Lexus - NX 300 - Workshop Manual - 2015 - 2015 (4)

1 Fitting Instruction Description Transender AL. Running Board Brackets for Lexus NX300h/NX200t/NX200 2015 The First Note and Products Care： z Read Carefully the instruction sheet before installing. Take good care of your vehicle when installing to prevent any scratch z Check periodically to see if there’s any loose bolts and nuts to ensure safe driving. z Check periodically to see if there’s any loose bolts and nuts to ensure safe driving. The Second Function and Features: z It will be more convenient for customers to get off and get on; And it will be a good protection for the vehicle. z The Running board fits perfectly the vehicle contour, it makes the car a completely new outlook z Easy installation, use the original holes in the vehicle, no need for drilling. The Third Parts List NO Name Qty Front Brackets Specification NO Name Qty Specification 2 T­bolts2 8 M8×35 Middle Brackets 2 Plastic Buckle 8 Rear Brackets 2 Big Washer 8 Ｄ8 Ｄ8 T­bolts 1 4 M12X40 Spring Washer 8 Ｄ8 Plastic Buckle 4 D12 Hex Nut 8 M8 Big Washer 4 D12 Logo sticker 2 Spring Washer 4 Hex Nut 4 D12 M12 ⒂ NOTE: 68 inches Route 66 Sport pedals for additional Installation Picture The Forth Assembly Procedure Step One Distinguish left and right brackets according to the word in stamped in the brackets. Put assorted nuts and bolts together to make sure the installation is efficient. Step Two：Install front brackets, referring to picture one.Making use of the middle brackets installation 1 holes, put item 9&4 into installation holes, fix front brackets on the vehicle through 10、11、12、13&5、6、7、8.Don’t tighten the bolts. Step Three：Install middle brackets, referring to picture two and Installation Picture. Making use of the middle brackets installation holes and adhesive plug, put item 4 into installation holes, fix middle brackets on the vehicle through 5、6、7、8.Don’t tighten the bolts. Step Four Install rear brackets, referring to picture two and Installation Picture. Making use of the rear brackets installation holes and adhesive plug, put item 9&4 into installation holes, fix rear brackets on the vehicle through 10、11、12、13&5、6、7、8.Don’t tighten the bolts. Step Five Referring to the installation picture, fix the Route 66 Sport pedals into the brackets through bolts and nuts. Step Six：Adopt the running board to suitable height, tighten all the screws. Step Seven Car Logo sticker can put in the stainless steel insert or in the stainless steel skirt panel. Before put the sticker into the running board, make sure the area is clear, and press the sticker after put it into the running board. Make sure the sticker won’t turn back. Step Eight Check if all screws in position, and make sure all screws are screwed tightly.Installation finished. The Fifth DISCLAIMER：We are not responsible for any quality problems caused by improper installation and use. Picture one Picture two 1 Picture three