McLaren - MP4-12C Spider - Owners Manual - 2014 - 2014

Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM SUPER SERIES OWNER’S HANDBOOK Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM ASSISTANCE ASSISTANCE Retailer Network McLaren Atlanta 24 hours: +1 770 394 4234 McLaren Tampa Bay 24 hours: +1 727 537 0626 McLaren Bergen County 24 hours: TBC McLaren Toronto 24 hours: +1 416 877 2620 McLaren Beverly Hills 24 hours: +1 818 585 9620 McLaren Vancouver 24 hours: +1 888 683 3757 McLaren Calabasas 24 hours: +1 818 585 9620 McLaren Washington DC 24 hours: +1 610 886 3000 McLaren Chicago 24 hours: +1 773 547 3877 McLaren Client Services McLaren Dallas 24 hours: +1 214 497 1082 McLaren Greenwich 24 hours: +1 203 537 9128 UK business hours: +44 148 326 1500 [email protected] McLaren Houston 24 hours: +1 844 663 0534 McLaren Long Island 24 hours: +1 516 478 4326 McLaren Mexico City 24 hours: +52 554 177 7507 The Collection McLaren (Miami) 24 hours: +1 305 442 9696 McLaren Newport Beach 24 hours: +1 714 252 3284 McLaren Philadelphia 24 hours: +1 610 886 3000 McLaren Rancho Mirage 24 hours: +1 760 773 5100 (ext 401) McLaren San Francisco 24 hours: +1 650 815 4472 McLaren Santiago 24 hours: +56 994 496 824 McLaren Scottsdale 24 hours: +1 480 544 5592 If you have been unable to obtain assistance using the number(s) listed for towing/roadside assistance, or the dealer is unable to provide towing/roadside assistance, please call 855-4McLaren (855462-5273). Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM CONTENTS BEFORE YOU DRIVE.............................................................................. 1.1 DRIVING CONTROLS ........................................................................... 2.1 INSTRUMENTS......................................................................................... 3.1 COMFORT AND CONVENIENCE.................................................. 4.1 MAINTAINING YOUR McLAREN ................................................... 5.1 VEHICLE DATA AND GLOSSARY .............................................. 6.1 INDEX .................................................................................................................7.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM INTRODUCTION INTRODUCTION Introduction Please read this information to familiarize yourself with your McLaren and its features before you drive. This provides the necessary information for you to get the optimum benefit and enjoyment from your McLaren. Before you drive Details the settings you need to make in the cockpit to ensure you are fully prepared and have safe and easy access to all controls before driving. This publication describes all options and features available for the McLaren Super Series. Certain descriptions, including those for display and menu functions, may not apply to your vehicle due to model variant, country specifications, optional equipment or the fitment of McLaren approved accessories. Driving Controls This section contains detailed information regarding the equipment and driving controls fitted to your McLaren and how to use those controls to best effect during a journey. NOTE: The images shown in this publication may not exactly reflect your unique vehicle. The documents supplied with your McLaren are an integral part of the vehicle. Ensure that you pass them onto the new owner if you sell the vehicle. The information is divided into specific sections, to assist in finding the particular information you require: 2 Instruments This section contains information on the instrument cluster, including information of how to view and change vehicle settings. Comfort and Convenience Contains information on those systems and features which make the cockpit a pleasant environment in which to spend time. Maintaining your McLaren Information on maintaining your McLaren is here. Also included is advice on using your McLaren in winter weather and if you choose to drive your vehicle abroad, what to do if something should go wrong and how to manage any possible problems which arise as a result. Information on fuses, lights and what to do if you experience a puncture. Vehicle Data and Glossary Refer to this section when you need information regarding the fluids and quantities that are required for the various systems on your McLaren, or when you need to know a specific piece of data relating to your McLaren or its performance. The Technical glossary contains a brief explanation of some of the more complex systems fitted to your McLaren. Your McLaren Retailer will be able to assist should you need more information. Index The table of contents and the index will help you find information quickly, when you need it. Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM INTRODUCTION Information about this document Electronic User Manual McLaren is constantly updating its vehicles to meet and exceed the latest technologies. McLaren therefore reserves the right to introduce changes in design, equipment and technical features at any time. If your vehicle is fitted with an electronic user manual, the Owner’s Handbook and IRIS User Guide are available on the IRIS screen. © McLaren Automotive Limited. This publication must not be reproduced, translated or reprinted, in whole or in part, without written permission from McLaren Automotive Limited. The equipment fitted to your McLaren may vary from that shown depending on vehicle and market specification. Your McLaren may vary from the images shown depending on vehicle and market specification Select the OWNER’S HANDBOOK or IRIS USER GUIDE to access the information. This vehicle may be covered by patents. See cars.mclaren.com/patents Printed in United Kingdom, 11Q1188CP.01 To access the manuals, navigate to the APPS screen and select USER MANUAL. This will launch the user manual application. 3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM INTRODUCTION The Library icon appears at the top of the main contents page. Selecting the library button will return you to the library where all available owner information can be accessed. The Home icon appears at the top and the bottom of each page. Selecting the home button will return you to the main contents page. The icons at the bottom of the screen (end of the section) can be used to navigate to the previous or next section as required. Select the chapter required, this will take you to the chapter contents page. Select the section required from the chapter contents to access the required information. NOTE: Selecting the INDEX from the main contents page will navigate you to an alphabetical index of topics covered in the Owner’s Handbook. The INDEX is not available for the IRIS User Guide. When the section is displayed, the screen can be scrolled by touching the screen and dragging a finger up or down as required. Hotspot links are identified by orange underlined text. Selecting a hotspot link will navigate you to the information identified in the text. 4 Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM INTRODUCTION Symbols You will find the following symbols in this Owner’s handbook. These symbols are intended to give you an instant visual message on what type of information is being displayed. Warnings A warning draws your attention to activities that could cause injury or death. Notes Notes draw your attention to activities that contain possible risks to your McLaren, provide advice that you may find useful, or give additional information regarding a particular subject. Environmental note Environmental notes give you tips on minimizing the impact of you and your vehicle on the environment. 5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM INTRODUCTION Operating safety WARNING: The electronic systems fitted to your McLaren interact with each other. Tampering with these systems could cause malfunctions in other interconnected systems. Such faults could seriously endanger the operational safety of your McLaren and your own safety. Additional work or modifications made to the vehicle, which have been carried out incorrectly can also affect its operating safety. Vehicle use Observe the following when using your McLaren: • the safety notes throughout this information • road traffic laws and regulations WARNING: There are various warning labels attached to your McLaren. These are intended to make you and others aware of various risks. Do not remove any warning labels from the vehicle. If you remove these warning labels, you or others may not then be aware of dangers, which may result in an injury. Ground clearance WARNING: Damage to the front of the vehicle may occur when approaching steep inclines or declines. Drive with care when: • approaching curbs • approaching steep inclines • departing steep declines • driving on rough roads • driving in areas where traffic calming measures have been deployed • driving in any other environment where sudden changed of road surface height or elevation are encountered such as car parks See Vehicle dimensions - except 675LT, page 6.8. See Vehicle dimensions - 675LT, page 6.9. 6 Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM INTRODUCTION Track driving To achieve optimum performance and reliability it is important to ensure the following preconditions are met before attempting to drive your vehicle on a track: • engine oil is at normal operating temperature • water is at normal operating temperature • tires should not exceed the safe operating temperatures NOTE: Before you use your vehicle on the track, consult your McLaren Retailer. McLaren recommend that your vehicle is inspected before and after track use. NOTE: Always drive within your limits and the limits of the vehicle. hard braking or carrying out excessive gear changes, this uses the airflow to cool the vehicle. We recommend that time is allowed for your vehicle to return to normal operating temperatures before leaving the track. NOTE: When stopping the vehicle directly after performance driving we recommend that the ignition is not immediately switched off or the parking brake is applied. We recommend that the engine is left to idle prior to the ignition being switched off. NOTE: Please refer to your Service & Warranty Guide for track and competition use implications. Cooling down We recommend you take time to cool the vehicle during track driving due to the high temperatures that may be generated by the brakes and transmission which could affect performance. Time should be taken to drive the vehicle at a slower speed without using 7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING General................................................................................................................. 1.2 Opening a door................................................................................................. 1.5 Locking a door .................................................................................................. 1.6 Mislock ................................................................................................................. 1.7 Individual settings ........................................................................................... 1.8 Locking and unlocking from inside.......................................................... 1.8 Opening a door from inside......................................................................... 1.9 Closing a door................................................................................................. 1.10 Automatic locking ........................................................................................ 1.10 Engine cover................................................................................................... 1.11 Luggage compartment .............................................................................. 1.14 Retractable Roof - Spider models .......................................................... 1.16 Backlight - Spider models.......................................................................... 1.19 Tonneau Cover - Spider models ............................................................. 1.20 STOWING LUGGAGE Stowage Luggage - Spider models........................................................ 1.23 ANTI-THEFT SYSTEM Alarm system.................................................................................................. 1.26 Immobilizer ..................................................................................................... 1.26 Tow-away protection .................................................................................. 1.27 Interior motion sensor................................................................................ 1.28 SEATS Safety................................................................................................................. 1.29 Manual seats - except 675LT ................................................................... 1.29 Racing seats .................................................................................................... 1.30 Electric seats................................................................................................... 1.31 STEERING WHEEL AND STEERING COLUMN Manual steering wheel adjustment....................................................... 1.36 Electric steering wheel adjustment ...................................................... 1.37 Horn ................................................................................................................... 1.38 OCCUPANT SAFETY Seat belts ......................................................................................................... 1.39 Supplementary Restraint System.......................................................... 1.41 Child passengers........................................................................................... 1.47 MIRRORS Safety................................................................................................................. 1.50 Interior mirror ................................................................................................ 1.50 Exterior mirrors.............................................................................................. 1.50 LIGHTING Exterior lighting - except 675LT ............................................................. Exterior lighting - 675LT ............................................................................ Light switch..................................................................................................... Hi beam headlamps..................................................................................... Daytime running lamps.............................................................................. Rear fog lamp ................................................................................................. Turn signals..................................................................................................... Hazard warning lamps................................................................................ Parking lights.................................................................................................. 1.52 1.53 1.54 1.55 1.56 1.56 1.57 1.57 1.58 WASHERS AND WIPER Windscreen wiper......................................................................................... 1.59 VEHICLE LIFT Vehicle Lift Operation................................................................................. 1.61 1.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING OPENING AND CLOSING General The vehicle can be unlocked or locked either by using the keyless entry feature, or by pressing the appropriate button on the key fob. Four sensors detect where the key fob is around the vehicle. The keyless entry feature requires the key to be within 5 feet (1.5 meters) of the door sensors. NOTE: To prevent theft, only use the key fob in the immediate vicinity of the vehicle. For your convenience, provided that the engine is not running, the car can be locked irrespective of the electrical status, see Vehicle electrical status, page 2.3. Keyless entry Keyless entry allows the driver to unlock and disarm the vehicle by simply opening the door when the key fob is within 5 feet (1.5 meters) of the door sensors. The key fob needs only to be on the driver's person or in a non-metallic container such as a bag. It does not need to be exposed or handled. 1.2 Key fob entry Your McLaren includes two remote control key fobs. The key fob allows you to remotely lock and unlock the vehicle. The key fob locks and unlocks the following: • the doors (including fuel filler flap) • the luggage compartment 1. 2. 3. 4. In vehicle sensor Left-hand door sensor Right-hand door sensor Cup holder sensor Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING NOTE: If the vehicle is dirty or wet, is advisable to open the doors using the key fob. A quick double press of the unlock button will unlatch the driver’s door. A long press and hold on the unlock button will unlatch the passenger’s door. WARNING: The key fob allows the engine to be started and is also used to activate other features on the vehicle. To unlock the vehicle, using the key fob, press the unlock button. The front, rear and side turn signals flash twice and the anti-theft alarm system is deactivated. The unlock button operation changes depending whether the DRIVER or BOTH is selected in the vehicle settings, see Door Unlock, page 3.14. Take the key fob with you, every time you leave the vehicle. NOTE: Do not expose the key fob to high levels of electromagnetic radiation. Doing so may cause it to function incorrectly. For example close proximity to laptops, tablets, personal media players, or cell phones. Unlock Button Single Press Outcome If BOTH is selected, a single press of the button unlocks both doors. If DRIVER is selected, a single press of the button unlocks the driver’s door. A second press (after a pause) unlocks the passenger’s door. If BOTH is selected, a double press of the button unlocks both doors and unlatches the driver’s door. Double Press If DRIVER is selected, a double press of the button will unlock and unlatch the driver’s door only. Long Press A long press of the button will unlock both doors and unlatch the passenger’s door. 1.3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Stowing the key fob For security, it is recommended that the key fob stays on your person when you are in the car. If, however, you wish to stow the key fob within the car, ensure that it is not left in plain view. NOTE: If the message ‘key not found in vehicle’ appears on the instrument cluster, reposition key fob until it is detected. NOTE: Do not stow the key fob in the center console stowage compartment, in the cup holders, in the stowage nets between the seats, or on the shelf immediately behind the seats as the system will not detect its presence and the engine will not start. 1.4 Discharged battery If you are unfortunate enough to experience a fully discharged battery, the vehicle can still be opened using the mechanical key, see Unlocking - discharged battery, page 5.25. Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Opening a door NOTE: Because the door opens outwards and then upwards, ensure sufficient side and overhead clearance before opening a door. See Vehicle dimensions - except 675LT, page 6.8. 1. Press the button (1) firmly to unlock and unlatch the door. WARNING: Always stand to the rear of the door before opening it, as the opening action may cause injury. The speed that the door opens will be affected by ambient temperature. See Vehicle dimensions - 675LT, page 6.9. 2. If keyless entry is used, the front, rear and side turn signals (market specific) will flash twice, and the anti-theft alarm system is deactivated. 3. The door latch will then release, allowing the door to be partially raised before it automatically swings outwards and upwards. The mirrors will unfold if folded. NOTE: If the vehicle is dirty or wet, it is advisable to open the doors using the key fob. NOTE: When the door is opened, the window will lower slightly. It will raise to the closed position once the door is shut. If the window does not lower, for example, due to a discharged battery or freezing temperatures, take care when opening and closing the door. Do not force the door during opening or closing, as this could lead to the door seals or window becoming damaged. NOTE: A sustained long press and hold on the unlock button will automatically lower the window on that side of the vehicle. The window will continue to lower until the unlock button is released or the windows are fully lowered. NOTE: If the vehicle is unlocked using the key fob but the doors or luggage compartment are not opened, the vehicle will relock after 30 seconds. A quick double press of the unlock button will unlatch the driver’s door. A long press and hold on the unlock button will unlatch the passenger’s door. 1.5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Locking a door NOTE: A sustained long touch and hold on the lock sensor will automatically raise the window. The window will continue to raise until the lock sensor is released or the window is fully closed. 4. The turn signals flash to indicate that the anti-theft alarm system is activated and the mirrors will fold. 1. Close the door. See Closing a door, page 1.10 2. To lock the vehicle using the key fob, press the lock button. The front, rear and side turn signals flash in a rapid, circular sequence around the car. The anti-theft alarm system is activated. 1.6 3. If using the keyless entry feature, touch the lock sensor (1) on the bodyside. NOTE: Ensure the key is within a 5 feet (1.5 meters) range of the door sensors when using the keyless entry feature. NOTE: The lock sensor will recognize a single touch. NOTE: When the door is opened the door glass will lower slightly to avoid contact with other parts of the vehicle. When the door is closed the glass will rise to the closed position automatically. If for any reason the door glass does not rise it is likely that the system has sensed a “trap” event. This can be caused by debris in the glass channel or misalignment of the glass. Ensure there are no obvious signs of debris in the glass channel, and hold the lock button. The glass will rise providing the door is correctly closed and there are no obstructions preventing it rising. If the glass does not close, or the glass repeatedly fails to automatically raise, contact your McLaren Retailer. Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Mislock NOTE: If the doors are open or the key fob is still inside the vehicle, a momentary sounding of the alarm horn will alert you. If the luggage compartment lid or engine cover is open, a long tone will alert you. The long tone will also indicate that the tonneau cover is open or the roof is not fully open or fully closed on Spider models. If either the doors, the luggage compartment lid or the engine cover are left open, or the key fob is still inside the vehicle, an audible ‘mislock’ signal will sound when an attempt to lock the vehicle is made when the lock button on the key fob is pressed. On Spider models, the ‘mislock’ signal will also sound when an attempt is made to lock the vehicle if the tonneau cover is not fully closed or if the roof is not fully opened or fully closed. Check that the doors, the luggage compartment lid, the engine cover and the tonneau cover (Spider only) are all closed and that the roof is fully open or fully closed (Spider only), then relock the vehicle. NOTE: The car can be locked/alarmed with the luggage compartment open. A long tone is sounded to alert you of this condition, and differs to the short tone sounded for door open/key in car mislock. The luggage compartment will become alarmed as soon as the luggage compartment lid is closed. This will allow you to connect the battery charger to the charging point in the luggage compartment whilst leaving the rest of the vehicle locked. 1.7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Individual settings Locking and unlocking from inside If you frequently travel without passengers, you can change the locking system so that only the driver's door is unlocked, see Auto Door Lock, page 3.14. If only the driver's door has been configured to unlock, the passenger’s door can only be unlocked by either pulling the passenger’s door internal handle, pressing the unlock button on the key fob again or by unlocking the car from the central locking button on the center console. 1. Press the central locking button to lock the vehicle, the light in the button will illuminate to indicate that the vehicle is locked. 2. Press the central locking button again to unlock the vehicle and the light in the button will extinguish. 1.8 Mclaren P11 - Complete.book Page 9 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Opening a door from inside A door can be opened from inside the vehicle at any time, even if it has been locked. Open the doors only if the vehicle is stationary and road and traffic conditions permit. NOTE: Because the door opens outwards and then upwards, ensure sufficient side and overhead clearance before opening a door. 1. Pull door handle upwards, in direction of arrow, and push the door outwards until the opening mechanism takes over. The door will then swing outwards and upwards automatically. NOTE: When the door is opened, the window will lower slightly. It will raise to the closed position once the door is shut. If the window does not lower, take care when opening and closing the door. Do not force the door during opening or closing, as this could lead to the door seals or window becoming damaged. 1.9 BEFORE YOU DRIVE OPENING AND CLOSING Closing a door Automatic locking 1. Push/pull the door downwards and ensure that it latches securely. WARNING: Keep hands and other objects clear of the door edge when closing. This is particularly important for vehicles fitted with soft close latches as the door will automatically continue to the fully closed position when the first catch has engaged. There is no anti-trap feature preventing the door closing if an item or body part is trapped between the door and the door aperture, serious injury and vehicle damage may occur. If the window does not close, this may be due to an anti-trap event. Try one of the following: • reopen and close door • lock vehicle using the lock sensor on the bodyside 1.10 The doors and the luggage compartment lock automatically after the vehicle has driven away. NOTE: The doors unlock automatically in an accident if the force of the impact exceeds a predetermined level. The automatic locking function is selectable in the vehicle settings section of the instrument cluster, see Auto Door Lock, page 3.14. If automatic locking is ON, the interior central locking button will illuminate once the vehicle locks on drive away. In the event of continuous anti-trap events, press the lock sensor (1) for a few seconds. The window will continue to rise until you remove your hand from the lock sensor. Only attempt this if the above methods do not resolve the problem. NOTE: Do not force the door closed, the door seals or window could be damaged. Mclaren P11 - Complete.book Page 11 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Engine cover WARNING: The exhaust tail pipes can be very hot and there is a risk of severe burns. Only open the engine cover from the side of the vehicle. Opening - except 675LT WARNING: There is a risk of injury if the engine cover is open, even when the engine is not running. Engine components become very hot and there is a risk of severe burns. The engine ignition system carries a high voltage. Never touch ignition system components; ignition coils, ignition wiring (spark plug connections). 1. Press the release button on the rear edge of the driver's door, the engine cover will open slightly. 2. From the side of the vehicle, grasp the lower edge and lift the engine cover. The gas struts will support it in the raised position. 1.11 Mclaren P11 - Complete.book Page 12 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Closing - except 675LT WARNING: The exhaust tail pipes can be very hot and there is a risk of severe burns. Only close the engine cover from the side of the vehicle. Opening - 675LT - except Spider 1. Remove the engine cover opening tool from the tool kit. See Luggage compartment equipment - 675LT, page 5.10. Pull the engine cover down squarely from the side of the vehicle and ensure that the cover latches securely on both sides. Ensure engine cover is secure once closed. 3. From the side of the vehicle, grasp the lower edge and lift the engine cover. 2. Insert the engine cover opening tool into each guide hole located underneath the lower corners of the engine cover. Rotate 45° counter-clockwise for the left-hand side, clockwise for the right-hand side. Unlatch both sides of the engine cover. 1.12 Mclaren P11 - Complete.book Page 13 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Opening - 675LT Spider 1. Remove the engine cover opening tool from the tool kit. See Luggage compartment equipment - 675LT, page 5.10. 4. Release the support stay from the retaining clips on the underside of the engine cover (1). 5. Locate the T end of the support stay into the slot on the body and locate the other end into the grommet on the underside of the engine cover to secure it in the open position (2). 3. From the side of the vehicle, grasp the lower edge and lift the engine cover. 2. Insert the engine cover opening tool into each guide hole located underneath the lower corners of the engine cover. Rotate 45° clockwise for the left-hand side, anti-clockwise for the right-hand side. Unlatch both sides of the engine cover. 1.13 Mclaren P11 - Complete.book Page 14 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Closing - 675LT WARNING: The exhaust tail pipes can be very hot and there is a risk of severe burns. Only close the engine cover from the side of the vehicle. 4. Release the support stay from the retaining clips on the underside of the engine cover (1). 5. Locate the T end of the support stay into the slot on the body and locate the other end into the grommet on the underside of the engine cover to secure it in the open position (2). WARNING: Do not open the roof when the engine cover is open. 1.14 1. From the side of the vehicle, hold the support stay and lift the engine cover slightly to release the stay from the recess on underside of the cover. 2. Release the T end of the support stay from the body and secure it to underside of the engine cover using the retaining clips. 3. Lower the engine cover down squarely from the side of the vehicle and ensure the cover latches are secure on both sides. Ensure engine cover is secure once closed. Mclaren P11 - Complete.book Page 15 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Luggage compartment Opening 1. Press the button on the key fob the luggage compartment will unlock and open slightly. 2. Alternatively, press the button to unlock and open the luggage compartment. 3. Release the safety latch and open the luggage compartment. NOTE: The luggage compartment will only open if the vehicle is stationary. NOTE: The luggage compartment is located at the front of the vehicle. 1.15 Mclaren P11 - Complete.book Page 16 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Closing WARNING: Ensure that no one can be trapped as you close the luggage compartment. 1. Pull the luggage compartment lid down firmly and ensure that it is latched securely. NOTE: Do not leave the key fob in the luggage compartment, as the vehicle may lock, and you may be locked out of the car. NOTE: If the vehicle had previously been locked, it will still be locked and the turn signals will flash as the lid closes. 2. The luggage compartment will become alarmed as soon as the luggage compartment lid is closed. NOTE: The car can be locked/alarmed with the luggage compartment open. This will allow you to charge the battery while leaving the rest of the vehicle locked. A long tone is sounded to alert you of this. 1.16 Luggage compartment internal release button WARNING: Unsupervised children could lock themselves in an open luggage compartment and risk injury. Children should be taught not to play in or around the vehicle. The button is located at the front of the internal luggage compartment area. The button is illuminated green when the car is awake and flashes when the vehicle is locked or shut down. This operation is completely independent of ignition state. There are 2 modes to the button: A mechanical luggage compartment internal release button is provided as a means of escape for children and adults in the event they become locked inside the luggage compartment. 1. If the vehicle is in motion when the button is pressed, the primary latch releases to allow air to enter the luggage compartment, but is prevented from opening by the secondary latch. 2. If the vehicle is stationary, both latches will release to allow the occupant to exit the luggage compartment. Mclaren P11 - Complete.book Page 17 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Retractable Roof - Spider models The retractable roof comprises of two lightweight panels which, when operated, fold swiftly beneath the tonneau panel located behind the cockpit. The roof must only be operated if the stowage bags are not in use and stored securely in the stowage mounts. The roof is operated using the switch on the center console. Roof Operating Temperature Minimum ambient operating temperature 14°F (-10°C) NOTE: Roof operation is inhibited when operated below the minimum ambient operating temperature. The roof can be operated at speeds up to 25 mph (40 kph). WARNING: Do not place any objects between the moving parts of the roof. Make sure any occupants or bystanders are clear of the roof during operation. Operation of the roof may cause personal injury or damage to components. WARNING: Do not operate the roof if the stowage bags are fitted and in use in the tonneau area. The roof system and/or the backlight glass could be damaged. WARNING: To avoid damaging the operating mechanism and the vehicle interior, carefully remove surface water, ice or snow before operating the roof. NOTE: Do not sit, stand or place any load on the backlight interior trim panel. If you experience any problems with the roof, contact your Authorized McLaren Retailer immediately. NOTE: If the vehicle is stopped with the roof open, it is possible to close the roof before the vehicle goes to sleep to leave it secure. 1.17 Mclaren P11 - Complete.book Page 18 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Opening the roof 1. The vehicle must be awake with key present. NOTE: Operation of the roof will be halted whilst the engine is cranking. NOTE: If the tonneau cover has been opened at any time while the roof is closed, the message ‘Confirm Tonneau Empty' will be displayed on the left-hand instrument cluster. 3. Check the tonneau area is empty and the stowage bags are correctly stowed. Press OK on the menu stalk, once you have confirmed this. 2. Press and hold the switch to operate the roof. If you release the switch, the roof will stop until you press the switch again. 4. Press and hold the switch until the roof is fully open (stowed). 1.18 NOTE: When the roof starts to move, the tonneau cover will open and the backlight glass will drop slightly. The message ‘Roof Operation In Progress’ will appear on the left-hand instrument cluster. 5. Once the roof is fully open (stowed), the tonneau cover will close and the backlight glass will return to an aero position to reduce wind buffeting in the cockpit. The message ‘Roof Open’ will appear on the left-hand instrument cluster. An audible tone will confirm that the roof cycle is complete. 6. If the switch is held in the down position after the operation has completed, the windows and backlight will open fully. 7. If the vehicle speed rises above 25 mph (40 kph) while the roof is being operated, roof operation is paused. The message ‘Reduce Vehicle Speed, Release and Repress Button For Roof Operation’ will appear on the left-hand instrument cluster. Mclaren P11 - Complete.book Page 19 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING 8. Reduce the vehicle speed to below 25 mph (40 kph) and release the switch. The message ‘Continue Roof Cycle’ will appear on the left-hand instrument cluster. Press the switch again to continue desired roof cycle. NOTE: If the roof is not fully opened or closed, within 7 minutes the system will lower the roof to the nearest rest position. If this happens the roof will not be securely latched and the roof must be fully opened/closed to make it secure before driving the vehicle. Closing the roof 1. The vehicle must be awake with key present. NOTE: Operation of the roof will be halted while the engine is cranking. 2. Pull and hold the switch until the roof is in the fully raised (closed) position. 3. If you release the switch, the roof will stop until you press the switch again. 4. If the vehicle speed rises above 25 mph (40 kph) while the roof is being operated, roof operation is paused. The message ‘Reduce Vehicle Speed, Release and Repress Button For Roof Operation’ will appear on the left-hand instrument cluster. 5. Reduce the vehicle speed to below 25 mph (40 kph) and release the switch. The message ‘Continue Roof Cycle’. will appear on the left-hand instrument cluster. 6. Pull the switch to continue closing until the roof and tonneau are fully closed and latched. The window and backlight glass will raise to the fully closed position. An audible tone will confirm that the roof cycle is complete. 7. Continuing to hold the switch after the roof cycle is complete will lower the window and backlight glass. NOTE: If the roof is not fully opened or closed, within 7 minutes the system will lower the roof to the nearest rest position. If this happens the roof will not be securely latched and the roof must be fully opened/closed to make it secure before driving the vehicle. 1.19 Mclaren P11 - Complete.book Page 20 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Backlight - Spider models WARNING: If the tonneau area is being used to stow luggage, please ensure that the stowage bags provided with the vehicle are used. If not, operation of the backlight could lead to damage to the backlight glass. 3. Check the tonneau area is empty and the stowage bags are correctly stowed. Press OK on the menu stalk, once you have confirmed this. Lower the backlight, with the roof open, to obtain additional air flow around the cockpit. Raise the backlight to an aero position to reduce wind buffeting in the cockpit. NOTE: It is only possible to operate the backlight if the vehicle is awake with the key present. The backlight switch is located on the center console. NOTE: If you experience any problems with the backlight, contact your Authorized McLaren Retailer immediately. Opening 1. The vehicle must be awake with the key present. 1.20 2. Press and hold the switch to lower the backlight. If you release the switch, the backlight will stop until you press the switch again. NOTE: If the tonneau cover has been opened while the roof is closed, the message ‘Confirm Tonneau Empty' will be displayed on the left-hand instrument cluster. 4. Press and hold the backlight switch to lower the backlight to the desired position. NOTE: Do not fully open the backlight when it is raining or snowing, as water could enter the cabin area and affect electrical components. Mclaren P11 - Complete.book Page 21 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Tonneau Cover - Spider models Closing 1. The vehicle must be awake with the key present. The tonneau cover is the panel behind the cockpit. The tonneau cover can be opened and closed and allows access to the area below. NOTE: Access to the tonneau storage area can only be made using the tonneau open/close buttons on the driver’s door switch panel. The retractable roof is stowed in the area underneath the tonneau cover when the roof has been lowered. The tonneau cover is then closed. NOTE: The key must be within range of the driver’s door to enable tonneau control. Opening 1. The vehicle must be awake with key present. 2. Pull and hold the backlight switch to raise the backlight until the backlight is in the desired position. NOTE: If the vehicle is stopped with the backlight open, you are able to close the backlight before the vehicle goes to sleep to leave it secure. WARNING: Do not place any objects between the moving parts of the tonneau. Make sure any occupants or bystanders are clear of the tonneau during operation. Operation of the tonneau may cause personal injury or damage to components. NOTE: Do not operate the tonneau cover whilst loading/unloading of the tonneau area is taking place. The vehicle will remain awake for a maximum of fifteen minutes while the tonneau is open. 2. Press and hold the button on the rear edge of the driver's door until the tonneau cover is fully open. NOTE: The tonneau cover cannot be opened if the roof is open. 1.21 Mclaren P11 - Complete.book Page 22 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING 3. Check the tonneau area is empty and the stowage bags are correctly stowed. Press OK on the menu stalk, once you have confirmed this. Closing WARNING: Ensure that no one can be trapped as you close the tonneau cover. NOTE: The message ‘Tonneau Operation In Progress’. will appear on the left-hand display. NOTE: The tonneau area will be alarmed when the vehicle is locked. NOTE: Do not overfill the stowage bags. This could cause a tonneau cover fault, contact your Authorized McLaren Retailer immediately. 4. If the vehicle is driven whilst the tonneau cover is open, the message ‘Tonneau Cover Open’ will appear on the left-hand display, accompanied by an audible alert. NOTE: Only stow items in the tonneau area in the storage bags provided with your McLaren. See Stowage Luggage Spider models, page 1.24. 1.22 1. Press and hold the button on the rear edge of the driver's door until the tonneau cover is fully closed. NOTE: The tonneau cover can be closed for up to 15 minutes once it has been opened whilst the ignition is off. If this time has elapsed, switch the ignition on again to close the tonneau cover. Mclaren P11 - Complete.book Page 23 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OPENING AND CLOSING Tonneau cover internal release button WARNING: Unsupervised children could lock themselves in an open luggage compartment and risk injury. Children should be taught not to play in or around the vehicle. The button is located at the front of the internal luggage compartment area. The button is illuminated green when the car is awake and flashes when the vehicle is locked or shut down. This operation is completely independent of ignition state. A mechanical luggage compartment internal release button is provided as a means of escape for children and adults in the event they become locked inside the luggage compartment. 1.23 Mclaren P11 - Complete.book Page 24 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE STOWING LUGGAGE STOWING LUGGAGE Stowage Luggage - Spider models When the roof is raised, the area underneath the tonneau cover can be used for storing small items. Your McLaren is supplied with two stowage bags for this purpose. WARNING: Do not place loose items in the tonneau area. This could lead to damage to the roof system and/or the backlight glass. NOTE: Only use the stowage bags provided. No other type of luggage bag can be used. The warning label on the interior of the tonneau cover confirms this. NOTE: Ensure the contents do not exceed the recommended fill level identified by the red line on the rear of the bulkhead area. The warning label on the bulkhead confirms this. NOTE: Do not overfill the stowage bags. The weight of each stowage bag and contents should not exceed 33 lbs (15 kg). NOTE: Do not fill the stowage bags with any of the following: • hazardous and/or volatile compounds or liquids • heavy and/or sharp objects • foods and/or liquids affected by heat The stowage bags can be filled while in the tonneau area or out of the vehicle. 1.24 • fragile items or items which are easily breakable Mclaren P11 - Complete.book Page 25 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE STOWING LUGGAGE NOTE: Ensure the stowage bags are securely fitted when in use and are attached to all the location points. Installing stowage bags 1. Open the tonneau cover. Tonneau Cover - Spider models, page 1.21 2. Remove the stowage bags from the mounts inside the tonneau cover. 3. Release the toggle and unroll the stowage bags. 4. Place the items inside the stowage bags and/or place the stowage bags in the tonneau area. 5. Ensure the McLaren logos are facing towards the rear bulkhead and outboard of the vehicle. 6. Attach the carry handle (1) to the fixing area. 7. Attach the secondary loop (2) to the secondary fixing point. NOTE: Zip the stowage bags fully closed when in use. This will prevent items from falling out and damaging the roof system and/or backlight glass. 1.25 Mclaren P11 - Complete.book Page 26 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE STOWING LUGGAGE Removing and storing the stowage bags 1. Detach the carry handle (1) from the fixing area. 2. Detach the securing loop (2) from the secondary fixing point. 3. Remove the stowage bag from the tonneau area and remove the contents. 4. Place the empty stowage bag on a flat surface with the McLaren logo facing downwards. 1.26 5. Fold in the thinner portion of the stowage bag, followed by the thicker portion and then turn the stowage bag over. 6. With the McLaren logo facing upwards, tightly roll the stowage bag and secure by wrapping the toggle around it and under the locating point. 7. Place the stowage bag in the tonneau area into the stowage mounts, ensuring it is secure by placing the securing strap over the stowage mount. NOTE: This process is detailed on a label attached to the inner surface of the tonneau cover. 8. Repeat the process for the second stowage bag. NOTE: Make sure the stowage bags are fitted to the stowage mounts when not in use. Mclaren P11 - Complete.book Page 27 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE ANTI-THEFT SYSTEM ANTI-THEFT SYSTEM Alarm system A visual and audible alarm is triggered if the alarm system is armed and any of the following are opened: • a door • the engine cover Arming the alarm system 1. Lock the vehicle (using the keyless system or the key fob). The anti-theft alarm system will be armed after approximately 5 seconds. Disarming the alarm system 1. Unlock the vehicle (using the keyless system or the key fob), the alarm will disarm and the light in central locking button will stop flashing. • the luggage compartment lid • the tonneau cover (Spider only) NOTE: The alarm remains triggered even if you close the open aperture. To silence the alarm, unlock the vehicle. The alarm system also incorporates the following features: • tow-away protection • interior motion sensor • center console bin NOTE: The center console stowage compartment must be closed for the interior motion sensor or the Auto Alarm to become armed. 