Hyundai - Venus - Owners Manual - 2023 - 2023

OWNER’S MANUAL Operation Maintenance Specifications All information in this Owner’s Manual is current at the time of publication. However, HYUNDAI reserves the right to make changes at any time so that our policy of continual product improvement may be carried out. This manual applies to all HYUNDAI models and includes descriptions and explanations of optional as well as standard equipment. As a result, you may find material in this manual that does not apply to your specific vehicle. Introduction CAUTION: MODIFICATIONS TO YOUR HYUNDAI Your HYUNDAI should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your HYUNDAI and may, in addition, violate conditions of the limited warranties covering the vehicle. Certain modifications may also be in violation of regulations established by the U.S. Department of Transportation and other federal or state agencies. TWO-WAY RADIO INSTALLATION Your vehicle is equipped with a Tire Pressure Monitoring System, Passenger Occupant Classification System and other CAN bus systems. It is possible for an improperly installed/adjusted high powered two-way radio to adversely affect electronic systems. For this reason, we recommend that you carefully follow the radio manufacturer’s instructions if you choose to install one of these devices. SAFETY AND VEHICLE DAMAGE WARNING This manual includes information titled as DANGER, WARNING, CAUTION and NOTICE. These titles indicate the following: DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE NOTICE indicates a situation which, if not avoided, could result in vehicle damage. F2 HYUNDAI VEHICLE OWNER PRIVACY POLICY Your Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect use and share this information. You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com website at: https://www.hyundaiusa.com/owner-privacy-policy.aspx If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact the Hyundai Customer Care Center at: Hyundai Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 [email protected] Hyundai’s Customer Care Center representatives are available Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST and Saturday between 6:30 AM and 3:00 PM PST (English). For Customer Care assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST. F3 Table of Contents Foreword 1 Vehicle Information 2 Safety System 3 Instrument Cluster 4 Convenience Features 5 While Driving 6 Driver Assistance System 7 Emergency Situations 8 Maintenance 9 Index I 1. Foreword Introduction........................................................................................................ 1-2 Hyundai Motor America..................................................................................... 1-2 Guide to Hyundai Genuine Parts....................................................................... 1-3 How to Use This Manual.....................................................................................1-4 Safety Messages.................................................................................................1-4 Fuel Requirements.............................................................................................. 1-5 Vehicle Modifications......................................................................................... 1-7 Vehicle Break-In Process.................................................................................... 1-7 Vehicle Data Collection and Event Data Recorders.........................................1-8 1 Foreword INTRODUCTION Congratulations, and thank you for choosing HYUNDAI. We are pleased to welcome you to the growing number of discerning people who drive HYUNDAIs. We are very proud of the advanced engineering and high-quality construction of each HYUNDAI we build. Your Owner’s Manual will introduce you to the features and operation of your new HYUNDAI. To become familiar with your new HYUNDAI, so that you can fully enjoy it, read this Owner’s Manual carefully before driving your new vehicle. This manual contains important safety information and instructions intended to familiarize you with your vehicle’s controls and safety features so you can safely operate your vehicle. This manual also contains information on maintenance designed to enhance safe operation of the vehicle. It is recommended that all service and maintenance on your car be performed by an authorized HYUNDAI dealer. HYUNDAI dealers are prepared to provide high-quality service, maintenance and any other assistance that may be required. This Owner’s Manual should be considered a permanent part of your vehicle, and should be kept in the vehicle so you can refer to it at any time. The manual should stay with the vehicle if you sell it to provide the next owner with important operating, safety and maintenance information. HYUNDAI MOTOR AMERICA CAUTION Severe engine and transmission damage may result from the use of poor quality fuels and lubricants that do not meet HYUNDAI specifications. You must always use high quality fuels and lubricants that meet the specifications listed on Page 2-11 in the Vehicle Specifications section of the Owner’s Manual. Copyright 2022 HYUNDAI Motor America. All rights reserved. No part of this publication may be reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written permission of HYUNDAI Motor America. 1-2 01 GUIDE TO HYUNDAI GENUINE PARTS 1. What are HYUNDAI Genuine Parts? HYUNDAI Genuine Parts are the same parts used by HYUNDAI Motor Company to manufacture vehicles. They are designed and tested for the optimum safety, performance, and reliability for our customers. 2. What are HYUNDAI Genuine Parts? HYUNDAI Genuine Parts are engineered and built to meet rigid manufacturing requirements. Damage caused by using imitation, counterfeit or used salvage parts is not covered under the HYUNDAI New Vehicle Limited Warranty or any other HYUNDAI warranty. In addition, any damage to or failure of HYUNDAI Genuine Parts caused by the installation or failure of an imitation, counterfeit or used salvage part is not covered by any HYUNDAI Warranty. 3. How can you tell if you are purchasing HYUNDAI Genuine Parts? Look for the HYUNDAI Genuine Parts Logo on the package (see below). HYUNDAI Genuine Parts exported to the U.S. are packaged with labels written only in English. HYUNDAI Genuine Parts are only sold through authorized HYUNDAI Dealerships. 1-3 Foreword HOW TO USE THIS MANUAL SAFETY MESSAGES We want to help you get the greatest possible driving pleasure from your vehicle. Your Owner’s Manual can assist you in many ways. To gain an overview of the contents of your Owner’s Manual, use the Table of Contents in the front of the manual. The first page of each Chapter includes a detailed Table of Contents of the topics in that Chapter. To quickly locate information about your vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in this manual and the page number where it can be found. For your convenience, we have incorporated tabs on the right-hand page edges. These tabs are coded with the Chapter titles to assist you with navigating through the manual. Your safety, and the safety of others, is very important. This Owner’s Manual provides you with many safety precautions and operating procedures. This information alerts you to potential hazards that may hurt you or others, as well as damage to your vehicle. Safety messages found on vehicle labels and in this manual describe these hazards and what to do to avoid or reduce the risks. Warnings and instructions contained in this manual are for your safety. Failure to follow safety warnings and instructions can lead to serious injury or death. 1-4 01 FUEL REQUIREMENTS Throughout this manual DANGER, WARNING, CAUTION, NOTICE and the SAFETY ALERT SYMBOL will be used. This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. The safety alert symbol precedes the signal words DANGER, WARNING and CAUTION. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Your new vehicle is designed to obtain maximum performance with UNLEADED FUEL, as well as minimize exhaust emissions and spark plug fouling. Your new vehicle is designed to perform optimally unleaded fuel having an octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher. (Do not use methanol blended fuels) NOTICE To prevent damage to the engine and engine components, never add any fuel system cleaning agents to the fuel tank other than what has been specified. Consult an authorized HYUNDAI dealer for additional information. WARNING • Do not “top off” after the nozzle automatically shuts off when refueling. • Always check that the fuel cap is installed securely to prevent fuel spillage in the event of an accident. NOTICE NOTICE indicates a situation which, if not avoided, could result in vehicle damage. 1-5 Foreword Gasoline containing alcohol or methanol Using Fuel Additives (except Detergent Fuel Additives) Gasohol, a mixture of gasoline and ethanol (also known as grain alcohol) are being marketed along with or instead of leaded or unleaded gasoline. For example, “E15” is a gasohol comprised of 15% ethanol and 85% gasoline. Do not use gasohol containing more than 15% ethanol, and do not use gasoline or gasohol containing any methanol. Either of these fuels may cause drivability problems and damage to the fuel system, engine control system and emission control system. Discontinue using gasohol of any kind if drivability problems occur. “E85” fuel is an alternative fuel comprised of 85 percent ethanol and 15 percent gasoline, and is manufactured exclusively for use in Flexible Fuel Vehicles. “E85” is not compatible with your vehicle. Use of “E85” may result in poor engine performance and damage to your vehicle’s engine and fuel system. HYUNDAI recommends that customers do not use fuel with an ethanol content exceeding 15 percent. Using fuel additives such as: - Silicone fuel additive - Ferrocene (iron-based) fuel additive - Other metallic-based fuel additives may result in cylinder misfire, poor acceleration, engine stalling, damage to the catalyst, or abnormal corrosion, and may cause damage to the engine resulting in a reduction in the overall life of the powertrain. - The Malfunction Indicator Lamp (MIL) may illuminate. NOTICE To prevent damage to your vehicle’s engine and fuel system: • Never use gasohol which contains methanol. • Never use gasohol containing more than 15% ethanol. • Never use leaded fuel or leaded gasohol. • Never use “E85” fuel. Your New Vehicle Limited Warranty does not cover damage to the fuel system or any performance problems caused by the use of “E85” fuel. 1-6 NOTICE Damage to the fuel system or performance problem caused by the use of these fuels or fuel additives may not be covered by your New Vehicle Limited Warranty. Gasoline containing MMT Some gasoline contains harmful manganese-based fuel additives such as MMT (Methylcyclopentadienyl Manganese Tricarbonyl). HYUNDAI does not recommend the use of gasoline containing MMT. This type of fuel can reduce vehicle performance and affect your emission control system. The malfunction indicator lamp on the cluster may come on. 01 VEHICLE MODIFICATIONS Detergent Fuel Additives HYUNDAI recommends that you use good quality gasolines treated with detergent additives such as TOP TIER Detergent Gasoline, which help prevent deposit formation in the engine. These gasolines will help the engine run cleaner and enhance performance of the Emission Control System. For more information on TOP TIER Detergent Gasoline, please go to the website (www. toptiergas.com). For customers who do not use TOP Tier Detergent Gasoline regularly, and have problems starting or the engine does not run smoothly, detergent-based fuel additives that you can purchase separately may be added to the gasoline. If TOP TIER Detergent Gasoline is not available, one bottle of additive added to the fuel tank according to the maintenance schedule is recommended (refer to the Maintenance Schedule in chapter 8). Additives are available from your authorized HYUNDAI dealer along with information on how to use them. Do not mix other additives. Operation in foreign countries If you are going to drive your vehicle in another country, be sure to: • Observe all regulations regarding registration and insurance. • Determine that acceptable fuel is available. • This vehicle should not be modified. Modification of your vehicle could affect its performance, safety or durability and may even violate governmental safety and emissions regulations. In addition, damage or performance problems resulting from any modification may not be covered under warranty. • If you use unauthorized electronic devices, it may cause the vehicle to operate abnormally, wire damage, battery discharge and fire. For your safety, do not use unauthorized electronic devices. VEHICLE BREAK-IN PROCESS By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. • Do not race the engine. • While driving, avoid sudden acceleration and stop. • Do not maintain a single speed for long periods of time, either fast or slow. Varying engine speed is needed to properly break-in the engine. • Avoid hard stops, except in emergencies, to allow the brakes to seat properly. • Fuel economy and engine performance may vary depending on vehicle break-in process and be stabilized after 6,000 km (4,000 miles). New engines may consume more oil during the vehicle break-in period. 1-7 Foreword WARNING CALIFORNIA PROPOSITION 65 WARNING Items contained in motor vehicles or emitted from them are known to the State of California to cause cancer and birth defects or reproductive harm. These include: • Gasoline and its vapors • Engine exhaust • Used engine oil • Interior passenger compartment components and materials • Component parts which are subject to heat and wear In addition, battery posts, terminals and related accessories contain lead, lead compounds and other chemicals known to the State of California to cause cancer and reproductive harm. For more information go to https://www.p65warnings.ca.gov/ passenger-vehicle 1-8 VEHICLE DATA COLLECTION AND EVENT DATA RECORDERS This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: • How various systems in your vehicle were operating; • Whether or not the driver and passenger safety belts were buckled/ fastened; • How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, • How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (for example, name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation. To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. 2. Vehicle Information Exterior Overview...............................................................................................2-2 Interior Overview............................................................................................... 2-4 Instrument Panel Overview............................................................................... 2-5 Engine Compartment........................................................................................ 2-6 Dimensions..........................................................................................................2-7 Engine..................................................................................................................2-7 Bulb Wattage...................................................................................................... 2-8 Tires and Wheels................................................................................................ 2-9 Volume and Weight..........................................................................................2-10 Air Conditioning System...................................................................................2-10 Recommended Lubricants and Capacities......................................................2-11 Recommended SAE Viscosity Number......................................................................2-12 Vehicle Identification Number (VIN)............................................................... 2-13 Vehicle Certification Label............................................................................... 2-13 Tire Specification and Pressure Label............................................................. 2-14 Engine Number................................................................................................. 2-14 2 Vehicle Information EXTERIOR OVERVIEW „ Front view The actual shape may differ from the illustration. OQX012001N 1. Hood........................................................5-32 5. Side view mirror...................................... 5-21 2. Headlight/Daytime running lamp.........9-51 6. Front windshield wiper blades............. 9-24 3. Turn signal lamp.................................... 9-52 7. Windows.................................................5-23 4. Tires and wheels.................................... 9-28 2-2 02 „ Rear view The actual shape may differ from the illustration. OQX012002N 1. Antenna..................................................5-80 6. Rear window wiper blade..................... 9-25 2. Doors....................................................... 5-12 7. Liftgate................................................... 5-34 3. Fuel filler door........................................ 5-36 8. Rear lamps............................................. 9-56 4. High mounted stop lamp......................9-58 9. Back-up lamp......................................... 9-57 5. Wide-rear view camera..........................7-57 2-3 Vehicle Information INTERIOR OVERVIEW The actual shape may differ from the illustration. OQX012003N 1. Door lock/unlock button........................ 5-13 7. ESC OFF button...................................... 6-21 2. Outside rearview mirror control switch......................................................5-22 8. Hood release lever..................................5-32 3. Central door lock switch........................ 5-14 10. Steering wheel........................................5-18 4. Power window switches........................5-23 11. Seat........................................................... 3-3 5. Power window lock switch................... 5-26 12. Instrument panel fuse............................9-41 6. Instrument panel illumination control switch....................................................... 4-5 13. Fuel filler door........................................ 5-36 2-4 9. Steering wheel tilt/telescopic lever...... 5-19 02 INSTRUMENT PANEL OVERVIEW The actual shape may differ from the illustration. 1. Instrument cluster................................... 4-4 OQX012011N 2. Horn........................................................ 5-20 9. Intelligent variable transmission shift lever................................................ 6-12 3. Key ignition switch.................................. 6-5 10. Seat warmer............................................ 3-12 Engine Start/Stop button........................ 6-8 11. Drive mode selection knob................... 6-25 4. Infotainment system.............................5-80 12. Power outlet............................................5-72 5. Hazard warning flasher switch............... 8-2 13. USB charger............................................5-73 6. Manual climate control system............ 5-50 14. Wireless charging system indicator......5-74 Automatic climate control system....... 5-58 15. Wireless charging system pad...............5-74 7. Passenger’s front air bag...................... 3-33 16. Driver’s front air bag.............................. 3-33 8. Glove box................................................ 5-71 17. Light control........................................... 5-38 Turn signals............................................ 5-43 18. Wiper/Washer........................................ 5-47 2-5 Vehicle Information ENGINE COMPARTMENT The actual engine room in the vehicle may differ from the illustration. OQX089001L 1. Engine coolant reservoir........................ 9-17 6. Windshield washer fluid reservoir......... 9-21 2. Brake/clutch fluid reservoir.................. 9-20 7. Engine room junction block.................. 9-42 3. Engine air filter...................................... 9-22 8. Battery.................................................... 9-26 4. Engine oil dipstick.................................. 9-15 9. Radiator cap............................................9-18 5. Engine oil filler cap................................. 9-15 2-6 02 DIMENSIONS Item in (mm) Overall length 159.0 (4,040) Overall width 69.7 (1,770) Overall height Front tread Rear tread With roof rack 62.7 (1,592) Without roof rack 61.6 (1,565) 185/65R15 (6.0J) 61.2 (1,555) 205/55R17 (6.5J) 60.4 (1,535) 185/65R15 (6.0J) 61.6 (1,565) 205/55R17 (6.5J) Wheelbase 60.9 (1,546) 99.2 (2,520) ENGINE Item Displacement Bore x Stroke Firing order No. of cylinders Smartstream G1.6 cu.in (cc) in (mm) 97.5 (1,598) 2.98 x 3.5 (75.6 x 89.0) 1-3-4-2 4, in-line 2-7 Vehicle Information BULB WATTAGE Light bulb Type A Type B Front Type C Bulb type Wattage Headlight (High/Low) HB3 65 Parking lamp W5W 5 Headlight HB3 65 Daytime running lamp (DRL)/parking lamp LED LED Cornering lamp H7 55 Headlight (High/low) LED LED Daytime running lamp (DRL)/parking lamp LED LED Cornering lamp Turn signal lamp W5W WY5W 5 Side repeater lamp (Outside mirror) LED LED Stop/tail lamp P21/5W 21/5 Turn signal lamp 27W 7 Type B Side marker - - Stop/tail lamp LED LED Tail lamp LED LED Side marker LED LED Turn signal lamp PY21W 21 License plate lamp W5W 5 Back up lamp W16W 16 Map lamp 2-8 5 Side marker High mounted stop lamp Interior 55 28/8 Side repeater lamp Type A Rear H7 2357NA W16W 16 Type A W10W 10 Type B FESTOON 8 Room lamp FESTOON 8 Vanity mirror lamp FESTOON 5 Luggage compartment lamp FESTOON 8 02 TIRES AND WHEELS Inflation pressure kPa (psi) Item Full size tire Tire Size Front Maximum load Rear Front Rear 185/65 R15 6.0Jx15 250 (36) 250 (36) 250 (36) 250 (36) 205/55 R17 6.5Jx17 230 (33) 230 (33) 230 (33) 230 (33) Compact T125/80 D15 spare tire (if equipped) T125/80 D16 *1 : Wheel Size Normal load *1 4Tx15 420 (60) 420 (60) 420 (60) 420 (60) 4Tx16 420 (60) 420 (60) 420 (60) 420 (60) Wheel lug nut torque kgf·m (lbf·ft, N·m) 11~13 (79~94, 107~127) Normal load: Up to 3 persons NOTICE • It is permissible to add 3 psi to the standard tire pressure specification if colder temperatures are expected soon. Tires typically loose 1psi (7kPa) for every 12°F temperature drop. If extreme temperature variations are expected, recheck your tire pressure as necessary to keep them properly inflated. • An air pressure generally decreases, as you drive up to a high-altitude area above sea level. Thus, if you plan to drive a high-altitude area, check the tire pressures in advance. If necessary, inflate them to a proper level. (Air inflation per altitude: +2.4 psi/1 mile) CAUTION • When replacing tires, use the same size originally supplied with the vehicle. Using tires of a different size can damage the related parts or not work properly. • When replacing tires, ALWAYS use the same size, type, construction and tread pattern supplied with the vehicle for all tires. 2-9 Vehicle Information VOLUME AND WEIGHT Smartstream G1.6 Items Gross vehicle weight IVT 3,770 (1,710) lbs. (kg) Luggage volume (SAE) cu ft (ℓ) Behind 1st row : 18.66 (528) Behind 2st row : 31.86 (902) IVT: Intelligent variable transmission AIR CONDITIONING SYSTEM Item Refrigerant Compressor lubricant oz. (g) oz. (g) Weight of Volume Classification 17.6±0.88 (500±25) R-1234yf 4.23±0.35 (120±10) PAG Contact an authorized HYUNDAI dealer for more details. 2-10 02 RECOMMENDED LUBRICANTS AND CAPACITIES To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle. Lubricant Volume Classification Engine oil (drain and refill) *1 *2 Smartstream G1.6 4.02 US qt. (3.8 ℓ) API SN PLUS/SP or ILSAC GF-6 Intelligent variable transmission fluid 6.34 US qt. (6.7 ℓ) CVTF (SP-CVT1) *3 Coolant Mixture of antifreeze and water 6.32 US qt. (5.78 ℓ) (Phosphate-based Ethylene glycol coolant for aluminum radiator) IVT Brake/clutch fluid 0.74 ~ 0.85 US qt. SAE J1704 DOT-4 LV, FMVSS 116 (0.7 ~ 0.8 ℓ) DOT-4, ISO4925 CLASS-6 Fuel 11.89 US gal. (45 ℓ) Refer to “Fuel requirements” in chapter 1. IVT: Intelligent variable transmission *1 : Refer to the recommended SAE viscosity numbers on page 12. *2 : Requires grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition. *3 : Use only specified genuine Intelligent variable transmission fluid. The use of nonspecified fluid (even marked as compatible with genuine) could result in shift quality deterioration and vibrations, eventually, the transmission failure. 2-11 Vehicle Information Recommended SAE Viscosity Number Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage. When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart. CAUTION Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged. Temperature Range for SAE Viscosity Numbers Temperature Engine Oil *1 : °C (°F) -30 -20 -10 -10 0 20 0 10 40 20 60 30 80 40 50 100 120 0W-20*1 Requires grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition. An engine oil displaying this API Certification Mark conforms to the international Lubricant Specification Advisory Committee (ILSAC). It is recommended to only use engine oils that uphold this API Certification Mark. 2-12 02 VEHICLE IDENTIFICATION NUMBER (VIN) VEHICLE CERTIFICATION LABEL „ Frame number OIB084003 The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc. The number is punched on the floor under the passenger seat. To check the number, open the cover. OIB074059 The vehicle certification label attached on the driver’s side center pillar gives the Vehicle Identification Number (VIN). „ VIN label OIB074054 The VIN is also on a plate attached to the top of the dashboard. The number on the plate can easily be seen through the windshield from outside. 2-13 Vehicle Information TIRE SPECIFICATION AND PRESSURE LABEL ENGINE NUMBER OQX089040L OQX089049N The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver’s side center pillar gives the tire pressures recommended for your car. 2-14 The engine number is stamped on the engine block as shown in the drawing. 3. Safety System This chapter provides you with important information about how to protect yourself and your passengers. It explains how to properly use your seats and seat belts, and how your air bags work. Additionally, this chapter explains how to properly restrain infants and children in your vehicle. Important Safety Precautions............................................................................3-2 Always Wear Your Seat Belt.......................................................................................... 3-2 Restrain All Children...................................................................................................... 3-2 Air Bag Hazards............................................................................................................. 3-2 Driver Distraction.......................................................................................................... 3-2 Control Your Speed....................................................................................................... 3-2 Keep Your Vehicle in Safe Condition............................................................................ 3-2 Seats................................................................................................................... 3-3 Safety Precautions........................................................................................................3-4 Front Seats.....................................................................................................................3-5 Rear Seats...................................................................................................................... 3-7 Head Restraints.............................................................................................................3-9 Seat Warmers...............................................................................................................3-12 Seat Belts...........................................................................................................3-14 Seat Belt Safety Precautions...................................................................................... 3-14 Seat Belt Warning Light...............................................................................................3-15 Seat Belt Restraint System......................................................................................... 3-16 Additional Seat Belt Safety Precautions....................................................................3-20 Care of Seat Belts........................................................................................................ 3-22 Child Restraint System (CRS).......................................................................... 3-23 Children Always in the Rear........................................................................................ 3-23 Selecting a Child Restraint System (CRS)..................................................................3-24 Installing a Child Restraint System (CRS).................................................................. 3-25 Air Bag - Advanced Supplemental Restraint System..................................... 3-31 Where Are the Air Bags?.............................................................................................3-33 How Does the Air Bag System Operate?....................................................................3-36 What to Expect After an Air Bag Inflates...................................................................3-39 Occupant Classification System (OCS)..................................................................... 3-40 Why Didn’t My Air Bag Go Off in a Collision?........................................................... 3-46 SRS Care..................................................................................................................... 3-50 Additional Safety Precautions.................................................................................... 3-51 Air Bag Warning Labels............................................................................................... 3-51 3 Safety System IMPORTANT SAFETY PRECAUTIONS You will find many safety precautions and recommendations throughout this section, and throughout this manual. The safety precautions in this section are among the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of accidents. Air bags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with air bags, ALWAYS make sure you and your passengers wear your seat belts, and wear them properly. Restrain All Children All children under age 13 should ride in your vehicle properly restrained in a rear seat, not the front seat. Infants and small children should be restrained in an appropriate child restraint. Larger children should use a booster seat with the lap/shoulder belt until they can use the seat belt properly without a booster seat. Air Bag Hazards While air bags can save lives, they can also cause serious or fatal injuries to occupants who sit too close to them, or who are not properly restrained. Infants, young children, and shorter adults are at the greatest risk of being injured by an inflating air bag. Follow all instructions and warnings in this manual. Driver Distraction Driver distraction presents a serious and potentially deadly danger, especially for inexperienced drivers. Safety should be the first concern when behind the wheel and drivers need to be aware of the wide array of potential distractions, such as drowsiness, reaching for objects, eating, personal grooming, other passengers, and using cellular phones. 3-2 Drivers can become distracted when they take their eyes and attention off the road or their hands off the wheel to focus on activities other than driving. To reduce your risk of distraction or getting into an accident: • ALWAYS set up your mobile devices (for example, MP3 players, phones, navigation units, etc.) when your vehicle is parked or safely stopped. • ONLY use your mobile device when allowed by laws and when conditions permit safe use. NEVER text or email while driving. Most states have laws prohibiting drivers from texting. Some states and cities also prohibit drivers from using handheld phones. • NEVER let the use of a mobile device distract you from driving. You have a responsibility to your passengers and others on the road to always drive safely, with your hands on the wheel as well as your eyes and attention on the road. Control Your Speed Excessive speed is a major factor in crash injuries and deaths. Generally, the higher the speed, the greater the risk, but serious injuries can also occur at lower speeds. Never drive faster than is safe for current conditions, regardless of the maximum speed posted. Keep Your Vehicle in Safe Condition Having a tire blowout or a mechanical failure can be extremely hazardous. To reduce the possibility of such problems, check your tire pressures and condition frequently, and perform all regularly scheduled maintenance. 03 SEATS OQX039001N Front seats (1) Forward and backward (2) Seatback angle (3) Seat height (4) Head restraint (5) Seat warmer Rear seats (6) Head restraint (7) Seatback folding 3-3 Safety System Safety Precautions Adjusting the seats so that you are sitting in a safe, comfortable position plays an important role in driver and passenger safety together with the seat belts and air bags in an accident. WARNING Do not use a cushion that reduces friction between the seat and the passenger. The passenger’s hips may slide under the lap portion of the seat belt during an accident or a sudden stop. Serious or fatal internal injuries could result because the seat belt cannot operate properly. Air Bags You can take steps to reduce the risk of being injured by an inflating air bag. Sitting too close to an air bag greatly increases the risk of injury in the event the air bag inflates. The National Highway Traffic Safety Administration (NHTSA) recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and their chest. WARNING To reduce the risk of serious injury or death from an inflating air bag, take the following precautions: • Adjust the driver’s seat as far to the rear as possible while maintaining the ability to maintain full control of the vehicle. • Adjust the front passenger seat as far to the rear as possible. • Hold the steering wheel by the rim with your hands at the 9 o’clock and 3 o’clock positions to minimize the risk of injuries to your hands and arms. 3-4 • NEVER place anything or anyone between the steering wheel and the air bag. • Do not allow the front passenger to place feet or legs on the dashboard to minimize the risk of leg injuries. Seat Belts Always fasten your seat belt before starting any trip. At all times, passengers should sit upright and be properly restrained. Infants and small children must be restrained in appropriate child restraint systems. Adults and children who have outgrown a booster seat must be restrained using the seat belts. WARNING Take the following precautions when adjusting your seat belt: • NEVER use one seat belt for more than one occupant. • Always position the seatback upright with the lap portion of the seat belt snug and low across the hips. • NEVER allow children or small infants to ride on a passenger’s lap. • Do not route the seat belt across your neck, across sharp edges, or reroute the shoulder strap away from your body. • Do not allow the seat belt to become caught or jammed. 03 Front Seats WARNING Take the following precautions when adjusting your seat: • NEVER attempt to adjust the seat while the vehicle is moving. The seat could respond with unexpected movement and may cause loss of vehicle control resulting in an accident. • Do not place anything under the front seats. Loose objects in the driver’s foot area could interfere with the operation of the foot pedals, causing an accident. • Do not allow anything to interfere with the normal position and proper locking of the seatback. • Do not place a cigarette lighter on the floor or seat. When you operate the seat, gas may exit out of the lighter causing a fire. • Use extreme caution when picking up small objects trapped under the seats or between the seat and the center console. Your hands might be cut or injured by the sharp edges of the seat mechanism. • If there are occupants in the rear seats, be careful while adjusting the front seat position. • Make sure that the seat is locked in place after the adjustment. If not, the seat might move unexpectedly resulting in an accident. Manual Adjustment The front seat can be adjusted by using the levers located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel. OQX039002L Forward and rearward adjustment To move the seat forward or rearward: 1. Pull up the seat slide adjustment lever and hold it. 2. Slide the seat to the position you desire. 3. Release the lever and make sure the seat is locked in place. Move forward and rearward without using the lever. If the seat moves, it is not locked properly. CAUTION To prevent injury: • Do not adjust your seat while wearing your seat belt. Moving the seat cushion forward may cause strong pressure on your abdomen. • Do not allow your hands or fingers to get caught in the seat mechanisms while the seat is moving. 3-5 Safety System OQX039003L Seatback angle To recline the seatback: 1. Lean forward slightly and lift up the seatback lever. 2. Carefully lean back on the seat and adjust the seatback to the position you desire. 3. Release the lever and make sure the seatback is locked in place. (The lever MUST return to its original position for the seatback to lock.) Reclining seatback Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protection of your restraint system (seat belts and air bags) is greatly reduced by reclining your seatback. WARNING NEVER ride with a reclined seatback when the vehicle is moving. Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. Drivers and passengers should ALWAYS sit well back in their seats, properly belted, and with the seatbacks upright. 3-6 Seat belts must be snug against your hips and chest to work properly. When the seatback is reclined, the shoulder belt cannot do its job because it will not be snug against your chest. Instead, it will be in front of you. During an accident, you could be thrown into the seat belt, causing neck or other injuries. The more the seatback is reclined, the greater chance the passenger’s hips will slide under the lap belt or the passenger’s neck will strike the shoulder belt. OQX039004L Seat height (for driver’s seat) To change the height of the seat cushion: • Push down on the lever several times, to lower the seat cushion. • Pull up on the lever several times, to raise the seat cushion. 03 Seatback Pocket (if equipped) Rear Seats Folding the Rear Seat The rear seatbacks can be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle. WARNING OQX039041L The seatback pocket is provided on the back of the front seatbacks. WARNING To prevent the Occupant Classification System from malfunctioning: Do not hang onto the front passenger’s seatback. CAUTION Do not put heavy or sharp objects in the seatback pockets. In an accident they could come loose from the pocket and injure occupants. • Never allow passengers to sit on top of the folded down seatback while the vehicle is moving. This is not a proper seating position and no seat belts are available for use. This could result in serious injury or death in case of an accident or sudden stop. • Objects carried on the folded down seatback should not extend higher than the top of the front seatbacks. This could allow cargo to slide forward and cause injury or damage during sudden stops. To fold down the rear seatback: 1. Set the front seatback to the upright position and if necessary, slide the front seat forward. OQX039012N 2. Lower the rear head restraints to the lowest position by pushing and holding the release button and pushing down on the head restraint. 3-7 Safety System OQX039013N 3. Locate the seatbelt toward the outboard position before folding down the seatback. If not, the seatbelt system may be interfered by the seatback. OQX039006N 5. To use the rear seat, lift and unfold the seatback to the upright position. Push the seatback firmly until it clicks into place. Make sure the seatback is locked in place. Return the seatbelt back into the guide (1). WARNING OQX039005N When returning the rear seatback from a folded to an upright position, hold the seatback and return it slowly. Ensure that the seatback is completely locked into its upright position by pushing on the top of the seatback. In an accident or sudden stop, an unlocked seatback could allow cargo to move forward with great force and enter the passenger compartment, which could result in serious injury or death. WARNING Do not place objects in the rear seats, since they cannot be properly secured and may hit vehicle occupants in a collision causing serious injury or death. OQX039007N 4. Pull out the seatbelt from guide (1) and pull up the seatback folding lever (2), then fold the seat toward the front of the vehicle. 3-8 03 WARNING Make sure the vehicle is off, the shift lever is in P (Park), and the parking brake is securely applied whenever loading or unloading cargo. Failure to take these steps may allow the vehicle to move if the shift lever is inadvertently moved to another position. NOTICE • Be careful when loading cargo through the rear passenger seats to prevent damage to the vehicle interior. • When cargo is loaded through the rear passenger seats, ensure the cargo is properly secured to prevent it from moving while driving. • Unsecured cargo in the passenger compartment can cause damage to the vehicle or injury to the occupants. Head Restraints The vehicle’s front and rear seats have adjustable head restraints. The head restraints provide comfort for passengers, but more importantly they are designed to help protect passengers from whiplash and other neck and spinal injuries during an accident, especially in a rear impact collision. WARNING To help reduce the risk of serious injury or death in an accident, take the following precautions when adjusting your head restraints: • Always properly adjust the head restraints for all passengers BEFORE starting the vehicle. • NEVER let anyone ride in a seat with the head restraints removed or reversed. OLF034072N Adjust the head restraints so the middle of the head restraint is at the same height as the height of the top of the eyes. • NEVER adjust the head restraint position of the driver’s seat when the vehicle is in motion. • Adjust the head restraint as close to the passenger’s head as possible. Do not use a seat cushion that holds the body away from the seatback. • Make sure the head restraint locks into position after adjusting it. NOTICE To prevent damage, NEVER hit or pull on the head restraints. CAUTION When there are no occupants in the rear seats, adjust the height of the head restraint to the lowest position. The rear seat head restraint can reduce the visibility of the rear area. 3-9 Safety System Front Seat head Restraints OLF034015 OQX039008L Both the driver’s and passenger’s front seat are equipped with adjustable head restraints for the safety and comfort. NOTICE If you recline the seatback towards the front with the head restraint and seat cushion raised, the head restraint may come in contact with the sunvisor or other parts of the vehicle. OQX039009L Adjusting the height up and down To raise the head restraint: 1. Pull it up to the desired position (1). To lower the head restraint: 1. Push and hold the release button (2) on the head restraint support. 2. Lower the head restraint to the desired position (3). 3-10 OQX039010L Removal/Reinstallation To remove the head restraint: 1. Recline the seatback (2) rearward using the seatback angle lever (1). 2. Raise the head restraint as far as it can go. 3. Press the head restraint release button (3) while pulling the head restraint up (4). 03 CAUTION • For each rear passenger, adjust the head restraint so that the middle of the head restraint is at the same height as the height of the top of the eyes. OQX039011L To reinstall the head restraint: 1. Put the head restraint poles (2) into the holes while pressing the release button (1). 2. Adjust the head restraint to the appropriate height. 3. Adjust the seatback (4) forward using the seatback angle lever (3). • When seating on the rear seat, do not adjust the height of the head restraints to the lowest position. Rear Seat head Restraints OQX039015N Adjusting the height up and down To raise the head restraint: 1. Pull it up to the desired position (1). OQX039032L The rear seats are equipped with head restraints in all the seating positions for the passenger’s safety and comfort. To lower the head restraint: 1. Push and hold the release button (2) on the head restraint support. 2. Lower the head restraint to the desired position (3). 3-11 Safety System Seat Warmers (if equipped) Seat warmers are provided to warm the seats during cold weather. WARNING OQX039015N Removal/Reinstallation To remove the head restraint: 1. Raise the head restraint as far as it can go. 2. Press the head restraint release button (2) while pulling the head restraint up (1). To reinstall the head restraint: 1. Put the head restraint poles into the holes (3) while pressing the release button (2). 2. Adjust the head restraint to the appropriate height. The seat warmers can cause a SERIOUS BURN, even at low temperatures and especially if used for long periods of time. Passengers must be able to feel if the seat is becoming too warm so they can turn it off, if needed. People who cannot detect temperature change or pain to the skin should use extreme caution, especially the following types of passengers: • Infants, children, elderly or disabled persons, or hospital outpatients. • People with sensitive skin or who burn easily. • Fatigued individuals. • Intoxicated individuals. • People taking medication that can cause drowsiness or sleepiness. WARNING NEVER place anything on the seat that insulates against heat when the seat warmer is in operation, such as a blanket or seat cushion. This may cause the seat warmer to overheat, causing a burn or damage to the seat. 3-12 03 NOTICE To prevent damage to the seat warmers and seats: • Never use a solvent such as paint thinner, benzene, alcohol or gasoline to clean the seats. • Do not place heavy or sharp objects on seats equipped with seat warmers. • Do not change the seat cover. It may damage the seat warmer. • Each time you push the switch, the temperature setting of the seat is changed as follows: OFF LOW ( ) HIGH ( ) MEDIUM ( ) • When pressing the switch for more than 1.5 seconds with the seat warmer operating, the seat warmer will turn OFF. • The seat warmer defaults to the OFF position each time the ignition switch is turned to the ON position. Information With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature. OQX032016N While the engine is running, push either of the switches to warm the driver’s seat or front passenger’s seat. During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the OFF position. 3-13 Safety System SEAT BELTS This section describes how to use the seat belts properly. It also describes some of the things to avoid when using seat belts. Seat Belt Safety Precautions Always fasten your seat belt and make sure all passengers have fastened their seat belts before starting any trip. Air bags are designed to supplement the seat belt as an additional safety device, but they are not a substitute. Most states require all occupants of a vehicle to wear seat belts. WARNING Seat belts must be used by ALL passengers whenever the vehicle is moving. Take the following precautions when adjusting and wearing seat belts: • ALWAYS properly restrain children under age 13 in the rear seats. • NEVER allow children to ride in the front passenger seat. If a child age 13 or older must be seated in the front seat, move the seat as far back as possible and properly restrain them in the seat. • NEVER allow an infant or child to be carried on an occupant’s lap. • NEVER ride with the seatback reclined when the vehicle is moving. • Do not allow children to share a seat or seat belt. • Do not wear the shoulder belt under your arm or behind your back. • Always wear both the shoulder portion and lap portion of the lap/ shoulder belt. • Do not use the seat belt if it is twisted. A twisted seat belt will not protect you properly in an accident. • Do not use a seat belt if the webbing or hardware is damaged. 3-14 • Do not latch the seat belt into the buckles of other seats. • NEVER unfasten the seat belt while driving. This may cause loss of vehicle control resulting in an accident. • Make sure there is nothing in the buckle interfering with the seat belt latch mechanism. This may prevent the seat belt from fastening securely. • No modifications or additions should be made by the user which will either prevent the seat belt adjusting devices from operating to remove slack, or prevent the seat belt assembly from being adjusted to remove slack. WARNING Damaged seat belts and seat belt assemblies will not operate properly. Always replace: • Frayed, contaminated, or damaged webbing • Damaged hardware • The entire seat belt assembly after it has been worn in an accident, even if damage to webbing or assembly is not apparent 03 Seat Belt Warning Light Seat Belt Warning Light (for Front Passenger’s Seat) Seat Belt Warning Light (for Driver’s Seat) OQX032033N As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. However, if the seat belt is unfasted, a warning chime will sound for approximately 6 seconds. If you continue not to fasten the seat belt and you drive under 12 mph (20 km/h), the warning light will stay illuminated. If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h) the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. If you unfasten the seat belt while driving under 12 mph (20 km/h), the seat belt warning light will illuminate until the seat belt is fastened. If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. As a reminder to the front passenger, the front passenger’s seat belt warning lights will illuminate for approximately 6 seconds each time you place the ignition switch to the ON position regardless of belt fastening. If you continue not to fasten the seat belt and you drive under 12 mph (20 km/h), the warning light will stay illuminated. If you continue not to fasten the seat belt and you drive over 12 mph (20 km/h) the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. If you unfasten the seat belt while driving under 12 mph (20 km/h) the seat belt warning light will illuminate until the seat belt is fastened. If you unfasten the seat belt while driving over 12 mph (20 km/h), the seat belt warning chime will sound for approximately 100 seconds and the corresponding warning light will blink. WARNING The front passenger’s seat belt warning light may not properly operate if the front passenger does not sit properly in the seat. If you place an object on the passenger seat or back seat or under the seats, the warning chime may sound. Please remove the object if the chime sounds. 3-15 Safety System Seat Belt Restraint System Seat Belt-Driver’s 3-point System with Emergency Locking Retractor WARNING Improperly positioned seat belts may increase the risk of serious injury in an accident. Take the following precautions when adjusting the seat belt: • Position the lap portion of the seat belt as low as possible across your hips, not on your waist, so that it fits snugly. • Position one arm under the shoulder belt and the other over the belt, as shown in the illustration. • Always position the shoulder belt anchor into the locked position at the appropriate height. • Never position the shoulder belt across your neck or face. OHI038140 To fasten your seat belt: Pull the seat belt out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible “click” when the tab locks into the buckle. OHI038137 You should place the lap belt (1) portion across your hips and the shoulder belt (2) portion across your chest. The seat belt automatically adjusts to the proper length after the lap belt portion is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and move with you. If there is a sudden stop or impact, the belt will lock into position. It will also lock if you try to lean forward too quickly. 3-16 03 NOTICE If you are not able to smoothly pull enough of the seat belt out from the retractor, firmly pull the seat belt out and release it. After release, you will be able to pull the belt out smoothly. OHI038142 To release your seat belt: Press the release button (1) in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again. Rear Seat Belt – Passenger’s 3-point System with Convertible Locking Retractor This type of seat belt combines the features of both an emergency locking retractor seat belt and an automatic locking retractor seat belt. Convertible retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a convertible retractor is also installed in the front passenger seat position, NEVER place any infant/child restraint system in the front seat of the vehicle. To fasten your seat belt: Pull the seat belt out of the retractor and insert the metal tab into the buckle. There will be an audible “click” when the tab locks into the buckle. When not securing a child restraint, the seat belt operates in the same way as the driver’s seat belt (Emergency Locking Retractor Type). It automatically adjusts to the proper length only after the lap belt portion of the seat belt is adjusted manually so that it fits snugly across your hips. When the seat belt is fully extended from the retractor to allow the installation of a child restraint system, the seat belt operation changes to allow the belt to retract, but not to extend (Automatic Locking Retractor Type). Refer to the “Using a Child Restraint System” section in this chapter. NOTICE Although the seat belt retractor provides the same level of protection for seated passengers in either emergency or automatic locking modes, the emergency locking mode allows seated passengers to move freely in their seat while keeping some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body. To deactivate the automatic locking mode, unbuckle the seat belt and allow the belt to fully retract. 3-17 Safety System Pre-tensioner Seat Belt (Driver And Front Passenger) OHI038142 To release your seat belt: Press the release button (1) in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again. Rear Center Seat Belt OQX039051N When using the rear center seat belt, the buckle with the “CENTER” mark must be used. WARNING Make sure that the seatback is locked in place when using the rear center seat belt. If not, the seatback may move when there is a sudden stop or collision, which could result in serious injury. 3-18 OHI038143L Your vehicle is equipped with driver’s and front passenger’s Pre-tensioner Seat Belts (Retractor Pre-tensioner). The purpose of the pre-tensioner is to make sure the seat belts fit tightly against the occupant’s body in certain frontal or side collision(s). When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal or side collision(s), the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant’s body. If the system senses excessive tension on the driver or passenger’s seat belt when the pre-tensioner system activates, the load limiter inside the retractor pre-tensioner will release some of the pressure on the affected seat belt. 03 WARNING • Always wear your seat belt and sit properly in your seat. • Do not use the seat belt if it is loose or twisted. A loose or twisted seat belt will not protect you properly in an accident. • Do not place anything near the buckle. This may adversely affect the buckle and cause it to function improperly. • Always replace your pre-tensioners after activation or an accident. • NEVER inspect, service, repair or replace the pre-tensioners yourself. This must be done by an authorized HYUNDAI dealer. • Do not hit the seat belt assemblies. WARNING Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated. When the pre-tensioner seat belt mechanism deploys during a collision, the pretensioners become hot and can burn you. OLMB033040 The Pre-Tensioner Seat Belt System consists mainly of the following components. Their locations are shown in the illustration above: 1. SRS air bag warning light 2. Retractor pre-tensioner 3. SRS control module NOTICE The sensor that activates the SRS air bag is connected with the pre-tensioner seat belts. The SRS air bag warning light on the instrument panel will illuminate for approximately 6 seconds after the ignition switch is in the ON position, and then it should turn off. If the pre-tensioner is not working properly, the warning light will illuminate even if the SRS air bag is not malfunctioning. If the warning light does not illuminate, stays illuminated or illuminates when the vehicle is being driven, have an authorized HYUNDAI dealer inspect the pre-tensioner seat belts and SRS air bags as soon as possible. 