Nissan - Cargo - Owners Manual - 2015 - 2015

® 2015 NV200 COMPACT CARGO OWNER’S MANUAL For your safety, read carefully and keep in this vehicle. FOREWORD Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. Please read through this manual before operating your vehicle. A separate Warranty Information Booklet explains details about the warranties covering your vehicle. The “NISSAN Service and Maintenance Guide” explains details about maintaining and servicing your vehicle. Additionally, a separate Customer Care/Lemon Law Booklet (U.S. only) will explain how to resolve any concerns you may have with your vehicle, as well as clarify your rights under your state’s lemon law. Your NISSAN dealership knows your vehicle best. When you require any service or have any questions, they will be glad to assist you with the extensive resources available to them. In addition to factory-installed options, your vehicle may also be equipped with additional accessories installed by NISSAN or by your NISSAN dealer prior to delivery. It is important that you familiarize yourself with all disclosures, READ FIRST—THEN DRIVE SAFELY warnings, cautions and instructions concerning proper use of such accessories prior to operating the vehicle and/or accessory. See a NISSAN dealer for details concerning the particular accessories with which your vehicle is equipped. Before driving your vehicle, please read this Owner’s Manual carefully. This will ensure familiarity with controls and maintenance requirements, assisting you in the safe operation of your vehicle. WARNING IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY! Follow these important driving rules to help ensure a safe and comfortable trip for you and your passengers! ● NEVER drive under the influence of alcohol or drugs. ● ALWAYS observe posted speed limits and never drive too fast for conditions. ● ALWAYS give your full attention to driving and avoid using vehicle features or taking other actions that could distract you. ● ALWAYS use your seat belts and appropriate child restraint systems. ● ALWAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle. ● ALWAYS review this Owner’s Manual for important safety information. DRIVING This vehicle will handle and maneuver differently from an ordinary passenger vehicle because it has a higher center of gravity. As with other vehicles with features of this type, failure to operate this vehicle correctly may result in loss of control or an accident. Be sure to read “Driving precautions,” “Avoiding collision and rollover” and “Driving safety precautions” in the “Starting and driving” section of this manual. MODIFICATION OF YOUR VEHICLE WARNING Any modifications or alterations of this vehicle that do not comply with the NISSAN NV200 Compact Cargo Body Builder’s Guide may affect the safety of the vehicle which may result in a collision, serious personal injury or death. A electronic copy of the NISSAN NV200 Compact Cargo Body Builder’s Guide is available at www.nissancommercialvehicles.com. Modifications made to this vehicle by conversion companies or dealers may affect the final certification of the engine, vehicle or equipment. The conversion company or dealer has the responsibility to certify that the altered vehicle and equipment complies or continues to comply with all applicable motor vehicle safety standards and emissions regulations. The conversion company or dealer is responsible for making sure the modifications or installed equipment does not affect the safety of the vehicle. NISSAN does not assume the responsibility as the final stage manufacturer for modified or altered vehicles. NISSAN is not responsible for the final certification, product liability claims, or warranty claims, resulting from any component, assembly, or system being altered. NISSAN is not responsible for modifications which cause the vehicle to become non-compliant with any of the motor vehicle safety standards, emissions regulations, or modifications that cause the vehicle to be or become defective or unsafe. Your vehicle’s warranty may not cover damage resulting from alterations, modifications, installation of nonapproved accessories, or improper installation of accessories. Refer to your 2014 NV200 Compact Cargo Warranty Information Booklet for complete details. WHEN READING THE MANUAL This manual includes information for all features and equipment available on this model. Features and equipment in your vehicle may vary depending on model, trim level, options selected, order, date of production, region or availability. Therefore, you may find information about features or equipment that are not included or installed on your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications, performance, design or component suppliers without notice and without obligation. From time to time, NISSAN may update or revise this manual to provide Owners with the most accurate information currently available. Please carefully read and retain with this manual all revision updates sent to you by NISSAN to ensure you have access to accurate and up-todate information regarding your vehicle. Current versions of vehicle Owner’s Manuals and any updates can also be found in the Owner section of the NISSAN website at https://owners.nissanusa.com/nowners/ navigation/manualsGuide. If you have questions concerning any information in your Owner’s Manual, contact NISSAN Consumer Affairs. See the NISSAN CUSTOMER CARE PROGRAM page in this Owner’s Manual for contact information. IMPORTANT INFORMATION ABOUT THIS MANUAL You will see various symbols in this manual. They are used in the following ways: WARNING This is used to indicate the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely. CAUTION This is used to indicate the presence of a hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully. APD1005 If you see this symbol, it means “Do not do this” or “Do not let this happen.” If you see a symbol similar to these in an illustration, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to these indicate movement or action. Arrows in an illustration that are similar to these call attention to an item in the illustration. CALIFORNIA PROPOSITION 65 WARNING WARNING Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CALIFORNIA PERCHLORATE ADVISORY BLUETOOTH® is a trademark owned by Bluetooth SIG, Inc. and licensed to Visteon and Bosch. SiriusXM® Satellite Radio requires subscription, sold separately. Not available in Alaska, Hawaii or Guam. For additional information, visit www.siriusxm.com. Some vehicle parts, such as lithium batteries, may contain perchlorate material. The following advisory is provided: “Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate/”. © 2014 NISSAN NORTH AMERICA, INC. All rights reserved. No part of this Owner’s Manual may be reproduced or stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Nissan North America, Inc. NISSAN CUSTOMER CARE PROGRAM NISSAN CARES . . . Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer cannot assist you with or you would like to provide NISSAN directly with comments or questions, please contact the NISSAN Consumer Affairs Department using our toll-free number: For U.S. customers 877–NIS-NCV1 (877-647-6281) For Canadian customers 1-800-387-0122 The Consumer Affairs Department will ask for the following information: – Your name, address, and telephone number – Vehicle identification number (attached to the top of the instrument panel on the driver’s side) – Date of purchase – Current odometer reading – Your NISSAN dealer’s name – Your comments or questions OR You can write to NISSAN with the information at: For U.S. customers Nissan North America, Inc. Consumer Affairs Department P.O. Box 685003 Franklin, TN 37068-5003 or via e-mail at: [email protected] For Canadian customers Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5 or via e-mail at: [email protected] If you prefer, visit us at: www.nissanusa.com (for U.S. customers) or www.nissan.ca (for Canadian customers) We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle. Table of Contents Illustrated table of contents 0 Safety—Seats, seat belts and supplemental restraint system 1 Instruments and controls 2 Pre-driving checks and adjustments 3 Monitor, climate, audio, phone and voice recognition systems 4 Starting and driving 5 In case of emergency 6 Appearance and care 7 Maintenance and do-it-yourself 8 Technical and consumer information 9 Index 10 0 Illustrated table of contents Air bags, seat belts and child restraints . . . . . . . . . . . . . . 0-2 Exterior front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-3 Exterior rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-4 Passenger compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-5 Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-6 Engine compartment check locations . . . . . . . . . . . . . . . . 0-7 Warning/indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-8 AIR BAGS, SEAT BELTS AND CHILD RESTRAINTS 1. 2. 3. 4. 5. 6. 7. Seat belt with pretensioners (P. 1-11) Roof-mounted curtain side-impact and rollover supplemental air bag (P. 1-30) Head restraints/headrests (P. 1-7) Supplemental front-impact air bags (P. 1-30) Seats (P. 1-2) Top tether strap anchor point (P. 1-22) Front seat-mounted side-impact supplemental air bag (P. 1-30) Refer to the page number indicated in parentheses for operating details. LII2179 0-2 Illustrated table of contents EXTERIOR FRONT 1. 2. Engine hood (P. 3-13) Windshield wiper and washer switch (P. 2-18) 3. Windshield (P. 8-18) 4. Power windows (P. 2-26) 5. Door locks, keys (P. 3-3, 3-2) 6. Mirrors (P. 3-17) 7. Tire pressure (P. 8-32) 8. Flat tire (P. 6-2) 9. Tire chains (P. 8-32) 10. Replacing bulbs (P. 8-25) 11. Headlight and turn signal switch (P. 2-19) Refer to the page number indicated in parentheses for operating details. LII2060 Illustrated table of contents 0-3 EXTERIOR REAR 1. 2. 3 4. Back doors (P. 3-7) Rear camera (if so equipped) (p. 4-8) Replacing bulbs (P. 8-25) Vehicle loading (P. 9-12) Refer to the page number indicated in parentheses for operating details. LII2061 0-4 Illustrated table of contents PASSENGER COMPARTMENT 1. 2. 3. 4. 5. 6. 7. 8. Map lights (P. 2-29) Sun visors (P. 3-16) Inside mirror (if so equipped) (P.3-17) Steering wheel switches for audio control (if so equipped) (P. 4-50) Glove box (P. 2-25) Storage trays (P. 2-24) Front seats (P. 1-2) Fuel-filler cap, fuel recommendation (P. 3-14, P. 9-3) Refer to the page number indicated in parentheses for operating details. LII2181 Illustrated table of contents 0-5 INSTRUMENT PANEL 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. LIC2896 1. 2. 3. 4. Vents (P. 4-12) Headlight/turn signal switch (P. 2-19) Driver’s supplemental air bag /horn (P. 1-30, 2-22) Meters and gauges (P. 2-3) 0-6 Illustrated table of contents 5. 6. 7. Cruise control switches (if so equipped) (P. 5-16) Windshield wiper/washer switch (P. 2-18) Rear window and outside mirror (if so equipped) defroster switch (P. 2-22) Audio system (P. 4-21) Passenger’s supplemental air bag (P. 1-30) Glove box (P. 2-25) Climate controls (P. 4-13) Front passenger air bag status light (P. 2-13) Cup holders (P. 2-25) Shift lever (P. 5-12) Hazard warning flasher switch (P. 6-2) Rear sonar system off switch (P. 2-22) Ignition switch (P. 5-7) Audio control switches (if so equipped) (P. 4-50) Fuel-filler lid release lever (P. 3-14)/ Hood release lever (P. 3-13) Fuse box (P. 8-20) Vehicle Dynamic Control (VDC) off switch (P. 2-22)/Electronic outside rearview mirror control switch (if so equipped) (P. 3-18) For additional information, refer to the page number indicated in parentheses for operating details. ENGINE COMPARTMENT CHECK LOCATIONS MR20DE engine 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Engine coolant reservoir (P. 8-7) Engine oil filler cap (P. 8-9) Brake fluid reservoir (P. 8-12) Air cleaner (P. 8-17) Fuse and relay box (P. 8-20) Battery (P. 8-13) Radiator cap (P. 8-7) Engine oil dipstick (P. 8-9) Drive belt location (P. 8-16) Windshield-washer fluid reservoir (P. 8-12) LDI2279 Illustrated table of contents 0-7 WARNING/INDICATOR LIGHTS Warning light or Name Page Anti-lock Braking System (ABS) warning light 2-9 Brake warning light 2-9 or Warning light Name Page Indicator light Name Page Continuously Variable Transmission (CVT) position indicator light 2-13 Cruise main switch indicator light (if so equipped) 2-13 Low fuel warning light 2-10 Low tire pressure warning light 2-10 Low windshieldwasher fluid warning light (if so equipped) 2-12 2-12 Front passenger air bag status light 2-13 Power steering warning light 2-12 High beam indicator light (blue) 2-13 Seat belt warning light and chime 2-13 Malfunction Indicator Light (MIL) 2-13 Supplemental air bag warning light Charge warning light 2-10 Door open warning light 2-10 Engine oil pressure warning light 2-10 Security indicator light 2-14 High temperature warning light (red) 2-10 Slip indicator light 2-14 0-8 Illustrated table of contents Indicator light Name Page Turn signal/hazard indicator lights 2-14 Vehicle Dynamic Control (VDC) off indicator light 2-15 Illustrated table of contents 0-9 MEMO 0-10 Illustrated table of contents 1 Safety—Seats, seat belts and supplemental restraint system Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Front manual seat adjustment . . . . . . . . . . . . . . . . . . . . 1-2 Flexible seating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Head restraints/Headrests. . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Adjustable head restraint/headrest components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Non-adjustable head restraint/headrest components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Precautions on seat belt usage. . . . . . . . . . . . . . . . . . 1-11 Seat belt warning light . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Pregnant women . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Injured persons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Three-point type seat belt with retractor . . . . . . . . . . 1-14 Seat belt extenders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Seat belt maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Child safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18 Infants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 Small children . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 Larger children . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 Child restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20 Precautions on child restraints . . . . . . . . . . . . . . . . . . 1-20 Top tether anchor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21 Rear-facing child restraint installation using the seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22 Forward-facing child restraint installation using the seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22 Installing top tether strap (front passenger seat). . . . . . . . . . . . . . . . . . . . . . . . . . 1-26 Booster seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26 Supplemental restraint system (SRS) . . . . . . . . . . . . . . . 1-30 Precautions on SRS . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30 Supplemental air bag warning labels . . . . . . . . . . . . . 1-47 Supplemental air bag warning light . . . . . . . . . . . . . . 1-47 SEATS ● Do not adjust the driver’s seat while driving so full attention may be given to vehicle operation. The seat may move suddenly and could cause loss of control of the vehicle. ● The seatback should not be reclined any more than needed for comfort. Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased. ARS1152 WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. ● For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat properly. For additional information, refer to “Precautions on seat belt usage” in this section. ● After adjustment, gently rock in the seat to make sure it is securely locked. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents. 1-2 Safety—Seats, seat belts and supplemental restraint system CAUTION When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damage. FRONT MANUAL SEAT ADJUSTMENT LRS2208 LRS2220 LRS2221 Forward and backward Reclining Seat lifter (driver’s seat) Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. To recline the seatback, pull the lever up and lean back. To bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seatback in position. Pull up or push down the adjusting lever to adjust the seat height until the desired position is achieved. The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. For additional information, refer to “Precautions on seat belt usage” in this section. Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped and the shift lever is in the P (Park) position. Safety—Seats, seat belts and supplemental restraint system 1-3 FLEXIBLE SEATING WARNING ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly. WRS0389 LRS2339 Lumbar support (driver’s seat) Armrest (driver’s side only) The lumbar support feature provides adjustable lower back support to the driver. Move the lever forward or backward to adjust the seat lumbar area. To use the armrest, pull it down to the resting position. A 䊊 B 䊊 Stowed position Resting position 1-4 Safety—Seats, seat belts and supplemental restraint system ● Never allow anyone to ride in the cargo area or on the seats when they are in the fold-down position. In a collision, people riding in these areas without proper restraints are more likely to be seriously injured or killed. ● Head restraints/headrests should be adjusted properly as they may provide significant protection against injury in an accident. Always replace and adjust them properly if they have been removed for any reason. ● If the head restraints/headrests are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident. ● When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. ● Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. LRS2336 LRS2345 Folding the front passenger’s seatback To fold the front passenger’s seatback flat for extra storage: 1. Slide the seat to the rearmost position. Lift 1 , located on the up on the recline lever 䊊 outside edge of the seat, and fold the seatback forward as far as it will go. Then lift up 2 located on the inside of the on the latch 䊊 seatback to release the back of the seat. 2. Once the seatback is released, it will enable 3 you to fold the front passenger seatback 䊊 flat over the seat cushion. Safety—Seats, seat belts and supplemental restraint system 1-5 WARNING ● If you fold the front passenger’s seatback flat forward to carry longer objects, be sure this cargo is properly secured and not near an air bag. In a crash, an inflating air bag might force that object toward a person. This could cause severe injury or even death. Secure objects away from the area in which an air bag would inflate. For additional information, refer to “Precautions on SRS” in this section. LRS2338 3. To return the front passenger’s seat to a seating position, lift up on the seatback and push it up to an upright position. Then pull up 1 and lean the seatback on the recline lever 䊊 to a proper seating position. Release the lever to lock the seatback in position. ● Never allow anyone to ride in the cargo area or on the front passenger’s seat when it is in the fold-down position. Use of these areas by passengers could result in serious injury in an accident or sudden stop. ● Properly secure all cargo to help prevent it from sliding and shifting. In a sudden stop or collision, unsecured cargo could cause personal injury (even if the vehicle has equipped a partition accessory to divide the front seats from the cargo area). 1-6 Safety—Seats, seat belts and supplemental restraint system CAUTION Do not apply a load to the back of the table if it is not fully horizontal. Doing so may cause deformation/malfunction. NOTE: The belt buckle must be in the forward most position for the seat to be folded to avoid premature aging. HEAD RESTRAINTS/HEADRESTS ● Adjustable head restraints/headrests have multiple notches along the stalk(s) to lock them in a desired adjustment position. WARNING Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end collisions. Adjustable head restraints/headrests must be adjusted properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint/headrest stalks or remove the head restraint/headrest. Do not use the seat if the head restraint/headrest has been removed. If the head restraint/headrest was removed, reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position. Failure to follow these instructions can reduce the effectiveness of the head restraints/headrests. This may increase the risk of serious injury or death in a collision. ● The non-adjustable head restraints/headrests have a single locking notch to secure them to the seat frame. ● Proper Adjustment: – For the adjustable type, align the head restraint/headrest so the center of your ear is approximately level with the center of the head restraint/headrest. LRS2515 The illustration shows the seating positions equipped with head restraints/headrests. 䉱 Indicates the seating position is equipped with a head restraint. – If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position. ● If the head restraint/headrest has been removed, ensure that it is reinstalled and locked in place before riding in that designated seating position. 䡲 Indicates the seating position is equipped with a headrest. + Indicates the seating position is not equipped with a head restraint or headrest (if applicable). ● Your vehicle is equipped with a head restraint/headrest that may be integrated, adjustable or non-adjustable. Safety—Seats, seat belts and supplemental restraint system 1-7 LRS2300 ADJUSTABLE HEAD RESTRAINT/ HEADREST COMPONENTS 1. Removable head restraint/headrest LRS2299 NON-ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS LRS2302 REMOVE Use the following procedure to remove the head restraint/headrest: 2. Multiple notches 1. Removable head restraint/headrest 3. Lock knob 2. Single notch 1. Pull the head restraint/headrest up to the highest position. 4. Stalks 3. Lock knob 2. Push and hold the lock knob. 4. Stalks 3. Remove the head restraint/headrest from the seat. 4. Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle. 1-8 Safety—Seats, seat belts and supplemental restraint system 5. Reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position. LRS2303 INSTALL WRS0134 ADJUST 1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the notch (notches) 1 must be installed in the hole with the lock 䊊 2 . knob 䊊 For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position. 2. Push and hold the lock knob and push the head restraint/headrest down. 3. Properly adjust the head restraint/headrest before an occupant uses the seating position. Safety—Seats, seat belts and supplemental restraint system 1-9 LRS2351 LRS2305 LRS2306 For non-adjustable head restraint/headrest Raise Lower Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position. To raise the head restraint/headrest, pull it up. To lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position. 1-10 Safety—Seats, seat belts and supplemental restraint system Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position. SEAT BELTS SSS0136 PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly adjusted and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in a collision and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes a supplemental air bag. Most U.S. states and Canadian provinces or territories specify that seat belts be worn at all times when a vehicle is being driven. Safety—Seats, seat belts and supplemental restraint system 1-11 SSS0134 WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly restrained in the rear seat and, if appropriate, in a child restraint. 1-12 Safety—Seats, seat belts and supplemental restraint system SSS0016 WARNING ● The seat belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. Serious injury or death can occur if the seat belt is not worn properly. ● Be sure the seat belt tongue is securely fastened to the proper buckle. ● Do not wear the seat belt inside out or twisted. Doing so may reduce its effectiveness. ● Do not allow more than one person to use the same seat belt. ● Never carry more people in the vehicle than there are seat belts. SSS0014 WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NOT THE WAIST. A lap belt worn too high could increase the risk of internal injuries in an accident. ● If the seat belt warning light glows continuously while the ignition is turned ON with all doors closed and all seat belts fastened, it may indicate a malfunction in the system. Have the system checked by a NISSAN dealer. ● No changes should be made to the seat belt system. For example, do not modify the seat belt, add material, or install devices that may change the seat belt routing or tension. Doing so may affect the operation of the seat belt system. Modifying or tampering with the seat belt system may result in serious personal injury. ● Once a seat belt pretensioner has activated, it cannot be reused and must be replaced together with the retractor. See your NISSAN dealer. ● Removal and installation of pretensioner system components should be done by a NISSAN dealer. ● All seat belt assemblies, including retractors and attaching hardware, should be inspected after any collision by a NISSAN dealer. NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the collision was minor and the belts show no damage and continue to operate properly. Seat belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted. ● All child restraints and attaching hardware should be inspected after any collision. Always follow the restraint manufacturer’s inspection instructions and replacement recommendations. The child restraints should be replaced if they are damaged. Safety—Seats, seat belts and supplemental restraint system 1-13 PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific recommendations. INJURED PERSONS LRS0786 SEAT BELT WARNING LIGHT Both the driver’s and passenger’s front seats are equipped with a seat belt warning light. The warning light, located on the instrument panel, will show the status of the driver and passenger seat belt. NOTE: NISSAN recommends that injured persons use seat belts. Check with your doctor for specific recommendations. THREE-POINT TYPE SEAT BELT WITH RETRACTOR WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. The front passenger seat belt warning light will not light up if the seat is not occupied. For additional information, refer to “Warning/indicator lights and audible reminders” in the “Instruments and controls” section of this manual. 1-14 Safety—Seats, seat belts and supplemental restraint system ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. ● For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat belt properly. ● Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Retractor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode activated, the child can be seriously injured or killed if the seat belt retracts and becomes tight. This can occur even if the vehicle is parked. Unbuckle the seat belt to release the child. If the seat belt cannot be unbuckled or is already unbuckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt. LRS2208 Fastening the seat belts 1. Adjust the seat. For additional information, refer to “Seats” in this section. LRS2043 LRS2044 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. 3. Position the lap belt portion low and snug on the hips as shown. ● The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulled from its fully retracted position, firmly pull the belt and release it. Then smoothly pull the belt out of the retractor. 4. Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger seat three-point seat belt has two modes of operation: ● Emergency Locking Retractor (ELR) ● Automatic Locking Retractor (ALR) Safety—Seats, seat belts and supplemental restraint system 1-15 The ELR mode allows the seat belt to extend and retract to allow the driver and passengers some freedom of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during certain impacts. To increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly. The retractor should lock and restrict further belt movement. The ALR mode (child restraint mode) locks the seat belt for child restraint installation. If the retractor does not lock during this check or if you have any questions about seat belt operation, see a NISSAN dealer. When the ALR mode is activated, the seat belt cannot be extended again until the seat belt tongue is detached from the buckle and fully retracted. The seat belt returns to the ELR mode after the seat belt fully retracts. For additional information, refer to “Child restraints” in this section. The ALR mode should be used only for child restraint installation. During normal seat belt use by a passenger, the ALR mode should not be activated. If it is activated it may cause uncomfortable seat belt tension. WARNING When fastening the seat belts, be certain that the seatbacks are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. WRS0139 Unfastening the seat belts 1 䊊 To unfasten the seat belt, press the button on the buckle. The seat belt automatically retracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor ● When the vehicle slows down rapidly 1-16 Safety—Seats, seat belts and supplemental restraint system WARNING ● After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position. ● Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts. ● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. ● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. SEAT BELT EXTENDERS LRS0242 Driver’s side Shoulder belt height adjustment (driver’s side) The shoulder belt anchor height should be adjusted to the position best for you. For additional information, refer to “Precautions on seat belt 1 the usage” in this section. To adjust, pull out 䊊 adjustment button and move the shoulder belt 2 to the desired position, so the belt anchor 䊊 passes over the center of the shoulder. The belt should be away from your face and neck, but not falling off your shoulder. Release the adjustment button to lock the shoulder belt anchor into position. WARNING If, because of body size or driving position, it is not possible to properly fit the lap/shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available for purchase. The extender adds approximately 8 in (200 mm) of length and may be used for either the driver or front passenger seating position. See a NISSAN dealer for assistance with purchasing an extender if an extender is required. ● Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be seriously injured in a collision or a sudden stop. SEAT BELT MAINTENANCE ● To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpet. Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry. ● If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth. Safety—Seats, seat belts and supplemental restraint system 1-17 CHILD SAFETY ● Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced. WARNING Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Retractor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode activated, the child can be seriously injured or killed if the seat belt retracts and becomes tight. This can occur even if the vehicle is parked. Unbuckle the seat belt to release the child. If the seat belt cannot be unbuckled or is already unbuckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt. Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way to transport your child. There are three basic types of child restraint systems: ● Rear-facing child restraint 1-18 Safety—Seats, seat belts and supplemental restraint system ● Forward-facing child restraint ● Booster seat WARNING ● Never put a rear-facing child seat in the front seat. ● Never let an infant who requires the use of a rear-facing child restraint ride in this vehicle. Do not attempt to hold a child in your lap or arms. ● Infants and children need special protection. The vehicle’s seat belts may not fit them properly. The shoulder belt may come too close to the face or neck. The lap belt may not fit over their small hip bones. In an accident, an improperly fitting seat belt could cause serious or fatal injury. Always use appropriate child restraints. ● Never let a child stand or kneel on any seat and do not allow a child in the cargo area. The child could be seriously injured or killed in a sudden stop or collision. Your vehicle is equipped with a supplemental front-impact air bag system for the front passenger. For additional information, refer to “Supplemental restraint system (SRS)” in this section. The passenger seat is not suitable for use with a rear-facing child restraint needed for infants. Therefore, infants should not be transported in this vehicle. All U.S. states and Canadian provinces or territories require the use of approved child restraints for infants and small children. For additional information, refer to “Child restraints” in this section. A child restraint may be secured in the vehicle by using the vehicle seat belt. For additional information, refer to the “Child restraints” in this section. This is especially important because your vehicle has a supplemental restraint system (air bag system) for the front passenger. For additional information, refer to “Supplemental restraint system (SRS)” in this section. INFANTS Infants up to at least 1 year old should be placed in a rear-facing child restraint. Because a rearfacing child restraint is not suitable for use in this vehicle, infants should not be transported in it. SMALL CHILDREN Children that are over 1 year old and weigh at least 20 lbs (9 kg) should remain in a rear-facing child restraint as long as possible up to the height or weight limit of the child restraint. Children who outgrow the height or weight limit of the rearfacing child restraint and are at least 1 year old should be secured in a forward-facing child restraint with a harness. Refer to the manufacturer’s instructions for minimum and maximum weight and height recommendations. NISSAN recommends that small children be placed in child restraints that comply with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. You should choose a child restraint that fits your vehicle and always follow the manufacturer’s instructions for installation and use. LARGER CHILDREN Children should remain in a forward-facing child restraint with a harness until they reach the maximum height or weight limit allowed by the child restraint manufacturer. Once a child outgrows the height or weight limit of the harness-equipped forward-facing child restraint, NISSAN recommends that the child be placed in a commercially available booster seat to obtain proper seat belt fit. For a seat belt to fit properly, the booster seat should raise the child so that the shoulder belt is properly positioned across the chest and the top, middle portion of the shoulder. The shoulder belt should not cross the neck or face and should not fall off the shoulder. The lap belt should lie snugly across the lower hips or upper thighs, not the abdomen. A booster seat can only be used in seating positions that have a three-point type seat belt. The booster seat should fit the vehicle seat and have a label certifying that it complies with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. Once the child has grown so the shoulder belt is no longer on or near the face and neck, and the lap belt can be positioned properly across the lower hips or upper thighs, use the seat belt without the booster seat. Safety—Seats, seat belts and supplemental restraint system 1-19 CHILD RESTRAINTS – Infants and children should never be held on anyone’s lap. Even the strongest adult cannot resist the forces of a collision. – Do not put a seat belt around both a child and another passenger. – Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An inflating supplemental air bag could seriously injure or kill your child. ARS1098 PRECAUTIONS ON CHILD RESTRAINTS WRS0256 WARNING ● Failure to follow the warnings and instructions for proper use and installation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions for installation and use. 1-20 Safety—Seats, seat belts and supplemental restraint system – Never let an infant who requires the use of a rear-facing child restraint ride in this vehicle. – Be sure to purchase a child restraint that will fit the child and vehicle. Some child restraints may not fit properly in your vehicle. – Keep seatbacks as upright as possible after fitting the child restraint. – Infants and children should always be placed in an appropriate child restraint while in the vehicle. ● When the child restraint is not in use, keep it secured with a seat belt. In a sudden stop or collision, loose objects can injure occupants or damage the vehicle. CAUTION A child restraint in a closed vehicle can become very hot. Check the seating surface and buckles before placing a child in the child restraint. Several manufacturers offer child restraints for infants and children of various sizes. When selecting any child restraint, keep the following points in mind: ● Choose only a restraint with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. ● Check the child restraint in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system. ● If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight. Always follow all recommended procedures. All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. Canadian law requires the top tether strap on forward-facing child restraints be secured to the designated anchor point on the vehicle. TOP TETHER ANCHOR WARNING ● Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages. The child restraint will not be properly installed using the damaged anchorages, and a child could be seriously injured or killed in a collision. ● Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or cargo that contacts the top tether strap may damage it during a collision. A child could be seriously injured or killed in a collision if the top tether strap is damaged. ● Be sure to follow the child restraint manufacturer’s instructions for installation. Safety—Seats, seat belts and supplemental restraint system 1-21 FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING LRS2050 1. Top tether strap 2. Anchor point Top tether anchor point location The anchor point is located on the front passenger seatback as shown. WRS0256 REAR-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING ● Never install a rear-facing child restraint in the front seat. An inflating supplemental air bag could seriously injure or kill your child. ● Never let an infant who requires the use of a rear-facing child restraint ride in this vehicle. 1-22 Safety—Seats, seat belts and supplemental restraint system The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the operation of the front passenger air bag. For additional information, refer to “Front passenger air bag and status light” in this section. the rear-facing direction and, therefore, must not be used in the front seat. 2. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions. The back of the child restraint should be secured against the vehicle seatback. WRS0699 Forward-facing (front passenger seat) – step 1 For additional information, refer to all Warnings and Cautions in the “Child Safety” and “Child Restraint” sections of this manual before installing a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be placed in a forward-facing direction only. Move the seat to the rearmost position. Child restraints for infants must be used in If necessary, adjust or remove the head restraint/headrest to obtain the correct child restraint fit. If the head restraint/headrest is removed, store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to “Head restraints/headrests” in this section for head restraint/headrest adjustment, removal and installation information. If the seating position does not have an adjustable head restraint/headrest and it is interfering with the proper child restraint fit, try another seating position or a different child restraint. WRS0680 Forward-facing – step 3 3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor point. For additional information, refer to “Installing top tether strap” in this section. Do not install child restraints that require the use of a top tether strap in seating positions that do not have a top tether anchor. Safety—Seats, seat belts and supplemental restraint system 1-23 LRS0667 Forward-facing – step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the ALR mode (child restraint mode). It reverts to ELR mode when the seat belt is fully retracted. LRS0668 Forward-facing – step 5 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. WRS0681 Forward-facing – step 6 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. Tighten the tether strap according to the manufacturer’s instructions to remove any slack. 1-24 Safety—Seats, seat belts and supplemental restraint system 9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 2 through 8. WRS0698 Forward-facing – step 8 8. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and check to see if the belt holds the restraint in place. If the restraint is not secure, tighten the seat belt as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles. WRS0475 Forward-facing – step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag should illuminate. If this status light light is not illuminated refer to “Front passenger air bag and status light” in this section. Have the system checked by a NISSAN dealer. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled. Safety—Seats, seat belts and supplemental restraint system 1-25 WARNING Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages. The child restraint will not be properly installed using the damaged anchorage, and a child could be seriously injured or killed in a collision. LRS2470 Front passenger seat A 䊊 B 䊊 Top tether strap Anchor point INSTALLING TOP TETHER STRAP (front passenger seat) The child restraint top tether strap must be used when installing the child restraint with the seat belts. First, secure the child restraint with the seat belt. Before securing the child restraint with the seat belt, 1. If necessary, raise or remove the head restraint/headrest to position the top tether A over the top of the seatback. If the strap 䊊 head restraint/headrest is removed, store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional information, refer to “Head restraints/headrests” in this section for head restraint/headrest adjustment, removal and installation information. A between the 2. Route the top tether strap 䊊 head restraint/headrest and the top of the seatback. 1-26 Safety—Seats, seat belts and supplemental restraint system 3. Secure the tether strap to the tether anchor B on the seatback. point 䊊 4. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details. BOOSTER SEATS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: – Make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the stomach. – Make sure the shoulder belt is not behind the child or under the child’s arm. – A booster seat must only be installed in a seating position that has a lap/shoulder belt. LRS2479 A. Low back booster seat B. High back booster seat LRS2047 LRS0454 Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. ● Check the booster seat in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system. Safety—Seats, seat belts and supplemental restraint system 1-27 ● Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears. For example, if a low back booster seat is chosen, the vehicle seatback must be at or above the center of the child’s ears. If the seatback is lower than the center of the child’s ears, a high back booster seat should be used. For additional information, refer to all Warnings and Cautions in the “Child Safety”, “Child Restraint” and “Booster Seats” sections of this manual before installing a child restraint. Follow these steps to install a booster seat in the front passenger seat: ● If the booster seat is compatible with your vehicle, place the child in the booster seat and check the various adjustments to be sure the booster seat is compatible with the child. Always follow all recommended procedures. All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. The instructions in this section apply to booster seat installation in the front passenger seat. Booster seat installation CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. 1-28 Safety—Seats, seat belts and supplemental restraint system WRS0699 1. If you must install a booster seat in the front seat, move the seat to the rearmost position. 2. Position the booster seat on the seat. Only place it in a front-facing direction. Always follow the booster seat manufacturer’s instructions. If the seating position does not have an adjustable head restraint/headrest and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s instructions for adjusting the seat belt routing. LRS0454 Front passenger position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint/headrest to obtain the correct booster seat fit. If the head restraint/headrest is removed, store it in a secure place. Be sure to reinstall the head restraint/headrest when the booster seat is removed. For additional information, refer to “Head restraints/headrests” in this section for head restraint/headrest adjustment, removal and installation information. 5. Pull the shoulder belt portion of the seat belt toward the retractor to take up extra slack. Be sure the shoulder belt is positioned across the top, middle portion of the child’s shoulder. Be sure to follow the booster seat manufacturer’s instructions for adjusting the seat belt routing. 6. Follow the warnings, cautions and instructions for properly fastening a seat belt shown in “Three-point type seat belt with retractor” in this section. WRS0475 7. If the booster seat is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag may or may not illuminate, status light depending on the size of the child and the type of booster seat being used. For additional information, refer to “Front passenger air bag and status light” in this section. Safety—Seats, seat belts and supplemental restraint system 1-29 SUPPLEMENTAL RESTRAINT SYSTEM (SRS) PRECAUTIONS ON SRS This SRS section contains important information concerning the following systems: ● Driver and passenger supplemental frontimpact air bag (NISSAN Advanced Air Bag System) ● Front seat-mounted side-impact supplemental air bag ● Roof-mounted curtain side-impact and rollover supplemental air bag ● Seat belt with pretensioner Supplemental front-impact air bag system The NISSAN Advanced Air Bag System can help cushion the impact force to the head and chest of the driver and front passenger in certain frontal collisions. Front seat-mounted side-impact supplemental air bag system This system can help cushion the impact force to the chest and pelvis area of the driver and front passenger in certain side-impact collisions. The side air bags are designed to inflate on the side where the vehicle is impacted. Roof-mounted curtain side-impact and rollover supplemental air bag system This system can help cushion the impact force to the head of occupants in front outboard seating positions in certain side-impact or rollover collisions. In a side impact, the curtain air bags are designed to inflate on the side where the vehicle is impacted. In a rollover, curtain air bags are designed to inflate and remain inflated for a short time. The SRS is designed to supplement the collision protection provided by the driver and front passenger seat belts and is not a substitute for them. Seat belts should always be correctly worn and the occupant seated a suitable distance away from the steering wheel, instrument panel and door finishers. For additional information, refer to “Seat belts” in this section for instructions and precautions on seat belt usage. The supplemental air bags operate only when the ignition switch is placed in the ON position. After placing the ignition switch in the ON position, the supplemental air bag warning light illuminates. The supplemental air bag warning light will turn off after about 7 seconds if the system is operational. 1-30 Safety—Seats, seat belts and supplemental restraint system the seatback and as far away as practical from the steering wheel or instrument panel. Always use the seat belts. ● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt usage then inflates the air bags as needed. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. WRS0031 WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. ● The front passenger air bag will not inflate if the passenger air bag status light is lit or if the front passenger seat is unoccupied. For additional information, refer to “Front passenger air bag and status light” in this section. ● The seat belts and the front air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor. The front air bags inflate with great force. Even with the NISSAN Advanced Air Bag System, if you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash. You may also receive serious or fatal injuries from the front air bag if you are up against it when it inflates. Always sit back against ● The front passenger seat is equipped with an Occupant Classification Sensor (weight sensor) that turns the front passenger air bag OFF under some conditions. This sensor is only used in this seat. Failure to be properly seated and wearing the seat belt can increase the risk or severity of injury in an accident. For additional information, refer to “Front passenger air bag and status light” in this section. ● Keep hands on the outside of the steering wheel. Placing them inside the steering wheel rim could increase the risk that they are injured when the front air bag inflates. Safety—Seats, seat belts and supplemental restraint system 1-31 ARS1133 ARS1041 WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. 1-32 Safety—Seats, seat belts and supplemental restraint system ARS1042 ARS1043 ARS1044 Safety—Seats, seat belts and supplemental restraint system 1-33 ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An inflating front air bag could seriously injure or kill your child. For additional information, refer to “Child restraints” in this section. ARS1045 ARS1046 WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. ● Pre-teens and children should be properly restrained in the rear seat if possible. 