2. The light in the central locking button will illuminate for approximately 60 seconds after locking the vehicle 1.27 Mclaren P11 - Complete.book Page 28 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE ANTI-THEFT SYSTEM Immobilizer Tow-away protection The immobilizer prevents your McLaren from being started by an unauthorized person. Tow-away protection is designed to prevent any attempt to steal the vehicle by suspended tow or by lifting onto a trailer. The vehicle is automatically immobilized when it senses that there is no key fob present in the vehicle. Remobilization occurs when a key fob is sensed inside the vehicle. NOTE: Immobilization will only occur if the engine is not running The alarm is triggered if the vehicle is raised or tilted in any way. Tow-away protection is armed approximately 30 seconds after the vehicle has been locked and is disarmed when the vehicle is unlocked. Disabling tow-away protection Disable tow-away protection manually if your vehicle is being transported, e.g. loaded onto a ferry or vehicle transporter or your vehicle is parked on a movable surface, e.g. in a splitlevel garage. 1. To disable tow-away protection, switch off the ignition, open the driver's door and press the button on the rear edge of the driver's door. The light in the switch will illuminate to indicate that tow-away protection has been disabled. NOTE: You cannot disable tow-away protection if the ignition is switched on. 2. Close the driver's door and lock the vehicle (using the keyless system or the key fob). Tow-away protection remains disabled until you unlock the vehicle. 1.28 Mclaren P11 - Complete.book Page 29 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE ANTI-THEFT SYSTEM Interior motion sensor The alarm is triggered if your vehicle is locked and movement is detected inside, e.g. if someone breaks a window or reaches into the vehicle through an open window. Disabling the interior motion sensor Disable the interior motion sensor if people or animals are to remain in the locked vehicle. The interior motion sensor is armed approximately 30 seconds after the vehicle has been locked and is disarmed when the vehicle is unlocked. NOTE: You cannot disable the interior motion sensor if the ignition is switched on. 2. Close the driver's door and lock the vehicle (using the keyless system or the key fob). The interior motion sensor remains disabled until you unlock the vehicle. NOTE: To prevent false alarms close the windows when leaving the vehicle and do not hang anything on the interior mirror. 1. To disable the interior motion sensor, switch off the ignition, open the driver's door and press the button on the rear edge of the driver's door. The light in the switch will illuminate to indicate that the interior motion sensor has been disabled. 1.29 Mclaren P11 - Complete.book Page 30 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE SEATS SEATS Safety WARNING: Adjust the driver's seat when the vehicle is stationary. You may not be able to observe road and traffic conditions and you could lose control of the vehicle as a result of the seat moving. You could therefore cause an accident. WARNING: The seats can be moved even without a key fob in the vehicle. Do not leave children unattended in the vehicle, they could be injured if a seat is moved accidentally. WARNING: Ensure that no one can become trapped as the seat moves. To reduce the risk of injuries in the event of an accident, observe the following: • All vehicle occupants must select a seat position that allows the seat belt to be worn correctly, but is as far away from the front air bags as possible. The position of the driver's seat must allow the driver to drive the vehicle safely. The distance from the driver's seat to the pedals must be 1.30 Manual seats - except 675LT such that the driver can fully depress the pedals. The distance between the driver's chest and the center of the air bag cover must be more than 10 inches (25 centimeters). The driver's arms should be slightly bent when holding the steering wheel. • Vehicle occupants must always wear their seat belt correctly. • Position the passenger’s seat as far back as is comfortable. WARNING: McLaren Automotive does not recommend the use child seats in this vehicle, but if you choose to do so, please follow the below guidelines: • Children under 4 ft 5 in (1.35 meters) tall or younger than 12 years of age must be secured in a suitable child restraint. • If you are using a child restraint on the passenger’s seat, move the seat as far back as possible. Manual seat forward and rearward adjustment Lift the lever, move the seat to the desired position and release the lever to lock the seat. WARNING: Ensure the seat is locked in position before driving. NOTE: Ensure that there are no items of luggage in the footwell or behind, underneath or to the side of the seats. This may lead to the seats being damaged. Mclaren P11 - Complete.book Page 31 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE SEATS Racing seats Manual seat backrest rake adjustment WARNING: To minimize the risk of injury, position the backrest as close as possible to vertical. Manual seat height adjustment NOTE: Do not recline the seat backrest so that it repeatedly contacts the rear bulkhead as this could lead to damage over a period of time. NOTE: Racing seats are standard on the 675LT. The passenger’s seat of the 675LT is in a fixed position as standard. Alternatively, a sliding seat may be fitted as an option. Seat Forward and Rearward Adjustment Press the switch up or down until the seat reaches the desired height. NOTE: Height adjustment is only available on the driver's seat. Lift the lever, move the seat backrest to the position required, and release the lever. NOTE: It is only possible to adjust the forward and rearward position of the seat. 1.31 Mclaren P11 - Complete.book Page 32 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE SEATS Electric seats To adjust the seat, lift the lever and slide the seat to the desired position, ensuring you can comfortably reach all pedals and are able to move them through their full travel. WARNING: Ensure the seat is locked in position before driving. NOTE: Ensure that there are no items of luggage in the footwell or adjacent to the seats as this may lead to the seats being damaged or not getting full adjustment. Seat Height Adjustment For seat height adjustment, contact your McLaren Retailer. WARNING: Seat height adjustment should only be carried out by your McLaren Retailer. 1.32 Electric seat adjustment Forward and rearward adjustment The seat adjustment switch is on the front face of the seat base and can be used when the vehicle is in any awake status, see Vehicle electrical status, page 2.3. NOTE: Ensure there are no items of luggage in the footwell or behind, beneath or to the side of the seats, or the seats may be damaged. Press the switch (1) up or down until the seat reaches the desired position. Mclaren P11 - Complete.book Page 33 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE SEATS Electric seat height adjustment Electric seat backrest rake adjustment WARNING: To minimize the risk of injury, position the backrest as close as possible to vertical. NOTE: When reclining the backrest, the seat base will automatically move forward, depending on its position relative to the rear bulkhead. If the seat base is moved backwards when the backrest is fully reclined, the backrest will automatically raise to prevent contact with the rear bulkhead. NOTE: Do not recline the seat backrest so that it repeatedly contacts the rear bulkhead as this could lead to damage over a period of time. Press the switch (2) up or down until the backrest is in the required position. WARNING: Ensure there are no items beneath the passenger’s seat or the occupant classification system may not function correctly. Press the switch (3) up or down until the seat reaches the desired height. 1.33 Mclaren P11 - Complete.book Page 34 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE SEATS Electric seat lumbar adjustment Storing a seat and mirror position Specific seat and exterior mirror positions can be stored for up to three drivers. Recalling a seat and mirror position WARNING: Only recall a seat, mirror position and steering wheel position, when the vehicle is stationary. You may not be able to observe road and traffic conditions and you could lose control of the vehicle as a result of the seat moving. You could therefore cause an accident. Press (1) to lower or (2) to raise the position of the lumbar support. Press (3) to inflate or (4) to deflate the selected lumbar support. Set the seat, mirrors, and steering wheel to the desired positions; see Electric seats, page 1.32, Electric steering wheel adjustment, page 1.38 and Exterior mirrors, page 1.51. Press and hold the memory set button (1) and then simultaneously press any of the memory position buttons (2) to store the setting. 1.34 Press the button (2) where the required setting is stored, and hold until the seat and mirrors have completed their adjustment. Mclaren P11 - Complete.book Page 35 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE SEATS Comfort entry/exit WARNING: Ensure that no one can become trapped as the seat moves. When comfort entry/exit is active, the driver's seat will move fully rearwards and to its lowest position when the engine is off and the driver's door is opened. This assists exit from the vehicle. To switch the feature on or off, see Comfort Entry/Exit, page 3.15. Use the seat, mirror and if fitted, electric steering wheel, memory recall feature to return the seat to your preferred position. If no seat positions are stored in memory, readjust the seat using the controls. Seat memory - Stalk return After using comfort entry/exit, you can return the driver’s seat to its most recent position using the control stalk on the left of the steering column. The function will only be available when “To Return Seat, Pull left Stalk or Press OK to Clear” is displayed on the left-hand display. The vehicle must be awake with ignition off, the driver’s door closed, and comfort entry/exit ON. 1. Pull the control stalk towards you once to initiate the comfort entry function. 2. If at any point you wish to cancel the function, operate the control stalk or open the driver’s door. A message “Seat Returning, Operate Stalk or Open Door to Cancel” will appear in the left-hand display. NOTE: This function will only return the seat to the position it was in prior to the comfort entry/exit function being used. It will not use any of the seat memory positions, unless the previous position was one of the stored seat memory positions. NOTE: Cancel the comfort entry/entry function by starting the engine, or by pressing the seat switch pack while the seat is returning to position. 4. If the comfort entry/entry function is canceled, it will not be possible to return the seat to its previous position using this function. The message in the lefthand display will disappear and the control stalk will return to its normal use. The function will be available when comfort entry/exit is next used. 5. Once the seat has returned to its previous position, the message in the left-hand display will disappear and an audible alert will confirm that the seat return has been completed. 3. If the seat is manually adjusted before the stalk is used, the function will be lost and will not be available until the next time comfort entry/exit function is used. 1.35 Mclaren P11 - Complete.book Page 36 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE SEATS Heated seats WARNING: To avoid the risk of injury, constantly monitor the seat temperature. WARNING: The heated seats will not switch off automatically once it reaches its optimum temperature dependent on the level selected. Please ensure the switch of the heated seat function is turned off once the desired heat/period of heat has been achieved. Press button (1) once to switch seat heating to the low temperature setting, the button illuminates amber. Press again to switch to the high temperature setting, the button illuminates red. Press button (1) again to switch seat heating off. The seat heater will remain in operation until switched off. 1.36 Mclaren P11 - Complete.book Page 37 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE STEERING WHEEL AND STEERING COLUMN STEERING WHEEL AND STEERING COLUMN Manual steering wheel adjustment WARNING: Only adjust the steering wheel when the vehicle is stationary. You may not be able to observe road and traffic conditions safely. This could lead to you losing control of the vehicle which may result in an accident. The steering wheel can be adjusted for height and reach. • your arms are slightly bent when you hold the wheel • you can move your legs freely • you can see all the displays in the instrument cluster clearly Pull the lever to secure the steering wheel. Ensure the lever is locked before driving. Push the lever (highlighted) downwards and position the steering wheel so that: 1.37 Mclaren P11 - Complete.book Page 38 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE STEERING WHEEL AND STEERING COLUMN Electric steering wheel adjustment WARNING: Only adjust the steering wheel when the vehicle is stationary. You may not be able to observe road and traffic conditions safely. This could lead to you losing control of the vehicle which may result in an accident. NOTE: The column control switch will only adjust the steering wheel in one direction at a time. Using the column control switch, position the steering wheel so that: • your arms are slightly bent when you hold the wheel The steering wheel position may be adjusted for height and reach using the column control switch when the vehicle is in any awake status, see Vehicle electrical status, page 2.3. The column control switch is located on the left-hand side of the steering column. • you can move your legs freely • you can see all the displays in the instrument cluster clearly 1. 2. 3. 4. Height: Raise Height: Lower Reach: Away Reach: Towards Moving the column control switch in directions 1 & 2 adjusts the steering wheel height, raising or lowering the wheel’s position. Moving the column control switch in directions 3 & 4 adjusts the steering wheel reach, moving it closer or further away. 1.38 Automatic steering wheel adjustment If your vehicle is equipped with electric seats, the electric steering wheel position is stored when the seat and mirror positions are stored. See “Storing a seat and mirror position” on page 34. WARNING: Ensure that your hands are kept clear of the wheel and column as the steering wheel moves. NOTE: Any automatic movement can be canceled with any input from the column control switch. Mclaren P11 - Complete.book Page 39 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE STEERING WHEEL AND STEERING COLUMN Horn Comfort entry/exit When comfort entry/exit is active, the steering wheel and column will move fully forward (away from the driver) and to its highest position when the engine is off and the driver's door is opened. Press the center of the steering wheel to operate the horn. NOTE: The horn can be operated when the ignition is switched off. You can return the steering wheel and column to its most recent position using the control stalk on the left of the steering column. See “Comfort entry/exit” on page 35. WARNING: Ensure that your hands are kept clear of the wheel and column as the steering wheel moves. NOTE: Any automatic movement can be canceled with any input from the column control switch. 1.39 Mclaren P11 - Complete.book Page 40 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY OCCUPANT SAFETY Seat belts Seat belts and child restraint systems are the most effective means of restraining vehicle occupants from impact forces, which, in turn, minimizes the danger of injury from interior impacts and the effects of whiplash. WARNING: A seat belt which is not worn, worn incorrectly, or has not been engaged fully in the seat belt buckle, cannot perform its intended function. To avoid injuries, ensure that all vehicle occupants wear their seat belt correctly at all times. Ensure that the belt: • is routed as low as possible across • • • • • 1.40 your pelvic area, i.e. across your hip joints and not across your abdomen fits closely is not twisted is routed across the middle of your shoulder lies flat across the mid point of the collar bone between the neck and shoulder fits closely across your pelvis by pulling the shoulder belt upwards Do not secure any objects with a seat belt if the seat belt is being used by a vehicle occupant. the shoulder belt between the breasts and to the side of the abdomen. Ensure the belt is not slack or twisted. Avoid wearing bulky clothing. WARNING: The seat belt only provides its intended degree of protection if the seat backrest is positioned close to vertical, and the occupant is sitting upright. Do not route the belt across sharp edged or fragile objects especially if these are on or in your clothing The seat belt could be damaged and you could be injured. Only one person should use each seat belt at any one time. Never allow children to travel on the lap of another occupant. Children under 4 ft 5 in (1.35 meters) tall or younger than 12 years of age must be secured in a suitable child restraint. Follow the manufacturer's instructions when installing child restraint systems. WARNING: Pregnant women should wear a seat belt to ensure maximum safety of mother and unborn child. Position the lap belt across the hips, beneath the abdomen and position WARNING: The seat belt cannot perform its function correctly if the seat belt or buckle becomes excessively dirty or damaged. Ensure the belt latch engages the buckle fully. Check the seat belts regularly to ensure that they are not damaged, or routed over sharp edges and are not trapped. The belt could tear in an accident, causing injury to occupants. Have seat belts checked if the belts have been damaged or subjected to a heavy load. Work on the seat belts should only be carried out by your McLaren Retailer. Mclaren P11 - Complete.book Page 41 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY Wearing a seat belt 3. With the belt correctly positioned insert the latch into the buckle and press until a click is heard to confirm engagement. Check engagement by attempting to pull the latch from the buckle. Seat belt tensioners The seat belts incorporate belt tensioners. Belt tensioners apply tension to the seat belts in an accident, pulling them tight against the occupant. 1. Ensure that you are seated comfortably and the controls are within easy reach. 2. Grasp the seat belt latch and pull across the body, ensuring that the belt lies flat across the mid point of the collar bone between the neck and shoulder, then across the chest and pelvis. WARNING: Do not insert the belt latch into the passenger’s seat belt buckle if the passenger’s seat is unoccupied. The belt tensioners could be triggered in an accident. WARNING: Belt tensioners do not correct an incorrect seating position or incorrectly worn seat belts. Belt tensioners do not pull occupants back towards the backrests. The belt tensioner will be triggered for each seat belt, provided the belt latch is engaged in the seat belt buckle, if a head-on or rear-end collision occurs and the vehicle decelerates or accelerates rapidly. If the belt tensioners are triggered, a bang will be heard, a small amount of dust may be released and the Supplementary Restraint System warning light will illuminate. WARNING: Once triggered (or if you are unsure if they have triggered) you MUST not drive the vehicle. Contact your nearest McLaren Retailer immediately. Belt force limiters The seat belts incorporate belt force limiters. Belt force limiters are tuned to the front air bags and gradually release the tension being applied to the belts during an impact, thus reducing the force exerted on occupants. 1.41 Mclaren P11 - Complete.book Page 42 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY Supplementary Restraint System Seat belt warning light The seat belt warning light in the instrument cluster and a warning tone reminds vehicle occupants to fasten their seat belts. The seat belt warning light extinguishes and the warning tone ceases when the driver and passenger have fastened their seat belt. Air bag system Your McLaren is equipped with the following air bags: • driver's front air bag in the steering wheel WARNING: Air bags are not a substitute for correctly worn seat belts, they enhance the level of occupant protection offered by seat belts. • passenger’s front air bag in the dashboard • driver’s and passenger’s knee air bags • side head air bags in the doors WARNING: Correct operation of the air bags can only occur if the steering wheel, the passenger’s air bag cover, the knee air bag cover and the door trim are not covered. WARNING: Take note of all warning labels attached to the sun visors. 1.42 Mclaren P11 - Complete.book Page 43 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY WARNING: To reduce the risk of injuries in the event of an accident, observe the following points: • Ensure that the driver's chest is at • • • • • least 10 inches (25 centimeters) from the air bag cover. Do not lean forward over the dashboard while the vehicle is in motion. Do not rest your feet on the dashboard. Only hold the steering wheel by the outside of the rim. You could be injured if the air bag deploys and you are holding the inside of the steering wheel. Occupants, particularly children, must not lean on the doors from inside the vehicle. Ensure that there are no other objects between the vehicle occupants and the deployment area of the air bags. • Because of the high speed at which air bags deploy, there is a risk of injuries caused by an inflating air bag. Air bag replacement Air bag system modification If it is necessary to modify the air bag system to accommodate a person with disabilities, please contact McLaren Automotive Inc at: McLaren Automotive Inc. 750 3rd Avenue, Suite 2400 New York NY 10017 McLaren recommends that airbags are replaced every 15 years to prevent airbags from not firing due to component operating life. 1.43 Mclaren P11 - Complete.book Page 44 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY Front air bags NOTE: The passenger’s front air bag is only triggered if the PASSENGER AIR BAG OFF warning light on the overhead console is NOT illuminated, see Occupant classification system - front passenger’s seat, page 1.45. Side head air bags WARNING: To reduce the risk of injury to occupants if a side head air bag is triggered, ensure that: • there are no other objects between The driver's front air bag (1) deploys in front of the steering wheel and the passenger’s front air bag (2) deploys in front of and above the dashboard. The front air bags are deployed if the system determines they can offer additional protection for occupants against head and chest injuries. 1.44 the vehicle occupants and the deployment area of the air bags • no accessories are attached to the doors • no heavy or sharp objects are left in the pockets in clothing • occupants, particularly children, must not lean on the doors from inside the vehicle The side head air bags (left-hand highlighted) are located in the upper area of each door panel, and are deployed if the system determines they can offer additional protection for the head of the occupant on the side of the vehicle on which the impact occurs. NOTE: The passenger’s side head air bag is only deployed if the passenger’s seat is occupied. Mclaren P11 - Complete.book Page 45 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY Knee air bags WARNING: To reduce the risk of injury to occupants if a knee air bag is triggered, ensure that: • there are no other objects between the vehicle occupants and the deployment area of the air bags • no heavy or sharp objects are left in the pockets in clothing offer additional protection for the knees and lower body of the occupant on the side of the vehicle on which the impact occurs. NOTE: The passenger’s knee air bag is only deployed if the passenger’s seat is occupied. Occupant classification system - front passenger’s seat The system can determine if the passenger’s seat is occupied using a capacitance mat fitted in the seat base, and by checking the seat belt buckle engagement on the passenger’s seat belt. The passenger’s front air bag will not be active unless a specific weight is exceeded. This allows child restraint systems to be used on the passenger’s seat. The status of the air bags is indicated by the PASSENGER AIR BAG OFF warning light on the overhead console. The PASSENGER AIR BAG OFF warning light illuminates when the ignition is switched on and extinguishes after 5 seconds. The warning light will remain illuminated if the passenger’s seat is unoccupied or if a child seat is fitted. The knee air bags (highlighted) are located in the lower area of the dash board, and are deployed if the system determines they can NOTE: The PASSENGER AIR BAG OFF warning light is always illuminated unless the specific weight is exceeded. 1.45 Mclaren P11 - Complete.book Page 46 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY If the PASSENGER AIR BAG OFF warning light is illuminated, the passenger’s front air bag is not active. The side head air bag and the belt tensioner on the passenger’s side remain active even if the PASSENGER AIR BAG OFF warning light is illuminated. WARNING: If the PASSENGER AIR BAG OFF warning light is not illuminated when the child seat is fitted, the passenger’s air bag is not deactivated. The child could be seriously injured if the passenger’s air bag inflates. WARNING: To ensure that the occupant classification system functions correctly, never place objects under the seat. Also never apply additional material such as a blanket, cushion, or aftermarket equipment such as a seat cover, heater, or massager. These items can seriously affect how well the occupant classification system operates. McLaren recommends that 1.46 aftermarket equipment such as covers, heaters, and massagers are NOT used. WARNING: Any electronic devices that are either active or connected to the 12V accessory socket should not be placed on the passenger’s seat. They can affect how the occupant classification system operates. WARNING: The occupant classification system may become affected if any form of liquid (inclusive of rain) is spilled onto the passenger’s seat. If the PASSENGER AIR BAG OFF warning light is not illuminated when the seat is unoccupied, do not install a child restraint or allow anyone to occupy the seat. Please contact your nearest McLaren Retailer at your earliest convenience. WARNING: Do not place sharp objects onto the passenger’s seat. These may damage the occupant classification system if they puncture the seat cushion. WARNING: To ensure that the occupant classification system functions correctly, never place objects (e.g. a cushion) under the child restraint system. The entire base of the child restraint system must be in contact with the seat at all times. If a child restraint system is not fitted correctly it may not provide the intended degree of protection in the event of an accident and may cause injuries. Air bag deployment In the event of a collision the air bags are deployed by the Supplementary Restraints System to protect the vehicle occupants. The system can control the number of airbags deployed and partially or fully inflate the Mclaren P11 - Complete.book Page 47 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY airbags depending on the severity of the collision to provide the best possible protection to the vehicle occupants. The system uses sensors to rapidly evaluate the collision severity, the number of vehicle occupants, each occupants weight, their physical size and their seated position in relation to their airbags. Once all these factors are known the system will then deploy the necessary airbags and regulate the inflation pressure in the impact zone to ensure the occupants safety. After an accident the air bags begin to depressurise almost immediately after the inflation process has taken place. The gas used to inflate the airbags escapes through vents in the airbag and this helps reduce the occurrence of major impact injuries to the occupants. An airbag slows down and restricts the movement of the vehicle occupant reducing the load on the body, but is not a substitute for a correctly worn seat belt. WARNING: If the air bags are deployed, a bang will be heard and a small amount of fine powder may be released. The noise will not damage your hearing and the powder does not constitute a health hazard nor does it imply that a fire has broken out. This powder could cause short term breathing difficulties for persons suffering from asthma or other respiratory conditions. To prevent breathing difficulties, leave the vehicle as soon as possible or open a window. Supplementary Restraint System warning light The Supplementary Restraint System performs a self-test at regular intervals when the ignition is switched on and the engine is running. WARNING: After an air bag has been triggered, air bag parts are hot, do not touch them. Have the air bags replaced at your McLaren Retailer. • the warning light does not illuminate Out Of Position (OOP) The airbag system in your McLaren has been tested for the correct small child Out Of Position (OOP) operation. OOP can occur if a small child is incorrectly positioned in the passenger’s seat in the event of a collision in which the airbags are deployed. The warning light in the instrument cluster illuminates when the ignition is switched on and extinguishes 5 seconds after the engine is started. WARNING: Contact your McLaren retailer immediately should any of the following occur: when you switch on the ignition • the light does not extinguish 5 seconds after the engine is running • the light illuminates again, after the engine has started 1.47 Mclaren P11 - Complete.book Page 48 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY Child passengers Safety features If you are unfortunate enough to be involved in an accident the following events will occur to assist you and any recovery personnel: • the doors will unlock • the hazard warning lights will switch on • the interior lighting will switch on In some instances, the fuel system will also be switched off. WARNING: Do not leave children unsupervised in the vehicle even if they are secured in a child restraint. Children could injure themselves on parts of the vehicle, open a door and be seriously or even fatally harmed by prolonged exposure to heat or cold. If children open a door, they could cause injury to others in doing so or get out of the vehicle and possibly injure themselves or they could be injured by a passing vehicle. Do not expose the child restraint system to direct sunlight. The metal parts of the child restraint system could burn the child. Do not carry heavy or hard objects inside the vehicle unless they are secured. An unsecured or incorrectly positioned load increases the risk of injury to the child during sharp braking, a sudden change of direction or an accident. 1.48 Child restraint system McLaren Automotive does not recommend the use of child seats in this vehicle, but if you choose to do so, please follow the below guidelines: Secure any child under 4 ft 5 in (1.35 meters) tall or younger than 12 years of age traveling in the vehicle in an appropriate category restraint according to their weight. Contact your McLaren Retailer for advice. Category Weight Category 0 Up to 22 lbs (10 kg) Category 0+s Up to 29 lbs (13 kg) Category I 20 lbs to 40 lbs (9 to 18 kg) Category II 33 lbs to 55 lbs (15 to 25 kg) Category III 49 lbs to 79 lbs (22 to 36 kg) Please refer to current national and state laws for specific requirements. Mclaren P11 - Complete.book Page 49 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY is fully rearwards and is positioned at the lowest height. A manual passenger’s seat does not have height adjustment. WARNING: If the child restraint system has not been fitted correctly, the child cannot be restrained in an accident or sudden braking and could be injured. When fitting a child restraint system, observe the manufacturer's instructions on the correct use of the child restraint. WARNING: Never secure a rearward facing child restraint system on the passenger’s seat if the passenger’s front air bag is active. The status is indicated by the PASSENGER AIR BAG OFF indicator. WARNING: If the PASSENGER AIR BAG OFF indicator does not illuminate, do not use a rearward facing child restraint system on the passenger seat. You may use a forward-facing child restraint system on the passenger’s seat. The warning label on the passenger’s side is there to remind you of this. WARNING: If a forward facing child seat is fitted to the passenger’s seat, make sure that the passenger’s seat KISI child restraint function Your McLaren is fitted with a KISI system which is an automatic locking seat belt on the passenger’s side designed to temporarily lock the seat belt to securely hold the child restraint in the passenger’s seat. 1. Extend the passenger’s seat belt fully. The KISI system only engages when the seat belt is fully extended. NOTE: If the vehicle is parked on a hill the inertia lock may stop the seat belt extending. If this occurs, release the seat 1.49 Mclaren P11 - Complete.book Page 50 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE OCCUPANT SAFETY belt slightly and continue to extend the seat belt carefully to avoid the engagement of the inertia lock. 2. Pass the seat belt through the child restraint as described by the child restraint manufacturer and engage the belt latch in the buckle. 3. Adjust the belt so that the lower section is tight against the restraint and allow the upper section to retract. The KISI system will click as the belt retracts. 4. When the seat belt has retracted as far as possible, pull on the upper section to check that the seat belt has locked. NOTE: The KISI system will disengage when the seat belt has fully retracted and can then be worn as a normal seat belt. Once the KISI system has unlocked, it will be necessary to fully extend the seat belt to engage the KISI system the next time a child restraint is used. 1.50 Tether strap anchorages WARNING: Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses or for attaching other items or equipment to the vehicle. WARNING: When fitting a child restraint, always pass the upper tether strap over the top of the seat back. Always ensure that if an upper tether is provided, it is secured and tightened fully, as this provides maximum protection for a child. An upper tether anchorage is provided on the passenger’s seat. Install the child seat and pass the upper tether strap over the top of the seat back, secure it to the anchorage and tighten fully. Once the child restraint is installed, test the security of the installation, before seating a child. Attempt to twist the child seat from side to side and to pull it away from the vehicle seat, to check it is securely in place. Mclaren P11 - Complete.book Page 51 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE MIRRORS MIRRORS Safety WARNING: Before driving, adjust all mirrors to give the best possible view of road and traffic conditions. Interior mirror Adjust the interior mirror to get a good view of the road and traffic conditions. Move the lever on the bottom of the mirror to avoid being dazzled by lights from vehicles behind. Exterior mirrors WARNING: In some markets, the exterior mirrors have convex glass fitted. This type of mirror enlarges the field of vision, but reduces the size of the image. This means that objects are closer than they appear. To avoid misjudging the distance to vehicles traveling behind and perhaps causing an accident, check the actual distance of the vehicle, before changing direction. The exterior mirrors control is located on the dashboard between the steering wheel and the center console. 1.51 Mclaren P11 - Complete.book Page 52 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE MIRRORS Adjusting mirrors 1. Switch the ignition on. Exterior mirror fold 1. Switch the ignition on. 2. Rotate the control to position (3) to fold the mirrors. 3. To unfold the mirrors rotate the control away from position (3). NOTE: If the switch remains in position (3) the mirrors will be folded until the switch is moved. 2. Rotate the control to the left (1) to adjust the left-hand mirror or to the right (2) to adjust the right-hand mirror. 3. Move the control up, down left and right to adjust the mirror to the desired position. 1.52 Exterior mirror automatic fold The exterior mirrors can be set so that they fold automatically when the vehicle is locked. Unfolding occurs as a door is opened, not when the vehicle is unlocked. See Auto Fold Mirrors, page 3.14. Mirror dipping in reverse The exterior mirrors can be set to dip when reverse is engaged. This provides a view of the ground to the rear of the vehicle. See Reverse Mirror Dip, page 3.15. Heated mirrors Exterior mirrors are heated when the rear window heater is in operation, and the engine is running. They are also heated when the ambient temperature is below 41°F (5°C). NOTE: Mirrors on the 675LT are only heated when the ambient temperature is below 41°F (5°C). Mclaren P11 - Complete.book Page 53 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE LIGHTING LIGHTING Exterior lighting - except 675LT 1. Headlamp hi beam 2. Headlamp lo beam 3. Turn signal/Daytime running lamp/Sidelamp 4. Side turn signal 5. Side Marker 1. 2. 3. 4. 5. 6. 7. Turn signal Central high mounted stop lamp License plate lamp Tail lamp and stop lamp Side marker Reflector Reverse lamp and rear fog lamp 1.53 Mclaren P11 - Complete.book Page 54 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE LIGHTING Exterior lighting - 675LT 1. Headlamp hi beam 2. Headlamp lo beam 3. Turn signal/Daytime running lamp/Sidelamp 4. Side turn signal 5. Side Marker 1.54 1. 2. 3. 4. 5. 6. 7. Turn signal Central high mounted stop lamp License plate lamp Tail lamp and stop lamp Side marker Reflector Reverse lamp and fog lamp Mclaren P11 - Complete.book Page 55 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE LIGHTING Light switch WARNING: The lights do not switch on automatically in foggy conditions. Rotate the control to position (A) for automatic light control. Automatic light control is only an aid, you are responsible for the vehicle's lighting at all times. Rotate the control to position (1) for sidelamps or position (2) for headlamps. The side lamp or headlamp warning light illuminates in the instrument cluster. The light switch is located between the steering wheel and the driver’s door and has the following positions. irrespective of ambient light conditions. When the rear fog lamps are switched off, the lo beam headlamps will also switch off dependant on ambient light conditions. NOTE: A warning tone sounds if the driver's door is opened while the sidelamps or headlamps are switched on. Automatic light control The sidelamps and lo beam headlamps are switched on automatically when ambient light falls below a predetermined level. To switch on automatic light control, turn the light switch to position (A). At position (0), the lights are off with the exception of daytime running lamps. NOTE: If the vehicle detects rain whilst the light switch is set to position (A) the lo beam headlamps will switch on automatically, regardless of current external light levels. NOTE: With the light switch in position (A) and the fog lights switched on, the lo beam headlamps will also switch on 1.55 Mclaren P11 - Complete.book Page 56 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE LIGHTING Hi beam headlamps Sidelamps The sidelamps and the daytime running lamps are a combined series of Light Emitting Diodes (LEDs) located around the outside of the headlamp. The sidelamps operate at a lower intensity than the daytime running lamps, see Daytime running lamps, page 1.57. Headlamp flash Pull the stalk fully towards you. The hi beam headlamps operate for as long as the stalk is held. The hi beam headlamps warning light illuminates in the instrument cluster. The sidelamps, tail lamps and license plate lamps illuminate when the light switch is turned to position (1). The sidelamps warning light in the instrument cluster illuminates. Lo beam headlamps To switch on the headlamps, turn the light switch to (2). The headlamps warning light in the instrument cluster illuminates. NOTE: On your McLaren, the same headlight lo beam setting applies for driving on either the left-hand or right-hand side of the road. 1.56 To switch to hi beams, push the stalk away from you. The hi beam headlamps warning light illuminates in the instrument cluster. Pull the stalk towards you, to revert to lo beams. Mclaren P11 - Complete.book Page 57 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE LIGHTING Daytime running lamps Your McLaren is fitted with daytime running lamps which illuminate automatically when the ignition is switched on even if all lights are switched off. The sidelamps and the daytime running lamps are a combined series of Light Emitting Diodes located around the outside of the lo beam headlamp. The daytime running lamps operate at a higher intensity than the sidelamps. Rear fog lamp NOTE: The rear fog lamp only operates when lo beam headlamps are on. Ensure that the lo beam headlamps are switched on or the light switch is in position (A). NOTE: With the light switch in position (A) and the rear fog lights switched on, the lo beam headlamps will also switch on irrespective of ambient light conditions. When the rear fog lamps are switched off, the lo beam headlamps will also switch off dependant on ambient light conditions. Press the fog light button in the center of the light switch. The warning light in the instrument cluster and the light in the switch both illuminate. 1.57 Mclaren P11 - Complete.book Page 58 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE LIGHTING Turn signals Hazard warning lamps Turn Signals - lane change Move the turn signal/hi beam stalk until resistance is felt when changing lanes on a motorway. The appropriate turn signal flashes three times. For further information about the lighting see Light switch, page 1.55. The hazard warning lamps operate even if the ignition is switched off. As a safety feature, they switch on automatically when an air bag is triggered. Operating the hazard warning lamps Push the turn signal/hi beam stalk downwards (1) to switch on the left-hand turn signal. Push the turn signal/hi beam stalk upwards (2) to switch on the right-hand turn signal. The corresponding warning light in the instrument cluster will flash. The stalk returns to its rest position as the steering wheel returns to its central position. 1.58 1. Press the hazard warning lamps button. 2. All the turn signal lamps and both turn signal warning lights in the instrument cluster flash. 3. Press the hazard warning lamps button again to switch off. Mclaren P11 - Complete.book Page 59 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE LIGHTING Parking lights 2. To deactivate the parking lights, press the turn signal/hi beam stalk down for the left-hand side or push up for the right-hand side until resistance is felt. The selected parking lights will then be deactivated. NOTE: If the hazard warning lamps have been switched on automatically, press the hazard warning lamps button once to switch them off. Panic alarm The panic alarm function is designed to attract attention by sounding the horn and flashing the turn signal lamps repeatedly. NOTE: This will allow parking lights on both sides to be active at same time, and also allows one side to be deactivated, whilst keeping the opposite side activated. The panic alarm can be switched on by pressing the hazard warning lamps button for a period of 3 seconds or more. The horn will cease after the panic alarm has been active for a long period of time, but the turn signal lamps will continue to flash. The horn can be re-initiated by pressing the hazard warning lamps button for a period of 3 seconds or more. To switch the panic alarm off, press the hazard warning lamps button briefly. NOTE: The parking lights can only be activated when the ignition is switched off. 1. To activate the parking lights, press the turn signal/hi beam stalk down for the left-hand side or push up for the righthand side until resistance is felt. The selected parking lights will illuminate once the vehicle has been locked. 1.59 Mclaren P11 - Complete.book Page 60 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE WASHERS AND WIPER WASHERS AND WIPER Windscreen wiper Operating the windscreen wiper 1. Ensure the ignition is switched on. 2. Move the wiper stalk to the required position NOTE: If the windscreen wiper is switched on and the vehicle comes to a halt, the windscreen wiper automatically switches to intermittent wipe, until the vehicle moves away. 1. 2. 3. 4. Windscreen wiper off Automatic wipe Slow wipe Fast wipe NOTE: Switch off the windscreen wiper in dry weather, dirt can cause inadvertent wiper sweeps which could damage the wiper blade or windscreen. Automatic wipe A rain sensor, located on the windscreen behind the rear view mirror, measures the quantity of water on the screen and operates the wiper at the most appropriate speed. To select, move the windscreen wiper stalk to the automatic wipe position (2). The wiper will wipe once. The wipe frequency then depends on how wet the windscreen is. Only select the automatic wipe position in damp weather conditions or when it is raining. To adjust the sensitivity of the rain sensor, see Wiper Sensitivity, page 3.16. 1.60 Slow wipe Move the wiper stalk to position (3), to operate the wiper at slow speed. Return the stalk to position (1) to switch off. Fast wipe Move the wiper stalk to position (4), to operate the wiper at fast speed. Return the stalk to position (1) to switch off. Mclaren P11 - Complete.book Page 61 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE WASHERS AND WIPER Single wipe 1. For a slow single wipe, briefly push the wiper stalk and release. The wiper will operate once at slow speed, without washers. 2. For a fast single wipe, push and hold the wiper stalk down. The windscreen wiper will perform a continuous fast wipe until the stalk is released. Windscreen wash/wipe NOTE: The position of the washer jets are set during vehicle manufacture and should not need adjusting. If a problem occurs, consult your McLaren Retailer. Pull the wiper stalk towards you. The windscreen washers and wiper will operate at a slow speed for as long at the stalk is held. When the stalk is released, the wiper will complete its cycle and return to the parked position. After a period of time the wiper will operate once more to wipe any remaining washer fluid from the windscreen. 