3-19 Safety System NOTICE • Both the driver’s and front passenger’s pre-tensioner seat belts may be activated in certain frontal or side collisions or rollovers. • When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal operating conditions and are not hazardous. • Although it is non-toxic, the fine dust may cause skin irritation and should not be inhaled for prolonged periods. Wash all exposed skin areas thoroughly after an accident in which the pre-tensioner seat belts were activated. WARNING • Fasten your seat belt while sitting properly in an upright position to maximize the effectiveness of the pre-tensioner seat belt system. • A pre-tensioner seat belt system is designed to activate only once. Replace the pre-tensioner seat belt system, if it was activated in an accident. Additional Seat Belt Safety Precautions Seat Belt use during Pregnancy The seat belt should always be used during pregnancy. The best way to protect your unborn child is to protect yourself by always wearing the seat belt. Pregnant women should always wear a lap-shoulder seat belt. Place the shoulder belt across your chest, routed between your breasts and away from your neck. Place the lap belt line so that it fits snugly and as low as possible across the hips, not across the abdomen. WARNING • Pregnant women and patients are more vulnerable to any impacts on the abdomen during an abrupt stop or accident. If you are in an accident while pregnant, consult your doctor. • To reduce the risk of serious injury or death to an unborn child during an accident, pregnant women should NEVER place the lap portion of the seat belt above or over the area of the abdomen where the unborn child is located. Seat Belt use and Children Infant and small children All 50 states have child restraint laws which require children to travel in approved child restraint devices, including booster seats. The age at which seat belts can be used instead of child restraints differs among states, so you should be aware of the specific requirements in your state, and where you are travelling. Infant and child restraints must be properly placed and installed in a rear seat. For more information refer to the “Child Restraint Systems” section in this chapter. 3-20 03 WARNING ALWAYS properly restrain infants and small children in a child restraint appropriate for the child’s height and weight. To reduce the risk of serious injury or death to a child and other passengers, NEVER hold a child in your lap or arms when the vehicle is moving. The violent forces created during an accident will tear the child from your arms and throw the child against the interior of the vehicle. Small children are best protected from injury in an accident when properly restrained in the rear seat by a child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards. Before buying any child restraint system, make sure that it has a label certifying that it meets Federal Motor Vehicle Safety Standard FMVSS 213. The restraint must be appropriate for your child’s height and weight. Check the label on the child restraint for this information. Refer to the “Child Restraint Systems” section in this chapter. Larger children Children under age 13 and who are too large for a booster seat must always occupy the rear seat and use the available lap/shoulder belts. A seat belt should lie across the upper thighs and be snug across the shoulder and chest to restrain the child safely. Check belt fit periodically. Children are afforded the most safety in the event of an accident when they are restrained by a proper restraint system and/or seat belts in the rear seat. Always have the LATCH system inspected by your authorized HYUNDAI dealer after an accident. An accident can damage the LATCH system and may not properly secure the child restraint. If a larger child over age 13 must be seated in the front seat, the child must be securely restrained by the available lap/shoulder belt and the seat should be placed in the rearmost position. If the shoulder belt portion slightly touches the child’s neck or face, try placing the child closer to the center of the vehicle. If the shoulder belt still touches their face or neck they need to be returned to an appropriate booster seat in the rear seat. WARNING • Always make sure children are wearing their seat belts and that they are properly adjusted before driving. • NEVER allow the shoulder belt to contact the child’s neck or face. • Do not allow more than one child to use a single seat belt. 3-21 Safety System Transporting an Injured Person Care of Seat Belts A seat belt should be used when an injured person is being transported. Consult a physician for specific recommendations. Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse. One Person Per Belt Two people (including children) should never attempt to use a single seat belt. This could increase the severity of injuries in case of an accident. Do Not Lie Down Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protections of your restraint system (seat belts and air bags) is greatly reduced by reclining your seatback. To reduce the chance of injuries in the event of an accident and to achieve the maximum effectiveness of the restraint system, all passengers should be sitting up and the front and rear seats should be in an upright position when the car is moving. A seat belt cannot provide proper protection if the person is lying down in the rear seat or if the front or rear seats are in a reclined position. WARNING • NEVER ride with a reclined seatback when the vehicle is moving. • Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. • Drivers and passengers should always sit well back in their seats, properly belted, and with the seatbacks upright. 3-22 Periodic Inspection All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible by an authorized HYUNDAI dealer. Keep Belts Clean and Dry Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric. When to Replace Seat Belts The entire seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concerning seat belt operation should be directed to an authorized HYUNDAI dealer. 03 CHILD RESTRAINT SYSTEM (CRS) Children Always in the Rear WARNING Always properly restrain children in the rear seats of the vehicle. Children of all ages are safer when restrained in the rear seat. A child riding in the front passenger seat can be forcefully struck by an inflating air bag resulting in SERIOUS INJURY or DEATH. Children under age 13 must always ride in the rear seats and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statistics, children are safer when properly restrained in the rear seats than in the front seat. Even with air bags, children can be seriously injured or killed. Children too large for a child restraint must use the seat belts provided. All 50 states have child restraint laws which require children to travel in approved child restraint devices. The laws governing the age or height/weight restrictions at which seat belts can be used instead of child restraints differs among states, so you should be aware of the specific requirements in your state, and where you are travelling. Child restraint systems must be properly placed and installed in the rear seat. You must use a commercially available child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards (FMVSS 213). Child restraint systems are generally designed to be secured in a vehicle seat by lap belt portion of a lap/shoulder belt, or by a LATCH system in the rear seats of the vehicle. Child Restraint System (CRS) Infants and younger children must be restrained in an appropriate rear-facing or forward-facing CRS that has first been properly secured to the rear seat of the vehicle. Read and comply with the instructions for installation and use provided by the manufacturer of the child restraint. WARNING An improperly secured child restraint can increase the risk of SERIOUS INJURY or DEATH in an accident. Always take the following precautions when using a child restraint system: • NEVER install a child or infant restraint in the front passenger’s seat. • Always properly secure the child restraint to a rear seat of the vehicle. • Always follow the child restraint system manufacturer’s instructions for installation and use. • Always properly restrain your child in the child restraint. • If the vehicle head restraint prevents proper installation of a child seat (as described in the child restraint system manual), the head restraint of the respective seating position shall be readjusted or entirely removed. • Do not use an infant carrier or a child safety seat that “hooks” over a seatback, it may not provide adequate protection in an accident. • After an accident, have a HYUNDAI dealer check the child restraint system, seat belts, tether anchors and lower anchors. 3-23 Safety System Selecting a Child Restraint System (CRS) When selecting a CRS for your child, always: • Make sure the CRS has a label certifying that it meets applicable Federal Motor Vehicle Safety Standards (FMVSS 213). • Select a child restraint based on your child’s height and weight. The required label or the instructions for use typically provide this information. • Select a child restraint that fits the vehicle seating position where it will be used. • Read and comply with the warnings and instructions for installation and use provided with the child restraint system. Child Restraint System Types There are three main types of child restraint systems: rear-facing seats, forward-facing seats, and booster seats. They are classified according to the child’s age, height and weight. Rear-facing child seats WARNING NEVER install a child or infant restraint in the front passenger’s seat. Placing a rear-facing child restraint in the front seat can result in SERIOUS INJURY or DEATH if the child restraint is struck by an inflating air bag. 3-24 OQX039018N A rear-facing child seat provides restraint with the seating surface against the back of the child. The harness system holds the child in place, and in an accident, acts to keep the child positioned in the seat and reduce the stress to the neck and spinal cord. All children under age one must always ride in a rear-facing infant child restraint. Convertible and 3-in-1 child seats typically have higher height and weight limits for the rear-facing position, allowing you to keep your child rearfacing for a longer period of time. Continue to use a rear-facing child seat for as long as your child will fit within the height and weight limits allowed by the child seat manufacturer. It’s the best way to keep them safe. Once your child has outgrown the rear-facing child restraint, your child is ready for a forward-facing child restraint with a harness. 03 Installing a Child Restraint System (CRS) WARNING OQX039022N Forward-facing child restraints A forward-facing child seat provides restraint for the child’s body with a harness. Keep children in a forwardfacing child seat with a harness until they reach the top height or weight limit allowed by your child restraint’s manufacturer. Once your child outgrows the forwardfacing child restraint, your child is ready for a booster seat. Booster seats A booster seat is a restraint designed to improve the fit of the vehicle’s seat belt system. A booster seat positions the seat belt so that it fits properly over the lap of your child. Keep your child in a booster seat until they are big enough to sit in the seat without a booster and still have the seat belt fit properly. For a seat belt to fit properly, the lap belt must lie snugly across the upper thighs, not the stomach. The shoulder belt should lie snug across the shoulder and chest and not across the neck or face. Children under age 13 must always ride in the rear seats and must always be properly restrained to minimize the risk of injury. Before installing your child restraint system always: • Read and follow the instructions provided by the manufacturer of the child restraint. • Read and follow the instructions regarding child restraint systems in this manual. Failure to follow all warnings and instructions could increase the risk of the SERIOUS INJURY or DEATH if an accident occurs. WARNING If the vehicle head restraint prevents proper installation of a child seat (as described in the child seat system manual, the head restraint of the respective seating position shall be readjusted or entirely removed. 3-25 Safety System After selecting a proper child seat for your child, check to make sure it fits properly in your vehicle. Follow the instructions provided by the manufacturer when installing the child seat. Note these general steps when installing the seat to your vehicle: • Properly secure the child restraint to the vehicle. All child restraints must be secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH system. If using the lap/shoulder belt for your child restraint, the convertible locking retractor should be pulled all the way out to engage the “automatic locking” mode. (See page 3-29) • Make sure the child restraint is firmly secured. After installing a child restraint to the vehicle, push and pull the seat forward-and-back and side-to-side to verify that it is securely attached to the seat. A child restraint secured with a seat belt should be installed as firmly as possible. However, some side-to-side movement can be expected. • Secure the child in the child restraint. Make sure the child is properly strapped in the child restraint according to the manufacturer instructions. Lower Anchors And Tether for Children (LATCH System) The LATCH system holds a child restraint during driving and in an accident. This system is designed to make installation of the child restraint easier and reduce the possibility of improperly installing your child restraint. The LATCH system uses anchors in the vehicle and attachments on the child restraint. The LATCH system eliminates the need to use seat belts to secure the child restraint to the rear seats. Lower anchors are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments. To use the LATCH system in your vehicle, you must have a child restraint with LATCH attachments. The child seat manufacturer will provide you with instructions on how to use the child seat with its attachments for the LATCH lower anchors. CAUTION A child restraint in a closed vehicle can become very hot. To prevent burns, check the seating surface and buckles before placing your child in the child restraint. 3-26 OQX039034L LATCH anchors have been provided in the left and right outboard rear seating positions. Their locations are shown in the illustration. There are no LATCH anchors provided for the center rear seating position. 03 WARNING Do not attempt to install a child restraint system using LATCH anchors in the rear center seating position. There are no LATCH anchors provided for this seat. Using the outboard seat anchors can damage the anchors which may break or fail in a collision resulting in serious injury or death. Securing a Child Restraint with the LATCH Anchors System To install a LATCH-compatible child restraint in either of the rear outboard seating positions: 1. Move the seat belt buckle away from the lower anchors. 2. Move any other objects away from the anchors that could prevent a secure connection between the child restraint and the lower anchors. 3. Place the child restraint on the vehicle seat, then attach the seat to the lower anchors according to the instructions provided by the child restraint manufacturer. 4. Follow the child restraint instructions for properly adjusting and tightening the lower attachments on the child restraint to the lower anchors. OQX039020L [A]: ISOFIX Anchorage Position Indicator, [B]: ISOFIX Anchorage The lower anchor position indicator symbols are located on the left and right rear seat backs to identify the position of the lower anchors in your vehicle (see arrows in illustration). The LATCH anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions. WARNING Take the following precautions when using the LATCH system: • Read and follow all installation instructions provided with your child restraint system. • To prevent the child from reaching and taking hold of unretracted seat belts, buckle all unused rear seat belts and retract the seat belt webbing behind the child. Children can be strangled if a shoulder belt becomes wrapped around their neck and the seat belt tightens. • NEVER attach more than one child restraint to a single anchor. This could cause the anchor or attachment to come loose or break. • Always have the LATCH system inspected by your authorized HYUNDAI dealer after an accident. An accident can damage the LATCH system and may not properly secure the child restraint. 3-27 Safety System NOTICE The recommended weight for the LATCH system is under 65 lb (30 kg). How to determine an appropriate child restraint weight: Child weight + Child restraint weight < 65 lb (30kg) Securing a Child Restraint Seat with “Tether Anchor” System WARNING Take the following precautions when installing the tether strap: • Read and follow all installation instructions provided with your child restraint system. • NEVER attach more than one child restraint to a single tether anchor. This could cause the anchor or attachment to come loose or break. • Do not attach the tether strap to anything other than the correct tether anchor. It may not work properly if attached to something else. • Do not use the tether anchors for adult seat belts or harnesses, or for attaching other items or equipment to the vehicle. OQX039021N First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor. Child restraint hook holders are located on the rear of the seatbacks. OQX039022N To install the tether anchor: 1. Route the child restraint tether strap over the child restraint seatback. Route the tether strap under the head restraint and between the head restraint posts, or route the tether strap over the top of the vehicle seatback. Make sure the strap is not twisted. 2. Connect the tether strap hook to the tether anchor, then tighten the tether strap according to the child seat manufacturer’s instructions to firmly secure the child restraint to the seat. 3-28 03 3. Check that the child restraint is securely attached to the seat by pushing and pulling the seat forwardand-back and side-to-side. Securing a Child Restraint with Lap/ shoulder Belt When not using the LATCH system, all child restraints must be secured to a vehicle rear seat with the lap part of a lap/shoulder belt. WARNING To install a child restraint system on the rear seats, do the following: 1. Place the child restraint system on a rear seat and route the lap/ shoulder belt around or through the child restraint, following the restraint manufacturer’s instructions. Be sure the seat belt webbing is not twisted. Make sure to insert the belt into the guide(1). NOTICE ALWAYS place a rear-facing child restraint in the rear seat of the vehicle. Placing a rear-facing child restraint in the front seat can result in serious injury or death if the child restraint is struck by an inflating air bag. When using the rear center seat belt, you should also refer to the “Rear Seat Belt – Passenger’s 3-point system” section in this chapter. OQX039057N OHI038145 Automatic locking mode Since all passenger seat belts move freely under normal conditions and only lock under extreme or emergency conditions (emergency locking mode), you must manually pull the seat belt all the way out to shift the retractor to the “Automatic Locking” mode to secure a child restraint. The “Automatic Locking” mode will help prevent the normal movement of the child in the vehicle from causing the seat belt to loosen and compromise the child restraint system. To secure a child restraint system, use the following procedure. 2. Make sure to insert the belt into the guide (1) and check that the seat belt is not twisted. OHI038146 3. Fasten the lap/shoulder belt latch into the buckle. Listen for the distinct “click” sound. 3-29 Safety System Information Position the release button so that it is easy to access in case of an emergency. OLF034076 4. Pull the shoulder portion of the seat belt all the way out. When the shoulder portion of the seat belt is fully extended, it will shift the retractor to the “Automatic Locking” (child restraint) mode. 6. Remove as much slack from the belt as possible by pushing down on the child restraint system while feeding the shoulder belt back into the retractor. 7. Push and pull on the child restraint system to confirm that the seat belt is holding it firmly in place. If it is not, release the seat belt and repeat steps 2 through 6. 8. Double check that the retractor is in the “Automatic Locking” mode by attempting to pull more of the seat belt out of the retractor. If you cannot, the retractor is in the “Automatic Locking” mode. If your CRS (child restraint system) manufacturer instructs or recommends you to use a tether anchor with the lap/ shoulder belt, refer to the previous pages for more information. NOTICE When the seat belt is allowed to retract to its fully stowed position, the retractor will automatically switch from the “Automatic Locking” mode to the emergency lock mode for normal adult usage. WARNING OLF034075 5. Slowly allow the shoulder portion of the seat belt to retract and listen for an audible “clicking” or “ratcheting” sound. This indicates that the retractor is in the “Automatic Locking” mode. If no distinct sound is heard, repeat steps 3 and 4. If the retractor is not in the “Automatic Locking” mode, the child restraint can move when your vehicle turns or stops suddenly. A child can be seriously injured or killed if the child restraint is not properly anchored in the car, including manually pulling the seat belt all the way out to shift the rectractor to the “Automatic Locking” mode. To remove the child restraint, press the release button on the buckle and then pull the lap/shoulder belt out of the restraint and allow the seat belt to retract fully. 3-30 03 AIR BAG - ADVANCED SUPPLEMENTAL RESTRAINT SYSTEM The actual air bags in the vehicle may differ from the illustration. OQX039023N 1. 2. 3. 4. Driver’s front air bag Passenger’s front air bag Side air bag Curtain air bag 3-31 Safety System This vehicle is equipped with an Advanced Supplemental Air Bag System for the driver’s seat and front passenger’s seats. The front air bags are designed to supplement the three-point seat belts. For these air bags to provide protection, the seat belts must be worn at all times when driving. You can be severely injured or killed in an accident if you are not wearing a seat belt. Air bags are designed to supplement seat belts, but do not replace them. Also, air bags are not designed to deploy in every collision. In some accidents, the seat belts are the only restraint protecting you. WARNING AIR BAG SAFETY PRECAUTIONS ALWAYS use seat belts and child restraints - every trip, every time, everyone! Even with air bags, you can be seriously injured or killed in a collision if you are improperly belted or not wearing your seat belt when the air bag inflates. NEVER place a child in any child restraint or booster seat in the front passenger seat. An inflating air bag could forcefully strike the infant or child causing serious or fatal injuries. ABC - Always Buckle Children under age 13 in the back seat. It is the safest place for children of any age to ride. If a child age 13 or older must be seated in the front seat, he or she must be properly belted and the seat should be moved as far back as possible. All occupants should sit upright with the seatback in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor until the vehicle is parked and is turned off. If an occupant is out of position during an accident, the rapidly deploying air bag may forcefully contact the occupant causing serious or fatal injuries. You and your passengers should never sit or lean unnecessarily close to the air bags or lean against the door or center console. Move your seat as far back as possible from front air bags, while still maintaining control of the vehicle. The U.S. National Highway Traffic Safety Administration (NHTSA) recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. 3-32 03 Where Are the Air Bags? Driver’s And Passenger’s Front Air Bags Your vehicle is equipped with an Advanced Supplemental Restraint System (SRS) and lap/shoulder belts at both the driver and passenger seating positions. The SRS consists of air bags which are located in the center of the steering wheel, in the driver’s side lower crash pad below the steering wheel column and the passenger’s side front panel pad above the glove box. The air bags are labeled with the letters “AIR BAG” embossed on the pad covers. „ Driver’s front air bag OQX039024L „ Passenger’s front air bag OQX039035L The purpose of the SRS is to provide the vehicle’s driver and front passengers with additional protection than that offered by the seat belt system alone. The advanced SRS offers the ability to control the air bag inflation within two levels. A first stage level is provided for moderate-severity impacts. A second stage level is provided for more severe impacts. According to the impact severity, the SRS Control Module (SRSCM) controls the air bag inflation. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. WARNING To reduce the risk of serious injury or death from inflating front air bags, take the following precautions: • Seat belts must be worn at all times to help keep occupants positioned properly. • Move your seat as far back as possible from front air bags, while still maintaining control of the vehicle. • Never lean against the door or center console. • Do not allow the front passenger to place their feet or legs on the dashboard. • No objects (such as crash pad cover, cellular phone holder, cup holder, air fresheners or stickers) should be placed over or near the air bag modules on the steering wheel, instrument panel, windshield glass, and the front passenger’s panel above the glove box. Such objects could cause harm if the vehicle is in a crash severe enough to cause the air bags to deploy. 3-33 Safety System Side Air Bags WARNING OIB034021 OQX039048 Your vehicle is equipped with a side air bag in each front seat. The purpose of the air bag is to provide the vehicle’s driver and the front passenger with additional protection than that offered by the seat belt alone. The side air bags are designed to deploy during certain side impact collisions, depending on the crash severity. The side and curtain air bags on both sides of the vehicle may deploy if a rollover or possible rollover is detected. The side air bags are not designed to deploy in all side impact or rollover situations. 3-34 To reduce the risk of serious injury or death from an inflating side air bag, take the following precautions: • Seat belts must be worn at all times to help keep occupants positioned properly. • Do not allow passengers to lean their heads or bodies onto doors, put their arms on the doors, stretch their arms out of the window, or place objects between the doors and seats. • Hold the steering wheel at the 9 o’clock and 3 o’clock positions, to minimize the risk of injuries to your hands and arms. • Do not use any accessory seat covers. This could reduce or prevent the effectiveness of the system. • Do not place any objects over the air bag or between the air bag and yourself. Also, do not attach any objects around the area the air bag inflates such as the door, side door glass, front and rear pillar. • Do not place any objects between the door and the seat. They may become dangerous projectiles if the side air bag inflates. • Do not install any accessories on the side or near the side air bags. • Do not put any objects between the side airbag label and seat cushion. It could cause harm if the vehicle is in a crash severe enough to cause the air bags to deploy. • Do not cause impact to the doors when the ignition switch button is in the ON position as this may cause the side air bags to inflate. • If the seat or seat cover is damaged, have the vehicle checked and repaired by an authorized HYUNDAI dealer. 03 Curtain Air Bags WARNING OQX039052 OQX039053 Curtain air bags are located along both sides of the roof rails above the front and rear doors. They are designed to help protect the heads of the front seat occupants and the rear outboard seat occupants in certain side impact collisions. The curtain air bags are designed to deploy during certain side impact collisions, depending on the crash severity. The side and curtain air bags on both sides of the vehicle may deploy if a rollover or possible rollover is detected. The curtain air bags are not designed to deploy in all side impact or rollover situations. To reduce the risk of serious injury or death from an inflating curtain air bag, take the following precautions: • All seat occupants must wear seat belts at all times to help keep occupants positioned properly. • Properly secure child restraints as far away from the door as possible. • Do not place any objects over the air bag. Also, do not attach any objects around the area the air bag inflates such as the door, side door glass, front and rear pillar, roof side rail. • Do not hang other objects except clothes, especially hard or breakable objects. In an accident, it may cause vehicle damage or personal injury. • Do not allow passengers to lean their heads or bodies onto doors, put their arms on the doors, stretch their arms out of the window, or place objects between the doors and seats. • Do not attempt to open or repair the side curtain air bags yourself. If necessary, have the air bag inspected by an authorized HYUNDAI dealer. 3-35 Safety System How Does the Air Bag System Operate? SRS warning light The SRS (Supplement Restraint System) air bag warning light on the instrument panel displays the air bag symbol depicted in the illustration. The system checks the air bag electrical system for malfunctions. The light indicates that there is a potential malfunction with your air bag system, which could include your side and curtain air bags used for rollover protection. OQX039027 The SRS consists of the following components: 1. Driver’s front air bag module 2. Passenger’s front air bag module 3. Side air bag modules 4. Curtain air bag modules 5. Retractor pre-tensioner 6. Air bag warning light 7. SRS control module (SRSCM)/Rollover sensor 8. Front impact sensors 9. Side impact sensors 10. Side pressure sensors 11. Occupant classification system The SRSCM (Supplemental Restraint System Control Module) continually monitors all SRS components while the ignition switch is in the ON position to determine if a crash impact is severe enough to require air bag deployment or pre-tensioner seat belt deployment. 3-36 WARNING If your SRS malfunctions, the air bag may not inflate properly during an accident, increasing the risk of serious injury or death. If any of the following conditions occur, your SRS is malfunctioning: • The light does not turn on for approximately six seconds when the Engine Start/Stop button is in the ON position. • The light stays on after illuminating for approximately six seconds. • The light comes on while the vehicle is in motion. • The light blinks when the engine is running. Have an authorized HYUNDAI dealer inspect the SRS as soon as possible if any of these conditions occur. 03 During a frontal collision, sensors will detect the vehicle’s deceleration. If the rate of deceleration is high enough, the control unit will inflate the front air bags. The front air bags help protect the driver and front passenger by responding to frontal impacts in which seat belts alone cannot provide adequate restraint. When needed, the side air bags help provide protection in the event of a side impact or rollover. • Air bags are activated (able to inflate if necessary) only when the Engine Start/Stop button is in the ON position. • Air bags inflate in the event of certain frontal or side collisions to help protect the occupants from serious physical injury. • Generally, air bags are designed to inflate based upon the severity of a collision, its direction, etc. These two factors determine whether the sensors produce an electronic deployment/inflation signal. • The front air bags will completely inflate and deflate in an instant. It is virtually impossible for you to see the air bags inflate during an accident. It is much more likely that you will simply see the deflated air bags hanging out of their storage compartments after the collision. • In addition to inflating in certain side collisions, vehicles equipped with a rollover sensor, side and curtain air bags will inflate if the sensing system detects a rollover. When a rollover is detected, side and curtain air bags will remain inflated longer to help provide protection from ejection, especially when used in conjunction with the seat belts. • To help provide protection, the air bags must inflate rapidly. The speed of air bag inflation is a consequence of extremely short time in which to inflate the air bag between the occupant and the vehicle structures before the occupant impacts those structures. This speed of inflation reduces the risk of serious or lifethreatening injuries and is thus a necessary part of air bag design. However, the rapid air bag inflation can also cause injuries which can include facial abrasions, bruises and broken bones because the inflation speed also causes the air bags to expand with a great deal of force. • There are even circumstances under which contact with the air bag can cause fatal injuries, especially if the occupant is positioned excessively close to the air bag. You can take steps to help reduce the risk of being injured by an inflating air bag. The greatest risk is sitting too close to the air bag. An air bag needs about 10 inches (25 cm) of space to inflate. NHTSA recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. 3-37 Safety System WARNING To reduce the risk of serious injury or death from an inflating air bag, take the following precautions: • NEVER place a child restraint in the front passenger seat. Always properly restrain children under age 13 in the rear seats of the vehicle. • Adjust the front passenger’s and driver’s seats as far to the rear as possible while allowing you to maintain full control of the vehicle. • Hold the steering wheel with hands at the 9 o’clock and 3 o’clock positions. • Never place anything or anyone between the air bag and the seat occupant. • Do not allow the front passenger to place their feet or legs on the dashboard. „ Driver’s front air bag (1) ODN8039077L When the SRSCM detects a sufficiently severe impact to the front of the vehicle, it will automatically deploy the front air bags. „ Driver’s front air bag (2) ODN8039078L Upon deployment, tear seams molded directly into the pad covers will separate under pressure from the expansion of the air bags. Further opening of the covers allows full inflation of the air bags. A fully inflated air bag, in combination with a properly worn seat belt, slows the driver or the front passenger forward motion, reducing the risk of head and chest injury. 3-38 03 What to Expect After an Air Bag Inflates „ Driver’s front air bag (3) After a frontal or side air bag inflates, it will deflate very quickly. Air bag inflation will not prevent the driver from seeing out of the windshield or being able to steer. Curtain air bags may remain partially inflated for some time after they deploy. ODN8039079L „ Passenger’s front air bag ODN8039080L After complete inflation, the air bag immediately starts deflating, enabling the driver to maintain forward visibility and the ability to steer or operate other controls. WARNING To prevent objects from becoming dangerous projectiles when the passenger’s air bag inflates: • Do not install or place any objects (drink holder, CD holder, stickers, etc.) on the front passenger’s panel above the glove box where the passenger’s air bag is located. • Do not install a container of liquid air freshener near the instrument cluster or on the instrument panel surface. WARNING After an air bag inflates, take the following precautions: • Open your windows and doors as soon as possible after impact to reduce prolonged exposure to the smoke and powder released by the inflating air bag. • Do not touch the air bag storage area’s internal components immediately after an air bag has inflated. The parts that come into contact with an inflating air bag may be very hot. • Always wash exposed skin areas thoroughly with cold and mild soap. • Always have an authorized HYUNDAI dealer replace the air bag immediately after deployment. Air bags are designed to be used only once. 3-39 Safety System Noise And Smoke from Inflating Air Bag When the air bags inflate, they make a loud noise and may produce smoke and powder in the air inside of the vehicle. This is normal and is a result of the ignition of the air bag inflator. After the air bag inflates, you may feel substantial discomfort in breathing because of the contact of your chest with both the seat belt and the air bag, as well as from breathing the smoke and powder. The powder may aggravate asthma for some people. If you experience breathing problems after an air bag deployment, seek medical attention immediately. Though the smoke and powder are nontoxic, they may cause irritation to the skin, eyes, nose, throat, etc. If this is the case, wash and rinse with cold water immediately and seek medical attention if the symptoms persist. Occupant Classification System (OCS) OQX039025L Your vehicle is equipped with an Occupant Classification System (OCS) in the front passenger’s seat. Main Components of the Occupant Classification System • A detection device located within the front passenger seat cushion. • Electronic system to help determine whether the passenger air bag systems should be activated or deactivated. • An indicator light located on the instrument panel which illuminates the words “PASSENGER AIR BAG OFF” indicating the front passenger air bag system is deactivated. • The instrument panel air bag indicator light is interconnected with the OCS. The OCS is designed to help detect the presence of a properly-seated front passenger and determine if the passenger’s front air bag should be enabled (may inflate) or not. The purpose is to help reduce the risk of injury or death from an inflating air bag to certain front passenger seat occupants, such as children, by requiring the air bag to be automatically turned OFF. 3-40 03 For example, if a child restraint of the type specified in the regulations is on the seat, the occupant classification sensor can detect it and cause the air bag to turn OFF. Front passenger seat adult occupants who are properly seated and wearing the seat belt properly, should not cause the passenger air bag to be automatically turned OFF. For small adults it may be turned OFF, however, if the occupant does not sit in the seat properly (for example, by not sitting upright, by sitting on the edge of the seat, or by otherwise being out of position), this could cause the sensor to turn the air bag OFF. You will find the “PASSENGER AIR BAG OFF” indicator on the center fascia panel. This system detects the conditions 1-4 in the following table and activates or deactivates the front passenger air bag based on these conditions. Always be sure that you and all vehicle occupants are seated properly and wearing the seat belt properly for the most effective protection by the air bag and the seat belt. The OCS may not function properly if the passenger takes actions which can affect the classification system. These include: • Failing to sit in an upright position. • Leaning against the door or center console. • Sitting towards the sides of the front of the seat. • Putting their legs on the dashboard or resting them on other locations which reduce the passenger weight on the front seat. • Wearing the seat belt improperly. • Reclining the seatback. • Wearing a thick cloth like ski wear or hip protection wear. • Putting an additional thick cushion on the seat. • Putting electrical devices (for example, notebook, satellite radio) on the seat with inverter charging. 3-41 Safety System Condition and operation in the front passenger Occupant Classification System Indicator/Warning light Condition detected by the occupant classification system Devices “PASSENGER AIR BAG OFF” indicator light SRS warning light Front passenger air bag 1. Adult *1 Off Off Activated 2. Infant *2 or child restraint system with 12 months old On Off Deactivated 3. Unoccupied On Off Deactivated 4. Malfunction in the system Off On Activated *3 *4 The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. *2 : Do not allow children to ride in the front passenger seat. When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending upon his/her physique or sitting position. *3 : Never install a child restraint system on the front passenger seat. *4 : The PASSENGER AIR BAG “OFF” indicator may turn on or off when a child above 12 months to 12 years old (with or without child restraint system) sits in the front passenger seat. This is a normal condition. *1 : 3-42 03 WARNING Riding in an improper position or placing weight on the front passenger’s seat when it is unoccupied by a passenger adversely affects the OCS. To reduce the risk of serious injury or death: • NEVER put a heavy load in the front seat or seatback pocket, or hang any items on the front passenger seat. OVQ036013NB OLMB033100 OLMB033101 OLMB033103 • NEVER place your feet on the front passenger seatback. • NEVER sit with your hips shifted towards the front of the seat. • NEVER ride with the seatback reclined when the vehicle is moving. • NEVER place your feet or legs on the dashboard. OLMB033102 3-43 Safety System • NEVER lean on the door or center console or sit on one side of the front passenger seat. OLMB033104 ODH035900K ODH035901K OQX039046 • Do not sit on the passenger seat wearing heavily padded clothes such as ski wear and hip protector. • Do not use car seat accessories such as thick blankets and cushions which cover up the car seat surface. • Do not place electronic devices such as laptops, DVD player, or conductive materials such as water bottles on the passenger seat. • Do not use electronic devices such as laptops and satellite radios which use inverter chargers. • If large quantity of liquid has been spilled on the passenger seat, the air bag warning light may illuminate or malfunction. Therefore, make sure the seat has been completely dried before driving the vehicle. OQX039047 • Do not place sharp objects on the front passenger seat. These may damage the occupant detection system, if they puncture the seat cushion. • Do not place any items under the front passenger seat. • When changing or replacing the seat or seat cover, use original items only. The OCS has been developed based on using original HYUNDAI car seats only. Altering or changing the authentic parts may result in system malfunction and increase risk of injury when in collision. Any of the above could interfere with the proper operation of the OCS sensor thereby increasing the risk of an injury in an accident. 3-44 03 WARNING B990A01O Proper seated position for OCS If the “PASSENGER AIR BAG OFF” indicator is on when an adult is seated in the front passenger seat, place the Engine Start/Stop button in the OFF position and ask the passenger to sit properly (sitting upright with the seat back in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor). Restart the engine and have the person remain in that position. This will allow the system to detect the person and to enable the passenger air bag. If the “PASSENGER AIR BAG OFF” indicator is still on, ask the passenger to move to the rear seat. Never allow an adult passenger to ride in the front passenger seat when the “PASSENGER AIR BAG OFF” indicator is illuminated. During a collision, the air bag will not inflate if the indicator is illuminated. Have your passenger reposition themselves in the seat. If the “PASSENGER AIR BAG OFF” indicator remains illuminated after the passenger repositions themselves properly and the vehicle is restarted, have the passenger move to the rear seat because the air bag will not inflate. NOTICE The “PASSENGER AIR BAG OFF” indicator illuminates for approximately 4 seconds after the Engine Start/ Stop button is in the ON position or after the engine is started. If the front passenger seat is occupied, the OCS will then classify the front passenger after several more seconds. 3-45 Safety System Do Not Install a Child Restraint in the Front Passenger’s Seat Why Didn’t My Air Bag Go Off in a Collision? Air bags are not designed to inflate in every collision. There are certain types of accidents in which the air bag would not be expected to provide additional protection. These include rear impacts, second or third collisions in multiple impact accidents, as well as low speed impacts. Damage to the vehicle indicates a collision energy absorption, and is not an indicator of whether or not an air bag should have inflated. 1JBH3051 Even though your vehicle is equipped with the OCS, never install a child restraint in the front passenger’s seat. An inflating air bag can forcefully strike a child or child restraint resulting in serious or fatal injury. WARNING • NEVER place a rear-facing or frontfacing child restraint in the front passenger’s seat of the vehicle. • An inflating frontal air bag could forcefully strike a child resulting in serious injury or death. • Always properly restrain children in an appropriate child restraint in the rear seat of the vehicle. 3-46 Air Bag Collision Sensors WARNING To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death: • Do not hit or allow any objects to impact the locations where air bags or sensors are installed. • Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. • Do not install bumper guards or replace the bumper with a nongenuine HYUNDAI parts. This may adversely affect the collision and air bag deployment performance. • Place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed to prevent inadvertent air bag deployment. • Have all air bag repairs conducted by an authorized HYUNDAI dealer. 03 OQX039029L/OQX039030L/OQX039028L/OQX039036L/OQXI039029 1. 2. 3. 4. SRS control module/Rollover sensor Front impact sensor Side pressure sensor Side impact sensor 3-47 Safety System Air Bag Inflation Conditions OQXI039030 Front air bags Front air bags are designed to inflate in a frontal collision depending on the severity of impact of the front collision. Side and curtain air bags Side and curtain air bags are designed to inflate when an impact is detected by side collision sensors depending on the severity of impact resulting from a side impact collision. Although the driver’s and front passenger’s air bags are designed to inflate only in frontal collisions, they also may inflate in other types of collisions if the front impact sensors detect a sufficient impact. Side and curtain air bags are designed to inflate only in side impact collisions or rollover situations, but they may inflate in other collisions if the side impact sensors detect a sufficient impact. If the vehicle chassis is impacted by bumps or objects on unimproved roads, the air bags may deploy. Drive carefully on unimproved roads or on surfaces not designed for vehicle traffic to prevent unintended air bag deployment. Air Bag Non-inflation Conditions OQX039042L OQXI039031 OQX039053 3-48 In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts. 03 OQXI039032 Front air bags are not designed to inflate in rear collisions, because occupants are moved backward by the force of the impact. In this case, inflated air bags would not provide any additional benefit. OQX039042L Front air bags may not inflate in side impact collisions, because occupants move in the direction of the collision, and thus in side impacts, front air bag deployment would not provide additional occupant protection. However, side and curtain air bags may inflate depending on the severity of impact. OQX039040L In an angled collision, the force of impact may direct the occupants in a direction where the air bags would not be able to provide any additional benefit, and thus the sensors may not deploy any air bags. OQXI039034 Just before impact, drivers often brake heavily. Such heavy braking lowers the front portion of the vehicle causing it to “ride” under a vehicle with a higher ground clearance. Air bags may not inflate in this “underride” situation because deceleration forces that are detected by sensors may be significantly reduced by such “underride” collisions. 3-49 Safety System SRS Care OQXI039035 Front air bags may not inflate in rollover accidents because air bag deployment may not provide protection to the occupants. However, side and curtain air bags may inflate when the vehicle is rolled over by a side impact collision. OQX039043L Air bags may not inflate if the vehicle collides with objects such as utility poles or trees, where the point of impact is concentrated and the collision energy is absorbed by the vehicle structure. 3-50 The SRS is virtually maintenance-free and there are no parts you can safely service by yourself. If the SRS air bag warning light does not illuminate when the ignition switch is in the ON position, or continuously remains on, have your vehicle immediately inspected by an authorized HYUNDAI dealer. Any work on the SRS system, such as removing, installing, repairing, or any work on the steering wheel, the front passenger’s panel, front seats and roof rails must be performed by an authorized HYUNDAI dealer. Improper handling of the SRS system may result in serious personal injury. WARNING To reduce the risk of serious injury or death, take the following precautions: • Do not attempt to modify or disconnect the SRS components or wiring, including the addition of any kind of badges to the pad covers or modifications to the body structure. • Do not place objects over or near the air bag modules on the steering wheel, instrument panel, or the front passenger’s panel above the glove box. • Clean the air bag pad covers with a soft cloth moistened with plain water. Solvents or cleaners could adversely affect the air bag covers and proper deployment of the system. • Always have inflated air bags replaced by an authorized HYUNDAI dealer. • If components of the air bag system must be discarded, or if the vehicle must be scrapped, certain safety precautions must be observed. Consult an authorized HYUNDAI dealer for the necessary information. Failure to follow these precautions could increase the risk of personal injury. 03 Additional Safety Precautions Passengers should not move out of or change seats while the vehicle is moving. A passenger who is not wearing a seat belt during a crash or emergency stop can be thrown against the inside of the vehicle, against other occupants, or be ejected from the vehicle. Do not use any accessories on seat belts. Devices claiming to improve occupant comfort or reposition the seat belt can reduce the protection provided by the seat belt and increase the chance of serious injury in a crash. Do not modify the front seats. Modification of the front seats could interfere with the operation of the supplemental restraint system sensing components or side air bags. Do not place items under the front seats. Placing items under the front seats could interfere with the operation of the supplemental restraint system sensing components and wiring harnesses. Do not cause impact to the doors. Impact to the doors when the Engine Start/Stop button is in the ON position may cause the air bags to inflate. Modifications to accommodate disabilities. If you require modification to your vehicle to accommodate a disability, contact the HYUNDAI Customer Connect Center at 800-6335151. Air Bag Warning Labels OQX039031N Air bag warning labels, required by the U.S. National Highway Traffic Safety Administration (NHTSA), are attached to alert the driver and passengers of potential risks of the air bag system. Be sure to read all of the information about the air bags that are installed on your vehicle in this Owners Manual. Adding Equipment to or Modifying Your Air Bag equipped Vehicle If you modify your vehicle by changing your vehicle’s frame, bumper system, front end or side sheet metal or ride height, this may affect the operation of your vehicle’s air bag system. 3-51 4. Instrument Cluster Instrument Cluster............................................................................................. 4-4 Instrument Cluster Control...........................................................................................4-5 Adjusting Instrument Cluster Illumination................................................................4-5 Gauges and Meters.......................................................................................................4-5 Speedometer..............................................................................................................4-5 Tachometer................................................................................................................ 4-6 Engine Coolant Temperature Gauge........................................................................ 4-6 Fuel Gauge................................................................................................................. 4-6 Outside Temperature Gauge...................................................................................... 4-7 Odometer.................................................................................................................... 4-7 Range.......................................................................................................................... 4-8 Transmission Shift Indicator........................................................................................ 4-8 Intelligent Variable Transmission (IVT)..................................................................... 4-8 Warning and Indicator Lights...................................................................................... 4-9 Air Bag Warning Light................................................................................................ 4-9 Seat Belt Warning Light............................................................................................. 4-9 Parking Brake & Brake Fluid Warning Light.............................................................. 4-9 Anti-lock Brake System (ABS) Warning Light.......................................................... 4-10 Electronic Brake Force Distribution (EBD) System Warning Light........................ 4-10 Motor Driven Power Steering (MDPS) Warning Light............................................. 4-11 Malfunction Indicator Lamp (MIL)............................................................................ 4-11 Charging System Warning Light.............................................................................. 4-12 Engine Oil Pressure Warning Light.......................................................................... 4-12 Low Fuel Level Warning Light.................................................................................. 4-12 Master Warning Light............................................................................................... 4-13 Low Tire Pressure Warning Light............................................................................. 4-13 Electronic Stability Control (ESC) Indicator Light.................................................. 4-14 Electronic Stability Control (ESC) OFF Indicator Light........................................... 4-14 Immobilizer Indicator Light (without Smart Key)................................................... 