13183 / 757231
00-04 NISSAN XTERRA
6/29/2020
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 4,000 LBS. TRAILER WEIGHT & 400 LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: 6,000 LBS. TRAILER WEIGHT & 600 LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
Parts List
ITEM
1
PART NUMBER
QTY
6
20-00062
DESCRIPTION
NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ
2
2
CM-SP30
.250 x 1.38 x 8.94" SQUARE HOLE SPACER
3
6
10-10272
BOLT,CAR,1/2-13 UNC,1-3/4,GRD8,YZ
3
2
FRAME RAIL
HITCH WEIGHT: 29 LBS.
INSTALL TIME: 30 MINUTES
1
INSTALL NOTES:
NO DRILLING REQUIRED
INSTALLATION STEPS
1) Lower spare tire and remove exhaust from rearmost hanger.
2) Place square hole spacer and carriage bolts inside frame as shown.
Note: Square end of spacer must be positioned to the rear of the vehicle.
3) Raise hitch into position and fasten on with 1/2" flange nuts.
4) Torque all fasteners to 110 lb.-ft.
5) Reinstall spare tire.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.