1.61 Mclaren P11 - Complete.book Page 62 Friday, January 22, 2016 9:43 AM BEFORE YOU DRIVE VEHICLE LIFT VEHICLE LIFT Vehicle Lift Operation Vehicle lift gives you the option to raise or lower the vehicle dependent on the current vehicle ride height. Ride height can only be raised when traveling at speeds below 31 mph (50 kph). The vehicle will automatically lower at speeds above 37 mph (60 kph). You obtain access to vehicle lift using the menu structure, see LEFT-HAND DISPLAY, page 3.3. NOTE: Vehicle handling modes are inhibited when vehicle lift is lowering or raising. Accessing the menu NOTE: Vehicle lift will be unavailable if launch mode is active. Hold the menu control stalk up for one second to quickly access the menu. A confirmation tone will be heard. NOTE: If the vehicle lift icon in the righthand display is amber, the system is not available. Do not drive the vehicle at high speed and contact your McLaren Retailer as soon as possible. Alternatively, access vehicle lift using the menu structure, see LEFT-HAND DISPLAY, page 3.3. The left-hand display will exit after the timeout duration has been exceeded back to home screen if there is no activity on the menu. To set the timeout to home screen duration, see Home screen, page 3.6. The vehicle suspension can be left fully raised for extended periods, but it may relax to a lower level over time. If the vehicle is left in a raised position for a long period, a system reset may occur when the engine is next started to return the vehicle to normal ride height. If vehicle lift is used when in motion, slight adjustments to the steering feel may be experienced, this is normal and does not affect the operation of the vehicle. 1.62 You can access the vehicle lift menu using the menu control stalk on the left of the steering column, whenever the engine is running. Mclaren P11 - Complete.book Page 63 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 64 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Vehicle electrical status ................................................................................ 2.3 Switching on the ignition ............................................................................. 2.4 Instruments and warning lights ................................................................. 2.4 Seamless shift gearbox gear positions.................................................... 2.7 Parking brake..................................................................................................... 2.9 Brake pedal...................................................................................................... 2.11 Starting/stopping the engine.................................................................. 2.11 Driving ............................................................................................................... 2.13 Exhaust Temperature Monitoring.......................................................... 2.15 Parking Sensors............................................................................................. 2.15 Rear View Camera (RVC)............................................................................. 2.16 SEAMLESS SHIFT GEARBOX Overview........................................................................................................... 2.19 Gear positions ................................................................................................ 2.19 Accelerator pedal position........................................................................ 2.20 Manual/Automatic mode.......................................................................... 2.20 HANDLING AND POWERTRAIN CONTROLS Active dynamics control ............................................................................ 2.24 Active button.................................................................................................. 2.25 Handling control ........................................................................................... 2.25 Powertrain control ....................................................................................... 2.27 Winter mode - except 675LT.................................................................... 2.29 Launch control .............................................................................................. 2.30 Spinning wheel pull away - 675LT.......................................................... 2.32 DRIVING SAFETY SYSTEMS General.............................................................................................................. Anti-lock Braking System .......................................................................... Brake assist system...................................................................................... Brake disc wiping .......................................................................................... Hill hold control............................................................................................. Brake-steer...................................................................................................... Electronic brake pre-fill.............................................................................. Electronic Stability Control (ESC)........................................................... ESC - except 675LT...................................................................................... ESC - 675LT..................................................................................................... Airbrake ............................................................................................................ Tire Pressure Monitoring System........................................................... 2.34 2.34 2.35 2.35 2.36 2.36 2.36 2.37 2.38 2.40 2.44 2.48 CRUISE CONTROL Overview .......................................................................................................... Using cruise control .................................................................................... Canceling cruise control............................................................................ Increasing cruise speed ............................................................................. Reducing cruise speed............................................................................... Resuming a stored speed.......................................................................... 2.51 2.51 2.52 2.53 2.53 2.54 ACTIVE SPEED LIMITER (ASL) Setting an upper speed limit.................................................................... 2.55 RUNNING IN Running in ....................................................................................................... 2.56 Normal/Road use......................................................................................... 2.56 Track use.......................................................................................................... 2.57 2.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS REFUELLING Filling with fuel ............................................................................................... 2.58 Recommended fuel ..................................................................................... 2.60 WINTER DRIVING Winter driving ................................................................................................. 2.61 2.2 Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING STARTING AND DRIVING Vehicle electrical status The vehicle will implement one of the following statuses according to the criteria detailed. NOTE: The engine can be started from any of the following states, except Locked. If the car is in Sleep mode, the START/STOP button will need to be pressed for more than two seconds. NOTE: If the vehicle detects the battery charge is getting too low, it will adopt the Awake status to conserve energy. Accessory and Ignition will be prohibited, but Crank will still be available. This is to allow the engine to be started so that battery recharging can commence. Locked Vehicle is locked in low power mode. Sleep Vehicle is unlocked in low power mode. Awake Door is opened or START/STOP button pressed, when the car is in Sleep mode. Ignition START/STOP button is pressed, when car is in Accessory mode. Time, odometer reading and battery status are available in the left-hand display. Fuel gauge operates in right-hand display. NOTE: There is no time out with ignition on. Be aware that the battery could become discharged. If there is no further activity after two minutes, the vehicle will return to the Sleep status. Crank See Starting/stopping the engine, page 2.11. Accessory START/STOP button is pressed, when car is in Awake mode. Windows and heater/air conditioning controls operate. IRIS and instrument cluster menus are available. If there is no further activity after 15 minutes, the vehicle will return to the Sleep status. Accessory mode can also be entered by pressing the OK button on the instrument cluster menu stalk. The key must be present within the cockpit area for this function to be available. 2.3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Switching on the ignition 1. Ensure that the key fob is inside the vehicle. 2. To switch on the ignition without starting the engine, press the START/STOP button, without depressing the brake pedal. NOTE: If the vehicle is in Awake mode, press the START/STOP button twice. 2.4 Instruments and warning lights 3. The ignition will switch on, the oil temperature, water temperature and fuel gauges will operate and several of the warning lights will illuminate as a self-test. The instrument cluster will fully illuminate. Warning lights can be divided into different categories, according to the color that they illuminate. • RED, AMBER or YELLOW - indicates that a fault has been detected. A fault indicated by a RED light is more important than one displayed in AMBER or YELLOW. • BLUE or GREEN - indicates that a system or feature is switched on and operating. Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Main instruments overview Left-hand display overview 1. Tachometer, page 3.2 2. Speedometer, page 3.2 Use the control stalk to navigate through the menus. The left-hand display provides vital information to the driver as well as the facility to personalize some vehicle settings. 2.5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Warning lights - left-hand side Right-hand display overview General warning - illuminates in conjunction with other warning lights Rear fog lamp, page 1.57 Sidelamps, page 1.56 Lo beam headlamps, page 1.56 Hi beam headlamps, page 1.56 Turn signals, page 1.58 Gearbox mode indicator, page 3.25 Electronic Stability Control (ESC), page 2.37 Electronic Stability Control (ESC), page 2.37 Brake warning light, page 2.11 Seat belt warning light, page 1.42 2.6 Messages - Coupe and Spider, page 3.26 1. 2. 3. 4. Oil temperature, page 3.34 Water temperature, page 3.35 Fuel level, page 3.35 Handling control, page 2.25 Powertrain control, page 2.27 Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Seamless shift gearbox gear positions Warning lights - right-hand side Tire Pressure Monitoring System operation, page 2.48 Parking brake status, page 2.10 Parking brake fault, page 2.10 Gear position indicator Gear Shift Indicator (GSI) Not available in all markets, consult your McLaren Retailer. Turn signals, page 1.58 Engine warning light, page 2.14 Supplementary Restraint System warning light, page 1.47 Anti-lock Braking System status light, page 2.35 The gearbox operates in either automatic or manual mode. Automatic mode is selected unless the driver chooses manual mode, see Manual/Automatic mode, page 2.20. If manual mode is active, gear changes are made using the gearshift paddles, see Gearshift paddles, page 2.22. NOTE: The letter on each button will illuminate red to identify if the vehicle is in Drive, Neutral or Reverse. 2.7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Drive All seven forward gears are available. Gear changes will be automatic, unless manual mode has been selected. With the exception of 675LT, when drive is selected and the brakes are released, the vehicle will begin to move slowly without any throttle use making it useful for parking maneuvers and for moving off in queuing traffic. Neutral No gear is engaged. Releasing the brakes will allow the vehicle to move freely, e.g. for pushing or towing. For more information on use of neutral for towing, see Towing for recovery, page 5.43. Reverse In normal circumstances, select reverse gear when the vehicle is stationary. When carrying out parking maneuvers that require rapid changes from drive to reverse and back again, it is possible to engage 2.8 reverse or drive at speeds up to 6mph (10 kph) whilst traveling in the opposite direction. Gearshift paddles NOTE: If reverse or drive is requested at speeds above 6 mph (10 kph), the transmission will engage neutral, as a self protection feature. Neutral can be selected at any speed by pressing the ‘N’ button. With the exception of 675LT, when reverse is selected and the brakes are released, the vehicle will begin to move slowly without any throttle use making it useful for parking maneuvers. To upshift, pull the right-hand paddle towards you. To downshift pull the left-hand paddle towards you. The current gear position appears in the gear position display, see Gear position indicator, page 3.33. NOTE: The single-piece paddle and central pivot enables upshifts and downshifts to be made using either paddle. Mclaren P11 - Complete.book Page 9 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Parking brake As an alternative, upshifts can be made by pushing the left-hand paddle away from you and downshifts can be made by pushing the right-hand paddle away from you. The gearshift paddles operate irrespective of the handling and powertrain program selected, and there is no need to release the accelerator pedal to change gear. will then go down through all gears sequentially until the optimum gear is reached or you release the paddle. When the vehicle speed is below 6 mph (10 kph) or the vehicle is stationary with a gear selected, select a downshift and hold the paddle to select neutral. WARNING: Do not place small items such as coins in the parking brake recess as this could inhibit the operation of the parking brake switch. NOTE: When parking on steep downhill slopes, turn the front wheels towards the kerb. When parking on steep uphill slopes, turn the front wheels away from the kerb. WARNING: For safety, in manual mode only, the vehicle will monitor engine speed and may perform an automatic gear change if necessary. WARNING: Do not change down for additional engine braking on a slippery surface. NOTE: If operating the paddles in automatic mode, the gearbox will revert to automatic changes if an eight second period elapses without a gear change being made. To immediately shift to the lowest possible gear whilst the vehicle is moving, select and hold a downshift on the paddle while applying sufficient brake pedal pressure. The vehicle 2.9 Mclaren P11 - Complete.book Page 10 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Parking brake status Pull the parking brake switch upwards to apply. The bar in the parking brake switch and the red parking brake applied status light in the instrument cluster illuminates. Parking brake operation • all doors are closed If the parking brake applied status light is flashing, the parking brake has failed to engage/disengage. To resolve, engage/disengage the parking brake again. The bar in the parking brake switch will always show the same state as the parking brake applied status light. Parking brake fault If there is a malfunction with the parking brake, the yellow parking brake malfunction status light in the instrument cluster illuminates and the bar in the parking brake switch flashes. Contact your McLaren Retailer as soon as possible. • driver’s seat belt is buckled NOTE: It is only possible to disengage the parking brake with the ignition on. The parking brake can be applied in all ignition states, including car asleep. Keep the brake pedal depressed, and press the parking brake switch downwards to disengage. The bar in the parking brake switch and the red parking brake applied status light in the instrument cluster extinguishes. WARNING: If the parking brake is manually released, the vehicle may start to move. 2.10 NOTE: If the parking brake is not manually released, it will automatically release as the vehicle is driven off forward, or in reverse as long as the following conditions are met: NOTE: In the event of total footbrake failure, the parking brake can be applied when the vehicle is moving to slow the vehicle. Mclaren P11 - Complete.book Page 11 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Brake pedal WARNING: Do not keep any objects in the driver's footwell. Ensure that floor mats or carpets are properly secured and do not obstruct the pedals. If objects become trapped between the pedals, you would not be able to brake or accelerate, and this could lead to an accident. WARNING: The braking system is servo assisted when the engine is running. The brakes will still function with the engine off, but more pressure will be required to operate them. WARNING: Do not rest your foot on the brake pedal while traveling as this may overheat the brakes, reduce their efficiency and cause excessive wear. Starting/stopping the engine Brake discs and pads WARNING: New brake pads require a period of bedding in. For the first 625 miles (1,000 km), avoid situations where heavy braking is required. Brake disc and pad wear depends on the driving style and driving conditions. Brake warning light The brake warning light will illuminate when the ignition is switched on as a system test. If the brake warning light illuminates at any other time, a fault is indicated. Stop the vehicle as soon as safety permits and contact your McLaren Retailer immediately. WARNING: Never run the engine when the vehicle is in an enclosed space. Exhaust fumes contain poisonous carbon monoxide. Breathing exhaust fumes could lead to unconsciousness and death. NOTE: Do not depress the accelerator pedal when starting the engine. The engine can be either started using manual cranking (except 675LT) or timed cranking. To change between the cranking functions of the START/STOP button, see Timed Crank, page 3.15. WARNING: If the brake warning light illuminates while the vehicle is in motion, stop the vehicle as soon as safety permits and contact your McLaren Retailer immediately. 2.11 Mclaren P11 - Complete.book Page 12 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Manual cranking - except 675LT 1. Ensure that the key fob is in the vehicle. Timed cranking 1. Ensure that the key fob is in the vehicle. Stopping the engine WARNING: The gearbox has no Park position to lock the gears. The parking brake is the only means of preventing the vehicle moving. NOTE: Do not depress the accelerator pedal when stopping the engine. Do not switch the engine off immediately after high speed/high load running. Allow it to run for 2 minutes so the engine temperature returns to normal. 2. Depress the brake pedal, and continuously press the START/STOP button, the engine will start. 3. Cranking can be stopped by either releasing the brake pedal, or releasing the START/STOP button. 2.12 2. Depress the brake pedal, press and release the START/STOP button and the engine will start. 3. If the START/STOP button is pressed again while the engine is cranking, cranking is stopped. NOTE: When parking on steep downhill slopes, turn the front wheels towards the kerb. When parking on steep uphill slopes, turn the front wheels away from the kerb. 1. Pull the parking brake switch upwards to apply. NOTE: If the parking brake is not applied manually, it will apply automatically when the engine is not running, and the driver’s door is open. Automatic Mclaren P11 - Complete.book Page 13 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Driving application can be overridden by holding the parking brake switch in the down position whilst opening the driver’s door. 2. Select neutral. NOTE: If the START/STOP button is pressed for more than a second, the vehicle will enter the Awake state for a brief time before returning to Accessory state if no further inputs are made, see Vehicle electrical status, page 2.3. Driving away WARNING: Never turn the engine off while driving, there will be no assistance for the steering or the foot brake. You will need more effort to steer and brake and could lose control of the vehicle and cause an accident. NOTE: Do not drive at high engine speeds until the engine has reached normal operating temperature. NOTE: The doors will lock when the vehicle reaches a speed of approximately 9 mph (15 kph). Auto lock can be set in the instrument cluster, see Auto Door Lock, page 3.14. 3. Press the START/STOP button. The engine stops, the vehicle enters the Accessory state, see Vehicle electrical status, page 2.3. The immobilizer is activated. ENVIRONMENTAL: When starting from cold, gear changes occur at higher engine speeds. The catalytic converter will reach its operating temperature quicker and reduce engine emissions. 1. With the engine running, press and hold the brake pedal. 2.13 Mclaren P11 - Complete.book Page 14 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING 2. Select drive or reverse gear, or initiate an upshift by operating the gearshift paddles. For more information, see Gearshift paddles, page 2.22 and Gear positions, page 2.19. 3. Keep the brake pedal depressed and release the parking brake switch. The red status light in the instrument cluster and the bar in the parking brake switch extinguish. WARNING: If the parking brake is manually released, the vehicle may start to move. NOTE: If the parking brake is not manually released, it will automatically release as the vehicle is driven off forward, or in reverse as long as the following conditions are met: • all doors are closed • driver’s seat belt is buckled 4. Carefully depress the accelerator pedal. Engine warning light This engine warning light illuminates when the ignition is on and extinguishes as soon as the engine is started, provided no faults exist. If the light illuminates while driving, an engine management fault has been detected and reduced engine performance may be experienced. Stop the vehicle as soon as safety permits and contact your McLaren Retailer immediately. Limphome mode Limphome mode activates automatically when vehicle systems detect a fault which may cause further damage unless vehicle or system performance is restricted. Care should be taken while driving in this mode. Contact your McLaren Retailer immediately. Economical driving Improved fuel economy can be achieved by following this advice. • Accelerate smoothly and gently from a standing start. 2.14 • When in manual mode, avoid high engine rpm by changing to a higher gear as soon as possible. The Gear Shift Indicator (GSI) will illuminate when an upshift would maintain optimum economy. NOTE: Not available in all markets, consult your McLaren Retailer. • Avoid laboring or over-revving the engine. • Switch off the air conditioning when it is not needed. • Avoid journeys where frequent stop start driving is involved. • Ensure that your driving style suits the prevailing road and traffic conditions; allow time for smooth, progressive acceleration and braking. • Use a reputable fuel economy tracking website to track your mileage and fuel usage. Mclaren P11 - Complete.book Page 15 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Exhaust Temperature Monitoring The vehicle continuously monitors exhaust temperatures to protect the catalytic converters from damage caused by overheating. If excessive exhaust temperatures are measured, a warning will be displayed on the left-hand side of the instrument cluster. The vehicle speed should be reduced as soon as this message is observed. Refrain from maneuvers involving high engine speed and high engine load (full throttle) to allow the exhausts to cool. The message will remain until the temperature has reduced. If the exhaust temperature remains at an excessive level, a second warning is displayed and Limphome mode is activated. The engine performance will remain limited until the vehicle is restarted. NOTE: Catalytic converter over temperature warnings are not likely to be observed during normal driving and are the result of extreme operating conditions. For example, high exhaust temperatures can be caused by extended track driving, maintaining high Parking Sensors engine speed for long durations, and sudden and repeated changes in throttle demand. NOTE: High exhaust temperatures can cause damage to catalytic converters and should be avoided by practicing careful driving. If the warnings persist, contact your McLaren Retailer. The parking sensors alert the driver to any obstructions while maneuvering at low speeds. The system comprises four ultrasonic sensors in the front bumper, four ultrasonic sensors in the rear bumper and two sounders. Each sounder has a different pitch to indicate whether the obstruction is at the front or the rear of the vehicle. The front parking sensors are automatically switched on when the ignition is switched on. The rear parking sensors are switched on when reverse gear is selected. The light 2.15 Mclaren P11 - Complete.book Page 16 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING Rear View Camera (RVC) around the parking sensors button will illuminate red to indicate that parking sensors are active. The center sensors on the front bumper have a range of approximately 3 feet (1 meter). The center sensors in the rear bumper have a range of approximately 5 feet (1.5 meters). An intermittent tone is heard when an obstruction is within range. As the vehicle moves closer to an obstruction, the frequency of the tone increases. When the distance between the sensors and the obstruction is less than approximately 1.5 feet (40 centimeters), the tone becomes continuous. WARNING: The parking sensors may not detect moving objects such as children and animals, until they are dangerously close. Always maneuver with caution and always use your mirrors turn your head and look behind you. 2.16 NOTE: The parking sensors are for guidance only and are not intended to replace the driver's visual checks for obstructions when maneuvering. The parking sensors may not detect some obstructions, such as narrow posts or small obstructions close to the ground such as kerbs. The rear parking sensors are automatically switched off when reverse gear is de-selected. The parking sensors can be switched off manually by pressing the center of the button, the light around the button will extinguish. When the system has been manually switched off, both the front and rear sensors will still switch on when reverse gear is selected and remain on until manually switched off again. If a fault is detected, a long high-pitched tone will sound. If the sensors are obscured by dirt, ice or snow, clean them. If the problem persists, contact your McLaren Retailer. The Rear View Camera (RVC) is mounted in the center of the rear grille. The live video feed is displayed on the IRIS screen when the function is active. NOTE: If the video feed is blurred or unclear, carefully clean the lens with water and a soft cloth. Mclaren P11 - Complete.book Page 17 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING The green static box extends back 6.6 feet (2 meters) from the rear of the vehicle, with an additional line at 3.3 feet (1 meter). The yellow dynamic box extends back 10 feet (3 meters) from the rear of the vehicle, with additional lines at 6.6 feet (2 meters) and 3.3 feet (1 meter). The yellow box will curve, in relation to steering angle, indicating the current path of the vehicle. A colored grid is overlaid onto the live video feed as a guide to the proximity of visible objects to the rear bumper of the vehicle. Each colored box starts at the rear of the vehicle and extends 10 inches (25 centimeters) beyond the widest point of the vehicle and extends back, away from the vehicle. The red static box extends back 1.5 feet (40 centimeters) from the rear of the vehicle. Following automatic activation, the RVC cannot be interrupted. Touching anywhere on the screen or pressing any of the physical IRIS buttons will have no effect. NOTE: The rear view camera is for guidance only and is not intended to replace the driver's visual checks for obstructions when maneuvering. The rear view camera may not show some obstructions in certain ambient light or weather conditions. NOTE: The steering guide grid will not be displayed if a steering angle fault exists. The RVC is automatically activated when reverse gear is selected and automatically deactivated 10 seconds after a forward gear is selected or immediately if the vehicle’s forward speed exceeds 6 mph (10 kph). The RVC can be manually activated by selecting REAR CAMERA from the IRIS SETTINGS menu. 2.17 Mclaren P11 - Complete.book Page 18 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS STARTING AND DRIVING When the RVC has been manually activated, it can be deactivated by touching the on-screen icon. The RVC will also be deactivated if the screen is touched anywhere below the status bar or any of the physical IRIS buttons are pressed. NOTE: The RVC cannot be manually deactivated if it has been automatically activated by selecting reverse gear. 2.18 Mclaren P11 - Complete.book Page 19 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS SEAMLESS SHIFT GEARBOX SEAMLESS SHIFT GEARBOX Overview Gear positions The gearbox is a 7-speed, dual clutch Seamless Shift Gearbox that can be operated in automatic or manual mode. throttle use making it useful for parking maneuvers and for moving off in queuing traffic. Automatic mode is selected unless the driver chooses manual mode, see Manual/Automatic mode, page 2.20. Neutral No gear is engaged. Releasing the brakes will allow the vehicle to move freely, e.g. for pushing or towing. For more information on use of neutral for towing, see Towing for recovery, page 5.43. In automatic mode, the gearbox automatically optimizes the shift points to suit your style of driving by selecting the most appropriate gear depending on: • Powertrain control, page 2.27 • Accelerator pedal position, page 2.20 • Vehicle speed • Braking effort NOTE: Allow the engine and gearbox to warm up before driving at high engine speeds and high loads. Avoid prolonged spinning of the rear wheels when driving on slippery surfaces as this could damage the drivetrain. Press one of the gear position buttons. NOTE: The letter on each button will illuminate red to identify if the vehicle is in Drive, Neutral or Reverse. Drive All seven forward gears are available. Gear changes will be automatic, unless manual mode has been selected. With the exception of 675LT, when drive is selected and the brakes are released, the vehicle will begin to move slowly without any Reverse In normal circumstances, select reverse gear when the vehicle is stationary. When carrying out parking maneuvers that require rapid changes from drive to reverse and back again, it is possible to engage reverse or drive at speeds up to 6mph (10 kph) whilst traveling in the opposite direction. NOTE: If reverse or drive is selected at speeds above 6 mph (10 kph), the transmission will engage neutral, as a self protection feature. Neutral can be selected at any speed by pressing the ‘N’ button. 2.19 Mclaren P11 - Complete.book Page 20 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS SEAMLESS SHIFT GEARBOX Accelerator pedal position With the exception of 675LT, when reverse is selected and the brakes are released, the vehicle will begin to move slowly without any throttle use making it useful for parking maneuvers. Manual/Automatic mode Your style of driving influences how the Seamless Shift Gearbox changes gear. With light accelerator pedal use, upshifts are made at lower engine speeds. With firmer accelerator pedal use, upshifts are made at higher engine speeds. Kickdown Kickdown is designed to achieve immediate acceleration. Depress the accelerator pedal fully beyond the pressure point, a click will be felt through the pedal. The gearbox will downshift immediately to the lowest appropriate gear, and maximum acceleration will follow. Once the pedal pressure is released, kickdown will cease and normal gear changes will resume. The gear (manual mode) or the gear position (automatic mode) selected will be shown in the instrument cluster. 2.20 NOTE: Moderate accelerator pedal pressure may also cause the gearbox to downshift, depending on vehicle speed. Press the ACTIVE button (1) to switch on the active dynamics panel. The halo around the ACTIVE button will come on. When selecting the different drive modes, their respective button will become illuminated. You can deactivate your drive mode selection at any time by pressing the ACTIVE button again. Press the MANUAL button (2) to select manual mode. Mclaren P11 - Complete.book Page 21 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS SEAMLESS SHIFT GEARBOX The gearbox mode indicator displays M. All forward gear changes are made by operating the gearshift paddles, see Gearshift paddles, page 2.22. When driving in manual mode, the gear position indicator will change from orange to red to indicate that an upshift is required to maintain optimum performance. NOTE: The 675LT also has an audible shift indicator, which will sound to indicate that an upshift is required to maintain optimum performance. For setting options see Performance Shift Cue (PSC) - 675LT, page 3.14. When in manual mode and driving more economically, the Gear Shift Indicator (GSI) will illuminate when an upshift would maintain optimum economy. The GSI will not illuminate if the requested acceleration or deceleration cannot be met with a higher gear. See Economical driving, page 2.14. NOTE: Not available in all markets, consult your McLaren Retailer. Press the MANUAL button again to revert to automatic mode. 2.21 Mclaren P11 - Complete.book Page 22 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS SEAMLESS SHIFT GEARBOX NOTE: As soon as an eight second period has elapsed without a manual gear change being made, the gearbox will revert to automatic mode. Gearshift paddles NOTE: The single-piece paddle and central pivot enables upshifts and downshifts to be made using either paddle. As an alternative, upshifts can be made by pushing the left-hand paddle away from you and downshifts can be made by pushing the right-hand paddle away from you. The gearshift paddles operate irrespective of the handling and powertrain program selected, and there is no need to release the accelerator pedal to change gear. The gearbox mode indicator displays A. All gear changes occur automatically, but if a gearshift paddle is operated the gearbox will adopt a temporary manual mode. This mode will remain active for as long as the driver continues to make manual gear changes, each within an eight second period. The gearbox mode indicator displays A/M, see Gearbox mode indicator, page 3.25. 2.22 WARNING: For safety, in manual mode only, the vehicle will monitor engine speed and may perform an automatic gear change if necessary. To upshift, pull the right-hand paddle towards you. To downshift pull the left-hand paddle towards you. The current gear position appears in the gear position display, see Gear position indicator, page 3.33. WARNING: Do not change down for additional engine braking on a slippery surface. NOTE: If operating the paddles in automatic mode, the gearbox will revert to automatic changes if an eight second period elapses without a gear change being made. Mclaren P11 - Complete.book Page 23 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS SEAMLESS SHIFT GEARBOX To immediately shift to the lowest possible gear whilst the vehicle is moving, select and hold a downshift on the paddle while applying sufficient brake pedal pressure. The vehicle will then go down through all gears sequentially until the optimum gear is reached or you release the paddle. When the vehicle speed is below 6 mph (10 kph) or the vehicle is stationary with a gear selected, select a downshift and hold the paddle to select neutral. Neutral can be selected at any speed by pressing the ‘N’ button. 2.23 Mclaren P11 - Complete.book Page 24 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS HANDLING AND POWERTRAIN CONTROLS Active dynamics control The handling and powertrain control switches, on the active dynamics panel, allow the driver to change the handling and performance characteristics of the vehicle. Except 675LT 675LT Active dynamics panel The active dynamics panel contains the following controls, and will only function with the engine running or the ignition switched on. 1. Winter mode - except 675LT, page 2.29 2. Active button, page 2.25 3. Handling control, page 2.25 AERO button, see Airbrake, page 2.44 4. STOP/START button, see Vehicle electrical status, page 2.3 5. Powertrain control, page 2.27 Manual/Automatic mode, page 2.20 6. Launch control, page 2.30 2.24 1. AERO button, see Airbrake, page 2.44 2. Active button, page 2.25 3. Handling control, page 2.25 Electronic Stability Control (ESC), page 2.37 4. STOP/START button, see Vehicle electrical status, page 2.3 5. Powertrain control, page 2.27 Manual/Automatic mode, page 2.20 6. Launch control, page 2.30 Mclaren P11 - Complete.book Page 25 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Active button Handling control operate the controls when the ignition is next switched on or the vehicle will revert to automatic gear changes. The handling control switch affects the following vehicle characteristics: • Roll stiffness • Adaptive damping • ESC settings • Steering response Selecting a setting Pressing the ACTIVE button activates the handling and powertrain controls. The ACTIVE button and handling and powertrain switches will illuminate. NOTE: When the ignition is switched off, the controls on the active dynamics panel will also switch off. The handling and powertrain control settings will be remembered but it will be necessary to press the ACTIVE button again to 1. Press the ACTIVE button to switch on the active dynamics panel. 2.25 section13.fm Page 26 Monday, January 25, 2016 8:31 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Settings N Normal Suspension at its softest setting, offers a compliant ride while maintaining good body control through corners. S Suspension is stiffer, giving a firmer ride coupled with enhanced handling characteristics. Active aerodynamics (Airbrake) becomes available to further enhance vehicle handling. Sport 2. Rotate the handling control to select one of the following settings. T 2.26 Track The suspension is at its stiffest, giving almost race car handling and ride characteristics. Active aerodynamics (Airbrake) becomes available to further enhance vehicle handling. The Electronic Stability Control warning light is permanently illuminated (except 675LT). The mode selected will remain active, until the selection is changed, or the ignition is switched off. NOTE: If all the following conditions are not met when the selection is made, the mode will not be implemented until they are met: • engine running with no fault conditions existing • no vehicle dynamic or stability interventions activated, e.g. Electronic Stability Control; • vehicle speed below 114 mph (190 kph) • steering wheel in straight ahead position, and not being turned, if the car is moving When the active dynamics panel is off, the Handling display in the right-hand display will show Normal, see Handling and powertrain display, page 3.33. Mclaren P11 - Complete.book Page 27 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Powertrain control NOTE: In Track handling mode, the Electronic Stability Control system is still in operation. For further information, see Electronic Stability Control (ESC), page 2.37. Selecting a setting Proactive chassis control The Proactive chassis control system features adjustable roll control using hydraulically interconnected dampers, in place of the typical mechanical anti-roll bars. Each handling mode adjusts the settings of the dampers to offer high levels of roll control, grip, traction and a unique combination of ride comfort and handling. 1. Press the ACTIVE button to switch on the active dynamics panel. 2. Rotate the powertrain control to select one of the following settings. 2.27 Mclaren P11 - Complete.book Page 28 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Settings N Normal Gear changes are configured to offer the optimum economy without sacrificing the vehicle's inherent performance. S Sport Gear changes will occur at a higher engine speed and with a reduced shift duration and are further enhanced with cylinder cut. See Cylinder cut, page 6.15. Track Gear change strategy is at its sharpest. Changes occur instantly, according to throttle response and are further enhanced with cylinder cut and inertia push. See Cylinder cut, page 6.15 and Inertia push, page 6.16. T The different gear change strategies outlined above are only relevant with automatic mode selected. 2.28 The mode selected will remain active, until the selection is changed, or the ignition is switched off. Economy mode When the active dynamics panel is off, the Powertrain display in the right-hand display will show Normal, see Handling and powertrain display, page 3.33. NOTE: The use of the Track setting on the public road is not recommended.The Track setting is strictly intended for high performance track/off road use only. When the vehicle is operating in any powertrain setting with automatic gear shifts selected, the transmission adapts to an economical shift strategy during periods of gentle driving. This is determined by the vehicle speed, acceleration, braking and road gradient. Mclaren P11 - Complete.book Page 29 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Winter mode - except 675LT Depending on the current active shift strategy, the word 'NORMAL', 'SPORT' or 'TRACK' changes color from white to green. For information on other ways to save fuel, see Economical driving, page 2.14. Selecting Winter mode 1. Press the ACTIVE button to switch on the active dynamics panel. 2. Press the WINTER button, the button will illuminate and WINTER will appear in the Powertrain and Handling display. 2.29 Mclaren P11 - Complete.book Page 30 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Launch control 3. Winter mode overrides both handling and powertrain controls. In winter mode, the roll stiffness, adaptive damping and Electronic Stability Control settings are changed to give the maximum assistance to the driver in slippery conditions. The engine speed, gearshift points and shift speed are also optimized for the slippery conditions. 4. For more information, see Winter driving, page 2.61. 5. To switch off, press the WINTER button again, alternatively switch off the ignition. Launch control is designed to offer the maximum acceleration from a standing start. WARNING: Do not initiate launch control unless on a track. Before initiating launch control, ensure that all doors, luggage compartment and engine cover are closed, and the prevailing conditions are suitable for performing maximum acceleration maneuvers. NOTE: Launch control can be operated in either automatic or manual mode and any handling or powertrain mode, but only when the active dynamics panel is activated. NOTE: The launch sequence can be aborted at any point by carrying out any of the following actions: • applying the parking brake • pressing the ACTIVE button to switch off the vehicle dynamics panel • or pressing the launch button to switch off launch control 2.30 NOTE: If there is a fault or the launch procedure has not been followed correctly, a warning message Launch mode unavailable - see Owners Manual will be shown in the left-hand display. Repeat the launch procedure, ensuring that it is followed correctly. If the warning message remains, contact your McLaren Retailer. NOTE: Launch mode is only available if the following conditions are met: • both doors are closed • the vehicle lift function is inactive • atmospheric pressure is sufficient for normal engine performance • winter mode not activated • engine coolant at normal operating temperature Mclaren P11 - Complete.book Page 31 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS NOTE: To abort launch control release the brake pedal before pressing the accelerator pedal or wait for approximately 60 seconds until launch control is deactivated. Launch control process 1. Ensure the steering wheel is in a straight ahead position. 2. Depress the brake pedal firmly with your left foot and select first gear. 4. Press the LAUNCH button. 3. Press the ACTIVE button to switch on the active dynamics panel. NOTE: L will flash in the gearbox mode indicator, see Manual/Automatic mode, page 2.20 and 'Launch Mode Active Awaiting Throttle' will be shown in the left-hand display. 5. With your left foot remaining on the brake pedal, press and hold the accelerator pedal down fully with your right foot, the engine speed will increase to 3,000 rpm. NOTE: The message 'Launch Mode Active - Boost Building' will be shown in the left-hand display. Once sufficient boost has been achieved, the message 'Launch Mode Active - Boost Ready' will be shown in the left-hand display. 6. Release the brake pedal with your left foot and the launch control system will perform a launch start to give maximum acceleration. NOTE: To abort launch control release the accelerator pedal or wait for approximately 5-10 seconds until launch control is deactivated. If the launch is aborted, release the accelerator pedal and then press again to drive away. 7. Launch control will operate if procedure has been followed correctly until aborted. 2.31 Mclaren P11 - Complete.book Page 32 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Spinning wheel pull away - 675LT NOTE: Whilst in launch control, the vehicle will carry out automatic gear shifts, and optimize traction. It will continue to do so until launch control is aborted. To abort launch control, release the accelerator pedal, apply the brake, or operate one of the gearshift paddles. For the driver who wishes to demonstrate maximum drama on pull away. WARNING: Do not initiate spinning wheel pull away unless on a track. Before initiating spinning wheel pull away, ensure that all doors, luggage compartment and engine cover are closed, and the prevailing conditions are suitable for performing dramatic acceleration maneuvers. WARNING: During spinning wheel pull away the Electronic Stability Control will be deactivated, resulting in loss of traction and spinning of the rear wheels. NOTE: Spinning wheel pull away can be operated in either automatic or manual mode and any powertrain mode, but only Sport or Track chassis modes. NOTE: Spinning wheel pull away can be aborted at any point by carrying out any of the following actions: • applying the brakes • releasing the accelerator pedal 2.32 NOTE: Spinning wheel pull away is only available if the following conditions are met: • engine coolant at normal operating temperature • atmospheric pressure is sufficient for normal engine performance • vehicle is stationary and on level ground • Electronic Stability Control is switched off See Electronic Stability Control (ESC), page 2.37 • launch control is inactive • first gear is selected • parking brake is disengaged • steering wheel should be in a straight ahead position to ensure greater control during pull away WARNING: If the steering wheel is not in a straight ahead position, extreme caution must be taken during pull away as there is an increased chance of spinning the vehicle. Mclaren P11 - Complete.book Page 33 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS HANDLING AND POWERTRAIN CONTROLS Spinning wheel pull away process 1. Depress the brake pedal to hold the vehicle stationary. 