4-14 Immobilizer Indicator Light (with Smart Key)......................................................... 4-15 Turn Signal Indicator Light....................................................................................... 4-15 Headlight Warning Light.......................................................................................... 4-15 4 4 High Beam Indicator Light....................................................................................... 4-16 Light ON Indicator Light........................................................................................... 4-16 High Beam Assist (HBA) Indicator Light.................................................................. 4-16 Forward Safety Warning Light................................................................................. 4-16 Lane Safety Light...................................................................................................... 4-16 Cluster Display Messages............................................................................................4-17 Shift to P or N to Start Engine(for Smart Key System and Intelligent Variable Transmission (IVT))....................................................................................................4-17 Shift to P (for Smart Key System)..............................................................................4-17 Low Key Battery(for Smart Key System)...................................................................4-17 Press Brake Pedal to Start Engine(for Smart Key System)......................................4-17 Key Not in Vehicle(for Smart Key System)...............................................................4-17 Key Not Detected(for Smart Key System)................................................................4-17 Press START Button Again(for Smart Key System)..................................................4-17 Battery Discharging Due to External Electrical Devices.........................................4-17 Press Clutch Pedal to Start Engine (for Smart Key System and Manual Transmission)............................................................................................................ 4-18 Press START Button with Key(for Smart Key System)............................................. 4-18 Check BRAKE SWITCH Fuse(for Smart Key System).............................................. 4-18 Door, Hood, Liftgate Open Indicator....................................................................... 4-18 Sunroof Open............................................................................................................ 4-18 Icy Road Warning Light............................................................................................ 4-19 Low Pressure............................................................................................................. 4-19 Lights Mode..............................................................................................................4-20 Wiper.........................................................................................................................4-20 Low Fuel....................................................................................................................4-20 Engine Overheated...................................................................................................4-20 Check Headlight.......................................................................................................4-20 4. Instrument Cluster Cluster Display.................................................................................................. 4-21 Cluster Display Control................................................................................................4-21 Cluster Display Modes................................................................................................4-22 Quick Guide Help......................................................................................................4-23 Trip Computer Mode................................................................................................4-23 Drive Assist Mode.....................................................................................................4-23 Master Warning Mode..............................................................................................4-24 User Settings Mode..................................................................................................4-24 Trip Computer...................................................................................................4-31 Trip Modes................................................................................................................. 4-31 Drive Info...................................................................................................................4-32 Since Refueling.........................................................................................................4-32 Accumulated Info.....................................................................................................4-32 Auto Stop...................................................................................................................4-32 4 Instrument Cluster INSTRUMENT CLUSTER OQX042062N 1. Speedometer 4. Engine coolant temperature gauge 2. Tachometer 5. Warning and indicator lights 3. Fuel gauge 6. Cluster display (including trip computer) The actual cluster in the vehicle may differ from the illustration. For more information, refer to the "Gauges and Meters" in this chapter. 4-4 04 Instrument Cluster Control Adjusting Instrument Cluster Illumination OUS4041035L OQX049010N When the vehicle's parking lamps or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination. When pressing the illumination control button, the interior switch illumination intensity is also adjustable. • The brightness of the instrument panel illumination is displayed. • If the brightness reaches the maximum or minimum level, a chime will sound. For information regarding the illumination setting on your audio display, refer to the "Setup" section of your Audio or Navigation manual. Gauges and Meters Speedometer WARNING Never adjust the instrument cluster while driving. Doing so could lead to driver distraction which may cause an accident and lead to vehicle damage, serious injury, or death. OQX042006N The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h). 4-5 Instrument Cluster NOTICE Tachometer If the gauge pointer moves beyond the normal range area toward the "H" position, it indicates overheating that may damage the engine. Do not continue driving with an overheated engine. If your engine overheats, refer to "If the Engine Overheats" in chapter 7. WARNING OQX042008N The tachometer indicates the approximate number of engine revolutions per minute (RPM). Use the tachometer to select the correct shift points and to prevent lugging and/ or over-revving the engine. Never remove the radiator cap or reservoir cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir. Fuel Gauge NOTICE Do not operate the engine within the tachometer's RED ZONE. This may cause severe engine damage. Information When entering the tachometer's RED ZONE, the number color of the tachometer is changed to RED. Engine Coolant Temperature Gauge OQX042043N This gauge indicates the approximate amount of fuel remaining in the fuel tank. Information OQX042042N This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position. 4-6 • The fuel tank capacity is given in chapter 2. • The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty. • On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank. 04 WARNING Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the "E (Empty)" level. NOTICE Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire and damage the catalytic converter. Outside Temperature Gauge For vehicles equipped with Automatic Climate Control, you can also: - Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds Both the temperature unit on the cluster display and climate control screen will change. Information The infotainment system may change after software updates. For more information, refer to the user's manual provided in the infotainment system and the quick reference guide. Odometer OPD047463N This gauge indicates the current outside air temperature by 1°F (1°C). • Temperature range: -40°F ~ 140°F (-40°C ~ 60°C) Note that the temperature indicated on the cluster display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.) You can change the temperature unit from °F to °C or °C to °F in the User Settings mode in the cluster: • Go to User Settings Mode → Other → Temperature Unit. OQX042061N The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed. 4-7 Instrument Cluster Transmission Shift Indicator Range Intelligent Variable Transmission (IVT) (if equipped) OQX042056N • The range is the estimated distance the vehicle can be driven with the remaining fuel. • If the estimated distance is below 1 mi. (1 km), the trip computer will display "----" as range. Information • If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly. • The range may differ from the actual driving distance as it is only an estimate of the available driving range for the vehicle and driving conditions. • The trip computer may not register additional fuel if less than 1.6 gallon (6 liters) of fuel are added to the vehicle. • The range may vary significantly based on driving conditions, driving habits, and condition of the vehicle. 4-8 OAX041008 This indicator displays which gear position is selected. • Park : P • Reverse : R • Neutral : N • Drive : D • Manual shift Mode : 1, 2, 3, 4, 5, 6 04 Warning and Indicator Lights Information Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. Air Bag Warning Light This warning light illuminates: • When you place the ignition switch to the ON position. - The air bag warning light illuminates for about 6 seconds and then turns off when all checks have been performed • The air bag warning light will remain illuminated if there is a malfunction with the Safety Restraint System (SRS) air bag operation. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. Seat Belt Warning Light This warning light informs the driver that the seat belt is not fastened. For more information, refer to “Seat Belts” in chapter 3. Parking Brake & Brake Fluid Warning Light This warning light illuminates: • When you place the ignition switch to the ON position. - The parking brake light illuminates for about 3 seconds and will then turn off once the parking brake is released. • Whenever the parking brake is applied. • Whenever the brake fluid level in the reservoir is low. - If the warning light illuminates with the parking brake released, it indicates that the brake fluid level in the reservoir is low. If the brake fluid level in the reservoir is low: 1. Drive carefully to the nearest safe location and stop your vehicle. 2. With the engine stopped, check the brake fluid level immediately and add fluid as required (For more information, refer to "Brake Fluid" in chapter 8). After adding brake fluid, check all brake components for fluid leaks. If a brake fluid leak is found, or if the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have the vehicle inspected by an authorized HYUNDAI dealer. 4-9 Instrument Cluster Dual-diagonal braking system Your vehicle is equipped with dualdiagonal braking systems. This means you still have braking on two wheels even if one of the dual systems should fail. With only one of the dual systems working, more than normal pedal travel and greater pedal pressure is required to stop the vehicle. Also, the vehicle will not stop in as short a distance with only a portion of the brake system working. If the brakes fail while you are driving, shift to a lower gear for additional engine braking and stop the vehicle as soon as it is safe to do so. WARNING Parking Brake & Brake Fluid Warning Light Driving the vehicle with a warning light ON is dangerous. If the Parking Brake & Brake Fluid Warning Light illuminates with the parking brake released, it indicates that the brake fluid level is low. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. Anti-lock Brake System (ABS) Warning Light This warning light illuminates: • When you place the ignition switch to the ON position. - The ABS warning light illuminates for about 3 seconds and then turns off. • Whenever there is a malfunction with the ABS. Note that the hydraulic braking system will still be operational even if there is a malfunction with the ABS. Electronic Brake Force Distribution (EBD) System Warning Light These two warning lights illuminate at the same time while driving: When the ABS and regular brake system may not work normally. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. WARNING Electronic Brake Force Distribution (EBD) System Warning Light When both ABS and Parking Brake & Brake Fluid Warning Lights are on, the brake system will not work normally and you may experience an unexpected and dangerous situation during sudden braking. In this case, avoid high speed driving and abrupt braking. Have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. 4-10 04 Information - Electronic Brake Force Distribution (EBD) System Warning Light When the ABS Warning Light is on or both ABS and Parking Brake & Brake Fluid Warning Lights are on, the speedometer, odometer, or tripmeter may not work. Also, the MDPS Warning Light may illuminate and the steering effort may increase or decrease. In this case, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. Motor Driven Power Steering (MDPS) Warning Light This warning light illuminates: • When you place the ignition switch to the ON position. - The Motor Driven Power Steering Warning light illuminates for about 3 seconds and then goes off. • Whenever there is a malfunction with the MDPS. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. Malfunction Indicator Lamp (MIL) This warning light illuminates: • When you place the ignition switch to the ON position. - The malfunction indicator light illuminates for about 3 seconds and then goes off. • Whenever there is a malfunction with either the emission control system or the engine or the vehicle powertrain. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. NOTICE Driving with the Malfunction Indicator Lamp (MIL) on may cause damage to the emission control system which could affect drivability and/or fuel economy. NOTICE If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power. In this case, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. 4-11 Instrument Cluster Charging System Warning Light When this warning light illuminates while the engine is running, the battery is not being charged. Immediately turn OFF all electrical accessories. Try not to use electrically operated controls, such as the power windows. Keep the engine running. Have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. Engine Oil Pressure Warning Light This warning light illuminates: When the engine oil pressure is low. If the engine oil pressure is low: 1. Drive carefully to the nearest safe location and stop your vehicle. 2. Turn the engine off and check the engine oil level (For more information, refer to "Engine Oil" in chapter 8). If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. Continued driving with the warning light on may cause engine failure. 4-12 NOTICE If the engine is not turned OFF immediately after the Engine Oil Pressure Warning Light is illuminated, severe damage could occur. Low Fuel Level Warning Light This warning light illuminates: When the fuel tank is nearly empty. Add fuel as soon as possible. NOTICE Driving with the Low Fuel Level warning light on or with the fuel level below "E" can cause the engine to misfire and damage the catalytic converter. 04 Master Warning Light This indicator light illuminates: When there is a malfunction in operation in any of the following systems: • Exterior lamp (if equipped) • Blind-Spot Collision Warning (if equipped) • Tire Pressure Monitoring System (TPMS) To identify the details of the warning, look at the cluster display. Low Tire Pressure Warning Light (if equipped) This warning light illuminates: • When you place the ignition in the ON position. - It illuminates for approximately 3 seconds and then goes off. • When one or more of your tires are significantly underinflated. (The location of the underinflated tires is displayed on the cluster display.) For more information, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 7. This warning light remains ON after blinking for approximately 60 seconds, or repeatedly blinks ON and OFF in 3 second intervals: When there is a malfunction with the TPMS. In this case, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. For more information, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 7. WARNING Safe Stopping • The TPMS cannot alert you to severe and sudden tire damage caused by external factors. • If you notice any vehicle instability, immediately take your foot off the accelerator pedal, apply the brakes gradually with light force, and slowly move to a safe position off the road. 4-13 Instrument Cluster Electronic Stability Control (ESC) Indicator Light Electronic Stability Control (ESC) OFF Indicator Light This indicator light illuminates: • When you place the ignition switch to the ON position. - The Electronic Stability Control indicator light illuminates for about 3 seconds and then goes off. • Whenever there is a malfunction with the ESC system. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. This indicator light illuminates: • When you place the ignition switch to the ON position. - It illuminates for approximately 3 seconds and then goes off. • When you deactivate the ESC system by pressing the ESC OFF button. For more information, refer to “Electronic Stability Control (ESC)” in chapter 6. This indicator light blinks: While the ESC is operating. For more information, refer to “Electronic Stability Control (ESC)” in chapter 6. 4-14 Immobilizer Indicator Light (without Smart Key) (if equipped) This indicator light illuminates: • When the vehicle detects the immobilizer in the key with the ignition switch in the ON position. - At this time, you can start the engine. - The indicator light goes off after starting the engine. This indicator light blinks: • When there is a malfunction with the immobilizer system. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. 04 Immobilizer Indicator Light (with Smart Key) (if equipped) Turn Signal Indicator Light This indicator light illuminates for up to 30 seconds: When the vehicle detects the smart key in the vehicle with the Engine Start/Stop button in the ACC or ON position. • Once the smart key is detected, you can start the engine. • The indicator light goes off after starting the engine. This indicator light blinks: When you operate the turn signal indicator stalk. This indicator light blinks for a few seconds: When the smart key is not in the vehicle. • If the smart key is not detected, you cannot start the engine. This indicator light illuminates for 2 seconds and goes off: If the smart key is in the vehicle and the Engine Start/Stop button is ON, but the vehicle cannot detect the smart key. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. This indicator light blinks: When there is a malfunction with the immobilizer system. In this case, have the vehicle inspected by an authorized HYUNDAI dealer. If any of the following occur, there may be a malfunction with the turn signal system. • The turn signal indicator light illuminates but does not blink • The turn signal indicator light blinks rapidly • The turn signal indicator light does not illuminate at all If any of these conditions occur, have your vehicle inspected by an authorized HYUNDAI dealer. Headlight Warning Light (if equipped) This warning light illuminates: If one of the exterior bulbs (headlight, stop lamp, high mounted stop lamp) is not operating properly. One of the bulbs may need to be replaced. If the vehicle is equipped with LED headlights, have the vehicle inspected by an authorized HYUNDAI dealer. Information When replacing the bulb, use the same wattage bulb. For more details, refer to "Light bulbs" in chapter 8. 4-15 Instrument Cluster High Beam Indicator Light Forward Safety Warning Light (if equipped) This indicator light illuminates: • When the headlights are on and in the high beam position. • When the turn signal lever is pulled into the Flash-to-Pass position. This warning light illuminates: • When you set the ignition switch to the ON position. - The Forward Safety warning light illuminates for approximately 3 seconds and then goes off. • [Continuously Yellow] When Forward safety/Forward cross-traffic safety of Forward Collision-Avoidance Assist is Off/Disabled/Malfunction. • [Blinking Red] When Forward safety/ Forward cross-traffic safety of Forward Collision-Avoidance Assist is operating If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. For more information, refer to "Forward Collision-Avoidance Assist (FCA)" in chapter 6. Light ON Indicator Light This indicator light illuminates: When the tail lights or headlights are on. High Beam Assist (HBA) Indicator Light (if equipped) This indicator light illuminates: • When the high-Beam is on with the light switch in the AUTO light position. - White: When High Beam Assist is ready to operate. - Green: When High Beam Assist is operating. • If your vehicle detects oncoming or preceding vehicles, High Beam Assist (HBA) will switch the high beam to low beam automatically. For more information, refer to "High Beam Assist (HBA)" in chapter 5. 4-16 Lane Safety Light (if equipped) This indicator light illuminates: • [Green] When Lane Keeping Assist operating conditions are satisfied. • [Grey] When Lane Keeping Assist operating conditions are not satisfied. • [Yellow] Whenever there is a malfunction with Lane Keeping Assist. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible. For more information, refer to "Lane Keeping Assist (LKA)" in chapter 6. 04 Cluster Display Messages Shift to P or N to Start Engine (for Smart Key System and Intelligent Variable Transmission (IVT)) This warning message is displayed if you try to start the engine with the shift lever not in the P (Park) or N (Neutral) position. Information You can start the engine with the shift lever in the N (Neutral) position. But, for your safety, start the engine with the shift lever in the P (Park) position. Shift to P (for Smart Key System) This message is displayed if you try to turn off the engine without the shift lever in P (Park) position. If this occurs, the Engine Start/Stop button turns to the ACC position (If you press the Engine Start/Stop button once more, it will turn to the ON position). Low Key Battery (for Smart Key System) This warning message is displayed if the battery of the smart key is discharged while changing the Engine Start/Stop button to the OFF position. Press Brake Pedal to Start Engine (for Smart Key System) This warning message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal. You can start the vehicle by depressing the brake pedal and then pressing the Engine Start/Stop button. Key Not in Vehicle (for Smart Key System) This warning message is displayed if the smart key is not in the vehicle when you press the Engine Start/Stop button. When attempting to start the vehicle, always have the smart key with you. Key Not Detected (for Smart Key System) This warning message is displayed if the smart key is not detected when you press the Engine Start/Stop button. Press START Button Again (for Smart Key System) This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed. If this occurs, attempt to start the engine by pressing the Engine Start/Stop button again. If the warning message appears each time you press the Engine Start/Stop button, have your vehicle inspected by an authorized HYUNDAI dealer. Battery Discharging Due to External Electrical Devices (if equipped) This message is displayed if the battery voltage is weak due to any non-factory electrical accessories (for example, dashboard camera) while parking. Be careful that the battery is not discharged. If the warning message appears after removing the non-factory electrical accessories, have the vehicle inspected by an authorized HYUNDAI dealer. 4-17 Instrument Cluster Press Clutch Pedal to Start Engine (for Smart Key System and Manual Transmission) Door, Hood, Liftgate Open Indicator This warning message is displayed if the Engine Start/Stop button is in the ACC position twice by pressing the button repeatedly without depressing the clutch pedal. Depress the clutch pedal to start the engine. Press START Button with Key (for Smart Key System) OQX042014N This warning message is displayed if you press the Engine Start/Stop button while the warning message "Key not detected" is displayed. At this time, the immobilizer indicator light blinks. This warning is displayed if any door or the hood or the liftgate is left open. The warning will indicate which door is open in the display. Check BRAKE SWITCH Fuse (for Smart Key System) Before driving the vehicle, you should confirm that the door/hood/liftgate is fully closed. Also, check there is no door/hood/liftgate open warning light or message displayed on the instrument cluster. This warning message is displayed if the brake switch fuse is disconnected. You need to replace the fuse with a new one before starting the engine. If that is not possible, you can start the engine by pressing the Engine Start/ Stop button for 10 seconds in the ACC position. CAUTION Sunroof Open (if equipped) OQX042015N This warning is displayed if you turn off the engine when the sunroof is open. Close the sunroof securely before leaving your vehicle. 4-18 04 Icy Road Warning Light (if equipped) OQX042046N This warning light is to warn the driver that the road may be icy. When the temperature on the outside temperature gauge is approximately below 40°F (4°C), the Icy Road Warning Light and Outside Temperature Gauge blinks 10 times, and then illuminates. Also, the warning chime sounds 3 times. Low Pressure OQX042018N This warning message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated. For more information, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 7. Information If the icy road warning light appears while driving, you should drive more attentively and safely and refrain from speeding, rapid acceleration, sudden braking or sharp turning, etc. 4-19 Instrument Cluster Lights Mode Low Fuel This warning message is displayed if the fuel tank is almost out of fuel. When this message is displayed, the low fuel level warning light in the cluster will come on. It is recommended to look for the nearest fueling station and refuel as soon as possible. Add fuel as soon as possible. OSU2I049029 This indicator displays which exterior light is selected using the lighting control. Wiper Engine Overheated This warning message is displayed when the engine coolant temperature is above 248°F (120°C). This means that the engine is overheated and may be damaged. If your vehicle has overheated, refer to “If the Engine Overheats” in chapter 7. Check Headlight (if equipped) This warning message is displayed if the headlights are not operating properly. A headlights bulb may need to be replaced. Information OSU2I049031 This indicator displays which wiper speed is selected using the wiper control. 4-20 Make sure to replace the burned out bulb with a new one of the same wattage rating. 04 CLUSTER DISPLAY Cluster Display Control OQX069070 The cluster display modes can be changed by using the control buttons. Switch Function MODE button for changing modes , OK MOVE switch for changing items SELECT/RESET button for setting or resetting the selected item 4-21 Instrument Cluster Cluster Display Modes Modes Symbol Explanation Trip Computer This mode displays driving information such as the tripmeter, fuel economy, etc. For more information, refer to "Trip Computer" in this chapter. Drive Assist (if equipped) This mode displays the state of: - Lane Keeping Assist - Driver Attention Warning - Tire pressure For more information, refer to "Lane Keeping Assist (LKA)”, “Driver Attention Warning (DAW)” in chapter 6 and "Tire Pressure Monitoring System (TPMS)" in chapter 7. User Settings The User Settings menu provides user options for a variety of settings including door lock/unlock features, convenience features, driver assistance settings, etc. Master Warning The Warning mode displays warning messages related to the vehicle when one or more systems is not operating normally. The information provided may differ depending on which functions are applicable to your vehicle. 4-22 04 Quick Guide Help Drive Assist Mode This mode provides quick guides for the systems in the User Settings mode. Select an item, press and hold the OK button. For more information about each system, refer to this Owner's Manual. Trip Computer Mode OQX042017N LKA This mode displays the state of Lane Keeping Assist. For more details, refer to each system information in chapter 7. OQX042057N The trip computer mode displays information related to vehicle driving parameters including fuel economy, trip meter information and vehicle speed. For more information, refer to "Trip Computer" in this chapter. OQX042018N Tire Pressure This mode displays information related to Tire Pressure. For more information, refer to "Tire Pressure Monitoring System (TPMS)" in chapter 7. 4-23 Instrument Cluster Master Warning Mode User Settings Mode OIG059097L ONX4E040026 This warning light informs the driver the following situations. • Forward Collision-Avoidance Assist malfunction (if equipped) • Forward Collision-Avoidance Assist radar blocked (if equipped) • Blind-Spot Collision Warning malfunction (if equipped) • Blind-Spot Collision Warning radar blocked (if equipped) • Lamp malfunction (if equipped) • High Beam Assist malfunction (if equipped) • Tire Pressure Monitoring System (TPMS) malfunction (if equipped) The Master Warning Light illuminates if one or more of the above warning situations occur. At this time, a Master Warning icon ( ) will appear beside the User Settings icon ( ), on the cluster display. If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear. In this mode, you can change the settings of the instrument cluster, doors, lamps, etc. 1. Driver Assistance 2. Cluster 3. Lights 4. Door 5. Convenience 6. Units 7. Language 8. Reset The information provided may differ depending on which functions are applicable to your vehicle. 4-24 04 1. Driver Assistance Items Explanation Warning Volume To adjust the warning volume of the driver assistance system • Driving Safety Priority/ Parking Safety Priority / High / Medium / Low Driver Attention Warning To activate or deactivate the Leading vehicle departure alert. • Leading vehicle departure alert • Inattentive Driving Warning For more details, refer to “Driver Attention Warning (DAW)” in chapter 7. Driving Safety • Forward Safety To activate or deactivate the Forward Safety. • Forward Safety Warning Timing To adjust the Forward Safety warning timing of the driver assistance system. For more details, refer to "Forward Collision-Avoidance Assist (FCA)" in chapter 7 • Lane Safety To activate or deactivate the Lane Safety. For more details, refer to "Lane Keeping Assist (LKA)" in chapter 7 • Blind-Spot Safety To activate or deactivate the Blind-Spot Safety. For more details, refer to “Blind-Spot Collision Warning (BCW)” in chapter 7 Parking Safety • Rear Cross-Traffic Safety To activate or deactivate Rear Cross-Traffic Safety. For more details, refer to "Rear Cross-Traffic Collision-Avoidance Assist (RCCA)" in chapter 7. à The information provided may differ depending on which functions are applicable to your vehicle. 4-25 Instrument Cluster 2. Cluster Items Theme Selection Explanation You can select the theme of the cluster. • Theme A / Theme B / Theme C To activate or deactivate the Wiper/ Light mode. Wiper/Lights When activated, the cluster display shows the selected Wiper/Light mode Display whenever you changed the mode. Traffic Signs Icy Road Warning To set the traffic signs displayed. To activate or deactivate the icy road warning. Cluster Voice Guidance To adjust the cluster voice guidance volume. Volume Welcome Sound To activate or deactivate the welcome sound. à The information provided may differ depending on which functions are applicable to your vehicle. 4-26 04 3. Lights Items Illumination One Touch Turn Signal Headlight Delay High Beam Assist Explanation To adjust the illumination level. • Level 1~20 • Off : The one touch turn signal function will be deactivated. • 3, 5, 7 Flashes : The turn signal indicator will blink 3, 5, or 7 times when the turn signal lever is moved slightly. For more details, refer to “Lighting” in chapter 5. To activate or deactivate the Headlight delay function. For more details, refer to "Lighting" in chapter 5. To activate or deactivate High Beam Assist. For more details, refer to "High Beam Assist (HBA)" in chapter 5. à The information provided may differ depending on which functions are applicable to your vehicle. 4-27 Instrument Cluster 4. Door Items Explanation • Enable on Shift : All doors will be automatically locked if the shift button is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position. (only when the engine is running.) Automatically • Enable on Speed : All doors will be automatically locked when the Lock vehicle speed exceeds 9 mph (15 km/h). • Off : The auto door lock operation will be deactivated. • On Shift to P: All doors will be automatically unlocked if the shift button is shifted to the P (Park) position. (only when the engine is running.) Automatically • On key out/On vehicle off : All doors will be automatically unlocked when the ignition key is removed from the ignition switch or the Engine Unlock Start/Stop button is set to the OFF position. • Off : The auto door unlock operation will be canceled. Two Press Unlock • Off: The two press unlock function will be deactivated. Therefore, all doors will unlock if the door unlock button is pressed. • On: Only the driver’s door will unlock if the door unlock button is pressed. When the door unlock button is pressed again within 4 seconds, the remaining doors will unlock. Horn Feedback To activate or deactivate the horn feedback. If the horn feedback is activated, after locking the door by pressing the lock button on the remote key, and pressing it again within 4 seconds, the horn feedback sound will operate once to indicate that all doors are locked (if equipped with remote key). Remote Window To activate or deactivate the Remote Window Control à The information provided may differ depending on which functions are applicable to your vehicle. 4-28 04 5. Convenience Items Rear Occupant Alert Explanation To activate or deactivate the Rear Occupant Alert. For more details, refer to "Rear Occupant Alert (ROA) system" in chapter 5. • Service Interval To activate or deactivate the service interval function. Service Interval • Adjust Interval If the service interval menu is activated, you may adjust the time and distance. • Reset To reset the service interval. Welcome Mirror/Light Wireless Charging System Auto Rear Wiper (in R) • On door unlock : The side view mirrors are unfolded and the welcome light turns on automatically when the doors are unlocked. • On driver approach : The side view mirrors are unfolded and the welcome light turns on automatically when the vehicle is approached with the smart key. For more details, refer to ''Welcome System'' in chapter 5." To activate or deactivate the wireless charging system in the front seat. For more details, refer to "Wireless cellular phone charging system" in chapter 5. To activate or deactivate the Auto Rear Wiper function. If you move the shift button from D to R when the front wiper operates, the rear wiper will operate automatically. Then, if you move the shift button from R to D, the rear wiper will stop." à The information provided may differ depending on which functions are applicable to your vehicle. 4-29 Instrument Cluster 6. Units Items Speed Unit Explanation To select the speed unit. (km/h, MPH) Temperature To select the temperature unit. (°C,°F) Unit Fuel Economy Unit To select the fuel economy unit. (km/L, L/100km, MPG) Tire Pressure To select the tire pressure unit. (psi, kPa, bar) Unit à The information provided may differ depending on which functions are applicable to your vehicle. 7. Language Items Language Explanation Choose the language. You can choose the language in infotainment system. (if equipped) à The information provided may differ depending on which functions are applicable to your vehicle. 8. Reset Items Reset Explanation You can reset the menus in the User Settings Mode. All menus in the User Settings Mode are reset to factory settings, except language and service interval. à The information provided may differ depending on which functions are applicable to your vehicle. 4-30 04 TRIP COMPUTER The trip computer is a microcomputercontrolled driver information system that displays information related to driving. Information Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected. Trip Modes OQX069060L Fuel Economy • Trip distance • Total driving time • Average fuel economy Accumulated Info • Trip distance • Total driving time • Average fuel economy Drive Info • Trip distance • Total driving time • Average fuel economy Digital Speedometer To change the trip mode, toggle the “ ” switch on the steering wheel. , • Manual reset To clear the average fuel economy manually, press the OK button on the steering wheel for more than 1 second when the average fuel economy is displayed. • Automatic reset To automatically reset the average fuel economy after refueling, select the "Fuel Econ. Reset" mode in the User Settings menu on the cluster display. - After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically. - After Refueling: The average fuel economy will reset automatically after adding 1.6 gallons (6 liters) of fuel or more and after driving speed exceeds 1 mph (1 km/h). 4-31 Instrument Cluster OQX042058N OQX042060N Drive Info Accumulated Info Trip distance (1), total driving time (2) and average fuel economy (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Drive Info’ is displayed. Accumulated trip distance (1), total driving time (2) and average fuel economy (3) are displayed. The information is accumulated starting from the last reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Accumulated Info’ is displayed. B0802EU04 OQX042059N Since Refueling Trip distance (1), total driving time (2) and average fuel economy (3) after the vehicle has been refueled are displayed. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Since Refueling’ is displayed. 4-32 Auto Stop (if equipped) AUTO STOP display shows the elapsed time of engine stop by Idle Stop and Go system. For more details, refer to “Idle Stop and Go (ISG)” section in chapter 6. 5. Convenience Features Accessing Your Vehicle...................................................................................... 5-4 Remote Key....................................................................................................................5-4 Smart Key....................................................................................................................... 5-7 Immobilizer System..................................................................................................... 5-11 Door Locks......................................................................................................... 5-12 Operating Door Locks from Outside the Vehicle.......................................................5-12 Operating Door Locks from Inside the Vehicle..........................................................5-13 Automatic Door Lock and Unlock Features................................................................5-15 Child-Protector Rear Door Locks................................................................................5-15 Theft-Alarm System..........................................................................................5-16 Rear Occupant Alert (ROA) .............................................................................. 5-17 Rear Occupant Alert Operation...................................................................................5-17 Steering Wheel..................................................................................................5-18 Motor Driven Power Steering (MDPS)....................................................................... 5-18 Tilt Steering / Telescope Steering.............................................................................. 5-19 Horn.............................................................................................................................5-20 Mirrors.............................................................................................................. 5-20 Inside Rearview Mirror................................................................................................5-20 Side View Mirrors.........................................................................................................5-21 Windows........................................................................................................... 5-23 Power Windows...........................................................................................................5-24 Sunroof..............................................................................................................5-27 Sunshade.....................................................................................................................5-28 Tilt Open/close............................................................................................................5-28 Sunroof Opening and Closing....................................................................................5-29 Automatic Reversal.....................................................................................................5-29 Resetting the Sunroof.................................................................................................5-30 Sunroof Open Warning................................................................................................5-31 5 Hood................................................................................................................. 5-32 Opening the Hood....................................................................................................... 5-32 Closing the Hood.........................................................................................................5-33 Liftgate............................................................................................................. 5-34 Opening the Liftgate...................................................................................................5-34 Closing the Liftgate.....................................................................................................5-34 Emergency Liftgate Safety Release...........................................................................5-35 Fuel Filler Door................................................................................................. 5-36 Opening the Fuel Filler Door......................................................................................5-36 Closing the Fuel Filler Door........................................................................................5-36 Lighting............................................................................................................. 5-38 Exterior Lights.............................................................................................................5-38 Interior Lights............................................................................................................. 5-44 Wipers and Washers........................................................................................ 5-47 Windshield Wipers......................................................................................................5-47 Windshield Washers................................................................................................... 5-48 Rear Window Wiper and Washer.............................................................................. 5-49 5 Manual Climate Control System..................................................................... 5-50 Heating and Air Conditioning..................................................................................... 5-51 System Operation........................................................................................................5-54 System Maintenance..................................................................................................5-56 Automatic Climate Control System................................................................ 5-58 Automatic Temperature Control Mode......................................................................5-59 Manual Temperature Control Mode.......................................................................... 5-60 System Operation....................................................................................................... 5-64 System Maintenance..................................................................................................5-65 Windshield Defrosting and Defogging........................................................... 5-67 Rear Window Defroster............................................................................................. 5-69 5. Convenience Features Storage Compartment..................................................................................... 5-70 Center Console Storage..............................................................................................5-70 Sliding Armrest............................................................................................................5-70 Glove Box......................................................................................................................5-71 Interior Features................................................................................................ 5-71 Cup Holder....................................................................................................................5-71 Sunvisor....................................................................................................................... 5-72 Power Outlet................................................................................................................ 5-72 USB Charger................................................................................................................ 5-73 Wireless Cellular Phone Charging System ................................................................ 5-74 Clock............................................................................................................................ 5-76 Clothes Hanger............................................................................................................ 5-76 Floor Mat Anchor(s)..................................................................................................... 5-77 Luggage Net Holder.................................................................................................... 5-77 Cargo Area Cover........................................................................................................ 5-78 Exterior Features...............................................................................................5-79 Roof Side Rails............................................................................................................. 5-79 Infotainment System.......................................................................................5-80 USB and IPod® Port.................................................................................................... 5-80 Antenna....................................................................................................................... 5-80 Steering Wheel Audio Control.................................................................................... 5-81 Bluetooth® Wireless Technology Hands-Free...........................................................5-82 Audio (Display Audio) / Video / Navigation System .................................................5-82 5 Convenience Features ACCESSING YOUR VEHICLE Remote Key (if equipped) WARNING Do not leave the keys in your vehicle with unsupervised children. Unattended children could place the key in the ignition switch and may operate power windows or other controls, or even make the vehicle move, which could result in serious injury or death. Unlocking Your Vehicle OQX059138 Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate. (1) Door Lock (2) Door Unlock (3) Panic Locking Your Vehicle To lock your vehicle: 1. Make sure all doors, the engine hood and the liftgate are closed. 2. Press the Door Lock button (1) on the remote key to lock all doors. 3. If the Door Lock button (1) is pressed once more within four seconds, the horn will beep once and the hazard warning lights will blink. 4. Make sure the doors are locked by checking the position of the door lock button inside the vehicle. Information After locking the doors, if you press the Door Lock button again within four seconds, the hazard warning lights will blink and the horn will sound one time to confirm that the doors are locked. To unlock your vehicle: 1. Press the Door Unlock button (2) on the remote key. 2. The driver’s door will unlock. The hazard warning lights will blink two times. Two press unlock setting: If you press the Door Unlock button on the remote key again within four seconds, then all the doors will unlock. Two press unlock setting can be changed according to owner’s preference in the cluster User Settings mode or with the remote key. • User settings mode method: Select or deselect the ‘Two Press Unlock’ feature in the User Settings mode on the cluster display (User Settings → Door → Two Press Unlock). Information The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide. Information After unlocking the doors, the doors will automatically relock after 30 seconds unless a door is opened. 5-4 05 Panic Button (3) Press and hold the Panic button (3) for more than one second. The horn sounds and hazard warning lights flash for about 30 seconds. To cancel the panic mode, press any button on the remote key. Start-up For information, refer to the “Key Ignition Switch” section in chapter 6. NOTICE To prevent damaging the remote key: • Keep the remote key away from water or any liquid and fire. Internal circuits may malfunction if the inside of the remote key gets damp (from liquids or moisture) or if it is heated. This can exclude the remote key from being covered under warranty. • Avoid dropping or throwing the remote key. • Protect the remote key from extreme temperatures. Mechanical Key To unfold the mechanical key, press the release button on the remote. To return the key to its stored position, press the release button and fold the key back into the remote. Remote Key Precautions The remote key will not work if any of the following occur: • The key is in the ignition switch. • You exceed the operating distance limit (about 90 feet [30 m]). • The remote key battery is weak. • Other vehicles or objects may be blocking the signal. • The weather is extremely cold. • The remote key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the remote key. If the remote key does not work correctly, open and close the door with the mechanical key. If you have a problem with the remote key contact an authorized HYUNDAI dealer. If the remote key is in close proximity to your mobile phone, the signal could be blocked by your mobile phone’s normal operational signals. This is specifically relevant when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails. When possible, avoid placing the remote key and your mobile phone in the same location such as a pants or jacket pocket in order to avoid interference between the two devices. OQX059139 If the remote key does not operate normally, you can lock or unlock the driver’s door by using the mechanical key. 5-5 Convenience Features Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. NOTICE Keep the remote key away from electromagnetic materials that block electromagnetic waves to the key surface. Battery Replacement OPD046002 If the remote key is not working properly, try replacing the battery with a new one. Battery Type: CR2032 To replace the battery: 1. Insert a slim tool into the slot and gently pry open the cover. 2. Using a screw driver, remove the battery cover. 3. Remove the old battery and insert the new battery. Make sure the battery position is correct. 4. Reinstall the battery cover and key cover in the reverse order of removal. If you suspect your remote key might have sustained some damage, or you feel your remote key is not working correctly contact an authorized HYUNDAI dealer. WARNING This product contains a button battery. If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention. Information 5-6 An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulation. 05 Smart Key (if equipped) Information The door handle button will only operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle. OQX059036L Your HYUNDAI uses a Smart Key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate. 1. Door Lock 2. Door Unlock 3. Remote start 4. Panic Locking Your Vehicle Note that you cannot lock your vehicle using the door handle button if any of the following occur: • The Smart Key is in the vehicle. • The Engine Start/Stop button is in ACC or ON position. • Any of the doors are open except for the liftgate. WARNING Do not leave the Smart Key in your vehicle with unsupervised children. Unattended children could press the Engine Start/Stop button and may operate power windows or other controls, or even make the vehicle move, which could result in serious injury or death. Unlocking Your Vehicle OQX059038L To lock your vehicle using the door handle button or the Smart Key: 1. Close all doors, hood and liftgate. 2. Either press the door handle button or press the Door Lock button (1) on the smart key. 3. The hazard warning lights will blink and the chime will sound once. 4. When the doors are locked, the indicator light on the central door lock/unlock switch will be illuminated. OQX059038L To unlock your vehicle: 1. Make sure you have the smart key in your possession. 2. Press either the button on the door handle or the Door Unock button (2) on the smart key. The driver’s door will unlock and the hazard warning lights will blink two times. 5-7 Convenience Features 3. Two Press Unlock Feature The priority for unlocking the driver door only, or unlocking all the doors with one press may be adjusted in the User Settings menu in the cluster display. The Two Press Unlock feature, when enabled, will require the user to press the door unlock button once for driver door only and twice for unlocking all the doors. Select or Deselect the Two Press Unlock Feature in the User Settings menu in the cluster display. The option can be found under the following menu: USER SETTINGS → DOOR → TWO PRESS UNLOCK Information • The door handle buttons will only operate when the smart key is within 28-40 inches (0.7~1m) from the outside door handle • Either the driver or front passenger door can be opened with the door handle button when the smart key is within this range • If you press the front passenger outside door handle with the smart key in your possession, all the doors will unlock • The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide. 5-8 Remote Start (if equipped) You can start the engine and turn on the climate system by pressing the remote start button (3) outside the vehicle. To start and stop engine remotely: 1. Press the door lock button (1), and then the hazard warning lights blink once to alert you. 2. Press the Remote Start button (3) for more than 2 seconds to start the engine within 4 seconds after pressing the door lock button (1). 