99-5813
I N S TA L L AT I O N I N S T R U C T I O N S
Lincoln Navigator 2007-2014 / MKX 2007-2010
Lincoln MKZ 2007-2009 / Zephyr 2006
(excludes models equipped with factory navigation)
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
KIT COMPONENTS
• A) Radio housing • B) ISO brackets • C) Trim plate • D) Radio housing brackets (MKZ and Zephyr) • E) (4) #8 3/8” Phillips screws
A
B
C
D
E
TABLE OF CONTENTS
Dash Disassembly
–Navigator 2007-2014............................................2
–MKX 2007-2010......................................................3
–MKZ 2007-2009 / Zephyr 2006............................4
Kit Assembly
–DIN radio provision with pocket.........................5
–ISO DIN radio provision with pocket...................6
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: 40-CR10
Steering Wheel Control Interface: ASWC-1
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench • 9/32” socket wrench
CAUTION! All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.®
MetraOnline.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 8/25/17 INST99-5813
DASH DISASSEMBLY
Navigator 2007-2014
1. Unclip and remove the panel
surrounding the shifter. (Figure A)
2. Remove (2) 9/32” screws from the
bottom of the radio/climate control trim
panel. (Figure B)
3. Unclip and remove the entire panel
surrounding the radio and including the
climate controls. (Figure B)
4. Remove (4) 9/32” screws securing the
radio. Unplug and remove the radio.
(Figure C)
(Figure A)
(Figure B)
Continue to Kit Assembly
2
1.800.221.0932
|
MetraOnline.com
DASH DISASSEMBLY
MKX 2007-2010
1. Open center console lid and unclip and
remove the center console trim panel
surrounding the shifter. (Figure A)
2. Remove (2) 9/32” screws from the
storage bin then unclip and remove the
bin. (Figure B)
3. Unclip and remove the center trim panel
as one assembly. (Figure C)
4. Remove (4) 9/32” screws securing the
radio. Unplug and remove the radio.
(Figure A)
(Figure B)
(Figure C)
Continue to Kit Assembly
REV. 8/25/2017 INST99-5813
3
DASH DISASSEMBLY
MKZ 2007-2009 / Zephyr 2006
1. Unclip and remove the top of the center
console. (Figure A)
5. Release the (3) clips securing the inner
vent cups then pull out to remove cups.
(Figure D)
2. Open ashtray door and remove ashtray
then remove (1) Phillips screw from
inside ashtray cavity. Close ashtray door.
3. Unclip and remove the climate control
and trim panel assembly starting at the
bottom edge. (Figure B)
(Figure A)
6. Remove (2) 10mm screws from the
bottom of the radio trim panel assembly
and (2) 10mm screws from inside the
vents. (Figure E)
(Figure D)
7. Unclip the radio trim panel/radio
assembly. Unplug and remove assembly.
(Figure E)
4. Open the climate control vents and pull
straight outward to remove. (Figure C)
8. Remove (4) Phillips screws securing the
radio to the trim panel and remove the
radio. (Figure F)
(Figure B)
(Figure C)
4
Continue to Kit Assembly
(Figure E)
(Figure F)
1.800.221.0932
|
MetraOnline.com
KIT ASSEMBLY
DIN radio provision with pocket
1. MKZ 2007 and Zephyr 2006 only:
Attach the corresponding radio housing
bracket to the 99-5813 radio housing
using the (4) 8X3/8” Phillips screws
supplied with kit. (All other models skip
to step 2) (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the sleeve into the radio housing
and secure by bending the metal locking
outward. (Figure B)
(Figure A)
(Figure B)
(Figure C)
4. Slide the radio back into the sleeve until
it snaps into place. (Figure C)
REV. 8/25/2017 INST99-5813
5
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. MKZ 2007 and Zephyr 2006 only:
Attach the corresponding radio housing
bracket to the 99-5813 radio housing
using the (4) 8X3/8” Phillips screws
supplied with kit. (All other models skip
to step 2) (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Secure the ISO Brackets to the radio
using the screws supplied with the
radio. (Figure B)
(Figure A)
(Figure B)
(Figure C)
4. Slide the radio into the radio housing
until the side clips snap into place.
(Figure C)
5. Snap the trim plate onto the front of the
radio housing. (Figure C)
6
1.800.221.0932
|
MetraOnline.com
REV. 8/25/2017 INST99-5813
7
99-5813
I N S TA L L AT I O N I N S T R U C T I O N S
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before
doing so, look over the instructions a second time, and make
sure the installation was performed exactly as the instructions
are stated. Please have the vehicle apart and ready to perform
troubleshooting steps before calling.
® KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
The World’s best kits.®
MetraOnline.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
REV. 8/25/17 INST99-5813