Mercedes - C 200 - Owners Manual - 2012 - 2012

C-Class Operator's Manual Symbols Registered trademarks: is a registered trademark of the Siemens Automotive Corp. RBluetooth® is a registered trademark of the Bluetooth SIG Inc. RDTS is a registered trademark of DTS, Inc. RDolby and MLP are registered trademarks of Dolby Laboratories. RESP® and PRE-SAFE® are registered trademarks of Daimler AG. RHomeLink® is a registered trademark of Prince, a Johnson Controls Company. RiPod® and iTunes® are registered trademarks of Apple Inc., registered in the USA and in other countries. RLogic 7® is a registered trademark of Harman International Industries, Incorporated. RMicrosoft® is a registered trademark of the Microsoft Corporation in the USA and in other countries. RSIRIUS and associated brands are registered trademarks of SIRIUS XM Radio Inc. RHD Radio and associated brands are registered trademarks of the iBiquity Digital Corporation. RWindows Media® is a registered trademark of the Microsoft Corporation in the USA and in other countries. RGracenote® is a registered trademark of Gracenote, Inc. RZagatSurvey® and associated brands are registered trademarks of Zagat. In this Operator's Manual, you will find the following symbols: ! These warning notes draw your attention to hazards that could cause damage to your vehicle. RBabySmart™ G WARNING Warning notes draw your attention to hazards that endanger your health or life, or the health or life of others. i This symbol indicates useful instructions or further information that could be helpful to you. X This symbol designates an instruction you must follow. Several consecutive symbols X indicate an instruction with several steps. Y Page This symbol tells you where you can find further information on a topic. This symbol indicates a warning or YY an instruction that is continued on the next page. Display This font indicates a display message in the multifunction display/COMAND display. Parts of the software in the vehicle are subject to copyright according to © 2005 The FreeType Project http://www.freetype.org. All rights reserved. Welcome to the world of Mercedes-Benz Before you drive off, please familiarize yourself with your vehicle and read this manual, especially the safety and warning notes. This will help you to obtain the maximum pleasure from your vehicle and avoid endangering yourself and others. The equipment or model designation of your vehicle may differ according to: Rmodel Rorder Rcountry variant Ravailability Mercedes-Benz is constantly updating its vehicles to the state of the art. Mercedes-Benz therefore reserves the right to introduce changes in the following areas: Rdesign Requipment Rtechnical features Therefore, you cannot base any claims on the illustrations or text content in this Operator's Manual. The following are integral components of the vehicle: ROperator's Manual Booklet REquipment-dependent supplements Keep these documents in the vehicle at all times. When you sell the vehicle, always pass the documents on to the new owner. The technical documentation team at Daimler AG wishes you safe and pleasant motoring. Mercedes-Benz USA, LLC Mercedes-Benz Canada, Inc. A Daimler Company RService 2045843582 É2045843582ÇËÍ Contents Index ....................................................... 4 At a glance ........................................... 27 Introduction ......................................... 21 Safety ................................................... 35 Opening/closing ................................. 69 Seats, steering wheel and mirrors .... 91 Lights and windshield wipers .......... 105 Climate control ................................. 121 Driving and parking .......................... 135 On-board computer and displays .... 193 Stowing and features ....................... 253 Maintenance and care ...................... 277 Breakdown assistance ..................... 291 Wheels and tires ............................... 309 Technical data ................................... 341 3 4 Index 1, 2, 3 ... 115 V socket ...................................... 263 12 V socket see Sockets 4ETS see ETS/4ETS (Electronic Traction System) 4MATIC (permanent four-wheel drive) .................................................. 175 4MATIC off-road system ................... 175 A ABS (Anti-lock Braking System) Display message ............................ 214 Function/notes ................................ 59 Important safety notes .................... 59 Warning lamp ................................. 242 Activating/deactivating cooling with air dehumidification ................. 126 Active Blind Spot Assist Activating/deactivating (onboard computer) ............................ 205 Function/information .................... 187 Active Driving Assistance package . 187 Active Lane Keeping Assist Activating/deactivating (onboard computer) ............................ 205 Display message ............................ 229 Function/information .................... 190 Active light function ......................... 110 Active Light System Display message ............................ 224 Active service system PLUS see ASSYST PLUS service interval display ADAPTIVE BRAKE ................................. 64 Adaptive Highbeam Assist Display message ............................ 225 Function/notes ............................. 110 Switching on/off (on-board computer) ...................................... 207 Additives (engine oil) ........................ 349 Air bags Display message ............................ 221 Front air bag (driver, front passenger) ....................................... 39 Important safety notes .................... 38 Knee bag .......................................... 40 PASSENGER AIR BAG OFF indicator lamp .................................. 42 Pelvis air bag ................................... 41 Safety guidelines ............................. 37 Side impact air bag .......................... 40 Window curtain air bag .................... 42 Air-conditioning system see Climate control AIR FLOW ........................................... 127 Air pressure see Tire pressure Air vents Glove box ....................................... 132 Important safety notes .................. 131 Rear ............................................... 133 Setting ........................................... 131 Setting the center air vents ........... 132 Setting the side air vents ............... 132 Alarm system see ATA (Anti-Theft Alarm system) Alertness Assistant see ATTENTION ASSIST AMG menu (on-board computer) ..... 210 Anti-lock Braking System see ABS (Anti-lock Braking System) Anti-Theft Alarm system see ATA (Anti-Theft Alarm system) Ashtray ............................................... 262 Assistance menu (on-board computer) .......................................... 204 ASSYST PLUS see ASSYST PLUS service interval display ATA (Anti-Theft Alarm system) Activating/deactivating ................... 67 Function ........................................... 67 Switching off the alarm .................... 67 ATTENTION ASSIST Activating/deactivating ................. 205 Display message ............................ 228 Function/notes ............................. 182 Audio menu (on-board computer) .... 201 Audio system see separate operating instructions Index Authorized Mercedes-Benz Center see Qualified specialist workshop AUTO lights Display message ............................ see Lights Automatic headlamp mode .............. Automatic transmission Automatic drive program ............... Changing gear ............................... Display message ............................ Driving tips .................................... Emergency running mode .............. Kickdown ....................................... Manual drive program .................... Problem (malfunction) ................... Program selector button ................ Pulling away ................................... Releasing the parking lock manually ........................................ Selector lever ................................ Shift ranges ................................... Starting the engine ........................ Steering wheel paddle shifters ...... Transmission position display ........ Transmission positions .................. Automatic transmission emergency mode ............................... 225 108 146 144 236 144 149 144 147 149 144 139 149 142 146 139 145 143 143 149 B Back support see Lumbar support Backup lamp Changing bulbs .............................. 116 Display message ............................ 224 Bag hook ............................................ 258 BAS (Brake Assist System) ................. 59 Basic settings see Settings BAS PLUS (Brake Assist System PLUS) .................................................... 60 Battery (SmartKey) Checking .......................................... 74 Important safety notes .................... 74 Replacing ......................................... 74 Battery (vehicle) Charging ........................................ 300 Display message ............................ 227 Important safety notes .................. 298 Jump starting ................................. 301 Belt see Seat belts Blind Spot Assist Activating/deactivating ................. 205 Notes/function .............................. 183 see Active Blind Spot Assist Brake Assist System see BAS (Brake Assist System) Brake fluid Display message ............................ 217 Notes ............................................. 350 Brake fluid level ................................ 282 Brake lamps Changing bulbs .............................. 116 Display message ............................ 223 Brakes ABS .................................................. 59 BAS .................................................. 59 BAS PLUS ........................................ 60 Brake fluid (notes) ......................... 350 Display message ............................ 214 Driving tips .................................... 156 High-performance brake system .... 158 Important safety notes .................. 156 Maintenance .................................. 157 Parking brake ................................ 154 Warning lamp ................................. 241 Breakdown see Flat tire see Towing away/tow-starting Bulbs see Changing bulbs C California Important notice for retail customers and lessees .................... 22 Calling up a malfunction see Display messages Capacities see Technical data Car see Vehicle 5 6 Index Care Carpets .......................................... 289 Car wash ........................................ 284 Display ........................................... 288 Exterior lights ................................ 287 Gear or selector lever .................... 288 Matte finish ................................... 285 Notes ............................................. 283 Paint .............................................. 285 Plastic trim .................................... 288 Power washer ................................ 284 Rear view camera .......................... 287 Roof lining ...................................... 289 Seat belt ........................................ 289 Seat cover ..................................... 288 Sensors ......................................... 287 Steering wheel ............................... 288 Tail pipes ....................................... 287 Trim pieces .................................... 288 Washing by hand ........................... 284 Wheels ........................................... 285 Windows ........................................ 286 Wiper blades .................................. 286 Wooden trim .................................. 288 Cargo tie down rings ......................... 258 Car wash (care) ................................. 284 CD player/CD changer (on-board computer) .......................................... 202 Cell phone see Mobile phone Center console ..................................... 32 Central locking Automatic locking (on-board computer) ...................................... 208 Locking/unlocking (SmartKey) ........ 70 Changing bulbs Brake lamps ................................... 116 Cornering light function ................. 115 High-beam headlamps ................... 115 Important safety notes .................. 113 Low-beam headlamps .................... 114 Overview of bulb types .................. 114 Parking lamps ................................ 115 Reversing lamps ............................ 116 Standing lamps (front) ................... 115 Child-proof locks Important safety notes .................... 57 Rear doors ....................................... 57 Children In the vehicle ................................... 53 Restraint systems ............................ 53 Child seat LATCH-type (ISOFIX) child seat anchors ............................................ 55 Special seat belt retractor ............... 55 Top Tether ....................................... 56 Cigarette lighter ................................ 262 Climate control Automatic climate control (3zone) .............................................. 125 Controlling automatically ............... 127 Cooling with air dehumidification . . 126 Defrosting the windows ................. 130 Defrosting the windshield .............. 129 Dual-zone automatic climate control ........................................... 123 Important safety notes .................. 122 Indicator lamp ................................ 127 Maximum cooling .......................... 130 Notes on using automatic climate control ................................... 124, 126 Overview of systems ...................... 122 Problems with cooling with air dehumidification ............................ 127 Problem with the rear window defroster ........................................ 130 Rear control panel ......................... 125 Refrigerant ..................................... 350 Setting the air distribution ............. 128 Setting the airflow ......................... 129 Setting the air vents ...................... 131 Setting the climate mode (AIR FLOW) ............................................ 127 Setting the temperature ................ 128 Switching air-recirculation mode on/off ............................................ 130 Switching on/off ........................... 126 Switching residual heat on/off ...... 131 Switching the rear window heating on/off ............................... 130 Switching the ZONE function on/ off .................................................. 129 Cockpit Overview .......................................... 28 see Instrument cluster Index COMAND see separate operating instructions Combination switch .......................... 109 Compass Calibrating ..................................... 276 Calling up ....................................... 275 Setting ........................................... 275 Consumption statistics (on-board computer) .......................................... 199 Convenience closing feature .............. 84 Convenience opening feature ............ 84 Coolant (engine) Checking the level ......................... 280 Display message ............................ 225 Notes ............................................. 350 Temperature (on-board computer) . 210 Temperature gauge ........................ 194 Warning lamp ................................. 247 Cooling see Climate control Cornering light function Changing bulbs .............................. 115 Display message ............................ 222 Function/notes ............................. 110 Crash-responsive emergency lighting ............................................... 113 Cruise control Cruise control lever ....................... 160 Deactivating ................................... 161 Display message ............................ 233 Driving system ............................... 159 Function/notes ............................. 159 Important safety notes .................. 159 LIM indicator lamp ......................... 160 Setting a speed .............................. 160 Storing and maintaining current speed ............................................. 160 Cup holder Center console .............................. 260 Important safety notes .................. 259 Rear compartment ......................... 260 Customer Assistance Center (CAC) ... 25 Customer Relations Department ....... 25 D Dashboard see Cockpit Data see Technical data Daytime running lamps Display message ............................ Switching on/off (on-board computer) ...................................... Switching on/off (switch) .............. Delayed switch-off Exterior lighting (on-board computer) ...................................... Interior lighting .............................. Digital speedometer ......................... Display (cleaning instructions) ........ Display messages Calling up (on-board computer) ..... Driving systems ............................. Engine ............................................ General notes ................................ Hiding (on-board computer) ........... KEYLESS-GO .................................. Lights ............................................. Safety systems .............................. Service interval display .................. SmartKey ....................................... Tires ............................................... Vehicle ........................................... Distance display (on-board computer) .......................................... Distance recorder ............................. see Odometer see Trip odometer Distance warning (warning lamp) .... DISTRONIC PLUS Deactivating ................................... Display message ............................ Displays in the multifunction display ........................................... Driving tips .................................... Function/notes ............................. Important safety notes .................. Setting the specified minimum distance ......................................... Warning lamp ................................. 224 207 107 207 208 199 288 213 228 225 213 213 238 222 214 282 238 233 236 204 199 249 169 231 168 170 161 161 168 249 7 8 Index Doors Automatic locking (on-board computer) ...................................... 208 Automatic locking (switch) ............... 78 Central locking/unlocking (SmartKey) ....................................... 70 Control panel ................................... 34 Display message ............................ 237 Emergency locking ........................... 79 Emergency unlocking ....................... 79 Important safety notes .................... 77 Opening (from inside) ...................... 78 Drinking and driving ......................... 155 Drinks holder see Cup holder Drive program Automatic ...................................... 146 Display ........................................... 143 Manual ........................................... 147 SETUP (on-board computer) .......... 210 Drive program selector ..................... 145 Driver's door see Doors Driver's seat see Seats Driving abroad Mercedes-Benz Service ................. 283 Symmetrical low beam .................. 106 Driving lamps see Daytime running lamps Driving on flooded roads .................. 158 Driving safety systems ABS (Anti-lock Braking System) ....... 59 ADAPTIVE BRAKE ............................. 64 BAS (Brake Assist System) .............. 59 BAS PLUS (Brake Assist System PLUS) ............................................... 60 Electronic brake force distribution ... 64 ESP® (Electronic Stability Program) .......................................... 61 ETS/4ETS (Electronic Traction System) ........................................... 61 Important safety information ........... 59 Overview .......................................... 58 PRE-SAFE® Brake ............................. 65 Driving systems Active Blind Spot Assist ................. Active Driving Assistance package ......................................... Active Lane Keeping Assist ............ ATTENTION ASSIST ........................ Blind Spot Assist ............................ Cruise control ................................ Display message ............................ DISTRONIC PLUS ........................... Dynamic handling package with sports mode .................................. HOLD function ............................... Lane Keeping Assist ...................... Lane Tracking package .................. Parking Guidance ........................... PARKTRONIC ................................. RACE START (AMG vehicles) .......... Rear view camera .......................... Driving tips Automatic transmission ................. Brakes ........................................... Break-in period .............................. DISTRONIC PLUS ........................... Downhill gradient ........................... Drinking and driving ....................... Driving abroad ............................... Driving in winter ............................. Driving on flooded roads ................ Driving on wet roads ...................... Exhaust check ............................... Fuel ................................................ General .......................................... Hydroplaning ................................. Icy road surfaces ........................... Limited braking efficiency on salted roads ................................... Pedals ............................................ Snow chains .................................. Symmetrical low beam .................. Wet road surface ........................... DVD audio (on-board computer) ...... DVD video (on-board computer) ...... Dynamic handling package with sports mode ....................................... 187 187 190 182 183 159 228 161 171 172 185 183 178 175 174 181 144 156 136 170 156 155 106 158 158 158 156 155 155 158 159 157 155 313 106 156 202 202 171 Index E EASY-ENTRY feature Activating/deactivating ................. 209 Function/notes ............................. 100 EASY-EXIT feature Crash-responsive ........................... 101 Function/notes ............................. 100 Switching on/off ........................... 209 EBD (electronic brake force distribution) Display message ............................ 216 Function/notes ................................ 64 Electrical fuses see Fuses Electronic brake force distribution see EBD (electronic brake force distribution) Electronic Stability Program see ESP® (Electronic Stability Program) Electronic Traction System see ETS/4ETS (Electronic Traction System) Emergency release Driver's door .................................... 79 Fuel filler flap ................................. 151 Trunk ............................................... 82 Vehicle ............................................. 79 Emergency spare wheel Storage location ............................ 293 Emergency Tensioning Devices Function ........................................... 52 Safety guidelines ............................. 37 Emissions purification Service and warranty information .... 21 Engine Check Engine warning lamp ........... 246 Display message ............................ 225 Emergency starting ........................ 305 Engine number ............................... 344 Irregular running ............................ 141 Starting problems .......................... 141 Starting the engine with the SmartKey ....................................... 139 Starting with KEYLESS-GO ............. 139 Switching off .................................. 153 Engine electronics Problem (malfunction) ................... 141 Engine oil Adding ........................................... 279 Additives ........................................ 349 Checking the oil level ..................... 279 Checking the oil level using the dipstick .......................................... 279 Display message ............................ 227 Filling capacity ............................... 346 Notes about oil grades ................... 349 Notes on oil level/consumption .... 279 Temperature (on-board computer) . 210 Viscosity ........................................ 349 ESP® (Electronic Stability Program) AMG menu (on-board computer) . . . 210 Deactivating/activating (AMG vehicles) .......................................... 62 Deactivating/activating (except AMG vehicles) ................................ 204 Deactivating/activating (notes; except AMG vehicles) ...................... 62 Display message ............................ 214 ETS/4ETS ........................................ 61 Function/notes ................................ 61 Important safety information ........... 61 Warning lamp ................................. 243 ETS/4ETS (Electronic Traction System) ................................................ 61 Exhaust check ................................... 156 Exhaust tail pipe (cleaning instructions) ...................................... 287 Exterior lighting see Lights Exterior mirrors Adjusting ....................................... 101 Dipping (automatic) ....................... 102 Folding in/out (automatically) ....... 102 Folding in/out (electrically) ........... 101 Folding in when locking (on-board computer) ...................................... 209 Out of position (troubleshooting) ... 102 Setting ........................................... 102 Storing settings (memory function) ........................................ 103 Storing the parking position .......... 102 Eyeglasses compartment ................. 255 9 10 Index Dashboard fuse box ....................... Fuse box in the engine compartment ................................. Fuse box in the trunk ..................... Important safety notes .................. F Filler cap see Fuel filler flap First-aid kit ......................................... 292 Flat tire Changing a wheel/mounting the spare wheel ................................... 293 MOExtended run-flat system ......... 297 Preparing the vehicle ..................... 293 Raising the vehicle ......................... 295 Floormat ............................................. 276 Frequencies Garage door opener ....................... 275 Front fog lamps ................................. 108 Display message ............................ 223 Switching on/off ........................... 108 Front windshield see Windshield Fuel Additives ........................................ 348 Consumption statistics .................. 199 Displaying the current consumption .................................. 199 Displaying the range ...................... 199 Driving tips .................................... 155 Flexible fuel vehicles ...................... 347 Fuel gauge ....................................... 29 Important safety notes .................. 347 Premium-grade unleaded gasoline . 347 Problem (malfunction) ................... 153 Refueling ........................................ 150 Specifications ................................ 348 Tank content/reserve fuel ............. 346 Fuel filler flap Emergency release ........................ 151 Opening/closing ............................ 151 Fuel level Calling up the range (on-board computer) ...................................... 199 Fuel tank Capacity ........................................ 346 Problem (malfunction) ................... 153 Fuse allocation chart (vehicle tool kit) ...................................................... 292 Fuses Allocation chart ............................. 305 Before changing ............................. 305 305 306 306 305 G Garage door opener Clearing the memory ..................... Frequencies ................................... Notes ............................................. Opening/closing the garage door .. Programming (button in the rearview mirror) ................................... Gasoline ............................................. Gear indicator (on-board computer) .......................................... Gear or selector lever (cleaning guidelines) ......................................... Genuine Mercedes-Benz parts ......... Glove box ........................................... 274 275 270 273 271 150 210 288 342 254 H Handbrake see Parking brake Hazard warning lamps ...................... 109 Headlamp cleaning system Notes ............................................. 351 Headlamps Adding fluid to cleaning system ..... 281 Cleaning system (function) ............ 109 Fogging up ..................................... 112 see Automatic headlamp mode Head restraints Adjusting ......................................... 95 Adjusting (electrically) ..................... 96 Adjusting (manually) ........................ 95 Adjusting (rear) ................................ 96 Installing/removing (rear) ................ 97 Luxury .............................................. 96 see NECK-PRO head restraints see NECK-PRO head restraints/ NECK-PRO luxury head restraints Heating see Climate control Index High-beam headlamps Changing bulbs .............................. Display message ............................ Switching Adaptive Highbeam Assist on/off ................................. Switching on/off ........................... Hill start assist .................................. HOLD function Display message ............................ Function/notes ............................. Hood Closing ........................................... Display message ............................ Opening ......................................... Hydroplaning ..................................... 115 223 110 109 140 228 172 279 237 278 158 I Ignition lock see Key positions Immobilizer .......................................... 66 Indicator lamps see Warning and indicator lamps Indicators see Turn signals Instrument cluster Overview .......................................... 29 Settings ......................................... 206 Warning and indicator lamps ........... 30 Instrument cluster lighting ................ 29 Instrument lighting see Instrument cluster lighting Interior lighting ................................. 112 Automatic control .......................... 112 Delayed switch-off (on-board computer) ...................................... 208 Emergency lighting ........................ 113 Manual control ............................... 113 Overview ........................................ 112 Reading lamp ................................. 112 J Jack Storage location ............................ 292 Using ............................................. 295 Jump starting (engine) ...................... 301 K Key see SmartKey KEYLESS-GO Convenience closing feature ............ 85 Display message ............................ 238 Locking ............................................ 71 Start/Stop button .......................... 137 Starting the engine ........................ 139 Unlocking ......................................... 71 Key positions KEYLESS-GO .................................. 137 SmartKey ....................................... 137 Kickdown Driving tips .................................... 144 Manual drive program .................... 148 Knee bag .............................................. 40 L Lamps see Warning and indicator lamps Lane-change assistant see Blind Spot Assist Lane detection (automatic) see Lane Keeping Assist Lane Keeping Assist Activating/deactivating ................. 205 Display message ............................ 229 Function/information .................... 185 Lane Tracking package ..................... 183 Lap time (RACETIMER) ...................... 211 LATCH-type (ISOFIX) child seat anchors ................................................ 55 Lighting see Lights Lights Activating/deactivating the interior lighting delayed switch-off . 208 Active light function ....................... 110 Automatic headlamp mode ............ 108 Cornering light function ................. 110 Display message ............................ 222 Driving abroad ............................... 106 Fog lamps ...................................... 108 Hazard warning lamps ................... 109 High beam flasher .......................... 109 11 12 Index High-beam headlamps ................... 109 Light switch ................................... 106 Low-beam headlamps .................... 107 Parking lamps ................................ 106 Rear fog lamp ................................ 108 Switching Adaptive Highbeam Assist on/off ................................. 207 Switching the daytime running lamps on/off (on-board computer) ...................................... 207 Switching the daytime running lamps on/off (switch) .................... 107 Switching the exterior lighting delayed switch-off on/off (onboard computer) ............................ 207 Switching the surround lighting on/off (on-board computer) .......... 207 Turn signals ................................... 109 see Changing bulbs see Interior lighting Light sensor (display message) ....... 225 LIM indicator lamp Cruise control ................................ 160 DISTRONIC PLUS ........................... 164 Loading guidelines ............................ 254 Locking see Central locking Locking (doors) Automatic ........................................ 78 Emergency locking ........................... 79 From inside (central locking button) ............................................. 78 Locking centrally see Central locking Locking verification signal (onboard computer) ............................... 208 Low-beam headlamps Changing bulbs .............................. 114 Display message ............................ 222 Setting for driving abroad (symmetrical) ................................. 106 Switching on/off ........................... 107 Lumbar support Adjusting ......................................... 97 Adjusting the 4-way lumbar support ............................................ 97 Luxury head restraints ....................... 96 M M+S tires ............................................ 312 Maintenance see ASSYST PLUS service interval display Malfunction message see Display messages Matte finish (cleaning instructions) ...................................... 285 mbrace Call priority .................................... 268 Display message ............................ 218 Downloading destinations (COMAND) ..................................... 269 Emergency call .............................. 266 Important safety notes .................. 264 Locating a stolen vehicle ............... 270 MB info call button ........................ 268 Remote vehicle locking .................. 270 Roadside Assistance button .......... 267 Search & Send ............................... 269 Self-test ......................................... 265 System .......................................... 265 Vehicle remote unlocking .............. 269 Mechanical key Function/notes ................................ 73 Locking vehicle ................................ 79 Unlocking the driver's door .............. 79 Memory card (audio) ......................... 202 Memory function ............................... 103 Message memory (on-board computer) .......................................... 213 Messages see Display messages Mirrors see Exterior mirrors see Rear-view mirror see Vanity mirror Mobile phone Menu (on-board computer) ............ 202 Modifying the programming (SmartKey) ........................................... 73 MOExtended run-flat system ........... 297 MP3 Operation ....................................... 202 see separate operating instructions Index Multifunction display Function/notes ............................. 196 Permanent display ......................... 206 Multifunction steering wheel Operating the on-board computer . 195 Overview .......................................... 31 Multifunction steering wheel (4 buttons) see 4-button multifunction steering wheel N Navigation Menu (on-board computer) ............ 200 see separate operating instructions NECK-PRO head restraints Operation ......................................... 47 Resetting after being triggered ........ 47 NECK-PRO luxury head restraints Operation ......................................... 47 Resetting after being triggered ........ 47 Notes on breaking-in a new vehicle ................................................ 136 O Occupant Classification System (OCS) Faults ............................................... 46 Operation ......................................... 42 System self-test ............................... 45 Occupant safety Children in the vehicle ..................... 53 System overview .............................. 36 Octane number (fuel) ........................ 348 Odometer ........................................... 199 see Trip odometer Oil see Engine oil On-board computer AMG menu ..................................... 210 Assistance menu ........................... 204 Audio menu ................................... 201 Convenience submenu .................. 209 Displaying a service message ........ 283 Display messages .......................... 213 DISTRONIC PLUS ........................... 168 Factory settings submenu ............. 210 Important safety notes .................. 194 Instrument cluster submenu .......... 206 Lighting submenu .......................... 207 Menu overview .............................. 198 Message memory .......................... 213 Navigation menu ............................ 200 Operation ....................................... 195 RACETIMER ................................... 211 Service menu ................................. 206 Settings menu ............................... 206 Standard display ............................ 199 Telephone menu ............................ 202 Trip menu ...................................... 199 Vehicle submenu ........................... 208 Video DVD operation ..................... 202 On-board diagnostics interface .......... 24 Opening and closing the side trim panels ................................................. 115 Operating safety On-board diagnostics interface ........ 24 Operating system see On-board computer Outside temperature display ........... 195 Overhead control panel ...................... 33 Override feature Rear side windows ........................... 57 P Paint code number ............................ 343 Paintwork (cleaning instructions) . . . 285 Panic alarm .......................................... 58 Panorama roof with power tilt/ sliding panel Opening/closing .............................. 87 Opening/closing the roller sunblind ........................................... 88 Problem (malfunction) ..................... 89 Resetting ......................................... 88 Panorama sliding sunroof Important safety notes .................... 86 Parcel net ........................................... 256 Parking ............................................... 153 Important safety notes .................. 153 Parking brake ................................ 154 13 14 Index Position of exterior mirror, frontpassenger side ............................... 102 Rear view camera .......................... 181 see PARKTRONIC Parking aid Parking Guidance ........................... 178 see Exterior mirrors see PARKTRONIC Parking brake Display message ............................ 216 Notes/function .............................. 154 Parking Guidance Display message ............................ 230 Important safety notes .................. 178 Parking lamps (changing bulbs) ...... 115 PARKTRONIC Deactivating/activating ................. 177 Driving system ............................... 175 Function/notes ............................. 175 Problem (malfunction) ................... 178 Range of the sensors ..................... 176 Warning display ............................. 177 PASSENGER AIR BAG OFF indicator lamp ...................................................... 42 Pedals ................................................. 155 Permanent four-wheel drive see 4MATIC (permanent fourwheel drive) Plastic trim (cleaning instructions) . 288 Power washers .................................. 284 Power windows see Side windows PRE-SAFE® Brake (vehicles with DISTRONIC PLUS) Display message ............................ 218 Function/notes ................................ 65 Switching on/off ........................... 205 Warning lamp ................................. 249 Preventive occupant safety system see PRE-SAFE® (Preventive occupant safety system) Product information ............................ 21 Program selector button .................. 144 Pulling away Automatic transmission ................. 139 Q Qualified specialist workshop ........... 24 R RACE START (AMG vehicles) ............. 174 RACETIMER (on-board computer) .... 211 Radar sensor system Activating/deactivating ................. 208 Display message ............................ 229 Radio Selecting a station ......................... 201 see separate operating instructions Reading lamp ..................................... 112 Rear compartment Setting the airflow ......................... 129 Setting the air vents ...................... 133 Rear fog lamp Display message ............................ 223 Switching on/off ........................... 108 Rear seat Display message ............................ 237 Folding the backrest forwards/ back ............................................... 257 Rear view camera Cleaning instructions ..................... 287 Function/notes ............................. 181 Rear-view mirror Anti-glare (manual) ........................ 101 Dipping (automatic) ....................... 102 Rear window blind ............................ 261 Rear window defroster Problem (malfunction) ................... 130 Rear window heating Switching on/off ........................... 130 Rear window wiper Replacing the wiper blade .............. 118 Switching on/off ........................... 117 Refueling Fuel gauge ....................................... 29 Important safety notes .................. 150 Refueling process .......................... 151 see Fuel Releasing the parking lock manually (automatic transmission) ..................................... 149 Index Remote control Garage door opener ....................... 270 Reporting safety defects .................... 25 Reserve (fuel tank) see Fuel Reserve fuel Display message ............................ 228 Warning lamp ................................. 246 see Fuel Residual heat (climate control) ........ 131 Restraint system see SRS (Supplemental Restraint System) Reverse gear Engaging (automatic transmission) ................................. 142 Roadside Assistance (breakdown) .... 22 Roller blind see Roller sunblind Roller sunblind Panorama roof with power tilt/ sliding panel ..................................... 88 Rear side windows ......................... 261 Rear window .................................. 261 Roof carrier ........................................ 259 Roof lining and carpets (cleaning guidelines) ......................................... 289 Roof load (maximum) ........................ 351 Route see Route guidance (navigation) Route guidance (navigation) ............ 200 S Safety Children in the vehicle ..................... 53 Child restraint systems .................... 53 Occupant Classification System (OCS) ............................................... 42 Overview of occupant safety systems ........................................... 36 Safety systems see Driving safety systems Seat belts Adjusting the height ......................... 51 Belt force limiters ............................ 52 Cleaning ......................................... 289 Correct usage .................................. 49 Emergency Tensioning Devices ........ 52 Fastening ......................................... 50 Important safety guidelines ............. 48 Releasing ......................................... 51 Safety guidelines ............................. 37 Special seat belt retractor ............... 55 Warning lamp ................................. 239 Warning lamp (function) ................... 51 Seats Adaptive seat backrests (AMG vehicles) .......................................... 97 Adjusting (electrically) ..................... 94 Adjusting (manually and electrically) ...................................... 94 Adjusting lumbar support ................ 97 Adjusting the 4-way lumbar support ............................................ 97 Adjusting the head restraint ............ 95 Cleaning the cover ......................... 288 Correct driver's seat position ........... 92 Important safety notes .................... 93 Seat heating problem ...................... 98 Seat ventilation problem .................. 99 Storing settings (memory function) ........................................ 103 Switching seat heating on/off ......... 98 Switching seat ventilation on/off .... 98 Sensors (cleaning instructions) ....... 287 Service see ASSYST PLUS service interval display Service interval display Displaying service messages ......... 283 Hiding service messages ............... 283 Notes ............................................. 283 Service messages .......................... 282 Service menu (on-board computer) . 206 Service products Brake fluid ..................................... 350 Capacities ...................................... 346 Coolant (engine) ............................ 350 Engine oil ....................................... 349 Fuel ................................................ 347 Important safety notes .................. 344 Refrigerant (air-conditioning system) .......................................... 350 Washer fluid ................................... 351 15 16 Index Settings Factory (on-board computer) ......... 210 On-board computer ....................... 206 Setting the air distribution ............... 128 Setting the airflow ............................ 129 SETUP (on-board computer) ............. 210 Side impact air bag ............................. 40 Side marker lamp (display message) ............................................ 224 Side windows Convenience closing feature ............ 84 Convenience opening feature .......... 84 Important safety information ........... 83 Opening/closing .............................. 83 Problem (malfunction) ..................... 86 Resetting ......................................... 85 Sliding sunroof Important safety notes .................... 86 Opening/closing .............................. 87 Problem (malfunction) ..................... 89 Resetting ......................................... 87 see Panorama roof with power tilt/sliding panel SmartKey Changing the battery ....................... 74 Changing the programming ............. 73 Checking the battery ....................... 74 Convenience closing feature ............ 84 Convenience opening feature .......... 84 Display message ............................ 238 Door central locking/unlocking ....... 70 Important safety notes .................... 70 Loss ................................................. 76 Mechanical key ................................ 73 Positions (ignition lock) ................. 137 Problem (malfunction) ..................... 76 Starting the engine ........................ 139 Snow chains ...................................... 313 Sockets Points to observe before use ......... 263 Rear compartment ......................... 263 Spare wheel Notes/data .................................... 337 Storage location ............................ 293 see Emergency spare wheel Specialist workshop ............................ 24 Speed, controlling see Cruise control Speedometer Digital ............................................ 199 In the Instrument cluster ................. 29 Segments ...................................... 195 Selecting the unit of measurement ................................ 206 see Instrument cluster SPORT handling mode Activating/deactivating (AMG vehicles) .......................................... 62 Warning lamp ................................. 244 SRS (Supplemental Restraint System) Display message ............................ 219 Introduction ..................................... 36 Warning lamp ................................. 245 Warning lamp (function) ................... 36 Standing lamps Changing bulbs .............................. 115 Display message ............................ 224 Switching on/off ........................... 106 Starting (engine) ................................ 138 Station see Radio Steering (display message) .............. 237 Steering wheel Adjusting (electrically) ................... 100 Adjusting (manually) ........................ 99 Button overview ............................... 31 Buttons (on-board computer) ......... 195 Cleaning ......................................... 288 Important safety notes .................... 99 Paddle shifters ............................... 145 Storing settings (memory function) ........................................ 103 Steering wheel paddle shifters ........ 145 Stopwatch (RACETIMER) ................... 211 Stowage compartments Armrest (under) ............................. 255 Cup holders ................................... 259 Eyeglasses compartment ............... 255 Glove box ....................................... 254 Important safety information ......... 254 Parcel net ...................................... 256 Rear ............................................... 256 Under driver's seat/frontpassenger seat .............................. 256 Index Stowage well beneath the trunk floor .................................................... 258 Summer opening see Convenience opening feature Summer tires ..................................... 312 Sun visor ............................................ 260 Supplemental Restraint System see SRS (Supplemental Restraint System) Surround lighting (on-board computer) .......................................... 207 Switching air-recirculation mode on/off ................................................. 130 Switching off the alarm (ATA) ............ 67 T Tachometer ........................................ 195 Tail lamps Display message ............................ 223 Tank see Fuel tank Tank content Fuel gauge ....................................... 29 Technical data Notes ............................................. 342 Tires/wheels ................................. 335 Vehicle data ................................... 351 TELEAID Call priority .................................... 268 Display message ............................ 218 Downloading destinations (COMAND) ..................................... 269 Emergency call .............................. 266 Important safety notes .................. 264 Locating a stolen vehicle ............... 270 MB info call button ........................ 268 Remote vehicle locking .................. 270 Roadside Assistance button .......... 267 Search & Send ............................... 269 Self-test ......................................... 265 System .......................................... 265 Vehicle remote unlocking .............. 269 Telephone Accepting a call ............................. 203 Display message ............................ 237 Menu (on-board computer) ............ 202 Number from the phone book ........ 203 Redialing ........................................ 203 Rejecting/ending a call ................. 203 Temperature Coolant .......................................... 194 Coolant (on-board computer) ......... 210 Engine oil (on-board computer) ...... 210 Outside temperature ...................... 195 Setting (climate control) ................ 128 Theft deterrent systems ATA (Anti-Theft Alarm system) ......... 67 Immobilizer ...................................... 66 Through-loading feature ................... 256 Tilt/sliding sunroof see Sliding sunroof Timing (RACETIMER) ......................... 211 Tiredness assistant see ATTENTION ASSIST Tire pressure Calling up (on-board computer) ..... 319 Checking manually ........................ 317 Display message ............................ 233 Maximum ....................................... 316 Notes ............................................. 315 Pressure loss warning .................... 317 Recommended ............................... 313 Tire pressure monitoring system Function/notes ............................. 319 Restarting ...................................... 321 Warning lamp ................................. 250 Tires Aspect ratio (definition) ................. 333 Average weight of the vehicle occupants (definition) .................... 331 Bar (definition) ............................... 331 Characteristics .............................. 331 Checking ........................................ 311 Definition of terms ......................... 331 Direction of rotation ...................... 334 Display message ............................ 233 Distribution of the vehicle occupants (definition) .................... 334 DOT, Tire Identification Number (TIN) ............................................... 330 DOT (Department of Transportation) (definition) ............ 331 GAWR (Gross Axle Weight Rating) (definition) ..................................... 332 17 18 Index GVW (Gross Vehicle Weight) (definition) ..................................... GVWR (Gross Vehicle Weight Rating) (definition) ......................... Important safety notes .................. Increased vehicle weight due to optional equipment (definition) ...... Kilopascal (kPa) (definition) ........... Labeling (overview) ........................ Load bearing index (definition) ...... Load index ..................................... Load index (definition) ................... Maximum loaded vehicle weight (definition) ..................................... Maximum load on a tire (definition) ..................................... Maximum permissible tire pressure (definition) ....................... Maximum tire load ......................... Maximum tire load (definition) ....... Optional equipment weight (definition) ..................................... PSI (pounds per square inch) (definition) ..................................... Replacing ....................................... Service life ..................................... Sidewall (definition) ....................... Speed rating (definition) ................ Storing ........................................... Structure and characteristics (definition) ..................................... Temperature .................................. TIN (Tire Identification Number) (definition) ..................................... Tire bead (definition) ...................... Tire pressure (definition) ................ Tire pressures (recommended) ...... Tire size (data) ............................... Tire size designation, load-bearing capacity, speed rating .................... Tire tread ....................................... Tire tread (definition) ..................... Total load limit (definition) ............. Traction ......................................... Traction (definition) ....................... Tread wear ..................................... Uniform Tire Quality Grading Standards ...................................... 332 332 310 332 332 327 333 330 332 332 333 333 325 333 333 333 334 311 333 332 335 331 327 333 333 333 331 335 328 311 333 334 326 334 326 326 Uniform Tire Quality Grading Standards (definition) .................... 331 Unladen weight (definition) ............ 332 Wear indicator (definition) ............. 334 Wheel rim (definition) .................... 332 see Flat tire Top Tether ............................................ 56 Towing Important safety guidelines ........... 302 Installing the towing eye ................ 303 Removing the towing eye ............... 304 With the rear axle raised ................ 304 Towing away With both axles on the ground ....... 304 Tow-starting Emergency engine starting ............ 305 Important safety notes .................. 302 Transmission see Automatic transmission Transporting the vehicle .................. 304 Trim pieces (cleaning instructions) . 288 Trip computer (on-board computer) .......................................... 199 Trip meter see Trip odometer Trip odometer Calling up ....................................... 199 Resetting (on-board computer) ...... 200 Trunk Emergency release .......................... 82 Important safety guidelines ............. 80 Locking separately ........................... 82 Opening (automatically from inside) .............................................. 81 Opening (automatically from outside) ............................................ 81 Trunk lid Display message ............................ 236 Opening/closing .............................. 80 Turn signals Display message ............................ 222 Switching on/off ........................... 109 Type identification plate see Vehicle identification plate Index U Unlocking Emergency unlocking ....................... 79 From inside the vehicle (central unlocking button) ............................. 78 V Vanity mirror (in sun visor) .............. 260 Vehicle Correct use ...................................... 24 Data acquisition ............................... 25 Display message ............................ 236 Equipment ....................................... 21 Individual settings .......................... 206 Limited Warranty ............................. 25 Loading .......................................... 322 Locking (in an emergency) ............... 79 Locking (SmartKey) .......................... 71 Lowering ........................................ 297 Maintenance .................................... 22 Parking for a long period ................ 154 Pulling away ................................... 139 Raising ........................................... 295 Reporting problems ......................... 24 Towing away .................................. 302 Transporting .................................. 304 Unlocking (in an emergency) ........... 79 Unlocking (SmartKey) ...................... 71 Vehicle data ................................... 351 Vehicle battery see Battery (vehicle) Vehicle data ....................................... 351 see Technical data Vehicle dimensions ........................... 351 Vehicle emergency locking ................ 79 Vehicle identification number see VIN Vehicle identification plate .............. 343 Vehicle tool kit .................................. 292 Video (DVD) ........................................ 202 VIN ...................................................... 343 W Warning and indicator lamps ABS ................................................ 242 Brakes ........................................... 241 Check Engine ................................. 246 Coolant .......................................... 247 Cruise control ................................ 160 Distance warning ........................... 249 DISTRONIC PLUS ........................... 249 ESP® .............................................. 243 ESP® OFF ....................................... 244 Fuel tank ........................................ 246 LIM (DISTRONIC PLUS) .................. 164 Overview .......................................... 30 PASSENGER AIR BAG OFF indicator lamp .................................. 42 Reserve fuel ................................... 246 Seat belt ........................................ 239 SPORT handling mode ................... 244 SRS ................................................ 245 Tire pressure monitor .................... 250 Warranty ............................................ 343 Washer fluid Display message ............................ 237 see Windshield washer system Wheel bolt tightening torque ........... 297 Wheel chock ...................................... 294 Wheels Changing a wheel .......................... 293 Checking ........................................ 311 Cleaning ......................................... 285 Important safety notes .................. 310 Interchanging/changing ................ 334 Mounting a wheel .......................... 296 Removing a wheel .......................... 296 Storing ........................................... 335 Tightening torque ........................... 297 Wheel size/tire size ....................... 335 Window curtain air bag Display message ............................ 219 Operation ......................................... 42 Windows Cleaning ......................................... 286 see Side windows Windshield Defrosting ...................................... 129 Windshield washer system .............. 281 Notes ............................................. 351 Windshield wipers Problem (malfunction) ................... 119 Rear window wiper ........................ 117 19 20 Index Replacing the wiper blades ............ Switching on/off ........................... Winter driving Important safety notes .................. Slippery road surfaces ................... Snow chains .................................. Winter tires M+S tires ....................................... Wiper blades Cleaning ......................................... Important safety notes .................. Replacing (rear window) ................ Replacing (windshield) ................... Wooden trim (cleaning instructions) ...................................... 118 116 312 159 313 312 286 118 118 118 288 Introduction Product information Mercedes-Benz recommends that you use genuine Mercedes-Benz parts, conversion parts and accessories that have been approved for the type of vehicle. Mercedes-Benz tests genuine parts as well as conversion parts and accessories which have been specifically approved for your vehicle for their reliability, safety and suitability. Despite ongoing market research, Mercedes-Benz is unable to assess other parts. Therefore, Mercedes-Benz accepts no responsibility for the use of such parts in Mercedes-Benz vehicles, even if they have been independently or officially approved. The use of non-approved parts could affect your vehicle's operating safety. Mercedes-Benz therefore recommends that you use genuine Mercedes-Benz parts, conversion parts and accessories that have been approved for the type of vehicle. Genuine Mercedes-Benz parts, approved conversion parts and accessories are available from any authorized Mercedes-Benz Center. Here, you will receive advice about permissible technical modifications, and the parts will be professionally installed. Operator's Manual Notes on the Operator's Manual This Operator's Manual contains a great deal of helpful information. We urge you to read it carefully and familiarize yourself with the vehicle before driving. For your own safety and longer service life of the vehicle, we urge you to follow the instructions and warnings contained in this Operator's Manual. Ignoring them could result in damage to the vehicle or personal injury to you or others. Vehicle damage caused by failure to follow instructions is not covered by the Mercedes-Benz Limited Warranty. Vehicle equipment This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety-related systems and functions. The equipment in your vehicle may therefore differ from that shown in the descriptions and illustrations. All the systems found in your vehicle are listed in the original purchase agreement of your vehicle. Should you have any questions concerning equipment and operation, please consult an authorized Mercedes-Benz Center. The Operating Instructions and the Maintenance Booklet are important documents and should be kept in the vehicle. Service and vehicle operation Service and literature Your vehicle is covered under the terms of the warranties printed in the Service and Warranty Information booklet. Your authorized Mercedes-Benz Center will exchange or repair any defective parts originally installed in the vehicle in accordance with the terms of the following warranties: RNew Vehicle Limited Warranty Systems Warranty REmission Performance Warranty RCalifornia, Connecticut, Maine, Massachusetts, New York, Pennsylvania, Rhode Island and Vermont Emission Control Systems Warranty RState Warranty Enforcement Laws (Lemon Laws) REmission 21 22 Introduction Information for customers in California Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease price, if after a reasonable number of repair attempts Mercedes-Benz USA, LLC and/or its authorized repair or service facilities fail to fix one or more substantial defects or malfunctions in the vehicle that are covered by its express warranty. During the period of 18 months from original delivery of the vehicle or the accumulation of 18 000 miles (approximately 29 000 km) on the odometer of the vehicle, whichever occurs first, a reasonable number of repair attempts is presumed for a retail buyer or lessee if one or more of the following occurs: (1) the same substantial defect or malfunction results in a condition that is likely to cause death or serious bodily injury if the vehicle is driven, that defect or malfunction has been subject to repair two or more times, and you have directly notified Mercedes-Benz USA, LLC in writing of the need for its repair. (2) the same substantial defect or malfunction of a less serious nature than category (1) has been subject to repair four or more times and you have directly notified Mercedes-Benz in writing of the need for its repair. (3) the vehicle is out of service by reason of repair of the same or different substantial defects or malfunctions for a cumulative total of more than 30 calendar days. Please send your written notice to: Mercedes-Benz USA, LLC Customer Assistance Center One Mercedes Drive Montvale, NJ 07645-0350 Maintenance The Service and Warranty Booklet describes all the necessary maintenance work which should be done at regular intervals. Always have the Service and Warranty Booklet with you when you bring the vehicle to an authorized Mercedes-Benz Center. The service advisor will record every service for you in the Service and Warranty Booklet. Roadside Assistance The Mercedes-Benz Roadside Assistance Program offers technical help in the event of a breakdown. Calls to the toll-free Roadside Assistance Hotline are answered by our agents 24 hours a day, 365 days a year. 1-800-FOR-MERCedes(1-800-367-6372) (USA) 1-800-387-0100 (Canada) For additional information, refer to the Mercedes-Benz Roadside Assistance Program brochure (USA) or the "Roadside Assistance" section in the Service and Warranty booklet (Canada). You will find both in your vehicle literature portfolio. Change of address or change of ownership In the event of a change of address, please send us the "Change of Address Notice" found in the Service and Warranty Information Booklet, or simply call the Mercedes-Benz Customer Assistance Center (in the USA) at the hotline number 1-800-FOR-MERCedes(1-800-367-6372) or Customer Service Center (in Canada) at 1-800-387-0100. This will assist us in contacting you in a timely manner should the need arise. If you sell your Mercedes, please leave the entire literature in the vehicle so that it is available to the next owner. Introduction If you bought this vehicle used, be sure to send in the "Notice of Purchase of Used Car" found in the Service and Warranty Information Booklet, or call the MercedesBenz Customer Assistance Center (in the USA) at 1-800-FOR-MERCedes(1-800-367-6372) or Customer Service (in Canada) at 1-800-387-0100. Vehicle operation outside the USA and Canada If you plan to operate your vehicle in foreign countries, please be aware that: Rservice facilities or replacement parts may not be readily available. Runleaded fuel for vehicles with a catalytic converter may not be available. Leaded fuel may cause damage to the catalytic converter. Rthe fuel may have a considerably lower octane rating. Unsuitable fuel can cause engine damage. Some Mercedes-Benz models are available for delivery in Europe through our European Delivery Program. For details, consult an authorized Mercedes-Benz Center or write to one of the following addresses. In the USA Mercedes-Benz USA, LLC European Delivery Department One Mercedes Drive Montvale, NJ 07645-0350 In Canada Mercedes-Benz Canada, Inc. European Delivery Department 98 Vanderhoof Avenue Toronto, Ontario M4G 4C9 Operating safety Safety notes G WARNING Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle's electronic components are interconnected, any modifications made may produce an undesired effect on other systems. Electronic malfunctions could seriously impair the operating safety of your vehicle. Contact an authorized Mercedes-Benz Center for repairs or modifications to electronic components. Other improper work or modifications on the vehicle could also have a negative impact on the operating safety of the vehicle. Some safety systems only function when the engine is running. You should therefore never turn off the engine while driving. G WARNING Heavy blows against the vehicle underbody or tires/wheels may cause serious damage and impair the operating safety of your vehicle. Such blows can be caused, for example, by running over an obstacle, road debris or a pothole. If you feel a sudden significant vibration or ride disturbance, or you suspect that damage to your vehicle has occurred: Rturn on your hazard warning flashers. down carefully. Rdrive with caution to an area which is a safe distance from the road. Inspect the vehicle underbody and tires/ wheels for possible damage. If the vehicle appears unsafe, have it towed to the nearest authorized Mercedes-Benz Center or other qualified maintenance or repair facility for further inspection or repairs. Rslow Z 23 24 Introduction On-board diagnostics interface G WARNING If you connect equipment to the on-board diagnostics interface, it can affect the operation of the vehicle systems. This can impair the operating safety of your vehicle while driving. There is a risk of accident. Do not connect any equipment to the onboard diagnostics interface. G WARNING Loose equipment or equipment cables which are connected to the on-board diagnostics interface can obstruct the area around the pedals. The equipment or the cables could get between the pedals in the event of sudden braking or acceleration. You may then no longer be able to brake, operate the clutch or accelerate as intended. There is a risk of accident. Do not attach any equipment or cables in the driver footwell. Connecting equipment to the on-board diagnostics interface can lead to emissions monitoring information being reset. This may lead to the vehicle failing to meet the requirements at the next special emissions test or main inspection. If the engine is switched off and equipment on the on-board diagnostic interface is used, the starter battery may discharge. The on-board diagnostics interface is only intended for the connection of diagnostic equipment at a qualified specialist workshop. Qualified specialist workshop An authorized Mercedes-Benz Center is a qualified specialist workshop. It has the necessary specialist knowledge, tools and qualifications to correctly carry out the work required on your vehicle. This is especially the case for work relevant to safety. Observe the notes in the service booklet. Always have the following work carried out at an authorized Mercedes-Benz Center: Rwork relevant to safety and maintenance work Rrepair work Ralterations, installation work and modifications Rwork on electronic components Rservice Proper use G WARNING There are various warning stickers affixed to your vehicle. Their purpose is to alert you and others to various dangers. Therefore, do not remove any warning stickers unless the sticker clearly states that you may do so. If you remove any warning stickers, you or others could fail to recognize certain dangers and be injured. The proper use of the vehicle requires that you familiarize yourself with the following information and rules: Rsafety notes in this Operator's Manual data in this Operator's Manual Rtraffic rules and regulations Rlaws and safety standards pertaining to motor vehicles Rtechnical Problems with your vehicle If you should experience a problem with your vehicle, particularly one that you believe may affect its safe operation, we urge you to contact an authorized Mercedes-Benz Center immediately to have the problem diagnosed and rectified. If the problem is not resolved to your satisfaction, please discuss the problem again with a Mercedes-Benz Center or contact us at one of the following addresses. Introduction In the USA Customer Assistance Center Mercedes-Benz USA, LLC One Mercedes Drive Montvale, NJ 07645-0350 In Canada Customer Relations Department Mercedes-Benz Canada, Inc. 98 Vanderhoof Avenue Toronto, Ontario M4G 4C9 Reporting malfunctions relevant to safety USA only: The following text is reproduced as required of all manufacturers according to Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the National Traffic and Motor Vehicle Safety Act of 1966. Reporting safety defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Mercedes-Benz USA, LLC. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Mercedes-Benz USA, LLC. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236(TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA Headquarters, 1 1200 New Jersey Avenue, SE, West Building, Washington, DC 20590. You can obtain additional information about vehicle safety from: http://www.safercar.gov. Limited Warranty ! Follow the instructions in this manual about the proper operation of your vehicle as well as about possible vehicle damage. Damage to your vehicle that arises from culpable contraventions against these instructions are not covered either by Mercedes-Benz Limited Warranty or by the New or Used-Vehicle Warranty of Daimler AG. Data stored in the vehicle Information about electronic data acquisition in the vehicle (Including notice pursuant to California Code § 9951) Your vehicle records electronic data. If your vehicle is equipped with mbrace1, data is transmitted in the event of an accident. This information helps, for example, to test vehicle systems after an accident and to continually improve vehicle safety. Daimler AG can access this data and submit it: Rfor safety research or vehicle diagnosis purposes Rwith the consent of the vehicle owner Ron the instruction of prosecuting authorities Rfor use in arbitration of disputes that involve Daimler AG, its affiliates or its sales and service organizations Ras otherwise required or permitted by law. The system is called TELE AID in Canada. Z 25 Introduction 26 Please observe the mbrace1 purchase agreement for further details on the recording and transfer of data by this system. 1 The system is called TELE AID in Canada. Cockpit ................................................. Instrument cluster .............................. Multifunction steering wheel ............. Center console .................................... Overhead control panel ...................... Door control panel .............................. 28 29 31 32 33 34 At a glance 27 28 Cockpit At a glance Cockpit Function Page Steering wheel paddle shifters 145 ; Cruise control lever 160 = Instrument cluster 29 ? Horn A PARKTRONIC warning display (Canada only) 175 B Overhead control panel 33 C Climate control systems 122 D Ignition lock Start/Stop button 137 137 : Function E F Page Adjusts the steering wheel manually 99 Adjusts the steering wheel electrically 99 G Combination switch 109 H Parking brake 154 I On-board diagnostic interface 24 J Opens the hood 278 K Releases the parking brake 154 L Light switch 106 Instrument cluster 29 Instrument cluster Function At a glance Displays and controls Page : Fuel gauge ; Coolant temperature 194 = Speedometer with segments 195 Multifunction display 196 ? Function A Tachometer B Instrument cluster lighting brightness control: turn clockwise or counterclockwise Page 195 30 Instrument cluster At a glance Warning and indicator lamps Function Page ÷ ESP® M SPORT handling mode in AMG vehicles 243 ; Distance warning 249 = ESP® OFF 243 ? Brakes (USA only) 241 A Brakes (Canada only) 241 B Turn signal 109 C ABS 242 D SRS 245 E Check engine 246 : 244 Function Page F Tire pressure monitor 250 G Seat belt 239 H ESP® 243 I Coolant 247 J Rear fog lamp 108 K High-beam headlamps 109 L Low-beam headlamps 107 M Front fog lamps 108 N Reserve fuel 246 on AMG vehicles Multifunction steering wheel 31 At a glance Multifunction steering wheel Function : Multifunction display ; Audio system/COMAND; see the separate operating instructions = ? Switches on the Voice Control System; see the separate operating instructions ? ~ Rejects or ends a call Exits phone book/redial memory 6 Makes or accepts a call Switches to the redial memory WX Adjusts the volume 8 Mute Page 196 Function A B 202 =; Selects a menu 9: Selects the submenu or scrolls through lists a Confirms selections and hides display messages % Back or deactivates the Voice Control System Page 198 198 32 Center console At a glance Center console Function : Page Audio system/COMAND; see the separate operating instructions Function Page M Dynamic driving package with sports mode 171 E Stowage compartment Ashtray Cigarette lighter Power socket 254 262 262 263 F Selector lever 142 D ; c Seat heating 98 = s Seat ventilation 98 ? 5 PARKTRONIC (Canada only) 175 £ Hazard warning lamps G Cup holder 259 109 H Stowage compartment 254 I Audio/COMAND controller J Selects the drive program A B 45 Indicator lamp 42 C u Rear window roller sunblind 261 144 Overhead control panel 33 At a glance Overhead control panel Function : ; = ? A B 2 u Switches the rear interior lighting on/off Page 113 | Switches the automatic interior lighting control on/off 112 p Switches the righthand reading lamp on/off 112 3 Opens/closes the sliding sunroof 3 Opens/closes the panorama roof with power tilt/sliding panel and roller sunblinds Function Page C Rear-view mirror 101 D Integrated electronic compass 275 Buttons for the garage door opener 273 E F Microphone for mbrace (emergency call system), telephone and the Voice Control System2 G F Roadside Assistance button (mbrace system) 267 p Switches the lefthand reading lamp on/off 112 c Switches the front interior lighting on/off 113 87 87 H ï Button for MB Info call (mbrace system) 268 I G SOS button (mbrace system) 266 The Voice Control System is only available together with COMAND. Observe the additional operating instructions. 34 Door control panel At a glance Door control panel Function Page : Opens the door 78 ; %& Unlocks/locks the vehicle 78 = Adjusts the seat electrically 94 ? r45= Stores settings for the seat, exterior mirrors and steering wheel 103 7Zö\ Adjusts and folds the exterior mirrors in/out electrically 101 W Opens/closes the side windows 83 n Activates/ deactivates the override feature for the side windows in the rear compartment 57 o Opens the trunk lid 81 A B C D Useful information .............................. Occupant safety .................................. Children in the vehicle ........................ Panic alarm .......................................... Driving safety systems ....................... Theft deterrent locking systems ....... 