3. While remote starting, the hazard warning lights blink three times. If you want to stop the engine, press the Remote Start button (3) again. The climate system will be continuously maintained, as selected when the engine is restarted. If the climate system is turned off before you have stopped the engine, the climate system does not operate when you start the engine remotely. If someone without a designated smart key drives your vehicle while remote starting, the engine is automatically stopped for security purposes. Information After remotely starting the engine, the engine will turn off automatically after 10 minutes if you do not drive your vehicle. 05 CAUTION Mechanical Key • The remote start will not work if you exceed the operating distance limit (about 10 m). • Avoid idling the engine for prolonged periods to follow the emission regulations in your country. • Laws in your country may restrict the use of remote start. You should check country regulations before using this remote starting system. • It is only possible to start the engine remotely when shifted to P (Park). • If the hood or the liftgate is opened, you cannot start the engine remotely. If the Smart Key does not operate normally, you can lock or unlock the driver’s door by using the mechanical key. Panic Button To remove the mechanical key from the smart key FOB, slide the release lever in the direction of the arrow (1) and then pull the mechanical key (2) outward. To unlock the vehicle using the mechanical key. insert the mechanical key into the key hole in the driver door. To reinstall the mechanical key into the FOB, insert the key in the top of the key FOB and push inward until a click sound is heard. Press and hold the Panic button (4) for more than one second. The horn sounds and hazard warning lights blink for about 30 seconds. To cancel the panic mode, press any button on the Smart Key. Start-up You can start the vehicle without inserting the key. For information, refer to the “Engine Start/Stop Button” section in chapter 6. NOTICE To prevent damaging the smart key: • Keep the smart key in a cool, dry place to avoid damage or malfunction. Exposure to moisture or high temperature may cause the internal circuit of the smart key to malfunction which may not be covered under warranty. • Avoid dropping or throwing the smart key. • Protect the smart key from extreme temperatures. OPD046045 Loss of a Smart Key A maximum of two Smart Keys can be registered to a single vehicle. If you happen to lose your smart key, you should immediately take the vehicle and remaining keys to your authorized HYUNDAI dealer or tow the vehicle, if necessary. 5-9 Convenience Features Smart Key Precautions The smart key may not work if any of the following occur: • The smart key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter. • The smart key is near a mobile two way radio system or a cellular phone. • Another vehicle’s smart key is being operated close to your vehicle. If the smart key does not work correctly, open and close the door with the mechanical key. If you have a problem with the smart key, contact an authorized HYUNDAI dealer. If the smart key is in close proximity to your mobile phone, the signal could be blocked by your mobile phone’s normal operational signals. This is specifically relevant when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails. When possible, avoid keeping the smart key and your mobile phone in the same location such as a pants or jacket pocket in order to avoid interference between the two devices. NOTICE Keep the smart key away from electromagnetic materials that blocks electromagnetic waves to the key surface. NOTICE Always have the smart key with you when leaving the vehicle. If the smart key is left near the vehicle, the vehicle battery may be discharged. 5-10 Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. Battery Replacement OQX059142N If the Smart Key is not working properly, try replacing the battery with a new one. Battery Type: CR2032 To replace the battery: 1. Remove the mechanical key. 2. Use a slim tool to pry open the rear cover of the smart key. 3. Remove the old battery and insert the new battery. Make sure the battery position is correct. 4. Reinstall the rear cover of the smart key. If you suspect your smart key might have sustained some damage, or you feel your smart key is not working correctly, contact an authorized HYUNDAI dealer. 05 WARNING This product contains a button battery. If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention. Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulation. Immobilizer System (if equipped) The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled. When the ignition switch is placed in the ON position, the immobilizer system indicator should come on briefly, then go off. If the indicator starts to blink, the system does not recognize the coding of the key. Turn the ignition switch to the LOCK/OFF position, then turn the ignition switch to the ON position again. In some circumstances, the vehicle may not recognize your smart key if another smart key device is nearby or a metal object such as a key chain is causing interference with the smart key. If this occurs, your vehicle may not start. Remove any metal objects or additional keys near the smart key before attempting to start the vehicle again. If the system repeatedly does not recognize the coding of the key, it is recommended that you contact your HYUNDAI dealer. Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable. WARNING In order to prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle. Your immobilizer password is a customer unique password and should be kept confidential. NOTICE The transponder in your key is an important part of the immobilizer system. It is designed to give years of trouble-free service, however you should avoid exposure to moisture, static electricity and rough handling. Immobilizer system malfunction could occur. Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. 5-11 Convenience Features DOOR LOCKS Operating Door Locks from Outside the Vehicle Mechanical Key Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely. Smart Key OQX059037N If you lock the driver’s door with a mechanical key, all vehicle doors will lock. If you unlock the driver’s door with a mechanical key, you can open and close the driver’s door only. Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely. OQX059038L Remote Key OQX059036N [A]: Door Lock, [B]: Door Unlock OQX059138N To lock the doors, press the Door Lock button (1) on the remote key. Press the Door Unlock button (2) on the remote key, the driver’s door will unlock. If you press the Door Unlock button on the remote key again within four seconds, then all the doors will unlock. 5-12 Press the button on the driver’s outside door handle while carrying the Smart Key with you or press the Door Unlock button on the Smart Key, the driver’s door will unlock. If you press the button on the front passenger’s outside door, all doors will unlock. Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely. 05 Information • In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions. • If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components. • Two press unlock setting can be changed in the User Settings mode on the cluster. Operating Door Locks from Inside the Vehicle With the Door Lock Button OQXI049006 • If the inner door handle of either the driver door or passenger door is pulled when the door lock button is in the lock position, the button is unlocked and the door will open. • For Key Start Vehicles (w/Remote Key) The front doors cannot be locked if the remote key is in the ignition switch and either of the front doors are open. • For Push Button Start Vehicles (Smart Key) The doors cannot be locked if the smart key fob is inside the vehicle and any of the doors are open. Information If a power door lock ever fails to function while you are in the vehicle try one or more of the following techniques to exit: • Operate the door unlock feature repeatedly (both electronic and manual) while simultaneously pulling on the door handle. • Operate the other door locks and handles, front and rear. • Lower a front window and use the mechanical key to unlock the door from outside. • To unlock a door, push the door lock button (1) to the “Unlock” position. • To lock a door, push the door lock button (1) to the “Lock” position. • To open a door, pull the door handle (2) outward. 5-13 Convenience Features With the Central Door Lock Switch WARNING Do not leave children or animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or serious injury to unattended children or animals who cannot escape the vehicle. Children might operate features of the vehicle that could injure them, or they could encounter other harm, possibly from someone gaining entry to the vehicle. OQX059035N The driver side door armrest is equipped with a central door lock switch. The lock button is indicated by a ( ) symbol. The unlock button is indicated by a ( ) symbol. When the lock button (2) is pressed, all the vehicle doors will lock. When the unlock button (1) is pressed, all the vehicle doors will unlock. • For Key Start Vehicles (with remote key) If the key is in the ignition switch and any door is opened, the doors will not lock even though the lock button (2) is pressed. • For Push Button Start Vehicles (Smart Key) If the smart key is in the vehicle and any door is open, the doors will not lock even though the lock button (2) is pressed. WARNING • The doors should always be fully closed and locked while the vehicle is in motion. If the doors are unlocked, the risk of being thrown from the vehicle in a crash is increased. • Do not pull the inner door handle of the driver’s or passenger’s door while the vehicle is moving. 5-14 WARNING Always secure your vehicle. Leaving your vehicle unlocked increases the potential risk to you or others from someone hiding in your vehicle. To secure your vehicle, while depressing the brake, move the shift lever to the P (Park) position, engage the parking brake, and place the ignition switch in the LOCK/OFF position, close all windows, lock all doors, and always take the key with you. CAUTION Opening a door when something is approaching may cause damage or injury. Be careful when opening doors and watch for vehicles, motorcycles, bicycles or pedestrians approaching the vehicle in the path of the door. WARNING If you stay in the vehicle for a long time while the weather is very hot or cold, there are risks of injuries or danger to life. Do not lock the vehicle from the outside when someone is in the vehicle. 05 Automatic Door Lock and Unlock Features Child-Protector Rear Door Locks Your vehicle is equipped with features that will automatically lock or unlock your vehicle based on settings you select in the cluster display. Auto LOCK - Enable on Speed When this feature is set in the cluster display, all the doors will be locked automatically when the vehicle exceeds 9 mph (15 kph). Auto LOCK - Enable on Shift When this feature is set in the cluster display, all the doors will be locked automatically when the vehicle is shifted out of P (PARK) while the engine is running. Auto UNLOCK - Enable on Shift When this feature is set in the cluster display, all the doors will be unlocked automatically when the vehicle is shifted back into P (PARK). For more information on these features, refer to the Cluster Display section later in this chapter. Additional Unlock Safety Feature Air Bag Deployment As an additional safety feature, all doors will be automatically unlocked when an impact causes the air bags to deploy. Information The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide. OQXI049008 The child safety lock is provided to help prevent children seated in the rear from accidentally opening the rear doors. The rear door safety locks should be used whenever children are in the vehicle. The child safety lock is located on the edge of each rear door. When the child safety lock is in the lock position, the rear door will not open if the inner door handle is pulled. To lock the child safety lock, insert a small flat blade tool (like a screwdriver or similar) (1) into the slot and turn it to the lock position as shown. To allow a rear door to be opened from inside the vehicle, unlock the child safety lock. WARNING If children accidently open the rear doors while the vehicle is in motion, they could fall out of the vehicle. The rear door safety locks should always be used whenever children are in the vehicle. 5-15 Convenience Features THEFT-ALARM SYSTEM This system helps to protect your vehicle and valuables. The horn will sound and the hazard warning lights will blink continuously if any of the following occur: • A door is opened without using the remote key or smart key. • The liftgate is opened without using the remote key or smart key. • The engine hood is opened. The alarm continues for 30 seconds, then the system resets. To turn off the alarm, unlock the doors with the remote key or smart key. The Theft Alarm System automatically sets 30 seconds after you lock the doors and the liftgate. For the system to activate, you must lock the doors and the liftgate from outside the vehicle with the remote key or smart key or by pressing the button on the outside of the door handle with the smart key in your possession. The hazard warning lights will blink and the chime will sound once to indicate the system is armed. Once the security system is set, opening any door, the liftgate, or the hood without using the remote key or smart key will cause the alarm to activate. The Theft Alarm System will not set if the hood, the liftgate, or any door is not fully closed. If the system will not set, check the hood, the liftgate, or the doors are fully closed. Do not attempt to alter this system or add other devices to it. 5-16 Information • Do not lock the doors until all passengers have left the vehicle. If the remaining passenger leaves the vehicle when the system is armed, the alarm will be activated. • If the vehicle is not disarmed with the remote key or smart key, open the doors by using the mechanical key and place the ignition switch in the ON position (for remote key) or start the engine (for smart key) by directly pressing the ignition switch with the smart key. • If the system is disarmed by unlocking the vehicle, but neither a door or the liftgate is opened within 30 seconds, the doors will relock and the system will rearm automatically. 05 REAR OCCUPANT ALERT (ROA) (IF EQUIPPED) Rear Occupant Alert helps prevent the driver from leaving a passenger in the rear seats. Rear Occupant Alert Operation WARNING Rear Occupant Alert provides information to the driver to check the rear seats but it does not detect whether there is an object or passenger. Always check the rear seats when leaving the vehicle. Information OCN7050135L When the driver turns off the engine and opens the driver’s door after opening and closing a rear door, a warning message “Check rear seats” appears on the cluster. The open and close history of the rear door is initialized if the driver turns off the engine and lock vehicle doors. However, the alarm may sound again whenever the driver’s door is opened if the previous history of the rear door is not initialized. 5-17 Convenience Features STEERING WHEEL Motor Driven Power Steering (MDPS) The system assists you with steering the vehicle. If the vehicle is turned off or if the power steering system becomes inoperative, you may still steer the vehicle, but it will require increased steering effort. Also, the steering effort becomes heavier as the vehicle’s speed increases and becomes lighter as the vehicle’s speed decreases for better control of the steering wheel. Should you notice any change in the effort required to steer during normal vehicle operation, have the system checked by an authorized HYUNDAI dealer. CAUTION • If the Motor Driven Power Steering System does not operate normally, the warning light ( ) will illuminate on the instrument cluster. You may steer the vehicle, but it will require increased steering efforts. Take your vehicle to an authorized HYUNDAI dealer and have the system checked as soon as possible. • When an abnormality is detected in the Motor Driven Power Steering system, to prevent a an accident, the steering assist function may become inoperative. At this time, the warning light turns on or blinks on the cluster. The steering wheel may become difficult to control or operate. Have your vehicle checked immediately, after moving the vehicle to a safe area. 5-18 Information The following symptoms may occur during normal vehicle operation: • The steering effort may be high immediately after placing the ignition switch in the ON position. This happens as the system performs the MDPS system diagnostics. When the diagnostics are completed, the steering wheel effort will return to its normal condition. • When the battery voltage is low, you might have to put more steering effort. However, it is a temporary condition so that it will return to normal condition after charging the battery. • A click noise may be heard from the MDPS relay after the ignition switch is in the ON or LOCK/OFF position. • Motor noise may be heard when the vehicle is at a stop or at a low driving speed. • When you operate the steering wheel in low temperatures, abnormal noise may occur. If the temperature rises, the noise will disappear. This is a normal condition. • When an error is detected from the MDPS, the steering effort assist function may become inoperative in order to prevent fatal accidents. Instrument cluster warning lights may be on or the steering effort may be high. If these symptoms occur, drive the vehicle to a safe area as soon as it is safe to do so. Have the system checked by an authorized HYUNDAI dealer as soon as possible. 05 Tilt Steering / Telescope Steering When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face. Make sure you can see the instrument cluster warning lights and gauges. After locking the lever, push the steering wheel both up and down to be certain it is locked in position. Always adjust the position of the steering wheel before driving. WARNING NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident. Information Sometimes the lock release lever may not engage completely. This may occur when the gears of the locking mechanism do not completely mesh. If this occurs, pull down on the lockrelease lever, readjust the steering wheel again, and then pull back up on the release lever to lock the steering wheel in place. CAUTION While adjusting the steering wheel height, please do not push or pull it hard since the fixture can be damaged. OQX069059L To adjust the steering wheel angle and height: 1. Pull down the lock-release lever (1). 2. Adjust the steering wheel to the desired angle (2) and distance forward/back (3). 3. Pull up the lock-release lever to lock the steering wheel in place. 5-19 Convenience Features MIRRORS Horn Inside Rearview Mirror Before driving your vehicle, check to see that your inside rearview mirror is properly positioned. Adjust the rearview mirror so that the view through the rear window is properly centered. WARNING OQXI049023 To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed. NOTICE Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object. Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear head restraints which could interfere with your vision through the rear window. WARNING To prevent serious injury during an accident or deployment of the air bag, do not modify the rearview mirror and do not install a wide mirror. WARNING NEVER adjust the mirror while driving. This may cause loss of vehicle control resulting in an accident. NOTICE When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as this may cause the liquid cleaner to enter the mirror housing. 5-20 05 Day/night Rearview Mirror The right side view mirror is convex. Objects seen in the mirror are closer than they appear. Use the inside rear view mirror or look back directly to determine the actual distance of other vehicles prior to changing lanes. WARNING OQXI049024 [A] : Day/night lever, [B] : Day Make this adjustment before you start driving and while the day/night lever is in the day position. Pull the day/night lever towards you to reduce glare from the headlamps of the vehicles behind you during night driving. Remember that you lose some rearview clarity in the night position. Side View Mirrors Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle control resulting in an accident. NOTICE • Do not scrape ice off the mirror face; this may damage the surface of the glass. • If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved spray de-icer (not radiator antifreeze) spray, or a sponge or soft cloth with very warm water, or move the vehicle to a warm place and allow the ice to melt. OQX059147N Make sure to adjust the side view mirrors to your desired position before you begin driving. Your vehicle is equipped with both left-hand and right-hand side view mirrors. The mirrors can be adjusted remotely with the remote switch. The side view mirrors can be folded to help prevent damage when going through an automatic car wash or when passing through a narrow street. 5-21 Convenience Features Side View Mirror Adjustment OQX059016N Adjusting the side view mirrors: 1. Press either the L (driver’s side) or R (passenger’s side) button (1) to select the side view mirror you would like to adjust. 2. Use the mirror adjustment control switch to position the selected mirror up, down, left or right. 3. After adjustment, put the button into neutral (center) position to prevent inadvertent adjustment. NOTICE • The mirrors stop moving when they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, because this can damage the motor. • Do not attempt to adjust the side view mirrors by hand, because this can damage the motor. 5-22 Folding the side View Mirrors OQXI049026 To fold the side view mirrors, grasp the housing of the mirror and then fold it inwards. 05 WINDOWS OQX059013N (1) Driver’s door power window switch (2) Front passenger’s door power window switch (3) Rear door (left) power window switch (4) Rear door (right) power window switch (5) Window opening and closing (6) Automatic power window (7) Power window lock switch 5-23 Convenience Features Power Windows The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control that door’s window. The driver has a Power Window Lock switch which can block the operation of passenger windows. The power windows will operate for approximately 30 seconds after the ignition switch is placed in the ACC or LOCK/OFF position. However, if the front doors are opened, the Power Windows will not operate even within the 30 second period. WARNING To avoid serious injury or death, do not extend your head, arms or body outside the windows while driving. Information • In cold and wet climates, power windows may not work properly due to freezing conditions. • While driving with the rear windows down or with the sunroof (if equipped) opened (or partially opened), your vehicle may demonstrate a wind buffeting or pulsation noise. This noise is normal and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch. If you experience the noise with the sunroof open, slightly close the sunroof. 5-24 Window Opening and Closing OQX059133L To open: Press the window switch down to the first detent position (5). Release the switch when you want the window to stop. To close: Pull the window switch up to the first detent position (5). Release the window switch when you want the window to stop. Auto Down Window (if equipped) Pressing the power window switch down momentarily to the second detent position (6) completely lowers the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch. Auto Up/down Window (if equipped) Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch. 05 To Reset the Power Windows If the power windows do not operate normally, the automatic power window system must be reset as follows: 1. Place the ignition switch to the ON position. 2. Close the window and continue pulling up on the power window switch for at least one second. If the power windows do not operate properly after resetting, have the system checked by an authorized HYUNDAI dealer. WARNING The automatic reverse feature doesn’t activate while resetting the power window system. Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage. Automatic Reverse (if equipped) OLF044032 If a window senses any obstacle while it is closing automatically, it will stop and lower approximately 12 inches (30 cm) to allow the object to be cleared. If the window detects the resistance while the power window switch is pulled up continuously, the window will stop upward movement then lower approximately 1 inch (2.5 cm). If the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reverse feature, the automatic window reverse will not operate. Information The automatic reverse feature is only active when the “Auto Up” feature is used by fully pulling up the switch to the second detent. WARNING Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage. Objects less than 0.16 inch (4 mm) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse window and the window will not stop and reverse direction. 5-25 Convenience Features NOTICE Do not install any accessories on the windows. The automatic reverse feature may not operate. Power Window Lock Switch WARNING Do not allow children to play with the power windows. Keep the driver’s door power window lock switch in the LOCK position. Serious injury or death can result from unintentional window operation by a child. NOTICE OQX059017L The driver can disable the power window switches on the rear passenger doors by pressing the power window lock switch. When the power window lock switch is pressed: • The rear passenger control will not be able to operate the rear passenger power window • Note that the front passenger control is still able to operate the front passenger window, and that the driver master control can still operate all the power windows. 5-26 • To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse. • Never try to operate the main switch on the driver’s door and the individual door window switch in opposite directions at the same time. If this is done, the window will stop and cannot be opened or closed. 05 SUNROOF (IF EQUIPPED) If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control switch located on the overhead console. „ Type A WARNING • Adjust the sunroof or sunshade when your vehicle stops. This could result in loss of control and an accident that may cause injury, or property damage. • Do not extend your head, arms or body outside the sunroof while driving, to avoid serious injury. • Do not sit on the top of the vehicle. It may cause injury or vehicle damage. NOTICE OQX059018L „ Type B Do not operate sunroof when roof bars are installed on the vehicle or when there is luggage on the roof. OQX059075 The sunroof can only be operated when the ignition switch or Engine Start/Stop button is in the ON or START position. The sunroof can be operated for approximately 30 seconds after the ignition switch or Engine Start/Stop button is in the ACC or LOCK/OFF position. 5-27 Convenience Features Sunshade Tilt Open/close OCN7050029 Use the sunshade to block direct sunlight coming through the sunroof glass. Open or close the sunshade by hand. Information The sunshade opens automatically when the sunroof glass is opened, but the sunshade does not close automatically when the sunroof glass is closed. Also, only the sunshade cannot be closed when the sunroof glass is opened. NOTICE Do not pull the sunshade up or down, or apply excessive force as such action may damage the sunshade or cause it to malfunction. 5-28 OQX052201N (1) Tilt open (2) Tilt close • Push the sunroof switch upward, the sunroof glass tilts open. • Push the sunroof switch forward when the sunroof glass is tilt opened, the sunroof glass closes. The sunroof glass tilts open or closes while the switch is pushed. Information The sunroof glass cannot slide open and tilt open at the same time. You cannot tilt the sunroof glass open while the sunroof glass is slide open. Also, you cannot slide the sunroof glass open while the sunroof is tilt open. Slide open or tilt open the sunroof glass when the sunroof glass is completely closed. 05 Sunroof Opening and Closing Automatic Reversal OQX051200 • Push the sunroof switch rearward, the sunshade and sunroof glass slide open. Push the sunroof switch forward, only the sunroof glass closes. • Push the sunroof switch forward or rearward to the first detent position, the sunroof glass moves until the switch is released. • Push the sunroof switch forward or rearward to the second detent position, the sunroof glass operates automatically (auto slide feature). To stop the sunroof movement at any point, push the sunroof switch in any direction. • The sunroof glass stops halfway (first detent position) before it is fully opened. To fully open the sunroof glass, push the sunroof switch rearward once more. At this time, the sunroof glass opens only while the switch is pushed. ODH043039 If the sunroof glass senses any obstacle while it is closing automatically, it will reverse direction then stop at a certain position. The auto reverse function may not work if an object thin or soft is caught between the sliding sunroof glass and sunroof sash. WARNING • Make sure heads, hands, arms or any other body parts or objects are out of the way before operating the sunroof. Body parts or objects may get caught causing injuries or vehicle damage. • Never deliberately use your body parts to test the automatic reversal function. The sunroof glass may reverse direction, but there is a risk of injury. Information To reduce wind noise while driving, drive at the recommended position (first detent position) before the maximum slide open position. 5-29 Convenience Features NOTICE • Do not continue to push the sunroof switch after the sunroof is fully opened, closed, or tilted. Damage to the sunroof motor could occur. • Continuous operations such as slide open/close, tilt open/close, etc. may cause the motor or sunroof system to malfunction. • Regularly remove any accumulated dust on the sunroof rail. • Dust accumulated between the sunroof and roof panel can make noise. Open the sunroof and remove dust regularly using a clean cloth. • Do not try to open the sunroof when the temperature is below freezing or when the sunroof is covered with snow or ice. The sunroof may not work properly and may break if opened by force. • Do not open or drive with the sunroof glass open immediately after rain or washing the vehicle. Water may wet the interior of the vehicle. • Do not extend any luggage outside the sunroof while driving. Vehicle damage may occur if the vehicle suddenly stops. WARNING Do not extend your head, arms, body parts or objects outside the sunroof while driving. Injuries may occur if the vehicle suddenly stops. 5-30 Resetting the Sunroof „ Type A OQX051202 „ Type B OQX051203 In some circumstances resetting the sunroof operation may need to be performed. Some instances where resetting the sunroof may be required include: • When the 12-volt battery is either disconnected or discharged • When the sunroof fuse is replaced • If the sunroof one-touch AUTO OPEN/ CLOSE operation is not functioning properly 05 Sunroof resetting procedure: 1. It is recommended to perform the reset procedure with the vehicle engine running. Start the vehicle in P (Park). 2. Make sure the sunroof glass is in the fully closed position. If the sunroof glass is open, push the switch forward until the sunroof glass is fully closed. 3. Release the switch when the sunroof glass is fully closed. 4. Push the switch forward until the sunroof glass moves slightly. Then release the switch. 5. Once again push and hold the sunroof switch forward until the sunroof glass slides open and close. Do not release the switch until the operation is completed. If you release the switch during operation, start the procedure again from step 2. Information If the sunroof does not reset when the vehicle battery is disconnected or discharged, or the sunroof fuse is blown, the sunroof may not operate normally. Sunroof Open Warning OQX049015L If the driver turns off the engine when the sunroof is not fully closed, the warning chime will sound for several seconds and the sunroof open warning will appear on the cluster display. Close the sunroof securely when leaving your vehicle. CAUTION Make sure the sunroof is closed fully when leaving your vehicle. If the sunroof is left open, rain or snow may wet the interior of the vehicle. Also, leaving the sunroof open when the vehicle is unattended may invite theft. 5-31 Convenience Features HOOD Opening the Hood OQXI059023N OQX059020L 1. Park the vehicle and set the parking brake. 2. Pull the release lever to unlatch the hood. The hood should pop open slightly. OQX059080N 3. Go to the front of the vehicle, raise the hood slightly, push up the secondary latch (1) inside of the hood center and lift the hood (2). 5-32 4. Pull out the support rod and hold the hood open with the support rod. WARNING The support rod must be inserted completely into the hole provided whenever you inspect the engine compartment. This will prevent the hood from becoming dislodged and falling and causing potential injury. 05 Closing the Hood 1. Before closing the hood, check in and around the engine compartment to ensure the following: • Any tools or other loose objects are removed from the engine room area or hood opening area • All glove, rags, or other combustible material is removed from the engine compartment • All filler caps are tightly and correctly installed 2. Lower the hood halfway (lifted approximately 12 inches (30 cm) from the closed position) and push down to securely lock in place. Then double check to be sure the hood is secure. If the hood can be raised slightly, it is not securely locked. Open it again and close it with more force. WARNING • Before closing the hood, ensure all obstructions are removed from around the hood opening. • Always double check to be sure that the hood is firmly latched before driving away. Check there is no hood open warning light or message displayed on the instrument cluster. Driving with the hood opened may cause a total loss of visibility, which might result in an accident. • Do not move the vehicle with the hood in the raised position, as vision is obstructed, which might result in an accident, and the hood could fall or be damaged. 5-33 Convenience Features LIFTGATE Opening the Liftgate Closing the Liftgate OQX052159N Before attempting to open the liftgate, make sure the vehicle is in PARK (P). To open the liftgate, perform the following. 1. Unlock the vehicle using either the remote key fob (Key Start vehicles), the Smart Key (Push Button Start vehicles), or the Unlock button on the driver side armrest. 2. From outside the vehicle, press the liftgate handle OQX059148N Lower the liftgate lid and press down until it locks. To be sure the liftgate lid is securely fastened, always check by trying to pull it up again without pressing the liftgate handle button. Information In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions. WARNING The liftgate swings upward. Make sure no objects or people are near the rear of the vehicle when opening the liftgate. NOTICE Make certain that you close the liftgate before driving your vehicle. Possible damage may occur to the liftgate struts and mounting hinges if the liftgate is not closed prior to driving. 5-34 05 To unlock and open the liftgate manually from inside the luggage compartment, perform the following steps: 1. Insert the mechanical key from the key fob or a small screwdriver into the slot at the bottom of the liftgate inside the luggage compartment. 2. Slide the key or screwdriver to the right to engage the safety release lever. 3. Push the liftgate outward and upward. WARNING OQX059134L Do not hold on to or try to pull on the liftgate strut. Be aware that the deformation of the liftgate strut may cause vehicle damage and risk of injury. Emergency Liftgate Safety Release WARNING • Be aware of the location of the emergency liftgate safety release lever in your vehicle and know how to open the liftgate using the safety release lever. • No one should be allowed to occupy the luggage compartment of the vehicle at any time. The luggage compartment is a very dangerous location in the event of a crash. • Use the release lever for emergencies only. Use extreme caution, especially while the vehicle is in motion. OQX059135L Your vehicle is equipped with an emergency liftgate safety release lever located on the bottom of the liftgate inside the vehicle. 5-35 Convenience Features FUEL FILLER DOOR Opening the Fuel Filler Door Information If the fuel filler door does not open because ice has formed around it, tap lightly or push on the door to break the ice and release the door. Do not pry on the door. If necessary, spray around the door with an approved deicer fluid (do not use radiator antifreeze) or move the vehicle to a warm place and allow the ice to melt. Closing the Fuel Filler Door OQX059021L The fuel filler door is opened from inside the vehicle using the fuel filler door release lever. 1. Turn the engine off. Locate the fuel filler door release lever on the floor on the left side of the driver seat. 2. Pull up on the release lever. OQXI049021 3. Pull the fuel filler door (1) outward to access the fuel tank cap. 4. To remove the fuel tank cap (2), turn it counterclockwise. You may hear a hissing noise as the pressure inside the tank equalizes. 5. Place the cap on the fuel filler door. 5-36 1. To install the fuel tank cap, turn it clockwise until it “clicks” one time. 2. Close the fuel filler door until it is latched securely. WARNING Gasoline is highly flammable and explosive. Failure to follow these guidelines may result in SERIOUS INJURY or DEATH: • Read and follow all warnings posted at the gas station. • Before refueling, note the location of the Emergency Gasoline Shut-Off, if available, at the gas station. • Before touching the fuel nozzle, you should eliminate the potential buildup of static electricity by touching a metal part of the vehicle, a safe distance away from the fuel filler neck, nozzle, or other gas source, with your bare hand. • Do not use cellular phones while refueling. Electric current and/or electronic interference from cellular phones can potentially ignite fuel vapors and cause a fire. 05 • Do not get back into a vehicle once you have begun refueling. You can generate a buildup of static electricity by touching, rubbing or sliding against any item or fabric capable of producing static electricity. Static electricity discharge can ignite fuel vapors causing a fire. If you must re-enter the vehicle, you should once again eliminate potentially dangerous static electricity discharge by touching a metal part of the vehicle, away from the fuel filler neck, nozzle or other gasoline source, with your bare hand. • When using an approved portable fuel container, be sure to place the container on the ground prior to refueling. Static electricity discharge from the container can ignite fuel vapors causing a fire. Once refueling has begun, contact between your bare hand and the vehicle should be maintained until the filling is complete. • Use only approved portable plastic fuel containers designed to carry and store gasoline. • When refueling, always move the shift lever to the P (Park) position (for Intelligent variable transmission), set the parking brake, and place the ignition switch to the LOCK/ OFF position. Sparks produced by electrical components related to the engine can ignite fuel vapors causing a fire. • Do not use matches or a lighter and do not smoke or leave a lit cigarette in your vehicle while at a gas station, especially during refueling. • Do not over-fill or top-off your vehicle tank, which can cause gasoline spillage. • If a fire breaks out during refueling, leave the vicinity of the vehicle, and immediately contact the manager of the gas station and then contact the local fire department. Follow any safety instructions they provide. • If pressurized fuel sprays out, it can cover your clothes or skin and thus subject you to the risk of fire and burns. Always remove the fuel cap carefully and slowly. If the cap is venting fuel or if you hear a hissing sound, wait until the condition stops before completely removing the cap. • Always check that the fuel cap is installed securely to prevent fuel spillage in the event of an accident. Information Make sure to refuel your vehicle according to the “Fuel Requirements” suggested in the Introduction chapter. NOTICE • Do not spill fuel on the exterior surfaces of the vehicle. Any type of fuel spilled on painted surfaces may damage the paint. • If the fuel filler cap requires replacement, use only a genuine HYUNDAI cap or the equivalent specified for your vehicle. An incorrect fuel filler cap can result in a serious malfunction of the fuel system or emission control system. 5-37 Convenience Features LIGHTING Exterior Lights Lighting Control To operate the lights, turn the knob at the end of the control lever to one of the following positions: OOS047404N 1. 2. 3. 4. OFF AUTO headlight Tail lamp Headlight Cornering lamp (if equipped) While driving a corner, for greater visibility and safety, either the left or right side cornering lamp will turn on automatically. The cornering lamp will turn on when one of the following conditions occur. • Vehicle speed is less than 6 mph (10 km/h) and steering wheel angle is turned approximately 80 degrees with the low beam on. • Vehicle speed is between 6 mph (10 km/h) to 56 mph (90 km/h) and steering wheel angle is turned approximately 35 degrees with the low beam on. • When the vehicle is in reverse with one of the conditions above satisfied, the light opposite to the direction the steering wheel is turned will turn on. Daytime running light (DRL) (if equipped) The Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day, especially after dawn and before sunset. The DRL system will turn the dedicated lamp OFF when: • The headlights are ON. • The tail lamps are ON. • The vehicle is turned off. • The parking brake is engaged. 5-38 OQX049021L AUTO headlight (if equipped) The tail lamp and headlight will be turned ON or OFF automatically depending on the amount of daylight as measured by the ambient light sensor on the center dash (1). Even with the AUTO headlight feature in operation, it is recommended to manually turn ON the headlights when driving at night or in a fog, driving in the rain, or when you enter dark areas, such as tunnels and parking facilities. 05 NOTICE • Do not cover or spill anything on the sensor (1) located in front of the instrument panel. • Do not clean the sensor using a window cleaner, the cleanser may leave a light film which could interfere with sensor operation. • If your vehicle has window tint or other types of metallic coating on the front windshield, the AUTO headlight system may not work properly. Information The ignition switch must be in the ON position to turn on the headlight. High Beam Operation OIG046415 OIG046412 Tail lamp ( ) The tail lamp, license plate lamp and instrument panel lamp are turned ON. To turn on the high beam headlight, push the lever away from you. The lever will return to its original position. The high beam indicator will light when the headlight high beams are switched on. To turn off the high beam headlight, pull the lever towards you. The low beams will turn on. WARNING Do not use high beam when there are other vehicles approaching you. Using high beam could obstruct the other driver’s vision. OIG046413 Headlight ( ) The headlight, tail lamp, license plate lamp and instrument panel lamp are turned ON. 5-39 Convenience Features OIG046414 To flash the high beam headlight, pull the lever towards you, then release the lever. The high beams will remain ON as long as you hold the lever towards you. High Beam Assist (HBA) (if equipped) OOS047409N High Beam Assist (HBA) is a system that automatically adjusts the headlight range (switches between high beam and low beam) according to the brightness of other vehicles and road conditions. 5-40 Operating condition 1. Place the headlight switch in the AUTO position. 2. Turn on the high beam by pushing the lever away from you. The High Beam Assist ( ) indicator will illuminate. 3. High Beam Assist system will turn on when vehicle speed is above 25 mph (40 km/h). • If the headlight switch is pushed away when the High Beam Assist system is operating, High Beam Assist system will turn off and the high beam will be on continuously. • If the headlight switch is pulled towards you when the high beam is OFF, the high beam will turn ON without High Beam Assist system canceled. When you let go of the light switch, the lever will move to the middle and the high beam will turn OFF. • If the headlight switch is pulled towards you when the high beam is on by High Beam Assist system, the low beam will be on and the High Beam Assist system will turn OFF. • If the headlight switch is placed to the headlight ON position, High Beam Assist system will turn off and the low beam will be on continuously. 05 When High Beam Assist system is operating, the high beam switches to low beamif any of the following conditions occur: - When the headlight of an on-coming vehicle is detected. - When the tail lamp of a vehicle in front is detected. - When the headlight or tail lamp of a motorcycle or a bicycle is detected. - When the surrounding ambient light is bright enough that high beams are not required. - When streetlights or other lights are detected. - When the headlight switch is not in the AUTO position. - When High Beam Assist system is off. - When vehicle speed is below 22MPH (35 km/h). OQX072059N Warning light and message When High Beam Assist system is not working properly, the Check High Beam Assist warning message will come on for a few second. After the message disappears, the master warning light ( ) will illuminate. Take your vehicle to an authorized HYUNDAI dealer and have the system checked. CAUTION The system may not operate normally if any of the following conditions should occur: 1. When the illumination from an oncoming vehicle or a vehicle in front is dim. Such examples may include: • When the headlights of an oncoming vehicle or the tail lamps of a vehicle in front is covered with dust, snow, or water. • When the headlights on an oncoming vehicle are OFF, but the fog lamps are ON. 5-41 Convenience Features 2. When the High Beam Assist camera is adversely affected by an external condition. Such examples may include: • When the vehicle’s headlights have been damaged or not repaired properly. • When the vehicle headlights are not aimed properly. • When the vehicle is driven on a narrow curved road or rough road • When the vehicle is driven on an uphill road or downhill road • When only part of the vehicle in front is visible on a crossroad or curved road. • When there is a traffic light, reflecting sign, flashing sign or mirror. • When the road conditions are bad such as being wet or covered with snow. • When a vehicle suddenly appears from a curve. • When the vehicle is tilted from a flat tire or being towed. • When the Lane Keeping Assist system warning light illuminates. • When the light from the on-coming or front vehicle is not detected because of exhaust fume, smoke, fog, snow, etc. • When the front window is covered with foreign matters such as ice, dust, fog, or is damaged. 3. When the forward visibility is poor. Such examples may include: • When the headlights of an oncoming vehicle or a vehicle in front is not detected due to poor outside visibility (smog, smoke, dust, fog, heavy rain, snow, etc.). • When the windshield visibility is poor. 5-42 WARNING • Do not attempt to disassemble the front view camera without the assistance of an authorized HYUNDAI dealer technician. If the front camera is removed for any reason, the system may need to be re-calibrated. Have the system inspected by an authorized HYUNDAI dealer. • If the windshield of your vehicle is replaced, most likely the front view camera will need to be re-calibrated. If this occurs, have your vehicle inspected and have the system recalibrated by an authorized HYUNDAI dealer. • Be careful that water doesn’t get into High Beam Assist unit and do not remove or damage related parts of High Beam Assist system. • Do not place objects on the crash pad that reflect light such as mirrors, white paper, etc. The system may malfunction if sunlight is reflected. • At times, High Beam Assist system may not work properly. The system is for your convenience only. It is the responsibility of the driver for safe driving practices and always check the road conditions for your safety. • When the system does not operate normally, change the headlight position manually between the high beam and low beam. 05 Turn Signals And Lane Change Signals OIG046417 To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement. Onetouch turn signal function To activate the One Touch Turn Signal function, push the turn signal lever up or down to position (B) and then release it. The lane change signals will blink 3, 5 or 7 times. You can activate or deactivate the One Touch Turn Signal function or choose the number of blinks (3, 5, or 7) from the User Settings mode in the cluster display. For more information, refer to the “Cluster Display” section in this chapter. Battery Saver Function The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the tail lamp when the driver turns the vehicle off and opens the driver-side door. With this feature, the tail lamps will turn off automatically if the driver parks on the side of road at night. However, the position lamps stay ON even when the driver-side door is opened if the headlight switch is turned to the position lamp OFF or AUTO position after the engine is turned off. If necessary, to keep the lamps on turn the position lamps OFF and ON again using the headlight switch on the steering column after the engine is turned off. Headlight Delay Function If the key is removed from the ignition switch or placed in the ACC position or the LOCK/OFF position with the headlights ON, the headlights (and/or tail lamps) remain on for about 5 minutes. However, if the driver’s door is opened and closed, the headlights are turned off after 15 seconds. Also, with the engine off if the driver’s door is opened and closed, the headlights (and/or tail lamps) are turned off after 15 seconds. The headlights (and/or tail lamps) can be turned off by pressing the lock button on the remote key or smart key twice or turning the headlight switch to the OFF or AUTO position. You can activate or deactivate the Headlight Delay function from the User Settings Mode in the cluster display. For more information, refer to the “Cluster Display” section in this chapter. 5-43 Convenience Features NOTICE Front Lamps If the driver exits the vehicle through another door besides the driver door, the battery saver function does not operate and the headlight delay function does not turn OFF automatically. This may cause the battery to discharge. To avoid battery discharge, turn OFF the headlights manually from the headlight switch before exiting the vehicle. „ Type A Interior Lights „ Type B OQX059041L WARNING Do not use the interior lights when driving in the dark. The interior lights may obscure your view and cause an accident. NOTICE Do not use the interior lights for extended periods when the vehicle is turned off or the battery will discharge. Interior Lamp AUTO Cut The interior lamps will automatically go off approximately 20 minutes after the engine is turned off and the doors are closed. If a door is opened, the lamp will go off 40 minutes after the engine is turned off. If the doors are locked by the remote key or smart key and the vehicle enters the armed stage of the theft alarm system, the lamps will go off five seconds later. 5-44 OQX059023L Front Map Lamp (1): Press either lenses to turn the map lamp on or off. This light produces a spot beam for convenient use as a map lamp at night or as a personal lamp for the driver and the front passenger. 05 Front Door Lamp (2) ( ): The front or rear room lamps come on when the front or rear doors are opened if the engine is running or not. When doors are unlocked by the remote key or smart key, the front and rear lamps come on for approximately 30 seconds as long as any door is not opened. The front and rear room lamps go out gradually after approximately 30 seconds when the door is closed. However, if the ignition switch is in the ON position or all doors are locked, the front and rear lamps will turn off. If a door is opened with the ignition switch in the ACC position or the OFF position, the front and rear lamps stay on for about 20 minutes. Front room lamp • (3): Press the button to turn ON the room lamp for the front/rear seats. • (4): Press the button to turn OFF the room lamp for the front/rear seats regardless of front or rear door open position. Rear Lamp „ Type A OOS047321 „ Type B OQX059024L Rear Room Lamp ( ): Press this switch to turn the rear room lamp on and off. 5-45 Convenience Features (1): The room lamp for the rear seats is automatically turned ON for approximately 30 seconds, when a door is opened. The room lamp for the rear seats is automatically turned ON for approximately 15 seconds, when the remote key (smart key) unlocks the doors. The room lamp fades out, when the ignition switch is placed to the ON position in 15 seconds. The room lamp remains ON up to 20 minutes, when a door is opened with the ignition switch in the either the ACC or OFF position. (2): With the Rear Room Lamp in this position, the rear room lamp remain on at all times. (3): With the Rear Room Lamp in this position the rear room lamp remain off at all times. NOTICE Do not leave the lamp switches on for an extended period of time when the engine is turned off. Luggage Compartment Lamp OQX059025L The luggage compartment lamp comes on when the liftgate is opened. NOTICE The luggage compartment lamp comes on as long as the liftgate is open.To prevent unnecessary battery system drain, close the liftgate securely after using the luggage compartment. Vanity Mirror Lamp OQX059001L Push the switch to turn the light on or off. • : The lamp will turn on if this button is pressed. • : The lamp will turn off if this button is pressed. NOTICE 5-46 Always have the switch in the off position when the vanity mirror lamp is not in use. If the sunvisor is closed without the lamp off, it may discharge the battery or damage the sunvisor. 05 WIPERS AND WASHERS Windshield Wipers „ Front windshield wiper/washer OTLE045161 „ Rear windshield wiper/washer Operates as follows when the ignition switch is in the ON position. MIST: For a single wiping cycle, push the lever upward and release. The wipers will operate continuously if the lever is held in this position. OFF: Wiper is not in operation. INT: Wiper operates intermittently at the same wiping intervals. To vary the speed setting, move the speed control lever. The top most setting will run the wipers most frequently (for more rain). The bottom setting will run the wipers the least frequently (for less rain). LO: The wiper runs at a lower speed. HI: The wiper runs at a higher speed. Information OTLE045508 A. Wiper speed control • MIST – Single wipe • OFF – Off • INT – Intermittent wipe • LO– Low wiper speed • HI – High wiper speed B. Intermittent control wipe time adjustment C. Wash with brief wipes (pull lever towards you) D. Rear wiper/washer control • HI – High wiper speed • LO – Low wiper speed • OFF – Off E. Wash with brief wipes (rear) (push lever away from you) If there is heavy accumulation of snow or ice on the windshield, defrost the windshield for about 10 minutes, or until the snow and/or ice is removed before using the windshield wipers to ensure proper operation. If you do not remove the snow and/or ice before using the wiper and washer, it may damage the wiper and washer system. 5-47 Convenience Features Windshield Washers WARNING When the outside temperature is below freezing, ALWAYS warm the windshield using the defroster to help prevent the washer fluid from freezing on the windshield and obscuring your vision which could result in an accident and serious injury or death. NOTICE OTLE045164 In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. The spray and wiper operation will continue until you release the lever. If the washer does not work, you may need to add washer fluid to the washer fluid reservoir. 