FITTING INSTRUCTIONS
Part Name/Description:
Applicability:
Part No:
TONNEAU COVER
NISSAN NP300 NAVARA WITH SPORT BAR
D23KEKTONRB
Fit Time: 45min
Read instructions carefully before commencing this activity.
•
•
•
•
•
!
IMPORTANT:
Do not use this product on any other motor vehicle.
Do not use any other mounting location / method other than described in these instructions.
It is advisable to seek the assistance of another person when installing this product.
Do not remove the warranty label from this cover (8 digit number located on a silver decal).
Ensure all torque settings are followed.
Kit Contents
No.
Item Description
Quantity
Image
Service Kit
Part Number
Service Kit
Quantity
1
Canvas Kit - Includes all latches
1
N/A
1
2
Front Left Side Profile - Short
1
N/A
1
3
Front Right Side Profile - Short
1
N/A
1
4
"G" Clamp
8
N/A
8
5
Crossbar with plastic tips
2
N/A
2
6
Front Left Bracket
1
N/A
1
7
Front Right Bracket
1
N/A
1
8
Rear Left Side Profile - Long
1
N/A
1
9
Rear Right Side Profile - Long
1
N/A
1
10
Front Central Bracket
2
N/A
2
11
M6x1,00x20 Hex Bolt
6
N/A
6
12
M8x1,25x20 Hex Bolt
4
N/A
4
13
M6x1,6x14 Washer
6
N/A
6
14
M8x17 Washer
4
N/A
4
15
Vinyl Protective Strips - 1 x Large, 1
x LHS Small & 1 x RHS Small
3
N/A
3
M8 x 19mm x 2mm Thick Washer/Spacer
4
16
Long (500 x 40mm)
LHS
RHS
N/A
4
Locate all the mounting parts in the carton box and check them against the quantities detailed in these fitting
instructions before starting the installation.
D23KEKTONRB - Issue 3 - Date - 08 February 2018
Page 1 of 6
In producing this document Nissan (South Africa) (Pty) Ltd (“Nissan”) has relied upon information and representations made by third party suppliers and to the extent
permitted by law, neither Nissan nor their third party supplier accept responsibility for any losses, faults or damage caused to the vehicle or accessory components
that occur due to a failure to properly follow these instructions.
Nissan (South Africa) Pty Ltd
Ernest Oppenheimer St, Rosslyn, Gauteng, 0200
FITTING INSTRUCTIONS
Part Name/Description:
Applicability:
Part No:
TONNEAU COVER
NISSAN NP300 N AVARA WITH SPORT BAR
D23KEKTONRB
Fit Time: 45min
Tools Required
• Torque Wrench
• 10mm Socket Wrench
• Phillips Head Screwdriver
General Notes
• Read through the fitting instructions before installation of this accessory.
• Always install the accessory according the fitting instructions. Failure to do so may cause damage to the vehicle or
accessory.
• Ensure that all discarded vehicle/accessory components and packaging are recycled following local recycling
regulations.
• It is always recommended that this accessory is fitted by a qualified Nissan Technician.
• Safely store and protect any removed vehicle components.
• Ensure that all surfaces to which this accessory will fit are clean and free of dirt.
• Ensure all fasteners are torqued to the specifications detailed in these fitting instructions.
Use the sachet of grease in the fitting instructions to lubricate the latches of this cover before use.
Affix the Closing Instructions sticker found in this kit to the vehicle
tailgate so that they are clearly visible to the user of the tonneau
cover when the cover is open.
Safety Notes
• Check that all work practices comply with safety standards.
• Appropriate clothing & PPE must be worn.
• While using power tools or safety equipment, ensure safe procedures are followed.
Manufacturers Warranty:
This product carries a manufacturer warranty against defects in material and
workmanship for a period of one year from the date of installation.
Important:
Place these instructions in the glove compartment of the vehicle for the benefit
of the customer or end user.
D23KEKTONRB - Issue 3 - Date - 08 February 2018
Page 2 of 6
In producing this document Nissan (South Africa) (Pty) Ltd (“Nissan”) has relied upon information and representations made by third party suppliers and to the extent
permitted by law, Nissan nor their third party supplier accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that
occur due to a failure to properly follow these instructions.