2. Release the brake pedal and then rapidly depress the accelerator pedal past the kickdown position. The vehicle will accelerate dramatically, spinning the rear wheels. NOTE: To abort spinning wheel pull away, release the accelerator pedal or depress the brake pedal. NOTE: During spinning wheel pull away in automatic mode, the vehicle will carry out automatic gear shifts, and continue spinning the rear wheels until the process is aborted or grip levels become too high to allow for wheel spin. If manual gear shifts are made, the wheels will continue to spin if optimum engine speed is maintained and grip levels allow. 2.33 Mclaren P11 - Complete.book Page 34 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS DRIVING SAFETY SYSTEMS General This section contains information about the following safety systems: • Anti-lock Braking System • Brake assist system • Brake disc wiping • Hill hold • Brake-steer • Electronic brake pre-fill • Electronic Stability Control • Airbrake WARNING: The risk of an accident increases when driving quickly, especially when cornering, on wet and icy roads. Always maintain a safe distance to the vehicle in front. The driving safety systems described in this section are unable to override the laws of physics. Always adapt your driving style to suit the road and weather conditions and maintain a sufficient distance from other road users and objects on the road. 2.34 Anti-lock Braking System NOTE: In winter conditions, the maximum effect of the Anti-lock Braking System, brake assist system and Electronic Stability Control can only be achieved if you use winter tires, with snow chains or snow socks where they are necessary. The Anti-lock Braking System prevents the wheels from locking when you brake. This allows the vehicle to be steered during braking maneuvers. The Anti-lock Braking System works from a speed of approximately 5 mph (8 kph) upwards, regardless of road surface conditions. It works on slippery surfaces, even when you brake gently. WARNING: Do not depress the brake pedal repeatedly in quick succession (pumping). Depress the brake pedal firmly and evenly. Pumping the brake pedal reduces the braking effect. If the Anti-lock Braking System operates during braking, the warning light flashes, and the brake pedal pulses as this happens. When the Anti-lock Braking System is activated, maintain the force on the brake pedal until the braking situation is over. WARNING: Always adapt your driving style to suit the prevailing road and weather conditions and maintain sufficient distance from other road users and objects on the road. Mclaren P11 - Complete.book Page 35 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Anti-lock Braking System status light If there is a malfunction with the system, the status light will illuminate. Do not drive your vehicle, contact your McLaren Retailer as soon as possible. WARNING: If the Anti-lock Braking System malfunctions, brake assist system and Electronic Stability Control are also deactivated. If the Anti-lock Braking System malfunctions, the wheels could lock when you brake. This may increase the stopping distance and impair your ability to steer. Brake assist system Brake disc wiping Brake assist system operates in emergency braking situations. If you depress the brake pedal quickly, the brake assist system automatically increases the force applied to the brakes and thus shortens the stopping distance. Brake disc wiping operates automatically when the windscreen wiper is switched on. It prevents moisture build up on the brake discs during periods of heavy rain, improving braking performance. Continue to depress the brake pedal firmly until the emergency situation is over, the Anti-lock Braking System prevents the wheels from locking. When you release the brake pedal, the brakes will work as normal. Brake assist system is deactivated. WARNING: If the brake assist system malfunctions, the brakes will still operate. However, the braking force is not automatically boosted and this may increase the stopping distance. 2.35 Mclaren P11 - Complete.book Page 36 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Hill hold control Brake-steer Electronic brake pre-fill If the brake pedal is applied to hold the vehicle on a hill, this function will continue to apply the brakes for two seconds after the pedal is released to assist a smooth start. Brake steer offers the benefits of a torque vectoring differential, but is integrated into the braking system reducing weight and providing excellent speed of response. If the accelerator pedal is suddenly released, the electronic brake pre-fill function immediately brings the brake pads into contact with the discs, ensuring rapid braking. Torque vectoring gives the differential the ability to change the amount of power that is sent to each of the rear wheels to provide optimum stability and traction. If the system detects that the car is starting to understeer through a corner, the inside rear brake is gently applied. This helps to increase the yaw rate of the car, making the car feel more resistant to understeer. The lateral ‘g’ force is also increased giving better handling characteristics. If the driver uses too much throttle exiting a corner, the inside rear wheel increases speed, which without brake steer could cause the car to become unstable. In this situation, brake steer will again gently apply the brake on the inside rear wheel, thereby restoring traction and stability. 2.36 Mclaren P11 - Complete.book Page 37 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Electronic Stability Control (ESC) Electronic stability control monitors driving stability and traction between the tires and the road surface. Electronic stability control detects when a wheel starts to spin or the vehicle starts to skid and stabilizes the vehicle by braking individual wheels, and/or limiting the engine power output. This also assists when pulling away on wet or slippery road surfaces and stabilizes the vehicle when braking. Electronic stability control operation is indicated by the warning light blinking on and off. NOTE: The electronic stability control warning light is permanently illuminated when Track mode is selected on the Handling Control. WARNING: If the electronic stability control warning light blinks on and off, do not deactivate Electronic Stability Control. Adapt your driving style to suit road and traffic conditions. Electronic stability control cannot reduce the risk of an accident if you drive too fast. Electronic stability control is unable to override the laws of physics. NOTE: Electronic stability control only functions properly if wheels with the recommended specification tires are used. WARNING: The traction control system cannot reduce the risk of an accident if you drive too fast. The traction control system is unable to override the laws of physics. See: ESC - except 675LT, page 2.38. See: ESC - 675LT, page 2.40. Electronic stability control is activated automatically as soon as the engine is running. Traction control system The traction control system is an integral part of Electronic Stability Control. The traction control system reduces engine torque to prevent the wheels from spinning. If additional intervention is required to stop the wheels from spinning, the vehicle will apply the rear brakes individually. The traction control system brakes individual drive wheels to prevent them from spinning. This means that the vehicle can accelerate on slippery surfaces. 2.37 Mclaren P11 - Complete.book Page 38 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS ESC - except 675LT Deactivating Electronic Stability Control WARNING: When Electronic Stability Control is deactivated, the risk of the vehicle skidding is increased. Adapt your driving style to suit road and traffic conditions. WARNING: Do not deactivate Electronic Stability Control unless on a track and prevailing conditions are suitable. Deactivation Procedure - except 675LT 1. Ensure the vehicle is stationary, with the engine running and the brake pedal depressed. 2. Track powertrain and handling modes should be selected, but the dynamics panel should not be switched on, see Handling control, page 2.25. NOTE: When you deactivate Electronic Stability Control, the following conditions result: 4. To confirm the selection, press and hold the AERO and MANUAL buttons together for 5 seconds. 5. The Electronic Stability Control OFF warning light will illuminate and a confirmation message will appear in the left-hand display. • the 'ESC OFF' warning light illuminates • the light on the ESC OFF button illuminates - 675LT • Electronic Stability Control no longer improves driving stability • the engine's torque is no longer limited and the drive wheels could spin • the anti-lock braking system remains activated 2.38 3. Press and hold the ACTIVE button on the active dynamics panel for 5 seconds, a warning message will be displayed in the left-hand display 'Confirm ESC Off'. Mclaren P11 - Complete.book Page 39 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Reactivating Electronic Stability Control When Electronic Stability Control is reactivated, the Electronic Stability Control OFF warning light in the instrument cluster extinguishes. Reactivation Procedure - except 675LT NOTE: Electronic Stability Control is automatically reactivated when the ignition is next switched off and on again. Perform any of the following to reactivate Electronic Stability Control: • Press the ACTIVE button on the active dynamics panel. • Change the setting on either the handling or powertrain control. • Switch on cruise control. • Switch the ignition off and then switch on again. 2.39 Mclaren P11 - Complete.book Page 40 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS ESC - 675LT Deactivating Electronic Stability Control WARNING: When Electronic Stability Control is deactivated, the risk of the vehicle skidding is increased. Adapt your driving style to suit road and traffic conditions. WARNING: Do not deactivate Electronic Stability Control unless on a track and prevailing conditions are suitable. NOTE: When you deactivate Electronic Stability Control, the following conditions result: • the 'ESC OFF' warning light illuminates • the light on the ESC OFF button illuminates - 675LT • Electronic Stability Control no longer improves driving stability • the engine's torque is no longer limited and the drive wheels could spin • the anti-lock braking system remains activated 2.40 Dynamic ESC Modes - 675LT The level of Electronic Stability Control can be adjusted to various dynamic modes to suit the driver’s requirements and is dependant on the handling mode currently active. Electronic Stability Control dynamic modes can be selected at any vehicle speed. Ensure Sport or Track handling mode is active, see Handling control, page 2.25. Sport dynamic mode 1. Select Sport handling mode. The Electronic Stability Control is ON by default. 2. Press the ESC OFF button briefly to activate Sport Dynamic mode which allows more dynamic freedom over the default ESC ON mode. ESC DYN will be displayed on the instrument cluster and the light on the ESC OFF button will illuminate. Track dynamic mode 1. Select Track handling mode. The Electronic Stability Control is ON by default, but allows slightly increased wheel slip during acceleration over the default ESC ON condition in Normal and Sport handling modes. Mclaren P11 - Complete.book Page 41 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS 2. Press the ESC OFF button briefly to activate Track Dynamic mode which allows a further increase in dynamic freedom over Sport Dynamic mode. ESC DYN will be displayed on the instrument cluster and the light on the ESC OFF button will illuminate. ESC Off 1. Select Sport or Track handling mode. 2. Press and hold the ESC OFF button for 2 seconds, followed by a confirmation press again within 5 seconds to deactivate the Electronic Stability Control. ESC OFF will be displayed on the instrument cluster and the light on the ESC OFF button will illuminate. 2.41 Mclaren P11 - Complete.book Page 42 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS ESC Modes Overview Sport handling mode Normal handling mode Instrument cluster message ESC mode ESC button Default (not pressed) ESC ON Normal Default (not pressed) ESC ON Normal Track Normal Short/single press ESC DYN Sport Dynamic Short/single press ESC DYN Track Dynamic Normal Press and hold (2 seconds, then release) Short press (to confirm within 5 seconds) ESC OFF Press and hold (2 seconds, then release) Short press (to confirm within 5 seconds) ESC OFF ESC OFF Instrument cluster message ESC mode ESC button Default (not pressed) ESC ON Normal Short/single press ESC ON ESC button Press and hold (2 seconds, then release) Short press (to confirm within 5 seconds) 2.42 ESC ON Track handling mode ESC OFF Instrument cluster message ESC mode Mclaren P11 - Complete.book Page 43 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Reactivating Electronic Stability Control When Electronic Stability Control is reactivated, the Electronic Stability Control OFF warning light in the instrument cluster extinguishes. Reactivation Procedure - 675LT NOTE: Electronic Stability Control is automatically reactivated when the ignition is next switched off and on again. Perform any of the following to reactivate Electronic Stability Control: • Press the ESC OFF button, the light on the button will extinguish. • Change the setting on the handling control to Normal. • Switch on cruise control. • Switch the ignition off and then switch on again. 2.43 Mclaren P11 - Complete.book Page 44 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Airbrake WARNING: The driver is responsible for ensuring that no persons, or any part of their body can be trapped during Airbrake movement. WARNING: If the Airbrake fails the self-test, a message will appear in the left-hand display. Contact your McLaren Retailer. The Airbrake is located at the rear of your McLaren and has three operating positions, as described below, and a self-test facility that initiates after every full ignition on/off cycle. NOTE: If the engine has been stopped with the Airbrake in the downforce position, the self-test procedure will be reversed, i.e. the Airbrake will lower fully then raise to the driver selected downforce position. NOTE: The Airbrake uses hydraulic pressure and will only operate with the engine running. NOTE: The Airbrake system is automatically deactivated at temperatures below 24°F (-4°C) or at engine speeds below 500 rpm. A warning message will appear on the instrument cluster if operation of the Airbrake is selected. The Airbrake system will become active when the ambient temperature rises above 24°F (-4°C). or engine speed rises above 500 rpm. 2.44 1. Normal driving position 2. Downforce position 3. Rapid braking position Self-test After each full ignition cycle, the first time the engine is started and at speeds above 9 mph (15 kph), the Airbrake self-tests, rising to the downforce position and then returning slowly to its initial position. Normal driving position mode This is the default position with the active dynamics panel switched off and is used for normal driving conditions. Downforce position In this position, the Airbrake is raised to increase rear downforce. This position enhances vehicle stability with increased aerodynamic drag. The Airbrake can be raised at any vehicle speed. Mclaren P11 - Complete.book Page 45 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS 1. Press the ACTIVE button to switch on the active dynamics panel. Except 675LT 675LT 2. Press the AERO button. The Airbrake rises and locks in the downforce position. NOTE: The Airbrake may automatically lower to reduce aerodynamic drag in favor of straight line speed if the vehicle is traveling in a straight line at full throttle. The Airbrake will not automatically lower when cornering or when launch control is active. 2.45 Mclaren P11 - Complete.book Page 46 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Lowering the Airbrake - vehicle moving If the car is traveling at speeds above 9 mph (15 kph), press the AERO button, and the Airbrake will lower to the normal driving position. WARNING: Before deactivating the downforce position, check the Airbrake for any objects which may obstruct movement, e.g. branches or leaves, and remove them or the Airbrake may no longer function correctly. The driver is responsible for ensuring no person or object can be trapped during Airbrake movement. NOTE: The Airbrake will only lower if the speed of the vehicle meets the following criteria: • When cornering, the vehicle speed must be between 9 mph (15 kph) and 75 mph (120 kph). • When traveling in a straight line, the vehicle speed must be between 9 mph (15 kph) and 155 mph (250 kph). • This is to reduce the risk of any object being trapped. 2.46 Lowering the Airbrake - vehicle stationary If the car is being parked and the Airbrake is still deployed, press and hold the AERO button for 5 seconds, and the Airbrake will start to lower. Keep the button pressed until the Airbrake is fully lowered, remaining alert to any potential obstructions. WARNING: Before lowering, check the Airbrake for any objects which may obstruct movement, e.g. branches or leaves, and remove them or the Airbrake may no longer function correctly. The driver is responsible for ensuring no person or object can be trapped during Airbrake movement. NOTE: If the AERO button is released before the Airbrake is fully retracted, it will return to the previously selected position. Rapid braking position During hard braking at speeds above 60 mph (95 kph), the Airbrake automatically rises to the fully deployed position to provide maximum braking assistance. Once the pressure on the brake pedal is released, the Airbrake will return to its previous position - either the driver’s selected downforce position or the normal driving position. NOTE: The Airbrake will lower just before the vehicle comes to a halt during hard braking. The Airbrake may actively deploy, even if the brake pedal is not depressed, to maintain vehicle stability under the following conditions: • When high longitudinal G forces are measured, for example. when the accelerator pedal is suddenly released. • When high vertical G forces are measured, for example. when traveling over the crest of a hill. Mclaren P11 - Complete.book Page 47 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS NOTE: The Airbrake will only actively deploy if Sport or Track handling mode is selected and launch control is not active. Manual test WARNING: When activated, the Airbrake will temporarily block the view through the interior mirror. In this case, monitor the traffic behind you through the exterior mirrors. 1. Press the ACTIVE button to switch on the active dynamics panel. 2. Press the AERO button. The Airbrake rises and locks in the downforce position. 3. Press and hold the AERO button to return the Airbrake to its rest position. 2.47 Mclaren P11 - Complete.book Page 48 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Tire Pressure Monitoring System Prior to every time the vehicle is to driven, each tire should be checked when cold and inflated/deflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper inflation pressure for those tires). In certain circumstances it is possible that the TPMS pressure warning will display without the loss of air from the tire. This may be due to temperature variations between the locations where the tire pressure was set and where the vehicle is driven. For example setting pressures in an air conditioned or heated garage and then driving the vehicle outside may induce a tire pressure warning after a short period of driving. The warning may also display when extreme ambient temperature variations occur or during seasonal temperature changes. 2.48 WARNING: Never ignore a tire pressure warning. Check tire pressures immediately and if necessary contact your McLaren retailer. Tire Pressure Monitoring System overview The system monitors the tire pressures and temperatures in each wheel using sensors located in each tire valve and a receiver located within the vehicle. Communication between the sensors and the receiver is via Radio Frequency (RF) signals. NOTE: The Tire Pressure Monitoring System can suffer interference if you are operating radio transmitting equipment (e.g. radio headphones, two-way radios) in or near the vehicle. Tire Pressure Monitoring System operation If a low tire pressure is detected, the Tire Pressure Monitoring System warning light will illuminate along with an associated error message in the left-hand display. The Tire Pressure Monitoring System warns you when the pressure drops or the temperature increases above an acceptable level in one or more of the tires. Stop the vehicle as soon as possible, check all your tires and inflate them to the recommended pressure, see Tire pressures, page 5.34. The warning light will extinguish once the tires have been inflated to the correct pressure. Mclaren P11 - Complete.book Page 49 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS manually checking tire pressures or checking for wear and damage. The system only provides a low tire pressure warning and does not reinflate the tires. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. The Tire Pressure Monitoring System cannot alert you to damage to a tire. Regularly check the condition of your tires. WARNING: TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire pressure warning light. Each tire should be checked weekly when cold and inflated/deflated to the inflation pressure recommended on the tire inflation pressure label. Navigate through the 'Vehicle Info' screen in the left-hand display to view the current tire pressures, see Vehicle info, page 3.17. The display shows the pressures of each of the four tires. If the pressure figure appears in green, no action is required. If it appears as red text, inflate the associated tire to the correct pressure as soon as possible. Inspect the tire(s) for any possible causes of reduced tire pressure. WARNING: The tire pressures indicated in the left-hand display will be more accurate with a pressure gauge. The Tire Pressure Monitoring System is not a substitute for WARNING: If low pressure warnings occur frequently, have the tires checked at your McLaren Retailer. Driving on an under-inflated tire will causes the tire to overheat and can lead to tire failure. ENVIRONMENTAL: Under-inflated tires reduce fuel efficiency and tire tread life, and may affect the vehicle’s handling and braking characteristics. ENVIRONMENTAL: Check tire pressures at least every 7 days. 2.49 Mclaren P11 - Complete.book Page 50 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS DRIVING SAFETY SYSTEMS Tire Temperature Monitoring System operation If a high tire temperature is detected, the Tire Temperature Monitoring System will display an error message in the left-hand display. Navigate through the 'Vehicle Info' screen in the left-hand display to view the current tire temperatures, see Vehicle info, page 3.17. This shows the current temperature of each of the four tires. If the temperature figure appears in green, no action is required. If it appears as red text, the safe operating 2.50 temperature of the tires has been exceeded. Reduce speed or stop the vehicle until the temperatures are at a safe level, i.e. temperatures are displayed in green. Inspect the tire(s) for any possible causes of increased tire temperature. Mclaren P11 - Complete.book Page 51 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS CRUISE CONTROL CRUISE CONTROL Overview Using cruise control WARNING: Pay particular attention to road and traffic conditions, when cruise control is activated, and always travel at a speed which is safe for the current conditions. Never use cruise control on winding or slippery roads or when visibility is poor, e.g. in fog, heavy rain or snow. Cruise control allows the driver to maintain a constant speed without using the accelerator pedal. This is useful on motorway journeys where a constant speed can be maintained for long periods. All cruise control functions are operated by the cruise control stalk, positioned on the right of the steering column. Accelerate to the desired speed and push the stalk up briefly, to activate cruise control. The set speed will appear in the right-hand display. NOTE: Cruise control will only operate at speeds in excess of 20 mph (30 kph). Speed can be increased at any time by pressing the accelerator pedal. Once the accelerator pedal is released the vehicle will return to the cruise speed. 2.51 Mclaren P11 - Complete.book Page 52 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS CRUISE CONTROL Canceling cruise control NOTE: Cruise control is canceled automatically if Electronic Stability Control detects wheel spin or vehicle skid or if Electronic Stability Control is switched off. WARNING: Always be aware that cruise is engaged and do not override cruise for extended periods. Releasing the accelerator in these circumstances could lead to the vehicle not decelerating at the rate you expect. Briefly press the cruise control stalk away from you. Cruise control is canceled. The indicator in the instrument cluster extinguishes but the last speed set remains stored. NOTE: The last speed stored is cleared when you switch off the engine. Cruise control is also canceled if the foot brake is pressed, if neutral is selected or if Active Speed Limiter is selected. 2.52 Mclaren P11 - Complete.book Page 53 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS CRUISE CONTROL Increasing cruise speed Reducing cruise speed NOTE: If you decelerate using the cruise control stalk, the gearbox may shift down to increase the rate of deceleration. Downshifting manually using the gear change paddles will not disengage cruise control. • A brief press of the stalk upwards will increase the vehicle speed in 1 mph (1 kph) increments (depending on the units selected, see Units, page 3.7); • or press and hold the stalk upwards until the desired speed is reached, then release the stalk; • or accelerate to the new desired speed and push the stalk up. • A brief press of the stalk downwards will decrease the vehicle speed in 1 mph (1 kph) decrements (depending on the units selected, see Units, page 3.7); • or press and hold the stalk downwards, the vehicle will decelerate, release the stalk when the desired speed has been reached. 2.53 Mclaren P11 - Complete.book Page 54 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS CRUISE CONTROL Resuming a stored speed WARNING: Only resume the stored speed if it is appropriate for the current road and traffic conditions. Sudden acceleration could endanger yourself and others. Pull the cruise control stalk briefly towards you. Cruise control will adjust the vehicle's speed to the last speed stored. 2.54 Mclaren P11 - Complete.book Page 55 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS ACTIVE SPEED LIMITER (ASL) ACTIVE SPEED LIMITER (ASL) Setting an upper speed limit WARNING: It is the driver's responsibility to keep within proper speed limits. WARNING: The ASL feature may allow the vehicle to exceed the upper speed limit in certain situations, for example when descending steep gradients. NOTE: ASL can be activated when the car is stationary. The upper speed limit will be set to a default speed of 20 mph (30 kph). The ASL control allows the driver to set an upper speed limit. 3. Push the stalk up briefly to select the desired ASL upper speed limit. 4. The upper speed limit appears in the right-hand display. Selecting a speed 1. Press the button on the end of the cruise control stalk, to select ASL mode. 2. Accelerate or decelerate the vehicle to the maximum permitted speed. 2.55 Mclaren P11 - Complete.book Page 56 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS RUNNING IN RUNNING IN Running in Observe the following running in instructions when the vehicle is new or if any of these components have been replaced. Engine and gearbox For the first 625 miles (1,000 km): • drive at varying road and engine speeds • do not drive faster than the maximum • • • • • • • • 2.56 speed limit of the road, or 150 mph (240 kph) do not use your vehicle on a race track; avoid heavy loads on the engine (driving at full throttle) avoid driving at engine speeds less than 2,000 rpm avoid running at constant speed and load for long periods avoid using kickdown do not downshift for additional engine braking avoid stopping the engine within 2 minutes of high speed and high load running avoid idling the engine for more than 10 minutes Normal/Road use After the 625 miles (1,000 km) running in period, you may gradually use the vehicle's full performance. NOTE: Failure to observe the engine and gearbox operating limits during the running in period may lead to premature wear or damage. NOTE: These running in instructions also apply for the first 625 miles (1,000 km) after the engine or transmission has been replaced. ENVIRONMENTAL: This advice will assist in improving fuel economy and should be adopted as normal driving practice even after the running in period. Brakes New brakes require an initial bedding in period. Avoid heavy braking situations for the first 625 miles (1,000 km). • Allow the engine to warm up before driving at high engine speeds and high loads. Limit engine speed to 5,000 rpm until the engine reaches full operating temperature. • Avoid stopping the engine within 2 minutes of high speed/high load running. • Avoid idling the engine for more than 10 minutes. Mclaren P11 - Complete.book Page 57 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS RUNNING IN Track use NOTE: Do not use the vehicle on a track during the running in period. Before you use your vehicle on the track, consult your McLaren Retailer. McLaren recommend that your vehicle is inspected before and after track use. 2.57 Mclaren P11 - Complete.book Page 58 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS REFUELLING REFUELLING Filling with fuel WARNING: Fuel is highly flammable. Fire, naked flames, smoking and using a cell phone are prohibited when handling fuels. Switch off the engine before refuelling. Filling at the gas station 1. Switch off the engine. WARNING: Fuel and fuel vapors can damage your health. Do not inhale fuel vapors or allow fuel to come into contact with skin or clothing. The fuel filler flap is located at the rear on the left-hand side. It is locked or unlocked automatically when the vehicle is locked or unlocked. NOTE: Do not attempt to force the filler flap open if the car is locked. You may damage the flap and its locking mechanism. NOTE: The fuel filler flap will remain locked if the engine is running. 2.58 2. Press the rear edge of the fuel filler flap, the latch will release. 3. Open the flap. NOTE: Your vehicle is not fitted with a fuel filler cap. 4. Insert the nozzle into the fuel filler and dispense fuel. For fuel recommendations, see Recommended fuel, page 2.60. 5. Do not continue to fill the tank after the pump nozzle switches off. 6. Remove the nozzle. 7. Close the fuel filler flap, you will hear the latch engage. Mclaren P11 - Complete.book Page 59 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS REFUELLING WARNING: Take care to avoid spillages and overfilling. Ensure any spillages are cleaned immediately. 8. Remove the nozzle. 9. Remove the fuel funnel, clean thoroughly and store in the luggage compartment. 10. Close the fuel filler flap, you will hear the latch engage. Filling with the fuel funnel NOTE: The fuel funnel should only be used when filling the fuel tank from sources other than a gas station fuel pump. 1. Switch off the engine. 2. Press the rear edge of the fuel filler flap, the latch will release. 3. Open the flap. 4. Collect the fuel funnel from the luggage compartment, see Fuel funnel, page 5.12. 5. Insert the fuel funnel fully into the filler neck. 6. Insert the nozzle into the fuel funnel and dispense fuel. For fuel recommendations, see Recommended fuel, page 2.60. 7. Do not overfill. NOTE: Your vehicle is not fitted with a fuel filler cap. 2.59 Mclaren P11 - Complete.book Page 60 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS REFUELLING Recommended fuel NOTE: Federal law requires that gasoline octane ratings can be posted on the pumps. The octane rating shown is an average of Research Octane Number (RON) and Motor Octane Number (MON) rating. For maximum engine performance the use of 94 AKI rated fuel is recommended. In areas where 94 AKI rated fuel is unavailable, use unleaded premium grade gasoline with a minimum octane rating specification. NOTE: Information relating to the quality of fuel being dispensed is displayed on the filling pump. NOTE: The likelihood of engine wear or damage is increased if fuel does not meet the requirements of EN 228 for unleaded gasoline or if fuel additives are used. Damage caused by use of incorrect fuel is not covered by the vehicle warranty. Do not use leaded fuel, doing so may damage the catalytic converter. 2.60 No use of methanol is allowed. In areas where 94 AKI rated fuel is unavailable, use unleaded premium grade gasoline with a minimum octane rating of 91 AKI. Fuel with an ethanol content up to E10 maximum is permitted. NOTE: This vehicle is not suitable for use with fuels containing more than 10% Ethanol. Do not use E85 fuels (85% Ethanol content). This vehicle is not fitted with the equipment necessary for the use of fuels containing more than 10% Ethanol. If E85 fuels are used, serious damage will occur to the engine and fuel system. NOTE: If the fuel tank is accidentally filled with the incorrect type of fuel, do not start the engine, and seek qualified assistance. Mclaren P11 - Complete.book Page 61 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS WINTER DRIVING WINTER DRIVING Winter driving It is recommended that you have your vehicle inspected at your McLaren Retailer at the onset of winter. This service includes the following: • checking the antifreeze/anti-corrosion concentration • adding concentrated cleaning agent to the windscreen cleaning system • checking the battery • changing the tires Select Winter mode (except 675LT) on the active dynamics panel, when conditions make it necessary, see Winter mode - except 675LT, page 2.29. Winter driving - 675LT Normal powertrain and handling modes should be used for winter driving. Dynamic ESC and ESC Off modes are not recommended for winter driving. Winter tires Use winter tires below 45°F (7°C) and on snow or ice-covered roads. The maximum effect of the Anti-lock Braking System and Electronic Stability Control systems is only achieved with these tires. Use winter tires of the same make and tread on all wheels to maintain safe handling characteristics. Change the tire type in 'Vehicle Settings' in the left-hand display, see Tire Type, page 3.17. NOTE: A wheel change must be carried out at your McLaren Retailer. The vehicle could be damaged if it is jacked up incorrectly. Consult your McLaren Retailer for advice and information regarding the maximum speed specified for the winter tires fitted. Restrict the maximum speed of the vehicle using the ASL system, see Setting an upper speed limit, page 2.55. Winter tires are directional, not asymmetrical, and so must be fitted in accordance with the directional markings on the sides of the tires. NOTE: Only winter tires specified by McLaren should be used. WARNING: Replace winter tires with a tread depth of less than 4 mm immediately. They are not suitable for winter use because they do not provide sufficient grip, and could cause an accident. 2.61 Mclaren P11 - Complete.book Page 62 Friday, January 22, 2016 9:43 AM DRIVING CONTROLS WINTER DRIVING Snow chains - except 675LT McLaren recommends that you only use snow chains which have been approved for McLaren vehicles. If you are intending to fit snow chains, bear the following points in mind: • Only ever fit snow chains to both rear wheels. • Comply with the manufacturer's installation instructions. NOTE: If snow chains are fitted on the front wheels, they may come into contact with the bodywork or axle components while the vehicle is being driven. As a result, the tire or the vehicle could be damaged. Do not exceed the maximum permissible speed of 30 mph (50 kph). Remove the snow chains as soon as possible if you are no longer driving on snow-covered roads. 2.62 Snow socks - 675LT McLaren recommends that you only use snow socks which have been approved for McLaren vehicles. If you are intending to fit snow socks, bear the following points in mind: • Only ever fit snow socks to both rear wheels. • Comply with the manufacturer's installation instructions. Do not exceed the maximum permissible speed displayed on the snow sock packaging. Remove the snow socks as soon as possible if you are no longer driving on snow-covered roads. Mclaren P11 - Complete.book Page 63 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 64 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM INSTRUMENTS OVERVIEW Overview.............................................................................................................. 3.2 Tachometer ....................................................................................................... 3.2 Speedometer .................................................................................................... 3.2 LEFT-HAND DISPLAY Overview.............................................................................................................. 3.3 Home screen ..................................................................................................... 3.6 Settings................................................................................................................ 3.7 Vehicle info...................................................................................................... 3.17 Language ......................................................................................................... 3.20 Trip computer ................................................................................................ 3.21 Vehicle lift ........................................................................................................ 3.22 Time display .................................................................................................... 3.25 Gearbox mode indicator ............................................................................ 3.25 Messages - Coupe and Spider.................................................................. 3.26 Messages - Spider Only .............................................................................. 3.30 RIGHT-HAND DISPLAY Gear position indicator ............................................................................... 3.33 Display window .............................................................................................. 3.33 Handling and powertrain display............................................................ 3.33 Oil temperature ............................................................................................. 3.34 Water temperature....................................................................................... 3.35 Fuel level........................................................................................................... 3.35 3.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM INSTRUMENTS OVERVIEW OVERVIEW Overview Tachometer Speedometer The tachometer (1) is mounted centrally within the instrument cluster. The red band in the display indicates the engine's maximum RPM. The speedometer (2) is a digital display mounted within the tachometer. The instruments are activated when the ignition in switched on, see Switching on the ignition, page 2.4. WARNING: No messages will be displayed if there is a malfunction in the instruments and/or one of the displays. The vehicle's handling characteristics may be affected. Contact your McLaren Retailer immediately. NOTE: Do not operate the engine at or near its maximum speed for a significant length of time. The fuel supply is cut off to protect the engine when the maximum RPM is reached. 3.2 NOTE: The speedometer changes from mph to kph when the units are changed from miles to kilometers, see Units, page 3.7 Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY LEFT-HAND DISPLAY Overview The left-hand display automatically presents the information and warning messages to the driver, as and when the computer determines it is required. Serious faults are also stored in the display and presented every time the ignition is switched on. Additional engine related warning messages will be displayed when the engine is switched on. These warnings messages will be repeated until the fault has been rectified. In addition to presenting vital information to the driver, the left-hand display also provides the facility to personalize some vehicle settings and enables operation of the Trip features. The stored messages can be viewed at any time when the ignition is on, see Error messages, page 3.18. WARNING: Operating and browsing menus whilst the vehicle is in motion could make you unable to observe road and traffic conditions and could cause an accident. WARNING: Do not ignore warning messages, failure to take appropriate action may result in injury or damage to the vehicle. Navigation through the menu structure is achieved using the control stalk mounted on the left of the steering column. 3.3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY The following categories are available. Home screen, page 3.6 Vehicle info, page 3.17 Trip computer, page 3.21 Settings, page 3.7 Language, page 3.20 Vehicle lift, page 3.22 3.4 Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY To navigate through a category 1. Move the control stalk up or down (SCROLL + or -) to highlight your choice. 2. Pull the stalk towards you (FORWARD) to enter your selection. 3. Then select the topic of interest from the list, move the control stalk up or down (SCROLL + or -) to highlight your choice. 4. Pull the stalk towards you (FORWARD) to move through to the next menu in the structure. 5. At the end of each structure there will be a display of information or a screen where a setting can be changed 6. When the function required is selected or a setting is made, press OK on the end of the control stalk to confirm. A setting is only changed if the OK button is pressed. 3.5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Home screen To change the content and layout of the Home screen, see Home screen, page 3.8. Range Range is the estimated distance until the vehicle requires refuelling. Trip This displays the distance traveled since the trip meter was last reset. When refuelling is required, a range distance will no longer be shown, and a fuel pump symbol will be displayed. Journey trip This displays the distance traveled during the current journey. Temperature WARNING: Even if the temperature displayed is above freezing point, the road surface may still be icy. You should always adapt your driving style and speed to suit the weather conditions. In addition to the time, the Home Screen displays any four of the following five functions. Odometer The odometer displays the total distance the vehicle has traveled. Temperature is the current outside temperature. There is a short delay before a change in outside temperature is displayed. When the outside air temperature falls below 37°F (3°C), the frost warning message will be displayed and the temperature reading will change color after the message has been displayed. When the outside temperature falls below 32°F (0°C), the ice warning will be displayed. 3.6 Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Settings Overview Display setup Units The following choices can be made from the Settings screen: The following selections can be made from Display setup: On the Units screen you can set the following units of measurement: • Display setup, page 3.7 • Units, page 3.7 Distance - select miles or km • Lighting, page 3.9 • Time and Date, page 3.8 • Vehicle, page 3.10 Speed - select mph or kph • Home screen, page 3.8 Temperature - select °C or °F • Defaults, page 3.17 Pressure - select kPa, Bar or PSI Fuel Consumption - select mpg, km/Liter or Liters/100 km 3.7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Volume - select UK gallons, US gallons or liters Time and Date Home screen Set the Time before setting the Date. There are two choices available to you. The time and date are both set manually. The first is to set four of the following five items, on the screen, in the position of your choice: The setting for your vehicle depends on the country or region where the vehicle was purchased. The units can be changed individually at any time. Press the OK button on the end of the control stalk to confirm your selections. NOTE: This feature also sets the units for the trip computer. Press the OK button on the end of the control stalk to confirm your choice. The time display can be set as 12 hour or 24 hour format, and the date display can be set as day followed by month or month followed by day. • Odometer • Range • Temperature • Trip since reset • Journey trip 3.8 Mclaren P11 - Complete.book Page 9 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY The second selection is the duration of the time out for return to the Home screen. Choose 5, 10, 30 or 60 seconds. Lighting External lighting Select External lighting, page 3.9, or Internal lighting, page 3.10. Two choices are available. Press the OK button on the end of the control stalk to confirm your choice. 1. Set the duration that external lights remain on after the vehicle has been unlocked. 2. Set the duration that external lights remain on after the vehicle has been locked. Press the OK button on the end of the control stalk to confirm your choice. 