5-48 • To prevent possible damage to the washer pump, do not operate the washer when the fluid reservoir is empty. • To prevent possible damage to the wipers or windshield, do not operate the wipers when the windshield is dry. • To prevent damage to the wiper arms and other components, do not attempt to move the wipers manually. • To prevent possible damage to the wipers and washer system, use antifreezing washer fluids in the winter season or cold weather. 05 Rear Window Wiper and Washer Auto Rear Wiper The rear wiper will operate while the vehicle is in reverse with the front wiper ON by selecting the function on the cluster display. Go to ‘User Settings → Convenience → Auto Rear Wiper (in R)’. Information OTLE045165 The rear window wiper and washer switch is located at the end of the wiper and washer switch lever. Turn the switch to the desired position to operate the rear wiper and washer. HI – High wiper speed LO – Low wiper speed OFF – Off The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide. OTLE045166 Push the lever away from you to spray rear washer fluid and to run the rear wipers 1~3 cycles. The spray and wiper operation will continue until you release the lever. 5-49 Convenience Features MANUAL CLIMATE CONTROL SYSTEM (IF EQUIPPED) OQX059100L 1. 2. 3. 4. Mode selection knob Fan speed control knob Temperature control knob Air intake control button (recirculated air position or outside (fresh) air position) 5-50 5. Rear window defroster button (if equipped) 6. A/C (Air conditioning) button 05 Heating and Air Conditioning 1. Start the engine. 2. Set the mode to the desired position. To improve the effectiveness of heating and cooling, select the mode according to the following: • Heating: • Cooling: 3. Set the temperature control to the desired position. 4. Set the air intake control to fresh mode or recirculation mode position. 5. Set the fan speed control to the desired speed. 6. If air conditioning is desired, turn the air conditioning system on. Mode Selection (1) OQX052217N The mode selection knob controls the direction of the air flow through the ventilation system. Air can be directed to the floor, dashboard outlets, or windshield. Five symbols are used to represent Face, Bi-Level, Floor, Floor-Defrost and Defrost air position. 5-51 Convenience Features Face-Level (B, D) Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet. Bi-Level (B, C, D) Air flow is directed towards the face and the floor. Floor-Level (A, C, D) Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters. Floor & Defrost (A, C, D) Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters. Defrost-Level (A, D) Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters. 5-52 OQX059102L MAX A/C-Level (B, D) The MAX A/C mode is used to cool the inside of the vehicle faster. Air flow is directed toward the upper body and face. In this mode, the A/C button and the Recirculation mode button cannot be selected. Turn the fan speed mode to adjust. After the interior cabin has cooled sufficiently, move the temperature knob away from the MAX A/C setting and adjust the knob to the desired position. If you wish to continue using A/C ON, make sure the A/C button LED is illuminated. 05 Instrument Panel Vents Air Intake Control (4) OQX059103L The instrument panel vent air flow can be directed up/down or left/right using the vent adjustment lever. The air flow can also be CLOSED using the vent adjustment lever. The instrument panel air vents are the “clickto-close” type. To CLOSE the instrument panel vents perform the following: • For the driver side vents, slide the vent adjustment lever to the left until it clicks. • For the passenger side vents, slide the vent adjustment lever to the right until it clicks. Temperature Control (3) OQXI049309 The air intake control button is used to select either Fresh mode (outside air) or Recirculation mode (cabin air). Recirculation mode When Recirculation mode is selected, air from the passenger compartment will be recirculated through the system and heated or cooled according to the function selected. Fresh mode When Fresh mode is selected, air enters the vehicle from outside and is heated or cooled according to the function selected. Information OQX059102L The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left. Using the system primarily in Fresh mode and Recirculation mode only when needed is recommended for best results. Prolonged operation of the heater in Recirculation mode and without the A/C ON can cause fogging of the windshield. In addition, prolonged use of the A/C ON in Recirculation mode may result in excessively dry, dehumidified air in the cabin. 5-53 Convenience Features NOTICE WARNING • Continued use of the climate control system operation in Recirculation mode for a prolonged period of time may cause drowsiness to the occupants in the cabin. This may lead to loss of vehicle control which may lead to an accident. • Continued use of the climate control system operation in Recirculation mode with the A/C OFF may allow humidity to increase inside the cabin. This may cause condensation to accumulate on the windshield and obscure visibility. • Do not sleep in your vehicle or remain parked in your vehicle with the windows up and either the heater or the air conditioning ON for prolonged periods of time. Doing so may increase the levels of carbon dioxide in the cabin which may lead to serious injury or death. Operating the fan speed when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan speed when the engine is running. Fan Speed Control (2) Cooling / Ventilation Air Conditioning (6) OQX059104L Push the A/C button to turn the system on (indicator light will illuminate) and off. System Operation 1. Select the Face Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. OQXI049310 Turn the knob to the right to increase the fan speed and airflow. Turn the knob to the left to decrease fan speed and airflow. Setting the fan speed control knob to the “0” position turns off the fan. 5-54 05 Heating Air conditioning 1. Select the Floor Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. 5. If desired, turn the air conditioning ON with the temperature control knob set to heat in order to dehumidify the air before it enters into the cabin. If the windshield fogs up, select the Floor mode or press the Front & Defrost Defrost mode. HYUNDAI Air Conditioning Systems are filled with R-1234yf refrigerant. 1. Start the engine. Push the air conditioning button. 2. Set the mode to the position. 3. Set the air intake control to the outside air or recirculated air position. 4. Adjust the fan speed control and temperature control to maintain maximum comfort. Operation Tips • To keep dust or unpleasant fumes from entering the vehicle through the ventilation system, temporarily set the air intake control to recirculation mode. Return the control to Fresh mode when the unpleasant air outside has diminished. This will help keep the driver alert and comfortable. • To help prevent the inside of the windshield from fogging, set the air intake control to fresh mode and fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to the desired temperature. NOTICE When using the air conditioning system, monitor the engine temperature gauge closely while driving up hills or in heavy traffic when outside temperatures are high. Air conditioning system operation when climbing a steep grade or in high outside ambient temperatures can cause engine overheating. Continue to use the fan, but turn the air conditioning system off if the engine temperature gauge indicates engine overheating. 5-55 Convenience Features Air conditioning system operation tips • If the vehicle has been parked in direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape. • After sufficient cooling has been achieved, switch back from the recirculated air to the fresh outside air position. • To help reduce moisture inside of the windows on rainy or humid days, decrease the humidity inside the vehicle by operating the air conditioning system with the windows and sunroof closed. • Use the air conditioning system every month only for a few minutes to ensure maximum system performance. • If you operate air conditioner excessively, the difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob position and fan or button to the speed control to the lower speed. System Maintenance Cabin Air Filter OIK047401L [A] : Outside air, [B] : Recirculated air [C] : Cabin air filter, [D] : Blower [E] : Evaporator core, [F] : Heater core The cabin air filter is installed behind the glove box. It filters the dust or other pollutants that enter the vehicle through the heating and air conditioning system. Have the cabin air filter replaced by an authorized HYUNDAI dealer according to the maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or rough roads, more frequent cabin air filter inspections and changes are required. If the air flow rate suddenly decreases, the system should be checked at an authorized HYUNDAI dealer. Checking the Amount of Air Conditioner Refrigerant and Compressor Lubricant When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system. Therefore, if abnormal operation is found, have the system inspected by an authorized HYUNDAI dealer. 5-56 05 NOTICE • The refrigerant system should only be serviced by trained and certified technicians to insure proper and safe operation. • The refrigerant system should be serviced in a well-ventilated place. • The air conditioning evaporator (cooling coil) shall never be repaired or replaced with one removed from a used or salvaged vehicle and new replacement MAC evaporators shall be certified (and labeled) as meeting SAE Standard J2842. NOTICE It is important that the correct type and amount of oil and refrigerant is used. Otherwise, damage to the compressor and abnormal system operation may occur. To prevent damage, the air conditioning system in your vehicle should only be serviced by trained and certified technicians. OQX089050N Air conditioning refrigerant label You can find out which air conditioning refrigerant is applied to your vehicle on the label located underside of the hood. „ Example WARNING Vehicles equipped with R-1234yf Since the refrigerant is mildly flammable and operated at high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant are used. All refrigerants should be reclaimed with proper equipment. Venting refrigerants directly to the atmosphere is harmful to individuals and environment. Failure to heed these warnings can lead to serious injuries. OHYK059001 Each symbol and specification on the air conditioning refrigerant label is represented as below: 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of compressor lubricant 4. Caution 5. Flammable refrigerant 6. To require registered technician to service air conditioning system 5-57 Convenience Features AUTOMATIC CLIMATE CONTROL SYSTEM OQX059105L 1. 2. 3. 4. 5. Fan speed control knob Temperature control knob AUTO (automatic control) button OFF button Mode selection button 5-58 6. Recirculation mode/Fresh mode 7. Rear window defroster button (if equipped) 8. Front windshield defroster button 9. A/C (Air conditioning) button 10. Climate control screen 05 Automatic Temperature Control Mode The Automatic Climate Control System is controlled by setting the desired temperature. 1. Press the AUTO button (3). The modes, fan speeds, air intake and air-conditioning will be controlled automatically by the temperature setting you select. 2. Turn the temperature control knob (2) to the desired temperature. If the temperature is set to the lowest setting (Lo), the air conditioning system will operate continuously. After the interior has cooled sufficiently, adjust the knob to a higher temperature set point whenever possible. To turn the automatic operation off, select any button of the following: • Mode selection button • Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The ‘AUTO’ sign will illuminate on the information display once again.) • Fan speed control button The selected function will be controlled manually while other functions operate automatically. For your convenience and to improve the efficiency of the climate control, use the AUTO button and set the temperature to 72°F (22°C). To change the temperature unit from °F to °C or °C to °F: Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds. OQX059097 NOTICE Never place anything near the ambient light/solar sensor to ensure better control of the heating and cooling system. 5-59 Convenience Features Manual Temperature Control Mode The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected. When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically. 1. Start the engine. 2. Set the mode to the desired position. 3. 4. 5. 6. 7. To improve the effectiveness of heating and cooling, select the mode according to the following: • Heating: • Cooling: Set the temperature control to the desired position. Set the air intake control to Fresh mode position. Set the fan speed control to the desired speed. If air conditioning is desired, turn the air conditioning system on. Press the AUTO button to convert to full automatic control of the system. Mode Selection (5) OQX052156N 5-60 05 The mode selection button controls the direction of the air flow through the ventilation system. Instrument Panel Vents The air flow outlet direction is cycled as follows: Face-Level (B, D) OQX059103L Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet. Bi-Level (B, C, D) Air flow is directed towards the face and the floor. Floor & Defrost (A, C, D) Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters. The instrument panel vent air flow can be directed up/down or left/right using the vent adjustment lever. The air flow can also be CLOSED using the vent adjustment lever. The instrument panel air vents are the “clickto-close” type. To CLOSE the instrument panel vents perform the following: • For the driver side vents, slide the vent adjustment lever to the left until it clicks. • For the passenger side vents, slide the vent adjustment lever to the right until it clicks. Floor-Level (A, C, D) Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters. Defrost-Level (A, D) (8) Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters. 5-61 Convenience Features Temperature Control (2) Information Using the system primarily in Fresh mode and Recirculation mode only when needed is recommended for best results. Prolonged operation of the heater in Recirculation mode and without the A/C ON can cause fogging of the windshield. In addition, prolonged use of the A/C ON in Recirculation mode may result in excessively dry, dehumidified air in the cabin. OQX059106L Turn the knob to the right to increase the temperature. Turn the knob to the left to decrease temperature. The temperature will increase or decrease by 1°F/0.5°C for each incremental location. When set to the lowest temperature setting, the air conditioning will operate continuously. Air Intake Control (6) The air intake control button is used to select either Fresh mode (outside air) or Recirculation mode (cabin air). Recirculation mode When Recirculation mode is selected, air from the passenger compartment will be recirculated through the system and heated or cooled according to the function selected Fresh mode When Fresh mode is selected, air enters the vehicle from outside and is heated or cooled according to the function selected. 5-62 WARNING • Continued use of the climate control system operation in Recirculation mode for a prolonged period of time may cause drowsiness to the occupants in the cabin. This may lead to loss of vehicle control which may lead to an accident. • Continued use of the climate control system operation in Recirculation mode with the A/C OFF may allow humidity to increase inside the cabin. This may cause condensation to accumulate on the windshield and obscure visibility. • Do not sleep in your vehicle or remain parked in your vehicle with the windows up and either the heater or the air conditioning ON for prolonged periods of time. Doing so may increase the levels of carbon dioxide in the cabin which may lead to serious injury or death. 05 Fan Speed Control (1) Air Conditioning (9) OQX059117L The fan speed can be set as desired by pushing the fan speed control button. More air is delivered with higher fan speeds. Pressing the OFF button turns off the fan. OQX059111L Push the A/C button to manually turn the system on (indicator light will illuminate) and off. OFF Mode (4) Information For better sound quality, fan speed may automatically slow down for a couple of minutes when you activate voice recognition or hands free. NOTICE Operating the fan when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan when the engine is running. OQX059110L Push the OFF button to turn the climate control system off. You can still operate the mode and air intake buttons as long as the ignition switch is in the ON position. 5-63 Convenience Features System Operation Air conditioning 1. Select the Face Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. HYUNDAI Air Conditioning Systems are filled with R-1234yf refrigerant. 1. Start the engine. Push the air conditioning button. 2. Set the mode to the position. 3. Set the air intake control to the outside air or recirculated air position. 4. Adjust the fan speed control and temperature control to maintain maximum comfort. Cooling / Ventilation Heating 1. Select the Floor Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. 5. If desired, turn the air conditioning ON with the temperature control knob set to heat in order to dehumidify the air before it enters into the cabin. If the windshield fogs up, select the Floor mode or press the Front & Defrost Defrost mode. Operation Tips • To keep dust or unpleasant fumes from entering the car through the ventilation system, temporarily set the air intake control to the recirculation mode. Return the control to the to Fresh mode when the unpleasant air outside has diminished. This will help keep the driver alert and comfortable. • To help prevent the inside of the windshield from fogging, set the air intake control to fresh mode and the fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to the desired temperature. 5-64 NOTICE When using the air conditioning system, monitor the engine temperature gauge closely while driving up hills or in heavy traffic when outside temperatures. Air conditioning system operation when climbing a steep grade or in high outside ambient temperatures can cause engine overheating. Continue to use the fan, but turn the air conditioning system off if the engine temperature gauge indicates engine overheating. 05 Air conditioning system operation tips • If the vehicle has been parked in direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape. • After sufficient cooling has been achieved, switch back from the recirculated air to the fresh outside air position. • To help reduce moisture inside of the windows on rainy or humid days, decrease the humidity inside the vehicle by operating the air conditioning system with the windows and sunroof closed. • Use the air conditioning system every month only for a few minutes to ensure maximum system performance. • If you operate air conditioner excessively, the difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob position and fan or button to the speed control to the lower speed. System Maintenance Cabin Air Filter OIK047401L [A] : Outside air, [B] : Recirculated air [C] : Cabin air filter, [D] : Blower [E] : Evaporator core, [F] : Heater core The cabin air filter is installed behind the glove box. It filters the dust or other pollutants that enter the vehicle through the heating and air conditioning system. Have the The cabin air filter replaced by an authorized HYUNDAI dealer according to the maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or rough roads, more frequent cabin air filter inspections and changes are required. If the air flow rate suddenly decreases, the system should be checked at an authorized HYUNDAI dealer. 5-65 Convenience Features Checking the Amount of Air Conditioner Refrigerant and Compressor Lubricant When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system. Therefore, if abnormal operation is found, have the system inspected by an authorized HYUNDAI dealer. NOTICE • The refrigerant system should only be serviced by trained and certified technicians to insure proper and safe operation. • The refrigerant system should be serviced in a well-ventilated place. • The air conditioning evaporator (cooling coil) shall never be repaired or replaced with one removed from a used or salvaged vehicle and new replacement MAC evaporators shall be certified (and labeled) as meeting SAE Standard J2842. OQX089050N Air conditioning refrigerant label You can find out which air conditioning refrigerant is applied to your vehicle on the label located underside of the hood. „ Example NOTICE It is important that the correct type and amount of oil and refrigerant is used. Otherwise, damage to the compressor and abnormal system operation may occur. To prevent damage, the air conditioning system in your vehicle should only be serviced by trained and certified technicians. WARNING Vehicles equipped with R-1234yf Since the refrigerant is mildly flammable and operated at high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant are used. All refrigerants should be reclaimed with proper equipment. Venting refrigerants directly to the atmosphere is harmful to individuals and environment. Failure to heed these warnings can lead to serious injuries. 5-66 OHYK059001 Each symbol and specification on the air conditioning refrigerant label is represented as below: 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of compressor lubricant 4. Caution 5. Flammable refrigerant 6. To require registered technician to service air conditioning system 05 WINDSHIELD DEFROSTING AND DEFOGGING WARNING Windshield heating or position Do not use the during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility could cause an accident resulting in serious injury or death. In this case, set the mode selection knob or button to the position and fan speed control knob or button to a lower speed. • For maximum defrost performance, set the temperature control knob to the highest temperature setting (rotated all the way to the right) and the fan speed control to the highest setting. • If warm air to the floor is desired while defrosting or defogging, set the mode to the floor-defrost position. • Before driving, clear all snow and ice from the windshield, rear window, side view mirrors, and all side windows. • Clear all snow and ice from the hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield. Manual Climate Control System OQXI049321 To defog inside windshield 1. Select any fan speed except “0” position. 2. Select the desired temperature. 3. Select the or position. 4. Fresh mode will be selected automatically. Additionally, the air conditioning will automatically operate if the mode is selected to the position. Check to make sure the A/C is ON. If the A/C ON LED is not illuminated, press the A/C button once to turn the air conditioner ON. NOTICE If you start the vehicle when the weather is cold, more adequate way to heat the cabin is described below. 1. Turn off or lower the blower, right after engine starting, because engine temperature is still low and the air flow is cold. 2. After few minutes of engine warm up, turn the blower to low to medium speed and set the temperature control to Hot. 5-67 Convenience Features Check to make sure the air intake control is in Fresh mode. If the air intake control LED is illuminated, press the button once to enable Fresh mode (LED OFF). Check to make sure the air intake control is in Fresh mode. If the air intake control LED for Recirculation mode is illuminated, press the button for Fresh mode until its LED is not illuminated (OFF). position is selected, the fan If the speed is automatically increased. OQXI049322 To defrost outside windshield 1. Set the fan speed to the highest setting (knob rotated all the way to the right). 2. Set the temperature control to the highest temperature setting. 3. Select the position. 4. Fresh mode (Recirculation OFF) and A/C ON will automatically be selected. Automatic Temperature Control System (if equipped) OQX059113L To defog inside windshield 1. Select the desired fan speed. 2. Select the desired temperature. 3. Press the defroster button ( ). 4. Fresh mode will be selected automatically. 5-68 OQX059112L To defrost outside windshield 1. Set the fan speed to the highest (extreme right) position. 2. Set the temperature to the extreme hot (HI) position. 3. Press the defroster button ( ). 4. The outside (fresh) air position will be selected automatically. position is selected, lower fan If the speed is adjusted to a higher fan speed. 05 Rear Window Defroster NOTICE To prevent damage to the rear window defroster conducting elements bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. If you want to defrost and defog the front windshield, refer to the “Windshield Defrosting and Defogging” section in this chapter. „ Manual climate control system • To activate the rear window defroster, press the rear window defroster button located in the center control panel. The indicator on the rear window defroster button illuminates when the defroster is ON. • To turn off the defroster, press the rear window defroster button again. Information • If there is heavy accumulation of snow on the rear window, brush it off before operating the rear defroster. • The rear window defroster automatically turns off after approximately 20 minutes or when the ignition switch is in the LOCK/OFF position. Side View Mirror Defroster (if equipped) OQX059114L If your vehicle is equipped with the side view mirror defrosters, they will operate at the same time you turn on the rear window defroster. „ Automatic climate control system OQX059115L The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while the engine is running. 5-69 Convenience Features STORAGE COMPARTMENT Sliding Armrest (if equipped) WARNING Never store cigarette lighters, propane cylinders, or other flammable/explosive materials in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot temperatures for extended periods. WARNING ALWAYS keep the storage compartment covers closed securely while driving. Items inside your vehicle are moving as fast as the vehicle. If you have to stop or turn quickly, or if there is a crash, the items may fly out of the compartment and may cause an injury if they strike the driver or a passenger. NOTICE To avoid possible theft, do not leave valuables in the storage compartments. Center Console Storage To move the armrest rearward: Grab the front portion of the armrest (1) then push the armrest rearward. WARNING Do not grab the front portion of the armrest (1) when moving the armrest rearward. You may pinch your fingers. OQXI049052 To open: Grab and hold the latch on the arm rest then lift the lid. 5-70 OQXI049053 To move the armrest forward: Grab the front portion of the armrest (1) then pull it forward. 05 INTERIOR FEATURES Glove Box Cup Holder OQX051205 To open: Pull the lever. WARNING ALWAYS close the glove box door after use. An open glove box door can cause serious injury to the passenger in an accident, even if the passenger is wearing a seat belt. OQX059009L Cups or small beverages cups may be placed in the cup holders. WARNING • Avoid abrupt starting and braking when the cup holder is in use to prevent spilling your drink. If hot liquid spills, you could be burned. Such a burn to the driver could cause loss of vehicle control resulting in an accident. • Do not place uncovered or unsecured cups, bottles, cans, etc., in the cup holder containing hot liquid while the vehicle is in motion. Injuries may result in the event of a sudden stop or collision. • Only use soft cups in the cup holders. Hard objects can injure you in an accident. WARNING Keep cans or bottles out of direct sun light and do not put them in a hot vehicle. It may explode. 5-71 Convenience Features NOTICE Power Outlet • Keep your drinks sealed while driving to prevent spilling your drink. If liquid spills, it may get into the vehicle’s electrical/electronic system and damage electrical/electronic parts. • When cleaning spilled liquids do not use hot air to blow out or dry the cup holder. This may damage the interior. Sunvisor OQX052040N The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 180 W with the engine running. WARNING OOS047062 To use the sunvisor, pull it downward. To use the sunvisor to block the sun from the side window, pull it downward, release it from the bracket (1) and swing it to the side (2) towards the window. To use the vanity mirror, pull down the sunvisor and slide the mirror cover (3). Adjust the sunvisor forward or backward (4) as needed (if equipped). NOTICE Close the vanity mirror cover securely and return the sunvisor to its original position after use. WARNING For your safety, do not block your view when using the sunvisor. NOTICE Do not put several tickets in the ticket holder at one time. This could cause damage to the ticket holder. 5-72 Avoid electrical shocks. Do not place your fingers or foreign objects (pin, etc.) into a power outlet or touch the power outlet with a wet hand. 05 NOTICE To prevent damage to the Power Outlets: • Use the power outlet only when the engine is running and remove the accessory plug after use. Using the accessory plug for prolonged periods of time with the engine off could cause the battery to discharge. • Only use 12V electric accessories which are less than 180 W in electric capacity. • Adjust the air-conditioner or heater to the lowest operating level when using the power outlet. • Close the cover when not in use. • Some electronic devices can cause electronic interference when plugged into a vehicle’s power outlet. These devices may cause excessive audio static and malfunctions in other electronic systems or devices used in your vehicle. • Push the plug in as far as it will go. If good contact is not made, the plug may overheat and the fuse may open. • Plug in battery equipped electrical/ electronic devices with reverse current protection. The current from the battery may flow into the vehicle’s electrical/electronic system and cause system malfunction. USB Charger (if equipped) „ Front seat OQX052206N „ Rear seat OQX052218N The USB charger is designed to recharge batteries of small size electrical devices using a USB cable. The electrical devices can be recharged when the ignition switch or the Engine Start/Stop button is in the ACC, ON or START position. The battery charging state may be monitored on the electrical device. Disconnect the USB cable from the USB port after use. • A smart phone or a tablet PC may get warmer during the re-charging process. It does not indicate any malfunction with the charging system. • A smart phone or a tablet PC, which adopts a different re-charging method, may not be properly recharged. In this case, use an exclusive charger of your device. • The charging terminal is only to recharge a device. Do not use the charging terminal either to turn ON an audio or to play media on the Infortainment system. 5-73 Convenience Features Wireless Cellular Phone Charging System (if equipped) OQX052160N [A]: Charging pad, [B]: Indicator light On certain models, the vehicle comes equipped with a wireless smart phone charger. The system is available when all doors are closed, and when the ignition switch or Engine Start/Stop button is in the ON or START position. To charge a cellular phone The wireless cellular phone charging system charges only the Qi-enabled cellular phones. Read the label on the cellular phone accessory cover or visit your cellular phone manufacturer’s website to check whether your cellular phone supports the Qi technology. The wireless charging process starts when you put a Qi-enabled cellular phone on the wireless charging unit. 1. Remove other items, including the smart key, from the wireless charging unit. If not, the wireless charging process may be interrupted. Place the cellular phone on the center of the charging pad ( ). 2. You can turn ON or OFF the wireless charging function in the user settings mode on the instrument cluster. For further information, refer to the “Cluster Display Modes” in chapter 4. 5-74 3. If the wireless charger does not work gently move your smart phone on the pad until charging indicator light turns orange. Depending on the smart phone, the charging indicator light will turn green after the charging is complete. 4. If the wireless charging is not function properly, the orange light will blink and flash for ten seconds then turn off.In such cases remove the smart phone from the pad and replace or double check charging status. If your smart phone is not charging: • Slightly change the position of the smart phone on the charging pad. • Make sure the indicator light is orange. The indicator light will blink orange for 10 seconds if there is a malfunction in the wireless charging system. In this case, temporarily stop the charging process, and re-attempt to charge your cellular phone again. The system warns you with a message on the cluster display if the cellular phone is still on the wireless charging unit after the engine is turned OFF and the front door is opened. Information For some manufacturers’ cellular phones, the system may not warn you even though the cellular phone is left on the wireless charging unit. This is due to the particular characteristic of the cellular phone and not a malfunction of the wireless charging. 05 NOTICE • The wireless smart phone charging system may not support certain smart phones, which are not verified for the Qi specification ( ). • When placing your smart phone on the charging pad, position the phone in the middle of the mat for optimal charging performance. If your smart phone is off to the side, the charging rate may be less and in some cases the smart phone may experience higher heat conduction. • In some cases, the wireless charging may stop temporarily when the smart key is used, either when starting the vehicle or locking/ unlocking the doors, etc. • When charging certain smart phones, the charging indicator may not change to blue when the smart phone is fully charged. • The wireless charging process may temporarily stop, when temperature abnormally increases inside the wireless smart phone charging system. The wireless charging process restarts, when temperature falls to a certain level. • The wireless charging process may temporarily stop when there is any metallic item, such as a coin, between the wireless smart phone charging system and smart phone. • When charging some smart phones with a self-protection feature, the wireless charging speed may decrease and the wireless charging may stop. • If the smart phone has a thick cover, the wireless charging may not be possible. • If the smart phone is not completely contacting the charging pad, wireless charging may not operate properly. • If the ignition switch or Engine Start/ Stop button is in the OFF position, the charging also stops. • When any smart phone without a wireless charging function or a metallic object is placed on the charging pad, a small noise may sound. This small sound is due to the vehicle discerning compatibility of the object placed on the charging pad. It does not affect your vehicle or the smart phone in any way. • Some smart phones may not be able to charge depending on the internal structure of the smart phone. If this occurs, try charging the mobile phone by moving it to the left or right side of the wireless charging pad. However, for some foldable smart phones that have magnets inside the smart phone, try charging the smart phone while holding it close to the left side of the wireless charging pad. Information If the ignition switch is in the LOCK/OFF position, the charging also stops. Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 5-75 Convenience Features Clock Clothes Hanger WARNING Do not attempt to adjust the clock while driving. Doing so may result in distracted driving which may lead to an accident involving personal injury or death. Vehicles with Audio System Select the [SETUP] button on the audio system → Select [Date/Time]. • Set time: Set the time displayed on the audio screen. • Time format: Choose between 12hour and 24-hour time formats. OTM048095 These hangers are not designed to hold large or heavy items. WARNING Vehicles with Navigation System Select the Settings menu on the Navigation system → Select [Date/Time]. • GPS time: Displays time according to the received GNSS time. • 24-hour: Switches to 12 hour or 24 hour. OQX059137L Do not hang other objects such as hangers or hard objects except clothes. Also, do not put heavy, sharp or breakable objects in the clothes pockets. In an accident or when the curtain air bag is inflated, it may cause vehicle damage or personal injury. 5-76 05 Floor Mat Anchor(s) OQX059145N ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle. The anchors on the front floor carpet keep the floor mats from sliding forward. • Do not use ANY floor mat that cannot be firmly attached to the vehicle’s floor mat anchors. • Do not stack floor mats on top of one another (for example, all-weather rubber mat on top of a carpeted floor mat). Only a single floor mat should be installed in each position. IMPORTANT - Your vehicle was manufactured with driver’s side floor mat anchors that are designed to securely hold the floor mat in place. To avoid any interference with pedal operation, HYUNDAI recommends that the HYUNDAI floor mat designed for use in your vehicle be installed. Luggage Net Holder WARNING Do not overlay additional mats or liners over the floor mats. If using All Weather mats, remove the carpeted floor mats before installing them. Only use floor mats designed to connect to the anchors. WARNING The following must be observed when installing ANY floor mat to the vehicle. • Ensure to remove a protective film attached on the carpet before attaching a floor mat on the front floor carpet. Otherwise, the floor mat may move freely on the protective film and it could result in unintentional braking or accelerating. • Ensure that the floor mats are securely attached to the vehicle’s floor mat anchor(s) before driving the vehicle. OQX059045L To keep items from shifting in the luggage compartment, you can use the 4 holders located in the luggage board to attach the luggage net. Make sure the luggage net is securely attached to the holders in the luggage board. 5-77 Convenience Features WARNING WARNING Avoid eye injury. DO NOT overstretch the luggage net. ALWAYS keep your face and body out of the luggage net’s recoil path. DO NOT use the luggage net when the strap has visible signs of wear or damage. Use the luggage net to keep only light items from shifting in the luggage compartment. Cargo Area Cover • Do not place objects on the cargo area cover while driving. Such objects may be thrown about inside the vehicle and possibly injure vehicle occupants during an accident or when braking. • Never allow anyone to ride in the luggage compartment. It is designed for luggage only. • Maintain balance of the vehicle and locate the weight as far forward as possible. OQX059084L Use the cover to hide items stored in the cargo area. The cargo area cover will lift when the liftgate is opened. Disconnect the strap (1) from the holder if you want to return the cover to the original position. To remove the cargo area cover completely, pull the cover backward and out from the rail. To secure a wider space, pull the cargo area cover backward slightly and push down it. NOTICE Since the cargo area cover may be damaged or deformed, do not put luggage on it when it is being used. 5-78 OQX059153 • Fully insert the hinges (A) on both sides of the cargo area cover into position (B). If not fully inserted, the cargo area cover can be damaged. 05 EXTERIOR FEATURES Roof Side Rails (if equipped) WARNING • The following specification is the maximum weight that can be loaded onto the roof side rails. Distribute the load as evenly as possible onto the roof side rails and secure the load firmly. Loading cargo or luggage in excess of the specified weight limit on the roof side rails may damage your vehicle. OQXI049063 If your vehicle comes equipped with roof side rails, then roof side rails crossbars can be installed on top of your vehicle. The roof side rails crossbars are an accessory and are available at your local HYUNDAI dealer. NOTICE If the vehicle is equipped with a sunroof, be sure not to position cargo onto the roof side rails in such a way that it could interfere with sunroof operation. NOTICE • When carrying cargo on the roof side rails, take the necessary precautions to make sure the cargo does not damage the roof of the vehicle. • When carrying large objects on the roof side rails, make sure they do not exceed the overall roof length or width. ROOF SIDE RAILS 220 lbs. (100 kg) EVENLY DISTRIBUTED • The vehicle center of gravity will be higher when items are loaded onto the roof side rails. Avoid sudden starts, braking, sharp turns, abrupt maneuvers or high speeds that may result in loss of vehicle control or rollover resulting in an accident. • Always drive slowly and turn corners carefully when carrying items on the roof side rails. Severe wind updrafts, caused by passing vehicles or natural causes, can cause sudden upward pressure on items loaded on the roof side rails. This is especially true when carrying large, flat items such as wood panels or mattresses. This could cause the items to fall off the roof side rails and cause damage to your vehicle or others around you. • To prevent damage or loss of cargo while driving, check frequently before or while driving to make sure the items on the roof side rails are securely fastened. 5-79 Convenience Features INFOTAINMENT SYSTEM NOTICE Antenna • If you install an aftermarket HID head lamp, your vehicle’s audio and electronic devices may not function properly. • Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration. USB and IPod® Port OQXI049066 Micro-pole antenna transmits and receives signals such as AM/FM and GPS. Additional signals are sent and received according to vehicle options. CAUTION OQX052010N You can use an USB cable to connect audio devices to the vehicle USB port. Information When using a portable audio device connected to the power outlet, noise may occur during playback. If this happens, use the portable audio device’s power source. à iPod® is a trademark of Apple Inc. 5-80 • Be careful not to damage the antenna or bend the antenna pole before entering the vehicle, such as an automated parking lot or a space with a low ceiling or an automatic washing machine. Turn the antenna counterclockwise when removing the pole. Rotate it in a clockwise direction to reinstall it. • Be careful not to contact the antenna when loading cargo on the roof rack. Antenna reception performance may be impaired. • When other accessories are attached to the antenna pole, antenna reception may decrease, and the pole may bend. 05 Steering Wheel Audio Control SEEK/PRESET ( / ) (2) If the SEEK/PRESET switch is pressed up or down and held for 0.8 second or more, it will function in the following modes: • RADIO mode It will function as the AUTO SEEK select button. It will SEEK until you release the button. • MEDIA mode It will function as the FF/RW button. „ Type A OQXI049068L „ Type B If the SEEK/PRESET switch is pressed up or down, it will function in the following modes: • RADIO mode It will function as the PRESET STATION UP/DOWN button. • MEDIA mode It will function as the TRACK UP/ DOWN button. MODE ( OQXI049069L „ Type C ) (3) Press the MODE button to toggle through Radio, SXM, or Media. MUTE ( ) (4) • Press the MUTE button to mute the sound. • Press the MUTE button again to activate the sound. Custom ( ) (5) OQX052012N NOTICE Do not operate multiple audio remote control buttons simultaneously. VOLUME (VOL + / -) (1) • Press the VOLUME switch up to increase volume. • Press the VOLUME switch down to decrease volume. Press the Custom button to set frequently used features. Information The infotainment system may change after software updates. For more information, refer to the user’s manual provided in the infotainment system and the quick reference guide. 5-81 Convenience Features Bluetooth® Wireless Technology Hands-Free Audio (Display Audio) / Video / Navigation System (if equipped) Detailed information for the Infortainment system is described in the Vehicle Infotainment User’s Manual. OQXI049071 With the Bluetooth® Wireless Technology in the vehicle, you can use the phone wireless. (1) Call / Answer button (2) Call end button Detailed information for the Bluetooth® Wireless Technology hands-free is described in the Vehicle Infotainment User’s Manual. 5-82 6. While Driving Before Driving.................................................................................................... 6-4 Before Entering the Vehicle......................................................................................... 6-4 Before Starting............................................................................................................. 6-4 Ignition Switch................................................................................................... 6-5 Key Ignition Switch........................................................................................................6-5 Engine Start/Stop Button............................................................................................ 6-8 Intelligent Variable Transmission (IVT)............................................................ 6-12 Intelligent Variable Transmission (IVT) Operation..................................................... 6-12 Good Driving Practices............................................................................................... 6-16 Brake System..................................................................................................... 6-17 Power Brakes................................................................................................................6-17 Disc Brakes Wear Indicator.........................................................................................6-17 Rear Drum Brakes....................................................................................................... 6-18 Parking Brake............................................................................................................... 6-18 Anti-lock Brake System (ABS)..................................................................................... 6-19 Electronic Stability Control (ESC).............................................................................. 6-21 Vehicle Stability Management (VSM)........................................................................6-23 Hill-Start Assist Control (HAC)....................................................................................6-24 Good Braking Practices..............................................................................................6-24 Drive Mode Integrated Control System.......................................................... 6-25 Cluster Display Message.............................................................................................6-26 6 Special Driving Conditions.............................................................................. 6-28 Hazardous Driving Conditions...................................................................................6-28 Rocking the Vehicle....................................................................................................6-28 Smooth Cornering.......................................................................................................6-29 Driving at Night...........................................................................................................6-29 Driving in the Rain.......................................................................................................6-29 Driving in Flooded Areas.............................................................................................6-29 Highway Driving......................................................................................................... 6-30 Reducing the Risk of a Rollover................................................................................ 6-30 Winter Driving...................................................................................................6-31 Snow or Icy Conditions............................................................................................... 6-31 Winter Precautions......................................................................................................6-32 Vehicle Load Limit........................................................................................... 6-34 Tire Loading Information Label..................................................................................6-34 Trailer Towing................................................................................................... 6-38 6 06 WARNING Carbon monoxide (CO) gas is toxic. Breathing CO can cause unconsciousness and death. Engine exhaust contains carbon monoxide which cannot be seen or smelled. Do not inhale engine exhaust. If at any time you smell engine exhaust inside the vehicle, open the windows immediately. Exposure to CO can cause unconsciousness and death by asphyxiation. Be sure the exhaust system does not leak. The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the exhaust or if you drive over something that strikes the underneath side of the vehicle, have the exhaust system checked as soon as possible by an authorized HYUNDAI dealer. Do not run the engine in an enclosed area. Letting the engine idle in your garage, even with the garage door open, is a hazardous practice. Run the engine only long enough to start the engine and to move the vehicle out of the garage. Avoid idling the engine for prolonged periods with people inside the vehicle. If it is necessary to idle the engine for a prolonged period with people inside the vehicle, be sure to do so only in an open area with the air intake set at "Fresh" and fan control set to high so fresh air is drawn into the interior. Keep the air intakes clear. To assure proper operation of the ventilation system, keep the ventilation air intakes located in front of the windshield clear of snow, ice, leaves, or other obstructions. If you must drive with the liftgate open: Close all windows. Open instrument panel air vents. Set the air intake control at "Fresh", the air flow control at "Floor" or "Face", and the fan control set to high. WARNING CALIFORNIA PROPOSITION 65 WARNING Engine exhaust and a wide variety of automobile components including components found in the interior furnishings in a vehicle, contain or emit harmful chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 6-3 While Driving BEFORE DRIVING Before Entering the Vehicle • Be sure all windows, outside mirror(s), and outside lights are clean and unobstructed. • Remove frost, snow, or ice. • Visually check the tires for uneven wear and damage. • Check under the vehicle for any sign of leaks. • Be sure there are no obstacles behind you if you intend to back up. Before Starting • Make sure the hood, the liftgate, and the doors are securely closed and locked. • Adjust the position of the seat and steering wheel. • Adjust the inside and outside rearview mirrors. • Verify all the lights work. • Fasten your seatbelt. Check that all passengers have fastened their seatbelts. • Check the gauges and indicators in the instrument panel and the messages on the instrument display when the ignition switch is in the ON position. • Check that any items you are carrying are stored properly or fastened down securely. 6-4 WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: • ALWAYS wear your seat belt. All passengers must be properly belted whenever the vehicle is moving. For more information, refer to "Seat Belts" in chapter 3. • Always drive defensively. Assume other drivers or pedestrians may be careless and make mistakes. • Stay focused on the task of driving. Driver distraction can cause accidents. • Leave plenty of space between you and the vehicle in front of you. WARNING NEVER drink alcohol or take drugs and drive. Drinking alcohol or taking drugs and driving is dangerous and may result in an accident and SERIOUS INJURY or DEATH. Drunk driving is the number one contributor to the highway death toll each year. Even a small amount of alcohol will affect your reflexes, perceptions and judgment. Just one drink can reduce your ability to respond to changing conditions and emergencies and your reaction time gets worse with each additional drink. Driving while under the influence of drugs is as dangerous as or more dangerous than driving under the influence of alcohol. You are much more likely to have a serious accident if you drink or take drugs and drive. If you are drinking or taking drugs, don't drive. Do not ride with a driver who has been drinking or taking drugs. Choose a designated driver or call a taxi. 06 IGNITION SWITCH Key Ignition Switch (if equipped) WARNING To reduce the risk of SERIOUS INJURY or DEATH, take the following precautions: • NEVER allow children or any person who is unfamiliar with the vehicle to touch the ignition switch or related parts. Unexpected and sudden vehicle movement can occur. • NEVER reach through the steering wheel for the ignition switch, or any other control, while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident. WARNING NEVER turn the ignition switch to the LOCK or ACC position while the vehicle is in motion except in an emergency. This will result in the engine turning off and loss of power assist for the steering and brake systems. This may lead to loss of directional control and braking function, which could cause an accident. Before leaving the driver's seat, always make sure the shift lever is in P (Park, for intelligent variable transmission vehicle) position, apply the parking brake, and turn ignition switch to the LOCK position. Unexpected vehicle movement may occur if these precautions are not followed. OIB054010 6-5 While Driving Key Ignition Switch Positions Switch Position Action LOCK To turn the ignition switch to the LOCK position, put the key in at the ACC position and turn the key towards the LOCK position. The ignition key can be removed in the LOCK position. (The shift lever must be in the P (Park) position for intelligent variable transmission) ACC Electrical accessories are usable. The steering wheel unlocks. ON This is the normal key position when the engine has started. All features and accessories are usable. The warning lights can be checked when you turn the ignition switch from ACC to ON. Do not leave the ignition switch in the ON position when the engine is not running in order to prevent the battery from discharging. START To start the engine, turn the ignition switch to the START position. The switch returns to the ON position when you let go of the key. The engine will crank until you release the key. 6-6 Notice 06 Starting the Engine WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flip-flops, etc., may interfere with your ability to use the brake and accelerator pedals. Vehicle with intelligent variable transmission: 1. Make sure the parking brake is applied. 2. Make sure the shift lever is in P (Park). 3. Depress the brake pedal. 4. Turn the ignition switch to the START position. Hold the key (maximum of 10 seconds) until the engine starts and release it. Information • It is best to maintain a moderate engine speed until the vehicle engine comes up to normal operating temperature. Avoid harsh or abrupt acceleration or deceleration while the engine is still cold. • Whether the engine is cold or warm, always start the vehicle with your foot on the brake pedal. Do not depress the accelerator while starting the vehicle. Do not rev the engine while warming it up. NOTICE To prevent damage to the vehicle: • Do not hold the ignition key in the START position for more than 10 seconds. Wait 5 to 10 seconds before trying again. • Do not push or tow your vehicle to start the engine. 