36 36 53 58 58 66 Safety 35 36 Occupant safety Useful information Safety i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). Occupant safety Overview of occupant safety In this section, you will learn the most important facts about the restraint system components of the vehicle. The restraint system consists of: Rseat belts Rchild restraint systems RLATCH-type (ISOFIX) child seat anchors Additional protection is provided by: RSRS (Supplemental Restraint System) head restraints/NECK-PRO luxury head restraints RAir bag system components with: - PASSENGER AIR BAG OFF indicator lamp - front-passenger seat with Occupant Classification System (OCS) The different air bag systems work independently of each other. The protective functions of the system work in conjunction with each other. Not all air bags are deployed in an accident. RNECK-PRO G WARNING Modifications to or work improperly conducted on restraint system components or their wiring, as well as tampering with interconnected electronic systems, can lead to the restraint systems no longer functioning as intended. Air bags or Emergency Tensioning Devices (ETDs), for example, could deploy inadvertently or fail to deploy in accidents although the deceleration threshold for air bag deployment is exceeded. Therefore, never modify the restraint systems. Do not tamper with electronic components or their software. i See "Children in the vehicle" (Y page 53) for more information on infants and children traveling with you in the vehicle and restraints for infants and children. SRS (Supplemental Restraint System) Introduction SRS consists of: Rthe 6 SRS warning lamp bags Rair bag control unit (with crash sensors) REmergency Tensioning Devices Rbelt force limiters SRS reduces the risk of occupants coming into contact with the vehicle's interior in the event of an accident. It can also reduce the effect of the forces to which occupants are subjected during an accident. Rair SRS warning lamp SRS functions are checked regularly when you switch on the ignition and when the engine is running. Therefore, malfunctions can be detected in good time. The 6 SRS warning lamp in the instrument cluster lights up when the ignition is switched on. It goes out no later than a few seconds after the engine is started. The SRS components are in operational readiness when the 6 SRS warning lamp is not lit while the engine is running . G WARNING The SRS self-check has detected a malfunction if the 6 SRS warning lamp: Rdoes not come on at all to go out approximately 4 seconds after the engine was started Rcomes on after the engine was started or while driving For your safety, Mercedes-Benz strongly recommends that you have the system checked as soon as possible at an authorized Mercedes-Benz Center. Otherwise the SRS may not be activated when it is needed in an accident, which could result in serious or fatal injury. The SRS might also deploy unexpectedly and unnecessarily which could also result in injury. In addition, improper work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be performed by qualified technicians. Contact an authorized Mercedes-Benz Center. If it is necessary to modify an air bag system to accommodate a person with disabilities, contact an authorized Mercedes-Benz Center for details. USA only: Call our Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) for details. Rfails Safety guidelines for seat belts, Emergency Tensioning Devices (ETDs) and air bags G WARNING RDamaged seat belts or seat belts that have been subjected to stress in an accident must be replaced. Their anchoring points must also be checked. Only use seat belts installed or supplied by an authorized Mercedes-Benz Center. RAir bags and pyrotechnic Emergency Tensioning Devices (ETDs) contain perchlorate material, which may require special handling and regard for the environment. Check your national disposal guidelines. California residents, see www.dtsc.ca.gov/HazardousWaste/ Perchlorate/index.cfm. RAir bags and ETDs are designed to function on a one-time-only basis. An air bag or ETD that has deployed must be replaced. RDo not pass seat belts over sharp edges. They could tear. RDo not make any modification that could change the effectiveness of the seat belts. RDo not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection. RNo modifications of any kind may be made to any components or wiring of the SRS. RDo not change or remove any component or part of the SRS. RDo not install additional trim material, seat covers, badges, etc. over the steering wheel hub, front-passenger front air bag cover, outer sides of the seat backrests, door trim panels, or door frame trims. RDo not install additional electrical/ electronic equipment on or near SRS components and wiring. RKeep area between air bags and occupants free of objects (e.g. packages, purses, umbrellas, etc.). RDo not hang items such as coat hangers from the coat hooks or handles over the door. These items may be thrown around in the vehicle and cause head and other injuries when the window curtain air bag is deployed. RAir bag system components will be hot after an air bag has inflated. Do not touch them. RNever place your feet on the instrument panel, dashboard, or on the seat. Always keep both feet on the floor in front of the seat. RImproper repair work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be Z 37 Safety Occupant safety Safety 38 Occupant safety performed by qualified technicians. Contact an authorized Mercedes-Benz Center. RFor your protection and the protection of others, when scrapping the air bag unit or ETD, our safety instructions must be followed. These instructions are available from any authorized Mercedes-Benz Center. RGiven the considerable deployment speed, required inflation volume, and the material of the air bags, there is the possibility of abrasions or other, potentially more serious injuries resulting from air bag deployment. If you sell your vehicle, Mercedes-Benz strongly recommends that you inform the subsequent owner that the vehicle is equipped with SRS. Also, refer them to the applicable section in the Operator's Manual. Air bags Important safety notes G WARNING Air bags are designed to reduce the incidence of injuries and fatalities in certain situations: Rfrontal impacts (driver's and frontpassenger front air bags and driver's knee bag) Rside impacts (side impact air bags, window curtain air bags and pelvis air bags) However, no system available today can completely eliminate injuries and fatalities. When the air bags are deployed, a small amount of powder is released. The powder generally does not constitute a health hazard and does not indicate that there is a fire in the vehicle. In order to prevent potential breathing difficulties, you should leave the vehicle as soon as it is safe to do so. If you have any breathing difficulty but cannot get out of the vehicle after the air bag inflates, then get fresh air by opening a window or door. G WARNING To reduce the risk of injuries during front air bag inflation, the driver and front-passenger must always be seated correctly and have their seat belts fastened accordingly. For maximum protection in the event of a collision, you must always be in the normal seat position with your back against the backrest. Fasten your seat belt and make sure that it is correctly positioned on your body. Since the air bag inflates with considerable speed and force, a proper seating position and correct positioning of the hands on the steering wheel will help to keep you at a safe distance from the air bag. Occupants who are not wearing their seat belt, are not seated properly or are too close to the air bag can be seriously injured or killed by an air bag as it inflates with great force instantaneously: RSit with the seat belt properly fastened in a position that is as upright as possible with your back against the seat backrest. RMove the driver's seat as far back as possible, still permitting proper operation of vehicle controls. The distance from the center of the driver's chest to the center of the air bag cover on the steering wheel must be at least 10 inches (25 cm) or more. You should be able to accomplish this by adjusting the seat and steering wheel. If you have any difficulties, please contact an authorized Mercedes-Benz Center. RDo not lean your head or chest close to the steering wheel or dashboard. ROnly hold the steering wheel by the rim. Placing hands and arms inside the rim can increase the risk and potential severity of hand/arm injury when the driver front air bag inflates. RAdjust the front-passenger seat as far back as possible from the dashboard when the seat is occupied. ROccupants, especially children, should never place their bodies or lean their heads in the area of the door where the side impact air bag inflates. This could result in serious injuries or death should the side impact air bag be deployed. Always sit as upright as possible, wear the seat belt properly and use an appropriately sized child restraint, infant restraint or booster seat recommended for the size and weight of the child. Failure to follow these instructions can result in severe injuries to you or other occupants. If you sell your vehicle, it is important that you make the buyer aware of this safety information. Be sure to give the buyer this Operator's Manual. G WARNING Accident research shows that the safest place for children in an automobile is in a rear seat. A side impact air bag related injury may occur if occupants, especially children, are not properly seated or restrained when next to a side impact air bag which needs to deploy rapidly in a side impact in order to do its job. To help avoid the possibility of injury, please follow these guidelines: (1) (2) Always sit as upright as possible and use the seat belts properly. Make sure that children 12 years old and under use an appropriately sized child restraint, infant restraint, or booster seat recommended for the size and weight of the child. Always wear seat belts properly. The air bags are only deployed if the air bag control unit detects the need for deployment. Only in the event of such a situation will they provide their supplemental protection. The driver and passenger should always wear their seat belts. Otherwise, it is not possible for the air bags to provide their supplemental protection. In the event of other types of impacts and impacts below air bag deployment thresholds, the air bags will not deploy. The driver and passengers will then be protected to the extent possible by a properly fastened seat belt. A properly fastened seat belt is also needed to provide the best possible protection in a rollover. Air bags provide additional protection; they are not, however, a substitute for seat belts. All vehicle occupants must fasten their seat belts regardless of whether your vehicle is equipped with air bags or not. It is important for your safety and that of your passenger to have deployed air bags replaced and to have any malfunctioning air bags repaired. This will help to make sure the air bags continue to perform their protective function for the vehicle occupants in the event of a crash. Front air bags The front air bags increase protection for the driver's and front-passenger's head and chest. Driver's air bag : deploys in front of the steering wheel; front-passenger front air bag ; deploys in front of and above the glove box. They are deployed: Rin the event of certain frontal impacts the system determines that air bag deployment can offer additional protection to that provided by the seat belt Rif the seat belt is fastened Rindependently of other air bags in the vehicle Rif Z 39 Safety Occupant safety Safety 40 Occupant safety Your vehicle has adaptive, two-stage front air bags. In the event of a collision, the air bag control unit evaluates the vehicle deceleration. In the first deployment stage, the front air bag is filled with enough propellant gas to reduce the risk of injuries. The front air bag is fully deployed if a second deployment threshold is exceeded within a few milliseconds. The deployment of the front-passenger front air bag is also influenced by the weight category of the front passenger, which is determined by the Occupant Classification System (OCS) (Y page 42). The lighter the passenger side occupant, the higher the vehicle deceleration rate required (predicted at the start of the impact) for second stage inflation of the front-passenger front air bag. In the second stage, the front air bags are inflated with the maximum amount of propellant gas available. The front air bags are not deployed in situations where a low impact severity is predicted. You will then be protected by the fastened seat belt. The front-passenger front air bag will only deploy if: Rthe system, based on the OCS weight sensor readings, detects that the frontpassenger seat is occupied. Rthe 45 indicator lamp in the center console is not lit, (Y page 42). Rthe air bag control unit predicts a high impact severity. Driver's knee bag Driver's knee bag : provides additional protection for the driver against: Rknee injuries injuries Rlower leg injuries Driver's knee bag : deploys below the steering wheel. During a frontal impact, if the system determines that air bag deployment can offer additional protection to that provided by the seat belt, driver's knee bag : is deployed along with the driver's air bag. The driver's knee bag : operates best in conjunction with a properly positioned and fastened seat belt. Rthigh Side impact air bags G WARNING The pressure sensors for side impact air bag control are located in the doors. Do not modify any components of the doors or door trim panels including, for example, the addition of door speakers. Improper repair work on the doors or the modification or addition of components to the doors create a risk of rendering the side impact air bags inoperative or causing unintended air bag deployment. Work on the doors must therefore only be performed by qualified technicians. Contact an authorized Mercedes-Benz Center. G WARNING Only use seat covers which have been tested and approved by Mercedes-Benz for your vehicle model. Using seat covers or other seat coverings can cause a malfunction of the side impact air bags and/or the pelvis air bags. Contact an authorized Mercedes-Benz Center for availability. When deployed, the side impact air bags offer additional protection for the thorax of the vehicle occupants on the side of the vehicle on which the impact occurs. However, they do not protect the: Rhead Rneck Rarms If the OCS detects that the front-passenger seat is not occupied and the front-passenger seat belt is not fastened (the belt tongue is not engaged in the seat belt buckle), the side impact air bag on the front-passenger side will not deploy. The side impact air bag on the front-passenger side will deploy if the frontpassenger seat belt is fastened, regardless of whether the front-passenger seat is occupied or not. Pelvis air bags Pelvis air bags are not available for AMG vehicles. G WARNING Only use seat covers which have been tested and approved by Mercedes-Benz for your vehicle model. Using seat covers or other seat coverings can cause a malfunction of the side impact air bags and/or the pelvis air bags. Contact an authorized Mercedes-Benz Center for availability. Pelvis air bag deployment enhances the level of protection of the vehicle occupants on the side of the vehicle on which the impact occurs. Front side impact air bags : and rear side impact air bags ; deploy next to the outer seat cushions. The side impact air bags are deployed: Ron the side on which an impact occurs the start of an accident with a high rate of lateral vehicle deceleration or acceleration, e.g. in a side impact Rindependently of seat belt use Rindependently of the front air bags Rindependently of the ETDs Side impact air bags will not deploy in side impacts which do not exceed the system's preset deployment thresholds for lateral acceleration/deceleration. You will then be protected by the fastened seat belt. Rat Pelvis air bags : deploy next to and below the outer seat cushions. They are deployed: Ron the side on which an impact occurs Rat the start of an accident with a high rate of lateral vehicle deceleration or acceleration, e.g. in a side impact Rindependently of seat belt use Z 41 Safety Occupant safety Safety 42 Occupant safety Rindependently Rindependently Rindependently Rindependently of the front air bags of the ETDs Pelvis air bags : will not deploy in side impacts which do not exceed the system's preset deployment thresholds for lateral acceleration/deceleration. You will then be protected by the fastened seat belt. If the OCS detects that the front-passenger seat is not occupied and the front-passenger seat belt is not fastened (the belt tongue is not engaged in the seat belt buckle), the pelvis air bag on the front-passenger side will not deploy. The pelvis air bag on the frontpassenger side will deploy if the frontpassenger seat belt is fastened, regardless of whether the front-passenger seat is occupied or not. Window curtain air bags The window curtain air bags enhance the level of protection for the head, but not chest or arms, of the vehicle occupants on the side of the vehicle on which the impact occurs. The window curtain air bags are integrated into the side of the roof frame and deploy in the area from the A-pillar to the C-pillar. of seat belt use of the front air bags Window curtain air bags : will not deploy in impacts with deceleration rates which do not exceed the system's preset deployment thresholds for vehicle deceleration or acceleration. You will then be protected by the fastened seat belt. Occupant Classification System (OCS) How the occupant classification system works The Occupant Classification System (OCS) categorizes the occupant on the frontpassenger seat by means of a weight sensor. The front-passenger front air bag is deactivated automatically for certain weight categories. The 45 indicator lamp shows you the current status. If the 45 indicator lamp is illuminated, the front-passenger front air bag is deactivated. The system does not deactivate: Rthe side impact air bag pelvis air bag Rthe window curtain air bag Rthe Emergency Tensioning Devices To be classified correctly, the front passenger must sit: Rthe Rwith the seat belt fastened correctly a position that is as upright as possible with their back against the seat backrest Rwith their feet on the floor If the front-passenger's weight is transferred to another object in the vehicle (e.g. by leaning on armrests), OCS may not be able to approximate the occupant's weight category. If the front-passenger seat, the seat cover or the seat cushion are damaged, have the necessary repair work carried out at an authorized Mercedes-Benz Center. Rin Window curtain air bags : are deployed: Ron the side on which an impact occurs the start of an accident with a high rate of lateral vehicle deceleration or acceleration, e.g. in a side impact Rregardless of whether the front-passenger seat is occupied Rat For safety reasons, Mercedes-Benz recommends that you only use seat accessories which have been approved by Mercedes-Benz. Both the driver and the passenger should always use the 45 indicator lamp as an indication of whether or not the passenger is properly positioned. G WARNING If the 45 indicator lamp illuminates when an adult or someone larger than a small individual is in the front passenger seat, have the front passenger reposition himself or herself in the seat until the 45 indicator lamp goes out. In the event of a collision, the air bag control unit will not allow front passenger front air bag deployment when the OCS has classified the front passenger seat occupant as weighing as much as or less than a typical 12-month-old child in a standard child restraint or if the front passenger seat is classified as being empty. When the OCS senses that the front passenger seat occupant is classified as being up to or less than the weight of a typical 12-month-old child in a standard child restraint, the 45 indicator lamp will illuminate when the engine is started and remain illuminated. This indicates that the front passenger front air bag is deactivated. When the OCS senses that the front passenger seat is classified as being empty, the 45 indicator lamp will illuminate when the engine is started and remain illuminated. This indicates that the front passenger front air bag is deactivated. When the OCS senses that the front passenger seat occupant is classified as being heavier than the weight of a typical 12month-old child seated in a standard child restraint or as being a small individual (such as a young teenager or a small adult), the 45 indicator lamp will illuminate for approximately 6 seconds when the engine is started. Depending on occupant weight sensor readings from the seat, it will then remain illuminated or go out. With the 45 indicator lamp illuminated, the front passenger front air bag is deactivated. With the 45 indicator lamp out, the front passenger front air bag is activated. When the OCS senses that the front passenger seat occupant is classified as an adult or someone larger than a small individual, the 45 indicator lamp will illuminate for approximately six seconds when the engine is started and then go out. This indicates that the front passenger front air bag is activated. If the 45 indicator lamp is illuminated, the front passenger front air bag is deactivated and will not be deployed. If the 45 indicator lamp is not illuminated, the front passenger front air bag is activated and will be deployed Rin the event of certain frontal impacts the impact exceeds a predetermined triggering threshold Rindependent of the side impact air bag or pelvis air bag If the front passenger front air bag is deployed, the rate of inflation will be influenced by Rif Rthe rate of vehicle deceleration as assessed by the air bag control unit front passenger's weight category as identified by the OCS Rthe For further information, see "Air bag display messages" (Y page 221). G WARNING According to accident statistics, children are safer when properly restrained on the rear seats than on the front-passenger seat. Thus, we strongly recommend that children be placed in the rear seats whenever possible. Regardless of seating position, children 12 years old and under must be seated and properly secured in an appropriate infant restraint, toddler restraint, or booster seat Z 43 Safety Occupant safety Safety 44 Occupant safety recommended for the size and weight of the child. The infant or child restraint must be properly secured with the vehicle's seat belt, the seat belt and Top Tether strap, or lower anchors and Top Tether strap, fully in accordance with the child seat manufacturer's instructions. Occupants, especially children, should always sit as upright as possible, wear the seat belt properly and use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. Children can be killed or seriously injured by an inflating air bag. Note the following important information when circumstances require you to place a child in the frontpassenger seat: RYour vehicle is equipped with air bag technology designed to deactivate the front-passenger front air bag in your vehicle when the system senses the weight of a typical 12-month-old child or less along with the weight of a standard appropriate child restraint on the front-passenger seat. RA child in a rear-facing child restraint on the front-passenger seat will be seriously injured or even killed if the front-passenger front air bag inflates in a collision which could occur under some circumstances, even with the air bag technology installed in your vehicle. The only means to eliminate this risk completely is never to place a child in a rear-facing child restraint in the frontpassenger seat. We therefore strongly recommend that you always place a child in a rear-facing child restraint on the rear seat. RIf you install a rear-facing child restraint on the front-passenger seat, make sure the 45 indicator lamp is illuminated, indicating that the front-passenger front air bag is deactivated. Should the 45 indicator lamp not illuminate or go out while the restraint is installed, please check installation. Periodically check the 45 indicator lamp while driving to make sure that the 45 indicator lamp is illuminated. If the 45 indicator lamp goes out or remains out, do not transport a child on the front-passenger seat until the system has been repaired. A child in a rear-facing child restraint on the front-passenger seat will be seriously injured or even killed if the front-passenger front air bag inflates. RIf you place a child in a forward-facing child restraint on the front-passenger seat: - move the seat as far back as possible - use the proper child restraint recommended for the age, size and weight of the child - secure child restraint with the vehicle's seat belt according to the child seat manufacturer's instructions RFor children larger than the typical 12month-old child, the front-passenger front air bag may or may not be activated. If the driver's air bag deploys, this does not mean that the front-passenger front air bag also has to deploy. The OCS may have detected that the seat: Rwas empty or occupied by a person with a weight of up to or less than that of a typical 12-month-old child seated in a standard child restraint Rwas occupied by a small individual, such as a young teenager or a small adult Rwas occupied by a child in a child restraint system, whose weight is greater than that of a typical 12-month-old child. These are examples of when the OCS deactivates the front-passenger front air bag. Deactivation takes place although the collision fulfills the criteria for deploying the driver's air bag. Occupant safety 45 System self-test The 45 indicator lamp illuminates when you: the SmartKey to position 1 or 2 in the ignition lock Ron vehicles with KEYLESS-GO, press the Start/Stop button once or twice If an adult occupant is properly sitting on the passenger seat and the OCS classifies the occupant as an adult, the 45 indicator lamp illuminates and goes out again after approximately 6 seconds. If the seat is not occupied and the OCS classifies the front passenger seat as being unoccupied, the 45 indicator lamp will illuminate and not go out. If the SmartKey has been removed from the ignition lock or is in position 0, indicator lamp 45: does not light up. G WARNING If the red 6 SRS warning lamp in the instrument cluster and the 45 indicator lamp light up simultaneously, the OCS is malfunctioning. The front passenger front air bag will be deactivated in this case. Have the system checked by qualified technicians as soon as possible. Contact an authorized Mercedes-Benz Center. Only have the seat repaired or replaced at an authorized Mercedes-Benz Center. In order to ensure proper operation of the air bag system and OCS: RSit with the seat belt properly fastened in a position that is as upright as possible with your back against the seat backrest. RWhen seated, a passenger should not position him/herself in such a way as to cause the passenger's weight to be lifted from the seat cushion as this may result in the OCS being unable to correctly approximate the passenger's weight category. RRead and observe all warnings in this chapter. G WARNING If the 4 5 indicator lamp does not illuminate, the system is not functioning. You must contact an authorized Mercedes-Benz Center before seating any child on the front passenger seat. For more information, see "Problems with the Occupant Classification System" (Y page 46). G WARNING Never place anything between seat cushion and child seat (e.g. a pillow), since it reduces the effectiveness of the OCS. The underside and rear side child restraint system must be placed entirely on the seat cushion and the backrest of the front-passenger seat backrest. If necessary, adjust the tilt of the passenger seat backrest. An incorrectly mounted child seat could cause injuries to the child in case of an accident, instead of increasing protection for the child. Follow the manufacturer's instructions for installation of child restraint systems. Z Safety Rturn 46 Occupant safety Safety Problems with the occupant classification system Problem Possible causes/consequences and M Solutions The 45 indicator lamp illuminates and remains illuminated. The person on the front-passenger seat: The OCS is malfunctioning. X Have the OCS checked as soon as possible at an authorized Mercedes-Benz Center. X Observe the additional display messages in the multifunction display (Y page 221). Rhas the weight of a typical adult Rhas been determined by the system not to be a child. G WARNING If the 45 indicator lamp illuminates and remains illuminated when the weight of a typical adult or someone larger than a small individual has been detected on the passenger seat, do not allow any occupant to use the passenger seat until the system has been repaired. Problem Possible causes/consequences and M Solutions The 45 The OCS is malfunctioning. indicator lamp does not X Make sure there is nothing between the seat cushion and the illuminate and/or does child seat. not remain illuminated. X Check the installation of the child restraint system. The front-passenger X Make sure that no objects are applying additional weight onto seat is: the seat. Runoccupied X If the 45 indicator lamp does not illuminate, have the Roccupied with a OCS checked as soon as possible at an authorized Mercedesweight up to or less Benz Center. Do not transport a child on the front-passenger than a typical 12seat as long as the OCS is not functioning. month-old child in a X Observe the additional display messages in the multifunction standard child display (Y page 221). restraint system G WARNING If the 45 indicator lamp does not illuminate or remains out with the weight of a typical 12-month-old child in a standard child restraint or less, or is unoccupied, on the front-passenger seat, do not transport a child on the front-passenger seat until the system has been repaired. Occupant safety NECK-PRO head restraints/NECK-PRO luxury head restraints increase protection of the driver's and front-passenger's head and neck. In the event of a rear collision of a certain severity, the NECK-PRO head restraints/NECK-PRO luxury head restraints on the driver's and front-passenger seats are moved forwards and upwards. This provides better head support. G WARNING Do not attach any objects (e.g. a coat hanger) to the NECK-PRO head restraints/NECK-PRO luxury head restraints. Otherwise, the NECKPRO head restraints/NECK-PRO luxury head restraints may not function properly and in the event of a rear-end collision may not offer the protection they are designed to provide. G WARNING Seat or head restraint covers can cause a malfunction when the NECK-PRO head restraints/NECK PRO luxury head restraints are activated or when the side impact air bags or pelvis air bags are deployed, or they can prevent this completely. The NECK-PRO head restraints/NECK PRO luxury head restraints or side impact air bags/pelvis air bags can therefore not provide the intended protection. Do not use any seat or head restraint covers. If the NECK-PRO head restraints/NECK-PRO luxury head restraints have been triggered in an accident, reset the NECK-PRO head restraints/NECK-PRO luxury head restraints on the driver's and front-passenger seats (Y page 47). Otherwise, the additional protection will not be available in the event of another rear-end collision. NECK-PRO head restraints/NECK-PRO luxury head restraints that have been triggered are moved forwards and can no longer be adjusted. G WARNING For your protection, drive only with properly positioned head restraints. Adjust the head restraint so that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will reduce the potential for injury to the head and neck in the event of an accident or similar situation. Resetting triggered NECK-PRO head restraints/NECK-PRO luxury head restraints Important safety notes G WARNING For reasons of safety, have the NECK-PRO head restraints/NECK-PRO luxury head restraints checked at an authorized Mercedes-Benz Center after a rear-end collision. G WARNING When pushing back the NECK-PRO head restraint cushion, make sure your fingers do not become caught between the head restraint cushion and the cover. Failure to observe this could result in injuries. NECK-PRO head restraints i Resetting the NECK-PRO head restraints requires a lot of strength. If you have difficulty resetting the NECK-PRO head restraints, have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Z Safety NECK-PRO head restraints/NECKPRO luxury head restraints (except AMG vehicles) 47 Occupant safety Safety 48 X Tilt the top of the NECK-PRO head restraint cushion forwards in the direction of arrow :. X Push the NECK-PRO head restraint cushion down in the direction of arrow ; as far as it will go. X Firmly push the NECK-PRO head restraint cushion back in the direction of arrow = until the cushion engages. X Repeat this procedure for the second NECK-PRO head restraint. NECK-PRO luxury head restraints i If you have difficulty resetting the NECKPRO luxury head restraints, have this work carried out at a qualified specialist workshop, e.g. an authorized MercedesBenz Center. X Remove resetting tool : from the vehicle document wallet. X Slide resetting tool : into guide ; between the NECK-PRO luxury head restraint and the rear cover of the head restraint. X Push resetting tool : downwards until you hear the head restraint deployment mechanism engage. X Pull out resetting tool :. X Firmly press the NECK-PRO luxury head restraint cushion back = until it engages. X Repeat this procedure for the second NECK-PRO luxury head restraint. X Put resetting tool : back into the vehicle document wallet. Seat belts Important safety notes The use of seat belts and infant and child restraint systems is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Even where this is not the case, all vehicle occupants should have their seat belts fastened when the vehicle is in motion. i For further information on infants and children traveling in the vehicle and on infant and child restraint systems, see "Children in the vehicle" (Y page 53). G WARNING Always fasten your seat belt before driving off. Always make sure all of your passengers are properly restrained. You and your passengers should always wear seat belts. Failure to wear and properly fasten and position your seat belt greatly increases your risk of injuries and their likely severity in an accident. If you are ever in an accident, your injuries can be considerably more severe without your seat belt properly buckled. Without your seat belt buckled, you are much more likely to hit the interior of the vehicle or be ejected from it. You can be seriously injured or killed. Occupant safety G WARNING Never ride in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide under the seat belt in a collision. If you slide under it, the seat belt would apply force at the abdomen or neck. That could cause serious or even fatal injuries. The seat backrest and seat belt provide the best restraint when the wearer is in a position that is as upright as possible and the seat belt is properly positioned on the body. G WARNING Never let more people ride in the vehicle than there are seat belts available. Make sure everyone riding in the vehicle is correctly restrained with a separate seat belt. Never use a seat belt for more than one person at a time. G WARNING Damaged seat belts or seat belts that have been subjected to stress in an accident must be replaced and their anchoring points must also be checked. Only use seat belts which have been approved by Mercedes-Benz. Do not make any modifications to the seat belts. This can lead to unintended activation of the ETDs or to their failure to activate when necessary. Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection. Have all work carried out only by qualified technicians. Contact an authorized Mercedes-Benz Center. Correct use of the seat belts G WARNING USE SEAT BELTS PROPERLY RSeat belts can only work when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious injuries in the event of an accident. REach occupant should wear their seat belt at all times, because seat belts help reduce the likelihood of and potential severity of injuries in accidents, including rollovers. The integrated restraint system includes SRS (driver front air bag, driver's side knee bag, front-passenger front air bag, side impact air bags, pelvis air bags, window curtain air bags for the side windows), Emergency Tensioning Devices, seat belt force limiters, and front seat knee bolsters. The system is designed to enhance the protection offered to properly belted occupants in certain frontal (front air bags, driver's side knee bag, and ETDs) and side (side impact air bags, pelvis air bags, window curtain air bags, and ETDs) impacts which exceed preset deployment thresholds. RNever wear the shoulder belt under your arm, across your neck or off your shoulder. In a frontal crash, your body would move too far forward. That would increase the chance of head and neck injuries. The seat belt would also apply too much force to the ribs or abdomen, which could severely injure internal organs such as your liver or spleen. Adjust the seat belt so that the shoulder section is located as close as possible to the middle of the shoulder. It should not touch the neck. Never pass the shoulder portion of the seat belt under your arm. RPosition the lap belt as low as possible on your hips and not across the abdomen. If the lap belt is positioned across your Z Safety In the same crash, the possibility of injury or death is lessened if you are properly wearing your seat belt. The air bags can only protect as intended if the occupants are properly wearing their seat belts. 49 Safety 50 Occupant safety abdomen, it could cause serious injuries in a crash. RNever wear seat belts over rigid or breakable objects in or on your clothing, such as eyeglasses, pens, keys etc., as these might cause injuries. RMake sure the seat belt is always fitted snugly. Take special care of this when wearing loose clothing. RNever use a seat belt for more than one person at a time. Do not fasten a seat belt around a person and another person or other objects at the same time. RSeat belts should not be worn twisted. In a crash, you would not have the full width of the seat belt to distribute impact forces. The twisted seat belt against your body could cause injuries. RPregnant women should also always use a lap-shoulder belt. The lap belt portion should be positioned as low as possible on the hips to avoid any possible pressure on the abdomen. RPlace the seat backrest in a position that is as upright as possible. RCheck your seat belt during travel to make sure it is properly positioned. RNever place your feet on the instrument panel, dashboard, or on the seat. Always keep both feet on the floor in front of the seat. RWhen using a seat belt to secure infant restraints, toddler restraints, or children in booster seats, always follow the child seat manufacturer's instructions. G WARNING Do not pass seat belts over sharp edges. They could tear. Do not allow the seat belt to get caught in the door or in the seat adjustment mechanism. This could damage the seat belt. Never attempt to make modifications to seat belts. This could impair the effectiveness of the seat belts. Fastening seat belts G WARNING According to accident statistics, children are safer when properly restrained on the rear seats than on the front-passenger seat. Thus, we strongly recommend that children be placed in the rear seat whenever possible. Regardless of seating position, children 12 years old and under must be seated and properly secured in an appropriately sized child restraint system or booster seat recommended for the size and weight of the child. For additional information, see the "Children in the vehicle" section. A child's risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint. X Adjust the seat and move the backrest to an almost vertical position (Y page 92). X Pull the seat belt smoothly through belt sash guide :. X Without twisting it, guide the shoulder section of the seat belt across the middle of your shoulder and the lap section across your hips. X Engage belt tongue ; in buckle =. Occupant safety If necessary, adjust the seat belt to the appropriate height (Y page 51). X If necessary, pull upwards on the shoulder section of the seat belt to tighten the belt across your body. Releasing seat belts All seat belts except the driver's seat belt are equipped with a special seat belt retractor to securely fasten child restraint systems in the vehicle. For further information on special seat belt retractors, see (Y page 55). For more information about releasing the seat belt with release button ?, see "Releasing seat belts" (Y page 51). ! Make sure that the seat belt is fully rolled Belt height adjustment You can adjust the seat belt height on the driver's seat and the front-passenger seat. Adjust the height so that the upper part of the seat belt is routed across the center of your shoulder. X To raise: slide the belt sash guide upwards. The belt sash guide engages in various positions. X To lower: press and hold belt sash guide release :. X Slide the belt sash guide downwards. X Release belt sash guide release : and make sure that the belt sash guide has engaged. X Press release button ?(Y page 50) and guide belt tongue ; back towards belt sash guide :. up. Otherwise, the seat belt or belt tongue will be trapped in the door or in the seat mechanism. This could damage the door, the door trim panel and the seat belt. Damaged seat belts can no longer fulfill their protective function and must be replaced. Consult an authorized MercedesBenz Center. Belt warning for the driver and front passenger Regardless of whether the driver and front passenger have fastened their seat belts already, the 7 seat belt warning lamp lights up for 6 seconds after every engine start. It then goes out if the driver and the front passenger have fastened their seat belts. If the driver's seat belt is not fastened after the engine is started, an additional warning tone will sound. The warning tone goes out after approximately six seconds or once the driver's seat belt is fastened. If the driver or front passenger have not fastened their seat belt after 6 seconds and the doors are closed, the 7 seat belt warning lamp lights up. Runtil the driver or the front passenger have fastened their seat belts Rif a vehicle speed of 15 mph (25 km/h) is exceeded once, a warning tone with increasing intensity sounds additionally for a maximum of 60 seconds or until the driver or front passenger have fastened their seat belts. If the driver or front passenger undo their seat belts during the journey, the 7 seat belt warning lamp lights up and the warning tone sounds again. Z Safety X 51 Safety 52 Occupant safety The warning tone ceases even if the driver or front passenger have still not fastened their seat belt after 60 seconds. The 7 seat belt warning lamp stops flashing but continues to be lit. Once the vehicle is stationary, the warning tone is reactivated and the 7 seat belt warning lamp starts to flash again if the vehicle speed exceeds 15 mph (25 km/h) once. The 7 seat belt warning lamp only goes out if: Rboth the driver and the front passenger have fastened their seat belts. or Rthe vehicle is stationary and a door is open. i For more information on the 7 seat belt warning lamp, see "Warning and indicator lamps in the instrument cluster, seat belt" (Y page 239). Emergency Tensioning Devices, belt force limiters The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the body. The ETDs do not correct incorrect seat positions or incorrectly fastened seat belts. The ETDs do not pull vehicle occupants back towards the backrest. Seat belt force limiters, when triggered, help to reduce the peak force exerted by the seat belt on the vehicle occupant. The seat belt force limiters for the front seats are synchronized with the front air bags. These take on a part of the deceleration force. Thus, the force exerted on the occupant is distributed over a greater area. The ETDs can only be activated when: Rthe ignition is switched on. restraint systems are operational; see "SRS warning lamp" (Y page 36). Rthe Rthe belt tongue is engaged in the buckle on each of the lap-shoulder belts in the front. front-passenger seat is occupied and the belt tongue is engaged in the buckle on the front-passenger side. The ETDs on the outside seats in the rear compartment are triggered independently of the lock status of the seat belts. The ETDs are triggered depending on the type and severity of an accident: Rthe Rif, in the event of a head-on or rear-end collision, the vehicle decelerates or accelerates rapidly in a longitudinal direction during the initial stages of the impact Rif, in the event of a side impact, on the side opposite the impact the vehicle decelerates or accelerates rapidly in a lateral direction If the air bags are deployed, you will hear a bang, and a small amount of powder may also be released. Only in rare cases will the bang affect your hearing. The powder that is released generally does not constitute a health hazard. The 6 SRS warning lamp lights up. G WARNING Pyrotechnic ETDs that were activated must be replaced. For your safety, when disposing of the pyrotechnic ETDs always follow our safety instructions. These are available at any authorized Mercedes-Benz Center. ! If the front-passenger seat is not occupied, do not engage the seat belt tongue in the buckle on the frontpassenger seat. Otherwise, the Emergency Tensioning Device could be triggered in the event of an accident. Children in the vehicle Child restraint systems Important safety notes We recommend that all infants and children be properly secured in an infant or child restraint system at all times while the vehicle is in motion. The use of seat belts and infant and child restraint systems is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Infants and children must always be seated in an appropriate infant or child restraint system recommended for the size and weight of the child. The infant or child restraint system must be properly secured in accordance with the manufacturer's instructions. All infant or child restraint systems must meet U.S. Federal Motor Vehicle Safety Standards 213 and 225 and Canadian Motor Vehicle Safety Standards 213 and 210.2. An information label on the child restraint system indicates whether it meets these standards. This information is also provided in the installation instructions supplied with the child restraint system. Always read and follow the manufacturer's instructions when using an infant or child restraint system or booster seat. Observe all warning signs in the vehicle interior and on the infant or child restraint. G WARNING According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating position. Thus, we strongly recommend that children be placed in the rear seats whenever possible. Regardless of seating position, children 12 years old and under must be seated and properly secured in an appropriate infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. The infant or child restraint must be properly secured with the vehicle's seat belt, the seat belt and top tether strap, or lower anchors and top tether strap, fully in accordance with the child seat manufacturer's instructions. Occupants, especially children, should always sit as upright as possible, wear the seat belt properly and use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. Children can be killed or seriously injured by an inflating air bag. Note the following important information when circumstances require you to place a child in the front passenger seat: RYour vehicle is equipped with air bag technology designed to deactivate the front passenger front air bag in your vehicle when the system senses the weight of a typical 12-month-old child or less along with the weight of a standard appropriate child restraint on the front passenger seat. RFor children larger than the typical 12-month-old child, the front passenger front air bag may or may not be activated. Always make sure the 4 5 indicator lamp is illuminated, indicating that the front passenger front air bag is deactivated. RA child in a rear-facing child restraint on the front passenger seat will be seriously injured or even killed if the front passenger front air bag inflates in a collision which could occur under some circumstances, even with the air bag technology installed in your vehicle. The only means to completely eliminate this risk is to never place a child in a rear-facing child restraint in the front seat. We therefore strongly recommend that you always place a child in a rear-facing child restraint in a backseat. RIf you must install a rear-facing child restraint on the front passenger seat because circumstances require you to do so, make sure the 4 5 indicator lamp is illuminated, indicating that the front Z 53 Safety Children in the vehicle Safety 54 Children in the vehicle passenger front air bag is deactivated. Should the 4 5 indicator lamp not illuminate or go out while the restraint is installed, please check installation. Periodically check the 4 5 indicator lamp while driving to make sure the 4 5 indicator lamp is illuminated. If the 4 5 indicator lamp goes out or remains out, do not transport a child on the front passenger seat until the system has been repaired. A child in a rear-facing child restraint on the front passenger seat will be seriously injured or even killed if the front passenger front air bag inflates. RIf you have to place a child in a forwardfacing child restraint on the front passenger seat, move the seat as far back as possible, use the proper child restraint recommended for the age, size and weight of the child, and secure child restraint with the vehicle's seat belt according to the child seat manufacturer's instructions. G WARNING Infants and small children should never share a seat belt with another occupant. During an accident, they could be crushed between the occupant and seat belt. A child's risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint. Children too big for a toddler restraint must ride in seats using regular seat belts. Position the shoulder belt across the chest and shoulder, not face or neck. A booster seat may be necessary to achieve proper seat belt positioning for children over 41 lb (18 kg) until they reach a height where a lap/shoulder belt fits properly without a booster. When the child restraint is not in use, remove it from the vehicle or secure it with the seat belt to prevent the child restraint from becoming a projectile in the event of an accident. If an infant or child is traveling in the vehicle: X Secure the infant or child with an appropriate infant or child restraint recommended for the child's age and weight. X Make sure that the infant or child is properly secured at all times while the vehicle is in motion. G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. The children could: Rinjure themselves on parts of the vehicle seriously or fatally injured through excessive exposure to extreme heat or cold Rinjure themselves or cause an accident with vehicle equipment that can be operated even if the SmartKey is removed from the ignition lock or removed from the vehicle, such as seat adjustment, steering wheel adjustment, or the memory function If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and the child could be burned on these parts. Rbe G WARNING Do not carry heavy or hard objects in the passenger compartment or trunk unless they are firmly secured in place. Children in the vehicle Rstrong braking maneuvers Rsudden changes of direction Ran accident Special seat belt retractor All seat belts except the driver's seat belt are equipped with a special seat belt retractor. When activated, the special seat belt retractor ensures the seat belt will not slacken once the child restraint system has been secured. Installing a child restraint system: X Always comply with the manufacturer's installation instructions. X Pull the seat belt smoothly from the inertia reel. X Engage the seat belt tongue in the belt buckle. Activating the special seat belt retractor: X Pull the seat belt out fully and let the inertia reel retract it again. While the seat belt is retracting, you should hear a ratcheting sound. The special seat belt retractor is enabled. X Push down on the child restraint system to take up any slack. Removing a child restraint system/ deactivating the special seat belt retractor: X Always comply with the manufacturer's installation instructions. X Press the seat belt release button and guide the belt tongue to the belt outlet. The special seat belt retractor is deactivated. G WARNING LATCH-type (ISOFIX) child seat anchors in the rear G WARNING Children that are too large for a child restraint must travel in seats using normal seat belts. Position shoulder belt across the chest and shoulder, not face or neck. In order to attain the correct seating position for children weighing over 41 lb (18 kg), it may be necessary to use a booster seat until they reach a height where a normal lap/shoulder seat belt lies properly across their bodies without the need for a booster seat. Install the child restraint system according to the manufacturer's instructions. The child restraint system must be installed firmly on both brackets. An incorrectly installed child restraint system can come loose in the event of an accident, causing the child to be severely or fatally injured. Child restraint systems/child restraint retaining brackets that are damaged or have suffered damage due to an impact must be replaced. LATCH-type (ISOFIX) is a standardized securing system for specially designed child restraint systems on the rear seats. Securing rings for two LATCH-type (ISOFIX) child restraint systems are installed on the left and right of the rear seats. Secure non LATCH-type (ISOFIX) child restraint systems using the vehicle's seat belt system. Always install child restraint systems according to the manufacturer's instructions. ! When installing the child restraint system, make sure that the seat belt for the center seat does not get trapped. Otherwise, the seat belt could be damaged. Never release the seat belt buckle while the vehicle is in motion, since the special seat belt retractor will be deactivated. Z Safety Unsecured or improperly positioned cargo increases a child's risk of injury in the event of 55 Children in the vehicle 56 Safety seat backrest could fold forward. The child restraint system is no longer supported properly or held in position and can no longer fulfill its function. This could cause serious or even fatal injuries. Vehicles without rear-seat through-loading facility Installation instructions : indicate the installation location of securing rings =. X Top Tether provides an additional connection between the child restraint system secured with ISOFIX and the rear seat. It helps reduce the risk of injury even further. The Top Tether anchorage points are located in the rear compartment behind the head restraints. Remove covers ; from securing rings = by pulling in the direction of the arrow. Vehicles with rear-seat through-loading facility X Install the LATCH-type (ISOFIX) child restraint system. Comply with the manufacturer's instructions when installing the LATCH-type (ISOFIX) child restraint system. Top Tether G WARNING Always lock the rear seat backrests in their upright position when the rear seats are occupied by passengers. Lock the rear seat backrests in their upright position before installing the Top Tether straps or when the cargo compartment is not in use. Make sure that rear seat backrests are secured properly by pushing and pulling on the seat backrests. If the seat backrest is not locked properly, the X Move head restraint : upwards. Fold up cover ; of Top Tether anchorage =. X Route Top Tether belt A under head restraint : between the two head restraint bars. X Hook Top Tether hook ? into Top Tether anchorage =. X Make sure that Top Tether belt A is not twisted. X Children in the vehicle Fold down cover ; of Top Tether anchorage =. X Move head restraint : back down again slightly if necessary (Y page 96). Make sure that you do not interfere with the correct routing of Top Tether belt A. X Install the LATCH-type (ISOFIX) child restraint system with Top Tether. Comply with the manufacturer's installation instructions when doing so. Make sure that Top Tether belt A is tight. Child-proof locks Child-proof locks for the rear doors G WARNING Children could open a rear door from inside the vehicle. This could result in serious injuries or an accident. Therefore, when children ride in the rear always secure the rear doors with the child-proof locks. You secure each door individually with the child-proof locks on the rear doors. A door secured with a child-proof lock cannot be opened from inside the vehicle. When the vehicle is unlocked, the door can be opened from the outside. Important safety notes G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. The children could: Rinjure themselves on parts of the vehicle seriously or fatally injured through excessive exposure to extreme heat or cold Rinjure themselves or cause an accident with vehicle equipment that can be operated even if the SmartKey is removed from the ignition lock or removed from the vehicle, such as seat adjustment, steering wheel adjustment, or the memory function If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and the child could be burned on these parts. Rbe X To activate: press the child-proof lock lever up in the direction of arrow :. X Make sure that the child-proof locks are working properly. X To deactivate: press the child-proof lock lever down in the direction of arrow ;. Override feature for the rear side windows G WARNING When children ride on the vehicle's rear seats, activate the override switch. Otherwise, the children could be injured, e.g. by trapping themselves in the rear side window. Z Safety X 57 Driving safety systems 58 Safety i USA only: X To activate/deactivate: press button ;. If indicator lamp : is lit, operation of the rear side windows is deactivated. Operation is only possible using the switches in the driver's door. If indicator lamp : is off, operation is possible using the switches in the rear compartment. Panic alarm X To activate: press ! button : for at least one second. An alarm sounds and the exterior lighting flashes. X To deactivate: press ! button : again. or X Insert the SmartKey into the ignition lock. or X Press the KEYLESS-GO Start/Stop button. The KEYLESS-GO key must be in the vehicle. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. The product label with FCC ID and IC certification number can be found in the battery case of the SmartKey. i Canada only: This device complies with RSS-Gen of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. The product label with FCC ID and IC certification number can be found in the battery case of the SmartKey. Driving safety systems Driving safety systems overview In this section, you will find information about the following driving safety systems: RABS (Anti-lock Braking System) RBAS (Brake Assist System) RBAS PLUS (Brake Assist System Plus*) RESP® (Electronic Stability Program) REBD (Electronic Brake force Distribution) RADAPTIVE BRAKE RPRE-SAFE® Brake Important safety notes If you fail to adapt your driving style, the driving safety systems can neither reduce the risk of accident nor override the laws of physics. Driving safety systems are merely aids designed to assist driving. You are responsible for the distance to the vehicle in front, for vehicle speed and for braking in good time. Always adapt your driving style to suit the prevailing road/weather conditions, as well as the traffic conditions and maintain a safe distance to the vehicle in front. Drive carefully. i Please note that the driving safety systems described only work as effectively as possible when there is adequate contact between the tires and the road surface. Pay particular attention to the information regarding tires, recommended minimum tire tread depths etc. in the "Wheels and tires" section (Y page 310). In wintry driving conditions, always use winter tires (M+S tires) and if necessary, snow chains. Only in this way will the driving safety systems described in this section work as effectively as possible. ABS (Anti-lock Braking System) may come on as well as messages in the multifunction display that may appear. If the ABS malfunctions, the wheels may lock during hard braking, reducing the steering capability and extending the braking distance. The ! warning lamp in the instrument cluster lights up when the ignition is switched on. It goes out when the engine is running. Braking If ABS intervenes when braking, you will feel a pulsing in the brake pedal. X If ABS intervenes: continue to depress the brake pedal with force until the braking situation is over. X To make a full brake application: depress the brake pedal with full force. The pulsating brake pedal can be an indication of hazardous road conditions, and functions as a reminder to take extra care while driving. G WARNING Do not pump the brake pedal. Use firm, steady brake pedal pressure instead. Pumping the brake pedal defeats the purpose of the ABS and significantly reduces braking effectiveness. Important safety notes i Observe the "Important safety notes" section (Y page 59). ABS regulates brake pressure in such a way that the wheels do not lock when you brake. This allows you to continue steering the vehicle when braking. ABS works from a speed of about 5 mph (8 km/h) upwards, regardless of road-surface conditions. ABS works on slippery surfaces, even when you only brake gently. G WARNING If the ABS malfunctions, other driving systems such as the BAS or the ESP® are also switched off. Observe indicator and warning lamps that BAS (Brake Assist System) i Observe the "Important safety notes" section (Y page 59). BAS operates in emergency braking situations. If you depress the brake pedal quickly, BAS automatically boosts the braking force, thus shortening the stopping distance. X Keep the brake pedal firmly depressed until the emergency braking situation is over. ABS prevents the wheels from locking. The brakes will function as usual once you release the brake pedal. BAS is deactivated. Z 59 Safety Driving safety systems 60 Driving safety systems Safety G WARNING If the BAS malfunctions, the brake system still functions, but without the additional brake boost available that the BAS would normally provide in an emergency braking maneuver. Therefore, the braking distance may increase. BAS PLUS (Brake Assist System Plus) BAS PLUS is only available in vehicles equipped with DISTRONIC PLUS. i Observe the "Important safety notes" section (Y page 59). At speeds above approximately 20 mph (30 km/h), BAS PLUS assists you when braking in hazardous situations and uses the radar sensor system to evaluate the traffic conditions. i This device has been approved by the FCC as a "Vehicular Radar System". The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user's authority to operate the equipment. With the help of the radar sensor system, BAS PLUS can detect obstacles that are in the path of your vehicle for an extended period of time. At speeds up to approximately 40 mph (70 km/h), BAS PLUS can also detect stationary obstacles, for example stopped or parked vehicles. Should you approach an obstacle and BAS PLUS has detected a risk of collision, BAS PLUS calculates the braking force necessary to avoid a rear-end collision. Should you apply the brakes forcefully, BAS PLUS can automatically increase the braking force to a level suitable for the traffic conditions. X Keep the brake pedal depressed until the emergency braking situation is over. ABS prevents the wheels from locking. The brakes will work normally again if: Ryou release the brake pedal. is no longer any danger of a rear-end collision. Rno obstacle is detected in front of your vehicle. BAS PLUS is then deactivated. For BAS PLUS to assist you when driving, the radar sensor system must be switched on and operational, see "Radar sensor system" in the index. Rthere G WARNING BAS PLUS cannot always clearly identify objects and complex traffic situations. BAS PLUS cannot intervene in these cases. There is a risk of an accident. Always pay careful attention to the traffic situation and be ready to brake. In particular, the detection of obstacles can be impaired if there is: Rdirt on the sensors or anything else covering the sensors Rsnow or heavy rain Rinterference by other radar sources Rthe possibility of strong radar reflections, for example in parking garages Ra narrow vehicle traveling in front, e.g. a motorbike Ra vehicle traveling in front on a different line G WARNING BAS PLUS does not react: Rto people or animals oncoming vehicles Rto crossing traffic Rin curves As a result, BAS PLUS cannot intervene in critical situations. There is a risk of an Rto Driving safety systems Following damage to the front end of the vehicle, have the configuration and operation of the radar sensors checked at a qualified specialist workshop. This also applies to collisions at low speeds where there is no visible damage to the front of the vehicle. If BAS PLUS is not available due to a malfunction in the radar sensor system, the brake system remains available with full brake boosting effect and BAS. ESP® (Electronic Stability Program) Important safety notes i See the "Important safety notes" section (Y page 59). If ESP® detects that the vehicle is deviating from the direction desired by the driver, one or more wheels are braked to stabilize the vehicle. If necessary, the engine output is also modified to keep the vehicle on the desired course within physical limits. ESP® assists the driver when pulling away on wet or slippery roads. ESP® can also stabilize the vehicle during braking. If ESP® intervenes, the ÷ ESP® warning lamp flashes in the instrument cluster. G WARNING Under no circumstances should you deactivate ESP® when the ÷ ESP® warning lamp in the instrument cluster flashes. Proceed as follows: Rwhen driving off, apply as little throttle as possible. Rwhile driving, ease up on the accelerator pedal. Radapt your speed to suit the prevailing road and weather conditions. Failure to observe these guidelines could cause the vehicle to skid. ESP® cannot prevent accidents resulting from excessive speed. ! Vehicles without 4MATIC: switch the ignition off when: Rthe parking brake is being tested using a dynamometer vehicle is being towed with the front axle raised Application of the brakes by ESP® may otherwise destroy the brake system. Rthe ! Vehicles with 4MATIC: switch off the ignition when the parking brake is being tested on a brake dynamometer. Application of the brakes by ESP® may otherwise destroy the brake system. ! Vehicles with 4MATIC: function or performance tests may only be carried out on a 2-axle dynamometer. If you wish to operate the vehicle on such a dynamometer, please consult an authorized Mercedes-Benz Center in advance. You could otherwise damage the drive train or the brake system. i Only use wheels with the recommended tire sizes. Only then will ESP® function properly. ETS/4ETS (Electronic Traction System) G WARNING Observe "Important safety notes" (Y page 58). Traction control is part of ESP®. Traction control brakes the drive wheels individually if they spin. This enables you to pull away and accelerate on slippery surfaces, for example if the road surface is slippery on one side. On vehicles with 4MATIC, more drive torque is also transferred to the wheel or wheels with traction. Traction control remains active if you deactivate ESP®. Z Safety accident. Always pay careful attention to the traffic situation and be ready to brake. 61 62 Driving safety systems Deactivating/activating ESP® (except AMG vehicles) Safety G WARNING ESP® should not be deactivated during normal driving other than in the circumstances described below. Disabling the system will reduce vehicle stability in driving maneuvers. Do not deactivate ESP® when the emergency or spare wheel is mounted. ESP® is activated automatically when the engine is started. It may be best to deactivate ESP® in the following situations: Rwhen using snow chains deep snow Ron sand or gravel Rin G WARNING Switch on ESP® immediately if one of the previously stated conditions is no longer met. Otherwise, ESP® cannot stabilize the vehicle if it begins to lurch or when a wheel spins. If you deactivate ESP®: RESP® no longer improves driving stability. Rthe engine's torque is no longer limited and the drive wheels can spin. The spinning of the wheels results in a cutting action, which provides better grip. Rtraction control is still activated. RESP® still provides support when you brake. If ESP® is deactivated and one or more wheels start to spin, the ÷ ESP® warning lamp in the instrument cluster flashes. In such situations, ESP® will not stabilize the vehicle. X To deactivate:(Y page 204). The å ESP® OFF warning lamp in the instrument cluster lights up. G WARNING When the å ESP® OFF warning lamp is lit, ESP® is deactivated. If the ÷ ESP® warning lamp and the å ESP® OFF warning lamp remain lit, ESP® is not available due to a malfunction. When ESP® is deactivated or not operational, vehicle stability in standard driving maneuvers is reduced. Adapt your speed and driving to the prevailing road conditions and to the non-operating status of the ESP®. ! Avoid spinning the driven wheels for an extended period with ESP® deactivated. You could otherwise damage the drivetrain. X To activate:(Y page 204). The å ESP® OFF warning lamp in the instrument cluster goes out. Deactivating/activating ESP® (AMG vehicles) Activating/deactivating SPORT handling mode G WARNING The SPORT handling mode should not be switched on during normal driving. Switching on the SPORT handling mode will result in the following: Rno restriction to the engine torque supported traction control is limited The SPORT handling mode is designed for driving on closed tracks when the vehicle's own natural oversteer and understeer characteristics are desired and requires a highly skilled and experienced driver able to handle these critical driving situations. You could lose control of your vehicle and cause an accident. Please be aware of these limits when you switch on the SPORT handling mode. Rsystem Do not switch on the SPORT handling when a spare wheel is mounted. ESP® is activated automatically when the engine is started. It may be best to activate SPORT handling mode in the following situations: Rwhen using snow chains deep snow Ron sand or gravel Rin G WARNING Switch off the SPORT handling mode and switch on the ESP® immediately if the aforementioned circumstances do not apply anymore. Otherwise the SPORT handling mode will only stabilize the vehicle to a limited extent when it is starting to skid or a wheel is spinning. When SPORT handling mode is activated: RESP® only improves driving stability to a limited degree. Rthe engine's torque is restricted only to a limited degree and the drive wheels can spin. The spinning of the wheels results in a cutting action, which provides better grip. Rtraction control is still activated. RESP® still provides support when you brake firmly. If SPORT handling mode is activated and one or more wheels start to spin, the ÷ ESP® warning lamp in the instrument cluster flashes. ESP® only stabilizes the vehicle to a limited degree. X To activate: briefly press button :. The M SPORT handling mode warning lamp in the instrument cluster lights up. The SPORT handling mode message appears in the multifunction display. X To deactivate: briefly press button :. The M SPORT handling mode warning lamp in the instrument cluster goes out. Activating/deactivating ESP® G WARNING The ESP® should not be switched off during normal driving. Disabling of the system will result in the following: Rno restriction to engine torque of system-supported traction control Rloss "ESP® OFF" is designed for driving on closed tracks when the vehicle's natural oversteer and understeer characteristics are desired and requires a highly skilled and experienced driver able to handle these critical driving situations. You could lose control of your vehicle and cause an accident. Please be aware of these limits when you switch off the ESP®. Do not switch off the ESP® when a spare wheel is mounted. ESP® is activated automatically when the engine is started. It may be best to deactivate ESP® in the following situations: Rwhen using snow chains deep snow Ron sand or gravel Rin G WARNING Switch on ESP® immediately if one of the previously stated conditions is no longer met. Otherwise, ESP® cannot stabilize the vehicle if it begins to lurch or when a wheel spins. Z 63 Safety Driving safety systems Driving safety systems 64 If you deactivate ESP®: RESP® no longer improves driving stability. Safety Rthe engine's torque is no longer limited and the drive wheels are able to spin. The spinning of the wheels results in a cutting action, which provides better grip. Rtraction control is still activated. RPRE-SAFE® Brake is no longer available, nor is it activated if you brake firmly and ESP® intervenes. RESP® still provides support when you brake firmly. If ESP® is deactivated and one or more wheels start to spin, the ÷ ESP® warning lamp in the instrument cluster does not flash. In such situations, ESP® will not stabilize the vehicle. Adapt your speed and driving to the prevailing road conditions and to the non-operating status of the ESP®. ! Avoid spinning the driven wheels for an extended period with ESP® deactivated. You could otherwise damage the drivetrain. X To activate: briefly press button :. The å ESP® OFF warning lamp in the instrument cluster goes out. The ÷ON message appears in the multifunction display. EBD (electronic brake force distribution) i Observe the "Important safety notes" section (Y page 59). EBD monitors and controls the brake pressure on the rear wheels to improve driving stability while braking. G WARNING X To deactivate: press button : until the å ESP® OFF warning lamp lights up in the instrument cluster. The ÷OFF message appears in the multifunction display. G WARNING When the å ESP® OFF warning lamp is lit, ESP® is deactivated. If the ÷ ESP® warning lamp and the å ESP® OFF warning lamp remain lit, ESP® is not available due to a malfunction. When ESP® is deactivated or not operational, vehicle stability in standard driving maneuvers is reduced. If EBD has malfunctioned, the braking system remains available with full brake boosting effect. However, the rear wheels can still lock, e.g. under full braking. This could cause you to lose control of your vehicle and cause an accident. You should therefore adapt your driving style to the different handling characteristics. X Observe the notes on warning and indicator lamps (Y page 242) as well as display messages (Y page 216). ADAPTIVE BRAKE ADAPTIVE BRAKE enhances braking safety and offers increased braking comfort. In addition to the braking function, ADAPTIVE BRAKE also has the HOLD function (Y page 172) and hill start assist (Y page 140). For further information, see Driving tips (Y page 156). Driving safety systems i Observe the "Important safety notes" i USA only: this device has been approved section (Y page 59). PRE-SAFE® Brake can help you to minimize the risk of a frontal collision with a vehicle ahead or reduce the effects of such a collision. If PRE-SAFE® Brake has detected a risk of collision, you will be warned visually and acoustically as well as by automatic braking. PRE-SAFE® Brake cannot prevent a collision without your intervention. At speeds above approximately 20 mph (30 km/h), this function warns you when you are rapidly approaching the vehicle in front. An intermittent warning tone will then sound and the · distance warning lamp in the instrument cluster will light up. X Brake immediately in order to increase the distance from the vehicle in front. or X Take evasive action provided it is safe to do so. If the driver and front passenger have their seat belt fastened, PRE-SAFE® Brake can also brake the vehicle automatically at speeds from approximately 20 mph (30 km/h) to approximately 124 mph (200 km/h). Due to the nature of the system, particularly complicated driving conditions may cause unnecessary warnings or the unnecessary intervention of PRE-SAFE® Brake. To stop the braking action, you can either depress the accelerator pedal further, activate kickdown or release the brake pedal. The braking action of PRE-SAFE® Brake is ended automatically if: Ryour speed drops below approximately 9 mph (15 km/h). Ryou maneuver to avoid the obstacle. Rthere by the FCC as a "Vehicular Radar System". The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user's authority to operate the equipment. i Canada only: this device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Removal, tampering, or altering of the device will void any warranties, and is not permitted. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user's authority to operate the equipment. With the help of the radar sensor system, PRE-SAFE® Brake can detect obstacles that are in front of your vehicle for an extended period of time. At speeds up to approximately 40 mph (70 km/h), PRE-SAFE® Brake can also react to stationary obstacles, for example stopped or parked vehicles. If you approach an obstacle and PRE-SAFE® Brake detects a risk of collision, the system will initially alert you both visually and acoustically. If you do not brake or take evasive action, the system will warn you by automatically braking the vehicle gently. If the risk of collision remains and you do not Z Safety PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS. is no longer any danger of a rear-end collision. Rthere is no longer an obstacle detected in front of your vehicle. PRE-SAFE® Brake 65 Safety 66 Theft deterrent locking systems brake, take evasive action or accelerate significantly, the vehicle may perform automatic emergency braking. Automatic emergency braking is not performed until immediately prior to an accident that can no longer be avoided. G WARNING Even if PRE-SAFE® Brake slows the vehicle before an imminent rear-end collision, the system cannot avert a collision without the intervention of the driver. There is a risk of an accident. Brake according to the situation or take evasive action. Delayed intervention by the driver can lead to an accident. G WARNING PRE-SAFE® Brake cannot always detect complex traffic situations properly. In these cases, PRE-SAFE(R) Brake may: Rgive an unnecessary warning and then brake the vehicle Rneither give a warning nor intervene There is a risk of an accident. Always pay particular attention to the traffic situation and be ready to brake, especially if PRE-SAFE(R) Brake warns you. Terminate the intervention in a non-critical driving situation. In particular, the detection of obstacles can be impaired if there is: Rdirt on the sensors or anything else covering the sensors Rsnow or heavy rain Rinterference by other radar sources Rthe possibility of strong radar reflections, for example in parking garages Ra narrow vehicle traveling in front, e.g. a motorbike Ra vehicle traveling in front on a different line G WARNING PRE-SAFE® Brake does not react: Rto Rto people or animals oncoming vehicles Rto Rin crossing traffic curves As a result, PRE-SAFE® Brake cannot intervene in critical situations. There is a risk of an accident. Always pay careful attention to the traffic situation and be ready to brake. In order to maintain the appropriate distance to the vehicle in front and thus prevent a collision, you must apply the brakes yourself. X To activate/deactivate: activate or deactivate PRE-SAFE® Brake in the onboard computer (Y page 205). The Ä symbol appears in the multifunction display as long as the HOLD function is not activated (Y page 172). On vehicles with Parking Guidance, the Ä symbol is displayed when transmission position P is selected or if you drive faster than 22 mph (35 km/h). For PRE-SAFE® Brake to assist you when driving, the radar sensor system must be switched on (Y page 208) and operational. Following damage to the front end of the vehicle, have the configuration and operation of the radar sensors checked at a qualified specialist workshop. This also applies to collisions at low speeds where there is no visible damage to the front of the vehicle. Theft deterrent locking systems Immobilizer The immobilizer prevents your vehicle from being started without the correct SmartKey. When leaving the vehicle, always take the SmartKey with you and lock the vehicle. The engine can be started by anyone with a valid SmartKey that is left inside the vehicle. X To activate with the SmartKey: remove the SmartKey from the ignition lock. X To activate with KEYLESS-GO: switch the ignition off and open the driver's door. X To deactivate: switch on the ignition. Theft deterrent locking systems when you start the engine. In the event that the engine cannot be started when the starter battery is fully charged, the immobilizer may be faulty. Contact an authorized Mercedes-Benz Center or call 1-800-FOR-MERCedes (in USA) or 1-800-387-0100 (in Canada). ATA (Anti-Theft Alarm system) A visual and audible alarm is triggered if the alarm system is armed and you open: door vehicle with the mechanical key Rthe trunk lid Rthe hood The alarm is not switched off, even if you close the open door that has triggered it, for example. X To arm: lock the vehicle with the SmartKey or KEYLESS-GO. Indicator lamp : flashes. The alarm system is armed after approximately 15 seconds. X To deactivate: unlock the vehicle with the SmartKey or KEYLESS-GO. X or X Press the % or & button on the SmartKey. The alarm is switched off. X To stop the alarm using KEYLESS-GO: grasp the outside door handle. The SmartKey must be outside the vehicle. The alarm is switched off. Ra Rthe i If the alarm stays on for more than 30 seconds, the emergency call system mbrace (USA only) or TELE AID (Canada only) initiates a call to the Customer Assistance Center automatically. The emergency call system initiates the call provided that: To stop the alarm using the SmartKey: insert the SmartKey into the ignition lock. The alarm is switched off. or X Press the Start/Stop button on the dashboard. The SmartKey must be inside the vehicle. The alarm is switched off. Ryou have subscribed to the mbrace/ TELE AID service. Rthe mbrace/TELE AID service has been activated properly. Rthe required mobile phone, power supply and GPS are available. Z Safety i The immobilizer is always deactivated 67 68 69 70 70 77 80 83 86 Opening/closing Useful information .............................. SmartKey ............................................. Doors .................................................... Trunk .................................................... Side windows ...................................... Sliding sunroof .................................... 70 SmartKey Useful information Opening/closing i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified hot, and a child could be burned on these parts. G WARNING If a key ring is too heavy or too large, the weight acting on the SmartKey could cause it to turn in the ignition lock or catch on the steering wheel. This could cause the engine to be switched off suddenly. You could lose control of the vehicle and cause an accident. Do not attach any heavy or large key rings to the SmartKey that is inserted in the ignition. specialist workshops (Y page 24). General notes SmartKey Important safety notes G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unsupervised in the vehicle, even if they are secured in a child restraint system, and do not give them access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. They could: Rinjure themselves on vehicle parts seriously or fatally injured by extreme heat or cold Rinjure themselves or have an accident with vehicle equipment that may still be in operation even after the SmartKey has been removed from the ignition, such as the seat adjustment, steering wheel adjustment or memory function. If children open a door, they could cause severe or even fatal injury to other persons; if they get out of the vehicle, they could injure themselves when doing so or be seriously or even fatally injured by any passing traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very Rbe If you cannot lock or unlock the vehicle with the SmartKey, either the battery in the SmartKey is discharged, the SmartKey is faulty or the starter battery is discharged. X Check the battery in the SmartKey and replace it if necessary (Y page 74). X Unlock the driver's door using the mechanical key (Y page 79). X Lock the vehicle using the mechanical key (Y page 79). X Have the starter battery and the battery contacts checked at a qualified specialist workshop. If the SmartKey is faulty, contact Roadside Assistance or a qualified specialist workshop. SmartKey functions General notes i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. SmartKey i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Any unauthorized modification to this device could void the user’s authority to operate the equipment. The Product label with FCC ID and IC certification number can be found in the battery case of the SmartKey. Locking and unlocking centrally When it is dark, the surround lighting also comes on if it is activated in the on-board computer (Y page 207). If you activate the acoustic locking confirmation function, you will hear the following, depending on the date of production of the vehicle: Ran acoustic signal when locking or Rone acoustic signal when unlocking and three when locking. The audible signal can be activated and deactivated using the on-board computer (Y page 208). X To unlock centrally: press the % button. If you do not open the vehicle within approximately 40 seconds of unlocking: Rthe vehicle is locked again. Rthe theft deterrent locking system is armed again. X To lock centrally: press the & button. The SmartKey centrally locks/unlocks: Rthe doors trunk lid Rthe fuel filler flap Rthe KEYLESS-GO General notes i USA only: : & Locks the vehicle ; F Unlocks the trunk lid = % Unlocks the vehicle When unlocking, the turn signals flash once. When locking, they flash three times. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user’s authority to operate the equipment. The Product label with FCC ID and IC certification number can be found in the battery case of the SmartKey. i Canada only: Z Opening/closing Any unauthorized modification to this device could void the user’s authority to operate the equipment. The Product label with FCC ID and IC certification number can be found in the battery case of the SmartKey. 