3.9 Mclaren P11 - Complete.book Page 10 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Internal lighting Vehicle It is possible to make the following selections: • Programmable Intake Sound Generator (ISG) - except 675LT, page 3.10 • Valet Mode, page 3.13 • Auto Door Lock, page 3.14 • Auto Fold Mirrors, page 3.14 • Auto Alarm, page 3.14 • Door Unlock, page 3.14 • Timed Crank, page 3.15 • Comfort Entry/Exit, page 3.15 • Silent Lock, page 3.15 There are the following choices to make. • Reverse Mirror Dip, page 3.15 • Tire Type, page 3.17 • Switch Lighting • Wiper Modes, page 3.16 • Footwell Lighting • Wiper Sensitivity, page 3.16 • Door Lighting • Courtesy Lighting A bar graph will appear. Move the control stalk up or down (SCROLL + or -) to highlight your choice. Press the OK button on the end of the control stalk to confirm your choice. 3.10 Programmable Intake Sound Generator (ISG) - except 675LT You can change the level of sound entering the cabin for each powertrain mode selected. WARNING: Operating and browsing menus whilst the vehicle is in motion could make you unable to observe road and traffic conditions and could cause an accident. Mclaren P11 - Complete.book Page 11 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Three different powertrain modes will be displayed in the ISG menu. Select the mode that you wish to change and a bar graph showing the current ISG sound level for that mode will appear. Move the menu control stalk up or down (SCROLL + or -) to achieve your preferred sound level for that powertrain mode. Press the OK button on the end of the menu control stalk to confirm your choice. The default settings for each mode are as follows: 3.11 Mclaren P11 - Complete.book Page 12 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Normal - 1 bar Sport - 2 bars Track - 3 bars NOTE: These are the default settings for each mode, but you can apply any level of sound to any powertrain mode. 3.12 Mclaren P11 - Complete.book Page 13 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Valet Mode When Disable Valet Mode is selected, the PIN must be entered again, before the mode is disabled. Press the OK button on the end of the control stalk to confirm your choice. NOTE: 675LT model vehicles are limited to a maximum speed of 35mph (55kph) when Valet Mode is activated. To enter the PIN, press the control stalk up or down until the first digit appears in the display, then press the OK button on the end of the control stalk to confirm your choice. For a 5 second period after entering Valet Mode, the PIN can be changed. Select Change Valet PIN and enter a 4 digit PIN of your choice. Repeat the process to enter the full PIN. With Valet Mode on, the luggage compartment and engine cover both remain locked, and a confirmation message appears in the left-hand display. The default PIN will be set to 0000. You should change this PIN at the earliest opportunity. 3.13 Mclaren P11 - Complete.book Page 14 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Performance Shift Cue (PSC) - 675LT PSC is an audible shift indicator, which will sound to indicate that an upshift is required to maintain optimum performance. When 'OFF' is selected, the PSC function will be disabled. When 'SPORT AND TRACK' is selected, PSC will be active in either Sport or Track powertrain or handling modes. When 'TRACK ONLY' is selected, PSC will only be active in Track powertrain or handling modes. Press the OK button on the end of the control stalk to confirm your choice. Auto Door Lock When you receive the vehicle, Auto door lock will be set to on. The vehicle doors will automatically lock as the vehicle moves off. Switch Auto Door Lock off, and the doors remain unlocked after moving off, unless, they are locked manually. Press the OK button on the end of the control stalk to confirm your choice. Auto Fold Mirrors When 'ON' is selected the exterior mirrors will fold as the vehicle is locked and unfold when the door is opened. If 'OFF' is selected, the mirrors will remain in their driving position. Press the OK button on the end of the control stalk to confirm your choice. 3.14 Auto Alarm With Auto Alarm selected, the vehicle will automatically lock and the alarm set if unlocked and left for 30 seconds with all doors and covers left fully closed. Press the OK button on the end of the control stalk to confirm your choice. Door Unlock When 'DRIVERS' is selected, only the driver's door will unlock when the vehicle is unlocked with either the key fob or door button. When 'BOTH' is selected, both doors will unlock when the vehicle is unlocked using either the key fob or door button. All closures will lock with either 'DRIVERS' or 'BOTH' selected. Press the OK button on the end of the control stalk to confirm your choice. Mclaren P11 - Complete.book Page 15 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Timed Crank With timed crank OFF, press and hold the STOP/START button until the engine starts. With timed crank ON, a single press of the STOP/START button will cause the engine to crank until it starts. Press the OK button on the end of the control stalk to confirm your choice. Comfort Entry/Exit When comfort entry/exit is ON, the driver's seat will move fully rearwards and to its lowest position when the ignition is off and the driver's door is opened. Seat memory - stalk return is activated along with this option, see Seat memory - Stalk return, page 1.35. When comfort entry/exit is OFF, the driver's seat will remain in position at all times. Press the OK button on the end of the control stalk to confirm your choice. Silent Lock When 'ON' is selected the turn signals are disabled when locking or unlocking using the keyless entry system. Reverse Mirror Dip If 'OFF' is selected, the turn signals always flash when the car is locked or unlocked, irrespective of the method used. All other lock and unlock features remain active. Press the OK button on the end of the control stalk to confirm your choice. Select 'OFF', 'BOTH' or 'PASSENGER'. 'OFF' - no mirror dip will occur when reverse is engaged. 'BOTH' - both mirrors will dip when reverse is engaged. 'PASSENGER' - passenger’s side mirror will dip when reverse is engaged. Press the OK button on the end of the control stalk to confirm your choice. 3.15 Mclaren P11 - Complete.book Page 16 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY To set the amount the mirrors will dip when reverse is selected: 1. Switch the ignition on. 2. Select 'BOTH' or 'PASSENGER' in the mirror dip section of the cluster. 3. Depress brake and select reverse gear. 4. Adjust mirror(s) to desired position, see Adjusting mirrors, page 1.52. 5. Take vehicle out of reverse. Wiper Modes Select either AUTOMATIC or TIMED. Wiper Sensitivity With AUTOMATIC selected, wiper operation in the Auto position will be controlled by the rain sensor. With TIMED selected, wiper operation in the Auto position will be an intermittent wipe. Press the OK button on the end of the control stalk to confirm your choice. The next time reverse is selected, the vehicle will automatically move the mirror/mirrors to the previously set offset from the normal position. The wiper sensitivity adjusts the amount of rain present on the windscreen required to activate the wiper with AUTOMATIC mode selected. A bar graph will appear showing current wiper sensitivity setting. A higher number of bars results in a lower amount of water being required to activate this function. Move the control stalk up or down (SCROLL + or -) to achieve your preferred setting for the wiper operation. 3.16 Mclaren P11 - Complete.book Page 17 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Vehicle info Press the OK button on the end of the control stalk to confirm your choice. Defaults Overview Select Restore Default Settings then press the OK button on the end of the control stalk to confirm that you wish to reset to the default settings. The following choices can be made from the Vehicle info screen. Tire Type The display will show all the possible tire types available. Select the tires fitted to your vehicle. Press the OK button on the end of the control stalk to confirm your choice. • Service interval, page 3.18 • Error messages, page 3.18 • Tire pressure monitoring, page 3.18 • Tire temperature monitoring, page 3.19 • Oil status, page 3.19 • Battery status, page 3.19 • Vehicle identification, page 3.20 3.17 Mclaren P11 - Complete.book Page 18 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Service interval Error messages Tire pressure monitoring At approximately 30 days or 625 miles (1000 km) before a service, the above display appears. If no error messages have been logged, the display will confirm this. This shows the pressures of each of the 4 tires. If the pressure figure appears in green, no action is required. If it appears as red text, have the pressure rectified as soon as possible. The message will then appear every time the ignition is switched on, with the time/distance figures reducing. Once the service has been carried out, the display will be reset by your McLaren Retailer. If a service becomes overdue, the display will show the distance it is overdue by. 3.18 If any errors have been logged, the screen will display Error Messages with arrows to scroll through the messages. Inspect the tire(s) for any possible causes of reduced tire pressure. Mclaren P11 - Complete.book Page 19 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Tire temperature monitoring Oil status Battery status This shows the current temperature of each of the 4 tires. If the temperature figure appears in green, no action is required. If it appears as red text, the safe operating temperature of the tires has been exceeded. Reduce speed or stop the vehicle until the temperatures are at a safe level, i.e. temperatures are displayed in green. Displays a bar showing the level of oil, together with the oil temperature. Displays a battery symbol showing the level of charge. To check the engine oil level, see Checking the engine oil, page 5.2 When battery charge is too low, a message 'Battery Fault' will also be displayed. For more information, see Charging the battery, page 5.14 Inspect the tire(s) for any possible causes of increased tire temperature. 3.19 Mclaren P11 - Complete.book Page 20 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Language The following choices are available: Vehicle identification • English (UK) • English (US) • French • German • Italian • Spanish • Chinese • Japanese • Russian • Korean Displays the vehicle identification number. Use this screen to set your preferred language. • Thai Press the OK button on the end of the control stalk to confirm your choice. If a language is not available on your vehicle, NOT SUPPORTED will appear in the display. Consult your McLaren Retailer for further assistance. 3.20 Mclaren P11 - Complete.book Page 21 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Trip computer The trip can display the following Information. Trip Journey trip Displays distance, average fuel consumption and average speed since the last trip reset. Displays distance, average fuel consumption and average speed for the current journey. The hours displayed is the time that the engine has been running since the last trip reset. The hours displayed is the time that the engine has been running in the current journey. Press the OK button on the end of the control stalk for 2 seconds to reset the information back to zero. The information will reset to zero when the engine is switched off. • Trip, page 3.21 • Journey trip, page 3.21 3.21 Mclaren P11 - Complete.book Page 22 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Vehicle lift Alternatively, access vehicle lift using the menu structure, see LEFT-HAND DISPLAY, page 3.3. The left-hand display will exit after the timeout duration has been exceeded back to home screen if there is no activity on the menu. To set the timeout to home screen duration, see Home screen, page 3.8. You can access the vehicle lift menu using the menu control stalk on the left of the steering column, whenever the engine is running. NOTE: Vehicle handling modes are inhibited when vehicle lift is lowering or raising. NOTE: Vehicle lift will be unavailable if launch mode is active. Hold the menu control stalk up for one second to quickly access the menu. A confirmation tone will be heard. 3.22 NOTE: If the vehicle lift icon in the righthand display is amber, the system is not available. Do not drive the vehicle at high speed and contact your McLaren Retailer as soon as possible. The Vehicle Lift menu displays the following Information: • Vehicle Lift - Raise, page 3.23 • Vehicle Lift - Lower, page 3.24 A confirmation tone will be heard, when vehicle lift is selected. Vehicle lift gives you the option to raise or lower the vehicle dependent on the current vehicle ride height. Ride height can only be raised when traveling at speeds below 31mph (50kph). The vehicle will automatically lower at speeds above 37mph (60kph). NOTE: The vehicle suspension can be left fully raised for extended periods, but it may relax to a lower level over time. If the vehicle is left in a raised position for a long period, a system reset may occur when the engine is next started to return the vehicle to normal ride height. If vehicle lift is used when in motion, slight adjustments to the steering feel may be experienced, this is normal and does not affect the operation of the vehicle. NOTE: Vehicle handling modes are inhibited when vehicle lift is lowering or raising. NOTE: Vehicle lift will be unavailable if launch mode is active. Mclaren P11 - Complete.book Page 23 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Vehicle Lift - Raise NOTE: When the vehicle is at normal ride height, you will only have the option to raise the vehicle. To raise the vehicle, move the menu control stalk upwards. NOTE: Vehicle lift will be delayed if the vehicle experiences any excessive steering wheel input. To change from raise to lower, move the menu control stalk downwards. The vehicle will start to lower, and the information displayed on the instrument cluster will confirm the change. NOTE: Always check the vehicle lift icon in the right-hand display before driving your vehicle. The change in vehicle height is confirmed by an ascending audible tone. ‘Vehicle Raising’ appears in the left-hand display and the vehicle lift icon will flash in the right-hand display. If the engine is stopped while the vehicle is raising, the system will stop and only continue to raise when the engine is restarted. When the vehicle is fully raised, an audible confirmation tone is heard. ‘Ride Height: Raised’ appears in the left-hand display and the vehicle lift icon is illuminated while the vehicle remains raised. 3.23 Mclaren P11 - Complete.book Page 24 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY If there is no further activity, the left-hand display will exit after the timeout duration has been exceeded back to home screen. To set the timeout to home screen duration, see Home screen, page 3.8. Vehicle Lift - Lower NOTE: To lower the vehicle while stationary, the driver’s door must be fully closed. Opening the driver’s door will cause the vehicle to auto raise. NOTE: When the vehicle is raised, you will only have the option to lower the vehicle. NOTE: Do not drive at high speed whilst the vehicle is lowering. If the vehicle begins to auto lower, a descending audible tone is heard, and the vehicle lift menu will be displayed in the left-hand display allowing you control of the system. NOTE: Always check the vehicle lift icon in the right-hand display before driving your vehicle. 3.24 To lower the vehicle, move the menu control stalk downwards. The change in vehicle height is confirmed by a descending audible tone. ‘Vehicle Lowering’ appears in the left-hand display and the vehicle lift icon will flash in the right-hand display. To change from lower to raise, move the menu control stalk upwards. The vehicle will start to raise, and the information displayed on the instrument cluster will confirm the change. When the vehicle is lowered, an audible confirmation tone is heard. ‘Ride Height: Normal’ appears in the left-hand display and the vehicle lift icon extinguishes. If there is no further activity, the left-hand display will exit after the timeout duration has been exceeded back to home screen. To set the timeout to home screen duration, see Home screen, page 3.8. Mclaren P11 - Complete.book Page 25 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Time display Gearbox mode indicator The clock appears in the top right-hand corner of the left-hand display. The gearbox mode indicator shows the current mode selected: NOTE: The time can be displayed in a 12 hour or 24 hour format. The time and date are set manually, see Time and Date, page 3.8. • Automatic A • Manual M • Temporary manual A/M • Launch L For more information, see Manual/Automatic mode, page 2.20. 3.25 Mclaren P11 - Complete.book Page 26 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Messages - Coupe and Spider The left-hand display may show messages that refer you to the Owner Manual. The table below indicates what you should do when one of these messages is displayed. Message Action ESC OFF Invalid Operation See Owners Manual The ESC deactivation procedure has not been followed correctly. See Electronic Stability Control (ESC), page 2.37. Airbrake Restricted Low Vehicle Speed See Owners Manual • Raise the vehicle speed above 9 mph (15 kph) and press the AERO button. • or to lower the Airbrake while the vehicle is traveling below 9 mph (15 kph) or is stationary, press the AERO button for 5 seconds, the Airbrake will begin to lower. Hold the AERO button for a further 3 seconds until the Airbrake has lowered fully to the normal driving position Clutch Over Temperature See Owners Manual The vehicle has been subject to extreme operating conditions. This may be caused by excessive hill starts, repeated hard acceleration, driving slowly up steep hills for extended periods. As a result, the gearbox may limit engine torque. Stop the vehicle and allow the engine to idle in neutral for a few minutes. Launch Mode Unavailable See Owners Manual The conditions to enable a Launch have not been met, see Launch control, page 2.30. immobilizer Failure See Owners Manual Contact your McLaren Retailer immediately. Use Emergency - Start Receptacle See Owners Manual The key fob is not functioning correctly. To start the engine, see Starting the vehicle, page 5.26. 3.26 Mclaren P11 - Complete.book Page 27 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Message Action Low brake fluid level See Owners Manual Top up brake fluid, see Brake fluid, page 5.8. Low steering fluid level See Owners Manual Top up the power steering fluid, see Power steering fluid, page 5.7. Check pressure on front left tire See Owners Manual Inspect wheels and tires, see Inspecting wheels and tires, page 5.33. Check pressure on front right tire See Owners Manual Inspect wheels and tires, see Inspecting wheels and tires, page 5.33. Check pressure on rear left tire See Owners Manual Inspect wheels and tires, see Inspecting wheels and tires, page 5.33. Check pressure on rear right tire See Owners Manual Inspect wheels and tires, see Inspecting wheels and tires, page 5.33. Pressure low on front left tire Stop vehicle Stop the vehicle and inspect wheels and tires, see Inspecting wheels and tires, page 5.33. Pressure low on front right tire Stop vehicle Stop the vehicle and inspect wheels and tires, see Inspecting wheels and tires, page 5.33. Pressure low on rear left tire Stop vehicle Stop the vehicle and inspect wheels and tires, see Inspecting wheels and tires, page 5.33. 3.27 Mclaren P11 - Complete.book Page 28 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Message Action Pressure low on rear right tire Stop vehicle Stop the vehicle and inspect wheels and tires, see Inspecting wheels and tires, page 5.33. Airbrake system temporarily unavailable See Owners Manual See Airbrake, page 2.44. Winter mode unavailable See Owners Manual See Winter mode - except 675LT, page 2.29. Launch mode aborted See Owners Manual See Launch control, page 2.30. Battery low please charge See Owners Manual See Charging the battery, page 5.14. Key battery low See Owners Manual See Replacing key fob battery, page 5.28. Low windscreen washer fluid See Owners Manual Top up windscreen washer fluid, see Windscreen washers, page 5.9. Passenger’s seat obstructed move seat upwards See Owners Manual See Electric seats, page 1.32. 3.28 Mclaren P11 - Complete.book Page 29 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Message Action ESC Failure - Go to McLaren Service Center The Electronic Stability Control is not functioning correctly. As a result, the engine torque will be significantly limited and the vehicle will enter Limphome mode. Care should be taken while driving in this condition, the braking and traction control related driving aids will not be fully functional. Please contact your McLaren Retailer, see Electronic Stability Control (ESC), page 2.37. Vehicle Limphome - Stop and restart the vehicle The vehicle has recovered from a previous system error. As a result in this mode, the engine torque will be significantly limited. Care should be taken while driving in this condition. To reinstate full performance please stop the vehicle and restart the engine. If the problem persists, contact your McLaren Retailer. See Limphome mode, page 2.14. Climate Control Fault - Go to McLaren Service Centre The climate control system is not functioning correctly. Please contact your McLaren Retailer. See CLIMATE CONTROL - EXCEPT 675LT, page 4.4 and CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT, page 4.12. Catalyst Temperature See Exhaust Temperature Monitoring, page 2.15 and Limphome mode, page 2.14. 3.29 Mclaren P11 - Complete.book Page 30 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Messages - Spider Only The left-hand display also shows messages relating to the roof and refer you to the Owner Manual. The table below indicates what these messages mean and what action you should take should you need to. Message Action Roof Operation In Progress Message is displayed during a roof open/close cycle. See Retractable Roof - Spider models, page 1.17. Roof Open Message is displayed when the roof has completed the stow (open) cycle. See Retractable Roof Spider models, page 1.17. Roof Closed Message is displayed when the roof has completed the raise (close) cycle. See Retractable Roof Spider models, page 1.17. Continue Roof Cycle Message is displayed when the roof has been stopped in an intermediate position during a open/close cycle. Operate the roof switch in the desired direction. See Retractable Roof - Spider models, page 1.17. Reduce Vehicle Speed, Release and Re-press Button For Roof Operation Message is displayed if the vehicle has exceeded 25 mph (40 kph) during a open/close cycle. Reduce the vehicle speed and operate the roof switch in the desired direction. See Retractable Roof - Spider models, page 1.17. Roof Not Locked Message is displayed if the roof has not been fully locked and the vehicle has exceeded 25 mph (40 kph). Reduce the vehicle speed and operate the roof switch in the desired direction. See Retractable Roof - Spider models, page 1.17. Ambient Temp Too Low Message is displayed if the ambient temperature is below 14°F (-10°C). Roof operation will be inhibited until the ambient temperature has risen to allow safe operating level. See Roof Operating Temperature, page 1.17. 3.30 Mclaren P11 - Complete.book Page 31 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Message Action Hydraulic System Over Temperature Message is displayed if the roof hydraulic system has become too hot. Roof operation will be inhibited until the hydraulic system cools to allow safe operating level. Please contact your McLaren Retailer. Bad Supply Voltage - Start Engine Message is displayed if the vehicle battery charge has become too low. Start the engine and allow the battery to be charged. Operate the roof switch in the desired direction. Please contact your McLaren Retailer. Roof System Power Down - Roof Not Secure Message is displayed when the roof has been stopped in an intermediate position during a open/close cycle and the roof system has turned off. Operate the roof switch in the desired direction. Please contact your McLaren Retailer. Tonneau Operation In Progress Message is displayed during tonneau cover open/close cycle. See Tonneau Cover - Spider models, page 1.21. Tonneau Open Message is displayed when the tonneau has completed the open cycle. See Tonneau Cover Spider models, page 1.21. Tonneau Closed Message is displayed when the tonneau has completed the close cycle. See Tonneau Cover Spider models, page 1.21. Roof Failure Message is displayed if there is a operational malfunction. Roof operation will be inhibited. Please contact your McLaren Retailer. 3.31 Mclaren P11 - Complete.book Page 32 Friday, January 22, 2016 9:43 AM INSTRUMENTS LEFT-HAND DISPLAY Message Action Confirm Tonneau Empty Message is displayed if the tonneau cover has been opened at any time whilst the roof has been raised and the roof or backlight switches have been pressed down to the lower (open) position. By releasing the switch and pressing OK on the menu control stalk, you confirm the tonneau area is empty and you accept if this is not the case that damage may occur to the retractable roof or backlight during operation. The roof or backlight will begin to lower (open) once the respective switch is pressed. See Retractable Roof - Spider models, page 1.17 and Backlight - Spider models, page 1.20. Engine Cover Open (except 675LT) Message is displayed if the engine cover has been opened and not closed correctly. Close the engine cover and operate the roof or tonneau switch in the desired direction. See Engine cover, page 1.11. Open Doors To Complete Operation Message is displayed if the roof control unit is unable to confirm door status. Roof operation will be inhibited until the door status can be confirmed. Please contact your McLaren Retailer. Continue Tonneau Cycle Message is displayed when the tonneau cover has been stopped in an intermediate position during a open/close cycle. Operate the tonneau switch in the desired direction. See Tonneau Cover - Spider models, page 1.21 and Retractable Roof - Spider models, page 1.17. 3.32 Mclaren P11 - Complete.book Page 33 Friday, January 22, 2016 9:43 AM INSTRUMENTS RIGHT-HAND DISPLAY RIGHT-HAND DISPLAY Gear position indicator Display window Handling and powertrain display The gear position indicator (1) shows the current gear position selected; forward gear number, neutral or reverse. The display window (2) provides the driver with visual confirmation of cruise control speed and Electronic Stability Control status. Confirmation of the handling and powertrain mode selected (3) is displayed. For more information on the different settings that are available, see Active dynamics control, page 2.24. When driving in manual mode, the gear position indicator will change from orange to red to indicate that an upshift is required to maintain optimum performance. NOTE: If the ACTIVE button has not been pressed (active dynamics panel is off), the Handling and Powertrain displays will both show Normal. 3.33 Mclaren P11 - Complete.book Page 34 Friday, January 22, 2016 9:43 AM INSTRUMENTS RIGHT-HAND DISPLAY Oil temperature If the gauge shows high temperature, ORANGE, slow down until the temperature drops to normal. If the temperature continues to rise and the bar turns RED, a warning message will appear in the left-hand display. Additionally, if all conditions for a particular mode are not met when the selection is made, the mode will not be implemented until the conditions are met. Stop the vehicle as soon as safety permits and contact your McLaren Retailer immediately. The oil temperature is displayed in the form of a colored bar graph (1) on the right-hand side of the instrument cluster. When the engine is first started the bar will be BLUE. As the engine warms up the color will change to GRAY, indicating normal temperature. High temperature is indicated if the bar turns ORANGE and excessive temperature is indicated by the bar turning RED. 3.34 Mclaren P11 - Complete.book Page 35 Friday, January 22, 2016 9:43 AM INSTRUMENTS RIGHT-HAND DISPLAY Water temperature Fuel level If the gauge shows high temperature, ORANGE, slow down until the temperature drops to normal. If the temperature continues to rise and the bar turns RED, a warning message will appear in the left-hand display. Stop the vehicle as soon as safety permits and contact your McLaren Retailer. The water temperature is displayed in the form of a colored bar graph (2) on the righthand side of the instrument cluster. When the engine is first started the bar will be BLUE. As the engine warms up the color will change to GRAY, indicating normal temperature. The fuel level is displayed in the form of a colored bar graph (3) on the right-hand side of the instrument cluster. The bar will usually be GRAY. When the bar turns RED there is approximately 2.9 gallons of fuel remaining in the tank. High temperature is indicated if the bar turns ORANGE and excessive temperature is indicated by the bar turning RED. 3.35 Mclaren P11 - Complete.book Page 36 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 37 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 38 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE WINDOWS Safety.................................................................................................................... 4.2 Opening and closing....................................................................................... 4.2 CLIMATE CONTROL - EXCEPT 675LT Overview.............................................................................................................. 4.4 Controls ............................................................................................................... 4.4 AC button............................................................................................................ 4.5 Modes of operation......................................................................................... 4.5 Temperature control...................................................................................... 4.7 Blower speed control ..................................................................................... 4.8 Air distribution settings................................................................................. 4.9 Demisting/Defrosting.................................................................................... 4.9 Air Recirculation mode............................................................................... 4.10 System Calibration ....................................................................................... 4.11 Heated rear window..................................................................................... 4.11 LO-JACK STOLEN VEHICLE RECOVERY SYSTEM Overview .......................................................................................................... 4.19 In the event of a theft ................................................................................. 4.19 INTERIOR FEATURES Interior lighting.............................................................................................. Entry lighting.................................................................................................. Exit lighting ..................................................................................................... Stowage net.................................................................................................... Sun visors......................................................................................................... Stowage compartment.............................................................................. Cup holders..................................................................................................... Owner documentation............................................................................... Accessory power sockets.......................................................................... Car cover .......................................................................................................... 4.20 4.20 4.21 4.21 4.23 4.23 4.24 4.24 4.25 4.26 CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT Overview........................................................................................................... 4.12 Controls ............................................................................................................ 4.12 Modes of Operation ..................................................................................... 4.13 AC (Screen) Button....................................................................................... 4.14 Demisting/Defrosting................................................................................. 4.14 Temperature Control .................................................................................. 4.15 Air Recirculation Mode ............................................................................... 4.16 Blower Speed Control ................................................................................. 4.16 Air Distribution Settings............................................................................. 4.17 System Calibration ....................................................................................... 4.18 4.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE WINDOWS WINDOWS Safety WARNING: Ensure that no one can be trapped as you open or close the windows. Do not rest any part of your body against the window. There is a risk of becoming trapped by the movement of the window. If there is a risk of entrapment, stop movement of the window. Opening and closing WARNING: The key fob allows the engine to be started and is also used to activate other features on the vehicle. Take the key fob with you, every time you leave the vehicle to prevent unsupervised operation of the windows, which may result in injury. Switches for both windows are located on the driver’s door console. A switch for the passenger’s window is located on the passenger’s door console. 1. Driver's window switch. 2. Passenger's window switch. Press switch (1) or (2). The window will open for as long as the switch is pressed. Pull switch (1) or (2). The window will close for as long as the switch is pressed. To open or close a window fully, press or pull switch (1) or (2) fully and release. NOTE: To stop a window opening or closing, press or pull the appropriate switch. 4.2 Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE WINDOWS NOTE: If the vehicle ignition is in the accessory stage and the windows are not fully closed, window control is still available for a period of 60 seconds, or until the window becomes fully closed. Anti-trap protection WARNING: Do not leave children unattended in the vehicle, they could be injured by the movement of the window. Resetting the windows The windows must be reset if the battery has been discharged or disconnected, or if the anti-trap feature has been activated. Anti-trap protection will stop windows closing if an obstruction or resistance is detected. Ensure that both doors are closed and the ignition is switched on. Push switches (1) and (2) downwards until the windows are open and hold them in this position for 5 seconds. If the anti-trap protection is triggered, check the window and the window aperture and remove any obstruction, before operating the windows again. In the event of an anti-trap event when closing the door, see Closing a door, page 1.10. Pull both switches upwards until the windows are closed and hold them in this position for 5 seconds. The windows are now reset. If this does not resolve the issue, please contact your McLaren Retailer immediately. 4.3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT CLIMATE CONTROL - EXCEPT 675LT Overview Controls The system can be operated in automatic mode or settings can be adjusted manually. Driver's climate controls The combination filter reduces the quantity of dust and pollutants entering the car. WARNING: Follow the recommended settings given for heating or cooling. If the windows mist up, you may no longer be able to observe road and traffic conditions and could cause an accident. NOTE: The climate control system operates more effectively with the doors and windows closed. However, if the vehicle has been standing in a hot environment for a long time, ventilate by opening the windows briefly. NOTE: The interior air temperature sensor is located between the steering wheel and the center console. Do not obstruct airflow to this sensor or the performance of the climate control system will be reduced. NOTE: The vehicle will retain the current climate control settings when the ignition is switched off. 4.4 The climate control system is operated using controls located on the driver’s and passenger’s door consoles. When MONO is selected, the driver can adjust the blower speed, and the temperature on the passenger’s side of the vehicle. 1. 2. 3. 4. 5. 6. 7. 8. 9. Windscreen demist button Air recirculation button Temperature control MONO button Air conditioning (AC) button AUTO button Blower speed control Air distribution buttons Heated rear window button Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT Passenger's climate controls AC button Modes of operation The air conditioning can be switched off at any time in any mode. Press the AC button. The light on the button extinguishes. Automatic mode To switch the air conditioning on, press the AC button again, the light on the button illuminates. In automatic mode, the climate control system maintains the set interior temperature using a combination of differing blower speeds, air recirculation and air distribution. To switch on automatic mode, press the AUTO button. The light on the button illuminates and the air distribution, temperature and blower speed are adjusted automatically on both sides of the vehicle. 1. Temperature control 2. Blower speed control AUTO will appear on the display on driver’s and passenger’s door consoles. In AUTO mode, there is no need to adjust the blower speed or air distribution, the system will operate whichever controls it needs to maintain the set temperature. If you do wish to change the air distribution of the climate control system, press the preferred button. This will then put the system into AUTO fan mode. 4.5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT This is denoted by the fan symbol underneath AUTO in the display console. The system will still continue to control the blower speed to maintain the set temperature. There is an additional mode known as AUTO LO. The AUTO LO function operates the fan at lower speeds to achieve and maintain the desired cabin temperature. This reduces the level of sound emitted from the climate control system whilst retaining auto functionality. To switch on AUTO LO, press the AUTO button once when in AUTO mode. The LED will remain lit and the text will change in the display to AUTO LO. To return to AUTO, press the AUTO button a single time. AUTO LO can be entered from manual mode with a double press of the AUTO button. If necessary, the system settings can be manually adjusted, see Manual mode, page 4.6. 4.6 Manual mode To adjust the air temperature manually, see Temperature control, page 4.7. To adjust the blower speed manually, see Blower speed control, page 4.8. When either the air temperature or blower speed is adjusted manually, the light on the AUTO button will extinguish and the blower speed will appear on the display on driver’s and passenger’s door consoles. MONO mode button MONO mode allows the driver to transfer their air temperature settings directly over to the passenger’s climate control panel. Press the MONO button, the light on the button will illuminate and all air temperature settings will be transferred over to the passenger’s climate control panel. Any changes the driver makes on their climate control panel, will change automatically on the passenger’s climate control panel. If the passenger then adjusts any of the air temperature settings on their climate control panel, MONO mode will be deactivated. The MONO button light will then extinguish. The driver can exit MONO mode at any time by a single press of the MONO button. The MONO button light will then extinguish. Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT Temperature control To set the temperature to maximum, rotate the control clockwise until 'HI' is displayed. In AUTO mode, the climate control system adjusts the air temperature to the highest setting, the blower speed is set to maximum and air is directed to the footwells. To set the temperature to minimum, rotate the control counter-clockwise until 'LO' is displayed. In AUTO mode, the climate control system sets the air temperature to the lowest setting, the blower speed is set to maximum and air is directed to the center air vents. Rotate the control clockwise to increase the temperature, or counter-clockwise to decrease. Press the AUTO button to return to automatic mode. The temperature set will appear on the displays on the driver’s and passenger’s door consoles. NOTE: With 'LO' selected, it is not possible to switch off the air conditioning or switch on demist mode. NOTE: The temperature can be adjusted in 0.5°F (0.5°C) increments from 61°F to 82°F (16°C to 28°C). Change the temperature in small increments, until the desired setting is achieved. 4.7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT Blower speed control Rotate the blower control clockwise to increase or counter-clockwise to decrease blower speed. If in automatic mode, the light on the AUTO button will extinguish. The blower speed will appear on the displays on the driver’s and passenger’s door consoles. Press the AUTO button to return to automatic mode. NOTE: When the engine is first started, the blower speed is limited and the air is directed at the windscreen until the engine has warmed up. Blower speed is also limited when the ignition is in the accessory position. NOTE: When the engine is restarted from hot, the blower operates at low speed. This removes warm air from the vents, the blower speed will then increase to the requested setting. 4.8 Mclaren P11 - Complete.book Page 9 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT Air distribution settings Demisting/Defrosting When an air distribution button is pressed, the icon on the button will illuminate and the setting will be displayed briefly on the control panel. Dashboard air vents The air distribution can be set using the airdistribution controls. Press button (1) to direct air to the windscreen, press button (2) to direct air to the center air vents, press button (3) to direct air to the footwell vents. All three buttons, a combination of any two or an individual button can be selected at any time. Press the demist button. The icon on the button illuminates, the demist symbol appears in the control panel display and the air conditioning switches on if previously off. The blower will operate at full speed and the air temperature will be set to 'HI'. Turn a quarter turn in either direction until the vent is open or closed. NOTE: It is possible to manually reduce the blower speed using either the driver’s or passenger’s blower speed control, see Blower speed control, page 4.8. 4.9 Mclaren P11 - Complete.book Page 10 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT Air Recirculation mode NOTE: Switch on the air conditioning to prevent the windows misting. NOTE: Air recirculation is inhibited when demist mode is selected. Press the air recirculation button, to select air recirculation. The icon on the button will illuminate. To switch off, press the air recirculation button again and the icon on the button will extinguish. Press the demist button again to exit the demist mode. The icon on the button extinguishes, and the air temperature and blower speed return to their original settings. Select Air recirculation when unpleasant smells or fumes are entering the vehicle. WARNING: Switch to air recirculation mode briefly if outside temperatures are low. Be aware that the windows could mist up, which may impair your visibility. As a result, you could be distracted from road and traffic conditions and cause an accident. 4.10 Mclaren P11 - Complete.book Page 11 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL - EXCEPT 675LT System Calibration Heated rear window NOTE: Switching on the heated rear window also switches on the exterior mirror heaters. The rear window heating switches off automatically after a set time, depending on the outside air temperature. The climate control system may periodically re-calibrate itself to ensure optimum system performance is maintained. During this cycle, the CAL symbol is shown on the display and system operation is inhibited. Calibration should take no more than a minute and when complete, CAL will disappear from the display. WARNING: Remove any accumulated ice or snow from the windows before setting off. Impaired visibility could endanger yourself and others. Press the button, to heat the rear window. The icon on the button will illuminate. To switch off, press the button again and the icon on the button will extinguish. If CAL does not disappear, contact your McLaren Retailer. 4.11 Mclaren P11 - Complete.book Page 12 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT Overview Controls The system can be operated in automatic mode or settings can be adjusted manually. Climate Controls The combination filter reduces the quantity of dust and pollutants entering the vehicle. WARNING: Follow the recommended settings given for heating or cooling. If the windows mist up, you may no longer be able to observe road and traffic conditions and could cause an accident. NOTE: The climate control system operates more effectively with the doors and windows closed. However, if the vehicle has been standing in a hot environment for a long time, ventilate by opening the windows briefly. NOTE: The interior air temperature sensor is located between the steering wheel and the center console. Do not obstruct airflow to this sensor or the performance of the climate control system will be reduced. NOTE: The vehicle will retain the current climate control settings when the ignition is switched off. 4.12 The climate control system is operated using the touchscreen located on the center console. Press the button to switch on the climate control screen. 1. 2. 3. 4. 5. 6. 7. 8. 