Nissan (South Africa) Pty Ltd
Ernest Oppenheimer St, Rosslyn, Gauteng, 0200
FITTING INSTRUCTIONS
Part Name/Description:
Applicability:
Part No:
TONNEAU COVER
NISSAN NP300 NAVARA WITH SPORT BAR
D23KEKTONRB
Fit Time: 45min
Step 1
NB: Adhere the large vinyl protector strip "15" to
the centre of the cab, just above the the front top rail
of the load bin as indicated by the arrow on the right.
Open the load bin tail gate. Position brackets "6" and
"7" on the inside front part of the load bin as indicated
and affix using "12" M8 hex bolts and "14" washers.
Ensure that spacer washers "16" are placed between
the bracket and the load body. Do not tighten. Repeat
this procedure with the "10" front central brackets,
making sure that the oblong/slotted hole is at the
bottom to allow for adjustment. Do not forget the
spacer washers "16".
6
10
10
7
Step 2
Unroll the "1" canvas kit and position the front profile
over the front of the load bed and align them with
the brackets installed previously in step 1.
IMPORTANT NOTE
During the installation, lay the canvas over the
sport bar or vehicle cabin. Ensure that the
canvas kit elastic straps are on the inside of
the load bed as indicated by the arrows.
Step 3
With the aid of "11" M6 bolts and "13" washers, affix the
"6", "7" and "10" brackets to the sliders located in the
front aluminium profile of the canvas kit. Whilst applying
downward compression on the front rail, tighten all
bolts in this front section to 4Nm.
Once installed, ensure that the front of the tonneau
cover does not make contact with the rear of the cab.
!
4Nm
Do not exceed the specified torque
10
Use a 10mm wrench
D23KEKTONRB - Issue 3 - Date - 08 February 2018
Page 3 of 6
In producing this document Nissan (South Africa) (Pty) Ltd (“Nissan”) has relied upon information and representations made by third party suppliers and to the extent
permitted by law, Nissan nor their third party supplier accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that
occur due to a failure to properly follow these instructions.
Nissan (South Africa) Pty Ltd
Ernest Oppenheimer St, Rosslyn, Gauteng, 0200
FITTING INSTRUCTIONS
Part Name/Description:
Applicability:
Part No:
TONNEAU COVER
NISSAN NP300 N AVARA WITH SPORT BAR
D23KEKTONRB
Fit Time: 45min
Step 4
Position the shorter "2" and "3" front side profiles
over the load bed sides, between the upright bars of
the sport bar on each side.
Position the longer "8" and "9" rear side profiles over
the load bed sides, making sure that the latches are
located to the rear.
Note: To ensure that the canvas is a taught fit, align
the side profiles to the outer edge of the load bed.
Note: Should the canvas not be taught enough once
the installation is complete, move the rear side
profiles backwards to take up any slack in the
canvas.
8
2
Step 5
REAR
TEIRA R
DIAN BA RO
SSA TC ROSSDELANTE
TRAVEFRON ESAÑO
LA
M
P
TRAV
C
Align the "G" clamps "4" with the "CLAMP" stickers
located on the top of the side profile rails and
secure as illustrated in the detailed drawing to the
right. Torque to 4Nm.
Make sure that the side profiles are aligned with
the outer edge of the load bed.
3
9
CLAMP
!
4Nm
Do not exceed the specified torque
10
Use a 10mm wrench
Step 6
Position the crossbars "5" as indicated by the
"CROSSBAR" stickers by gently sliding them into
place between the aluminium side profiles as indicated.
TRAVESSA DIANTEIRA
FRONT CROSSBAR
TRAVESAÑO DELANTERO
FRONT
REAR
TRAVESSA TRASEIRA
REAR CROSSBAR
TRAVESAÑO TRASERO
IMPORTANT NOTE
Note that the crossbars must be placed
bowed upwards, otherwise water may
accumulate on top of the canvas.