1-34 Safety—Seats, seat belts and supplemental restraint system WRS0431 SSS0162 SSS0159 WARNING Front seat-mounted side-impact supplemental air bags and roof-mounted curtain side-impact and rollover supplemental air bags: ● The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact, or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. Safety—Seats, seat belts and supplemental restraint system 1-35 WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front seat or near the side roof rails. Do not allow anyone sitting in the front seats to extend their hand out of the window or lean against the door. Some examples of dangerous riding positions are shown in the previous illustrations. ● Do not use seat covers on the front seatbacks. They may interfere with side air bag inflation. LRS2215 1-36 Safety—Seats, seat belts and supplemental restraint system NISSAN Advanced Air Bag System (front seats) 1. Roof-mounted curtain side-impact and rollover supplemental air bags 2. Supplemental front-impact air bag modules 3. Air bag Control Unit (ACU) 4. Occupant classification sensor (weight sensor) 5. Front seat-mounted side-impact supplemental air bag modules WARNING To ensure proper operation of the passenger’s advanced air bag system, please observe the following items. ● Do not place heavy loads heavier than 2.2 lb (1 kg) on the seatback, in the under-seat storage bin, head restraint/headrest or in the seatback pocket. ● Do not store luggage behind the seat that can press into the seatback. ● If a forward facing child restraint is installed in the front passenger seat, do not position the front passenger seat so the child restraint contacts the instrument panel. If the child restraint does contact the instrument panel, the system may determine the seat is occupied and the passenger air bag may deploy in a collision. Also the front passenger air bag status light may not illuminate. For additional information, refer to “Child restraints” in this section for information about installing and using child restraints. ● Confirm the operating condition with the front passenger air bag status light. ● If you notice that the front passenger air bag status light is not operating as described in this section, please take your vehicle to your NISSAN dealer to check the occupant classification system. This vehicle is equipped with the NISSAN Advanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regulations. It is also permitted in Canada. However, all of the information, cautions and warnings in this manual still apply and must be followed. The driver supplemental front-impact air bag is located in the center of the steering wheel. The passenger supplemental front-impact air bag is mounted in the dashboard above the glove box. The front air bags are designed to inflate in higher severity frontal collisions, although they may inflate if the forces in another type of collision are similar to those of a higher severity frontal impact. They may not inflate in certain frontal collisions. Vehicle damage (or lack of it) is not always an indication of proper front air bag system operation. The NISSAN Advanced Air Bag System has dual stage inflators. It also monitors information from the crash zone sensor and the Air bag Control Unit (ACU). Inflator operation is based on the severity of a collision and seat belt usage for the driver. For the front passenger, the occupant classification sensors are also monitored. Based on information from the sensors, only one front air bag may inflate in a collision, depending on the collision severity. Additionally, the front passenger air bag may be automatically turned off under some conditions, depending on the weight detected on the passenger seat and how the seat belt is used. If the front passenger air bag is OFF, the passenger air bag status light will be illuminated (if the seat is unoccupied, the light will not be illuminated, but the air bag will be off). For additional information, refer to “Front passenger Safety—Seats, seat belts and supplemental restraint system 1-37 air bag and status light” in this section. One front air bag inflating does not indicate improper performance of the system. force of the front air bag inflating can increase the risk of injury if the occupant is too close to, or is against, the front air bag module during inflation. If you have any questions about your air bag system, please contact NISSAN or your NISSAN dealer. If you are considering modification of your vehicle due to a disability, you may also contact NISSAN. Contact information is contained in the front of this Owner’s Manual. The front air bags deflate quickly after a collision. When a front air bag inflates, a fairly loud noise may be heard, followed by the release of smoke. This smoke is not harmful and does not indicate a fire. Care should be taken to not inhale it, as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. The front air bags operate only when the ignition switch is placed in the ON position. After placing the ignition switch in the ON position, the supplemental air bag warning light illuminates. The supplemental air bag warning light will turn off after about 7 seconds if the system is operational. Front air bags, along with the use of seat belts, help to cushion the impact force on the face and chest of the front occupants. They can help save lives and reduce serious injuries. However, an inflating front air bag may cause facial abrasions or other injuries. Front air bags do not provide restraint to the lower body. Even with NISSAN advanced air bags, seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the steering wheel or instrument panel. The front air bags inflate quickly in order to help protect the front occupants. Because of this, the 1-38 Safety—Seats, seat belts and supplemental restraint system WRS0475 Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some conditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is necessary for most effective protection. Failure to follow all instructions in this manual concerning the use of seats, seat belts and child restraints can increase the risk or severity of injury in an accident. Status light The front passenger seat is equipped with an Occupant Classification Sensor (weight sensor) that turns the front passenger air bag on or off depending on the weight applied to the passenger seat. The status of the passenger air bag (ON or OFF) is indicated by a passenger air bag which is located on the instrustatus light ment panel. After the ignition switch is placed in the “ON” position, the front passenger air bag status light on the instrument panel illuminates for about 7 sections and then turns off or remains illuminated depending on the front passenger seat occupied status. The light operates as follows: The right front passenger air bag status is located under the climate controls. light After the ignition switch is placed in the ⬙ON⬙ position, the front passenger air bag status light on the instrument panel illuminates for about 7 seconds and then turns off or operates depending on the front passenger seat occupied status. The light operates as follows: ● Unoccupied passenger’s seat: The light is OFF and the front passenger air bag is OFF and will not inflate in a collision. ● Passenger’s seat occupied by a small adult, child or child restraint as outlined in this illuminates to indicate section: The that the front passenger air bag is OFF and will not inflate in a collision. ● Occupied passenger seat and the passenger meets the conditions outlined in this is OFF to indicate section: The light that the front passenger air bag is operational. In addition to the above, certain objects placed on the front passenger seat may also cause the light to operate as described above depending on their weight. For additional information related to the normal operation and troubleshooting of this Occupant Classification Sensor system, please refer to “Normal operation” and “Troubleshooting” in this section. Front passenger air bag The right front passenger air bag is designed to automatically turn OFF when the vehicle is operated under some conditions as described below in accordance with U.S. regulations. If the front passenger air bag is OFF it will not inflate in a collision. The driver air bag and other air bags in your vehicle are not part of this system. The purpose of the regulation is to help reduce the risk of injury or death from an inflating air bag to certain front passenger seat occupants, such as children, by requiring the air bag to be automatically turned OFF. Certain sensors are used to meet the requirements. The occupant classification sensors (weight sensors) are on the seat cushion frame under the front passenger seat and are designed to detect am occupant and objects on the seat. For example, if a child is in the front passenger seat, the Advanced Air Bag system is designed to turn the passenger air bag OFF in accordance with the regulations. Also, if a child restraint of the type specified in the regulations is on the seat, the occupant classification sensors can detect it and cause the air bag to turn OFF. Front passenger seat adult occupants who are properly seated and using the seat belt as outlined in this manual should not cause the passenger air bag to be automatically turned OFF. For small adults it may be turned OFF, however if the occupant takes his/her weight off the seat cushion (for example, by not sitting upright, by sitting on an edge of the seat, or by otherwise being out of position), this could cause the sensor to turn the air bag OFF. Always be sure to be seated and wearing the seat belt properly for the most effective protection by the seat belt and supplemental air bag. Safety—Seats, seat belts and supplemental restraint system 1-39 NISSAN recommends that pre-teens and children be properly restrained in a rear seat. NISSAN also recommends that appropriate child restraints and booster seats be properly installed in a rear seat. If this is not possible, the occupant classification sensors are designed to operate as described above to turn the front passenger air bag OFF for specified child restraints as required by the regulations. Failing to properly secure child restraints and to use the ALR mode (child restraint mode) may allow the restraint to tip or move in an collision or sudden stop. This can also result in the passenger air bag inflating in a collision instead of being OFF. For additional information, refer to “Child restraints” in this section for proper use and installation. If the right front passenger seat is not occupied the passenger air bag is designed not to inflate in a collision. However, heavy objects placed on the seat could result in air bag inflation, because of the object’s weight detected by the occupant classification sensor. Other conditions could also result in air bag inflation, such as if a child is standing on the seat, or if two children are on the seat, contrary to the instructions in this manual. Always be sure that you and all vehicle occupants are seated and restrained properly. Using the passenger air bag status light, you can monitor when the front passenger air bag is automatically turned OFF with the seat occupied. The light will not illuminate when the right front passenger seat is unoccupied. If an adult occupant is in the seat but the passenger air bag status light is illuminated (indicating that the air bag is OFF), it could be that the person is a small adult, or is not sitting on the seat properly or not using the seat belt properly. If a child restraint must be used in the front seat, the passenger air bag status light may or may not be illuminated, depending on the size of the child and the type of child restraint being used. If the air bag status light is not illuminated (indicating that the air bag might inflate in a collision), it could be that the child restraint or seat belt is not being used properly. Make sure that the child restraint is installed properly, the seat belt is used properly and the occupant is positioned properly. If the air bag status light is not illuminated, reposition the occupant or child restraint in a rear seat. If the passenger air bag status light will not illuminate even though you believe that the child restraint, the seat belts and the occupant are properly positioned, the system may be sensing an unoccupied seat (in which case the air bag is OFF). Your NISSAN dealer can check that the system is OFF by using a special tool. However, until you have confirmed with your dealer that your air bag is working properly, try a different child restraint. 1-40 Safety—Seats, seat belts and supplemental restraint system The air bag system and passenger air bag status light will take a few seconds to register a change in the passenger seat status. For example, if a large adult who is sitting in the front passenger seat exits the vehicle, the passenger air bag status light will go from OFF to ON for a few seconds and then to OFF. This is normal system operation and does not indicate a malfunction. If a malfunction occurs in the front passenger air bag system, the supplemental air bag warning , located in the meter and gauges area light on the driver’s side of the instrument panel, will blink. Have the system checked by a NISSAN dealer. Normal operation In order for the occupant classification system to classify the right front passenger based on weight, please follow the precautions and steps outlined below: Precautions ● Make sure there are no objects weighing over 2.2 lbs (1 kg) hanging on the seat or placed in the seat-back pocket. ● Make sure that a child seat or other object is not pressing against the rear of the seatback. ● Make sure that a rear passenger is not pushing or pulling on the back of the front passenger’s seat. ● Make sure that the front seat or seat-back is not forced back against an object on the seat or floor behind it. ● Make sure that there is no object placed under the front passenger’s seat. Steps 1. Adjust the seat as outlined in the “Seats” section of the Owner’s Manual. Sit upright, leaning against the seat back, and centered on the seat cushion with your feet comfortably extended to the floor. 2. Make sure there are no objects on the occupant’s lap. 3. Fasten the seat belt as outlined in the “Seat belts” section of the Owner’s Manual. 4. Remain in this position for 30 seconds allowing the system to classify the passenger before the vehicle is put into motion. 5. Ensure proper classification by checking the passenger air bag status light. NOTE: This vehicle’s occupant classification system locks the classification during driving so it is important that you confirm that the passenger is properly classified prior to driving. Also, the occupant classification system may recalculate the weight of the occupant when the vehicle comes to a stop (i.e. stop light, stop sign etc.), so front passenger seat occupants should continue to remain seated as outlined above. Troubleshooting If you think the passenger air bag status light is incorrect: 1. If the light is ON with no front passenger and no objects on the front passenger seat: This may be due to the following conditions that may be interfering with the weight sensors: ● An object weighing over 2.2 lbs (1 kg) hanging on the seat or placed in the seat-back pockets. ● A child seat or other object pressing against the rear of the seat-back. ● A rear passenger pushing or pulling on the back of the front passenger’s seat. ● The front seat or seat-back is forced back is forced back against an object on the seat or floor behind it. ● An object placed under the front passenger’s seat. ● An object placed between the seat cushion and center console or between door and cushion. If the vehicle is moving, please come to a stop when it is safe to do so. Check and correct any of the above conditions. Restart the vehicle and wait one minute. NOTE: A system check will be performed during which the passenger air bag status light will remain lit for about 7 sections initially. If the light is still on after this, the vehicle should be checked by a NISSAN dealer as soon as possible. 2. If the light is ON with an adult occupying the front passenger seat: ● Occupant is a small adult → the air bag light is functioning as intended. The front passenger air bag is suppressed. Safety—Seats, seat belts and supplemental restraint system 1-41 However, if the occupant is not a small adult, then this may be due to the following conditions that may be interfering with the weight sensors: ● Occupant is not sitting upright, leaning against the seat back, and centered on the seat cushion with feet comfortably extended to the floor. ● A child seat or other object pressing against the rear of the seat-back. NOTE: A system check will be performed during which the passenger air bag status light will remain lit for about 7 seconds initially. If the light is still on after this, the person should be advised not to ride in the front passenger seat and the vehicle should be checked by a NISSAN dealer as soon as possible. ● A rear passenger pushing or pulling on the back of the front passenger’s seat. 3. If the light is OFF with small adult, child or child restraint occupying the front passenger seat. ● The front seat or seat-back is forced back against an object on the seat or floor behind it. This may be due to the following conditions that may be interfering with the weight sensors: ● An object placed under the front passenger’s seat. ● Small adult or child is not sitting upright, leaning against the seat back, and centered on the seat cushion with feet comfortably extended to the floor. ● An object placed between the seat cushion and center console or between the seat cushion and the door. If the vehicle is moving, please come to a stop when it is safe to do so. Check and correct any of the above conditions. Restart the vehicle and wait one minute. ● The child restraint is not properly installed, as outlined in the “Child restraints” section of the Owner’s Manual. ● An object weighing over 2.2 lbs (1 kg) hanging on the seat or placed in the seat-back pocket. ● A child seat or other object pressing against the rear of the seat-back. 1-42 Safety—Seats, seat belts and supplemental restraint system ● A rear passenger pushing or pulling on the back of the front passenger’s seat. ● The front seat or seat-back is forced back against an object on the seat or floor behind it. ● An object placed under the front passenger’s seat. ● An object placed between the seat cushion and center console. If the vehicle is moving, please come to a stop when it is safe to do so. Check and correct any of the above conditions. Restart the vehicle and wait one minute. NOTE: A system check will be performed during which the passenger air bag status light will remain lit for about 7 seconds initially. If the light is still OFF after this, the small adult, child or child restraint should be repositioned in the rear seat and the vehicle should be checked by a NISSAN dealer as soon as possible. Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steering wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such objects may become dangerous projectiles and cause injury if the front air bags inflate. ● Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave permanent impressions in the seat. Such objects can damage the seat or occupant classification sensors (weight sensors). This can affect the operation of the air bag system and result in serious personal injury. ● Do not use water or acidic cleaners (hot steam cleaners) on the seat. This can damage the seat or occupant classification sensors. This can also affect the operation of the air bag system and result in serious personal injury. ● Immediately after inflation, several front air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the supplemental air bag system. This is to prevent accidental inflation of the supplemental air bag or damage to the supplemental air bag system. ● Do not make unauthorized changes to your vehicle’s electrical system, suspension system or front end structure. This could affect proper operation of the front air bag system. ● Tampering with the front air bag system may result in serious personal injury. Tampering includes changes to the steering wheel and the instrument panel assembly by placing material over the steering wheel pad and above the instrument panel or by installing additional trim material around the air bag system. ● Modifying or tampering with the front passenger seat may result in serious personal injury. For example, do not change the front seats by placing material on the seat cushion or by installing additional trim material, such as seat covers, on the seat that are not specifically designed to assure proper air bag operation. Additionally, do not stow any objects under the front passenger seat or the seat cushion and seatback. Such objects may interfere with the proper operation of the occupant classification sensor (weight sensor). ● No unauthorized changes should be made to any components or wiring of the seat belt system. This may affect the front air bag system. Tampering with the seat belt system may result in serious personal injury. ● Removing or modifying the front passenger seat may affect the function of the air bag and result in serious personal injury. Safety—Seats, seat belts and supplemental restraint system 1-43 are designed to inflate on the side where the vehicle is impacted. They may not inflate in certain side collisions. ● Work on and around the front air bag system should be done by a NISSAN dealer. Installation of electrical equipment should also be done by a NISSAN dealer. The Supplemental Restraint System (SRS) wiring harnesses* should not be modified or disconnected. Unauthorized electrical test equipment and probing devices should not be used on the air bag system. ● A cracked windshield should be replaced immediately by a qualified repair facility. A cracked windshield could affect the function of the supplemental air bag system. *The SRS wiring harness connectors are yellow and orange for easy identification. When selling your vehicle, we request that you inform the buyer about the front air bag system and guide the buyer to the appropriate sections in this Owner’s Manual. Curtain air bags are also designed to inflate in certain types of rollover collisions or near rollovers. As a result, certain vehicle movements (for example, during severe off-roading) may cause the curtain air bags to inflate. Vehicle damage (or lack of it) is not always an indication of proper side air bag and curtain air bag operation. LRS2049 Front seat-mounted side-impact supplemental air bag and roofmounted curtain side-impact and rollover supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails. All of the information, cautions and warnings in this manual must be followed. The side air bags and curtain air bags are designed to inflate in higher severity side collisions, although they may inflate if the forces in another type of collision are similar to those of a higher severity impact. They 1-44 Safety—Seats, seat belts and supplemental restraint system When the side air bags and curtain air bags inflate, a fairly loud noise may be heard, followed by release of smoke. This smoke is not harmful and does not indicate a fire. Care should be taken not to inhale it, as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. Side air bags, along with the use of seat belts, help to cushion the impact force on the chest and pelvis of the front occupants. Curtain air bags help to cushion the impact force to the head of occupants in the front and rear outboard seating positions. They can help save lives and reduce serious injuries. However, an inflating side air bag or curtain air bag may cause abrasions or other injuries. Side air bags and curtain air bags do not provide restraint to the lower body. The seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the side air bag. All passengers should be seated as far away as practical from the door finishers and side roof rails. The side air bags and curtain air bags inflate quickly in order to help protect the occupants. Because of this, the force of the side air bags and curtain air bags inflating can increase the risk of injury if the occupant is too close to, or is against, these air bag modules during inflation. The side air bag will deflate quickly after the collision is over. The curtain air bag will remain inflated for a short time. The side air bags and curtain air bags operate only when the ignition switch is placed in the ON position. After placing the ignition switch in the ON position, the supplemental air bag warning light illuminates. The supplemental air bag warning light will turn off after about 7 seconds if the system is operational. WARNING ● Do not place any objects near the seatback of the front seats. Also, do not place any objects (an umbrella, bag, etc.) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if a side air bag inflates. ● Right after inflation, several side air bag and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems. This is to prevent damage to or accidental inflation of the side air bag and curtain air bag systems. ● Do not make unauthorized changes to your vehicle’s electrical system, suspension system or side panel. This could affect proper operation of the side air bag and curtain air bag systems. ● Tampering with the side air bag system may result in serious personal injury. For example, do not change the front seats by placing material near the seatbacks or by installing additional trim material, such as seat covers, around the side air bag. ● Work around and on the side air bag and curtain air bag systems should be done by a NISSAN dealer. Installation of electrical equipment should also be done by a NISSAN dealer. The SRS wiring harnesses* should not be modified or disconnected. Unauthorized electrical test equipment and probing devices should not be used on the side air bag or curtain air bag systems. * The SRS wiring harness or connectors are yellow or orange for easy identification. When selling your vehicle, we request that you inform the buyer about the side air bags and curtain air bag system and guide the buyer to the appropriate sections in this Owner’s Manual. Safety—Seats, seat belts and supplemental restraint system 1-45 Seat belts with pretensioners WARNING ● The pretensioners cannot be reused after activation. They must be replaced together with the retractor and buckle as a unit. ● If the vehicle becomes involved in a collision but a pretensioner is not activated, be sure to have the pretensioner system checked and, if necessary, replaced by your NISSAN dealer. ● No unauthorized changes should be made to any components or wiring of the pretensioner system. This is to prevent damage to or accidental activation of the pretensioners. Tampering with the pretensioner system may result in serious personal injury. ● Work around and on the pretensioner system should be done by a NISSAN dealer. Installation of electrical equipment should also be done by a NISSAN dealer. Unauthorized electrical test equipment and probing devices should not be used on the pretensioner system. ● If you need to dispose of a pretensioner or scrap the vehicle, contact a NISSAN dealer. Incorrect disposal procedures could cause personal injury. The pretensioner system may activate with the supplemental air bag system in certain types of collisions. Working with the seat belt retractor, the pretensioner helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants. The pretensioner is encased with the seat belt retractor. These seat belts are used the same way as conventional seat belts. When a pretensioner activates, smoke is released and a loud noise may be heard. This smoke is not harmful and does not indicate a fire. Care should be taken not to inhale it, as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. After pretensioner activation, load limiters allow the seat belt to release webbing (if necessary) to reduce forces against the chest. 1-46 Safety—Seats, seat belts and supplemental restraint system is The supplemental air bag warning light used to indicate malfunctions in the pretensioner system. For additional information, refer to “Supplemental air bag warning light” in this section. If the operation of the supplemental air bag warning light indicates there is a malfunction, have the system checked by a NISSAN dealer. When selling your vehicle, we request that you inform the buyer about the pretensioner system and guide the buyer to the appropriate sections in this Owner’s Manual. If any of the following conditions occur, the front air bag, side air bag, curtain air bag and pretensioner systems need servicing: ● The supplemental air bag warning light remains on after approximately 7 seconds. ● The supplemental air bag warning light flashes intermittently. ● The supplemental air bag warning light does not come on at all. LRS2216 1. SRS Air bag warning labels The warning labels are located on the surface of the sun visor. SUPPLEMENTAL AIR BAG WARNING LABELS Warning labels about the supplemental frontimpact air bag system are placed in the vehicle as shown in the illustration. LRS0100 SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, monitors the circuits for the air bag systems, pretensioners and all related wiring. When the ignition key is in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. Under these conditions, the front air bag, side air bag and curtain air bag or pretensioner systems may not operate properly. They must be checked and repaired. Take your vehicle to the nearest NISSAN dealer. WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain and rollover air bag and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible. Safety—Seats, seat belts and supplemental restraint system 1-47 Repair and replacement procedure The front air bags, side air bags, curtain supplemental air bags and pretensioners are designed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warning light remains illuminated after inflation has occurred. Repair and replacement of these supplemental air bag systems should be done only by a NISSAN dealer. When maintenance work is required on the vehicle, the front air bags, side air bags, curtain air bags, pretensioners and related parts should be pointed out to the person performing the maintenance. The ignition key should always be in the LOCK position when working under the hood or inside the vehicle. WARNING ● Once a front air bag, side air bag or curtain air bag has inflated, the air bag module will not function again and must be replaced. Additionally, the activated pretensioners must also be replaced. The air bag module and pretensioners should be replaced by a NISSAN dealer. The air bag module and pretensioner cannot be repaired. ● The front air bag, side air bag, curtain air bag systems and the pretensioner system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. ● If you need to dispose of a supplemental air bag or pretensioners or scrap the vehicle, contact a NISSAN dealer. Correct supplemental air bag and pretensioner system disposal procedures are set forth in the appropriate NISSAN Service Manual. Incorrect disposal procedures could cause personal injury. ● If there is an impact to your vehicle from any direction, your occupant detection sensor (ODS) should be checked by a NISSAN dealer to verify it is still functioning correctly. The ODS should be checked even if no air bags deploy as a result of the impact. Failure to verify proper ODS function may result in an improper air bag deployment resulting in injury or death. 1-48 Safety—Seats, seat belts and supplemental restraint system 2 Instruments and controls Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-3 Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Trip computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Outside temperature display (if so equipped) . . . . . . 2-7 Warning/indicator lights and audible reminders . . . . . . . 2-8 Checking bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Audible reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Security systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Vehicle security system (if so equipped) . . . . . . . . . . 2-15 NISSAN vehicle immobilizer system . . . . . . . . . . . . . 2-17 Windshield wiper and washer switch . . . . . . . . . . . . . . . 2-18 Switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Rear window and outside mirror (if so equipped) defroster switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 Headlight and turn signal switch. . . . . . . . . . . . . . . . . . . . 2-19 Headlight control switch. . . . . . . . . . . . . . . . . . . . . . . . 2-19 Daytime running light system. . . . . . . . . . . . . . . . . . . . 2-20 Instrument brightness control . . . . . . . . . . . . . . . . . . . 2-21 Turn signal switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22 Vehicle Dynamic Control (VDC) off switch . . . . . . . . . . . 2-22 Rear sonar system off switch (if so equipped). . . . . . . . 2-22 Power outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24 Map pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24 Storage trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24 Under-seat storage bins. . . . . . . . . . . . . . . . . . . . . . . . 2-25 Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25 Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25 D-Rings (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 2-26 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29 Map lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29 Cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30 INSTRUMENT PANEL 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. LIC2896 1. 2. 3. 4. Vents (P. 4-12) Headlight/turn signal switch (P. 2-19) Driver’s supplemental air bag /horn (P. 1-30, 2-22) Meters and gauges (P. 2-3) 2-2 Instruments and controls 5. 6. 7. Cruise control switches (if so equipped) (P. 5-16) Windshield wiper/washer switch (P. 2-18) Rear window and outside mirror (if so equipped) defroster switch (P. 2-22) Audio system (P. 4-21) Passenger’s supplemental air bag (P. 1-30) Glove box (P. 2-25) Climate controls (P. 4-13) Front passenger air bag status light (P. 2-13) Cup holders (P. 2-25) Shift lever (P. 5-12) Hazard warning flasher switch (P. 6-2) Rear sonar system off switch (P. 2-22) Ignition switch (P. 5-7) Audio control switches (if so equipped) (P. 4-50) Fuel-filler lid release lever (P. 3-14)/ Hood release lever (P. 3-13) Fuse box (P. 8-20) Vehicle Dynamic Control (VDC) off switch (P. 2-22)/Electronic outside rearview mirror control switch (if so equipped) (P. 3-18) For additional information, refer to the page number indicated in parentheses for operating details. METERS AND GAUGES LIC2118 SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates the vehicle speed. LIC2283 1. 2. 3. 4. 5. Tachometer Speedometer Change/reset button Instrument brightness control Continuously Variable Transmission (CVT) position indicator 6. 7. Odometer/twin trip odometer/trip computer Fuel gauge Instruments and controls 2-3 Changing the display: 3 to change the Press the change/reset button 䊊 display as follows: → Trip → Odometer (ODO) → Trip Instant fuel consumption → Average fuel consumption → DTE (cruising range) → Outside air temperature (if so equipped) → Odometer (ODO) Resetting the trip odometer: 3 for more than Press the change/reset button 䊊 1 second to reset the currently displayed trip odometer to zero. LIC2467 Odometer/Twin trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. 1 records the total distance the The odometer 䊊 vehicle has been driven. 2 records the distance The twin trip odometer 䊊 of individual trips. 2-4 Instruments and controls LIC2468 Loose fuel cap warning message A for more than Push the change/reset button 䊊 1 second to reset the LOOSE FUEL CAP warning message after the fuel cap has been tightened. For additional information, refer to “Fuelfiller cap” in the “Pre-driving checks and adjustments” section of this manual. each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. For additional information, refer to “Low tire pressure warning light” in the “Instruments and controls” section, “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” section, and “Wheels and tires” in the “Maintenance and do-it-yourself” section of this Owner’s Manual. LIC2880 LIC2107 Check tire pressure warning message TACHOMETER The CHECK TIRE PRES (pressure) warning message is displayed when the low tire pressure warning light is illuminated and low tire pressure is detected. Check and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label. The CHECK TIRE PRES (pressure) warning message turns off when the low tire pressure warning light turns off. The tachometer indicates engine speed in revolutions per minute (rpm). The low tire pressure warning light remains illuminated until the tires are inflated to the recommended COLD tire pressure. The CHECK TIRE PRES (pressure) warning message is displayed 1 . Do not rev the engine into the red zone 䊊 CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause serious engine damage. Instruments and controls 2-5 Refill the fuel tank before the gauge registers E (Empty). indicates that the fuel-filler door is The located on the driver’s side of the vehicle. CAUTION LIC2286 FUEL GAUGE A the approximate fuel The gauge indicates 䊊 level in the tank when the ignition switch is placed in the ON position. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. Type A (if so equipped): The fuel level segments will blink when the amount of fuel in the tank is getting low. Type B (if so equipped): The low fuel warning light will turn on when the amount of fuel in the tank is getting low. 2-6 Instruments and controls ● If the vehicle runs out of fuel, the check engine light may come on. Refuel as soon as possible. After a few driving light should turn off. If trips, the the light remains on after a few driving trips, have the vehicle inspected by a NISSAN dealer. ● For additional information, refer to “Malfunction Indicator Light (MIL)” in this section. LIC2470 TRIP COMPUTER When the ignition switch is placed in the ON position, modes of the trip computer can be A selected by pressing the change/reset button 䊊 on the instrument panel located near the speedometer. The following modes can be selected in B: the display 䊊 ● Trip A ● Trip B ● Instant fuel economy ● Average fuel consumption ● Distance to empty Trip A Measures the distance of one specific trip. you wish to return to the mode that was selected before the warning occurred. Trip B When the fuel level drops even lower, the distance to empty will display (----). Measures the distance of a second specific trip. Trip computer reset Instant fuel consumption Pressing the change/reset button for more than 3 seconds will reset all modes except Trip A and distance to empty. The instant fuel consumption mode shows the instant fuel economy. The display updates instantly when driving. Average fuel consumption The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pressing the change/reset A for more than approximately 1 second. button 䊊 Distance to empty OUTSIDE TEMPERATURE DISPLAY (if so equipped) The outside temperature function provides a display of the outside temperature when the ignition switch is placed in the ON position. The display of positive temperatures is unsigned (blank); negative temperatures are prefixed with a minus sign. The distance to empty mode provides you with an estimation of the distance that can be driven before refueling. The range is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption. The distance to empty includes a low range warning feature: when the fuel level is low, the distance to empty is automatically selected and the digits blink in order to draw the driver’s attenA if tion. Press the trip computer change button 䊊 Instruments and controls 2-7 WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS or Anti-lock Braking System (ABS) warning light Power steering warning light Security indicator light or Brake warning light Seat belt warning light and chime Slip indicator light Charge warning light Supplemental air bag warning light Turn signal/hazard indicator lights Door open warning light Continuously Variable Transmission (CVT) position indicator light Vehicle Dynamic Control (VDC) OFF indicator light Engine oil pressure warning light Cruise main switch indicator light (if so equipped) High temperature warning light (red) Front passenger air bag status light Low fuel warning light High beam indicator light (blue) Low tire pressure warning light Malfunction Indicator Light (MIL) Low windshield-washer fluid warning light (if so equipped) Overdrive OFF indicator light 2-8 Instruments and controls CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: or , , , , , If equipped, the following lights come on briefly and then go off: or , (red), , , , , If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly. WARNING LIGHTS or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly. Have the system checked by a NISSAN dealer. If an ABS malfunction occurs, the anti-lock function is turned off. The brake system then operates normally but without anti-lock assistance. For additional information, refer to “Brake system” in the “Starting and driving” section of this manual. or Brake warning light This light functions for both the parking brake and the foot brake systems. Parking brake indicator When the ignition switch is placed in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light When the ignition switch is placed in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running, with the parking brake not applied, stop the vehicle and perform the following: 1. Check the brake fluid level. Add brake fluid as necessary. For additional information, refer to “Brake fluid” in the “Maintenance and do-it-yourself” section of this manual. 2. If the brake fluid level is correct, have the warning system checked by a NISSAN dealer. WARNING ● Your brake system may not be working properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous. ● Pressing the brake pedal with the engine stopped and/or a low brake fluid level may increase your stopping distance and braking will require greater pedal effort and pedal travel. ● If the brake fluid MINIMUM or MIN fluid reservoir, do brake system has NISSAN dealer. level is below the mark on the brake not drive until the been checked at a Anti-lock Braking System (ABS) warning indicator When the parking brake is released and the brake fluid level is sufficient, if both the brake warning light and the ABS warning light illuminates, it may indicate the ABS is not functioning Instruments and controls 2-9 properly. Have the brake system checked and, if necessary, repaired by a NISSAN dealer promptly. Avoid high-speed driving and abrupt braking. For additional information, refer to “Antilock Braking System (ABS) warning light” in this section. Charge warning light If this light comes on while the engine is running, it may indicate the charging system is not functioning properly. Turn the engine off and check the drive belt. If the belt is loose, broken, missing, or if the light remains on, see a NISSAN dealer immediately. CAUTION Do not continue driving if the drive belt is loose, broken or missing. Door open warning light This light comes on when any of the doors are not closed securely while the ignition switch is placed in the ON position. Engine oil pressure warning light This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, 2-10 Instruments and controls pull off the road in a safe area, stop the engine immediately, and call a NISSAN dealer or other authorized repair shop. The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. For additional information, refer to “Engine oil” in the “Maintenance and do-it-yourself” section of this manual. CAUTION Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by warranty. Turn off the engine as soon as it is safe to do so. High temperature warning light (red) When the ignition switch is placed in the ON position, the high temperature warning light illuminates and then turns off. This indicates that the high temperature sensor in the engine coolant system is operational. CAUTION If the high temperature warning light illuminates while the engine is running, it may indicate the engine temperature is extremely high. Stop the vehicle safely as soon as possible. If the vehicle is overheated, continuing vehicle operation may seriously damage the engine. For additional information, refer to “If your vehicle overheats” in the “In case of emergency” section of this manual. Low fuel warning light This light comes on when the fuel level in the fuel tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches 0 (Empty). There will be a small reserve of fuel in the tank when the fuel gauge reaches 0 (Empty). Low tire pressure warning light Your vehicle is equipped with a TPMS that monitors the tire pressure of all tires except the spare. The low tire pressure warning light warns of low tire pressure or indicates that the TPMS is not functioning properly. After the ignition switch is placed in the ON position, this light illuminates for about 1 second and turns off. the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. Low tire pressure warning: For additional information, refer to ⬙Check tire pressure warning message⬙ in this section and TPMS” in the “Starting and driving” section and in the “In case of emergency” section of this manual. If the vehicle is being driven with low tire pressure, the warning light will illuminate. A CHECK TIRE PRES (pressure) warning message is also displayed in the odometer. When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure of all four tires to the recommended COLD tire pressure shown on the Tire and Loading Information label located in the driver’s door opening. The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, the vehicle must be driven at speeds above 16 mph (25 km/h) to activate the TPMS and turn off the low tire pressure warning light. Use a tire pressure gauge to check the tire pressure. The low tire pressure warning light remains illuminated until the tires are inflated to the recommended COLD tire pressure. The CHECK TIRE PRES warning message is displayed each time TPMS malfunction: If the TPMS is not functioning properly, the low tire pressure warning light will flash for approximately 1 minute when the ignition switch is placed in the ON position. The light will remain on after the 1 minute. Have the system checked by a NISSAN dealer. The CHECK TIRE PRES warning message is not displayed if the low tire pressure warning light illuminates to indicate a TPMS malfunction. For additional information, refer to “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” section and “Tire pressure” in the “Maintenance and do-it-yourself” section of this manual. WARNING ● If the light does not illuminate with the ignition switch placed in the ON position, have the vehicle checked by a NISSAN dealer as soon as possible. ● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label located in the driver’s door opening to turn the low tire pressure warning light OFF. If the light still comes on while driving after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. Instruments and controls 2-11 ● When a spare tire is mounted or a wheel is replaced the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. CAUTION ● The TPMS is not a substitute for the regular tire pressure check. Be sure to check the tire pressure regularly. ● If the vehicle is being driven at speeds of less than 16 MPH (25 km/h), the TPMS may not operate correctly. ● Be sure to install the specified size of tires to the 4 wheels correctly. Low windshield-washer fluid warning light (if so equipped) This light comes on when the windshield-washer fluid is at a low level. Add windshield-washer fluid as necessary. For additional information, refer to “Windshield-washer fluid” in the “Maintenance and do-it-yourself” section of this manual. 2-12 Instruments and controls Power steering warning light WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering. You will still have control of the vehicle, but the steering will be harder to operate. Have the power steering system checked by a NISSAN dealer. When the ignition switch is placed in the ON position, the power steering warning light illuminates. After starting the engine, the power steering warning light turns off. This indicates the power steering system is operational. If the power steering warning light illuminates while the engine is running, it may indicate the power steering system is not functioning properly and may need servicing. Have the power steering system checked by a NISSAN dealer. When the power steering warning light illuminates with the engine running, there will be no power assist for the steering, but you will still have control of the vehicle. At this time, greater steering effort is required to operate the steering wheel, especially in sharp turns and at low speeds. For additional information, refer to “Power steering” in the “Starting and driving” section of this manual. Seat belt warning light and chime The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition switch is placed in the ON or START position and remains illuminated until the driver’s seat belt is fastened. At the same time, the chime sounds for about 6 seconds unless the driver’s seat belt is securely fastened. The seat belt warning light may also illuminate if the front passenger’s seat belt is not fastened when the front passenger’s seat is occupied . For 7 seconds after the ignition switch is placed in the ON position, the system does not activate the warning light for the front passenger. For additional information, refer to “Seat belts” in the “Safety—Seats, seat belts and supplemental restraint system” section of this manual for precautions on seat belt usage. Supplemental air bag warning light When the ignition switch is placed in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and pretensioner seat belt systems need servicing and your vehicle must be taken to a NISSAN dealer: ● The supplemental air bag warning light remains on after approximately 7 seconds. ● The supplemental air bag warning light flashes intermittently. ● The supplemental air bag warning light does not come on at all. Unless checked and repaired, the supplemental restraint system (air bag system) and/or the pretensioners may not function properly. For additional information, refer to “Supplemental restraint system (SRS)” in the “Safety—Seats, seat belts and supplemental restraint system” section of this manual. WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag systems and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible. INDICATOR LIGHTS Continuously Variable Transmission (CVT) position indicator light When the ignition key is turned to the ON position, this indicator light shows the shift lever position. For additional information, refer to “Driving the vehicle” in the “Starting and driving” section of this manual. Cruise main switch indicator light (if so equipped) The light comes on when the cruise control main switch is pushed. The light goes out when the main switch is pushed again. When the cruise main switch indicator light comes on, the cruise control system is operational. Front passenger air bag status light The front passenger air bag status light will be lit and the passenger front air bag will be off depending on how the front passenger seat is being used. For front passenger air bag status light operation, refer to “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. High beam indicator light (blue) This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated. Malfunction Indicator Light (MIL) If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. may also come on steady if the fuelThe filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap Instruments and controls 2-13 is installed and closed tightly, and that the vehicle has at least 3 gal (11.4 L) of fuel in the fuel tank. light should After a few driving trips, the turn off if no other potential emission control system malfunction exists. If this indicator light comes on steady for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test. For additional information, refer to “Readiness for inspection/maintenance (I/M) test” in the “Technical and consumer information” section of this manual. Operation The MIL will come on in one of two ways: ● MIL on steady — An emission control system malfunction has been detected. Check the fuel-filler cap. If the LOOSE FUEL CAP warning message is displayed in the odometer, and the fuel-filler cap is loose or missing, tighten or install the cap and continue to light should turn drive the vehicle. The off after a few driving trips. If the light does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer. 2-14 Instruments and controls ● MIL blinking — An engine misfire has been detected which may damage the emission control system. To reduce or avoid emission control system damage: – do not drive at speeds above 45 MPH (72 km/h); – avoid hard acceleration or deceleration; – avoid steep uphill grades; – if possible, reduce the amount of cargo being hauled. The MIL may stop blinking and come on steady. Have the vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer. CAUTION Continued vehicle operation without having the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission control system. Overdrive OFF indicator light The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, refer to “Continuously Variable Transmission (CVT)” in the “Starting and driving” section of this manual. Security indicator light This light blinks when the ignition switch is placed in the OFF, LOCK or ACC position. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational. For additional information, refer to “Security systems” in this section. Slip indicator light This indicator will blink when the Vehicle Dynamic Control (VDC) system or the Traction Control System (TCS) is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery. Turn signal/hazard indicator lights The appropriate light flashes when the turn signal switch is activated. Both lights flash when the hazard switch is turned on. SECURITY SYSTEMS Vehicle Dynamic Control (VDC) OFF indicator light This indicator light comes on when the VDC off switch is pushed to OFF. This indicates the VDC system is not operating. Push the VDC off switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. The VDC light also comes on when you place the ignition switch in the ON position. The light will turn off after about 2 seconds if the system is operational. If the light stays on or comes on indicator light while you are along with the driving, have the VDC system checked by a NISSAN dealer. While the VDC system is operating, you might feel slight vibration or hear the system working when starting the vehicle or accelerating, but this is normal. AUDIBLE REMINDERS Brake pad wear warning VEHICLE SECURITY SYSTEM (if so equipped) The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard. The vehicle security system provides visual and audible alarm signals if someone opens the doors or trunk lid when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs. Key reminder chime The system helps detect vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Always secure your vehicle even if parking for a brief period. Never leave your keys in the ignition, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible. A chime sounds if the driver’s door is opened while the key is left in the ignition switch. Remove the key and take it with you when leaving the vehicle. Light reminder chime With the ignition switch placed in the OFF position, a chime sounds when the driver’s door is opened if the headlights or parking lights are on. Turn the headlight control switch off before leaving the vehicle. Parking brake reminder chime Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops. Your NISSAN dealer may also offer such equipment. Check with your insurance company to see if you may be eligible for discounts for various theft protection features. A chime sounds if the parking brake is set and the vehicle is driven. The chime will stop if the parking brake is released or the vehicle speed returns to zero. Instruments and controls 2-15 How to arm the vehicle security system 1. Close all windows. (The system can be armed even if the windows are open.) 2. Remove the key from the ignition switch. 3. Close all doors. Lock all doors. The doors can be locked with the key, power door lock switch or with the key fob. Key fob operation: button on the key fob. ● Push the All doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked. button is pushed with ● When the all doors locked, the hazard lights flash twice and the horn beeps once as a reminder that the doors are already locked. The horn may or may not beep. Refer to “Silencing the horn beep feature” (vehicles without navigation system) in the “Predriving checks and adjustments” section or “Vehicle electronic systems” (vehicles with navigation system) in the “Display screen, heater, air conditioner and audio systems” section. 2-16 Instruments and controls indicator light comes 4. Confirm that the on. The light stays on for about 30 seconds. The vehicle security system is now pre-armed. After about 30 seconds the vehicle security system automatically shifts light begins into the armed phase. The to flash once every 3 seconds. If, during the 30-second pre-arm time period, the door is unlocked by the key or door lock switch or the key fob, or any door is open, or the ignition key is turned to ACC or ON, the system will not arm. ● If the key is turned slowly when locking the door, the system may not arm. Furthermore, if the key is turned beyond the vertical position toward the unlock position to remove the key, the system may be disarmed when the key is removed. If the indicator light fails to glow for a period of time, unlock the door once and lock it again. ● Even when the driver and/or passengers are in the vehicle, the system will arm with all doors closed and locked with the ignition key in the OFF position. Vehicle security system activation The vehicle security system will give the following alarm: ● The headlights blink and the horn sounds intermittently. ● The alarm automatically turns off after a period of time. However, the alarm reactivates if the vehicle is tampered with again. The alarm can be shut off by unlocking the driver’s door button with the key or by pressing the on the key fob. The alarm is activated by: ● opening a door without using the key or key fob (even if the door is unlocked by using the inside lock knob or the power door lock switch). How to stop an activated alarm The alarm stops only by unlocking the driver’s door with the key or pressing the button on the key fob. NISSAN VEHICLE IMMOBILIZER SYSTEM FCC Notice: The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of a registered key. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following procedures: 1. Leave the ignition switch in the ON position for approximately five seconds. 2. Turn the ignition switch to the OFF or LOCK position, and wait approximately 10 seconds. 3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key. If the no start condition re-occurs, NISSAN recommends placing the registered key on a separate key ring to avoid interference from other devices. For USA: NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. LIC0474 Security indicator light This light blinks whenever the ignition switch is placed in the LOCK, OFF or ACC position. This function indicates the NISSAN Vehicle Immobilizer System is operational. If the NISSAN Vehicle Immobilizer System is malfunctioning, the light will remain on while the ignition switch is placed in the ON position. If the light still remains on and/or the engine will not start, see a NISSAN dealer for NISSAN Vehicle Immobilizer System service as soon as possible. Please bring all registered keys that you have when visiting your NISSAN dealer for service. Instruments and controls 2-17 WINDSHIELD WIPER AND WASHER SWITCH 4 to have one sweep operaPush the lever up 䊊 tion (MIST ) of the wiper. 5 to operate the Pull the lever toward you 䊊 washer. The wiper will also operate several times. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm the windshield with the defroster before you wash the windshield. LIC2153 WIC2748 Type A (if so equipped) Type B (if so equipped) SWITCH OPERATION The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: 1 䊊 2 䊊 3 䊊 2-18 Instruments and controls Intermittent (INT) — intermittent operation can be adjusted by turning the knob toward A (Slower) or 䊊 B (Faster). 䊊 Low (LO) — continuous low speed operation High (HI) — continuous high speed operation CAUTION ● Do not operate the washer continuously for more than 30 seconds. ● Do not operate the washer if the reservoir is empty. ● Do not fill the windshield-washer fluid reservoir with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the windshieldwasher fluid reservoir. REAR WINDOW AND OUTSIDE MIRROR (if so equipped) DEFROSTER SWITCH HEADLIGHT AND TURN SIGNAL SWITCH ● Pre-mix windshield-washer fluid concentrates with water to the manufacturer’s recommended levels before pouring the fluid into the windshield-washer fluid reservoir. Do not use the windshield-washer fluid reservoir to mix the windshield-washer fluid concentrate and water. LIC2127 LIC0388 To defrost the rear window glass and outside mirrors: Start the engine and push the rear window defroster switch. The rear window defroster indicator light on the display screen comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes. CAUTION Type A (if so equipped) HEADLIGHT CONTROL SWITCH Lighting 1 䊊 2 䊊 When turning the switch to the position, the front parking, tail, license plate and instrument panel lights come on. When turning the switch to the position, the headlights come on and all the other lights remain on. When cleaning the inner side of the rear window, be careful not to scratch or damage the rear window defroster. Instruments and controls 2-19 CAUTION Even though the battery saver feature automatically turns off the headlights after a period of time, you should turn the headlight switch to the OFF position when the engine is not running to avoid discharging the vehicle battery. DAYTIME RUNNING LIGHT SYSTEM WIC1509 Type B (if so equipped) CAUTION Use the headlights with the engine running to avoid discharging the vehicle battery. LIC2128 Headlight beam select 1 䊊 2 䊊 3 䊊 To select the high beam function, push the lever forward. The high beam lights come on light illuminates. and the Pull the lever back to select the low beam. Pulling and releasing the lever flashes the headlight high beams on and off. Battery saver system If the ignition switch is placed in the OFF position while the headlight switch is in the or position, the headlights will turn off after a period of time. 2-20 Instruments and controls The headlights automatically illuminate at a reduced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position. Turn the headlight switch to or position for full illumination the when driving at night. If the parking brake is applied before the engine is started, the daytime running lights do not illuminate. The daytime running lights illuminate when the parking brake is released. The daytime running lights will remain on until the ignition switch is placed in the OFF position. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. Move the lever up or down until the turn signal begins to flash, but the lever does not latch, and release the lever. The turn signal will automatically flash three times. Choose the appropriate method to signal a lane change based on road and traffic conditions. LIC2147 INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when the headlight control switch is in the or position. A to adjust the brightness of Push the control 䊊 instrument panel lights when driving at night. LIC2473 TURN SIGNAL SWITCH Turn signal Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. Lane change signal Move the lever up or down until the turn signal begins to flash, but the lever does not latch, to signal a lane change. Hold the lever until the lane change is completed. Instruments and controls 2-21 HORN VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH LIC2227 LIC1548 To sound the horn, push near the horn icon on the steering wheel. The vehicle should be driven with the VDC system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off. To turn off the VDC system, push the VDC OFF indicator will come on. switch. The Push the VDC OFF switch again or restart the engine to turn on the system. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tampering with the supplemental front air bag system may result in serious personal injury. 2-22 Instruments and controls REAR SONAR SYSTEM OFF SWITCH (if so equipped) LIC2881 WARNING The rear sonar system is a convenience but it is not a substitute for proper backing. Always turn and check that it is safe to do so before backing up. Always back up slowly. The rear sonar system is active when the ignition switch is placed in the ON position and the shift selector is in R (Reverse). When sensors detect obstacles within 5.9 ft (1.8 m) of the rear bumper, a beeping tone is emitted. POWER OUTLET The rear sonar system can be disabled by pushing the OFF switch. When the system is disabled, the indicator light on the switch will illuminate. The system will automatically reset the next time the ignition switch is placed in the ON position. For additional information, refer to “Rear sonar system (RSS)” in the “Starting and driving” section of this manual. LIC2446 Front Console The power outlets are for powering electrical accessories such as cellular telephones. The outlet is rated at 12 volt, 120 W (10A) maximum. CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for use with a cigarette lighter unit. Do not use any other power outlet for an accessory lighter. See your NISSAN dealer for additional information. LIC2447 Rear Console – (if so equipped) ● Do not use with accessories that exceed a 12 volt, 120 W (10A) power draw. Do not use double adapters or more than one electrical accessory. ● Use power outlets with the engine running to avoid discharging the vehicle battery. ● Avoid using power outlets when the air conditioner, headlights or rear window defroster (if so equipped) is on. Instruments and controls 2-23 STORAGE ● Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF. ● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may open. ● When not in use, be sure to close the cap. Do not allow water or any other liquid to contact the outlet. LIC2472 Door Panel MAP POCKETS LIC2451 STORAGE TRAYS WARNING Do not place sharp objects in the trays to help prevent injury in an accident or sudden stop. 2-24 Instruments and controls LIC2450 UNDER-SEAT STORAGE BINS To open the drawer, lift up slightly and pull to open. To remove the drawer, pull to the point of resistance and lift up and pull. CAUTION To avoid damaging the tray under the seat, cargo in the trays should not exceed 4 lb (1.8 kg). LIC2448 CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident. LIC2160 GLOVE BOX Open the glove box by pulling the handle. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. Instruments and controls 2-25 WINDOWS ● Never allow anyone to ride in the cargo area. It is extremely dangerous to ride in the a cargo area of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a seat belt properly. LIC2088 D-RINGS (if so equipped) The D-rings can be used to secure cargo with ropes or other types of straps. WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. ● Use suitable ropes or straps to secure cargo. 2-26 Instruments and controls For additional information, refer to “Securing the load” in “Technical and consumer information”. POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls and become trapped in a window. Unattended children could become involved in serious accidents. The power windows operate when the ignition switch is placed in the ON position, or for a period of time after the ignition switch is placed in the OFF position. If the driver’s or passenger’s door is opened during this period of time, the power to the windows is canceled. Locking passengers’ windows When the window lock switch is depressed, only the driver’s side window can be opened or closed. Push it again to cancel the window lock function. LIC2373 1. 2. 3. 4. Window lock button Power door lock switch (if so equipped) Front passenger side automatic switch Front driver side automatic switch Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. To open a window, push the switch to the first detent and continue to hold down until the desired window position is reached. To close a window, pull the switch to the first detent and continue to hold up until the desired window position is reached. WIC1129 Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window. To open the window, push the switch to the first detent and continue to hold it down until the desired 1 . To close the window position is reached 䊊 window, pull the switch to the first detent and continue to hold it up until the desired window 2 . position is reached 䊊 Instruments and controls 2-27 Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window occurs. WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window. LIC0410 Automatic operation To fully open a window equipped with automatic operation, press the window switch down to the second detent and release it; it need not be held. The window automatically opens all the way. To stop the window, lift the switch up while the window is opening. Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. 2-28 Instruments and controls If the vehicle’s battery is disconnected, replaced, or jump started, the power window auto-reverse function may not operate properly. If this occurs, please contact a NISSAN dealer to re-initialize the power window auto-reverse system. If the control unit detects something caught in a window equipped with automatic operation as it is closing, the window will be immediately lowered. When power window switch does not operate If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Place the ignition switch in the ON position. 2. Open the window more than halfway by operating the power window switch. 3. Pull up and hold the window switch and hold it to close the window, and then hold the switch for more than 3 seconds after the window is closed completely. 4. Release the power window switch. Operate the window by automatic function to confirm the initialization is complete. 5. Perform steps 2 through 4 above for other windows. If the power window automatic function does not operate properly after performing the above procedure, see a NISSAN dealer for assistance. INTERIOR LIGHT MAP LIGHTS ● The driver’s door is opened and then closed while the key is removed from the ignition switch. ● The key is removed from the ignition switch while all doors are closed. The light will turn off while the timer is activated when: ● The driver’s door is locked by the key, or the power door lock switch. ● The ignition switch is placed in the ON position. LIC2597 The map light has a three-position switch and operates regardless of ignition switch position. 3 , the When the switch is in the ON position 䊊 map light illuminates, regardless of door position. The light will go off after a period of time unless the ignition switch is placed in the ACC or ON position. 2 , the When the switch is in the DOOR position 䊊 map light will stay on for a period of time when: 1 , the When the switch is in the OFF position 䊊 map light does not illuminate, regardless of door position. The light will turn off automatically after a period of time while doors are open to prevent the battery from becoming discharged. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. LIC2778 To turn the map lights on, push the switch to the 1 position. To turn them off, push the switch to 䊊 2 position. the 䊊 CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. ● The doors are unlocked by the key or the power door lock switch while all doors are closed and the ignition switch is placed in the OFF position. Instruments and controls 2-29 CARGO LIGHT CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. LIC2675 The cargo light has a two-position switch and operates regardless of ignition switch position. When the switch is in the ON position, the cargo light illuminates, regardless of door position. The light will go off after a period of time unless the ignition switch is placed in the ACC or ON position. When the switch is in the OFF position, the cargo light will not illuminate, regardless of door position. 2-30 Instruments and controls 3 Pre-driving checks and adjustments Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 NISSAN vehicle immobilizer system keys . . . . . . . . . . 3-2 Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-5 Locking with power door lock switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Operating the sliding doors . . . . . . . . . . . . . . . . . . . . . . 3-6 Back doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Automatic door locks (if so equipped). . . . . . . . . . . . . 3-9 Remote keyless entry system (if so equipped). . . . . . . . . 3-9 How to use remote keyless entry system . . . . . . . . . 3-10 Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 Opener operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 Card holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 Rearview mirror (if so equipped). . . . . . . . . . . . . . . . . 3-17 Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 KEYS A key number is only necessary when you have lost all the keys. If you still have a key, your NISSAN dealer can duplicate it. NISSAN VEHICLE IMMOBILIZER SYSTEM KEYS You can only drive your vehicle using the master keys which are registered to the NISSAN Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key head. The master key can be used for all the locks. LPD2130 LPD2045 Type A (if so equipped) 1. 2. 3. Master key Transponder chip Key number plate A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate. A key number is only necessary when you have lost all your keys. If you still have a key, your NISSAN dealer can duplicate it. 3-2 Pre-driving checks and adjustments Type B (if so equipped) 1. 2. Integrated key fob Key number plate CAUTION Do not leave the ignition key inside the vehicle when you leave the vehicle. A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate. Never leave these keys in the vehicle. Additional or replacement keys: If you still have a key, the key number is not necessary when you need extra NISSAN Vehicle Immobilizer System keys. Your dealer can duplicate your existing key. As many as five NISSAN Vehicle Immobilizer System keys can be used with one vehicle. You should bring all NISSAN Vehicle Immobilizer System keys that you have to your NISSAN dealer for registration. This is because the registration process will erase the memory of all key codes previously registered into the NISSAN Vehicle Immobilizer System. After the registration process, these components will only recognize keys coded into the NISSAN Vehicle Immobilizer System during registration. DOORS Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. When the doors are locked using one of the following methods, the doors cannot be opened using the inside or outside door handles. The doors must be unlocked to open the doors. CAUTION Do not allow the immobilizer system key, which contains an electrical transponder, to come into contact with water or salt water. This could affect system function. WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders. ● Before opening any door, always look for and avoid oncoming traffic. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents. LPD2131 Driver’s side and passenger side (if so equipped) LOCKING WITH KEY Manual (if so equipped) To lock a door, turn the key toward the front of the 1 . To unlock, turn the key toward the rear vehicle 䊊 2 . 䊊 Pre-driving checks and adjustments 3-3 LPD2132 Sliding doors To lock a door, turn the key toward the front of the 1 . To unlock, turn the key toward the rear vehicle 䊊 2 . 䊊 LPD2133 Back door 1 of To lock a door, turn the key toward the right 䊊 the vehicle. To unlock, turn the key toward the left 2 of the vehicle. 䊊 LPD2134 Driver’s side and passenger side (if so equipped) Power (if so equipped) The power door lock system allows you to lock or unlock all doors at the same time. 1 of the vehicle Turning the key toward the front 䊊 locks all the doors. 2 of the Turning the key one time toward the rear 䊊 vehicle unlocks that door. From that position, 3 (where the key can returning the key to neutral 䊊 only be removed and inserted) and turning it toward the rear again within five seconds unlocks 4 . all doors 䊊 3-4 Pre-driving checks and adjustments LPD2092 Inside lock – front driver and passenger LPD2135 LPD2001 LOCKING WITH INSIDE LOCK KNOB Inside lock – sliding doors To lock the door without the key, move the inside 2 , then close the lock knob to the lock position 䊊 door. Inside lock – back door To lock the door without the key, move the inside 1 , then close the lock knob to the lock position 䊊 door. To lock the door without the key, move the inside 1 , then close the lock knob to the lock position 䊊 door. To unlock the door without the key, move the 1 . inside lock knob to the unlock position 䊊 To unlock the door without the key, move the 2 . inside lock knob to the unlock position 䊊 To unlock the door without the key, move the 2 . inside lock knob to the unlock position 䊊 To open the door from the inside, pull the inside door handle toward you. Pre-driving checks and adjustments 3-5 Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the key in the ignition switch and any door opens, all doors will lock and then unlock automatically. This helps to prevent the keys from being accidently locked inside the vehicle. WPD0381 LOCKING WITH POWER DOOR LOCK SWITCH (if so equipped) To lock all the doors without a key, push the door lock switch (driver’s or front passenger’s side) to 1 . When locking the door this the lock position 䊊 way, be certain not to leave the key inside the vehicle. To unlock all the doors without a key, push the door lock switch (driver’s or front passenger’s 2 . side) to the unlock position 䊊 3-6 Pre-driving checks and adjustments LPD2136 OPERATING THE SLIDING DOORS WARNING ● Always use the door handle to open or close the sliding door. Do not attempt to open or close the door by merely placing your hand on the door edge or door slide roller as this may cause injury. ● When opening the door on a slope, ensure that it is fully open and can be held in place by the detent. Failing to ensure the door remains open could result in serious injury. The sliding door can be opened from the inside or the outside. To open the sliding door from the inside, pull the 1 toward the rear of the vehicle and slide handle 䊊 the door until the door clicks into the detent. To close the sliding door from the inside pull the 1 toward the rear of the vehicle. The handle 䊊 door will release from the open position and slide closed. LPD2137 LPD2138 To open a sliding door from the outside, pull the outside handle and slide the door toward the rear of the vehicle until the door clicks into the detent. BACK DOORS To close the sliding door from the outside, pull the outside handle again. The door will release from the open position and slide closed. ● Do not operate the 180° release lever until the door has been fully opened. Doing so can result in damage to the vehicle and/or malfunction of the mechanism. CAUTION ● Always look before fully opening the back door(s), to avoid an accident with oncoming traffic or pedestrians. ● When closing the back doors, be sure to close the left-side door before closing the right-side door. Pre-driving checks and adjustments 3-7 Open the back doors by performing the following: 1. From the outside of the vehicle, pull the door 1 on the right side door and open handle 䊊 door until it stops. LPD2139 2 , located on the side of the 2. Pull the lever 䊊 left back door, toward the rear of the vehicle and pull the door to open until the door stops. LPD2140 The back doors open approximately 180° to allow access to the rear of the vehicle. 3. To open either door to the wide open posi3 pull the release latch 䊊 A , located on tion 䊊 the inside of each back door, toward the front of the vehicle to release the check link arm. 4. Open the door slowly until the door stops. The back doors are not designed to be latched in their fully open positions. Park the vehicle in a safe and level place. Make sure that the area is clear of obstacles and there is enough clearance around the back doors. 3-8 Pre-driving checks and adjustments REMOTE KEYLESS ENTRY SYSTEM (if so equipped) AUTOMATIC DOOR LOCKS (if so equipped) ● All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h). ● All doors unlock automatically when the ignition switch is placed in the OFF position or when the key is removed from the ignition switch. The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position. 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to position (UNLOCK) for more than the five seconds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition switch must be placed in the OFF and ON position again between each setting change. When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side). NOTE: The sliding and back doors do not lock automatically. Use another locking method to lock the sliding and back doors. WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use. ● The remote keyless entry key fob transmits radio waves when the buttons are pressed. The FAA advises radio waves may affect aircraft navigation and communication systems. Do not operate the remote keyless entry key fob while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight. It is possible to lock/unlock all doors, turn the interior lights on, and activate the panic alarm by using the key fob from outside the vehicle. Be sure to remove the key from the vehicle before locking the doors. The key fob can operate at a distance of approximately 33 ft (10 m) from the vehicle. The effective distance depends on the conditions around the vehicle. Pre-driving checks and adjustments 3-9 As many as four key fobs can be used with one vehicle. For information concerning the purchase and use of additional key fobs, contact a NISSAN dealer. The key fob will not function when: ● the battery is discharged ● the distance between the vehicle and the key fob is over 33 ft (10 m) The panic alarm will not activate when the key is in the ignition switch. CAUTION Listed below are conditions or occurrences which will damage the key fob: ● Do not allow the key fob, which contains electrical components, to come into contact with water or salt water. This could affect the system function. ● Do not place the key fob for an extended period in an area where temperatures exceed 140°F (60°C). ● Do not attach the key fob with a key holder that contains a magnet. ● Do not place the key fob near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers. If a key fob is lost or stolen, NISSAN recommends erasing the ID code of that key fob. This will prevent the key fob from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please contact a NISSAN dealer. LPD2039 HOW TO USE REMOTE KEYLESS ENTRY SYSTEM Locking doors 1. Close all windows. ● Do not drop the key fob. 2. Remove the key from the ignition switch. ● Do not strike the key fob sharply against another object. 3. Close all doors. ● Do not change or modify the key fob. ● Wetting may damage the key fob. If the key fob gets wet, immediately wipe until it is completely dry. 3-10 Pre-driving checks and adjustments button on the key fob. All 4. Press the the doors lock. The hazard warning lights flash twice and the horn beeps once to indicate all doors are locked. ● When the button is pressed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a reminder that the doors are already locked. button on the key fob again Press the within five seconds. ● All doors unlock. ● The hazard warning lights flash once if all doors are completely closed. The interior lights can be turned off without waiting a period of time by inserting the key into the ignition switch and placing the ignition switch in the ON or START position, locking the doors with the key fob, power door lock switch or pushing the interior light switch to the off position. ● If a door is open and you press button, the doors will lock the but the horn will not beep and the hazard lights will not flash. The horn may or may not beep. For additional information, refer to “Silencing the horn beep feature” in this section. LPD2040 Unlocking doors Press the button on the key fob once. ● Only the driver’s door unlocks. ● The hazard warning lights flash once if all doors are completely closed with the ignition switch in any position except the ON position. Auto relock When the button on the key fob is pressed, all doors will lock automatically within one minute unless one of the following operations is performed: ● Any door is opened. ● A key is inserted into the ignition switch and the switch is cycled from OFF to ON. ● Press key fob button. ● The interior light turns on and the light timer activates for 30 seconds when the interior light switch is in the DOOR position with the ignition switch in any position except the ON position. Pre-driving checks and adjustments 3-11 Using the interior light Press the button on the key fob once to turn on the interior lights. For additional information, refer to “Interior light” in the “Instruments and controls” section in this manual. LPD2041 LPD2044 Using the panic alarm Silencing the horn beep feature If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention button on the by pressing and holding the key fob for longer than 0.5 seconds. The panic alarm and headlights will stay on for a period of time. If desired, the horn beep feature can be deactivated using the key fob. The panic alarm stops when: ● it has run for a period of time, or ● any button is pressed on the key fob. 3-12 Pre-driving checks and adjustments To deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated. To activate: Press and hold the and buttons for at least 2 seconds once more. HOOD The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated. Deactivating the horn beep feature does not silence the horn if the alarm is triggered. LPD2247 E located 1. Pull the hood lock release handle 䊊 below the instrument panel until the hood springs up slightly. A in between the hood and 2. Locate the lever 䊊 grille and push the lever sideways with your fingertips. B. 3. Raise the hood 䊊 C and insert it into 4. Remove the support rod 䊊 D. the slot 䊊 Hold the coated parts of the support rod when removing or resetting the support rod. Avoid direct contact with the metal parts, as they may be hot immediately after the engine has been stopped. When closing the hood, return the support rod to its original position, lower the hood to approximately 12 in (30 cm) above the latch and release it. This allows proper engagement of the hood latch. Pre-driving checks and adjustments 3-13 FUEL-FILLER DOOR FUEL-FILLER CAP WARNING ● Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. WARNING ● Gasoline is extremely flammable and highly explosive under certain conditions. You could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling. ● If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood. LPD2022 OPENER OPERATION The fuel-filler door release is located below the instrument panel. To open the fuel-filler door, pull the release. To lock, close the fuel-filler door securely. ● Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire. ● Use only an original equipment type fuel-filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control system. An incorrect cap can result in a serious malfunction and possible injury. It could also cause Malfunction Indicator Light the (MIL) to come on. ● Never pour fuel into the throttle body to attempt to start your vehicle. 3-14 Pre-driving checks and adjustments ● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: – Always place the container on the ground when filling. – Do not use electronic devices when filling. – Keep the pump nozzle in contact with the container while you are filling it. – Use only approved portable fuel containers for flammable liquid. CAUTION ● Do not use E-15 or E-85 fuel in your vehicle. For additional information, refer to the “Fuel Recommendation” in the “Technical and consumer information” section of this manual. ● Failure to tighten the fuel-filler cap Malfuncproperly may cause the tion Indicator Light (MIL) to illuminate. light illuminates because If the the fuel-filler cap is loose or missing, tighten or install the cap and continue light to drive the vehicle. The should turn off after a few driving trips. light does not turn off after a If the few driving trips, have the vehicle inspected by a NISSAN dealer. ● The LOOSE FUEL CAP warning message will be displayed if the fuel-filler cap is not properly tightened. It may take a few driving trips for the message to be displayed. Failure to tighten the fuel-filler cap properly after the LOOSE FUEL CAP warning message is disMalfuncplayed may cause the tion Indicator Light (MIL) to illuminate. ● For additional information, refer to the “Malfunction Indicator Light (MIL)” in the “Instruments and Controls” section in this manual. ● If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage. LPD2143 To remove the fuel-filler cap: 1 1. Turn the fuel-filler cap counterclockwise 䊊 to remove. A 2. Loop the tether strap around the hook 䊊 while refueling. To install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuelfiller tube. 2 until a 2. Turn the fuel-filler cap clockwise 䊊 single click is heard. Pre-driving checks and adjustments 3-15 SUN VISORS 1 䊊 2 䊊 3 䊊 To block glare from the front, swing down the main sun visor. To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. To extend the sun visor, slide in or out as needed (if so equipped). CAUTION ● Do not store the sun visor before returning the extension to its original position. ● Do not pull the extension sun visor forcedly downward. LIC2468 Loose Fuel Cap warning message The LOOSE FUEL CAP warning message displays in the odometer when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. To turn off the warning message, do the following: 1. Remove and install the fuel-filler cap as previously described as soon as possible. 2. Tighten the fuel-filler cap until it clicks. 3. Press the loose fuel cap warning reset butA in the meter for about 1 second to ton 䊊 turn off the LOOSE FUEL CAP warning message after tightening the fuel-filler cap. 3-16 Pre-driving checks and adjustments WPD0344 MIRRORS OUTSIDE MIRRORS WARNING ● Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. ● Do not adjust the mirrors while driving. You could lose control of your vehicle and cause an accident. LPD2033 CARD HOLDER To access the card holder, pull the sun visor A . Do not down and slide card in the card holder 䊊 view information while operating the vehicle. WPD0126 REARVIEW MIRROR (if so equipped) 1 to reduce glare from Use the night position 䊊 the headlights of vehicles behind you at night. 2 when driving in daylight Use the day position 䊊 hours. WARNING Use the night position only when necessary, because it reduces rear view clarity. Pre-driving checks and adjustments 3-17 LPD2144 LPD0237 LPD2145 Manual control type (if so equipped) Electric control type (if so equipped) Foldable outside mirrors The outside mirror can be moved in any direction for a better rear view. The outside mirror remote control will operate only when the ignition switch is placed in the ACC or ON position. Pull the outside mirror toward the door to fold it. 1 to select the right or left Move the small switch 䊊 2 to adjust each mirror. Move the large switch 䊊 mirror to the desired position. Some outside mirrors can be heated to defrost, defog, or de-ice for improved visibility. For additional information, refer to “Rear window and outside mirror (if so equipped) defroster switch” in the “Instruments and controls” section of this manual. 3-18 Pre-driving checks and adjustments Heated mirrors (if so equipped) MEMO Pre-driving checks and adjustments 3-19 4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen with Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . 4-2 How to use the touch-screen . . . . . . . . . . . . . . . . . . . . 4-3 How to use the BACK button . . . . . . . . . . . . . . . . . . . . 4-5 How to use the APPS button . . . . . . . . . . . . . . . . . . . . 4-5 button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 How to use the CAMERA button . . . . . . . . . . . . . . . . . 4-7 RearView Monitor (if so equipped). . . . . . . . . . . . . . . . . . . 4-8 How to read the displayed lines . . . . . . . . . . . . . . . . . . 4-9 Difference between predicted and actual distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Adjusting the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Operating tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Heater and air conditioner (manual). . . . . . . . . . . . . . . . . 4-13 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Heater operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Air conditioner operation . . . . . . . . . . . . . . . . . . . . . . . 4-16 Air flow charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17 Servicing air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 FM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 AM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Satellite radio reception (if so equipped) . . . . . . . . . 4-22 Audio operation precautions . . . . . . . . . . . . . . . . . . . . 4-22 FM/AM radio with compact disc (CD) player (Type A) (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 4-29 FM/AM radio with compact disc (CD) player (Type B) (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 4-33 FM/AM/SAT radio with compact disc (CD) player (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 4-37 USB (Universal Serial Bus) Connection Port (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43 iPod®* player operation (if so equipped) . . . . . . . . . 4-45 Bluetooth® streaming audio with Navigation System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48 CD care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50 Steering wheel switch for audio control (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51 NissanConnectSM Mobile Apps (if so equipped) . . . . . 4-51 Registering with NissanConnectSM Mobile Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51 Connect Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52 Application Download. . . . . . . . . . . . . . . . . . . . . . . . . . 4-52 Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52 Bluetooth® Hands-Free Phone System without Navigation System (if so equipped) . . . . . . . . . . . . . . . . . 4-53 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . 4-55 Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55 Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-58 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-58 List of voice commands . . . . . . . . . . . . . . . . . . . . . . . . 4-60 Voice Adaptation (VA) mode . . . . . . . . . . . . . . . . . . . . 4-64 Manual control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-66 Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 4-67 Bluetooth® Hands-Free Phone System with Navigation System (if so equipped) . . . . . . . . . . . . . . . . . 4-68 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . 4-69 Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-70 Connecting Procedure . . . . . . . . . . . . . . . . . . . . . . . . . 4-70 Vehicle phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71 Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71 Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71 During a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71 Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-71 Text messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-72 Bluetooth® settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-73 Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-74 NISSAN Voice Recognition System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-75 Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-75 System features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-76 Bluetooth® Hands-Free Phone System voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-77 Navigation System voice commands . . . . . . . . . . . . . 4-78 Audio system voice commands. . . . . . . . . . . . . . . . . . 4-78 Information voice commands. . . . . . . . . . . . . . . . . . . . 4-78 My Apps Voice Commands . . . . . . . . . . . . . . . . . . . . . 4-78 Help voice commands . . . . . . . . . . . . . . . . . . . . . . . . . 4-79 Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 4-79 CONTROL PANEL BUTTONS — COLOR SCREEN WITH NAVIGATION SYSTEM (if so equipped) WARNING ● Positioning of the heating or air conditioning controls and display controls should not be done while driving in order that full attention may be given to the driving operation. ● Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. ● In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell coming from it, stop using the system immediately and contact your nearest NISSAN dealer. Ignoring such conditions may lead to accidents, fire or electrical shock. LHA2898 1. MAP button* 2. Display screen 3. button** 4. button 5. (brightness control) button 4-2 Monitor, climate, audio, phone and voice recognition systems 6. BACK button 7. ON•OFF button / VOL (volume) control knob 8. CAMERA button 9. NAV button* * For additional information regarding the Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. ** For additional information regarding the Bluetooth® Hands-Free Phone System control button, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section. When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start. ● To clean the display, never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deteriorate the panel. ● Do not splash any liquid such as water or car fragrance on the display. Contact with liquid will cause the system to malfunction. To help ensure safe driving, some functions cannot be operated while driving. The on-screen functions that are not available while driving will be “grayed out” or muted. LHA2916 Park the vehicle in a safe location and then operate the navigation system. Reference symbols: “Example” — Words marked in quotes refer to a key shown only on the display. These keys can be selected by touching the screen. HOW TO USE THE TOUCHSCREEN CAUTION ● The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. WARNING ● ALWAYS give your full attention to driving. ● Avoid using vehicle features that could distract you. If distracted, you could lose control of your vehicle and cause an accident. Monitor, climate, audio, phone and voice recognition systems 4-3 Touch-screen operation Menu Item Selecting the item Adjusting the item Inputting characters 123/ABC Space Delete OK Result Touch an item to select . To select the “Audio” key, touch the “Audio” key on the screen. Touch the “BACK” key to return to the previous screen. Touch the “+” key or the “⫺” key to adjust the settings of an item. Touch the up arrow to scroll up the page one item at a time, or touch the double up arrow to scroll up an entire page. Touch the down arrow to scroll down the page one item at a time, or touch the double down arrow to scroll down an entire page. Touch the letter or number key. There are some options available when inputting characters. Changes the available character set to numbers. Inserts a space. Deletes the last inputted character with one touch. Touch and hold the “Delete” key to delete all of the characters. Completes the character input. Touch-screen maintenance If you clean the display screen, use a dry, soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or detergent. Dampen the cloth first and then wipe the screen. 4-4 Monitor, climate, audio, phone and voice recognition systems HOW TO USE THE BACK BUTTON Press the BACK button to return to the previous screen. LHA2773 HOW TO USE THE APPS BUTTON For additional information about the “SiriusXM Travel Link”, and “Traffic” features, refer to the separate Navigation System Owner’s Manual. For additional information about the “My Apps” key, refer to “NissanConnect™ with Mobile Apps Smartphone Integration” in this section. LHA2916 To select and/or adjust several functions, features and modes that are available for your vehicle: 1. Press the [ ] button. 2. Touch the “Settings” key. 3. Touch the desired item. For additional information about the “Voice Commands” key, refer to “NISSAN Voice Recognition System” in this section. Monitor, climate, audio, phone and voice recognition systems 4-5 Menu item Audio Navigation Phone & Bluetooth System Display Brightness Display Mode Scroll Direction Clock Time Format Date Format Clock Mode Set Clock Manually Daylight Savings Time Time Zone Language Camera Settings Display Mode Brightness Contrast Color Result For additional information, refer to “Audio system” in this section. For additional information, refer to the separate Navigation System Owner’s Manual. For additional information, refer to “Bluetooth® Hands-Free Phone System with Navigation System”. Touch this key to select and/or adjust various functions of this system. A screen with additional options will appear. Touch this key to adjust the appearance of the display. Adjusts the brightness of the display. Adjusts to fit the level of lighting in the vehicle. Touch key to cycle through options. “Day” and “Night” modes are suited for the respective times of day while “Auto” controls the display automatically. Adjusts the direction of the menu scroll. Choose to either move up or down. Touch this key to adjust the time. The clock can be set to 12 hours or 24 hours. Select from five possible formats of displaying the day, month, and year. Adjust the mode for the clock. “Auto” uses the system’s GPS to automatically maintain the time. “Manual” allows you to set the clock using the “Set Clock Manually” key. Adjust the clock manually, Touch the “+” or “-” keys to adjust the hours, minutes, day, month and year up or down. “Clock Mode” must be set to manual for this option to be available. Adjusts the daylight savings time on or off. Choose the applicable time zone from the list. Touch this key to change the language on the display. Touch this key to change the camera settings. Touch this key to select the touch-screen display mode (day, night, or automatic). Adjust touch-screen brightness. Adjust touch-screen contrast. Adjust touch-screen color. 4-6 Monitor, climate, audio, phone and voice recognition systems Menu item Temperature Unit Touchscreen click System Beeps Return to Factory Settings/Clear Memory Software Licenses Traffic SXM Result Touch this key to change the temperature unit being displayed (Fahrenheit or Celsius). Toggles the touchscreen click feature on or off. When activated a click sound will be heard every time a key on the screen is touched. Toggle the system beep tones feature on or off. When activated, a beep sound will be heard when a pop-up message appears on the screen or a button on the unit (such as the button) is pressed and held for two seconds. Touch this key to return all settings to default and to clear the memory. Touch this key to display software licensing information. Touch this key to display traffic settings. For additional information, refer to the separate Navigation System Owner’s Manual. Touch this key to start SiriusXM® radio. For SXM setup, refer to “Audio system” in this section. BUTTON To change the display brightness, press the button. Pressing the button again will change the display to the day or the night display. If no operation is performed within 5 seconds, the display will return to the previous display. button for more than Press and hold the 2 seconds to turn the display off. Press the button again to turn the display on. HOW TO USE THE CAMERA BUTTON For additional information regarding the CAMERA button, refer to “Rearview Monitor” in this section. Monitor, climate, audio, phone and voice recognition systems 4-7 REARVIEW MONITOR (if so equipped) When the shift lever is shifted into the R (Reverse) position, the monitor display shows the view to the rear of the vehicle. WARNING ● Failure to follow the warnings and instructions for proper use of the RearView Monitor could result in serious injury or death. ● The RearView Monitor is a convenience but it is not a substitute for proper backing. Always turn and look out the windows, and check mirrors to be sure that it is safe to move before operating the vehicle. Always back up slowly. ● The system is designed as an aid to the driver in showing large stationary objects directly behind the vehicle, to help avoid damaging the vehicle. ● The system cannot completely eliminate blind spots and may not show every object. ● Underneath the bumper and the corner areas of the bumper cannot be viewed on the RearView Monitor because of its monitoring range limitation. The system will not show small objects below the bumper, and may not show objects close to the bumper or on the ground. ● Objects viewed in the RearView Monitor differ from actual distance because a wide-angle lens is used. ● Objects in a RearView Monitor will appear visually opposite than when viewed in the rear view and outside mirrors. ● Make sure that the back doors are securely closed when backing up. ● Do no put anything on the rearview camera. The rearview camera is installed on the back door. ● When washing the vehicle with high pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. 4-8 Monitor, climate, audio, phone and voice recognition systems ● Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. CAUTION There is a plastic cover over the camera. Do not scratch the cover when cleaning dirt or snow from the cover. DIFFERENCE BETWEEN PREDICTED AND ACTUAL DISTANCES The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects. LHA0437 HOW TO READ THE DISPLAYED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the A are displayed on the monitor. vehicle body line 䊊 Distance guide lines Indicate distances from the vehicle body. 1 : approx. 1.5 ft (0.5 m) ● Red line 䊊 2 : approx. 3 ft (1 m) ● Yellow line 䊊 3 : approx. 7 ft (2 m) ● Green line 䊊 LHA2278 The on-screen guidelines can be set to on or off. With the shift lever in the R (Reverse) position Press the CAMERA button to toggle the feature on and off. With the shift lever in any position other than the R (Reverse) position 1. Press the CAMERA button. 2. Touch the “Show Guidelines” key to toggle the feature on or off. 4 : approx. 10 ft (3 m) ● Green line 䊊 Monitor, climate, audio, phone and voice recognition systems 4-9 B . Note that any object on the hill is the place 䊊 the hill is further than it appears on the monitor. LHA2590 LHA2591 Backing up on a steep uphill Backing up on a steep downhill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1.0 m) to the A , but the actual 3 ft (1.0 m) distance on place 䊊 When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the A , but the actual 3 ft (1.0 m) distance on place 䊊 4-10 Monitor, climate, audio, phone and voice recognition systems B . Note that any object on the hill is the place 䊊 the hill is closer than it appears on the monitor. A if the object projects over the the position 䊊 actual backing up course. ADJUSTING THE SCREEN 1. Firmly apply the brake and place the shift lever in R (reverse) 2. Press the button on the control panel. 3. The screen will display the Night settings. 4. Turn the TUNE/SCROLL knob to adjust the setting up or down. 5. Press the Auto settings. button again to access the 6. Turn the TUNE/SCROLL knob to adjust the setting up or down. ● Do not adjust the display settings of the RearView Monitor while the vehicle is moving. LHA2592 Backing up behind a projecting object C is shown farther than the position The position 䊊 B in the display. However, the position 䊊 C is 䊊 A. actually at the same distance as the position 䊊 The vehicle may hit the object when backing up to Monitor, climate, audio, phone and voice recognition systems 4-11 VENTS OPERATING TIPS CAUTION ● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth dampened with a diluted mild cleaning agent and then wipe with a dry cloth. ● Do not damage the camera as the monitor screen may be adversely affected. ● When the shift lever is shifted to R (Reverse), the monitor screen automatically changes to the RearView Monitor mode. However, the radio can be heard. ● It may take some time until the RearView Monitor is displayed after the shift lever has been shifted to R (Reverse). Objects may be distorted momentarily until the RearView Monitor screen is displayed completely. When the shift lever is returned to a position other than R (Reverse), it may take some time until the screen changes. Objects on the screen may be distorted until they are completely displayed. ● When strong light directly enters the camera, objects may not be displayed clearly. ● Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction. ● The screen may flicker under fluorescent light. This is not a malfunction. ● The colors of objects on the RearView Monitor may differ somewhat from those of the actual object. ● When the contrast of objects is low at night, pressing the SETTING button or MENU button may not change the brightness. ● Objects on the monitor may not be clear in a dark place or at night. ● If dirt, rain or snow attaches to the camera, the RearView Monitor may not display objects. Clean the camera. ● Do not use body wax on the camera window. If body wax does get on the camera window, wipe off the wax with a clean cloth dampened with mild detergent diluted with water. ● When the temperature is extremely high or low, the screen may not clearly display objects. This is not a malfunction. 4-12 Monitor, climate, audio, phone and voice recognition systems SAA3126 Side vents Adjust the air flow direction of the vents by opening, closing or rotating. HEATER AND AIR CONDITIONER (manual) WARNING ● The air conditioner cooling function operates only when the engine is running. LHA2594 Center Adjust the air flow direction of the vents by mov1 . ing the slide 䊊 ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals. NOTE: ● Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vents. ● When parking, set the heater and air conditioner controls to turn off air recirculation to allow fresh air into the passenger compartment. This should help reduce odors inside the vehicle. ● Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up. Monitor, climate, audio, phone and voice recognition systems 4-13 — Air flows mainly from defroster outlets. Temperature control dial The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right. Fresh air Move the air intake lever to the position. The air flow is drawn from outside the vehicle. Air recirculation LHA2587 CONTROLS 1. Air flow control dial 2. Air intake lever (Fresh air/Air recirculation) 3. Temperature control dial 4. Air conditioner button 5. Fan control dial 6. Rear window defroster switch (if so equipped) 7. Outside mirror defroster switch (if so equipped) Fan control dial The fan control dial turns the fan on and off, and controls fan speed. Move the air intake lever to the recirculate air inside the vehicle. selection: Use the position to ● when driving on a dusty road Air flow control dial ● to prevent traffic fumes from entering passenger compartment The air flow control dial allows you to select the air flow outlets. ● for maximum cooling when using the air conditioner — Air flows from center and side vents. — Air flows from center and side vents and foot outlets. — Air flows mainly from foot outlets. — Air flows from defroster outlets and foot outlets. 4-14 Monitor, climate, audio, phone and voice recognition systems Air conditioner button Start the engine, turn the fan control dial to the desired position and press the button to turn on the air conditioner. To turn off the air button again. conditioner, press the The air conditioner cooling function operates only when the engine is running. 3. Turn the fan control dial to the desired position. 3. Turn the fan control dial to the desired position. Rear window defroster switch (if so equipped) 4. Turn the temperature control dial to the desired position between the middle and the hot position. 4. Turn the temperature control dial to the desired position between the middle and the hot position. For additional information about the rear window defroster switch (if so equipped), refer to “Rear window defroster switch” in the “Instruments and controls” section of this manual. Ventilation This mode directs outside air to the side and center vents. Outside mirror defroster switch (if so equipped) 1. Move the air intake lever to the tion. For additional information about the outside mirror defroster switch (if so equipped), refer to “Rear window and outside mirror (if so equipped) defroster switch” in the “Instruments and controls” section of this manual. 2. Turn the air flow control dial to the position. posi- 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. HEATER OPERATION Heating Defrosting or defogging This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets. This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Move the air intake lever to the tion for normal heating. 2. Turn the air flow control dial to the position. posi- 1. Move the air intake lever to the tion. 2. Turn the air flow control dial to the position. ● To quickly remove ice or fog from the windows, turn the fan control dial to the maximum position and the temperature control dial to the full hot position. posi- or position is selected, When the the air conditioner automatically turns on (however, the indicator light will not illuminate). In this position, the air conditioner cannot be turned off. When the air flow control is turned to any position or , the air conditioner other than light will illuminate (the air conditioner will continue operating). and can be turned off using the air conditioner button. This dehumidifies the air, which helps defog the windshield. Bi-level heating This mode directs cooler air from the side and center vents and warmer air from the floor outlets. When the temperature control dial is moved to the full hot or full cool position, the air between the vents and the floor outlets is the same temperature. 1. Move the air intake lever to position. Monitor, climate, audio, phone and voice recognition systems 4-15 2. Turn the air flow control dial to the position. air conditioner button. This dehumidifies the air, which helps defog the windshield. 5. Turn the temperature control dial to the desired position. 3. Turn the fan control dial to the desired position. Operating tips ● For quick cooling when the outside temperature is high, move the air intake lever to position. Be sure to return to the position for normal cooling. the 4. Turn the temperature control dial to the desired position. Heating and defogging Dehumidified heating AIR CONDITIONER OPERATION This mode heats the interior and defogs the windshield. 1. Move the air intake lever to the tion. Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. posi- 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position between the middle and the hot position. or position is selected, When the the air conditioner automatically turns on (however, the indicator light will not illuminate). In this position, the air conditioner cannot be turned off. When the air flow control is turned to any position or , the air conditioner other than light will illuminate (the air conditioner will continue operating) and can be turned off using the This mode is used to heat and dehumidify the air. Start the engine, turn the fan control dial to the button to desired position, and press the activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function operates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Move the air intake lever to the tion. posi- 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Press the comes on. button. The indicator light 4-16 Monitor, climate, audio, phone and voice recognition systems 1. Move the air intake lever to the tion. posi- 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Press the comes on. button. The indicator light 5. Turn the temperature control dial to the desired position. Dehumidified defogging This mode is used to defog the windows and dehumidify the air. 1. Move the air intake lever to the tion. posi- 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. When the or position is selected, the air conditioner automatically turns on (however, the indicator light will not illuminate). In this position, the air conditioner cannot be turned off. When the air flow control is turned to any position other or , the air conditioner light than will illuminate (the air conditioner will continue operating). and can be turned off using the air conditioner button. This dehumidifies the air, which helps defog the windshield. 4. Turn the temperature control dial to the desired position. ● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air intake lever position for should always be in the heating and defrosting. ● If the high temperature warning illuminates in red indicating light engine coolant temperature is over the normal range, turn the air conditioner off. For additional information, refer to “If your vehicle overheats” in the “In case of emergency” section of this manual. Operating tips ● Keep the windows closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment before closing the windows. This allows the air conditioner to cool the interior more quickly. Monitor, climate, audio, phone and voice recognition systems 4-17 LHA3063 4-18 Monitor, climate, audio, phone and voice recognition systems LHA3064 LHA3065 LHA3066 Monitor, climate, audio, phone and voice recognition systems 4-19 LHA3067 4-20 Monitor, climate, audio, phone and voice recognition systems SERVICING AIR CONDITIONER AUDIO SYSTEM The air conditioner system in your NISSAN vehicle is charged with a refrigerant designed with the environment in mind. RADIO This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is required when servicing your NISSAN air conditioner. Using improper refrigerants or lubricants will cause severe damage to your air conditioner system. For additional information, refer to “Air conditioner system refrigerant and oil recommendations” in the “Technical and consumer information” section of this manual. A NISSAN dealer is able to service your “environmentally friendly” air conditioning system. WARNING The air conditioner system contains refrigerant under high pressure. To avoid personal injury, any air conditioner service should be done only by an experienced technician with proper equipment. With the ignition placed in the ACC or ON position, press the PWR (power)/ON•OFF button/VOL (volume) knob to turn the radio on. If you listen to the radio with the engine not running, the ignition should be placed in the ACC position. Radio reception is affected by station signal strength, distance from radio transmitter, buildings, bridges, mountains and other external influences. Intermittent changes in reception quality normally are caused by these external influences. Using a cellular phone in or near the vehicle may influence radio reception quality. Radio reception Your NISSAN radio system is equipped with state-of-the-art electronic circuits to enhance radio reception. These circuits are designed to extend reception range, and to enhance the quality of that reception. However, there are some general characteristics of both FM and AM radio signals that can affect radio reception quality in a moving vehicle, even when the finest equipment is used. These characteristics are completely normal in a given reception area and do not indicate any malfunction in your NISSAN radio system. Reception conditions will constantly change because of vehicle movement. Buildings, terrain, signal distance and interference from other vehicles can work against ideal reception. Described below are some of the factors that can affect your radio reception. Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise. FM RADIO RECEPTION Range: FM range is normally limited to 25 – 30 mi (40 – 48 km), with monaural (single channel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM station reception even if the FM station is within 25 mi (40 km). The strength of the FM signal is directly related to the distance between the transmitter and receiver. FM signals follow a lineof-sight path, exhibiting many of the same characteristics as light. For example, they will reflect off objects. Fade and drift: As your vehicle moves away from a station transmitter, the signals will tend to fade and/or drift. Monitor, climate, audio, phone and voice recognition systems 4-21 Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter), static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response. Multipath reception: Because of the reflective characteristics of FM signals, direct and reflected signals reach the receiver at the same time. The signals may cancel each other, resulting in momentary flutter or loss of sound. AM RADIO RECEPTION AM signals, because of their low frequency, can bend around objects and skip along the ground. In addition, the signals can be bounced off the ionosphere and bent back to earth. Because of these characteristics, AM signals are also subject to interference as they travel from transmitter to receiver. Fading: Occurs while the vehicle is passing through freeway underpasses or in areas with many tall buildings. It can also occur for several seconds during ionospheric turbulence even in areas where no obstacles exist. SATELLITE RADIO RECEPTION (if so equipped) When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with satellite radio ON and the vehicle outside of any metal or large building for satellite radio to receive all of the necessary data. No satellite radio reception is available and “NO SAT” is displayed when the SAT band option is selected unless optional satellite receiver and antenna are installed and a SiriusXM® Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. Satellite radio performance may be affected if cargo carried on the roof blocks the satellite radio signal. If possible, do not put cargo over the satellite antenna. A build up of ice on the satellite radio antenna can affect satellite radio performance. Remove the ice to restore satellite radio reception. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights. 4-22 Monitor, climate, audio, phone and voice recognition systems LHA0099 AUDIO OPERATION PRECAUTIONS Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD player. ● Trying to load a CD with the CD door closed could damage the CD and/or CD player. ● Only one CD can be loaded into the CD player at a time. ● Only use high quality 4.7 in (12 cm) round discs that have the “COMPACT disc DIGITAL AUDIO” logo on the disc or packaging. ● During cold weather or rainy days, the player may malfunction due to the humidity. If this occurs, remove the CD and dehumidify or ventilate the player completely. ● The player may skip while driving on rough roads. ● The CD player sometimes cannot function when the compartment temperature is extremely high or low. Decrease/increase the temperature before use. ● Do not expose the CD to direct sunlight. ● CDs that are in poor condition or are dirty, scratched or covered with fingerprints may not work properly. ● The following CDs may not work properly: ● Copy control compact discs (CCCD) ● Recordable compact discs (CD-R) ● Rewritable compact discs (CD-RW) ● Do not use the following CDs as they may cause the CD player to malfunction: CHECK DISC ● Confirm that the CD is inserted correctly (the label side is facing up, etc.). ● Confirm that the CD is not bent or warped and it is free of scratches. PRESS EJECT This is an error due to excessive temperature inside the player. Remove the CD by pressing the EJECT button. After a short time, reinsert the CD. The CD can be played when the temperature of the player returns to normal. ● 3.1 in (8 cm) discs with an adapter UNPLAYABLE ● CDs that are not round The file is unplayable in this audio system (only MP3 or WMA (if so equipped) CD). ● CDs with a paper label ● CDs that are warped, scratched, or have abnormal edges ● This audio system can only play prerecorded CDs. It has no capability to record or burn CDs. ● If the CD cannot be played, one of the following messages will be displayed. Monitor, climate, audio, phone and voice recognition systems 4-23 Compact disc with MP3 or WMA (if so equipped) Terms ● Sampling frequency — Sampling frequency is the rate at which the samples of a signal are converted from analog to digital (A/D conversion) per second. ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well-known compressed digital audio file format. This format allows for near “CD quality” sound, but at a fraction of the size of normal audio files. MP3 conversion of an audio track from CD-ROM can reduce the file size by approximately a 10:1 ratio with virtually no perceptible loss in quality. MP3 compression removes the redundant and irrelevant parts of a sound signal that the human ear doesn’t hear. ● Multisession — Multisession is one of the methods for writing data to media. Writing data once to the media is called a single session, and writing more than once is called a multisession. ● WMA — Windows Media Audio (WMA)* is a compressed audio format created by Microsoft as an alternative to MP3. The WMA codec offers greater file compression than the MP3 codec, enabling storage of more digital audio tracks in the same amount of space when compared to MP3s at the same level of quality. * Windows® and Windows Media® are registered trademarks and trademarks in the United States of America and other countries of Microsoft Corporation of the USA. ● ID3/WMA Tag — The ID3/WMA tag is the part of the encoded MP3 or WMA file that contains information about the digital music file such as song title, artist, encoding bit rate, track time duration, etc. ID3 tag information is displayed on the Artist/song title line on the display. ● Bit rate — Bit rate denotes the number of bits per second used by a digital music file. The size and quality of a compressed digital audio file is determined by the bit rate used when encoding the file. 4-24 Monitor, climate, audio, phone and voice recognition systems WHA1078 Playback order chart Playback order Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display. ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order. Specification chart Supported media Supported file systems MP3 Supported versions*1 WMA Version Sampling frequency Bit rate Version Sampling frequency Bit rate Tag information Folder levels Text character number limitation Displayable character codes*2 CD, CD-R, CD-RW ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. MPEG1, MPEG2, MPEG2.5 8 kHz - 48 kHz 8 kbps - 320 kbps, VBR WMA7, WMA8, WMA9 32 kHz - 48 kHz 48 kbps - 192 kbps, VBR ID3 tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only) Folder levels: 8, Max folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder) 128 characters 01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian) *1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played. *2 Available codes depend on what kind of media, versions and information are going to be displayed. Monitor, climate, audio, phone and voice recognition systems 4-25 Troubleshooting guide Symptom Cannot play Poor sound quality It takes a relatively long time before the music starts playing. Music cuts off or skips Skipping with high bit rate files Moves immediately to the next song when playing Songs do not play back in the desired order Cause and Countermeasure Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature. If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will be played. Files with extensions other than “.MP3”,“.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number of characters for folder names and file names should be in compliance with the specifications. Check if the finalization process, such as session close and disc close, is done for the disc. Check if the disc is protected by copyright. Check if the disc is scratched or dirty. Bit rate may be too low. If there are many folders or file levels on the MP3/WMA disc, or if it is a multisession disc, some time may be required before the music starts playing. The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not match the specifications. Try using the slowest writing speed. Skipping may occur with large quantities of data, such as for high bit rate data. When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, .“mp3”or “.wma”, or when play is prohibited by copyright protection, there will be approximately 5 seconds of no sound and then the player will skip to the next song. The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order. 4-26 Monitor, climate, audio, phone and voice recognition systems USB (Universal Serial Bus) Connection Port (if so equipped) WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port. This could damage the port and the cover. ● Do not leave the USB cable in a place where it can be pulled unintentionally. Pulling the cable may damage the port. The vehicle is not equipped with a USB device. USB devices should be purchased separately as necessary. This system cannot be used to format USB devices. To format a USB device, use a personal computer. In some states/area, the USB device for the front seats plays only sound without images for regulatory reasons, even when the vehicle is parked. This system supports various USB memory devices, USB hard drives and iPod® players. Some USB devices may not be supported by this system. ● Partitioned USB devices may not play correctly. ● Some characters used in other languages (Chinese, Japanese, etc.) may not appear properly in the display. Using English language characters with a USB device is recommended. General notes for USB use ● Refer to your device manufacturer’s owner information regarding the proper use and care of the device. Notes for iPod® use ● Improperly plugging in the iPod® may cause a checkmark to be displayed on and off (flickering). Always make sure that the iPod® is connected properly. ● An iPod® nano (1st Generation) may remain in fast forward or rewind mode if it is connected during a seek operation. In this case, please manually reset the iPod®. ● An iPod® nano (2nd Generation) will continue to fast-forward or rewind if it is disconnected during a seek operation. ● An incorrect song title may appear when the Play Mode is changed while using an iPod® nano (2nd Generation). ● Audiobooks may not play in the same order as they appear on an iPod®. ● Large video files cause slow responses in an iPod®. The vehicle center display may momentarily black out, but will soon recover. ● If an iPod® automatically selects large video files while in the shuffle mode, the vehicle center display may momentarily black out, but will soon recover. iPod® is a trademark of Apple Inc., registered in the U.S. and other countries. Monitor, climate, audio, phone and voice recognition systems 4-27 Bluetooth® streaming audio (if so equipped) ● Some Bluetooth® audio devices may not be recognized by the in-vehicle audio system. ● It is necessary to set up the wireless connection between a compatible Bluetooth® audio device and the in-vehicle Bluetooth® module before using the Bluetooth® audio. ● Operating procedure of the Bluetooth® audio will vary depending on the devices. Make sure how to operate your audio device before using it with this system. ● While an audio device is connected through the Bluetooth® wireless connection, the battery power of the device may discharge quicker than usual. ● This system supports the Bluetooth® Audio Distribution Profile (A2DP, AVRCP). BLUETOOTH® is a trademark owned by Bluetooth SIG, Inc. and licensed to Bosch. ● The Bluetooth® audio may be stopped under the following conditions: ● Receiving a call on the Hands-Free Phone System ● Checking the connection to the handsfree phone ● Do not place the Bluetooth® audio device in an area surrounded by metal or far away from the in-vehicle Bluetooth® module to prevent tone quality degradation and wireless connection disruption. 4-28 Monitor, climate, audio, phone and voice recognition systems 7. TUNE button 8. RPT (repeat) button 9. AUX (auxiliary) IN jack 10. SCAN button 11. PWR (power) button/VOL (volume) control knob 12. RDM (random) button 13. Station select (1 - 6) buttons SEEK button 14. For additional information on all operation precautions, refer to ⬙Audio operation precautions⬙ in this section. Audio main operation PWR (power) button and VOL (volume) control knob LHA2057 FM/AM RADIO WITH COMPACT DISC (CD) PLAYER (Type A) (if so equipped) 1. FM·AM button 2. 3. CD button 4. CD insert slot 5. AUX button Place the ignition switch in the ACC or ON position, then press the PWR (power) button. If you listen to the radio with the engine not running, place the ignition switch in the ACC position. The mode (radio or CD) that was playing immediately before the system was turned off resumes playing. 6. MENU button CD eject button Monitor, climate, audio, phone and voice recognition systems 4-29 When no CD is loaded, the radio comes on. Pressing the PWR button again turns the system off. Turn the VOL control knob to the right to increase volume or to the left to decrease volume. MENU button (BASS, TREBLE, FADE, BALANCE and CLOCK) Press the MENU button to change the mode as follows: BAS → TRE → FAD → BAL → CLOCK → BAS To adjust Bass, Treble, Fade and Balance, press the MENU button until the desired mode appears in the display. Press the SEEK button to adjust Bass and Treble to the desired level. You can also use the SEEK button to adjust Fade and Balance modes. Balance adjusts the sound between the right and left speakers. Since this vehicle is not equipped with rear speakers, adjusting the fade to the rear of the vehicle will reduce the volume until no sound is played. Once you have adjusted the sound quality to the desired level, press the MENU button repeatedly until the radio or CD display reappears. Otherwise, the radio or CD display will automatically reappear after about 10 seconds. NOTE: If the clock is enabled, pressing the MENU button will change the mode as follows: BAS → TRE → FAD → BAL → CLOCK → Hour adjustment → Minute adjustment → BAS For additional information on setting the clock, refer to “Clock set” in this section. Clock operation Press the MENU button until CLOCK is disSEEK button to turn played; use the the clock display on (CLK ON) or off (CLK OFF). Clock set If the clock is not displayed with the ignition switch in the ACC or ON position, you need to select the CLK ON mode. Press the MENU button repeatedly until CLOCK is displayed. Use the SEEK button to enable CLK ON mode. 1. Press the MENU button repeatedly until CLOCK mode appears; press the button until CLK ON appears. SEEK 2. Press the MENU button again; the hours will start flashing. 3. Press the just the hour. SEEK button to ad- 4. Press the MENU button again; the display will switch to the minute adjustment mode. 4-30 Monitor, climate, audio, phone and voice recognition systems 5. The minutes will start flashing. Press SEEK button to adjust the minutes. 6. Press the MENU button again to exit the clock set mode. The display will return to the regular clock display after 10 seconds, or press the MENU button again to return to the regular clock display. Resetting the time Hold the MENU button down and then press the TUNE or SEEK button; the time will reset as follows: ● If the displayed minutes before the reset are in the range of :00 - :29, the hour displayed before the reset will stay the same and the minutes will be reset to :00. ● If the displayed minutes before the reset are in the range of :30 - :59, the hour displayed before the reset will advance by one hour and the minutes will be reset to :00. For example, if the MENU button and the TUNE or SEEK button are pressed while the time displayed is between 8:00 and 8:29, the display will be reset to 8:00. If the buttons were pressed while the time was between 8:30 and 8:59, the display will be reset to 9:00. At the same time the display will return to the audio. FM/AM radio operation FM·AM button Press the FM·AM button to change the band as follows: FM1 → FM2 → AM → FM1 The FM stereo indicator, ST (STEREO), illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. TUNE buttons Manual tuning TUNE button for less than Press the 0.5 seconds for manual tuning. To move quickly through the channels, press and TUNE hold either more than 1.5 seconds. SEEK button down for buttons SEEK tuning Press the SEEK button to seek through the frequencies. Seek tuning begins from low to high frequencies, or high to low frequencies, depending on which button is pressed, and stops at the next broadcasting station. Once the highest broadcasting station is reached, the radio continues in the seek mode at the lowest broadcasting station. Station memory operations Twelve stations can be set for the FM band (six for FM1 and six for FM2) and 6 stations can be set for the AM band to the preset buttons. 1. Press the FM-AM button to change to the desired band. 2. Tune to the desired station using manual TUNE or SEEK tuning. Press and hold any of the desired station memory buttons (1 – 6) until a beep sound is heard. (The radio mutes when the select button is pressed.) 3. The channel indicator will then come on and the sound will resume. Programming is now complete. 4. Other buttons can be set in the same manner. If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Compact disc (CD) player operation If the radio is already operating, it automatically turns off and the compact disc begins to play. CD button When the CD button is pressed with a compact disc loaded and the radio playing, the radio turns off and the last used compact disc starts to play. TUNE (rewind and fast forward) buttons When the TUNE button is pressed while the compact disc is playing, the compact disc plays at an increased speed while rewinding or fast forwarding. When the button is released, the compact disc returns to normal play speed. SEEK buttons is pressed while the compact disc When is playing, the next track following the present one starts to play from the beginning. several times to skip several tracks. Press Each time the button is pressed, the CD advances 1 additional track. The track number appears in the display window. (When the last track on the compact disc is skipped, the first track is played.) is pressed, the track being played When several returns to the beginning. Press times to skip back several tracks. Each time the button is pressed, the CD moves back one track. Monitor, climate, audio, phone and voice recognition systems 4-31 RPT (repeat) button When the RPT button is pressed while the compact disc is being played, the play pattern can be changed as follows: 1 ←→ Normal 1: The track that is currently playing will be repeated. CD EJECT button When the CD eject button is pressed with a compact disc loaded, the compact disc will be ejected. CD eject button is pressed When the while the compact disc is being played, the compact disc will eject and the system will turn off. RDM (random) button When the RDM button is pressed while the compact disc is being played, the play pattern can be changed as follows: RDM ←→ Normal RDM: Tracks from the disc that is currently playing will be played randomly. AUX (Auxiliary) button The AUX IN jack is located on the CD player. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computers. Press the AUX button to play a compatible device when it is plugged into the AUX IN jack. 4-32 Monitor, climate, audio, phone and voice recognition systems 7. AUX (auxiliary) button 8. CLOCK button 9. 10. CD eject button TUNE/FF-REW/FOLDER button 11. SPEED VOL (volume) button 12. AUDIO button 13. AUX IN jack 14. Station select (1 - 6) buttons 15. VOL (volume) control knob 16. PWR (power) button 17. SCAN button 18. RPT (repeat) button 19. RDM (random) button LHA2050 FM/AM RADIO WITH COMPACT DISC (CD) PLAYER (Type B) (if so equipped) 1. MUTE button 2. DISP (display)/TEXT button 3. AM button Audio main operation 4. FM button 5. CD insert slot 6. CD button SEEK/TRACK button 20. For additional information on all operation precautions, refer to ⬙Audio operation precautions⬙ in this section. POWER/VOLUME control: Place the ignition switch in the ACC or ON position. Press the PWR (power) button while the system is off to call up the mode (radio, CD or Monitor, climate, audio, phone and voice recognition systems 4-33 AUX) that was playing immediately before the system was turned off. While the system is on, pressing the PWR button turns the system off. Turn the VOL (volume) control knob to adjust the volume. MUTE button Press the button to mute the audio sound. button again to resume playing Press the the audio at its previous volume. AUDIO button (Bass, Treble, Fade, Balance, SSV, Beep) Press the AUDIO button to change the mode as follows: Bass → Treble → Fade → Balance → Beep ON/OFF → BAS To adjust Bass, Treble, Fade and Balance, press the AUDIO button until the desired mode appears in the display. Press the TUNE or or SEEK or button to adjust the selected mode to the desired level. Balance adjusts the sound between the right and left speakers. Since this vehicle is not equipped with rear speakers, adjusting the fade to the rear of the vehicle will reduce the volume until no sound is played. To change the Beep to ON or OFF, press the TUNE button up or down until the desired mode is displayed. This will enable or disable the beep sound heard during menu selection. SPEED VOL button 4. Press the CLOCK button again to exit the clock set mode. If no action is taken, the display will return to the regular clock display after 10 seconds. FM/AM radio operation To change the Speed Sensitive Volume (SSV) mode to Off, Low, Mid or High, press the SPEED VOL button until the desired setting is displayed. AM button Press the AM button to change the band to AM. Once you have adjusted the sound quality to the desired level, press the AUDIO button repeatedly until the radio or CD display reappears. If no action is taken, the radio or CD display will automatically reappear after approximately 5 seconds. If another audio source is playing when the AM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. Clock set Press the FM button to change the band as follows: If the clock is not displayed with the ignition switch in the ACC or ON position, press the CLOCK button to resume the display. Pressing the CLOCK button toggles the clock display on and off. 1. Press and hold the CLOCK button until the clock display starts to flash. 2. Press or 3. Press button the SEEK/TRACK button to adjust the hours. the or TUNE/FF-REW/FOLDER to adjust the minutes. 4-34 Monitor, climate, audio, phone and voice recognition systems FM button FM1 → FM2 → FM1 If another audio source is playing when the FM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. The FM stereo indicator (ST) illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. TUNE button (Tuning): Press button the or TUNE/FF-REW/FOLDER for manual tuning. SEEK tuning Press the SEEK/TRACK button or to tune from low to high or high to low frequencies and to stop at the next broadcasting station. SCAN tuning Press the SCAN button to stop at each broadcasting station for 5 seconds. Pressing the button again during this 5 second period will stop SCAN tuning and the radio will remain tuned to that station. If the SCAN button is not pressed within 5 seconds, SCAN tuning moves to the next station. 1 to 6 Station memory operations Twelve stations can be set for the FM band (six for FM1, six for FM2) and six stations can be set for the AM band. 1. Choose the radio band AM, FM1 or FM2 using the AM or FM button. 2. Tune to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until a beep sound is heard. 3. The channel indicator will then come on and the sound will resume. Programming is now complete. 4. Other buttons can be set in the same manner. If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Compact disc (CD) player operation If the radio is already operating, it automatically turns off and the compact disc begins to play. CD button When the CD button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play. When the CD button is pressed with a compact disc loaded and the radio playing, the radio will automatically be turned off and the compact disc will start to play. DISP/TEXT button When the DISP/TEXT button is pressed while a CD is playing, the display will change as follows: CD: Track number → Disc title → Song title → Track number CD with MP3 or WMA: Track number → Folder title → Album title → Artist → Song title → Track number TUNE/FF-REW/FOLDER (Reverse or Fast Forward) button CD: When the TUNE/FF-REW/FOLDER button (fast forward) or (reverse) is pressed while the compact disc is playing, the compact disc plays at an increased speed while reversing or fast forwarding. When the button is released, the compact disc returns to normal play speed. CD with MP3 or WMA: When the TUNE/FF-REW/FOLDER button (fast forward) or (reverse) is pressed for less than 1.5 seconds while the compact disc is playing, the folders in the CD will change. When the TUNE/FF-REW/FOLDER button (fast forward) or (reverse) is pressed for more than 1.5 seconds while the compact disc is playing, the compact disc plays at an increased speed while reversing or fast forwarding. When the button is released, the compact disc returns to normal play speed. Monitor, climate, audio, phone and voice recognition systems 4-35 SEEK/TRACK button is When the SEEK/TRACK button pressed while the compact disc is playing, the next track following the present one starts to play from the beginning. Press the SEEK/TRACK several times to skip several tracks. button Each time the button is pressed, the CD advances one additional track. The track number appears in the display window. (When the last track on the compact disc is skipped, the first track is played.) is When the SEEK/TRACK button pressed, the track being played returns to the beginning. Press the SEEK/TRACK several times to skip back several button tracks. Each time the button is pressed the CD moves back one track. RPT (repeat) button When the RPT (repeat) button is pressed while a compact disc is playing, the play pattern can be changed as follows: TRACK REPEAT: the current track will be repeated. DISC REPEAT: play pattern returns to normal. FOLDER REPEAT: the current folder will be repeated. RDM (random) button When the RDM (random) button is pressed while a compact disc is playing, the play pattern can be changed as follows: CD: DISC RANDOM → DISC REPEAT CD with MP3 or WMA: DISC RANDOM → FOLDER RANDOM → DISC REPEAT DISC RANDOM: all tracks on the disc will be played randomly. FOLDER RANDOM: all tracks in the current folder will be played randomly. DISC REPEAT: play pattern returns to normal. CD: TRACK REPEAT → DISC REPEAT CD with MP3 or WMA: FOLDER REPEAT → TRACK REPEAT → DISC REPEAT 4-36 Monitor, climate, audio, phone and voice recognition systems AUX (Auxiliary) button The AUX IN jack is located on the front of the radio. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or a laptop computer. Press the AUX button to play a compatible device when it is plugged into the AUX IN jack. EJECT button When the button is pressed with a compact disc loaded, the compact disc will eject and the last source will be played. button is pressed twice with a When the compact disc loaded, the compact disc will be ejected further for easier CD removal. If the disc is not removed within 15 seconds, the disc will reload. 7. AUDIO button / TUNE knob 8. Display screen 9. ON-OFF button / VOL (volume) control knob 10. CD button 11. SXM button* *No satellite radio reception is available when the SXM button is pressed to access satellite radio stations unless optional satellite receiver and antenna are installed and a SiriusXM® Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. For additional information on all operation precautions, refer to “Audio operation precautions” in this section. Audio main operation ON-OFF button / VOL (volume) control knob LHA2895 FM/AM/SAT RADIO WITH COMPACT DISC (CD) PLAYER (if so equipped) 1. CD eject button 2. FM-AM button 3. AUX (auxiliary) button 4. CD insert slot 5. Backward seek button and Forward seek button 6. BACK button Place the ignition switch in the ACC or ON position and press the ON-OFF button while the system is off to call up the mode (radio, CD, AUX, Bluetooth® audio USB or iPod®) that was playing immediately before the system was turned off. To turn the system off, press the ON-OFF button. Monitor, climate, audio, phone and voice recognition systems 4-37 Turn the VOL (volume) control knob to adjust the volume. This vehicle may be equipped with Speed Sensitive Volume. When this feature is active, the audio volume changes as the driving speed changes. Audio settings 1. Press the [ ] button. 2. Touch the “Settings” key. 3. Touch the “Audio” key. Use the touch-screen to adjust the following items to the desired setting: Audio Bass Treble Balance Fade Speed Sensitive Vol. AUX Volume Level Adjusts the bass to the desired level. Adjusts the treble to the desired level. Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers. Adjusts the fade to the desired level. Fade adjusts the sound level between the front and rear speakers. Adjusts the speed sensitive volume function, which increases the volume of the audio system as the speed of the vehicle increases. Set to “OFF” to disable the feature. The higher the setting, the more the volume increases in relation to vehicle speed. Controls the volume level of incoming sound when an auxiliary device is connected to the system. Available options are Low (Quiet), Medium, and High (Loud). Bass, treble, balance and fade can also be adjusted by pressing the AUDIO button and turning the TUNE knob to select the item to adjust. When the desired item is shown on the display, turn the tuning to adjust and then press the AUDIO button until the display returns to the main audio screen. If the button is not pressed for approximately 10 seconds, the radio or CD display will automatically reappear. 4-38 Monitor, climate, audio, phone and voice recognition systems SXM settings To view the SXM settings: 1. Press the [ ] button. 2. Touch the “Settings” key. 3. Touch the “SXM” key. The signal strength, activation status and other information are displayed on the screen. FM/AM/SAT radio operation FM·AM button Press the FM·AM button to change the band as follows: AM → FM1 → FM2 → AM If another audio source is playing when the FM·AM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. The FM stereo indicator (ST) is shown on the screen during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. SXM band select: Pressing the SXM button will change the band as follows: SXM1* → SXM2* → SXM3*→ SXM1* (satellite, if so equipped) When the SXM button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the last station played. The last station played will also come on when the ON-OFF/VOL control knob is pressed. *When the SXM button is pressed, the satellite radio mode will be skipped unless an optional satellite receiver and antenna are installed and a SiriusXM® Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. If a compact disc is playing when the SXM button is pressed, the compact disc will automatically be turned off and the last radio station played will come on. While the radio is in SXM mode, the operation can be controlled through the touch-screen. Touch the “Channels” key to display a list of channels. Touch a channel displayed on the list to change to that channel. Touch the “Categories” key to display a list of categories. Touch a category displayed on the list to display options within that category. Tuning with the touch-screen: When in AM or FM mode, the radio can be tuned using the touch-screen. To bring up the visual tuner, touch the “Tune” key on the lower right corner of the screen. A screen appears with a bar running from low frequencies on the left to high frequencies on the right. Touch the screen at the location of the frequency you wish to tune and the station will change to that frequency. To return to the regular radio display screen, touch the “OK” key. Tuning with the TUNE control knob: The radio can also be manually tuned using the TUNE knob. When in FM or AM mode, turn the TUNE control knob to the left for lower frequencies or to the right for higher frequencies. When in SXM mode, turn the TUNE control knob to change the channel. SEEK tuning When in FM or AM mode, press the seek or to tune from low to high buttons or high to low frequencies and to stop at the next broadcasting station. When in SXM mode, press the seek or to change the category. buttons Monitor, climate, audio, phone and voice recognition systems 4-39 3. The channel indicator will then come on and the sound will resume. Programming is now complete. 4. Other buttons can be set in the same manner. If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Presets can also be selected by touching the desired preset number on the screen. LHA2899 1 to 6 Station memory operations: Twelve stations can be set for the FM band (6 for FM1, 6 for FM2) and six stations can be set for the AM band. Eighteen stations can be set for the SXM band (6 for SXM1, 6 for SXM2 and 6 for SXM3). 1. Choose the radio band AM, FM1 or FM2 using the FM·AM select button or choose the radio band SXM1, SXM2 and SXM3 using the SXM button. 2. Tune to the desired station using manual or seek tuning. Press and hold any of the desired station memory buttons (1 – 6) until a beep sound is heard. 4-40 Monitor, climate, audio, phone and voice recognition systems LHA3085 Smart Favorites Preset Setup (if so equipped): The Smart Favorites feature allows the user to designate presets, within the SXM1, SXM2 and SXM3 bands, as their Smart Favorites. When any of the Smart Favorite presets are selected, the current track on that station will play from the beginning of the song. To program a Smart Favorite preset: REPLAY To replay a track from the beginning, press the seek button. The user can continue to press the seek button to replay previous songs, but can only go back as far as the system permits. The system will warn the user when they cannot skip any further back by displaying “At the End” in the bottom left corner of the screen. SKIP To skip a track, press the track button. “Live” will appear in the bottom left corner of the screen indicating the difference from play time to live audio. PAUSE To pause a track, press the pause button. 1. Press the SXM button. 2. Touch the “Setup” key. 3. Touch the “Tune Start” key to activate (ON) or deactivate (OFF) Smart Favorites. 4. Touch the “Add Preset” key to select an available preset. For additional information regarding preset memory options, refer to “1 to 6 station memory operations” in this section. NOTE: • Smart Favorites will start functioning only after the audio unit is turned on for a few minutes. • Tune Start is supported for music channels only. LHA3087 Replay Screen The Replay Screen gives the user the ability to replay, skip, pause or rewind the currently aired track. When the “Replay” key is pressed, the Replay Screen is prompted. Monitor, climate, audio, phone and voice recognition systems 4-41 REWIND/ FAST FORWARD To rewind/ fast forward a CD button track, hold the seek/track button. When the CD button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play. or Compact disc (CD) player operation If the radio is already operating, it automatically turns off and the compact disc begins to play. When the CD button is pressed with a compact disc loaded and the radio playing, the radio will automatically be turned off and the compact disc will start to play. CD/MP3 display mode: Menu item CD/MP3 display mode Random Repeat Browse While listening to a CD or an MP3/WMA CD, certain text may be displayed (when a CD encoded with text is being used). Depending on how the CD or MP3/WMA CD is encoded, the text is displayed listing the artist, album and song title. There are other keys displayed on the screen when a CD is playing: Touch the “Random” key to apply a random play pattern to the CD. If an MP3 CD is playing, touching “Random” or alternates between Random Folder, and Random All. This text will appear on the display. To cancel Random mode, touch the “Random” key until the key is no longer highlighted. Touch the “Repeat” key to apply a repeat play pattern to the CD. If an MP3 CD is playing, touching “Repeat” alternates between repeating the current song and repeating the current folder. This text will appear on the display. To cancel Repeat mode, touch the “Repeat” key until the key is no longer highlighted Touch the “Browse” key to display the titles on the CD in list format. Touch the title of a song in the list to begin playing that song. If an MP3 CD is playing, touching the “Browse” key will also list the folders on the disc. Follow the procedure for selecting a song with the touch-screen to choose a folder. 4-42 Monitor, climate, audio, phone and voice recognition systems SEEK (Reverse or Fast Forward) buttons or Press and hold the seek buttons for 1.5 seconds while the compact disc is playing to reverse or fast forward the track being played. The compact disc plays at an increased speed while reversing or fast forwarding. When the button is released, the compact disc returns to normal play speed. SEEK buttons while a CD or Press the seek button MP3/WMA CD is playing to return to the beginning of the current track. Press the seek several times to skip backward sevbutton eral tracks. while a CD or Press the seek button MP3/WMA CD is playing to advance one track. several times to skip Press the seek button forward several tracks. If the last track on a CD is skipped, the first track on the disc is played. If the last track in a folder of an MP3/WMA CD is skipped, the first track of the next folder is played. AUX button The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or a laptop computer. Press the AUX button to play a compatible device plugged into the AUX IN jack. EJECT button When the button is pressed with a compact disc loaded, the compact disc will eject and the last source will be played. If the disc is not removed within 10 seconds, the disc will reload. Additional features For additional information about the iPod® player available with this system, refer to “iPod® player operation” in this section. For additional information about the USB Connection Port, refer to “USB (Universal Serial Bus) CONNECTION PORT” in this section. For additional information about the Bluetooth® audio interface available with this system, refer to “Bluetooth® streaming audio with Navigation System” in this section. LHA2584 USB (Universal Serial Bus) CONNECTION PORT (if so equipped) Connecting a device to the USB connection port WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. Monitor, climate, audio, phone and voice recognition systems 4-43 CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port. This could damage the port and the cover. Audio file operation AUX (auxiliary) button Place the ignition switch in the ON or ACC position and press the AUX button to switch to the USB input mode. If another audio source is playing and a USB connection port device is inserted, press the AUX button until the center display changes to the USB memory mode. If the system has been turned off while the USB memory was playing, push the ON-OFF/VOL control knob to restart the USB memory. ● Do not leave the USB cable in a place where it can be pulled unintentionally. Pulling the cable may damage the port. Refer to your device manufacturer’s owner information regarding the proper use and care of the device. The USB connection port is located in the center 1 . console. Insert the USB device into the port䊊 When a compatible storage device is plugged into the jack, compatible audio files on the storage device can be played through the vehicle’s audio system. 4-44 Monitor, climate, audio, phone and voice recognition systems LHA1496 Play information Information about the audio files being played is shown on the display screen of the vehicle’s audio system. Touch “Browse” to display the list of folders and files on the USB device. Touch the name of a song on the screen to begin playing that song. Seeking buttons button while an audio file on the Press the USB device is playing to return to the beginning button sevof the current track. Press the eral times to skip backward several tracks. CAUTION Press the button while an audio file on the USB device is playing to advance one track. button several times to skip forPress the ward several tracks. If the last track in a folder on the USB device is skipped, the first track of the next folder is played. ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. Random and repeat play mode While files on a USB device are playing, the play pattern can be altered so that songs are repeated or played randomly. Random Touch the “Random” key to apply a random play pattern to the USB device. When the random icon is displayed to the mode is active, the left of the song title or album name to denote which random pattern is applied. To cancel Random mode, touch the “Random” key until icon is displayed. no Repeat Touch the “Repeat” key to apply a repeat play pattern to the USB device. When the repeat icon is displayed to the mode is active, the left of the song title or album name to denote which repeat pattern is applied. To cancel Repeat icon mode, touch the “Repeat” key until no is displayed. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port. This could damage the port and the cover. LHA2584 iPod®* PLAYER OPERATION (if so equipped) Connecting iPod® WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. ● Do not leave the USB cable in a place where it can be pulled unintentionally. Pulling the cable may damage the port. Refer to your device manufacturer’s owner information regarding the proper use and care of the device. To connect an iPod® to the vehicle so that the iPod® can be controlled with the audio system controls and display screen, use the USB connection port located on the center console below 1 . Conthe heater and air conditioner controls 䊊 nect the iPod®-specific end of the cable to the iPod® and the USB end of the cable to the USB connection port on the vehicle. If your iPod® supports charging via a USB connection, its bat- Monitor, climate, audio, phone and voice recognition systems 4-45 tery will be charged while connected to the vehicle with the ignition switch in the ACC or ON position. While connected to the vehicle, the iPod® can only be operated by the vehicle audio controls. To disconnect the iPod® from the vehicle, remove the USB end of the cable from the USB connection port on the vehicle, then remove the cable from the iPod®. * iPod® is a trademark of Apple Inc., registered in the U.S. and other countries. ● iPod® nano - 1st generation (firmware version 1.3.1 or later) ● iPod® nano - 2nd generation (firmware version 1.1.3 or later) ● iPod® nano - 3rd generation (firmware version 1.1.3 or later) ● iPod® nano - 4th generation (firmware version 1.0.4 or later) ● iPod® nano - 5th generation (firmware version 1.0.2 or later) Compatibility ● iPod® nano - 6th generation (firmware version 1.1 or later) The following models are compatible: ● iPhone® 3G (firmware version 4.2.1 or later) ● iPod® Classic 5th generation (firmware version 1.3.0 or later) ● iPod® Classic 6th generation (firmware version 2.0.1 or later) ● iPhone® 3GS (firmware version 5.1 or later) ● iPhone® 4 (firmware version 5.1 or later) ● iPhone® 4S (firmware version 5.1 or later) ● iPod® Classic 7th generation (firmware version 2.0.4 or later) * Some features of this iPod® may not be fully functional. ● iPod® Touch 2nd generation (firmware version 4.2.1 or later)* Make sure that your iPod® firmware is updated to the version indicated above. ● iPod® Touch 3rd generation (firmware version 5.1 or later) ● iPod® Touch 4th generation (firmware version 5.1 or later) 4-46 Monitor, climate, audio, phone and voice recognition systems LHA2911 Audio main operation Place the ignition switch in the ACC or ON position. Press the AUX button repeatedly to switch to the iPod® mode. If the system has been turned off while the iPod® was playing, pressing the VOL/ON·OFF control knob will start the iPod®. AUX button When the AUX button is pressed with the system off and the iPod® connected, the system will turn on. If another audio source is playing and the iPod® is connected, press the AUX button repeatedly until the center display changes to the iPod® mode. Interface ● Artists The interface for iPod® operation shown on the vehicle’s audio system display screen is similar to the iPod® interface. Use the touch-screen, BACK button or the scrolling knob to navigate the menus on the screen. ● Albums When the iPod® is playing, touch the “Menu” key to bring up the iPod® interface. Depending on the iPod® model, the following items may be available on the menu list screen. For additional information about each item, refer to the iPod® Owner’s Manual. LHA2907 ● Genres ● Songs ● Composers ● Audiobooks ● Podcasts ● Playlists Shuffle and repeat play mode: Item Shuffle and repeat play mode Shuffle Repeat Result While the iPod® is playing, the play pattern can be altered so that songs are repeated or played randomly. Touch the “Shuffle” key to apply a random play pattern to the iPod®. When the shuffle mode is active it will appear on the screen. To cancel shuffle mode, touch the “Shuffle” key until it is not displayed. Touch the “Repeat” key to apply a repeat play pattern to the iPod®. When the repeat mode is active it will appear on the screen. To cancel Repeat mode, touch the “Repeat” key until it is not displayed. Monitor, climate, audio, phone and voice recognition systems 4-47 SEEK/TRACK buttons: BLUETOOTH® STREAMING AUDIO WITH NAVIGATION SYSTEM Press the SEEK button or TRACK button to skip backward or forward one track. If you have a compatible Bluetooth® audio device that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play through the vehicle’s speakers. SEEK button or Press and hold the TRACK button for 1.5 seconds while a track is playing to reverse or fast forward the track being played. The track plays at an increased speed while reversing or fast forwarding. When the button is released, the track returns to normal play speed. LHA2279 Scrolling menus: While navigating long lists of artists, albums or songs in the music menu, it is possible to scroll the list by the first character in the name. To activate character indexing, touch the “A-Z” key in the upper right corner of the screen. Turn the TUNE knob to choose the number or letter to jump to in the list and then press the AUDIO button. 4-48 Monitor, climate, audio, phone and voice recognition systems NOTE: The connecting procedure of the cellular phone varies according to each cellular phone model. For additional information, refer to the cellular phone Owner’s Manual. You can also visit www.nissanusa.com/bluetooth or www.nissan.ca.com/bluetooth for instructions on connecting NISSAN recommended cellular phones. Audio main operation LHA2924 LHA2844 Connecting Bluetooth® audio 4. Touch the “Connect New Device” key. To connect your Bluetooth® audio device to the vehicle, follow the procedure below: 5. The system acknowledges the command and asks you to initiate connecting from the phone handset. 1. Press the [ ] button. To switch to the Bluetooth® audio mode, press the AUX button repeatedly until the Bluetooth® audio mode is displayed on the screen. The controls for the Bluetooth® audio are displayed on the screen. 2. Touch the “Settings” key. 3. Touch the “Phone & Bluetooth” key. Monitor, climate, audio, phone and voice recognition systems 4-49 ● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. LHA0049 CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. ● Do not use a conventional record cleaner or alcohol intended for industrial use. 4-50 Monitor, climate, audio, phone and voice recognition systems LHA2084 1. 2. 3. 4. Tuning switches Phone operation switches SOURCE select switch Volume control switches STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel. NISSANCONNECTSM MOBILE APPS (if so equipped) SOURCE select switch ANTENNA Push the SOURCE select switch to change the mode in the following sequence: AM → FM → SXM (if so equipped) → Bluetooth® audio* (if so equipped) → AUX* → AM The antenna cannot be shortened, but can be removed. When you need to remove the antenna, turn the antenna rod counterclockwise. * These modes are only available when compatible media storage is inserted into the device. Volume control switches Push the volume control switch to increase or decrease the volume. Tuning Memory change (radio): While in one of the preset radio station banks (A, or B or C), push the tuning switch for less than 1.5 seconds to change to the next preset station in memory. Seek tuning (radio): or for more Push the tuning switch than 1.5 seconds to seek the next or previous radio station. Next/Previous track (CD): To install the antenna rod, turn the antenna rod clockwise and hand tighten. CAUTION ● Always properly tighten the antenna rod during installation or the antenna rod may break during vehicle operation. ● Be sure that the antenna is removed before the vehicle enters an automatic car wash. ● Be sure to fold down the antenna before the vehicle enters a garage with a low ceiling. This vehicle is equipped with Smartphone Integration technology. This allows many compatible Smartphone applications to be displayed and easily controlled through the vehicle’s touchscreen. NOTE: A compatible smartphone and registration is required to use mobile applications or to access connected features of certain vehicle applications. REGISTERING WITH NISSANCONNECTSM MOBILE APPS To use the Smartphone Integration feature, it is necessary for the user to register. In order to register, visit the NissanConnectSM website, www.nissanusa.com/connect/ or https://canada.nissanconnect.com (For Canada) and sign up or create an account through the prompts on the NissanConnectSM Mobile App. Once registered, download the NissanConnectSM App from your compatible phone’s application download source and then log into the application. If you already have an account created through the App, please log in. or for less Push the tuning switch than 1.5 seconds to return to the beginning of the present track or skip to the next track. Push several times to skip back or skip through tracks. Monitor, climate, audio, phone and voice recognition systems 4-51 CAR PHONE OR CB RADIO CONNECT PHONE To use this feature, a compatible smartphone must be connected via Bluetooth® or USB to the vehicle. For additional information on connecting your phone, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section. NOTE: Apple iPhones REQUIRE the phone to be plugged in via USB for NissanConnectSM Apps to function. NOTE: For Android phones, NissanConnectSM Apps REQUIRES the phone to be paired via Bluetooth. APPLICATION DOWNLOAD SM Once connected, the NissanConnect App will search your phone to determine which compatible applications are currently installed. The user will then choose which apps they want to bring into their vehicle from the list of apps within the “Manage My Apps” section of the NissanConnectSM App on their smartphone. The vehicle will then download the in-vehicle interface for each of these compatible applications. Once downloaded, the user can access their selected smartphone applications through the vehicle touchscreen. For additional information on application availability visit www.nissanusa.com/connect/ or www.canada.nissanconnect.com When installing a CB, ham radio or car phone in your vehicle, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular phone should not be used for any purpose while driving so full attention may be given to vehicle operation. Some jurisdictions prohibit the use of cellular phones while driving. ● If you must make a call while your vehicle is in motion, the hands free cellular phone operational mode (if so equipped) is highly recommended. Exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle. 4-52 Monitor, climate, audio, phone and voice recognition systems BLUETOOTH® HANDS-FREE PHONE SYSTEM WITHOUT NAVIGATION SYSTEM (if so equipped) CAUTION ● Keep the antenna as far away as possible from the electronic control modules. ● Keep the antenna wire more than 8 in (20 cm) away from the electronic control system harnesses. Do not route the antenna wire next to any harness. ● Adjust the antenna standing-wave ratio as recommended by the manufacturer. ● Connect the ground wire from the CB radio chassis to the body. ● For details, consult a NISSAN dealer. WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle. CAUTION To avoid discharging the vehicle battery, use a phone after starting the engine. Monitor, climate, audio, phone and voice recognition systems 4-53 phone module when the ignition switch is placed in the ON position with the previously connected cellular phone turned on and carried in the vehicle. NOTE: Some devices require the user to accept connections to other Bluetooth® devices. If your phone does not connect automatically to the system, consult the phone’s Owner’s Manual for details on device operation. You can connect up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. Before using the Bluetooth® Hands-Free Phone System, refer to the following notes. ● Set up the wireless connection between a compatible cellular phone and the in-vehicle phone module before using the hands-free phone system. LHA3088 Your NISSAN is equipped with the Bluetooth® Hands-Free Phone System. If you have a compatible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology, you can make or receive a hands-free telephone call with your cellular phone in the vehicle. Once your cellular phone is connected to the in-vehicle phone module, no other phone connecting procedure is required. Your phone is automatically connected with the in-vehicle 4-54 Monitor, climate, audio, phone and voice recognition systems ● Some Bluetooth® enabled cellular phones may not be recognized or work properly. Please visit www.nissanusa.com/bluetooth for a recommended phone list and connecting instructions. ● You will not be able to use a hands-free phone under the following conditions: – Your vehicle is outside of the cellular service area. – Your vehicle is in an area where it is difficult to receive a cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area. – Your cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice during a call. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption. ● While a cellular phone is connected through the Bluetooth® wireless connection, the battery power of the cellular phone may discharge quicker than usual. The Bluetooth® Hands-Free Phone System cannot charge cellular phones. ● If the hands-free phone system seems to be malfunctioning, refer to “Troubleshooting guide” in this section. You can also visit www.nissanusa.com/bluetooth for troubleshooting help. ● Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise. ● Refer to the cellular phone Owner’s Manual regarding the telephone charges, cellular phone antenna and body, etc. REGULATORY INFORMATION FCC Regulatory information – CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. – Operation is subject to the following two conditions: IC Regulatory information – Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. – This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations. BLUETOOTH® is a trademark owned by Bluetooth SIG, Inc. and licensed to Visteon. USING THE SYSTEM The NISSAN Voice Recognition system allows hands-free operation of the Bluetooth® HandsFree Phone System. If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation. 1. This device may not cause interference and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Monitor, climate, audio, phone and voice recognition systems 4-55 Initialization When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initialized, button is which takes a few seconds. If the pressed before the initialization completes, the system will announce “Hands-free phone system not ready” and will not react to voice commands. Operating tips To get the best performance out of the NISSAN Voice Recognition system, observe the following: ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing voice commands correctly. ● Wait until the tone sounds before speaking a command. Otherwise, the command will not be received properly. ● Start speaking a command within 5 seconds after the tone sounds. ● Speak in a natural voice without pausing between words. Giving voice commands To operate NISSAN Voice Recognition, press button located on the and release the steering wheel. After the tone sounds, speak a command. The command given is picked up by the microphone, and voice feedback is given when the command is accepted. ● If you need to hear the available commands for the current menu again, say “Help” and the system will repeat them. ● If a command is not recognized, the system announces, “Command not recognized. Please try again.” Make sure the command is said exactly as prompted by the system and repeat the command in a clear voice. ● If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a response. 4-56 Monitor, climate, audio, phone and voice recognition systems ● You can cancel a command when the system is waiting for a response by saying, “Cancel” or “Quit.” The system announces “Cancel” and ends the Voice Recognition session. You can also press and hold button on the steering wheel for the 5 seconds at any time to end the Voice Recognition session. Whenever the Voice Recognition session is cancelled, a double beep is played to indicate you have exited the system. ● If you want to adjust the volume of the voice feedback, press the volume control switches (+ or -) on the steering wheel while being provided with feedback. You can also use the radio volume control knob. ● In most cases you can interrupt the voice feedback to speak the next command by button on the steering pressing the wheel. ● To use the system faster, you may speak the second level commands with the main menu command on the main menu. For example, button and after the tone press the say, “Call Redial.” How to say numbers Example: 1-800-662-6200 NOTE: NISSAN Voice Recognition requires a certain way to speak numbers in voice commands. Refer to the following rules and examples. – “One eight zero zero” For best results, say phone numbers as single digits. The voice command “Help” is available at any time. Please use the “Help” command to get information on how to use the system. ● Either “zero” or “oh” can be used for “0”. Example: 1-800-662-6200 – “One eight oh oh six six two six two oh oh”, or – “One eight zero zero six six two six two oh oh” ● Words can be used for the first 4 digits places only. Example: 1-800-662-6200 The system repeats the numbers and prompts you to enter more. – “Six six two” The system repeats the numbers and prompts you to enter more. – “Six two zero zero” ● Say “pound” for “#”. Say “star” for “*” (available when using the “Special Number” command and the “Send” command during a call). – “One eight hundred six six two six two oh oh”, For additional information, refer to “List of voice commands” and “Special number” in this section. – NOT “One eight hundred six six two sixty two hundred,” and Example: 1-555-1212 *123 – NOT “One eight oh oh six six two sixty two hundred” ● Numbers can be spoken in small groups. The system will prompt you to continue entering digits, if desired. – “One five five five one two one two star one two three” Voice Prompt Interrupt While using the voice recognition system, the system voice can be interrupted to allow the user to speak commands. While the system is speakbutton on the steering ing, press the wheel. The system voice will stop and a tone will be heard. After the tone, speak desired command (displayed on the touch-screen). One Shot Call To use the system faster, you may speak the second level commands with the main menu command on the main menu. For example, press button and after the tone say, “Call the Redial”. ● Say “plus” for “+” (available only when using the “Special Number” command). ● Say “pause” for a 2-second pause (available only when storing a phonebook number). Monitor, climate, audio, phone and voice recognition systems 4-57 You can also use the button to interrupt the system feedback and give a command at once. For additional information, refer to “List of voice commands” and “During a call” in this section. GETTING STARTED The following procedures will help you get started using the Bluetooth® Hands-Free Phone System with NISSAN Voice Recognition. For additional information, refer to “List of voice commands” in this section. Choosing a language LHA2087 CONTROL BUTTONS The control buttons for the Bluetooth® HandsFree Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a Voice Recognition session or answer an incoming call. PHONE/END While the Voice Recognition system is active, press and hold the button for 5 seconds to quit the Voice Recognition system at any time. ENTER button / tuning switch While using the Voice Recognition system, tilt the tuning switch up or down to manually control the phone system. Press the ENTER button to select an option on the display screen. You can interact with the Bluetooth® HandsFree Phone System using English, Spanish or French. To change the language, perform the following. 1. Press and hold the than 5 seconds. button for more 2. The system announces: “Press the ) button for the PHONE/SEND ( hands-free phone system to enter the voice adaptation (VA) mode or press the ) button to select a difPHONE/END ( ferent language.” 3. Press the button. For additional information, refer to “Voice adaptation (VA) mode” regarding voice adaptation in this section. 4. The system announces the current language and gives you the option to change the language to Spanish (in Spanish) or French (in 4-58 Monitor, climate, audio, phone and voice recognition systems French). To select the current language, ) button. To press the PHONE/SEND ( select a different language, tilt the tuning switch ( or ) left or right. NOTE: You must press the button within 5 seconds to change the language. 5. If you decide not to change the language, do not press either button. After 5 seconds, the Voice Recognition session will end, and the language will not be changed. Connecting procedure NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. Main Menu A “Connect phone” 䊊 B “Add phone” 䊊 C Initiate from handset 䊊 D Name phone 䊊 1. Press the button on the steering wheel. The system announces the available commands. A . The system ac2. Say: “Connect phone” 䊊 knowledges the command and announces the next set of available commands. B . The system acknowl3. Say: “Add phone” 䊊 edges the command and asks you to initiate C. connecting from the phone handset 䊊 The connecting procedure of the cellular phone varies according to each cellular phone model. For additional information, refer to the cellular phone Owner’s Manual. You can also visit www.NissanUSA.com/bluetooth for instructions on connecting NISSAN recommended cellular phones. When prompted for a PIN, enter “1234” from the handset. The PIN “1234” has been assigned by NISSAN and cannot be changed. 4. The system asks you to say a name for the D. phone 䊊 If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if more than one phone is connected and the name sounds too much like a name already used, the system tells you, then prompts you for a name again. Making a call by entering a phone number Main Menu A “Call” 䊊 B “Phone Number” 䊊 C Speak the digits 䊊 D “Dial” 䊊 1. Press the button on the steering wheel. A tone will sound. A . The system acknowledges 2. Say: “Call” 䊊 the command and announces the next set of available commands. B . The system ac3. Say “Phone Number” 䊊 knowledges the command and announces the next set of available commands. 4. Say the number you wish to call starting with C . If the the area code in single digit format 䊊 system has trouble recognizing the correct phone number, try entering the number in the following groups: 3-digit area code, 3-digit prefix and the last 4-digits. For example, 555-121-3354 can be said as “five Monitor, climate, audio, phone and voice recognition systems 4-59 five five” as the 1st group, then “one two one” as the 2nd group, and “three three five four” as the 3rd group. For dialing more than 10 digits or any special characters, say “Special Number”. For additional information, refer to “How to say numbers” in this section. 5. When you have finished speaking the phone number, the system repeats it back and announces the available commands. D . The system acknowledges 6. Say: “Dial” 䊊 the command and makes the call. For additional command options, refer to “List of voice commands” in this section. Receiving a call When you hear the ring tone, press the button on the steering wheel. button Once the call has ended, press the on the steering wheel. NOTE: If you do not wish to take the call when you button hear the ring tone, press the on the steering wheel. For additional information, refer to “List of voice commands” in this section. LIST OF VOICE COMMANDS Main Menu “Call” “Call” Main Menu “Call” “Phonebook” A (Speak name) 䊊 “Recent Calls” “Phone Number” “Connect Phone” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu. Remember to wait for the tone before speaking. After the main menu, you can say “Help” to hear the list of commands currently available any time the system is waiting for a response. If you want to end an action without completing it, you can say “Cancel” or “Quit” at any time the system is waiting for a response. The system will end the Voice Recognition session. Whenever the Voice Recognition session is cancelled, a double beep is played to indicate you have exited the system. If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a response. 4-60 Monitor, climate, audio, phone and voice recognition systems B (Speak Digits) 䊊 C “Special Number” 䊊 D “Redial” 䊊 E “Call Back” 䊊 A (Speak name) 䊊 If you have stored entries in the phonebook, you can dial a number associated with a name. For additional information, refer to “Phonebook (phones without automatic phonebook download function)” in this section to learn how to store entries. When prompted by the system, say the name of the phone book entry you wish to call. The system acknowledges the name. If there are multiple numbers associated with the name, the system asks you to choose the correct number. Once you have confirmed the name and location, the system begins the call. B (Speak Digits) 䊊 When prompted by the system, say the number you wish to call. For additional information, refer to “How to say numbers” and “Making a call by entering a phone number” in this section. C “Special Number” 䊊 For dialing more than 10 digits or any special characters, say “Special Number”. When the system acknowledges the command, the system will prompt you to speak the number. D “Redial” 䊊 Use the Redial command to call the last number that was dialed. The system acknowledges the command, repeats the number and begins dialing. If a redial number does not exist, the system announces, “There is no number to redial” and ends the Voice Recognition session. E “Call Back” 䊊 Use the Call Back command to dial the number of the last incoming call within the vehicle. The system acknowledges the command, repeats the number and begins dialing. If a call back number does not exist, the system announces, “There is no number to call back” and ends the Voice Recognition session. During a call During a call there are several command options button on the steering available. Press the wheel to mute the receiving voice and enter commands. ● “Help” — The system announces the available commands. ● “Cancel/Quit” — The system announces “Cancel,” ends the Voice Recognition session and returns to the call. ● “Send” — Use the Send command to enter numbers, “*” or “#” during a call. For example, if you were directed to dial an extension by an automated system: Say: “Send one two three four.” ● “Transfer call” — Use the Transfer Call command to transfer the call from the Bluetooth® Hands-Free Phone System to the cellular phone when privacy is desired. The system announces, “Transfer call. Call transferred to privacy mode.” The system then ends the Voice Recognition session. To reconnect the call from the cellular phone to the Bluetooth® Hands-Free System, button. press the ● “Mute” — Use the Mute command to mute your voice so the other party cannot hear it. Use the mute command again to unmute your voice. NOTE: If a call is ended or the cellular phone network connection is lost while the Mute feature is on, the Mute feature will be reset to “off” for the next call so the other party can hear your voice. The system acknowledges the command and sends the tones associated with the numbers. The system then ends the Voice Recognition session and returns to the call. Say “star” for “*”, Say “pound” for “#”. Monitor, climate, audio, phone and voice recognition systems 4-61 “Phonebook” (phones without automatic phonebook download function) A “Transfer Entry” 䊊 Use the Transfer Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry. NOTE: The “Transfer Entry” command is not available when the vehicle is moving. Main Menu “Phonebook” A “Transfer Entry” 䊊 “Delete Entry” 䊊 B C “List Names” 䊊 For phones that do not support automatic download of the phonebook (PBAP Bluetooth® profile), the “Phonebook” command is used to manually add entries to the vehicle phonebook. The phonebook stores up to 40 names for each phone connected to the system. NOTE: Each phone has its own separate phonebook. You cannot access Phone A’s phonebook if you are currently connected with Phone B. For example, say: “Mary.” If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if the name sounds too much like a name already stored, the system tells you, then prompts you for a name again. The system will ask you to transfer a phone number stored in the cellular phone’s memory. Enter a phone number by voice command: For example, say: “five five five one two one two.” For additional information, refer to “How to say numbers” in this section. To transfer a phone number stored in the cellular phone’s memory: Say “Transfer entry.” The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via the Bluetooth® communication link. 4-62 Monitor, climate, audio, phone and voice recognition systems The transfer procedure varies according to each cellular phone. For additional information, refer to the cellular phone Owner’s Manual. The system repeats the number and prompts you for the next command. When you have finished entering numbers or transferring an entry, choose “Store.” The system confirms the name, location and number. B “Delete Entry” 䊊 Use the Delete Entry command to erase one entry from the phonebook. After the system recognizes the command, speak the name to delete or say “List Names” to choose an entry. C “List Names” 䊊 Use the List Names command to hear all the names in the phonebook. The system recites the phonebook entries but does not include the actual phone numbers. When the playback of the list is complete, the system goes back to the main menu. You can stop the playback of the list at any time button on the steering by pressing the wheel. The system ends the Voice Recognition session. “Phonebook” (phones with automatic phonebook download function) difficulty recognizing. For additional information, refer to “Record name” in this section. an entry with multiple numbers. Up to 40 voice tags can be recorded to the system. NOTE: NOTE: “Recent Calls” The “Transfer Entry” command is not available when the vehicle is moving. Each phone has its own separate phonebook. You cannot access Phone A’s phonebook if you are currently connected with Phone B. Main Menu “Phonebook” Say a Name A “List Names” 䊊 B “Record Name” 䊊 For phones that support automatic download of the phonebook (PBAP Bluetooth® profile), the “Phonebook” command is used to manage entries in the vehicle phonebook. You can say the name of an entry at this menu to initiate dialing of that entry. The phonebook stores up to 1,000 names for each phone connected to the system. When a phone is connected to the system, the phonebook is automatically downloaded to the vehicle. This feature allows you to access your phonebook from the Bluetooth® system and call contacts by name. You can record a custom voice tag for contact names that the system has A “List Names” 䊊 Use the List Names command to hear all the names and locations in the phone book. The system recites the phone book entries but does not include the actual phone numbers. When the playback of the list is complete, the system goes back to the main menu. You can stop the playback of the list at any time button on the steering by pressing the wheel. The system ends the Voice Recognition session. For additional information, refer to “Record name” in this section for information about recording custom voice tags for list entries that the system has difficulty pronouncing. B “Record Name” 䊊 The system allows you to record custom voice tags for contact names in the phonebook that the vehicle has difficulty recognizing. This feature can also be used to record voice tags to directly dial Main Menu “Recent Calls” A “Outgoing” 䊊 B “Incoming” 䊊 C “Missed” 䊊 Use the Recent Calls command to access outgoing, incoming or missed calls. A “Outgoing” 䊊 Use the Outgoing command to list the outgoing calls made from the vehicle. B “Incoming” 䊊 Use the Incoming command to list the incoming calls made to the vehicle. C “Missed” 䊊 Use the Missed command to list the calls made to the vehicle that were not answered. Monitor, climate, audio, phone and voice recognition systems 4-63 tem will list the names assigned to each phone and then prompt you for the phone you wish to select. Only one phone can be active at a time. “Connect Phone” NOTE: The Add Phone command is not available when the vehicle is moving. Main Menu “Connect Phone” A “Add Phone” 䊊 B “Select Phone” 䊊 C “Delete Phone” 䊊 “Replace Phone” 䊊 D E “Bluetooth OFF” 䊊 F “Phonebook Download OFF” 䊊 G “Display Settings” 䊊 Use the Connect Phone commands to manage the phones connecting to the vehicle or to enable the Bluetooth® function on the vehicle. C “Delete Phone” 䊊 Use the Delete Phone command to delete a phone that is connected to the vehicle. The system will list the names assigned to each phone and then prompt you for the phone you wish to delete. Deleting a phone from the vehicle will also delete the phonebook for that phone. D “Replace Phone” 䊊 Use the Display Settings command to control where incoming call notifications are displayed in the vehicle. Say “Driver Only” to have call notifications shown on the vehicle information display only. Say “Both” to have call notifications shown on both the vehicle information display and the center audio display. To turn the feature back on, say “Phonebook Download”. When the command is recognized, “Sync Contacts ON” will appear on the audio display. E “Bluetooth OFF” 䊊 VOICE ADAPTATION (VA) MODE Use the Bluetooth OFF command to prevent a wireless connection to your phone. Voice Adaptation allows up to two out-of-dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each connected phone. F “Phonebook Download OFF” 䊊 Use the Add Phone command to add a phone to the vehicle. For additional information, refer to “Connecting procedure” in this section. Use the Phonebook Download OFF command to turn off the automatic downloading of the handset phonebook to the available (if supported by the cellular phone). When the command is recognized, “Sync Contacts OFF” will appear on the audio display. Use the Select Phone command to select from a list of phones connected to the vehicle. The sys- G “Display Settings” 䊊 Use the Replace Phone command to replace an existing phone pairing with a new phone. The system will keep all voice tags assigned to your phonebook. A “Add Phone” 䊊 B “Select Phone” 䊊 To turn the feature back on, say “Phonebook Download”. When the command is recognized, “Sync Contacts ON” will appear on the audio display. 4-64 Monitor, climate, audio, phone and voice recognition systems Training procedure The procedure for training a voice is as follows. 1. Position the vehicle in a reasonably quiet outdoor location. 2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in P (Park). 3. Press and hold the than 5 seconds. button for more 4. The system announces: “Press the ) button for the PHONE/SEND ( hands-free phone system to enter the voice adaptation mode or press the PHONE/END ) button to select a different lan( guage.” 5. Press the button. For additional information on selecting a different language, refer to “Choosing a language” in this section. 6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions provided by the system. 7. When preparation is complete and you are button. ready to begin, press the ● transfer entry 8. The VA mode will be explained. Follow the instructions provided by the system. ● delete all entries 9. When training is finished, the system will tell you an adequate number of phrases are recorded. ● phonebook delete entry 10. The system will announce that voice adaptation has been completed and the system is ready. The VA mode will stop if: button is pressed for more than ● The 5 seconds in VA mode. ● The vehicle begins moving during VA mode. ● The ignition switch is placed in the OFF or LOCK position. Training phrases During the VA mode, the system instructs the trainer to say the following phrases. The system will prompt you for each phrase. ● phonebook transfer entry ● dial three oh four two nine ● delete call back number ● incoming ● eight pause nine three two pause seven ● call seven two four zero nine ● next entry ● dial star two one seven oh ● yes ● no ● select ● missed ● dial eight five six nine two ● Bluetooth on ● outgoing ● call three one nine oh two ● nine seven pause pause three oh eight ● cancel ● call back number ● call star two zero nine five ● delete phone Monitor, climate, audio, phone and voice recognition systems 4-65 ● dial eight three zero five one MANUAL CONTROL ● record name While using the voice recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. This can be especially helpful if the noise of driving makes it difficult for the voice recognition system to accurately interpret commands. The manual control mode does not allow dialing a phone number by digits. The user may select an entry from the Phonebook or Recent Calls lists. To re-activate voice recognition, exit the manual control mode by pressing and holding ) button. At that time, the PHONE/END ( pressing the PHONE/SEND ( ) button will start the Hands Free Phone System. ● four three pause two nine pause zero ● delete redial number ● phonebook list names ● call eight oh five four one ● correction ● connect phone ● dial seven four oh one eight ● previous entry ● delete ● dial nine seven two six six ● call seven six three oh one ● go back ● call five six two eight zero ● dial six six four three seven Operating tips ● To enter manual control mode, start the voice recognition system and tilt the tuning ) switch up or down. The sys( tem will speak ⬙Showing Manual Options⬙ when manual controls are initially activated. 4-66 Monitor, climate, audio, phone and voice recognition systems ● To browse the menu options, tilt the tuning ) switch up or down. The sys( tem will always speak the current menu option. Depending on the audio display, it will also show the current menu option. ● To select the current menu option, press the ) button. PHONE/SEND ( ● To go back to the previous menu, press the ) button. If the current PHONE/END ( menu is the Main Menu, pressing the ) button will exit the PHONE/END ( Phone system. ● To exit the manual control mode, press and ) button for hold the PHONE/END ( 5 seconds. TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom System fails to interpret the command correctly. The system consistently selects the wrong entry from the phone book. Solution 1. Ensure that the command is valid. For additional information, refer to “List of voice commands” in this section. 2. Ensure that the command is spoken after the tone. 3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle. 4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized. 5. If more than one command was said at a time, try saying the commands separately. 6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. For additional information, refer to “Voice Adaptation (VA) mode” in this section. 1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the “List Names” command. For additional information, refer to “Phonebook” in this section. 2. Replace one of the names being confused with a new name. Monitor, climate, audio, phone and voice recognition systems 4-67 BLUETOOTH® HANDS-FREE PHONE SYSTEM WITH NAVIGATION SYSTEM (if so equipped) WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle. CAUTION To avoid discharging the vehicle battery, use a phone after starting the engine. LHA3089 Your NISSAN is equipped with the Bluetooth® Hands-Free Phone System. If you have a compatible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology, you can 4-68 Monitor, climate, audio, phone and voice recognition systems make or receive a hands-free telephone call with your cellular phone in the vehicle. Once your cellular phone is connected to the in-vehicle phone module, no other phone connecting procedure is required. Your phone is automatically reconnected with the in-vehicle phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. You can register up to five different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN Voice Recognition system supports the phone commands, so dialing a phone number using your voice is possible. For additional information. refer to “NISSAN Voice Recognition System” in this section. Before using the Bluetooth® Hands-Free Phone System, refer to the following notes. ● Set up the wireless connection between a cellular phone and the in-vehicle phone module before using the hands-free phone system. ● Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module. Please visit www.nissanusa.com/bluetooth for a recommended phone list and connecting. ● You will not be able to use a hands-free phone under the following conditions: – Your vehicle is outside of the cellular service area. – Your vehicle is in an area where it is difficult to receive cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area. – Your cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice during a call. ● Immediately after the ignition switch is placed in the ON position, it may be impossible to receive a call for a short period of time. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption. ● While a cellular phone is connected through the Bluetooth® wireless connection, the battery power of the cellular phone may discharge quicker than usual. The Bluetooth® Hands-Free Phone System cannot charge cellular phones. ● If the hands-free phone system seems to be malfunctioning, refer to “Troubleshooting guide” in this section. You can also visit www.nissanusa.com/bluetooth for troubleshooting help. ● Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise. ● Refer to the cellular phone owner’s manual regarding the telephone charges, cellular phone antenna and body, etc. ● The signal strength display on the monitor will not coincide with the signal strength display of some cellular phones. REGULATORY INFORMATION FCC Regulatory information – CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. – Operation is subject to the following two conditions: 1. This device may not cause interference and Monitor, climate, audio, phone and voice recognition systems 4-69 2. this device must accept any interference, including interference that may cause undesired operation of the device. IC Regulatory information – Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. – This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations. BLUETOOTH® is a trademark owned by Bluetooth SIG, Inc. and licensed to Bosch. VOICE COMMANDS You can use voice commands to operate various Bluetooth® Hands-Free Phone System features using the NISSAN Voice Recognition system. For additional information, refer to “NISSAN Voice Recognition System” in this section. Voice Prompt Interrupt While using the voice recognition system, the system voice can be interrupted to allow the user to speak commands. While the system is speakbutton on the steering ing, press the wheel. The system voice will stop and a tone will be heard. After the tone, speak desired command (displayed on the touch-screen). One Shot Call To use the system faster, you may speak the second level commands with the main menu command on the main menu. For example, press button and after the tone say, “Call the Redial”. LHA2773 CONNECTING PROCEDURE NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Press the [ panel. ] button on the control 2. Touch the “Settings” key. 3. Touch the “Phone & Bluetooth” key. 4. Touch the “Connect New Device” key. 4-70 Monitor, climate, audio, phone and voice recognition systems 5. Initiate the connecting process from the handset. The system will display the message: “Is PIN XXXXXX displayed on your Bluetooth device?”. If the PIN is displayed on your Bluetooth® device, select “Yes” to complete the pairing process. For additional information, refer to Bluetooth® device’s Owner’s Manual. the VEHICLE PHONEBOOK To access the vehicle phonebook: 1. Press the button on the control panel. 2. Touch the “Phonebook” key. 3. Choose the desired entry from the displayed list. 4. The number of the entry will be displayed on the screen. Touch the number to initiate dialing. MAKING A CALL To reject the incoming call, either: To make a call, follow the procedure below: 1. Press the button on the control panel. The “Phone” screen will appear on the display. 2. Select one of the following options to make a call: ● “Phonebook”: Select the name from an entry stored in the vehicle phonebook. ● “Call Lists”: Select the name from the incoming, outgoing or missed. ● “Redial”: Dial the last outgoing call from the vehicle. ”: Input the phone number manually ● “ using a keypad displayed on the screen. For additional information on how to use the touch-screen, refer to “How to use the touch-screen” in this section. NOTE: RECEIVING A CALL To scroll quickly through the list, touch the “A-Z” key in the upper right corner of the screen. Turn the TUNE knob to choose a letter or number and then press ENTER. The list will move to the first entry that begins with that number or letter. When a call is placed to the connected phone, the display will change to phone mode. ● Press the wheel, or button on the steering ● Touch the red phone icon on the screen. DURING A CALL While a call is active, the following options are available on the screen: ● “Handset” Select this option to switch control of the phone call over to the handset. ● “Mute Mic.” Select this option to mute the microphone. Select again to unmute the microphone. ) icon ● Red phone ( Select to end the phone call. ENDING A CALL To end a phone call, select the red phone ( ) icon on the screen or press the button on the steering wheel. To accept the incoming call, either: ● Press the wheel, or button on the steering ● Touch the green phone icon on the screen. Monitor, climate, audio, phone and voice recognition systems 4-71 TEXT MESSAGING WARNING ● Laws in some jurisdictions may restrict the use of “Text-to-Speech.” Check local regulations before using the feature. ● Laws in some jurisdictions may restrict the use of some of the applications and features, such as social networking and texting. Check local regulations for any requirements. ● Use the text messaging feature after stopping your vehicle in a safe location. If you have to use the feature while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while using the text messaging feature, pull off the road to a safe location and stop your vehicle. The system allows for the sending and receiving of text messages through the vehicle interface. Sending a text message: 1. Press the wheel. button on the steering 2. Say “Phone” after the tone. ● “Okay” 3. Say “Send Text” after the tone. ● “Yes” 4. The system will provide a list of available commands in order to determine the recipient of the text message. Choose from the following: ● “No” ● To (a name) ● Enter Number ● Missed Calls ● Incoming Calls ● Outgoing Calls For additional information about these options, refer to “Voice commands” in this section. 5. Once a recipient is chosen, the system prompts for which message to send. Nine predefined messages are available as well as three custom messages. To choose one of the predefined messages, speak one of the following after the tone: ● “Driving, can’t text” ● “Call me” ● “On my way” ● “Running late” 4-72 Monitor, climate, audio, phone and voice recognition systems ● “Where are you?” ● “When?” To send one of the custom messages, say “Custom Messages”. If more than one custom message is stored, the system will prompt for the number of the desired custom message. For additional information on setting and managing custom text messages, refer to “Bluetooth® settings” in this section. Reading a received text message: 1. Press the wheel. button on the steering 2. Say “Phone” after the tone. 3. Say “Read Text” after the tone. The text message, sender and delivery time are shown on the screen. Use the tuning switch to scroll through all text messages if more than one button to exit the are available. Press the text message screen. Press the button to access the following options for replying to the text message: ● Call Back Speak this command to call the sender of the text message using the Bluetooth® Hands-Free Phone System. BLUETOOTH® SETTINGS To access the phone settings: 1. Press the [ ● Send Text Speak this command to send a text message response to the sender of the text message. ] button. 2. Touch the “Settings” key. 3. Touch the “Phone & Bluetooth” key. ● Read Text Speak this command to read the text message again. ● Previous Text Speak this command to move to the previous text message (if available). ● Next Text Speak this command to move to the next text message (if available). LHA2844 NOTE: Text messages are only displayed if the vehicle speed is less than 5 mph (8 km/h). Menu Item Phone Settings Connect New Device Select Connected Device Replace Connected Device Delete Connected Device Bluetooth Result For additional information, refer to “Phone settings” in this section. Touch to connect a new Bluetooth® device to the Bluetooth® Hands-Free Phone System. Touch to choose a Bluetooth® device from a list of those devices connected to the Bluetooth® Hands-Free Phone System. Touch to replace a Bluetooth® device from a list of those devices connected to the Bluetooth® Hands-Free Phone System. Touch to delete a Bluetooth® device from a list of those devices connected to the Bluetooth® Hands-Free Phone System. Touch to toggle Bluetooth® on and off. Monitor, climate, audio, phone and voice recognition systems 4-73 PHONE SETTINGS To access the phone settings: 1. Press the [ ] button. 2. Touch the “Settings” key. 3. Touch the “Phone & Bluetooth” key. 4. Touch the “Phone Settings” key and adjust the following settings as desired: ● Sort Phonebook By: Touch “First Name” or “Last Name” to choose how phonebook entries are alphabetically displayed on the screen. ● Use Phonebook From: Touch “Handset” to use the phone’s phonebook. Select “SIM” to use the phonebook on the SIM card. Touch “Both” to use both sources. ● Download Phonebook Now: Touch to download the phonebook to the vehicle from the chosen source. ● Phone Notifications for: Touch “Driver” to have phone notifications shown in the vehicle information display. Touch “Both” to have phone notifications shown in both the vehicle information display and the center display screen. ● Text Messaging: Touch to toggle the text message functionality on or off. ● Show Incoming Text for: Touch “Driver” to have incoming text notifications shown in the vehicle information display. Touch “Both” to have text notifications shown in both the vehicle information display and the center display screen. Touch “Off” to turn off all text notifications. ● Auto Reply: Touch to toggle the auto reply functionality on or off. ● Auto Reply Message: Touch to indicate preferred message to be sent when “Auto Reply” function is activated. ● Record Name for Phonebook Entry: Touch to record a name for a phonebook entry for use with the NISSAN Voice Recognition System. 4-74 Monitor, climate, audio, phone and voice recognition systems ● Use Vehicle’s Signature: Touch to toggle on or off the addition of the vehicle signature to outgoing messages. ● Custom Text Messages: Touch this option to select a custom message to edit. There are 4 customer message slots available. NISSAN VOICE RECOGNITION SYSTEM (if so equipped) The NISSAN Voice Recognition system allows hands-free operation of the systems equipped on this vehicle, such as the phone and navigation systems. 4. Voice and display feedback are provided when the command is accepted. ● If the command is not recognized, the system announces: “Command not recognized”. Repeat the command in a clear voice. To operate NISSAN Voice Recognition, press button located on the steering wheel. the When prompted, speak the command for the system you wish to activate. The command given is picked up by the microphone and performed when it is properly recognized. NISSAN Voice Recognition will provide a voice response and a message in the center display to inform you of the command results. ● If you want to cancel the command or go back to the previous menu of commands, button. The system will anpress the nounce: “Cancelling voice recognition” or “Go back” depending on the current menu level. USING THE SYSTEM Initialization When the ignition switch is in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If button is pressed before the initializathe tion completes, the system will announce: “Voice Recognition System not ready. Please wait.” LHA2087 Giving voice commands 1. Press the button. 2. The system announces: “Please say a category like phone or a command like points of interest followed by a brand name”. A list of available commands is then spoken by the system. 3. After the tone sounds and the face icon on the display changes, speak a command. Available commands are discussed in this section. ● Press the BACK button on the control panel to move back through the menus displayed on the screen. ● If you want to adjust the volume of the voice feedback, use the volume control switches on the steering wheel or the volume knob on the control panel. ● The voice command screen can also be accessed using the control panel display: 1. Press the [ ] button. 2. Select the “Voice Commands” key. Monitor, climate, audio, phone and voice recognition systems 4-75 For additional information on the navigation system, refer to the separate Navigation System Owner’s Manual. Operating tips To get the best performance out of NISSAN Voice Recognition, observe the following: How to say numbers ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands correctly. NISSAN Voice Recognition requires a certain way to speak numbers in voice commands. Refer to the following examples. General rule: Either “zero” or “oh” can be used for “0”. ● Wait until a tone sounds before speaking a command. Otherwise, the command will not be received properly. ● Start speaking a command within 3.5 seconds after the tone sounds. ● Speak in a natural voice without pausing between words. Phone numbers LHA2780 SYSTEM FEATURES NISSAN Voice Recognition can activate the following systems: ● Bluetooth® Hands-Free Phone System ● Navigation ● Audio ● Information ● My Apps ● Help 4-76 Monitor, climate, audio, phone and voice recognition systems Speak phone numbers according to the following example. For 1-800-662-6200, say dial number and then speak the phone number in any of the following formats: ● “one eight oh oh six six two six two oh oh” ● “one eight hundred six six two six two oh oh” ● “one eight zero zero six six two six two oh oh” For the best voice recognition phone dialing results, say phone numbers as single digits. Also, full numbers can only be spoken for “800”. For example, you cannot say 555-6000 as “five five five six thousand”. BLUETOOTH® HANDS-FREE PHONE SYSTEM VOICE COMMANDS To access the Bluetooth® Hands-Free Phone System voice commands: 1. Press the button. 2. Say “Call” and then a name in the vehicle phonebook to call that entry. Otherwise, say “Phone” to access various phone commands. If the Bluetooth® has been set to “Off”, the system announces: “Bluetooth® is off. Would you like to turn Bluetooth® on?” If no phone is connected to the system and the vehicle is stationary, the system announces: “There is no phone connected. Would you like to connect a phone now?” Say “Yes” to connect a phone. All further Bluetooth® Hands-Free Phone System voice commands are only available if a phone is connected. If a phone is connected and Bluetooth® is set to “On”, the following voice commands are available: ● Call (a name) Speak the name of the contact in which you are trying to call. System will confirm correct contact. Say “Dial” to initiate dialing. ● Dial Number ● Read Text Allows for up to 24 digits to be dialed. After the number is entered, say “Dial” to initiate dialing. Say “Correction” to correct the number entered. Say “Go Back” to return to the main menu. ● List Phonebook Starting with the first alphabetical entry in the vehicle phonebook, the system prompts for an additional command. Say “Dial” to call the number of the phonebook entry. Say “Send Text” to send a text message to the number of the phonebook entry. Say “Next Entry” to skip to the next alphabetical entry in the vehicle phonebook, where the same options will then be available. ● Recent Calls The system prompts for an additional command. Say “Missed Calls”, “Incoming Calls” or “Outgoing Calls” to display a list of such calls on the screen. Speak the number of the entry displayed on the screen to dial that number or say “Next Page” to view entries on the next page (if available). Reads an incoming text message. For additional information about text messaging with the Bluetooth® Hands-Free Phone System, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section. ● Send Text Sends a text message. For additional information about text messaging with the Bluetooth® Hands-Free Phone System, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section. ● Select Phone The system replies “Please use manual controls to continue”. Use manual controls to change the active phone from among the listed phones connected to the vehicle. For additional information about the Bluetooth® Hands-Free Phone System, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section. ● Redial Redials the last called number. Monitor, climate, audio, phone and voice recognition systems 4-77 NAVIGATION SYSTEM VOICE COMMANDS The following voice commands are available for the Navigation System: ● Street Address (address) ● Points of Interest (name) ● POI by Category ● Home ● Address Book ● Previous Destinations ● Enter Address in Steps ● Cancel Route For additional information, refer to the separate Navigation System Owner’s Manual. ● Tune AM (number) Allows user to tune directly to a desired AM frequency ● Tune FM (number) Allows user to tune directly to a desired FM frequency ● SXM channel (number) Allows user to tune directly to a desired SXM station (if so equipped) ● CD Track (number) Allows user to select track to be played ● Play Song (name) Allows user to select song name to be played AUDIO SYSTEM VOICE COMMANDS ● Play Artist (name) To access the audio system voice commands: 1. Press the button. 2. Say “Audio” 3. Speak a command from the following available commands: ● Play Album (name) Allows user to select artist to be played Allows user to select album name to be played For additional information, refer to “Audio system” in this section. ● Play (AM, FM, etc.) Allows user to select radio band 4-78 Monitor, climate, audio, phone and voice recognition systems INFORMATION VOICE COMMANDS The following voice commands are available for the information functions of the Navigation System: ● Traffic ● Fuel Prices ● Stocks ● Movie Listings ● Current Weather ● Weather Map ● 5 — day Forecast ● 6 — hour Forecast For additional information, refer to the Navigation System Owner’s Manual. MY APPS VOICE COMMANDS Many Apps can be accessed using this voice command. For additional information, refer to “NissanConnectSM Mobile Apps” in this section. HELP VOICE COMMANDS TROUBLESHOOTING GUIDE The following voice commands can be spoken to have the system provide instructions and tips for using the NISSAN Voice Recognition system. The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. ● List Commands ● What Can I Say? ● General Help ● Quit ● Exit Symptom/error message The system responds “Command Not Recognized” or the system fails to recognize the command correctly. Solution 1. Ensure that the command format is valid. Use the “List Commands” or “What Can I Say?” command under the “Help” menu. 2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level. 3. Ensure that the ambient noise level is not excessive (for example, with the windows open or the defroster on). NOTE: If it is too noisy to use the phone, it is likely that voice commands will not be recognized. 4. If optional words of the command have been omitted, then the command should be tried with these in place. Monitor, climate, audio, phone and voice recognition systems 4-79 MEMO 4-80 Monitor, climate, audio, phone and voice recognition systems 5 Starting and driving Precautions when starting and driving. . . . . . . . . . . . . . . . 5-2 Exhaust gas (carbon monoxide) . . . . . . . . . . . . . . . . . . 5-2 Three-way catalyst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Tire Pressure Monitoring System (TPMS). . . . . . . . . . 5-3 Avoiding collision and rollover . . . . . . . . . . . . . . . . . . . . 5-5 Off-road recovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Rapid air pressure loss . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Drinking alcohol/drugs and driving. . . . . . . . . . . . . . . . 5-7 Ignition switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Continuously Variable Transmission (CVT) . . . . . . . . . 5-8 Ignition switch positions . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 NISSAN vehicle immobilizer system . . . . . . . . . . . . . . 5-8 Before starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Driving the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Engine protection mode . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Continuously Variable Transmission (CVT) . . . . . . . . 5-11 Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15 Cruise control (if so equipped) . . . . . . . . . . . . . . . . . . . . . 5-16 Precautions on cruise control . . . . . . . . . . . . . . . . . . . 5-16 Cruise control operations. . . . . . . . . . . . . . . . . . . . . . . 5-16 Break-in schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17 Fuel efficient driving tips. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18 Increasing fuel economy. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19 Parking/parking on hills. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20 Power steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21 Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21 Brake precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21 Anti-lock Braking System (ABS). . . . . . . . . . . . . . . . . 5-22 Vehicle Dynamic Control (VDC) system . . . . . . . . . . . . . 5-23 Brake force distribution . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Rear sonar system (RSS) (if so equipped) . . . . . . . . . . . 5-26 Cold weather driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Freeing a frozen door lock . . . . . . . . . . . . . . . . . . . . . . 5-27 Antifreeze. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Draining of coolant water . . . . . . . . . . . . . . . . . . . . . . . 5-27 Tire equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Special winter equipment. . . . . . . . . . . . . . . . . . . . . . . 5-27 Driving on snow or ice . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 PRECAUTIONS WHEN STARTING AND DRIVING WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals. ● Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. EXHAUST GAS (carbon monoxide) WARNING ● Do not breathe exhaust gases; they contain colorless and odorless carbon monoxide. Carbon monoxide is dangerous. It can cause unconsciousness or death. 5-2 Starting and driving ● If you suspect that exhaust fumes are entering the vehicle, drive with all windows fully open, and have the vehicle inspected immediately. ● Do not run the engine in closed spaces such as a garage. ● Do not park the vehicle with the engine running for any extended length of time. ● Keep the rear vent windows, liftgates, doors and trunk lids (if so equipped) closed while driving, otherwise exhaust gases could be drawn into the passenger compartment. If you must drive with one of these open, follow these precautions: 1. Open all the windows. 2. Turn the air recirculation mode off and set the fan speed control to the highest level to circulate the air. ● The exhaust system and body should be inspected by a qualified mechanic whenever: a. The vehicle is raised for service. b. You suspect that exhaust fumes are entering into the passenger compartment. c. You notice a change in the sound of the exhaust system. d. You have had an accident involving damage to the exhaust system, underbody, or rear of the vehicle. THREE-WAY CATALYST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants. WARNING ● The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable materials away from the exhaust system components. ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously reduce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do not keep driving if the engine misfires, or if noticeable loss of performance or other unusual operating conditions are detected. Have the vehicle inspected promptly by a NISSAN dealer. ● Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, damaging the three-way catalyst. ● Do not race the engine while warming it up. ● Do not push or tow your vehicle to start the engine. TIRE PRESSURE MONITORING SYSTEM (TPMS) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire infla- tion pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with TPMS that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check all four tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the mal- function exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. Additional information: ● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 mph (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving). ● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted for all four tires. After all your tires are inflated to the recommended pressure, the vehicle must be driven at speeds above 16 mph (25 km/h) to activate the TPMS and turn off the low tire pressure warning light. Use a tire pressure gauge to check the tire pressure. Starting and driving 5-3 ● The CHECK TIRE PRES (pressure) warning message is displayed in the odometer when the low tire pressure warning light is illuminated and low tire pressure is detected. The CHECK TIRE PRES warning message turns off when the low tire pressure warning light turns off. ● The low tire pressure warning light remains illuminated until the tires are inflated to the recommended COLD tire pressure. The CHECK TIRE PRES warning message is displayed each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. Check tire pressure warning message “reset button⬙ in the ⬙Instruments and controls⬙ section. ● The CHECK TIRE PRES warning message is not displayed if the low tire pressure warning light illuminates to indicate a TPMS malfunction. 5-4 Starting and driving ● Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the outside temperature. Low outside temperature can lower the temperature of the air inside the tire which can cause a lower tire inflation pressure. This may cause the low tire pressure warning light to illuminate. If the warning light illuminates, check the tire pressure for all four tires. ● The Tire and Loading Information label (also referred to as the vehicle placard or tire inflation pressure label) is located in the driver’s door opening. For additional information, refer to “Low tire pressure warning light” in the “Instruments and controls” section and “Tire Pressure Monitoring System (TPMS)” in the “In case of emergency” section of this manual. WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use. ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with underinflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF. If you have a flat tire, replace it with a spare tire as soon as possible. For additional information, refer to “Flat tire” in the “In case of emergency” section of this manual for changing a flat tire. ● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CAUTION Do not place metalized film or any metal parts (antenna, etc.) on the windows. This may cause poor reception of the signals from the tire pressure sensors, and the TPMS will not function properly. Some devices and transmitters may temporarily interfere with the operation of the TPMS and cause the low tire pressure warning light to illuminate. Some examples are: – Facilities or electric devices using similar radio frequencies are near the vehicle. – If a transmitter set to similar frequencies is being used in or near the vehicle. – If a computer (or similar equipment) or a DC/AC converter is being used in or near the vehicle. FCC Notice For USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. AVOIDING COLLISION AND ROLLOVER WARNING Failure to operate this vehicle in a safe and prudent manner may result in loss of control or an accident. Be alert and drive defensively at all times. Obey all traffic regulations. Avoid excessive speed, high speed cornering, or sudden steering maneuvers, because these driving practices could cause you to lose control of your vehicle. As with any vehicle, loss of control could result in a collision with other vehicles or objects or cause the vehicle to roll over, particularly if the loss of control causes the vehicle to slide sideways. Be attentive at all times, and avoid driving when tired. Never drive when under the influence of alcohol or drugs (including prescription or overthe-counter drugs which may cause drowsiness). Always wear your seat belt as outlined in the “Safety – Seats, seat belts and supplemental restraint system” section of this manual, and also instruct your passengers to do so. Starting and driving 5-5 Seat belts help reduce the risk of injury in collisions and rollovers. In a rollover crash, an unbelted or improperly belted person is significantly more likely to be injured or killed than a person properly wearing a seat belt. OFF-ROAD RECOVERY While driving, the right side or left side wheels may unintentionally leave the road surface. If this occurs, maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the conditions of the vehicle, road and traffic. 1. Remain calm and do not overreact. 2. Do not apply the brakes. 3. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 4. When appropriate, slowly release the accelerator pedal to gradually slow the vehicle. 5. If there is nothing in the way, steer the vehicle to follow the road while vehicle speed is reduced. Do not attempt to drive the vehicle back onto the road surface until vehicle speed is reduced. 