9. AUTO/AUTO LO button Air conditioning (AC) button Demist button MONO button Temperature control - Right-hand side Air recirculation button Blower speed control Air distribution buttons Temperature control - Left-hand side Mclaren P11 - Complete.book Page 13 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT Modes of Operation Automatic Mode In automatic mode, the climate control system maintains the set interior temperature using a combination of differing blower speeds, air recirculation and air distribution. The control panel uses different colors to indicate operational states: • Orange indicates ON. • White indicates OFF but available for use. • Gray indicates not available for use. To switch on automatic mode, touch the AUTO button. The light on the button illuminates and the air distribution, temperature and blower speed are adjusted automatically on both sides of the vehicle. In AUTO mode, there is no need to adjust the blower speed or air distribution, the system will operate whichever controls it needs to maintain the set temperature. If you do wish to change the air distribution of the climate control system, touch the preferred button. This will then put the system into AUTO fan mode. This is denoted by the color of the blower speed slider. The bar is gray and the slider moves by itself when the blower is under automatic control. Here, the system is continuing to control the blower speed to maintain the set temperature. There is an additional mode known as AUTO LO. The AUTO LO function operates the fan at lower speeds to achieve and maintain the desired cabin temperature. This reduces the level of sound emitted from the climate control system whilst retaining auto functionality. To switch on AUTO LO, press the AUTO button once when in AUTO mode. The AUTO LO symbol will change from white to orange. To return to AUTO, press the AUTO button a single time. If the blower speed is adjusted while AUTO LO is active the manual mode will be selected by default. If the AUTO button is then pressed the AUTO LO mode will be activated again. Pressing the AUTO button a second time will select the AUTO mode. If necessary, the system settings can be manually adjusted, see Manual Mode, page 4.13. Manual Mode To adjust the air temperature, see Temperature Control, page 4.15. To adjust the blower speed manually, see Blower Speed Control, page 4.16. MONO Mode MONO mode allows any changes the driver makes to their air temperature settings to be mirrored automatically to the passenger’s temperature setting. Touching the on-screen MONO button will cause it to illuminate and automatically implement the driver’s air temperature settings to the passenger’s side. 4.13 Mclaren P11 - Complete.book Page 14 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT AC (Screen) Button The driver can exit MONO mode at any time by a single touch of the MONO button. The MONO button on the screen will then extinguish. Demisting/Defrosting The AC enhances cooling and dehumidifying of air. It is used by max-cooling and defrosting modes. Use the AC screen button as an ON/OFF switch. Touch the demist button. The icon on the button illuminates and the air conditioning switches on if previously off. The blower will operate at full speed and the air temperature will be set to 'HI'. NOTE: It is possible to manually reduce the blower speed, see Blower Speed Control, page 4.16. NOTE: Air recirculation is inhibited when demist mode is selected. 4.14 Mclaren P11 - Complete.book Page 15 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT Temperature Control To set the temperature to maximum, touch the + button until 'HI' is displayed. In AUTO mode, the climate control adjusts the air temperature to the highest setting, the blower speed is set to maximum and air is directed to the footwells. Touch the demist button again to exit the demist mode. The icon on the button extinguishes, and the air temperature and blower speed return to their original settings. To set the temperature to minimum, touch the - button until 'LO' is displayed. In AUTO mode, the climate control sets the air temperature to the lowest setting, the blower speed is set to maximum and air is directed to the center air vents. Touch the + button to increase the temperature, or touch the - button to decrease. Alternatively, touch the temperature control slider and drag it to the desired setting. NOTE: The temperature can be adjusted in 1°F (0.5°C) increments from 61°F to 83°F (16°C to 28°C) by using the + to increase and - to decrease the temperature, until the desired setting is achieved. The temperature set will appear on the displays above the driver’s and passenger’s controls on the touchscreen. NOTE: With 'LO' selected, it is not possible to switch off the air conditioning. 4.15 Mclaren P11 - Complete.book Page 16 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT Air Recirculation Mode Blower Speed Control NOTE: Switch on the air conditioning to prevent the windows misting. Touch the air recirculation button, to Activate air recirculation. The touch screen button will illuminate. To switch off air recirculation, touch the button again and the button illumination will extinguish. Select air recirculation when unpleasant smells or fumes are entering the vehicle. Air from outside the vehicle is now prevented from entering the cabin. WARNING: Switch to air recirculation mode briefly if outside temperatures are low. Be aware that the windows could mist up, which may impair your visibility. As a result, you could be distracted from road and traffic conditions and cause an accident. 4.16 NOTE: When the engine is first started, the blower speed is limited and the air is directed at the windscreen until the engine has warmed up. The blower speed may be limited, dependent on the ignition. NOTE: When the engine is restarted from hot, the blower may operate at low speed. This removes warm air from the vents, the blower speed will then increase to the requested setting. Mclaren P11 - Complete.book Page 17 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT Air Distribution Settings Dashboard Air Vents Touch the + button to increase the blower speed, or touch the - button to decrease blower speed. Alternatively, touch the fan icon and drag it to the desired setting. If in automatic mode, adjusting the blower speed will cause the AUTO button to extinguish. Press the AUTO button to return to automatic mode. The air distribution can be set using the airdistribution controls. Press top screen area to direct air to the windscreen, press middle screen area to direct air to the center air vents, press bottom screen area to direct air to the footwell vents. Turn a quarter turn in either direction until the vent is open or closed. All three screen areas, a combination of any two or an individual area can be selected at any time. When an air distribution screen area is pressed, the screen icon will illuminate. 4.17 Mclaren P11 - Complete.book Page 18 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE CLIMATE CONTROL (TOUCHSCREEN CONTROLS) - 675LT System Calibration The climate control system may periodically re-calibrate itself to ensure optimum system performance is maintained. During this cycle, the “AC Calibrating” message is shown on the display and system operation is inhibited. Calibration should take no more than a minute and when complete the “AC Calibrating” message will disappear from the display. If the “AC Calibrating” message does not disappear, contact your McLaren Retailer. 4.18 Mclaren P11 - Complete.book Page 19 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE LO-JACK STOLEN VEHICLE RECOVERY SYSTEM LO-JACK RECOVERY SYSTEM VEHICLE Overview STOLEN This section provides an overview of the LoJack Vehicle Recovery System. If you need further clarification, contact your McLaren Retailer. The Lo-Jack system comprises a small, silent radio transmitter installed in the vehicle to aid locating the vehicle in the event of a theft. Once installed, the transmitter and the Vehicle Identification Number (VIN) are registered with the National Crime Information Center (NCIC) database, used by federal, state and local law enforcement agencies throughout the USA. In the event of a theft 1. If you discover the vehicle has been stolen, report the theft to the local Police authority including the details of the VIN. 2. The theft is then recognized by the NCIC database which automatically triggers the activation of the Lo-Jack transmitter in the stolen vehicle. 3. Once the transmitter is activated, it will transmit a signal which can be detected by tracking units fitted to Police vehicles within a 2-3 mile radius. 4. When the Police secure the stolen vehicle, arrangements will have to be made with you for the vehicle to be collected. The Police may recover the vehicle to a secure compound for further investigation. You may be liable for any recovery and storage charges. 4.19 Mclaren P11 - Complete.book Page 20 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE INTERIOR FEATURES INTERIOR FEATURES Interior lighting Entry lighting Reading lights Press touch pads (1) or (2) to switch on the desired reading light. For gradual reading illumination, press and hold touch pad (1) or (2) until desired lighting is achieved. Press touch pads (1) or (2) again to switch off the respective reading light. Courtesy lighting The interior of your McLaren is lit in the following areas: 1. Left-hand reading light on/off/gradual touch pad 2. Right-hand reading light on/off/gradual touch pad 3. Interior lighting on/off touch pad For full interior lighting, press the touch pad (3) quickly. • the driver's and passenger's footwells, when you open a door • the center console (illuminated by a light within the overhead light panel), if the ignition is on • the interior door handles, if the ignition is on NOTE: Ensure that the interior lighting is switched off when leaving the vehicle. The courtesy lighting extinguishes one minute after the doors have been closed or when the ignition is switched on. To switch off the interior lighting, press touch pad (3) again. The luggage compartment light illuminates when the luggage compartment is opened. 4.20 Entry lighting improves visibility and security when you approach the vehicle. When the vehicle is unlocked, the headlamps and tail lamps illuminate for a period of time or until the ignition is switched on. To set the entry lighting duration, see External lighting, page 3.9. Mclaren P11 - Complete.book Page 21 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE INTERIOR FEATURES Exit lighting Stowage net Exit lighting improves visibility and security when you leave the vehicle by illuminating the headlamps and tail lamps for a period of time. Bulkhead stowage net To set the exit lighting duration, see External lighting, page 3.9. Exit lighting can also be activated manually by pulling the turn signal stalk towards you momentarily three times. The vehicle must be in an awake state with the ignition off. WARNING: Do not use the stowage net to transport any heavy, sharpedged or breakable objects. Occupants could be injured by objects being thrown around during sharp braking, a sudden change of direction or an accident. Passenger’s footwell stowage net Every additional pull on the turn signal stalk whilst the exit lighting has been activated will increase the time increment by an additional 15 seconds. Once the vehicle has been exited, locked and completed its set operating time, the exit lighting will extinguish and the function will not be available, unless it is switched on in the instrument cluster or is manually activated again through the turn signal stalk. A stowage net is fitted on the bulkhead between the seats for storing small items. NOTE: The maximum weight the stowage pocket can support is 2.2 lbs (1 kg). There is a stowage net in the passenger’s footwell for storing small items. 4.21 Mclaren P11 - Complete.book Page 22 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE INTERIOR FEATURES WARNING: Do not use the stowage net to transport any heavy, sharpedged or breakable objects. Occupants could be injured by objects being thrown around during sharp braking, a sudden change of direction or an accident. NOTE: Maximum item sizes for the passenger stowage net are as follows. • Maximum item size 1 - 9.84 in Height x 7.87 in Width x 0.79 in Depth. • Maximum item size 2 - 3.94 in Height x 7.87 in Width x Depth 2.7 6in. Passenger footwell stowage net maximum item size 2 - 3.94 in Height (1) x 7.87 in Width (2) x Depth 2.76 in (3). Passenger footwell stowage net maximum item size 1 - 9.84 in Height (1) x 7.87 in Width (2) x 0.79 in Depth (3). 4.22 WARNING: Do not place items in the passenger’s footwell stowage net that exceed the dimensions stated previously. It could lead to personal injury or prevent the occupant restraint system from performing correctly. Mclaren P11 - Complete.book Page 23 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE INTERIOR FEATURES Sun visors Stowage compartment Fold the sun visors down to protect your eyes from bright sunlight as you are driving. A compartment is fitted in the center console for storing small items. WARNING: The stowage compartment must be closed when items are stored in it. Occupants could be injured by objects being thrown around during sharp braking, a sudden change of direction or an accident. The USB connector and a 3.5 mm auxiliary audio input socket are located in the stowage compartment. NOTE: Always close the stowage compartment when leaving the vehicle, or the interior motion sensor (if fitted) will not function. NOTE: The area behind the seats is not designed for storing luggage or any other personal items. 4.23 Mclaren P11 - Complete.book Page 24 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE INTERIOR FEATURES Cup holders Owner documentation Your McLaren is equipped with the following documents: Stowage pocket A pocket is fitted to the front edge of each seat for storing small items. • Service and Warranty booklet - provides information on what to do and who to contact in the event of problems. • IRIS user guide - provides information on how to operate all the functions of the IRIS system fitted to your McLaren. Utilize the two cup holders for safe convenient storage of closed drink containers when on a journey. WARNING: Drinking while the car is moving could cause you to become distracted which could lead to an accident. These documents are stored in a slot under the dashboard on the passenger's side. 4.24 Mclaren P11 - Complete.book Page 25 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE INTERIOR FEATURES Accessory power sockets Luggage compartment socket The accessory socket, located in the luggage compartment, is the only one that can be used to connect the battery charger. NOTE: Do not leave any device (except the battery charger), that draws power from the vehicle, connected to the socket for extended periods without the engine running. This may lead to excessive battery drain. Interior accessory 12V socket The interior accessory 12V socket is located inside the passenger compartment, behind the center console. NOTE: Do not connect the battery charger to the interior accessory socket. 4.25 Mclaren P11 - Complete.book Page 26 Friday, January 22, 2016 9:43 AM COMFORT AND CONVENIENCE INTERIOR FEATURES Car cover A car cover, suitable for use inside a garage, can be purchased from your McLaren Retailer. McLaren recommends that the car is covered if it is to be left in storage for periods over two weeks. Clean the vehicle inside and out, ensuring that it has fully dried, prior to fitting the cover. NOTE: Allow the engine to cool before fitting the cover or the hot exhaust pipes could cause damage to the cover. 4.26 Mclaren P11 - Complete.book Page 27 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 28 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP Engine oil............................................................................................................. 5.2 Gearbox oil level ............................................................................................... 5.5 Coolant................................................................................................................. 5.6 Power steering fluid........................................................................................ 5.7 Brake fluid ........................................................................................................... 5.8 Windscreen washers....................................................................................... 5.9 EMERGENCY EQUIPMENT Emergency Equipment Safety ................................................................ 5.10 Luggage compartment equipment - except 675LT....................... 5.10 Luggage compartment equipment - 675LT ..................................... 5.10 Warning triangle ............................................................................................ 5.11 First Aid kit ....................................................................................................... 5.11 Tire sealant ...................................................................................................... 5.12 Towing eye ...................................................................................................... 5.12 Fuel funnel....................................................................................................... 5.12 Engine cover release tool - 675LT ......................................................... 5.13 Fire extinguisher............................................................................................ 5.13 BATTERY CARE AND MAINTENANCE Battery safety ................................................................................................. 5.14 Charging the battery ................................................................................... 5.14 Boost starting from another vehicle ..................................................... 5.15 FUSES Fuse replacement......................................................................................... 5.18 Main fuse box.................................................................................................. 5.18 Secondary fuse box...................................................................................... 5.21 Battery fuse box............................................................................................. 5.22 LIGHTING Vehicle lights .................................................................................................. 5.24 MANUAL UNLOCKING AND OPENING Unlocking - discharged battery .............................................................. Starting the vehicle...................................................................................... Door opening from inside - discharged battery............................... Opening luggage compartment - discharged battery .................. Replacing key fob battery ......................................................................... 5.25 5.26 5.27 5.28 5.28 WASHERS AND WIPER Replacing the wiper blade......................................................................... 5.31 WHEELS AND TIRES Wheels and tires............................................................................................ 5.32 Deflated tire .................................................................................................... 5.35 P ZeroTM Trofeo R tires ............................................................................. 5.37 VEHICLE CARE Washing your McLaren............................................................................... 5.38 Cleaning the interior ................................................................................... 5.40 RAISING THE VEHICLE Vehicle lifting points.................................................................................... 5.41 McLAREN ASSISTANCE McLaren Assistance..................................................................................... 5.42 In the event of a breakdown .................................................................... 5.42 Towing for recovery..................................................................................... 5.43 5.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP FLUID TOPPING UP Engine oil To check the engine oil level manually: The engine uses approximately 0.1 quarts of oil for every 625 miles (1,000 km), depending on your style of driving. The oil consumption may be higher than this when the vehicle is new or if you frequently drive at high engine speeds. You will only be able to estimate the oil consumption after the vehicle has been driven for several thousand miles or kilometers. NOTE: Lubricant additives could damage the engine or gearbox. Damage caused by such additives is not covered by the vehicle warranty. Further information is available from your McLaren Retailer. Checking the engine oil The engine oil level must be manually checked. No automatic level checks or warnings are provided. 5.2 1. Ensure the following conditions are met: • Vehicle stationary and positioned on a level surface. • Neutral selected and the foot brake applied (use left foot). NOTE: The foot brake must be applied for the entire duration of the oil level check. 2. The level is viewed in the Vehicle Info section in the left-hand display, see Vehicle info, page 3.17. 3. Start the engine and hold the engine speed at 2,000 rpm for 40 seconds. Allow the engine oil temperature to reach a temperature of 70°C (158°F). NOTE: The throttle can be fully depressed as the engine speed will be electronically limited to 2,000 rpm. 4. When the timer has reached '0', the oil level will be shown on the display along with a description. NOTE: The line on the display indicates the maximum oil level for 19 seconds after the oil level is read. Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP Topping up the engine oil WARNING: There is a risk of injury if the engine cover is open, even when the engine is not running. Engine components become very hot. Avoid contact, there is a risk of severe burns. NOTE: The engine must be switched off before carrying out the oil top up process. NOTE: McLaren only recommends the use of Mobil 1 New Life 0W-40 engine oil. 5. If the engine oil is below the target level, top up the oil in accordance to the following procedure. NOTE: Once the oil level check has been completed and returned a value, do not continue to test the system. This may lead to aeration of the oil and return a false value. To end the oil level check, release the throttle pedal and return to the Vehicle info menu by moving the menu stalk back. 1. Open the engine cover, see Engine cover, page 1.11. 2. Unscrew the engine oil filler cap. 3. Top up with the correct quantity of Mobil 1 New Life 0W-40 engine oil, in 0.26 quart quantities. Approximately 0.79 quarts is required to raise the level from minimum to maximum. Refer to Top up quantity, page 5.5. NOTE: Do not overfill. Top up in 0.26 quart quantities and then re-check before adding further oil. 5.3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP 4. Check the left-hand display to ensure level is correct. NOTE: If you have inadvertently overfilled the engine with oil, you must have any excess removed at your McLaren Retailer. The engine or the catalytic converter could be damaged. 5. Refit the engine oil filler cap. ENVIRONMENTAL: When topping up, take care not to spill any oil. Oil must not be allowed to escape into the soil or waterways. NOTE: Ensure oil filler cap is refitted correctly, with the markings on the cap and bowl aligned. If not, it may become detached and allow oil to escape the system. If closed correctly the handle should be facing directly to the front of the car with the recesses parallel to the engine compartment side covers. 5.4 6. Close the engine cover, see Engine cover, page 1.11. Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP Gearbox oil level Top up quantity Based on the oil status displayed on the lefthand display, add the required quantity of oil as shown in the following table. Bars on display Quantity of oil required 1 bar - red - under filled 2.0 pt. (1.00 litre) 2 bars - yellow - min. 1.5 pt. (0.75 litre) 3 bars - green - OK 1.0 pt. (0.50 litre) 4 bars - green - OK 0.5 pt. (0.25 litre) 5 bars - green - OK 0.2 pt. (0.10 litre) 6 bars - green - target 0.0 pt. (0.00 litre) 7 bars - yellow - max. 0.0 pt. (0.00 litre) 8 bars - red - overfilled Contact your McLaren Retailer If you experience oil loss or problems with gear shifts, have the gearbox checked by your McLaren Retailer. NOTE: The clutch and gearbox oil has mileage related service intervals. This maintenance can only be carried out by your McLaren Retailer. Oil temperature If the oil temperature is too high, a warning will be displayed in the left-hand display. Reduce the vehicle and engine speed until the warning message disappears. 5.5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP Coolant Coolant is a mixture of water and antifreeze/corrosion inhibitor. Only check the coolant when the vehicle is positioned on level ground and the engine is cool. 1. Open the engine cover, see Engine cover, page 1.11. Topping up the coolant WARNING: The cooling system is pressurized. Only unscrew the cap when the engine is cool. You could be scalded by hot escaping coolant if you attempt to unscrew the cap whilst the engine is still warm. WARNING: Coolant is highly flammable. Fire, naked flames and smoking are prohibited when handling coolant. WARNING: Coolant is toxic. Keep containers sealed and away from children. If coolant is accidentally consumed, seek medical help straight away. NOTE: The engine must be switched off before carrying out the coolant level check and top up process. 5.6 2. Slowly unscrew the cap by half a turn counter-clockwise and allow excess pressure to escape. 3. Unscrew the cap fully and remove it. 4. The coolant level is correct when it is between the lower and upper steps inside the filler neck. 5. Top up if necessary using only Mobil Antifreeze Extra. 6. Replace the cap by turning it clockwise to the stop. 7. Close the engine cover, see Engine cover, page 1.11. Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP Power steering fluid WARNING: Power steering fluid is highly flammable. Fire, naked flames and smoking are prohibited when handling power steering fluid. WARNING: Power steering fluid is toxic. Keep containers sealed and away from children. If fluid is accidentally consumed, seek medical help straight away. Right-hand drive models Checking fluid level 1. Switch the ignition on and start the engine. Select normal handling mode, see Handling control, page 2.25. 2. Allow the engine to idle for 20 seconds before checking the fluid level. 3. Open the luggage compartment, see Luggage compartment, page 1.15. 4. Turn the cap counter-clockwise and remove it. Left-hand drive models 5. Measure the distance, inside the reservoir, down to the fluid level. Maximum fill level is 1.97 in (50 mm) and minimum fill level is 2.17 in (55 mm) from the top of the filler neck. 6. Top up if necessary using only Pentosin CHF202 power steering fluid, contact your McLaren Retailer. 7. Replace the cap by turning it to the stop. 8. Close the luggage compartment, see Luggage compartment, page 1.15. 5.7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP Brake fluid WARNING: Brake fluid is highly flammable. Fire, naked flames and smoking are prohibited when handling brake fluid. WARNING: Brake fluid is toxic. Keep containers sealed and away from children. If fluid is accidentally consumed, seek medical help straight away. WARNING: Only use fluid from new, air tight containers. NOTE: Avoid spilling brake fluid, it is harmful to painted surfaces. Any spillages must be removed immediately with a mixture of car shampoo and water. NOTE: The engine must be switched off before carrying out the brake fluid check and top up process. Checking fluid level 1. Open the luggage compartment, see Luggage compartment, page 1.15. 5.8 Right-hand drive models Left-hand drive models 2. Unscrew the cap counter-clockwise and remove it. 3. The brake fluid is correct if the level just covers the base of the filter in the filler neck. 4. Top up if necessary using only new Pentosin DoT 5.1 brake fluid. 5. Replace the cap by turning it to the stop. 6. Close the luggage compartment, see Luggage compartment, page 1.15. Mclaren P11 - Complete.book Page 9 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FLUID TOPPING UP Windscreen washers WARNING: Some washer fluids are highly flammable. Fire, naked flames and smoking are prohibited when handling washer fluid. WARNING: Washer fluid is toxic. Keep containers sealed and away from children. If fluid is accidentally consumed, seek medical help straight away. Checking fluid level 1. Open the luggage compartment, see Luggage compartment, page 1.15. 2. Mix a solution of Mobil Screenwash concentrate and water in a container before adding to the reservoir. Concentration of the washer solution should be mixed to suit the outside temperatures. 4. Close the luggage compartment, see Luggage compartment, page 1.15. NOTE: McLaren recommends the use of Mobil Screenwash concentrate. NOTE: Add washer fluid to the reservoir all year round. The reservoir for the windscreen washers is located in the luggage compartment. The reservoir has a capacity of approximately 1 gallon. 3. Open the reservoir cap, top up the reservoir with washer fluid and close the cap. 5.9 Mclaren P11 - Complete.book Page 10 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN EMERGENCY EQUIPMENT EMERGENCY EQUIPMENT Emergency Equipment Safety Before using the emergency equipment, familiarize yourself with the following safety information. Luggage compartment equipment except 675LT Luggage compartment equipment 675LT WARNING: Always ensure the emergency equipment supplied is used in the proper manner and for the purpose it was designed. Always use the emergency equipment in a safe and responsible manner and be aware of other road users. 1. 2. 3. 4. 5. Warning triangle, page 5.11 First Aid kit, page 5.11 Tire sealant, page 5.12 Towing eye, page 5.12 Fuel funnel, page 5.12 NOTE: The towing eye and the fuel funnel are supplied fitted inside the first aid kit case. 5.10 1. 2. 3. 4. 5. 6. Warning triangle, page 5.11 First Aid kit, page 5.11 Tire sealant, page 5.12 Towing eye, page 5.12 Fuel funnel, page 5.12 Engine cover release tool - 675LT, page 5.13 NOTE: The towing eye, fuel funnel and the engine cover release tool are supplied fitted inside the first aid kit case. Mclaren P11 - Complete.book Page 11 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN EMERGENCY EQUIPMENT Warning triangle First Aid kit Setting up the warning triangle The warning triangle (1) is located at the front of the luggage compartment. Fold the legs (1) sideways from the bottom. Pull side reflectors (2) upwards to form a triangle and lock them at the top using pressstud (3). The first aid kit (2) is located at the front of the luggage compartment. NOTE: Check the expiry dates of the first aid kit materials every year, and replace them if necessary. Place the warning triangle at an appropriate distance from the vehicle to warn other traffic of a breakdown. 5.11 Mclaren P11 - Complete.book Page 12 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN EMERGENCY EQUIPMENT Tire sealant Towing eye Fuel funnel The tire sealant (3) is located at the front of the luggage compartment. The towing eye (4) is located inside the first aid kit case at the front of the luggage compartment. The fuel funnel (5) is located inside the first aid kit case at the front of the luggage compartment. For instructions on how to use the tire sealant, see Deflated tire, page 5.35. NOTE: Check the expiry date of the tire sealant every year, and replace if necessary. 5.12 NOTE: Your McLaren is equipped with a front towing eye mounting only. It is not possible to tow other vehicles. For information on installing the towing eye, see Towing eye and mounting, page 5.43. NOTE: Only use the fuel funnel when filling the vehicle with fuel from sources other than a fuel pump at a gas station. Do not use the fuel funnel when topping up coolant, engine oil or any other fluids in the vehicle. Mclaren P11 - Complete.book Page 13 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN EMERGENCY EQUIPMENT Engine cover release tool - 675LT Fire extinguisher The engine cover release tool (6) is located inside the first aid kit case at the front of the luggage compartment. The fire extinguisher is located at the front of the luggage compartment. Release the retaining strap and remove the fire extinguisher. To operate, follow the manufacturer’s instructions on the side of the fire extinguisher. NOTE: The fire extinguisher must be checked every year or it may fail in an emergency. Once the extinguisher is used it will have to be replaced. 5.13 Mclaren P11 - Complete.book Page 14 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN BATTERY CARE AND MAINTENANCE BATTERY CARE AND MAINTENANCE Battery safety NOTE: Your McLaren is fitted with a lithium ion battery. Only a lithium ion battery charger can be used on this type of battery. Contact your McLaren Retailer for more information. Before using the battery charger, familiarize yourself with the following safety information. Charging the battery WARNING: Before use, check that all cables are in good condition; do not use cables that are damaged. Ensure that all cables are kept away from sharp edges, are not pinched or trapped and are not close to hot surfaces or water. WARNING: The lithium ion battery fitted to your McLaren is sealed for life and no attempt should be made to break the battery seal to inspect the battery. Never charge a damaged battery. The battery must only be charged in a well ventilated area; the charger must never be covered or placed on the battery. WARNING: Leave a suitable lithium ion battery charger connected to the lithium ion battery and switched on during periods when your vehicle is not in regular use. This will help maintain and prolong the life of the battery. Do not place any metal objects on a battery. You could cause a short circuit and the battery could ignite. NOTE: To maintain your lithium ion battery in optimum condition, always leave the battery charger connected to the battery and switched on during periods when your vehicle is not in regular use. NOTE: Do not connect the battery charger to the interior accessory socket. Keep the charger out of reach of children at all times. Refer to the instructions supplied with the battery charger. The charger connects to the accessory socket in the luggage compartment. 5.14 Mclaren P11 - Complete.book Page 15 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN BATTERY CARE AND MAINTENANCE Boost starting from another vehicle Using booster cables WARNING: Ensure that both batteries are 12V and that the booster cables have insulated clamps and are approved for use with 12V batteries. WARNING: Do not connect positive (+) terminals to negative (-) terminals. WARNING: Take care when working near rotating parts of the engine. Ensure cables are kept well clear. NOTE: Do not use a 24V booster start system. These produce excessive voltage and can damage the vehicle's electrical system. NOTE: It is not possible to push or tow start a vehicle with a discharged battery. Boosting procedure 1. If a donor vehicle is to be used, park it so that the battery location is adjacent, but ensure the two vehicles do not touch. 2. Apply the parking brake and ensure that the transmission of both vehicles is set in neutral (or Park for vehicles with automatic transmission). 3. Switch off the ignition and all electrical equipment in both vehicles. NOTE: Before connecting booster cables ensure that the battery connections on the disabled vehicle are correct and that all electrical equipment has been switched off. 4. Open the luggage compartment and remove any items stowed inside. 5. Remove the finisher (1) from around the top of the luggage compartment liner. 6. Remove the two stowage nets (2). 7. Remove the carpet (3). NOTE: If using a donor vehicle, please allow it to have the engine running for a minimum of two minutes before trying to start the disabled vehicle. 5.15 Mclaren P11 - Complete.book Page 16 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN BATTERY CARE AND MAINTENANCE 15. Check that the cables are clear of any moving components and that all four connections are secure. 16. 17. 8. Remove the 7 screws (4) securing the side and the base luggage compartment liner. 9. Remove the 10 screws (5) securing the top edge of the luggage compartment liner. 10. Remove the luggage compartment liner. 5.16 11. Connect one end of the positive (+) booster cable to the positive (+) terminal on the donor vehicle's battery. 12. Connect the other end of the positive (+) booster cable to the positive (+) terminal on the disabled vehicle's battery (A). 13. Connect one end of negative (-) booster cable to the negative (-) terminal on the donor vehicle's battery. 14. Connect the other end of the negative (-) booster cable to the negative (-) terminal on the disabled vehicle's battery (B). 18. 19. 20. WARNING: Ensure that each connection is securely made and that there is no risk of the clips accidentally slipping or being pulled from the connection points/battery terminal - this could cause sparking, which could lead to fire or explosion. Start the engine of the donor vehicle and allow it to run for two minutes. The electrical system on the disabled vehicle should now be ready for the engine to be started. Start the engine of the disabled vehicle. Allow both vehicles to idle for two minutes. Switch off the donor vehicle. NOTE: Do not switch on any electrical circuits on the previously disabled vehicle until after the booster cables have been removed. Mclaren P11 - Complete.book Page 17 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN BATTERY CARE AND MAINTENANCE NOTE: If battery is fully discharged, or has been disconnected, it may be necessary to reset the windows, see Resetting the windows, page 4.3. If this does not resolve the issue, please contact your McLaren Retailer immediately. Disconnecting the cables WARNING: To avoid serious injury, use caution when removing the booster cables as the engine on the previously disabled vehicle will be running. You will be working close to components carrying high voltage, or may be hot. 1. Disconnect the booster cables in the reverse order to that used for connection. 2. Refit the luggage compartment liner and secure with the 17 screws. 3. Fit the stowage nets, the carpet and the top finisher. 4. Stow the contents removed from the luggage compartment. 5.17 Mclaren P11 - Complete.book Page 18 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FUSES FUSES Fuse replacement WARNING: Fuses protect the vehicle's electrical systems. The failure of any fuse will render the system it protects inoperative. Use replacement fuses of the same rating and type. Incorrect fuse ratings can overload a system and cause a fire or malfunction. Blown fuses should be replaced and no attempt should be made to repair a blown fuse. NOTE: Before removing a fuse, turn off all electrical equipment and switch off the ignition. Main fuse box There are three fuse boxes fitted to your McLaren. Fuse Box Location Main fuse box Behind a panel in the rear bulkhead, behind the lefthand seat. Secondary fuse box Below the dashboard on the passenger’s side. Battery fuse box On top of the Battery, in the luggage compartment, beneath the luggage compartment cover. Main fuse box access 1. To access the main fuse box: • pull the release strap and tilt the lefthand seat backrest forwards • if a racing seat is fitted, slide the racing seat forwards • if a fixed seat is fitted, the seat must be removed, contact your McLaren Retailer 5.18 Mclaren P11 - Complete.book Page 19 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FUSES 5. Fit the access panel by inserting the two upper retaining clips in the bulkhead and securing with the two lower clips. No. Amps Circuit protected F10 40 Roof Pump - Spider NOTE: If a replacement fuse does not solve the electrical problem, or it fails immediately, contact your McLaren Retailer. F11 40 Roof ECU - Spider F12 - - F13 5 Powertrain Chassis Control Unit F14 5 Engine Control Module F15 10 Relays F16 - - F17 3 Door Locking Switch F18 50 ECU Main Relay Control F19 30 Fuel Pump 2 F20 30 Seat Driver’s Main fuse box fuse specification chart 2. Release the two lower clips securing the panel to the bulkhead and remove the panel 3. Refer to the fuse specification chart on page 19 to determine which fuse protects the non-functioning electrical system. NOTE: A label identifying the fuses is attached to the inside of the access panel. 4. Remove the appropriate fuse and replace it with a fuse of the same value as the original. If in doubt, check the fuse specification chart. No. Amps Circuit protected F1 60 Secondary Air Pump F2 60 Secondary Air Pump - 675LT F3 - - F4 - - F5 30 Powertrain Chassis Control Unit F6 30 Powertrain Chassis Control Unit F21 30 Seat Passenger’s F22 30 Fuel Pump 1 F7 30 Starter F23 5 Tilt and Microwave Sensor F8 20 Heated Rear Window except 675LT F24 - - F9 30 Audio Amplifier F25 10 Driver’s/Passenger’s Door Latch 5.19 Mclaren P11 - Complete.book Page 20 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FUSES No. Amps Circuit protected No. Amps Circuit protected No. F26 10 ICPC F40 10 Engine Ancillaries R54 - F27 5 Electronic Park Brake R41 - - Powertrain Chassis Control Unit F28 - - R42 - Vacuum Pump relay R55 - Starter F29 20 Vacuum Pump R43 - Vacuum Pump relay R56 - Secondary Air Pump F30 - - R44 - R57 - Cooling Fans F31 50 Cooling Fan Left-Hand Heated Rear Window except 675LT R58 - ECU Main relay Control F32 50 Cooling Fan Right-Hand F45 10 Electrical Thermostats, Camshaft Actuators F33 30 Electronic Park Brake Motor Left-Hand F46 - - F34 30 Electronic Park Brake Motor Right-Hand F47 - - F48 - - F35 - - F49 - - F36 20 Battery Main Relay R50 - Fuel Pump 1 F37 15 Emission Control Systems R51 - - F38 15 Fuel Injection and Ignition Left-Hand Bank R52 - Fuel Pump 2 F39 15 Fuel Injection and Ignition Right-Hand Bank R53 - Powertrain Chassis Control Unit 5.20 Amps Circuit protected Mclaren P11 - Complete.book Page 21 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FUSES Secondary fuse box Secondary fuse box access 1. Access to the secondary fuse box is gained by lowering the closing panel below the dashboard on the passenger’s side. 2. Remove the two front screws (1). 3. Remove the side fixing clip (2). NOTE: If you wish to lower the closing panel fully, also remove the two clips at the rear (3). 4. Lower the closing panel, sufficiently to gain access to the fuse box. NOTE: Do not lower the closing panel further than necessary as it could be damaged. 5. Remove the appropriate fuse and replace it with a fuse of the same value as the original. If in doubt, check the fuse specification chart. 6. Raise the closing panel into position, fit the clip and fit and tighten the two front screws. Secondary fuse box fuse specification chart No. Amps Circuit protected F1 20 Driver's door F2 20 Passenger's door F3 25 Lights F4 20 Lights F5 35 Body F6 35 Body F7 35 Alarm F8 5 Electronic Stability Control F9 10 OBD2 Diagnostics F10 10 Air conditioning F11 3 Alarm Control Unit F12 3 Tracker F13 7.5 Alarm F14 10 Instrument cluster 5.21 Mclaren P11 - Complete.book Page 22 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FUSES Battery fuse box Battery fuse box access 1. Open the luggage compartment lid and remove any items stowed inside. 2. Remove the finisher (1) from around the top of the luggage compartment liner. 3. Remove the two stowage nets (2). 4. Remove the carpet (3). 5.22 5. Remove the 7 screws (4) securing the side and the base luggage compartment liner. 6. Remove the 10 screws (5) securing the top edge of the luggage compartment liner. 7. Remove the luggage compartment liner. 8. Press the 2 catches on the right-hand side of the cover and remove the cover from the fuse box. Mclaren P11 - Complete.book Page 23 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN FUSES Battery fuse box fuse specification chart 9. Remove the appropriate fuse and replace it with a fuse of the same value as the original. If in doubt, check the fuse specification chart. 10. Engage the left-hand side of the cover with the fuse box, and push the righthand side down to fully engage the clips. 11. Refit the luggage compartment liner and secure with the 17 screws. 12. Fit stowage nets, carpet, and top finisher. 13. Stow the contents removed from the luggage compartment. No. Amps Circuit protected 1 - - 2 - - 3 30 Air Conditioning - Motor Control Module 4 50 Secondary Fuse Box Supply 5 20 Electronic Stability Control valves 6 40 Electronic Stability Control motor 7 20 Auxiliary Power Socket Luggage Compartment 8 40 Secondary Fuse Box Supply 9 100 Electro Hydraulic Power Assisted Steering 10 200 Main Fuse Box Supply 11 - - 5.23 Mclaren P11 - Complete.book Page 24 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN LIGHTING LIGHTING Vehicle lights Lighting is an important aspect of vehicle safety. You must therefore ensure that all lights are working at all times. All the external lights on your McLaren use the latest Light Emitting Diode technology. Unlike traditional filament bulbs, these lights have a long life and low power consumption while providing the same amount of illumination. Headlamps Your McLaren is fitted with Light Emitting Diodes headlamps. These provide greater visibility on both lo and hi beams, especially during adverse weather and driving conditions. NOTE: Do not attempt to change Light Emitting Diodes yourself, as you could damage the vehicle lighting systems. Have faulty lights rectified by your McLaren Retailer. 5.24 Mclaren P11 - Complete.book Page 25 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN MANUAL UNLOCKING AND OPENING MANUAL UNLOCKING AND OPENING Unlocking - discharged battery If you are unable to lock or unlock the vehicle because the vehicle battery or key fob battery has become discharged, use the mechanical key. Unlocking and opening procedure NOTE: In the event of an extremely low state of battery charge, the windows will lower slightly so that the left-hand door can be opened with the manual key. The alarm system will be disarmed to prevent the alarm sounding. 1. Press release catch and remove the mechanical key from the key fob. 2. The mechanical lock is located below the door on the sill panel, underneath a removable panel. 3. Remove the panel by placing your fingers in the recess and pulling outwards. NOTE: The panel is not tethered to the vehicle and can be removed completely. Ensure that the panel is stored safely and cannot be damaged when the mechanical key is used. 5.25 Mclaren P11 - Complete.book Page 26 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN MANUAL UNLOCKING AND OPENING Starting the vehicle 4. Insert the mechanical key into the lock and turn the key until mechanical resistance is preventing full release of the door. 5. Apply pressure to the latch area of the door (to counteract pressure of the door seals), and turn the key further to release the door NOTE: If the vehicle battery is discharged and if the windows have not lowered. Take care when opening or closing the door. Do not force the door open or closed, the door seals or window could be damaged. 