D23KEKTONRB - Issue 3 - Date - 08 February 2018
FRONT
Page 4 of 6
In producing this document Nissan (South Africa) (Pty) Ltd (“Nissan”) has relied upon information and representations made by third party suppliers and to the extent
permitted by law, Nissan nor their third party supplier accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that
occur due to a failure to properly follow these instructions.
Nissan (South Africa) Pty Ltd
Ernest Oppenheimer St, Rosslyn, Gauteng, 0200
FITTING INSTRUCTIONS
Part Name/Description:
Applicability:
Part No:
TONNEAU COVER
NISSAN NP300 N AVARA WITH SPORT BAR
D23KEKTONRB
Step 7
Lubricate the cast aluminium latches with the grease
provided.
Lay the canvas cover over the load bin.
Fit the flexible profiles of the canvas cover to the
underside of the side profiles, working from the front
to the rear. Refer to the detailed sketch A.
With the tailgate open, align the upper and lower
latches with one another.
TO CLOSE: Close the tailgate. Place one hand at
each corner of the cover and firmly press down until a
click is heard. The cover is now closed. Check the
fitting of the flexible side profiles once again.
Fit Time: 45min
A
CLICK
1
CLICK
2
Step 8
Position the rubber collar firmly aroung the sport bar
profile and attach the velcro as indicated.
Opening and Closing Instructions:
Attach the opening and closing sticker provided in
these fitting instructions in a position where it can be
read by the user.
Step 9
TO OPEN: Open the tailgate. Place one hand on the
rear top centre of the cover and gently depress.
Using your other hand pull on the cable release and
release the downward pressure being applied by the
other hand. The latches will release and the rear
section of the cover will pop up.
2
1
Disengage the latches.
Open the velcro tabs that enclose the sport bar.
D23KEKTONRB - Issue 3 - Date - 08 February 2018
Page 5 of 6
In producing this document Nissan (South Africa) (Pty) Ltd (“Nissan”) has relied upon information and representations made by third party suppliers and to the extent
permitted by law, Nissan nor their third party supplier accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that
occur due to a failure to properly follow these instructions.
Nissan (South Africa) Pty Ltd
Ernest Oppenheimer St, Rosslyn, Gauteng, 0200
FITTING INSTRUCTIONS
Part Name/Description:
Applicability:
Part No:
TONNEAU COVER
NISSAN NP300 N AVARA WITH SPORT BAR
D23KEKTONRB
Fit Time: 45min
Step 10
Fasten all bolts. Once all final adjustments have been
made to the side rails and tonneau cover, adhere the
two small vinyl protective strips just behind the latches
at the rear. LHS & RHS differ and should be fitted so
that the vinyl tapers to the inside. Failure to fit these
vinyl protectors may result in damage to the paintwork.
CLICK
CLICK
2
These fitting instructions as well as a video
guideline can be found at http://www.keko.co.za/
tonneau-cover-navara-15-80953.html
Step 11
IMPORTANT:
STOWING YOUR COVER: Carefully loosen the Velcro
tabs that surround the sport bar. From the rear of the
cover, "unclip/loosen" the flexible side profile strips of the
cover from the aluminium side profiles. Roll up the
canvas so that the inside of the cover is exposed. Hold
the cover in place at the front of the load bin with the aid
of both elastic straps by securing it with the plastic
buckles.
!
IMPORTANT: If only one side of the canvas
is locked, the accessory may suffer damages.
DO NOT close the tailgate with the tonneau
cover locked in the closed position.
CLEANING THE TONNEAU COVER:
Use only water and mild soap. DO NOT use car shine products.
Lubricate the latches regularly.
D23KEKTONRB - Issue 3 - Date - 08 February 2018
Page 6 of 6
In producing this document Nissan (South Africa) (Pty) Ltd (“Nissan”) has relied upon information and representations made by third party suppliers and to the extent
permitted by law, Nissan nor their third party supplier accepts no responsibility for any losses, faults or damage caused to the vehicle or accessory components that
occur due to a failure to properly follow these instructions.
Nissan (South Africa) Pty Ltd
Ernest Oppenheimer St, Rosslyn, Gauteng, 0200