5-6 Starting and driving 6. When it is safe to do so, gradually turn the steering wheel until both tires return to the road surface. When all tires are on the road surface, steer the vehicle to stay in the appropriate driving lane. ● If you decide that it is not safe to return the vehicle to the road surface based on vehicle, road or traffic conditions, gradually slow the vehicle to a stop in a safe place off the road. RAPID AIR PRESSURE LOSS The vehicle must be driven as appropriate based on the conditions of the vehicle, road and traffic. WARNING The following actions can increase the chance of losing control of the vehicle if there is a sudden loss of tire air pressure. Losing control of the vehicle may cause a collision and result in personal injury. ● The vehicle generally moves or pulls in the direction of the flat tire. Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflated tires. ● Do not rapidly apply the brakes. Rapid air pressure loss can affect the handling and stability of the vehicle, especially at highway speeds. 1. Remain calm and do not overreact. Help prevent rapid air pressure loss by maintaining the correct air pressure and visually inspect the tires for wear and damage. For additional information, refer to “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. If a tire rapidly loses air pressure or “blows-out” while driving, maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. ● Do not rapidly release the accelerator pedal. ● Do not rapidly turn the steering wheel. 2. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 3. When appropriate, slowly release the accelerator pedal to gradually slow the vehicle. 4. Gradually steer the vehicle to a safe location off the road and away from traffic if possible. 5. Lightly apply the brake pedal to gradually stop the vehicle. IGNITION SWITCH 6. Turn on the hazard warning flashers and contact a roadside emergency service to change the tire. For additional information, refer to “Changing a flat tire” in the “In case of emergency” section of this manual. DRINKING ALCOHOL/DRUGS AND DRIVING WARNING Remember, drinking and driving don’t mix! That is true for drugs (over-the-counter, prescription) and illegal drugs too. Don’t drive if your ability to operate your vehicle is impaired by alcohol, drugs, or some other physical condition. WARNING ● Never remove the ignition key or place the ignition switch in the LOCK position while driving. The steering wheel will lock (for models with a steering lock mechanism). This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream reduces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others. Additionally, if you are injured in an accident, alcohol can increase the severity of the injury. NISSAN is committed to safe driving. However, you must choose not to drive under the influence of alcohol. Every year thousands of people are injured or killed in alcohol-related collisions. Although the local laws vary on what is considered to be legally intoxicated, the fact is that alcohol affects all people differently and most people underestimate the effects of alcohol. Starting and driving 5-7 When the ignition switch cannot be placed to the LOCK position: 1. Shift the shift lever to the P (Park) position. ON: Normal operating position (3) 2. Move the ignition switch slightly in the ON direction. This position turns on the ignition system and the electrical accessories. 3. Turn the ignition switch to the LOCK position. START: (4) 4. Remove the key if it is inserted in the ignition switch. SSD0392 CONTINUOUSLY VARIABLE TRANSMISSION (CVT) The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift lever is moved to the P (Park) position. If the ignition switch is placed to the LOCK position, the shift lever cannot be moved from the P (Park) position. The shift lever can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. 1 between the There is an OFF position 䊊 LOCK and ACC positions. The OFF position is indicated by a “1” on the key cylinder. ● When placing the ignition switch in the LOCK position, make sure that the shift lever is in the P (Park) position IGNITION SWITCH POSITIONS ● When removing the key from the ignition switch (if it is inserted), make sure that the shift lever is in the P (Park) position. OFF: (1) LOCK: Normal parking position (0) The engine can be turned off without locking the steering wheel. ACC: (Accessories) (2) 5-8 Starting and driving This position activates electrical accessories such as the radio when the engine is not running. This position starts the engine. As soon as the engine has started, release the key. It automatically returns to the ON position. NISSAN VEHICLE IMMOBILIZER SYSTEM The NISSAN Vehicle Immobilizer system will not allow the engine to start without the use of the registered key. If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following procedure: 1. Leave the ignition switch in the ON position for approximately 5 seconds. 2. Place the ignition switch in the OFF or LOCK position, and wait approximately 10 seconds. BEFORE STARTING THE ENGINE 3. Repeat Steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key. If the no start condition re-occurs, NISSAN recommends placing the registered key on a separate key ring to avoid interference from other devices. STARTING THE ENGINE ● Make sure the area around the vehicle is clear. ● Check fluid levels such as engine oil, coolant, brake fluid, and windshield-washer fluid as frequently as possible, or at least whenever you refuel. ● Check that all windows and lights are clean. ● Visually inspect tires for their appearance and condition. Also check tires for proper inflation. ● Check that all doors are closed. ● Position seat and restraints/headrests. adjust head ● Adjust inside and outside mirrors. ● Fasten seat belts and ask all passengers to do likewise. ● Check the operation of warning lights when the ignition switch is placed in the ON position. For additional information, refer to “Warning/indicator lights and audible reminders” in the “Instruments and controls” section of this manual. 1. Apply the parking brake. 2. Move the shift lever to P (Park) or N (Neutral). P (Park) is recommended. The shift lever cannot be moved out of P (Park) and into any of the other gear positions if the ignition switch is turned to the OFF position or if the key is removed from the ignition switch. The starter is designed not to operate if the shift lever is in any of the driving positions. 3. Crank the engine with your foot off the accelerator pedal by placing the ignition switch in the START position. Release the key when the engine starts. If the engine starts, but fails to run, repeat the above procedure. ● If the engine is very hard to start in extremely cold weather or when restarting, depress the accelerator pedal a little (approximately 1/3 to the floor) and hold it and then crank the engine. Release the key and the accelerator pedal when the engine starts. Starting and driving 5-9 DRIVING THE VEHICLE ● If the engine is very hard to start because it is flooded, depress the accelerator pedal all the way to the floor and hold it. Crank the engine for 5–6 seconds. After cranking the engine, release the accelerator pedal. Crank the engine with your foot off the accelerator pedal by turning the ignition key to START. Release the key when the engine starts. If the engine starts, but fails to run, repeat the above procedure. CAUTION Do not operate the starter for more than 15 seconds at a time. If the engine does not start, turn the key off and wait 10 seconds before cranking again, otherwise the starter could be damaged. 4. Allow the engine to idle for at least 30 seconds after starting. Do not race the engine while warming it up. Drive at moderate speed for a short distance first, especially in cold weather. In cold weather, keep the engine running for a minimum of 2–3 minutes before shutting it off. Starting and stopping the engine over a short period of time may make the vehicle more difficult to start. 5-10 Starting and driving NOTE: ENGINE PROTECTION MODE Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: The engine has an engine protection mode to reduce the chance of damage if the coolant temperature becomes too high (for example, when climbing steep grades in high temperature with heavy loads, such as when towing a trailer). When the engine temperature reaches a certain level: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone chargers, GPS, DVD players, etc.) 2. Vehicle is not driven regularly and/or only driven short distances. In these cases, the battery may need to be charged to maintain battery health. ● The engine coolant temperature gauge will move toward the H position. ● Engine power may be reduced. ● The air conditioning cooling function may be automatically turned OFF for a short time (the blower will continue to operate). Engine power and, under some conditions, vehicle speed will decrease. Vehicle speed can be controlled with the accelerator pedal, but the vehicle may not accelerate at the desired speed. The transmission will downshift or upshift as it reaches prescribed shift points. You can also shift manually. As driving conditions change and engine coolant temperature is reduced, vehicle speed can be increased using the accelerator pedal, and air conditioning cooling function will automatically be turned back ON. If: 1. The engine coolant temperature is not reduced. 2. The air conditioning cooling function does not turn back ON. 3. The engine oil pressure low/engine coolant illumitemperature high warning light nates, this may indicate a malfunction. Move the vehicle off the road in a safe area and allow the engine to cool. If after checking the remains on, do not oil and coolant, the continue to drive and call a NISSAN dealer. The malfunction indicator light (MIL) may also come ON. If only it remains on, you do not need to have your vehicle towed, but have it inspected soon by a NISSAN dealer. For additional information, refer to “Malfunction indicator light (MIL)” in the “Instruments and controls ” section of this manual. WARNING Overheating can result in reduced engine power and vehicle speed. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If the vehicle cannot maintain a safe driving speed, pull to the side of the road in a safe area. Allow the engine to cool and return to normal operation. For additional information, refer to “If your vehicle overheats” in the “In case of emergency” section of this manual. CAUTION Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by warranty. Turn off the engine as soon as it is safe to do so. CONTINUOUSLY VARIABLE TRANSMISSION (CVT) WARNING ● Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Reverse), D (Drive) or L (Low). Always depress the brake pedal until shifting is completed. Failure to do so could cause you to lose control and have an accident. ● Cold engine idle speed is high, so use caution when shifting into a forward or reverse gear before the engine has warmed up. ● Do not downshift abruptly on slippery roads. This may cause a loss of control. ● Never shift to P (Park) or R (Reverse) while the vehicle is moving. This could cause an accident. ● Except in an emergency, do not shift to the N (Neutral) position while driving. Coasting with the transmission in the N (Neutral) position may cause serious damage to the transmission. Starting and driving 5-11 CAUTION When stopping the vehicle on an uphill grade, do not hold the vehicle by depressing the accelerator pedal. The foot brake should be used for this purpose. The CVT in your vehicle is electronically controlled to produce maximum power and smooth operation. The recommended operating procedures for this transmission are shown on the following pages. Follow these procedures for maximum vehicle performance and driving enjoyment. 3. Release the foot brake, then gradually start the vehicle in motion. 4. Stop the vehicle completely before moving the shift lever into the P (Park) position. The CVT is designed so the foot brake pedal MUST be depressed before shifting from P (Park) to any drive position while the ignition switch is in the ON position. The shift lever cannot be moved out of P (Park) and into any of the other gear positions if the ignition switch is placed in the LOCK, OFF or ACC position or if the key is removed. LSD2139 NOTE: Shifting Engine power may be automatically reduced to protect the CVT if the engine speed increases quickly when driving on slippery roads or while being tested on some dynamometers. After starting the engine, fully depress the brake pedal and move the shift lever from P (Park) to any of the desired shift positions. Starting the vehicle Apply the parking brake if the shift lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. 1. After starting the engine, fully depress the foot brake pedal before moving the shift lever out of the P (Park) position. 2. Keep the foot brake pedal depressed and move the shift lever into a driving gear. 5-12 Starting and driving WARNING If the ignition switch is placed in the OFF or ACC position for any reason while the vehicle is in N (Neutral), or any drive position, the key cannot be turned to the LOCK position and be removed from the ignition switch. If this occurs, perform the following steps: 1. Apply the parking brake when the vehicle is stopped. 2. Move the shift lever to P (Park) to park the vehicle and place the ignition switch in the LOCK position to remove the key. P (Park) CAUTION To prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the P (Park) shift lever position when the vehicle is parked or when starting the engine. Make sure the vehicle is completely stopped. The brake pedal must be depressed and the shift lever button pushed in to move the shift lever from N (Neutral) or any drive position to P (Park). Apply the parking brake. When parking on a hill, apply the parking brake first, then place the shift lever into the P (Park) position. R (Reverse) L (Low) CAUTION To prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use this position for engine braking on steep downhill gradients/climbing steep slopes and whenever approaching sharp bends. Do not use the L (Low) position in any other circumstances. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position. R (Reverse) speed is limited to 30 MPH (48 km/h). Do not exceed 30 MPH (48 km/h) in the R (Reverse) position. The brake pedal must be depressed and the shift lever button pushed in to move the shift lever from P (Park), N (Neutral) or any drive position to R (Reverse). N (Neutral) Neither forward nor reverse gear is engaged. The engine can be started in this position. You may shift to N (Neutral) and restart a stalled engine while the vehicle is moving. D (Drive) Use this position for all normal forward driving. Starting and driving 5-13 4. Push down the shift lock release using a suitable tool. 5. Push the shift lever button and move the shift lever to the N (Neutral) position while holding down the shift lock release. Place the ignition switch in the ON position to unlock the steering wheel. The vehicle may be moved to the desired location. Replace the removed shift lock release cover after the operation. LSD2141 If the shift lever cannot be moved out of the P (Park) position, have a NISSAN dealer check the CVT system as soon as possible. LSD2140 Shift lock release Overdrive (O/D) OFF switch If the battery is discharged, the shift lever may not be moved from the P (Park) position even with the foot brake pedal depressed. When the O/D OFF switch is pushed with the shift lever in the D (Drive) position, the light in the instrument panel illuminates. For additional information, refer to “Overdrive off indicator light (CVT models)” in the “Instruments and controls” section of this manual. Use the Overdrive off mode when you need improved engine braking. To move the shift lever, perform the following procedure: 1. Place the ignition switch to the LOCK position and remove the key. 2. Apply the parking brake. 3. Remove the shift lock release cover using a suitable tool. 5-14 Starting and driving To turn off the Overdrive off mode, push the O/D indicator light will OFF switch again. The turn off. PARKING BRAKE Each time the engine is started, or when the shift lever is shifted to any position other than D (Drive), the Overdrive off mode will be automatically turned off. it does not return to its normal operating condition, have a NISSAN dealer check the transmission and repair if necessary. Accelerator downshift — in D position — When the high fluid temperature protection mode or fail-safe operation occurs, vehicle speed may be gradually reduced. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If necessary, pull to the side of the road at a safe place and allow the transmission to return to normal operation, or have it repaired if necessary. For passing or hill climbing, depress the accelerator pedal to the floor. This shifts the transmission down into a lower gear, depending on the vehicle speed. Fail-safe When the fail-safe operation occurs, the CVT will not be shifted into the selected driving position. WARNING WARNING ● Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident. ● Do not release the parking brake from outside the vehicle. ● Do not use the shift lever in place of the parking brake. When parking, be sure the parking brake is fully engaged. ● Do not leave children unattended in a vehicle. They could release the parking brake and cause an accident. If the vehicle is driven under extreme conditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated. The MIL may come on to indicate the fail-safe mode is activated, refer to “Malfunction Indicator Light (MIL)” in the “Instruments and controls” section of this manual. This will occur even if all electrical circuits are functioning properly. In this case, place the ignition switch in the OFF position and wait for 10 seconds. Then place the ignition switch back in the ON position. The vehicle should return to its normal operating condition. If Starting and driving 5-15 CRUISE CONTROL (if so equipped) WARNING Do not use the cruise control when driving under the following conditions: ● When it is not possible to keep the vehicle at a set speed. ● In heavy traffic or in traffic that varies in speed. ● On winding or hilly roads. ● On slippery roads (rain, snow, ice, etc.). ● In very windy areas. LSD2142 To engage: Pull the lever up. To release: LSD2009 PRECAUTIONS ON CRUISE CONTROL 1. Firmly apply the parking brake. 1. ACCEL/RES switch 2. Move the shift lever to the P (Park) position. 2. COAST/SET switch 3. While pulling up on the parking brake lever slightly, push the button and lower completely. 3. CANCEL switch 4. Before driving, be sure the brake warning light goes out. ● If the cruise control system malfunctions, it cancels automatically. 4. CRUISE ON/OFF switch ● To properly set the cruise control system, use the following procedures. 5-16 Starting and driving Doing so could cause a loss of vehicle control and result in an accident. CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed between 30 - 89 MPH (48 - 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the ON•OFF switch. The CRUISE indicator light in the instrument panel comes on. To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. Take your foot off the accelerator pedal. Your vehicle maintains the set speed. BREAK-IN SCHEDULE ● To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle returns to the previously set speed. ● The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control. To cancel the preset speed, use one of the following three methods. ● Push the CANCEL button. ● Tap the brake pedal. ● Push the ON•OFF switch. The CRUISE indicator light in the instrument panel will go out. The cruise control is automatically canceled if: ● you depress the brake pedal while pushing the ACCEL/RES or SET/COAST switch. The preset speed is deleted from memory. ● the vehicle slows down more than 8 MPH (13 km/h) below the set speed. ● you move the shift lever to N (Neutral). To reset at a faster cruising speed, use one of the following three methods. ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. ● Push and hold the ACCEL/RES switch. When the vehicle attains the speed you desire, release the switch. ● Push and release the ACCEL/RES switch. Each time you do this, the set speed increases by about 1 MPH (1.6 km/h). To reset at a slower cruising speed, use one of the following three methods. ● Lightly tap the brake pedal. When the vehicle attains the desired speed, push the COAST/SET switch and release it. CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, either fast or slow, and do not run the engine over 4,000 rpm. ● Do not accelerate at full throttle in any gear. ● Avoid quick starts. ● Avoid hard braking as much as possible. ● Push and hold the COAST/SET switch. Release the switch when the vehicle slows to the desired speed. ● Push and release the COAST/SET switch. Each time you do this, the set speed decreases by about 1 MPH (1.6 km/h). To resume the preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 30 MPH (48 km/h). Starting and driving 5-17 FUEL EFFICIENT DRIVING TIPS Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. ● Above 40 MPH (64 km/h), it is more efficient to use A/C to cool the vehicle due to increased aerodynamic drag. 1. Use Smooth Accelerator and Brake Pedal Application ● Recirculating the cool air in the cabin when the A/C is on reduces cooling load. ● Avoid rapid starts and stops. ● Use smooth, gentle accelerator and brake application whenever possible. ● Maintain constant speed while commuting and coast whenever possible. 2. Maintain Constant Speed ● Look ahead to try and anticipate and minimize stops. ● Synchronizing your speed with traffic lights allows you to reduce your number of stops. ● Maintaining a steady speed can minimize red light stops and improve fuel efficiency. 3. Use Air Conditioning (A/C) at Higher Vehicle Speeds ● Below 40 MPH (64 km/h), it is more efficient to open windows to cool the vehicle due to reduced engine load. 5-18 Starting and driving 4. Drive at Economical Speeds and Distances ● Observing the speed limit and not exceeding 60 MPH (97 km/h) (where legally allowed) can improve fuel efficiency due to reduced aerodynamic drag. ● Maintaining a safe following distance behind other vehicles reduces unnecessary braking. ● Safely monitoring traffic to anticipate changes in speed permits reduced braking and smooth acceleration changes. ● Select a gear range suitable to road conditions. 5. Use Cruise Control ● Using cruise control during highway driving helps maintain a steady speed. ● Cruise control is particularly effective in providing fuel savings when driving on flat terrains. 6. Plan for the Shortest Route ● Utilize a map or navigation system to determine the best route to save time. 7. Avoid Idling ● Shutting off your engine when safe for stops exceeding 30–60 seconds saves fuel and reduces emissions. 8. Buy an Automated Pass for Toll Roads ● Automated passes permit drivers to use special lanes to maintain cruising speed through the toll and avoid stopping and starting. 9. Winter Warm Up ● Limit idling time to minimize impact to fuel economy. ● Vehicles typically need no more than 30 seconds of idling at start-up to effectively circulate the engine oil before driving. ● Your vehicle will reach its ideal operating temperature more quickly while driving versus idling. INCREASING FUEL ECONOMY 10. Keeping your Vehicle Cool ● Keep your engine tuned up. ● Park your vehicle in a covered parking area or in the shade whenever possible. ● Follow the recommended scheduled maintenance. ● When entering a hot vehicle, opening the windows will help to reduce the inside temperature faster, resulting in reduced demand on your A/C system. ● Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. ● Keep the wheels in correct alignment. Improper alignment increases tire wear and lowers fuel economy. ● Use the recommended viscosity engine oil. For additional information, refer to “Engine oil and oil filter recommendations” in the “Technical and consumer information” section of this manual. Starting and driving 5-19 PARKING/PARKING ON HILLS A ● HEADED DOWNHILL WITH CURB: 䊊 Turn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. B ● HEADED UPHILL WITH CURB: 䊊 Turn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb. ● HEADED UPHILL OR DOWNHILL, NO C CURB: 䊊 WSD0050 WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park). Failure to do so could cause the vehicle to move unexpectedly or roll away and result in an accident. Make sure the shift lever has been pushed as far forward as it can go and cannot be moved without depressing the foot brake pedal. 5-20 Starting and driving ● Never leave the engine running while the vehicle is unattended. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents. 1. Firmly apply the parking brake. 2. Move the shift lever to the P (Park) position. 3. To help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated. Turn the wheels toward the side of the road so the vehicle will move away from the center of the road if it moves. 4. Place the ignition switch in the LOCK position. POWER STEERING WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering. You will still have control of the vehicle, but the steering will be harder to operate. Have the power steering system checked by a NISSAN dealer. The power steering system is designed to provide power assist while driving to operate the steering wheel with light force. When the steering wheel is operated repeatedly or continuously while parking or driving at a very low speed, the power assist for the steering wheel will be reduced. This is to prevent overheating of the power steering system and protect it from getting damaged. While the power assist is reduced, steering wheel operation will become heavy. When the temperature of the power steering system goes down, the power assist level will return to normal. Avoid repeating such steering wheel operations that could cause the power steering system to overheat. BRAKE SYSTEM You may hear a sound when the steering wheel is operated quickly. However, this is not a malfunction. The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. If the electric power steering warning light PS illuminates while the engine is running, it may indicate the power steering system is not functioning properly and may need servicing. Have the power steering system checked by a NISSAN dealer. BRAKE PRECAUTIONS When the electric power steering warning light illuminates with the engine running, there will be no power assist for the steering, but you will still have control of the vehicle. At this time, greater steering effort is required to operate the steering wheel, especially in sharp turns and at low speeds. For additional information refer to “Power steering warning light” in the “Instruments and controls” section of this manual. Vacuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal. However, greater foot pressure on the brake pedal will be required to stop the vehicle and stopping distance will be longer. Using the brakes Avoid resting your foot on the brake pedal while driving. This will overheat the brakes, wear out the brake pads faster, and reduce gas mileage. To help reduce brake wear and to prevent the brakes from overheating, reduce speed and downshift to a lower gear before going down a slope or long grade. Overheated brakes may reduce braking performance and could result in loss of vehicle control. Starting and driving 5-21 WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accelerating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. Wet brakes When the vehicle is washed or driven through water, the brakes may get wet. As a result, your braking distance will be longer and the vehicle may pull to one side during braking. To dry the brakes, drive the vehicle at a safe speed while lightly pressing the brake pedal to heat up the brakes. Do this until the brakes return to normal. Avoid driving the vehicle at high speeds until the brakes function correctly. Parking brake break-in Break-in the brake shoes whenever the effect of the parking brake is weakened or whenever the brake shoes and/or drums are replaced, in order to assure the best brake performance. 5-22 Starting and driving This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer. ANTI-LOCK BRAKING SYSTEM (ABS) WARNING ● The ABS is a sophisticated device, but it cannot prevent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on slippery surfaces. Remember that stopping distances on slippery surfaces will be longer than on normal surfaces even with ABS. Stopping distances may also be longer on rough, gravel or snow covered roads, or if you are using tire chains. Always maintain a safe distance from the vehicle in front of you. Ultimately, the driver is responsible for safety. ● Tire type and condition may also affect braking effectiveness. – When replacing tires, install the specified size of tires on all four wheels. – When installing a spare tire, make sure that it is the proper size and type as specified on the Tire and Loading Information label. For additional information, refer to the ”Tire and loading information label” in the “Technical and consumer information” section of this manual. – For additional information, refer to “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. The Anti-lock Braking System (ABS) controls the brakes so the wheels do not lock during hard braking or when braking on slippery surfaces. The system detects the rotation speed at each wheel and varies the brake fluid pressure to prevent each wheel from locking and sliding. By preventing each wheel from locking, the system helps the driver maintain steering control and helps to minimize swerving and spinning on slippery surfaces. Using the system Depress the brake pedal and hold it down. Depress the brake pedal with firm steady pressure, but do not pump the brakes. The ABS will operate to prevent the wheels from locking up. Steer the vehicle to avoid obstacles. VEHICLE DYNAMIC CONTROL (VDC) SYSTEM WARNING Normal operation Do not pump the brake pedal. Doing so may result in increased stopping distances. The ABS operates at speeds above 3 - 6 MPH (5 - 10 km/h). The speed varies according to road conditions. Self-test feature When the ABS senses that one or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly. You may feel a pulsation in the brake pedal and hear a noise from under the hood or feel a vibration from the actuator when it is operating. This is normal and indicates that the ABS is operating properly. However, the pulsation may indicate that road conditions are hazardous and extra care is required while driving. The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or reverse. When the self-test occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and does not indicate a malfunction. If the computer senses a malfunction, it switches the ABS off and illuminates the ABS warning light on the instrument panel. The brake system then operates normally but without anti-lock assistance. If the ABS warning light illuminates during the self-test or while driving, have the vehicle checked by a NISSAN dealer. The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions: ● Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle. ● Controls brake pressure and engine output to reduce drive wheel slip based on vehicle speed (traction control function). ● Controls brake pressure at individual wheels and engine output to help the driver maintain control of the vehicle in the following conditions: – understeer (vehicle tends to not follow the steered path despite increased steering input) – oversteer (vehicle tends to spin due to certain road or driving conditions) The VDC system can help the driver to maintain control of the vehicle, but it cannot prevent loss of vehicle control in all driving situations. Starting and driving 5-23 When the VDC system operates, the indicator in the instrument panel flashes to note the following: ● The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path. ● You may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and indicates that the VDC system is working properly. ● Adjust your speed and driving to the road conditions. For additional information, refer to “Slip indicator light” and ”Vehicle Dynamic Control (VDC) off indicator light” in the ”Instruments and controls” section of this manual. If a malfunction occurs in the system, the indicator light comes on in the instrument panel. The VDC system automatically turns off when the indicator light is off. The VDC OFF switch is used to turn off the VDC indicator illuminates to indisystem. The cate the VDC system is off. When the VDC switch is used to turn off the system, the VDC system still operates to prevent one drive wheel from slipping by transferring power to a non slipping drive wheel. The 5-24 Starting and driving indicator flashes if this occurs. All other VDC indicator will not functions are off and the flash. The VDC system is automatically reset to ON when the ignition switch is placed in the OFF position then back to the ON position. The computer has a built in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in reverse at a slow speed. When the self-test occurs, you may hear a clunk noise and/or feel a pulsation in the brake pedal. This is normal and is not an indication of a malfunction. WARNING ● The VDC system is designed to help the driver maintain stability but does not prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques. Reduce vehicle speed and be especially careful when driving and cornering on slippery surfaces and always drive carefully. ● Do not modify the vehicle’s suspension. If suspension parts such as shock absorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly. This could adversely affect vehicle handling perindicator may formance, and the flash or the indicator light may illuminate. ● If brake related parts such as brake pads, rotors and calipers are not NISSAN recommended or are extremely deteriorated, the VDC system may not indicaoperate properly and the tor light may illuminate. ● If engine control related parts are not NISSAN recommended or are extremely indicator light deteriorated, the may illuminate. ● When driving on extremely inclined surfaces such as higher banked corners, the VDC system may not operate propindicator may flash or erly and the the indicator light may illuminate. Do not drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or indicator may flash or ramp, the the indicator light may illuminate. This is not a malfunction. Restart the engine after driving onto a stable surface. ● If wheels or tires other than the NISSAN recommended ones are used, the VDC system may not operate properly and indicator may flash or the the indicator light may illuminate. ● The VDC system is not a substitute for winter tires or tire chains on a snow covered road. BRAKE FORCE DISTRIBUTION During braking while driving through turns, the system optimizes the distribution of force to each of the 4 wheels depending on the radius of the turn. WARNING ● The VDC system is designed to help the driver maintain controllability but cannot prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques. Reduce vehicle speed and be especially careful when driving and cornering on slippery surfaces and always drive carefully. ● The active trace control and brake force distribution systems may not be effective depending on the driving condition. Always drive carefully and attentively. ● Do not modify the vehicle’s suspension. If suspension parts such as shock absorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly. This could adversely affect vehicle handling performance, and the VDC warning light may illuminate. ● If brake related parts such as brake pads, rotors and calipers are not NISSAN recommended or are extremely deteriorated, the VDC system may not operate properly and the VDC warning light may illuminate. ● If engine control related parts are not NISSAN recommended or are extremely deteriorated, the VDC warning light may illuminate. ● When driving on extremely inclined surfaces such as higher banked corners, the VDC system may not operate properly and the VDC warning light may illuminate. Do not drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the VDC warning light may illuminate. This is not a malfunction. Restart the engine after driving onto a stable surface. ● If wheels or tires other than the NISSAN recommended ones are used, the VDC system may not operate properly and the VDC warning light may illuminate. ● The VDC system is not a substitute for winter tires or tire chains on a snow covered road. Starting and driving 5-25 REAR SONAR SYSTEM (RSS) (if so equipped) ● The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground. ● If your vehicle sustains damage to the rear bumper fascia, leaving it misaligned or bent, the sensing zone may be altered causing inaccurate measurement of obstacles or false alarms. LSD0095 WARNING ● Always turn and look back before backing up. The RSS is not a substitute for proper backing procedures. ● Read and understand the limitations of the rear sonar system as contained in this section. Inclement weather may affect the function of the RSS; this may include reduced performance or a false activation. ● This system is not designed to prevent contact with small or moving objects. 5-26 Starting and driving The RSS sounds a tone to warn the driver of obstacles near the rear bumper when the shift lever is in R (Reverse). The system may not detect objects at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The RSS detects obstacles up to 5.9 ft (1.8 m) from the rear bumper with a decreased coverage area at the outer corners of the bumper, (refer to the illustration for approximate zone coverage areas). As you move closer to the obstacle, the rate of the tone increases. When the obstacle is less than 10 in (25.0 cm) away, the tone will sound continuously. If the RSS detects a stationary or receding object further than 10 in. (25.0 cm) from the side of the vehicle, the tone will sound for only 3 seconds. Once the system detects an object approaching, the tone will sound again. The RSS automatically turns on when the shift lever is placed in R (Reverse) and the ignition switch is placed in the ON position. The RSS OFF switch on the instrument panel allows the driver to turn the RSS on and off. To turn the RSS off, the ignition switch must be placed in the ON position. An indicator light on the switch will illuminate when the system is turned off. If the indicator light illuminates when the RSS is not turned off, it may indicate a malfunction in the RSS. Keep the RSS sensors (located on the rear bumper fascia) free from snow, ice and large accumulations of dirt (do not clean the sensors with sharp objects). If the sensors are covered, it will affect the accuracy of the RSS. COLD WEATHER DRIVING FREEING A FROZEN DOOR LOCK To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry key fob. ANTIFREEZE In the winter when it is anticipated that the temperature will drop below 32°F (0°C), check the antifreeze to assure proper winter protection. For additional information, refer to “Engine cooling system” in the “Maintenance and do-it-yourself” section of this manual. BATTERY If the battery is not fully charged during extremely cold weather conditions, the battery fluid may freeze and damage the battery. To maintain maximum efficiency, the battery should be checked regularly. For additional information, refer to “Battery” in the “Maintenance and do-it-yourself” section of this manual. DRAINING OF COOLANT WATER If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For additional information, refer to “Changing engine coolant” in the “Maintenance and do-ityourself” section of this manual. TIRE EQUIPMENT 1. SUMMER tires have a tread designed to provide superior performance on dry pavement. However, the performance of these tires will be substantially reduced in snowy and icy conditions. If you operate your vehicle on snowy or icy roads, NISSAN recommends the use of MUD & SNOW or ALL SEASON TIRES on all four wheels. Please consult a NISSAN dealer for the tire type, size, speed rating and availability information. 2. For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. 3. Tire chains may be used. For additional information, refer to “Tire chains” in the “Maintenance and do-it-yourself” section of this manual. SPECIAL WINTER EQUIPMENT It is recommended that the following items be carried in the vehicle during winter: ● A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. ● A sturdy, flat board to be placed under the jack to give it firm support. ● A shovel to dig the vehicle out of snowdrifts. ● Extra washer fluid to refill the windshieldwasher fluid reservoir. DRIVING ON SNOW OR ICE WARNING ● Wet ice (32°F, 0°C and freezing rain), very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or “grip” under these conditions. Try to avoid driving on wet ice until the road is salted or sanded. ● Whatever the condition, drive with caution. Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction. Starting and driving 5-27 ● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement. ● Allow greater following distances on slippery roads. ● Watch for slippery spots (glare ice). These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reaching it. Try not to brake while on the ice, and avoid any sudden steering maneuvers. ● Do not use the cruise control (if so equipped) on slippery roads. ● Snow can trap dangerous exhaust gases under your vehicle. Keep snow clear of the exhaust pipe and from around your vehicle. 5-28 Starting and driving 6 In case of emergency Hazard warning flasher switch . . . . . . . . . . . . . . . . . . . . . . 6-2 Flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Tire Pressure Monitoring System (TPMS). . . . . . . . . . 6-2 Changing a flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 Push starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11 If your vehicle overheats . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11 Towing your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12 Towing recommended by NISSAN . . . . . . . . . . . . . . 6-13 Vehicle recovery (freeing a stuck vehicle) . . . . . . . . . 6-14 HAZARD WARNING FLASHER SWITCH FLAT TIRE The flashers will operate with the ignition switch placed in any position. Some jurisdictions may prohibit the use of the hazard warning flasher switch while driving. LIC0394 Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic. ● Turn signals do not work when the hazard warning flasher lights are on. 6-2 In case of emergency TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with TPMS. It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit, and the CHECK TIRE PRES (pressure) warning appears in the odometer, one or more of your tires is significantly under-inflated. If the vehicle is being driven with low tire pressure, the TPMS will activate and warn you of it by the low tire pressure warning light. This system will activate only when the vehicle is driven at speeds above 16 mph (25 km/h). For additional information, refer to “Warning/indicator lights and audible reminders” in the “Instruments and controls” section, and “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” section of this manual. WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with underinflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF. If you have a flat tire, replace it with a spare tire as soon as possible. ● When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CHANGING A FLAT TIRE If you have a flat tire, follow the instructions below: WARNING ● Make sure the parking brake is securely applied and the CVT is shifted into P (Park). ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle. Wait for professional road assistance. Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers. 3. Park on a level surface and apply the parking brake. Move the shift lever to P (Park). 4. Turn off the engine. 5. Raise the hood to warn other traffic and to signal professional road assistance personnel that you need assistance. 6. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle. In case of emergency 6-3 LCE2142 LDI2198 A. Blocks Getting the spare tire and tools B. Flat tire Remove the jack and necessary tools from under the passenger seat by performing the following steps: Blocking wheels Place suitable blocks at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury. 6-4 In case of emergency LCE2077 1. Adjust the passenger seat rearward 6. Release the belt strap to remove the tool bag. Reverse steps 1 - 6 to install and secure the jack and tool bag. LCE2078 2. Remove the tray under the passenger seat. LCE2079 3. Loosen the jack screw counterclockwise. 3 䊊 4 4. Lift jack up. 䊊 5 5. Pull jack forward. 䊊 In case of emergency 6-5 9. Stop turning the bolt when the spare is 2 lowered to the point where the tire basket䊊 3 . can be removed from the hook䊊 10. Remove the wheel basket by pushing the basket upward. 11. Lower the tire basket to the ground and take out the spare. Spare wheel basket bolt tightening torque: 20 ft-lb (27 N-m) SCE0630 Removing wheel cover (if so equipped) CAUTION LDI2199 7. Open the back door. 1 counterclockwise ap8. Loosen the bolt 䊊 proximately 40 turns to lower the spare. Be careful not to excessively loosen the bolt because the basket may fall abruptly. 6-6 In case of emergency Do not use your hands to pry off wheel caps or wheel covers. Doing so could result in personal injury. 1 To remove the wheel cover, use the jack rod 䊊 as illustrated. 2 between the wheel and jack rod to Apply cloth 䊊 prevent damaging the wheel and wheel cover. Use caution not to scratch the wheel cover or wheel surface. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is necessary to work under the vehicle, support it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle. Do not use the jack provided with your vehicle on other vehicles. The jack is designed for lifting only your vehicle during a tire change. ● Use the correct jack-up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while the vehicle is on the jack. It may cause the vehicle to move. Always refer to the illustration for the correct placement and jack-up points for your specific vehicle model and jack type. Carefully read the caution label attached to the jack body and the following instructions. 1. Loosen each wheel nut 1 or 2 turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. LCE2061 2. Place the jack directly under the jack-up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. The jack-up points are indicated by stamped arrows on the side of the frame. The jack should be used on firm and level ground. ● Do not allow passengers to stay in the vehicle while it is on the jack. ● Never run the engine with a wheel(s) off the ground. It may cause the vehicle to move. In case of emergency 6-7 LCE2059 WCE0056 3. Install the assembled jack rod into the jack as shown. Installing the spare tire 4. To lift the vehicle, securely hold the jack lever and rod. Carefully raise the vehicle until the tire clears the ground. The spare tire is designed for emergency use. For additional information, refer to “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. 4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely A,䊊 B,䊊 C,䊊 D, in the sequence illustrated (䊊 E ). Lower the vehicle completely. 䊊 5. Remove the wheel nuts and then remove the tire. 1. Clean any mud or dirt from the surface between the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger tight. 3. With the wheel nut wrench, tighten wheel A, nuts alternately and evenly as illustrated (䊊 B,䊊 C,䊊 D,䊊 E ) until they are tight. 䊊 6-8 In case of emergency WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. This could cause an accident. ● Do not use oil or grease on the wheel studs or nuts. This could cause the nuts to become loose. JUMP STARTING ● Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 83 ft-lb (113 N·m) The wheel nuts must be kept tightened to specification at all times. It is recommended that wheel nuts be tightened to specifications at each lubrication interval. Adjust tire pressure to the COLD pressure. COLD pressure: After vehicle has been parked for 3 hours or more or driven less than 1 mile (1.6 km). COLD tire pressures are shown on the Tire and Loading Information label affixed to the driver side center pillar. After adjusting tire pressure to the COLD tire pressure, the display (if so equipped) of the tire pressure information may show higher pressure than the COLD tire pressure after the vehicle has been driven more than 1 mile (1.6 km). This is because the tire pressure increases as the tire temperature rises. This does not indicate a system malfunction. 5. Securely store the flat tire and jacking equipment in the vehicle. WARNING ● Always make sure that the spare tire and jacking equipment are properly secured after use. Such items can become dangerous projectiles in an accident or sudden stop. ● The spare tire is designed for emergency use. Refer to specific instructions under the heading “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. To start your engine with a booster battery, the instructions and precautions below must be followed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always present in the vicinity of the battery. Keep all sparks and flames away from the battery. ● Do not allow battery fluid to come into contact with eyes, skin, clothing or painted surfaces. Battery fluid is a corrosive sulfuric acid solution which can cause severe burns. If the fluid should come into contact with anything, immediately flush the contacted area with water. ● Keep battery out of the reach of children. ● The booster battery must be rated at 12 volts. Use of an improperly rated battery can damage your vehicle. In case of emergency 6-9 ● Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. ● Do not attempt to jump start a frozen battery. It could explode and cause serious injury. WCE0054 WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their batteries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift lever to P (Park). Switch off all unnecessary electrical systems (lights, heater, air conditioner, etc.). 6-10 In case of emergency 3. Ensure the vent caps are level and tight. 4. Connect jumper cables in the sequence ilA,䊊 B,䊊 C,䊊 D ). lustrated (䊊 CAUTION ● Always connect positive (⫹) to positive (⫹) and negative (⫺) to body ground (for example, strut mounting bolt, engine lift bracket, etc.) — not to the battery. ● Make sure the jumper cables do not touch moving parts in the engine compartment and that the cable clamps do not contact any other metal. PUSH STARTING 5. Start the engine of the booster vehicle and let it run for a few minutes. 6. Keep the engine speed of the booster vehicle at about 2,000 rpm, and start the engine of the vehicle being jump started. CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, turn the key off and wait 3 to 4 seconds before trying again. 7. After starting the engine, carefully disconnect the negative cable and then the positive cable. CAUTION ● Do not push start this vehicle. The three-way catalyst may be damaged. ● Continuously Variable Transmission (CVT) models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. IF YOUR VEHICLE OVERHEATS WARNING ● Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. ● To avoid the danger of being scalded, never remove the radiator or coolant reservoir cap while the engine is still hot. When the radiator or coolant reservoir cap is removed, pressurized hot water will spurt out, possibly causing serious injury. ● Do not open the hood if steam is coming out. ● Overheating can result in reduced engine power and vehicle speed. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If the vehicle cannot maintain a safe driving speed, pull to the side of the road in a safe area. Allow the engine to cool and return to normal operation. In case of emergency 6-11 TOWING YOUR VEHICLE If your vehicle is overheating (indicated by an extremely high temperature gauge reading and the illumination of the engine oil pressure/engine coolant temperature high indicator light), or if you feel a lack of engine power, detect abnormal noise, etc., take the following steps. 1. Move the vehicle safely off the road, apply the parking brake and move the shift lever to P (Park). Do not stop the engine. 2. Turn off the air conditioner. Open all the windows, move the heater or air conditioner temperature control to maximum hot and fan control to high speed. 3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. If steam or coolant is escaping, turn off the engine. Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood. WARNING If steam or water is coming from the engine, stand clear to prevent getting burned. 6-12 In case of emergency 5. Visually check drive belts for damage or looseness. Also check if the cooling fan is running. The radiator hoses and radiator should not leak water. If coolant is leaking, the water pump belt is missing or loose, or the cooling fan does not run, stop the engine. WARNING Be careful not to allow your hands, hair, jewelry or clothing to come into contact with, or get caught in, engine belts or the engine cooling fan. The engine cooling fan can start at any time. 6. After the engine cools down, check the coolant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary. Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all jurisdictional and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. Towing instructions are available from a NISSAN dealer. Local service operators are generally familiar with the applicable laws and procedures for towing. To assure proper towing and to prevent accidental damage to your vehicle, NISSAN recommends having a service operator tow your vehicle. It is advisable to have the service operator carefully read the following precautions: WARNING ● Never ride in a vehicle that is being towed. ● Never get under your vehicle after it has been lifted by a tow truck. CAUTION ● When towing, make sure that the transmission, axles, steering system and powertrain are in working condition. If any of these conditions apply, dollies or a flatbed tow truck must be used. ● Always attach safety chains before towing. For additional information about towing your vehicle behind a recreational vehicle (RV), refer to “Flat towing” in the “Technical and Consumer Information” section of this manual. LCE2162 TOWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. In case of emergency 6-13 CAUTION ● Never tow Continuously Variable Transmission (CVT) models with the front wheels on the ground or four wheels on the ground (forward or backward), as this may cause serious and expensive damage to the transmission. If it is necessary to tow the vehicle with the rear wheels raised always use towing dollies under the front wheels. ● When towing Continuously Variable Transmission (CVT) models with the front wheels on towing dollies: – Place the ignition switch in the OFF position, and secure the steering wheel in a straight-ahead position with a rope or similar device. – Move the shift lever to the N (Neutral) position. ● When towing Continuously Variable Transmission (CVT) models with the rear wheels on the ground (if you do not use towing dollies): Always release the parking brake. 6-14 In case of emergency LCE2075 VEHICLE RECOVERY (freeing a stuck vehicle) Pulling a stuck vehicle WARNING To avoid vehicle damage, serious personal injury or death when recovering a stuck vehicle: ● Contact a professional towing service to recover the vehicle if you have any questions regarding the recovery procedure. ● Attach recovery devices only to main structural members of the vehicle or the recovery hooks. ● Do not use the vehicle tie-downs to tow or free a stuck vehicle. ● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions. ● Always pull the recovery device straight out from the front of the vehicle. Never pull at an angle. ● Route recovery devices so they do not touch any part of the vehicle except the attachment point. If your vehicle is stuck in sand, snow, mud, etc., use a tow strap or other device designed specifically for vehicle recovery. Always follow the manufacturer’s instructions for the recovery device. Do not use the tie-down hooks for towing or vehicle recovery. Rocking a stuck vehicle WARNING ● Stand clear of a stuck vehicle. ● Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. 3. Turn the steering wheel right and left to clear an area around the front tires. 