6-7 While Driving Engine Start/Stop Button (if equipped) OQX069064L Whenever the front door is opened, the Engine Start/Stop button will illuminate and will go off 30 seconds after the door is closed. WARNING To reduce risk of serious injury or death, NEVER allow children or any person who is unfamiliar with the vehicle to touch the Engine Start/Stop button or related parts. Unexpected and sudden vehicle movement can occur. WARNING To turn the engine off in an emergency: Press and hold the Engine Start/Stop button for more than two seconds OR rapidly press and release the Engine Start/Stop button three times (within three seconds). If the vehicle is still moving, you can restart the engine without depressing the brake pedal by pressing the Engine Start/Stop button with the shift lever in the N (Neutral) position. 6-8 WARNING • NEVER press the Engine Start/Stop button while the vehicle is in motion except in an emergency. This will result in the engine turning off and loss of power assist for the steering and brake systems. This may lead to loss of directional control and braking function, which could cause an accident. • Before leaving the driver's seat, always make sure the shift lever is in the P (Park) position, set the parking brake, press the Engine Start/Stop button to the OFF position, and take the Smart Key with you. Unexpected vehicle movement may occur if these precautions are not followed. • NEVER reach through the steering wheel for the Engine Start/Stop button or any other control while the vehicle is in motion. The presence of your hand or arm in this area may cause a loss of vehicle control resulting in an accident. 06 Engine Stop/Start Button Positions Button Position Action OFF To turn off the engine, press the Engine Start/Stop button with the vehicle shifted to P (Park). Note if the Engine Start/Stop button is pressed with the vehicle shifted to D (Drive) or R (Reverse), the gear will automatically shift to P (Park). If the Engine Start/Stop button is pressed with the gear shifted to N (Neutral), the Engine Start/ Stop button will change to the ACC position. ACC Press the Engine Start/Stop button when the button is in the OFF position without depressing the brake pedal. Electrical accessories are usable. If you leave the Engine Start/Stop button in the ACC position for more than one hour, the battery power will turn off automatically to prevent the battery from discharging. ON Press the Engine Start/Stop button while it is in the ACC position without depressing the brake pedal. The warning lights can be checked before the engine is started. Do not leave the Engine Start/Stop button in the ON position when the engine is not running to prevent the battery from discharging. To start the engine, depress the brake pedal and press the Engine Start/Stop button with the gear shifted to the P (Park) or the N (Neutral) position. For your safety, start the engine with the gear shifted to the P (Park) position. If you press the Engine Start/Stop button without depressing the brake pedal, the engine does not start and the Engine Start/Stop button changes as follows: OFF → ACC → ON → OFF or ACC However, the engine may start if you depress the brake pedal within 0.5 second after pressing the Engine Start/Stop button from the OFF position. START Notice 6-9 While Driving Starting the Engine WARNING • Always wear appropriate shoes when operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flip-flops, etc., may interfere with your ability to use the brake and accelerator pedals. • Do not start the vehicle with the accelerator pedal depressed. The vehicle can move and lead to an accident. • Wait until the engine rpm is normal. The vehicle may suddenly move if the brake pedal is released when the rpm is high. Information • The engine will start by pressing the Engine Start/Stop button, only when the smart key is in the vehicle. • Even if the smart key is in the vehicle, if it is far away from the driver, the engine may not start. • When the Engine Start/Stop button is in the ACC or ON position, if any door is open, the system checks for the smart key. If the smart key is not in the ” indicator will blink vehicle, the “ and the warning "Key not in vehicle" will come on and if all doors are closed, the chime will also sound for about 5 seconds. Keep the smart key in the vehicle when using the ACC position or if the vehicle engine is ON. 6-10 Vehicle with intelligent variable transmission: 1. Always carry the smart key with you. 2. Make sure the parking brake is applied. 3. Make sure the shift lever is in P (Park). 4. Depress the brake pedal. 5. Press the Engine Start/Stop button. Information • Do not wait for the engine to warm up while the vehicle remains stationary. Start driving at moderate engine speeds. (Aggressive accelerating and decelerating should be avoided.) • Always start the vehicle with your foot on the brake pedal. Do not depress the accelerator while starting the vehicle. Do not rev the engine while warming it up. NOTICE To prevent damage to the vehicle: • If the engine stalls while you are in motion, do not attempt to move the shift lever to the P (Park) position. If traffic and road conditions permit, you may put the shift lever in the N (Neutral) position while the vehicle is still moving and press the Engine Start/Stop button in an attempt to restart the engine. • Do not push or tow your vehicle to start the engine. 06 NOTICE To prevent damage to the vehicle: When the stop lamp switch fuse is blown, you can't start the engine normally. Replace the fuse with a new one. If you are not able to replace the fuse, you can start the engine by pressing and holding the Engine Start/ Stop button for 10 seconds with the Engine Start/Stop button in the ACC position. Do not press the Engine Start/Stop button for more than 10 seconds except when the stop lamp switch fuse is blown. For your safety always depress the brake pedal before starting the engine. OQX069067 Information If the smart key battery is weak or the smart key does not work correctly, you can start the engine by pressing the Engine Start/Stop button with the smart key in the direction of the picture above. 6-11 While Driving INTELLIGENT VARIABLE TRANSMISSION (IVT) (IF EQUIPPED) Shift lever Manual shift mode OQX069001L Press the shift button, then move shift lever. Depress the brake pedal, press the shift button, and then move shift lever. Move shift lever. Intelligent Variable Transmission (IVT) Operation The Intelligent Variable Transmission (IVT) automatically shifts depending on speed, accelerate pedal position. The individual speeds are selected automatically, depending on the position of the shift lever. 6-12 06 WARNING To reduce the risk of serious injury or death: • ALWAYS check the surrounding areas near your vehicle for people, especially children, before shifting a vehicle into D (Drive) or R (Reverse). • Before leaving the driver's seat, always make sure the shift lever is in the P (Park) position, then set the parking brake, and place the ignition switch in the LOCK/OFF position. Unexpected and sudden vehicle movement can occur if these precautions are not followed. • When using Manual Shift Mode, do not use aggressive engine braking (shifting from a higher gear to a lower gear) on slippery roads. This could cause the tires to slip and may result in an accident. Transmission Ranges The indicator in the instrument cluster displays the shift lever position when the ignition switch is in the ON position. P (Park) Always come to a complete stop before shifting into P (Park). To shift from P (Park), you must depress firmly on the brake pedal and make sure your foot is off the accelerator pedal. If you have done all of the above and still cannot shift the lever out of P (Park), see "Shift-Lock Release" in this section. The shift lever must be in P (Park) before turning the engine off. WARNING • Shifting into P (Park) while the vehicle is in motion may cause you to lose control of the vehicle. • Do not use the P (Park) position in place of the parking brake. Always make sure the shift lever is latched in the P (Park) position and set the parking brake fully. • Never leave a child unattended in a vehicle. R (Reverse) Use this position to drive the vehicle backward. NOTICE Always come to a complete stop before shifting into or out of R (Reverse); you may damage the transmission if you shift into R (Reverse) while the vehicle is in motion. N (Neutral) The wheels and transmission are not engaged. Use N (Neutral) if you need to restart a stalled engine. Shift into P (Park) if you need to leave your vehicle for any reason. Always depress the brake pedal when you are shifting from N (Neutral) to another gear. WARNING Do not shift into gear unless your foot is firmly on the brake pedal. Shifting into gear when the engine is running at high speed can cause the vehicle to move very rapidly. You could lose control of the vehicle and hit people or objects. 6-13 While Driving D (Drive) This is the normal driving position. The transmission will automatically shift, providing the best fuel economy and power. For extra power when passing another vehicle or driving uphill depress the accelerator pedal further until you feel the transmission downshift to a lower gear. The DRIVE MODE switch, located on the shift lever console, allows the driver to switch from NORMAL mode to SPORT mode. For more details, refer to "Drive Mode Integrated Control System" later in this chapter. (UP) (DOWN) OQX069002L Manual shift mode Whether the vehicle is stationary or in motion, manual shift mode is selected by pushing the shift lever from the D (Drive) position into the manual gate. To return to D (Drive) range operation, push the shift lever back into the main gate. In manual shift mode, moving the shift lever backwards and forwards will allow you to select the desired range of gears for the current driving conditions. + (Up): Push the lever forward once to shift up one gear. - (Down): Pull the lever backwards once to shift down one gear. 6-14 Information • Only the eight forward gears can be selected. To reverse or park the vehicle, move the shift lever to the R (Reverse) or P (Park) position as required. • Downshifts are made automatically when the vehicle slows down. When the vehicle stops, 1st gear is automatically selected. • When the engine rpm approaches the red zone the transmission will upshift automatically. • If the driver presses the lever to + (Up) or - (Down) position, the transmission may not make the requested gear change if the next gear is outside of the allowable engine rpm range. The driver must execute upshifts in accordance with road conditions, taking care to keep the engine rpms below the red zone. • When accelerating from a stop on a slippery road, push the shift lever forward into the + (Up) position. This allows the transmission to shift into the 2nd gear which is better for smooth driving on a slippery road. Push the shift lever to the - (Down) side to shift back to the 1st gear. • When driving in Manual Shift Mode, slow down before shifting to a lower gear. Otherwise, the lower gear may not be engaged if the engine rpms are outside of the allowable range. 06 Shift-lock System For your safety, the Intelligent Variable Transmission (IVT) has a shift-lock system which prevents shifting the transmission from P (Park) into R (Reverse) unless the brake pedal is depressed. To shift the transmission from P (Park) into R (Reverse): 1. Depress and hold the brake pedal. 2. Start the engine or place the ignition switch in the ON position. 3. Move the shift lever. Shift-lock Release 6. Remove the tool from the shift-lock override access hole then install the cap. If you need to use the shift-lock release, have your vehicle inspected by an authorized HYUNDAI dealer immediately. Parking Always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, apply the parking brake, and place the ignition switch in the LOCK/ OFF position. Take the Key with you when exiting the vehicle. WARNING OQX062004N If the shift lever cannot be moved from the P (Park) position into R (Reverse) position with the brake pedal depressed, continue depressing the brake, and then do the following: 1. Place the ignition switch in the LOCK/ OFF position. 2. Apply the parking brake. 3. Carefully remove the cap (1) covering the shift-lock release access hole. 4. Insert a tool (for example, flathead screwdriver) into the access hole and press down on the tool (2). 5. Move the shift lever. • When you stay in the vehicle with the engine running, be careful not to depress the accelerator pedal for a long period of time. The engine or exhaust system may overheat and start a fire. • The exhaust gas and the exhaust system are very hot. Keep away from the exhaust system components. • Do not stop or park over flammable materials, such as dry grass, paper or leaves. They may ignite and cause a fire. 6-15 While Driving Good Driving Practices • Never move the shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. • Never move the shift lever into P (Park) when the vehicle is in motion. Be sure the vehicle is completely stopped before you attempt to shift into R (Reverse) or D (Drive). • Do not move the shift lever to N (Neutral) when driving. Doing so may result in an accident because of a loss of engine braking. • When driving uphill or downhill, always shift to D (Drive) for driving forward or shift to R (Reverse) for driving rearwards. After selecting D (Drive) or R (Reverse), check the gear position indicated on the cluster before driving. If the vehicle moves in the opposite direction of the selected gear, the engine may turn off and a serious accident might occur due to degraded brake performance. • Do not drive with your foot resting on the brake pedal. Even light, but consistent pedal pressure can result in the brakes overheating, brake wear and possibly even brake failure. • Do not hold the vehicle on the incline with the accelerator pedal. This can cause the transmission to overheat. Always use the brake pedal or parking brake. • Depressing both accelerator and brake pedals at the same time can trigger logic for engine power reduction to assure vehicle deceleration. Vehicle acceleration will resume after the brake pedal is released. • Always apply the parking brake when leaving the vehicle. Do not depend on placing the transmission in P (Park) to keep the vehicle from moving. 6-16 • Exercise extreme caution when driving on a slippery surface. Be especially careful when braking, accelerating or shifting gears. On a slippery surface, an abrupt change in vehicle speed can cause the drive wheels to lose traction and may cause loss of vehicle control resulting in an accident. • Optimum vehicle performance and economy is obtained by smoothly depressing and releasing the accelerator. WARNING To reduce the risk of SERIOUS INJURY or DEATH: • ALWAYS wear your seat belt. In a collision, an unbelted occupant is significantly more likely to be seriously injured or killed than a properly belted occupant. • Avoid high speeds when cornering or turning. • Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns. • The risk of rollover is greatly increased if you lose control of your vehicle at highway speeds. • Loss of control often occurs if two or more wheels drop off the roadway and the driver over steers to reenter the roadway. • In the event your vehicle leaves the roadway, do not steer sharply. Instead, slow down before pulling back into the travel lanes. • HYUNDAI recommends you follow all posted speed limits. 06 BRAKE SYSTEM Power Brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the engine is not running or is turned off while driving, the power assist for the brakes will not work. You can still stop your vehicle by applying greater force to the brake pedal than typical. The stopping distance, however, will be longer than with power brakes. When the engine is not running, the reserve brake power is partially depleted each time the brake pedal is applied. Do not pump the brake pedal when the power assist has been interrupted. Only pump the brakes on slippery surfaces if the power assist has been interrupted to maintain steering control. Do not pump the brakes on slippery surfaces if the brakes are operating normally. Information • When the brake pedal is depressed under certain driving conditions or weather conditions, you may temporarily hear a noise. This is normal and does not indicate a problem with your brakes. • While driving on a road with deicing chemicals, brake noise or abnormal tire wear may occur due to deicing chemicals. In a safe traffic condition, additionally apply the brakes to remove deicing chemicals on the brake discs and pads. WARNING Take the following precautions: • Do not drive with your foot resting on the brake pedal. This will create abnormal high brake temperatures, excessive brake lining and pad wear, and increased stopping distances. • When descending down a long or steep hill, move the gear shift lever to Manual Shift Mode and manually downshift to a lower gear in order to control your speed without using the brake pedal excessively. Applying the brakes continuously will cause the brakes to overheat and could result in a temporary loss of braking performance. • Wet brakes may impair the vehicle's ability to safely slow down; the vehicle may also pull to one side when the brakes are applied. Applying the brakes lightly will indicate whether they have been affected in this way. Always test your brakes in this fashion after driving through deep water. To dry the brakes, lightly tap the brake pedal to heat up the brakes while maintaining a safe forward speed until brake performance returns to normal. Avoid driving at high speeds until the brakes function correctly. Disc Brakes Wear Indicator When your brake pads are worn and new pads are required, you will hear a high pitched warning sound from your front or rear brakes. You may hear this sound come and go or it may occur whenever you depress the brake pedal. NOTICE To avoid costly brake repairs, do not continue to drive with worn brake pads. Information Always replace brake pads as complete front or rear axle sets. 6-17 While Driving Rear Drum Brakes (if equipped) Your rear drum brakes do not have wear indicators. Therefore, have the rear brake linings inspected if you hear a rear brake rubbing noise. Also have your rear brakes inspected each time you change or rotate your tires and when you have the front brakes replaced. Parking Brake OQX069006L To release: Firmly depress the brake pedal. While pressing the release button (1), slightly pull up on the parking brake lever then lower the parking brake lever (2). If the parking brake does not release or does not release all the way, have your vehicle checked by an authorized HYUNDAI dealer. OQX069005L Always set the parking brake before leaving the vehicle. To apply the parking brake: Firmly depress the brake pedal. Pull up the parking brake lever as far as possible. WARNING To reduce the risk of SERIOUS INJURY or DEATH, do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the brake system and lead to an accident. 6-18 WARNING • Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Move the shift lever into P (Park) position, then apply the parking brake, and place the ignition switch in the LOCK/OFF position. Vehicles with the parking brake not fully engaged are at risk for moving inadvertently and causing injury to yourself or others. • When parking on an incline, block the wheels to prevent the vehicle from rolling down. • NEVER allow anyone who is unfamiliar with the vehicle to touch the parking brake. If the parking brake is released unintentionally, serious injury may occur. • Only release the parking brake when you are seated inside the vehicle with your foot firmly on the brake pedal. 06 NOTICE • Do not apply the accelerator pedal while the parking brake is engaged. If you depress the accelerator pedal with the parking brake engaged, a warning will sound. Damage to the parking brake may occur. • Driving with the parking brake on can overheat the braking system and cause premature wear or damage to brake parts. Make sure the parking brake is released and the Brake Warning Light is off before driving. Check the Parking Brake Warning Light by placing the ignition switch to the ON position (do not start the engine). This light will be illuminated when the parking brake is applied with the ignition switch in the START or ON position. Before driving, be sure the parking brake is released and the Brake Warning Light is OFF. If the Parking Brake Warning Light remains on after the parking brake is released while engine is running, there may be a malfunction in the brake system. Immediate attention is necessary. If at all possible, cease driving the vehicle immediately. If that is not possible, use extreme caution while operating the vehicle and only continue to drive the vehicle until you can reach a safe location. Anti-lock Brake System (ABS) WARNING An Anti-Lock Braking System (ABS) or an Electronic Stability Control (ESC) system will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance between you and objects ahead of you. Vehicle speeds should always be reduced during extreme road conditions. The braking distance for cars equipped with ABS or ESC may be longer than for those without these systems in the following road conditions. Drive your vehicle at reduced speeds during the following conditions: • Rough, gravel or snow-covered roads. • On roads where the road surface is pitted or has different surface height. • Tire chains are installed on your vehicle. The safety features of an ABS or ESC equipped vehicle should not be tested by high speed driving or cornering. This could endanger the safety of yourself or others. ABS is an electronic braking system that helps prevent a braking skid. ABS allows the driver to steer and brake at the same time. 6-19 While Driving Using ABS To obtain the maximum benefit from your ABS in an emergency situation, do not attempt to modulate your brake pressure and do not try to pump your brakes. Depress your brake pedal as hard as possible. When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your ABS is active. ABS does not reduce the time or distance it takes to stop the vehicle. Always maintain a safe distance from the vehicle in front of you. ABS will not prevent a skid that results from sudden changes in direction, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe speed for the road and weather conditions. ABS cannot prevent a loss of stability. Always steer moderately when braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road. On loose or uneven road surfaces, operation of the anti-lock brake system may result in a longer stopping distance than for vehicles equipped with a conventional brake system. The ABS warning light ( ) will stay on for several seconds after the ignition switch is in the ON position. During that time, the ABS will go through selfdiagnosis and the light will go off if everything is normal. If the light stays on, you may have a problem with your ABS. Contact an authorized HYUNDAI dealer as soon as possible. 6-20 WARNING If the ABS warning light ( ) is on and stays on, you may have a problem with the ABS. Your power brakes will work normally. To reduce the risk of serious injury or death, contact your HYUNDAI dealer as soon as possible. CAUTION When you drive on a road having poor traction, such as an icy road, and apply your brakes continuously, the ABS will be active continuously and the ABS warning light ( ) may illuminate. Pull your car over to a safe place and turn the engine off. Restart the engine. If the ABS warning light is off, then your ABS system is normal. Otherwise, you may have a problem with your ABS system. Contact an authorized HYUNDAI dealer as soon as possible. Information When you jump start your vehicle because of a drained battery, the ABS warning light ( ) may turn on at the same time. This happens because of the low battery voltage. It does not mean your ABS is malfunctioning. Have the battery recharged before driving the vehicle. 06 Electronic Stability Control (ESC) ESC Operation ESC ON condition When the ignition switch is in the ON position, the ESC and the ESC OFF indicator lights illuminate for approximately three seconds. After both lights go off, the ESC is enabled. When operating When the ESC is in operation, the ESC indicator light blinks: OQX059026L The Electronic Stability Control (ESC) system helps to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applies braking pressure to any one of the vehicle's brakes and intervenes in the engine management system to assist the driver with keeping the vehicle on the intended path. It is not a substitute for safe driving practices. Always adjust your speed and driving to the road conditions. WARNING Never drive too fast for the road conditions or too quickly when cornering. The ESC system will not prevent accidents. Excessive speed in turns, abrupt maneuvers, and hydroplaning on wet surfaces can result in severe accidents. • When you apply your brakes under conditions which may lock the wheels, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your ESC is active. • When the ESC activates, the engine may not respond to the accelerator as it does under routine conditions. • If the Cruise Control was in use when the ESC activates, the Cruise Control automatically disengages. The Cruise Control can be reengaged when the road conditions allow. See "Cruise Control System" later in this chapter. (if equipped) • When moving out of the mud or driving on a slippery road, the engine RPM (revolutions per minute) may not increase even if you press the accelerator pedal deeply. This is to maintain the stability and traction of the vehicle and does not indicate a problem. 6-21 While Driving ESC OFF condition To cancel ESC operation: • State 1 Press the ESC OFF button briefly. The ESC OFF indicator light and message "Traction Control disabled" will illuminate. In this state, the traction control function of ESC (engine management) is disabled, but the brake control function of ESC (braking management) still operates. • State 2 Press and hold the ESC OFF button continuously for more than 3 seconds. The ESC OFF indicator light and message "Traction and Stability Control disabled" illuminates and a warning chime sounds. In this state, both the traction control function of ESC (engine management) and the brake control function of ESC (braking management) are disabled. If the ignition switch is placed to the LOCK/OFF position when ESC is off, ESC remains off. Upon restarting the engine, the ESC will automatically turn on again. Indicator Lights ■ ESC indicator light (blinks) ■ ESC OFF indicator light (comes on) When the ignition switch is placed to the ON position, the ESC indicator light illuminates, then goes off if the ESC system is operating normally. The ESC indicator light blinks whenever the ESC is operating. If ESC indicator light stays on, your vehicle may have a malfunction with the ESC system. When this warning light illuminates have your vehicle checked by an authorized HYUNDAI dealer as soon as possible. The ESC OFF indicator light comes on when the ESC is turned off. WARNING When the ESC is blinking, this indicates the ESC is active: Drive slowly and NEVER attempt to accelerate. NEVER turn the ESC off while the ESC indicator light is blinking or you may lose control of the vehicle resulting in an accident. NOTICE Driving with wheels and tires with different sizes may cause the ESC system to malfunction. Before replacing tires, make sure all four tires and wheels are the same size. Never drive the vehicle with different sized wheels and tires installed. 6-22 06 ESC OFF Usage When Driving The ESC OFF mode should only be used briefly to help free the vehicle if stuck in snow by temporarily stopping operation of the ESC to maintain wheel torque. To turn ESC off while driving, press the ESC OFF button while driving on a flat road surface. NOTICE To prevent damage to the transmission: • Do not allow wheel(s) of one axle to spin excessively while the ESC, ABS, and parking brake warning lights are displayed. The repairs would not be covered by the vehicle warranty. Reduce engine power and do not spin the wheel(s) excessively while these lights are displayed. • When operating the vehicle on a dynamometer, make sure the ESC is turned off (ESC OFF light illuminated). Information Turning the ESC off does not affect ABS or standard brake system operation. Vehicle Stability Management (VSM) The Vehicle Stability Management (VSM) is a function of the Electronic Stability Control (ESC) system. It helps ensure the vehicle stays stable when accelerating or braking suddenly on wet, slippery and rough roads where traction over the four tires can suddenly become uneven. WARNING Take the following precautions when using the Vehicle Stability Management (VSM): • ALWAYS check the speed and the distance to the vehicle ahead. The VSM is not a substitute for safe driving practices. • Never drive too fast for the road conditions. The VSM system will not prevent accidents. Excessive speed in bad weather, slippery and uneven roads can result in severe accidents. VSM Operation VSM ON condition The VSM operates when: • The Electronic Stability Control (ESC) is on. • Vehicle speed is approximately above 9 mph (15 km/h) on curve roads. • Vehicle speed is approximately above 12 mph (20 km/h) when the vehicle is braking on rough roads. When operating When you apply your brakes under conditions which may activate the ESC, you may hear sounds from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and it means your VSM is active. NOTICE The VSM does not operate when: • Driving on a banked road such as gradient or incline. • Driving rearward. • ESC OFF indicator light is on. • MDPS (Motor Driven Power Steering) warning light ( ) is on or blinks. 6-23 While Driving WARNING If ESC indicator light ( ) or MDPS warning light ( ) stays on or blinks, your vehicle may have a malfunction with the VSM system. When the warning light illuminates, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible. Driving with wheels and tires with different sizes may cause the ESC system to malfunction. Before replacing tires, make sure all four tires and wheels are the same size. Never drive the vehicle with different sized tires and wheels installed. Hill-Start Assist Control (HAC) The Hill-Start Assist Control (HAC) helps prevent the vehicle from rolling backwards when starting a vehicle from a stop on a hill. The system operates the brakes automatically for approximately 2 seconds and releases the brake after 2 seconds or when the accelerator pedal is depressed. WARNING Always be ready to depress the accelerator pedal when starting off on a incline. The HAC activates only for approximately 2 seconds. NOTICE • The HAC does not operate when the shift lever is in P (Park) or N (Neutral) • The HAC activates even though the ESC (Electronic Stability Control) is off but does not activate when the ESC has malfunctioned. 6-24 Good Braking Practices WARNING Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Move the shift lever into P (Park) position, then apply the parking brake, and place the ignition switch in the LOCK/OFF position. Vehicles parked with the parking brake not applied or not fully engaged may roll inadvertently and may cause injury to the driver and others. ALWAYS apply the parking brake before exiting the vehicle. Wet brakes can be dangerous! The brakes may get wet if the vehicle is driven through standing water or if it is washed. Your vehicle will not stop as quickly if the brakes are wet. Wet brakes may cause the vehicle to pull to one side. To dry the brakes, apply the brakes lightly until the braking action returns to normal, taking care to keep the vehicle under control at all times. If the braking action does not return to normal, stop as soon as it is safe to do so and call an authorized HYUNDAI dealer for assistance. DO NOT drive with your foot resting on the brake pedal. Even light, but constant pedal pressure can result in the brakes overheating, brake wear, and possibly even brake failure. If a tire goes flat while you are driving, apply the brakes gently and keep the vehicle pointed straight ahead while you slow down. When you are moving slowly enough for it to be safe to do so, pull off the road and stop in a safe location. Keep your foot firmly on the brake pedal when the vehicle is stopped to prevent the vehicle from rolling forward. 06 DRIVE MODE INTEGRATED CONTROL SYSTEM (IF EQUIPPED) NORMAL Mode In NORMAL mode the engine and transmission control logic work together to provide regular daily driving performance with some fuel efficiency. • When NORMAL mode is selected, it is not displayed on the instrument cluster. SPORT Mode OQX062079N The drive mode may be selected according to the driver's preference or road condition. The system resets to be in the NORMAL mode, when the engine is restarted. Information If there is a problem with the instrument cluster, the drive mode will be in NORMAL mode and may not change to SPORT mode. The mode changes, as below, whenever the DRIVE MODE button is pressed. NORMAL SPORT SNOW SPORT mode manages the driving dynamics by automatically adjusting the steering effort, and the engine and transmission control logic for enhanced driving performance. • When SPORT mode is selected by pressing the DRIVE MODE button, the SPORT indicator will illuminate. • Whenever the engine is restarted, the Drive Mode will revert back to NORMAL mode. If SPORT mode is desired, re-select SPORT mode from the DRIVE MODE button. • When SPORT mode is activated: - The engine rpm will tend to remain a little higher for a brief time even after releasing the accelerator. This is a typical when the SPORT mode is activated. - Upshifts are delayed when accelerating Information In SPORT mode, the fuel efficiency may decrease. 6-25 While Driving SNOW Mode SNOW mode offers special traction tuning for snow optimizing available traction in adverse conditions. Snow mode adjusts left and right wheel slip control, engine torque and shift patterns according to available traction levels. Cluster Display Message Transmission Hot! Park with Engine On WARNING Snow mode is designed base on 2WD (2 Wheel Drive), Do not drive in condition that exceed the vehicles intended design. Invalid mode selection can lead to loss of traction and skidding, particularly on slippery roads, this can cause you to lose control of the vehicle, which can lead to accidents and serious injuries. OJS058137L OJS058138L 6-26 06 • Under certain conditions, such as harsh driving conditions (mud or sand road), the transmission temperatures will increase excessively. Finally the transmission could be overheated. • If the vehicle continues to be driven and the transmission temperatures reach the maximum temperature limit, the "Transmission hot! Park with engine On" warning will be displayed. When this occurs the transmission is disabled until the transmission cools to normal temperatures. • The warning will display a time to wait for the transmission to cool. • If this occurs, pull over to a safe location, stop the vehicle with the engine running, apply the brakes and shift the vehicle to P (Park), and allow the transmission to cool. • When the message "Transmission cooled down. Resume driving" appears you can continue to drive your vehicle. • When possible, drive the vehicle smoothly. 6-27 While Driving SPECIAL DRIVING CONDITIONS Hazardous Driving Conditions When hazardous driving elements are encountered such as water, snow, ice, mud and sand, take the below suggestions: • Drive cautiously and keep a longer braking distance. • Avoid abrupt braking or steering. • When your vehicle is stuck in snow, mud, or sand, use second gear. Accelerate slowly to avoid unnecessary wheel spin. • Put sand, rock salt, tire chains or other non-slip materials under the wheels to provide additional traction while the vehicle becomes stuck in ice, snow, or mud. WARNING Downshifting with an intelligent variable transmission while driving on slippery surfaces can cause an accident. The sudden change in tire speed could cause the tires to skid. Be careful when downshifting on slippery surfaces. Rocking the Vehicle If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth between R (Reverse) and a forward gear. Try to avoid spinning the wheels, and do not race the engine. To prevent transmission wear, wait until the wheels stop spinning before shifting gears. Release the accelerator pedal while shifting, and press lightly on the accelerator pedal while the transmission is in gear. Slowly spinning the wheels in forward and reverse directions causes a rocking motion that may free the vehicle. 6-28 WARNING If the vehicle is stuck and excessive wheel spin occurs, the temperature of the tires can increase very quickly. If the tires become damaged, a tire blow out or tire explosion can occur. This condition is dangerous - you and others may be injured. Do not attempt this procedure if people or objects are anywhere near the vehicle. If you attempt to free the vehicle, the vehicle can overheat quickly, possibly causing an engine compartment fire or other damage. Try to avoid spinning the wheels as much as possible to prevent overheating of either the tires or the engine. DO NOT allow the vehicle to spin the wheels above 35 MPH (56 km/h). Information The ESC system must be turned OFF before rocking the vehicle. NOTICE If you are still stuck after rocking the vehicle a few times, have the vehicle pulled out by a tow vehicle to avoid engine overheating, possible damage to the transmission, and tire damage. See "Towing" in chapter 7. 06 Smooth Cornering Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. Driving at Night Night driving presents more hazards than driving in the daylight. Here are some important tips to remember: • Slow down and keep more distance between you and other vehicles, as it may be more difficult to see at night, especially in areas where there may not be any street lights. • Adjust your mirrors to reduce the glare from other driver's headlights. • Keep your headlights clean and properly aimed. Dirty or improperly aimed headlights will make it much more difficult to see at night. • Avoid staring directly at the headlights of oncoming vehicles. You could be temporarily blinded, and it will take several seconds for your eyes to readjust to the darkness. Driving in the Rain Rain and wet roads can make driving dangerous. Here are a few things to consider when driving in the rain or on slick pavement: • Slow down and allow extra following distance. A heavy rainfall makes it harder to see and increases the distance needed to stop your vehicle. • Turn OFF your Cruise Control. • Replace your windshield wiper blades when they show signs of streaking or missing areas on the windshield. • Tires should be properly maintained with at least 2/32nds of an inch of tread depth. If your tires do not have enough tread, making a quick stop on wet pavement can cause a skid and possibly lead to an accident. See "Tire Tread" in chapter 8. • Turn on your headlights to make it easier for others to see you. • Driving too fast through large puddles can affect your brakes. If you must go through puddles, try to drive through them slowly. • If you believe your brakes may be wet, apply them lightly while driving until normal braking operation returns. Hydroplaning If the road is wet enough and you are going fast enough, your vehicle may have little or no contact with the road surface and actually ride on the water. The best advice is SLOW DOWN when the road is wet. The risk of hydroplaning increases as the depth of tire tread decreases, refer to "Tire Tread" in chapter 8. Driving in Flooded Areas Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake performance may be reduced. After driving through water, dry the brakes by gently applying them several times while the vehicle is moving slowly. 6-29 While Driving Highway Driving Tires Adjust the tire inflation, as specified. Under-inflation may overheat or damage the tires. Do not install worn-out or damaged tires, which may reduce traction or adversely affect vehicle handling. This could lead to sudden tire failure that may cause loss of vehicle control resulting in an accident. Information Never over-inflate your tires above the maximum inflation pressure, as specified on your tires. Fuel, Engine Coolant and Engine Oil Driving at higher speeds on the highway consumes more fuel and is less efficient than driving at a slower, more moderate speed. Maintain a moderate speed in order to conserve fuel when driving on the highway. Be sure to check both the engine coolant level and the engine oil before driving. Drive Belt A loose or damaged drive belt may overheat the engine. 6-30 Reducing the Risk of a Rollover Your multi-purpose passenger vehicle is defined as a Sports Utility Vehicle (SUV). SUV's have higher ground clearance and a narrower track to make them capable of performing in a wide variety of off-road applications. The specific design characteristics give them a higher center of gravity than ordinary vehicles making them more likely to roll over if you make abrupt turns. Utility vehicles have a significantly higher rollover rate than other types of vehicles. Due to this risk, driver and passengers are strongly recommended to buckle their seat belts. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. There are steps that a driver can make to reduce the risk of a rollover. If at all possible, avoid sharp turns or abrupt maneuvers, do not load your vehicle with heavy cargo on the roof, and never modify your vehicle in any way. WARNING Utility vehicles have a significantly higher rollover rate than other types of vehicles. To prevent rollovers or loss of control: • Take corners at slower speeds than you would with a passenger vehicle. • Avoid sharp turns and abrupt maneuvers. • Do not modify your vehicle in any way that you would raise the center of gravity. • Keep tires properly inflated. • Do not carry heavy cargo on the roof. 06 WINTER DRIVING The severe weather conditions of winter quickly wear out tires and cause other problems. To minimize winter driving problems, you should take the following suggestions: Snow or Icy Conditions You need to keep sufficient distance between your vehicle and the vehicle in front of you. Apply the brakes gently. Speeding, rapid acceleration, sudden brake applications, and sharp turns are potentially very hazardous practices. During deceleration, use engine braking to the fullest extent. Sudden brake applications on snowy or icy roads may cause the vehicle to skid. To drive your vehicle in deep snow, it may be necessary to use snow tires or to install tire chains on your tires. Always carry emergency equipment. Some of the items you may want to carry include tire chains, tow straps or chains, a flashlight, emergency flares, sand, a shovel, jumper cables, a window scraper, gloves, ground cloth, coveralls, a blanket, etc. Snow Tires WARNING Snow tires should be equivalent in size and type to the vehicle’s standard tires. Otherwise, the safety and handling of your vehicle may be adversely affected. Information Do not install studded tires without first checking local, state and municipal regulations for possible restrictions against their use. Tire Chains OQX079023 Since the sidewalls of radial tires are thinner than other types of tires, they may be damaged by mounting some types of tire chains on them. Therefore the use of snow tires is preferred over the use of tire chains. If the road and weather conditions require the use of tire chains, be sure to use tire chains that have been properly selected for the size of tire on your HYUNDAI vehicle. Be sure to follow the guidelines and installation instructions provided from the tire chain manufacturer. Damage to your vehicle caused by improper tire chain use is not covered by your vehicle manufacturer’s warranty. If you mount snow tires on your vehicle, make sure to use radial tires of the same size and load range as the original tires. Mount snow tires on all four wheels to balance your vehicle’s handling in all weather conditions. The traction provided by snow tires on dry roads may not be as high as your vehicle's original equipment tires. Check with the tire dealer for maximum speed recommendations. 6-31 While Driving WARNING The use of tire chains may adversely affect vehicle handling: • Drive less than 20 MPH (30 km/h) or the chain manufacturer's recommended speed limit, whichever is lower. • Drive carefully and avoid bumps, holes, sharp turns, and other road hazards, which may cause the vehicle to bounce. • Avoid sharp turns or locked wheel braking. Information • Install tire chains on both left and right front tires. It should be noted that installing tire chains on the tires will provide a greater driving force, but will not prevent side skids. • Do not install studded tires without first checking local, state and municipal regulations for possible restrictions against their use. Chain installation When installing tire chains, follow the manufacturer’s instructions and mount them as tightly possible. Drive slowly (less than 20 MPH (30 km/h)) with chains installed. If you hear the chains contacting the body or chassis, stop and tighten them. If they still make contact, slow down until the noise stops. Remove the tire chains as soon as you begin driving on cleared roads. When mounting snow chains, park the vehicle on level ground away from traffic. Turn on the vehicle Hazard Warning Flasher and place a triangular emergency warning device behind the vehicle (if available). Always place the vehicle in P (Park), apply the parking brake and turn off the engine before installing snow chains. 6-32 NOTICE When using tire chains: • Wrong size chains or improperly installed chains can damage your vehicle's brake lines, suspension, body and wheels. • Use SAE "S" class or wire chains. • If you hear noise caused by chains contacting the body, retighten the chain to prevent contact with the vehicle body. • To prevent body damage, retighten the chains after driving 0.3~0.6 miles (0.5~1.0 km). • Do not use tire chains on vehicles equipped with aluminum wheels. If unavoidable, use a wire type chain. • Use wire chains less than 0.59 inch (15mm) wide to prevent damage to the chain’s connection. Winter Precautions Use High Quality Ethylene Glycol Coolant Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling system, lubricates the water pump and prevents freezing. Be sure to replace or replenish your coolant in accordance with the maintenance schedule in chapter 8. Before winter, have your coolant tested to assure that its freezing point is sufficient for the temperatures anticipated during the winter. 06 Change to "winter Weight" Oil if Necessary Do Not Let Ice and Snow Accumulate Underneath In some climates it is recommended that a lower viscosity "winter weight" oil be used during cold weather. See chapter 8 for recommendations. If you aren't sure what weight oil you should use, consult an authorized HYUNDAI dealer. Under some conditions, snow and ice can build up under the fenders and interfere with the steering. When driving in severe winter conditions where this may happen, you should periodically check underneath the car to be sure the movement of the front wheels and the steering components is not obstructed. Check Battery and Cables Winter puts additional burdens on the battery system. Visually inspect the battery and cables as described in chapter 8. The level of charge in your battery can be checked by an authorized HYUNDAI dealer or a service station. Check Spark Plugs and Ignition System Inspect your spark plugs as described in chapter 8 and replace them if necessary. Also check all ignition wiring and components to be sure they are not cracked, worn or damaged in any way. Use Approved Window Washer Antifreeze in System To keep the water in the window washer system from freezing, add an approved window washer anti-freeze solution in accordance with instructions on the container. Window washer anti-freeze is available from an authorized HYUNDAI dealer and most auto parts outlets. Do not use engine coolant or other types of antifreeze as these may damage the paint finish. Do Not Let Your Parking Brake Freeze Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the brakes are wet. If there is a risk the parking brake may freeze, apply it only temporarily while you put the gear selector lever in P and block the rear wheels so the car cannot roll. Then release the parking brake. Don't Place Foreign Objects or Materials in the Engine Compartment Placement of foreign object or materials which prevent cooling of the engine, in the engine compartment, may cause a failure or combustion. The manufacturer is not responsible for the damage caused by such placement. To Keep Locks from Freezing To keep the locks from freezing, squirt an approved de-icer fluid or glycerine into the key opening. If a lock is covered with ice, squirt it with an approved deicing fluid to remove the ice. If the lock is frozen internally, you may be able to thaw it out by using a heated key. Handle the heated key with care to avoid injury. Drive your vehicle when water vapor condenses and accumulates inside the exhaust pipes When the vehicle is stopped for a long time in winter while the engine is running, water vapor may condense and accumulate inside the exhaust pipes. Water in the exhaust pipes may cause noise, etc., but it is drained driving at medium to high speed. 6-33 While Driving VEHICLE LOAD LIMIT Two labels on your driver's door sill show how much weight your vehicle was designed to carry: the Tire and Loading Information Label and the Certification Label. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle’s weight ratings, from the vehicle's specifications and the Certification Label: GVWR (Gross Vehicle Weight Rating) This is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Certification Label located on the driver’s door sill. Tire Loading Information Label Base Curb Weight This is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight This is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment. OQX089051N Cargo Weight This figure includes all weight added to the Base Curb Weight, including cargo and optional equipment. GAW (Gross Axle Weight) This is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload. GAWR (Gross Axle Weight Rating) This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Certification Label. The total load on each axle must never exceed its GAWR. GVW (Gross Vehicle Weight) This is the Base Curb Weight plus actual Cargo Weight plus passengers. 6-34 OQX089052N The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle capacity weight. Vehicle Capacity Weight Vehicle capacity weight is the maximum combined weight of occupants and cargo. If your vehicle is equipped with a trailer, the combined weight includes the tongue load. 06 Seating Capacity Total: 5 persons (Front seat : 2 persons, Rear seat : 3 persons) Seating capacity is the maximum number of occupants including a driver, your vehicle may carry. However, the seating capacity may be reduced based upon the weight of all of the occupants, and the weight of the cargo being carried or towed. Do not overload the vehicle as there is a limit to the total weight, or load limit including occupants and cargo, the vehicle can carry. Towing Capacity We do not recommend using this vehicle for trailer towing. Cargo Capacity The cargo capacity of your vehicle will increase or decrease depending on the weight and the number of occupants and the tongue load, if your vehicle is equipped with a trailer. Steps for Determining Correct Load Limit 1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 - 750 (5 x 150) = 650 lbs.) 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. WARNING Do not overload the vehicle as there is a limit to the total weight, or load limit, including occupants and cargo, the vehicle can carry. Overloading can shorten the life of the vehicle. If the GVWR or the GAWR is exceeded, parts on the vehicle can break, and it can change the handling of your vehicle. These could cause you to lose control and result in an accident. 6-35 While Driving ≥ + Example 1 Maximum Load (1400 lbs.) (635 kg) Passenger Weight (150 lbs. × 2 = 300 lbs.) (68 kg × 2 = 136 kg) ≥ Cargo Weight (1100 lbs.) (499 kg) + Example 2 Maximum Load (1400 lbs.) (635 kg) Passenger Weight (150 lbs. × 5 = 750 lbs.) (68 kg × 5 = 340 kg) ≥ Cargo Weight (650 lbs.) (295 kg) + Example 3 Maximum Load (1400 lbs.) (635 kg) 6-36 Passenger Weight (172 lbs. × 5 = 860 lbs.) (78 kg × 5 = 390 kg) Cargo Weight (540 lbs.) (245 kg) 06 Certification Label WARNING OBH059070 The certification label is located on the driver’s door sill at the center pillar and shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. This label also tells you the maximum weight that can be supported by the front and rear axles, called Gross Axle Weight Rating (GAWR). The total weight of the vehicle, including all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle. Be sure to spread out your load equally on both sides of the centerline. Overloading • Never exceed the GVWR for your vehicle, the GAWR for either the front or rear axle and vehicle capacity weight. Exceeding these ratings can affect your vehicle’s handling and braking ability, and cause an accident. • Do not overload your vehicle. Overloading your vehicle can cause heat buildup in your vehicle’s tires and possible tire failure, increased stopping distances and poor vehicle handling-all of which may result in a crash. NOTICE Overloading your vehicle may cause damage. Repairs would not be covered by your warranty. Do not overload your vehicle. WARNING If you carry items inside your vehicle (for example, suitcases, tools, packages, or anything else), they are moving as fast as the vehicle. If you have to stop or turn quickly, or if there is a crash, the items will keep going and can cause an injury if they strike the driver or a passenger. • Put items in the cargo area of your vehicle. Try to spread the weight evenly. • Do not stack items, like suitcases, inside the vehicle above the tops of the seats. • Do not leave an unsecured child restraint in your vehicle. • When you carry something inside the vehicle, secure it. 6-37 While Driving TRAILER TOWING We do not recommend using this vehicle for trailer towing. 6-38 7. Driver Assistance System Driver Assistance system functions can be updated by infotainment software update. Descriptions for each function of the system may differ from the owners’ manual once updated. Refer to the user’s manual provided in the infotainment system and the quick reference guide. Driving Safety Forward Collision–Avoidance Assist (FCA) (Front view camera only) .................... 7-2 Forward Collision–Avoidance Assist (FCA) (Sensor fusion) ...................................7-14 Lane Keeping Assist (LKA)........................................................................................ 7-29 Blind-Spot Collision Warning (BCW)....................................................................... 7-35 Manual Speed Limit Assist (MSLA).......................................................................... 7-45 Driver Attention Warning (DAW)..............................................................................7-48 Driving Convenience Cruise Control (CC)................................................................................................... 7-53 Parking Safety Rear View Monitor (RVM)......................................................................................... 7-57 Rear Cross-Traffic Collision Warning (RCCW).........................................................7-59 Declaration of Conformity.............................................................................................. 7-67 7 Driver Assistance System FORWARD COLLISION–AVOIDANCE ASSIST (FCA) (FRONT VIEW CAMERA ONLY) (IF EQUIPPED) CAUTION OTM070237 Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or detect a pedestrian in the roadway and warn the driver that a collision is imminent with a warning message, and audible warning and apply emergency braking. Detecting sensor OQX072027N [1] : Front view camera Refer to the picture above for the detailed location of the detecting sensor. 