6. Fit the mechanical key back into the key fob. NOTE: Unlocking the vehicle using the mechanical key will activate the antitheft system and may cause the alarm to sound. Once the door is open, place the key fob on the section of the cup holder housing immediately behind the switch panel. within 10 seconds. The vehicle will recognize the key fob and stop the alarm from sounding. 7. If the key fob battery has become discharged, replace the battery at the earliest possible opportunity, see Replacing key fob battery, page 5.28. 8. Replace the cover panel. If the key fob battery has become discharged, and the engine will not start, place the key fob on the section of the cup holder housing immediately behind the switch panel. In this position the vehicle is able to sense the presence of the valid key fob and the vehicle can be started and driven. Replace the key fob battery at the earliest possible opportunity, see Replacing key fob battery, page 5.28. 5.26 Mclaren P11 - Complete.book Page 27 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN MANUAL UNLOCKING AND OPENING Door opening from inside - discharged battery NOTE: Please ensure that both of the retainers on the manual door release strap are fitted correctly, and in the correct positions on the B-Pillar after use. NOTE: Please ensure that the manual door release strap is fully retracted before fitting the retainers to their BPillar locations. To release a door from inside, release the manual door release strap retainer and pull the strap. The door latch will then release, allowing the door to be partially raised before it automatically swings outwards and upwards. To refit the release strap, feed the strap into its holder and snap the retainers into place. NOTE: Only use this strap when the battery has become discharged. 5.27 Mclaren P11 - Complete.book Page 28 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN MANUAL UNLOCKING AND OPENING Opening luggage compartment discharged battery The key fob or luggage compartment button on the center console will not release the luggage compartment if the battery is discharged or disconnected. In the event of this use the manual release mechanism. Replacing key fob battery Opening procedure 1. Pull the handle in the left-hand door aperture. 2. The luggage compartment will unlock and open slightly. 3. Release the safety latch and open the luggage compartment. Fit a new key fob battery every 12 months. You can do this yourself, or entrust it to your McLaren Retailer. When the key fob battery is discharged, you will only be able to unlock the vehicle with the mechanical key. You will require a single CR2032 3V battery. WARNING: The battery contains toxic substances. If a battery is swallowed, contact a doctor immediately. ENVIRONMENTAL: Do not dispose of the battery with the household waste. Batteries contain toxic substances. Take the discharged battery to your McLaren Retailer or to a recycling point for used batteries. 5.28 Mclaren P11 - Complete.book Page 29 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN MANUAL UNLOCKING AND OPENING 1. Press the release catch and remove the mechanical key from the key fob. 2. Slide the button pad away from the key fob. 3. Remove the back cover from the key fob and remove the battery holder. 5.29 Mclaren P11 - Complete.book Page 30 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN MANUAL UNLOCKING AND OPENING 4. Remove the discharged battery from the battery holder and install a new battery ensuring that the polarity is correct. NOTE: Handle the battery as little as possible. Moisture and oil from fingers can affect battery life and cause corrosion of the contacts. Only hold the battery on the edges. 5. Fit the battery holder back into the key fob and replace the back cover. 6. Refit the button pad and the mechanical key. 5.30 Mclaren P11 - Complete.book Page 31 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN WASHERS AND WIPER WASHERS AND WIPER Replacing the wiper blade WARNING: Ensure the ignition is switched off before you replace the wiper blade. The windscreen wiper could be set in motion and injure you. To remove the wiper blade WARNING: Replace the wiper blade every twelve months or the windscreen will not be wiped properly. You may not be able to observe the road and traffic conditions as a result and could cause an accident. 1. Press the STOP/START button twice to switch the ignition on but DO NOT touch the brake pedal. 2. Move the wiper control stalk to its slow speed setting. 3. Wait until the wiper blade is at the top of its stroke then press the STOP/START button to switch the ignition off and park the wiper blade on the windscreen. NOTE: Do not raise the end of the wiper arm more than 12 inches (300 mm), dimension A from the windscreen as the washer jet components may be damaged. NOTE: Never open the luggage compartment lid when the wiper arm is positioned away from the windscreen. You could damage the luggage compartment lid and/or the wiper arm. Do not lower the wiper arm onto the windscreen without the wiper blade fitted. 4. Depress the clip and slide the wiper blade out from the arm. To install a new wiper blade 1. Slide the wiper blade onto the wiper arm and ensure that the clip engages in the arm. 2. Lower the wiper arm onto the windscreen. 5.31 Mclaren P11 - Complete.book Page 32 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN WHEELS AND TIRES WHEELS AND TIRES Wheels and tires WARNING: Have worn tires replaced in axle pairs and ensure the tires are fitted as specified. With worn tires, the driving stability of the vehicle will be adversely affected. Consult your McLaren Retailer if you have had new tires fitted for information on the appropriate bedding in time based on your driving style. • With new tires, avoid high speed cornering and excess speed. • Only have wheels and tires of the same type and make fitted. • Never use a tire which has been punctured and then repaired. • Only have tires of the correct size fitted. • Tires degrade over time due to the effects of ultraviolet light, extreme temperatures, high loads, and environmental conditions. It is recommended that tires are replaced every six years, or sooner if required. 5.32 McLaren recommends that you only use Pirelli summer or winter tires, See Wheel and tire sizes, page 6.12. and axle components. This could result in damage to the tires or the vehicle. These tires provide the best possible performance in conjunction with the safety systems on your vehicle and have been specifically approved by McLaren. NOTE: Retreaded tires must not be used. Do not fit used tires if you have no information about their previous usage. McLaren cannot accept any responsibility for damage that may result from use of other tires and wheels. Further information about wheels and tires can be obtained from your McLaren Retailer. WARNING: Using tires other than those which have been recommended by McLaren, may contact the body work and adversely affect the handling. This may cause loss of vehicle control. Noise levels and fuel consumption may also be adversely affected. In addition, when driving with a load or when using snow traction devices, they could cause contact between the bodywork NOTE: Modification to the brake system and wheels is not permitted, nor is the use of spacer plates or brake dust shields. Any such modifications will invalidate the vehicle warranty on the area modified. NOTE: A wheel change must be carried out at your McLaren Retailer. The vehicle could be damaged if it is jacked up incorrectly. NOTE: Store tires in a cool, dry place, preferably in the dark. Protect the tires from oil, grease and petrol. Mclaren P11 - Complete.book Page 33 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN WHEELS AND TIRES Tire markings 1. Width of tire in millimeters 2. Tire profile given as percentage of tire width. 3. Indicates that the tire is radial ply. 4. Indicates the diameter of the wheel rim in inches. 5. The numbers denote load index and the letter indicates the speed rating. 91 indicates a weight of 1,350 lbs (615 kg) and Y indicates speeds over 186 mph (300 kph). 6. Displays the maximum load which can be carried by the tire 7. Wear rate indicator. The higher the figure the longer a tire will last. 8. The alpha character denotes resistance to heat. An 'A' rated tire offers most heat resistance. 9. Information about the manufacture of the tire. Contains place and date of manufacture. Regularly check the tire tread depth and the condition of the tread across the whole width of the tire. Turn the front wheels to full lock in order to inspect the inner tread. Tires WARNING: Only tires recommended by McLaren are to be fitted to the vehicle. WARNING: The tires must be mounted according to the labeling on the tire wall. Inspecting wheels and tires At least every 14 days, check the tires for cuts, punctures, tears, bumps, deformation and cracks. Check wheels for severe corrosion. Damaged wheels could cause a loss of tire pressure. When the tread is worn to 1.6 mm, the wear indicators appear on the surface of the tread pattern, producing a continuous band of rubber across the width of the tire. Tires must be replaced as soon as the wear indicator becomes visible, or sooner if legislation dictates replacement at a greater tread depth. 5.33 Mclaren P11 - Complete.book Page 34 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN WHEELS AND TIRES NOTE: It is recommended that you always have your tires replaced by your McLaren Retailer. If Tire Pressure Monitoring System (TPMS) is fitted, each wheel has a tire pressure sensor connected to the tire valve. In order to avoid damage to the sensor, the tires must be replaced using the correct procedure. WARNING: Tire grip decreases rapidly on wet or icy roads, particularly when the tread depth is close to the minimum. You could lose control of the vehicle and cause an accident due to the reduced grip of the tires. Reduce your speed and drive with greater care. NOTE: If tread wear is uneven across the tire, or becomes excessive, the wheel alignment should be checked. Regularly check the pressure of all your tires and correct the pressure as necessary, see Tire pressures, page 5.34. All wheels must have a valve cap fitted to protect the valve against dirt and moisture. 5.34 Driving precautions When parking your McLaren, ensure that the tires do not contact the kerb or other obstacles. If it is necessary to drive over kerbs, speed humps or potholes, drive slowly and at a shallow angle or the tires could be damaged. While driving, pay attention to vibrations, noises and unusual handling characteristics, e.g. pulling to one side. This may indicate that the tires or wheels are damaged. If you experience anything unusual, reduce your speed and stop the vehicle as soon as safety permits to check the tires and wheels for damage. If you find no signs of damage, have the tires and wheels inspected at your McLaren Retailer. Tire pressures WARNING: Tire pressure that is too high or too low has a negative effect on the vehicle's active safety, this could lead to an accident. Frequently check the pressure of all tires, particularly prior to long trips, and correct the pressure as necessary. WARNING: If the pressure in a tire drops repeatedly, inspect the tire for foreign objects or signs of punctures, check the valve for air leaks. Mclaren P11 - Complete.book Page 35 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN WHEELS AND TIRES Deflated tire For the tire pressures for various operating conditions, see Tire pressures, page 6.12. They are also printed on a label attached to the fuel filler flap. If the vehicle is to be driven at high speeds, the tire pressure must be checked, and if necessary adjusted. NOTE: In some markets, the tire pressure label is attached to the driver's sill panel. NOTE: Tire pressures given for low loads are minimum values which offer optimum ride comfort. Increased pressures for higher loads will not adversely affect the running of the vehicle, but ride comfort will be impaired. Check the pressures when the tires are cold. If it is necessary to check the tires when they are warm, pressures will be higher. Do not let air out of warm tires to match the recommended cold tire pressures. Driving with tire pressure that is too high or too low can: • create a risk of tire failure with resultant accidents, causing injury or death • shorten the life of the tires • cause increased tire damage • have a negative effect on handling characteristics (e.g. by causing aquaplaning) ENVIRONMENTAL: Check tire pressures at least every 14 days. Interchanging wheels WARNING: Only approved wheels with winter tires can be fitted to your McLaren as alternatives. Your McLaren is equipped with a can of tire sealant, which is located in the luggage compartment. In the event of a puncture, follow the steps below to ensure your safety and the safety of other vehicle occupants and other road users. Repairing a puncture 1. Stop the vehicle as far away as possible from traffic and on a firm and level surface. 2. If on a public highway, switch on the hazard warning lamps, see Hazard warning lamps, page 1.58. 3. Passengers should exit the vehicle safely and remain well away from the vehicle, the road and any traffic. 4. Apply the parking brake and select neutral. 5. Place the warning triangle at an appropriate distance from the vehicle to warn other traffic of a breakdown, see Warning triangle, page 5.11. 5.35 Mclaren P11 - Complete.book Page 36 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN WHEELS AND TIRES Using the tire sealant • you have driven at very low tire pressures or with deflated tires Contact your McLaren Retailer immediately. Remove the tire sealant from the luggage compartment and follow the instructions on the container. NOTE: If possible, locate the cause of the puncture and position the wheel so the puncture is at the lowest point to enable the sealant to be more effective. Have the punctured tire replaced as soon as possible. You can use the tire sealant to seal small punctures, particularly those in the tire's tread. The tire sealant can be used at ambient temperatures down to -4°F (-20°C). WARNING: The tire sealant is unable to seal punctures if: • there are cuts or punctures in the tire greater than 4 mm • the rims are damaged 5.36 WARNING: Have punctured tires replaced. McLaren do not recommend that punctured tires are repaired. WARNING: If the tire sealant comes into contact with your eyes or skin, immediately rinse thoroughly with clean water, change out of clothing which has been in contact with the tire sealant. If an allergic reaction occurs, contact a doctor immediately. WARNING: Keep the tire sealant out of reach of children. If tire sealant is swallowed, immediately rinse the mouth thoroughly and drink a large amount of water. Do not induce vomiting. Contact a doctor immediately. Do not inhale tire sealant fumes. NOTE: After using tire sealant, the tire valve, incorporating the Tire Pressure Monitoring System sensor, will have to be replaced. Mclaren P11 - Complete.book Page 37 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN WHEELS AND TIRES P ZeroTM Trofeo R tires Pirelli offer P ZeroTM Trofeo R tires approved for use on your McLaren. NOTE: P ZeroTM Trofeo R tires are standard on the 675LT. NOTE: P ZeroTM Trofeo R tires must be fitted with the Tire Pressure Monitoring System (TPMS). The driver’s skill level must be commensurate with the vehicle performance levels in the upper range limits due to increased safety risks. NOTE: Due to ultra high performance design and the particular manufacturing process of these tires, they must always be replaced in axle sets (Front and rear) regardless of wear or mileage. Failure to do so may have a negative affect on the handling characteristics of the vehicle. The main features of the P ZeroTM Trofeo R tires are a reduced tread depth and a special tread pattern and carcass compared with other tires. WARNING: Risk of accident from worn tires. P ZeroTM Trofeo R tires have a smaller tread depth, and thus can reach their wear limit sooner. It is important to check tire wear frequently to avoid risk of serious personal injury or death from worn tires. WARNING: Risk of accident through loss of road surface contact, control over the vehicle and braking ability, leading to serious personal injury or death. The reduced tire tread depth means that there is an increased risk of aquaplaning on wet roads. When driving on wet or mud-covered roads reduce speed significantly. NOTE: Notify anyone using your car of these characteristics and possible effects. 5.37 Mclaren P11 - Complete.book Page 38 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN VEHICLE CARE VEHICLE CARE Washing your McLaren ENVIRONMENTAL: Some cleaning products contain chemicals that are hazardous to the environment. Always take precautions to prevent fluids from spilling and never use excessive quantities. Hand washing your McLaren Prior to hand washing, lock the vehicle and place the key out of range (at least 9.8 feet (3 meters) or greater distance) to ensure that the doors do not open. NOTE: Do not wash the vehicle in direct sunlight or if it is hot to the touch, this may cause water marks and streaks. Do not wash the engine with hose pipe or pressure washer. Do not use household detergents, these products will discolor painted surfaces and remove protective wax finishes. 1. Pre-rinse the body thoroughly with a hose pipe held at a shallow angle to loosen any dirt and wet the paintwork ready for washing, avoiding direct spray on engine cover vents. 2. Prepare a bucket of warm water and a good quality car shampoo. Refer to the shampoo manufacturer's instructions for dilution ratios. 3. Working from the top of the vehicle down, wash the vehicle, ideally using a lambswool wash mitt rather than a 5.38 sponge, use generous quantities of water paying particular attention to areas where dirt can accumulate. Use one wash mitt for the top of the vehicle (roof, luggage compartment lid and areas above the wheel arch line) and a separate mitt for areas below the wheel arch line. NOTE: Do not clean the wheels with these wash mitts. NOTE: Do not allow the shampoo to dry, it will leave streaks on the paint work. 4. Tar spots and stubborn grease marks can be removed using white spirit or denatured alcohol. After cleaning, immediately wash the area with soapy water to remove all traces of spirit or alcohol. 5. Once the vehicle is clean, work from the top of the vehicle down and rinse the vehicle thoroughly using a hose pipe held at a shallow angle, avoiding direct spray on engine cover vents. 6. Dry the vehicle using a chamois leather or drying towel. Mclaren P11 - Complete.book Page 39 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN VEHICLE CARE NOTE: In case of signs of water in the engine bay, it is advised to drive the vehicle and warm the engine to operating temperature to dry off any excessive water from the engine. Washing the wheels NOTE: Wash the wheels frequently, do not allow brake dust to become ingrained in the wheel rim finish. Wash the wheels using warm water, a good quality car shampoo and a wheel brush or wash mitt that is used only on the wheels. Apply polish to non-satin finished wheels to assist in keeping them clean. NOTE: Never apply polish to satin finish wheels, this will result in localized glossy patches on the surface of the wheel. NOTE: Do not use acid based wheel cleaners as these can damage the wheel rim finish leading to corrosion. NOTE: Ensure the brakes are fully dried after the wheels have been cleaned before the vehicle is stored. Wiper blades and rubber seals Clean wiper blades and rubber seals using warm water and a good quality car shampoo only. Do not use petroleum or alcohol-based cleaners. Windscreen, windows and mirrors Regularly clean all windows inside and out using a window cleaning solution. An automotive glass cleaner is recommended. After washing the vehicle with car shampoo containing wax, clean the outside of the windscreen with glass cleaner. Do not use abrasive cleaning compounds as mirror glass is particularly susceptible to damage. Polycarbonate rear window - 675LT Regularly clean the polycarbonate rear window using water and a pH neutral detergent only. Satin carbon fiber Before cleaning satin carbon fiber, always test the cleaning solution on a concealed area. Use only detergent with water and a lint free cloth. Do not use abrasive cleaning products or polish. Underbody cleaning Salt used on roads to control snow and ice during the winter can collect on the vehicle's underbody, if this is not removed, corrosion can occur. During the winter months, regularly hose the underbody with water paying particular attention to the wheel arches and areas where dirt can accumulate. Polishing Occasionally polish the paint work using a good quality polish, following up with a protective wax. NOTE: Do not use cutting compound, color restoration products or polishes containing a harsh abrasive. These can scratch the surface and permanently damage the paint work. Paint damage and rectification Regularly inspect the paint work for damage. Any stone chips or deep scratches should be repaired as soon as possible. Contact your McLaren Retailer for advice. 5.39 Mclaren P11 - Complete.book Page 40 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN VEHICLE CARE Cleaning the interior NOTE: Your McLaren Retailer will be able to recommend products for cleaning the interior of your vehicle. Carpet and fabrics Before cleaning upholstery, always test the cleaning solution on a concealed area. Clean with diluted upholstery cleaner and a clean cloth. Leather Before cleaning leather, always test the cleaning solution on a concealed area. Clean with warm water and a non-detergent soap or a proprietary leather cleaner. Dry with a dry, clean, lint-free cloth. Do not use abrasive cleaning products or polish. Do not polish the upper surfaces of the dashboard. Polished surfaces are reflective and may interfere with the driver's view. Clean with diluted upholstery cleaner, then wipe with a damp cloth. 5.40 Carbon fiber Before cleaning visible carbon fiber, always test the cleaning solution on a concealed area. Clean with a propriety matt dashboard cleaner. Contact your McLaren Retailer for more information. Do not use abrasive cleaning products or polish. Alcantara® Dust the material with care. Moisten a soft cloth or a sponge with water, wring it thoroughly and run it over the whole Alcantara® material. Make sure not to wet it excessively; rinse the cloth or sponge and repeat as necessary. Leave the material to dry overnight. Once the material has dried, in order to restore the material, brush it delicately with a soft bristle brush. Seat belts Extend the belts and clean with warm soapy water only. Do not use any type of detergent or chemical cleaning product. Allow the belts to dry naturally while extended, preferably away from direct sunlight. Instruments and display screens Clean the instrument cluster using a damp cloth. Do not use abrasive cleaning products or polish. Mclaren P11 - Complete.book Page 41 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN RAISING THE VEHICLE RAISING THE VEHICLE Vehicle lifting points WARNING: Ensure the vehicle is correctly positioned on a jack or vehicle lift before raising the vehicle to a workable height. Always engage vehicle lift safety locks or use suitable stands to ensure your safety before working under the vehicle. Refer to the illustration, and labels on the vehicle, for correct lifting locations. Make this information available to any third parties who may be assisting in the recovery of your McLaren. NOTE: Lifting the vehicle at any other points will damage the vehicle. NOTE: Use a jack with a flat lifting platform and a rubber pad to protect the chassis from surface damage. Do not lift under a body panel. 5.41 Mclaren P11 - Complete.book Page 42 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN McLAREN ASSISTANCE McLAREN ASSISTANCE McLaren Assistance In the event of a breakdown If your McLaren is immobilized, do not attempt to make your own arrangements for assistance. In the event of a problem with your vehicle, contact your McLaren Retailer. If your McLaren Retailer is unavailable, contact the Roadside Assistance Operator who is available 24 hours a day, 7 days a week. Refer to your Service and Warranty documentation, this contains all the information you need. NOTE: The contact details of your Roadside Assistance Operator can be found in your Service and Warranty booklet. The McLaren Retailer or Roadside Assistance Operator will verify your identity and that of your vehicle, as well as determining your exact location. They will then discuss the problem with you and, with your agreement, determine the best solution. 5.42 Mclaren P11 - Complete.book Page 43 Friday, January 22, 2016 9:43 AM MAINTAINING YOUR McLAREN McLAREN ASSISTANCE Towing for recovery Your McLaren is equipped with a front towing eye mounting only. 3. Remove the towing eye, stow it in the luggage compartment and refit the cover to the towing eye mounting as soon as the vehicle has been recovered. NOTE: Do not tow the vehicle, doing so could damage the gearbox. The towing eye must only be used to winch the vehicle onto a trailer or transporter for recovery purposes. Do not use a rigid bar to tow the vehicle. Towing eye and mounting The towing eye is located at the front of the luggage compartment. 1. Remove the cover from the towing eye mounting in the front bumper. 2. Screw the towing eye clockwise into the mounting hole, ensuring that it is screwed in to the full extent of the thread. NOTE: To avoid damage to the towing eye and the vehicle, it is important to ensure that the towing eye is in full contact with the mating surface of the front structure. NOTE: A winch cable/strap must be secured to the towing eye only or the vehicle could be damaged. 5.43 Mclaren P11 - Complete.book Page 44 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 45 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 46 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY GENUINE McLAREN PARTS AND ACCESSORIES Overview.............................................................................................................. 6.2 VEHICLE IDENTIFICATION Vehicle identification number.................................................................... 6.3 DATA Overview.............................................................................................................. 6.4 Vehicle operating temperatures ............................................................... 6.4 Engine .................................................................................................................. 6.5 Maximum speeds in each gear................................................................... 6.7 Gear ratios........................................................................................................... 6.7 Vehicle dimensions - except 675LT......................................................... 6.8 Vehicle dimensions - 675LT........................................................................ 6.9 Vehicle weights.............................................................................................. 6.10 Wheel and tire sizes ..................................................................................... 6.12 Turning circle.................................................................................................. 6.12 Tire pressures................................................................................................. 6.12 SERVICE PRODUCTS, FLUIDS AND CAPACITIES Service products ........................................................................................... 6.13 Engine oil specification .............................................................................. 6.13 Fuel ..................................................................................................................... 6.13 Coolant.............................................................................................................. 6.14 Power steering fluid..................................................................................... 6.14 Brake fluid ........................................................................................................ 6.14 TECHNICAL GLOSSARY Technical glossary ........................................................................................ 6.15 6.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY GENUINE McLAREN PARTS AND ACCESSORIES GENUINE McLAREN PARTS AND ACCESSORIES Overview McLaren recommends that you only use genuine McLaren replacement parts and accessories. The use of non-genuine parts could have a detrimental effect on the vehicle's operation and safety. McLaren tests replacement parts and accessories, for reliability, safety and suitability. McLaren accepts no responsibility for the use of nongenuine parts on their vehicles, even if they have been independently approved. Ensure that any accessories are suitable for your McLaren. Accessories which constitute a modification to the vehicle could invalidate the vehicle's warranty. This applies if they: In many countries, replacement parts and accessories are only officially approved for installation if they comply with legal requirements. All genuine McLaren replacement parts and accessories meet these requirements. Always quote the vehicle identification number, you will find this on the vehicle identification plate, and in the bottom lefthand corner of the windscreen. Genuine McLaren parts and accessories can be obtained from your McLaren Retailer where the parts will be professionally fitted. 6.2 • change the vehicle type approved in the warranty • could endanger road users • adversely affect the vehicle's emissions and noise levels Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY VEHICLE IDENTIFICATION VEHICLE IDENTIFICATION Vehicle identification number VIN plate The vehicle identification number can be found on the bottom left-hand corner of the windscreen. The number can also be found engraved on the body behind the right-hand seat, stamped on a plate at the base of the driver's side B-post and viewed in the Vehicle Info section in the left-hand display, see Vehicle identification, page 3.20. The vehicle identification number plate also contains the following: • maximum permitted laden weight • maximum permitted laden weight including trailer • maximum permitted front axle laden weight • maximum permitted rear axle laden weight 6.3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA DATA Overview This section contains all the necessary technical data for your vehicle and applies to the vehicle's standard equipment. The data may therefore differ for vehicles with optional equipment. You can obtain further information from your McLaren Retailer. Vehicle operating temperatures Minimum ambient operating temperature -4°F (-20°C) Maximum ambient operating temperature +122°F (+50°C) NOTE: If the vehicle is used outside the minimum and maximum ambient temperatures, performance degradation may be experienced. McLaren disclaims any liability of the stated engine power not being achieved if the vehicle is being used outside of the stated temperature ranges or being used at altitude. 6.4 Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Engine Engine - 650S Engine - 650S Rated output (kW) @rpm 478 @ 7,250 Maximum engine speed (rpm) 8,500 Rated output (PS) @rpm 650 @ 7,250 Power to weight ratio (PS/tonne) 500 - Coupe 485 - Spider Rated torque (Nm) @rpm 678 @ 6,000 [95% 3000-7000] Acceleration (0 to 100 kph) (s) Rated torque (lb-ft) @rpm 500 @ 6,000 [95% 3000-7000] 3.2 P ZeroTM tires (3.0 P ZeroTM Corsa tires) Number of cylinders 8 Acceleration (0 to 60 mph) (s) Displacement cm3 3,799 3.1 P ZeroTM tires (2.9 P ZeroTM Corsa tires) 6.5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Vehicle emission label Engine - 675LT Engine - 675LT Rated output (kW) @rpm 496 @ 7,100 Maximum engine speed (rpm) 8,500 Rated output (PS) @rpm 675 @ 7,100 Power to weight ratio (PS/tonne) 549 Rated torque (Nm) @rpm 700 @ 5,500-6,500 Acceleration (0 to 100 kph) (s) 2.9 P ZeroTM Trofeo R tires Rated torque (lb-ft) @rpm 516 @ 5,500-6,500 Acceleration (0 to 60 mph) (s) 2.8 P ZeroTM Trofeo R tires Number of cylinders 8 Displacement cm3 3,799 The vehicle emission label can be found permanently affixed to the underside of the engine cover. The label contains: • engine displacement; • a statement of compliance with the appropriate model year US EA regulations; • the exhaust emissions standard. 6.6 Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Maximum speeds in each gear Except 675LT Gear ratios 675LT 1st gear 3.981:1 1st gear (mph (kph)) 50 (80) 1st gear (mph (kph)) 50 (80) 2nd gear 2.613:1 2nd gear (mph (kph)) 77 (124) 2nd gear (mph (kph)) 77 (124) 3rd gear 1.905:1 3rd gear (mph (kph)) 106 (170) 3rd gear (mph (kph)) 106 (170) 4th gear 1.479:1 4th gear (mph (kph)) 137 (220) 4th gear (mph (kph)) 137 (220) 5th gear 1.161:1 5th gear (mph (kph)) 175 (282) 5th gear (mph (kph)) 175 (282) 6th gear 0.906:1 6th gear (mph (kph)) 208 (335) - Coupe 205 (331) - Spider 6th gear (mph (kph)) 205 (330) - Coupe 203 (326) - Spider 7th gear 0.686:1 Final drive 3.308:1 7th gear (mph (kph)) 193 (312) - Coupe 192 (309) - Spider 7th gear (mph (kph)) 193 (312) - Coupe 192 (309) - Spider 6.7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Vehicle dimensions - except 675LT A Vehicle length 14 ft 10 in (4,512 mm) B Wheelbase 8 ft 9 in (2,670 mm) C Rear overhang 2 ft 7 in (786 mm) D Front overhang 3 ft 6 in (1,056 mm) E Ground clearance 5 in (120 mm) 6.8 F Vehicle width (doors closed, including mirrors) 6 ft 11 in (2,093 mm) G Vehicle height (doors closed) 4 ft (1,199 mm) Coupe 4 ft (1,203 mm) Spider J Vehicle width (doors open at widest point) 10 ft 2 in (3,087 mm) K Vehicle height (doors open) 6 ft 3 in (1,892 mm) NOTE: All dimensions are approximate. Mclaren P11 - Complete.book Page 9 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Vehicle dimensions - 675LT A Vehicle length 14 ft 11 in (4,546 mm) B Wheelbase 8 ft 9 in (2,670 mm) C Rear overhang 2 ft 8 in (794 mm) D Front overhang 3 ft 7 in (1,082 mm) E Ground clearance 4 in (94 mm) F Vehicle width (doors closed, including mirrors) 6 ft 11 in (2,095 mm) G Vehicle height (doors closed) 3 ft 11 in (1,188 mm) Coupe 3 ft 11 in (1,192 mm) Spider J Vehicle width (doors open at widest point) 10 ft 5 in (3,154 mm) K Vehicle height (doors open) 6 ft 1 in (1,854 mm) NOTE: All dimensions are approximate. 6.9 Mclaren P11 - Complete.book Page 10 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Vehicle weights Weight - 650S Weight - 650S Dry weight (lbs (kg)) 2,932 (1,330) - Coupe 3,020 (1,370) - Spider Maximum gross vehicle weight (GVW) (lbs (kg)) 3,726 (1,690) - Coupe 3,852 (1,747) - Spider Maximum gross vehicle weight distribution - front axle (lbs (kg)) 1,603 (727) - Coupe 1,656 (751) - Spider Maximum gross vehicle weight distribution - rear axle (lbs (kg)) 2,123 (963) - Coupe 2,196 (996) - Spider Maximum load luggage compartment (lbs (kg)) 110 (50) - Coupe 110 (50) - Spider Maximum load Tonneau stowage area (lbs (kg)) 66 (30) - Spider only Unladen weight (all fluids and 90% fuel) (lbs (kg)) 3,148 (1,428) - Coupe 3,236 (1,468) - Spider Kerb weight (plus 75 kg driver) (lbs (kg)) 3,313 (1,503) - Coupe 3,401 (1,543) - Spider Kerb weight distribution - front axle (lbs (kg)) 1,338 (607) - Coupe 1,360 (617) - Spider Kerb weight distribution - rear axle (lbs (kg)) 1,810 (821) - Coupe 1,876 (851) - Spider 6.10 Mclaren P11 - Complete.book Page 11 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Weight - 675LT Weight - 675LT Dry weight (lbs (kg)) 2,711 (1,230) - Coupe 2,800 (1,270) - Spider Maximum gross vehicle weight (GVW) (lbs (kg)) 3,519 (1,596) - Coupe 3,607 (1,636) - Spider Maximum gross vehicle weight distribution - front axle (lbs (kg)) 1,638 (743) - Coupe 1,665 (755) - Spider Maximum gross vehicle weight distribution - rear axle (lbs (kg)) 1,881 (853) - Coupe 1,942 (881)- Spider Maximum load luggage compartment (lbs (kg)) 110 (50) - Coupe 110 (50) - Spider Maximum load Tonneau stowage area (lbs (kg)) 66 (30) - Spider only Unladen weight (all fluids and 90% fuel) (lbs (kg)) 2,928 (1,328) - Coupe 3,016 (1,368) - Spider Kerb weight (plus 75 kg driver) (lbs (kg)) 3,093 (1,403) - Coupe 3,181 (1,443) - Spider Kerb weight distribution - front axle (lbs (kg)) 1,237 (561) - Coupe 1,263 (573) - Spider Kerb weight distribution - rear axle (lbs (kg)) 1,691 (767) - Coupe 1,753 (795) - Spider 6.11 Mclaren P11 - Complete.book Page 12 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY DATA Wheel and tire sizes Tire pressures Wheel sizes Winter tires Front wheels 8.5J x 19 Front tires Rear wheels 11J x 20 - Pirelli SottoZeroTM 3 Summer tires Rear tires Front tires - Pirelli SottoZeroTM 3 - Pirelli P Zero MC1 235/35 R19 - Pirelli P Zero Corsa MC1 except 675LT 235/35 R19 - Pirelli P ZeroTM Trofeo R 235/35 R19 TM TM 305/30 R20 Turning circle Except 675LT Turning circle kerb-to-kerb Rear tires - Pirelli P ZeroTM MC1 305/30 R20 - Pirelli P ZeroTM Corsa MC1 except 675LT 305/30 R20 - Pirelli P ZeroTM Trofeo R 305/30 R20 6.12 235/35 R19 41 ft (12.3 meters) 675LT Turning circle kerb-to-kerb 47 ft (14.2 meters) The tire pressures are given below and can also be found on a label on the underside of the fuel filler flap. Loading condition Front wheels Rear wheels Bar Psi Bar Psi Normal use 2.0 29 2.2 32 Speeds over 165 mph (270 kph) 2.6 38 2.8 41 Mclaren P11 - Complete.book Page 13 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY SERVICE PRODUCTS, FLUIDS AND CAPACITIES SERVICE PRODUCTS, FLUIDS AND CAPACITIES Service products Service products are fuel, engine oil, coolant and brake fluid. McLaren recommends that you only use products tested and approved for McLaren. Damage resulting from using non-approved service products is not covered by the liability for material defects. WARNING: When handling, storing and disposing of any service products, please observe the relevant regulations. Failure to do so could endanger people and the environment. Do not allow service products to come into direct contact with your eyes or open wounds. Contact a doctor immediately if any service product is swallowed. ENVIRONMENTAL: Dispose of service products in an environmentally responsible manner. Engine oil specification Engine oil capacity Fuel 8.0 litres NOTE: McLaren recommends only Mobil 1 New Life 0W-40 engine oil. You may obtain further information from your McLaren Retailer. NOTE: Do not use any lubricant additives. These could lead to increased wear and damage to the mechanical assemblies. Damage caused by additives, which are not approved, is not covered by the McLaren warranty. WARNING: Fuel is highly flammable. Fire, naked flames and smoking are therefore prohibited when handling fuels. Switch off the engine before refuelling. WARNING: Do not allow fuel to come into contact with skin or clothing. Allowing fuels to come into direct contact with your skin or inhaling fuel vapors is damaging to your health. For more information about fuel, see Recommended fuel, page 2.60. Fuel tank Total capacity 19 gal. (72 litres) Capacity remaining when low level lamp illuminates 2.9 gal. (11 litres) 6.13 Mclaren P11 - Complete.book Page 14 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY SERVICE PRODUCTS, FLUIDS AND CAPACITIES Coolant Power steering fluid Cooling system capacity 6.9 gal. (26.0 litres) Antifreeze/corrosion inhibitor Mobil Extra Antifreeze Antifreeze quantity for protection to -4°F (-20°C) 3.4 gal. (13.0 litres) The coolant is a mixture of water, antifreeze and corrosion inhibitor. It performs the following functions in the cooling system: • antifreeze protection • increased efficiency of the cooling system • offers anti-corrosion protection NOTE: Use Mobil Extra Antifreeze in all climates, all year round. If coolant is not used, the cooling system will not be sufficiently protected from corrosion and the cooling system efficiency will be reduced. 6.14 NOTE: To prevent damage to the engine, only top up with a pre-mixed coolant that provides the desired level of antifreeze protection. If antifreeze/corrosion inhibitor is present in the correct concentration, the boiling point of the coolant will be around 266°F (130°C). The antifreeze and corrosion inhibitor concentration in the cooling system should be approximately 50% ±5%. This will protect the cooling system against freezing in temperatures of -40°F (-40°C). The antifreeze and corrosion inhibitor concentration in the cooling system should not exceed 55%, which provides antifreeze protection down to -49°F (-45°C), as a higher concentration will not dissipate heat so effectively. If the vehicle is losing coolant, do not drive your vehicle and contact your McLaren Retailer. Only use Pentosin CHF202 power steering fluid. Brake fluid Only use Pentosin DoT 5.1 Brake fluid. Over a period of time, the brake fluid absorbs moisture from the air, this reduces its boiling point. WARNING: If the boiling point of the brake fluid is reduced too much, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving downhill or track driving) impairing the braking efficiency. Therefore, have the brake fluid replaced at the recommended service intervals. Mclaren P11 - Complete.book Page 15 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY TECHNICAL GLOSSARY TECHNICAL GLOSSARY Technical glossary Active dynamics control A system that allows the driver to change the handling and performance characteristics of the vehicle. Airbrake The Airbrake is a movable wing that enhances the vehicle's driving stability and braking performance by increasing rear downforce. Anti-lock Braking System The Anti-lock Braking System prevents the wheels from locking when you brake. This allows the vehicle to be steered during braking maneuvers. Automatic Driver Recognition cards A card which must be on the person entering the vehicle or the Tracker system signals that the vehicle is being moved without authorization. Brake assist system Brake assist system operates in emergency braking situations. If you depress the brake pedal quickly, Brake assist system automatically increases the force being applied to the brakes and thus shortens the stopping distance. Brake disc wiping Brake disc wiping operates when the windscreen wiper is switched on. It prevents moisture build up on the brake discs during periods of heavy rain, by applying the brakes momentarily, so that the pads touch the discs. Brake steer Brake steer offers the benefits of a torque vectoring differential, but is integrated into the braking system reducing weight and providing excellent speed of response. If the system detects that the car is starting to understeer through a corner, the inside rear brake is gently applied. This helps to increase the yaw rate of the car, making the car feel more resistant to understeer. The lateral ‘g’ force is also increased giving better handling characteristics. If the driver uses too much throttle exiting a corner, the inside rear wheel increases speed, which without brake steer could cause the car to become unstable. In this situation, brake steer will again gently apply the brake on the inside rear wheel, thereby restoring traction and stability. Cylinder cut When calling for an upshift at moderate engine speeds under hard acceleration within Sport powertrain mode, the number of firing engine cylinders are cut to rapidly decrease the engine torque and engine speed allowing faster upshifts to be achieved. This will make the upshift more audibly noticeable than a normal upshift. This also occurs in Track powertrain mode, but at high engine speeds it is replaced by inertia push. See Inertia push, page 6.16. Electronic brake pre-fill If the accelerator pedal is suddenly released, the electronic brake pre-fill function immediately brings the brake pads into contact with the discs, making for more rapid braking. 6.15 Mclaren P11 - Complete.book Page 16 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY TECHNICAL GLOSSARY Electronic Stability Control ESC monitors driving stability and traction between the tires and the road surface. Global Positioning System By means of the appropriate receivers, satellite signals supply information on the geographical position of the vehicle. These signals are compared with a digital map and used both to determine the position of the vehicle and for its route guidance. Handling control The handling control switch affects the following vehicle characteristics: • Roll stiffness • Adaptive damping • ESC settings Hill hold control Hill hold control prevents roll-back on hill starts. The brake system automatically applies the brakes until the accelerator is pressed. 6.16 Inertia push Within Track powertrain mode when calling for an upshift at high engine speeds under hard acceleration, inertia push put simply delivers greater acceleration. Under normal driving conditions, outside of inertia push when maximum performance is not called for, the engine and transmission speeds are aligned for a smooth seamless upshift. However, with inertia push, the clutch holding the next gear is engaged with greater force and the engine speed is not allowed to decrease fully, therefore utilizing the inertia of its internal rotating masses. This in turn provides a torque impulse as the gear is engaged aiding acceleration and maximizing performance. Launch control Launch control is designed to give the maximum acceleration performance from a standing start. Keyless Entry Keyless Entry allows the driver to unlock the vehicle and disarm the alarm by simply opening the door when the key is within 5 feet (1.5 meters) of the door sensors. Rear View Camera The Rear View Camera (RVC) is mounted in the center of the rear grille. The live video feed is displayed on the IRIS screen when the function is active. Parking sensors The parking sensor system comprises four ultrasonic sensors in the front bumper, four ultrasonic sensors in the rear bumper and two sounders. When the parking sensors detect an obstructions while maneuvering, the sounders provide an audible warning. Performance Shift Cue (PSC) - 675LT PSC is an audible shift indicator, which will sound to indicate that an upshift is required to maintain optimum performance. Mclaren P11 - Complete.book Page 17 Friday, January 22, 2016 9:43 AM VEHICLE DATA AND GLOSSARY TECHNICAL GLOSSARY Seamless Shift Gearbox The seamless shift gearbox is a 7 speed, dual clutch gearbox. Gear changes can be fully automatic or driver controlled. The gear changes are almost instantaneous. It is this coupled with uninterrupted torque delivery from the engine which provides the relentless acceleration. Typical vehicle identification number = SBM11AAA5AW000001 Supplementary Restraint System System comprises a number of air bags which are automatically deployed in an accident to provide additional occupant protection. Tire Pressure Monitoring System Tire Pressure Monitoring System constantly checks the pressure and temperature in all four tires. It warns if the pressure drops or the temperature rises in one or more of the tires. Vehicle Identification Number The vehicle identification number is a unique 17 digit number which provides information about your vehicle, as well as when and where it was built. 