4. Slowly rock the vehicle forward and backward. ● Shift back and forth between R (Reverse) and D (Drive). ● Apply the accelerator as little as possible to maintain the rocking motion. ● Release the accelerator pedal before shifting between R (Reverse) and D (Drive). ● Do not spin the tires above 34 mph (55 km/h). 5. If the vehicle cannot be freed after a few tries, contact a professional towing service to remove the vehicle. If your vehicle is stuck in sand, snow, mud, etc., use the following procedure: 1. Turn off the Vehicle Dynamic Control System (VDC). 2. Make sure the area in front and behind the vehicle is clear of obstructions. In case of emergency 6-15 MEMO 6-16 In case of emergency 7 Appearance and care Cleaning exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Removing spots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Underbody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Chrome parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Tire dressings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Cleaning interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Air fresheners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Corrosion protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Most common factors contributing to vehicle corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Environmental factors influence the rate of corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Protect your vehicle from corrosion . . . . . . . . . . . . . . . 7-6 CLEANING EXTERIOR In order to maintain the appearance of your vehicle, it is important to take proper care of it. To protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain ● after driving on coastal roads ● when contaminants such as soot, bird droppings, tree sap, metal particles or bugs get on the paint surface ● when dust or mud builds up on the surface Whenever possible, store or park your vehicle inside a garage or in a covered area. When it is necessary to park outside, park in a shady area or protect the vehicle with a body cover. Be careful not to scratch the paint surface when putting on or removing the body cover. WASHING Wash dirt off with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, lukewarm (never hot) water. 7-2 Appearance and care CAUTION ● Do not use car washes that use acid in the detergent. Some car washes, especially brushless ones, use some acid for cleaning. The acid may react with some plastic vehicle components, causing them to crack. This could affect their appearance, and also could cause them not to function properly. Always check with your car wash to confirm that acid is not used. ● Do not wash the vehicle with strong household soap, strong chemical detergents, gasoline or solvents. ● Do not wash the vehicle in direct sunlight or while the vehicle body is hot, as the surface may become water-spotted. ● Avoid using tight-napped or rough cloths, such as washing mitts. Care must be taken when removing caked-on dirt or other foreign substances so the paint surface is not scratched or damaged. Rinse the vehicle thoroughly with plenty of clean water. Inside edges, seams and folds on the doors, hatches and hood are particularly vulnerable to the effects of road salt. Therefore, these areas must be cleaned regularly. Take care that the drain holes in the lower edge of the door are open. Spray water under the body and in the wheel wells to loosen the dirt and wash away road salt. A damp chamois can be used to dry the vehicle to avoid water spots. WAXING Regular waxing protects the paint surface and helps retain new vehicle appearance. Polishing is recommended to remove built-up wax residue and to avoid a weathered appearance before re-applying wax. A NISSAN dealer can assist you in choosing the proper product. ● Wax your vehicle only after a thorough washing. Follow the instructions supplied with the wax. ● Do not use a wax containing any abrasives, cutting compounds or cleaners that may damage the vehicle finish. Machine compounding or aggressive polishing on a base coat/clear coat paint finish may dull the finish or leave swirl marks. REMOVING SPOTS CAUTION Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. When cleaning the inside of the windows, do not use sharp-edged tools, abrasive cleaners or chlorine-based disinfectant cleaners. They could damage the electrical conductors, radio antenna elements or rear window defroster elements. UNDERBODY CHROME PARTS In areas where road salt is used in winter, it is necessary to clean the underbody regularly in order to prevent dirt and salt from building up and causing the acceleration of corrosion on the underbody and suspension. Before the winter period and again in the spring, the underseal must be checked and, if necessary, re-treated. Clean all chrome parts regularly with a nonabrasive chrome polish to maintain the finish. GLASS Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cloth will easily remove this film. ● Apply a light coat of tire dressing to help prevent it from entering the tire tread/grooves (where it would be difficult to remove). ● Wipe off excess tire dressing using a dry towel. Make sure the tire dressing is completely removed from the tire tread/grooves. ● Allow the tire dressing to dry as recommended by the tire dressing manufacturer. TIRE DRESSINGS NISSAN does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a compound. This compound may come off the tire while driving and stain the vehicle paint. If you choose to use a tire dressing, take the following precautions: ● Use a water-based tire dressing. The coating on the tire dissolves more easily than with an oil-based tire dressing. Appearance and care 7-3 CLEANING INTERIOR Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft brush. Wipe the vinyl surfaces with a clean, soft cloth dampened in mild soap solution, then wipe clean with a dry, soft cloth. Gently dab or tap soiled cloth areas with a moist, soft cloth. Before using any fabric protector, read the manufacturer’s recommendations. Some fabric protectors contain chemicals that may stain or bleach the seat material. Immediately clean spills on water repellent surfaces by wiping with soft, dry cloth. Use a cloth dampened only with water to clean the meter and gauge lens. CAUTION ● Never use benzine, thinner or any similar material. ● Never use fabric protectors unless recommended by the manufacturer. ● Do not use glass or plastic cleaner on meter or gauge lens covers. It may damage the lens cover. 7-4 Appearance and care AIR FRESHENERS Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions: ● Hanging-type air fresheners can cause permanent discoloration when they contact vehicle interior surfaces. Place the air freshener in a location that allows it to hang free and not contact an interior surface. ● Liquid-type air fresheners typically clip on the vents. These products can cause immediate damage and discoloration when spilled on interior surfaces. Carefully read and follow the manufacturer’s instructions before using the air fresheners. FLOOR MATS WARNING To avoid potential pedal interference that may result in a collision or injury: ● NEVER place a floor mat on top of another floor mat in the driver front position. ● Use only Genuine NISSAN floor mats specifically designed for use in your vehicle model. See your NISSAN dealer for additional information. ● Properly position the mats in the floorwell using the floor mat positioning aid. For additional information, refer to ⴖFloor mat positioning aidⴖ in this section. The use of Genuine NISSAN floor mats can extend the life of your vehicle vinyl flooring and make it easier to clean the interior. Mats should be maintained with regular cleaning and replaced if they become excessively worn. CORROSION PROTECTION SEAT BELTS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. For additional information, refer to “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemental restraint system” section of this manual. WARNING LAI2007 Floor mat positioning aid This vehicle includes two driver’s side front floor mat brackets and two passenger’s side front floor mat brackets to help keep your floor mats in place. Genuine NISSAN floor mats have been specially designed for your vehicle model. The driver’s and passenger’s side floor mats have two grommet holes incorporated in them. Position each mat by placing the floor mat bracket hook through the floor mat grommet holes while centering the mat in the floorwell. Periodically check to make certain the mats are properly positioned. Do not allow wet seat belts to roll up in the retractor. NEVER use bleach, dye or chemical solvents to clean the seat belts, since these materials may severely weaken the seat belt webbing. MOST COMMON FACTORS CONTRIBUTING TO VEHICLE CORROSION Most vehicle corrosion is caused by: ● the accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas ● damage to paint and other protective coatings caused by gravel and stone chips or minor traffic collisions ENVIRONMENTAL FACTORS INFLUENCE THE RATE OF CORROSION Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle and should be removed for drying to avoid floor panel corrosion. Relative humidity Corrosion will be accelerated in areas of high relative humidity, especially those areas where the temperatures stay above freezing and where atmospheric pollution exists and road salt is used. Appearance and care 7-5 Temperature CAUTION Air pollution ● NEVER remove dirt, sand or other debris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom. Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use accelerates the corrosion process. Road salt also accelerates the disintegration of paint surfaces. ● Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them. High temperatures accelerate the rate of corrosion to those parts which are not well ventilated. PROTECT YOUR VEHICLE FROM CORROSION ● Wash and wax your vehicle often to keep the vehicle clean. ● Always check for minor damage to the paint and repair it as soon as possible. ● Keep drain holes at the bottom of the doors open to avoid water accumulation. ● Check the underbody for accumulation of sand, dirt or salt. If present, wash with water as soon as possible. 7-6 Appearance and care Chemicals used for road surface de-icing are extremely corrosive. They accelerate corrosion and deterioration of underbody components such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders. In winter, the underbody must be cleaned periodically. For additional protection against rust and corrosion, which may be required in some areas, consult a NISSAN dealer. 8 Maintenance and do-it-yourself Maintenance requirements. . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 General maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Explanation of general maintenance items . . . . . . . . . 8-2 Maintenance precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Engine compartment check locations . . . . . . . . . . . . . . . . 8-6 Engine cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 Checking engine coolant level . . . . . . . . . . . . . . . . . . . 8-8 Changing engine coolant . . . . . . . . . . . . . . . . . . . . . . . . 8-8 Engine oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Checking engine oil level . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Changing engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Changing engine oil filter . . . . . . . . . . . . . . . . . . . . . . . 8-11 Continuously Variable Transmission (CVT) fluid . . . . . . 8-11 Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Windshield-washer fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Windshield-washer fluid reservoir . . . . . . . . . . . . . . . 8-12 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15 Variable voltage control system. . . . . . . . . . . . . . . . . . . . . 8-15 Drive belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Spark plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Replacing spark plugs . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 Windshield wiper blades . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Replacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19 Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Engine compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Passenger compartment . . . . . . . . . . . . . . . . . . . . . . . 8-21 Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23 Key fob (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 8-23 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25 Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25 Park/turn signal lights . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28 Exterior and interior lights. . . . . . . . . . . . . . . . . . . . . . . 8-29 Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32 Tire pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32 Tire labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-36 Types of tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-38 Tire chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-39 Changing wheels and tires . . . . . . . . . . . . . . . . . . . . . 8-39 MAINTENANCE REQUIREMENTS Your NISSAN has been designed to have minimum maintenance requirements with long service intervals to save you both time and money; however, some day-to-day and regular maintenance is essential to maintain your NISSAN’s good mechanical condition as well as its emissions and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed. As the vehicle owner, you are the only one who can ensure that your vehicle receives proper maintenance. You are a vital link in the maintenance chain. Scheduled maintenance For your convenience, both required and optional scheduled maintenance items are described and listed in your “NISSAN Service and Maintenance Guide”. You must refer to that guide to ensure that necessary maintenance is performed on your NISSAN at regular intervals. General maintenance General maintenance includes those items which should be checked during normal day-to-day operation. They are essential for proper vehicle operation. It is your responsibility to perform these maintenance procedures regularly as prescribed. 8-2 Maintenance and do-it-yourself GENERAL MAINTENANCE Performing general maintenance checks requires minimal mechanical skill and only a few general automotive tools. These checks or inspections can be done by you, a qualified technician or, if you prefer, a NISSAN dealer. Where to go for service If maintenance service is required or your vehicle appears to malfunction, have the systems checked and corrected by a NISSAN dealer. NISSAN technicians are well-trained specialists who are kept up-to-date with the latest service information through technical bulletins, service tips and in-dealership training programs. They are completely qualified to work on NISSAN vehicles before they work on your vehicle rather than after they have worked on it. You can be confident that a NISSAN dealer’s service department performs the best job to meet the maintenance requirements on your vehicle — in a reliable and economical way. During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smells, be sure to check for the cause or have a NISSAN dealer do it promptly. In addition, you should notify a NISSAN dealer if you think that repairs are required. When performing any checks or maintenance work, closely observe the “Maintenance precautions” in this section. EXPLANATION OF GENERAL MAINTENANCE ITEMS Additional information on the following items with “ * ” is found in this section. Outside the vehicle The maintenance items listed here should be performed from time to time, unless otherwise specified. Doors and engine hood Check that the doors and engine hood operate properly. Also ensure that all latches lock securely. Lubricate hinges, latches, latch pins, rollers and links as necessary. Make sure that the secondary latch keeps the hood from opening when the primary latch is released. When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim. alignment. If the steering wheel or seat vibrates at normal highway speeds, wheel balancing may be needed. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. Road wheel nuts (lug nuts)* When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts. Tighten if necessary. Windshield Clean the windshield on a regular basis. Check the windshield at least every six months for cracks or other damage. Have a damaged windshield repaired by a qualified repair facility. Tire rotation* Tires should be rotated every 5,000 miles (8,000 km). Windshield wiper blades* Check for cracks or wear if they do not wipe properly. Tires* Check the pressure with a gauge often and always prior to long distance trips. If necessary, adjust the pressure in all tires, including the spare, to the pressure specified. Check carefully for damage, cuts or excessive wear. Inside the vehicle Tire Pressure Monitoring System (TPMS) transmitter components Replace the TPMS transmitter grommet seal, valve core and cap when the tires are replaced due to wear or age. Wheel alignment and balance If the vehicle should pull to either side while driving on a straight and level road, or if you detect uneven or abnormal tire wear, there may be a need for wheel The maintenance items listed here should be checked on a regular basis, such as when performing periodic maintenance, cleaning the vehicle, etc. Additional information on the following items with an “*” is found in this section. Accelerator pedal Check the pedal for smooth operation and make sure the pedal does not bind or require uneven effort. Keep the floor mat away from the pedal. Brake pedal Check the pedal for smooth operation. If the brake pedal suddenly goes down fur- ther than normal, the pedal feels spongy or the vehicle seems to take longer to stop, see a NISSAN dealer immediately. Keep the floor mat away from the pedal. Brakes Check that the brakes do not pull the vehicle to one side when applied. Continuously Variable Transmission (CVT) P (Park) position mechanism On a fairly steep hill, check that the vehicle is held securely with the shift lever in the P (Park) position without applying any brakes. Parking brake Check the parking brake operation regularly. The vehicle should be securely held on a fairly steep hill with only the parking brake applied. If the parking brake needs adjustment, see a NISSAN dealer. Seats Check seat position controls such as seat adjusters, seatback recliner, etc., to ensure they operate smoothly and all latches lock securely in every position. Check that the head restraints/headrests move up and down smoothly and the locks (if so equipped) hold securely in all latched positions. Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly, and are installed securely. Check the belt webbing for cuts, fraying, wear or damage. Maintenance and do-it-yourself 8-3 Steering wheel Check for changes in the steering system, such as excessive freeplay, hard steering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly. NOTE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: Windshield wiper and washer* Check that the wipers and washer operate properly and that the wipers do not streak. 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone chargers, GPS, DVD players, etc.) Windshield defroster Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. 2. Vehicle is not driven regularly and/or only driven short distances. In these cases, the battery may need to be charged to maintain battery health. Under the hood and vehicle The maintenance items listed here should be checked periodically (for example, each time you check the engine oil or refuel). Battery* Check the fluid level in each cell. It should be between the MAX and MIN lines. Vehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. Brake fluid level* Make sure that the brake fluid level is between the MIN and MAX lines on the reservoir. Engine coolant level* Check the coolant level when the engine is cold. Engine drive belts* Make sure the drive belts are not frayed, worn, cracked or oily. Engine oil level* Check the level after parking the vehicle on a level surface with the engine off. Wait more than 10 minutes for the oil to drain back into the oil pan. Exhaust system Make sure there are no loose supports, cracks or holes. If the sound of the exhaust seems unusual or there is a smell of exhaust fumes, immediately have the exhaust 8-4 Maintenance and do-it-yourself system inspected by a NISSAN dealer. See the carbon monoxide warning in the “Starting and driving” section of this manual. Fluid leaks Check under the vehicle for fuel, oil, water or other fluid leaks after the vehicle has been parked for a while. Water dripping from the air conditioner (if so equipped) after use is normal. If you should notice any leaks or if gasoline fumes are evident, check for the cause and have it corrected immediately. Radiator and hoses Check the front of the radiator and clean off any dirt, insects, leaves, etc., that may have accumulated. Make sure the hoses have no cracks, deformation, rot or loose connections. Underbody The underbody is frequently exposed to corrosive substances such as those used on icy roads or to control dust. It is very important to remove these substances from the underbody, otherwise rust may form on the floor pan, frame, fuel lines and exhaust system. At the end of winter, the underbody should be thoroughly flushed with plain water, in those areas where mud and dirt may have accumulated. See the “Appearance and care” section of this manual. Windshield-washer fluid* Check that there is adequate fluid in the reservoir. MAINTENANCE PRECAUTIONS When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precautions which should be closely observed. WARNING ● Park the vehicle on a level surface, apply the parking brake securely and block the wheels to prevent the vehicle from moving. Move the shift lever to P (Park). ● Your vehicle is equipped with an automatic engine cooling fan. It may come on at any time without warning, even if the ignition key is in the OFF position and the engine is not running. To avoid injury, always disconnect the negative battery cable before working near the fan. ● If you must run the engine in an enclosed space such as a garage, be sure there is proper ventilation for exhaust gases to escape. ● Be sure the ignition key is in the OFF or LOCK position when performing any parts replacement or repairs. ● Never get under the vehicle while it is supported only by a jack. If it is necessary to work under the vehicle, support it with safety stands. ● If you must work with the engine running, keep your hands, clothing, hair and tools away from moving fans, belts and any other moving parts. ● Keep smoking materials, flame and sparks away from the fuel tank and battery. ● It is advisable to secure or remove any loose clothing and remove any jewelry, such as rings, watches, etc. before working on your vehicle. ● Always wear eye protection whenever you work on your vehicle. ● On gasoline engine models, the fuel filter or fuel lines should be serviced by a NISSAN dealer because the fuel lines are under high pressure even when the engine is off. CAUTION ● Do not work under the hood while the engine is hot. Turn the engine off and wait until it cools down. ● Avoid contact with used engine oil and coolant. Improperly disposed engine oil, engine coolant and/or other vehicle fluids can damage the environment. Always conform to local regulations for disposal of vehicle fluid. ● Never leave the engine or the CVT related component harness connector disconnected while the ignition switch is in the ON position. ● Never connect or disconnect the battery or any transistorized component while the ignition switch is in the ON position. This “Maintenance and do-it-yourself” section gives instructions regarding only those items which are relatively easy for an owner to perform. A Genuine NISSAN service manual is also available. For additional information, refer to “Owner’s Manual/Service Manual order information” in the “Technical and consumer information” section of this manual. You should be aware that incomplete or improper servicing may result in operating difficulties or excessive emissions, and could affect warranty coverage. If in doubt about any servicing, have it done by a NISSAN dealer. Maintenance and do-it-yourself 8-5 ENGINE COMPARTMENT CHECK LOCATIONS MR20DE engine 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. LDI2279 8-6 Maintenance and do-it-yourself Engine coolant reservoir Engine oil filler cap Brake fluid reservoir Air cleaner Fuse and relay box Battery Radiator cap Engine oil dipstick Drive belt location Windshield-washer fluid reservoir ENGINE COOLING SYSTEM The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round antifreeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary. WARNING ● Never remove the radiator or coolant reservoir cap when the engine is hot. Wait until the engine and radiator cool down. Serious burns could be caused by high pressure fluid escaping from the radiator. For additional information, refer to precautions in “If your vehicle overheats” found in the “In case of emergency” section of this manual. ● The radiator is equipped with a pressure type radiator cap. To prevent engine damage, use only a Genuine NISSAN radiator cap. CAUTION ● Never use any cooling system additives such as radiator sealer. Additives may clog the cooling system and cause damage to the engine, transmission and/or cooling system. ● When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent. Genuine NISSAN Long Life Antifreeze/Coolant (blue) is pre-diluted to provide antifreeze protection to -34° F (-37° C). If additional freeze protection is needed due to weather where you operate your vehicle, add Genuine NISSAN Long Life Antifreeze/Coolant (blue) concentrate following the directions on the container. If an equivalent coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) is used, follow the coolant manufacturer’s instructions to maintain minimum antifreeze protection to -34° F (-37° C). The use of other types of coolant solutions other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent may damage the engine cooling system. ● The life expectancy of the factory-fill coolant is 105,000 miles (168,000 km) or 7 years. Mixing any other type of coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue), including Genuine NISSAN Long Life Antifreeze/Coolant (green), or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. For additional information, refer to the NISSAN Service and Maintenance Guide. Maintenance and do-it-yourself 8-7 coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. Refer to the NISSAN Service and Maintenance Guide for more details. ● Avoid direct skin contact with used coolant. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. The engine coolant reservoir is a pressurized tank. When installing the cap, tighten. ● Keep coolant out of the reach of children and pets. If the cooling system frequently requires coolant, have it checked by a NISSAN dealer. Engine coolant must be disposed of properly. Check your local regulations. CHANGING ENGINE COOLANT LDI2202 CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level, add coolant to the MAX level. If the reservoir is empty, check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with coolant up to the filler opening and also add it to the reservoir up to the MAX level. This vehicle contains Genuine NISSAN Long Life Antifreeze/Coolant (blue). The life expectancy of the factory-fill coolant is 105,000 miles (168,000 km) or 7 years. Mixing any other type of 8-8 Maintenance and do-it-yourself A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheating. WARNING ● To avoid the danger of being scalded, never change the coolant when the engine is hot. ● Never remove the radiator or engine coolant reservoir cap when the engine is hot. Serious burns could be caused by high pressure fluid escaping from the radiator. ENGINE OIL CAUTION Oil level should be checked regularly. Operating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by warranty. Make sure to follow the engine oil changing intervals in the maintenance booklet. Operating under the following conditions may require more frequent oil change: ● Repeated short distance driving ● Driving in dusty conditions LDI2203 CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the way. LDI0371 ● Stop and go commuting 5. Remove the dipstick again and check the oil level. It should be between the H (High) and B . This is the normal operL (Low) marks 䊊 ating oil level range. If the oil level is below A , remove the oil filler cap the L (Low) mark 䊊 and pour recommended oil through the C. opening. Do not overfill 䊊 6. Recheck oil level with the dipstick. It is normal to add some oil between oil maintenance intervals or during the break-in period, depending on the severity of operating conditions. Maintenance and do-it-yourself 8-9 B by turning it 3. Remove the oil filler cap 䊊 counterclockwise. 4. Place a large drain pan under the drain plug A. 䊊 A with a wrench by 5. Remove the drain plug 䊊 turning it counterclockwise and completely drain the oil. If the oil filter is to be changed, remove and replace it at this time. For additional information, refer to “Changing engine oil filter” in this section. ● Waste oil must be disposed of properly. ● Check your local regulations. WARNING ● Prolonged and repeated contact with used engine oil may cause skin cancer. LDI2424 CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 8-10 Maintenance and do-it-yourself ● Try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. ● Keep used engine oil out of reach of children. CAUTION Be careful not to burn yourself. The engine oil may be hot. 6. Clean and reinstall the drain plug and a new washer. Securely tighten the drain plug with a wrench. Do not use excessive force. Drain plug tightening torque: 25 ft-lb (34 N·m) 7. Refill engine with recommended oil through the oil filler opening, then install the oil filler cap securely. Refer to “Recommended fluids/lubricants and capacities” in the “Technical and consumer information” section of this manual for drain and refill capacity. The drain and refill capacity depends on the oil temperature and drain time. Use these specifications for reference only. Always use the dipstick to determine when the proper amount of oil is in the engine. 8. Start the engine. Check for leakage around the drain plug and oil filter. Correct as required. 9. Turn the engine off and wait more than 10 minutes. Check the oil level with the dipstick. Add engine oil if necessary. CONTINUOUSLY VARIABLE TRANSMISSION (CVT) FLUID 4. Loosen the oil filter with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. CAUTION Be careful not to burn yourself. The engine oil may be hot. 5. Wipe the engine oil filter sealing surface with a clean rag. CAUTION Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to engine damage. 6. Coat the gasket on the new filter with clean engine oil. 7. Screw on the oil filter until a slight resistance is felt, then tighten an additional 2/3 turn. LDI2425 CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. Turn the engine off. B. 3. Place a large drain pan under the oil filter 䊊 Oil filter tightening torque: 13 ft-lbs (18 N·m) CAUTION ● NISSAN recommends using Genuine NISSAN CVT Fluid NS-3 ONLY in NISSAN CVTs. Do not mix with other fluids. ● Do not use Automatic transmission fluid (ATF) or Manual transmission fluid in a NISSAN CVT, as it may damage the CVT. Damage caused by the use of fluids other than recommended is not covered under NISSAN’s New Vehicle Limited Warranty. ● Using fluids that are not equivalent to Genuine NISSAN CVT Fluid NS-3 may damage the CVT. Damage caused by the use of fluids other than as recommended is not covered under NISSAN’s New Vehicle Limited Warranty. When checking or replacement of CVT fluid is required, we recommend your NISSAN dealer for servicing. 8. Start the engine and check for leakage around the oil filter. Correct as required. 9. Turn the engine off and wait more than 10 minutes. Check the oil level. Add engine A if necesoil by removing the oil filler cap 䊊 sary. Maintenance and do-it-yourself 8-11 BRAKE FLUID WINDSHIELD-WASHER FLUID WARNING ● Use only new fluid from a sealed container. Old, inferior or contaminated fluid may damage the brake system. The use of improper fluids can damage the brake system and affect the vehicle’s stopping ability. ● Clean the filler cap before removing. ● Brake fluid is poisonous and should be stored carefully in marked containers out of reach of children. CAUTION Do not spill the fluid on any painted surfaces. This will damage the paint. If fluid is spilled, immediately wash the surface with water. LDI2207 WINDSHIELD-WASHER FLUID RESERVOIR If the brake fluid must be added frequently, the brake system should be thoroughly checked by a NISSAN dealer. To fill the windshield-washer fluid reservoir, lift the cap off the reservoir and pour the windshieldwasher fluid into the reservoir opening. Refer to “Engine compartment check locations” in this section for location of the reservoir. 8-12 Maintenance and do-it-yourself LDI2208 Check the fluid level in the reservoir. If the brake B , the brake warning fluid is below the MIN line 䊊 light will illuminate. Add brake fluid up to the MAX A. Refer to “Recommended line 䊊 fluids/lubricants and capacities” in the “Technical and consumer information” section for the recommended type of brake fluid. Fill the windshield-washer fluid reservoir periodically. Add windshield-washer fluid when the low windshield-washer fluid warning light (if so equipped) comes on. Add a washer solvent to the washer for better cleaning. In the winter season, add a windshieldwasher antifreeze. Follow the manufacturer’s instructions for the mixture ratio. BATTERY Refill the reservoir more frequently when driving conditions require an increased amount of windshield-washer fluid. ● Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. Recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent. ● Make certain the terminal connections are clean and securely tightened. CAUTION ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge. ● Do not substitute engine antifreeze coolant for windshield-washer fluid. This may result in damage to the paint. NOTE: ● Do not fill the windshield-washer fluid reservoir with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the windshieldwasher fluid reservoir. Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone chargers, GPS, DVD players, etc.) ● Pre-mix washer fluid concentrates with water to the manufacturer’s recommended levels before pouring the fluid into the windshield-washer fluid reservoir. Do not use the windshield-washer fluid reservoir to mix the washer fluid concentrate and water. 2. Vehicle is not driven regularly and/or only driven short distances. In these cases, the battery may need to be charged to maintain battery health. WARNING ● Do not expose the battery to flames, an electrical spark or a cigarette. Hydrogen gas generated by the battery is explosive. Explosive gases can cause blindness or injury. Do not allow battery fluid to contact your skin, eyes, fabrics or painted surfaces. Sulfuric acid can cause blindness or injury. After touching a battery or battery cap, do not touch or rub your eyes. Thoroughly wash your hands. If the acid contacts your eyes, skin or clothing, immediately flush with water for at least 15 minutes and seek medical attention. ● Do not operate the vehicle if the fluid in the battery is low. Low battery fluid can cause a higher load on the battery which can generate heat, reduce battery life, and in some cases lead to an explosion. ● When working on or near a battery, always wear suitable eye protection and remove all jewelry. ● Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after handling. Maintenance and do-it-yourself 8-13 ● Keep battery out of the reach of children. ● Do not tip the battery. Keep the vent caps tight and the battery level. WDI0224 1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. LDI0302 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. 8-14 Maintenance and do-it-yourself VARIABLE VOLTAGE CONTROL SYSTEM A is located near the battery The current sensor 䊊 along the negative battery cable. If you add electrical accessories to your vehicle, be sure to ground them to a suitable body ground such as the frame or engine block area. Vehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. JUMP STARTING If jump starting is necessary, refer to “Jump starting” in the “In case of emergency” section of this manual for additional information. If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN dealer. LDI2178 CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely. ● Use electrical accessories with the engine running to avoid discharging the vehicle battery. Your vehicle is equipped with a variable voltage control system. This system measures the amount of electrical discharge from the battery and controls voltage generated by the generator. Maintenance and do-it-yourself 8-15 DRIVE BELT SPARK PLUGS 2. Have the belt checked regularly for condition. WDI0638 1. 2. 3. 4. 5. Automatic tensioner pulley Generator pulley Water pump pulley Air conditioner compressor pulley Crankshaft pulley WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly. 1. Visually inspect the belt for signs of unusual wear, cuts, or fraying. If the belt is in poor condition, have it replaced or adjusted by a NISSAN dealer. 8-16 Maintenance and do-it-yourself SDI1895 REPLACING SPARK PLUGS Iridium-tipped spark plugs A It is not necessary to replace iridium-tipped 䊊 spark plugs as frequently as conventional type spark plugs because they last much longer. Follow the maintenance log shown in the “NISSAN Service and Maintenance Guide”. Do not service iridium-tipped spark plugs by cleaning or regapping. ● Always replace spark plugs with recommended or equivalent ones. AIR CLEANER NOTE: WARNING After installing a new air cleaner, make sure the air cleaner cover is seated in the housing and latch the clips. Be sure the engine and ignition switch are off and that the parking brake is engaged securely. WARNING CAUTION Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs. If replacement is required, see your NISSAN dealer for assistance. LDI2209 The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Maintenance Guide.” To remove the air cleaner filter: ● Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops the flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed. ● Never pour fuel into the throttle body or attempt to start the engine with the air cleaner removed. Doing so could result in serious injury. 1 and move the air cleaner 1. Push in the tabs 䊊 cover upward. 2. Remove the air cleaner filter. 3. Wipe the inside of the air cleaner filter housing and the cover with a damp cloth. Maintenance and do-it-yourself 8-17 WINDSHIELD WIPER BLADES 6. Return the wiper to its original position and release it until it has made contact with the windshield. CLEANING If your windshield is not clear after using the windshield-washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. CAUTION ● After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. Clean the outside of the windshield with a washer solution or a mild detergent. Your windshield is clean if beads do not form when rinsing with clear water. Clean each blade by wiping it with a cloth soaked in a washer solution or a mild detergent. Then rinse the blades with clear water. If your windshield is still not clear after cleaning the blades and using the wiper, replace the blades. CAUTION Worn windshield wiper blades can damage the windshield and impair driver vision. ● Make sure the wiper blades contact the glass; otherwise the arms may be damaged from wind pressure. WDI0594 REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 䊊 2 3 䊊 Push the release tab, then move the wiper blade down the wiper arm to remove. Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place. 5. Rotate wiper blade so the dimple is in the groove. 8-18 Maintenance and do-it-yourself BRAKES If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. Self-adjusting brakes Your vehicle is equipped with self-adjusting brakes. The front disc-type brakes self-adjust every time the brake pedal is applied. The rear drum-type brakes self-adjust every time the parking brake is applied. Under some driving or climate conditions, occasional brake squeak, squeal or other noise may be heard. Occasional brake noise during light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For additional information regarding brake inspections, refer to the appropriate maintenance schedule information in the “NISSAN Service and Maintenance Guide”. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to normal. Brake pad wear indicators LDI2187 Be careful not to let anything get into the washer A . This may cause clogging or improper nozzle 䊊 windshield washer operation. If something gets into the nozzle, remove it with a needle or small B. pin 䊊 The disc brake pads on your vehicle have audible wear indicators. When a brake pad requires replacement, a high pitched scraping or screeching sound will be heard when the vehicle is in motion. The noise will be heard whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the wear indicator sound is heard. Maintenance and do-it-yourself 8-19 FUSES 3. Remove the fuse box cover by pushing the tab and lifting the cover up. 4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment. LDI2384 If any electrical equipment does not operate, check for an open fuse. Fuses are used in the passenger and engine compartment. Spare fuses are provided and can be found in the passenger compartment fuse box. When installing a fuse make sure the fuse is installed in the fuse box securely. LDI2288 ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF. 2. Open the engine hood. 8-20 Maintenance and do-it-yourself WDI0452 A , replace it with a new 5. If the fuse is open 䊊 B. fuse 䊊 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. LDI2211 Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only Genuine NISSAN parts. LDI2231 PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF. 2. Pull the fuse box cover to remove. 3. Remove the fuse with the fuse puller. Maintenance and do-it-yourself 8-21 How to replace the extended storage switch: 1. To remove the extended storage switch, be sure the ignition switch is in the OFF or LOCK position. 2. Be sure the headlight switch is in the OFF position. 3. Remove the fuse box cover. 1 and 䊊 2 found on 4. Pinch the locking tabs 䊊 each side of the storage switch. 5. Pull the storage switch straight out from the 3 . fuse box 䊊 WDI0452 A , replace it with an 4. If the fuse is open 䊊 B. equivalent good fuse 䊊 5. Push the fuse box cover to install. 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. LDI2216 Extended storage switch If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse. NOTE: The extended storage switch is used for long term vehicle storage. Even if the extended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switch with a new fuse. 8-22 Maintenance and do-it-yourself BATTERY REPLACEMENT 2. Insert a small screwdriver into the slit of the B and twist it to separate the upper corner 䊊 part from the lower part. Use a cloth to protect the casing. CAUTION Be careful not to allow children to swallow the battery or removed parts. 3. Replace the battery with a new one. ● Do not touch the internal circuit and electric terminals as doing so could cause a malfunction. ● Make sure that the + side faces the botC. tom of the case 䊊 Recommended battery: CR1620 or equivalent. 4. Close the lid and install the screw securely. 5. Operate the buttons to check its operation. See a NISSAN dealer if you need assistance for replacement. If the battery is removed for any reason other than replacement, perform step 5. LDI2219 KEY FOB (if so equipped) Replace the battery in the key fob as follows: A. 1. Remove the screw 䊊 ● An improperly disposed battery can hurt the environment. Always confirm local regulations for battery disposal. ● The key fob is water-resistant; however, if it does get wet, immediately wipe completely dry. Maintenance and do-it-yourself 8-23 ● The operational range of the key fob extends to approximately 33 ft (10 m) from the vehicle. This range may vary with conditions. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 8-24 Maintenance and do-it-yourself For Canada: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. LIGHTS HEADLIGHTS Replacing the halogen headlight bulb LDI2222 Maintenance and do-it-yourself 8-25 Disconnect the negative battery cable before replacement and installation of the headlight bulb. 1 䊊 2 䊊 Release the clip on the connector. Rotate the bulb counterclockwise and pull out to remove. Replace as necessary. CAUTION ● Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact a NISSAN dealer. ● Do not leave the headlight assembly open without a bulb installed for a long period of time. Dust, moisture, smoke, etc. entering the headlight body may affect bulb performance. Remove the bulb from the headlight assembly just before a replacement bulb is installed. ● Only touch the base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect bulb life and/or headlight performance. ● High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. ● Use the same number and wattage as shown in the chart. 8-26 Maintenance and do-it-yourself Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. Aiming the headlights The headlights on your vehicle are properly aimed at the assembly plant. If your vehicle has been in a collision, the alignment of your headlights should be checked by a NISSAN dealer. Vertical aim adjustment NOTE: Due to a maximum load condition of the vehicle, headlight aiming adjustment may be necessary. Please perform the following procedure: LDI2252 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away. ● ● ● ● 1 8 feet (2.4 meters) 䊊 2 Center height of headlight to ground 䊊 3 25 feet (7.6 meters) 䊊 4 Horizontal reference line 䊊 2. Measure the height from the center of the headlight to the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height (a piece of masking tape works well). 3. Turn on the low beam headlights to illuminate the wall or screen and open the hood. LDI2255 LDI2254 4. On the wall or screen you will observe an area of high intensity light. The top of the high intensity area should touch the horizontal reference line. If not, the beam will need to be adjusted. 5. Locate the vertical adjuster on each headlight, then use a suitable tool to adjust the headlight up or down. 6. Close the hood and turn off the headlights. NOTE: Horizontal aim is not required for this vehicle and is not adjustable. Maintenance and do-it-yourself 8-27 PARK/TURN SIGNAL LIGHTS Replacing the park/turn signal bulb LDI2223 8-28 Maintenance and do-it-yourself Disconnect the negative battery cable before replacement and installation of the headlight bulb. 1 䊊 Rotate the bulb counterclockwise and pull out to remove. Replace as necessary. EXTERIOR AND INTERIOR LIGHTS Item Headlight assembly/daytime running lights High/ Low Park/Turn Map lamp Cargo lamp High-mounted stop light Rear combination light Tail/Stop Backup (reversing) Turn License plate light Wattage (W) Bulb No. 60/55 28/8 5 5 16 H13 3457K W5W W5W W16W 21/7 16 27 5 3047 921 3157AK T10 * See a NISSAN dealer for replacement. Always check with the Parts Department at a NISSAN dealer for the latest parts information. Maintenance and do-it-yourself 8-29 1. 2. 3. 4. 5. 6. Map light Headlight assembly/daytime running lights High-mount stop light Cargo light Rear combination light License plate light LDI2507 WDI0263 Replacement procedures All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover using a cloth and suitable tool. Indicates bulb removal Indicates bulb installation 8-30 Maintenance and do-it-yourself LDI2217 Map light Use a cloth to protect the housing. LDI2220 Interior lights (rear) Use a cloth to protect the housing. Maintenance and do-it-yourself 8-31 WHEELS AND TIRES If you have a flat tire, refer to “Flat tire” in the “In case of emergency” section of this manual for additional information. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with TPMS. It monitors tire pressure of all four tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRES (pressure) warning is displayed in the odometer, one or more of your tires is significantly under-inflated. TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving). LDI2221 1 䊊 2 䊊 3 䊊 Rear combination light Remove the fasteners. Remove the rear combination light assembly. Remove the bulb(s) and replace as necessary. 8-32 Maintenance and do-it-yourself For additional information, refer to “Warning/Indicator Lights and Audible Reminders” in the “Instruments and controls” section, “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” section, and “Flat tire” in the “In case of emergency” section of this manual. Tire inflation pressure Check the tire pressures (including the spare) often and always prior to long distance trips. The recommended tire pressure specifications are shown on the F.M.V.S.S./C.M.V.S.S. certification label or the Tire and Loading Information label under the “Cold Tire Pressure” heading. The Tire and Loading Information label is affixed to the driver side center pillar. Tire pressures should be checked regularly because: ● Most tires naturally lose air over time. ● Tires can lose air suddenly when driven over potholes or other objects or if the vehicle strikes a curb while parking. The tire pressures should be checked when the tires are cold. The tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. Incorrect tire pressure, including under inflation, may adversely affect tire life and vehicle handling. WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross Vehicle Weight Rating (GVWR) is located on the F.M.V.S.S./C.M.V.S.S. certification label. The vehicle weight capacity is indicated on the Tire and Loading Information label. Do not load your vehicle beyond this capacity. Overloading your vehicle may result in reduced tire life, unsafe operating conditions due to premature tire failure, or unfavorable handling characteristics and could also lead to a serious accident. Loading beyond the specified capacity may also result in failure of other vehicle components. ● Before taking a long trip, or whenever you heavily load your vehicle, use a tire pressure gauge to ensure that the tire pressures are at the specified level. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. Maintenance and do-it-yourself 8-33 6 䊊 Spare tire size. Payload and replacement tire LDI2495 Tire and loading information label 1 䊊 2 䊊 3 䊊 4 䊊 Seating capacity: The maximum number of occupants that can be seated in the vehicle. Vehicle load limit: For additional information, refer to “Vehicle loading information” in the “Technical and consumer information” section of this manual. Original tire size: The size of the tires originally installed on the vehicle at the factory. 8-34 Maintenance and do-it-yourself 5 䊊 Cold tire pressure: Inflate the tires to this pressure when the tires are cold. Tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recommended cold tire inflation is set by the manufacturer to provide the best balance of tire wear, vehicle handling, driveability, tire noise, etc., up to the vehicle’s GVWR. Tire size - refer to “Tire labeling” in this section. Your vehicle is equipped with special high load index 94 tires to carry a payload of up to 1,500 lbs (680 kg) as indicated on your tire information placard. Some aftermarket replacement tires may have lower load index ratings. While NISSAN does not encourage you to do so, please note that if you choose to purchase a tire with a lower load index rating, the max payload capacity of your vehicle will be reduced (for example, tires with load index 84 would reduce max payload to 750 lbs (340 kg) and tires with load index 88 would reduce max payload to 1,200 lbs (544 kg)). Please refer to replacement tire manufacturer usage recommendations and tire pressures. 4. Read the tire pressure on the gauge stem and compare to the specification shown on the Tire and Loading Information label. 5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. LDI0393 Checking tire pressure 1. Remove the valve stem cap from the tire. 7. Check the pressure of all other tires, including the spare. Size Front Original Tire: 185/60R15C 94/ 92T Rear Original Tire: 185/60R15C 94/ 92T Spare Tire (Front): 185/60R15C 94/ 92T Spare Tire (Rear): 185/60R15C 94/ 92T Cold Tire Inflation Pressure 44 psi (300 kPa) 48 psi (325 kPa) 44 psi (300 kPa) 48 psi (325 kPa) 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. Maintenance and do-it-yourself 8-35 WDI0394 Example TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. 8-36 Maintenance and do-it-yourself LDI2043 Example 1 Tire size (example: LT215/65R15 95H) 䊊 1. LT: The “LT” indicates the tire is designed for light truck vehicles (not all tires have this information). 2. Three-digit number (215): This number gives the width in millimeters of the tire from sidewall edge to sidewall edge. 3. Two-digit number (65): This number, known as the aspect ratio, gives the tire’s ratio of height to width. 4. R: The “R” stands for radial. 5. Two-digit number (15): This number is the wheel or rim diameter in inches. 6. Two- or three-digit number (95): This number is the tire’s load index. It is a measurement of how much weight each tire can support. You may not find this information on all tires because it is not required by law. 7. H: Tire speed rating. You should not drive the vehicle faster than the tire speed rating. ers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. 4 Maximum permissible inflation pressure 䊊 This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure. 5 Maximum load rating 䊊 WDI0396 Example 2 TIN for a new tire (example: DOT XX 5. Three-digit code: Date of Manufacture. 䊊 XX XXX XXXX) 1. DOT: Abbreviation for the “Department Of Transportation”. The symbol can be placed above, below or to the left or right of the TIN. 2. Two-digit code: identification mark. Manufacturer’s 3. Two-digit code: Tire size. 4. Three-digit code: Tire type code (Optional). 6. Four numbers represent the week and year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire. 3 Tire ply composition and material 䊊 The number of layers or plies of rubbercoated fabric in the tire. Tire manufactur- This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed tire. 6 Term of “tubeless” or “tube type” 䊊 Indicates whether the tire requires an inner tube (“tube type”) or not (“tubeless”). 7 The word “radial” 䊊 The word “radial” is shown if the tire has radial structure. 8 Manufacturer or brand name 䊊 Manufacturer or brand name is shown. Maintenance and do-it-yourself 8-37 Other Tire-related Terminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears white lettering or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (2) the outward facing sidewall of an asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle. TYPES OF TIRES WARNING ● When changing or replacing tires, be sure all four tires are of the same type (i.e., Summer, All Season or Snow) and construction. A NISSAN dealer may be able to help you with information about tire type, size, speed rating and availability. ● Replacement tires may have a lower speed rating than the factory equipped tires, and may not match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire. ● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the low tire pressure warning system. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. All season tires NISSAN specifies All Season tires on some models to provide good performance all year, including snowy and icy road conditions. All Season tires are identified by ALL SEASON and/or M&S on the tire sidewall. Snow tires have better snow traction than All Season tires and may be more appropriate in some areas. Summer tires NISSAN specifies summer tires on some models to provide superior performance on dry roads. Summer tire performance is substantially re- 8-38 Maintenance and do-it-yourself duced in snow and ice. Summer tires do not have the tire traction rating “M&S” on the tire sidewall. If you plan to operate your vehicle in snowy or icy conditions, NISSAN recommends the use of SNOW tires or ALL SEASON tires on all four wheels. Snow tires If snow tires are needed, it is necessary to select tires equivalent in size and load rating to the original equipment tires. If you do not, it can adversely affect the safety and handling of your vehicle. Generally, snow tires have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire. If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels. For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When installing tire chains, make sure they are the proper size for the tires on your vehicle and are installed according to the chain manufacturer’s suggestions. Use only SAE class “S” chains. Class “S” chains are used on vehicles with restricted tire to vehicle clearance. Vehicles that can use Class “S” chains are designed to meet the minimum clearances between the tire and the closest vehicle suspension or body component required to accommodate the use of a winter traction device (tire chains or cables). The minimum clearances are determined using the factory equipped tire size. Other types may damage your vehicle. Use chain tensioners when recommended by the tire chain manufacturer to ensure a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your vehicle may be damaged and/or vehicle handling and performance may be adversely affected. Tire chains must be installed only on the front wheels and not on the rear wheels. Do not use tire chains on dry roads. Driving with chains in such conditions can cause damage to the various mechanisms of the vehicle due to some overstress. WDI0258 CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km). See “Flat tire” in the “In case of emergency” section in this manual for tire replacing procedures. As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Maintenance and do-it-yourself 8-39 Wheel nut tightening torque: 83 ft-lb (113 N·m) The wheel nuts must be kept tightened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. After rotating the tires, adjust the tire pressure to the cold tire pressure specification shown on the tire and loading information label, see “Checking tire pressure” in this section and “Tire and loading information label” in the “Technical and consumer information” section. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). ● Do not include the spare tire in the tire rotation. 8-40 Maintenance and do-it-yourself ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. WDI0259 Tire wear and damage 1. Wear indicator 2. Location mark WARNING ● Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced. ● The original tires have built-in tread wear indicators. When the wear indicators are visible, the tire(s) should be replaced. ● Tires degrade with age and use. Have tires, including the spare, over 6 years old checked by a qualified technician because some tire damage may not be obvious. Replace the tires as necessary to prevent tire failure and possible personal injury. ● Improper service of the spare tire may result in serious personal injury. If it is necessary to repair the spare tire, contact a NISSAN dealer. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “Technical and consumer information” section of this manual. WARNING ● The use of tires other than those recommended or the mixed use of tires of different brands, construction (bias, bias-belted or radial), or tread patterns can adversely affect the ride, braking, handling, VDC system, ground clearance, body-to-tire clearance, tire chain clearance, speedometer calibration, headlight aim and bumper height. Some of these effects may lead to accidents and could result in serious personal injury. ● If your vehicle was originally equipped with 4 tires that were the same size and you are only replacing 2 of the 4 tires, install the new tires on the rear axle. Placing new tires on the front axle may cause loss of vehicle control in some driving conditions and cause an accident and personal injury. ● If the wheels are changed for any reason, always replace with wheels which have the same off-set dimension. Wheels of a different off-set could cause premature tire wear, degrade vehicle handling characteristics, affect the VDC system and/or interference with the brake discs. Such interference can lead to decreased braking efficiency and/or early brake pad wear. Refer to “Wheels and tires” in the “Technical and consumer information” section of this manual for wheel off-set dimensions. ● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. Maintenance and do-it-yourself 8-41 ● Do not install a damaged or deformed wheel or tire even if it has been repaired. Such wheels or tires could have structural damage and could fail without warning. ● The use of retread recommended. tires is not ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be performed with the wheels off the vehicle. Spin balancing the wheels on the vehicle could lead to mechanical damage. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet. 8-42 Maintenance and do-it-yourself Care of wheels ● Wash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. ● Do not use abrasive cleaners when washing the wheels. ● Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressure or poor seal at the tire bead. ● NISSAN recommends waxing the road wheels to protect against road salt in areas where it is used during winter. 9 Technical and consumer information Recommended fluids/lubricants and capacities . . . . . . . 9-2 Recommended fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 Engine oil and oil filter recommendations . . . . . . . . . . 9-5 Air conditioner system refrigerant and oil recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7 Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . 9-8 When traveling or registering your vehicle in another country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9 Vehicle identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9 Vehicle identification number (VIN) plate . . . . . . . . . . 9-9 Engine serial number. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9 F.M.V.S.S./C.M.V.S.S. certification label . . . . . . . . . . 9-10 Emission control information label . . . . . . . . . . . . . . . 9-10 Tire and loading information label. . . . . . . . . . . . . . . . 9-10 Tire warning label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11 Air conditioner specification label. . . . . . . . . . . . . . . . 9-11 Installing front license plate . . . . . . . . . . . . . . . . . . . . . . . . 9-11 Vehicle loading information . . . . . . . . . . . . . . . . . . . . . . . . 9-12 Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12 Vehicle load capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13 Securing the load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15 Loading tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 Measurement of weights . . . . . . . . . . . . . . . . . . . . . . . 9-16 Towing a trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 Flat towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 Uniform tire quality grading . . . . . . . . . . . . . . . . . . . . . . . . 9-17 Emission control system warranty . . . . . . . . . . . . . . . . . . 9-18 Reporting safety defects . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18 Readiness for inspection/maintenance (I/M) test . . . . . 9-19 Event Data Recorders (EDR). . . . . . . . . . . . . . . . . . . . . . . 9-20 Owner’s Manual/Service Manual order information . . . 9-20 RECOMMENDED FLUIDS/ LUBRICANTS AND CAPACITIES The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) US measure Imp measure 14-1/2 gal 12-1/8 gal Fuel Engine oil Drain and refill Cooling system Recommended Fluids and Lubricants Liter 55 L Drain and refill With oil filter change 4-5/8 qt 3-7/8 qt 4.4 L Without oil filter change 4-1/2 qt 3-3/4 qt 4.2 L With reservoir 2 gal 1-5/8 gal Continuously Variable Transmission (CVT) fluid Brake fluid Multi-purpose grease 7.6 L Refill to the proper level according to the instructions in the “Maintenance and do-it-yourself” section. Refill to the proper level according to the instructions in the “Maintenance and do-it-yourself” section. — — — Air conditioning system refrigerant — — — Air conditioning system oil — — — 1-1/4 gal 1 gal 4.5 L Windshield-washer fluid 9-2 Technical and consumer information • For additional information, refer to “Recommended fuel” in this section. • For additional information, refer to “Engine oil” in the “Maintenance and do-it-yourself” section. • Genuine NISSAN engine oil or equivalent • Engine oil with API Certification Mark • Viscosity SAE 5W-30 • For additional information, refer to “Engine oil and oil filter recommendations” in this section. • Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent • Genuine NISSAN CVT fluid NS-3 • NISSAN recommends using Genuine NISSAN CVT Fluid NS-3 ONLY in NISSAN CVTs. Do not mix with other fluids. Using fluids that are not equivalent to Genuine NISSAN CVT Fluid NS-3 may damage the CVT. Damage caused by the use of fluids other than as recommended is not covered under NISSAN’s New Vehicle Limited Warranty. • Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 • Available in mainland USA through a NISSAN dealer. • NLGI No. 2 (Lithium Soap base) • HFC-134a (R-134a) • For additional information, refer to “Air conditioner specification label” in this section. • Genuine NISSAN A/C System Oil Type R or equivalent • For additional information, refer to “Air conditioner specification label” in this section. • Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent RECOMMENDED FUEL Gasoline specifications Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). NISSAN recommends using gasoline that meets the World-Wide Fuel Charter (WWFC) specifications where it is available. Many of the automobile manufacturers developed this specification to improve emission control system and vehicle performance. Ask your service station manager if the gasoline meets the WWFC specifications. CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst. ● Do not use E-15 or E-85 fuel in your vehicle. Your vehicle is not designed to run on E-15 or E-85 fuel. Using E-15 or E-85 fuel in a vehicle not specifically designed for E-15 or E-85 fuel can adversely affect the emission control devices and systems of the vehicle. Damage caused by such fuel is not covered by the NISSAN new vehicle limited warranty. ● U.S. government regulations require ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region. Reformulated gasoline Some fuel suppliers are now producing reformulated gasolines. These gasolines are specially designed to reduce vehicle emissions. NISSAN supports efforts towards cleaner air and suggests that you use reformulated gasoline when available. Gasoline containing oxygenates Some fuel suppliers sell gasoline containing oxygenates such as ethanol, MTBE and methanol with or without advertising their presence. NISSAN does not recommend the use of fuels of which the oxygenate content and the fuel compatibility for your NISSAN cannot be readily determined. If in doubt, ask your service station manager. If you use oxygenate-blend gasoline, please take the following precautions as the usage of such fuels may cause vehicle performance problems and/or fuel system damage. ● The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline. ● If an oxygenate-blend other than methanol blend is used, it should contain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.) ● E-15 fuel contains more than 10% oxygenate. E-15 fuel will adversely affect the emission control devices and systems of the vehicle and should not be used. Damage caused by such fuel is not covered by the NISSAN new vehicle limited warranty. Technical and consumer information 9-3 ● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suitable amount of appropriate cosolvents and corrosion inhibitors. If not properly formulated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not available to ensure that all methanol blends are suitable for use in NISSAN vehicles. If any driveability problems such as engine stalling and difficult hot-starting are experienced after using oxygenate-blend fuels, immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. Take care not to spill gasoline during refueling. Gasoline containing oxygenates can cause paint damage. E–15 fuel Octane rating tips E-15 fuel is a mixture of approximately 15% fuel ethanol and 85% unleaded gasoline. E-15 can only be used in vehicles designed to run on E-15 fuel. Do not use E-15 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified with small, square, orange and black label with the common abbreviation or the appropriate percentage for that region. Using unleaded gasoline with an octane rating lower than recommended can cause persistent, heavy “spark knock.” (“Spark knock” is a metallic rapping noise.) If severe, this can lead to engine damage. If you detect a persistent heavy spark knock even when using gasoline of the stated octane rating, or if you hear steady spark knock while holding a steady speed on level roads, have a NISSAN dealer correct the condition. Failure to correct the condition is misuse of the vehicle, for which NISSAN is not responsible. E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel Vehicle (FFV). Do not use E-85 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region. Aftermarket fuel additives NISSAN does not recommend the use of any aftermarket fuel additives (for example, fuel injector cleaner, octane booster, intake valve deposit removers, etc.) which are sold commercially. Many of these additives intended for gum, varnish or deposit removal may contain active solvents or similar ingredients that can be harmful to the fuel system and engine. 9-4 Technical and consumer information Incorrect ignition timing may result in spark knock, after-run and/or overheating, which may cause excessive fuel consumption or engine damage. If any of the above symptoms are encountered, have your vehicle checked at a NISSAN dealer. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is not a cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time under heavy engine load. Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage. Selecting the correct oil filter LTI2061 ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. Refer to “Recommended fluids/lubricants and capacities” in this section. NISSAN recommends the use of an energy conserving oil in order to improve fuel economy. Select only engine oils that meet the American Petroleum Institute (API) certification or International Lubricant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard. These oils have the API certification mark on the front of the container. Oils which do not have the specified quality label should not be used as they could cause engine damage. Oil additives NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed. Oil which may contain foreign matter or has been previously used should not be used. Your new NISSAN vehicle is equipped with a high-quality Genuine NISSAN oil filter. When replacing, use a Genuine NISSAN oil filter or its equivalent for the reason described in “Change intervals.” Change intervals The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Using engine oil and filters that are not of the specified quality, or exceeding recommended oil and filter change intervals could reduce engine life. Damage to the engine caused by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not covered by the NISSAN new vehicle limited warranty. Technical and consumer information 9-5 Your engine was filled with a high-quality engine oil when it was built. You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance driving at cold outside temperatures ● driving in dusty conditions ● extensive idling ● towing a trailer ● stop and go commuting For additional information, refer to the “NISSAN Service and Maintenance Guide” for the maintenance schedule. AIR CONDITIONER SYSTEM REFRIGERANT AND OIL RECOMMENDATIONS The air conditioner system in your NISSAN vehicle must be charged with the refrigerant HFC-134a (R-134a) and NISSAN A/C system oil Type S or the exact equivalents. 9-6 Technical and consumer information CAUTION The use of any other refrigerant or oil will cause severe damage to the air conditioning system and will require the replacement of all air conditioner system components. The refrigerant HFC-134a (R-134a) in your NISSAN vehicle does not harm the earth’s ozone layer. Although this refrigerant does not affect the earth’s atmosphere, certain government regulations require the recovery and recycling of any refrigerant during automotive air conditioner system service. A NISSAN dealer has the trained technicians and equipment needed to recover and recycle your air conditioner system refrigerant. Contact a NISSAN dealer when servicing your air conditioner system. SPECIFICATIONS ENGINE Model Type Cylinder arrangement Bore x Stroke Displacement Firing order MR20DE Gasoline, 4-cycle, DOHC 4-cylinder, inline in (mm) 3.307 x 3.547 (84 x 90.1) cu in (cm3)121.86 (1,997) 1–3–4–2 Idle speed CVT (in “N” position) Ignition timing (degree B.T.D.C. at idle speed) CO % at idle Spark plug Spark plug gap (Nominal) Camshaft operation This spark ignition system complies with the Canadian standard ICES-002. No adjustment is necessary. FXE20HR-11 in (mm) 0.043 (1.1) Timing chain Technical and consumer information 9-7 WHEELS AND TIRES DIMENSIONS AND WEIGHTS Wheels Steel 15 x 5.5 JJ Offset 1.77in (45 mm) Tires 185/60R15C 94/92T Spare tire Full size 9-8 Technical and consumer information Overall length Overall width Overall height Front Track Rear Track Wheelbase in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) 186.3 (4,732.5) 68.1 (1,729.5) 73.7 (1,871.7) 60 (1,525) 59.8 (1,520) 115.2 (2,925) Gross vehicle weight rating Gross axle weight rating Front Rear lb (kg) See the “F.M.V.S. S./C.M.V.S.S. certification label” on the center pillar between the driver’s side front and rear doors. lb (kg) lb (kg) WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN ANOTHER COUNTRY VEHICLE IDENTIFICATION When planning to drive your NISSAN vehicle in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. Therefore, avoid taking your vehicle to areas where appropriate fuel is not available. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regulations for motor vehicle emission control and safety standards vary according to the country, state, province or district; therefore, vehicle specifications may differ. When any vehicle is to be taken into another country, state, province or district and registered, its modifications, transportation and registration are the responsibility of the user. NISSAN is not responsible for any inconvenience that may result. TI1050M VEHICLE IDENTIFICATION NUMBER (VIN) PLATE STI0466 ENGINE SERIAL NUMBER The number is stamped on the engine as shown. The VIN plate is attached as shown. This number is the identification for your vehicle and is used in the vehicle registration. Technical and consumer information 9-9 WTI0058 LTI2004 WTI0174 F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABEL EMISSION CONTROL INFORMATION LABEL TIRE AND LOADING INFORMATION LABEL The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certification label is affixed as shown. This label contains valuable vehicle information, such as: (GVWR), (GAWR), month and year of manufacture, (VIN), etc. Review it carefully. The emission control information label is attached to the underside of the hood as shown. The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. 9-10 Technical and consumer information INSTALLING FRONT LICENSE PLATE LDI2381 TIRE WARNING LABEL LTI2004 AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. LTI2064 Technical and consumer information 9-11 VEHICLE LOADING INFORMATION Use the following steps to mount the front license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag: ● License plate bracket ● License plate screws x 2 ● Screw grommets x 2 1 and make 1. Hold the license plate bracket 䊊 a shallow hole in the bumper fascia using a drill. To avoid damaging the area behind the fascia, apply only light pressure to the drill. 2 into the holes in the 2. Insert the grommets 䊊 bumper fascia. 3. Mount the license plate bracket using the 3 . two screws 䊊 4. Mount the front license plate. WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a seat belt properly. TERMS It is important to familiarize yourself with the following terms before loading your vehicle: ● Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and optional equipment, fluids, emergency tools, and spare tire assembly. This weight does not include passengers and cargo. 9-12 Technical and consumer information ● GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers and cargo. ● GVWR (Gross Vehicle Weight Rating) - maximum total combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equipment. This information is located on the F.M.V.S.S./C.M.V.S.S. certification label. ● GAWR (Gross Axle Weight Rating) maximum weight (load) limit specified for the front or rear axle. This information is located on the F.M.V.S.S./C.M.V.S.S. certification label. ● GCWR (Gross Combined Weight rating) - The maximum total weight rating of the vehicle, passengers, cargo, and trailer. ● Vehicle Capacity Weight, Load limit, Total load capacity - maximum total weight limit specified of the load (passengers and cargo) for the vehicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label. Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Information label. To get “the combined weight of occupants and cargo”, add the weight of all occupants, then add the total luggage weight. Examples are shown in the following illustration. ● Cargo capacity - permissible weight of cargo, the subtracted weight of occupants from the load limit. VEHICLE LOAD CAPACITY Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. Both the GVWR and GAWR are located on the F.M.V.S.S./C.M.V.S.S. certification label. Refer to “Measurement of weights” in this section. Technical and consumer information 9-13 Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX lbs or XXX kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the XXX amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400-750 (5 X 150) = 650 lbs) or (640-340 (5 X 70) = 300 kg.) LTI0152 Example 9-14 Technical and consumer information 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Before driving a loaded vehicle, confirm that you do not exceed the GVWR or the GAWR for your vehicle. For additional information, refer to “Measurement of weights” in this section. Also check tires for proper inflation pressures. For additional information, refer to the “Tire and Loading Information label” in the Maintenance and do-it-yourself” section of this manual. LIC2088 Cargo area D-Ring (if so equipped) SECURING THE LOAD There are 6 D-rings located in the cargo area as shown and can be used to secure cargo with ropes or other types of straps. ● The child restraint top tether strap may be damaged by contact with items in the cargo area. Secure any items in the cargo area. Your child could be seriously injured or killed in a collision if the top tether strap is damaged. ● Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury. Do not apply a total load of more than 1,124 lbs. (5,000 N) to a single D-ring when securing cargo. Technical and consumer information 9-15 TOWING A TRAILER LOADING TIPS ● The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR. WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. ● Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury. 9-16 Technical and consumer information ● Overloading and improper loading not only can shorten the life of your vehicle and the tire, but can also cause unsafe vehicle handling and longer braking distances. This may cause a premature tire failure which could result in a serious accident and personal injury. Failures caused by overloading are not covered by the vehicle’s warranty. MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the GAWR. The total of the axle loads should not exceed the GVWR. These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or remove items to bring all weights below the ratings. Do not tow a trailer with your vehicle. FLAT TOWING Towing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● Whenever flat towing your vehicle, always tow forward, never backward. ● DO NOT tow any continuously variable transmission vehicle with all four wheels on the ground (flat towing). Doing so WILL DAMAGE internal transmission parts due to lack of transmission lubrication. ● For emergency towing procedures refer to “Towing recommended by NISSAN” in the “In case of emergency” section of this manual. UNIFORM TIRE QUALITY GRADING Continuously Variable Transmission (CVT) To tow a vehicle equipped with a CVT, an appropriate vehicle dolly MUST be placed under the towed vehicle’s drive wheels. Always follow the dolly manufacturer’s recommendations when using their product. DOT (Department of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. Traction AA, A, B and C WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature A, B and C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat, and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Technical and consumer information 9-17 WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive loading, either separately or in combination, can cause heat build-up and possible tire failure. EMISSION CONTROL SYSTEM WARRANTY REPORTING SAFETY DEFECTS Your NISSAN vehicle is covered by the following emission warranties: For USA For USA 1. Emission Defects Warranty 2. Emissions Performance Warranty Details of this warranty may be found with other vehicle warranties in your Warranty Information Booklet which comes with your NISSAN vehicle. If you did not receive a Warranty Information Booklet, or it is lost, you may obtain a replacement by writing to: ● Nissan North America, Inc. Consumer Affairs Department P.O. Box 685003 Franklin, TN 37068-5003 For Canada Emission Control System Warranty Details of this warranty may be found with other vehicle warranties in your Warranty Information Booklet which comes with your NISSAN vehicle. If you did not receive a Warranty Information Booklet, or it is lost, you may obtain a replacement by writing to: ● Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario, L4W 4Z5 9-18 Technical and consumer information If you believe that your vehicle has a defect which could cause a collision or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or NISSAN. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov. READINESS FOR INSPECTION/ MAINTENANCE (I/M) TEST You may notify NISSAN by contacting our Consumer Affairs Department, toll-free, at 1-877-NIS-NCV1 (1-877-647-6281). For Canada If you believe that your vehicle has a defect which could cause a collision or could cause injury or death, you should immediately inform Transport Canada in addition to notifying NISSAN. If Transport Canada receives complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may request that NISSAN conduct a recall campaign. However, Transport Canada cannot become involved in individual problems between you, your dealer, or NISSAN. You may contact Transport Canada’s Defect Investigations and Recalls Division toll-free at 1-800-333-0510. You may also report safety defects online at: https://wwwapps.tc.gc.ca/Saf-Sec-Sur/ 7/PCDB-BDPP/fc-cp.aspx?lang=eng Additional information concerning motor vehicle safety may be obtained from Transport Canada’s Road Safety Information Centre at 1-800-333-0371 or online at www.tc.gc.ca/roadsafety (English speakers) or www.tc.gc.ca/securiteroutiere (French speakers). To notify NISSAN of any safety concerns please contact our Consumer Information Centre toll-free at 1-800-387-0122. Due to legal requirements in some states and Canadian Provinces, your vehicle may be required to be in what is called the “ready condition” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually, the ready condition can be obtained by ordinary usage of the vehicle. If a powertrain system component is repaired or the battery is disconnected, the vehicle may be reset to a “not ready” condition. Before taking the I/M test, check the vehicle’s inspection/maintenance test readiness condition. Place the ignition switch in the ON position without starting the engine. If the Malfunction Indicator Light (MIL) comes on steady for 20 seconds and then blinks for 10 seconds , the I/M test condition is “not ready”. If the MIL does not blink after 20 seconds, the I/M test condition is “ready”. Contact a NISSAN dealer to set the “ready condition” or to prepare the vehicle for testing. Technical and consumer information 9-19 EVENT DATA RECORDERS (EDR) This vehicle is equipped with an EDR. The main purpose of an EDR is to record, in certain collision or near collision-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: ● How various systems in your vehicle were operating; ● Whether or not the driver and passenger safety belts were buckled/fastened; ● How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, ● How fast the vehicle was traveling. ● Sounds are not recorded. These data can help provide a better understanding of the circumstances in which collisions and injuries occur. NOTE: EDR data are recorded by your vehicle only if a nontrivial collision situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g. name, gender, age and collision location) are recorded. However, other parties, such as law enforcement, could combine the EDR data 9-20 Technical and consumer information OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION with the type of personally identifying data routinely acquired during a collision investigation. To read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer and NISSAN dealer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. EDR data will only be accessed with the consent of the vehicle owner or lessee or as otherwise required or permitted by law. Genuine NISSAN Service Manuals for this model year and prior can be purchased. A Genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factorytrained technicians working at NISSAN dealerships. Genuine NISSAN Owner’s Manuals can also be purchased. For USA For current pricing and availability of Genuine NISSAN Service Manuals, contact: www.nissan-techinfo.com For current pricing and availability of Genuine NISSAN Owner’s Manuals, contact: 1-800-247-5321 For Canada To purchase a copy of a Genuine NISSAN Service Manual or Owner’s Manual, for this model year and prior, please contact your nearest NISSAN dealer. For the phone number and location of a NISSAN dealer in your area, call the NISSAN Information Center at 1-800-387-0122 and a bilingual NISSAN representative will assist you. 10 Index A ABS (Anti-lock Braking System). . . . . . . .5-22 Air bag (See supplemental restraint system) . . . . . . . . . . . . . . . . . . . . .1-30 Air bag system Front (See supplemental front impact air bag system) . . . . . . . . . . . . . . .1-37 Air bag warning labels . . . . . . . . . . . . .1-47 Air bag warning light. . . . . . . . . . .1-47, 2-13 Air bag warning light, supplemental . .1-47, 2-13 Air cleaner housing filter . . . . . . . . . . . .8-17 Air conditioner Air conditioner operation . . . . . . . . . .4-16 Air conditioner service . . . . . . . . . . .4-21 Air conditioner specification label . . . . .9-11 Air conditioner system refrigerant and oil recommendations . . . . . . . . . . . . .9-6 Air conditioner system refrigerant recommendations . . . . . . . . . . . . . .9-6 Heater and air conditioner controls . . . .4-13 Servicing air conditioner . . . . . . . . . .4-21 Air flow charts. . . . . . . . . . . . . . . . . .4-17 Anchor point locations . . . . . . . . . . . . .1-22 Antenna . . . . . . . . . . . . . . . . . . . . .4-51 Anti-lock brake warning light . . . . . . . . . .2-9 Anti-lock Braking System (ABS). . . . . . . .5-22 Apps . . . . . . . . . . . . . . . . . . . . . . .4-51 Audible reminders . . . . . . . . . . . . . . .2-15 Audio system . . . . . . . . . . . . . . . . . .4-21 AM-FM radio with compact disc (CD) player . . . . . . . . . . . . . . . . . . . .4-29 AM radio reception . . . . . . . . . . . . .4-22 Bluetooth® audio. . . . . . . . . . . . . .4-48 Bluetooth® streaming audio . . . . . . . .4-48 Compact disc (CD) player . .4-31, 4-35, 4-42 FM/AM radio with compact disc (CD) player . . . . . . . . . . . . . . . . .4-29, 4-33 FM/AM/SAT radio with compact disc (CD) player . . . . . . . . . . . . . . . . . . . .4-37 FM radio reception . . . . . . . . . . . . .4-21 iPod® Player . . . . . . . . . . . . . . . .4-45 iPod® player operation. . . . . . . . . . .4-45 Radio . . . . . . . . . . . . . . . . . . . .4-21 Steering wheel audio control switch . . .4-50 USB interface . . . . . . . . . . . . . . . .4-43 USB (Universal Serial Bus) Connection Port . . . . . . . . . . . . . . . . . . . . .4-43 Automatic Automatic power window switch . . . . .2-28 Automatic door locks . . . . . . . . . . . . . .3-9 AUX jack. . . . . . . . . . . . . .4-32, 4-36, 4-43 Booster seats . . . . . . . . . . . . . . . . . .1-26 Brake Anti-lock Braking System (ABS). . . . . .5-22 Brake fluid . . . . . . . . . . . . . . . . . .8-12 Brake light (See stop light). . . . . . . . .8-29 Brake system . . . . . . . . . . . . . . . .5-21 Brake warning light. . . . . . . . . . . . . .2-9 Brake wear indicators . . . . . . . .2-15, 8-19 Parking brake operation . . . . . . . . . .5-15 Self-adjusting brakes . . . . . . . . . . . .8-19 Brake fluid . . . . . . . . . . . . . . . . . . . .8-12 Brakes . . . . . . . . . . . . . . . . . . . . . .8-19 Brake system . . . . . . . . . . . . . . . . . .5-21 Break-in schedule . . . . . . . . . . . . . . .5-17 Brightness/contrast button . . . . . . . . . . .4-7 Brightness control Instrument panel . . . . . . . . . . . . . .2-21 Bulb check/instrument panel . . . . . . . . . .2-9 Bulb replacement . . . . . . . . . . . . . . . .8-29 C B Battery . . . . . . . . . . . . . . . . . .5-27, 8-13 Charge warning light . . . . . . . . . . . .2-10 Battery replacement Key fob . . . . . . . . . . . . . . . . . . .8-23 Before starting the engine . . . . . . . . . . . .5-9 Belt (See drive belt) . . . . . . . . . . . . . .8-16 Bluetooth® audio. . . . . . . . . . . . . . . .4-48 Bluetooth® hands-free phone system . . . . . . . . . . . . . . . . . .4-53, 4-68 Capacities and recommended fuel/lubricants. . . . . . . . . . . . . . . . . . .9-2 Cargo (See vehicle loading information) . . .9-12 Car phone or CB radio . . . . . . . . . . . . .4-52 CD care and cleaning . . . . . . . . . . . . .4-50 CD player (See audio system) . .4-31, 4-35, 4-42 Child restraints . . . . . . . . . .1-18, 1-19, 1-20 Precautions on child restraints. . . . . . . . . . . .1-20, 1-22, 1-26 Top tether strap anchor point locations . .1-22 Child restraint with top tether strap. . . . . . .1-21 Chimes, audible reminders . . . . . . . . . . .2-15 Cleaning exterior and interior . . . . . . . . . . .7-2 Clock . . . . . . . . . . . . . . . . . . .4-30, 4-34 Clock set/adjustment . . . . . . . .4-5, 4-30, 4-34 C.M.V.S.S. certification label . . . . . . . . . .9-10 Cold weather driving. . . . . . . . . . . . . . .5-27 Compact disc (CD) player . . . .4-31, 4-35, 4-42 Continuously Variable Transmission (CVT). . .5-11 Continuously Variable Transmission (CVT) fluid . . . . . . . . . . . . . . . . . . . . . .8-11 Driving with Continuously Variable Transmission (CVT) . . . . . . . . . . . . .5-11 Control panel buttons . . . . . . . . . . . . . . .4-2 Brightness/contrast button . . . . . . . . . .4-7 Enter button . . . . . . . . . . . . . . . . . .4-2 Setting button . . . . . . . . . . . . . . . . .4-5 Controls Audio controls (steering wheel). . . . . . .4-50 Heater and air conditioner controls. . . . .4-13 Coolant Capacities and recommended fuel/lubricants . . . . . . . . . . . . . . . . .9-2 Changing engine coolant . . . . . . . . . . .8-8 Checking engine coolant level . . . . . . . .8-8 Corrosion protection . . . . . . . . . . . . . . .7-5 Cruise control . . . . . . . . . . . . . . . . . .5-16 Cup holders . . . . . . . . . . . . . . . . . . .2-25 D Daytime light system. . . . . . . . . . . . . . .2-20 Defroster switch Rear window and outside mirror defroster switch. . . . . . . . . . . . . . . . . . . . .2-19 10-2 Dimensions and weights . . . . . . . . . . . . .9-8 Dimmer switch for instrument panel . . . . . .2-21 Display controls (see control panel buttons) . .4-2 Door locks . . . . . . . . . . . . . . . . . . . . .3-3 Door open warning light . . . . . . . . . . . . .2-10 Doors. . . . . . . . . . . . . . . . . . . . . . . .3-3 D-ring . . . . . . . . . . . . . . . . . . .2-26, 9-15 Drive belt . . . . . . . . . . . . . . . . . . . . .8-16 Driving Cold weather driving. . . . . . . . . . . . .5-27 Driving with Continuously Variable Transmission (CVT) . . . . . . . . . . . . .5-11 Precautions when starting and driving . . . .5-2 E Economy - fuel . . . . . . . . . . . . . . . . . Emission control information label . . . . . . Emission control system warranty . . . . . . Engine Before starting the engine . . . . . . . . Capacities and recommended fuel/lubricants . . . . . . . . . . . . . . . Changing engine coolant . . . . . . . . . Changing engine oil . . . . . . . . . . . . Changing engine oil filter . . . . . . . . . Checking engine coolant level . . . . . . Checking engine oil level . . . . . . . . . Engine compartment check locations . . Engine cooling system . . . . . . . . . . Engine oil . . . . . . . . . . . . . . . . . Engine oil and oil filter recommendation . Engine oil pressure warning light . . . . . Engine oil viscosity . . . . . . . . . . . . Engine serial number . . . . . . . . . . . .5-19 .9-10 .9-18 . .5-9 . .9-2 . .8-8 .8-10 .8-11 . .8-8 . .8-9 . .8-6 . .8-7 . .8-9 . .9-5 .2-10 . .9-5 . .9-9 Engine specifications . . . . . Starting the engine . . . . . . Enter button . . . . . . . . . . . . Event data recorders . . . . . . . Exhaust gas (Carbon monoxide) . Explanation of maintenance items Extended storage switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-7 . .5-9 . .4-2 .9-20 . .5-2 . .8-2 .8-22 F Flashers (See hazard warning flasher switch) . .6-2 Flat tire . . . . . . . . . . . . . . . . . . . . . . .6-2 Floor mat positioning aid . . . . . . . . . . . . .7-5 Fluid Brake fluid . . . . . . . . . . . . . . . . . .8-12 Capacities and recommended fuel/lubricants . . . . . . . . . . . . . . . . .9-2 Continuously Variable Transmission (CVT) fluid . . . . . . . . . . . . . . . . . . . . . .8-11 Engine coolant. . . . . . . . . . . . . . . . .8-7 Engine oil . . . . . . . . . . . . . . . . . . .8-9 Windshield-washer fluid. . . . . . . . . . .8-12 F.M.V.S.S. certification label. . . . . . . . . . .9-10 Front air bag system (See supplemental restraint system) . . . . . .1-37 Front seats . . . . . . . . . . . . . . . . . . . . .1-2 Fuel Capacities and recommended fuel/lubricants . . . . . . . . . . . . . . . . .9-2 Fuel economy . . . . . . . . . . . . . . . .5-19 Fuel-filler door and cap . . . . . . . . . . .3-14 Fuel-filler door lock opener lever . . . . . .3-14 Fuel gauge . . . . . . . . . . . . . . . . . . .2-6 Fuel octane rating . . . . . . . . . . . . . . .9-4 Fuel recommendation . . . . . . . . . . . . .9-3 Loose fuel cap warning . . . . . . . .2-4, 3-14 Fuel gauge . . . . . . . . . . . . . . . . . . . . .2-6 Fuses . . . . . . . . . . . . . . . . . . . . . . .8-20 Fusible links . . . . . . . . . . . . . . . . . . .8-21 G Gas cap . . . . . . . Gauge Fuel gauge . . . . Odometer . . . . Speedometer . . Tachometer . . . Trip computer . . Trip odometer . . General maintenance Glove box. . . . . . . Glove box lock . . . . . . . . . . . . . . . . . .3-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 . .2-4 . .2-3 . .2-5 . .2-6 . .2-4 . .8-2 .2-25 .2-25 I Ignition switch . . . . . . . . . . . . . . . . . . .5-7 Immobilizer system . . . . . . . . . .2-17, 3-2, 5-8 Important vehicle information label . . . . . . .9-10 Increasing fuel economy. . . . . . . . . . . . .5-19 Indicator lights and audible reminders (See warning/indicator lights and audible reminders) . . . . . . . . . . . . . . . . . . . . .2-8 Inside mirror . . . . . . . . . . . . . . . . . . .3-17 Instrument brightness control . . . . . . . . . .2-21 Instrument panel . . . . . . . . . . . . . . .0-6, 2-2 Instrument panel dimmer switch . . . . . . . .2-21 Interior light . . . . . . . . . . . . . . . .2-29, 2-30 iPod® Player . . . . . . . . . . . . . . . . . . .4-45 J Jump starting . . . . . . . . . . . . . . . .6-9, 8-15 H Hands-free phone system, Bluetooth® . . . . . . . . . . . . . . . .4-53, 4-68 Hazard warning flasher switch . . . . . . . . . .6-2 Headlight and turn signal switch . . . . . . . .2-19 Headlight control switch . . . . . . . . . . . .2-19 Headlights . . . . . . . . . . . . . . . . . . . .8-25 Head restraints . . . . . . . . . . . . . . . . . .1-7 Heater Heater and air conditioner controls. . . . .4-13 Heater operation . . . . . . . . . . . . . . .4-15 Hood release . . . . . . . . . . . . . . . . . . .3-13 Horn . . . . . . . . . . . . . . . . . . . . . . .2-22 K Key . . . . . . . . . . . . . . . . . . . . . . . . .3-2 Key fob battery replacement . . . . . . . . . .8-23 L Label Tire warning . . . . . . . . . . . . Labels Air conditioner specification label C.M.V.S.S. certification label . . . Emission control information label . . . . .9-11 . . . . .9-11 . . . . .9-10 . . . . .9-10 Engine serial number . . . . . . . . . . . . .9-9 F.M.V.S.S. certification label. . . . . . . . .9-10 Tire and Loading Information label . . . . .9-10 Vehicle identification number (VIN) plate . .9-9 Warning labels (for SRS) . . . . . . . . . .1-47 Light Air bag warning light . . . . . . . . .1-47, 2-13 Brake light (See stop light) . . . . . . . . .8-29 Bulb check/instrument panel . . . . . . . . .2-9 Bulb replacement . . . . . . . . . . . . . .8-29 Charge warning light . . . . . . . . . . . .2-10 Headlight and turn signal switch . . . . . .2-19 Headlight control switch . . . . . . . . . .2-19 Headlights . . . . . . . . . . . . . . . . . .8-25 Interior light . . . . . . . . . . . . . .2-29, 2-30 Light bulbs . . . . . . . . . . . . . . . . . .8-25 Low tire pressure warning light . . . . . . .2-10 Low windshield-washer fluid warning light . . . . . . . . . . . . . . . . . . . . . .2-12 Passenger air bag and status light . . . . .1-38 Security indicator light. . . . . . . . . . . .2-14 Warning/indicator lights and audible reminders . . . . . . . . . . . . . . . . . . .2-8 Lights Map lights . . . . . . . . . . . . . . . . . .2-29 Lock Door locks . . . . . . . . . . . . . . . . . . .3-3 Fuel-filler door lock opener lever . . . . . .3-14 Glove box lock . . . . . . . . . . . . . . . .2-25 Power door locks . . . . . . . . . . . . . . .3-6 Rear door lock . . . . . . . . . . . . . . . . .3-7 Loose fuel cap warning . . . . . . . . . .2-4, 3-14 Low fuel warning light . . . . . . . . . . . . . .2-10 Low tire pressure warning light . . . . . . . . .2-10 Low windshield-washer fluid warning light. . .2-12 Luggage (See vehicle loading information) . .9-12 10-3 Oil M Maintenance General maintenance . . . . . Inside the vehicle . . . . . . . Maintenance precautions . . . Outside the vehicle . . . . . . Seat belt maintenance. . . . . Under the hood and vehicle . Maintenance requirements . . . . Malfunction indicator light . . . . . Manual front seat adjustment . . . Map lights . . . . . . . . . . . . . Map pocket. . . . . . . . . . . . . Meters and gauges . . . . . . . . Instrument brightness control . Mirror Inside mirror . . . . . . . . . . Outside mirrors . . . . . . . . Mirrors . . . . . . . . . . . . . . . Mobile apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2 . .8-3 . .8-5 . .8-2 .1-17 . .8-4 . .8-2 .2-13 . .1-2 .2-29 .2-24 . .2-3 .2-21 . . . . . . . . . . . . . . . . . . . . . . . . .3-17 .3-17 .3-17 .4-51 N NissanConnectSM . . . . . . . . . . . . . . . .4-51 NISSAN vehicle immobilizer system . . . . . . . . . . . . . . . . .2-17, 3-2, 5-8 NISSAN voice recognition system . . . . . . .4-75 O Octane rating (See fuel octane rating). . . . . .9-4 Odometer . . . . . . . . . . . . . . . . . . . . .2-4 10-4 Capacities and recommended fuel/lubricants . . . . . . . . . . . . . . . . .9-2 Changing engine oil . . . . . . . . . . . . .8-10 Changing engine oil filter . . . . . . . . . .8-11 Checking engine oil level . . . . . . . . . . .8-9 Engine oil . . . . . . . . . . . . . . . . . . .8-9 Engine oil and oil filter recommendation . . .9-5 Engine oil viscosity . . . . . . . . . . . . . .9-5 One shot call . . . . . . . . . . . . . . .4-57, 4-70 Outside mirrors . . . . . . . . . . . . . . . . .3-17 Overheat If your vehicle overheats . . . . . . . . . . .6-11 Owner’s manual order form . . . . . . . . . . .9-20 Owner’s manual/service manual order information . . . . . . . . . . . . . . . . . . . .9-20 P Parking Parking brake operation . . . . . . . . . . .5-15 Parking/parking on hills . . . . . . . . . . .5-20 Phone, Bluetooth® hands-free system . . . . . . . . . . . . . . . . . . .4-53, 4-68 Power Power door locks . . . . . . . . . . . . . . .3-6 Power outlet . . . . . . . . . . . . . . . . .2-23 Power steering system . . . . . . . . . . .5-21 Power outlet . . . . . . . . . . . . . . . . . . .2-23 Power steering . . . . . . . . . . . . . . . . . .5-21 Precautions Maintenance precautions . . . . . . . . . . .8-5 Precautions on booster seats . . . . . . . . . . . . . .1-20, 1-22, 1-26 Precautions on child restraints . . . . . . . . . . . .1-20, 1-22, 1-26 Precautions on seat belt usage . . . . . . .1-11 Precautions on supplemental restraint system . . . . . . . . . . . . . . . . . . . .1-30 Precautions when starting and driving . . . .5-2 Programmable features . . . . . . . . . . . . . .4-5 Push starting . . . . . . . . . . . . . . . . . . .6-11 R Radio AM-FM radio with compact disc (CD) player . . . . . . . . . . . . . . . . . . . . .4-29 Car phone or CB radio . . . . . . . . . . .4-52 FM/AM radio with compact disc (CD) player . . . . . . . . . . . . . . . . .4-29, 4-33 FM/AM/SAT radio with compact disc (CD) player . . . . . . . . . . . . . . . . . . . . .4-37 Steering wheel audio control switch . . . .4-50 Readiness for inspection maintenance (I/M) test . . . . . . . . . . . . . . . . . . . . . . . .9-19 Rear door . . . . . . . . . . . . . . . . . . . . .3-7 Rear door lock . . . . . . . . . . . . . . . . . . .3-7 Rear sonar system . . . . . . . . . . . . . . . .5-26 Rear sonar system off switch . . . . . . . . . .2-22 RearView Monitor . . . . . . . . . . .4-8, 4-9, 4-11 Rear window and outside mirror defroster switch. . . . . . . . . . . . . . . . . . . . . . .2-19 Recorders Event data . . . . . . . . . . . . . . . . . .9-20 Refrigerant recommendation . . . . . . . . . . .9-6 Registering your vehicle in another country . . .9-9 Reporting safety defects (US only) . . . . . . .9-18 S Safety Child seat belts . . . . . . . .1-20, 1-22, 1-26 Reporting safety defects (US only) . . . . .9-18 Seat adjustment Front manual seat adjustment . . . . . . . .1-2 Seat belt Child safety. . . . . . . . . . . . . . . . . .1-18 Infants and small children . . . . . . . . . .1-19 Injured Person . . . . . . . . . . . . . . . .1-14 Larger children . . . . . . . . . . . . . . . .1-19 Precautions on seat belt usage . . . . . . .1-11 Pregnant women . . . . . . . . . . . . . . .1-14 Seat belt extenders . . . . . . . . . . . . .1-17 Seat belt maintenance. . . . . . . . . . . .1-17 Seat belts. . . . . . . . . . . . . . . . . . .1-11 Shoulder belt height adjustment . . . . . .1-17 Three-point type with retractor . . . . . . .1-14 Seat belt extenders . . . . . . . . . . . . . . .1-17 Seat belt warning light . . . . . . . . . .1-14, 2-12 Seats Adjustment. . . . . . . . . . . . . . . . . . .1-2 Front seats . . . . . . . . . . . . . . . . . . .1-2 Manual front seat adjustment . . . . . . . . .1-2 Security indicator light. . . . . . . . . . . . . .2-14 Security system (NISSAN vehicle immobilizer system), engine start . . . . . . . . .2-17, 3-2, 5-8 Self-adjusting brakes . . . . . . . . . . . . . .8-19 Service manual order form . . . . . . . . . . .9-20 Servicing air conditioner. . . . . . . . . . . . .4-21 Setting button . . . . . . . . . . . . . . . . . . .4-5 Shifting Continuously Variable Transmission (CVT) . . . . . . . . . . . . . . . . . . . . .5-12 Shoulder belt height adjustment . . . . . . . .1-17 Sliding door Manual sliding door . . . . . . . . . . . . . .3-6 Smartphone connectivity . . . . . . . . . . . .4-51 Sonar Rear system . . . . . . . . . . . . . . . . .5-26 Spark plug replacement . . . . . . . . . . . . .8-16 Spark plugs . . . . . . . . . . . . . . . . . . .8-16 Specifications . . . . . . . . . . . . . . . . . . .9-7 Speedometer . . . . . . . . . . . . . . . . . . .2-3 SRS warning label . . . . . . . . . . . . . . . .1-47 Stability control . . . . . . . . . . . . . . . . .5-23 Starting Before starting the engine . . . . . . . . . .5-9 Jump starting . . . . . . . . . . . . . .6-9, 8-15 Precautions when starting and driving . . . .5-2 Push starting . . . . . . . . . . . . . . . . .6-11 Starting the engine . . . . . . . . . . . . . .5-9 Starting the engine . . . . . . . . . . . . . . . .5-9 Steering Power steering system . . . . . . . . . . .5-21 Steering wheel audio control switch . . . . . .4-50 Stop light . . . . . . . . . . . . . . . . . . . . .8-29 Storage . . . . . . . . . . . . . . . . . . . . . .2-24 D-ring . . . . . . . . . . . . . . . . . . . . .2-26 Storage tray . . . . . . . . . . . . . . . .2-24, 2-25 Sun visors . . . . . . . . . . . . . . . . . . . .3-16 Supplemental air bag warning labels . . . . . .1-47 Supplemental air bag warning light . . .1-47, 2-13 Supplemental front impact air bag system . . .1-37 Supplemental restraint system Information and warning labels . . . . . . .1-47 Precautions on supplemental restraint system . . . . . . . . . . . . . . . . . . . .1-30 Supplemental restraint system (Supplemental air bag system) . . . . . . . . .1-30 Switch Automatic power window switch . . . . . .2-28 Hazard warning flasher switch . . . . . . . .6-2 Headlight and turn signal switch . . . . . .2-19 Headlight control switch . . . . . . . . . .2-19 Ignition switch . . . . . . . . . . . . . . . . .5-7 Instrument brightness control . . . . . . . .2-21 Power door lock switch . . . . . . . . . . . .3-6 Rear sonar system off switch . . . . . . . .2-22 Rear window and outside mirror defroster switch. . . . . . . . . . . . . . . . . . . . .2-19 Turn signal switch . . . . . . . . . . . . . .2-21 Vehicle dynamic control (VDC) off switch. . . . . . . . . . . . . . . . . . . . .2-22 Windshield wiper and washer switch . . .2-18 T Tachometer . . . . . . . . . . . . . . . . . . . .2-5 Theft (NISSAN vehicle immobilizer system), engine start . . . . . . . . . . . . . .2-17, 3-2, 5-8 Three-way catalyst . . . . . . . . . . . . . . . .5-2 Tire Flat tire . . . . . . . . . . . . . . . . . . . . .6-2 Spare tire . . . . . . . . . . . . . . . . . . .6-4 Tire and Loading Information label . . . . .9-10 Tire chains . . . . . . . . . . . . . . . . . .8-39 Tire pressure . . . . . . . . . . . . . . . . .8-32 Tire rotation. . . . . . . . . . . . . . . . . .8-39 Types of tires . . . . . . . . . . . . . . . . .8-38 Uniform tire quality grading . . . . . . . . .9-17 Wheels and tires . . . . . . . . . . . . . . .8-32 Wheel/tire size. . . . . . . . . . . . . . . . .9-8 Tire pressure Low tire pressure warning light . . . . . . .2-10 10-5 Tire Pressure Monitoring System (TPMS) . . . .5-3 Tire warning label . . . . . . . . . . . . . . . .9-11 Top tether strap child restraint . . . . . . . . .1-21 Towing Flat towing . . . . . . . . . . . . . . . . . .9-16 Tow truck towing. . . . . . . . . . . . . . .6-12 Trailer towing . . . . . . . . . . . . . . . . .9-16 Towing a trailer . . . . . . . . . . . . . . . . . .9-16 Transmission Continuously Variable Transmission (CVT) fluid . . . . . . . . . . . . . . . . . . . . . .8-11 Driving with Continuously Variable Transmission (CVT) . . . . . . . . . . . . .5-11 Travel (See registering your vehicle in another country) . . . . . . . . . . . . . . . . . . . . . .9-9 Trip computer . . . . . . . . . . . . . . . . . . .2-6 Trip odometer . . . . . . . . . . . . . . . . . . .2-4 Troubleshooting guide (NISSAN voice recognition system) . . . . . .4-79 Turn signal switch . . . . . . . . . . . . . . . .2-21 U Uniform tire quality grading . . . . . . . . . . .9-17 USB interface . . . . . . . . . . . . . . . . . .4-43 Audio file operation . . . . . . . . . . . . .4-44 V Variable voltage control system . . . . . . . Vehicle dimensions and weights . . . . . . Vehicle dynamic control (VDC) off switch . Vehicle dynamic control (VDC) system. . . Vehicle Dynamic Control (VDC) system . . 10-6 . . . . . .8-16 . .9-8 .2-22 .5-23 .5-23 Vehicle identification . . . . . . . . . . . . . . .9-9 Vehicle identification number (VIN) plate . . . .9-9 Vehicle immobilizer system . . . . . .2-17, 3-2, 5-8 Vehicle loading information . . . . . . . . . . .9-12 Vehicle recovery . . . . . . . . . . . . . . . . .6-14 Vehicle security system (NISSAN vehicle immobilizer system), engine start . . . . . .2-17, 3-2, 5-8 Ventilators . . . . . . . . . . . . . . . . . . . .4-12 Visors . . . . . . . . . . . . . . . . . . . . . . .3-16 Voice Prompt Interrupt . . . . . . . . . .4-57, 4-70 Voice recognition system . . . . . . . . . . . .4-75 W Warning Air bag warning light . . . . . . . . .1-47, 2-13 Anti-lock brake warning light . . . . . . . . .2-9 Battery charge warning light . . . . . . . .2-10 Brake warning light . . . . . . . . . . . . . .2-9 Door open warning light . . . . . . . . . . .2-10 Engine oil pressure warning light . . . . . .2-10 Hazard warning flasher switch . . . . . . . .6-2 Loose fuel cap warning . . . . . . . .2-4, 3-14 Low fuel warning light . . . . . . . . . . . .2-10 Low tire pressure warning light . . . . . . .2-10 Low windshield-washer fluid warning light . . . . . . . . . . . . . . . . . . . . . .2-12 Passenger air bag and status light . . . . .1-38 Seat belt warning light . . . . . . . .1-14, 2-12 Supplemental air bag warning light . . . . . . . . . . . . . . . . . .1-47, 2-13 Warning/indicator lights and audible reminders . . . . . . . . . . . . . . . . . . .2-8 Warning labels (for SRS) . . . . . . . . . .1-47 Warning/indicator lights and audible reminders . . . . . . . . . . . . . . . . . . . Audible reminders . . . . . . . . . . . . . Indicator lights . . . . . . . . . . . . . . . Warning lights . . . . . . . . . . . . . . . Warning lights . . . . . . . . . . . . . . . . . Washer switch Windshield wiper and washer switch . . Weights (See dimensions and weights) . . . Wheels and tires . . . . . . . . . . . . . . . . Wheel/tire size. . . . . . . . . . . . . . . . . When traveling or registering your vehicle in another country . . . . . . . . . . . . . . . . Windows . . . . . . . . . . . . . . . . . . . . Locking passengers’ windows . . . . . . Windshield-washer fluid. . . . . . . . . . . . Windshield wiper and washer switch . . . . Windshield wiper blades . . . . . . . . . . . Wiper Windshield wiper and washer switch . . Wiper blades. . . . . . . . . . . . . . . . . . . . . .2-8 .2-8 .2-8 .2-8 .2-8 .2-18 . .9-8 .8-32 . .9-8 . .9-9 .2-26 .2-27 .8-12 .2-18 .8-18 .2-18 .8-18 GAS STATION INFORMATION RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst. ● Do not use E-15 or E-85 fuel in your vehicle. Your vehicle is not designed to run on E-15 or E-85 fuel. Using E-15 or E-85 fuel in a vehicle not specifically designed for E-15 or E-85 fuel can adversely affect the emission control devices and systems of the vehicle. Damage caused by such fuel is not covered by the NISSAN new vehicle limited warranty. ● U.S. government regulations require ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region. For additional information, refer to “Recommended fluids/lubricants and capacities” in the “Technical and consumer information” section of this manual. ENGINE OIL RECOMMENDATION: ● Engine oil with API Certification Mark ● Viscosity SAE 5W-30 For additional information, refer to “Engine oil and oil filter recommendations” in the “Technical and consumer information” section of this manual. COLD TIRE PRESSURE: Refer to the Tire and loading information label. The label is typically located on the driver side center pillar or on the driver’s door. For additional information, refer to “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. RECOMMENDED NEW VEHICLE BREAK-IN PROCEDURE: During the first 1,200 mi (2,000 km) of vehicle use, follow the break-in procedure recommendations for the future reliability and economy of your new vehicle. For additional information, refer to “Break-in schedule” in the “Starting and driving” section of this manual. Follow these recommendations for the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in vehicle damage or shortened engine life. Printing : November 2014 Publication No.: OM15EM 0M20U1 Printed in U.S.A. M20-D