71 Opening/closing 72 SmartKey This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user’s authority to operate the equipment. The Product label with FCC ID and IC certification number can be found in the battery case of the SmartKey. Important notes on the use of KEYLESSGO RThe KEYLESS-GO key can be used like a conventional key. RYou can combine KEYLESS-GO functions with those of a conventional key, e.g. unlock with KEYLESS-GO and lock with the & button. RAlways carry your KEYLESS-GO key on your person. RDo not keep the KEYLESS-GO key together with: - electronic devices, e.g. a mobile phone or another key - metallic objects, e.g. coins or metal foil. This can affect the functionality of KEYLESS-GO. RWhen locking and unlocking using KEYLESS-GO, the distance between the SmartKey and the corresponding door handle must not exceed 3 ft (1 m). RIf the KEYLESS-GO key is removed from the vehicle, it is possible that the system may not recognize the SmartKey. The vehicle can then not be locked or started using KEYLESS-GO. RIf the KEYLESS-GO key has been removed from the vehicle, e.g. if a passenger leaves the vehicle with a KEYLESS-GO key: - if the start/stop button is pressed or if an attempt is made to lock the vehicle with the locking button on the outer door handle, the Key Not Detected message appears in the multifunction display - when the engine is running, the red Key Not Detected message appears in the multifunction display as you pull away. Find the KEYLESS-GO key and change its position in the vehicle. Carry the KEYLESS-GO key in your shirt pocket, for example. RIf you have started the engine with the Start/Stop button, you can switch it off again by: - pressing the Start/Stop button again - inserting the KEYLESS-GO key into the ignition lock if the vehicle is stationary and the automatic transmission is in park position P. RYou could unlock the vehicle by mistake if the distance between the KEYLESS-GO key and the vehicle is less than 3 ft (1 m) and: - an exterior door handle is hit by a water jet or - you clean an exterior door handle. RBear in mind that the engine can be started by any of the vehicle occupants if there is a KEYLESS-GO key in the vehicle. SmartKey To unlock the vehicle: touch the inner surface of the door handle. X To lock the vehicle: touch sensor surface :. X Convenience closing feature: touch recessed sensor surface ; for an extended period (Y page 85). If you pull on the handle of the trunk lid, only the trunk of the vehicle is unlocked. Changing the settings of the locking system You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own. X To change the setting: press and hold down the % and & buttons simultaneously for approximately six seconds until the battery check lamp (Y page 74) flashes twice. i If the setting of the locking system is changed within the signal range of the vehicle, pressing the & or % button locks or unlocks the vehicle. The SmartKey now functions as follows: X To unlock the driver's door: press the % button once. X To unlock centrally: press the % button twice. X To lock centrally: press the & button. The KEYLESS-GO function is changed as follows: X To unlock the driver's door: touch the inner surface of the door handle on the driver's door. X To unlock centrally: touch the inner surface of the door handle on the frontpassenger door or the rear door. X To lock centrally: touch the outer sensor surface on one of the door handles. Restoring the factory settings X Press the % and & buttons simultaneously for approximately six seconds until the battery check lamp flashes twice. Mechanical key General notes If the vehicle can no longer be locked or unlocked with the SmartKey, use the mechanical key. If you use the mechanical key to unlock and open the driver's door or the trunk lid, the anti-theft alarm system will be triggered (Y page 67). There are several ways to turn off the alarm: X To turn the alarm off with the SmartKey: press the % or & button on the SmartKey. or X Insert the SmartKey into the ignition lock. or X To deactivate the alarm with KEYLESSGO: press the Start/Stop button in the ignition lock. The SmartKey must be in the vehicle. or X Lock or unlock the vehicle using KEYLESSGO. The SmartKey must be outside the vehicle. If you unlock the vehicle using the mechanical key, the fuel filler flap will not be unlocked automatically. X To unlock the fuel filler flap: insert the SmartKey in the ignition lock. Z Opening/closing X 73 SmartKey Opening/closing 74 Removing the mechanical key Checking the battery X X Push release catch : in the direction of the arrow and at the same time, remove mechanical key ; from the SmartKey. SmartKey battery Important safety notes Have the batteries changed at a qualified specialist workshop. G WARNING Batteries contain toxic substances. Swallowing batteries can lead to serious health issues or death. Keep batteries out of the reach of children. Seek medical attention immediately if a battery is swallowed. G WARNING The SmartKey batteries contain perchlorate material, which may require special handling and regard for the environment. Observe government disposal guidelines. California residents, see www.dtsc.ca.gov/ HazardousWaste/Perchlorate/ index.cfm. Press the & or % button. The battery is working properly if battery check lamp : lights up briefly If battery check lamp : does not light up briefly during the test, the battery is discharged. X Changing the battery (Y page 74) i You can obtain the battery at a qualified specialist workshop. i If the SmartKey battery is checked within the signal reception range of the vehicle, pressing the & or % button locks or unlocks the vehicle. Changing the battery You require a CR 2025 3 V cell battery. X Take the mechanical key out of the SmartKey (Y page 73). X Press mechanical key ; into the opening in the SmartKey in the direction of the SmartKey 75 Opening/closing arrow until battery tray cover : opens. When doing so, do not hold cover : shut. X Remove battery tray cover :. X Repeatedly tap the SmartKey against your palm until battery = falls out. X Insert the new battery with the positive terminal facing upwards. Use a lint-free cloth to do so. X Make sure that the surface of the battery is free from lint, grease and all other forms of contamination. X Insert the front tabs of battery tray cover : and then press to close it. X Insert the mechanical key into the SmartKey. X Check the function of all SmartKey buttons on the vehicle. Z 76 SmartKey Problems with the SmartKey Possible causes/consequences and M Solutions You cannot lock or unlock the vehicle using the SmartKey. The SmartKey battery is discharged or nearly discharged. X Try again to lock/unlock the vehicle using the remote control function of the SmartKey. Point the tip of the SmartKey at the driver's door handle from close range and press the %/ & button. Opening/closing Problem If this does not work: X Check the SmartKey battery (Y page 74) and replace it if necessary (Y page 74). X Lock (Y page 79) or unlock (Y page 79) the vehicle using the mechanical key. The SmartKey is faulty. X Lock (Y page 79) or unlock (Y page 79) the vehicle using the mechanical key. X Have the SmartKey checked at a qualified specialist workshop. You can no longer lock There is interference from a powerful source of radio waves. or unlock the vehicle X Lock/unlock the vehicle using the remote control function of using KEYLESS-GO. the SmartKey. Point the tip of the SmartKey at the driver's door handle from close range and press the %/& button. There is a malfunction with KEYLESS-GO. X Lock/unlock the vehicle using the remote control function of the SmartKey. Point the tip of the SmartKey at the driver's door handle from close range and press the %/& button. X Have KEYLESS-GO checked at a qualified specialist workshop. If this does not work: X Check the SmartKey battery (Y page 74) and replace it if necessary (Y page 74). X Lock (Y page 79) or unlock (Y page 79) the vehicle using the mechanical key. You have lost a SmartKey. X You have lost the mechanical key. X Have the SmartKey deactivated at a qualified specialist workshop. X Report the loss immediately to the vehicle insurers. X If necessary, have the locks changed as well. Report the loss immediately to the vehicle insurers. X If necessary, have the locks changed as well. Problem Possible causes/consequences and M Solutions The engine cannot be started using the SmartKey. The on-board voltage is too low. X Switch off non-essential consumers, e.g. seat heating or interior lighting, and try to start the engine again. If this does not work: X Check the starter battery and charge it if necessary (Y page 298). or X Jump-start the vehicle (Y page 301). or X Consult a qualified specialist workshop. The engine cannot be started using the SmartKey. The steering lock is mechanically blocked. X Remove the SmartKey and reinsert it into the ignition lock. While doing this, turn the steering wheel in both directions. The engine cannot be A door is open. Therefore, the SmartKey cannot be detected as started using KEYLESS- easily. GO. The SmartKey is in X Close the door and try to start the vehicle again. the vehicle. There is interference from a powerful source of radio waves. X Start your vehicle with the SmartKey in the ignition lock. Doors Important safety notes G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unsupervised in the vehicle, even if they are secured in a child restraint system, and do not give them access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. They could: Rinjure themselves on vehicle parts seriously or fatally injured by extreme heat or cold Rinjure themselves or have an accident with vehicle equipment that may still be in operation even after the SmartKey has Rbe been removed from the ignition, such as the seat adjustment, steering wheel adjustment or memory function. If children open a door, they could cause severe or even fatal injury to other persons; if they get out of the vehicle, they could injure themselves when doing so or be seriously or even fatally injured by any passing traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and a child could be burned on these parts. G WARNING Do not carry heavy or hard objects in the passenger compartment or trunk unless they are firmly secured in place. Z 77 Opening/closing Doors Doors 78 Unsecured or improperly positioned cargo increases a child's risk of injury in the event of i You cannot unlock the vehicle centrally from the inside if the vehicle has been locked with the SmartKey or KEYLESS-GO. Rstrong Opening/closing braking maneuvers Rsudden changes of direction Ran accident The central locking/unlocking button does not lock or unlock the fuel filler flap. i It is only possible to lock the vehicle centrally if the front-passenger door is closed. Unlocking and opening doors from inside You can open a door from inside the vehicle even if it has been locked. You can only open the rear doors from inside the vehicle if they are not secured by the child-proof locks (Y page 57). Only open the door when the traffic situation permits. If the vehicle was previously locked with the SmartKey or with KEYLESS-GO, opening the vehicle from the inside will activate the antitheft alarm system. Switch off the alarm (Y page 67). X To unlock: press button :. X To lock: press button ;. If the front-passenger door is closed, the vehicle locks. You can open a front door from inside the vehicle even if it has been locked. Only open the door when the traffic situation permits. If the vehicle has been locked with the central locking button: Rand X Pull door handle ;. If the door is locked, locking knob : pops up. The door is unlocked and can be opened. Centrally locking and unlocking the vehicle from the inside You can centrally lock or unlock the vehicle from the inside. the SmartKey is set to its factory setting, the entire vehicle is unlocked if a front door is opened from the inside Rand the SmartKey is set to an individual setting, only the front door that is opened from inside the vehicle is unlocked. If the vehicle has been locked centrally with the SmartKey or with KEYLESS-GO, it is not unlocked when the release button for the central locking is used. Automatic locking feature The vehicle locks automatically when the ignition is switched on and the wheels of the Doors 79 vehicle are turning at a speed of more than 9 mph (15 km/h). You could therefore be locked out when: Rthe vehicle is being pushed. vehicle is being towed. Rthe vehicle is being tested on a dynamometer. X Turn the mechanical key counterclockwise to position 1. The door is unlocked. X Turn the mechanical key back and remove it. X Insert the mechanical key into the SmartKey. X To deactivate: press and hold button : for about five seconds until a tone sounds. X To activate: press and hold button ; for about five seconds until a tone sounds. i If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected. You can also switch the automatic locking function on and off using the on-board computer (Y page 208). Unlocking the driver's door (mechanical key) If the vehicle can no longer be unlocked with the SmartKey, use the mechanical key. If you use the mechanical key to unlock and open the driver's door, the anti-theft alarm system will be triggered (Y page 67). X Take the mechanical key out of the SmartKey (Y page 73). X Insert the mechanical key into the lock of the driver's door as far as it will go. Locking the vehicle (mechanical key) If the vehicle can no longer be locked with the SmartKey, use the mechanical key. X Open the driver's door. X Close the front-passenger door, the rear doors and the trunk lid. X Press the locking button (Y page 78). X Check whether the locking knobs on the front-passenger door and the rear doors are still visible. Press down the locking knobs by hand, if necessary. X Close the driver's door. X Take the mechanical key out of the SmartKey (Y page 73). X Insert the mechanical key into the lock of the driver's door as far as it will go. Z Opening/closing Rthe Trunk Opening/closing 80 X Turn the mechanical key clockwise as far as it will go to position 1. X Turn the mechanical key back and remove it. X Make sure that the doors and the trunk lid are locked. X Insert the mechanical key into the SmartKey. i If you lock the vehicle as described above, the fuel filler flap is not locked. The antitheft alarm system is not armed. been removed from the ignition, such as the seat adjustment, steering wheel adjustment or memory function. If children open a door, they could cause severe or even fatal injury to other persons; if they get out of the vehicle, they could injure themselves when doing so or be seriously or even fatally injured by any passing traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and a child could be burned on these parts. G WARNING Do not carry heavy or hard objects in the passenger compartment or trunk unless they are firmly secured in place. Unsecured or improperly positioned cargo increases a child's risk of injury in the event of Rstrong braking maneuvers changes of direction Ran accident Rsudden Trunk Important safety notes Do not leave the SmartKey in the trunk. You could otherwise lock yourself out. G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unsupervised in the vehicle, even if they are secured in a child restraint system, and do not give them access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. They could: themselves on vehicle parts seriously or fatally injured by extreme heat or cold Rinjure themselves or have an accident with vehicle equipment that may still be in operation even after the SmartKey has G WARNING Make sure the trunk lid is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter the vehicle interior resulting in unconsciousness and death. ! The trunk lid swings upwards when opened. Therefore, make sure that there is sufficient clearance above the trunk lid. To open the trunk lid completely, a minimum clearance of 5.90 ft (1.80 m) above the ground is necessary. The trunk lid can be: Rinjure Ropened Rbe Ropened and closed manually from outside automatically from outside Ropened automatically from inside Rlocked separately Trunk Runlocked with the mechanical key Ropened with the emergency release button Opening and closing manually 81 (Y page 70) or with KEYLESS-GO (Y page 71). i If a KEYLESS-GO key is detected in the trunk, the trunk lid cannot be locked and then opens again. X Press the % button on the SmartKey. Opening automatically from outside Important safety notes G WARNING Make sure the trunk lid is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter the vehicle interior resulting in unconsciousness and death. ! The trunk lid swings upwards when X Pull handle :. X Raise the trunk lid. Closing G WARNING To prevent possible personal injury, always keep hands and fingers away from the trunk opening when closing the trunk lid. Be especially careful when small children are around. opened. Therefore, make sure that there is sufficient clearance above the trunk lid. To open the trunk lid completely, a minimum clearance of 5.90 ft (1.80 m) above the ground is necessary. Opening You can open the trunk lid automatically using the SmartKey or the handle in the trunk lid. X Press and hold the F button on the SmartKey until the trunk lid opens. or X When the trunk is unlocked, pull the trunk lid handle and let it go again immediately. Closing Opening automatically from the inside X Pull the trunk lid down using recess :. X If necessary, lock the vehicle with the & button on the SmartKey G WARNING Make sure the trunk lid is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) Z Opening/closing Opening Trunk 82 gases may enter the vehicle interior resulting in unconsciousness and death. You can open the trunk lid from the driver's seat when the vehicle is stationary and unlocked. X Remove the mechanical key. X Insert the mechanical key into the SmartKey. Unlocking the trunk (mechanical key) Opening/closing ! The trunk lid swings upwards when opened. Therefore, make sure that there is sufficient clearance above the trunk lid. X To open: press the upper section of remote operating switch for trunk lid : until the trunk lid opens. If the trunk cannot be unlocked with the SmartKey or KEYLESS-GO, use the mechanical key. If you use the mechanical key to unlock and open the trunk lid, the anti-theft alarm system will be triggered (Y page 67). X Take the mechanical key out of the SmartKey (Y page 73). X Insert the mechanical key into the trunk lid lock as far as the stop. Locking the trunk separately You can lock the trunk separately. If you then unlock the vehicle centrally, the trunk remains locked and cannot be opened. X Close the trunk lid. X Take the mechanical key out of the SmartKey (Y page 73). X Turn the mechanical key counter-clockwise from position 1 as far as it will go to position 2. The trunk is unlocked. X Turn the mechanical key back to position 1 and remove it. X Insert the mechanical key into the SmartKey. X Insert the mechanical key into the trunk lid lock as far as the stop. X Turn the mechanical key clockwise from position 1 to position 2. Trunk emergency release You can open the trunk lid from inside the vehicle with the emergency release button. X Briefly press emergency release button :. The trunk lid unlocks and opens. The trunk lid can be unlocked and opened with the trunk lid emergency release when the vehicle is stationary or while driving. Trunk lid emergency release light: Remergency release button : flashes for 30 minutes after the trunk lid is opened. Remergency release button : flashes for 60 minutes after the trunk lid is closed. The trunk lid emergency release does not open the trunk lid if the battery is disconnected or discharged. The closing of the door windows can be immediately halted by releasing the switch or, if the switch was pulled past the resistance point and released, by either pressing or pulling the respective switch. If a door window encounters an obstruction that blocks its path in a circumstance where you are closing the windows by pressing and holding the & button on the SmartKey or by pressing and holding the lock button (vehicles with KEYLESS-GO) on an outside door handle, the anti-entrapment feature will not operate. Activate the override switch when children are riding in the back seats of the vehicle. The children may otherwise injure themselves, e.g. by becoming trapped in the door window opening. G WARNING Do not keep any part of your body up against the window pane when opening a window. The downward motion of the pane may pull that part of your body down between the window pane and the door frame and trap it there. If there is a risk of entrapment, release the switch and pull it to close the window. Side windows Important safety notes G WARNING When opening or closing the door windows, make sure that there is no danger of anyone being harmed by the opening/closing procedure. The door windows are equipped with automatic operation and the anti-entrapment feature. If in automatic mode a door window encounters an obstruction that blocks its path, the anti-entrapment feature will stop the door window and open it slightly. The door windows operate differently when the switch is pulled. See the "Problems with door windows" section for details. Opening and closing the side windows : Front left ; Front right = Rear right ? Rear left Z 83 Opening/closing Side windows Side windows 84 The switches for all side windows are located on the driver's door. There is also a switch on each door for the corresponding side window. The switches on the driver's door take precedence. Opening/closing i The side windows cannot be operated from the rear when the override feature for the side windows is activated (Y page 57). X Turn the SmartKey to position 1 or 2 in the ignition lock. X To open: press the corresponding switch. X To close: pull the corresponding switch. i If you press the switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again. i You can continue to operate the side windows after you switch off the engine or remove the SmartKey. This function is available for up to five minutes or until the driver's or front-passenger door is opened. panorama roof with power tilt/sliding panel are in the desired position. If the roller sunblinds of the panorama roof with power tilt/sliding panel are closed, the roller sunblinds are opened first. X Press and hold the % button again until the panorama roof with power tilt/sliding panel is in the desired position. X To interrupt convenience opening: release the % button. Convenience closing General notes When you lock the vehicle, you can simultaneously: Rclose the side windows the sliding sunroof or the panorama roof with power tilt/sliding panel On vehicles with a panorama roof with power tilt/sliding panel, you can then close the roller sunblinds. Rclose G WARNING Runlock When closing the door windows and the sliding sunroof or panorama roof with power tilt/sliding panel, make sure that there is no danger of anyone being harmed by the closing procedure. If potential danger exists, proceed as follows: Ropen RRelease the & button to stop the closing Convenience opening feature You can ventilate the vehicle before you start driving. To do this, the key is used to carry out the following functions simultaneously: the vehicle the side windows Ropen the sliding sunroof or the panorama roof with power tilt/sliding panel and the roller sunblinds i The convenience opening feature can only be operated using the SmartKey. The SmartKey must be close to the driver's door handle. X Point the tip of the SmartKey at the driver's door handle. X Press and hold the % button until the side windows and the sliding sunroof or the procedure. To open, press and hold the % button. To continue the closing procedure after making sure that there is no danger of anyone being harmed by the closing procedure, press and hold the & button. Vehicles with KEYLESS-GO: RRelease the sensor surface on the outside door handle to stop the closing procedure. RImmediately pull on the same outside door handle and hold firmly. The door windows and the sliding sunroof or panorama roof Side windows Using the SmartKey sliding sunroof or the panorama roof with power tilt/sliding panel are fully closed. i Make sure you only touch recessed sensor surface :. X i The SmartKey must be close to the driver's door handle. X Point the tip of the SmartKey at the driver's door handle. X Press and hold the & button until the side windows and the sliding sunroof or the panorama roof with power tilt/sliding panel are fully closed. X Make sure that all the side windows and the sliding sunroof or panorama roof with power tilt/sliding panel are closed. On vehicles with a panorama roof with power tilt/sliding panel: X X Press and hold the & button again until the roller sunblinds of the panorama roof with power tilt/sliding panel close. To interrupt convenience closing: release the & button. Using KEYLESS-GO The KEYLESS-GO key must be outside the vehicle. All the doors must be closed. Make sure that all the side windows and the sliding sunroof or panorama roof with power tilt/sliding panel are closed. On vehicles with a panorama roof with power tilt/sliding panel: X Touch recessed sensor surface : on the door handle again until the roller sunblinds of the panorama roof with power tilt/ sliding panel close. X To interrupt convenience closing: release recessed sensor surface : on the door handle. Resetting the side windows You must reset each side window if a side window can no longer be closed fully. X Close all the doors. X Turn the SmartKey to position 1 or 2 in the ignition lock. X Pull the corresponding switch on the door control panel until the side window is completely closed. (Y page 83) X Hold the switch for an additional second. If the side window opens again slightly: X X Touch recessed sensor surface : on the door handle until the side windows and the Immediately pull the corresponding switch on the door control panel until the side window is completely closed (Y page 83). X Hold the switch for an additional second. X If the corresponding side window remains closed after the button has been released, the side window has been reset correctly. If this is not the case, repeat the steps above again. Z Opening/closing with power tilt/sliding panel will open for as long as the door handle is held but the door is not opened. 85 Sliding sunroof 86 Problems with the side windows Problem: a side window cannot be closed because it is blocked by objects, e.g. leaves in the window guide. X Opening/closing Remove the objects. X Close the side window. Problem: a side window cannot be closed and you cannot see the cause. G WARNING Closing the side windows with increased force or without the anti-entrapment feature could lead to serious or even fatal injury. Make sure that nobody can become trapped when closing the side windows. If a side window is obstructed during closing and reopens again slightly: X Immediately after the window blocks, pull the corresponding switch again until the side window has closed. The side window is closed with increased force. If a side window is obstructed again during closing and reopens again slightly: X Immediately after the window blocks, pull the corresponding switch again until the side window has closed. The side window is closed without the antientrapment feature. G WARNING Pulling and holding the switch to close the door window immediately after it had been blocked two times will cause the door window to close without the anti-entrapment feature for as long as you hold the switch. Sliding sunroof Important safety notes Your vehicle may be equipped with a sliding sunroof or a panorama roof with power tilt/ sliding panel. In the following section, the term "sliding sunroof" refers to both types of sliding sunroof. G WARNING When opening or closing the sliding sunroof, make sure that there is no danger of anyone being harmed by the opening/closing procedure. The sliding sunroof is equipped with automatic operation and the anti-entrapment feature. If the movement of the sliding sunroof is blocked during the closing procedure, the sliding sunroof will stop and open slightly. The sliding sunroof operates differently when the sliding sunroof switch is pressed and held. See the "Problems with the sliding sunroof" section for more details. The opening/closing procedure of the sliding sunroof can be immediately halted by releasing the sliding sunroof switch or, if the sliding sunroof switch was moved past the resistance point and released, by moving the sliding sunroof switch in any direction. G WARNING The sliding sunroof is made out of glass. In the event of an accident, the glass may shatter. This may result in an opening in the roof. In a vehicle rollover, occupants not wearing their seat belts or not wearing them properly may be thrown out of the opening. Such an opening also presents a potential for injury for occupants wearing their seat belts properly, as entire body parts or portions of them may protrude from the passenger compartment. ! Only open the sliding sunroof if it is free of snow and ice. Otherwise, malfunctions may occur. Do not allow anything to protrude from the sliding sunroof. Otherwise, the seals could be damaged. ! The weather can change abruptly. It could start to rain or snow. Make sure that the sliding sunroof is closed when you leave the vehicle. The vehicle electronics can be Sliding sunroof i Resonance noises can occur in addition to the usual airflow noises when the sliding sunroof is open. They are caused by minor pressure fluctuations in the vehicle interior. Change the position of the sliding sunroof or open a side window slightly to reduce or eliminate these noises. Operating the sliding sunroof Opening and closing i You can continue to operate the sliding sunroof after switching off the engine or removing the SmartKey from the ignition lock. This function is available for up to five minutes or until the driver's or frontpassenger door is opened. When opening and raising the roof, automatic operation is only available if the sliding sunroof is in the closed position. The sun protection cover automatically opens along with the sliding sunroof. You can open or close the sun protection cover manually when the sliding sunroof is raised or closed. Resetting Reset the sliding sunroof if it does not move smoothly. X Turn the SmartKey to position 2 in the ignition lock. X Raise the sliding sunroof fully at the rear (Y page 87). X Keep the 3 switch pressed for another second. X Make sure that the sliding sunroof can be fully opened and closed again (Y page 87). X If this is not the case, repeat the steps above again. ! If the sliding sunroof still cannot be opened or closed fully after resetting, contact a qualified specialist workshop. Operating the panorama roof with power tilt/sliding panel Overhead control panel : To raise Opening and closing ; To open = To close/lower X Turn the SmartKey to position 1 or 2 in the ignition lock. X Press or pull the 3 switch in the corresponding direction. i If you press the 3 switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again. Overhead control panel : To raise ; To open = To close/lower Z Opening/closing damaged if water enters the vehicle interior. 87 Opening/closing 88 Sliding sunroof The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open. X Turn the SmartKey to position 1 or 2 in the ignition lock. X Push or pull the 3 switch in the corresponding direction. i If you press the 3 switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again. When raising the roof, automatic operation is only available if the panorama roof with power tilt/sliding panel is in the closed position. Operating the sunblinds for the panorama roof with power tilt/sliding panel General notes The roller sunblinds shield the vehicle interior from sunlight. The two roller sunblinds can only be opened and closed together when the panorama roof with power tilt/sliding panel is closed. G WARNING When opening or closing the roller sunblinds, make sure that no one can be injured. The roller sunblinds have automatic operation and an anti-entrapment feature. If the roller sunblinds are blocked during the closing procedure, the anti-entrapment feature stops the roller sunblinds and they open again slightly. The opening and closing of the roller sunblinds can be terminated immediately by releasing the button. In automatic operation, press the button briefly in any direction to stop the roller sunblinds. Opening and closing Overhead control panel : To open ; To open = To close X Turn the SmartKey to position 1 or 2 in the ignition lock. X Press or pull the 3 switch in the corresponding direction. i If you press the 3 switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again. Resetting the panorama roof with power tilt/sliding panel and the roller sunblinds Reset the panorama roof with power tilt/ sliding panel and the roller sunblinds if the panorama roof with power tilt/sliding panel or the roller sunblinds do not move smoothly. X Turn the SmartKey to position 1 or 2 in the ignition lock. X Press the 3 switch to the point of resistance in the direction of arrow ; and hold it until the panorama roof with power tilt/sliding panel has opened about 4 in (10 cm). X Pull the 3 switch repeatedly to the point of resistance in the direction of arrow = Sliding sunroof ! If the panorama roof with power tilt/ sliding panel and the roller sunblind cannot be fully opened or closed after resetting, contact a qualified specialist workshop. Problems with the sliding sunroof Your vehicle may be equipped with a sliding sunroof or a panorama roof with power tilt/ sliding panel. In the following section, the term "sliding sunroof" refers to both types of sliding sunroof. Problem: the sunroof cannot be closed and you cannot see the cause. If the sliding sunroof is obstructed during closing and reopens again slightly: X Immediately after the sliding sunroof blocks, pull the 3 switch in the overhead control panel down to the point of resistance and hold it until the sliding sunroof is closed. The sliding sunroof is closed with increased force. If the sliding sunroof is obstructed again during closing and reopens again slightly: X Immediately after the sliding sunroof blocks, pull the 3 switch in the overhead control panel down to the point of resistance and hold it until the sliding sunroof is closed. The sliding sunroof is closed without the anti-entrapment feature. G WARNING Pressing and holding the sliding sunroof switch to close the sliding sunroof immediately after it had been blocked two times will cause the sliding sunroof to close without the anti-entrapment feature for as long as you hold the switch. ! If the sliding sunroof still cannot be opened or closed as a result of a malfunction, contact a qualified specialist workshop. G WARNING You could be severely or even fatally injured when closing the sliding sunroof with increased closing force or if the antientrapment feature is deactivated. Make sure that nobody can become trapped when closing the sliding sunroof. Z Opening/closing until the panorama roof with power tilt/ sliding panel is fully closed. X Keep the 3 switch pulled for an additional second. X Press the 3 switch to the point of resistance in the direction of arrow ; and hold it until the sunblinds have opened about 4 in (10 cm). X Pull the 3 switch repeatedly to the point of resistance in the direction of arrow = until the roller sunblinds are fully closed. X Keep the 3 switch pulled for an additional second. X Make sure that the panorama roof with power tilt/sliding panel and the roller sunblinds can be fully opened and closed again (Y page 87). X If this is not the case, repeat the steps above again. 89 90 91 Seats, steering wheel and mirrors Useful information .............................. 92 Correct driver's seat position ............ 92 Seats .................................................... 93 Steering wheel .................................... 99 Mirrors ............................................... 101 Memory function .............................. 103 92 Correct driver's seat position Useful information Seats, steering wheel and mirrors i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). Correct driver's seat position Ryou can fasten the seat belt properly. have moved the backrest to an almost vertical position. Ryou have set the seat cushion angle so that your thighs are gently supported. Ryou can depress the pedals properly. X Check whether the head restraint is adjusted properly (Y page 95). When doing so, make sure that you have adjusted the head restraint so that the back of your head is supported at eye level by the center of the head restraint. Ryou Observe the safety guidelines on steering wheel adjustment (Y page 99). X Check whether steering wheel : is adjusted properly. Adjusting the steering wheel manually(Y page 99) Adjusting the steering wheel electrically (Y page 100) When adjusting the steering wheel, make sure: Ryou can hold the steering wheel with your arms slightly bent. can move your legs freely. Ryou can see all the displays in the instrument cluster clearly. Ryou Observe the safety guidelines on seat adjustment (Y page 93). X Check whether you have adjusted seat = properly. Manual and electrical seat adjustment (Y page 94) Electrical seat adjustment (Y page 94) When adjusting the seat, make sure: Ryou are as far away from the driver's air bag as possible. Ryou are sitting in a normal upright position. Observe the safety guidelines for seat belts (Y page 48). X Check whether you have fastened seat belt ; properly (Y page 50). The seat belt should: Rfit snugly across your body routed across the middle of your shoulder Rbe routed in your pelvic area across the hip joints X Before starting off, adjust the rear-view mirror and the exterior mirrors Rbe (Y page 101) in such a way that you have a good view of road and traffic conditions. X Vehicles with a memory function: save the seat, steering wheel and exterior mirror settings (Y page 103). Seats Important safety notes G WARNING In order to avoid possible loss of vehicle control, all seat, head restraint, steering wheel and rear view mirror adjustments, as well as fastening of seat belts, must be done before setting the vehicle in motion. G WARNING Do not adjust the driver's seat while driving. Adjusting the seat while driving could cause the driver to lose control of the vehicle. Never travel in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide under the seat belt in a collision. If you slide under it, the seat belt would apply force at the abdomen or neck. This could cause serious or fatal injuries. The seat backrest and seat belts provide the best restraint when the wearer is in a position that is as upright as possible and seat belts are properly positioned on the body. G WARNING Your seat belt must be adjusted so that you can correctly fasten your seat belt. Observe the following points: Radjust the seat backrest until your arms are slightly angled when holding the steering wheel. Radjust the seat to a comfortable seating position that still allows you to reach the accelerator/brake pedal safely. The position should be as far back as possible with the driver still able to operate the controls properly. Radjust the head restraint so that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. Rnever place hands under the seat or near any moving parts while a seat is being adjusted. Failure to do so could result in an accident and/or serious personal injury. G WARNING The electrically adjustable seats can be operated at any time. Therefore, do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. G WARNING According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating position. Thus, we strongly recommend that children be placed in the rear seats whenever possible. Regardless of seating position, children 12 years old and under must be seated and properly secured in an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. For additional information, see "Children in the vehicle". A child's risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint. G WARNING For your protection, drive only with properly positioned head restraints. Adjust the head restraint so that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will reduce the potential for Z 93 Seats, steering wheel and mirrors Seats 94 Seats injury to the head and neck in the event of an accident or similar situation. Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. Adjusting the seats manually and electrically ! To avoid damage to the seats and the seat heating, observe the following information: Seats, steering wheel and mirrors Rkeep liquids from spilling on the seats. If liquid is spilled on the seats, dry them as soon as possible. Rif the seat covers are damp or wet, do not switch on the seat heating. The seat heating should also not be used to dry the seats. Rclean the seat covers as recommended; see the "Interior care" section. Rdo not transport heavy loads on the seats. Do not place sharp objects on the seat cushions, e.g. knives, nails or tools. The seats should only be occupied by passengers, if possible. Rwhen the seat heating is in operation, do not cover the seats with insulating materials, e.g. blankets, coats, bags, seat covers, child seats or booster seats. ! When you move the seats, make sure that there are no objects in the footwell or behind the seats. Otherwise, you could damage the seats and the objects. i The head restraints in the front seats are equipped with the NECK-PRO system (Y page 47). For this reason, it is not possible to remove the head restraints from the front seats. Vehicles without the through-loading feature: the head restraints cannot be removed from the rear compartment seats. Please contact an authorized MercedesBenz Center for more information. i Other topics: RRear bench seat through-loading feature (Y page 256) : Backrest angle ; Seat height = Seat cushion angle ? Seat fore-and-aft adjustment i AMG vehicles are equipped with a seat with an integrated head restraint. It is therefore not possible to set the height and angle of the head restraint. i Adjust the seat cushion angle so that your thighs are lightly supported. Seat fore-and-aft adjustment X Lift handle ? and slide the seat forwards or backwards. X Release lever ? again. Make sure that you hear the seat engage in position. Seat cushion angle X Turn handwheel = in the desired direction. Adjusting the seats electrically i Vehicles without Memory function: the seats can be adjusted within three minutes of a front door being opened. Seats The time period starts over again if, within these three minutes, you: i You can store the seat settings using the Ropen i AMG vehicles are equipped with a seat memory function (Y page 103). featuring an integrated head restraint and the head restraint adjustment button is deactivated. It is therefore not possible to set the height and angle of the head restraint. Rinsert the SmartKey into the ignition lock or remove it from the ignition lock Rswitch the ignition on or off If the SmartKey is in position 2 in the ignition lock, the seats can be adjusted at any time. Depending on the equipment, the seat adjustment buttons are either located on the side of the seat or on the door control panel. Adjusting the head restraints Adjusting the head restraints manually Adjusting the head restraint height3 : Head restraint height ; Seat cushion angle = Seat height ? Seat fore-and-aft adjustment A Backrest angle X To raise: pull the head restraint up to the desired position. X To lower: press release catch : in the direction of the arrow and push the head restraint down to the desired position. Adjusting the angle of the head restraints : Seat cushion angle ; Seat height = Seat fore-and-aft adjustment ? Backrest angle 3 For vehicles without memory function only. Z Seats, steering wheel and mirrors or close a front door 95 Seats 96 X Push or pull the lower edge of the head restraint in the direction of the arrow. Adjusting the head restraint height electrically4 Seats, steering wheel and mirrors X To adjust the head restraint height: slide the switch for head restraint adjustment (Y page 94) up or down in the direction of the arrow. Adjusting luxury head restraints G WARNING When folding back the side cushions, never reach between the side cushion and the mounting post. You could otherwise be trapped. Keep the area around head restraints clear of articles (e.g. clothing) to not obstruct the folding operation of the head restraints. G WARNING For your protection, drive only with properly positioned head restraints. Adjust the head restraint in such a way that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will reduce the potential for injury to the head and neck in the event of an accident or similar situation. With a rear seat occupied, make sure to move the respective head restraint up from the lowest non-use position and have the occupant adjust the head restraint properly. Do not drive the vehicle without the seat head restraints installed when the rear seats are occupied. Head restraints are intended to help reduce injuries during an accident. Adjusting the rear seat head restraint height X To adjust the side bolsters of the head restraint: push or pull right and/or lefthand side bolster : into the desired position. X To adjust the angle of the head restraint: push or pull the head restraint in the direction of arrow ;. Rear seat head restraints G WARNING For safety reasons, always drive with the rear head restraints in the upright position when the rear seats are occupied. 4 For vehicles with memory function only. If the head restraint is fully lowered, it is necessary to press release catch :. X To raise: pull the head restraint up to the desired position. X To lower: press release catch : and push the head restraint down until it is in the desired position. Seats 97 Removing and installing rear head restraints5 G WARNING X Move adjustment lever : in the direction of the arrow until the desired backrest contour is achieved. Adjusting the four-way lumbar support X Release the rear seat backrest and fold it slightly forwards (Y page 257). X To remove: pull the head restraint up to the stop. X Press release catch : and pull the head restraint out of the guides. X To re-install: insert the head restraint so that the notches on the bar are on the left when viewed in the direction of travel. X Push the head restraint down until you hear it engage in position. X Fold back the rear seat backrest until it engages. You can adjust the contour of the front seat backrests individually to provide optimum support for your back. : To raise the backrest contour ; To soften the backrest contour = To lower the backrest contour Adjusting the lumbar support You can adjust the contour of the front seats so as to provide optimum support for your back. 5 ? To harden the backrest contour Adaptive backrest (AMG vehicle) You can adjust the contour of the front seat backrests individually so as to provide optimum support for your back. Only for vehicles with through-loading facility. Z Seats, steering wheel and mirrors Occupants should only travel sitting on seats which have the head restraints installed. In the event of an accident, this reduces the risk of injury for passengers seated in the rear compartment. Seats Seats, steering wheel and mirrors 98 : To adjust the upper back support Driver's and front-passenger seat ; To adjust the contour of the backrest in The system automatically switches down from level 3 to level 2 after approximately eight minutes. The system automatically switches down from level 2 to level 1 after approximately ten minutes. The system automatically switches off approximately 20 minutes after it is set to level 1. X Make sure that the SmartKey is in position 1 or 2 in the ignition lock. X To switch on: press button : repeatedly until the desired heating level is set. X To switch off: press button : repeatedly until all the indicator lamps go out. the lumbar region = To adjust the lateral structure and support of the seat X Make sure that the SmartKey is in position 2 in the ignition lock. i If, after a certain amount of time, the seat no longer has the desired contour, repeat the adjustment. Switching the seat heating on/off Switching on/off G WARNING Repeatedly setting the seat heating to level 3 may result in excessive seat temperatures. The health of passengers that have limited temperature sensitivity or a limited ability to react to excessively high temperatures may be affected or they may even suffer burn-like injuries. Therefore, do not use seat heating level 3 repeatedly. The three red indicator lamps in the button indicate the heating level you have selected. Problems with the seat heating The seat heating has switched off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. X Switch off electrical consumers which you do not need, such as the rear window defroster or interior lighting. i If the battery voltage is too low, the seat heating may switch off. Switching the seat ventilation on/off Switching on/off The three blue indicator lamps in the buttons indicate the ventilation level you have selected. Steering wheel ventilation may switch off. X Make sure that the SmartKey is in position 2 in the ignition lock. X To switch on: press button : repeatedly until the desired ventilation level is set. feature locked could cause the driver to lose control of the vehicle. The electrical steering wheel adjustment feature can be operated at any time. Therefore, do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. Seats, steering wheel and mirrors i If the battery voltage is too low, the seat Adjusting the steering wheel manually i You can open the side windows and the sliding sunroof using the "Convenience opening" feature (Y page 84). The seat ventilation of the driver's seat automatically switches to the highest level. X To switch off: press button : repeatedly until all the indicator lamps go out. : Release lever ; To adjust the steering wheel height Problems with the seat ventilation The seat ventilation has switched off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. X Switch off electrical consumers which you do not need, such as the rear window defroster or interior lighting. Steering wheel 99 = To adjust the steering wheel position (fore-and-aft adjustment) X Push release lever : down completely. The steering column is unlocked. X Adjust the steering wheel to the desired position. X Push release lever : up completely. The steering column is locked. X Check if the steering column is locked. When doing so, try to push the steering wheel up or down or try to move it in the fore-and-aft direction. Important safety notes G WARNING Do not adjust the steering wheel while driving. Adjusting the steering wheel while driving, or driving without the steering wheel adjustment Z 100 Steering wheel Seats, steering wheel and mirrors Adjusting the steering wheel electrically G WARNING Let the system complete the adjustment procedure before setting the vehicle in motion. All steering wheel adjustment must be completed before setting the vehicle in motion. Driving off with the steering wheel still adjusting could cause the driver to lose control of the vehicle. Position of the steering wheel when the EASY-ENTRY/EXIT feature is active : To adjust the steering wheel height The steering wheel swings upwards when you: ; To adjust the steering wheel position Rremove the SmartKey from the ignition lock (fore-and-aft adjustment) i Other topics: REASY-ENTRY/EXIT feature (Y page 100) Rstoring settings (Y page 103) EASY-ENTRY/EXIT system Important safety notes The EASY-ENTRY/EXIT feature makes getting in and out of your vehicle easier. You can activate and deactivate the EASYENTRY/EXIT feature in the on-board computer (Y page 209). G WARNING You must make sure no one can become trapped or injured by the moving steering wheel when the easy-entry/exit feature is activated. To stop steering wheel movement, move steering wheel adjustment stalk or press the memory position switch. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could open the driver's door and unintentionally activate the easy-entry/exit feature, which could result in an accident and/or serious personal injury. Ropen the driver's door and KEYLESS-GO is in position 1 Ropen the driver's door and the SmartKey is in position 0 or 1 in the ignition lock i The steering wheel only moves upwards if it has not already reached the upper end stop. Position of the steering wheel for driving The steering wheel is moved to the last selected position when: Rthe driver's door is closed. insert the SmartKey into the ignition lock. or Ryou press the Start/Stop button once on vehicles with KEYLESS-GO. When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position. The last position of the steering wheel is stored after each manual setting or when you store the setting with the memory function (Y page 103). Ryou Mirrors If the crash-responsive EASY-EXIT feature is triggered in an accident, the steering column will move upwards when the driver's door is opened. This occurs irrespective of the position of the SmartKey in the ignition lock. This makes it easier to exit the vehicle and rescue the occupants. The crash-responsive EASY-EXIT feature is only operational if the EASY-EXIT/ENTRY feature is activated in the on-board computer. Mirrors Rear-view mirror Rear-view mirror (manual anti-glare) X anti-glare mode: flick anti-glare switch : forwards or back. Exterior mirrors Adjusting the exterior mirrors The exterior mirrors are automatically heated if the rear window defroster is switched on and the outside temperature is low. X Make sure that the SmartKey is in position 1 or 2 in the ignition lock. X Press button : for the left-hand exterior mirror or button ; for the right-hand exterior mirror. The indicator lamp in the corresponding button lights up in red. The indicator lamp goes out again after some time. You can adjust the selected mirror using adjustment button = as long as the indicator lamp is lit. X Press adjustment button = up, down, to the right or to the left until the exterior mirror is set to a position that provides you with a good overview of traffic conditions. Folding the exterior mirrors in or out electrically This function is only available in vehicles for Canada. G WARNING Exercise care when using the passenger-side exterior rear view mirror. The mirror surface is convex (outwardly curved surface for a wider field of view). Objects in mirror are closer than they appear. Check your interior rear view mirror and glance over your shoulder before changing lanes. Z Seats, steering wheel and mirrors Crash-responsive EASY-EXIT feature 101 Mirrors 102 X Make sure that the SmartKey is in position 1 or 2 in the ignition lock. X Briefly press button :. Both exterior mirrors fold in or out. i Make sure that the exterior mirrors are always folded out fully while the vehicle is in motion, as they may otherwise vibrate. Seats, steering wheel and mirrors i If you are driving faster than 9 mph (15 km/h), you can no longer fold in the exterior mirrors. Setting the exterior mirrors This function is only available in vehicles for Canada. If the battery has been disconnected or completely discharged, the exterior mirrors must be reset. The exterior mirrors will otherwise not fold in when you select the "Fold in mirrors when locking" function in the on-board computer (Y page 209). X Make sure that the SmartKey is in position 1 in the ignition lock. X Briefly press button :. Folding the exterior mirrors in or out automatically This function is only available in vehicles for Canada. If the "Fold in mirrors when locking" function is activated in the on-board computer (Y page 209): Rthe exterior mirrors fold in automatically as soon as you lock the vehicle from the outside. Rthe exterior mirrors fold out again automatically as soon as you unlock the vehicle and then open the driver's or frontpassenger door. i The mirrors do not fold out if they have been folded in manually. 6 Canada only Exterior mirror out of position If an exterior mirror has been pushed out of position, proceed as follows: X Vehicles without electrically folding exterior mirrors: move the exterior mirror into the correct position manually. X Vehicles with electronically folding mirrors6: press the mirror-folding button (Y page 101) repeatedly until you hear the mirror engage in position. The mirror housing is engaged again and you can adjust the exterior mirrors as usual (Y page 101). Automatic anti-glare mirrors G WARNING If incident light from headlamps is prevented from striking the sensor in the rear-view mirror, for instance, by luggage piled too high in the vehicle, the mirror's automatic antiglare function will not operate. Incident light could then blind you. This may distract you from the traffic conditions and, as a result, you may cause an accident. The rear-view mirror and the exterior mirror on the driver's side automatically go into antiglare mode if the ignition is switched on and incident light from headlamps strikes the sensor in the rear-view mirror. The mirrors do not go into anti-glare mode if reverse gear is engaged or the interior lighting is switched on. Parking position for the exterior mirror on the front-passenger side Setting and storing the parking position You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you Memory function 103 If the mirror moves out of position, repeat the steps. engage reverse gear. You can store this position. Calling up a stored parking position setting X Make sure that the vehicle is stationary and that the SmartKey is in position 2 in the ignition lock. X Press button ; for the exterior mirror on the front-passenger side. X Engage reverse gear. The exterior mirror on the front-passenger side moves to the preset parking position. X Use adjustment button = to adjust the exterior mirror to a position that allows you to see the rear wheel and the curb. The parking position is stored. i If you shift the transmission to another position, the exterior mirror on the frontpassenger side returns to the driving position. i You can also store the parking position using memory button M ?. X Make sure that the SmartKey is in position 2 in the ignition lock. X With the exterior mirror on the frontpassenger side activated, use adjustment button = to adjust the exterior mirror to a position which allows you to see the rear wheel and the curb. X Press memory button M ? and one of the arrows on adjustment button = within three seconds. The parking position is stored if the exterior mirror does not move. Turn the SmartKey to position 2 in the ignition lock. X Adjust the exterior mirror on the frontpassenger side with the corresponding button (Y page 101). X Engage reverse gear. The exterior mirror on the front-passenger side moves to the stored parking position. The exterior mirror on the front-passenger side moves back to its original position: Ras soon as you exceed a speed of 6 mph (10 km/h) Rabout ten seconds after you have disengaged reverse gear Rif you press button : for the exterior mirror on the driver's side Memory function Storing settings With the memory function, you can store up to three different settings, e.g. for three different people. The following settings are stored as a single memory preset: Rposition of the seat, backrest and head restraint Rdriver's side: steering wheel position Rdriver's side: position of the exterior mirrors on the driver's and front-passenger sides G WARNING Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle. Z Seats, steering wheel and mirrors X Memory function Seats, steering wheel and mirrors 104 X Adjust the seat (Y page 94). On the driver's side, adjust the steering wheel (Y page 100) and the exterior mirrors (Y page 101). X Press memory button M and one of the storage position buttons 1, 2 or 3 within three seconds. The settings are stored in the selected preset position. A tone sounds when the settings have been completed. X Calling up a stored setting ! If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest. The seat could otherwise be damaged. X Press and hold the relevant storage position button 1, 2 or 3 until the seat, steering wheel and exterior mirrors are in the stored position. i The setting procedure is interrupted as soon as you release the storage position button. 105 106 106 112 113 116 Lights and windshield wipers Useful information ............................ Exterior lighting ................................ Interior lighting ................................. Replacing bulbs ................................. Windshield wipers ............................ Exterior lighting 106 Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. Light switch Operation Depending on the date of manufacture of your vehicle, the c or à symbol for the automatic headlamp mode/daytime running lamps is located on the light switch. Lights and windshield wipers i Please read the information on qualified specialist workshops (Y page 24). Exterior lighting Important safety notes For reasons of safety, Mercedes-Benz recommends that you drive with the lights switched on even during the daytime. In some countries, operation of the headlamps varies due to legal requirements and self-imposed obligations. Information about driving abroad Converting to symmetrical low beam when driving abroad: switch the headlamps to symmetrical low beam in countries in which traffic drives on the opposite side of the road to the country where the vehicle is registered. This prevents glare to oncoming traffic. Symmetrical lights do not illuminate as large an area of the edge of the road. Have the headlamps converted at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, as close to the border as possible before driving in these countries. Converting to asymmetrical low beam after returning: have the headlamps converted back to asymmetrical low beam at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, as soon as possible after crossing the border again. 7 Illustration: light switch with the à symbol for the automatic headlamp mode/daytime running lamps 1W Left-hand standing lamps 2X Right-hand standing lamps 3T Parking lamps, license plate and instrument cluster lighting 4à Automatic headlamp mode/daytime running lamps 5L Low-beam/high-beam headlamps BR Rear fog lamp CN Front fog lamps7 Only vehicles with front fog lamps have the fog lamps function. Exterior lighting 107 Low-beam headlamps X To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. X Turn the light switch to L. The L indicator lamp in the instrument cluster lights up. Illustration: light switch with the c symbol for the automatic headlamp mode/daytime running lamps 1W Left-hand standing lamps 2X Right-hand standing lamps 3T Parking lamps, license plate and instrument cluster lighting 4c Automatic headlamp mode/daytime running lamps 5L Low-beam/high-beam headlamps BR Rear fog lamp CN Front fog lamps7 The turn signals, high-beam headlamps and the high-beam flasher are operated using the combination switch (Y page 109). ! Switch off the parking lamps and standing lamps when you leave the vehicle. This prevents the battery from discharging. The exterior lighting (except the parking/ standing lamps) switches off automatically if you: Rremove the SmartKey from the ignition lock Ropen the driver's door with the SmartKey in position 0 If you hear a warning tone when you leave the vehicle, the lights may still be switched on. X Turn the light switch to c or Ã. 7 Daytime running lamps in Canada The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated. X Turn the light switch to c or Ã. With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on. When the low-beam headlamps are switched on, the L indicator lamp in the instrument cluster lights up. When the engine is running and the vehicle is stationary: if you move the selector lever from a drive position to P (vehicles with automatic transmission) or if the parking brake is applied, the low-beam headlamps go out after three minutes. When the engine is running, the vehicle is stationary and in high ambient light brightness: if you turn the light switch to T, the daytime running lamps and the parking lamps are switched on. If the engine is running and you turn the light switch to L, the manual settings take precedence over the daytime running lamps. Daytime running lamps in the USA This function is only available on vehicles with daytime running lamps. In the USA, the daytime running lamps are deactivated upon delivery from the factory. X To activate the daytime running lamps (vehicles with a luxury multifunction Only vehicles with front fog lamps have the fog lamps function. Lights and windshield wipers Daytime running lamps Exterior lighting 108 Lights and windshield wipers steering wheel): you can activate the daytime running lamps function using the on-board computer (Y page 207). X Turn the light switch to c or Ã. With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on. When the low-beam headlamps are switched on, the L indicator lamp in the instrument cluster lights up. It is only possible to activate the high-beam headlamps if the brightness of the ambient light is at a low level. However, the high-beam flasher can always be used. If the engine is running and you turn the light switch to T or L, the manual settings take precedence over the daytime running lamps. Automatic headlamp mode X To switch on automatic headlamp mode: turn the light switch to c or Ã. SmartKey in position 1 in the ignition lock: the parking lamps are switched on or off automatically depending on the brightness of the ambient light. With the engine running: depending on the brightness of the ambient light, the daytime running lamps8 or the low-beam headlamps are switched on or off automatically. When the low-beam headlamps are switched on, the L indicator lamp in the instrument cluster lights up. G WARNING If the light switch is set to c or Ã, the low-beam headlamps will not come on automatically if it is foggy. This could endanger you and others. Therefore, turn the light switch to L in fog. 8 The automatic headlamp feature is only an aid. The driver is responsible for the vehicle's lighting at all times. Front fog lamps Only vehicles with front fog lamps have the fog lamps function. G WARNING If you suspect that driving conditions will be foggy, turn the light switch to L before you start your journey. Otherwise, your vehicle may not be visible and you could endanger yourself and others. X To switch on the front fog lamps: turn the SmartKey in the ignition lock to position 2 or start the engine. X Turn the light switch to L or c or Ã. X Press the N button. The green N indicator lamp in the instrument cluster lights up. X To switch off the front fog lamps: press the N button. The green N indicator lamp in the instrument cluster goes out. Rear fog lamp X To switch on the rear fog lamp: turn the SmartKey in the ignition lock to position 2 or start the engine. X Turn the light switch to L or c or Ã. If the light switch is set to c or Ã, the rear fog lamp only lights up if the lowbeam headlamps are on. Only if daytime running lamps have been activated via the on-board computer. Exterior lighting Press the R button. The yellow R indicator lamp in the instrument cluster lights up. X To switch off the rear fog lamp: press the R button. The yellow R indicator lamp in the instrument cluster goes out. Headlamp cleaning system The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running (Y page 116). Combination switch Turn signals High-beam headlamps X To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. X Turn the light switch to L or c or Ã. X Press the combination switch beyond the pressure point in the direction of arrow :. In the c or à position, the highbeam headlamps are only switched on when it is dark and the engine is running. The K indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on. X To switch off the high-beam headlamps: move the combination switch back to its normal position. The K indicator lamp in the instrument cluster goes out. High-beam flasher X To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. X Pull the combination switch in the direction of arrow =. : High-beam headlamps ; Right turn signal = High-beam flasher Hazard warning lamps ? Left turn signal X To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow ; or ?. The corresponding turn signal flashes three times. X To indicate: press the combination switch beyond the pressure point in the direction of arrow ; or ?. Z Lights and windshield wipers X 109 110 Exterior lighting The hazard warning lamps automatically switch on if: air bag is deployed. vehicle is slowed down severely from a speed of over 45 mph (70 km/h) and comes to a halt. X To switch on the hazard warning lamps: press button :. All turn signals flash. If you now switch on a turn signal using the combination switch, only the turn signal lamp on the corresponding side of the vehicle will flash. X To switch off the hazard warning lamps: press button :. Cornering light function Ran Lights and windshield wipers Rthe The hazard warning lamps are deactivated automatically if the vehicle returns to a speed of over 6 mph (10 km/h) after a full application of the brakes. The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the low-beam headlamps are switched on. Active: i The hazard warning lamps still operate if Rif the ignition is switched off. Active light function The active light function is a system that moves the headlamps according to the steering movements of the front wheels. In this way, relevant areas remain illuminated while driving. This allows you to recognize pedestrians, cyclists and animals. Active: when the lights are switched on. you are driving at speeds below 25 mph (40 km/h) and switch on the turn signals or turn the steering wheel. Rif you are driving at speeds between 25 mph (40 km/h) and 45 mph (70 km/h) or turn the steering wheel. Not active: if you are driving at speeds above 25 mph (40 km/h) or switch off the turn signal or turn the steering wheel to the straight-ahead position. The cornering light function may remain lit for a short time, but is automatically switched off after no more than three minutes. Adaptive Highbeam Assist You can use this function to set the headlamps to change between low beam and high beam automatically. The system recognizes vehicles with their lights on, either approaching from the opposite direction or traveling in front of your vehicle, and consequently switches the headlamps from high beam to low beam. The system automatically adapts the lowbeam headlamp range depending on the distance to the other vehicle. Once the system no longer detects any other vehicles, it reactivates the high-beam headlamps. The system's optical sensor is located behind the windshield near the overhead control panel. When you drive slower than approximately 30 mph (45 km/h) or if other road users are identified or if the roads are sufficiently illuminated: the high-beam headlamps are switched off automatically. The K indicator lamp in the instrument cluster goes out. The _ indicator lamp in the instrument cluster stays on. X To deactivate: move the combination switch back to its normal position. The _ indicator lamp in the instrument cluster goes out. G WARNING The Adaptive Highbeam Assist is only an aid intended to support you while driving. The driver is and remains responsible for proper vehicle lighting in accordance with the prevailing light, sight and traffic conditions. The system may be impaired or unavailable when Rvisibility is poor, e.g. due to snow, rain, fog, X To activate: activate the Adaptive Highbeam Assist function using the onboard computer (Y page 207). X Turn the light switch to c or Ã. X Press the combination switch beyond the pressure point in the direction of arrow : (Y page 109). If it is dark and the light sensor activates the low-beam headlamps, the _ indicator lamp in the instrument cluster lights up. If you drive faster than approximately 28 mph (45 km/h): the headlamp range is set automatically depending on the distance between the vehicle and other road users. If you drive faster than approximately 35 mph (55 km/h) and no other road users are identified: the high-beam headlamps are switched on automatically. The K indicator lamp in the instrument cluster also lights up. or heavy spray Rthe optical sensor area of the windshield is dirty, fogged up, or covered by a sticker for example The system cannot recognize the following road users: RRoad users without a lighting system of their own, e.g. pedestrians RRoad users with dim lighting of their own, e.g. cyclists RRoad users whose lighting is obstructed, e.g. road users behind a guardrail RIn some seldom cases, even road users with a lighting system of their own may be recognized too late or not at all. The automatic high-beam headlamps will then not be deactivated or it will be activated in spite of preceding or oncoming road users. This could endanger you and/or others and cause an accident. Always pay close attention to the traffic situation and switch off the high beam manually if necessary. Z 111 Lights and windshield wipers Exterior lighting 112 Interior lighting Headlamps fogged up on the inside The headlamps may fog up on the inside if there is high atmospheric humidity. X Drive with the headlamps switched on. The level of moisture diminishes, depending on the length of the journey and the weather conditions (humidity and temperature). Lights and windshield wipers If the level of moisture does not diminish: X Have the headlamps checked at a qualified specialist workshop. Rear-compartment overhead control panel : p Switches the right-hand reading lamp on/off Interior lighting ; p Switches the left-hand reading lamp on/off Overview of interior lighting Interior lighting control Important notes In order to prevent the vehicle's battery from discharging, the interior lighting functions are automatically deactivated after some time except for when the SmartKey is in position 2 in the ignition lock. Automatic interior lighting control Front overhead control panel : u Switches the rear interior lighting on/off ; | Switches the automatic interior lighting control on/off = p Switches the right-hand front reading lamp on/off ? c Switches the front interior lighting on/off A p Switches the left-hand front reading lamp on/off X To switch on/off: press the | button. When the automatic interior lighting control is activated, the button is flush with the overhead control panel. The interior lighting automatically switches on if you: Runlock the vehicle a door Rremove the SmartKey from the ignition lock The interior light is activated for a short while when the SmartKey is removed from the ignition lock. You can activate this delayed switch-off using the on-board computer (Y page 208). Ropen Replacing bulbs X To switch the front interior lighting on/ off: press the c button. X To switch the rear interior lighting on/ off: press the u button. X To switch the reading lamps on/off: press the p button. Crash-responsive emergency lighting The interior lighting is activated automatically if the vehicle is involved in an accident. X To switch off the crash-responsive emergency lighting: press the hazard warning lamp button. or X Lock and then unlock the vehicle using the SmartKey. Replacing bulbs Important safety notes Xenon bulbs If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the engine. For this to be observed, the lights must be switched on before starting the engine. G DANGER Xenon bulbs carry a high voltage. You could get an electric shock and be seriously or even fatally injured if you touch the electric contacts on Xenon bulbs. Therefore, never remove the cover from Xenon bulbs. Do not change Xenon bulbs yourself, but have them replaced at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required. Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times. Have the headlamp setting checked regularly. Other bulbs There are bulbs other than the Xenon bulbs that you cannot replace. Replace only the bulbs listed (Y page 114). Have the bulbs that you cannot replace yourself changed at a qualified specialist workshop. Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. If you require assistance changing bulbs, consult a qualified specialist workshop. Do not touch the glass tube of new bulbs with your bare hands. Even minor contamination can burn into the glass surface and reduce the service life of the bulbs. Always use a lintfree cloth or only touch the base of the bulb when installing. Only use bulbs of the correct type. If the new bulb still does not light up, consult a qualified specialist workshop. Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times. Have the headlamp setting checked regularly. G WARNING Bulbs and lamps can be very hot. You should therefore allow them to cool down before you change them. Otherwise, you could be burned if you touch them. Keep bulbs out of the reach of children. Otherwise, they could damage the bulbs, for example, and injure themselves. Z Lights and windshield wipers Manual interior lighting control 113 114 Replacing bulbs Never use a bulb which has been dropped. Such a bulb may break or even explode and injure you. Halogen bulbs are pressurized and can explode when you change them, particularly if they are very hot. You should therefore wear eye protection and gloves when you are changing them. Lights and windshield wipers Overview: changing bulbs/bulb types You can change the following bulbs. The bulb type can be found in the legend. Tail lamp : Backup lamp: P 21 W ; Brake lamp: P 21 W = Brake lamp/tail lamp: P 21 W Changing the front bulbs Low-beam headlamps (halogen headlamps) Halogen headlamps : Parking lamp/standing lamp: W 5 W ; High-beam headlamp: H7 55 W = Low-beam headlamp: H7 55 W X Switch off the lights. Open the hood. X Turn housing cover : counter-clockwise and pull it out. X Turn bulb holder ; counter-clockwise and pull it out. X Take the bulb out of bulb holder ;. X Insert the new bulb into bulb holder ;. X Insert bulb holder ; into the lamp and turn it clockwise. X Align housing cover : and turn it clockwise until it engages. X Bi-Xenon headlamps : Cornering lamp: H7 55 W Replacing bulbs High-beam headlamps (halogen headlamps) 115 X Take the bulb out of bulb holder ;. X Insert the new bulb into bulb holder ;. X Insert bulb holder ;. X Align housing cover : and turn it clockwise until it engages. X Switch off the lights. Open the hood. X Turn housing cover : counter-clockwise and pull it out. X Turn bulb holder ; counter-clockwise and pull it out. X Take the bulb out of bulb holder ;. X Insert the new bulb into bulb holder ;. X Insert bulb holder ; into the lamp and turn it clockwise. X Align housing cover : and turn it clockwise until it engages. X Parking lamps/standing lamps (halogen headlamps) X Switch off the lights. Open the hood. X Turn housing cover : counter-clockwise and pull it out. X Turn bulb holder ; counter-clockwise and pull it out. X Take the bulb out of bulb holder ;. X Insert the new bulb into bulb holder ;. X Insert bulb holder ; into the lamp and turn it clockwise. X Align housing cover : and turn it clockwise until it engages. X Changing the rear bulbs Opening and closing the side trim panels X Switch off the lights. X Open the hood. X Turn housing cover : counter-clockwise and pull it out. X Pull out bulb holder ;. You must open the side trim panel in the trunk and remove the first-aid kit before you can change the bulbs in the tail lamps. Z Lights and windshield wipers Cornering light function (Bi-Xenon headlamps) Windshield wipers 116 X Remove the tail lamp connector X Simultaneously press retaining lugs : in the direction of the arrow and slightly pull out the bulb holder with the bulbs. X Remove the connector for LED light functions from the top of the bulb holder. X Pull the bulb holder out with the bulbs. Lights and windshield wipers Left-hand side trim panel : Backup lamp ; Brake lamp = Parking lamp/brake lamp Right-hand side trim panel X To open: turn rotary catch :90° in the direction of the arrow and remove side trim panel ;. X To close: insert side trim panel ; and turn release knob : 90° in the opposite direction to the arrow. Tail lamp X Switch off the lights. Open the trunk. X Open the side trim panel (Y page 115). X X Press the respective bulb :, ; or = back and turn it counter-clockwise to remove it from the bulb holder. X Insert the new bulb into the bulb holder and turn it clockwise. X Reinsert the connector for LED light functions in the bulb holder. X Insert the bulb holder again and lock it in place. X Insert the tail lamp connector. X Close the side trim panel (Y page 115). Windshield wipers Switching the windshield wipers on/ off G WARNING Wiper blades are components that are subject to wear and tear. Replace the wiper blades twice a year, preferably in the spring and fall. Otherwise the windshield will not be wiped properly. As a result, you may not be able to Windshield wipers inadvertently. This could then damage the windshield wiper blades or scratch the windshield. For this reason, you should always switch off the windshield wipers in dry weather. observe surrounding traffic conditions and could cause an accident. ! Do not operate the windshield wipers ! If the windshield wipers leave smears on the windshield after the vehicle has been washed in an automatic car wash, wax or other residues may be the reason for this. Clean the windshield using washer fluid after washing the vehicle in an automatic car wash. Combination switch 1 $ Windshield wipers off 2 Ä Intermittent wipe, low9 In the Ä or Å position, the appropriate wiping frequency is set automatically according to the intensity of the rain. In the Å position, the rain sensor is more sensitive than in the Ä position, causing the windshield wipers to wipe more frequently. Switching the rear window wiper on/ off Combination switch : è Switch 2 ô To wipe with washer fluid 3 Å Intermittent wipe, high10 3 I To switch on intermittent wiping 4 ° Continuous wipe, slow 4 0 To switch off intermittent wiping 5 ¯ Continuous wipe, fast 5 ô To wipe with washer fluid B í Single wipe/ î To wipe the windshield using washer fluid X X Switch on the ignition. Turn the combination switch to the corresponding position. ! Intermittent wiping with rain sensor: due X Turn the SmartKey to position 1 or 2 in the ignition lock. X Turn switch : on the combination switch to the corresponding position. When the rear window wiper is switched on, the icon appears in the instrument cluster. to optical influences and the windshield becoming dirty in dry weather conditions, the windshield wipers may be activated 9 Rain sensor set to low sensitivity. sensor set to high sensitivity. 10 Rain Z Lights and windshield wipers when the windshield is dry, as this could damage the wiper blades. Moreover, dust that has collected on the windshield can scratch the glass if wiping takes place when the windshield is dry. 117 118 Windshield wipers Replacing the wiper blades Important safety notes G WARNING Lights and windshield wipers For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the on-board electronics are in state 0). Otherwise, the wiper motor could be switched on suddenly and cause injury. X ! To avoid damaging the wiper blades, make sure that you touch only the wiper arm of the wiper. ! Never open the hood if a windshield wiper arm has been folded away from the windshield. Never fold a windshield wiper arm without a wiper blade back onto the windshield. Hold the windshield wiper arm firmly when you change the wiper blade. If you release the windshield wiper arm without a wiper blade and it falls onto the windshield, the windshield may be damaged by the force of the impact. Mercedes-Benz recommends that you have the wiper blades replaced by a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center. Remove the wiper blade from the retaining pin on the wiper arm in the direction of the arrow. Installing the wiper blades X Push the new wiper blade onto the retaining pin on the wiper arm in the opposite direction to the arrow. Make sure that the wiper blade slides fully onto the retaining pin on the wiper arm. X Turn the wiper blade parallel to the wiper arm. X Fold the wiper arm back onto the windshield. Replacing the rear window wiper blade Removing the wiper blade Replacing the windshield wiper blades Removing the wiper blades X Remove the SmartKey from the ignition lock or turn it to position 0 (KEYLESS-GO). X Fold the wiper arm away from the windshield until it engages. X Set the wiper blade at right angles to the wiper arm. X Remove the SmartKey from the ignition lock. X Fold wiper arm : away from the rear window until it engages. X Position wiper blade ; at a right angle to wiper arm :. Windshield wipers Hold wiper arm : and press wiper blade ; in the direction of the arrow until it releases. X Remove wiper blade ;. Installing the wiper blade X Place new wiper blade ; onto wiper arm :. X Hold wiper arm : and press wiper blade ; in the opposite direction to the arrow until it engages. X Make sure that wiper blade ; is seated correctly. X Position wiper blade ; parallel to wiper arm :. X Fold wiper arm : back onto the rear window. The spray nozzles are misaligned The windshield washer fluid from the spray nozzles no longer hits the center of the windshield. The spray nozzles are misaligned. X Have the spray nozzles adjusted at a qualified specialist workshop. Lights and windshield wipers X 119 Problems with the windshield wipers The windshield wipers are obstructed Leaves or snow, for example, may be obstructing the windshield wiper movement. The wiper motor has been deactivated. X For safety reasons, you should remove the SmartKey from the ignition lock. or X Switch off the engine using the Start/Stop button and open the driver's door. X Remove the cause of the obstruction. X Switch the windshield wipers back on. The windshield wipers are inoperative The windshield wiper drive is malfunctioning. X Select another wiper speed on the combination switch. X Have the windshield wipers checked at a qualified specialist workshop. Z 120 121 122 122 126 131 Climate control Useful information ............................ Overview of climate control systems ................................................... Operating the climate control system ..................................................... Setting the air vents ......................... 