplified System Adapter OBDII Adapter cable Module USB Flashing Cable iDatalink Maestro Module Toyota FULL SIZE TRUCK ˜ 5/14 Installation Kit Parts (G-KTX-009-TND) X009-TND Radio Bezel Key Harnesses USB/HDMI Extension Connector Microphone Side Mounting Brackets Toyota FULL SIZE TRUCK Component Locations Head Unit GPS Antenna Microphone Location GPS Antenna Location ˜ 6/14 Toyota FULL SIZE TRUCK ˜ 7/14 Factory Unit Removal Process 1 Remove the door sill and kick panels. 2 Extract 2x 10mm bolts at the bottom of the knee cover panel and unsnap it. 3 Unplug the left and right instrument panel cover harness and unsnap it. 4 Remove the cigarette lighter panel using a panel removal tool. 5 Remove the HVAC control unit using a panel removal tool. 6 Remove the factory radio by extracting 4x 10mm bolts on the lower side. Toyota FULL SIZE TRUCK ˜ 8/14 Programming the iDatalink Maestro Module 1 INSTALL THE WEBLINK PLUG-IN Go to: idatalinkmaestro.com/plugin and follow the installation steps. 3 CONNECT YOUR MAESTRO MODULE 4 LOG INTO WEBLINK 5 PROGRAM YOUR MODULE 6 Once programing is complete “FLASHING COMPLETED” will be displayed. Use the included USB cable to connect your Maestro module to your PC. Review the System Requirements before installing. If the plugin is already installed, the caution, “The plugin is already installed” appears. Please skip to step 2. 2 Go to: idatalinkmaestro.com/login. Enter your username and password, then click OK. REGISTER A WEBLINK ACCOUNT Go to: idatalinkmaestro.com/register and complete the registration process. A confirmation email will be sent to you requiring validation. For existing customers, click log in. Follow the programming steps for your vehicle. For existing customers, click “log in”. Proceed to the next page to complete installation. Toyota FULL SIZE TRUCK ˜ 9/14 Installation Instructions 1 Connect the Maestro Module to the main harness. 4 Remove the center top dash cover using a panel removal tool. Place GPS antenna as illustrated and feed the cable down to the X009. 2 Using a cutting tool, trim the marked gray area. (This will allow for the X009 to sit high enough on the dash) 5 Mount the microphone using the included clip and run the cable to the radio cavity. 6 Plug the OBDII connector cable into the OBDII port below the driver side dash and run the extension to the headunit cavity. 3 Connect the main harness to the factory harness and secure it. Toyota FULL SIZE TRUCK ˜ 10/14 Installation Instructions 1 Attach the side brackets using the provided screws. 2 Connect the USB/HDMI extension and run it to the HVAC location. 4 Connect the X009-TND radio bezel and press it into place. 5 Press the HVAC and other panels into place. INFO SELECT RESET SETUP US/M 3 With the key harness ran below the head unit, mount the head unit using the 4x 10mm factory bolts. Toyota FULL SIZE TRUCK ˜ 11/14 Exploded-View Diagram X009 Head Unit X009-TND Radio Bezel OEM/HVAC Switch Panel Assembly Side Mounting Bracket OEM/HDMI Port Bezel Wiring Diagram 20-pin 8-pin 8-pin Microphone Input for BT Hand Free Toyota FULL SIZE TRUCK X009-TND Basic System Wiring 2-pin Black Connector 3.5mm Aux 3 /iPod Video X009 Camera Harness 3.5mm Aux 3 /iPod Video Factory Rearview Camera 3.5mm iDatalink Audio ˜ 12/14 Toyota FULL SIZE TRUCK 2-pin White Connector OBDII Extension Cable 2-pin Black Connector Amplified System Adapter X009-TND Amplified System Wiring 3.5mm Aux 3 /iPod Video X009 Camera Harness 3.5mm Aux 3 /iPod Video Factory Rearview Camera 3.5mm iDatalink Audio ˜ 13/14 Toyota FULL SIZE TRUCK ˜ 14/14 X009-TND Camera, Amplified and Navigation Equipped System Wiring Aftermarket Black White (Ground) Black (Power 5V+) Gray (Video -) Brown Red (Video +) Yellow OEM Camera adapter for navigation equipped vehicles Factory Camera Adapter Harness OBDII Extension Cable 2-pin Black Connector Amplified System Adapter Green/Yellow 2-pin White Connector OEM 3.5mm Aux 3 /iPod Video X009 Camera Harness 3.5mm Aux 3 /iPod Video Factory Rearview Camera 3.5mm iDatalink Audio