7-2 Take the following precautions to maintain optimal performance of the detecting sensor: • Never disassemble the detecting sensor or sensor assembly, or cause any damage to it. • If the detecting sensor have been replaced or repaired, have your vehicle inspected by an authorized HYUNDAI dealer. • Never install any accessories or stickers on the front windshield, or tint the front windshield. • Pay extreme caution to keep the front view camera dry. • Never place any reflective objects (for example, white paper, mirror) over the dashboard. 07 Forward Collision-Avoidance Assist settings WARNING When the engine is restarted, Forward Collision-Avoidance Assist will always turn on. However, if Forward Safety is deselected, the driver should always be aware of the surroundings and drive safely. Information OBR2072027BR Forward Safety With the engine on, select or deselect ‘Driver Assistance → Driving Safety’ from the Settings menu to set whether or not to use each function. If ‘Forward Safety’ is selected, Forward Collision-Avoidance Assist will warn you with a warning message and an audible warning depending on the collision risk levels. Braking assist will be applied depending on the collision risk levels. You can monitor Forward CollisionAvoidance Assist selected or deselected status from the Settings menu. If the warning light remains on when Forward Collision-Avoidance Assist is on, have the vehicle inspected by an authorized HYUNDAI dealer. Forward Collision-Avoidance Assist will turn off when ESC is turned off by pressing and holding the ESC OFF button. The warning light will illuminate on the cluster. 7-3 Driver Assistance System OQX072049N OUS4071201L Forward Safety Warning Timing With the engine on, select ‘Driver Assistance → Driving Safety → Forward Safety Warning Timing’ from the Settings menu to change the initial warning activation time for Forward CollisionAvoidance Assist. When the vehicle is first delivered, Warning Timing is set to standard. CAUTION • The setting of the Forward Safety Warning Timing and Warning Volume applies to all functions of Forward Collision- Avoidance Assist. • Even though ‘Standard’ is selected for Forward Safety Warning Timing, if the front vehicle suddenly stops, the initial warning activation time may seem late. • Select ‘Late’ for Forward Safety Warning Timing when traffic is light and when driving speed is slow. Information If the engine is restarted, Forward Safety Warning Timing and Warning Volume will maintain the last setting. 7-4 OQX072057N Warning Methods With the engine on, select ‘User Settings → Driver Assistance → Warning Volume’ from the Settings menu in the cluster or select ‘Setup → Vehicle Settings → Driver Assistance → Warning Methods → Warning Volume’ from the Settings menu in the infotainment system to change the Warning Volume. 07 Forward Collision-Avoidance Assist operation Warning and control The basic feature of Forward CollisionAvoidance Assist is to warn and help control the vehicle depending on collision risk level: ‘collision Warning’, ‘Emergency Braking’ and ‘Stopping vehicle and ending brake control’. OQX072029N OQX072028N Collision Warning • To warn the driver of a collision, the ‘Collision Warning’ warning message will appear on the cluster and an audible warning will sound. • If a vehicle is detected in front, the function will operate when your vehicle speed is between approximately 3-112 mph (5-180 km/h). • If a pedestrian is detected in front, the function will operate when your vehicle speed is between approximately 3-50 mph (5-80 km/h). Emergency Braking • To warn the driver that emergency braking will occur, the ‘Emergency Braking’ warning message will appear on the cluster and an audible warning will sound. • If a vehicle is detected in front, the function will operate when your vehicle speed is between approximately 3-37 mph (5-60 km/h). • If a pedestrian is detected in front, the function will operate when your vehicle speed is between approximately 3-37 mph (5-60 km/h). • In emergency braking situation, braking is assisted with strong braking power by the function to help prevent collision with the vehicle or pedestrian ahead. 7-5 Driver Assistance System OQX072030N Stopping vehicle and ending brake control • When the vehicle is stopped due to emergency braking, the ‘Drive carefully’ warning message will appear on the cluster. For your safety, the driver should depress the brake pedal immediately and check the surroundings. • Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds. WARNING Take the following precautions when using Forward Collision-Avoidance Assist: • For your safety, change the Settings after parking the vehicle at a safe location. • With Forward Safety selected, when ESC is turned off by pressing and holding the ESC OFF button, Forward Collision-Avoidance Assist will turn off automatically. In this case, Forward Collision-Avoidance Assist cannot be set from the warning Settings menu and the light will illuminate on the cluster which is normal. If ESC is turned on by pressing the ESC OFF button, Forward Collision-Avoidance Assist will maintain the last setting. 7-6 • Forward Collision-Avoidance Assist does not operate in all situations or cannot avoid all collisions. • The driver should hold the responsibility to control the vehicle. Do not solely depend on Forward Collision-Avoidance Assist. Rather, maintain a safe braking distance, and, if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle. • Never deliberately operate Forward Collision-Avoidance Assist on people, objects, etc. It may cause serious injury or death. • Forward Collision-Avoidance Assist may not operate if the driver depresses the brake pedal to avoid collision. • Depending on the road and driving conditions, Forward CollisionAvoidance Assist may warn the driver late or may not warn the driver. • During Forward Collision-Avoidance Assist operation the vehicle may stop suddenly injuring passengers and shifting loose objects. Always have the seat belt on and keep loose objects secured. • If any other function’s warning message is displayed or audible warning is generated, Forward Collision-Avoidance Assist warning message may not be displayed and audible warning may not be generated. • You may not hear the warning sound of Forward Collision-Avoidance Assist if the surrounding is noisy. • Forward Collision-Avoidance Assist may turn off or may not operate properly or may operate unnecessarily depending on the road conditions and the surroundings. 07 WARNING • Even if there is a problem with Forward Collision-Avoidance Assist, the vehicle’s basic braking performance will operate properly. • During emergency braking, braking control by Forward CollisionAvoidance Assist will automatically cancel when the driver excessively depresses the accelerator pedal or sharply steers the vehicle. Forward Collision-Avoidance Assist malfunction and limitations Forward Collision-Avoidance Assist malfunction CAUTION Depending on the condition of the vehicle, pedestrian in front and the surroundings, the speed range to operate Forward Collision-Avoidance Assist may reduce. Forward CollisionAvoidance Assist may only warn the driver, or it may not operate. Information • In a situation where collision is imminent, braking may be assisted by Forward Collision-Avoidance Assist when braking is insufficient by the driver. • The images and colors in the instrument cluster may differ depending on the cluster type or theme selected from the instrument cluster. OTM070094N When Forward Collision-Avoidance Assist is not working properly, the ‘Check Forward Safety system’ warning message and warning will appear, and the lights will illuminate on the cluster. Have the vehicle inspected by an authorized HYUNDAI dealer. 7-7 Driver Assistance System Forward Collision-Avoidance Assist disabled OTM070093N When the front windshield where the front view camera is located or the sensor is covered with foreign material, such as snow or rain, it can reduce the detecting performance and temporarily limit or disable Forward CollisionAvoidance Assist. If this occurs the ‘Forward Safety system disabled. Camera obscured’ warning and warning message, and the lights will illuminate on the cluster. Forward Collision-Avoidance Assist will operate properly when such snow, rain or foreign material is removed. If Forward Collision-Avoidance Assist does not operate properly after obstruction (snow, rain, or foreign material) is removed, have the vehicle inspected by an authorized HYUNDAI dealer. WARNING • Even though the warning message or warning light does not appear on the cluster, Forward Collision-Avoidance Assist may not properly operate. • Forward Collision-Avoidance Assist may not properly operate in an area (e.g. open terrain), where any objects are not detected after turning ON the engine. 7-8 Limitations of Forward CollisionAvoidance Assist Forward Collision-Avoidance Assist may not operate properly, or it may operate unexpectedly under the following circumstances: • The detecting sensor or the surroundings are contaminated or damaged • The temperature around the front view camera is high or low due to surrounding environment • The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or sticky foreign material (sticker, bug, etc.) on the glass • Moisture is not removed or frozen on the windshield • Washer fluid is continuously sprayed, or the wiper is on • Driving in heavy rain or snow, or thick fog • The field of view of the front view camera is obstructed by sun glare • Street light or light from an oncoming traffic is reflected on the wet road surface, such as a puddle on the road • An object is placed on the dashboard • Your vehicle is being towed • The surrounding is very bright • The surrounding is very dark, such as in a tunnel, etc. • The brightness changes suddenly, for example when entering or exiting a tunnel • The brightness outside is low, and the headlamps are not on or are not bright 07 • Driving through steam, smoke or shadow • Only part of the vehicle, pedestrian is detected • The vehicle in front is a bus, heavy truck, truck with an unusually shaped cargo, trailer, etc. • The vehicle in front has no tail lights, tail lights are located unusually, etc. • The brightness outside is low, and the tail lamps are not on or are not bright • The rear of the front vehicle is small or the vehicle does not look normal, such as when the vehicle is tilted, overturned, or the side of the vehicle is visible, etc. • The front vehicle’s ground clearance is low or high • A vehicle, pedestrian suddenly cuts in front • The vehicle in front is detected late • The vehicle in front is suddenly blocked by an obstacle • The vehicle in front suddenly changes lane or suddenly reduces speed • The vehicle in front is bent out of shape • The front vehicle’s speed is fast or slow • The vehicle in front steers in the opposite direction of your vehicle to avoid a collision • With a vehicle in front, your vehicle changes lane at low speed • The vehicle in front is covered with snow • You are departing or returning to the lane • Unstable driving • You are on a roundabout and the vehicle in front is not detected • You are continuously driving in a circle • The vehicle in front has an unusual shape • The vehicle in front is driving uphill or downhill • The pedestrian is not fully detected, for example, if the pedestrian is leaning over or is not fully walking upright • The pedestrian is wearing clothing or equipment that makes it difficult to detect OADAS051 The illustration above shows the image the front view camera is capable of detecting as a vehicle, pedestrian. • The pedestrian in front is moving very quickly • The pedestrian in front is short or is posing a low posture • The pedestrian in front has impaired mobility • The pedestrian in front is moving intersected with the driving direction 7-9 Driver Assistance System • There is a group of pedestrians, or a large crowd in front • The pedestrian is wearing clothing that easily blends into the background, making it difficult to detect • The pedestrian is difficult to distinguish from the similarly shaped structure in the surroundings • You are driving by a pedestrian, traffic sign, structure, etc., near the intersection • Driving in a parking lot • Driving through a tollgate, construction area, unpaved road, partial paved road, uneven road, speed bumps, etc. • Driving on an incline road, curved road, etc. • Driving through a roadside with trees or streetlights • The adverse road conditions cause excessive vehicle vibrations while driving • Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc. • Driving through a narrow road where trees or grass or overgrown • There is interference by electromagnetic waves such as driving in an area with strong radio waves or electrical noise 7-10 WARNING • Driving on a curved road OADAS003 OADAS002 Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians in front of you on curved roads adversely affecting the performance of the sensors. This may result in no warning or braking assist when necessary. When driving on a curved road, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. 07 • Driving on an inclined road OADAS006 OADAS005 Forward Collision-Avoidance Assist may detect a vehicle, pedestrians or cyclists in the next lane or outside the lane when driving on a curved road. If this occurs, Forward CollisionAvoidance Assist may unnecessarily warn the driver and control the brake. Always check the traffic conditions around the vehicle. OADAS009 OADAS007 Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians or cyclists in front of you while driving uphill or downhill adversely affecting the performance of the sensors. This may result in unnecessary warning or braking assist, or no warning or braking assist when necessary. 7-11 Driver Assistance System Also, vehicle speed may rapidly decrease when a vehicle, pedestrian or cyclist ahead is suddenly detected. Always have your eyes on the road while driving uphill or downhill and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. • Changing lanes OADAS033 [A] : Your vehicle, [B] : Lane changing vehicle, [C] : Same lane vehicle OADAS032 [A] : Your vehicle, [B] : Lane changing vehicle When a vehicle moves into your lane from an adjacent lane, it cannot be detected by the sensor until it is in the sensor's detection range. Forward Collision-Avoidance Assist may not immediately detect the vehicle when the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. 7-12 When a vehicle in front of you merges out of the lane, Forward Collision-Avoidance Assist may not immediately detect the vehicle that is now in front of you. In this case, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. 07 • Detecting vehicle • Forward Collision-Avoidance Assist may not operate properly if interfered by strong electromagnetic waves. • Forward Collision-Avoidance Assist may not operate for 15 seconds after the vehicle is started, or the front view camera is initialized. Information OQX061085 If the vehicle in front of you has cargo that extends rearward from the cab, or when the vehicle in front of you has higher ground clearance, additional special attention is required. Forward CollisionAvoidance Assist may not be able to detect the cargo extending from the vehicle. In these instances, you must maintain a safe braking distance from the rearmost object, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain distance. WARNING • When you are towing a trailer or another vehicle, we recommend that Forward Collision-Avoidance Assist is turned off due to safety reasons. • Forward Collision-Avoidance Assist may operate if objects that are similar in shape or characteristics to vehicles, pedestrians or cyclists are detected. • Forward Collision-Avoidance Assist does not operate on bicycles, motorcycles, or smaller wheeled objects, such as luggage bags, shopping carts, or strollers. This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 7-13 Driver Assistance System FORWARD COLLISION–AVOIDANCE ASSIST (FCA) (SENSOR FUSION) (IF EQUIPPED) Detecting sensor Basic function OJK070172 OQX072027N Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclist in the roadway and warn the driver that a collision is imminent with a warning message and an audible warning, and if necessary, apply emergency braking. OQX051144 [1] : Front view camera (if equipped) [2] : Front radar Refer to the picture above for the detailed location of the detecting sensors. 7-14 07 CAUTION Take the following precautions to maintain optimal performance of the detecting sensor: • Never disassemble the detecting sensor or sensor assembly, or apply any impact on it. • If the detecting sensors have been replaced or repaired, have your vehicle inspected by an authorized HYUNDAI dealer. • Never install any accessories or stickers on the front windshield, or tint the front windshield. • Exercise extreme caution to keep the front view camera dry. • Never place any reflective objects (for example, white paper, mirror) over the dashboard. Any light reflection may prevent the function from functioning properly. • Do not place any objects near the front windshield or install any accessories on the front windshield. It can affect the performance of the defogging and defrosting function of the climate control system, which may prevent the Driver Assistance systems from operating. • Do not apply license plate frame or objects, such as a bumper sticker, film or a bumper guard, near the front radar cover. • Always keep the front radar and cover clean and free of dirt and debris. Use only a soft cloth to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover. • If unnecessary force has been applied to the radar or the area around the radar, Forward CollisionAvoidance Assist may not properly operate even though a warning message does not appear on the cluster. Have the vehicle be inspected by an authorized HYUNDAI dealer. • Use only genuine parts to repair or replace a damaged front radar cover. Do not apply paint to the front radar cover. 7-15 Driver Assistance System Forward Collision-Avoidance Assist Settings Setting features WARNING When the engine is restarted, Forward Collision-Avoidance Assist will always turn on. However, if ‘Off’ is selected, the driver should always be aware of the surroundings and drive safely. CAUTION • If ‘Warning Only’ is selected, braking is not assisted. • The settings for Forward Safety include ‘Basic function’. OTM070090N Forward Safety With the engine on, select or deselect 'Driver Assistance → Driving Safety' from the Settings menu to set whether or not to use each function. If 'Forward Safety' is selected, Forward Collision-Avoidance Assist will warn you with a warning message and an audible warning depending on the collision risk levels. Braking assist will be applied depending on the collision risk levels. The driver can monitor Forward CollisionAvoidance Assist ON/OFF status from the warning light Settings menu. If the remains ON when the vehicle is ON, have the vehicle inspected by an authorized HYUNDAI dealer. 7-16 Information Forward Collision-Avoidance Assist will turn off when ESC is turned off by pressing and holding the ESC OFF button. warning light will illuminate on The the cluster. 07 OQX072049N OOS070110N Forward Safety Warning Timing With the engine on, select ‘Driver Assistance → Forward Safety Warning Timing’ from the Settings menu to change the initial warning activation time for Forward Collision-Avoidance Assist. When the vehicle is first delivered, Forward Safety Warning Timing is set to ‘Standard’. CAUTION • The setting of the Warning Timing and Warning Volume applies to all functions of Forward CollisionAvoidance Assist. • Even though ‘Standard’ is selected for Warning Timing, if the front vehicle suddenly stops, the initial warning activation time may seem late. • Select ‘Late’ for Warning Timing when traffic is light and when driving speed is slow. OQX072057N Warning Methods With the engine on, select ‘Driver Assistance → Warning Volume’ from the Settings menu to change the Warning Volume to ‘High’, ‘Medium’ or ‘Low’ for Forward Collision-Avoidance Assist. Information If the engine is restarted, Forward Safety Warning Timing will maintain the last setting. 7-17 Driver Assistance System Forward Collision-Avoidance Assist Operation Basic function Warning and control The basic function for Forward CollisionAvoidance Assist is to help warn and control the vehicle depending on the Collision risk level: ‘Collision Warning’, ‘Emergency Braking’ and ‘Stopping vehicle and ending brake control’. OQX072029N Emergency Braking OQX072028N Collision Warning • To warn the driver of a collision, the ‘Collision Warning’ warning message will appear on the cluster and an audible warning will sound. • If a vehicle is detected in front, the function will operate when your vehicle speed is between approximately 3-124 mph (5-200 km/h). • If a pedestrian or cyclist is detected in front, the function will operate when your vehicle speed is between approximately 3-52 mph (5-85 km/h). • If ‘Active Assist’ is selected, braking may be assisted. 7-18 • To warn the driver that emergency braking will be assisted, the ‘Emergency Braking’ warning message will appear on the cluster and an audible warning will sound. • If a stopping vehicle is detected in front, the function will operate when your vehicle speed is between approximately 3-37 mph (5-46 km/h). If a moving vehicle is detected in front, the function will operate when your vehicle speed is between approximately 3-80 mph (5-130 km/h). • If a pedestrian or cyclist is detected in front, the function will operate when your vehicle speed is between approximately 3-40 mph (5-65 km/h). • In emergency braking situation, braking is assisted with strong braking power by the function to help prevent collision with the vehicle, pedestrian or cyclist ahead. 07 WARNING OQX072030N Stopping vehicle and ending brake control • When the vehicle is stopped due to emergency braking, the ‘Drive carefully’ warning message will appear on the cluster. For your safety, the driver should depress the brake pedal immediately and check the surroundings. • Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds. Take the following precautions when using Forward Collision-Avoidance Assist: • For your safety, only change the Settings after parking the vehicle at a safe location. • With ‘Active Assist’ or ‘Warning Only’ selected, when ESC is turned off by pressing and holding the ESC OFF button, Forward Collision-Avoidance Assist will turn off automatically. In this case, Forward CollisionAvoidance Assist cannot be set from the Settings menu and the warning light will illuminate on the cluster which is normal. If ESC is turned on by pressing the ESC OFF button, Forward Collision-Avoidance Assist will maintain the last setting. • Forward Collision-Avoidance Assist does not operate in all situations or cannot avoid all collisions. • The driver has the responsibility to control the vehicle. Do not solely depend on Forward CollisionAvoidance Assist. Rather, maintain a safe braking distance, and if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle. • Never deliberately operate Forward Collision-Avoidance Assist on people, animal, objects, etc. It may cause serious injury or death. • Forward Collision-Avoidance Assist may not operate if the driver depresses the brake pedal to avoid collision. 7-19 Driver Assistance System • Depending on the road and driving conditions, Forward CollisionAvoidance Assist may warn the driver late or may not warn the driver. • During Forward Collision-Avoidance Assist operation, the vehicle may stop suddenly injuring passengers and shifting loose objects. Always have the seat belt on and keep loose objects secured. • If any other function’s warning message is displayed or audible warning is generated, Forward Collision-Avoidance Assist warning message may not be displayed and audible warning may not be generated. • You may not hear the warning sound of Forward Collision-Avoidance Assist if the surrounding is noisy. • Forward Collision-Avoidance Assist may turn off or may not operate properly or may operate unnecessarily depending on the road conditions and the surroundings. WARNING • Even if there is a problem with Forward Collision-Avoidance Assist, the vehicle’s basic braking performance will operate normally. • During emergency braking, braking control by Forward CollisionAvoidance Assist will automatically cancel when the driver excessively depresses the accelerator pedal or sharply steers the vehicle. 7-20 CAUTION • Forward Collision-Avoidance Assist operating speed range may reduce due to the conditions of the vehicle or pedestrian in front or surroundings. Depending on the speed, Forward Collision-Avoidance Assist may only warn the driver, or it may not operate. • Forward Collision-Avoidance Assist will operate under certain conditions by judging the risk level based on the condition of the oncoming vehicle, driving direction, speed and surroundings. Information • In a situation where collision is imminent, braking may be assisted by Forward Collision-Avoidance Assist when braking is insufficient by the driver. • The images and colors in the instrument cluster may differ depending on the cluster type or theme selected from the instrument cluster. 07 Forward Collision-Avoidance Assist Malfunction and Limitations Forward Collision-Avoidance Assist disabled Forward Collision-Avoidance Assist malfunction OTM070093N OTM070094N When Forward Collision-Avoidance Assist is not working properly, the ‘Check Forward Safety system(s)’ warning and message will appear, and the warning lights will illuminate on the cluster. Have the vehicle inspected by an authorized HYUNDAI dealer. OTM070095N When the front windshield where the front view camera is located, front radar cover or sensor is covered with foreign material, such as snow or rain, it can reduce the detecting performance and temporarily limit or disable Forward Collision-Avoidance Assist. If this occurs the ‘Forward Safety system(s) disabled. Camera obscured’ or the ‘Forward Safety system(s) disabled. Radar blocked’ warning message, and warning lights will and the illuminate on the cluster. The Forward Collision-Avoidance Assist will operate normally when when such snow, rain or foreign material is removed. If the Forward Collision-Avoidance Assist does not operate normally after obstruction (snow, rain, or foreign material) is removed, have the vehicle inspected by an authorized HYUNDAI dealer. 7-21 Driver Assistance System WARNING • Even though the warning message or warning light does not appear on the cluster, Forward Collision-Avoidance Assist may not properly operate. • Forward Collision-Avoidance Assist may not properly operate in an area (for example, open terrain), where any substance are not detected after turning ON the engine. Limitations of Forward CollisionAvoidance Assist Forward Collision-Avoidance Assist may not operate normally, or it may operate unexpectedly under the following circumstances: • The detecting sensor or the surroundings are contaminated or damaged • The temperature around the front view camera is high or low • The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or sticky foreign material (sticker, bug, etc.) on the glass • Moisture is not removed or frozen on the windshield • Washer fluid is continuously sprayed, or the wiper is on • Driving in heavy rain or snow, or thick fog • The field of view of the front view camera is obstructed by sun glare • Street light or light from an oncoming vehicle is reflected on the wet road surface, such as a puddle on the road • An object is placed on the dashboard 7-22 • Your vehicle is being towed • The surrounding is very bright • The surrounding is very dark, such as in a tunnel, etc. • The brightness changes suddenly, for example when entering or exiting a tunnel • The brightness outside is low, and the headlights are not on or are not bright • Driving through steam, smoke or shadow • Only part of the vehicle, pedestrian or cyclist is detected • The vehicle in front is a bus, heavy truck, truck with a unusually shaped cargo, trailer, etc. • The vehicle in front has no tail lights, tail lights are located unusually, etc. • The brightness outside is low, and the tail lamps are not on or are not bright • The rear of the front vehicle is small or the vehicle does not look normal, such as when the vehicle is tilted, overturned, or the side of the vehicle is visible, etc. • The front vehicle’s ground clearance is low or high • A vehicle, pedestrian or cyclist suddenly cuts in front • The bumper around the front radar is impacted, damaged or the front radar is out of position • The temperature around the front radar is high or low 07 • Driving through a tunnel or iron bridge • Driving in large areas where there are few vehicles or structures (for example, desert, meadow, suburb, etc.) • Driving near areas containing metal substances, such as a construction zone, railroad, etc. • A material is near that reflects very well on the front radar, such as a guardrail, nearby vehicle, etc. • The cyclist in front is on a bicycle made of material that does not reflect on the front radar • The vehicle in front is detected late • The vehicle in front is suddenly blocked by an obstacle • The vehicle in front suddenly changes lane or suddenly reduces speed • The vehicle in front is bent out of shape • The front vehicle’s speed is fast or slow • The vehicle in front steers in the opposite direction of your vehicle to avoid a collision • With a vehicle in front, your vehicle changes lane at low speed • The vehicle in front is covered with snow • You are departing or returning to the lane • Unstable driving • You are on a roundabout and the vehicle in front is not detected • You are continuously driving in a circle • The vehicle in front has an unusual shape • The vehicle in front is driving uphill or downhill • The pedestrian or cyclist is not fully detected, for example, if the pedestrian is leaning over or is not fully walking upright • The pedestrian or cyclist is wearing clothing or equipment that makes it difficult to detect as a pedestrian or cyclist OADAS044 The illustration above shows the image the front view camera is capable of detecting as a vehicle, pedestrian and cyclist. • The pedestrian or cyclist in front is moving very quickly • The pedestrian or cyclist in front is short or is posing a low posture • The pedestrian or cyclist in front has impaired mobility • The pedestrian or cyclist in front is moving intersected with the driving direction • There is a group of pedestrians, cyclists or a large crowd in front 7-23 Driver Assistance System • The pedestrian or cyclist is wearing clothing that easily blends into the background, making it difficult to detect • The pedestrian or cyclist is difficult to distinguish from the similar shaped structure in the surroundings • You are driving by a pedestrian, cyclist, traffic sign, structure, etc. near the intersection • Driving in a parking lot • Driving through a tollgate, construction area, unpaved road, partial paved road, uneven road, speed bumps, etc. • Driving on an incline road, curved road, etc. • Driving through a roadside with trees or streetlights • The adverse road conditions cause excessive vehicle vibrations while driving • Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc. • Driving through a narrow road where trees or grass are overgrown • There is interference by electromagnetic waves, such as driving in an area with strong radio waves or electrical noise 7-24 WARNING • Driving on a curved road OADAS014 OADAS016 OADAS018 Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians or cyclists in front of you on curved roads adversely affecting the performance of the sensors. This may result in no warning or braking assist when necessary. When driving on a curve, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. 07 • Driving on an inclined road OADAS015 OADAS012 OADAS017 OADAS019 Forward Collision-Avoidance Assist may detect a vehicle, pedestrian or cyclist in the next lane or outside the lane when driving on a curved road. If this occurs, Forward CollisionAvoidance Assist may unnecessarily warn the driver and control the brake. Always check the traffic conditions around the vehicle. OADAS010 OADAS011 Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians or cyclists in front of you while driving uphill or downhill adversely affecting the performance of the sensors. This may result in unnecessary warning or braking assist, or no warning or braking assist when necessary. Also, vehicle speed may rapidly decrease when a vehicle, pedestrian or cyclist ahead is suddenly detected. Always have your eyes on the road while driving uphill or downhill and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. 7-25 Driver Assistance System • Changing lanes OADAS031 OADAS030 [A] : Your vehicle, [B] : Lane changing vehicle When a vehicle moves into your lane from an adjacent lane, it cannot be detected by the sensor until it is in the sensor's detection range. Forward Collision-Avoidance Assist may not immediately detect the vehicle when the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. 7-26 [A] : Your vehicle, [B] : Lane changing vehicle, [C] : Same lane vehicle When a vehicle in front of you merges out of the lane, Forward Collision-Avoidance Assist may not immediately detect the vehicle that is now in front of you. In this case, you must maintain a safe braking distance, and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance. 07 • Detecting vehicle WARNING OQX061086 If the vehicle in front of you has cargo that extends rearward from the cab, or when the vehicle in front of you has higher ground clearance, additional special attention is required. Forward CollisionAvoidance Assist may not be able to detect the cargo extending from the vehicle. In these instances, you must maintain a safe braking distance from the rearmost object, and if necessary, steer your vehicle and depress the brake pedal to reduce your driving speed in order to maintain distance. • When you are towing a trailer or another vehicle, have Forward Collision-Avoidance Assist is turned off due to safety reasons. • Forward Collision-Avoidance Assist may operate if objects that are similar in shape or characteristics to vehicles, pedestrians and cyclists are detected. • Forward Collision-Avoidance Assist does not operate on bicycles, motorcycles, or smaller wheeled objects, such as luggage bags, shopping carts, or strollers. • Forward Collision-Avoidance Assist may not operate normally if interfered by strong electromagnetic waves. • Forward Collision-Avoidance Assist may not operate for 15 seconds after the vehicle is started, or the front view camera is initialized. 7-27 Driver Assistance System Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 7-28 07 LANE KEEPING ASSIST (LKA) (IF EQUIPPED) Lane Keeping Assist is designed to help detect lane markings (or road edges) while driving over a certain speed. Lane Keeping Assist will warn the driver if the vehicle leaves the lane without using the turn signal, or will automatically assist the driver’s steering to help prevent the vehicle from departing the lane. Lane Keeping Assist settings Detecting sensor OBR2072033BR OQX072027N [1] : Front view camera The front view camera is used as a detecting sensor to detect lane markings (or road edges). Refer to the picture above for the detailed location of the detecting sensor. CAUTION For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA)” section in chapter 7. Lane Safety With the engine on, select or deselect ‘Driver Assistance → Driving Safety’ from the Settings menu to set whether or not to use each function. - If ‘Lane Safety’ is selected, Lane Keeping Assist will automatically assist you with steering when lane departure is detected to help prevent the vehicle from moving out of its lane. WARNING • Lane Keeping Assist does not control the steering wheel when the vehicle is driven in the middle of the lane. • The driver should always be aware of the surroundings and steer the vehicle if Lane Safety is deselected. 7-29 Driver Assistance System Lane Keeping Assist operation Turning Lane Keeping Assist On/Off OUS4071201L OBR2072034BR Turning Lane Keeping Assist On/Off With the engine on, press and hold the ) located Lane Driving Assist button( on the steering wheel on the left hand side of the steering wheel to turn on and off Lane Keeping Assist. The indicator ) will illuminate on the cluster. light ( OQX072057N Warning Methods With the engine on, select ‘User Settings → Driver Assistance → Warning Volume’ from the Settings menu in the cluster or select ‘Setup → Vehicle Settings → Driver Assistance → Warning Methods → Warning Volume’ from the Settings menu in the infotainment system to change the Warning Volume. 7-30 Information If the engine is restarted, Lane Keeping Assist will maintain the last setting. 07 Warning and control Lane Keeping Assist will warn and help control the vehicle with Lane Departure Warning and Lane Keeping Assist. „ Left „ Right OQX072031N Lane Keeping Assist • To warn the driver that the vehicle is departing from the projected lane indicator in front, the green light will blink on the cluster, and the steering wheel will make adjustments to keep the vehicle inside the lane. • Lane Keeping Assist will operate when your vehicle speed is between approximately 37-120 mph (60-200 km/h). OQX072032N Lane Departure Warning • To warn the driver that the vehicle is departing from the projected lane in indicator light front, the green will blink on the cluster, the lane line will blink on the cluster depending on which direction the vehicle is veering, and an audible warning will sound. • Lane Keeping Assist will operate when your vehicle speed is between approximately 37-120 mph (60-200 km/h). OQX072033N Hands-off warning If the driver takes their hands off the steering wheel for several seconds, the ‘Keep hands on the steering wheel’ warning message will appear on the cluster, and an audible warning will sound in stages. 7-31 Driver Assistance System WARNING • The steering wheel may not be assisted if the steering wheel is held very tight or the steering wheel is steered over a certain degree. • Lane Keeping Assist does not operate at all times. It is the responsibility of the driver to safely steer the vehicle and to maintain the vehicle in its lane. • The hands–off warning message may appear late depending on road conditions. Always have your hands on the steering wheel while driving. • If the steering wheel is held very lightly, the hands–off warning message may appear because Lane Keeping Assist may not recognize that the driver has their hands on the steering wheel. • If you attach objects to the steering wheel, the hands-off warning may not work properly. Information • For more details on setting the functions in the infotainment system Vehicle Settings, refer to “User settings mode” section in chapter 4. • When lane markings (or road edges) are detected, the lane lines on the cluster will change from grey to white indicator light will and the green illuminate. „ Lane undetected OQX072034N „ Lane detected OQX072035N • Even though the steering is assisted by Lane Keeping Assist, the driver may control the steering wheel. • The steering wheel may feel heavier or lighter when the steering wheel is assisted by Lane Keeping Assist than when it is not. Information The images or colors may be displayed differently depending on the specifications of the instrument panel or theme. 7-32 07 Lane Keeping Assist malfunction and limitations Lane Keeping Assist malfunction OTM070035N When Lane Keeping Assist is not working properly, the ‘Check Lane Keeping Assist (LKA) system’ warning message will indicator appear and the yellow light will illuminate on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. Limitations of Lane Keeping Assist Lane Keeping Assist may not operate properly or may operate unexpectedly under the following circumstances: • The lane is contaminated or difficult to detect: - The lane markings (or road edge) are covered with rain, snow, dirt, oil, etc. - The color of the lane marking (or road edge) is not distinguishable from the road - There are markings (or road edges) on the road near the lane or the markings (or road edges) on the road look similar to the lane markings (or road edge) - The lane marking (or road edge) is indistinct or damaged - The shadow is on the lane marking (or road edge) by a median strip, trees, guardrail, noise barriers, etc. • The number of lanes change or the lanes merge • There are more than two lane markings (or road edges) on the road • The lane markings (or road edges) are complicated or a structure substitutes for the lines, such as a construction area • There are road markings, such as zigzag lanes, crosswalk markings and road signs • The lane suddenly disappears, such as at the intersection • The lane (or road width) is very wide or narrow • There is a road edge without a lane • There is a boundary structure in the roadway, such as a tollgate, sidewalk, curb, etc. • The distance to the front vehicle is extremely short or the vehicle in front is covering the lane marking (or road edge) 7-33 Driver Assistance System Information For more details on the limitations of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA)” section in chapter 7. WARNING Take the following precautions when using Lane Keeping Assist: • The driver should hold the responsibility to safely drive and control the vehicle. Do not solely rely on Lane Keeping Assist and drive dangerously. • The operation of Lane Keeping Assist can be cancelled or not work properly depending on road conditions and surroundings. Always be cautious while driving. • Refer to “Limitations of Lane Keeping Assist” if the lane is not detected properly. • When you are towing a trailer or another vehicle, we recommend that Lane Keeping Assist is turned off due to safety reasons. • If the vehicle is driven at high speed, the steering wheel will not be controlled. The driver must always follow the speed limit when using Lane Keeping Assist. 7-34 • If any other system’s warning message is displayed or audible warning is generated, Lane Keeping Assist warning message may not be displayed and audible warning may not be generated. • You may not hear the warning sound of Lane Keeping Assist if the surrounding is noisy. • If you attach objects to the steering wheel, steering may not be assisted properly. • Lane Keeping Assist may not operate for 15 seconds after the vehicle is started, or the front view camera is initialized. • Lane Keeping Assist will not operate when: - The turn signal or hazard warning flasher is turned on - The vehicle is not driven in the center of the lane when Lane Keeping Assist is turned on or right after changing a lane - ESC (Electronic Stability Control) or VSM (Vehicle Stability Management) is activated - The vehicle is driven on a sharp curve - The vehicle speed is below 35 mph (55 km/h) or above 130 mph (210 km/h) - The vehicle makes sharp lane changes - The vehicle brakes suddenly 07 BLIND-SPOT COLLISION WARNING (BCW) (IF EQUIPPED) Blind-Spot Collision Warning is designed to help detect and monitor approaching vehicles in the driver’s blind spot area and warn the driver of a possible collision with a warning message and audible warning. OJX1079026 Blind-Spot Collision Warning helps detect and informs the driver that a vehicle is approaching at high speed from the blind spot area. OJX1079256 Blind-Spot Collision Warning helps detect and informs the driver that a vehicle is in the blind spot. CAUTION The detecting range may vary depending on the speed of your vehicle. Even if there is a vehicle in the blind spot area, Blind-Spot Collision Warning may not warn you when you pass by at high speeds. 7-35 Driver Assistance System Detecting sensor CAUTION OQX072040N [1] : Rear corner radar Refer to the picture above for the detailed location of the detecting sensors. 7-36 Take the following precautions to maintain optimal performance of the detecting sensor: • Never disassemble the rear corner radar or radar assembly, or cause any damage to it. • If the rear corner radar or near the radar has been damaged or impacted in any way even though the warning message does not appear on the cluster, Blind-Spot Collision Warning may not operate properly. Have the vehicle inspected by an authorized HYUNDAI dealer. • If the rear corner radars have been replaced or repaired, have the vehicle inspected by an authorized HYUNDAI dealer. • Use only genuine parts to repair the rear bumper where the rear corner radar is located. • Do not apply license plate frame or objects, such as a bumper sticker, film or a bumper guard near the rear corner radar. • Blind-Spot Collision Warning may not work properly if the bumper has been replaced, or the surroundings of the rear corner radar have been damaged or paint has been applied. • If a trailer, carrier, etc., is installed, it may adversely affect the performance of the rear corner radar or Blind-Spot Collision Warning may not operate. 07 Blind-Spot Collision Warning settings OTM070097N OQX072051N Blind-Spot Safety With the engine on, select or deselect ‘Driver Assistance → Driving Safety’ from the Settings menu to set whether or not to use each function. If ‘Blind-Spot Safety’ is selected, BlindSpot Collision Warning will warn you with a warning message, an audible warning and braking assist will be applied depending on the collision risk levels. When the engine is restarted with BlindSpot Collision Warning off, the ‘BlindSpot Safety System is Off’ message will appear on the cluster. If you change the Blind-Spot Safety setting from deselected to selected, the warning light on the outside rearview mirror will blink for three seconds. In addition, if the engine is turned on, when the Blind-Spot Safety is selected, the warning light on the outside rearview mirror will blink for three seconds. WARNING If ‘Blind-Spot Safety’ is deselected, the driver should always be aware of the surroundings and drive safely. Information If the engine is restarted, Blind-Spot Collision Warning will maintain the last setting. 7-37 Driver Assistance System Blind-Spot Collision Warning operation OUS4071201L OQX069036L OQX072057N Warning Methods With the engine on, select ‘User Settings → Driver Assistance → Warning Volume’ from the Settings menu in the cluster or select ‘Setup → Vehicle Settings → Driver Assistance → Warning Methods → Warning Volume’ from the Settings menu in the infotainment system to change the Warning Volume. CAUTION The setting of the Warning Volume applies to all functions of Blind-Spot Collision Warning. 7-38 Vehicle detection • To warn you a vehicle is detected, the warning light on the outside rearview mirror will illuminate. • Blind-Spot Collision Warning will operate when your vehicle speed is above 20 km/h and the speed of the vehicle in the blind spot area is above 10 km/h. Collision Warning • Collision warning will operate when the turn signal is turned on in the direction of the detected vehicle. • Collision warning will operate when your vehicle approaches the lane the blind spot vehicle is detected. • To warn you of a collision, the warning light on the outside rearview mirror will blink. At the same time, an audible warning will sound. • When the turn signal is turned off or you move away from the lane, the collision warning will be canceled and Blind-Spot Collision Warning will return to vehicle detection state. 07 WARNING • The detecting range of the rear corner radar is determined by a standard road width, therefore, on a narrow road, Blind-Spot Collision Warning may detect other vehicles two lanes over and warn you. In contrast, on a wide road, Blind-Spot Collision Warning may not be able to detect a vehicle driving in the next lane and may not warn you. • When the hazard warning flasher is on, the collision warning by the turn signal will not operate. Information • If the driver's seat is on the left side, the collision warning may occur when you turn left. Maintain a proper distance with the vehicles in the left lane. • The images and colors in the instrument cluster may differ depending on the cluster type or theme selected from the instrument cluster. Blind-Spot Collision Warning malfunction and limitations Blind-Spot Collision Warning malfunction OBR2072043BR When Blind-Spot Collision Warning is not working properly, the ‘Check BlindSpot Safety system(s)’ warning message will appear on the cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. WARNING Take the following precautions when using Blind-Spot Collision Warning: • For your safety, change the Settings after parking the vehicle at a safe location. • If any other system’s warning message is displayed or audible warning is generated, Blind-Spot Collision Warning’s warning message may not be displayed and audible warning may not be generated. • You may not hear the warning sound of Blind-Spot Collision Warning if the surrounding is noisy. 7-39 Driver Assistance System Blind-Spot Collision Warning disabled OBR2072044BR When the outside rearview mirror warning light is not working properly, the ‘Check side view mirror warning light’ warning message will appear on the cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. 7-40 OTM070098N When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Blind-Spot Collision Warning. If this occurs, the ‘Blind-Spot Safety system(s) disabled. Radar blocked’ warning message will appear on the cluster. Blind-Spot Collision Warning will operate properly when such foreign material or trailer, etc. is removed, and then the engine is restarted. If Blind-Spot Collision Warning does not operate properly after it is removed, have the vehicle inspected by an authorized HYUNDAI dealer. 07 WARNING • Even though the warning message does not appear on the cluster, Blind-Spot Collision Warning may not properly operate. • Blind-Spot Collision Warning may not properly operate in an area (for example, open terrain) where any objects are not detected right after the engine is turned on, or when the detecting sensor is blocked with foreign material right after the engine is turned on. CAUTION Turn off Blind-Spot Collision Warning to install or remove a trailer, carrier, or another attachment. Turn on Blind-Spot Collision Warning when finished. Limitations of Blind-Spot Collision Warning Blind-Spot Collision Warning may not operate properly, or it may operate unexpectedly under the following circumstances: • There is inclement weather such as heavy snow, heavy rain, etc. • The rear corner radar is covered with snow, rain, dirt, etc. • The temperature around the rear corner radar is high or low • Driving on a highway (or motorway) ramp • The road pavement (or the peripheral ground) abnormally contains metallic components (for example, possibly due to subway construction) • There is a fixed object near the vehicle, such as sound barriers, guardrails, central dividers, entry barriers, street lamps, signs, tunnels, walls, etc. (including double structures) • Driving in vast areas where there are few vehicles or structures (for example, desert, meadow, suburb, etc.) • Driving through a narrow road where trees or grass are overgrown • Driving on a wet road surface, such as a puddle on the road • The other vehicle drives very close behind your vehicle, or the other vehicle passes by your vehicle in close proximity • The speed of the other vehicle is very fast that it passes by your vehicle in a short time • Your vehicle passes by the other vehicle • Your vehicle changes lane • Your vehicle has started at the same time as the vehicle next to you and has accelerated 7-41 Driver Assistance System • The vehicle in the next lane moves two lanes away from you, or when the vehicle two lanes away moves to the next lane from you • A trailer, carrier or other attachment is installed around the rear corner radar • The bumper around the rear corner radar is covered with objects, such as a bumper sticker, bumper guard, bike rack, etc. • The bumper around the rear corner radar is impacted, damaged or the radar is out of position • Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc. Blind-Spot Collision Warning may not operate properly, or it may operate unexpectedly when the following objects are detected: • A motorcycle or bicycle is detected • A vehicle such as a flat trailer is detected • A big vehicle such as a bus or truck is detected • A moving obstacle such as a pedestrian, animal, shopping cart or a baby stroller is detected • A vehicle with low height such as a sports car is detected WARNING • Driving on a curved road OJX1079057 Blind-Spot Collision Warning may not operate properly when driving on a curved road. The function may not detect the vehicle in the next lane. Always pay attention to road and driving conditions while driving. OJX1079058 Blind-Spot Collision Warning may not operate properly when driving on a curved road. The function may recognize a vehicle in the same lane. Always pay attention to road and driving conditions while driving. 7-42 07 • Driving where the road is merging/ dividing • Driving on an inclined road OQX069038L OJX1079059 Blind-Spot Collision Warning may not operate properly when driving where the road merges or divides. The function may not detect the vehicle in the next lane. Always pay attention to road and driving conditions while driving. Blind-Spot Collision Warning may not operate properly when driving on a sloped road. The function may not detect the vehicle in the next lane or may incorrectly detect the ground or structure. Always pay attention to road and driving conditions while driving. • Driving where the heights of the lanes are different OQX069014L Blind-Spot Collision Warning may not operate properly when driving where the heights of the lanes are different. The function may not detect the vehicle on a road with different lane heights (underpass joining section, grade separated intersections, etc.). Always pay attention to road and driving conditions while driving. 7-43 Driver Assistance System WARNING • When you are towing a trailer or another vehicle, make sure that you turn off Blind-Spot Collision Warning. • Blind-Spot Collision Warning may not operate properly if interfered by strong electromagnetic waves. • Blind-Spot Collision Warning may not operate for 3 seconds after the vehicle is started, or the front view camera or rear corner radars are initialized. Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. 7-44 Information Radio frequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 in. (20 cm) between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 07 MANUAL SPEED LIMIT ASSIST (MSLA) (IF EQUIPPED) Manual Speed Limit Assist operation Setting speed limit ONX4OB071119 (1) Manual Speed Limit Assist enabled indicator (2) Set speed You can set the speed limit when you do not want to drive over a specific speed. If you drive over the preset speed limit, Manual Speed Limit Assist operates (set speed limit will blink and chime will sound) until the vehicle speed returns within the speed limit. OBR2072051BR 1. Press and hold Driving Assist button at the desired speed. The Manual ) Speed Limit Assist enabled ( indicator will illuminate on the cluster. 7-45 Driver Assistance System OBR2072052BR 2. Push the + switch up or - switch down, and release it at the desired speed. Push the + switch up or - switch down and hold it. The speed will increase or decrease to the nearest multiple of ten (or multiple of five) at first, and then increase or decrease by 10 (or 5). ONX4OB071120 3. The set speed limit will be displayed on the cluster. If you would like to drive over the preset speed limit, depress the accelerator pedal beyond the pressure point to activate the kickdown function. The set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit. Information When the accelerator pedal is not depressed beyond the pressure point, vehicle speed will maintain within the speed limit. 