122 Overview of climate control systems Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified Climate control specialist workshops (Y page 24). Overview of climate control systems Important safety notes G WARNING Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interior and the windows could fog up, impairing visibility and endangering you and others. Have a blocked filter replaced at a MercedesBenz Center as soon as possible. sunroof/panorama roof with power tilt/ sliding panel closed. i Ventilate the vehicle for a brief period during warm weather, e.g. using the convenience opening feature (Y page 84). This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly. i The integrated filter can filter out most particles of dust and completely filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle interior. For this reason, you should always observe the interval for replacing the filter, which is specified in the Service Booklet. As it depends on environmental conditions, e.g. heavy air pollution, the interval may be shorter than stated in the Service Booklet. i It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system. G WARNING Follow the recommended settings for heating and cooling given on the following pages. Otherwise, the windows could fog up, impairing visibility and endangering you and others. The automatic climate control adjusts the temperature and the humidity of the vehicle interior and filters undesired substances from the air. The automatic climate control is only operational when the engine is running.11 Optimum operation is only achieved if you drive with the side windows and sliding 11 Automatic climate control: the residual heat function can only be activated/deactivated when the ignition is switched off. Overview of climate control systems 123 Climate control Control panel for dual-zone automatic climate control Canada only : To set the temperature, left (Y page 128) ; To defrost the windshield (Y page 129) = To switch the ZONE function on/off (Y page 129) ? To activate/deactivate cooling with air dehumidification (Y page 126) A To switch the rear window defroster on/off (Y page 130) B To set the temperature, right (Y page 128) C To activate/deactivate air-recirculation mode (Y page 130) D To set the air distribution (Y page 128) E To increase the airflow (Y page 129) F To reduce the airflow (Y page 129) G To switch climate control on/off (Y page 126) H To set climate control to automatic (Y page 127) Z Climate control 124 Overview of climate control systems USA only : To set the temperature, left (Y page 128) ; To defrost the windshield (Y page 129) = To switch maximum cooling MAX COOL on/off (Y page 130) ? To activate/deactivate cooling with air dehumidification (Y page 126) A To switch the rear window defroster on/off (Y page 130) B To set the temperature, right (Y page 128) C To activate/deactivate air-recirculation mode (Y page 130) D To set the air distribution (Y page 128) E To increase the airflow (Y page 129) F To reduce the airflow (Y page 129) G To switch climate control on/off (Y page 126) H To set climate control to automatic (Y page 127) Notes on using dual-zone automatic climate control The following contains notes and recommendations on optimum use of dualzone automatic climate control. RActivate climate control using the à and ¿ buttons. The indicator lamps in the à and ¿ buttons light up. RSet the temperature to 72 ‡ (22 †). ROnly use the "defrosting" function briefly until the windshield is clear again. ROnly use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel. The windows could otherwise fog up as, in air-recirculation mode, no fresh air is drawn into the vehicle. RUse the ZONE function to adopt the temperature settings on the driver's side for the front-passenger side as well. The indicator lamp in the á button goes out. Overview of climate control systems 125 Climate control Control panel for 3-zone automatic climate control Canada only Front control panel : To set the temperature, left (Y page 128) ; To defrost the windshield (Y page 129) = To activate/deactivate the residual heat function (Y page 131) ? To activate/deactivate cooling with air dehumidification (Y page 126) A To switch the rear window defroster on/off (Y page 130) B To set the temperature, right (Y page 128) C To switch the ZONE function on/off (Y page 129) D To switch climate control on/off (Y page 126) E To set the air distribution (Y page 128) F To increase the airflow (Y page 129) G To reduce the airflow (Y page 129) H To adjust the climate control settings (AIR FLOW) (Y page 127) I To activate/deactivate air-recirculation mode (Y page 130) J To set climate control to automatic (Y page 127) Rear control panel K To increase the airflow (Y page 129) L To reduce the airflow (Y page 129) M Display N To reduce the temperature (Y page 128) O To increase the temperature (Y page 128) Z 126 Operating the climate control system Climate control Notes on using 3-zone automatic climate control The following contains instructions and recommendations to enable you to get the most out of your automatic climate control. RActivate climate control using the à and ¿ buttons. The indicator lamps in the à and ¿ buttons light up. RIn automatic mode, you can also use the ñ button to set a climate mode (FOCUS/MEDIUM/DIFFUSE). The MEDIUM level is recommended. RSet the temperature to 72 ‡ (22 †). ROnly use the "defrosting" function briefly until the windshield is clear again. ROnly use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel. The windows could otherwise fog up as, in air-recirculation mode, no fresh air is drawn into the vehicle. RUse the ZONE function to adopt the temperature settings on the driver's side for the front-passenger side and the rear compartment as well. The indicator lamp in the á button goes out. RUse the residual heat function if you want to heat or ventilate the vehicle interior when the ignition is switched off. The "residual heat" function can only be activated or deactivated with the ignition switched off. Operating the climate control system Activating/deactivating climate control Important information G WARNING When the climate control system is deactivated, the outside air supply and circulation are also deactivated. Only choose this setting for a short time. Otherwise the windows could fog up, impairing visibility and endangering you and others. i Switch on climate control primarily using the à button (Y page 127). Activating/deactivating X Turn the SmartKey to position 2 in the ignition lock. X To switch on: press the à button. The indicator lamp in the à button lights up. Airflow and air distribution are set to automatic mode. or X Press the ^ button. The indicator lamp in the ^ button goes out. The previously selected settings come into effect again. X To switch off: press the ^ button. The indicator lamp in the ^ button lights up. Activating/deactivating the cooling with air dehumidification function Important information The cooling with air dehumidification function is only available when the engine is running. The air inside the vehicle is cooled and dehumidified according to the temperature selected. G WARNING If you switch off the cooling function, the vehicle will not be cooled when weather conditions are warm. The windows can fog up more quickly. Window fogging may impair visibility and endanger you and others. Condensation may drip from the underside of the vehicle when it is in cooling mode. This is normal and not a sign that there is a malfunction. Operating the climate control system function uses refrigerant R134a. This coolant does not contain chlorofluorocarbons, and therefore does not damage the ozone layer. Activating/deactivating X To activate: press the ¿ button. The indicator lamp in the ¿ button lights up. X To switch off: press the ¿ button. The indicator lamp in the ¿ button goes out. The cooling with air dehumidification function has a delayed switch-off feature. X Turn the SmartKey to position 2 in the ignition lock. X Set the desired temperature. X To activate: press the à button. The indicator lamp in the à button lights up. Automatic air distribution and airflow are activated. i 3-zone automatic climate control: when automatic mode is activated, you can select a climate mode setting (Y page 127). X X Problems with the cooling with air dehumidification function When you press the ¿ button, the indicator lamp in the button flashes three times or remains off. You can no longer switch on the cooling with air dehumidification function. X Consult a qualified specialist workshop. Setting climate control to automatic G WARNING If you switch off the cooling function, the vehicle will not be cooled when weather conditions are warm. The windows can fog up more quickly. Window fogging may impair visibility and endanger you and others. In automatic mode, the set temperature is maintained automatically at a constant level. The system automatically regulates the temperature of the dispensed air, the airflow and the air distribution. Automatic mode will achieve optimal operation if cooling with air dehumidification is also activated. If desired, cooling with air dehumidification can be deactivated. To switch off: press the _ button. or Press the K or I button. The indicator lamp in the à button goes out. Automatic air distribution and airflow are deactivated. Adjusting the climate mode settings (AIR FLOW) This function is only available with 3-zone automatic climate control. The climate mode settings are especially effective at high temperatures. You can select the following climate mode settings in automatic mode: FOCUS high airflow that is set slightly cooler MEDIUM medium airflow, standard setting DIFFUSE low airflow that is set slightly warmer and with less draft X Turn the SmartKey to position 2 in the ignition lock. X Press the à button. X Press the ñ button repeatedly until the desired climate mode appears in the display. Z Climate control i The cooling with air dehumidification 127 Operating the climate control system 128 Setting the temperature Dual-zone automatic climate control Different temperatures can be set for the driver's and front-passenger sides. X Climate control Turn the SmartKey to position 2 in the ignition lock. X To increase/reduce: turn controls : and B clockwise or counter-clockwise (Y page 123). Only change the temperature setting in small increments. Start at 72 ‡ (22 †). 3-zone automatic climate control X Turn control : clockwise or counterclockwise (Y page 125). Only change the temperature setting in small increments. Start at 72 ‡ (22 †). X To increase/reduce the temperature in the rear compartment using the rear control panel: press the r or s button on the rear control panel. Only change the temperature setting in small increments. Start at 72 ‡ (22 †). i If you leave the vehicle parked for longer than 30 minutes, the temperature setting for the rear compartment then switches back to 22 ‡. Setting the air distribution Air distribution settings Automatic climate control climate zones You can select different temperature settings for the driver's and front-passenger sides as well as for the rear compartment. X Turn the SmartKey to position 2 in the ignition lock. X To increase/reduce the temperature in the front: turn controls : and B clockwise or counter-clockwise (Y page 125). Only change the temperature setting in small increments. Start at 72 ‡ (22 †). X To increase/reduce the temperature in the rear compartment using the front control panel: press the á button. The indicator lamp in the á button goes out. 12 Canada only. P Directs air through the center and side air vents O Directs the airflow through the footwell air vents S Directs air through the center, side and footwell vents ¯ Directs air through the defroster vents b Directs the airflow through the defroster, center and side air vents12 a Directs air through the defroster and footwell vents _ Directs the airflow through the defroster, center and side air vents as well as the footwell air vents12 i Regardless of the air distribution setting, airflow is always directed through the side air vents.. The side air vents can only be closed when the controls on the side air vents are turned downwards. Operating the climate control system X Setting the airflow X Turn the SmartKey to position 2 in the ignition lock. X To increase/reduce: press the K or I button. i You can use automatic climate control to set the airflow in the rear compartment separately. 3-zone automatic climate control: the temperature setting for the driver's side is adopted for the front-passenger side and the rear compartment. Defrosting the windshield You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows. i You should only select the defrosting function until the windshield is clear again. X Turn the SmartKey to position 2 in the ignition lock. X To activate: press the ¬ button. The indicator lamp in the ¬ button lights up. The climate control system switches to the following functions: Rcooling with air dehumidification on airflow13 Rhigh temperature13 Rair distribution to the windshield and front side windows Rair-recirculation mode off Switching the ZONE function on/off This function is only available in vehicles for Canada. X To switch on: press the á button. The indicator lamp in the á button lights up. Dual-zone automatic climate control: the temperature setting for the driver's side is not adopted for the front-passenger side. 3-zone automatic climate control: the temperature setting for the driver's side is not adopted for the front-passenger side and the rear compartment. When the buttons for temperature, airflow or air distribution are activated, the temperature setting for the driver's side is not adopted for the other climate control zones. X To switch off: press the á button. The indicator lamp in the á button goes out. Dual-zone automatic climate control: the temperature setting for the driver's side is adopted for the front-passenger side. 13 Depending Rhigh X To switch off: press the ¬ button. The indicator lamp in the ¬ button goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Airrecirculation mode remains deactivated. or X Press the à button. The indicator lamp in the ¬ button goes out. Airflow and air distribution are set to automatic mode. or X Turn temperature control : or B clockwise or counter-clockwise (Y page 123), (Y page 125). on the outside temperature. Z Climate control Turn the SmartKey to position 2 in the ignition lock. X Press the _ button repeatedly until the desired symbol appears in the display. The indicator lamp in the à button goes out. Automatic control is deactivated and the air distribution is controlled according to the selected setting. 129 Operating the climate control system 130 or X Press the K or I button. MAX COOL maximum cooling The MAX COOL function is only available in vehicles for the USA. MAX COOL is only operational when the engine is running. When you activate MAX COOL, climate control switches to the following functions: Rmaximum cooling airflow Rair-recirculation mode on X To activate: press the Ù button. The indicator lamp in the button lights up. X To deactivate: press the Ù button again. The indicator lamp goes out. The previously selected settings come into effect again. Climate control Rmaximum Rear window defroster Activating/deactivating G WARNING Any accumulation of snow and ice should be removed from the rear window before driving. Visibility could otherwise be impaired, endangering you and others. The rear window defroster has a high current draw. You should therefore switch it off as soon as the window is clear as it only switches off automatically after several minutes. If the battery voltage is too low, the rear window defroster may switch off. X Turn the SmartKey to position 2 in the ignition lock. X Press the ¤ button. The indicator lamp in the ¤ button lights up or goes out. Problems with the rear window defroster Defrosting the windows Windows fogged up on the inside X Activate the cooling with air dehumidification function ¿. X Activate automatic mode Ã. X If the windows continue to fog up, activate the defrosting function (Y page 129). The rear window defroster has deactivated itself prematurely or cannot be activated. X Switch off any consumers that are not required, e.g. reading lamps or interior lighting. When the battery is sufficiently charged, the rear window defroster is activated again automatically. i You should only select this setting until the windshield is clear again. Windows fogged up on the outside X Switch on the windshield wipers. X Press the _ button repeatedly until the O or P symbol appears in the display. i You should only select this setting until the windshield is clear again. Activating/deactivating airrecirculation mode You can deactivate the flow of fresh air if unpleasant odors are entering the vehicle from outside. The air already inside the vehicle will then be recirculated. The operation of air-recirculation mode is the same for all control panels. G WARNING Fogged windows impair visibility, endangering you and others. If the windows Setting the air vents X Turn the SmartKey to position 2 in the ignition lock. X To activate: press the g button. The indicator lamp in the g button lights up. i In the event of high pollution levels14 or at high outside temperatures, airrecirculation mode is automatically activated. When air-recirculation mode is activated automatically, the indicator lamp in the g button is not lit. Outside air is added after about 30 minutes. X To switch off: press the g button. The indicator lamp in the g button goes out. i Air-recirculation mode deactivates automatically: Rafter approximately five minutes if outside temperatures are less than about 41 ‡ (5 †) Rafter approximately five minutes if cooling with air dehumidification is deactivated Rafter approximately 30 minutes if outside temperatures are over about 41 ‡ (5 †) Activating/deactivating the residual heat function The residual heat function is only available in vehicles for Canada with automatic climate control. 14 Automatic It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set. i The blower will run at a low speed regardless of the airflow setting. i If you activate the residual heat function at high temperatures, only the ventilation will be activated. The blower runs at medium speed. X Turn the SmartKey to position 0 in the ignition lock or remove it. X To activate: press the Ì button. The indicator lamp in the Ì button lights up. X To switch off: press the Ì button. The indicator lamp in the Ì button goes out. i Residual heat is deactivated automatically: Rafter about 30 minutes the ignition is switched on Rif the battery voltage drops Rif the coolant temperature is too low Rwhen Setting the air vents Important safety notes G WARNING When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This could cause burns or frostbite to unprotected skin in the immediate area of the air vents. Always keep sufficient distance between unprotected parts of the body and the air vents. If necessary, use the air distribution adjustment to direct the air to air vents in the climate control only. Z Climate control begin to fog on the inside, switching off the air recirculation mode immediately should clear interior window fogging. If interior window fogging persists, make sure the air conditioning is activated, or press the ¬ button. 131 Setting the air vents 132 vehicle interior that are not in the immediate area of unprotected skin. Setting the side air vents In order to ensure the direct flow of fresh air through the air vents into the vehicle interior, please observe the following notes: Rkeep the air inlet between the windshield and the hood free of blockages, such as ice, snow or leaves. Rnever cover the air vents or air intake grille in the vehicle interior. i For virtually draft-free ventilation, adjust Climate control the sliders of the air vents to the center position. X To open/close: turn thumbwheel = to the left or right. i Side window defroster vent : is never Setting the center air vents completely shut, even if side air vent ; is shut. Setting the glove box air vent When automatic climate control is activated, the glove box can be ventilated, for instance to cool its contents. The level of airflow depends on the airflow and air distribution settings. ! Close the air vent when heating the : Center air vent, left ; Center air vent, right = Center vent thumbwheel, right ? Center vent thumbwheel, left X To open/close: turn thumbwheels = and ? up or down. vehicle. At high outside temperatures, open the air vent and activate the "cooling with air dehumidification" function. Otherwise, temperature-sensitive items stored in the glove box could be damaged. : Air vent thumbwheel ; Air vent Setting the air vents X 133 To open/close: turn thumbwheel : clockwise or counter-clockwise. Setting the rear-compartment air vents Climate control Setting the center vents in the rear compartment : Rear-compartment air vent thumbwheel ; Rear-compartment air vent, right = Rear control panel for automatic climate control15 ? Rear-compartment air vent, left X To open/close: turn thumbwheel : up or down. 15 Canada only. Z 134 Useful information ............................ Breaking-in notes .............................. Driving ............................................... Automatic transmission ................... Refueling ............................................ Parking ............................................... Driving tips ........................................ Driving systems ................................ 136 136 136 142 150 153 155 159 Driving and parking 135 136 Driving Useful information Driving and parking i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). Breaking-in notes The first 1000 miles (1500 km) The more you look after the engine when it is new, the more satisfied you will be with its performance in the future. RDrive at varying vehicle speeds and engine speeds for the first 1000 miles (1500 km) for this reason. RAvoid overstraining the vehicle during this period, e.g. driving at full throttle. RChange gear in good time, at the latest when the tachometer needle is 2/3 of the way to the red area in the tachometer display. RIf possible, drive in drive program E (in AMG vehicles in drive program C) for the first 1000 miles (1500 km). RDo not manually shift to a lower gear to brake the vehicle. RIf possible, do not depress the accelerator pedal past the point of resistance (kickdown). ROnly select shift ranges 3, 2 or 1 when driving slowly, e.g. in mountainous terrain. After 1000 miles (1500 km), you can increase the engine speed gradually and bring the vehicle up to full speed. Additional breaking-in notes for AMG vehicles: Rdo not drive faster than 85 mph (140 km/h) in the first 1000 miles (1500 km). Ronly allow the engine to reach a maximum engine speed of 4500 rpm briefly. Rchange gear in good time. i You should also observe these notes on running in if the engine or parts of the drive train on your vehicle have been replaced. i Always observe the respective speed restrictions. AMG vehicles with rear axle locking differential Your vehicle is equipped with a self-locking differential on the rear axle. For better protection of the differential on the rear axle, carry out an oil change after a breaking-in phase of 2000 miles (3000 km). This oil change extends the service life of the differential. Have the oil change carried out at a qualified specialist workshop. MercedesBenz recommends that you use an authorized Mercedes-Benz Center for this purpose. Driving Important safety notes G WARNING Make sure absolutely no objects are obstructing the pedals' range of movement. Keep the driver's footwell clear of all obstacles. If there are any floormats or carpets in the footwell, make sure the pedals still have sufficient clearance. During sudden driving or braking maneuvers the objects could get caught between the pedals. You could then no longer brake or accelerate. This could lead to accidents and injury. Driving On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not prevent this type of loss of control. SmartKey positions SmartKey Driving and parking G WARNING G WARNING It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. ! Warm up the engine quickly. Do not use the engine's full performance until it has reached operating temperature. Only shift the automatic transmission to the desired drive position when the vehicle is stationary. Where possible, avoid spinning the drive wheels when pulling away on slippery roads. You could otherwise damage the drive train. ! AMG vehicles: at low engine oil temperatures (below 68 ‡ (+20 †), the maximum engine speed is restricted in order to protect the engine. To protect the engine and maintain smooth engine operation, avoid driving at full throttle when the engine is cold. 137 g To remove the SmartKey Vehicles with automatic transmission: shift the transmission to position P 1 Power supply for some consumers, such as the windshield wipers 2 Ignition (power supply for all consumers) and drive position 3 To start the engine If the SmartKey is in position 0 in the ignition lock for an extended period of time, it can no longer be turned in the ignition lock. The steering is then locked. To unlock, remove the SmartKey and reinsert it into the ignition lock. The steering is locked when you remove the SmartKey from the ignition lock. i The SmartKey can be turned in the ignition lock even if it is not the correct SmartKey for the vehicle. The ignition is not switched on. The engine cannot be started. KEYLESS-GO General information Vehicles with KEYLESS-GO are equipped with a SmartKey featuring an integrated KEYLESSGO function and a detachable Start/Stop button. The Start/Stop button must be inserted into the ignition lock and the SmartKey must be in the vehicle. Z Driving Driving and parking 138 Pressing the Start/Stop button several times in succession corresponds to the different SmartKey positions in the ignition lock. This is only the case if you are not depressing the brake pedal. If you depress the brake pedal and press the Start/Stop button, the engine starts immediately. The Start/Stop button can be removed from the ignition lock. Then, you can insert the SmartKey into the ignition lock. i You do not have to remove the Start/Stop button from the ignition lock when you leave the vehicle. However, you should always take the SmartKey with you when leaving the vehicle. The vehicle can be started with the Start/Stop button if the SmartKey is in the vehicle. Start/Stop button = USA only ? Canada only X Position 0: if Start/Stop button : has not yet been pressed, this corresponds to the SmartKey being removed from the ignition. X Position 1: press Start/Stop button :. You can now activate the windshield wipers, for example. i If you then open the driver's door when in this position, the power supply is deactivated. X Position 2 (ignition): press Start/Stop button : twice. i If you press Start/Stop button : once : Start/Stop button ; Ignition lock X Insert Start/Stop button : into ignition lock ;. i When you insert Start/Stop button : into ignition lock ;, the system requires a detection time of approximately two seconds before you can use Start/Stop button :. when in this position and the driver's door is open, the power supply is deactivated again. As soon as the ignition is switched on, all the indicator lamps in the instrument cluster light up. If an indicator lamp does not go out after the engine is started or if it lights up while the vehicle is in motion, see (Y page 241). Starting the engine Important safety notes G WARNING Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. Driving ! Do not depress the accelerator pedal when starting the engine. i The catalytic converter preheats for up to 30 seconds after a cold start. The sound of the engine may change during this time. Automatic transmission X Shift the transmission to position P. The transmission position display in the multifunction display shows P. i You can also start the engine when the transmission is in position N. Starting procedure with the SmartKey i To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock. X Turn the SmartKey to position 3 in the ignition lock (Y page 137) and release it as soon as the engine is running. Using KEYLESS-GO to start the engine G WARNING As long as the SmartKey is in your vehicle, the vehicle can be started. Therefore, never leave children unattended in the vehicle, as they could otherwise accidentally start the engine. When leaving the vehicle, always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. i The Start/Stop button can be used to start the vehicle without inserting the SmartKey into the ignition lock. The Start/ Stop button must be inserted into the ignition lock and the SmartKey must be in the vehicle. X Depress the brake pedal and keep it depressed. X Press the Start/Stop button (Y page 137) once. The engine starts. Pulling away Automatic transmission G WARNING It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. i It is only possible to shift the transmission from position P to the desired position if you depress the brake pedal. Only then is the selector lever lock released. X Depress the brake pedal and keep it depressed. X Shift the transmission to position D or R. X Release the parking brake (Y page 154). X Release the brake pedal. X Carefully depress the accelerator pedal. ! If a warning tone sounds and the Release Park. Brake message appears in the multifunction display, the parking brake is still applied. Release the parking brake. Z Driving and parking Do not run the engine in confined areas (such as a garage) which are not properly ventilated. If you think that exhaust gas fumes are entering the vehicle while driving, have the cause determined and corrected immediately. If you must drive under these conditions, drive only with at least one window fully open at all times. 139 Driving 140 Driving and parking i The vehicle locks centrally once you have pulled away. The locking knobs in the doors drop down. You can open the doors from the inside at any time. You can also deactivate the automatic locking feature (Y page 208). i Upshifts take place at higher engine speeds after a cold start. This helps the catalytic converter to reach its operating temperature more quickly. Hill start assist Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient. It holds the vehicle for a short time after you have removed your foot from the brake pedal. This gives you enough time to move your foot from the brake pedal to the accelerator pedal and depress it before the vehicle begins to roll. G WARNING Never leave the vehicle when it is held by hill start assist. After approximately one second, hill start assist will no longer brake your vehicle and it could roll away. X Take your foot off the brake pedal. i Once you have taken your foot off the brake pedal, the vehicle is held for around one second. X Pull away. Hill start assist will not function if: Ryou are pulling away on a level road or a downhill gradient. Rthe transmission is in position N. Rthe parking brake is applied. RESP® is malfunctioning. Driving 141 Problem Possible causes/consequences and M Solutions The engine does not start. The starter motor can be heard. RThere is a malfunction in the engine electronics. is a malfunction in the fuel supply. X Before attempting to start the engine again, turn the SmartKey in the ignition back to position 0 or press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster go out. X Try to start the engine again (Y page 138). Avoid excessively long and frequent attempts to start the engine as these will drain the battery. RThere If the engine does not start after several attempts: X Consult a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. The engine does not start. You cannot hear the starter motor. The on-board voltage is too low because the battery is too weak or discharged. X Jump-start the vehicle (Y page 301). If the engine does not start despite attempts to jump-start it: X Consult a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. The starter motor was exposed to a thermal load that was too high. X Allow the starter motor to cool down for approximately two minutes. X Try to start the engine again. If the engine still does not start: X Consult a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Z Driving and parking Problems with the engine Driving and parking 142 Automatic transmission Problem Possible causes/consequences and M Solutions The engine is not running smoothly and is misfiring. There is a malfunction in the engine electronics or a mechanical component of the engine management system. X Only depress the accelerator pedal slightly. X Have the cause rectified immediately at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Otherwise, non-combusted fuel may get into the catalytic converter and damage it. The coolant temperature gauge shows a value above 248 ‡ (120 †). The coolant level is too low. The coolant is too hot and the engine is no longer being cooled sufficiently. X Stop as soon as possible and allow the engine and the coolant to cool down. X Check the coolant level (Y page 280). Observe the warning notes as you do so and add coolant if necessary. Automatic transmission Important safety notes Selector lever Overview of transmission positions G WARNING It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. G WARNING Keep in mind that turning off the engine alone only will shift the automatic transmission into neutral position N automatically. Always shift the automatic transmission into park position P before turning off the engine. Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury. Example: selector lever P Park position with selector lever lock R Reverse gear N Neutral D Drive Automatic transmission Transmission positions B Park position Do not shift the transmission into position P(Y page 153) unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parking lock, you must always apply the parking brake to secure the vehicle. The SmartKey can only be removed if the transmission is in position P. If the SmartKey is removed from the ignition lock, the selector lever is locked. If the vehicle electronics are malfunctioning, the selector lever may be locked in position P. To release the selector lever lock, see "Releasing the parking lock manually" (Y page 149). C Reverse gear Only shift the transmission to R when the vehicle is stationary. : Transmission position display ; Drive program display The current position of the selector lever is shown by the indicators next to the selector lever. The indicators light up when the SmartKey is inserted into the ignition lock. The indicators go out when the SmartKey is removed from the ignition lock. Z Driving and parking Transmission position and drive program display 143 144 Automatic transmission Driving and parking A Neutral Do not shift the transmission to N while driving. The transmission could otherwise be damaged. No power is transmitted from the engine to the drive wheels. Releasing the brakes will allow you to move the vehicle freely, e.g. to push it or tow it. If ESP® is deactivated or faulty: only shift the transmission to position N if the vehicle is in danger of skidding, e.g. on icy roads. Kickdown ! Rolling in neutral N can damage Working on the vehicle the drive train. 7 Drive The automatic transmission changes gear automatically. All forward gears are available. Changing gear The automatic transmission shifts to the individual gears automatically when it is in transmission position D. This automatic gearshifting behavior is determined by: Ra shift range restriction, if selected selected drive program (Y page 144) Rthe position of the accelerator pedal Rthe road speed Use kickdown for maximum acceleration. X Vehicles for USA (except AMG vehicles): fully depress the accelerator pedal. The transmission shifts to a lower gear depending on the engine speed. X Vehicles for Canada and AMG vehicles: depress the accelerator pedal beyond the pressure point. The transmission shifts to a lower gear depending on the engine speed. G WARNING When working on the vehicle, engage the parking brake and shift the automatic transmission into park position P. Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury. Program selector button General information The program selector button allows you to choose between different driving characteristics. Rthe Driving tips AMG vehicles When shifting down, the double-clutch function is active regardless of the currently selected drive program. The double-clutch function reduces load change reactions and is conducive to a sporty driving style. The sound generated by the double-clutch function depends on the drive program selected. Example: program selector button Automatic transmission Comfortable, economical driving S Sport Sporty driving style M Manual Manual gearshifting i For further information on the automatic drive program, see (Y page 146). Only change from automatic drive program E or S to manual drive program M when the vehicle is stationary. X Press program selector button : repeatedly until the letter for the desired gearshift program appears in the multifunction display. i When the engine is started, the automatic transmission always switches to automatic drive program E (drive program C in AMG vehicles). i For further information on the automatic drive program, see (Y page 146). Only change from automatic drive program C, S or S+ to manual drive program M when the vehicle is stationary. X Turn drive program selector : until the desired drive program appears in the multifunction display in the speedometer. The drive program indicator on drive program selector : lights up in red. i The automatic transmission shifts to automatic drive program C each time the engine is started. i RS cannot be selected during normal driving. For further information on RACE START, see (Y page 174). Steering wheel paddle shifters AMG vehicles : Left-hand steering wheel paddle shifter ; Right-hand steering wheel paddle shifter Drive program selector with manual drive program C Controlled Efficiency Comfortable, economical driving S Sport Sporty driving style S+ SportPlus Extremely sporty driving style M Manual Manual gearshifting RS RACE START Optimal vehicle acceleration from a standstill In the automatic drive program, you can restrict or derestrict the shift range by using the steering wheel paddle shifters (Y page 146). In the manual drive program, you can change gear using the steering wheel paddle shifters or the selector lever (Y page 147). i You can only change gear with the steering wheel paddle shifters when the transmission is in position D. Z Driving and parking E Economy 145 146 Automatic transmission Driving and parking Automatic drive program Drive program E (drive program C on AMG vehicles) is characterized by the following: Rcomfort-oriented engine and automatic transmission settings Roptimal fuel consumption resulting from the automatic transmission shifting up sooner Rthe vehicle pulling away more gently in forward and reverse gears, unless the accelerator pedal is depressed fully Rincreased sensitivity. This improves driving stability on slippery road surfaces, for example Rthe automatic transmission shifting up sooner. This results in the vehicle being driven at lower engine speeds and the wheels being less likely to spin Drive program S (drive programs S and S+ on AMG vehicles) is characterized by the following: Rsporty engine and automatic transmission settings Rthe vehicle pulling away in first gear Rthe automatic transmission shifting up later Rthe fuel consumption possibly being higher as a result of the later automatic transmission shift points Shift range = You can use the engine's braking effect. 5 To use the braking effect of the engine on downhill gradients and for driving: Ron steep mountain roads mountainous terrain Rin arduous conditions Rin 4 To use the braking effect of the engine on extremely steep downhill gradients and on long downhill stretches Restricting the shift range X Press the selector lever to the left towards D–. or X Pull the left-hand steering wheel paddle shifter. The automatic transmission shifts down one gear and restricts the shift range to the relevant gear. i If the engine exceeds the maximum engine speed when shifting down, the automatic transmission protects against engine damage by not shifting down. i If the maximum engine speed for the shift range is reached and you continue to accelerate, the automatic transmission shifts up in order to prevent the engine from overrevving, even if the shift range is restricted. Shift ranges Introduction When the automatic transmission is in position D, it is possible to restrict or derestrict the shift range (Y page 146). The shift range selected is shown in the multifunction display. The automatic transmission shifts only as far as the selected gear. Derestricting the shift range X Briefly press the selector lever to the right towards D+. or X Pull the right-hand steering wheel paddle shifter. The shift range is derestricted. Clearing the shift range restriction X X Press and hold the selector lever towards D+ until D is shown once more in the multifunction display. or X Pull and hold the right-hand steering wheel paddle shifter until D is shown again in the multifunction display. The automatic transmission shifts from the current shift range directly to D. Upshifting i Vehicles with the dynamic handling package: if the maximum engine speed for the shift range is reached and you continue to accelerate, the automatic transmission shifts up, except when manual drive program M is selected. Selecting the ideal shift range X Press the selector lever to the left towards D– and hold it in position. or X Pull the left-hand steering wheel paddle shifter and hold it in position. The automatic transmission shifts to the gear which allows optimum acceleration and deceleration. To do this, the automatic transmission shifts down one or more gears. Manual drive program Switching on the manual drive program The manual drive program is only available for vehicles with the dynamic handling package and for AMG vehicles. Manual drive program M is different from drive program S (in AMG vehicles, drive programs S and S+) with regard to spontaneity, responsiveness and smoothness of gear changes. Manual drive program M can be selected using the drive program selector or the program selector button. You can change gears using the steering wheel paddle shifters or the selector lever in manual drive program M if the transmission is in position D. X Press the program selector button (Y page 144) repeatedly until M appears in the multifunction display. AMG vehicles: turn the drive program selector (Y page 145) until M appears in the multifunction display. The indicator M on the drive program selector lights up in red. X Briefly press the selector lever to the right towards D+. or X Pull the right-hand steering wheel paddle shifter (Y page 145). The automatic transmission shifts up to the next gear. Vehicles with AMG engines ! In manual drive program M, the automatic transmission does not shift up automatically even when the engine limiting speed for the current gear is reached. When the engine limiting speed is reached, the fuel supply is cut to prevent the engine from overrevving. Always make sure that the engine speed does not reach the red area of the tachometer. There is otherwise a risk of engine damage. Before the engine speed reaches the red area, an upshift indicator appears in the multifunction display. : Gear indicator ; Upshift indicator Z 147 Driving and parking Automatic transmission Automatic transmission Driving and parking 148 Downshifting Switching off the manual drive program X X Briefly press the selector lever to the left towards D–. or X Pull the left-hand steering wheel paddle shifter (Y page 145). The automatic transmission shifts down to the next gear. i If you brake the vehicle or stop without shifting down, the automatic transmission will shift down to a gear that will allow the vehicle to accelerate or pull away again. i Vehicles with the dynamic handling package: to avoid overrevving the engine when downshifting, the automatic transmission does not shift to a lower gear if this would result in the maximum engine speed being exceeded. i For maximum acceleration, push the selector lever to the left or pull and hold the left-hand steering wheel paddle shifter until the transmission shifts to the optimal gear for the current speed. Kickdown i Vehicles with an AMG engine: it is not possible to use kickdown in manual drive program M. You can also use kickdown for maximum acceleration in manual drive program M. X Vehicles for USA: fully depress the accelerator pedal. The transmission shifts to a lower gear depending on the engine speed. X Vehicles for Canada: depress the accelerator pedal beyond the pressure point. The transmission shifts to a lower gear depending on the engine speed. i During kickdown, you cannot change gear using the steering wheel paddle shifters or the selector lever. Vehicles with the dynamic handling package: press the program selector button (Y page 144). M is no longer shown in the multifunction display. X AMG vehicles: turn the drive program selector (Y page 145) until C, S or S+ appears in the multifunction display. Automatic transmission 149 Problems with the transmission Possible causes/consequences and M Solutions The transmission has The transmission is losing oil. problems shifting gear. X Have the transmission checked at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, immediately. The acceleration ability The transmission is in emergency mode. is deteriorating. It is only possible to shift into second gear and reverse gear. The transmission no X Stop the vehicle. longer changes gear. X Shift the transmission to position P. X Switch off the engine. X Wait at least 10 seconds before restarting the engine. X Shift the transmission to position D or R. If D is selected, the transmission shifts into second gear; if R is selected, the transmission shifts into reverse gear. X Have the transmission checked at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, immediately. Releasing the parking lock manually In the event of an electrical malfunction, it is possible to release the selector lever lock manually to move it out of position P, e.g. if you wish to tow the vehicle away. X Apply the parking brake. Pry off selector lever gaiter : with a flat, blunt object, (e.g. a screwdriver wrapped in cloth) from the right-hand edge, pulling it up and out. X Press release buttons ; down and simultaneously move the selector lever out of position P. The selector lever can now be moved freely until it is returned to position P. X Transfer case ! Do not use any sharp-edged objects to remove the selector lever gaiter from the center console. This could damage the selector lever gaiter. This section is only valid for vehicles with 4wheel drive (4MATIC). Power is always transmitted to both axles. ! Performance tests may only be carried out on a 2-axle dynamometer. The brake system or transfer case could otherwise be damaged. Contact a qualified specialist workshop for a performance test. Mercedes-Benz recommends that you use Z Driving and parking Problem 150 Refueling an authorized Mercedes-Benz Center for this purpose. Driving and parking ! If the parking brake is being tested on a brake dynamometer, the ignition must be switched off (SmartKey or Start/Stop button in position 0 or 1), as ESP® will otherwise automatically intervene. The brake system could otherwise be damaged. Refueling Important safety notes G WARNING Gasoline is highly flammable and poisonous. It burns violently and can cause serious personal injury. Never allow sparks, flames or smoking materials near gasoline. Turn off the engine before refueling. Whenever you are around gasoline, avoid inhaling fumes and any skin or clothing contact. Direct skin contact with fuels and the inhalation of fuel vapors are damaging to your health. G WARNING Overfilling of the fuel tank may create pressure in the system which could cause a gas discharge. This could cause the gasoline to spray back out when removing the fuel pump nozzle, which could cause personal injury. G WARNING C 300 and C 300 Sport with automatic transmission: Flexible fuel vehicle (with Ethanol up to E85! sticker on the fuel filler flap): Ethanol fuel (E85) and its vapors are highly flammable, poisonous and fast burning. Ethanol fuel can cause serious injury if ignited, or if you come into contact with it or inhale its vapors. Avoid inhaling ethanol vapors. Avoid skin contact with ethanol. Extinguish any naked flames before refueling. Never allow sparks or smoking materials near ethanol. ! Do not use diesel to refuel vehicles with a gasoline engine. Even small amounts of the wrong fuel result in damage to the fuel system and engine. ! Do not switch on the ignition if you accidentally refuel with the wrong fuel. Otherwise, the fuel will enter the fuel lines. Notify a qualified specialist workshop and have the fuel tank and fuel lines drained completely. Gasoline Fuel grade ! You should only refuel with premiumgrade unleaded gasoline, as this avoids damaging the catalytic converter. Flexible fuel vehicles, identifiable from the label inside the fuel filler flap, can be refueled with E85. For further information on flexible fuel, see "Fuel". If engine running problems are apparent, have the cause checked immediately and repaired. Excess unburned fuel can otherwise enter the catalytic converter, leading to overheating and possibly causing a fire. ! Use a filter when refueling from a fuel can. Otherwise, the fuel lines and/or injection system could be blocked by particles from the fuel can. i Only refuel with premium-grade unleaded gasoline with a specified minimum octane number of 91 (average value of 96 RON/ 86 MON). You will usually find information about the fuel grade on the pump. If you cannot find the label on the pump, ask the staff for assistance. C 300 and C 300 Sport with automatic transmission: you can tell a flexible fuel vehicle by the label inside the fuel filler flap. You can find more information under "Fuel" (Y page 347), or by contacting an authorized Mercedes-Benz Service Center or visiting http://www.mbusa.com (USA only). Refueling Fuel filler flap The fuel filler flap is unlocked or locked automatically when you open or close the vehicle with the SmartKey or using KEYLESSGO. The position of the fuel filler cap is displayed in the instrument cluster 8. The arrow next to the filling pump indicates the side of the vehicle. SmartKey. The driver’s door can be closed again. X Press the fuel filler flap in the direction of arrow :. The fuel filler flap opens slightly. X Open the fuel filler flap. X Turn the fuel filler cap counter-clockwise and remove it. X Insert the fuel filler cap into the holder bracket on the inside of filler flap ;. X Completely insert the pump nozzle into the filler neck and refuel. X Only fill the tank until the pump nozzle switches off. ! Overfilling the fuel tank could damage the fuel system. Closing X Replace the fuel filler cap and turn it clockwise. The fuel filler cap audibly engages. X Close the fuel filler flap. i If you drive with the fuel filler cap open, : To open the fuel filler flap reserve fuel warning lamp 8 flashes. In addition, the ; Check Engine warning lamp may light up. A message appears in the multifunction display (Y page 228). For further information on warning and indicator lamps in the instrument cluster, see (Y page 246). ; To insert the fuel filler cap i Close the fuel filler flap before locking the = Tire pressure table ? Fuel type vehicle. A locking pin otherwise prevents the fuel filler flap from closing after the vehicle has been locked. Opening X Switch off the engine. Fuel filler flap emergency release X Remove the SmartKey from the ignition lock. KEYLESS-GO: open the driver’s door. This switches the ignition to position 0, which corresponds to having removed the G WARNING Avoid contact with the vehicle walls as they may contain sharp edges. Otherwise, you could injure yourself while releasing the fuel filler flap. Z 151 Driving and parking Refueling Refueling Driving and parking 152 The emergency release is located in the trunk behind the side trim on the right-hand side, when viewed in the direction of travel. X Open the trunk lid. X Open the right-hand side trim panel (Y page 306). X Pull emergency release : in the direction of the arrow. The fuel filler flap is unlocked. X Open the fuel filler flap. Parking 153 The fuel line or the fuel tank is defective. X Turn the SmartKey to position 0(Y page 137) in the ignition lock immediately and remove it. X Do not restart the engine under any circumstances. X Consult a qualified specialist workshop. Driving and parking Problems with fuel and the fuel tank Problem Fuel is leaking from the vehicle. The fuel filler flap cannot be opened. Possible causes/consequences and M Solutions G Risk of explosion or fire The fuel filler flap is not unlocked. or The SmartKey battery is discharged. X Unlock the vehicle using the mechanical key (Y page 73). X Open the trunk lid. X Manually unlock the fuel filler flap using the emergency release (Y page 151). The fuel filler flap is unlocked, but the opening mechanism is jammed. X Consult a qualified specialist workshop. Parking Important safety notes G WARNING Do not park this vehicle in areas where combustible materials can come into contact with the hot exhaust system. Do not park the vehicle on dry grassland or harvested grain fields. Combustible materials, such as grass, hay or leaves could be ignited by the hot exhaust system and cause a vehicle fire. Unintended vehicle movement can cause serious personal injury or damage to the vehicle or the vehicle drivetrain. To reduce such risks, always do the following before turning off the engine and leaving the vehicle: Rkeep your right foot on the brake pedal. Rengage the parking brake. Rshift the automatic transmission to park position P. Rslowly release the brake pedal. Rwhen parked on an incline, always turn the front wheels towards the road curb. the SmartKey in the ignition lock to position 0 and remove the SmartKey from the ignition lock, or press the KEYLESS-GO Start/Stop button. Rtake the SmartKey with you and lock the vehicle when leaving. Rturn Switching off the engine Important safety notes G WARNING Do not turn off the engine before the vehicle has come to a complete stop. With the engine not running, there is no power assistance for the brake and steering systems. In this case, it is important to keep in mind that a Z Parking 154 considerably higher degree of effort is necessary to brake and steer the vehicle. Driving and parking Vehicles with automatic transmission X X release the parking brake and/or shift the automatic transmission out of park position P, either of which could result in an accident and/or serious personal injury. Apply the parking brake firmly. Shift the transmission to position P. Using the SmartKey X Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated. i The SmartKey can only be removed if the transmission is in position P. Using KEYLESS-GO X Press the Start/Stop button (Y page 137). The engine stops and all the indicator lamps in the instrument cluster go out. i When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed". If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone. X To apply: depress parking brake ; firmly. When the engine is running, the $ (USA only) or J (Canada only) indicator lamp lights up in the instrument cluster. X To release: depress the brake pedal and keep it depressed. X Pull release handle :. When the ignition is switched on or the engine is running, the $ (USA only) or J (Canada only) indicator lamp goes out in the instrument cluster. Parking the vehicle for a long period Parking brake G WARNING Engaging the parking brake while the vehicle is in motion can cause the rear wheels to lock up. You could lose control of the vehicle and cause an accident. In addition, the vehicle's brake lights do not light up when the parking brake is engaged. G WARNING When leaving the vehicle, always remove the SmartKey from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could If you leave the vehicle parked for longer than four weeks, the battery may be damaged by exhaustive discharge. X Connect a trickle charger. i You can obtain information about trickle chargers from a qualified specialist workshop, e.g. an authorized MercedesBenz Center. If you leave the vehicle parked for longer than six weeks, the vehicle may suffer damage as a result of lack of use. X Visit a qualified specialist workshop and seek advice. Driving tips General driving tips Important safety notes G WARNING Always remember that you must concentrate primarily on driving the vehicle. The driver's concentration must always be directed primarily at road traffic. For your own safety and that of others, we recommend that you stop the vehicle at a safe place and in accordance with the traffic conditions before making or accepting a phone call. Comply with all legal requirements if you use the telephone while driving. Use the handsfree system and only use the telephone when road, weather and traffic conditions permit. In some jurisdictions, it is forbidden for drivers to use mobile phones while driving. Only operate the audio system or COMAND (Cockpit Management and Data System) in compliance with all legal requirements and when the road, weather and traffic conditions permit. You may otherwise not be able to observe the traffic conditions, endangering yourself and others. Remember that your vehicle covers a distance of 44 feet (approximately 14 m) a second when it is traveling at only 30 mph (approximately 50 km/h). Drive sensibly – save fuel Observe the following tips to save fuel: X The tires should always be inflated to the recommended tire pressure. X Remove unnecessary loads. X Remove roof racks when they are not needed. X Warm up the engine at low engine speeds. X Avoid frequent acceleration or braking. X Have all maintenance work carried out as indicated by the service intervals in the Service Booklet or by the service interval display. Fuel consumption also increases when driving in cold weather, in stop-and-go traffic and in mountainous terrain. Drinking and driving G WARNING Drinking and driving and/or taking drugs and driving are very dangerous combinations. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgment. The possibility of a serious or even fatal accident are greatly increased when you drink or take drugs and drive. Do not drink or take drugs and drive or allow anyone to drive who has been drinking or taking drugs. Pedals G WARNING Make sure absolutely no objects are obstructing the pedals' range of movement. Keep the driver's footwell clear of all obstacles. If there are any floormats or carpets in the footwell, make sure that the pedals still have sufficient clearance. During sudden driving or braking maneuvers, the objects could get caught between the pedals. You could then no longer brake or accelerate. This could lead to accidents and injury. Rolling with the engine switched off G WARNING There is no power assistance for the steering and the brake when the engine is not running. Steering and braking requires significantly more effort and you could lose control of the vehicle and cause an accident as a result. Do not turn off the engine while the vehicle is in motion. Z Driving and parking Driving tips 155 156 Driving tips Exhaust check Driving and parking G WARNING Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. Do not run the engine in confined areas (such as a garage) which are not properly ventilated. If you think that exhaust gas fumes are entering the vehicle while driving, have the cause determined and corrected immediately. If you must drive under these conditions, drive only with at least one window fully open at all times. Certain engine systems are designed to keep the level of poisonous components in exhaust fumes within legal limits. These systems only work at peak efficiency when they are maintained exactly in accordance with the manufacturer's specifications. For this reason, all work on the engine must be carried out only by qualified and authorized Mercedes-Benz technicians. The engine settings must not be changed in any circumstances. Furthermore, all specific service work must be carried out at regular intervals and in accordance with the Mercedes-Benz service requirements. Details can be found in the Service Booklet. Brakes Downhill gradients ! On long and steep gradients, you must reduce the load on the brakes by shifting early to a lower gear. This allows you to take advantage of the engine braking effect and helps avoid overheating and excessive wear of the brakes. When you take advantage of the engine braking effect, a drive wheel may not turn for some time, e.g. on a slippery road surface. This could cause damage to the drive train. This type of damage is not covered by the Mercedes-Benz warranty. Heavy and light loads G WARNING Depressing the brake pedal constantly results in excessive and premature wear to the brake pads. It may also cause the brakes to overheat, seriously impairing their effectiveness. It may then not be possible to stop the vehicle in sufficient time to avoid an accident. If the brakes have been subjected to a heavy load, do not stop the vehicle immediately, but drive on for a short while. This allows the airflow to cool the brakes more quickly. Wet roads G WARNING G WARNING After driving in heavy rain for some time without applying the brakes or through water deep enough to wet brake components, the first braking action may be somewhat reduced. You have to depress the brake pedal more firmly. Maintain a safe distance from vehicles in front. G WARNING After driving on a wet road or having the vehicle washed, brake firmly while paying attention to the traffic conditions. This will warm up the brake discs, thereby drying them more quickly and protecting them against corrosion. Important safety notes On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not prevent this type of loss of control. Make sure that you do not endanger other road users when you apply the brakes. Driving tips G WARNING The layer of salt on the brake discs and the brake pads/linings may cause a delay in the braking effect, resulting in a significantly longer braking distance, which could lead to an accident. To avoid this danger, you should: Roccasionally brake carefully, without putting other road users at risk, when you are driving on salted roads. This helps to remove any salt that may have started to build up on the brake discs and the brake pads/linings. Rmaintain a greater distance to the vehicle ahead and drive with particular care. Rcarefully apply the brakes at the end of a trip and immediately after commencing a new trip, so that salt residues are removed from the brake discs. Servicing the brakes ! If the red brake warning lamp lights up in the instrument cluster and you hear a warning tone while the engine is running, the brake fluid level may be too low. Observe additional warning messages in the multifunction display. The brake fluid level may be too low due to brake pad wear or leaking brake lines. Have the brake system checked immediately. This work should be carried out at an authorized Mercedes-Benz Center. All checks and maintenance work on the brake system must be carried out at a qualified specialist workshop. This work should be carried out at an authorized Mercedes-Benz Center. Have the brake pads replaced and the brake fluid renewed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. G WARNING If brake pads or brake fluid other than those recommended are used, the braking properties of the vehicle can be degraded to an extent that safe braking is substantially impaired. This could result in an accident. ! Vehicles with 4MATIC: function or performance tests may only be carried out on a 2-axle dynamometer. If you are planning to have the vehicle tested on such a dynamometer, contact an authorized Mercedes-Benz Center to obtain further information first. Otherwise, you could damage the drive train or the brake system. ! Vehicles with 4MATIC: as the ESP® system operates automatically, the engine and the ignition must be switched off (SmartKey in position 0 or 1 in the ignition lock or Start/Stop button in position 0 or 1) while the parking brake is being tested on a brake dynamometer. Braking maneuvers triggered automatically by ESP® may seriously damage the brake system. ! Vehicles with 4MATIC: as the ESP® system operates automatically, the engine and the ignition system must be switched off (SmartKey in position 0 or 1 in the ignition lock or Start/Stop button in position 0 or 1) when: Rtesting the parking brake on a brake dynamometer. Ryou intend to have the vehicle towed with the front axle raised. Braking maneuvers triggered automatically by ESP® may seriously damage the brake system. If your brake system is subject only to moderate loads, you should test the functionality of your brakes at regular intervals by pressing firmly on the brake pedal at high speeds. This improves the grip of the brake pads. Z Driving and parking Limited braking performance on salttreated roads 157 158 Driving tips G WARNING Driving and parking Make sure that you do not endanger other road users when you apply the brakes. You can find a description of Brake Assist (BAS) on (Y page 59) or of BAS PLUS on (Y page 60). High-performance brake system for AMG vehicles The high-performance brake system is installed only on the C 63 AMG. G WARNING New vehicle brake pads and discs, and replacement brake pads and discs may take several hundred miles of driving until they provide optimum braking efficiency. Until that time, you may need to use increased brake pedal pressure while braking. Please be aware of this and adjust your driving and braking accordingly during this break-in period. Excessive high-demand braking will cause correspondingly high brake wear. Please be attentive to the brake warning lamp in the instrument cluster and brake condition messages in the multifunction display. Especially for high performance driving, it is important to maintain and have the brake system checked regularly. The high-performance brake system is designed for heavy loads. This may lead to noise when braking. This will depend on: Rspeed Rbraking force Renvironmental conditions, such as temperature and humidity The wear of individual components of the brake system, such as the brake pads/linings or brake discs, depends on the individual driving style and operating conditions. For this reason, it is impossible to state a mileage that will be valid under all circumstances. An aggressive driving style will lead to high wear. You can obtain further information about this from your authorized Mercedes-Benz Center. Driving on wet roads Hydroplaning If water has accumulated to a certain depth on the road surface, there is a danger of hydroplaning occurring, even if: Ryou drive at low speeds. tires have adequate tread depth. For this reason, in the event of heavy rain or in conditions in which hydroplaning can occur you must drive in the following manner: Rthe Rreduce your speed ruts Rbrake carefully Ravoid Driving on flooded roads ! Do not drive through flooded areas. Check the depth of any water before driving through it. Drive slowly through standing water. Otherwise, water may enter the vehicle interior or the engine compartment. This can damage the electronic components in the engine or the automatic transmission. Water can also be drawn in by the engine's air suction nozzles and this can cause engine damage. Winter driving General notes G WARNING If the vehicle becomes trapped in snow, ensure that snow is kept away from the exhaust pipe and from around the vehicle as long as the engine is running. Otherwise, poisonous carbon monoxide (CO) may enter the vehicle, resulting in loss of consciousness and even death. Driving systems At the onset of winter, have your vehicle winterproofed at a qualified specialist workshop, e.g. at an authorized MercedesBenz Center. Observe the notes in the "Winter operation" section (Y page 312). Driving with summer tires Observe the notes in the "Winter operation" section (Y page 312). Slippery road surfaces G WARNING The outside temperature indicator is not designed to serve as an ice-warning device and is therefore unsuitable for that purpose. Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may still be icy, especially in wooded areas or on bridges. G WARNING On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not prevent this type of loss of control. Drive particularly carefully on slippery road surfaces. Avoid sudden acceleration, steering and braking maneuvers. Do not use cruise control or DISTRONIC PLUS. If the vehicle threatens to skid or cannot be stopped when moving at low speed: X Shift the transmission to position N. i For more information on driving with snow chains, see (Y page 313). G WARNING Driving systems Cruise control Important safety notes Cruise control maintains a constant road speed for you. It brakes automatically in order to avoid exceeding the set speed. On long and steep downhill gradients, especially if the vehicle is laden, you must select shift range 1, 2 or 3 in good time. By doing so, you will make use of the braking effect of the engine, which relieves the load on the brake system and prevents the brakes from overheating and wearing too quickly. Use cruise control only if road and traffic conditions make it appropriate to maintain a steady speed for a prolonged period. You can set any road speed above 20 mph (30 km/h). G WARNING The cruise control is a convenience system designed to assist the driver during vehicle operation. The driver is and must always remain responsible for the vehicle's speed and for safe brake operation. Only use the cruise control if the road, traffic, and weather conditions make it advisable to travel at a constant speed. RThe use of the cruise control can be dangerous on winding roads or in heavy traffic because conditions do not allow safe driving at a constant speed. RThe use of the cruise control can be dangerous on slippery roads. Rapid changes in tire traction can result in wheel spin and loss of control. RDeactivate the cruise control when driving in fog. The "Resume" function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed. Make sure that you do not endanger other road users when you apply the brakes. Z Driving and parking To assure sufficient fresh air ventilation, open a window slightly on the side of the vehicle not facing the wind. 159 160 Driving systems G WARNING Driving and parking The cruise control brakes automatically so that the set speed is not exceeded. Cruise control lever stored speed on downhill gradients by automatically applying the brakes. Storing the current speed or calling up the last stored speed G WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others. X : To switch on or to increase the speed ; To switch on or to reduce the speed = To deactivate cruise control ? To switch on with the current speed or with the last stored speed When you activate cruise control, the stored speed is shown in the multifunction display for five seconds. In the multifunction display, the segments between the stored speed and the maximum speed light up. Storing and maintaining the current speed You can store the current speed if you are driving faster than 20 mph (30 km/h). X Accelerate the vehicle to the desired speed. X Briefly press the cruise control lever up : or down ;. X Remove your foot from the accelerator pedal. Cruise control is activated. The vehicle automatically maintains the stored speed. i Cruise control may be unable to maintain the stored speed on uphill gradients. The stored speed is resumed when the gradient evens out. Cruise control maintains the Briefly pull the cruise control lever towards you ?. X Remove your foot from the accelerator pedal. The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed. Setting a speed G WARNING Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/ or serious injury to you and others. X Press the cruise control lever up : for a higher speed or down ; for a lower speed. X Keep the cruise control lever pressed until the desired speed is reached. X Release the cruise control lever. The new speed is stored. i Cruise control is not deactivated if you depress the accelerator pedal. For example, if you accelerate briefly to Driving systems Making adjustments in 1 mph (Canada: 1 km/h) increments X Briefly press the cruise control lever to the pressure point, up : for a higher speed or down ; for a lower speed. The last speed stored is increased or reduced. Making adjustments in 5 mph (Canada: 10 km/h) increments X Briefly press the cruise control lever beyond the pressure point, up : for a higher speed or down ; for a lower speed. The last speed stored is increased or reduced. Deactivating cruise control There are several ways to deactivate cruise control: X Briefly press the cruise control lever forwards =. or X Brake. Cruise control is automatically deactivated if: Ryou depress the parking brake. are driving below 20 mph (30 km/h). RESP® intervenes or you deactivate ESP®. Ryou shift the transmission to position N while driving. If cruise control is deactivated, you will hear a warning tone. You will see the Cruise Control Off message in the multifunction display for approximately five seconds. Ryou i The last speed stored is cleared when you switch off the engine. DISTRONIC PLUS Important safety notes DISTRONIC PLUS regulates the speed and automatically helps you maintain the distance to the vehicle detected in front. It brakes automatically in order to avoid exceeding the set speed. On long and steep downhill gradients, especially if the vehicle is laden, you must select shift range 1, 2 or 3 in good time. By doing so, you will make use of the braking effect of the engine, which relieves the load on the brake system and prevents the brakes from overheating and wearing too quickly. If a slower-moving vehicle is detected in front, DISTRONIC PLUS causes your vehicle to brake and maintain the preset distance to the vehicle in front. G WARNING The DISTRONIC PLUS requires familiarity with its operational characteristics. We strongly recommend that you review the following information carefully before operating the system. G WARNING The DISTRONIC PLUS is a convenience system. Its speed adjustment reduction capability is intended to make cruise control more effective and usable when traffic speeds vary. It is not however, intended to, nor does it, replace the need for extreme care. The responsibility for the vehicle's speed, distance to the preceding vehicle and, most importantly, brake operation to ensure a safe stopping distance, always remains with the driver. The DISTRONIC PLUS cannot take street and traffic conditions into account. Complex driving situations are not always fully recognized by the DISTRONIC PLUS. This could result in wrong or missing distance warnings. Z Driving and parking overtake, cruise control adjusts the vehicle's speed to the last speed stored after you have finished overtaking. 161 Driving and parking 162 Driving systems If you want DISTRONIC PLUS to assist you, the radar sensor system must be activated (Y page 208) and operational. If there is no vehicle driving in front of you, DISTRONIC PLUS functions like cruise control at a speed range between 20 mph (Canada: 30 km/h) and 120 mph (Canada: 200 km/h). If a vehicle is driving in front of you, it functions at a speed range between 0 mph (0 km/h) and 120 mph (Canada: 200 km/h). Do not use DISTRONIC PLUS while driving on roads with steep gradients. As DISTRONIC PLUS transmits radar waves, it can resemble the radar detectors of the responsible authorities. You can refer to the applicable section in the Operator's Manual if there are any questions concerning this. i USA only: This device has been approved by the FCC as a “Vehicular Radar System”. The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user’s authority to operate the equipment. i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Removal, tampering, or altering of the device will void any warranties, and is not permitted. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user’s authority to operate the equipment. G WARNING The DISTRONIC PLUS adaptive cruise control is not a substitute for active driving involvement. It does not react to pedestrians or on stationary objects, nor does it recognize or predict the curvature and lane layout or the movement of preceding vehicles. The DISTRONIC PLUS can only apply a maximum of 40% of the vehicle's braking power. The DISTRONIC PLUS may not detect narrow vehicles possibly driving in front of you, such as motorcycles and vehicles driving in an offset formation. It is the driver's responsibility at all times to be attentive to the road, weather and traffic conditions. Additionally, the driver must provide the steering, braking and other driving inputs necessary to remain in control of the vehicle. High-frequency sources such as toll stations, speed measuring systems etc. can cause the DISTRONIC PLUS system to temporarily cease functioning. G WARNING The DISTRONIC PLUS cannot take road and traffic conditions into account. Only use the DISTRONIC PLUS if the road, weather and traffic conditions make it advisable to travel at a constant speed. G WARNING Use of the DISTRONIC PLUS can be dangerous on slippery roads. Rapid changes in tire traction can result in wheel spin and loss of control. The DISTRONIC PLUS does not function in adverse sight and distance conditions. Do not use the DISTRONIC PLUS during conditions of fog, heavy rain, snow or sleet. Driving systems The DISTRONIC PLUS cannot take weather conditions into account. Switch off the DISTRONIC PLUS or do not switch it on if: Rroads are slippery or covered with snow or ice. The wheels could lose traction while braking or accelerating, and the vehicle could skid. Rthe DISTRONIC PLUS system sensor covers are dirty or visibility is diminished due to snow, rain or fog, for example. The distance control system functionality could be impaired. Always pay attention to surrounding traffic conditions even while the DISTRONIC PLUS is switched on. Otherwise, you may not be able to recognize dangerous situations until it is too late. This could cause an accident in which you and/or others could be injured. G WARNING The "Resume" function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed. G WARNING Your undivided attention to street and traffic conditions is necessary at all times whether DISTRONIC PLUS is active or not. The use of DISTRONIC PLUS can be dangerous on winding roads or in heavy traffic because conditions do not allow safe driving at a constant speed. DISTRONIC PLUS does not react to stationary objects on the road (for example, a vehicle stopped in traffic or an abandoned vehicle). DISTRONIC PLUS likewise does not react to oncoming vehicles. Deactivate DISTRONIC PLUS: Rwhen changing to the right lane, if the vehicles in the left lane are driving slower Rwhen driving into a filter lane or an expressway exit Rin complex driving situations, for example in construction sites on an expressway In these situations DISTRONIC PLUS will maintain the set speed if it is not deactivated. DISTRONIC PLUS is intended only for maintaining a set speed and a set distance from the objects moving in front of the vehicle. G WARNING An intermittent warning sounds and the distance warning lamp · in the instrument cluster is illuminated if the DISTRONIC PLUS system calculates that the distance to the vehicle ahead and your vehicle's current speed indicate that the DISTRONIC PLUS will not be capable of slowing the vehicle sufficiently to maintain the preset following distance, which creates a danger of a collision. Immediately brake the vehicle to increase your distance to the preceding vehicle. The warning sound is intended as a final caution in which you should intercede with your own braking inputs to avoid a potentially dangerous situation. Do not wait for the operation of the warning signal to intercede with your own braking. This will result in potentially dangerous emergency braking which will not always result in an impact being avoided. Tailgating increases the risk of an accident. G WARNING DISTRONIC PLUS brakes your vehicle with a maximum deceleration of 13 ft/s2(4 m/s2). This is equivalent to approximately 40 % of your vehicle's maximum possible deceleration. Z Driving and parking G WARNING 163 164 Driving systems Driving and parking You need to brake yourself to prevent a collision. DISTRONIC PLUS brakes the vehicle to restore the set distance from the vehicle ahead or the set speed. G WARNING If you do not receive visual or acoustic warning signals during a critical traffic situation, DISTRONIC PLUS has either not recognized the collision risk, has been deactivated or is malfunctioning. Remember, whether or not DISTRONIC PLUS is operating, it is ultimately always the drivers responsibility to apply the brakes in order to control the vehicle and avoid a collision. Cruise control lever : To store the current speed or a higher speed ; To store the current speed or a lower speed = To deactivate DISTRONIC PLUS ? To store the current speed or to call up the last stored speed A To set the specified minimum distance Switching on DISTRONIC PLUS, storing the current speed and maintaining it Important safety notes G WARNING The vehicle can be braked when DISTRONIC PLUS is activated. For this reason, deactivate DISTRONIC PLUS if the vehicle is to be set in motion by other means (e.g. in a car wash or by towing). In order to activate DISTRONIC PLUS, the following conditions must be fulfilled: Rthe engine must be started. It may take up to two minutes after pulling away before DISTRONIC PLUS is operational. Rthe parking brake must not be applied. RESP® must be activated but not intervening. Rthe transmission must be in position D. Rthe hood must be closed. Rthe driver's door must be closed when you shift from P to D or your seat belt must be fastened. Rthe front-passenger door and rear doors must be closed. Rthe vehicle must not skid. Activating while driving When driving at speeds below 20 mph (30 km/h), you can only activate DISTRONIC PLUS if the vehicle in front has been detected and is shown in the multifunction display. If the vehicle in front is no longer detected and shown, DISTRONIC PLUS is deactivated and a warning tone sounds. X Briefly pull the cruise control lever towards you ?, or briefly press up : or down ;. DISTRONIC PLUS is selected. X Keep the cruise control lever pressed up : or down ; until the desired speed is set. X Remove your foot from the accelerator pedal. Your vehicle adapts its speed to that of the vehicle in front, but only up to the desired stored speed. i If you do not fully release the accelerator pedal, the DISTRONIC PLUS Override message is shown in the multifunction display. The set distance to a slowermoving vehicle in front will then not be maintained. You will be driving at the speed Driving systems Activating when driving towards a stationary vehicle If the vehicle in front of you is stationary, you can only activate DISTRONIC PLUS once your vehicle is stationary as well. X Briefly pull the cruise control lever towards you ?, or briefly press up : or down ;. DISTRONIC PLUS is selected. i DISTRONIC PLUS can only be activated at under 20 mph (30 km/h) if a vehicle in front has been detected. Therefore, the DISTRONIC PLUS distance display in the instrument cluster should be activated (Y page 204). X Keep the cruise control lever pressed up : or down ; until the desired speed is set. i You can use the cruise control lever to set the stored speed and the control on the cruise control lever to set the specified minimum distance (Y page 168). Pulling away X If the vehicle in front pulls away: remove your foot from the brake pedal. X Briefly pull the cruise control lever towards you ?. or X Accelerate briefly. Your vehicle pulls away and adapts its speed to that of the vehicle in front. Driving If there is no vehicle in front, DISTRONIC PLUS operates in the same way as cruise control. If a slower-moving vehicle is detected in front, DISTRONIC causes your vehicle to brake. This maintains the preset distance to the vehicle in front. If DISTRONIC PLUS detects a faster-moving vehicle in front, it increases the driving speed of your vehicle, but only up to the desired speed you have stored. G WARNING If you depress the brake, DISTRONIC PLUS is deactivated unless your vehicle is stationary. DISTRONIC PLUS then no longer brakes your vehicle. In such cases, control the distance from vehicles travelling in front with the brake alone. You could otherwise cause an accident and thereby injure yourself and others. The driver remains fully responsible for the vehicle's distance from other vehicles, the speed being driven and for braking in good time. Changing lanes If you wish to change to the passing lane (in left-hand-drive vehicles, the passing lane is the left-hand lane), DISTRONIC PLUS supports you if: Ryou are driving faster than 40 mph (60 km/h). RDISTRONIC PLUS is maintaining the distance to a vehicle in front. Ryou switch on the appropriate turn signals. RDISTRONIC PLUS does not detect a danger of collision. If these conditions are met, your vehicle is accelerated. Acceleration will be interrupted if changing lanes takes too long or if the distance between your vehicle and the vehicle in front becomes too small. G WARNING DISTRONIC PLUS and Active Blind Spot Assist are only aids designed to assist driving. They do not relieve you of the responsibility of paying attention. The driver remains fully responsible for the vehicle's distance from other vehicles, the vehicle's speed and for braking in good time. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. Z Driving and parking you determine by the position of the accelerator pedal. 165 166 Driving systems Driving and parking Vehicles with COMAND i The following function is not operational in all countries. DISTRONIC PLUS uses additional information from your navigation system so that it can react appropriately to certain traffic situations. This is the case if, while following a vehicle, DISTRONIC PLUS is active and you: DISTRONIC PLUS must also never be operated, activated or deactivated by a passenger or from outside the vehicle. DISTRONIC PLUS does not replace the parking brake and must not be used for parking. The DISTRONIC PLUS braking effect is canceled and the vehicle can start moving if: Rapproach RDISTRONIC or drive through a traffic circle a T intersection Rturn off at a freeway exit Even if the vehicle in front leaves the detection range, DISTRONIC PLUS temporarily maintains the current driving speed and does not accelerate. This is based on the current map data in the navigation system. Rapproach Example: traffic circle The current speed is maintained: Rapproximately 10 seconds before the traffic circle/T intersection and for approximately 1.5 seconds when driving on the traffic circle Rapproximately 12 seconds before reaching a freeway exit and approximately 4 seconds after the freeway exit Afterwards, the vehicle accelerates back to the set speed you specified. Stopping G WARNING Never get out of the vehicle when DISTRONIC PLUS is activated. PLUS is deactivated using the cruise control lever. Ryou accelerate. Rthere is a malfunction in the system or an interruption in the power supply, e.g. battery failure. Rthe electrical system in the engine compartment, the battery or the fuses are tampered with. Rthe battery is disconnected. If you wish to leave the vehicle or park it, deactivate DISTRONIC PLUS and secure the vehicle against rolling away. If DISTRONIC PLUS detects that the vehicle in front is stopping, it brakes your vehicle until it is stationary. Once your vehicle is stationary, it remains stationary and you do not need to depress the brake. i Depending on the specified minimum distance, your vehicle will come to a standstill at a sufficient distance behind the vehicle in front. The specified minimum distance is set using the control on the cruise control lever. You will see a warning message in the multifunction display if DISTRONIC PLUS is activated and: Rthe driver's door is open and the driver's seat belt is unfastened. Rthe engine is switched off. Rthe hood is opened. Shift to 'P' Driving systems Move the selector lever to P to prevent the vehicle from rolling away. DISTRONIC PLUS is deactivated. The warning message in the multifunction display disappears. The horn will also sound at regular intervals if DISTRONIC PLUS is activated and you: Rswitch the engine off, open the driver's door and take off your seat belt Ropen the hood The sounding of the horn alerts you to the fact that the vehicle has been parked while DISTRONIC PLUS is still activated. The sound becomes louder if you attempt to lock the vehicle. The vehicle is not locked until DISTRONIC PLUS is deactivated. X Press the cruise control lever up : for a higher speed or down ; for a lower speed. X Keep the cruise control lever pressed until the desired speed is reached. X Release the cruise control lever. The new speed is stored. DISTRONIC PLUS is activated and adjusts the vehicle's speed to the new speed stored. Making adjustments in 1 mph (Canada: 1 km/h) increments X Briefly press the cruise control lever to the pressure point, up : for a higher speed or down ; for a lower speed. The last speed stored is increased or reduced. i If the engine has been switched off, it cannot be started again until DISTRONIC PLUS has been deactivated. If DISTRONIC PLUS is activated and a malfunction occurs in the system or if there is a disruption in the power supply, the Brake Immediately message is shown in the multifunction display. Immediately depress the brake firmly until the warning message in the multifunction display goes out or shift the transmission to position P. DISTRONIC PLUS is then deactivated. Setting a speed G WARNING Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/ or serious injury to you and others. Making adjustments in 5 mph (Canada: 10 km/h) increments X Briefly press the cruise control lever beyond the pressure point, up : for a higher speed or down ; for a lower speed. The last speed stored is increased or reduced. Storing the current speed or calling up a stored speed G WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others. X Briefly pull the cruise control lever towards you ?. X Remove your foot from the accelerator pedal. DISTRONIC PLUS is activated. The first time it is activated, the current speed is stored. Otherwise, it sets the vehicle cruise speed to the previously stored value. Z Driving and parking X 167 Driving systems 168 Driving and parking Setting the specified minimum distance You can set the specified minimum distance for DISTRONIC PLUS by varying the time span between one and two seconds. With this function, you can set the minimum distance that DISTRONIC PLUS keeps to the vehicle in front, dependent on vehicle speed. You can see this distance in the multifunction display (Y page 168). DISTRONIC PLUS displays in the speedometer G WARNING It is up to the driver to exercise discretion to select the appropriate setting given road conditions, traffic, driver's preferred driving style and applicable laws and driving recommendations for safe following distance. When DISTRONIC PLUS is activated, one or two segments ; in the set speed range light up. i For design reasons, the speed displayed in the speedometer may differ slightly from the speed set for DISTRONIC PLUS. If DISTRONIC PLUS detects a vehicle in front, segments ; between speed of the vehicle in front : and stored speed = light up. DISTRONIC PLUS displays in the multifunction display X To increase: turn control ; in direction =. DISTRONIC PLUS then maintains a greater distance between your vehicle and the vehicle in front. X To decrease: turn control ; in direction :. DISTRONIC PLUS then maintains a shorter distance between your vehicle and the vehicle in front. i Make sure that you maintain a sufficient and safe distance from the vehicle in front. Adjust the distance to the vehicle in front if necessary. General notes You can select the distance display in the Assistance menu (Y page 204) of the onboard computer. Display when DISTRONIC PLUS is deactivated X Select the Distance Display function using the on-board computer (Y page 204). When DISTRONIC PLUS is deactivated, you will see the following in the multifunction display: Driving systems 169 : Symbol for activated PRE-SAFE® Brake ; Vehicle in front, if detected = Distance indicator, current distance to the vehicle in front ? Specified minimum distance to the vehicle in front; adjustable Driving and parking Deactivating DISTRONIC PLUS There are several ways to deactivate DISTRONIC PLUS: X Briefly press the cruise control lever forwards :. A Own vehicle or Display when DISTRONIC PLUS is activated X Select the Distance Display function using the on-board computer (Y page 204). When you deactivate DISTRONIC PLUS, the DISTRONIC PLUS Off message is shown in the multifunction display for approximately five seconds. You will see the stored speed for about five seconds when you activate DISTRONIC PLUS. After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated: X Brake, unless the vehicle is stationary. i The last speed stored remains stored until you switch off the engine. i DISTRONIC PLUS is not deactivated if you depress the accelerator pedal. If you accelerate to overtake, DISTRONIC PLUS adjusts the vehicle's speed to the last speed stored after you have finished overtaking. DISTRONIC PLUS is automatically deactivated if: Ryou apply the parking brake. are driving slower than 15 mph (25 km/h) and there is no vehicle in front, or if the vehicle in front is no longer detected. RESP® intervenes or you deactivate ESP®. Rthe transmission is in the P, R or N position. Ryou switch off the radar sensor system (Y page 208). Ryou pull the cruise control lever towards you in order to pull away and the frontRyou : DISTRONIC PLUS activated ; Own vehicle = Specified minimum distance to the vehicle in front; adjustable ? Vehicle in front, if detected Z Driving and parking 170 Driving systems passenger door or one of the rear doors is open. Rthe vehicle has skidded. If DISTRONIC PLUS is deactivated, you will hear a warning tone. The DISTRONIC PLUS Off message is shown in the multifunction display for approximately five seconds. If the vehicle has been stopped by DISTRONIC PLUS and a malfunction occurs in the system, the Brake Immediately message appears in the multifunction display. Depress the brake pedal immediately so that the vehicle does not roll away. DISTRONIC PLUS is then deactivated, and the message disappears. G WARNING The DISTRONIC PLUS switches off and releases the brakes when the vehicle decelerates below the minimum speed of 20 mph (30 km/h) by operation of the system unless the DISTRONIC PLUS detects a vehicle directly ahead of you. At that time the driver must apply the brakes in order to reduce vehicle speed further or bring it to a stop. PLUS could lose sight of the preceding vehicle. Your vehicle could then accelerate to the previously selected speed. The DISTRONIC PLUS regulates only the distance between your vehicle and those directly ahead of it. It may not register stationary objects in the road, e.g.: Ra stopped vehicle in a traffic jam disabled vehicle Ran oncoming vehicle The driver must always be alert, observe all traffic and intercede as required by means of steering or braking the vehicle. Ra G WARNING The DISTRONIC PLUS should not be used in snowy or icy road conditions. Cornering, going into and coming out of a bend Tips for driving with DISTRONIC PLUS Important safety notes The following contains descriptions of certain road and traffic conditions in which you must be particularly attentive. In such situations, brake if necessary. DISTRONIC PLUS is then deactivated. G WARNING The DISTRONIC PLUS works to maintain the speed selected by the driver unless a moving obstacle proceeding directly ahead of it in the same travel direction is detected (e.g. following another vehicle ahead of you at your set distance). This means that: RYour vehicle can pass another vehicle after you have changed lanes. in a sharp turn or if the preceding vehicle is in a sharp turn, the DISTRONIC RWhile The ability of DISTRONIC PLUS to detect vehicles when cornering is limited. Your vehicle may brake unexpectedly or late. Vehicles traveling on a different line Driving systems DISTRONIC PLUS may not detect vehicles traveling on a different line. The distance to the vehicle in front will be too short. 171 Obstructions and stationary vehicles DISTRONIC PLUS has not detected the vehicle cutting in yet. The distance to this vehicle will be too short. DISTRONIC PLUS does not brake for obstacles or stationary vehicles. If, for example, the detected vehicle turns a corner and reveals an obstacle or stationary vehicle, DISTRONIC PLUS will not brake for these. Crossing vehicles Narrow vehicles DISTRONIC PLUS has not yet detected the vehicle in front on the edge of the road, because of its narrow width. The distance to the vehicle in front will be too short. DISTRONIC PLUS may mistakenly detect vehicles that are crossing your lane. Activating DISTRONIC PLUS at traffic lights with crossing traffic, for example, could cause your vehicle to pull away unintentionally. Dynamic handling package with sports mode General notes The most important part of the dynamic handling package with sports mode is the adjustable suspension system. This automatically controls and adapts the suspension to the respective driving situation. Z Driving and parking Other vehicles changing lane Driving systems 172 The calibration of the suspension depends on: Driving and parking Ryour driving style Rthe road surface conditions Ryour individual selection; see the following description If your vehicle is equipped with automatic transmission, the dynamic handling package with sports mode also includes steering wheel paddle shifters (Y page 145) with a manual drive program (Y page 147). Comfort tuning In Comfort mode, the driving characteristics of your vehicle are more comfortable. Select this mode if you prefer a more comfortable driving style, but also when driving fast on straight roads, e.g. highways. X Press button ;. Indicator lamp : goes out. Comfortable suspension tuning is selected. On vehicles with automatic transmission, drive program E is selected. HOLD function General notes The HOLD function can assist the driver in the following situations: Rwhen Example: position of dynamic handling package with sports mode button X Start the engine. Sports tuning The firmer setting of the suspension tuning in sports mode ensures even better contact with the road. Select this mode when employing a sporty driving style, e.g. on winding country roads. Your selection remains stored until you switch off the engine. X Press button ;. Indicator lamp : lights up. Sports suspension tuning is selected. Depending on the engine output, the accelerator pedal is more responsive. On vehicles with automatic transmission, drive program S is selected. pulling away, especially on steep slopes Rwhen maneuvering on steep slopes Rwhen waiting in traffic The vehicle is kept stationary without the driver having to depress the brake pedal. The braking effect is canceled and the HOLD function deactivated when you depress the accelerator pedal to pull away. Activation conditions You can activate the HOLD function if: Rthe vehicle is stationary. engine is running. Rthe driver's door is closed or your seat belt is fastened. Rthe parking brake is not applied. Rthe hood is closed. Rthe transmission is in position D, R or N. RDISTRONIC PLUS is deactivated. Rthe Activating the HOLD function X Make sure that the activation conditions are met. X Depress the brake pedal. The HOLD function does not replace the parking brake and must not be used for parking. The braking effect of the HOLD function is canceled and the vehicle could roll away if: Rthe X Quickly depress the brake pedal further until HOLD display : appears in the multifunction display. The HOLD function is activated. You can release the brake pedal. i If depressing the brake pedal the first time does not activate the HOLD function, wait briefly and then try again. G WARNING The vehicle's brakes are applied when the HOLD function is activated. For this reason, deactivate the HOLD function if the vehicle is to be set in motion by other means (e.g. in a car wash or by towing). Deactivating the HOLD function The HOLD function is deactivated automatically if: Ryou accelerate and the transmission is in position D or R. Ryou shift the transmission to position P. Ryou apply the brakes again with a certain amount of pressure until HOLD disappears from the multifunction display. Ryou activate DISTRONIC PLUS. G WARNING Never get out of the vehicle when the HOLD function is activated. The HOLD function must never be operated or deactivated by a passenger or from outside the vehicle. HOLD function is deactivated by depressing the accelerator pedal or the brake pedal. Rthere is a malfunction in the system or an interruption in the power supply, e.g. battery failure. Rthe electrical system in the engine compartment, the battery or the fuses are tampered with. Rthe battery is disconnected. If you leave the vehicle or park it, deactivate the HOLD function and secure the vehicle against rolling away. You will see a warning message in the multifunction display if the HOLD function is activated and: Rthe driver's door is open and the driver's seat belt is unfastened. Rthe engine is switched off. Rthe hood is opened. Shift to 'P' X Move the selector lever to P to prevent the vehicle from rolling away. The HOLD function is deactivated. The warning message in the multifunction display disappears. A horn will also sound at regular intervals if the HOLD function is activated and you: Rswitch the engine off, open the driver's door and take off your seat belt Ropen the hood The sounding of the horn alerts you to the fact that the vehicle has been parked while the HOLD function is still activated. If you attempt to lock the vehicle, the tone becomes louder. The vehicle is not locked until the HOLD function is deactivated. Z 173 Driving and parking Driving systems 174 Driving systems i If the engine has been switched off, it Driving and parking cannot be started again until the HOLD function has been deactivated. If there is a malfunction in the system or power supply while the HOLD function is activated, the Brake immediately message is shown in the multifunction display. Immediately depress the brake firmly until the warning message in the multifunction display goes out. You can also shift the transmission to position P. This deactivates the HOLD function. Rthe vehicle is stationary and the brake pedal is depressed (left foot). Rthe transmission is in position D. Activating RACE START X Important safety notes Depress the brake pedal with your left foot, and keep it depressed. X Turn the drive program selector clockwise (Y page 144) until the RS lamp lights up. The multifunction display shows the RACE START Confirm: Paddle UP Cancel: Paddle DOWN message. i If the conditions for activation are no longer fulfilled, RACE START is canceled. The multifunction display shows the RACE START canceled message. i RACE START is only available in AMG X RACE START vehicles. RACE START enables optimal acceleration from a standing start. The precondition for this is a suitable high-grip road surface. G WARNING RACE START is only available when SPORT handling mode is activated. SPORT handling mode only stabilizes the vehicle to a limited extent in the event of swerving or wheelspin. RACE START should only be used on specially designated roads. Always adapt your speed and driving style to the prevailing road and weather conditions. Conditions for activation RACE START can be activated when: Rthe doors are closed. Rthe engine is running and it has reached an operating temperature of approximately 176 ‡ (80 †). This is the case when the engine oil temperature in the multifunction display stops flashing. RSPORT handling mode is activated. (Y page 62) Rthe steering wheel is in the straight-ahead position. To cancel: pull the left steering wheel shift paddle (Y page 145). or X To confirm: pull the right steering wheel shift paddle (Y page 145). The multifunction display shows the RACE START available Depress accelerator message. i If you do not depress the accelerator pedal fully within two seconds, RACE START is canceled. The multifunction display shows the RACE START not possible See Operator's Manual message. X Depress the accelerator pedal fully. The engine speed increases to approximately 4000 rpm. The multifunction display shows the RACE START Release brake to start message. i If you do not release the brake pedal within seven seconds, RACE START is canceled. The multifunction display shows the RACE START canceled message. X Take your foot off the brake, but keep the accelerator pedal depressed. The vehicle pulls away at maximum acceleration. Driving systems RACE START is deactivated when a speed of approximately 30 mph (Canada: 50 km/h) is reached. Drive program S+ is activated. SPORT handling mode remains activated. RACE START is deactivated immediately if you release the accelerator pedal during RACE START or if any of the activation conditions are no longer fulfilled. The multifunction display shows the RACE START not possible See Operator's Manual message. i If RACE START is used repeatedly within a short period of time, it is only available again after the vehicle has been driven a certain distance. 4MATIC (permanent four-wheel drive) 4MATIC ensures that all four wheels are permanently driven. Together with ESP®, it improves the traction of your vehicle whenever a drive wheel spins due to insufficient grip. G WARNING If a drive wheel is spinning due to insufficient traction: RWhile driving off, apply as little throttle as possible. RWhile driving, ease up on the accelerator pedal. RAdapt your speed and driving style to the prevailing road conditions. Failure to observe these guidelines could cause the vehicle to skid. The 4MATIC cannot prevent accidents resulting from excessive speed. ! Never tow the vehicle with one axle raised. This may damage the transfer case. Damage of this sort is not covered by the Mercedes-Benz Limited Warranty. All wheels must remain either on the ground or be fully raised. Observe the instructions for towing the vehicle with all wheels in full contact with the ground. i In wintry driving conditions, the maximum effect of 4MATIC can only be achieved if you use winter tires (M+S tires), with snow chains if necessary. PARKTRONIC Important safety notes i PARKTRONIC is only available in Canada. G WARNING The PARKTRONIC is a supplemental system. It is not intended to, nor does it replace, the need for extreme care. The responsibility during parking and other critical maneuvers always remains with the driver. G WARNING Make sure no persons or animals are in or near the area in which you are parking/ maneuvering. Otherwise, they could be injured. PARKTRONIC is an electronic parking aid with ultrasonic sensors. It indicates visually and audibly the distance between your vehicle and an object. PARKTRONIC is activated automatically when you: Rswitch on the ignition the transmission to position D, R or N Rrelease the parking brake PARKTRONIC is deactivated at speeds above 11 mph (18 km/h). It is reactivated at lower speeds. PARKTRONIC monitors the area around your vehicle using six sensors in the front bumper and four sensors in the rear bumper. Rshift Z Driving and parking The multifunction display shows the RACE START active message. 175 176 Driving systems Driving and parking Front sensors Center Approximately 40 in (approximately 100 cm) Corners Approximately 24 in (approximately 60 cm) Rear sensors : Sensors in the front bumper, left-hand side (example) Range of the sensors General notes The sensors must be free of dirt, ice and slush; otherwise they may not function correctly. Clean the sensors regularly, taking care not to scratch or damage them (Y page 287). Center Approximately 48 in (approximately 120 cm) Corners Approximately 32 in (approximately 80 cm) ! When parking, pay particular attention to objects above or below the sensors, such as flower pots or trailer drawbars. PARKTRONIC does not detect such objects when they are in the immediate vicinity of the vehicle. You could damage the vehicle or the objects. The sensors may not detect snow and other objects that absorb ultrasonic waves. Ultrasonic sources such as an automatic car wash, the compressed-air brakes on a truck or a pneumatic drill could cause PARKTRONIC to malfunction. PARKTRONIC may not function correctly on uneven terrain. Minimum distance Side view Center Approximately 8 in (approximately 20 cm) Corners Approximately 6 in (approximately 15 cm) If there is an obstacle within this range, the relevant warning displays light up and a warning tone sounds. If the distance falls below the minimum, the distance may no longer be shown. Top view Driving systems The warning displays show the distance between the sensors and the obstacle. The warning display for the front area is located on the dashboard above the center air vents. The warning display for the rear area is located on the headliner in the rear compartment. One or more segments light up as the vehicle approaches an obstacle, depending on the vehicle's distance from the obstacle. From the: Rsixth segment onwards, you will hear an intermittent warning tone for approximately two seconds. Rseventh segment onwards, you will hear a warning tone for approximately two seconds. This indicates that you have now reached the minimum distance. Deactivating/activating PARKTRONIC Warning display for the front area : Segments on the left-hand side of the vehicle ; Segments on the right-hand side of the vehicle = Segments showing operational readiness : Indicator lamp The warning display for each side of the vehicle is divided into five yellow and two red segments. PARKTRONIC is operational if yellow segments showing operational readiness = light up. The selected transmission position determines which warning display is active when the engine is running. ; To deactivate/activate PARKTRONIC Transmission position Warning display D Front area activated R, N or the vehicle is rolling backwards Rear and front areas activated P No areas activated If indicator lamp : lights up, PARKTRONIC is deactivated. Parking Guidance is also deactivated. i PARKTRONIC is automatically activated when you turn the SmartKey to position 2 in the ignition lock. Z Driving and parking Warning displays 177 178 Driving systems Problems with PARKTRONIC Driving and parking Problem Possible causes/consequences and M Solutions Only the red segments PARKTRONIC has malfunctioned and has switched off. in the PARKTRONIC X If problems persist, have PARKTRONIC checked at a qualified warning displays are lit. specialist workshop. You also hear a warning tone for approximately two seconds. PARKTRONIC is deactivated after approximately 20 seconds, and the indicator lamp in the PARKTRONIC button lights up. Only the red segments The PARKTRONIC sensors are dirty or there is interference. in the PARKTRONIC X Clean the PARKTRONIC sensors (Y page 287). warning displays are lit. X Switch the ignition back on. PARKTRONIC is deactivated after The problem may be caused by an external source of radio or approximately 20 ultrasound waves. seconds. X See if PARKTRONIC functions in a different location. Parking Guidance Important safety notes i Parking Guidance is only available in Canada. Parking Guidance is an electronic parking aid with ultrasound. Ultrasound is used to measure the road on both sides of the vehicle. A suitable parking space is indicated by the parking symbol. You receive steering instructions when parking. You may also use PARKTRONIC (Y page 175). G WARNING Parking Guidance is merely an aid and may display parking spaces that are not suitable for parking, for example: Rno-parking areas spaces with unsuitable surfaces (road surface) Rdriveways Rentrances and exits Parking Guidance detects and measures potential parking spaces while driving past. Changes to the parking space after this point are not taken into account, for example if the vehicle in front of or behind the parking space changes position or objects in the parking space are moved. Even when using Parking Guidance, you are still responsible for driving carefully. If you rely on Parking Guidance alone, you could Rparking Driving systems G WARNING Objects located above the height range of Parking Guidance will not be detected when the parking space is measured. These objects are not taken into account when the parking procedure is calculated, e.g. overhanging loads, tail sections or loading ramps of goods vehicles. Under some circumstances, Parking Guidance might therefore issue steering instructions too soon. This may lead to a collision. For this reason, you should avoid using Parking Guidance in such situations. G WARNING Make sure that no persons or animals are in the maneuvering range. Otherwise, they could be injured. ! Pay particular attention to low objects or objects with flat surfaces, such as trailer drawbars, posts, cross beams and curbs. These types of objects cannot be detected by Parking Guidance and may damage the vehicle. When PARKTRONIC is deactivated, Parking Guidance is also unavailable. Use Parking Guidance for parking spaces: are parallel to the direction of travel are on straight roads, not bends Rthat are on the same level as the road, i.e. not on the pavement, for example. Parking Guidance may not detect flat curbs Parking tips: Rsnowfall or heavy rain may lead to a parking space being measured inaccurately. attention to the PARKTRONIC (Y page 177) warning messages during the parking procedure. Rwhen transporting a load which protrudes from your vehicle, you must not use Parking Guidance. Rnever use Parking Guidance with snow chains or an emergency spare wheel mounted. Rmake sure that the tire pressures are always correct. This has a direct effect on the steering instructions. Rthe way your vehicle is positioned in the parking space after parking is dependent on various factors. These include the position and shape of the vehicles parked in front and behind it and the conditions of the location. In some cases, Parking Guidance may guide you too far or not far enough into a parking space. In some cases, it may also lead you across or onto the curb. If necessary, cancel the parking procedure with Parking Guidance. Rpay ! If unavoidable, you should drive over obstacles such as curbs slowly and not at a sharp angle. Otherwise, you may damage the wheels or tires. Detecting a parking space Rthat Rthat Ron narrow roads, drive past the parking space as close as possible. Rparking spaces that are littered, overgrown or partially occupied by trailer drawbars might be identified incorrectly or not at all. : Detected parking space on the left ; Parking symbol = Detected parking space on the right Parking Guidance is automatically activated when you drive forwards. The system is operational at speeds of up to approximately 22 mph (35 km/h). While in operation, the Z Driving and parking cause an accident and injure yourself and others. Safety always remains your responsibility and you must continue paying careful attention to your immediate surroundings when parking and maneuvering. 179 Driving and parking 180 Driving systems system independently locates and measures parking spaces on both sides of the vehicle. When driving at speeds below 19 mph (30 km/h), you will see parking symbol ; as a status indicator in the instrument cluster. When a parking space has been detected, an arrow towards the right = or the left : also appears. Parking Guidance only displays parking spaces on the front-passenger side as standard. Parking spaces on the driver's side are displayed as soon as the turn signal on the driver's side is activated. To park on the driver's side, you must leave the driver's side turn signal switched on until you have engaged reverse gear. Parking Guidance will only detect parking spaces: are parallel to the direction of travel are at least 5 ft (1.5 m) wide Rthat are at least 4.3 ft (1.3 m) longer than your vehicle A parking space is displayed while you are driving past it, and until you are approximately 50 ft (15 m) away from it. X Stop the vehicle when the parking space symbol shows the desired parking space in the instrument cluster. X Shift the transmission to position R. The following message appears in the multifunction display: Check vehicle surroundings Confirm with OK. X Press the a button on the multifunction steering wheel to confirm. The multifunction display switches to Parking Guidance. Depending on your distance from the parking space, the Please drive backwards message appears in the multifunction display. Rthat Rthat X Parking G WARNING The Parking Guidance is only an aid and may not detect all obstacles. The Parking Guidance does not relieve you of the responsibility to pay attention. You are always responsible for safety and must continue to pay attention to your immediate surroundings when parking and maneuvering. Otherwise, you could endanger yourself and others. X If necessary, reverse towards the parking space. This is indicated by an arrow pointing backwards. Continue backing up until you hear a tone. Stop – the parking position has been reached. The arrow is white. The Please steer to the right or Please steer to the left message appears in the multifunction display. While the vehicle is stationary, turn the steering wheel in the specified direction until the arrow is white and a warning tone sounds. X To reverse into the parking space: maintain the steering wheel angle and reverse carefully. Driving systems Stop as soon as you hear a warning tone, The vehicle has reached the position in which you need to countersteer. The Please steer to the left or Please steer to the right message appears in the multifunction display. X Countersteering: while the vehicle is stationary, turn the steering wheel in the specified direction until the arrow is white and a warning tone sounds. X To reverse into the parking space: maintain the steering wheel angle and reverse carefully. X Stop as soon as you hear a warning tone, at the latest when PARKTRONIC sounds the continuous warning tone. The Parking Guidance finished message appears in the multifunction display and a warning tone sounds. You may be asked to steer in a different direction and then change gear. In this case, further displays in the multifunction display will direct you to the final position. X X Maneuver if necessary. Always observe the warning messages displayed by PARKTRONIC (Y page 177). Canceling Parking Guidance X Press the PARKTRONIC button on the center console (Y page 177). Parking Guidance is canceled immediately and PARKTRONIC is deactivated. Parking Guidance is canceled automatically if it is no longer possible to guide you into the parking space, or if a malfunction occurs. The parking space symbol goes out and a warning tone sounds. The Parking Guidance Canceled message appears in the multifunction display. Rear view camera Important safety notes The rear view camera is an optical parking aid. It shows the area behind your vehicle in the COMAND display. G WARNING Make sure that no persons or animals are in the maneuvering range. Otherwise, they could be injured. The rear view camera is located in the handle strip of the trunk lid. : Rear view camera View through the camera The area behind the vehicle is displayed in a mirror-inverted manner, as in the rear-view mirror. G WARNING The rear view camera is only an aid and may display obstacles Rfrom a distorted perspective Rinaccurately Rmay not display obstacles at all The rear view camera does not relieve you of the responsibility to be cautious. Take care and pay careful attention. The rear view camera may not show objects which are Rvery close to the rear bumper the rear bumper Rabove the trunk handle Runder Z Driving and parking X 181 Driving systems Driving and parking 182 You are responsible for safety at all times and must continue to pay attention to the immediate surroundings when parking and maneuvering. This includes the area behind, in front of, and beside the vehicle. Otherwise you could endanger yourself and/or others. G WARNING The rear view camera will not function or will not fully function if: Rthe trunk lid is open Rit is raining or snowing strongly or if it is foggy Rit is night or if you are parking/ maneuvering your vehicle in a very dark area Ra very bright white light is affecting the camera Rthe immediate vicinity is illuminated with fluorescent light (the display of the COMAND system can flicker) Rtemperature changes abruptly, for example if you drive out of the cold into a heated garage (condensation on the lens) Rthe camera lens is dirty or covered Rthe rear of your vehicle is damaged In this case, have the position and the setting of the camera checked at a specialist workshop. Mercedes-Benz recommends that you consult a MercedesBenz Center for this purpose. Do not use the rear view camera in these situations. You could otherwise injure yourself and other people and/or cause damage - including damage to your vehicle while parking/maneuvering. Activating the rear view camera X Make sure that the SmartKey is in position 2 in the ignition lock. X Make sure that the "rear view camera" function is selected in COMAND (see the separate operating instructions for COMAND). X Engage reverse gear. The area behind the vehicle is shown in the COMAND display. ATTENTION ASSIST Important safety notes ATTENTION ASSIST helps you during long, monotonous journeys such as on freeways and interstate highways. It is active in the range between 50 mph (80 km/h) and 112 mph (180 km/h). If ATTENTION ASSIST detects typical indicators of fatigue or increasing lapses in concentration on the part of the driver, it suggests you take a break. G WARNING ATTENTION ASSIST is only an aid and may detect your tiredness or lapses in concentration too late or not at all. It is not a substitute for a well-rested and attentive driver. Fatigue may cause you to recognize hazardous situations too late, misjudge a situation or react more slowly. For this reason, make sure you feel rested before you begin driving and during your journey. Make sure that you take regular breaks in time, particularly on long journeys. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. ATTENTION ASSIST assesses your level of fatigue or lapses in concentration by taking the following criteria into account: Ryour personal driving style, e.g. steering characteristics Rdriving conditions, e.g. time, driving time The functionality of ATTENTION ASSIST is restricted and warnings may be delayed or not occur at all: Rif the road condition is poor, e.g. if the surface is uneven or if there are potholes Rif there is a strong side wind Rif you have adopted a sporty driving style with high cornering speeds or high rates of acceleration Rif you predominantly drive at speeds under 50 mph (80 km/h) or over 112 mph (180 km/h) Rif you are currently using COMAND or making a telephone call with it Rif the time has been set incorrectly Rin active driving situations, such as when you change lanes or change your speed Warning and display messages in the multifunction display X Activate ATTENTION ASSIST using the onboard computer (Y page 205). Symbol : appears in the multifunction display. If ATTENTION ASSIST is active, you will be warned no sooner than 20 minutes after your journey has begun. You will then hear an intermittent warning tone twice, and the Attention Assist: Drowsiness Detected message appears in the multifunction display. X If necessary, take a break. X Press a to confirm the message. On long journeys, take regular breaks in good time to allow yourself to rest properly. If you do not take a break and ATTENTION ASSIST still detects typical indicators of fatigue or increasing lapses in concentration, you will be warned again after 15 minutes at the earliest. ATTENTION ASSIST is reset when you continue your journey and starts assessing your tiredness again if: Ryou switch off the engine. take off your seat belt and open the driver's door, e.g. for a change of drivers or to take a break. Ryou Lane Tracking package General notes The Lane Tracking package consists of Blind Spot Assist (Y page 183) and Lane Keeping Assist (Y page 185). Blind Spot Assist Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning display in the exterior mirrors draws your attention to vehicles detected in the monitored area. If you then switch on the corresponding turn signal to change lane, you will also receive an optical and audible collision warning. Blind Spot Assist uses sensors in the rear bumper for monitoring purposes. G WARNING Blind Spot Assist is only an aid designed to assist driving. It may fail to detect some vehicles and is no substitute for attentive driving. Blind Spot Assist cannot detect road and traffic conditions. It may fail to detect narrow vehicles, such as motorcycles or bicycles, or may only detect them too late. Monitoring may be affected by dirty sensors, strong spray or poor visibility caused by snow, Z 183 Driving and parking Driving systems Driving and parking 184 Driving systems rain or mist, for example. In this case, vehicles are detected late or not at all. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. i USA only: This device has been approved by the FCC as a “Vehicular Radar System”. The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user’s authority to operate the equipment. For Blind Spot Assist to assist you when driving, the radar sensor system must be activated (Y page 208) and operational. Monitoring range of the sensors Blind Spot Assist monitors the area shown in the figure up to 10 ft (3 m) behind and immediately adjacent to your vehicle. G WARNING Blind Spot Assist monitors certain areas in the immediate vicinity of your vehicle. Vehicles that approach and drive past at high speeds are not detected. There is no display and no warning. If the lanes are very wide, it may not be possible to monitor the complete width of the neighboring lane. For this reason, vehicles in the next lane may not be detected, especially if they are driving in a staggered formation. This may be the case if vehicles are driving at that edge of their lane which is furthest away from your vehicle. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. If the lanes are narrow, vehicles driving in the lane beyond the lane next to your vehicle may be indicated, especially if the vehicles are not driving in the middle of their lane. This may be the case if the vehicles are driving on the inner side of their lane. Due to the nature of the system: Rwarnings may be issued in error when driving close to crash barriers or similar solid lane borders. Rwarnings may be interrupted when driving alongside long vehicles, such as trucks, for a prolonged time. The two sensors for Blind Spot Assist are integrated into the sides of the rear bumper. Make sure that the bumper is free from dirt, ice or slush around the sensors. The rear sensors must not be covered, for example by bicycle racks or overhanging loads. Following a severe impact or in the event of damage to the bumpers, have the function of the radar sensors checked at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Blind Spot Assist may otherwise not work properly. Indicator and warning display : Yellow indicator lamp/red warning lamp When Blind Spot Assist is activated, indicator lamp : lights up yellow in the exterior mirrors up to a vehicle speed of 20 mph (30 km/h). When the vehicle speed exceeds 20 mph (30 km/h), the indicator lamp goes out and Blind Spot Assist is ready for use. When your speed exceeds approximately 20 mph (30 km/h), warning lamp : lights up red on the corresponding side whenever a vehicle is detected in the blind spot monitoring range. This warning is always given when a vehicle enters the blind spot monitoring range from behind or from the side. When you are passing another vehicle, the warning is emitted only if the difference in speed is less than 7 mph (12 km/h). The yellow indicator lamp goes out if reverse gear is engaged. In this event, Blind Spot Assist is no longer active. The brightness of the indicator/warning lamps is adjusted automatically according to the ambient light. Collision warning If a vehicle is detected in the monitoring range of Blind Spot Assist and you switch on the turn signal, a double warning tone sounds. Red warning lamp : flashes. If the turn signal remains on, detected vehicles are indicated by the flashing of red warning lamp :. There are no further warning tones. Switching on Blind Spot Assist X Make sure that the radar sensor system (Y page 208) and Blind Spot Assist (Y page 205) are activated in the on-board computer. X Turn the SmartKey to position 2 in the ignition lock. Warning lamps : light up red in the exterior mirrors for approximately 1.5 seconds and then turn yellow. Lane Keeping Assist Important safety notes Lane Keeping Assist monitors the area in front of your vehicle by means of a camera at the top of the windshield. Lane Keeping Assist detects lane markings on the road and warns you before you leave your lane unintentionally. G WARNING Blind Spot Assist is not active at speeds under approximately 20 mph (30 km/h). The indicator lamps in the exterior mirrors are yellow. Vehicles in the monitoring range are then not indicated. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. : Lane Keeping Assist camera If you have chosen the Display Unit Speed-/Odometer(Y page 206) function in the on-board computer and select km as the unit of measurement, Active Lane Keeping Assist is active from speeds of 60 km/h. If Z 185 Driving and parking Driving systems 186 Driving systems the miles display unit is selected, the assistance range begins at 40 mph. Driving and parking G WARNING Lane Keeping Assist does not keep your vehicle in its lane. It is only an aid and may detect the lane markings on the road incorrectly or not at all. The system may be impaired or may not function if: Rthere is poor visibility, e.g. due to insufficient illumination of the road, or due to snow, rain, fog or spray. Rthere is glare, e.g. from oncoming traffic, the sun, or reflection from other vehicles. Rthe windshield is dirty, fogged up or covered, for instance by a sticker, in the vicinity of the camera. Rseveral or no lane markings for a single lane are present. Rthe lane markings are worn away, dark or covered up, e.g. by dirt or snow. Rthe distance to the vehicle in front is too small and the lane markings thus cannot be detected. Rthe lane markings on the road are unclear, e.g. near roadworks. Rthe lane markings change quickly, e.g. lanes branch off, cross one another or merge. Rthe road is narrow and winding. Lane Keeping Assist cannot detect road and traffic conditions. It is not a substitute for attentive driving. You are responsible for the vehicle's speed, braking in good time, and steering correctly. Always adapt your driving style to suit the prevailing road and weather conditions. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. A warning can be given when a front wheel passes over a lane marking. It will warn you by means of intermittent vibration in the steering wheel for up to 1.5 seconds. In order that you are warned only when necessary and in good time if you cross the lane marking, the system recognizes certain conditions and warns you accordingly. The warning vibration occurs earlier if: Ryou approach the outer lane marking on a bend. Rthe road has very wide lanes, e.g. a freeway. Rthe system recognizes solid lane markings. The warning vibration occurs later if: Rthe road has narrow lanes. cut the corner on a bend. No warning vibration occurs if: Ryou Ryou clearly and actively steer, brake or accelerate. Ryou cut the corner on a sharp bend. Ra driving safety system intervenes, e.g. ABS, BAS or ESP®. Ryou switch on the turn signals. In this event, the warnings are suppressed for a certain period of time. Switching on Lane Keeping Assist X Activate Lane Keeping Assist using the onboard computer (Y page 205). Symbol : appears in the multifunction display. If your speed exceeds 40 mph (60 km/h) and lane markings are detected, symbol : is shown in green. Lane Keeping Assist is ready for use. Active Driving Assistance package General notes The Active Driving Assistance package consists of DISTRONIC PLUS (Y page 161), Active Blind Spot Assist (Y page 187) and Active Lane Keeping Assist (Y page 190). Active Blind Spot Assist Important safety notes Active Blind Spot Assist uses a radar sensor system to monitor the side areas of your vehicle which are in back of the driver. A warning display in the exterior mirrors draws your attention to vehicles detected in the monitored area. If you then switch on the corresponding turn signal to change lane, you will also receive an optical and audible collision warning. If a risk of lateral collision is detected, corrective braking may help you avoid a collision. To support the coursecorrecting brake application, Active Blind Spot Assist also uses the forward-facing radar sensor system. Active Blind Spot Assist supports you from speeds of approximately 20 mph (30 km/h). G WARNING Active Blind Spot Assist is only an aid, and may detect vehicles/obstacles incorrectly or not at all. The system may be impaired or may not function if: vehicle's speed, braking in good time, and steering correctly. Always adapt your driving style to suit the prevailing road and weather conditions. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. i USA only: This device has been approved by the FCC as a “Vehicular Radar System”. The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user’s authority to operate the equipment. For Active Blind Spot Assist to assist you when driving, the radar sensor system must be activated (Y page 208) and operational. Monitoring area Active Blind Spot Assist monitors the area shown in the figure up to 10 ft (3 m) behind and immediately adjacent to your vehicle. For this purpose, Active Blind Spot Assist uses radar sensors in the rear bumper. Rthere is poor visibility, e.g. due to snow, rain, fog or spray. Rthe rear and/or front sensors are dirty. Active Blind Spot Assist may not detect narrow vehicles, such as motorcycles or bicycles, or may only detect them too late. It cannot detect vehicles that are overtaken at a small distance and then enter the blind spot area. Active Blind Spot Assist cannot detect road and traffic conditions. It is not a substitute for attentive driving. You are responsible for the Z 187 Driving and parking Driving systems 188 Driving systems Driving and parking G WARNING Active Blind Spot Assist monitors certain areas in the immediate vicinity of your vehicle. Vehicles that approach and drive past at high speeds are not detected. No visual nor audible warnings are emitted and the system does not brake the vehicle to correct your course. If the lanes are very wide, it may not be possible to monitor the complete width of the neighboring lane. For this reason, vehicles in the next lane may not be detected, especially if they are driving in a staggered formation. This may be the case if vehicles are driving at that edge of their lane which is furthest away from your vehicle. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. If the lanes are narrow, vehicles driving in the lane beyond the lane next to your vehicle may be indicated, especially if the vehicles are not driving in the middle of their lane. This may be the case if there are vehicles driving at the inner edge of their lanes. Due to the nature of the system: Rwarnings may be issued in error when driving close to crash barriers or similar solid lane borders. Rwarnings may be interrupted when driving alongside long vehicles, such as trucks, for a prolonged time. Two Active Blind Spot Assist radar sensors are integrated into the front and rear bumpers respectively. An additional radar sensor is located behind the cover in the radiator grill. Make sure that the sensor areas on the bumpers and the sensor cover in the radiator grill are free of dirt, ice and slush. The rear sensors must not be covered, for example by cycle racks or overhanging cargo. Following a severe impact or in the event of damage to the bumpers, have the function of the radar sensors checked at a qualified specialist workshop. Blind Spot Assist may otherwise not work properly. Indicator and warning display : Yellow indicator lamp/red warning lamp When Active Blind Spot Assist is activated, indicator lamp : lights up yellow in the exterior mirrors up to a vehicle speed of 20 mph (30 km/h). When the vehicle speed exceeds 20 mph (30 km/h), the indicator lamp goes out and Active Blind Spot Assist is ready for use. When your speed exceeds approximately 20 mph (30 km/h), warning lamp : lights up red on the corresponding side whenever a vehicle is detected in the blind spot monitoring range. This warning is always given when a vehicle enters the blind spot monitoring range from behind or from the side. When you are passing another vehicle, the warning is emitted only if the difference in speed is less than 7 mph (12 km/h). The yellow indicator lamp goes out if reverse gear is engaged. In this event, Active Blind Spot Assist is no longer active. The brightness of the indicator/warning lamps is adjusted automatically according to the ambient light. G WARNING Active Blind Spot Assist is not active at speeds lower than 20 mph (30 km/h). The indicator lamps in the exterior mirrors are yellow. Vehicles in the monitoring range are then not indicated. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. Visual and audible collision warnings If you switch on the appropriate turn signals and a vehicle is detected in the side monitoring range, you will receive a visual and acoustic collision warning. You will hear a double warning tone and red warning lamp : flashes. If the turn signal remains on, vehicles detected are indicated by the flashing of red warning lamp :. There are no further warning tones. Course-correcting brake application If Active Blind Spot Assist detects a risk of a lateral collision in the monitoring range, a course-correcting brake application is carried out. This is meant to assist you in avoiding a collision. The course-correcting brake application is available in the range between 20 mph (30 km/h) and 120 mph (200 km/h). If a course-correcting brake application occurs, red warning lamp : flashes in the exterior mirror and the following is shown in the multifunction display, for example: G WARNING Active Blind Spot Assist is only an aid designed to assist driving. It is not a substitute for attentive driving. In some cases, the course-correcting brake application is not sufficient to avoid a collision. In such a case, you must steer, brake or accelerate. In very rare cases, the system may erroneously detect a danger of collision in the area of crash barriers or similar lane borders and apply the brakes. Active Blind Spot Assist does not detect all traffic situations and road users. Always make sure that there is sufficient distance on the side for other traffic or obstacles. An inappropriate brake application may be interrupted at any time if you steer slightly in the opposite direction or accelerate. You are responsible for driving at appropriate speeds, braking in good time, and steering correctly. Always adapt your driving style to suit the prevailing road and weather conditions. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. There will be either no or only a weak coursecorrecting brake application if: Rthere are vehicles or obstacles, e.g. crash barriers, located on both sides of your vehicle. Ra vehicle approaches you too closely at the side. Ryou have adopted a sporty driving style with high cornering speeds. Ryou clearly brake or accelerate. Ra driving safety system intervenes, e.g. ESP® or PRE-SAFE® Brake. RESP® is switched off. Ra loss of tire pressure or a defective tire is detected. Switching on Active Blind Spot Assist Make sure that the radar sensor system (Y page 208) and Active Blind Spot Assist (Y page 205) are activated in the on-board computer. X Turn the SmartKey to position 2 in the ignition lock. Warning lamps : light up red in the exterior mirrors for approximately 1.5 seconds and then turn yellow. X Z 189 Driving and parking Driving systems 190 Driving systems Driving and parking Active Lane Keeping Assist Important safety notes Active Lane Keeping Assist monitors the area in front of your vehicle by means of a camera at the top of the windshield. Active Lane Keeping Assist detects lane markings on the road and warns you before you leave your lane unintentionally. If you do not react to the warning, a lane-correcting application of the brakes can bring the vehicle back into the original lane. : Active Lane Keeping Assist camera If you have selected the Display Unit Speed-/Odometer(Y page 206) function in the on-board computer and select km as the unit of measurement, Active Lane Keeping Assist is active from speeds of 60 km/h. If the miles display unit is selected, the assistance range begins at 40 mph. G WARNING Active Lane Keeping Assist does not keep your vehicle in its lane. It is only an aid and may detect the lane markings on the road incorrectly or not at all. The system may be impaired or may not function if: Rseveral or no lane markings for a single lane are present. is poor visibility, e.g. due to insufficient illumination of the road, or due to snow, rain, fog or spray. Rthere is glare, e.g. from oncoming traffic, the sun, or reflection from other vehicles. Rthere Rthe windshield is dirty, fogged up or covered, for instance by a sticker, in the vicinity of the camera. Rthe lane markings are worn away, dark or covered up, e.g. by dirt or snow. Rthe distance to the vehicle in front is too small and the lane markings thus cannot be detected. Rthe lane markings on the road are unclear, e.g. near roadworks. Rthe lane markings change quickly, e.g. lanes branch off, cross one another or merge. Rthe road is narrow and winding. Active Lane Keeping Assist cannot detect road and traffic conditions. It is not a substitute for attentive driving. You are responsible for the vehicle's speed, braking in good time, and steering correctly. Always adapt your driving style to suit the prevailing road and weather conditions. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. Warning vibration in the steering wheel A warning can be given when a front wheel passes over a lane marking. You will be warned by means of intermittent vibration in the steering wheel for up to 1.5 seconds. In order that you are warned only when necessary and in good time if you cross the lane marking, the system recognizes certain conditions and warns you accordingly. The warning vibration occurs earlier if: Ryou approach the outer lane marking on a bend. Rthe road has very wide lanes, e.g. a freeway. Rthe system recognizes solid lane markings. The warning vibration occurs later if: Rthe Ryou road has narrow lanes. cut the corner on a bend. No warning vibration occurs if: Ryou clearly and actively steer, brake or accelerate. Ryou cut the corner on a sharp bend. Ra driving safety system intervenes, e.g. ABS, BAS or ESP®. Ryou switch on the turn signals. In this event, the warnings are suppressed for a certain period of time. Lane-correcting brake application If you leave your lane under certain circumstances the vehicle will brake briefly on one side. This is meant to assist you in bringing the vehicle back to the original lane. This function is available in the range between 40 mph and 120 mph (60 km/h to 200 km/h). A lane-correcting brake application can only be made after driving over a solid, recognizable lane marking. Before this, a warning must be given by means of intermittent vibration in the steering wheel. In addition, a lane with lane markings on both sides must be recognized. The brake application also slightly reduces vehicle speed. If a lane-correcting brake application occurs, the following, for example, appears in the multifunction display: i A further lane-correcting brake application can only occur after your vehicle has returned to the original lane. G WARNING Active Lane Keeping Assist does not keep your vehicle in its lane. It is only an aid designed to assist driving. It is not a substitute for attentive driving. In some cases, the lane- correcting brake application is not sufficient to bring your vehicle back to the original lane. In such cases, you must steer the vehicle yourself to ensure that it does not leave the lane. Active Lane Keeping Assist does not detect road and traffic conditions. Always make sure that there is sufficient distance to the side for other traffic or obstacles. In rare cases, unclear markings or particular structures on the roadway can be recognized as solid lane markings. An inappropriate brake application, e.g. after intentionally driving over a solid lane marking, may be interrupted at any time by steering slightly in the opposite direction. Active Lane Keeping Assist cannot take weather conditions into account. You are responsible for the driving at appropriate speeds, braking in good time, and steering correctly. Always adapt your driving style to suit the prevailing road and weather conditions. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yourself and others. No lane-correcting brake application occurs if: Ryou clearly and actively steer, brake or accelerate. Ryou cut the corner on a sharp bend. Ryou switch on the turn signals. Ra driving safety system intervenes, e.g. ESP®, PRE-SAFE® Brake or Active Blind Spot Assist. Ryou have adopted a sporty driving style with high cornering speeds or high rates of acceleration. RESP® is switched off. Rthe transmission is not in position D. Ra loss of tire pressure or a defective tire has been detected and displayed. Z 191 Driving and parking Driving systems Driving systems 192 Driving and parking Active Lane Keeping Assist does not detect traffic situations or road users. An inappropriate brake application may be interrupted at any time if you: Rsteer slightly in the opposite direction. a turn signal. Rclearly brake or accelerate. A lane-correcting brake application is interrupted automatically if: Ruse Ra driving safety system intervenes, e.g. ESP®, PRE-SAFE® Brake or Active Blind Spot Assist. Rlane markings can no longer be recognized. Switching on Active Lane Keeping Assist X Switch on Active Lane Keeping Assist using the on-board computer (Y page 205). Symbol : appears in the multifunction display. If your speed exceeds 40 mph (60 km/h) and lane markings are detected, symbol : is shown in green. Active Lane Keeping Assist is ready for use. Useful information ............................ Important safety notes .................... Displays and operation .................... Menus and submenus ...................... Display messages ............................. Warning and indicator lamps in the instrument cluster ............................ 194 194 194 198 213 239 On-board computer and displays 193 On-board computer and displays 194 Displays and operation Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). Important safety notes You will find an illustration of the instrument cluster in the "At a glance" section (Y page 29). G WARNING A driver's attention to the road and traffic conditions must always be his/her primary focus when driving. For your safety and the safety of others, selecting features through the multifunction steering wheel should only be done by the driver when traffic and road conditions permit it to be done safely. Bear in mind that at a speed of just 30 mph (approximately 50 km/h ), your vehicle is covering a distance of 44 feet (approximately 14 m) every second. G WARNING No messages will be displayed if either the instrument cluster or the multifunction display is inoperative. As a result, you will not be able to see information about your driving conditions, such as Rspeed Routside temperature Rwarning/indicator lamps Rmalfunction/warning messages of any systems Driving characteristics may be impaired. If you must continue to drive, do so with added caution. Contact an authorized MercedesBenz Center as soon as possible. Rfailure G WARNING Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems. They do not replace the owner's and/or driver's responsibility to maintain the vehicle's operating safety. Have all required maintenance and safety checks performed on the vehicle. Bring the vehicle to an authorized Mercedes-Benz Center to address the malfunction and warning messages. Displays and operation Coolant temperature display G WARNING Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an overheated engine can cause serious burns which can occur just by opening the engine hood. Stay away from the engine if you see or hear steam coming from it. Stop the vehicle in a safe location away from other traffic. Turn off the engine, get out of the vehicle and do not stand near the vehicle until the engine has cooled down. The coolant temperature gauge is in the instrument cluster on the left-hand side. Under normal operating conditions and with the specified coolant level, the coolant temperature may rise to 248 ‡ (120 †). ! If the coolant temperature is too high a display message is shown. If the coolant temperature rises above 248 ‡(120 †), do not drive any further as this could damage the engine. The segments between the speed of the vehicle in front and the stored speed light up. Operating the on-board computer Overview Tachometer The red band in the tachometer indicates the engine's overrevving range. ! Do not drive in the overrevving range, as this could damage the engine. The fuel supply is interrupted to protect the engine when the red band is reached. The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using the buttons on the multifunction steering wheel. Outside temperature display The outside temperature display is in the multifunction display (Y page 196). G WARNING The outside temperature indicator is not designed to serve as an ice-warning device and is therefore unsuitable for that purpose. Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may still be icy, especially in wooded areas or on bridges. Changes in the outside temperature are displayed after a short delay. : Multifunction display ; To switch on the Voice Control System; see the separate operating instructions Speedometer with segments The segments in the speedometer indicate which speed range is available. Cruise control (Y page 159) activated: The segments light up from the stored speed to the maximum speed. DISTRONIC PLUS (Y page 161) activated: One or two segments in the set speed range light up. DISTRONIC PLUS detects a vehicle in front: = Right control panel ? Left control panel A Back button Z 195 On-board computer and displays Displays and operation On-board computer and displays 196 Displays and operation Left control panel = ; RCalls 9 : Press briefly: 9 : a up the menu and menu bar RScrolls through lists RSelects a submenu or function RIn the Audio menu: selects a stored station, an audio track or a video scene RIn the Tel (telephone) menu: switches to the phone book and selects a name or telephone number W X RAdjusts 8 RMute Back button % the Audio menu: selects the previous/next station or selects an audio track or a video scene using rapid scrolling RIn the Tel (telephone) menu: starts rapid scrolling through the phone book RConfirms a selection/display message the Tel (telephone) menu: switches to the telephone book and starts dialing the selected number RIn the Audio menu: stops the station search function at the desired station RIn Press briefly: RBack RSwitches off the Voice Control System RHides display messages or calls up the last Trip menu function used RExits the telephone book/redial memory Press and hold: RIn the volume % Press and hold: RCalls up the standard display in the Trip menu Multifunction display Values and settings as well as display messages are shown in the multifunction display. Right control panel ~ RRejects or ends a call phone book/redial memory RExits 6 RMakes or accepts a call RSwitches to the redial memory : Description field ; Menu bar = Drive program ? Outside temperature or speed (Y page 206) A Transmission position Displays and operation To show menu bar ;: press the = or ; button on the steering wheel. On-board computer and displays X 197 The following messages may appear in the multifunction display: XjY Parking Guidance (Y page 178) _ Adaptive Highbeam Assist (Y page 110) À ATTENTION ASSIST (Y page 182) à Lane Keeping Assist (Y page 185) or Active Lane Keeping Assist (Y page 190) HOLD HOLD function (Y page 172) Ä PRE-SAFE® Brake (Y page 65) Z On-board computer and displays 198 Menus and submenus Menus and submenus Menu overview The number of menus shown depends on the optional equipment in the vehicle. Function : Trip menu (Y page 199) ; Navi menu (navigation details) (Y page 200) = Audio menu (Y page 201) ? Tel menu (telephone) (Y page 202) A DriveAssist menu (assistance) (Y page 204) B Serv. menu (Y page 206) Rcalls up display messages (Y page 213) Rtire pressure loss warning system (Canada only) (Y page 317) Rtire pressure monitor (Y page 319) RASSYST PLUS service interval display (Y page 282) C Sett. menu (Y page 206) D AMG menu in AMG vehicles (Y page 210) The Audio and Tel menus differ slightly in vehicles with an audio system and vehicles with COMAND. The examples given in this Operator's Manual apply to vehicles equipped with COMAND. Trip menu Standard display X Press and hold the % button on the steering wheel until the Trip menu with odometer : and trip odometer ; is shown. Trip computer "From start" or "From reset" The values in the From Start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated from the last time the submenu was reset (Y page 200). X Press the = or ; button on the steering wheel to select the Trip menu. X Press the 9 or : button to select From Start or From Reset. Rthe ignition has been switched off for more than four hours. hours have been exceeded. R9,999 miles have been exceeded. When 9,999 hours or 99,999 miles have been exceeded, the trip computer is automatically reset From Reset. R999 Displaying the range and current fuel consumption X Press the = or ; button on the steering wheel to select the Trip menu. X Press the 9 or : to select the current fuel consumption16 and the approximate range. The approximate range that can be covered depends on the fuel level and your current driving style. If there is only a small amount of fuel left in the fuel tank, the display shows a vehicle being refueled C instead of the range. Digital speedometer X Trip computer "From start" (example) : Distance Press the = or ; button on the steering wheel to select the Trip menu. X Press 9 or : to select the digital speedometer. ; Time = Average speed ? Average fuel consumption The From Start trip computer is reset automatically if: : Digital speedometer 16 Not AMG vehicles. Z 199 On-board computer and displays Menus and submenus Menus and submenus On-board computer and displays 200 Resetting values Route guidance inactive You can reset the values of the following functions: RTrip odometer computer "From start" RTrip computer "From reset" X Press the = or ; button on the steering wheel to select the Trip menu. X Press the 9 or : button to select the function that you wish to reset. X Press a. RTrip : Direction of travel ; Current road Route guidance active No change of direction announced Resetting the trip computer "From start" (example) X Press : to select Yes and press a to confirm. : Distance to the destination ; Distance to the next change of direction = Current road Navigation system menu Displaying navigation instructions In the Navi menu, the multifunction display shows navigation instructions. For more information, see the separate operating instructions. X Switch on COMAND (see the separate operating instructions). X Press the = or ; button on the steering wheel to select the Navi menu. ? Symbol for "follow the road's course" Change of direction announced without a lane recommendation : Road into which the change of direction leads ; Distance to change of direction and visual distance display = Current road ? Symbol for change of direction When a change of direction has been announced, you will see visual distance display ; next to the symbol for change of direction ?. This decreases in size as you approach the announced change of direction. Change of direction announced with a lane recommendation Lane recommendations are only displayed if the relevant data is available on the digital map. ROff Map or Off Mapped Road: the vehicle position is outside the area of the digital map (off-map position). RNo Route: no route could be calculated to the selected destination. Audio menu Selecting a radio station i SIRIUS XM satellite radio acts like a : Road into which the change of direction leads ; Distance to change of direction and visual distance display = Lane recommendation ? Symbol for change of direction On multi-lane roads, lane recommendation = may be shown for the next change of direction. Lanes may be added during a change of direction. normal radio. For more information on satellite radio operation, see the separate operating instructions. You can only change the waveband and store new stations using the audio system or COMAND. X Switch on the audio system or COMAND and select Radio (see the separate operating instructions). X Press the = or ; button on the steering wheel to select the Audio menu. : Waveband Lane recommendation display (example) : Uninterrupted lane ; New lane during a change of direction Other status indicators of the navigation system : you have reached the destination or an intermediate destination. RNew Route... or Calculating Route: a new route is being calculated. RO 17 If ; Station17 X To select a stored station: briefly press the 9 or : button. X To select a station from the station list: press and briefly hold the 9 or : button. X To select a station using station search18: press and briefly hold the 9 or : button. the station has been stored, the memory position will also be displayed. if no station list is received. 18 Only Z 201 On-board computer and displays Menus and submenus Menus and submenus On-board computer and displays 202 Operating audio player or audio media Audio data from various audio devices or media can be played, depending on the equipment installed in the vehicle. X Switch on the audio system or COMAND and select the audio device or medium (see the separate operating instructions). X Press the = or ; button on the steering wheel to select the Audio menu. CD changer display (example) : Current track X To select the next/previous track: briefly press the 9 or : button. X To select a track from the track list (rapid scrolling): press and hold the 9 or : button until the desired track has been reached. If you press and hold the 9 or : button, the rapid scrolling speed is increased. Not all audio devices or media support this function. If track information is stored on the audio device or medium, the multifunction display will show the number and name of the track. The current track does not appear in audio AUX mode (Auxiliary audio mode: external audio source connected). Video DVD operation X Switch on COMAND and select video DVD (see the separate operating instructions). X Press the = or ; button on the steering wheel to select the Audio menu. DVD changer display (example) : Current scene X To select the next or previous scene: briefly press the 9 or : button. X To select a scene from the scene list (rapid scrolling): press and hold the 9 or : button until the desired scene has been reached. Telephone menu Introduction You can establish a Bluetooth® connection to the audio system or to COMAND (see the separate operating instructions). G WARNING A driver's attention to the road must always be his/her primary focus when driving. For your safety and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a telephone call. If you choose to use the telephone while driving, please use the handsfree device and only use the telephone when weather, road and traffic conditions permit. Some jurisdictions prohibit the driver from using a mobile phone while driving a vehicle. Bear in mind that at a speed of just 30 mph (approximately 50 km/h ), your vehicle is covering a distance of 44 feet (approximately 14 m) every second. X Switch on the mobile phone and audio system or COMAND (see the separate operating instructions). X Press the = or ; button on the steering wheel to select the Tel menu. You will see one of the following display messages in the multifunction display: RTelephone Ready or the name of the network provider: the mobile phone has found a network and is ready to receive. RTelephone No Service: no network is available, or the mobile phone is searching for a network. Accepting a call If someone calls you when you are in the Tel menu, a display message appears in the multifunction display, for example: X Press the 6 button on the steering wheel to accept an incoming call. If you are not in the Tel menu, you can still accept a call. Rejecting or ending a call X Press the ~ button on the steering wheel. If you are not in the Tel menu, you can still reject or end a call. Dialing a number from the phone book If your mobile phone is able to receive calls, you can search for and dial a number from the phone book in the audio system or COMAND at any time. X Press the = or ; button on the steering wheel to select the Tel menu. X Press the 9, : or a button to call up the phone book. X Press the 9 or : button to select the desired name. To start scrolling rapidly, press and hold the 9 or : button for longer than one second. After a short time, the rapid scroll speeds up. Rapid scrolling stops when you release the button or reach the end of the list. X If only one telephone number is stored for a name: press the 6 or a button to start dialing. or X If there is more than one number for a particular name: press the 6 or a button to display the numbers. X Press the 9 or : button to select the number you want to dial. X Press the 6 or a button to start dialing. or X If you do not want to make a call: press the ~ or % button. Redialing The on-board computer saves the last names or numbers dialed in the redial memory. X Press the = or ; button on the steering wheel to select the Tel menu. X Press the 6 button to switch to the redial memory. X Press the 9 or : button to select the desired name or number. X Press the 6 or a button to start dialing. or X If you do not want to make a call: press the ~ or % button. Z 203 On-board computer and displays Menus and submenus On-board computer and displays 204 Menus and submenus Assistance menu Introduction Deactivating/activating ESP® G WARNING Under no circumstances should you deactivate ESP® when the ÷ ESP® warning lamp in the instrument cluster flashes. Proceed as follows: Rwhen In the DriveAssist. menu you can: the distance display Ractivate/deactivate ESP® Ractivate/deactivate PRE-SAFE® Brake Ractivate/deactivate ATTENTION ASSIST Ractivate/deactivate Blind Spot Assist or Active Blind Spot Assist Ractivate/deactivate Lane Keeping Assist or Active Lane Keeping Assist Rshow Showing the distance display This function is only available with DISTRONIC PLUS. X Press the = or ; button on the steering wheel to select the DriveAssist menu. X Press the 9 or : button to select Distance Display. X Press a. The DISTRONIC PLUS distance display (Y page 168) appears in the multifunction display. driving off, apply as little throttle as possible. Rwhile driving, ease up on the accelerator pedal. Radapt your speed to suit the prevailing road and weather conditions. Failure to observe these guidelines could cause the vehicle to skid. ESP® cannot prevent accidents resulting from excessive speed. Activating/deactivating ESP® on AMG vehicles (Y page 62). For further information about ESP®, see (Y page 61). X Start the engine. X Press = or ; on the steering wheel to select the Assist. menu. X Press the 9 or : button to select ESP. X Press the a button. X To deactivate: press a again. The å warning lamp in the instrument cluster comes on. G WARNING When the å ESP® OFF warning lamp is lit, ESP® is deactivated. If the ÷ ESP® warning lamp and the å ESP® OFF warning lamp remain lit, ESP® is not available due to a malfunction. When ESP® is deactivated or not operational, vehicle stability in standard driving maneuvers is reduced. Adapt your speed and driving to the prevailing road conditions and to the non-operating status of the ESP®. X To activate: press a again. The å warning lamp in the instrument cluster goes out. Activating/deactivating PRE-SAFE® Brake PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS. X Press the = or ; button on the steering wheel to select the DriveAssist menu. X Press 9 or : to select PRE-SAFE Brake. X Press a. The current selection is displayed. X To activate/deactivate: press a again. When PRE-SAFE® Brake (Y page 65) is activated, the multifunction display shows the Ä symbol as long as the HOLD function is not activated (Y page 172). Vehicles with Parking Guidance: if PARKTRONIC is activated and you are driving at a speed under 22 mph (35 km/h) the j symbol for Parking Guidance is displayed instead of the Ä symbol. Activating/deactivating ATTENTION ASSIST X Press the = or ; button on the steering wheel to select the DriveAssist menu. X Press the 9 or : button to select Attention Asst.. X Press a. The current selection is displayed. X To activate/deactivate: press a again. Activating/deactivating Blind Spot Assist You can use the Blind Spot Asst. function to activate or deactivate Blind Spot Assist (Y page 183) or Active Blind Spot Assist (Y page 187). X Press = or ; on the steering wheel to select the DriveAssist menu. X Press 9 or : to select Blind Spot Asst.. X Press a. If the function is activated, the monitored areas are shown in red in the multifunction display. X To activate/deactivate: press a again. Activating/deactivating Lane Keeping Assist You can use the Lane Keep. Asst. function to activate/deactivate Lane Keeping Assist (Y page 185) or Active Lane Keeping Assist (Y page 190). X Press the = or ; button on the steering wheel to select the DriveAssist menu. X Press the 9 or : button to select Lane Keep. Asst.. X Press a. If the function is activated, the road markings are shown in red in the multifunction display. X To activate/deactivate: press a again. If Lane Keeping Assist or Active Lane keeping Assist is activated, the multifunction display shows the à symbol when the ignition is switched on. When ATTENTION ASSIST (Y page 182) is activated, the À symbol appears in the multifunction display when the ignition is on. Z 205 On-board computer and displays Menus and submenus On-board computer and displays 206 Menus and submenus Service menu The selected unit of measurement for distance applies to: digital speedometer in the Trip menu odometer and the trip odometer Rthe trip computer Rthe current consumption and the range Rthe navigation instruction in the Navi menu RDISTRONIC PLUS RASSYST PLUS service interval display X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Instr. cluster submenu. X Press the a button to confirm. X Press the : or 9 button to select the Display Unit Speed-/Odometer function. You will see the selected setting: km or miles. X Press the a button to save the setting. Rthe Rthe In the Serv. menu you can: Rcall up display messages (Y page 213) Rrestart the tire pressure loss warning system (Canada only) (Y page 317) Rcheck the tire pressure electronically (Y page 319) Rcall up the service due date (Y page 282) Settings menu Introduction The Sett. menu can be used for: Rchanging the instrument cluster settings Rchanging the light settings Rchanging the vehicle settings Rchanging the convenience settings Rrestoring the factory settings Instrument cluster Selecting the unit of measurement for distance The Display Unit Speed-/Odometer: function allows you to choose whether certain displays appear in kilometers or miles. Selecting the permanent display function The Permanent Display: function allows you to choose whether the multifunction display always shows the outside temperature or the speed in km/h (USA) or mph (Canada). X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Instr. cluster submenu. X Press the a button to confirm. X Press the : or 9 button to select the Permanent display function. You will see the selected setting Outside Temperature or Speedometer [km/h]:. X Press the a button to save the setting. Lights Switching the daytime running lamps on/ off This function is not available in Canada. If you have activated the Day Lights function and the light switch is in the c or à position, the daytime running lamps are switched on automatically during the day when the engine is running. In the dark, the following also light up: Rthe low-beam headlamps parking lamps Rthe tail lamps Rthe license plate lamp Rthe side marker lamps X Press the = or ; button on the steering wheel to select the Sett. menu. X Press the : or 9 button to select the Lights submenu. X Press the a button to confirm. X Press the : or 9 button to select the Day Lights function. If the Daytime Running Lights: function has been switched on, the cone of light and the W symbol in the multifunction display are shown in red. X Press the a button to save the setting. Rthe Switching Adaptive Highbeam Assist on/ off X Press the = or ; button on the steering wheel to select the Sett. menu. X Press the : or 9 button to select the Lights submenu. X Press the a button to confirm. X Press : or 9 to select the Adapt. Highbeam function. If the Adapt. Highbeam function has been switched on, the cone of light and the _ symbol in the multifunction display are shown in red. X Press the a button to save the setting. Activating/deactivating surround lighting and exterior lighting delayed switch-off If you have activated the Surround Lighting function and the light switch is in the c or à position, the following functions are active when it is dark: RSurround lighting: the exterior lighting remains lit for 40 seconds after unlocking with the SmartKey. The exterior lighting switches off when you open the driver's door. RExterior lighting delayed switch-off: the exterior lighting remains lit for 60 seconds after the engine has been switched off. If you close all the doors, the exterior lighting goes off after 15 seconds. If you activate the Surround Lighting function, the following light up depending on the vehicle's equipment: Rthe parking lamps Rthe fog lamps Rthe daytime running lamps Rthe side marker lamps Rthe surround lighting in the exterior mirrors X Press the = or ; button on the steering wheel to select the Sett. menu. X Press the : or 9 button to select the Lights submenu. X Press the a button to confirm. X Press the : or 9 button to select the Surround lighting function. When the Surround Lighting function is activated, the light cone and the area around the vehicle are displayed in red in the multifunction display. X Press the a button to save the setting. Z 207 On-board computer and displays Menus and submenus Menus and submenus On-board computer and displays 208 Deactivating delayed switch-off of the exterior lighting temporarily: X Before leaving the vehicle, turn the SmartKey to position 0 in the ignition lock. X Turn the SmartKey to position 2 in the ignition lock and back to position 0. The exterior lighting delayed switch-off is deactivated. Delayed switch-off of the exterior lighting is reactivated the next time you start the engine. Activating/deactivating the interior lighting delayed switch-off If you activate the Light. delay function, the interior lighting remains on for 20 seconds after you remove the SmartKey from the ignition lock. X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Lights submenu. X Press the a button to confirm. X Press the : or 9 button to select the Light. Delay function. When the Light. Delay function is activated, the vehicle interior is displayed in red in the multifunction display. X Press the a button to save the setting. Vehicle Activating/deactivating the automatic door locking feature If you select the Auto. Door Locks function, the vehicle is centrally locked above a speed of around 9 mph (15 km/h). i For further information on the automatic locking feature, see (Y page 78). X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Vehicle submenu. X Press the a button to confirm. X Press the : or 9 button to select the Auto. Door Locks function. When the Auto. Door Locks function is activated, the vehicle doors are displayed in red in the multifunction display. X Press the a button to save the setting. Activating/deactivating the acoustic locking verification signal If you activate the Acoustic Lock function, an audible signal sounds depending on the vehicle's date of manufacture: Rwhen locking or Ronce when unlocking and three times when locking X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Vehicle submenu. X Press the a button to confirm. X Press the : or 9 button to select the Acoustic Lock function. If the Acoustic Lock function is activated, the & symbol in the multifunction display lights up red. X Press the a button to save the setting. Activating/deactivating the radar sensor system The following systems are switched off when the radar sensor system is deactivated: PLUS (Y page 161) PLUS (Y page 60) RPRE-SAFE® Brake (Y page 65) RDISTRONIC RBAS RBlind Spot Assist (Y page 183) Blind Spot Assist (Y page 187) RActive i USA only: This device has been approved by the FCC as a "Vehicular Radar System". The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user's authority to operate the equipment. i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Vehicle submenu. X Press the a button to confirm. X Press the 9 or : button to select Radar Sensor (See Oper. Manual):. You will see the selected setting: Enabled or Disabled. X Press the a button to save the setting. Convenience Activating/deactivating the EASYENTRY/EXIT feature You can use the Easy Entry/Exit: function to activate or deactivate the EASY ENTRY/ EXIT feature (Y page 100). G WARNING You must make sure no one can become trapped or injured by the moving steering wheel when the easy-entry/exit feature is activated. To stop steering wheel movement, move steering wheel adjustment lever or press one of the memory position buttons. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could open the driver's door and unintentionally activate the easy-entry/exit feature, which could result in an accident and/or serious personal injury. X Press the = or ; button on the steering wheel to select the Sett. menu. X Press the : or 9 button to select the Convenience submenu. X Press the a button to confirm. X Press the : or 9 button to select the Easy Entry/Exit function. If the Easy Entry/Exit function is activated, the vehicle steering wheel is displayed in red in the multifunction display. X Press the a button to save the setting. Switching the fold-in mirrors when locking function on/off This function is only available in Canada. If you switch on the Auto. Mirror Folding function, the exterior mirrors fold in when you lock the vehicle. If you unlock the vehicle and then open the driver's or frontpassenger door, the exterior mirrors fold out again. If you have switched the function on and you fold the exterior mirrors in using the button on the door (Y page 101), they will not fold out automatically. The exterior mirrors can then only be folded out using the button on the door. Z 209 On-board computer and displays Menus and submenus Menus and submenus On-board computer and displays 210 X Press the = or ; button on the steering wheel to select the Sett. menu. X Press the : or 9 button to select the Convenience submenu. X Press the a button to confirm. X Press the : or 9 to select the Auto. Mirror Folding function. If the Auto. Mirror Folding function is activated, the vehicle's exterior mirror is displayed in red in the multifunction display. X Press the a button to save the setting. Resetting to factory settings For safety reasons, the Day Lights function in the Lights submenu is only reset when the vehicle is stationary. X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Factory Setting submenu. X Press the a button to confirm. The Reset All Settings? message appears. X Press the : or 9 button to select No or Yes. X Press the a button to confirm the selection. If you select Yes, the multifunction display shows a confirmation message. : Digital speedometer ; Gear indicator = Upshift indicator ? Engine oil temperature A Coolant temperature Upshift indicator UP = indicates that the engine has reached the overrevving range when in the manual gearshift program. Upshift indicator UP = fades out other messages until you have shifted up. When the engine oil temperature is below 80 †, the oil temperature is shown in blue. Avoid driving at full engine output during this time. SETUP SETUP shows the drive program, the ESP® (Electronic Stability Program) mode and the SPORT handling mode. X Press = or ; on the steering wheel to select the AMG menu. X Press the 9 button repeatedly until SETUP is displayed. AMG menu in AMG vehicles AMG displays X Press = or ; on the steering wheel to select the AMG menu. : Drive program (C/S/S+/M) ; ESP® mode (ON/OFF) or SPORT handling mode (SPORT) RACETIMER Displaying and starting RACETIMER G WARNING The RACETIMER feature is only for use on roads and in conditions where high speed driving is permitted. Racing on public roads is prohibited under all circumstances. The driver is and must always remain responsible for following posted speed limits. X Press = or ; to select Interm. Time. X Press the a button to confirm. The intermediate time is displayed for five seconds. Starting a new lap It is possible to store a maximum of sixteen laps. X Press a to confirm New Lap. You can use the RACETIMER to store lap times. X Press = or ; on the steering wheel to select the AMG menu. X Press the 9 button repeatedly until the RACETIMER is shown. i If RACETIMER is selected, the menu bar cannot be called up with the = and ; buttons. : RACETIMER ; Fastest lap time (best lap) = Lap Stopping the RACETIMER X Press the % button on the steering wheel. : Lap ; RACETIMER You can start the RACETIMER when the engine is running or if the SmartKey is in position 2 in the ignition lock. X To start: press the a button to start the RACETIMER. Displaying the intermediate time X Press a to confirm YES. The RACETIMER interrupts timing when you stop the vehicle and turn the SmartKey to position 1 in the ignition lock. When you turn the SmartKey to position 2 or 3 and then press the a to confirm Start, timing is continued. Resetting the current lap Stop the RACETIMER. X Press = or ; to select Reset Lap. X Press a to reset the lap time to "0”. X Z 211 On-board computer and displays Menus and submenus Menus and submenus On-board computer and displays 212 Deleting all laps If you switch off the engine, the RACETIMER is reset to "0" after 30 seconds. All laps are deleted. You cannot delete individual stored laps. If you have stopped 16 laps, the current lap does not have to be reset. X Reset the current lap. X Press a to confirm Reset. Reset Race Timer? appears in the multifunction display. Lap evaluation X : Lap Press the : button to select Yes and press the a button to confirm. All laps are deleted. Overall evaluation This function is shown if you have stored at least one lap and stopped the RACETIMER. X Press = or ; on the steering wheel to select the AMG menu. X Press the 9 button repeatedly until the overall evaluation is shown. : RACETIMER overall evaluation ; Total time driven = Average speed ? Distance covered A Top speed This function is only available if you have stored at least two laps and have stopped the RACETIMER. X Press = or ; on the steering wheel to select the AMG menu. X Press the 9 button repeatedly until the lap evaluation is shown. Each lap is shown in a separate submenu. The fastest lap is indicated by flashing symbol :. ; Lap time = Average lap speed ? Lap length A Top speed during lap X Press the 9 or : button to select a different lap evaluation. Display messages General notes G WARNING All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz Center. Failure to repair the condition noted may cause damage not covered by the Mercedes-Benz Limited Warranty, or result in property damage or personal injury. Display messages appear in the multifunction display. Display messages with graphic displays may be shown in simplified form in the Operator's Manual and may differ from the messages shown in the multifunction display. Please respond in accordance with the display messages and follow the additional notes in this Operator's Manual. Certain display messages are accompanied by an audible warning tone or a continuous tone. When you stop and park the vehicle, please observe the notes on the HOLD function (Y page 172) and parking (Y page 153). Hiding display messages You can hide some display messages with a low priority. X Press the a or % button on the steering wheel to hide the display message. The display message is cleared. Display messages with a high priority are shown in red. You cannot hide display messages of the highest priority. The multifunction display shows these messages continuously until the causes for the messages have been remedied. Message memory The message memory allows you to call up previous display messages. X Press = or ; on the steering wheel to select the Serv. menu. If there are display messages, the multifunction display shows 2 Messages, for example. X Press the 9 or : button to select the entry, e.g. 2 Messages. X Confirm with a. X Press the 9 or : button to scroll through the display messages. When the ignition is switched off, all display messages are deleted apart from some highpriority display messages. Once the causes of the high-priority display messages have been rectified, the corresponding display messages are also deleted. Z 213 On-board computer and displays Display messages On-board computer and displays 214 Display messages Safety systems Display messages !÷ Currently Unavailable See Operator's Manual Possible causes/consequences and M Solutions G Risk of accident ABS (Anti-lock Braking System), ESP® (Electronic Stability Program), BAS (Brake Assist), the HOLD function and hill start assist are temporarily unavailable. BAS PLUS and PRE-SAFE® Brake may also have failed. In addition, the ÷, å and ! warning lamps light up in the instrument cluster. The self-diagnosis function might not be complete, for example. ATTENTION ASSIST is deactivated. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. X Carefully drive a suitable distance making slight steering movements at a speed above 12 mph (20 km/h). If the display message disappears, the functions mentioned above are available again. If the display message continues to be displayed: X X Drive on carefully. Visit a qualified specialist workshop. G Risk of accident ABS, ESP®, BAS, the HOLD function and hill start assist are temporarily unavailable. BAS PLUS and PRE-SAFE® Brake may also have failed. In addition, the ÷, å and ! warning lamps light up in the instrument cluster. For example, the on-board voltage may be insufficient. ATTENTION ASSIST is deactivated. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. X Drive on carefully. If the display message disappears, the functions mentioned above are available again. If the display message continues to be displayed: X X Drive on carefully. Visit a qualified specialist workshop. Display messages !÷ Inoperative See Operator's Manual ÷ Currently Unavailable See Operator's Manual Possible causes/consequences and M Solutions G Risk of accident ABS, ESP®, BAS, the HOLD function and hill start assist are unavailable due to a malfunction. BAS PLUS and PRE-SAFE® Brake may also have failed. The $ (USA only)/ J (Canada only), ÷, å and ! warning lamps in the instrument cluster also light up. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. ATTENTION ASSIST is deactivated. X Drive on carefully. X Visit a qualified specialist workshop immediately. G Risk of accident ESP®, BAS, the HOLD function and hill start assist are temporarily unavailable. BAS PLUS and PRE-SAFE® Brake may also have failed. In addition, the ÷ and å warning lamps light up in the instrument cluster. The self-diagnosis function might not be complete, for example. ATTENTION ASSIST is deactivated. The brake system continues to function normally, but without the functions listed above. X Carefully drive a suitable distance making slight steering movements at a speed above 12 mph (20 km/h). If the display message disappears, the functions mentioned above are available again. If the display message continues to be displayed: X X Drive on carefully. Visit a qualified specialist workshop. Z 215 On-board computer and displays Display messages 216 Display messages On-board computer and displays Display messages ÷ Inoperative See Operator's Manual T! ÷ Inoperative See Operator's Manual # Check Brake Pad Wear $(USA only)J(Canada only) Release Parking Brake Possible causes/consequences and M Solutions G Risk of accident ESP®, BAS, the HOLD function and hill start assist are unavailable due to a malfunction. BAS PLUS and PRE-SAFE® Brake may also have failed. In addition, the ÷ and å warning lamps light up in the instrument cluster. ATTENTION ASSIST is deactivated. The brake system continues to function normally, but without the functions listed above. X Drive on carefully. X Visit a qualified specialist workshop. G Risk of accident EBD (electronic brake force distribution), ABS, ESP®, BAS, the HOLD function and hill start assist are unavailable due to a malfunction. BAS PLUS and PRE-SAFE® Brake may also have failed. In addition, the ÷, å and ! warning lamps light up in the instrument cluster and a warning tone sounds. ATTENTION ASSIST is deactivated. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. X Drive on carefully. X Visit a qualified specialist workshop immediately. The brake pads/linings have reached their wear limit. X Visit a qualified specialist workshop. You are driving with the parking brake applied. A warning tone also sounds. X Release the parking brake. Display messages Possible causes/consequences and M Solutions $(USA only)J(Canada A malfunction has occurred while the HOLD function or DISTRONIC PLUS is active. A tone may also sound at regular intervals. The tone becomes louder if you attempt to lock the vehicle. You cannot start the engine. X Paying attention to the traffic situation, immediately depress the brake pedal firmly and hold until the display message disappears. X Prevent the vehicle from rolling away before you leave it (Y page 294). You can restart the engine. only) Brake Immediately $(USA only)J(Canada only) Check Brake Fluid Level G Risk of accident There is not enough brake fluid in the brake fluid reservoir. Additionally, the red $ (USA only)/ J (Canada only) warning lamp lights up in the instrument cluster and a warning tone sounds. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not continue driving under any circumstances. X Engage the parking brake. X Consult a qualified specialist workshop. X Do not add brake fluid. This will not rectify the malfunction. G WARNING Driving with the message Check Brake Fluid Level displayed can result in an accident. Have your brake system checked immediately. Do not add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. You can be seriously burned. Z 217 On-board computer and displays Display messages 218 Display messages On-board computer and displays Display messages Possible causes/consequences and M Solutions G USA only: one or more of the main functions in the mbrace system are malfunctioning. Canada only: one or more of the main functions of the TELEAID system are malfunctioning. X USA only: have the mbrace system checked at a qualified specialist workshop. X Canada only: have the TELEAID system checked at a qualified specialist workshop. Tele Aid Inoperative PRE-SAFE Function Currently Limited See Oper. Manual G Risk of accident PRE-SAFE® Brake is temporarily inoperative if: Rthe DISTRONIC PLUS cover in the radiator grill is dirty. sensors in the bumpers are dirty. Rits function is impaired due to heavy rain or snow. Rthe radar sensor system is temporarily inoperative, e.g. due to electromagnetic radiation emitted by nearby TV or radio stations or other sources of electromagnetic radiation. Ryou switch off ESP® (AMG vehicles only). Rthe system is outside the operating temperature range. Rthe on-board voltage is too low. PRE-SAFE® Brake is operational again and the display message disappears if: Rthe Rthe dirt (e.g. slush) drops away while the vehicle is in motion. system detects that the sensors are fully available again. Ryou switch ESP® on again (AMG vehicles only). Rthe system is within the operating temperature range. If the display message continues to be displayed: Rthe X Clean the DISTRONIC PLUS cover in the radiator grill (Y page 287). X Clean the bumpers (Y page 287). X Restart the engine. X Wait until the battery is sufficiently charged. PRE-SAFE Functions Limited See Operator's Manual G Risk of accident PRE-SAFE® Brake is defective. BAS PLUS or the distance warning signal may also have failed. X Visit a qualified specialist workshop. Display messages 6 SRS Malfunction Service Required Possible causes/consequences and M Solutions G Risk of injury There is a malfunction in the SRS (Supplemental Restraint System). The 6 warning lamp also lights up in the instrument cluster. X Visit a qualified specialist workshop. 6 G Risk of injury 6 G Risk of injury 6 G Risk of injury SRS has malfunctioned at the front on the left or right. The 6 Front Left warning lamp also lights up in the instrument cluster. Malfunction Service Required or X Visit a qualified specialist workshop. Front Right Malfunction Service Required SRS has malfunctioned at the rear on the left or right. The 6 Rear Left warning lamp also lights up in the instrument cluster. Malfunction Service Required or X Visit a qualified specialist workshop. Rear Right Malfunction Service Required Rear Center SRS Malfunction Service Required 6 SRS has malfunctioned at the rear center. The 6 warning lamp also lights up in the instrument cluster. X Visit a qualified specialist workshop. G Risk of injury There is a malfunction in the left-hand and/or right-hand window Left Side Curtain Airbag Malfunction curtain air bag. The 6 warning lamp also lights up in the Service Required or instrument cluster. Right Side Curtain X Visit a qualified specialist workshop. Airbag Malfunction Service Required G WARNING In the event a malfunction of the SRS is indicated as outlined above, the SRS may not be operational. For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked. Otherwise the SRS may not be activated when needed in an accident, which could result in serious or fatal injury, or it might deploy unexpectedly and unnecessarily which could also result in injury. Z 219 On-board computer and displays Display messages 220 Display messages On-board computer and displays Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator's Manual The front-passenger air bag is enabled during the journey, even though: Ra child, a small adult or an object weighing less than the system's weight threshold is located on the front-passenger seat. Rthe front-passenger seat is unoccupied. The system may detect objects or forces applying additional weight on the seat. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Engage the parking brake. X Switch off the ignition. X Open the front-passenger door. X Remove the child and the child restraint system from the frontpassenger seat. X If necessary, secure the child in a child restraint system on a suitable rear seat. X Make sure that there are no objects on the seat adding to the weight. The system may otherwise detect the additional weight and interpret the seat occupant's weight as greater than it actually is. X Keep the seat unoccupied, close the front-passenger door and switch on the ignition. Observe the 45(Y page 42) indicator lamp and the multifunction display and check the following: Seat unoccupied and ignition switched on: Rthe 45 indicator lamp must light up and remain lit. When the indicator lamp is on, OCS (Y page 42) has deactivated the front-passenger air bag. Rthe Front Passenger Airbag Enabled See Operator's Manual or Front Passenger Airbag Disabl'd See Operator's Manual display messages must not appear in the multifunction display. Wait for a period of at least 60 seconds until the necessary system checks have been completed and to make sure that the display messages do not appear in the multifunction display. If these conditions are fulfilled, the front-passenger seat can be occupied again. Whether the 45 indicator lamp remains lit or goes out depends on how OCS classifies the occupant. If the conditions are not fulfilled, the system is not operating correctly. Display messages Possible causes/consequences and M Solutions X Visit a qualified specialist workshop immediately. G WARNING If the 45 indicator lamp remains off even after performing the above corrective steps, do not have any children 12 years old and under and other small individuals use the front-passenger seat until the system has been repaired. Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Disabl'd See Operator's Manual The front-passenger air bag is deactivated during the journey even though an adult or a person larger than a certain size is occupying the front-passenger seat. If additional forces are applied to the seat, the system may interpret the occupant's weight as lower than it actually is. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Engage the parking brake. X Switch off the ignition. X Have the occupant get out of the vehicle. X Keep the seat unoccupied, close the front-passenger door and switch on the ignition. Observe the 45(Y page 42) indicator lamp and the multifunction display and check the following: Seat unoccupied and ignition switched on: Rthe 45 indicator lamp must light up and remain lit. When the indicator lamp is on, OCS (Y page 42) has deactivated the front-passenger air bag. Rthe Front Passenger Airbag Enabled See Operator's Manual or Front Passenger Airbag Disabled See Operator's Manual display messages must not appear in the multifunction display. Wait for a period of at least 60 seconds until the necessary system checks have been completed and to make sure that the display messages do not appear in the multifunction display. If these conditions are fulfilled, the front-passenger seat can be occupied again. Whether the 45 indicator lamp remains lit or goes out depends on how OCS classifies the occupant. If the conditions are not fulfilled, the system is not operating correctly. X Visit a qualified specialist workshop immediately. Z 221 On-board computer and displays Display messages On-board computer and displays 222 Display messages G WARNING If the 45 indicator lamp remains lit with an adult occupant on the front-passenger seat even after performing the above corrective steps, do not have any passenger use the frontpassenger seat until the system has been repaired. Lights i Display messages about LEDs: This display message will only appear if all LEDs have failed. Display messages Possible causes/consequences and M Solutions b The left or right-hand cornering light is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. Check Left Cornering Light or Check Right Cornering Light b Check Left Low Beam or Check Right Low Beam b Check Rear Left Turn Signal or Check Rear Right Turn Signal b Check Front Left Turn Signal or Check Front Right Turn Signal The left or right-hand low-beam headlamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The rear left-hand or rear right-hand turn signal is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The front left-hand or front right-hand turn signal is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. Display messages Possible causes/consequences and M Solutions b The turn signal in the left-hand or right-hand exterior mirror is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. Check Left Mirror Turn Signal or Check Right Mirror Turn Signal b Check Center Brake Lamp b Check Left Tail and Brake Lamps or Check Right Tail and Brake Lamps b Check Left High Beam or Check Right High Beam b Check Left Fog Lamp or Check Right Fog Lamp b Rear Fog Lamp The high-mounted brake lamp is faulty. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The left or right-hand tail lamp/brake lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The left or right-hand high beam is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The left-hand or right-hand front fog lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The rear fog lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. Z 223 On-board computer and displays Display messages 224 Display messages On-board computer and displays Display messages Possible causes/consequences and M Solutions b The front left or front right parking or standing lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. Check Front Left Parking Lamp or Check Front Right Parking Lamp b Backup Light b Check Front Left Sidemarker Lamp or Check Front Right Sidemarker Lamp b Check Rear Left Sidemarker Lamp or Check Rear Right Sidemarker Lamp b Check Left Daytime Running Light or Check Right Daytime Running Light b Active Headlamps Inoperative b Malfunction See Operator's Manual The backup lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The left or right front side marker lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The rear left or right side marker lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The left or right-hand daytime running lamp is defective. X Check whether you are permitted to change the bulb yourself (Y page 113). or X Visit a qualified specialist workshop. The active light function is defective. X Visit a qualified specialist workshop. The exterior lighting is defective. X Visit a qualified specialist workshop. Display messages Possible causes/consequences and M Solutions b The light sensor is defective. X Visit a qualified specialist workshop. AUTO Lamp Function Inoperative b Switch Off Lights The lights are still switched on when you leave the vehicle. A warning tone also sounds. X Turn the light switch to c or Ã. Adaptive Highbeam Assist Inoperative Adaptive Highbeam Assist is faulty. X Visit a qualified specialist workshop. Adaptive Highbeam Assist Currently Unavailable See Operator's Manual Adaptive Highbeam Assist is deactivated and temporarily inoperative. Possible causes are: Rthe windshield in the camera's field of vision is dirty. is impaired due to heavy rain, snow or fog. X Clean the windshield. Rvisibility If the system detects that the camera is fully functional again, the Adaptive Highbeam Assist Now Available display message is shown. Adaptive Highbeam Assist is operational again. Engine Display messages Possible causes/consequences and M Solutions + The coolant level is too low. X Add coolant, observing the warning notes when doing so (Y page 280). X If coolant needs to be added more often than usual, have the engine coolant system checked at a qualified specialist workshop. Check Coolant Level See Operator's Manual 225 On-board computer and displays Display messages G WARNING Do not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn if it comes into contact with hot engine parts. You could be seriously burned. ! The coolant level is too low. Avoid making long journeys with too little coolant in the cooling system. The engine will otherwise be damaged. The display messages and the corresponding symbol that indicate that the coolant level is too low must not be ignored. Z 226 Display messages On-board computer and displays Display messages Possible causes/consequences and M Solutions ? The coolant is too hot. X Pull over and stop the vehicle safely and switch off the engine, paying attention to road and traffic conditions. X Make sure that the air supply to the engine radiator is not blocked, e.g. by snow, slush or ice. X Wait until the display message disappears before restarting the engine. Otherwise, there is a risk of engine damage. X Pay attention to the coolant temperature display. X If the temperature increases again, visit a qualified specialist workshop immediately. Coolant Level Low Stop Vehicle Turn Engine Off G WARNING Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an overheated engine can cause serious burns which can occur just by opening the engine hood. Stay away from the engine if you see or hear steam coming from it. Stop the vehicle in a safe location away from other traffic. Turn off the engine, get out of the vehicle and do not stand near the vehicle until the engine has cooled down. ! If the coolant temperature exceeds 248 ‡(120 †) do not continue driving. The engine will otherwise be damaged. Display messages Possible causes/consequences and M Solutions ? The engine fan is defective. X At coolant temperatures under 248 ‡ (120 † ), drive to the next qualified specialist workshop. X Avoid subjecting the engine to heavy loads, e.g. driving in mountainous terrain, and stop-and-go traffic. # The battery is not being charged. Possible causes are: Ra defective alternator torn poly-V-belt Ra malfunction in the electronics X Pull over and stop the vehicle safely and switch off the engine, paying attention to road and traffic conditions. X Open the hood. X Check whether the poly-V-belt is torn. Ra If the poly-V-belt is torn: ! Do not continue driving. The engine could otherwise overheat. X Consult a qualified specialist workshop. If the poly-V-belt is not damaged: X Visit a qualified specialist workshop. 4 Check Engine Oil At Next Refueling The oil level has dropped to the minimum level. A warning tone also sounds. X Check the oil level, at the latest when next refueling (Y page 279). X If necessary, add engine oil (Y page 279). X Have the engine checked at a qualified specialist workshop if engine oil needs to be added more often than usual. Information on approved engine oils can be obtained from any qualified specialist workshop or on the Internet at http://www.mbusa.com (USA only). ! The oil level is too low. Avoid long journeys with too little engine oil. There is a risk of engine damage. The display messages and the corresponding symbol that indicate that the oil level is too low must not be ignored. Z 227 On-board computer and displays Display messages 228 Display messages On-board computer and displays Display messages Possible causes/consequences and M Solutions 8 The fuel level has dropped into the reserve range. X Refuel at the nearest gas station. Fuel Level Low C There is only a very small amount of fuel in the fuel tank. X Refuel at the nearest gas station without fail. 8 The fuel system pressure is too low. The fuel filler cap is not closed correctly or the fuel system is leaking. X Check that the fuel filler cap is correctly closed. Gas Cap Loose If the fuel filler cap is not correctly closed: X Close the fuel filler cap. If the fuel filler cap is correctly closed: X Visit a qualified specialist workshop. Driving systems Display messages Possible causes/consequences and M Solutions À Based on specific criteria, ATTENTION ASSIST has determined that the driver is tired or paying less attention. A warning tone also sounds. X If necessary, take a break. Attention Assist: Pause! During long journeys, take regular breaks in good time so you get enough rest. À Attention Assist Inoperative HOLD Off ATTENTION ASSIST has failed. X Visit a qualified specialist workshop. The HOLD function is deactivated. The vehicle is skidding. A warning tone also sounds. X Reactivate the HOLD function later (Y page 172). The HOLD function is deactivated. When the brake pedal is firmly depressed, an activation condition is not fulfilled. A warning tone also sounds. X Check the activation conditions for the HOLD function (Y page 172). Display messages Possible causes/consequences and M Solutions Radar Sensors Deactivated See Operator's Manual The radar sensor system is deactivated. X Switch on the radar sensor system (Y page 208). Lane Keeping Assist Currently Unavailable. See Operator's Manual or Lane Keeping Assist Currently Unavailable. See Operator's Manual Lane Keeping Assist or Active Lane Keeping Assist is deactivated and temporarily inoperative if: Rthe windshield is dirty in the camera's field of vision. is impaired due to heavy rain, snow or fog. Rthere are no lane markings for a longer period. Rthe lane markings are worn, dark or covered, for example by dirt or snow. Lane Keeping Assist or Active Lane Keeping Assist is operational again and the display message disappears if: Rvisibility Rthe dirt (e.g. slush) drops away while the vehicle is in motion. Rthe system recognizes that the camera is fully operational again. If the display message continues to be displayed: X Lane Keeping Assist Inoperative or Active Lane Keeping Assist Inoperative Clean the windshield. Lane Keeping Assist or Active Lane Keeping Assist is defective. X Visit a qualified specialist workshop. Z 229 On-board computer and displays Display messages 230 Display messages On-board computer and displays Display messages Possible causes/consequences and M Solutions Blind Spot Assist Currently Unavailable See Operator's Manual or Active Blind Spot Assist Currently Unavailable See Operator's Manual Blind Spot Assist or Active Blind Spot Assist is temporarily inoperative if: Rthe sensors are dirty. function is impaired due to heavy rain or snow. Rthe radar sensor system is outside the operating temperature range. Rthe radar sensor system is temporarily inoperative, e.g. due to electromagnetic radiation emitted by nearby TV or radio stations or other sources of electromagnetic radiation. The yellow 9 indicator lamps also light up in the exterior mirrors. Blind Spot Assist or Active Blind Spot Assist is operational again and the display message disappears if: Rthe dirt (e.g. slush) drops away while the vehicle is in motion. Rthe system detects that the sensors are fully available again. Rthe radar sensor system is back within the operating temperature range. If the display message continues to be displayed: Rits X X Clean the sensors (Y page 287). Restart the engine. Blind Spot Assist Inoperative or Active Blind Spot Assist Inoperative Blind Spot Assist or Active Blind Spot Assist is defective. The yellow 9 indicator lamps also light up in the exterior mirrors. X Visit a qualified specialist workshop. Parking Guidance Inoperative Parking Guidance is malfunctioning (Y page 178). X Restart the engine. If the display message continues to be displayed: X Visit a qualified specialist workshop. Display messages Possible causes/consequences and M Solutions Parking Guidance Canceled Parking Guidance has been deactivated because: Rthe vehicle is skidding. sensors are dirty. Ra malfunction has occurred. A warning tone also sounds. X Reactivate Parking Guidance later (Y page 178). Rthe If the parking space symbol is not displayed in the multifunction display when you are driving at a speed of less than 19 mph (30 km/h): X Clean the sensors (Y page 287). X Restart the engine. If the parking space symbol is still not displayed in the multifunction display when you are driving at a speed of less than 19 mph (30 km/h): X Visit a qualified specialist workshop. Parking Guidance has been deactivated because you are no longer following the recommended path. X Park again and, while doing so, observe the display messages in the multifunction display. Parking Guidance Finished The vehicle is parked. A warning tone also sounds. The display message disappears automatically. DISTRONIC PLUS Off DISTRONIC PLUS has been deactivated (Y page 161). If it was deactivated automatically, a warning tone also sounds. DISTRONIC PLUS Now Available DISTRONIC PLUS is operational again after having been temporarily unavailable. You can now reactivate DISTRONIC PLUS (Y page 161). Z 231 On-board computer and displays Display messages 232 Display messages On-board computer and displays Display messages Possible causes/consequences and M Solutions DISTRONIC PLUS Currently Unavailable See Operator's Manual DISTRONIC PLUS is deactivated and is temporarily inoperative if: Rthe DISTRONIC PLUS cover in the radiator grill is dirty. function is impaired due to heavy rain or snow. Rthe sensors in the bumpers are dirty. Rthe radar sensor system is temporarily inoperative, e.g. due to electromagnetic radiation emitted by nearby TV or radio stations or other sources of electromagnetic radiation. Rthe system is outside the operating temperature range. Rthe on-board voltage is too low. A warning tone also sounds. DISTRONIC PLUS is operational again and the display message disappears if: Rits Rthe dirt (e.g. slush) drops away while the vehicle is in motion. system detects that the sensors are fully available again. Rthe system is within the operating temperature range. If the display message continues to be displayed: Rthe X Clean the DISTRONIC PLUS cover in the radiator grill (Y page 287). X Clean the bumpers (Y page 287). X Restart the engine. DISTRONIC PLUS Inoperative DISTRONIC PLUS is defective. BAS PLUS (Brake Assist PLUS) and PRE-SAFE® Brake may be inoperative as well. A warning tone also sounds. X Visit a qualified specialist workshop. DISTRONIC PLUS Override You have depressed the accelerator pedal. DISTRONIC PLUS is no longer controlling the speed of the vehicle. X Take your foot off the accelerator pedal. DISTRONIC PLUS --- mph An activation condition for DISTRONIC PLUS is not fulfilled. X Check the activation conditions for DISTRONIC PLUS (Y page 161). Display messages Possible causes/consequences and M Solutions Cruise Control Inoperative Cruise control is defective. A warning tone also sounds. X Visit a qualified specialist workshop. Cruise Control --- mph A condition for activating cruise control has not been fulfilled. You attempted to save a speed of less than 20 mph (30 km/h). X If the situation allows, drive faster than 20 mph (30 km/h) and save the speed. X Check the activation conditions for cruise control (Y page 159). Tires G WARNING Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle. You may lose control of the vehicle. Continued driving with a flat tire will cause excessive heat build-up and possibly a fire. G WARNING Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires. Overinflated tires can adversely affect handling and ride comfort, wear unevenly, increase stopping distance, and result in sudden deflation (blowout) because they are more likely to become punctured or damaged by road debris, potholes etc. Z 233 On-board computer and displays Display messages 234 Display messages On-board computer and displays Display messages Check Tire Pressure Soon Possible causes/consequences and M Solutions G Risk of accident The tire pressure loss warning system has detected a significant loss in pressure. A warning tone also sounds. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so. X Check the tires and, if necessary, change the wheel (Y page 334). X Check the tire pressures and, if necessary, set to the correct tire pressure. X Restart the tire pressure loss warning system when the tire pressure is correct (Y page 317). Check Tire Pressure The tire pressure loss warning system generated a display message and has not been restarted since. Then Restart Run Flat Indicator X Set the correct tire pressure in all four tires. X Restart the tire pressure loss warning system (Y page 317). Run Flat Indicator Inoperative The tire pressure loss warning system is defective. X Visit a qualified specialist workshop. Tire pressures will be displayed after driving a few minutes The tire pressure monitor is measuring the tire pressure. X Drive on. The tire pressures appear in the multifunction display after you have been driving for a few minutes. Tire Press. Monitor The tire pressure monitor is defective. Inoperative X Visit a qualified specialist workshop. Tire Press. Monitor The wheels mounted do not have a suitable tire pressure sensor. The tire pressure monitor is deactivated. Inoperative No Wheel Sensors X Mount wheels with suitable tire pressure sensors. The tire pressure monitor is activated automatically after driving for a few minutes. Display messages Check Tires Caution: Tire Malfunction Possible causes/consequences and M Solutions G Risk of accident The tire pressure in one or more tires has dropped significantly. The wheel position is displayed in the multifunction display. A warning tone also sounds. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so. X Correct the tire pressure (Y page 319). X If necessary, change a wheel (Y page 334). G Risk of accident The tire pressure in one or more tires has dropped suddenly. The wheel position is displayed in the multifunction display. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so. X If necessary, change a wheel (Y page 334). Correct Tire Pressure The tire pressure is too low in at least one of the tires or the tire pressure difference between the wheels is too great. X Check the tire pressures at the next opportunity. If necessary, correct the tire pressure (Y page 319). X Restart the tire pressure monitor (Y page 321). Tire Press. Sensor(s) Missing There is no signal from the tire pressure sensor of one or several wheels. The pressure of the affected tire is not displayed in the multifunction display. X Have the defective tire pressure sensor replaced at a qualified specialist workshop. Tire Press. Monitor Due to a source of radio interference, no signals can be received Currently Unavail. from the wheel sensors. The tire pressure monitor is temporarily malfunctioning. X Drive on. The tire pressure monitor restarts automatically as soon as the problem has been solved. h Tire Press. Warning Caution Tire Malfunction G Risk of accident The tire pressure in one or more tires has dropped suddenly. A warning tone also sounds. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so. X If necessary, change a wheel (Y page 334). Z 235 On-board computer and displays Display messages 236 Display messages On-board computer and displays Display messages h Possible causes/consequences and M Solutions G Risk of accident Check Tire Pressure The tire pressure in one or more tires has dropped significantly. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so. X If necessary, change a wheel (Y page 334). X Check the tire pressure. If necessary, correct the tire pressure (Y page 319). h Correct Tire Pressure The tire pressure is too low in at least one of the tires or the tire pressure difference between the wheels is too great. X Check the tire pressures at the next opportunity. If necessary, correct the tire pressure (Y page 319). Vehicle Display messages Possible causes/consequences and M Solutions Shift to 'P' or 'N' You have attempted to start the engine with the transmission in position R or D. to Start Engine X Shift the transmission to position P or N. P Shift to 'P' You have attempted to stop the engine with the Start/Stop button while the transmission was not in position P. X Shift the transmission to position P. While the HOLD function or DISTRONIC PLUS is active, you have: Ropened the driver's door and released the seat belt or off the engine or Ropened the hood A tone may also sound at regular intervals. The tone becomes louder if you attempt to lock the vehicle. You cannot start the engine. X Shift the transmission to position P. You can restart the engine. Rswitched N The trunk lid is open. X Close the trunk lid. Display messages M Possible causes/consequences and M Solutions G Risk of accident The hood is open. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Apply the parking brake. X Close the hood. C _ Rear Left Backrest Not Latched or Rear Right Backrest Not Latched D At least one door is open. X Close all the doors. G Risk of injury The backrest in the rear is not engaged on the left-hand and/or right-hand side. X Push the backrest back until it engages. G Risk of accident Power Steering Malfunction See Operator's Manual The power steering is malfunctioning. You will need to use more force to steer. A warning tone also sounds. X Check whether you are able to apply the extra force required. X If you are able to steer safely: carefully drive on to a qualified specialist workshop. X If you are unable to steer safely: do not drive on. Contact the nearest qualified specialist workshop. Phone No Service Your vehicle is outside the network provider's transmitter/ receiver range. X Wait until the mobile phone operational readiness symbol appears in the multifunction display. ¥ The washer fluid level in the washer fluid reservoir has dropped below the minimum. X Add washer fluid (Y page 281). Check Washer Fluid Z 237 On-board computer and displays Display messages On-board computer and displays 238 Display messages SmartKey Display messages Possible causes/consequences and M Solutions  You have put the wrong SmartKey in the ignition lock. X Use the correct SmartKey. Key Does Not Belong to Vehicle  Take Your Key from Ignition  Obtain a New Key  Replace Key Battery  Don't Forget Your Key  Key Not Detected (red display message) The SmartKey is in the ignition lock. X Remove the SmartKey. The SmartKey needs to be replaced. X Visit a qualified specialist workshop. The batteries of the KEYLESS-GO key are discharged. X Change the batteries (Y page 74). The display message is shown for a maximum of 60 seconds and is only a reminder. You have opened the driver's door with the engine switched off. The KEYLESS-GO key is not in the ignition lock. X Remember to take the KEYLESS-GO key with you when you leave the vehicle. The KEYLESS-GO key is not in the vehicle. A warning tone also sounds. If the engine is switched off, you can no longer lock the vehicle centrally or start the engine. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Apply the parking brake. X Locate the KEYLESS-GO key. The KEYLESS-GO key is not detected while the engine is running because there is interference from a strong source of radio waves. A warning tone also sounds. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Engage the parking brake. X Operate the vehicle with the SmartKey in the ignition lock. Display messages Possible causes/consequences and M Solutions  The KEYLESS-GO key cannot be detected at present. X Change the location of the key with the KEYLESS-GO functions in the vehicle. Key Not Detected (White display message) If the KEYLESS-GO key is still not detected: X  Key Detected in Vehicle  Remove 'Start' Button and Insert Key  Close Doors to Lock Vehicle Operate the vehicle with the SmartKey in the ignition lock. The KEYLESS-GO key has been detected inside the vehicle during locking. X Remove the KEYLESS-GO key from the vehicle. KEYLESS-GO is temporarily malfunctioning or is defective. A warning tone also sounds. X Insert the SmartKey into the ignition lock and turn it to the desired position. X Visit a qualified specialist workshop. At least one door is open. A warning tone also sounds. X Close all doors and lock the vehicle again. Warning and indicator lamps in the instrument cluster Seat belt Problem Possible causes/consequences and M Solutions 7 The seat belt warning lamp reminds the driver and front passenger to fasten their seat belts. After starting the engine, the red seat X Fasten your seat belt (Y page 48). belt warning lamp lights up for six seconds. 7 G Risk of injury After starting the The driver's seat belt is not fastened. engine, the red seat belt warning lamp lights X Fasten your seat belt (Y page 48). The warning tone ceases. up. In addition, a warning tone sounds for up to six seconds. Z 239 On-board computer and displays Warning and indicator lamps in the instrument cluster 240 Warning and indicator lamps in the instrument cluster On-board computer and displays Problem Possible causes/consequences and M Solutions 7 G Risk of injury The red seat belt The driver or front passenger has not fastened their seat belt. warning lamp lights up after the engine starts, X Fasten your seat belt (Y page 48). The warning lamp goes out. as soon as the driver's or the front-passenger G Risk of injury door is closed. There are objects on the front-passenger seat. X Remove the objects from the front-passenger seat and stow them in a secure place. The warning lamp goes out. 7 The red seat belt warning lamp flashes and an intermittent audible warning sounds. G Risk of injury The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h). X Fasten your seat belt (Y page 48). The warning lamp goes out and the intermittent warning tone ceases. G Risk of injury There are objects on the front-passenger seat. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h). X Remove the objects from the front-passenger seat and stow them in a secure place. The warning lamp goes out and the intermittent warning tone ceases. Safety systems Problem Possible causes/consequences and M Solutions $ (USA only) G Risk of accident J (Canada only) There is not enough brake fluid in the brake fluid reservoir. The red brake system X Pull over and stop the vehicle safely as soon as possible, paying warning lamp comes on attention to road and traffic conditions. Do not continue driving while the engine is under any circumstances. running. A warning tone X Engage the parking brake. also sounds. X Consult a qualified specialist workshop immediately. X Observe the additional display messages in the multifunction display. Do not add brake fluid. This will not rectify the malfunction. G WARNING Driving with the brake warning lamp illuminated can result in an accident. Have your brake system checked immediately if the brake warning lamp stays on. Do not add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. You can be seriously burned. Z 241 On-board computer and displays Warning and indicator lamps in the instrument cluster 242 Warning and indicator lamps in the instrument cluster On-board computer and displays Problem Possible causes/consequences and M Solutions ! G Risk of accident The yellow ABS warning ABS (Anti-lock Brake System) is deactivated due to a malfunction. lamp is lit while the BAS (Brake Assist), BAS PLUS, ESP® (Electronic Stability engine is running. Program), PRE-SAFE® Brake, the HOLD function and hill start assist are therefore also deactivated, for example. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. ATTENTION ASSIST is deactivated. X Observe the additional display messages in the multifunction display. X Drive on carefully. X Visit a qualified specialist workshop. If the ABS control unit is faulty, there is also a possibility that other systems, such as the navigation system or the automatic transmission, will not be available. ! G Risk of accident The yellow ABS warning ABS is temporarily unavailable. BAS, BAS PLUS, ESP®, EBD lamp is lit while the (electronic brake force distribution), PRE-SAFE® Brake, the HOLD engine is running. function, hill start assist are therefore also deactivated, for example. Self diagnosis is not yet complete or the on-board voltage may be insufficient, for example. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. ATTENTION ASSIST is deactivated. X Carefully drive a suitable distance making slight steering movements at a speed above 12 mph (20 km/h). The functions mentioned above are available again when the warning lamp goes out. If the warning lamp is still on: X Observe the additional display messages in the multifunction display. X Drive on carefully. X Visit a qualified specialist workshop. Problem ! The yellow ABS warning lamp is lit while the engine is running. A warning tone also sounds. $ (USA only) J (Canada only) ÷å! The red brake warning lamp, the yellow ESP® and ESP® OFF warning lamps and the yellow ABS warning lamp are lit while the engine is running. ÷ The yellow ESP® warning lamp flashes while the vehicle is in motion. Possible causes/consequences and M Solutions G Risk of accident EBD is faulty. Therefore, ABS, BAS, BAS PLUS, ESP®, PRE-SAFE®, PRE-SAFE® Brake, the HOLD function and hill start assist are unavailable, for example. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. ATTENTION ASSIST is deactivated. X Observe the additional display messages in the multifunction display. X Drive on carefully. X Visit a qualified specialist workshop. G Risk of accident ABS and ESP® are faulty. Therefore, BAS, BAS PLUS, EBD, PRESAFE® Brake, the HOLD function and hill start assist, for example, are unavailable due to a malfunction. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. ATTENTION ASSIST is deactivated. X Observe the additional display messages in the multifunction display. X Drive on carefully. X Visit a qualified specialist workshop. G Risk of accident ESP® or traction control has intervened because there is a risk of skidding or at least one wheel has started to spin. Cruise control or DISTRONIC PLUS is deactivated. X Only depress the accelerator pedal as far as necessary when pulling away. X Ease off the accelerator pedal while the vehicle is in motion. X Adapt your driving style to suit the road and weather conditions. X Do not deactivate ESP®. Exceptions: (Y page 61). Z 243 On-board computer and displays Warning and indicator lamps in the instrument cluster 244 Warning and indicator lamps in the instrument cluster On-board computer and displays Problem å Possible causes/consequences and M Solutions G Risk of accident The yellow ESP® OFF ESP® is deactivated. ESP® will not stabilize the vehicle if it starts warning lamp is lit while to skid or if a wheel starts to spin. the engine is running. X Reactivate ESP®. Exceptions: (Y page 61). X Adapt your driving style to suit the road and weather conditions. If ESP® cannot be activated: X M AMG vehicles only: The yellow SPORT handling mode warning lamp is lit while the engine is running. Have ESP® checked at a qualified specialist workshop. G Risk of accident SPORT handling mode is activated. ESP® only stabilizes the vehicle in extreme situations. ESP® intervention may not be able to provide sufficient assistance in such situations and the vehicle may start to skid. X Reactivate ESP®. Exceptions: (Y page 61). If ESP® cannot be activated: X ÷å The yellow ESP® and ESP® OFF warning lamps are lit while the engine is running. Have ESP® checked at a qualified specialist workshop. G Risk of accident ESP®, BAS, BAS PLUS, PRE-SAFE® Brake, the HOLD function and hill start assist are not available due to a malfunction. ESP® will not stabilize the vehicle if it starts to skid or if a wheel starts to spin. The brake system continues to function normally, but without the functions listed above. ATTENTION ASSIST is deactivated. X Observe the additional display messages in the multifunction display. X Drive on carefully. X Visit a qualified specialist workshop. Problem ÷å The yellow ESP® and ESP® OFF warning lamps are lit while the engine is running. Possible causes/consequences and M Solutions G Risk of accident ESP®, BAS, the HOLD function and hill start assist are temporarily unavailable. BAS PLUS and PRE-SAFE® Brake may also have failed. ESP® will not stabilize the vehicle if it starts to skid or if a wheel starts to spin. Self diagnosis is not yet complete. The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock if you brake hard, for example. ATTENTION ASSIST is deactivated. X Carefully drive a suitable distance making slight steering movements at a speed above 12 mph (20 km/h). The functions mentioned above are available again when the warning lamp goes out. If the warning lamp is still on: X Observe the additional display messages in the multifunction display. X Drive on carefully. X Visit a qualified specialist workshop. $ (USA only) You are driving with the parking brake applied. X Release the parking brake J (Canada only) The warning lamp goes out and the warning tone ceases. The red brake system warning lamp comes on while the vehicle is moving. A warning tone also sounds. 6 The red SRS warning lamp is lit while the engine is running. G Risk of injury The restraint systems are malfunctioning. The air bags or ETDs may either be triggered unintentionally or, in the event of an accident, not be triggered at all. X Drive on carefully. X Visit a qualified specialist workshop immediately. G WARNING In the event a malfunction of the SRS is indicated as outlined above, the SRS may not be operational. Z 245 On-board computer and displays Warning and indicator lamps in the instrument cluster On-board computer and displays 246 Warning and indicator lamps in the instrument cluster For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked. Otherwise the SRS may not be activated when needed in an accident, which could result in serious or fatal injury, or it might deploy unexpectedly and unnecessarily which could also result in injury. Engine Problem Possible causes/consequences and M Solutions ; The yellow Check Engine warning lamp lights up while the engine is running. There may be a malfunction, for example: Rin the engine management the fuel injection system Rin the exhaust system Rin the ignition system Rin the fuel system The emission limit values may be exceeded and the engine may be running in emergency mode. X Have the vehicle checked as soon as possible at a qualified specialist workshop. Rin i In some states, you are required by law to immediately visit a qualified specialist workshop as soon as the yellow Check Engine warning lamp lights up. If in doubt, check whether such legal regulations apply in the state/province in which you are currently driving. 8 The fuel system pressure is too low. The fuel filler cap is not closed The yellow reserve fuel correctly or the fuel system is leaking. warning lamp flashes X Observe the additional display messages in the multifunction while the vehicle is in display. motion. In addition, the X Check that the fuel filler cap is correctly closed. yellow Check Engine X If the fuel filler cap is not correctly closed: close the fuel filler warning lamp ; cap. may light up. X If the fuel filler cap is closed: visit a qualified specialist workshop. 8 The fuel level has dropped into the reserve range. The yellow reserve fuel X Refuel at the nearest gas station. warning lamp lights up while the engine is running. Problem Possible causes/consequences and M Solutions ? The red coolant warning lamp lights up while the engine is running and the coolant temperature gauge is at the start of the scale. The temperature sensor for the coolant temperature gauge is defective. The coolant temperature is no longer being monitored. There is a risk of engine damage if the coolant temperature is too high. X Pull over and stop the vehicle safely and switch off the engine, paying attention to road and traffic conditions. Do not continue driving under any circumstances. X Apply the parking brake. X Consult a qualified specialist workshop. Z 247 On-board computer and displays Warning and indicator lamps in the instrument cluster 248 Warning and indicator lamps in the instrument cluster On-board computer and displays Problem Possible causes/consequences and M Solutions ? The red coolant warning lamp comes on while the engine is running. The coolant level is too low. If the coolant level is correct, the airflow to the engine radiator may be blocked or the electric engine radiator fan may be malfunctioning. The coolant is too hot and the engine is no longer being cooled sufficiently. X Observe the additional display messages in the multifunction display. X Pull over and stop the vehicle safely and switch off the engine, paying attention to road and traffic conditions. X Allow the engine and coolant to cool. X Check the coolant level and add coolant (Y page 280). Observe the warning notes. X If you need to add coolant more often than usual, have the engine coolant system checked. X Make sure that the air supply to the engine radiator is not blocked, e.g. by snow, slush or ice. X At coolant temperatures under 248 ‡ (120 † ), drive to the next qualified specialist workshop. X Avoid subjecting the engine to heavy loads, e.g. driving in mountainous terrain, and stop-and-go traffic. ? The red coolant warning lamp comes on while the engine is running. A warning tone also sounds. The coolant temperature has exceeded 248 ‡ (120 † ). The airflow to the engine radiator may be blocked or the coolant level may be too low. The engine is not being cooled sufficiently and may be damaged. X Observe the additional display messages in the multifunction display. X Pull over and stop the vehicle safely and switch off the engine, paying attention to road and traffic conditions. X Allow the engine and coolant to cool. X Check the coolant level and add coolant (Y page 280). Observe the warning notes. X If you need to add coolant more often than usual, have the engine coolant system checked. X Make sure that the air supply to the engine radiator is not blocked, e.g. by snow, slush or ice. X At coolant temperatures under 248 ‡ (120 † ), drive to the next qualified specialist workshop. X Avoid subjecting the engine to heavy loads, e.g. driving in mountainous terrain, and stop-and-go traffic. G WARNING Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an overheated engine can cause serious burns which can occur just by opening the engine hood. Stay away from the engine if you see or hear steam coming from it. Stop the vehicle in a safe location away from other traffic. Turn off the engine, get out of the vehicle and do not stand near the vehicle until the engine has cooled down. ! If the coolant temperature exceeds 248 ‡(120 †) do not continue driving. The engine will otherwise be damaged. Driving systems Problem Possible causes/consequences and M Solutions · G Risk of accident The red distance The warning is issued if you approach a stationary vehicle or a warning lamp lights up vehicle driving ahead of you at too high a speed. while the vehicle is in motion. A warning tone X Be prepared to brake immediately. X Pay careful attention to the traffic situation. You may have to also sounds. brake or take evasive action. More information about DISTRONIC PLUS (Y page 161) and PRE-SAFE® Brake (Y page 65). Z 249 On-board computer and displays Warning and indicator lamps in the instrument cluster On-board computer and displays 250 Warning and indicator lamps in the instrument cluster Tires Problem Possible causes/consequences and M Solutions h G Risk of accident USA only: The tire pressure monitor has detected a loss of pressure in at The yellow tire pressure least one of the tires. monitor warning lamp X Stop the vehicle without making any sudden steering or braking (pressure loss/ maneuvers. Pay attention to the traffic conditions as you do so. malfunction) is lit. X Observe the additional display messages in the multifunction Canada only: display. The yellow tire pressure X Check the tire pressure. If necessary, correct the tire pressure monitor warning lamp (Y page 319). (pressure loss) is lit. X If necessary, change a wheel (Y page 334). h The tire pressure monitor is faulty. USA only: X Observe the additional display messages in the multifunction display. The yellow tire pressure monitor warning lamp X Visit a qualified specialist workshop. (pressure loss/ malfunction) flashes for 60 seconds and then remains lit. G WARNING Each tire, including the spare (if provided), should be checked at least every two weeks when cold and inflated to the pressure recommended by the vehicle manufacturer on the Tire and Loading Information placard on the driver's door B-pillar or, if available, the tire pressure label on the inside of the fuel filler flap. If your vehicle has tires of a different size than the size indicated on the Tire and Loading Information placard or the tire pressure label, you should determine the proper tire pressure for those tires. As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires are significantly underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. USA only: Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately 1 minute and then remain continuously illuminated. This sequence will be repeated every time the vehicle is started as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of incompatible replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. Z 251 On-board computer and displays Warning and indicator lamps in the instrument cluster 252 253 254 254 254 259 Stowing and features Useful information ............................ Loading guidelines ............................ Stowage areas .................................. Features ............................................. 254 Stowage areas Useful information Stowing and features i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). Loading guidelines G WARNING Always fasten items being carried as securely as possible using fastening materials appropriate for the weight and size of the load. In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle. To help avoid personal injury during a collision or sudden maneuver, exercise care when transporting cargo. Do not pile luggage or cargo higher than the seat backrests. The trunk is the preferred place to carry objects. Do not place anything on the rearwindow shelf. Never drive a vehicle with the trunk open. Deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death. The handling characteristics of a laden vehicle are dependent on the distribution of the load within the vehicle. For this reason, you should observe the following notes when transporting a load: Rwhen transporting a load, never exceed the maximum permissible gross vehicle weight or the gross axle weight rating of the vehicle (including occupants). The values are specified on the vehicle identification plate on the B-pillar of the driver's door. Rposition heavy loads as far forwards as possible and as low down in the trunk as possible. Rthe load must not protrude above the upper edge of the seat backrests. Ralways place the load against the rear or front seat backrests. Make sure that the seat backrests are securely locked into place. Ralways place the load behind unoccupied seats if possible. Rsecure the load with sufficiently strong and wear-resistant tie down. pad sharp edges for protection. Stowage areas Stowage compartments Important safety notes G WARNING To help avoid personal injury during a collision or sudden maneuver, exercise care when storing objects in the vehicle. Put luggage or cargo in the trunk if possible. Do not pile luggage or cargo higher than the seat backrests. Keep compartment lids closed. This will help to prevent stored objects from being thrown about and injuring vehicle occupants during Rbraking Rvehicle Ran maneuvers accident Stowage compartments in the front Glove box i The glove box can be cooled (Y page 132). X To open: pull handle : and open glove box flap ;. X To close: fold glove box flap ; upwards until it engages. The glove box can only be locked and unlocked using the mechanical key. X To open: pull down eyeglasses compartment : by the handle. Stowage compartment under the armrest i Depending on the vehicle's equipment, a USB connection and an AUX IN connection or a Media Interface are installed in the stowage compartment. A Media Interface is a universal interface for mobile audio equipment, e.g. for an iPod® or MP3 player (see the separate COMAND operating instructions). X To lock: insert the mechanical key into the lock and turn it 90° clockwise to position 2. X To unlock: insert the mechanical key into the lock and turn it 90° counter-clockwise to position 1. Eyeglasses compartment There is a compartment to stow eyeglasses in the headliner on the driver's side. X To open: press left-hand button ; or righthand button :. The stowage compartment opens. Z 255 Stowing and features Stowage areas Stowage areas 256 Stowing and features Stowage compartment under the front seats storage bag. In an accident, during hard braking, or sudden maneuvers, they could be thrown around inside the vehicle and cause injury to vehicle occupants. Storage bags cannot protect transported goods in the event of an accident. Storage bags are located in the rear compartment on the driver's and frontpassenger seat backrests. Parcel nets X To open: pull handle : up and fold cover ; forwards. Stowage compartments in the rear Stowage compartment in the rear ! Do not sit or lean your bodyweight on the armrests when they are folded out as you could damage them. ! Close the cover of the stowage compartment before folding the rear seat armrest back into the seat backrest. G WARNING Parcel nets are intended for storing lightweight items only, such as road maps, mail, etc. Heavy objects, objects with sharp edges, or fragile objects may not be transported in the parcel nets. In an accident, during hard braking, or sudden maneuvers, they could be thrown around inside the vehicle and cause injury to vehicle occupants. Parcel nets cannot protect transported goods in the event of an accident. Parcel nets are located in the front-passenger footwell and on the left-hand side of the trunk. Rear bench seat through-loading feature Important safety notes G WARNING X To open: fold down seat armrest ;. X Fold cover : of the armrest upwards. Stowage pockets G WARNING Storage bags are intended for storing lightweight items only. Heavy objects, objects with sharp edges or fragile objects may not be transported in the When expanding the cargo volume, always fold the seat backrests fully forward. Unless you are transporting cargo, the seat backrests must remain properly locked in the upright position. In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle. Stowage areas Always use the cargo tie-down rings. 257 Folding the seat backrest back The left-hand and right-hand rear seat backrests can be folded down separately to increase the trunk capacity. X Move the driver's or front-passenger seat forward if necessary. ! Make sure that the seat belt does not X Move the driver's or front-passenger seat forward if necessary. X Open the trunk. X Pull right-hand or left-hand rear seat backrest release handle :. The corresponding rear seat backrest is released. X Fully insert the rear seat backrest head restraints. X Fold rear seat backrest ; forwards. X Move the driver's or front-passenger seat back if necessary. become trapped when folding the rear seat backrest back. Otherwise, it could be damaged. X Fold rear seat backrest : back until it engages. G WARNING Always lock the seat backrest in its upright position when the rear seat bench is occupied, or the extended cargo volume is not in use. Check for secure locking by pushing and pulling on the seat backrest. In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle. To help avoid personal injury during a collision or sudden maneuver, exercise care when transporting cargo. i You should always engage the rear seat backrests if you do not need the throughloading feature. This will prevent unauthorized access to the trunk from the vehicle interior. Z Stowing and features Folding the seat backrest forward Stowage areas 258 X Adjust the head restraints if necessary (Y page 96). X Move the driver's or front-passenger seat back if necessary. Securing cargo Stowing and features Cargo tie-down rings Observe the following notes on securing loads: Rsecure : Bag hook the load using the cargo tie down rings. not use elastic straps or nets to secure a load, as these are only intended as an anti-slip protection for light loads. Rdo not route tie downs across sharp edges or corners. Rpad sharp edges for protection. There are four cargo tie down rings in the trunk. Rdo Stowage well under the trunk floor The TIREFIT kit, the vehicle tool kit, etc. are located in the stowage compartment. X To open: pull handle : upwards. X Hook handle : into rain trough ;. Vehicle with through-loading feature in the rear bench seat : Cargo tie down rings Bag hooks ! The bag hook can bear a maximum load of 11 lbs (5 kg). Do not use it to secure a load. ! Unhook the handle before again before closing the trunk lid and clip it in securely to prevent the handle flap from protruding. Otherwise, you could damage the handle. Features Roof carrier 259 Attaching the roof carrier Important safety notes Only use roof racks approved by MercedesBenz for your vehicle model to avoid damage to the vehicle. Follow the manufacturer's installation instructions. Otherwise, an improperly attached roof rack system or its load could become detached from the vehicle. Do not exceed the maximum roof load of 220 lb (100 kg). Take into consideration that when the roof rack is loaded, the handling characteristics are different from those when operating the vehicle without the roof rack loaded. ! Mercedes-Benz recommends that you only use roof carriers that have been tested and approved for Mercedes-Benz vehicles. This helps to prevent damage to the vehicle. Position the load on the roof carrier in such a way that the vehicle will not sustain damage even when it is in motion. Depending on the vehicle equipment, ensure that when the roof carrier is installed you can: Rraise the sliding sunroof fully the panorama roof with power tilt/ sliding panel fully Ropen the trunk lid fully Ropen ! To avoid damaging or scratching the covers, do not use metallic or hard objects to open them. X Open covers : carefully in the direction of the arrow. X Fold covers : upwards. X Only secure the roof carrier to the anchorage points under covers :. X Observe the manufacturer's installation instructions. Features Cup holders Important safety notes G WARNING In order to help prevent spilling liquids on vehicle occupants and/or vehicle equipment, only use containers that fit into the cup holder. Use lids on open containers and do not fill containers to a height where the contents, especially hot liquids, could spill during braking, vehicle maneuvers, or in an accident. Liquids spilled on vehicle occupants may cause serious personal injury. Liquids spilled on vehicle equipment may cause damage not covered by the Mercedes-Benz Limited Warranty. When not in use, keep the cup holder closed. An open cup holder may cause injury to you or others when contacted during braking, vehicle maneuvers, or in an accident. Keep in mind that objects placed in the cup holder may come loose during braking, vehicle maneuvers, or in an accident and be Z Stowing and features G WARNING Features 260 thrown around in the vehicle interior. Objects thrown around in the vehicle interior may cause an accident and/or serious personal injury. Stowing and features Cup holder in the front-compartment center console X Swing the rear seat armrest cover back down, if necessary. X To close: raise the rear seat armrest cover. Swing cup holder ; back until it engages. Sun visors Overview of sun visors G WARNING Do not use the vanity mirror while driving. Keep the vanity mirrors in the sun visors closed while the vehicle is in motion. Reflected glare can endanger you and others. : Cup holders Cup holder in the rear seat armrest ! Do not sit on or support your body weight on the rear seat armrest when it is folded down, as you could otherwise damage it. ! Close the cup holder before folding the rear seat armrest up. Otherwise, the cup holder could be damaged. : Mirror light ; Bracket = Retaining clip, e.g. for a car park ticket ? Vanity mirror A Mirror cover Vanity mirror in the sun visor Mirror light : only functions if the sun visor is clipped into retainer ; and mirror cover A has been folded up. X Fold down the rear seat armrest. X To open: raise the rear seat armrest cover. X Press release catch :. Cup holder ; folds out forwards. Glare from the side X Fold down the sun visor. Pull the sun visor out of retainer ;. X Swing the sun visor to the side. X Features 261 Rear window roller sunblind (Sedan) Important safety notes X Pull or push the sun visor in the direction of the arrow. Sunblinds on the rear side windows When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. The children could: Rinjure themselves on parts of the vehicle seriously or fatally injured through excessive exposure to extreme heat or cold Rinjure themselves or cause an accident with vehicle equipment that can be operated even if the SmartKey is removed from the ignition lock or removed from the vehicle, such as seat adjustment, steering wheel adjustment, or the memory function If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and the child could be burned on these parts. Rbe X To extend: pull the roller sunblind out by tab : and hook it onto retainers ; at the top of the window. ! Always guide the roller sunblind by hand. Do not let it snap back suddenly as this would damage the automatic roller mechanism. ! Do not drive the vehicle with the roller sunblind hooked in and the side windows opened simultaneously. The roller sunblind can jump out of the retainers and spring back suddenly when driving at high speeds, e.g. when driving on the freeway. This could damage the inertia reel. Therefore, either close the side window or retract the roller sunblind before driving at high speeds. G WARNING When adjusting a roller sunblind, the roller blind moves up or down. You might become trapped in the process. In the event of danger, briefly press the button for the roller sunblind to change the roller blind's direction of movement. Extending/retracting the roller sunblind ! Make sure that the roller sunblind can move freely. Otherwise, the roller sunblind or other objects could be damaged. Z Stowing and features G WARNING Features 262 X To re-install the insert: press insert = into the holder until it engages. X To close: press cover : briefly at the front. The cover moves back. Stowing and features Ashtray in the rear-compartment center console X Turn the SmartKey to position 2 in the ignition lock. X To extend or retract: briefly press button :. The roller sunblind fully extends or fully retracts. Ashtray Ashtray in the front-compartment center console i You can remove the ashtray insert and use the resulting compartment for stowage. X To open: pull cover ; out by its top edge. To remove the insert: press release button = and lift the insert up and out. X To install the insert: put insert : from above into the holder and press down into the holder until it engages. X ! The stowage space under the ashtray is not heat resistant. Before placing lit cigarettes in the ashtray, make sure that the ashtray is properly engaged. Otherwise, the stowage space could be damaged. Cigarette lighter G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. The children could: Rinjure X To open: slide cover : forwards until it engages. X To remove insert: hold insert = by the ribbing at the sides and lift it up ; and out. themselves on parts of the vehicle seriously or fatally injured through excessive exposure to extreme heat or cold Rinjure themselves or cause an accident with vehicle equipment that can be operated Rbe Features G WARNING Never touch the heating element or sides of the lighter; they are extremely hot. Hold the knob only. Make sure any children traveling with you do not injure themselves or start a fire with the hot cigarette lighter. X Turn the SmartKey to position 2 in the ignition lock. X To open: slide cover : forwards until it engages. X Press in cigarette lighter ;. Cigarette lighter ; will pop out automatically when the heating element is red-hot. X To close: press cover : briefly at the front. The cover moves back. 12 V sockets Points to observe before use The sockets can be used for accessories, e.g. lamps or mobile phone chargers with a maximum current draw of 180 W (15 A). If you use the sockets for long periods when the engine is switched off, the battery may discharge. X Turn the SmartKey to position 1 in the ignition lock. i An emergency cut-out ensures that the on-board voltage does not drop too low. If the on-board voltage is too low, the power to the sockets is automatically cut. This ensures that there is sufficient power to start the engine. Socket in the rear-compartment center console X Pull cover ; out by its top edge. X Lift up the cover of socket :. 115 V power socket G WARNING The 115V AC socket operates at high voltage. Use the 115V AC socket in the vehicle with the same caution and prudence that you exercise when using power outlets at home. Keep any fluids away from the 115V AC socket. Do not clean the socket with fluids or tapered objects. Keep the 115V AC socket Z Stowing and features even if the SmartKey is removed from the ignition lock or removed from the vehicle, such as seat adjustment, steering wheel adjustment, or the memory function If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and the child could be burned on these parts. 263 264 Features cover in the closed position, when not in use. Otherwise, you could suffer an electric shock and be seriously or even fatally injured. Stowing and features G WARNING Any device that you connect must have a suitable plug and meet U.S. standards. Never pull at a cable to disconnect a plug from a 115 V AC power socket. Never use a damaged connection cable. The 115 V AC power socket must never be connected to another 115 V AC power source. Do not use a converter with an earthed plug for the 115 V AC power socket. This could cause serious injury to you and/or other people. G WARNING If the 115V AC socket is damaged or torn out of the trim, do not use or touch the 115V AC socket. Using a 115V AC socket that is damaged or torn out of the trim could cause serious personal injury to you and/or others. 