6.17 Mclaren P11 - Complete.book Page 18 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 19 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 20 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 1 Friday, January 22, 2016 9:43 AM INDEX INDEX A Accelerator pedal position ............................ 2.20 Accessories ............................................................6.2 Active dynamics panel .................................... 2.24 active button .................................................. 2.25 handling control ........................................... 2.25 launch control ............................................... 2.30 powertrain control ....................................... 2.27 winter mode ................................................... 2.29 Active speed limiter ......................................... 2.55 setting an upper speed limit .................... 2.55 Air bags .................................................................. 1.42 child passengers ........................................... 1.48 deployment .................................................... 1.46 front air bags .................................................. 1.44 knee air bags .................................................. 1.45 occupant classification system .............. 1.45 Out Of Position (OOP) testing ................. 1.47 replacement of air bags ............................. 1.43 side head air bags ......................................... 1.44 system modification ................................... 1.43 Air conditioning ....................................................4.4 air distribution ..................................................4.9 air recirculation mode ................................ 4.10 air vents ...............................................................4.9 automatic mode ..............................................4.5 blower speed .....................................................4.8 calibration ....................................................... 4.11 controls ...............................................................4.4 demisting ............................................................4.9 driver’s air conditioning controls ..............4.4 manual mode ....................................................4.6 MONO mode .....................................................4.6 passenger’s air conditioning controls .....4.5 switching on/off ..............................................4.5 temperature ......................................................4.7 Air conditioning (touchscreen controls) . 4.12 air conditioning controls ........................... 4.12 air distribution ............................................... 4.17 air recirculation mode ................................ 4.16 air vents ............................................................ 4.17 automatic mode ........................................... 4.13 blower speed .................................................. 4.16 calibration ....................................................... 4.18 controls ............................................................ 4.12 demisting ......................................................... 4.14 manual mode ................................................. 4.13 MONO mode .................................................. 4.13 switching on/off ........................................... 4.14 temperature ................................................... 4.15 Air distribution - air conditioning ...... 4.9, 4.17 Air recirculation mode - air conditioning ...................................4.10, 4.16 Air vents ...................................................... 4.9, 4.17 Airbrake ................................................................. 2.44 manual test ..................................................... 2.47 Alarm ...................................................................... 1.27 arming ............................................................... 1.27 disarming ......................................................... 1.27 panic .................................................................. 1.59 Anti-lock Braking System ............................... 2.34 Anti-trap protection - windows .......................4.3 Automatic light control .................................. 1.55 Automatic locking ............................................ 1.10 Automatic mode - air conditioning . 4.5, 4.13 Automatic mode - transmission ................. 2.20 Automatic wipe .................................................. 1.60 B Backlight ............................................................... 1.20 closing ............................................................... 1.21 opening ............................................................ 1.20 operation ......................................................... 1.20 Battery fuse box ................................................. 5.22 fuses .................................................................. 5.22 Battery replacement - key fob ..................... 5.28 Battery safety ...................................................... 5.14 Belts - seat ............................................................ 1.40 Blower speed - air conditioning ......... 4.8, 4.16 Boost starting ..................................................... 5.15 Brake assist system .......................................... 2.35 7.1 Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM INDEX Brake disc wiping ............................................... 2.35 Brake fluid ............................................................ 6.14 topping up ..........................................................5.8 Brake pedal .......................................................... 2.11 Brakes Anti-lock Braking System .......................... 2.34 Anti-lock Braking System warning light .................................................................... 2.35 bedding-in ....................................................... 2.56 brake assist system ..................................... 2.35 brake disc wiping .......................................... 2.35 brake steer ...................................................... 2.36 electronic brake pre-fill .............................. 2.36 foot ..................................................................... 2.11 hill hold control ............................................. 2.36 parking .................................................................2.9 warning light ................................................... 2.11 Brake-steer .......................................................... 2.36 Breakdown ........................................................... 5.42 Bulb replacement .............................................. 5.24 Bulkhead stowage net ..................................... 4.21 C Calibration - air conditioning ........... 4.11, 4.18 Camera .................................................................. 2.16 rear view ........................................................... 2.16 7.2 Capacities ............................................................. 6.13 cooling system .............................................. 6.14 engine oil ......................................................... 6.13 fuel tank ........................................................... 6.13 Car cover ............................................................... 4.26 Catalyst .................................................................. 2.15 high temperature ......................................... 2.15 Catalytic converter ........................................... 2.15 Changing wheels ............................................... 5.35 Checking engine oil ............................................5.2 Child passengers ............................................... 1.48 Child restraint system ..................................... 1.48 KISI child seat function .............................. 1.49 tether straps ................................................... 1.50 Cleaning ................................................................ 5.38 exterior ............................................................. 5.38 instruments and display screens ........... 5.40 interior .............................................................. 5.40 wheels ............................................................... 5.39 Clock ....................................................................... 3.25 Closing the backlight ....................................... 1.21 Closing the engine cover .................. 1.12, 1.14 Closing the luggage compartment ............ 1.16 Closing the roof ................................................. 1.19 Closing the windows ...........................................4.2 Coolant .................................................................. 6.14 topping up ..........................................................5.6 Copyright .................................................................... 3 Cover - engine ...........................1.11, 1.12, 1.13 closing .................................................. 1.12, 1.14 opening ...................................1.11, 1.12, 1.13 Cruise control .....................................................2.51 cancelling ........................................................2.52 decreasing speed .........................................2.53 increasing speed ...........................................2.53 resuming speed ............................................2.54 setting ...............................................................2.51 Cup holder ............................................................4.24 D Data ............................................................................6.4 Date display .........................................................3.25 Daytime running lamps ..................................1.57 Defrosting - air conditioning ............... 4.9, 4.14 Demisting - air conditioning ............... 4.9, 4.14 Deployment - air bags .....................................1.46 Dimensions ...................................................6.8, 6.9 Discharged battery ..............................................1.4 Discharged key fob battery ...........................5.28 starting the engine ......................................5.26 Display messages Coupe and Spider .........................................3.26 Spider only ......................................................3.30 Display screen cleaning ..................................5.40 Door mirror heating .........................................1.52 Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM INDEX Doors .........................................................................1.2 automatic locking ........................................ 1.10 closing from outside ................................... 1.10 locking .................................................................1.6 locking and unlocking from inside ...........1.8 manual opening from inside ................... 5.27 opening from inside .......................................1.9 opening from inside - discharged battery .............................................................. 5.27 opening from outside ....................................1.5 Drink holder ......................................................... 4.24 Driver’s air conditioning controls ..................4.4 Driving away ........................................................ 2.13 Driving in winter ................................................. 2.61 Driving precautions .......................................... 5.34 Driving safety systems .................................... 2.34 Dynamic ESC modes ....................................... 2.40 E Economical driving ........................................... 2.14 Electric seats ....................................................... 1.32 backrest rake adjustment ......................... 1.33 forward and rearward adjustment ......... 1.32 height adjustment ....................................... 1.33 lumbar adjustment ...................................... 1.34 Electric seats and mirror memory .............. 1.34 Electrical status ....................................................2.3 Electronic brake pre-fill .................................. 2.36 Electronic Stability Control ........................... 2.37 deactivating ........................................2.38, 2.40 dynamic modes ............................................ 2.40 reactivating .........................................2.39, 2.43 Emergency fuel filling funnel ....................... 5.12 Engine .................................................................... 2.11 immobilizer ..................................................... 1.28 power output ....................................................6.5 running in ........................................................ 2.56 starting ............................................................. 2.11 stopping ........................................................... 2.12 technical data ...................................................6.5 warning light .................................................. 2.14 Engine cover .............................. 1.11, 1.12, 1.13 closing ..................................................1.12, 1.14 opening ................................... 1.11, 1.12, 1.13 release tool ..................................................... 5.13 Engine oil .................................................................5.2 capacity ............................................................ 6.13 checking .............................................................5.2 level warnings ...................................................5.2 specification ................................................... 6.13 temperature warnings ..................................5.5 topping up ..........................................................5.3 usage ....................................................................5.2 Entry lighting ...................................................... 4.20 Equipment ........................................................... 5.10 luggage compartment ............................... 5.10 Exhaust .................................................................. 2.15 temperature monitoring ........................... 2.15 Exit lighting .......................................................... 4.21 Exterior lighting .....................................1.53, 1.54 Exterior mirrors .................................................. 1.51 heating ............................................................. 1.52 memory ............................................................ 1.34 mirror automatic fold ................................. 1.52 mirror fold ....................................................... 1.52 reverse dip ....................................................... 1.52 Extinguisher ........................................................ 5.13 Eye - towing ......................................................... 5.12 F Features 12V Socket ...................................................... 4.25 stowage compartment .............................. 4.23 stowage net .................................................... 4.21 sun visors ......................................................... 4.23 Filling with fuel ................................................... 2.58 Fire extinguisher ................................................ 5.13 First aid kit ............................................................ 5.11 Fluid - brake ......................................................... 6.14 topping up ..........................................................5.8 7.3 Mclaren P11 - Complete.book Page 4 Friday, January 22, 2016 9:43 AM INDEX Fluid - power steering ...................................... 6.14 topping up ..........................................................5.7 Foot brake ............................................................ 2.11 Force limiters - seat belts ............................... 1.41 Front air bags ...................................................... 1.44 Fuel ......................................................................... 2.58 funnel ................................................................ 5.12 level display ..................................................... 3.35 quality ............................................................... 2.60 safety ................................................................. 6.13 tank .................................................................... 6.13 Funnel - fuel ........................................................ 5.12 Fuse box main ................................................................... 5.18 secondary ........................................................ 5.21 Fuses ...................................................................... 5.18 battery fuse box ............................................ 5.22 main fuse box ................................................. 5.18 replacement ................................................... 5.18 secondary fuse box ...................................... 5.21 G Gear position indicator ................................... 3.33 Gear positions ........................................................2.7 Gear ratios ...............................................................6.7 Gear Shift Indicator .......................................... 2.14 7.4 Gearbox ................................................................. 2.19 gear positions ................................................ 2.19 gearshift paddles .......................................... 2.22 kickdown .......................................................... 2.20 modes ............................................................... 2.20 oil topping up ....................................................5.5 Gearbox mode indicator ................................. 3.25 Genuine McLaren parts and accessories ....6.2 Glossary - technical .......................................... 6.15 Ground clearance .................................................... 6 H Handling control ................................................ 2.25 Hazard warning lamps ..................................... 1.58 Headlamps ........................................................... 1.56 flasher ............................................................... 1.56 hi beam ............................................................. 1.56 Heated rear window ......................................... 4.11 Heated seats ....................................................... 1.36 Hi beam ................................................................. 1.56 Hill hold control ................................................. 2.36 Horn ........................................................................ 1.39 I Identification number - vehicle ......................6.3 Ignition - switching on ........................................2.4 Immobilizer .........................................................1.28 In gear speeds .......................................................6.7 Increasing vehicle ground clearance ........1.62 Increasing vehicle ride height ......................1.62 Individual unlock settings .................................1.8 Inspecting tires ..................................................5.33 Inspecting wheels .............................................5.33 Installing luggage bags ...................................1.24 Installing stowage bags ..................................1.25 Instruments ............................................................3.2 cleaning ............................................................5.40 clock ..................................................................3.25 display messages - Coupe and Spider ..3.26 display messages - Spider only ...............3.30 display window ..............................................3.33 fuel level display ............................................3.35 gear position indicator ...............................3.33 gearbox mode indicator ............................3.25 handling and powertrain display ............3.33 home screen .....................................................3.6 left-hand display ..............................................3.3 oil temperature display ..............................3.34 overview ..............................................................3.2 right-hand display ........................................3.33 settings ................................................................3.7 speedometer .....................................................3.2 tachometer ........................................................3.2 trip computer .................................................3.21 Mclaren P11 - Complete.book Page 5 Friday, January 22, 2016 9:43 AM INDEX vehicle info ..................................................... 3.17 vehicle lift ........................................................ 3.22 water temperature display ....................... 3.35 Interchanging wheels ..................................... 5.35 Interior accessory power socket ................ 4.25 Interior lighting .................................................. 4.20 courtesy lighting .......................................... 4.20 Interior mirror ..................................................... 1.51 Interior motion sensor .................................... 1.29 Introduction ...............................................................2 J Jacking the vehicle ........................................... 5.41 Journey trip .......................................................... 3.21 Jump starting ...................................................... 5.15 K Key fob .....................................................................1.2 entry .....................................................................1.2 stowing ................................................................1.4 Key fob battery replacement ....................... 5.28 Keyless entry ..........................................................1.2 Kickdown .............................................................. 2.20 Kit - first aid .......................................................... 5.11 Kit - tire repair ..................................................... 5.35 Knee air bags ...................................................... 1.45 L Lamps - side ........................................................ 1.56 Launch control ................................................... 2.30 Left-hand display ..................................................3.3 clock .................................................................. 3.25 home screen .....................................................3.6 messages - Coupe and Spider ................. 3.26 messages - Spider only .............................. 3.30 overview ..............................................................2.5 settings ................................................................3.7 trip computer ................................................. 3.21 vehicle info ..................................................... 3.17 vehicle lift ........................................................ 3.22 Lifting points - vehicle ..................................... 5.41 Light switch ......................................................... 1.55 Lighting ................................................................. 1.53 automatic control ........................................ 1.55 courtesy lighting ........................................... 4.20 day time running lamps ............................. 1.57 exterior .................................................1.53, 1.54 hazard warning .............................................. 1.58 headlamp flash .............................................. 1.56 hi beam ............................................................. 1.56 interior .............................................................. 4.20 lo beam ............................................................. 1.56 parking lights ................................................. 1.59 rear fog lamp .................................................. 1.57 sidelamps ........................................................ 1.56 switch ................................................................ 1.55 turn signals ..................................................... 1.58 Limphome ........................................................... 2.14 Lo beam headlamps ........................................ 1.56 Locking .....................................................................1.6 automatic ........................................................ 1.10 from inside .........................................................1.8 mislock ................................................................1.7 Lo-Jack vehicle tracking system ................. 4.19 Luggage compartment .................................. 1.15 closing ............................................................... 1.16 manual opening ............................................ 5.28 opening - discharged battery .................. 5.28 unlocking and opening .............................. 1.15 Luggage compartment equipment .......... 5.10 Luggage compartment internal release button ........................................1.16, 1.23 M Main fuse box ...................................................... 5.18 fuses .................................................................. 5.18 Main instruments overview ..............................2.5 Manual mode - air conditioning ........ 4.6, 4.13 Manual mode - transmission ........................ 2.20 Manual seat backrest adjustment .............. 1.31 7.5 Mclaren P11 - Complete.book Page 6 Friday, January 22, 2016 9:43 AM INDEX Manual seats ....................................................... 1.30 backrest rake adjustment ......................... 1.31 forward and rearward adjustment ......... 1.30 height adjustment ....................................... 1.31 Manual test - Airbrake ..................................... 2.47 Manual unlocking .............................................. 5.25 McLaren Assistance ......................................... 5.42 McLaren parts and accessories ......................6.2 Mirror ...................................................................... 1.51 automatic exterior mirror fold ................ 1.52 exterior ............................................................. 1.51 exterior mirror fold ....................................... 1.52 heating .............................................................. 1.52 interior .............................................................. 1.51 memory ............................................................ 1.34 reverse dip ....................................................... 1.52 Mislock ......................................................................1.7 MONO mode - air conditioning ......... 4.6, 4.13 Motion sensor - interior .................................. 1.29 O Odometer ................................................................3.6 Oil - engine ..............................................................5.2 capacity ............................................................ 6.13 checking .............................................................5.2 level .......................................................................5.2 level warnings ...................................................5.2 7.6 specification ................................................... 6.13 temperature display .................................... 3.34 temperature warnings ...................................5.5 top up ...................................................................5.3 Oil - gearbox ...........................................................5.5 Opening a door .....................................................1.5 from inside .........................................................1.9 from outside ......................................................1.5 Opening and closing the tonneau cover . 1.21 Opening and closing the vents .......... 4.9, 4.17 Opening the backlight .................................... 1.20 Opening the engine cover ....1.11, 1.12, 1.13 Opening the roof ............................................... 1.18 Opening the windows ........................................4.2 Operating temperatures - vehicle .................6.4 Outside temperature display ...........................3.6 Owner documentation ................................... 4.24 P Panic alarm .......................................................... 1.59 Parking brake .........................................................2.9 Parking lights ...................................................... 1.59 Parking sensors .................................................. 2.15 Parts ...........................................................................6.2 Passenger’s air conditioning controls .........4.5 Passenger’s footwell stowage net .............. 4.21 Passengers - child ............................................. 1.48 Performance Shift Cue ...................................3.14 Power output .........................................................6.5 engine ..................................................................6.5 Power steering fluid .........................................6.14 topping up ..........................................................5.7 Powertrain control ............................................2.27 Precautions - driving ........................................5.34 Pressures - tire ....................................... 5.34, 6.12 Products - service .............................................6.13 Puncture repair kit ............................................5.35 R Racing seats ........................................................1.31 adjustment ......................................................1.31 Rain sensor ..........................................................1.60 Ratios - gear ............................................................6.7 Reading lights .....................................................4.20 Rear fog lamp ......................................................1.57 Rear spoiler ..........................................................2.44 Rear View Camera .............................................2.16 Rear window heating .......................................4.11 Recirculation mode - air conditioning .................................. 4.10, 4.16 Recommended fuel quality ..........................2.60 Recovery of your vehicle ................................5.43 Refuelling .............................................................2.58 Removing and storing stowage bags ........1.26 Mclaren P11 - Complete.book Page 7 Friday, January 22, 2016 9:43 AM INDEX Replacing bulbs .................................................................. 5.24 fuse .................................................................... 5.18 key fob battery .............................................. 5.28 wiper blade ...................................................... 5.31 Restraint system ............................................... 1.42 child ................................................................... 1.48 KISI child seat function .............................. 1.49 supplementary .............................................. 1.42 tether straps ................................................... 1.50 Retractable roof ................................................. 1.17 safe operating temperatures .................. 1.17 Rev counter ............................................................3.2 Right-hand display ............................................ 3.33 display window .............................................. 3.33 fuel level ........................................................... 3.35 gear position indicator ............................... 3.33 handling and powertrain display ............ 3.33 oil temperature ............................................. 3.34 overview ..............................................................2.6 water temperature ...................................... 3.35 Roof ........................................................................ 1.17 closing .............................................................. 1.19 opening ............................................................ 1.18 Running in ............................................................ 2.56 S Safety ..................................................................... 1.40 air bag system modification .................... 1.43 air bags ............................................................. 1.42 air bags Out Of Position (OOP) ................ 1.47 battery .............................................................. 5.14 fuel ..................................................................... 6.13 mirrors .............................................................. 1.51 replacement of air bags ............................. 1.43 seat belts ......................................................... 1.40 seats .................................................................. 1.30 Sealant - tire ........................................................ 5.12 Seamless Shift Gearbox .................................. 2.19 gear positions ................................................ 2.19 gearshift paddles .......................................... 2.22 kickdown ......................................................... 2.20 mode ................................................................. 2.20 Seat belt warning light .................................... 1.42 Seat belts .............................................................. 1.40 force limiters .................................................. 1.41 safety ................................................................. 1.40 tensioners ....................................................... 1.41 wearing ............................................................. 1.41 Seats ....................................................................... 1.30 backrest - electric ........................................ 1.33 backrest - manual ........................................ 1.31 electric adjustment ..................................... 1.32 electric backrest rake adjustment ........ 1.33 electric forward and rearward adjustment ...................................................... 1.32 electric height adjustment ....................... 1.33 electric seat adjustment ........................... 1.32 electric seat and mirror memory ........... 1.34 electric seat lumbar adjustment ............ 1.34 heated seats ................................................... 1.36 manual adjustment ..................................... 1.30 manual backrest rake adjustment ........ 1.31 manual forward and rearward adjustment ...................................................... 1.30 manual height adjustment ....................... 1.31 racing seat adjustment .............................. 1.31 safety ................................................................. 1.30 Secondary fuse box .......................................... 5.21 fuses .................................................................. 5.21 Sensor .................................................................... 1.29 interior motion .............................................. 1.29 Sensors .................................................................. 2.15 parking .............................................................. 2.15 Service and Warranty ....................................... 4.24 Service products ............................................... 6.13 Setting up warning triangle .......................... 5.11 Settings - individual unlock ..............................1.8 Side head air bags ............................................. 1.44 Sidelamps ............................................................. 1.56 Slipping wheel pull away ................................ 2.32 7.7 Mclaren P11 - Complete.book Page 8 Friday, January 22, 2016 9:43 AM INDEX Snow chains ........................................................ 2.62 Snow socks .......................................................... 2.62 Specification - engine oil ............................... 6.13 Speedometer .........................................................3.2 Speeds - in gear ....................................................6.7 Spoiler .................................................................... 2.44 START/STOP button ...........................................2.4 Starting and driving .............................................2.3 foot brake ........................................................ 2.11 gear positions ...................................................2.7 gearshift paddles .............................................2.8 instruments and warning lights .................2.4 main instruments ............................................2.5 parking brake ....................................................2.9 starting the engine ...................................... 2.11 switching on the ignition .............................2.4 warning lights ...................................................2.6 Starting the engine .......................................... 2.11 discharged key fob battery ....................... 5.26 Steering column ................................................ 1.37 Steering wheel ................................................... 1.37 electrical adjustment .................................. 1.38 horn .................................................................... 1.39 manual adjustment ..................................... 1.37 Stopping the engine ........................................ 2.12 Stowage bags ..................................................... 1.24 installing ........................................................... 1.25 removing and storing ................................. 1.26 7.8 Stowage compartment/audio interface . 4.23 Stowage luggage ............................................... 1.24 Stowage net ........................................................ 4.21 Stowing the key fob ............................................1.4 Summer tires ...................................................... 6.12 Sun visors ............................................................. 4.23 Supplementary Restraint System .............. 1.42 Switch - lighting ................................................. 1.55 Switching air conditioning on/off .... 4.5, 4.14 Switching on the ignition ..................................2.4 Symbols ....................................................................... 5 T Tachometer ............................................................3.2 Technical data .......................................................6.4 engine ..................................................................6.5 Technical glossary ............................................ 6.15 Temperature - air conditioning ......... 4.7, 4.15 Temperature display ...........................................3.6 Tensioners - seat belt ...................................... 1.41 Tires ........................................................................ 5.33 inspecting ........................................................ 5.33 markings .......................................................... 5.33 monitoring system ...................................... 2.48 pressure monitoring ................................... 2.48 pressures ............................................ 5.34, 6.12 repair kit ........................................................... 5.35 sealant ...............................................................5.12 summer ............................................................6.12 temperature monitoring ...........................2.50 Trofeo R ............................................................5.37 winter ................................................................6.12 Tonneau cover ...................................................1.21 opening and closing ....................................1.21 Topping up ..............................................................5.2 brake fluid ...........................................................5.8 coolant .................................................................5.6 engine oil ............................................................5.3 gearbox oil ..........................................................5.5 power steering fluid ........................................5.7 windscreen washers .......................................5.9 Tow-away protection .......................................1.28 Towing ...................................................................5.43 eye ......................................................................5.12 Track driving .............................................................. 7 Track use ..............................................................2.57 Tracking system ................................................4.19 Traction control system .................................2.37 Triangle - warning .............................................5.11 Trip ..........................................................................3.21 Turn signals .........................................................1.58 Turning circle ......................................................6.12 Mclaren P11 - Complete.book Page 9 Friday, January 22, 2016 9:43 AM INDEX U W Unlocking - discharged battery ................... 5.25 Unlocking and opening the luggage compartment ....................................................................... 1.15 Unlocking from inside ........................................1.8 Upper speed limit .............................................. 2.55 setting ............................................................... 2.55 Warning - engine oil level ..................................5.2 Warning - engine oil temperature .................5.5 Warning light Anti-lock Braking System .......................... 2.35 brakes ............................................................... 2.11 engine ............................................................... 2.14 seat belt ............................................................ 1.42 Supplementary Restraint System .......... 1.47 Warning lights left-hand side ....................................................2.6 right-hand side .................................................2.7 Warning triangle ................................................ 5.11 Washers ....................................................................5.9 windscreen ........................................................5.9 Washing ................................................................. 5.38 exterior ............................................................. 5.38 wheels ............................................................... 5.39 Water temperature display ............................ 3.35 Wearing seat belts ............................................ 1.41 Weights ................................................................. 6.10 Wheel - steering ................................................. 1.37 electrical adjustment .................................. 1.38 manual adjustment ..................................... 1.37 Wheel sizes .......................................................... 6.12 V Vehicle dimensions ................................... 6.8, 6.9 Vehicle electrical status ....................................2.3 Vehicle identification number ........................6.3 Vehicle lift ............................................................ 1.62 operation ......................................................... 1.62 operation and instrument display ......... 3.22 Vehicle lifting points ........................................ 5.41 Vehicle operating temperatures ...................6.4 Vehicle speeds ......................................................6.7 Vehicle starting .................................................. 2.11 discharged key fob battery ...................... 5.26 Vehicle tracking ................................................. 4.19 Vehicle use .......................................................... 2.56 Vehicle washing ................................................. 5.38 Vehicle weights .................................................. 6.10 Vents ............................................................ 4.9, 4.17 Volumetric alarm .............................................. 1.29 Wheels ................................................................... 5.32 inspecting ........................................................ 5.33 interchanging ................................................ 5.35 Wheels and tires ................................................ 5.32 Window demisting - air conditioning ..................................... 4.9, 4.14 Windows ...................................................................4.2 anti-trap protection ........................................4.3 opening and closing .......................................4.2 Windscreen washers ...........................................5.9 Windscreen wiper .............................................. 1.60 rain sensor ....................................................... 1.60 single wipe ...................................................... 1.61 wash/wipe ....................................................... 1.61 Winter driving ..................................................... 2.61 Winter mode ....................................................... 2.29 Winter tires ........................................................... 6.12 Wiper blade replacement ............................... 5.31 7.9 Mclaren P11 - Complete.book Page 10 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 2 Friday, January 22, 2016 9:43 AM Mclaren P11 - Complete.book Page 3 Friday, January 22, 2016 9:43 AM CARS.McLAREN.COM