115 V socket : provides an alternating voltage of 115 V, so that small electronic devices can be connected. These devices, such as games consoles, chargers and laptops, together should not consume more than a maximum of 150 W. Requirements for operation of these devices: Rthe plug of the electronic device must be inserted fully into 115 V power socket :. Rthe maximum wattage of the device to be connected must not exceed 150 W. Rthe on-board power supply is within a permissible volt range. Rthe 12 V socket in the rear is operational (Y page 263). X Open flap =. X Insert the plug of the electronic device into 115 V power socket :. Indicator lamp ; lights up. If indicator lamp ; does not light up, consult the section on malfunctions. X To turn off: disconnect the plug from 115 V power socket :. Ensure that you do not pull on the cord. X Close flap =. Possible causes of malfunction: Rthe on-board power supply is not within a permissible volt range. Rthe temperature of the DC/AC converter is temporarily too high. Rsome small electronic devices have a constant nominal power of less than 150 W, but a very high inrush current. These devices will not work. If you connect such a device, 115 V power socket : will not supply it with power. If indicator lamp ; still does not light up, contact a specialist workshop, e.g. an authorized Mercedes-Benz Center. mbrace Important safety notes ! A license agreement must exist in order to activate the mbrace service. Ensure that your system is activated and ready for use, and press the ï MB Info call button to register. If any of the steps mentioned is not carried out, the system may not be activated. Features RUSA: Mercedes-Benz Customer Assistance Center under 1-800-FOR-MERCedes (1-800-367-6372) or 1-888-990-9007 RCanada: Customer Service at 1-888-923-8367 Shortly after successfully registering with the mbrace service, a user ID and password will be sent to you by post. You can use this password to log in to the mbrace section under "Owners Online" at http:// www.mbusa.com19. The mbrace system is available if: You can find further information and a description of all available features under "Owners Online" at http:// www.mbusa.com20. System self-test After you have switched on the ignition, the system carries out a self-diagnosis. G WARNING A malfunction in the system has been detected if one of the following conditions occurs: and manual emergency call Assistance call RMB Info call To adjust the volume during an mbrace call, proceed as follows: indicator lamp in the SOS button does not light up during the system selfdiagnosis. Rthe indicator lamp in the F Roadside Assistance button does not light up during the system self-diagnosis. RThe indicator lamp in the ï information button does not light up during selfdiagnosis of the system. Rthe indicator lamp in the SOS button, F Roadside Assistance button or ï information button continues to be lit red after the system self-diagnosis. RThe Tele Aid Inoperative or Tele Aid Not Activated message appears in the multifunction display after the system selftest. If a malfunction is indicated as outlined above, the system may not operate as expected. In the event of an emergency, assistance must be summoned by other means. Have the system checked at the nearest authorized Mercedes-Benz Center or contact the following service hotlines: X RUSA: Mercedes-Benz Customer Assistance Rit has been activated and is operational. corresponding mobile phone network is available for transmitting data to the Customer Center. Ra service subscription is available. Rthe starter battery is sufficiently charged. Rthe i Determining the location of the vehicle on a map is only possible if there is sufficient GPS reception and the vehicle position can be forwarded to the Customer Center. The mbrace system The mbrace system provides different services, e.g.: Rautomatic RRoadside Press the W or X button on the multifunction steering wheel. or X Use the volume controller of the audio system. 19 USA 20 USA Rthe Center under 1-800-FOR-MERCedes(1-800-367-6372) or 1-888-990-9007 RCanada: Customer Service at 1-888-923-8367 only. only. Z Stowing and features If you have questions about the activation, contact one of the following telephone assistance services: 265 266 Features Stowing and features Emergency call Important safety notes ! A license agreement must exist in order to activate the mbrace service. Ensure that your system is activated and ready for use, and press the ï MB Info call button to register. If any of the steps mentioned is not carried out, the system may not be activated. If you have questions about the activation, contact one of the following telephone assistance services: RUSA: Mercedes-Benz Customer Assistance Center under 1-800-FOR-MERCedes (1-800-367-6372) or 1-888-990-9007 RCanada: Customer Service at 1-888-923-8367 An emergency call is dialed automatically if an air bag or Emergency Tensioning Device is triggered. i An mbrace emergency call that has been Customer Assistance Center and the vehicle occupants. If the vehicle occupants respond, the Mercedes-Benz Customer Assistance Center attempts to get more information on the emergency. i If no vehicle occupant answers, an ambulance is immediately sent to the vehicle. G WARNING If the indicator lamp in the SOS button is flashing continuously and no voice connection to the Mercedes-Benz Customer Assistance Center was established, then the mbrace system could not initiate an emergency call (e.g. the relevant cellular phone network is not available). The message Call Failed appears in the multifunction display for approximately 10 seconds. Should this occur, assistance must be summoned by other means. Making an emergency call initiated automatically cannot be terminated by the customer. An emergency call can also be initiated manually. As soon as the emergency call has been initiated, the indicator lamp in the SOS button flashes. The Connecting Call message appears on the multifunction display. The audio output is muted. Once a connection has been established, the Call Connected message appears in the multifunction display. All important information on the emergency is transmitted, for example: Rcurrent location of the vehicle (as determined by the GPS system) Rvehicle identification number Rinformation on the type of emergency Shortly after the emergency call has been initiated, a voice connection is automatically established between the Mercedes-Benz X To initiate an emergency call manually: press cover : briefly to open it. X Press SOS button ; briefly. The indicator lamp in SOS button ; flashes until the emergency call is concluded. Features Wait for a voice connection to the Mercedes-Benz Customer Assistance Center. X After the emergency call is ended, close cover :. G WARNING If you feel in any way in jeopardy when in the vehicle (e.g. smoke or fire in the vehicle, vehicle in a dangerous road location), please do not wait for voice contact after you have pressed the SOS button. Carefully leave the vehicle and move to a safe location. The Mercedes-Benz Customer Assistance Center will automatically contact local emergency officials with the vehicle's approximate location if they receive an automatic SOS signal and cannot make voice contact with the vehicle occupants. Roadside Assistance button If a cellular phone network is available and there is sufficient GPS reception, the mbrace system transmits data to the Mercedes-Benz Customer Assistance Center, for example: Rcurrent Rvehicle location of the vehicle identification number i The display of the audio system or COMAND shows that an mbrace call is active. During the call, you can change to the navigation menu by pressing the NAVI button on COMAND, for example. Voice output is not available. A voice connection is established between the Mercedes-Benz Customer Assistance Center and the vehicle occupants. X Describe the type of assistance needed. The Mercedes-Benz Customer Assistance Center either sends a qualified MercedesBenz technician or organizes for your vehicle to be transported to the nearest authorized Mercedes-Benz Center. You may be charged for services such as repair work and/or towing. Further details are available in your mbrace manual. i The mbrace system failed to initiate a Roadside Assistance call if: Rthe X Press and hold Roadside Assistance button : for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in Roadside Assistance button : flashes while the call is active. The Connecting Call message appears in the multifunction display. The audio output is muted. If a connection can be established, the Call Connected message appears in the multifunction display. indicator lamp in Roadside Assistance button : is flashing continuously. Rno voice connection to the MercedesBenz Customer Assistance Center was established. This may be because the corresponding mobile phone network is not available. The Call Failed message appears in the multifunction display. X To end a call: press the ~ button on the multifunction steering wheel. or X Press the corresponding button for ending a phone call on the audio system or on COMAND. Z Stowing and features X 267 Features 268 MB Info call button and on further products and services offered by Mercedes-Benz USA. Further details on the mbrace system can be found under http://www.mbusa.com21. Log in under "Owners Online". i The mbrace system failed to initiate an Stowing and features MB Info call if: Rthe X Press and hold MB Info call button : for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in MB Info call button : flashes while the connection is being established. The Connecting Call message appears in the multifunction display. The audio output is muted. If a connection can be established, the Call Connected message appears in the multifunction display. If a cellular phone network is available and there is sufficient GPS reception, the mbrace system transmits data to the Mercedes-Benz Customer Assistance Center, for example: Rcurrent Rvehicle location of the vehicle identification number i The display of the audio system or COMAND shows that an mbrace call is active. During the call, you can change to the navigation menu by pressing the NAVI button on COMAND, for example. Voice output is not available. A voice connection is established between the Mercedes-Benz Customer Assistance Center and the vehicle occupants. You can obtain information on how to operate your vehicle's systems, on the location of the nearest authorized Mercedes-Benz Center, 21 USA only. indicator lamp in MB Info call button : is flashing continuously. Rno voice connection to the MercedesBenz Customer Assistance Center was established. This may be because the corresponding mobile phone network is not available. The Call Failed message appears in the multifunction display. X To end a call: press the ~ button on the multifunction steering wheel. or X Press the corresponding button for ending a phone call on the audio system or on COMAND. Call priority When service calls are active, e.g. Roadside Assistance or MB Info calls, an emergency call can still be initiated. In this case, an emergency call will take priority and override all other active calls. The indicator lamp of the respective button flashes until the call is ended. An emergency call can only be terminated by the MercedesBenz Customer Assistance Center. All other calls can be ended by pressing the ~ button on the multifunction steering wheel or the corresponding button for ending a telephone call on the audio system or on COMAND. i If an mbrace call is initiated, audio output is muted. The mobile phone is no longer connected to COMAND. However, if you want to use your mobile phone, we Features Downloading destinations in COMAND i Information on the components and operating principles of COMAND can be found in the separate COMAND operating instructions. i You can only use the Destination Download function if the vehicle is equipped with a navigation system. Destination Download gives you access to a database with over 15 million points of interest (POIs)/important destinations that can be downloaded onto the navigation system of your vehicle. If you know the destination, you can download the address or obtain the location of points of interest (POIs)/important destinations in the surrounding area. You are prompted to confirm route guidance to the address entered. The system calculates the route and subsequently starts the route guidance with the address entered. i If you select No, the address can be stored in the address book. i The Destination Download function is available if the corresponding mobile phone network is available and data transfer is possible. Route Assistance This service is part of the mbrace PLUS Package and cannot be purchased separately. i You can also use the Route Assistance function if your vehicle is not equipped with a navigation system. Within the framework of this service, you receive a professional and reliable form of navigation support without having to leave your vehicle. 22 USA The customer service representative determines a suitable driving route based on your current vehicle position and the desired destination and guides you live through the current sections of the route. Search & Send "Search & Send" is a destination entry service. You can find further information on "Search & Send" in the separate COMAND operating instructions. Remote vehicle unlocking If you have unintentionally locked your vehicle (e.g. the SmartKey is still in the vehicle) and a replacement SmartKey is not available, the vehicle can be opened by a Mercedes-Benz Customer Assistance Center. The vehicle can be opened remotely up to four days after the ignition was last switched off. X Contact the following service hotlines: RUSA: Mercedes-Benz Customer Assistance Center under 1-800-FORMERCedes(1-800-367-6372) or 1-888-990-9007 RCanada: Customer Service at 1-888-923-8367 You will be asked for your password. X Return to your vehicle at the time agreed upon with the Mercedes-Benz Customer Assistance Center. X Pull the trunk lid handle for at least 20 seconds until the indicator lamp in the SOS button (Y page 266) flashes. The Connecting Call message appears on the multifunction display. Alternatively, the vehicle can also be opened via the Internet or an iPhone in the "Owners Online" section using your ID number and password22. i Vehicle remote unlocking is only possible if the corresponding mobile phone network is accessible. only. Z Stowing and features recommend that you do this only when the vehicle is stationary and in a safe location. 269 Stowing and features 270 Features The SOS button flashes and the Connecting Call message appears in the multifunction display to confirm that the command for vehicle remote unlocking has been received. If you pull the trunk handle for more than 20 seconds before receiving authorization for remote unlocking, you must wait 15 minutes before you can pull the trunk lid handle again. Remote vehicle locking If you forget to lock your vehicle but are no longer in the vicinity of the vehicle, it can be locked for you by the Mercedes-Benz Customer Assistance Center. The vehicle can be locked remotely up to four days after the ignition was last switched off. X Contact the following service hotlines: RUSA: Mercedes-Benz Customer Assistance Center under 1-800-FORMERCedes(1-800-367-6372) or 1-888-990-9007 RCanada: Customer Service at 1-888-923-8367 You will be asked for your PIN. The next time you are in your vehicle and switch on the ignition, the Tele Aid Doors locked by remote control message appears in the multifunction display. Alternatively, the vehicle can also be locked via the Internet or an iPhone in the "Owners Online" section using your ID number and password. i The vehicle valet locking feature is available when the relevant mobile phone network is available and data connection is possible. Service for recovering a stolen vehicle If your vehicle has been stolen: X Notify the police. The police will issue a numbered incident report. X This number will be forwarded to the Mercedes-Benz Customer Assistance Center together with your PIN. The Mercedes-Benz Customer Assistance Center then attempts to locate the mbrace system. The Mercedes-Benz Customer Assistance Center contacts you and the local law enforcement agency if the vehicle is located. However, only the law enforcement agency is informed of the location of the vehicle. i If the anti-theft alarm system is active for longer than 30 seconds, mbrace automatically informs the Mercedes-Benz Customer Assistance Center. Garage door opener Important safety notes The HomeLink® garage door opener integrated in the rear-view mirror allows you to operate up to three different door and gate systems. i Certain garage door drives are incompatible with the integrated garage door opener. If you have difficulty programming the integrated garage door opener, contact an authorized MercedesBenz Center or call one of the following telephone hotlines: RUSA: Mercedes-Benz Customer Assistance Center at 1-800-FOR-MERCedes RCanada: Customer Service at 1-800-387-0100 G WARNING Before programming the integrated remote control to a garage door opener or gate Features 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Any unauthorized modification to this device could void the user's authority to operate the equipment. IC: 279B-HMIHL4 Programming the integrated garage door opener on the rear-view mirror Programming G WARNING Only press the transmitter button on the integrated garage door opener if there are no persons or objects present within the sweep of the garage door. People could otherwise be injured by the movement of the door. i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. FCC ID: CB2HMIHL4 i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and Integrated garage door opener on the rear-view mirror Garage door remote control A is not part of this integrated garage door opener. i To achieve the best result, insert new batteries in garage door remote control A before programming. X Before programming for the first time, clear the memory of the integrated garage door opener (Y page 274). X Turn the SmartKey to position 2 in the ignition lock. Z Stowing and features operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. When programming a garage door opener, the door moves up or down. When programming a gate operator, the gate opens or closes. Do not use the integrated remote control with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object - signaling the door to stop and reverse - does not meet current U.S. federal safety standards. When programming a garage door opener, park vehicle outside the garage. Do not run the engine while programming the integrated remote control. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. 271 Features 272 Stowing and features X Press and hold one of transmitter buttons ; to ? on the integrated garage door opener. Indicator lamp : starts to flash yellow after a short period. i Indicator lamp : flashes yellow immediately after the transmitter button has been stored for the first time. If the transmitter button has already been programmed, indicator lamp : does not flash yellow until 10 seconds have elapsed. X Release the transmitter button. Point transmitter button B of garage door remote control A towards the transmitter buttons on the rear-view mirror at a distance of 2 to 8 inches (5 to 20 cm). i The distance required between garage door remote control A and the integrated garage door opener depends on the system of the garage door drive. You might require several attempts. You should test every position for at least 25 seconds before trying another position. X X Press and hold transmitter button B on garage door remote control A until indicator lamp : lights up green. Programming is complete if indicator lamp : lights up or flashes green. X Release transmitter button ;, = or ? on the integrated garage door opener and the transmitter button on garage door remote control B. If indicator lamp : lights up red: X Repeat the programming procedure for the transmitter button. When doing so, vary the distance between the garage door remote control and the rear-view mirror. i If the indicator lamp flashes green after successful programming, the garage door system is operating on a rolling code. After programming, you must synchronize the garage door opener integrated in the rear- view mirror with the receiver of the garage door system. Synchronizing the rolling code Your vehicle must be within range of the garage or gate opener drive. Make sure that neither your vehicle nor any persons/objects are present within the sweep of the door or gate. Observe the safety notes when performing the rolling code synchronization. X Turn the SmartKey to position 2 in the ignition lock. X Press the programming button of the door or gate drive (see the door or gate drive operating instructions, e.g. under "Programming of additional remote controls"). i You now normally have 30 seconds to initiate the next step. X Press the previously programmed transmitter button of the HomeLink® integrated garage door opener repeatedly in succession until the door opens. The rolling code synchronization is then complete. Notes on programming the remote control Canadian radio frequency laws require a "break" (or interruption) of the transmission signals after broadcasting for a few seconds. These signals may not therefore last long enough for the integrated garage door opener to recognize the signal during programming. Comparable with Canadian law, some U.S. garage door openers also have a built-in "interruption". If you live in Canada or have difficulties programming the garage door opener (regardless of where you live) when using the programming steps (see above), proceed as follows: Features Press and hold one of transmitter buttons ; to ? of the integrated garage door opener. Indicator lamp : starts to flash yellow after a short period. X Release the transmitter button. X Press transmitter button B of the garage door remote control and hold for two seconds, then release for two seconds, then press again and hold for two seconds. X Repeat this sequence on transmitter button B of the garage door remote control until indicator lamp : is green. Repeat the process if indicator lamp : turns red. X Continue with the other programming steps (see above). Problems when programming If you are experiencing problems programming the integrated garage door opener on the rear-view mirror, take note of the following instructions: Rcheck the transmission frequency of garage door remote control A (usually found on the reverse side of the remote control). The integrated garage door opener is compatible with devices that can be operated with units in a frequency range of 280 to 390 MHz. Rchange the batteries in garage door remote control A. This increases the probability that garage door remote control A will send a strong and precise signal to the integrated garage door opener on the rearview mirror. Rwhen programming, hold garage door remote control A at different distances and angles from the transmitter button that you are programming. Try different angles at a distance between 2 and 12 inches (5 to 30 cm) or the same angle at varying distances. Rif another remote control for the same garage door drive is available, repeat the same programming steps with this remote control. Before you perform the steps of the operation, make sure that there are new batteries in the garage door remote control. Rnote that some remote controls only transmit for a limited amount of time (the indicator lamp on the remote control goes out). Press the remote control button again before it stops transmitting. Ralign the antenna cable of the garage door opener unit. This can improve signal reception/transmission. Opening/closing the garage door Once programmed, the integrated garage door opener will assume the function of the garage door system's remote control. Please also read the operating instructions for the garage door system. X Turn the SmartKey to position 2 in the ignition lock. X Press transmitter button ;, = or ? in the overhead control panel that you have programmed to operate the garage door. Garage door system with a fixed code: indicator lamp : lights up green. Garage door system with a rolling code: indicator lamp : flashes green. i The transmitter will transmit a signal for as long as the transmitter button is being pressed. After a maximum of ten seconds, transmission is terminated and indicator lamp : flashes yellow. Press the transmitter button again, if necessary. Z Stowing and features X 273 Features 274 Clearing the memory of the integrated garage door opener on the rear-view mirror Stowing and features X Turn the SmartKey to position 2 in the ignition lock. X Press transmitter buttons ; and ?. The indicator lamp lights up yellow. X Press and hold transmitter buttons ; and ? until the indicator lamp turns green. i Make sure that you clear the memory of the integrated garage door opener before selling the vehicle. Features 275 Frequencies for the garage door opener The radio type approval number and the frequency range for the garage door opener can be found on the Internet at: http://www.mercedes-benz.de/betriebsanleitung. Compass Calling up the compass Stowing and features The compass shows which direction the vehicle is currently traveling in: N, NE, E, SE, S, SW, W or NW. South America zone map To obtain a correct display in rear-view mirror :, the compass must be calibrated and the magnetic field zone must be set. Setting the compass X Determine your position using the following zone maps. X Press a round pin into opening =(Y page 275) for approximately three seconds. The currently selected zone appears in compass display ;(Y page 275). X To select the zone: press a round pin into opening =(Y page 275) repeatedly until the desired zone is selected. The zone has been selected when compass display ;(Y page 275) shows the heading. This takes a few seconds. North America zone map Z Features 276 Calibrating the compass X Make sure that there is sufficient space for you to drive in a circle without impeding the remaining traffic. In order to calibrate the compass correctly, observe the following points: Stowing and features Rcalibrate the compass in the open and not in the vicinity of steel constructions or highvoltage transmission lines. Rswitch off electrical consumers, for example, the climate control, windshield wipers or rear window defroster. Rclose all doors and the trunk lid. X Switch the ignition on. X Press a round pin into opening = (Y page 275) for approximately six seconds until the C symbol appears in compass display ; (Y page 275). X Drive a full circle at approximately 3 mph (5 km/h) to 6 mph (10 km/h). Once the calibration has been successfully completed, the current direction appears in compass display ; (Y page 275). Floormat on the driver's side G WARNING Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened. The floormat should always be securely fastened using the fastening equipment. Before driving off, check that the floormat is securely in place and adjust it if necessary. A loose floormat could slip and hinder proper functioning of the pedals. Do not place several floormats on top of each other as this may impair pedal movement. X Slide the seat backwards. To install: place the floormat in the footwell. X Press studs : onto retainers ;. X X To remove: pull the floormat off retainers ;. X Remove the floormat. 277 278 278 282 283 Maintenance and care Useful information ............................ Engine compartment ........................ Maintenance ...................................... Care .................................................... 278 Engine compartment Useful information i This Operator's Manual describes all Maintenance and care models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). Engine compartment Hood Opening the hood G WARNING Do not pull the release lever while the vehicle is in motion. Otherwise, the hood could be forced open by passing air flow. This could cause the hood to come loose and injure you and/or others. G WARNING Do not open the hood when the engine is overheated. You could be seriously injured. Observe the coolant temperature gauge to determine whether the engine may be overheated. If you see flames or smoke coming from the engine compartment, move away from the vehicle. Wait until the engine has cooled. If necessary, call the fire department. G WARNING There is a risk of injury if the hood is open, even if the engine is not running. Some engine components can become very hot. To avoid the risk of burns, only touch those components described in the Operator's Manual and observe the relevant safety notes. G WARNING To help prevent personal injury, stay clear of moving parts when the hood is open and the engine is running. The radiator fan may continue to run for approximately 30 seconds or may even restart after the engine has been turned off. Stay clear of fan blades. G WARNING The engine is equipped with a transistorized ignition system. Because of the high voltage, it is dangerous to touch any components (ignition coils, spark plug sockets, diagnostic socket) of the ignition system: Rwith the engine running starting the engine Rwhen the ignition is switched on and the engine is turned manually Rwhile X Make sure that the windshield wipers are switched off. G WARNING The windshield wipers and wiper linkage could be set in motion. When the hood is open, you or others could be injured by the wiper linkage. Make sure that the windshield wipers are switched off. Remove the SmartKey or make sure that no ignition position has been selected with KEYLESS-GO. All indicator lamps must be off in the instrument cluster. Engine compartment X Pull release lever : for the hood. The hood is released. ! Make sure that the windshield wipers are not folded away from the windshield. You could otherwise damage the windshield wipers or the hood. Engine oil Notes on the oil level Depending on the driving style, the vehicle consumes up to 0.9 US qts. (0.8 l) of oil over a distance of 600 miles (1000 km). The oil consumption may be higher than this when the vehicle is new or if you frequently drive at high engine speeds. Reach into the gap, pull hood catch handle ; up and lift the hood. Once you have lifted the hood about 15 inches (40 cm), it is automatically opened the rest of the way and held open by the gas-filled struts. Closing the hood G WARNING When closing the hood, use extreme caution not to catch hands or fingers. Be careful that you do not close the hood on anyone. Make sure the hood is securely engaged before driving off. Do not continue driving if the hood can no longer engage after an accident, for example. The hood could otherwise come loose while the vehicle is in motion and injure you and/or others. X Lower the hood and let it fall from a height of approximately 8 inches (20 cm). X Check that the hood has engaged properly. If the hood can be raised slightly, it is not properly engaged. Open it again and close it with a little more force. Maintenance and care Checking the oil level using the oil dipstick X 279 X Park the vehicle on a level surface. To check the oil level with the engine at normal operating temperature, switch the engine off and wait for approximately five minutes. X Pull oil dipstick : out of the dipstick guide tube. X Wipe off oil dipstick :. X Slowly slide oil dipstick : into the guide tube to the stop, and take it out again. If the level is between MIN mark = and MAX mark ;, the oil level is correct. X If the oil level has sunk to MIN mark = or below, add 0.55 to 1.1 US qt(0.5 to 1.0 liter) engine oil. Adding engine oil G WARNING If engine oil comes into contact with hot engine parts, it may ignite and you could burn Z 280 Engine compartment yourself. Do not spill any engine oil on hot engine parts. H Environmental note When adding oil, take care not to spill any. If oil enters the soil or waterways, it is harmful to the environment. Maintenance and care ! Use only engine oils and oil filters that have been approved for vehicles equipped with a service system. A list of the engine oils and oil filters tested and approved in accordance with the Mercedes-Benz Specifications for Service Products can be called up by visiting http:// www.mbusa.com (USA only). More information about tested and approved engine oils and oil filters is available from any authorized Mercedes-Benz Center. Damage to the engine or exhaust system is caused by the following: Rusing engine oils and oil filters which have not been specifically approved for the service system. Rreplacing the engine oil or oil filter after the replacement interval required by the service system has elapsed Rusing engine oil additives. ! Do not add too much oil. If the oil level is above the "max" mark on the dipstick, too much oil has been added. This can lead to damage to the engine or the catalytic converter. Have excess oil siphoned off. X Turn cap : counterclockwise and remove it. X Add engine oil. If the oil level is at or below the MIN mark on the oil dipstick, add 0.55 to 1.1 US qt (0.5 to 1.0 l) engine oil. X Replace cap : on the filler neck and turn clockwise. Ensure that the cap locks into place securely. X Check the oil level again with the oil dipstick (Y page 279). Further information on engine oil (Y page 349). Checking and adding other service products Checking the coolant level Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. X Turn the SmartKey to position 2 (Y page 137) in the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop button twice (Y page 137). X Check the coolant temperature display in the instrument cluster. The coolant temperature must be below 158 ‡ (70 †). G WARNING In order to avoid any potentially serious burns: Ruse Example: engine oil cap extreme caution when opening the hood if there are any signs of steam or coolant leaking from the cooling system, or if the coolant temperature display indicates that the coolant is overheated. Rdo not remove the pressure cap on the coolant reservoir if the coolant temperature is above 158 ‡ (70 †). Allow the engine to cool down before removing the cap. The Engine compartment Windshield washer system and headlamp cleaning system The washer fluid reservoir is used for both the windshield washer system and the headlamp cleaning system. i Vehicle components and their service products must match. You should, therefore, only use products that have been tested and approved by Mercedes-Benz. Information on tested and approved products can be obtained at any authorized Mercedes-Benz Center or on the Internet at http://www.mbusa.com (USA only). G WARNING Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. ! At temperatures below freezing: always X Slowly turn cap : half a turn counterclockwise and allow excess pressure to escape. X Turn cap : further counter-clockwise and remove it. If the coolant is at the level of marker bar = in the filler neck when cold, there is enough coolant in coolant expansion tank ;. If the coolant is approximately 0.6 in (1.5 cm) above marker bar = in the filler neck when warm, there is enough coolant in coolant expansion tank ;. X If necessary, add coolant that has been tested and approved by Mercedes-Benz. X Replace cap : and turn it clockwise as far as it will go. fill the washer fluid reservoir with a mix of water and windshield washer concentrate (e.g. MB WinterFit). There is otherwise a risk of damaging the windshield washer system/headlamp cleaning system. ! Only use washer fluid concentrate which is suitable for plastic lenses. Unsuitable washer fluid concentrate could damage the plastic lenses of the headlamps. ! Do not add distilled or de-ionized water to the washer fluid container. Otherwise, the level sensor may be damaged. i Add windshield washer concentrate, e.g. MB SummerFit, to the washer fluid all year round. For further information on coolant, see (Y page 350). Z Maintenance and care coolant reservoir contains hot fluid and is under pressure. Rusing a rag, slowly turn the cap approximately 1/2 turn to relieve excess pressure. If opened immediately, scalding hot fluid and steam will be blown out under pressure. Rdo not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn if it comes into contact with hot engine parts. 281 Maintenance Maintenance and care 282 Example: washer fluid reservoir X Mix the windshield washer fluid in a container beforehand. X At temperatures above freezing: fill the washer fluid reservoir with a mix of water and windshield washer concentrate (e.g. MB SummerFit). X At temperatures below freezing: fill the washer fluid reservoir with a mix of water and windshield washer concentrate (e.g. MB WinterFit). Adapt the mixing ratio to the outside temperature. For information on the mixing ratio (Y page 351). X To open: pull cap : upwards by the tab. X Add the premixed washer fluid. X To close: press cap : onto the filler neck until it engages. Brake fluid level ! If you notice that the brake fluid level in the brake fluid reservoir has fallen to the MIN mark or less, check the brake system immediately for leaks. Also check the thickness of the brake linings. Contact a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center immediately. Do not add brake fluid. This does not correct the error. Only check the brake fluid level when the vehicle is stationary and on a level surface. The brake fluid level is correct if it is between MIN marking ; and MAX marking : on the brake fluid reservoir. Maintenance Service interval display Service messages Information on the type of service and service intervals (see separate Service Booklet). You can obtain further information from an authorized Mercedes-Benz Center or at http://www.mbusa.com (USA only). The service interval display informs you of the next service due date. If a service due date has been exceeded, you also hear an acoustic signal. The multifunction display shows a service message for a few seconds, e.g. Next service A due in .. days Service A due Service A overdue by ... days The letter indicates which service is due. A stands for a minor service and B for a major service. A number or another letter may be displayed after the letter. This figure indicates any necessary additional maintenance work to be performed. You can obtain further information from an authorized Mercedes-Benz Center. The service interval display does not take into account any periods of time during which the battery is disconnected. Care X Note down the service due date displayed in the multifunction display before disconnecting the battery. or X Subtract the battery disconnection periods from the service date shown on the display after reconnecting the battery. i The service interval display does not provide any information regarding the engine's oil level. Observe the notes on the engine oil level (Y page 279). Hiding a service message X Press the % or a button on the steering wheel. Displaying service messages X Switch on the ignition. Press = or ; on the steering wheel to select the Serv. menu. X Press 9 or : to select the ASSYST PLUS submenu and press a to confirm. The service due date appears in the multifunction display. X Please bear the following in mind Resetting service interval display If the qualified specialist workshop, e.g. a Mercedes-Benz Center, carried out the maintenance work, the service interval display will be reset. Further information, on maintenance for example, can be obtained at an authorized Mercedes-Benz Center or directly from Mercedes-Benz. ! If the service interval display has been lead to increased wear and damage to the major assemblies or the vehicle. Driving abroad An extensive Mercedes-Benz Service network is also available in other countries. You can obtain further information from any authorized Mercedes-Benz Center. Care Notes on care Regular care of your vehicle is a condition for retaining the quality in the long term. Use care products and cleaning agents recommended and approved by MercedesBenz. G WARNING Many cleaning products can be hazardous. Some are poisonous, others are flammable. Always follow the instructions on the particular container. Always open your vehicle's doors or windows when cleaning the inside. Never use fluids or solvents that are not designed for cleaning your vehicle. Always lock away cleaning products and keep them out of reach of children. ! For cleaning your vehicle, do not use any of the following: Rdry, rough or hard cloths cleaning agents Rsolvents Rcleaning agents containing solvents Do not scrub. Do not touch the surfaces or protective films with hard objects, e.g. a ring or ice scraper. You could otherwise scratch or damage the surfaces and protective film. Rabrasive reset unintentionally, have the setting corrected at a Mercedes-Benz Center. Have service work carried out as described in the Service Booklet. This may otherwise Z Maintenance and care Maintaining the time-dependent service schedule: 283 284 Care H Environmental note Dispose of empty packaging and cleaning cloths in an environmentally responsible manner. Maintenance and care ! Do not park the vehicle for an extended period straight after cleaning it, particularly after having cleaned the wheels with wheel cleaner. Wheel cleaners could cause increased corrosion of the brake discs and brake pads/linings. For this reason, you should drive for a few minutes after cleaning. Braking heats the brake discs and the brake pads/linings, thus drying them. The vehicle can then be parked. Exterior care Automatic car wash G WARNING Braking efficiency is reduced after washing the vehicle. This could cause an accident. For this reason, you must drive particularly carefully after washing the vehicle until the brakes have dried. You can wash the vehicle in an automatic car wash from the very start. ! Never clean your vehicle in a Touchless Automatic Car Wash as these use special cleaning agents. These cleaning agents can damage the paintwork or plastic parts. If the vehicle is very dirty, pre-wash it before cleaning it in an automatic car wash. ! Make sure that the automatic transmission is in position N when washing your vehicle in a tow-through car wash. The vehicle could be damaged if the transmission is in another position. ! Make sure that: Rthe side windows and the sliding sunroof are fully closed. ventilation/heating is switched off (the OFF button has been pressed). Rthe windshield wiper switch is in position 0. Otherwise, the vehicle might be damaged. Rthe After using an automatic car wash, wipe off wax from the windshield and the wiper blades. This will prevent smears and reduce wiping noises caused by residue on the windshield. Washing by hand In some countries, washing by hand is only allowed at specially equipped washing bays. Observe the legal requirements in all countries concerned. X Do not use hot water and do not wash the vehicle in direct sunlight. X Use a soft sponge to clean. X Use a mild cleaning agent, such as a car shampoo approved by Mercedes-Benz. X Thoroughly hose down the vehicle with a gentle jet of water. X Do not point the water jet directly towards the air inlet. X Use plenty of water and rinse out the sponge frequently. X Rinse the vehicle with clean water and dry thoroughly with a chamois. X Do not let the cleaning agent dry on the paintwork. When using the vehicle in winter, remove all traces of road salt deposits carefully and as soon as possible. Power washers G WARNING Do not use power washers with circular-jet nozzles (dirt grinders) to clean your vehicle, in particular the tires. You could otherwise damage the tires and cause an accident. Care 11.8 in (30 cm) between the vehicle and the power washer nozzle. Information about the correct distance is available from the equipment manufacturer. Move the power washer nozzle around when cleaning your vehicle. Do not aim directly at any of the following: Rtires Rdoor gaps, roof gaps, joints etc. components Rbattery Rconnectors Rlights Rseals Rtrim elements Rventilation slots Damaged seals or electrical components can lead to leaks or failures. Relectrical Cleaning the wheels ! Do not use acidic wheel cleaning products to remove brake dust. This could damage wheel bolts and brake components. ! Do not park the vehicle for an extended period straight after cleaning it, particularly after having cleaned the wheels with wheel cleaner. Wheel cleaners could cause increased corrosion of the brake discs and brake pads/linings. For this reason, you should drive for a few minutes after cleaning. Braking heats the brake discs and the brake pads/linings, thus drying them. The vehicle can then be parked. Cleaning the paintwork Scratches, corrosive deposits, areas affected by corrosion and damage caused by inadequate care cannot always be completely repaired. In such cases, visit a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. X Remove impurities immediately, where possible, whilst avoiding rubbing too hard. X Soak insect remains with insect remover and rinse off the treated areas afterwards. X Soak bird droppings with water and rinse off the treated areas afterwards. X Remove coolant, brake fluid, tree resin, oils, fuels and greases by rubbing gently with a cloth soaked in petroleum ether or lighter fluid. X Use tar remover to remove tar stains. X Use silicone remover to remove wax. ! Do not affix: Rstickers Rfilms Rmagnetic plates or similar items to painted surfaces. You could otherwise damage the paintwork. If water no longer forms "beads" on the paint surface, use the paint care products recommended and approved by MercedesBenz. This is the case approximately every three to five months, depending on the climate conditions and the care product used. If dirt has penetrated the paint surface or the paint has become dull, the paint cleaner recommended and approved by MercedesBenz should be used. Do not use these care products in the sun or on the hood while the hood is hot. X Use a suitable touch-up stick, e.g. MB Touch-Up Stick, to correct smaller areas of paint damage quickly and provisionally. Matte finish care If your vehicle has a clear matte finish, observe the following instructions in order to avoid damage to the paintwork due to incorrect care. These notes also apply to light alloy wheels with a clear matte finish. Z Maintenance and care ! Always maintain a distance of at least 285 286 Care ! Never polish the vehicle or the light alloy wheels. Polishing causes the finish to shine. ! The following may cause the paint to become shiny and thus reduce the matte effect: rubbing with unsuitable materials. RFrequent use of car washes. RWashing the vehicle in direct sunlight. Maintenance and care RVigorous ! Never use paint cleaner, buffing or polishing products, or gloss preserver, e.g. wax. These products are only suitable for high-gloss surfaces. Their use on vehicles with matte finish leads to considerable surface damage (shiny, spotted areas). Always have paintwork repairs performed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. ! Do not use wash programs with a hot wax treatment under any circumstances. i The vehicle should preferably be washed by hand using a soft sponge, car shampoo and plenty of water. i Use only insect remover and car shampoo from the range of recommended and approved Mercedes-Benz care products. Cleaning the windows G WARNING Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you. ! Only fold the windshield wipers away from the windshield when vertical. Otherwise, you will damage the hood. X Clean the inside and outside of the windows with a damp cloth and a cleaning agent that is recommended and approved by Mercedes-Benz. ! Do not use dry cloths, abrasive products, solvents or cleaning agents containing solvents to clean the inside of the windows. Do not touch the insides of the windows with hard objects, e.g. an ice scraper or ring. There is otherwise a risk of damaging the windows. ! Clean the water drainage channels of the windshield and the rear window at regular intervals. Deposits such as leaves, petals and pollen may under certain circumstances prevent water from draining away. This can lead to corrosion damage and damage to electronic components. Cleaning the wiper blades G WARNING Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you. ! Only fold the windshield wipers away from the windshield when vertical. Otherwise, you will damage the hood. ! Do not pull the wiper blade. Otherwise, the wiper blade could be damaged. ! Do not clean wiper blades too often and do not rub them too hard. Otherwise, the graphite coating could be damaged. This could cause wiper noise. Care X Fold the wiper arms away from the windshield. X Carefully clean the wiper blades with a damp cloth. X Fold the windshield wipers back again before switching on the ignition. 287 about the correct distance is available from the equipment manufacturer. Cleaning the rear view camera ! Hold the wiper arm securely when folding Cleaning the exterior lighting X Clean the plastic lenses of the exterior lights with a wet sponge and a mild cleaning agent, e.g. Mercedes-Benz car shampoo or cleaning cloths. ! Only use cleaning agents or cleaning cloths which are suitable for plastic light lenses. Unsuitable cleaning agents or cleaning cloths could scratch or damage the plastic light lenses. Cleaning the sensors X Use clear water and a soft cloth to clean camera lens :. ! Do not clean the camera lens and the area around the rear view camera with a power washer. Cleaning the exhaust tail pipes Impurities combined with the effects of road grit and corrosive environmental factors may cause flash rust to form on the surface. You can restore the original shine of the exhaust tail pipe by cleaning it regularly, especially in winter and after washing. ! Do not clean the exhaust tail pipes with alkaline-based cleaning agents, such as wheel cleaner. X X Clean the exhaust tail pipes with a chrome care product tested and approved by Mercedes-Benz. Clean sensors : of the driving systems with water, car shampoo and a soft cloth. ! When cleaning the sensors with a power washer, maintain a distance between the vehicle and the nozzle of the power washer of at least 11.8 in (30 cm). Information Z Maintenance and care back. The windshield could be damaged if the wiper arm smacks against it suddenly. Care 288 Interior care Cleaning the display X Maintenance and care Before cleaning the display, make sure that it is switched off and has cooled down. X Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner. X Dry the display surface using a dry microfiber cloth. ! For cleaning, do not use any of the X Wipe the plastic trim with a damp, lint-free cloth, e.g. a microfiber cloth. X Heavy soiling: use car care and cleaning products recommended and approved by Mercedes-Benz. The surface may change color temporarily. Wait until the surface is dry again. Cleaning the steering wheel and gear or selector lever X following: Ralcohol-based thinner or gasoline cleaning agents Rcommercially-available household cleaning agents These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display. Rabrasive Cleaning the plastic trim G WARNING When cleaning the steering wheel boss and dashboard, do not use cockpit sprays or cleaning agents containing solvents. Cleaning agents containing solvents cause the surface to become porous, and as a result, plastic parts may break away and be thrown around the interior when an air bag is deployed, which may result in severe injuries. ! Do not affix the following to plastic surfaces: Rstickers Rfilms Rscented oil bottles or similar items You can otherwise damage the plastic. ! Do not allow cosmetics, insect repellent or sunscreen to come into contact with the plastic trim. This maintains the high-quality look of the surfaces. Thoroughly wipe with a damp cloth or use leather care agents that have been recommended and approved by MercedesBenz. Cleaning genuine wood and trim elements X Wipe the wooden trim and trim pieces with a damp, lint-free cloth, e.g. a microfiber cloth. X Heavy soiling: use car care and cleaning products recommended and approved by Mercedes-Benz. ! Do not use solvent-based cleaning agents such as tar remover, wheel cleaners, polishes or waxes. There is otherwise a risk of damaging the surface. ! Do not use chrome polish on trim pieces. The trim pieces have a chrome look but are mostly made of anodized aluminum and can lose their shine if chrome polish is used. Use a damp, lint-free cloth instead when cleaning the trim pieces. If the chrome-plated trim pieces are very dirty, you can use a chrome polish. If you are unsure as to whether the trim pieces are chrome-plated or not, consult an authorized Mercedes-Benz Center. Cleaning the seat covers ! Do not use microfiber cloths to clean genuine leather, artificial leather or Alcantara® covers. If used often, these can damage the cover. Care Rclean genuine leather covers carefully with a damp cloth and then wipe the covers down with a dry cloth. Make sure that the leather does not become soaked. It may otherwise become rough and cracked. Only use leather care agents that have been tested and approved by Mercedes-Benz. You can obtain these from a qualified specialist workshop, e.g. a Mercedes-Benz Service center. Rclean artificial leather covers with a cloth moistened with a solution containing 1% detergent (e.g. dish washing liquid). Rclean cloth covers with a microfiber cloth moistened with a solution containing 1% detergent (e.g. dish washing liquid). Rub carefully and always wipe entire seat sections to avoid leaving visible lines. Leave the seat to dry afterwards. Cleaning results depend on the type of dirt and how long it has been there. Rclean Alcantara® covers with a damp cloth. Make sure you wipe entire seat sections to avoid leaving visible lines. Cleaning the headliner and carpets X Headliner: use a soft brush or a cleaning agent recommended and approved by Mercedes-Benz to remove heavy soiling. X Carpets: use the carpet and textile cleaning agents recommended and approved by Mercedes-Benz. Maintenance and care ! Observe the following when cleaning: i Note that regular care is essential to ensure that the appearance and comfort of the covers is retained over time. Cleaning the seat belts X 289 Use clean, lukewarm water and soap solution. ! Do not clean the seat belts using chemical cleaning agents. Do not dry the seat belts by warming them above 176 ‡ (80 †) or placing them in direct sunlight. G WARNING Do not bleach or dye seat belts as this may severely weaken them. In a crash, they may not be able to provide adequate protection. Z 290 291 292 292 293 298 301 302 305 Breakdown assistance Useful information ............................ Where will I find...? ........................... Flat tire .............................................. Battery ............................................... Jump-starting .................................... Towing and tow-starting .................. Fuses .................................................. Where will I find...? 292 Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. Breakdown assistance i Please read the information on qualified specialist workshops (Y page 24). Where will I find...? First-aid kit Depending on the vehicle's equipment, the first-aid kit is located either in an open stowage space or behind the cover on the left side. X Open the trunk lid. Example: first-aid kit behind the side trim panel X To open the cover: turn rotary knob : in the direction of the arrow and fold down cover ;. X Remove the first-aid kit. Example: first-aid kit in an open stowage space X Remove first-aid kit :. i Check the expiration date on the first-aid kit at least once a year. Replace the contents if necessary, and replace missing contents. Vehicle tool kit The vehicle tool kit can be found in the stowage well under the trunk floor. X Lift the trunk floor up (Y page 258). : Vehicle tool kit tray ; Stowage well = Spare wheel/"Minispare" emergency spare wheel The vehicle tool kit contains: Rfolding Rfuse wheel chock allocation chart Rjack Rone pair of gloves Flat tire wrench eye Rtowing "Minispare" emergency spare wheel The "Minispare" emergency spare wheel can be found in the stowage well under the trunk floor. X Lift the trunk floor up (Y page 258). X Remove tool kit tray :. X Turn stowage well ; counterclockwise and remove it. X Remove "Minispare" emergency spare wheel =. For further information on changing a wheel and mounting the spare wheel, see (Y page 293). X Firmly depress the parking brake. X Bring the front wheels into the straightahead position. X Vehicles with manual transmission: engage first or reverse gear. X Vehicles with automatic transmission: move the selector lever to P. X Switch off the engine. X Vehicles without KEYLESS-GO: remove the SmartKey from the ignition lock. X Vehicles with KEYLESS-GO: open the driver's door. The on-board electronics have status 0, which is the same as the SmartKey having been removed. X Vehicles with KEYLESS-GO: remove the Start/Stop button from the ignition lock (Y page 137). X All occupants must get out of the vehicle. Make sure that they are not endangered as they do so. X Make sure that no one is near the danger area while a wheel is being changed. Anyone who is not directly assisting in the wheel change should, for example, stand behind the barrier. X Get out of the vehicle. Pay attention to traffic conditions when doing so. X Close the driver's door. Flat tire Preparing the vehicle Your vehicle may be equipped with a "Minispare" emergency spare wheel or MOExtended tires (tires with run-flat properties) (Y page 297). i Vehicle preparation is not necessary on vehicles with MOExtended tires. X Stop the vehicle as far away as possible from traffic on solid, non-slippery and level ground. X Switch on the hazard warning lamps. Changing a wheel and mounting the spare wheel Preparing the vehicle G WARNING The wheel and tire size of the emergency spare wheel/spare wheel may differ to that of the damaged wheel. When using an emergency spare wheel/spare wheel the handling characteristics of the vehicle may change. Adapt your style of driving accordingly. Z Breakdown assistance Rlug 293 Flat tire 294 Never operate the vehicle with more than one emergency spare wheel/spare wheel that differs in size. Only use an emergency spare wheel/spare wheel of a differing size briefly and do not switch off ESP®. When using an emergency spare wheel, you must not exceed the maximum speed of 50 mph (80 km/h). Breakdown assistance G WARNING Have the emergency spare wheel/spare wheel replaced with a new wheel as soon as possible at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required. Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. Securing the vehicle to prevent it from rolling away G WARNING Only jack up the vehicle on level ground or on slight inclines/declines. The vehicle could otherwise fall off the jack and injure you or others. If your vehicle is equipped with a wheel chock, it can be found in the vehicle tool kit (Y page 292). The folding wheel chock is an additional securing measure to prevent the vehicle from rolling away, for example when changing a wheel. i Vehicles without a spare wheel/ emergency spare wheel are not equipped with a tire-change tool kit at the factory. For more information on which tools are required to perform a wheel change on your vehicle, e.g. wheel chock, lug wrench or alignment bolt, consult an authorized Mercedes-Benz Center. X Prepare the vehicle as described (Y page 293). X Remove the following items (depending on the vehicle's equipment) from the stowage well under the trunk/trunk floor: Rthe emergency spare wheel Rthe folding wheel chock Rthe lug wrench Rthe jack X Secure the vehicle to prevent it from rolling away. X Fold both plates upwards :. X Fold out lower plate ;. X Guide the lugs on the lower plate fully into the openings in base plate =. Securing the vehicle on level ground X On level ground: place chocks or other suitable items under the front and rear of the wheel that is diagonally opposite the wheel you wish to change. Securing the vehicle on slight downhill gradients X On downhill gradients: place chocks or other suitable items in front of the wheels of the front and rear axle. the jack. Do not disengage the parking brake while the vehicle is raised. Make sure that the ground on which the vehicle is standing and where you place the jack is solid, level and not slippery. If necessary, use a large underlay. On slippery surfaces, such as tiled floors, you should use a non-slip underlay, for example a rubber mat. Do not use wooden blocks or similar objects as a jack underlay. Otherwise, the jack may not be able to achieve its load-bearing capacity if it is not at its full height. Never start the engine when the vehicle is raised. Also observe the notes on the jack. Raising the vehicle G WARNING When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up the vehicle at the jacking points built into both sides of the vehicle. The jack saddle must be placed centrally under the jacking point. The jack must always be vertical when in use, especially on inclines or declines. The jack is intended only for lifting the vehicle briefly for wheel changes. It is not suited for performing maintenance work under the vehicle. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack. Keep hands and feet away from the area under the lifted vehicle. Always lower the vehicle onto sufficient capacity jackstands before working under the vehicle. Always firmly engage the parking brake and block the wheels with wheel chocks or other sizable objects before raising the vehicle with X Using lug wrench :, loosen the bolts on the wheel you wish to change by about one full turn. Do not unscrew the bolts completely. The jacking points are located just behind the wheel housings of the front wheels and just in front of the wheel housings of the rear wheels (arrows). Z 295 Breakdown assistance Flat tire Flat tire 296 G WARNING The jack is designed exclusively for jacking up the vehicle at the jacking points. The jack saddle must be placed centrally under the jacking point. If you do not position the jack correctly in the jacking point, the vehicle can fall off the jack and seriously or fatally injure you or others. ! The jack is designed exclusively for Breakdown assistance jacking up the vehicle at the jacking points. Otherwise, your vehicle could be damaged. X Position jack = at jacking point ;. Removing a wheel X Unscrew the wheel bolts. ! Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in. X Remove the wheel. Mounting a new wheel G WARNING Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be repaired immediately. Do not continue to drive under these circumstances! Contact an authorized Mercedes-Benz Center or call Roadside Assistance. Incorrect wheel bolts or improperly tightened wheel bolts can cause the wheel to come off. This could cause an accident. Make sure to use the correct wheel bolts. G WARNING Only use genuine Mercedes-Benz wheel bolts. Other wheel bolts may come loose. Do not tighten the wheel bolts when the vehicle is raised. Otherwise, the vehicle could fall off the jack. G WARNING X Make sure that the base of the jack is positioned directly under the jacking point. X Turn crank ? clockwise until jack = sits completely on jacking point ; and the base of the jack lies evenly on the ground. X Turn crank ? until the tire is raised a maximum of 1.2 inches (3 cm) off the ground. Make sure to use the original length wheel bolts when remounting the original wheel after it has been repaired. X Clean the wheel and wheel hub contact surfaces. ! To prevent damage to the paintwork, hold the wheel securely against the wheel hub while screwing in the first wheel bolt. Flat tire 297 change tool kit in the trunk/cargo compartment. X Transport the defective wheel in the trunk/ cargo compartment. or X Place the emergency spare wheel on the wheel hub and push it on. X Tighten the wheel bolts until they are finger-tight. Lowering the vehicle X Turn the crank of the jack counterclockwise until the vehicle is once again standing firmly on the ground. X Place the jack to one side. Depending on the size of the wheel, you may also be able to secure the defective wheel in the spare wheel well. In this case, you will have to remove the stowage well casing from the spare wheel well and stow it securely in the trunk/cargo compartment. i USA only: when you are driving with the emergency spare wheel mounted, the tire pressure monitoring system cannot function reliably. Only restart the tire pressure monitoring system when the defective wheel has been replaced with a new wheel. All wheels mounted must be equipped with functioning sensors. The defective wheel should no longer be in the vehicle. MOExtended tires (tires with run-flat properties) X Tighten the wheel bolts evenly in a crosswise pattern in the sequence indicated (: to A). The tightening torque must be 96 lb-ft (130 Nm). G WARNING Have the tightening torque checked immediately after a wheel is changed. The wheels could come loose if they are not tightened to a torque of 96 lb/ft (130 Nm). X Turn the jack back to its initial position and store it together with the rest of the tire- MOExtended tires (tires with run-flat properties) allow you to continue driving your vehicle even if one or more tires are entirely deflated. MOExtended tires may only be used in conjunction with the activated tire pressure loss warning system or with the activated tire pressure monitoring system. The maximum permissible distance which can be driven in run-flat mode depends on the load in the vehicle. You can drive 50 miles (80 km) if the vehicle is partially laden and 18 miles (30 km) if it is fully laden. The maximum permissible distance which can be driven in run-flat mode is counted from the moment the tire pressure loss warning appears in the multifunction display. You must not exceed a maximum speed of 50 mph (80 km/h). Z Breakdown assistance X 298 Battery G WARNING The handling characteristics of your vehicle deteriorate in run-flat mode, for example: Breakdown assistance Rwhen cornering Rwhen braking Rwhen accelerating rapidly Adapt your driving style accordingly and avoid sudden changes in direction and sudden acceleration, as well as driving over obstacles (i.e. curbs, potholes), and driving off-road. This is particularly the case when the vehicle is heavily laden. The maximum permissible distance that can be driven in run-flat mode depends to a large extent on the loads placed on the vehicle. It can be shorter due to high speeds, a heavy load, sudden changes in direction, the road surface condition, outside temperature, etc., or further if you drive carefully and conservatively. Do not continue to drive in run-flat mode if: Ryou hear banging noises. vehicle starts to shake. Ryou see smoke and smell rubber. Rthe RESP® is intervening constantly. are tears in the sidewalls of the tire. After driving in run-flat mode, you must have the wheel(s) checked for damage at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required. The defective tire must be replaced in every case. Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. Rthere i When replacing one or all tires, make sure that you only use tires marked MOExtended and of the specified size for the vehicle. Battery Important safety notes In order for the battery to achieve the maximum possible service life, it must always be sufficiently charged. ! Have the battery checked regularly at a qualified specialist workshop, such as an authorized Mercedes-Benz Center. Adhere to the service intervals indicated in the service booklet or ask a qualified specialist workshop, such as an authorized Mercedes-Benz Center. Have the battery charge checked more frequently if you use the vehicle mainly for short trips or if you leave it standing idle for a lengthy period. Only replace a battery with a battery that has been recommended by Mercedes-Benz. Consult an authorized Mercedes-Benz Center if you wish to leave your vehicle parked for a long period of time. G WARNING Comply with safety precautions and take protective measures when handling batteries. Risk of explosion Fire, naked flames and smoking are prohibited when handling the battery. Avoid creating sparks. Battery acid is caustic. Avoid contact with the skin, eyes or clothing. Wear suitable protective clothing, in particular gloves, an apron and a face mask. Immediately rinse acid splashes off with clean water. Consult a doctor if necessary. Battery Keep children away. Observe this Operator's Manual. H Environmental note Batteries contain dangerous substances. It is against the law to dispose of them with the household rubbish. They must be collected separately and recycled to protect the environment. Dispose of batteries in an environmentally friendly manner. Return discharged batteries to a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, or to a special collection point for old batteries. G WARNING Failure to follow these instructions can result in severe injury or death. Never lean over batteries while connecting. You might get injured. Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or clothing. In case it does, immediately flush affected area with water and seek medical help if necessary. A battery will also produce hydrogen gas, which is flammable and explosive. Keep flames or sparks away from battery, avoid improper connection of jumper cables, smoking etc. G WARNING Do not place any metal objects on the battery as this could result in a short circuit. Use leak-proof batteries only to avoid the risk of acid burns in the event of an accident. Take care that you do not become statically charged, e.g. by wearing synthetic clothing or rubbing against textiles. For this reason, you also should not pull or push the battery over carpets or other synthetic materials. Never touch the battery first. First, touch the outside body of the vehicle in order to release any possible electrostatic charges. Do not rub the battery with rags or cloths. The battery could explode if touched due to electrostatic charge or due to spark formation. ! Before working on the battery, e.g. loosening the battery terminals, switch off the engine and remove the SmartKey from the ignition. On vehicles with KEYLESS-GO, make sure that the ignition is switched off. Check that all the indicator lamps in the instrument cluster are off. You may otherwise destroy electronic components, such as the alternator. ! Like other batteries, the vehicle battery may discharge over time if you do not use the vehicle. In this case have the battery checked at a qualified specialist workshop, such as an authorized Mercedes-Benz Center. You can also charge the battery with a charger recommended by MercedesBenz. Contact an authorized MercedesBenz Center for more information. The battery and the cover of the positive terminal clamp must be installed securely during operation. i Remove the SmartKey if you park the vehicle and do not require any electrical consumers. The vehicle will then use very little energy, thus conserving battery power. Z Breakdown assistance Wear eye protection. 299 300 Battery Mercedes-Benz recommends that you do not carry out work on batteries yourself, e.g. removing or charging. Always have this work performed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. ! Only charge the installed battery with a i If the power supply has been interrupted, ! Only use battery chargers with a e.g. if the battery has been reconnected, you must carry out the following tasks: Breakdown assistance Rset the clock; see the separate operating instructions. Rreset the function for automatically folding the exterior mirrors in/out by folding the mirrors out once (Y page 102)23 Charging the battery G WARNING Never charge a battery still installed in the vehicle unless a battery charger unit approved by Mercedes-Benz is being used. Gases may escape during charging and cause explosions that may result in paint damage, corrosion or personal injury. A battery charger unit specially adapted for Mercedes-Benz vehicles and tested and approved by Mercedes-Benz is available as an accessory. It permits the charging of the battery in its installed position. Contact an authorized Mercedes-Benz Center for further information and availability. Charge the battery in accordance with the separate instructions for the battery charger. G WARNING There is a risk of acid burns during the charging process due to the gases which escape from the battery. Do not lean over the battery during the charging process. G WARNING Battery acid is caustic. Avoid contact with the skin, eyes or clothing. 23 This function is only available in vehicles for Canada. battery charger which has been tested and approved by Mercedes-Benz. These battery chargers allow the battery to be charged while still installed. maximum charging voltage of 14.8 V. ! Only charge the battery using the jumpstarting connection point. The jump-starting connection point is in the engine compartment (Y page 301). X Open the hood (Y page 278). X Connect the battery charger to the positive terminal and earth point in the same order as when connecting the donor battery in the jump-starting procedure (Y page 301). X Read the battery charger's operating instructions before charging the battery. Jump-starting 301 Jump-starting Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connecting or jump starting. You might get injured. Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or clothing. In case it does, immediately flush affected area with water, and seek medical help if necessary. A battery will also produce hydrogen gas, which is flammable and explosive. Keep flames or sparks away from battery, avoid improper connection of jumper cables, smoking, etc. Attempting to jump start a frozen battery can result in it exploding, causing personal injury. Read all instructions before proceeding. ! Avoid repeated and lengthy starting attempts. Otherwise, non-combusted fuel may damage the catalytic converter24 and create a risk of fire. Do not use a rapid-charging device to start the engine. Make sure the jumper cables are not damaged. Make sure the jumper cables are not touching any other metal objects when they are connected to the battery. If your vehicle's battery is discharged, the engine can be jump-started from another vehicle or from a second battery using jumper cables. Observe the following points: X The battery is not accessible in all vehicles. If the other vehicle's battery is not accessible, jump-start the vehicle using a second battery or a jump-starting device. X Only jump-start the vehicle when the engine is cold and the catalytic converter system has cooled down25. X Do not start the engine if the battery is frozen. Let the battery thaw first. X Jump-starting may only be performed from batteries with a nominal voltage of 12 V. X Only use jumper cables which have a sufficient cross-section and insulated terminal clamps. X Make sure that the jumper cables cannot come into contact with parts, such as the pulley or the fan. These parts move when the engine is started and while it is running. X If the battery is fully discharged, leave the battery that is being used to jump-start connected for a few minutes before attempting to start. This charges the empty battery a little. i Jumper cables and further information about jump-starting can be obtained from any authorized Mercedes-Benz Center, for example. X Make sure that the two vehicles do not touch. Apply the parking brake firmly. X Manual transmission: engage neutral. X Automatic transmission: move the selector lever to P. X 24 Only 25 Only vehicles with a gasoline engine. vehicles with a gasoline engine. Z Breakdown assistance G WARNING Towing and tow-starting 302 X Breakdown assistance Switch off all electrical consumers (e.g. radio, blower, etc.). X Open the hood (Y page 278). Position number B identifies the charged battery of the other vehicle or an equivalent jumpstarting device. X Slide cover : of positive terminal ; in the direction of the arrow. X Connect positive terminal ; on your vehicle to positive terminal = of donor battery B using the jumper cable, beginning with your own battery. X Start the engine of the donor vehicle and run it at idling speed. X Connect negative terminal ? of donor battery B to earth point A of your vehicle using the jumper cable, connecting the jumper cable to donor battery B first. X Start the engine. X Allow the engine to run for a few minutes before disconnecting the jumper cable. X First, remove the jumper cable from earth point A and negative terminal ?, then from positive terminal ; and positive terminal =, each time disconnecting from the contacts on your own vehicle first. X After removing the jumper cable, close cover : on positive terminal ;. X Have the battery checked at a qualified specialist workshop, e.g. an authorized MercedesBenz Center. The jump-starting procedure is not a standard operating state; therefore, have the battery checked. Towing and tow-starting Important safety notes G WARNING If you tow the vehicle, you must use a rigid towing bar if: Rthe engine is not running. is a brake system malfunction. Rthere is a malfunction in the power supply or the vehicle's electrical system. The power assistance for the steering and the brake force booster do not work when the Rthere Towing and tow-starting engine is not running. You will need more force to steer and brake, you may have to depress the brake pedal with maximum force. Before towing away, make sure that the steering can be moved and is not locked. If you tow or tow-start another vehicle, its weight must not exceed the maximum permissible gross vehicle weight of your vehicle. The battery must be connected and charged. Otherwise, you: G WARNING The vehicle is braked when the HOLD function or DISTRONIC PLUS is activated. Therefore, deactivate HOLD and DISTRONIC PLUS if the vehicle is to be towed. automatic locking feature (Y page 78). You could otherwise be locked out when pushing or towing the vehicle. ! You may only tow the vehicle a maximum distance of 30 miles (50 km). A towing speed of 30 mph (50 km/h) must not be exceeded. For towing distances over 30 miles (50 km), the vehicle must loaded onto a transporter. ! Only secure the tow rope or tow bar at the towing eyes. Otherwise, the vehicle could be damaged. turn the SmartKey to position 2 in the ignition lock Rcannot shift the automatic transmission to position N Release the selector lever lock manually to move it out of position P (Y page 149). Rcannot i Before the vehicle is towed, switch off the Installing/removing the towing eye Installing the towing eye X Remove the towing eye from the vehicle tool kit (Y page 292). G WARNING The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover. The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers. ! Do not use the towing eye for recovery, as this could damage the vehicle. If in doubt, recover the vehicle with a crane. ! When towing, pull away slowly and smoothly. If the tractive power is too high, the vehicles could be damaged. ! Do not tow with sling-type equipment. This could damage the vehicle. ! On vehicles with KEYLESS-GO, use the SmartKey instead of the Start/Stop button. Turn the SmartKey to position 2 in the ignition lock and shift the automatic transmission to N. Then, turn the SmartKey back to 0 and leave it in the ignition lock. The automatic transmission must be in position N when the vehicle is being towed. Z Breakdown assistance It is better to have the vehicle transported than to have it towed. 303 Towing and tow-starting 304 X Press the mark on cover : inwards in the direction of the arrow. X Take cover : off the opening. X Screw the towing eye in clockwise to the stop and tighten it. Removing the towing eye X Loosen the towing eye and unscrew it. X Breakdown assistance Attach cover : to the bumper and press until it engages. X Place the towing eye in the vehicle tool kit. Towing the vehicle with the rear axle raised Only possible on vehicles without 4MATIC. When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions (Y page 302). ! The ignition must be switched off if you are towing the vehicle with the rear axle raised. Intervention by ESP® could otherwise damage the brake system. X Switch on the hazard warning lamps (Y page 109). X Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock. X When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you. Towing a vehicle with both axles on the ground When having your vehicle towed, observe the important safety notes (Y page 302). G WARNING The power assistance for the steering and the brake force booster do not work when the engine is not running. You will then need much more effort to brake and steer the vehicle. Adapt your style of driving accordingly. X Switch on the hazard warning lamps (Y page 109). i When towing with the hazard warning lamps switched on, use the combination switch as usual to signal a change of direction. In this case, only the turn signals for the desired direction flash. When the combination switch is reset, the hazard warning lamps start flashing again. X Turn the SmartKey to position 2 in the ignition lock. X When the vehicle is stationary, depress the brake pedal and keep it depressed. X Shift the automatic transmission to position N. X Release the brake pedal. X Release the parking brake. Transporting the vehicle The towing eye can be used to pull the vehicle onto a trailer or transporter for transporting purposes. X Turn the SmartKey to position 2 in the ignition lock. X Shift the automatic transmission to position N. As soon as the vehicle is loaded: X Prevent the vehicle from rolling away by applying the parking brake. X Move the selector lever to P. X Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock. X Secure the vehicle. ! Only lash the vehicle down by the wheels or wheel rims, not by parts of the vehicle such as axle or steering components. Otherwise, the vehicle could be damaged. Fuses ! Vehicles with 4MATIC must not be towed with either the front or the rear axle raised, as doing so will damage the transmission. If the vehicle has transmission damage or damage to the front or rear axle, have it transported on a transporter or trailer. In the event of damage to the electrical system If the battery is defective, the automatic transmission will be locked in position P. To shift the automatic transmission to position N, you must provide power to the vehicle's electrical system in the same way as when jump-starting (Y page 301). Have the vehicle transported on a transporter or trailer. Tow-starting (emergency starting) ! Vehicles with automatic transmission Blown fuses must be replaced with fuses of the same rating, which you can recognize by the color and value. The fuse ratings are listed in the fuse allocation chart. An authorized Mercedes-Benz Center will be happy to advise you. i If a fuse has blown, contact a breakdown service or an authorized Mercedes-Benz Center. If the newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. ! Only use fuses that have been approved for Mercedes-Benz vehicles and which have the correct fuse rating for the system concerned. Otherwise, components or systems could be damaged. Before changing a fuse X Fuses Park the vehicle and apply the parking brake. X Switch off all electrical consumers. X Remove the SmartKey from the ignition lock. Important safety notes The fuses are located in various fuse boxes: must not be started by tow-starting. This could otherwise damage the transmission. The fuses in your vehicle serve to close down faulty circuits. If a fuse blows, all the components on the circuit and their functions stop operating. G WARNING Only use fuses approved by Mercedes-Benz with the specified amperage for the system in question and do not attempt to repair or bridge a blown fuse. Using other than approved fuses or using repaired or bridged fuses may cause an overload leading to a fire, and/or cause damage to electrical components and/or systems. Have the cause determined and remedied by an authorized Mercedes-Benz Center. Rfuse box on the driver's side of the dashboard Rfuse box in the engine compartment on the left-hand side of the vehicle, when viewed in the direction of travel Rfuse box in the trunk on the right-hand side of the vehicle, when viewed in the direction of travel The fuse allocation chart is located in the vehicle tool kit (Y page 292) in the stowage compartment under the trunk floor. Dashboard fuse box ! Do not use a pointed object such as a screwdriver to open the cover in the Z Breakdown assistance Notes for 4MATIC vehicles 305 Fuses 306 dashboard. You could damage the dashboard or the cover. Breakdown assistance X X To open: pull out cover : slightly at the bottom in the direction of arrow =. X Pull cover : outwards in the direction of arrow ; and remove it. X To close: clip in cover : on the front of the dashboard. X Fold cover : inwards until it engages. Fuse box in the engine compartment X Make sure that the windshield wipers are turned off. G WARNING Make sure that the windshield wipers are switched off and that the SmartKey is removed from the ignition lock before you open the cover of the fuse box. Otherwise, the windshield wipers and the wiper rods above the cover could be set in motion. This could lead to you or others being injured by the wiper rods. X Open the hood (Y page 278). Remove any existing moisture from the fuse box using a dry cloth. X Take lines ; from the guides. X To open: open clamps :. X Remove the fuse box cover forwards. ! Make sure that no moisture can enter the fuse box when the cover is open. X To close: check whether the rubber seal is lying correctly in the cover. X Insert the cover at the rear of the fuse box into the retainer. X Fold down the cover and close clamps :. X Secure lines ; in the guides. ! The cover must be seated properly, otherwise moisture or dirt could impair the function of the fuses. X Close the hood (Y page 279). Fuse box in the trunk X Open the trunk lid (Y page 80). Fuses 307 X Breakdown assistance To open: turn rotary catch : clockwise. X Open cover ; downwards in the direction of the arrow. Z 308 309 310 310 310 312 313 322 325 326 327 331 334 335 Wheels and tires Useful information ............................ Important safety notes .................... Operation ........................................... Winter operation ............................... Tire pressure ..................................... Loading the vehicle .......................... Maximum load rating ....................... Uniform Tire Quality Grading Standards .......................................... Tire labeling ....................................... Definition of terms for tires and loading ............................................... Changing a wheel ............................. Wheel and tire combinations ........... 310 Operation Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). Wheels and tires Important safety notes Consult an authorized Mercedes-Benz Center if you require information on approved and recommended tires and wheels for summer and winter operation. Advice on purchasing and caring for tires is also available there. G WARNING Replace rims or tires with the same designation, manufacturer and type as shown on the original part. For further information contact an authorized Mercedes-Benz Center. If incorrectly sized rims and tires are mounted, the wheel brakes or suspension components can be damaged. Also, the operating clearance of the wheels and the tires may no longer be correct. G WARNING Worn, old tires can cause accidents. If the tire tread is worn to minimum tread depth, or if the tires have sustained damage, replace them. When replacing rims, only use genuine Mercedes-Benz wheel bolts specified for the particular rim type. Failure to do so can result in the bolts loosening and possibly an accident. Retreaded tires are not tested or recommended by Mercedes-Benz, since previous damage cannot always be recognized on retreads. The operating safety of the vehicle cannot be assured when such tires are used. G WARNING If you feel a sudden significant vibration or ride disturbance, or you suspect that possible damage to your vehicle has occurred, you should turn on the hazard warning flashers, carefully slow down, and drive with caution to an area which is a safe distance from the road. Inspect the tires and the vehicle underbody for possible damage. If the vehicle appears unsafe, have the vehicle towed to the nearest authorized Mercedes-Benz Center or tire dealer for repairs. G WARNING Do not drive with a flat tire. A flat tire affects the ability to steer or brake the vehicle. You might lose control of the vehicle. Continued driving with a flat tire or driving at high speed with a flat tire will cause excessive heat buildup and possibly a fire. i Further information about Tires and wheels can be obtained from any authorized Mercedes-Benz Center. Operation Notes on driving RIf the vehicle is heavily laden, check the tire pressures and correct them if necessary. parking your vehicle, make sure that the tires do not get deformed by the curb or other obstacles. If it is necessary to drive over curbs, speed humps or similar elevations, try to do so slowly and at an obtuse angle. Otherwise, the tires, particularly the sidewalls, can get damaged. RWhen Operation G WARNING Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. If the tire tread is worn to minimum tread depth, or if the tires have sustained damage, replace them. RRegularly check the wheels and tires of your vehicle for damage (e.g. cuts, punctures, tears, bulges on tires and deformation or cracks or severe corrosion on wheels) at least once a month, as well as after driving off-road or on rough roads. Damaged wheels can cause a loss of tire pressure. RRegularly check the tire tread depth and the condition of the tread across the whole width of the tire (Y page 311). If necessary, turn the front wheels to full lock in order to inspect the inner side of the tire surface. RAll wheels must have a valve cap to protect the valve against dirt and moisture. Do not mount anything onto the valve (such as tire pressure monitoring systems) other than the standard valve cap or other valve caps approved by Mercedes-Benz for your vehicle. RRegularly check the pressure of all the tires including the emergency spare wheel or the spare wheel, particularly prior to long trips, and correct the pressure as necessary (Y page 313). Tire tread G WARNING Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recommend that you do not allow your tires to wear down to that level. As tread depth approaches 1/8 in (3 mm), the adhesion properties on a wet road are sharply reduced. Depending upon the weather and/or road surface (conditions), the tire traction varies widely. Do not use tires that are excessively worn as the tire traction on wet road surfaces decreases significantly when the tread depth is less than 1/8 inch (3 mm). Tread wear indicators (TWI) are required by law. Six indicators are positioned on the tire tread. They become visible as soon as a tread depth of approximately 1/16 inch (1.6 mm) has been reached. If this is the case, the tire is so worn that it must be replaced. The recommended tread depth for summer tires is at least 1/8 inch (3 mm). The recommended tread depth for winter tires is at least 1/6 inch (4 mm). Bar marking : for tread wear is integrated into the tire tread. Notes on selecting, mounting and replacing tires ROnly mount tires and wheels of the same type and make. ROnly mount tires of the correct size onto the wheels. RAfter mounting new tires, run them in at moderate speeds for the first 60 miles Z Wheels and tires Notes on regularly inspecting wheels and tires 311 312 Winter operation (100 km) as they only reach their full performance after this distance. RDo not use tires that are excessively worn as the tire traction on wet road surfaces decreases significantly when the tread depth is less than 1/8 inch (3 mm). RReplace the tires after six years at the latest, regardless of wear. This also applies to the spare wheel/emergency spare wheel. The service life of tires depends on the following factors amongst other things: style Rtire pressure Rmileage Wheels and tires Rdriving MOExtended tires (tires with run-flat properties) MOExtended tires (tires with run-flat properties) allow you to continue driving your vehicle even if one or more tires are entirely deflated. MOExtended tires may be used only in conjunction with the activated tire pressure loss warning system or the activated tire pressure monitoring system and only on wheels specifically tested by Mercedes-Benz. You will find notes on driving with MOExtended tires in the "Breakdown assistance" section (Y page 297). Winter operation Please bear the following in mind At the onset of winter, have your vehicle winterproofed at a qualified specialist workshop, e.g. at an authorized MercedesBenz Center. Observe the notes in the "Changing a wheel" section (Y page 334). Driving with summer tires At temperatures below 45 ‡ (+7 †), the elasticity of summer tires and therefore also traction and braking capability are reduced considerably — equip your vehicle with M+S tires. Using summer tires at very cold temperatures could cause tears to form, thereby damaging the tires permanently. Mercedes-Benz cannot accept responsibility for this type of damage. M+S tires At temperatures below 45 ‡(+7 †), use winter tires or all-season tires. Both types of tire are identified by the M+S marking. Only winter tires bearing the i snowflake symbol in addition to the M+S marking provide the best possible grip in wintry road conditions. Only these tires will allow driving safety systems such as ABS and ESP® to function optimally in winter. These tires have been developed specifically for driving in snow. Use M+S tires of the same make and tread on all wheels to maintain safe handling characteristics. G WARNING M+S tires with a tread depth of less than 1/ inch (4 mm) must be replaced 6 immediately. They are no longer suitable for use in winter. Always observe the maximum permissible speed specified for the M+S tires you have mounted. When you have mounted M+S tires: X Check the tire pressures (Y page 317). Vehicles for Canada: restart the tire pressure loss warning system (Y page 317). X Vehicles for USA: restart the tire pressure monitor (Y page 319). X Tire pressure If you use your spare wheel when M+S tires are mounted on the other wheels, be aware that the difference in tire characteristics impairs cornering ability and reduces driving stability. Adapt your driving style accordingly. Have the spare wheel replaced by a normal wheel with an M+S tire at the nearest Mercedes-Benz Center. Snow chains For safety reasons, Mercedes-Benz recommends that you only use snow chains which have been specially approved for your vehicle by Mercedes-Benz, or are of a corresponding standard of quality. ! There is not enough space for snow chains on some wheel sizes. Observe the information under "Tires and wheels" in the "Technical Data" section to avoid damage to the vehicle or the wheels. ROnly use snow chains when driving on roads completely covered by snow. Do not exceed the maximum permissible speed of 30 mph (50 km/h). Remove the snow chains as soon as possible when you are no longer driving on snow-covered roads. RLocal regulations may restrict the use of snow chains. Applicable regulations must be observed if you wish to mount snow chains. RSnow chains must not be mounted on emergency spare wheels. If you intend to mount snow chains, please bear the following points in mind: Ryou may not attach snow chains to all wheel-tire combinations; see the information under "Wheel and tire combinations" in the "Wheels and tires" section. Rmount snow chains only in pairs and only to the rear wheels. Observe the manufacturer's installation instructions. ! If snow chains are mounted on the front wheels, the snow chains could grind against the bodywork or components of the chassis. This could result in damage to the vehicle or the tires. ! Vehicles with steel wheels: if you wish to mount snow chains on steel wheels, make sure that you remove the respective wheels' hubcaps first. The hubcaps may otherwise be damaged. i You may wish to deactivate ESP®(Y page 61) when pulling away with snow chains mounted. This way you can allow the wheels to spin in a controlled manner, achieving an increased driving force (cutting action). Tire pressure Tire pressure specifications G WARNING Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires. Overinflated tires can adversely affect handling and ride comfort, wear unevenly, increase stopping distance, and result in sudden deflation (blowout) because they are more likely to become punctured or damaged by road debris, potholes etc. Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. The recommended tire pressures for the tires mounted at the factory can be found on the labels described here. Z Wheels and tires G WARNING 313 314 Tire pressure Option 1) Tire and Loading Information placard on the B-pillar on the driver's side of the vehicle (Y page 322). The Tire and Loading Information placard contains the recommended tire pressures for cold tires on a fully loaded vehicle and for the maximum permissible vehicle speed. i The specifications given on the following Wheels and tires Tire and Loading Information placard are examples. Tire pressure specifications are vehicle-specific and may deviate from the data shown here. The tire pressures applicable to your vehicle can be found on the Tire and Loading Information placard on your vehicle. Example: tire pressure table for all tires approved ex-works for this vehicle If a tire size precedes a tire pressure, the tire pressure information following is only valid for that tire size. The load conditions "partially laden" and "fully laden" are defined in the table for different numbers of passengers and amounts of luggage. The actual number of seats may differ. : Recommended tire pressures Option 2) Tire pressure table on the inside of the fuel filler flap. The tire pressure table contains the recommended pressures for cold tires for various operating conditions, i.e. differing load and speed conditions. i Specifications shown in the examples of tire pressure tables are for illustration purposes only. Tire pressure specifications are vehicle-specific and may deviate from the data shown here. Tire pressure specifications applicable to your vehicle are located in your vehicle's tire pressure table. Example: tire pressure table with tire dimensions Some tire pressure tables show only the rim diameters instead of the full tire size, e.g. R18. The rim diameter is part of the tire size and can be found on the tire sidewall (Y page 328). Tire pressure 315 Important notes on tire pressure G WARNING Should the tire pressure drop repeatedly: Rcheck the tire for foreign bodies. Rcheck whether the wheel is losing air or the valve is leaking. sure that only a valve cap approved by Mercedes-Benz is used on the tire valve. Tire pressures that are too low have a negative effect on vehicle safety, which could lead you to cause an accident. If the tire pressures have been set to the lower values for lighter loads and/or lower road speeds, the pressures should be reset to the higher values: Option 3) The tire pressure for the emergency/collapsible spare wheel (depending on vehicle equipment) can be found: To test tire pressure, use a suitable tire pressure gauge. The outer appearance of a tire does not permit any reliable conclusion about the tire pressure. On vehicles equipped with the electronic tire pressure monitoring system, the tire pressure can be checked using the on-board computer. The tire temperature and pressure increase when the vehicle is in motion. This is dependent on the driving speed and the load. Therefore, you should only correct tire pressures when the tires are cold. The tires are cold: Rprinted Rif Rif you want to drive with an increased load and/or Rif you want to drive at higher road speeds. i The tire pressures for increased loads and/or higher road speeds, shown in the tire pressure table, may have a negative effect on driving comfort. in yellow on the rim of the emergency/collapsible spare wheel Rin the "Wheel and tire combinations" section (Y page 335) in this manual Ron the Tire and Loading Information placard on the B-pillar on the driver's side. If the tire pressure is not set correctly, this can lead to an excessive build up of heat and a sudden loss of pressure. For further information, consult a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. the vehicle has been parked without direct sunlight on the tires for at least three hours and Rif the vehicle has not been driven more than 1 mile (1.6 km). The tire temperature changes depending on the outside temperature, the vehicle speed and the tire load. If the tire temperature changes by 18 ‡ (10 † ), the tire pressure changes by approximately 10 kPa (0.1 bar/ 1.5 psi). Take this into account when checking the pressure of warm tires and only correct the tire pressure if it is too low for the current operating conditions. If you check the tire pressure when the tires are warm, the resulting value will be higher than if the tires were cold. This is normal. Do not reduce the tire pressure to the value specified for cold tires. The tire pressure would otherwise be too low. Z Wheels and tires Rmake 316 Tire pressure Observe the recommended tire pressures for cold tires Ron the Tire and Loading Information placard on the B-pillar on the driver's side, the tire pressure table on the inside of the fuel filler flap, Rprinted in yellow on the rim of the emergency/collapsible spare wheel (depending on vehicle equipment). Rin Underinflated or overinflated tires Underinflated tires Wheels and tires G WARNING Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Radversely Rincrease affect ride comfort stopping distance Maximum tire pressure G WARNING Never exceed the maximum tire inflation pressure. Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires. Overinflated tires can adversely affect handling and ride comfort, wear unevenly, increase stopping distance, and result in sudden deflation (blowout) because they are more likely to become punctured or damaged by road debris, potholes etc. Underinflated tires can: Rwear excessively and/or unevenly affect fuel economy Rfail from being overheated Radversely affect handling Radversely Overinflated tires G WARNING Follow recommended tire inflation pressures. Do not overinflate tires. Overinflated tires can adversely affect handling and ride comfort, wear unevenly, increase stopping distance, and result in sudden deflation (blowout) because they are more likely to become punctured or damaged by road debris, potholes etc. Overinflated tires can: Radversely affect handling excessively and/or unevenly Rbe more likely to become damaged Rwear : Maximum permitted tire pressure (example) i The actual values for tires are specific to each vehicle and may deviate from the values in the illustration. When adjusting the tire pressures always observe the recommended tire pressure for your vehicle (Y page 313). Tire pressure Important safety notes G WARNING Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires. Overinflated tires can adversely affect handling and ride comfort, wear unevenly, increase stopping distance, and result in sudden deflation (blowout) because they are more likely to become punctured or damaged by road debris, potholes etc. Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. Check the tire pressure at least once a month. Only check and correct tire pressures when the tires are cold (Y page 313). Checking tire pressure manually To determine and set the correct tire pressure, proceed as follows: X Remove the valve cap of the tire that is to be checked. X Press the tire pressure gauge securely onto the valve. X Read the tire pressure and compare it with the recommended value on the Tire and Loading Information placard on the B-pillar on the driver's side of your vehicle. X If necessary, increase the tire pressure to the recommended value (Y page 313). X If the tire pressure is too high, release air by pressing down the metal pin in the valve using the tip of a pen, for example. Then check the tire pressure again using the tire pressure gauge. X Screw the valve cap onto the valve. X Repeat these steps for the other tires. Tire pressure loss warning system (Canada only) Important safety notes While the vehicle is in motion, the tire pressure loss warning system monitors the set tire pressure using the rotational speed of the wheels. This enables the system to detect significant pressure loss in a tire. If the speed of rotation of a wheel changes as a result of a loss of pressure, a corresponding warning message will appear in the multifunction display. G WARNING If the Check Tire Pressure Soon message appears in the multifunction display, one or more tires are significantly underinflated. Stop the vehicle as soon as possible and inflate the tires to the pressure specified on the vehicle's Tire and Loading Information placard or (where available) in the tire pressure table. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Check all tires when cold, including the spare tire, at least once a month. The tires should be inflated to the recommended pressure. This information can be found: Ron the Tire and Loading Information placard on the B-pillar on the driver's side or Rin the table for the tire pressure on the inside of the fuel filler flap Z Wheels and tires Checking the tire pressures 317 318 Tire pressure Wheels and tires G WARNING The tire pressure loss warning system does not provide a warning for wrongly selected tire inflation pressures. Always adjust tire inflation pressure according to the Tire and Loading Information placard on the driver's door B-pillar or on the tire inflation pressure label located on the inside of the fuel filler flap. The tire pressure loss warning system does not replace regular checks of the tire inflation pressures since a gradual pressure loss in more than one tire cannot be detected by the tire pressure loss warning system. The tire pressure loss warning system is not able to issue a warning due to a sudden dramatic loss of tire inflation pressure (e.g. tire blowout caused by a foreign object). In this case bring the vehicle to a halt by carefully applying the brakes and avoiding abrupt steering maneuvers. The function of the tire pressure loss warning system is limited or delayed if: Rsnow chains are mounted to your vehicle's tires. Rroad conditions are wintry. Ryou are driving on sand or gravel. Ryou adopt a very sporty driving style (cornering at high speeds or driving with high rates of acceleration). Ryou are driving with a heavy load (in the vehicle or on the roof). Restarting the tire pressure loss warning system Restart the tire pressure loss warning system if you have: Rchanged the tire pressure Rchanged the wheels or tires Rmount new wheels or tires X Before restarting, consult the Tire and Loading Information placard on the B-pillar on the driver's side or the tire pressure table on the inside of the fuel filler flap to ensure the tire pressure in all four tires is set correctly for the current operating conditions. X Observe the notes in the section on tire pressures (Y page 313). G WARNING The tire pressure loss warning system can only give reliable warnings if you have set the correct tire pressure. If an incorrect tire pressure is set, these incorrect values will be monitored. A tire with insufficient pressure results in vehicle instability when driving, thus increasing the risk of an accident. X Make sure that the SmartKey is in position 2 (Y page 137) in the ignition lock. X Press the = or ; button to select the Service menu. X Press the 9 or : button to select Tire Pressure. X Press the a button. The Run Flat Indicator Active Press 'OK' to Restart message appears in the multifunction display. If you wish to confirm the restart: X Press the a button. The Tire Pressure Now OK? message appears in the multifunction display. X Press 9 or : to select Yes. X Press the a button. The Run Flat Indicator Restarted message appears in the multifunction display. After a teach-in period, the tire pressure loss warning system will monitor the set tire pressures of all four tires. If you wish to cancel the restart: X Press the % button. or X If the Tire Pressure Now OK? message appears, press 9 or : to select Cancel. X Press the a button. The tire pressure values stored at the last restart will continue to be monitored. Tire pressure monitor Important safety notes If a tire pressure monitor system is installed, the vehicle's wheels have sensors that monitor the tire pressures in all four tires. The tire pressure monitor warns you if the pressure drops in one or more of the tires. The tire pressure monitor only functions if the correct wheel electronics units are installed on all wheels. The tire pressure monitor has a yellow warning lamp in the instrument cluster for indicating pressure loss/malfunctions (USA) or pressure loss (Canada). Whether the warning lamp flashes or lights up indicates whether a tire pressure is too low or the tire pressure monitoring system is malfunctioning: Rif the warning lamp is lit continuously, the tire pressure on one or more tires is significantly too low. The tire pressure monitor is not malfunctioning. RUSA only: if the warning lamp flashes for 60 seconds and then remains lit constantly, the tire pressure monitor is malfunctioning. G WARNING Each tire, including the spare (if provided), should be checked at least once a month when cold and inflated to the pressure recommended by the vehicle manufacturer on the Tire and Loading Information placard on the driver's door B-pillar or the tire pressure label on the inside of the fuel filler flap. If your vehicle has tires of a different size than the size indicated on the Tire and Loading Information placard or the tire pressure label, you should determine the proper tire pressure for those tires. As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires are significantly underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. USA only: Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will be repeated every time the vehicle is started as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of incompatible replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. i USA only: Z 319 Wheels and tires Tire pressure 320 Tire pressure If the tire pressure monitor is malfunctioning, it may take more than 10 minutes for the tire pressure warning lamp to inform you of the malfunction by flashing for 60 seconds and then remaining lit. When the malfunction has been rectified, the tire pressure warning lamp goes out after driving for a few minutes. Information on tire pressures is displayed in the multifunction display. After a few minutes of driving, the current tire pressure of each tire is shown in the multifunction display. Wheels and tires i The tire pressure values indicated by the on-board computer may differ from those measured at a gas station with a pressure gauge. The tire pressures shown by the onboard computer refer to those measured at sea level. At high altitudes, the tire pressure values indicated by a pressure gauge are higher than those shown by the on-board computer. In this case, do not reduce the tire pressures. i The operation of the tire pressure monitor can be affected by interference from radio transmitting equipment (e.g. radio headphones, two-way radios) that may be being operated in or near the vehicle. i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user’s authority to operate the equipment. i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Any unauthorized modification to this device could void the user’s authority to operate the equipment. Checking tire pressure electronically X Make sure that the SmartKey is in position 2 (Y page 137) in the ignition lock. X Press the = or ; button on the steering wheel to select the Service menu. X Press the 9 or : button to select Tire Pressure. X Press the a button. The current tire pressure for each wheel will be displayed in the multifunction display. If the vehicle has been parked for longer than 20 minutes, the Tire pressures will be displayed after driving a few minutes message appears in the display. After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored. i If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes. If this occurs, note that the value displayed for the position where the spare tire is mounted is not the same as the spare wheel/emergency spare wheel's current tire pressure. Tire pressure Tire pressure monitor warning messages i If the wheel positions on the vehicle are interchanged, the tire pressures may be displayed for the wrong positions for a short time. This is rectified after a few minutes of driving, and the tire pressures are displayed for the correct positions. Restarting the tire pressure monitor G WARNING It is the driver's responsibility to set the tire pressure to the recommended cold tire pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose control over the vehicle. When you restart the tire pressure monitor, all existing warning messages are deleted and the warning lamps go out. The monitor uses the currently set tire pressures as the reference values for monitoring. In most cases, the tire pressure monitoring system recognizes the new reference values automatically. However, you can also define reference values manually as described here: X Additional tire pressure values for driving at high speeds or with heavy loads can be found in the tire pressure table on the inside of the fuel filler flap. X Make sure that the tire pressure is correct on all four wheels. X Make sure that the SmartKey is in position 2 in the ignition lock. X Press the = or ; button on the steering wheel to select the Service menu. X Press the 9 or : button to select Tire Pressure. X Press the a button. The multifunction display shows the current tire pressure of the individual tires or the Tire pressures will be displayed after driving a few minutes message. X Press the : button. The Use Current Pressures as New Reference Values message appears in the multifunction display. If you wish to confirm the restart: X Press the a button. The Tire Press. Monitor Restarted message appears in the multifunction display. After driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and monitored. If you wish to cancel the restart: X Press the % button. The tire pressure values stored at the last restart will continue to be monitored. Set the tire pressure (Y page 313) to the value recommended for the corresponding driving situation on the Tire and Loading Information placard on the driver's side B-pillar. Z Wheels and tires If the tire pressure monitor detects a significant pressure loss on one or more tires, a warning message is shown in the multifunction display. A warning tone also sounds and the tire pressure warning lamp lights up in the instrument cluster. Each tire that is affected by a significant loss of pressure is highlighted with a color. If the Correct Tire Pressure message appears in the multifunction display: X Check the tire pressure on all four wheels and correct it if necessary. 321 322 Loading the vehicle Loading the vehicle Instruction labels for tires and loads G WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. Wheels and tires Two instruction labels on your vehicle show the maximum possible load. (1) The Tire and Loading Information placard on the B-pillar on the driver's side. The Tire and Loading Information placard shows the maximum permissible number of occupants and the maximum permissible vehicle load. It also contains details of the tire sizes and corresponding pressures for tires mounted at the factory. (2) The vehicle identification plate is on the B-pillar on the driver's side. The vehicle identification plate informs you of the gross vehicle weight rating. It is made up of the vehicle weight, all vehicle occupants, the fuel and the cargo. You can also find information about the maximum gross axle weight rating on the front and rear axle. The maximum gross axle weight rating is the maximum weight that can be carried by one axle (front or rear axle). Never exceed the maximum load or the maximum gross axle weight rating for the front or rear axle. : B-pillar, driver's side Maximum permissible gross vehicle weight rating i The specifications shown on the Tire and Loading Information placard in the illustration are examples. The maximum permissible gross vehicle weight rating is vehicle-specific and may differ from that in the illustration. You can find the valid maximum permissible gross vehicle weight rating for your vehicle on the Tire and Loading Information placard. X The Tire and Loading Information placard gives you details on maximum permissible gross vehicle weight rating :: "The gross weight of occupants and luggage must never exceed XXX kilograms or XXX pounds." The gross weight of all vehicle occupants, cargo, luggage and trailer load/noseweight (if applicable) must not exceed the specified value. Loading the vehicle i The specifications shown on the Tire and Loading Information placard in the illustration are examples. The number of seats is vehicle-specific and can differ from the details shown. The number of seats in your vehicle can be found on the Tire and Loading Information placard. X Step 4: The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs and there will be five 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 - 750 (5 x 150) = 650 lbs). X Step 5: Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. X Step 6 (if applicable): If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle (Y page 325). Maximum number of seats : determines the maximum number of occupants allowed to travel in the vehicle. This information can be found on the Tire and Loading Information placard. Determining the correct load limit Step-by-step instructions The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966". X Step 1: Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle’s Tire and Loading Information placard. X Step 2: Determine the combined weight of the driver and passengers that will be riding in your vehicle. X Step 3: Subtract the combined weight of the driver and passengers from XXX kilograms or XXX lbs. Z Wheels and tires Number of seats 323 324 Loading the vehicle Example: step 1 to 3 The following table shows examples on how to calculate total and cargo load capacities with varying seating configurations and number and size of occupants. The following examples use a load limit of 1500 lbs. This is for illustration purposes only. Make sure you are using the actual load limit for your vehicle stated on the vehicle’s Tire and Loading Information placard (Y page 323). Step 1 Wheels and tires Step 2 Example 1 Example 2 Example 3 1500 lbs (680 kg) 1500 lbs (680 kg) 1500 lbs (680 kg) Example 1 Example 2 Example 3 Number of people in the vehicle (driver and occupants) 5 3 1 Distribution of the occupants Front: 2 Rear: 3 Front: 1 Rear: 2 Front: 1 Weight of the occupants Occupant 1: 150 lbs (68 kg) Occupant 2: 180 lbs (82 kg) Occupant 3: 160 lbs (73 kg) Occupant 4: 140 lbs (63 kg) Occupant 5: 120 lbs (54 kg) Occupant 1: 200 lbs (91 kg) Occupant 2: 190 lbs (86 kg) Occupant 3: 150 lbs (68 kg) Occupant 1: 150 lbs (68 kg) Gross weight of all occupants 750 lbs (340 kg) 540 lbs (245 kg) 150 lbs (68 kg) Combined maximum weight of occupants and cargo (data from the Tire and Loading Information placard) Maximum load rating Step 3 Permissible cargo and trailer load/ noseweight (maximum gross vehicle weight rating from the Tire and Loading Information placard minus the gross weight of all occupants) Example 1 Example 2 Example 3 1500 lbs (680 kg) 750 lbs (340 kg) = 750 lbs (340 kg) 1500 lbs (680 kg) 540 lbs (245 kg) = 960 lbs (435 kg) 1500 lbs (680 kg) 150 lbs (68 kg) = 1350 lbs (612 kg) 325 Vehicle identification plate Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on the vehicle identification plate on the B-pillar on the driver's side (Y page 322). Gross vehicle weight: the gross weight of the vehicle, all passengers, cargo and trailer load/noseweight (if applicable) must not exceed the permissible gross vehicle weight. Gross axle weight rating: the maximum permissible load that can be carried by one axle (front or rear axle). To ensure that your vehicle does not exceed the maximum permissible values (gross vehicle weight and maximum gross axle weight rating), have your loaded vehicle (including driver, occupants, cargo, and full trailer load if applicable) weighed on a suitable vehicle weighbridge. approximately 10% of the gross weight of the trailer and its load. Your Mercedes-Benz has been designed primarily to carry passengers and their luggage. Mercedes-Benz does not recommend towing a trailer with your vehicle. Maximum load rating G WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. Trailer load/noseweight The trailer load/noseweight affects the gross weight of the vehicle. If a trailer is attached, the trailer load/noseweight is included in the load along with occupants and luggage. The trailer load/noseweight is usually Z Wheels and tires The higher the weight of all the occupants, the smaller the maximum load for luggage. Further information can be found under "Towing a trailer" (Y page 325). 326 Uniform Tire Quality Grading Standards North America have these grades branded on the sidewall. i The actual values for tires are vehiclespecific and may deviate from the values in the illustration. Where applicable, the tire grading information can be found on the tire sidewall between the tread shoulder and maximum tire width. For example: i The actual values for tires are specific to Wheels and tires each vehicle and may deviate from the values in the illustration. Maximum tire load : is the maximum permitted weight for which the tire is approved. Further information on tire loads (Y page 327). Tread wear Traction Temperature 200 A AA All passenger car tires must conform to the statutory safety requirements in addition to these grades. Tread wear Uniform Tire Quality Grading Standards Overview of Tire Quality Grading Standards The Uniform Tire Quality Grading is a U.S. Government requirement. Their purpose is to provide drivers with consistent and reliable information regarding tire performance. Tire manufacturers are required to grade tires using three performance factors: tread wear :, tire traction ;, and temperature resistance =. Although not a Government of Canada requirement, all tires made for sale in The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified U.S. Government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm, due to variations in driving habits, service practices and differences in road characteristics and climate conditions. Traction G WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent Tire labeling G WARNING If ice has formed on the road, tire traction will be substantially reduced. Under such weather conditions, drive, steer and brake with extreme caution. The safe speed on a wet, snow covered or icy road is always lower than on dry road surfaces. You should pay special attention to road conditions when temperatures are around the freezing point. Mercedes-Benz recommends a minimum tire tread depth of 1/6 in (4 mm) for all four winter tires (Y page 312) to maintain normal driving characteristics in winter. Winter tires can reduce the braking distance on snow covered surfaces in comparison to summer tires. Stopping distance, however, is still considerably greater than when the road is not covered with ice or snow. Take appropriate care when driving. controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. Tire labeling Tire labeling overview The following markings are on the tire in addition to the tire name (sales designation) and the manufacturer's name: ! Avoid wheelspin. This can lead to damage to the drive train. Temperature G WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause excessive heat build-up and possible tire failure. The temperature grades are A (the highest), B, and C. These represent the tire's resistance to the generation of heat and its ability to dissipate heat when tested under : Uniform tire Quality Grading Standard (Y page 331) ; DOT, Tire Identification Number (Y page 330) = Maximum tire load (Y page 325) ? Maximum tire pressure (Y page 316) A Manufacturer B Tire material (Y page 331) C Tire size designation, load-bearing capacity and speed rating (Y page 328) Z Wheels and tires the tire's ability to stop on a wet surface as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. 327 328 Tire labeling D Load index (Y page 330) E Tire name i Tire data is vehicle-specific and may deviate from the data in the example. Wheels and tires Tire size designation, load-bearing capacity and speed rating : Tire width ; Nominal aspect ratio in % = Tire code ? Rim diameter A Load bearing index B Speed rating i Tire data is vehicle-specific and may deviate from the data in the example. General: depending on the manufacturer's standards, the size imprinted in the tire wall may not contain any letters or may contain one letter that precedes the size description. If there is no letter preceding the size description (as shown above): these are passenger vehicle tires according to European manufacturing standards. If "P" precedes the size description: these are passenger vehicle tires according to U.S. manufacturing standards. If "LT" precedes the size description: these are light truck tires according to U.S. manufacturing standards. If "T" precedes the size description: these are compact emergency spare wheels at high tire pressure, to be used only temporarily in an emergency. Tire width: tire width : shows the nominal tire width in millimeters. Nominal aspect ratio: aspect ratio ; is the size ratio between the tire height and the tire width and is shown in percent. The aspect ratio is calculated by dividing the tire width by the tire height. Tire code: tire code = specifies the tire type. "R" represents radial tires. "D" represents diagonal tires, "B" represents diagonal radial tires. Optionally, tires with a maximum speed of over 149 mph (240 km/h) may have "ZR" in the size description depending on the manufacturer (e.g. 245/40 ZR 18). Rim diameter: rim diameter ? is the diameter of the bead seat, not the diameter of the rim flange. The rim diameter is specified in inches (in). Load bearing index: load bearing index A is a numerical code which specifies the maximum load-bearing capacity of a tire. G WARNING The tire load rating must always be at least half of the GAWR of your vehicle. Otherwise, sudden tire failure may be the result which could cause an accident and/or serious injury to you or others. Always replace rims and tires with rims and tires having the same specifications (designation, manufacturer and type) as shown on the original part. G WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. Tire labeling G WARNING Even when permitted by law, never operate a vehicle at speeds greater than the maximum speed rating of the tires. Exceeding the maximum speed for which tires are rated can lead to sudden tire failure, causing loss of vehicle control and possibly resulting in an accident and/or serious personal injury and possible death, for you and for others. Regardless of the speed rating always observe the speed limits. Drive carefully and adapt your driving style to the traffic conditions. Summer tires Index Speed rating Q Up to 100 mph (160 km/h) R Up to 106 mph (170 km/h) S Up to 112 mph (180 km/h) T Up to 118 mph (190 km/h) H Up to 130 mph (210 km/h) V Up to 149 mph (240 km/h) W Up to 168 mph (270 km/h) Y Up to 186 mph (300 km/h) ZR...Y Up to 186 mph (300 km/h) Summer tires Index Speed rating ZR...(..Y) Above 186 mph (300 km/h) ZR Above 149 mph (240 km/h) ROptionally, tires with a maximum speed of over 149 mph (240 km/h) may have "ZR" in the size description depending on the manufacturer (e.g. 245/40 ZR 18). The service specifications consist of load bearing index A and speed rating B. RIf the size description of your tire includes "ZR" and there are no service specifications, ask the tire manufacturer in order to find out the maximum speed. If a service specification is available, the maximum speed is limited according to the speed rating in the service specification. Example: 245/40 ZR 18 97 Y. In this example, "97 Y" is the service specification. The letter "Y" represents the speed rating and the maximum speed of the tire is limited to 186 mph (300 km/h). REvery tire that has a maximum speed above 186 mph (300 km/h) must have "ZR" in the size description and the service specification must be given in brackets. Example: 275/40 ZR 18 (99 Y). The speed rating "(Y)" shows that the maximum speed of the tire is above 186 mph (300 km/h). Ask the tire manufacturer to find out the maximum speed. All-weather tires and winter tires Index Q M+S26 Up to 100 mph (160 km/h) T M+S26 Up to 118 mph (190 km/h) H M+S26 Up to 130 mph (210 km/h) V M+S26 26 Or Speed rating Up to 149 mph (240 km/h) M+Si for winter tires. Z Wheels and tires Example: The load bearing index 91 is equivalent to a maximum load of 1356 lbs (615 kg) that the tire can carry. For further information on the maximum tire load in kilograms and pounds, see (Y page 325). For further information on the load bearing index, see Load index (Y page 330). Speed rating: speed rating B specifies the approved maximum speed of the tire. 329 330 Tire labeling i Not all tires that have the M+S identification offer the driving characteristics of winter tires. Winter tires have, in addition to the M+S identification, the i snow flake symbol on the tire sidewall. Tires with this identification fulfill the requirements of the Rubber Manufacturers Association (RMA) and the Rubber Association of Canada (RAC) regarding the tire traction on snow and have been especially developed for driving on snow. An electronic speed limiter prevents your vehicle from exceeding the following speeds: Wheels and tires RAll vehicles (except AMG vehicles): 130 mph (210 km/h) RAMG vehicles: 155 mph (250 km/h) RAMG vehicles with increased top speed: 174 mph (280 km/h) The speed rating of tires mounted at the factory may be higher than the maximum speed that the electronic speed limiter permits. Make sure that your tires have the required speed rating as specified in the "Tires" section (Y page 335), e.g. if you buy new tires. Further information about reading tire data can be obtained from any qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Load index i Tire data is vehicle-specific and may deviate from the data in the example. In addition to the load bearing index, load index : may be imprinted after the letters that identify speed rating B (Y page 328) on the sidewall of the tire. RIf no specification is given: no text (as in the example above), represents a standard load (SL) tire RXL or Extra Load: represents a reinforced tire RLight load: represents a light load tire RC, D, E: represents a load range that depends on the maximum load that the tire can carry at a certain pressure DOT, Tire Identification Number (TIN) U.S. tire regulations prescribe that every manufacturer of new tires or retreader has to imprint a TIN in or on the sidewall of each tire produced. The TIN is a unique identification number. The TIN enables the tire manufacturers to inform purchasers of recalls and other safetyrelevant matters. It makes it possible for the purchaser to easily identify the affected tires. The TIN is made up of manufacturer identification code ;, tire size =, tire type code ? and manufacturing date A. i Tire data is vehicle-specific and may deviate from the data in the example. Definition of terms for tires and loading Tire characteristics Definition of terms for tires and loading Tire ply composition and material used Describes the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall. These are made of steel, nylon, polyester and other materials. Bar Metric unit for tire pressure. There are 14.5038 pounds per square inch (psi) to 1 bar; there are 100 kilopascals (kPa) to 1 bar. DOT (Department of Transportation) DOT marked tires fulfill the requirements of the United States Department of Transportation. Normal occupant weight The number of occupants the vehicle is designed to seat, multiplied by 68 kilograms (150 lbs). Uniform Tire Quality Grading Standards i Tire data is vehicle-specific and may A uniform standard to grade the quality of tires with regards to tread quality, tire traction and temperature characteristics. Ratings are determined by tire manufacturers using U.S. government testing procedures. The ratings are molded into the sidewall of the tire. deviate from the data in the example. This information describes the tire cord and the number of layers in sidewall : and under the tread ;. Recommended tire pressure The recommended tire pressure applies to the tires mounted at the factory. The Tire and Loading Information placard contains the recommended tire pressures for Z Wheels and tires DOT (Department of Transportation): tire symbol : indicates that the tire complies with the requirements of the U.S. Department of Transportation. Manufacturer identification code: manufacturer identification code ; provides details on the tire manufacturer. New tires have a code with two symbols. Retreaded tires have a code with four symbols. Further information about retreaded tires (Y page 310). Tire size: identifier = describes the tire size. Tire type code: tire type code ? can be used by the manufacturer as a code to describe specific characteristics of the tire. Date of manufacture: date of manufacture A provides information about the age of a tire. The first and second positions represent the week of manufacture, starting with "01" for the first calendar week. Positions three and four represent the year of manufacture. For example, a tire that is marked with "3208", was manufactured in week 32 in 2008. 331 332 Definition of terms for tires and loading cold tires on a fully loaded vehicle and for the maximum permissible vehicle speed. The tire pressure table contains the recommended tire pressures for cold tires under various operating conditions, i.e. differing load and speed conditions. Increased vehicle weight due to optional equipment This is the combined weight of all standard and optional equipment available for the vehicle, regardless of whether it is actually installed on the vehicle or not. vehicle identification plate on the B pillar on the driver's side. GVWR (Gross Vehicle Weight Rating) The GVWR is the maximum permissible gross weight of a fully loaded vehicle (the weight of the vehicle including all accessories, occupants, fuel, luggage and the drawbar noseweight, if applicable). The gross vehicle weight rating is specified on the vehicle identification plate on the B-pillar on the driver's side. Maximum loaded vehicle weight Wheels and tires Rim This is the part of the wheel on which the tire is mounted. The maximum weight is the sum of the curb weight of the vehicle, the weight of the accessories, the total load limit and the weight of the optional equipment installed at the factory. GAWR (Gross Axle Weight Rating) The GAWR is the maximum permissible axle weight. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identification plate on the B-pillar on the driver's side. Speed rating The speed rating is part of the tire identification. It specifies the speed range for which the tire is approved. GVW (Gross Vehicle Weight) The gross vehicle weight comprises the weight of the vehicle including fuel, tools, the spare wheel, accessories installed, occupants, luggage and the drawbar noseweight, if applicable. The gross vehicle weight must not exceed the gross vehicle weight rating GVWR as specified on the Kilopascal (kPa) Metric unit for tire pressure. 6.9 kPa is the equivalent of 1 psi. Another unit for tire pressure is bar. There are 100 kilopascals (kPa) to 1 bar. Load index In addition to the load bearing index, the load index may also be imprinted on the sidewall of the tire. This specifies the load bearing capacity more precisely. Curb weight The weight of a vehicle with standard equipment including the maximum capacity of fuel, oil and coolant. It also includes the airconditioning system and optional equipment if these are installed in the vehicle, but does not include passengers or luggage. Definition of terms for tires and loading The maximum load rating in kilograms or pounds is the maximum weight for which a tire is approved. Maximum permissible tire pressure Maximum permissible tire pressure for one tire. Maximum load on one tire Maximum load on one tire. This is calculated by dividing the maximum axle load of one axle by two. PSI (pounds per square inch) A standard unit of measure for tire pressure. Aspect ratio Relationship between tire height and tire width in percent. Tread The part of the tire that comes into contact with the road. Bead The tire bead ensures that the tire sits securely on the wheel. There are several steel wires in the bead to prevent the tire from coming loose from the wheel rim. Sidewall The part of the tire between the tread and the bead. Weight of optional extras The combined weight of those optional extras that weigh more than the replaced standard part and more than 2.3 kilograms (5 lbs). These optional extras, such as highperformance brakes, level control, a roof rack or a high-performance battery, are not included in the curb weight and accessory weight. Tire pressure This is pressure inside the tire applying an outward force to each square inch of the tire's surface. The tire pressure is specified in pounds per square inch (psi), in kilopascal (kPa) or in bar. The tire pressure should only be corrected when the tires are cold. TIN (Tire Identification Number) This is a unique identifier which can be used by a tire manufacturer to identify tires, for example for a product recall, and thus identify the purchasers. The TIN is made up of the manufacturer's identity code, tire size, tire type code and the manufacturing date. Tire pressure of cold tires The tires are cold: Rif the vehicle has been parked without direct sunlight on the tires for at least three hours and Rif the vehicle has not been driven more than 1 mile (1.6 km). Load bearing index The load bearing index (also load index) is a code that contains the maximum load bearing capacity of a tire. Z Wheels and tires Maximum load rating 333 334 Changing a wheel Traction Traction is the result of friction between the tires and the road surface. Treadwear indicators Narrow bars (tread wear bars) that are distributed over the tire tread. If the tire tread is level with the bars, the wear limit of 1/16 in (1.6 mm) has been reached. Occupant distribution Wheels and tires The distribution of occupants in a vehicle at their designated seating positions. Total load limit Rated cargo and luggage load plus 68 kilograms (150 lbs) times the vehicle's designated seating capacity. Changing a wheel Flat tire The "Breakdown assistance" section (Y page 293) contains information and notes on how to deal with a flat tire. It also provides instructions on changing a wheel or mounting the spare wheel/emergency spare wheel. Interchanging the wheels G WARNING Rotate front and rear wheels only if the tires are of the same dimension. If your vehicle is equipped with mixed-size tires (different tire dimensions front vs. rear), tire rotation is not possible. G WARNING Have the tightening torque checked after changing a wheel. Wheels could become loose if not tightened with a torque of 96 lb-ft (130 Nm). Only use genuine Mercedes-Benz wheel bolts specified for your vehicle's rims. The wear patterns on the front and rear tires differ, depending on the operating conditions. Rotate the wheels before a clear wear pattern has formed on the tires. Front tires typically wear more on the shoulders and the rear tires in the center. If your vehicle's tire configuration allows, you can rotate the wheels according to the intervals in the tire manufacturer's warranty book in your vehicle documents. If this is not available, the tires should then be replaced every 3000 to 6000 miles (5000 to 10,000 km), or earlier if the tire wear requires this. Do not change the direction of wheel rotation. Clean the contact surfaces of the wheel and the brake disc thoroughly every time a wheel is interchanged. Check the tire pressures. Information on changing a wheel and mounting the spare wheel (Y page 293). ! On vehicles equipped with a tire pressure monitor, electronic components are located in the wheel. Tire-mounting tools should not be used near the valve. This could damage the electronic components. Always have the tires changed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Direction of rotation Tires with a specified direction of rotation have additional benefits, e.g. if there is a risk of hydroplaning. You will only gain these benefits if the correct direction of rotation is maintained. An arrow on the sidewall of the tire indicates its correct direction of rotation. Wheel and tire combinations Storing wheels Store wheels that are not being used in a cool, dry and preferably dark place. Protect the tires from oil, grease, gasoline and diesel. Cleaning the wheels G WARNING Do not use power washers with circular-jet nozzles (dirt grinders) to clean your vehicle, in particular the tires. You could otherwise damage the tires and cause an accident. Wheel and tire combinations Please bear the following in mind ! For safety reasons, Mercedes-Benz recommends that you only use Tires and wheels which have been approved by Mercedes-Benz specifically for your vehicle. These tires have been specially adapted for use with the control systems, such as ABS or ESP®, and are marked as follows: RMO = Mercedes-Benz Original RMOE = Mercedes-Benz Original Extended (tires featuring run-flat characteristics) RMO1 = Mercedes-Benz Original (only certain AMG tires) Mercedes-Benz Original Extended tires may only be used on wheels that have been specifically approved by Mercedes-Benz. Only use tires, wheels or accessories tested and approved by Mercedes-Benz. Certain characteristics, e.g. handling, vehicle noise emissions or fuel consumption, may otherwise be adversely affected. In addition, when driving with a load, tire dimension variations could cause the tires to come into contact with the bodywork and axle components. This could result in damage to the tires or the vehicle. Mercedes-Benz accepts no liability for damage resulting from the use of tires, wheels or accessories other than those tested and approved. Further information about tires, wheels and approved combinations can be obtained from any authorized Mercedes-Benz Center. i The recommended tire pressures for various operating conditions can be found: Ron the Tire and Loading Information placard with the recommended tire pressures on the B-pillar on the driver's side Rin the tire pressure table on the inside of the fuel filler flap. Observe the instructions about the recommended tire pressure and the various operating conditions (Y page 313). Check tire pressures regularly, and only when the tires are cold. Comply with the maintenance recommendations of the tire manufacturer in the vehicle document wallet. i Notes on the vehicle equipment – always equip the vehicle: Rwith tires of the same size on a given axle (left/right) Rwith the same type of tires at a given time (summer tires, winter tires, MOExtended tires) i On the following pages, you can find information on approved wheel rims and tire sizes for equipping your vehicle with winter tires. Winter tires are not available ex factory as standard equipment or optional extras. If you wish to mount approved winter tires on your vehicle, you may, in certain Z Wheels and tires You may mount a spare wheel/emergency spare wheel against the direction of rotation. Observe the time restriction on use as well as the speed limit specified on the spare wheel/ emergency spare wheel. 335 336 Wheel and tire combinations circumstances, require wheel rims of the appropriate size. The sizes of the approved winter tires may differ from those of the original tires. This is dependent on the model and the equipment installed at the factory. The tires and wheel rims, as well as further information, can be obtained at a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center. i Overview of abbreviations used in the following tire tables: RBA: both axles front axle RRA: rear axle Wheels and tires RFA: In the following table, the wheel/tire combinations are allocated to the vehicle models through variants, e.g. V1, V2 etc.: V1 C 250, C 250 4MATIC V2 C 300 4MATIC V3 C 350, C 350 4MATIC V4 C 63 AMG i Not all wheel and tire combinations are available ex factory for all countries. Wheel and tire combinations 337 Summer tires Alloy wheels V1 V2 V3 V4 BA 225/45 R17 91 W MOExtended27, 28 7.5 J x 17 H2 Wheel offset: 1.85 in (47 mm) # # # — FA 225/45 R17 91 W MOExtended27 245/40 R17 91 W MOExtended27, 29 7.5 J x 17 H2 Wheel offset: 1.85 in (47 mm) 8.5 J x 17 H2 Wheel offset: 2.28 in (58 mm) # # # — FA 225/40 R18 92 Y XL # # # — RA 255/35 R18 94 Y XL29 7.5 J x 18 H2 Wheel offset: 1.85 in (47 mm) 8.5 J x 18 H2 Wheel offset: 2.13 in (54 mm) FA 225/40 R18 92 Y XL # # # — RA 255/35 R18 94 Y XL29 8.0 J x 18 H2 Wheel offset: 1.97 in (50 mm) 8.5 J x 18 H2 Wheel offset: 2.13 in (54 mm) FA 225/40 ZR18 92 Y XL # # # — RA 255/35 ZR18 94 Y XL29 8.0 J x 18 H2 Wheel offset: 1.97 in (50 mm) 8.5 J x 18 H2 Wheel offset: 2.13 in (54 mm) FA 235/40 ZR18 95 Y XL — — — # RA 255/35 ZR18 94 Y XL29 8.0 J x 18 H2 Wheel offset: 1.77 in (45 mm) 9.0 J x 18 H2 Wheel offset: 2.13 in (54 mm) FA 235/35 ZR19 XL — — — # RA 255/30 ZR19 XL29 8.0 J x 19 H2 Wheel offset: 1.77 in (45 mm) 9.0 J x 19 H2 Wheel offset: 2.13 in (54 mm) RA 27 MOExtended tires (tires with run-flat characteristics) only in combination with an activated tire pressure loss warning system or tire pressure monitor. 28 Not in combination with sports suspension code 486, dynamic handling package code 483 or Sports package code 950/952. of snow chains is not permitted. Observe the notes in the "Snow chains" section. 29 Use Z Wheels and tires Tires 338 Wheel and tire combinations Wheels and tires All-weather tires Alloy wheels V1 V2 V3 V4 BA 205/55 R16 91 H M+S30 7 J x 16 H2 Wheel offset: 1.69 in (43 mm) # — — — BA 225/45 R17 91 H M+S28 7.5 J x 17 H2 Wheel offset: 1.85 in (47 mm) # # — — FA 225/45 R17 91 H M+S # # # — RA 245/40 R17 91 H M+S29 7.5 J x 17 H2 Wheel offset: 1.85 in (47 mm) 8.5 J x 17 H2 Wheel offset: 2.28 in (58 mm) Winter tires Alloy wheels V1 V2 V3 V4 BA 205/55 R1 6 91 H M+Si30 7 J x 16 H2 Wheel offset: 1.69 in (43 mm) # — — — BA 225/45 R17 91 H M+Si 7.5 J x 17 H2 Wheel offset: 1.85 in (47 mm) # # # — BA 225/45 R17 91 H M+SiMOExtended27 7.5 J x 17 H2 Wheel offset: 1.85 in (47 mm) # # # — BA 225/40 R18 92 V XL M+Si 8.0 J x 18 H2 Wheel offset: 1.77 in (45 mm) — — — # BA 235/40 R18 95 V XL M+Si29 8.0 J x 18 H2 Wheel offset: 1.77 in (45 mm) — — — # FA 235/40 R18 95 V XL M+Si 255/35 R18 94 V XL M+Si29 8.0 J x 18 H2 Wheel offset: 1.77 in (45 mm) 9.0 J x 18 H2 Wheel offset: 2.13 in (54 mm) — — — # RA 30 Not in combination with Sports package code 950/952. 28 Not in combination with sports suspension code 486, dynamic handling package code 483 or Sports package code 950/952. of snow chains is not permitted. Observe the notes in the "Snow chains" section. 27 MOExtended tires (tires with run-flat characteristics) only in combination with an activated tire pressure loss warning system or tire pressure monitor. 29 Use Wheel and tire combinations 339 "Minispare" emergency spare wheel29 Tires Wheels V1 V2 V3 V4 T 125/90 R16 98 M Tire pressure: 420 kPa (4.2 bar/ 61 psi) 3.5 B x 16 H2 Wheel offset: 0.79 in (20 mm) # # — — T 125/80 R17 99 M Tire pressure: 420 kPa (4.2 bar/ 61 psi) 3.5 B x 17 H2 Wheel offset: 0.79 in (20 mm) — — # — T 125/70 R18 99 M Tire pressure: 420 kPa (4.2 bar/ 61 psi) 3.5 B x 18 H2 Wheel offset: 0.79 in (20 mm) — — — # Wheels and tires i The specified tire pressure is printed in yellow on the emergency/collapsible spare wheel. 29 Use of snow chains is not permitted. Observe the notes in the "Snow chains" section. Z 340 341 342 342 342 343 343 344 351 Technical data Useful information ............................ Notes on technical data ................... Genuine Mercedes-Benz parts ......... Warranty ............................................ Identification plates ......................... Service products and capacities ..... Vehicle data ...................................... 342 Genuine Mercedes-Benz parts Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safetyrelated systems and functions. i Please read the information on qualified specialist workshops (Y page 24). G WARNING Driving safety may be impaired if nonapproved parts, tires and wheels or safetyrelevant accessories are used. This could lead to malfunctions in safetyrelevant systems, e.g. the brake system. This could cause you to lose control of your vehicle and cause an accident. For this reason, Mercedes-Benz recommends that you use genuine Mercedes-Benz parts or parts of equal quality. Only use tires, wheels and accessories that have been specifically approved for your vehicle. ! Air bags and Emergency Tensioning Notes on technical data i The data stated here specifically refers to Technical data a vehicle with standard equipment. Consult an authorized Mercedes-Benz Center for the data for all vehicle variants and trim levels. Genuine Mercedes-Benz parts All Mercedes-Benz Centers maintain a supply of genuine Mercedes-Benz parts for necessary service and repair work. In addition, strategically located parts delivery centers provide for quick and reliable parts service. There are more than 300,000 different genuine Mercedes-Benz parts available for Mercedes-Benz models. Genuine Mercedes-Benz parts are subject to strict quality control. Each part has been specially developed, manufactured or selected for Mercedes-Benz vehicles and fine-tuned for them. Therefore, only genuine Mercedes-Benz parts should be used. Devices, as well as control units and sensors for these restraint systems may be installed in the following areas of your vehicle: Rdoors Rdoor pillars sills Rseats Rdashboard Rinstrument cluster Rcenter console Do not install accessories such as audio systems in these areas. Do not carry out repairs or welding. You could impair the operating efficiency of the restraint systems. Have aftermarket accessories installed at a qualified specialist workshop. MercedesBenz recommends that you use an authorized Mercedes-Benz Center for this purpose. Rdoor H Environmental note Daimler AG also supplies reconditioned major assemblies and parts which are of the same quality as new parts. They are covered by the same Limited Warranty entitlements as new parts. Always specify the vehicle identification number (VIN) (Y page 343) and the engine Identification plates number (Y page 344) when ordering genuine Mercedes-Benz parts. Warranty 343 Identification plates Vehicle identification plate with vehicle identification number (VIN) and paint code number The Service and Warranty Information booklet contains detailed information about the warranties covering your vehicle. Your authorized Mercedes-Benz Center will exchange or repair any defective parts originally installed in the vehicle in accordance with the terms of the following warranties: RNew i Should you lose your Service and Warranty Information booklet, have an authorized Mercedes-Benz Center arrange for a replacement. It will be mailed to you. X Open the driver's door. You will see vehicle identification plate :. Example: vehicle identification plate (USA only) ; VIN = Paint code Example: vehicle identification plate (Canada only) ; VIN = Paint code Z Technical data Vehicle Limited Warranty System Warranty REmission Performance Warranty RCalifornia, Connecticut, Maine, Massachusetts, New York, Pennsylvania, Rhode Island and Vermont Emission Control Systems Warranty RState Warranty Enforcement Laws (Lemon Laws) Replacement parts and accessories are covered by the Mercedes-Benz Parts and Accessories warranties. You can obtain information about this from any authorized Mercedes-Benz Center. REmission Service products and capacities 344 i The data shown on the identification plate is example data. This data is different for every vehicle and can deviate from the data shown here. You can find the data applicable to your vehicle on the vehicle's identification plate. Engine number Vehicle identification number (VIN) The vehicle identification number (VIN) can be found in the following locations: the vehicle identification plate (Y page 343) Ron the lower edge of the windshield (Y page 344) In addition to being stamped on the vehicle identification plate, the vehicle identification number (VIN) is also stamped onto the vehicle body. It is located on the floor in front of the righthand front seat. Technical data Ron : Emission control information plate, including the certification of both federal and Californian emissions standards ; Engine number (stamped into the crankcase) = VIN (on the lower edge of the windshield) Service products and capacities Important safety notes Service products include the following: Rfuels (e.g. gasoline, diesel) Rlubricants (e.g. engine oil, transmission oil) Rcoolant Rbrake fluid Rwindshield X Slide the right-hand front seat to its rearmost position. X Fold floor covering : upwards. You will see vehicle identification number (VIN) ;. washer fluid Vehicle components and their respective lubricants must match. You should therefore only use products that have been tested and approved by Mercedes-Benz. Information on tested and approved products can be obtained at a Mercedes-Benz Center or on the Internet at http:// www.mbusa.com (USA only). G WARNING Comply with all valid regulations with respect to handling, storing and disposing of service fluids. Otherwise, you could endanger persons or the environment. Keep service fluids out of the reach of children. Service products and capacities 345 Technical data For health reasons, you should prevent service fluids from coming into direct contact with your skin or clothing. If a service fluid is swallowed, contact a physician immediately. Z 346 Service products and capacities Capacities Missing values were not available at time of going to print. Engine oil and filter Model Capacity Fuel, coolant, lubricants, etc. C 250 5.8 US qt (5.5 l) C 250 4MATIC31 C 300 4MATIC 7.4 US qt (7.0 l) Approved engine oils C 350 C 350 4MATIC31 Cooling system C 63 AMG32 9.0 US qt (8.5 l) C 250 Approximately 7.6 US qt (7.2 l) C 250 4MATIC31 C 300 4MATIC Approximately 8.9 US qt (8.4 l) MB 325.0 or MB 326.0 antifreeze/ corrosion inhibitor Technical data C 350 C 350 4MATIC31 Tank capacity Reserve Windshield/ headlamp cleaning system 31 Canada C 63 AMG Approximately 12.4 US qt (11.7 l) C 250 15.6 US gal (59.0 l) All models except C 250 17.4 US gal (66.0 l) All models except AMG vehicles Approximately 2.1 US gal (8.0 l) C 63 AMG Approximately 3.7 US gal (14.0 l) C 250 C 350 C 350 4MATIC31 C 63 AMG 3.7 US qt (3.5 l) C 250 4MATIC31 C 300 4MATIC 6.3 US qt (6.0 l) only. external oil cooler. 33 Mixed with water or premixed washer fluid with antifreeze protection. 32 Including Premium-grade unleaded gasoline (at least 91 octane, average value between 96 RON/ 86 MON) MB windshield washer concentrate33 (Y page 351) Mixing ratio for washer fluid (Y page 351) Service products and capacities Important safety notes G WARNING Gasoline is highly flammable and poisonous. It burns violently and can cause serious personal injury. Never allow sparks, flames or smoking materials near gasoline. Turn off the engine before refueling. Whenever you are around gasoline, avoid inhaling fumes and any skin or clothing contact. Direct skin contact with fuels and the inhalation of fuel vapors are damaging to your health. Premium-grade unleaded gasoline ! To ensure the longevity and full performance of the engine, only premiumgrade unleaded gasoline may be used. If there is no premium-grade unleaded gasoline available and regular-grade unleaded gasoline may be used; please observe the following precautions: Ronly fill the fuel tank to half full with regular-grade unleaded gasoline and fill the rest with premium-grade unleaded gasoline as soon as possible. Rdo not drive at the maximum speed. Ravoid sudden acceleration. Rif the vehicle is carrying a light load, e.g. two passengers without luggage, do not allow the engine to rev above 3,000 rpm. Rif the vehicle is fully loaded or is being operated in mountainous terrain, do not depress the accelerator pedal further than Ô of the pedal travel. Flexible fuel vehicles Important safety notes Flexible fuel vehicles can be recognized by the sticker on the inside of the filler flap. Flexible fuel vehicles can be operated with premium-grade unleaded gasoline and ethanol (E85) or a mixture of both. Ethanol fuel (E85) is a mixture of approximately 85% ethanol and 15% unleaded gasoline. G WARNING Ethanol fuel (E85) and its vapors are highly flammable, poisonous and highly combustible. Ethanol fuel causes serious injury if it ignites, if it comes into contact with your skin or if you inhale the vapors. Avoid inhaling ethanol vapors and ethanol coming into contact with your skin. Before refueling, extinguish all naked flames. Never allow sparks or smoking materials near ethanol. Changing the fuel type For best performance and drivability, it is recommended that you use either one or the other fuel. Avoid alternating regularly between the two different types of fuel. When changing between the fuel types, ensure that the following conditions are met: Rthe fuel level is below half full. Rthe fuel level is above the reserve level. This is identifiable by the fuel tank reserve warning lamp not being lit. Ryou add more than 5 gallons (20 liters) of fuel. Ryou switch off the engine before refueling. Rthe engine is started and runs for at least five minutes immediately after refueling. These precautions should prevent the possibility of engine difficulties arising from changing to a different fuel type. If the engine still doesn't run correctly, refuel with at least 3 US gal (12 l) of premium-grade unleaded gasoline. This may improve the running of the engine. Z Technical data Fuel 347 348 Service products and capacities Fuel consumption Ethanol (E85) contains less energy per gallon than gasoline. To ensure that the engine performance with ethanol (E85) is similar to that when using gasoline, the engine must burn more ethanol. As a result, it is to be expected that fuel consumption will increase when using ethanol fuel (E85), compared to gasoline. Technical data Maintenance Inform your authorized Mercedes-Benz Center that you are operating or have operated the vehicle with ethanol (E85). Low outside temperatures Starting times may significantly increase at temperatures below 32 ‡ (0 † ). At low outside temperatures, Mercedes-Benz recommends the use of an auxiliary heater. For further information, consult an authorized Mercedes-Benz Center. Rough idling may also be experienced at low outside temperatures until the engine is fully warmed up. Ethanol (E85) is unsuitable for use if outside temperatures fall below 14 ‡ (-10 † ). High outside temperatures At outside temperatures above 95 ‡ (35 † ), the time required for the starting procedure may increase and be accompanied by rough idling following the start. Fuel requirements Use only premium-grade unleaded gasoline. The octane number should be at least 91. Details can be found on the gas pump. The octane number is the average value of the Research Octane Number (RON) and the Motor Octane Number (MON): (RON + MON) / 2, also known as knock resistance. Reformulated gasoline (RFG) and/or unleaded gasoline with additives can be used. However, the concentration of additives in the fuel must be less than 10%, e.g. REthanol RTAME RETBE RIPA RTBA For MTBE, the concentration should not exceed 15%. The concentration of methanol in gasoline including other additives must not exceed 3%. Using mixtures of methanol and ethanol is not permitted. Gasohol, a mixture of 10% ethanol and 90% unleaded gasoline, can be used. All of these mix fuels must fulfill the fuel requirements, e.g.: Rknock resistance point Rvapor pressure Rboiling Additives in gasoline One of the main problems of poor fuel quality is the forming of deposits that are created during the gasoline combustion process. Mercedes-Benz recommends that you use fuel brands that have the additives. Deposits may form if you use fuels without additives over a longer period of time. These deposits are most likely to form on the inlet valves and in the combustion chamber. This could lead to engine problems, e.g.: Rlonger engine warm-up phase idle Rengine noise Rmisfiring Rloss of power Carbon deposits may form if the availability of gasoline with relevant additives is insufficient (in certain regions). In this case, Mercedes-Benz recommends the use of Runeven Service products and capacities ! Do not refuel with low-grade fuel and do not use fuel additives that are not tested and approved for Mercedes-Benz vehicles. Damage to or malfunctions of the fuel system may otherwise occur. Engine oil Please bear the following in mind The engine oils are matched to the performance of Mercedes-Benz engines and service intervals. You should therefore only use engine oils and oil filters that are approved for vehicles with maintenance systems. For a list of approved engine oils and oil filters, consult an authorized Mercedes-Benz Center. Or visit http://www.mbusa.com (USA only). ! Never use engine oil or an oil filter of a specification other than is necessary to fulfill the prescribed service intervals. Do not change the engine oil or oil filter in order to achieve longer replacement intervals than those prescribed. You could otherwise cause engine damage or damage to the exhaust gas aftertreatment. Follow the instructions in the service interval display regarding the oil change. Otherwise, you may damage the engine and the exhaust gas aftertreatment. 34 Canada The table shows which engine oils have been approved for your vehicle. Missing values were not available at time of going to print. Model Engine model MB Approval C 250 271 229.3, 229.5, 229.51 C 250 4MATIC34 C 300 4MATIC 272 229.5 C 350 C 350 4MATIC34 276 C 63 AMG 156 229.535 i MB approval is indicated on the oil containers. Additives ! Do not use any additives in the engine oil. This could damage the engine. Engine oil viscosity Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin. Select an engine oil with an SAE (viscosity) classification suitable for the prevailing outside temperatures. The following table shows the correct SAE classification to be used. The low-temperature characteristics of engine oils can deteriorate significantly, e.g. as a result of aging, soot and fuel deposits. It is therefore strongly recommended that you carry out regular oil changes using an approved engine oil with the appropriate SAE classification. only. only SAE 0W-40 or SAE 5W-40 engine oils may be used. 35 Restriction: Z Technical data additives that have been approved for Mercedes-Benz vehicles. Consult an authorized Mercedes-Benz Center or go to the Internet site http://www.mbusa.com (USA only) for a list of approved products. Comply with the instructions for use on the product label. Do not mix other fuel additives with fuel. This causes unnecessary costs and could damage the engine. 349 350 Service products and capacities Coolant Important safety notes The coolant is a mixture of water and antifreeze/corrosion inhibitor. It performs the following tasks: Rcorrosion protection protection Rraising the boiling point The engine cooling system is filled at the factory with coolant that contains an antifreeze/corrosion inhibitor that ensures protection down to approximately -35 ‡ (-37 †). Rantifreeze Refrigerant of the air-conditioning system The air-conditioning system is filled with R134a refrigerant and a special PAG lubricant. ! Never use refrigerant R 12 (CFC) or Technical data mineral lubricants. Otherwise, you could damage the air-conditioning system. Brake fluid G WARNING Over a period of time, the brake fluid absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving downhill). This would impair braking efficiency. You should have the brake fluid renewed at regular intervals. The brake fluid change intervals can be found in the Service Booklet. Only use brake fluid approved by MercedesBenz. Information about approved brake fluids can be obtained from any authorized Mercedes-Benz Center or on the Internet at http://bevo.mercedes-benz.com. ! Only add coolant that has been premixed with the desired antifreeze protection. Otherwise, the engine could be damaged. Further information on coolants and on filling can be found in the Mercedes-Benz Specifications for Service Products, MB Approval 310.1, e.g. on the Internet at http://bevo.mercedes-benz.com. You can also consult an authorized Mercedes-Benz Center. ! Always use a suitable coolant mixture, even in countries where high temperatures prevail. Otherwise, the engine cooling system is not sufficiently protected from corrosion and overheating. If the coolant has antifreeze protection down to -35 ‡ (-37 †), the boiling point of the coolant under operating conditions is approximately 266 ‡ (130 †). Your vehicle has a range of aluminum components. Aluminum components in the engine make it necessary to use antifreeze/ corrosion inhibitor coolant that has been specifically formulated to protect the aluminum parts. Using other antifreeze/ corrosion inhibitors without these characteristics affects the service life. The coolant must be used throughout the year in order to maintain the necessary corrosion Vehicle data Rbe at least 50%. This will protect the engine cooling system against freezing down to approximately -35 ‡ (-37 † ). Rnot exceed 55% (antifreeze protection to -49 ‡ [-45 † ]); otherwise, heat will not dissipate as effectively. If the coolant level is too low, MB 325.0 or 326.0 anticorrosion/antifreeze should be added. Have the engine cooling system checked for possible leaks. Use MB SummerFit windshield washer concentrate at temperatures above freezing: X Mix 1 part MB SummerFit with 100 parts water. Use MB WinterFit windshield washer concentrate at temperatures below freezing: X At temperatures down to 14 ‡ (Ò 10 †): mix 1 part MB WinterFit with 2 parts water. X At temperatures down to Ò 4 ‡ (Ò 20 †): mix 1 part MB WinterFit with 1 part water. X At temperatures down to Ò 20.2 ‡ (Ò 29 †): mix 2 parts MB WinterFit with 1 part water. ! Only SummerFit and WinterFit can be mixed. Otherwise, the jets could become blocked. Vehicle data Please note that for the specified vehicle data: Rthe heights specified may vary as a result of: - tires - load - condition of the suspension - optional equipment Missing values were not available at time of going to print. All models Windshield/headlamp cleaning system G WARNING Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. Vehicle length 182.3 in (4630 mm) Vehicle width including exterior mirrors 79.1 in (2008 mm) Vehicle height 56.9 in (1444 mm) Wheelbase 108.7 in (2760 mm) Front track 60.7 in (1541 mm) Rear track 60.8 in (1544 mm) Z Technical data protection and to provide protection from overheating. In the Service Booklet, you can find information on the intervals for renewal. The renewal interval is determined by the coolant type and the engine cooling system design. The renewal interval in the Service Booklet is only valid if the coolant is renewed or filled up with Mercedes-Benz approved products. Therefore, only use MB 325.0 or 326.0 anticorrosion/antifreeze or another Mercedes-Benz approved product of the same specification. Information on other products with the same specifications that are approved by Mercedes-Benz can be obtained at an authorized Mercedes-Benz Center or on the Internet at http://bevo.mercedes-benz.com. The coolant is checked at every maintenance interval at an authorized Mercedes-Benz Center. The antifreeze/corrosion inhibitor concentration in the engine cooling system should: 351 352 Vehicle data All models Turning circle 35.57 ft (10.84 m) Maximum roof load Maximum trunk load Maximum 220lb (100kg) Technical data C 63 AMG Vehicle length 185.5 in (4712 mm) Vehicle width including exterior mirrors 79.1 in (2008 mm) Vehicle height 56.4 in (1433 mm) Wheelbase 108.9 in (2765 mm) Front track 61.8 in (1569 mm) Rear track 60.0 in (1525 mm) Turning circle 36.42 ft (11.10 m) Publication details Internet Further information about Mercedes-Benz vehicles and about Daimler AG can be found on the following websites: http://www.mbusa.com (USA only) http://www.mercedes-benz.ca (Canada only) Editorial office Not to be reprinted, translated or otherwise reproduced, in whole or in part, without the written permission of Daimler AG. As at 15.03.2011 É2045843582ÇËÍ 2045843582 Order no. 6515 0749 13 Part no. 204 584 35 82 Edition A 2012