7-46 07 Temporarily pausing Manual Speed Limit Assist Turning off Manual Speed Limit Assist OBR2072054BR OBR2072051BR [A] : Type A, [B] : Type B [A] : Type A, [B] : Type B Press the switch to temporarily pause the set speed limit. The set speed limit will turn off but the Manual Speed ) indicator Limit Assist enabled ( will stay on. Press the Driving Assist button to turn Manual Speed Limit Assist off. The Manual Speed Limit Assist enabled ) indicator will go off. ( Resuming Manual Speed Limit Assist OBR2072052BR To resume Manual Speed Limit Assist after Manual Speed Limit Assist was switch. paused, operate the +, -, If you push the + switch up or – switch down, vehicle speed will be set to the current speed on the cluster. switch, vehicle If you press the speed will resume to the preset speed. WARNING Take the following precautions when using Manual Speed Limit Assist: • Always set the vehicle speed under the speed limit in your country. • Keep Manual Speed Limit Assist off when the function is not in use, to avoid inadvertently setting a speed. Check that the Manual Speed Limit ) indicator is Assist enabled ( off. • Manual Speed Limit Assist does not substitute for proper and safe driving. It is the responsibility of the driver to always drive safely and should always be aware of unexpected and sudden situations from occurring. Pay attention to the road conditions at all times. 7-47 Driver Assistance System DRIVER ATTENTION WARNING (DAW) (IF EQUIPPED) Basic function Driver Attention Warning can help determine the driver's attention level by analyzing driving pattern and driving time while the vehicle is driven. Driver Attention Warning will recommend a break when the driver’s attention level falls below a certain level. Leading Vehicle Departure Alert function Leading Vehicle Departure Alert function will inform the driver when a detected vehicle in front departs from a stop. Driver Attention Warning settings OBR2072055BR Detecting sensor OBR2072056BR OQX072027N [1] : Front view camera The front view camera is used to help detect driving patterns and front vehicle departure while vehicle is being driven. Refer to the picture above for the detailed location of the detecting sensor. CAUTION Always keep the front view camera in good condition to maintain optimal performance of Driver Attention Warning. For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA)” section in chapter 7. 7-48 Leading Vehicle Departure Alert With the engine on, select or deselect ‘Driver Assistance → Driver Attention Warning’ from the Settings menu to set whether or not to use each function. - If ‘Leading Vehicle Departure Alert’ is selected, the function will inform the driver when a detected vehicle in front departs from a stop. 07 Driver Attention Warning operation Basic function Display and warning The basic function of Driver Attention Warning is to warn the driver to ‘Consider taking a break’. Taking a break CAUTION • Driver Attention Warning may suggest a break depending on the driver’s driving pattern or habits, even if the driver doesn’t feel fatigued. • Driver Attention Warning is a supplemental function and may not be able to determine whether the driver is inattentive. • The driver who feels fatigued should take a break at a safe location, even though there is no break suggestion by Driver Attention Warning. Information OBR2072057BR For more details on setting the functions in the infotainment system Vehicle Settings, refer to “User settings mode” section in chapter 4. • The ‘Consider taking a break’ message will appear on the cluster and an audible warning will sound to suggest that the driver take a break, when the driver’s attention level is below certain level. • Driver Attention Warning will not suggest a break when the total driving time is shorter than 4 minutes has not passed after the last break was suggested. WARNING For your safety, change the Settings after parking the vehicle at a safe location. 7-49 Driver Assistance System Leading Vehicle Departure Alert function Driver Attention Warning malfunction and limitations Driver Attention Warning malfunction OQX072037N When a detected vehicle in front departs from a stop, Leading Vehicle Departure Alert will inform the driver by displaying the ‘Leading vehicle is driving away’ message on the cluster and an audible warning will sound. WARNING • If any other system’s warning message is displayed or audible warning is generated, Driver Attention Warning message may not be displayed and audible warning may not be generated. • The driver should hold the responsibility to safely drive and control the vehicle. CAUTION • Leading Vehicle Departure Alert is a supplemental function and may not alert the driver whenever the front vehicle departs from a stop. • Always check the front of the vehicle and road conditions before departure. Information • The images and colors in the instrument cluster may differ depending on the cluster type or theme selected from the instrument cluster. 7-50 OQX072052N When Driver Attention Warning is not working properly, the ‘Check Driver Attention Warning (DAW) system’ warning message will appear on the cluster will appear on the cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. 07 Limitations of Driver Attention Warning • When the vehicle ahead sharply steers Driver Attention Warning may not work properly in the following situations: • The vehicle is driven violently • The vehicle intentionally crosses over lanes frequently • The vehicle is controlled by Driver Assistance system, such as Lane Keeping Assist Leading Vehicle Departure Alert function • When the vehicle cuts in OADAS034 [A] : Your vehicle, [B] : Front vehicle If the vehicle in front makes a sharp turn, such as to turn left or right or make a U-turn, etc., Leading Vehicle Departure Alert may not operate properly. • When the vehicle ahead abruptly departures OADAS021 OADAS024 OADAS022 If the vehicle in front abruptly departures, Leading Vehicle Departure Alert may not operate properly. [A] : Your vehicle, [B] : Front vehicle If a vehicle cuts in front of your vehicle, Leading Departure Alert may not operate properly. 7-51 Driver Assistance System • When a pedestrian or bicycle is between your vehicle and the vehicle ahead • When driving at a tollgate or intersection, etc. OADAS026 OADAS025 If there is a pedestrian(s) or bicycle(s) in between your vehicle and the vehicle in front, Leading Vehicle Departure Alert may not operate properly. Information • When in a parking lot For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA)” section in chapter 7. OADAS027 If a vehicle parked in front drives away from you, Leading Vehicle Departure Alert may alert you that the parked vehicle is driving away. 7-52 If you pass a tollgate or intersection with lots of vehicles or you drive where lanes are merged or divided frequently, Leading Vehicle Departure Alert may not operate properly. 07 CRUISE CONTROL (CC) (IF EQUIPPED) Cruise Control operation Setting speed 1. Accelerate to the desired speed, which must be more than 25 mph (40 km/h). ONX4OB071056 (1) Cruise indicator (2) Set speed Cruise Control allows you to drive at speeds above 25 mph (40 km/h) without depressing the accelerator pedal. OBR2072051BR 2. Press the Driving Assist button at the desired speed. The set speed ) indicator will and Cruise ( illuminate on the cluster. 3. Release the accelerator pedal. Vehicle speed will maintain the set speed even when the accelerator pedal is not depressed. Information • The vehicle may slightly slow down or speed up while driving uphill or downhill. • The Driving Assist button symbol may vary depending on your vehicle option. 7-53 Driver Assistance System Increasing set speed Decreasing set speed OBR2072060BR • Push the + switch up and release it immediately. The set speed will increase by 1 mph (1 km/h) each time the switch is operated in this manner. • Push the + switch up and hold it while monitoring the set speed on the cluster. The set speed will increase to the nearest multiple of ten (multiple of five in mph) at first, and then increase by 5 mph (10 km/h) each time the switch is operated in this manner. Release the switch when the desired speed is shown and the vehicle will accelerate to that speed. OBR2072059BR • Push the - switch down and release it immediately. The set speed will decrease by 1 mph (1 km/h) each time the switch is operated in this manner. • Push the - switch down and hold it while monitoring the set speed on the cluster. The set speed will decrease to the nearest multiple of ten (multiple of five in mph) at first, and then decrease by 5 mph (10 km/h) each time the switch is operated in this manner. Release the switch at the speed you want to maintain. Accelerating temporarily If you want to speed up temporarily when Cruise Control is on, depress the accelerator pedal. To return to the set speed, take your foot off the accelerator pedal. If you push the + switch up or - switch down at increased speed, the set speed will be set to the current increased speed. 7-54 07 Temporarily pausing Cruise Control Resuming Cruise Control OBR2072061BR OBR2072062BR Cruise Control will be paused when: • Depressing the brake pedal. • Pressing the button. • Shifting the gear to N (Neutral). • Decreasing the vehicle speed to less than approximately 20 mph (30 km/h). • ESC (Electronic Stability Control) is operating. • Downshifting to the 2nd gear when in Manual Shift mode. Operate the +, - switch or button. If you push the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster. button, vehicle If you press the speed will resume to the preset speed. The vehicle speed must be above 20 mph (30 km/h) for Cruise Control to resume. The set speed will turn off but the Cruise ) indicator will stay on. ( Check the driving condition before button. Driving speed using the may sharply increase or decrease when button. you press the NOTICE WARNING If Cruise Control pauses during a situation that is not mentioned, have the vehicle inspected by an authorized HYUNDAI dealer. 7-55 Driver Assistance System Turning off Cruise Control WARNING OBR2072051BR Press the Driving Assist button to turn ) Cruise Control off. The Cruise ( indicator will go off. Always press the Driving Assist button to turn Cruise Control off when not in use. Information If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist button to turn off Cruise Control. However, Manual Speed Limit Assist will turn on. 7-56 Take the following precautions when using Cruise Control: • Always set the vehicle speed under the speed limit in your country. • Keep Cruise Control off when the function is not in use, to avoid inadvertently setting a speed. Check ) indicator is that the Cruise ( off. • Cruise Control does not substitute for proper and safe driving. It is the responsibility of the driver to always drive safely and should always be aware of unexpected and sudden situations from occurring. • Always drive cautiously to prevent unexpected and sudden situations from occurring. Pay attention to the road conditions at all times. • Do not use Cruise Control when it may be unsafe to keep the vehicle at a constant speed: - When driving in heavy traffic, or when traffic conditions make it difficult to drive at a constant speed - When driving on rainy, icy, or snow-covered roads - When driving on hilly or windy roads - When driving in windy areas - When driving with limited view (possibly due to bad weather, such as fog, snow, rain and sandstorm) • Do not use Cruise Control when towing a trailer. 07 REAR VIEW MONITOR (RVM) Rear View Monitor shows the area behind the vehicle to assist you when parking or backing up. Detecting sensor Rear View Parking Guide Lines If ‘Rear View Parking Guide Lines’ is selected, the rear view parking guide lines and rear top view guide lines will be displayed at the left side of the infotainment system screen. Information The horizontal guideline of the Rear View Parking Guidance shows the distance of 1.6 ft (0.5 m), 3.3 ft (1 m) and 7.6 ft (2.3 m) from the vehicle. OQX072054N [1] : Wide-rear view camera Refer to the picture above for the detailed location of the detecting sensor. Rear View Monitor settings Camera settings OQX072055N Warning Methods If ‘Parking Safety Priority’ is selected, the audio volume will temporarily decrease while Rear View Monitor is operating for safe parking. OQX072053N You can change Rear View Monitor ‘Display Contents’ or ‘Display Settings’ by touching the setup icon ( ) on the screen while Rear View Monitor is operating. If 'Display contents' is selected, you may set whether to use 'Rear View Parking Guide Lines' or 'Extended Rear View Monitor'. 7-57 Driver Assistance System Rear View Monitor operation Rear view Operating conditions • Shift the gear to R (Reverse), the image will appear on the screen. Off conditions • The rear view cannot be turned off when the gear is in R (Reverse). • Shift the gear from R (Reverse) to P (Park), the rear view will turn off. Extended Rear View Monitor The rear view will maintain showing on the screen to help you when parking. Operating conditions Shift the gear from R (Reverse) to N (Neutral) or D (Drive), the rear view will appear on the screen. Off conditions • When the vehicle speed is above 6 mph (10 km/h), the rear view will turn off. • Shift the gear to P (Park), the rear view will turn off. 7-58 Rear View Monitor malfunction and limitations Rear View Monitor malfunction When Rear View Monitor is not working properly, or the screen flickers, or the camera image does not display properly, have the vehicle inspected by an authorized HYUNDAI dealer. Limitations of Rear View Monitor When the vehicle is stopped for a long time in winter or when the vehicle is parked in an indoor parking lot, the exhaust fumes may temporarily blur the image. WARNING • The rear view camera does not cover the complete area behind the vehicle. The driver should always check the rear area directly through the inside and outside rearview mirror before parking or backing up. • The image shown on the screen may differ from the actual distance of the object. Make sure to directly check the vehicle's surroundings for safety. • Always keep the rear view camera lens clean. If the lens is covered with foreign material, it may adversely affect camera performance and Rear View Monitor may not operate properly. However, do not use chemical solvents such as strong detergents containing high alkaline or volatile organic solvents (gasoline, acetone etc.). This may damage the camera lens. 07 REAR CROSS-TRAFFIC COLLISION WARNING (RCCW) (IF EQUIPPED) Rear Cross-Traffic Collision Warning is designed to help detect vehicles approaching from the left and right side while your vehicle is reversing, and warn the driver that a collision is imminent with a warning message and an audible warning. Detecting sensor OQX072040N [1] : Rear corner radar Refer to the picture above for the detailed location of the detecting sensor. OQX072039N [A] : Rear Cross-Traffic Collision Warning operating range CAUTION CAUTION For more details on the precautions of the rear corner radar, refer to “BlindSpot Collision Warning (BCW)” section in chapter 7. The time of warning may vary depending on vehicle speed of the approaching vehicle. 7-59 Driver Assistance System Rear Cross-Traffic Collision Warning Settings Setting features OOS071115L OQX072056N Rear Cross-Traffic Safety With the engine on, select ‘Driver Assistance → Parking Safety → Rear Cross Traffic Safety’ from the Settings menu to turn on Rear Cross-Traffic Collision Warning and deselect to turn off the function. WARNING When the engine is restarted, Rear Cross-Traffic Collision Warning will always turn on. However, if Rear CrossTraffic Collision Warning is deselected after the engine is restarted, the driver should always be aware of the surroundings and drive safely. OQX072057N Warning Methods With the engine on, select ‘User Settings → Driver Assistance → Warning Volume’ from the Settings menu in the cluster or select ‘Setup → Vehicle Settings → Driver Assistance → Warning Methods → Warning Volume’ from the Settings menu in the infotainment system to change the Warning Volume. CAUTION The setting of the Warning Methods applies to all functions of the Rear Cross-Traffic Safety. Information If the engine is restarted, Warning Methods will maintain the last setting. 7-60 07 Rear Cross-Traffic Collision Warning Operation Warning and control Rear Cross-Traffic Safety system will warn the driver when a collision is imminent. • The function will operate when all the following conditions are satisfied: - The gear is shifted to R (Reverse) - Vehicle speed is below 5 mph (8 km/h) - The approaching vehicle is within approximately 82 ft. (25 m) from the left and right side of your vehicle - The speed of the vehicle approaching from the left and right is above 3 mph (5 km/h) Information OQX069036L If the operating conditions are satisfied, there will be a warning whenever the vehicle approaches from the left or right side even though your vehicle speed is 0 mph (0 km/h). OQX072041N OQX072042N Collision Warning • To warn the driver of an approaching vehicle from the rear left/right side of your vehicle, the outside rearview mirror will blink and a warning will appear on the cluster. At the same time, an audible warning will sound. If Rear View Monitor is operating, a warning will also appear on the infotainment system screen. 7-61 Driver Assistance System WARNING Take the following precautions when using Rear Cross-Traffic Safety system: • For your safety, only change the Settings after parking the vehicle at a safe location. • If any other function’s warning message is displayed or audible warning is generated, Rear CrossTraffic Safety system’s warning message may not be displayed and audible warning may not be generated. • You may not hear the warning sound of Rear Cross-Traffic Safety system if the surrounding is noisy. • Rear Cross-Traffic Safety system may warn the driver late or may not warn the driver depending on the road and driving conditions. • The driver has the responsibility to control the vehicle. Do not solely depend on Rear Cross-Traffic Safety system. Rather, maintain a safe braking distance, and if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle. Rear Cross-Traffic Collision Warning Malfunction and Limitation Rear Cross-Traffic Collision Warning malfunction OTM070125N When Rear Cross-Traffic Collision Warning is not working properly, the ‘Check Rear Cross-Traffic Safety system’ warning message will appear on the cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. OQX072058N When the side view mirror warning light is not working properly, the ‘Check side view mirror warning light’ warning message will appear on the cluster for several seconds, and the master ( ) warning light will illuminate on the cluster. If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer. 7-62 07 Rear Cross-Traffic Collision Warning disabled OTM070124N When the rear bumper around the rear corner radar or sensor is covered with foreign material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting performance and temporarily limit or disable Rear CrossTraffic Collision Warning. If this occurs, the ‘Rear Cross-Traffic Safety system disabled. Radar blocked’ warning message will appear on the cluster. Rear Cross-Traffic Collision Warning will operate properly when such foreign material or trailer, etc., is removed. If Rear Cross-Traffic Collision Warning does not operate properly after it is removed, have the vehicle inspected by an authorized HYUNDAI dealer. WARNING • Even though the warning message does not appear on the cluster, Rear Cross-Traffic Collision Warning may not operate properly. • Rear Cross-Traffic Collision Warning may not operate properly in an area (for example, open terrain), where any objects are not detected after turning ON the engine. CAUTION Turn off Rear Cross-Traffic Collision Warning to install a trailer, carrier, etc., or remove the trailer, carrier, etc., to use Rear Cross-Traffic Collision Warning. 7-63 Driver Assistance System Limitations of Rear Cross-Traffic Collision Warning Rear Cross-Traffic Collision Warning may not operate properly, or it may operate unexpectedly under the following circumstances: • Departing from where trees or grass are overgrown • Departing from where roads are wet • Speed of the approaching vehicle is fast or slow WARNING • Driving near a vehicle or structure Information For more details on the limitations of the rear corner radar, refer to “Blind-Spot Collision Warning (BCW)” section in chapter 7. 7-64 OQX072043N [A] : Structure Rear Cross-Traffic Collision Warning may be limited when driving near a vehicle or structure, and may not detect the vehicle approaching from the left or right. If this occurs, the function may not warn the driver when necessary. Always check your surroundings while backing up. 07 • When the vehicle is in a complex parking environment • When the vehicle is parked diagonally OQX072044N Rear Cross-Traffic Collision Warning may detect vehicles which are parking or pulling out near your vehicle (for example: a vehicle leaving beside your vehicle, a vehicle parking or pulling out in the rear area, a vehicle approaching your vehicle making a turn, etc.). If this occurs, the function may unnecessarily warn the driver. Always check your surroundings while backing up. OQX072045N [A] : Vehicle Rear Cross-Traffic Collision Warning may be limited when backing up diagonally, and may not detect the vehicle approaching from the left or right. If this occurs, the function may not warn the driver when necessary. Always check your surroundings while backing up. • When the vehicle is on or near a slope OQX072046N Rear Cross-Traffic Collision Warning may be limited when the vehicle is on a uphill or downhill slope, or near it, and may not detect the vehicle approaching from the left or right. If this occurs, the function may not warn the driver when necessary. Always check your surroundings while backing up. 7-65 Driver Assistance System • Pulling into the parking space where there is a structure • When the vehicle is parked rearward OQX072047N Rear Cross-Traffic Collision Warning may detect vehicles passing by behind you when parking in reverse into a parking space. If this occurs, the function may unnecessarily warn the driver. Always check your surroundings while backing up. OQX072048N [A] : Structure, [B] : Wall Rear Cross-Traffic Collision Warning may detect vehicles passing by in front of you when parking in reverse into a parking space with a wall or structure in the rear or side area. If this occurs, the function may unnecessarily warn the driver. Always check your surroundings while backing up. 7-66 WARNING • Rear Cross-Traffic Collision Warning may not operate properly if interfered by strong electromagnetic waves. • Rear Cross-Traffic Collision Warning may not operate for 3 seconds after the vehicle is started, or the rear corner radars are initialized. 07 DECLARATION OF CONFORMITY (IF EQUIPPED) The Radio Frequency Components (Rear Corner Radar) Complies: „ For USA OANATEL002 OANATEL003 7-67 8. Emergency Situations Hazard Warning Flasher.................................................................................... 8-2 In Case of an Emergency While Driving........................................................... 8-2 If the Engine Stalls While Driving.................................................................................8-2 If the Engine Stalls at a Crossroad or Crossing...........................................................8-2 If you Have a Flat Tire While Driving............................................................................8-3 If the Engine Will Not Start................................................................................ 8-3 If the Engine Doesn’t Turn Over or Turns Over Slowly................................................8-3 If the Engine Turns Over Normally but Doesn’t Start..................................................8-3 Jump Starting.................................................................................................... 8-4 If the Engine Overheats.....................................................................................8-6 Tire Pressure Monitoring System (TPMS) (Type A)...........................................8-7 TPMS Malfunction Indicator........................................................................................ 8-8 Changing a Tire with TPMS......................................................................................... 8-8 Tire Pressure Monitoring System (TPMS) (Type B).........................................8-10 Check Tire Pressure..................................................................................................... 8-10 Tire Pressure Monitoring System................................................................................ 8-11 Low Tire Pressure Telltale........................................................................................... 8-12 Low Tire Pressure Cluster Display with Position Indicator....................................... 8-12 TPMS Malfunction Indicator....................................................................................... 8-13 Changing a Tire with TPMS........................................................................................ 8-13 If you Have a Flat Tire (With Spare Tire)..........................................................8-15 Jack and Tools............................................................................................................. 8-15 Changing Tires............................................................................................................. 8-16 Towing............................................................................................................... 8-21 Towing Service............................................................................................................ 8-21 Removable Towing Hook............................................................................................8-22 Emergency Towing......................................................................................................8-23 Tie-down Hook............................................................................................................8-24 8 Emergency Situations HAZARD WARNING FLASHER IN CASE OF AN EMERGENCY WHILE DRIVING If the Engine Stalls While Driving OQXI069001 The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. To turn the hazard warning flasher on or off, press the hazard warning flasher button. The button is located in the center fascia panel. Both the left and right turn signal lights will flash simultaneously. • The hazard warning flasher operates whether your vehicle is running or not. • The turn signals do not work when the hazard flasher is on. 8-2 • Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. • Turn on your hazard warning flasher. • Try to start the engine again. If your vehicle will not start, contact an authorized HYUNDAI dealer or seek other qualified assistance. If the Engine Stalls at a Crossroad or Crossing If the engine stalls at a crossroads or crossing, if safe to do so, move the shift lever to the N (Neutral) position and then push the vehicle to a safe location. 08 If you Have a Flat Tire While Driving If a tire goes flat while you are driving: • Take your foot off the accelerator pedal and let the vehicle slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause loss of vehicle control resulting in an accident. When the vehicle has slowed to such a speed that it is safe to do so, brake carefully and pull off the road. Drive off the road as far as possible and park on firm, level ground. If you are on a divided highway, do not park in the median area between the two traffic lanes. • When the vehicle is stopped, press the hazard warning flasher button, move the shift lever into P (Park), and apply the parking brake, and place the ignition switch in the LOCK/OFF position. • Have all passengers get out of the vehicle. Be sure they all get out on the side of the vehicle that is away from traffic. • When changing a flat tire, follow the instructions provided later in this chapter. IF THE ENGINE WILL NOT START If the Engine Doesn’t Turn Over or Turns Over Slowly • Be sure the shift lever is in N (Neutral) or P (Park). The engine starts only when the shift lever is in N (Neutral) or P (Park). • Check the battery connections to be sure they are clean and tight. • Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is drained. Do not push or pull the vehicle to start it. This could cause damage to your vehicle. See instructions for “Jump Starting” provided in this chapter. CAUTION Push or pull starting the vehicle may cause the catalytic converter to overload which can lead to damage to the emission control system. If the Engine Turns Over Normally but Doesn’t Start Check the fuel level and add fuel if necessary. If the engine still does not start, have your vehicle checked by an authorized HYUNDAI dealer. 8-3 Emergency Situations JUMP STARTING Jump starting can be dangerous if done incorrectly. Follow the jump starting procedure in this section to avoid serious injury or damage to your vehicle. If in doubt about how to properly jump start your vehicle, we strongly recommend that you have a service technician or towing service do it for you. WARNING To prevent SERIOUS INJURY or DEATH to you or bystanders, always follow these precautions when working near or handling the battery: Always read and follow instructions carefully when handling a battery. Wear eye protection designed to protect the eyes from acid splashes. Keep all flames, sparks, or smoking materials away from the battery. Hydrogen is always present in battery cells, is highly combustible, and may explode if ignited. Keep batteries out of reach of children. Batteries contain sulfuric acid which is highly corrosive. Do not allow acid to contact your eyes, skin or clothing. If acid gets into your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention. If acid gets on your skin, thoroughly wash the area. If you feel pain or a burning sensation, get medical attention immediately. • When lifting a plastic-cased battery, excessive pressure on the case may cause battery acid to leak. Lift with a battery carrier or with your hands on opposite corners. • Do not attempt to jump start your vehicle if your battery is frozen. • NEVER attempt to recharge the battery when the vehicle’s battery cables are connected to the battery. • The electrical ignition system works with high voltage. NEVER touch these components with the engine running or when the ignition switch is in the ON position. Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations. NOTICE To prevent damage to your vehicle: • Only use a 12-volt power supply (battery or jumper system) to jump start your vehicle. • Do not attempt to jump start your vehicle by push-starting. WARNING While jump starting your vehicle, avoid the positive (+) and negative (-) cables to come in contact. A spark could cause personal injury. 8-4 08 Jump Starting Procedure 1. Position the vehicles close enough that the jumper cables will reach, but do not allow the vehicles to touch. 2. Avoid fans or any moving parts in the engine compartment at all times, even when the vehicles are turned off. 3. Turn off all electrical devices such as radios, lights, air conditioning, etc. Put the vehicles in P (Park) and set the parking brakes. Turn both vehicles OFF. CAUTION Before jump starting, make sure to correctly identify the positive (+) and negative (-) terminals to avoid reverse polarity connections. 8. Start the engine of the assisting vehicle and let it run at approximately 2,000 rpm for a few minutes. Then start your vehicle. If your vehicle will not start after a few attempts, it probably requires service. In this event please seek qualified assistance. If the cause of your battery discharging is not apparent, have your vehicle checked by an authorized HYUNDAI dealer. WARNING OQX079004N 4. Connect the jumper cables in the exact sequence shown in the illustration. First connect one jumper cable to the red, positive (+) jumper terminal of your vehicle (1). 5. Connect the other end of the jumper cable to the red, positive (+) battery/ jumper terminal of the assisting vehicle (2). 6. Connect the second jumper cable to the black, negative (-) battery/jumper terminal of the assisting vehicle (3). 7. Connect the other end of the second jumper cable to the black, negative (-) chassis ground of your vehicle (4). Do not allow the jumper cables to contact anything except the correct battery or jumper terminals or the correct ground. Do not lean over the battery when making connections. Do not connect the jumper cable to the negative (-) jumper terminal of the discharged battery. A spark could cause the battery to explode and lead to a personal injury or vehicle damage. Disconnect the jumper cables in the exact reverse order you connected them: 1. Disconnect the jumper cable from the black, negative (-) chassis ground of your vehicle (4). 2. Disconnect the other end of the jumper cable from the black, negative (-) battery/chassis ground of the assisting vehicle (3). 3. Disconnect the second jumper cable from the red, positive (+) battery/ jumper terminal of the assisting vehicle (2). 4. Disconnect the other end of the jumper cable from the red, positive (+) jumper terminal of your vehicle (1). 8-5 Emergency Situations IF THE ENGINE OVERHEATS If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine may be overheating. If this happens, you should: 1. Pull off the road and stop as soon as it is safe to do so. 2. Place the shift lever in P (Park) and set the parking brake. If the air conditioning is ON, turn it OFF. 3. If engine coolant is running out under the vehicle or steam is coming out from the hood, stop the engine. Do not open the hood until the coolant has stopped running or the steaming has stopped. If there is no visible loss of engine coolant and no steam, leave the engine running and check to be sure the engine cooling fan is operating. If the fan is not running, turn the engine off. WARNING While the engine is running, keep hands, clothing and tools away from the moving parts such as the cooling fan and drive belt to prevent serious injury. 4. Check for coolant leaking from the radiator, hoses or under the vehicle. (If the air conditioning had been in use, it is normal for cold water to be draining from it when you stop.) 5. If engine coolant is leaking out, stop the engine immediately and call the nearest authorized HYUNDAI dealer for assistance. 8-6 WARNING Your vehicle is equipped with a pressurized coolant reserve tank. NEVER remove the engine coolant reservoir tank/radiator cap or the drain plug while the engine and radiator are HOT. Hot coolant and steam may blow out under pressure, causing serious injury. Turn the engine off and wait until the engine cools down. Use extreme care when removing the engine coolant reservoir tank/radiator cap. Wrap a towel or thick rag around it, and turn it counterclockwise slowly to release some of the pressure from the system. Step back while the pressure is released. When you are sure all the pressure has been released, continue turning the cap counterclockwise to remove it. 6. If you cannot find the cause of the overheating, wait until the engine temperature has returned to normal. Then, if coolant has been lost, carefully add coolant to the reservoir to bring the fluid level in the reservoir up to the halfway mark. 7. Proceed with caution, keeping alert for further signs of overheating. If overheating happens again, call an authorized HYUNDAI dealer for assistance. CAUTION Serious loss of coolant indicates a leak in the cooling system and should be checked as soon as possible by an authorized HYUNDAI dealer. 08 TIRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED) (TYPE A) OQX069034L (1) Low Tire Pressure / TPMS Malfunction Indicator Lamp WARNING Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that may cause loss of vehicle control resulting in an accident. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period. Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure. If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires. As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. 8-7 Emergency Situations When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. NOTICE If any of the below happens, have the system checked by an authorized HYUNDAI dealer. 1. The Low Tire Pressure TPMS Malfunction Indicator does not illuminate for 3 seconds when the ignition switch is placed to the ON position or engine is running. 2. The TPMS Malfunction Indicator remains illuminated after blinking for approximately 1 minute. 3. The Low Tire Pressure cluster display remains illuminated CAUTION In winter or cold weather, the Low Tire Pressure Telltale may be illuminated if the tire pressure was adjusted to the recommended tire inflation pressure in warm weather. It does not mean your TPMS is malfunctioning because the decreased temperature leads to a proportional lowering of tire pressure. When you drive your vehicle from a warm area to a cold area or from a cold area to a warm area, or the outside temperature is greatly higher or lower, you should check the tire inflation pressure and adjust the tires to the recommended tire inflation pressure. 8-8 WARNING Low pressure damage Significantly low tire pressure makes the vehicle unstable and can contribute to loss of vehicle control and increased braking distances. Continued driving on low pressure tires can cause the tires to overheat and fail. TPMS Malfunction Indicator The TPMS Malfunction Indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. Have the system checked by an authorized HYUNDAI dealer as soon as possible. NOTICE The TPMS Malfunction Indicator may illuminate after blinking for one minute if the vehicle is near electric power supply cables or radio transmitters such as police stations, government and public offices, broadcasting stations, military installations, airports, transmitting towers, etc. Additionally, the TPMS Malfunction Indicator may illuminate if snow chains are used or electronic devices such as computers, chargers, remote starters, navigation, etc. This may interfere with normal operation of the TPMS. Changing a Tire with TPMS If you have a flat tire, the Low Tire Pressure indicator will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire. 08 CAUTION It is recommended that you do not use a puncture-repairing agent not approved by HYUNDAI dealer to repair and/or inflate a low pressure tire. Tire sealant not approved by HYUNDAI dealer may damage the tire pressure sensor. The spare tire does not come with a tire pressure monitoring sensor. When the low pressure tire or the flat tire is replaced with the spare tire, the TPMS Malfunction Indicator will illuminate after blinking for one minute if the vehicle is driven at speed above 15.5 MPH (25 km/h) for approximately 20 minutes. Once the original tire equipped with a tire pressure monitoring sensor is reinflated to the recommended pressure and reinstalled on the vehicle, the TPMS Malfunction Indicator will go off within a few minutes of driving. If the indicators do not disappear after a few minutes, please visit an authorized HYUNDAI dealer. Each wheel is equipped with a tire pressure sensor mounted inside the tire behind the valve stem (except for the spare tire). You must use TPMS specific wheels. It is recommended that you always have your tires serviced by an authorized HYUNDAI dealer. You may not be able to identify a tire with low pressure by simply looking at it. Always use a good quality tire pressure gauge to measure the tire’s inflation pressure. Please note that a tire that is hot (from being driven) will have a higher pressure measurement than a tire that is cold. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period. Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure. WARNING • The TPMS cannot alert you to severe and sudden tire damage caused by external factors such as nails or road debris. • If you feel any vehicle instability, immediately take your foot off the accelerator, apply the brakes gradually with light force, and slowly move to a safe position off the road. WARNING Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may interfere with the system’s ability to warn the driver of low tire pressure conditions and/or TPMS malfunctions. Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may void the warranty for that portion of the vehicle. Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 8-9 Emergency Situations TIRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED) (TYPE B) Check Tire Pressure OQX069034L OQX042018N OQX082060L (1) Low Tire Pressure / TPMS Malfunction Indicator Lamp (2) Low Tire Pressure / Tire Pressure Monitor / TPMS Malfunction Display (shown on the cluster cluster display) 8-10 • You can check the tire pressure in the Assist mode on the cluster. Refer to the “Cluster Display Mode” section in chapter 4. • A “Drive to display” message will appear for the first few minutes of driving after initial engine start up. If the tire pressure is not displayed after a few minutes of driving, check the tire pressures. • The displayed tire pressure values may differ from those measured with a tire pressure gauge. • You can change the tire pressure unit in the User Settings mode on the cluster. - psi, kpa, bar (Refer to the “User Settings Mode” section in chapter 4). 08 Tire Pressure Monitoring System WARNING Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that may cause loss of vehicle control resulting in an accident. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period. Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure. If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires. As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. NOTICE If any of the below happens, have the system checked by an authorized HYUNDAI dealer. 1. The Low Tire Pressure TPMS Malfunction Indicator does not illuminate for 3 seconds when the ignition switch is placed to the ON position or engine is running. 2. The TPMS Malfunction Indicator remains illuminated after blinking for approximately 1 minute. 3. The Low Tire Pressure cluster display remains illuminated 8-11 Emergency Situations Low Tire Pressure Telltale NOTICE The spare tire is not equipped with a tire pressure sensor. Low Tire Pressure Cluster Display with Position Indicator OQX042018N When the tire pressure monitoring system warning indicators are illuminated and the warning message is displayed on the cluster display, one or more of your tires is significantly underinflated. The cluster position indicator will indicate which tire is significantly under-inflated by illuminating the corresponding position light. If any of your tire pressures are indicated as being low, immediately reduce your speed, avoid hard cornering, and anticipate increased stopping distances. You should stop and check your tires as soon as possible. Inflate the tires to the proper pressure as indicated on the vehicle’s placard or tire inflation pressure label located on the driver’s side center pillar outer panel. If you cannot reach a service station or if the tire cannot hold the newly added air, replace the low pressure tire with the spare tire. (if equipped) The Low Tire Pressure cluster position indicator will remain on and the TPMS Malfunction Indicator may blink for one minute and then remain illuminated until you have the low pressure tire repaired and replaced on the vehicle. 8-12 CAUTION In winter or cold weather, the Low Tire Pressure Telltale may be illuminated if the tire pressure was adjusted to the recommended tire inflation pressure in warm weather. It does not mean your TPMS is malfunctioning because the decreased temperature leads to a proportional lowering of tire pressure. When you drive your vehicle from a warm area to a cold area or from a cold area to a warm area, or the outside temperature is greatly higher or lower, you should check the tire inflation pressure and adjust the tires to the recommended tire inflation pressure. WARNING Low pressure damage Significantly low tire pressure makes the vehicle unstable and can contribute to loss of vehicle control and increased braking distances. Continued driving on low pressure tires can cause the tires to overheat and fail. 08 TPMS Malfunction Indicator The TPMS Malfunction Indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. Have the system checked by an authorized HYUNDAI dealer as soon as possible. NOTICE If there is a malfunction with the TPMS, the individual tire pressures in the cluster display will not be available. Have the system checked by an authorized HYUNDAI dealer as soon as possible. NOTICE The TPMS Malfunction Indicator may illuminate after blinking for one minute if the vehicle is near electric power supply cables or radio transmitters such as police stations, government and public offices, broadcasting stations, military installations, airports, transmitting towers, etc. Additionally, the TPMS Malfunction Indicator may illuminate if snow chains are used or electronic devices such as computers, chargers, remote starters, navigation, etc. This may interfere with normal operation of the TPMS. Changing a Tire with TPMS If you have a flat tire, the Low Tire Pressure and cluster position indicator will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire. (if equipped) CAUTION It is recommended that you do not use a puncture-repairing agent not approved by HYUNDAI dealer to repair and/or inflate a low pressure tire. Tire sealant not approved by HYUNDAI dealer may damage the tire pressure sensor. The spare tire does not come with a tire pressure monitoring sensor. When the low pressure tire or the flat tire is replaced with the spare tire, the Low Tire Pressure cluster position indicator will remain on. Also, the TPMS Malfunction Indicator will illuminate after blinking for one minute if the vehicle is driven at speed above 15.5 MPH (25 km/h) for approximately 20 minutes. Once the original tire equipped with a tire pressure monitoring sensor is reinflated to the recommended pressure and reinstalled on the vehicle, the Low Tire Pressure cluster position indicator and TPMS Malfunction Indicator will go off within a few minutes of driving. If the indicators do not disappear after a few minutes, please visit an authorized HYUNDAI dealer. 8-13 Emergency Situations Each wheel is equipped with a tire pressure sensor mounted inside the tire behind the valve stem (except for the spare tire). You must use TPMS specific wheels. It is recommended that you always have your tires serviced by an authorized HYUNDAI dealer. You may not be able to identify a tire with low pressure by simply looking at it. Always use a good quality tire pressure gauge to measure the tire’s inflation pressure. Please note that a tire that is hot (from being driven) will have a higher pressure measurement than a tire that is cold. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period. Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure. WARNING • The TPMS cannot alert you to severe and sudden tire damage caused by external factors such as nails or road debris. • If you feel any vehicle instability, immediately take your foot off the accelerator, apply the brakes gradually with light force, and slowly move to a safe position off the road. 8-14 WARNING Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may interfere with the system’s ability to warn the driver of low tire pressure conditions and/or TPMS malfunctions. Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may void the warranty for that portion of the vehicle. Information This device complies with Part 15 of the FCC rules. Operation is subject to the following three conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 08 IF YOU HAVE A FLAT TIRE (WITH SPARE TIRE, IF EQUIPPED) WARNING Changing a tire can be dangerous. Follow the instructions in this section when changing a tire to reduce the risk of serious injury or death. CAUTION Be careful as you use the jack handle to stay clear of the flat end. The flat end has sharp edges that could cause cuts. OLF064031N Turn the winged hold down bolt counterclockwise to remove the spare tire. Store the spare tire in the same compartment by turning the winged hold down bolt clockwise. To prevent the spare tire and tools from “rattling”, store them in their proper location. Jack and Tools OQXI069004 (1) (2) (3) (4) Jack handle Jack Wheel lug nut wrench Towing hook The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment under the luggage box cover. The jack is provided for emergency tire changing only. OLF064005 If it is hard to loosen the tire hold-down wing bolt by hand, you can loosen it easily using the jack handle. 1. Put the jack handle (1) inside of the tire hold-down wing bolt. 2. Turn the tire hold-down wing bolt counterclockwise with the jack handle. 8-15 Emergency Situations Changing Tires WARNING A vehicle can slip or roll off of a jack causing serious injury or death to you or those nearby. Take the following safety precautions: • Never place any portion of your body under a vehicle that is supported by a jack. • NEVER attempt to change a tire in the lane of traffic. ALWAYS move the vehicle completely off the road on level, firm ground away from traffic before trying to change a tire. If you cannot find a level, firm place off the road, call a towing service for assistance. • Be sure to use the jack provided with the vehicle. • ALWAYS place the jack on the designated jacking positions on the vehicle and NEVER on the bumpers or any other part of the vehicle for jacking support. • Do not start or run the engine while the vehicle is on the jack. • Do not allow anyone to remain in the vehicle while it is on the jack. • Keep children away from the road and the vehicle. 8-16 Follow these steps to change your vehicle’s tire: 1. Park on a level, firm surface. 2. Move the shift lever into P (Park) or into R (Reverse) if equipped with a manual transmission, apply the parking brake, and place the ignition switch in the LOCK/OFF position. 3. Press the hazard warning flasher button. 4. Remove the wheel lug nut wrench, jack, jack handle, and spare tire from the vehicle. OQX069041L [A] : Block 5. Block both the front and rear of the tire diagonally opposite of the tire you are changing. 08 OQXI069007 6. Loosen the wheel lug nuts counterclockwise one turn each in the order shown above, but do not remove any lug nuts until the tire has been raised off of the ground. OQX079002L 7. Place the jack at the designated jacking position under the frame closest to the tire you are changing. The jacking positions are plates welded to the frame with two notches. Never jack at any other position or part of the vehicle. Doing so may damage the side seal molding or other parts of the vehicle. OQXI069009 8. Insert the jack handle into the jack and turn it clockwise, raising the vehicle until the tire clears the ground. Make sure the vehicle is stable on the jack. 9. Loosen the lug nuts with the wheel lug nut wrench and remove them with your fingers. Remove the wheel from the studs and lay it flat on the ground out of the way. Remove any dirt or debris from the studs, mounting surfaces, and wheel. 10. Install the spare tire onto the studs of the hub. 11. Tighten the lug nuts with your fingers onto the studs with the smaller end of the lug nuts closest to the wheel. 12. Lower the vehicle to the ground by turning the jack handle counterclockwise. 13. Use the wheel lug nut wrench to tighten the lug nuts in the order shown. Double-check each lug nut until they are tight. After changing tires, have an authorized HYUNDAI dealer tighten the lug nuts to their proper torque as soon as possible. The wheel lug nut should be tightened to 79~94 lbf·ft (11~13 kgf·m). 8-17 Emergency Situations CAUTION OQX079025N If you have a tire gauge, check the tire pressure (see “Tires and Wheels” in chapter 2 for tire pressure instructions.). If the pressure is lower or higher than recommended, drive slowly to the nearest service station and adjust it to the recommended pressure. Always reinstall the valve cap after checking or adjusting tire pressure. If the cap is not replaced, air may leak from the tire. If you lose a valve cap, buy another and install it as soon as possible. After changing tires, secure the flat tire and return the jack and tools to their proper storage locations. If it is hard to secure the flat tire, put the flat tire in the luggage compartment. NOTICE • Check the tire pressure as soon as possible after installing a spare tire. Adjust it to the recommended pressure. • Check and tighten the wheel lug nuts after driving over 30 miles (50 km), after the spare tire is installed. Recheck the tire wheel lug nuts after driving over 620 miles (1,000 km) after the replaced tire is reinstalled. 8-18 Your vehicle has metric threads on the studs and lug nuts. Make certain during tire changing that the same nuts that were removed are reinstalled. If you have to replace your lug nuts make sure they have metric threads to avoid damaging the studs and ensure the wheel is properly secured to the hub. Consult an authorized HYUNDAI dealer for assistance. If any of the equipment such as the jack, lug nuts, studs, or other equipment is damaged or in poor condition, do not attempt to change the tire and call for assistance. Use of compact spare tires Compact spare tires are designed for emergency use only. Drive carefully on the compact spare tire and always follow the safety precautions. WARNING To prevent compact spare tire failure and loss of control possibly resulting in an accident: • Use the compact spare tire only in an emergency. • NEVER operate your vehicle over 50 MPH (80 km/h). • Do not exceed the vehicle’s maximum load rating or the load carrying capacity shown on the sidewall of the compact spare tire. • Do not use the compact spare tire continuously. Repair or replace the original tire as soon as possible to avoid failure of the compact spare tire. 08 When driving with the compact spare tire mounted to your vehicle: • Check the tire pressure after installing the compact spare tire. The compact spare tire should be inflated to 60 psi (420 kPa). • Do not take this vehicle through an automatic car wash while the compact spare tire is installed. • Do not use the compact spare tire on any other vehicle because this tire has been designed especially for your vehicle. • The compact spare tire’s tread life is shorter than a regular tire. Inspect your compact spare tire regularly and replace worn compact spare tires with the same size and design, mounted on the same wheel. • Do not use more than one compact spare tire at a time. NOTICE When the original tire and wheel are repaired and reinstalled on the vehicle, the lug nut torque must be set correctly. The correct lug nut tightening torque is 79~94 lbf·ft (11~13 kgf·m). CAUTION To prevent damaging the compact spare tire and your vehicle: • Drive slowly enough for the road conditions to avoid all hazards, such as a potholes or debris. • Avoid driving over obstacles. The compact spare tire diameter is smaller than the diameter of a conventional tire and reduces the ground clearance approximately 1 inch (25 mm). • Do not use tire chains on the compact spare tire. Because of the smaller size, a tire chain will not fit properly. • Do not use the compact spare tire on any other wheels, nor should standard tires, snow tires, wheel covers or trim rings be used with the compact spare wheel. • Do not suddenly accelerate or decelerate (0 ~ 25 mph (0 ~ 40 km/h)) in any driving mode. It may cause leakage of transfer oil. 8-19 Emergency Situations Jack Label „ Example OHYK065011 The actual Jack label in the vehicle may differ from the illustration. For more detailed specifications, refer to the label attached to the jack. 1. Model Name 2. Maximum allowable load 3. When using the jack, set your parking brake. 4. When using the jack, stop the engine. 5. Do not get under a vehicle that is supported by a jack. 6. The designated locations under the frame 7. When supporting the vehicle, the base plate of jack must be vertical under the lifting point. 8-20 8. Shift into Reverse gear on vehicles with manual transmission or move the shift lever to the P (Park) position on vehicles with intelligent variable transmission. 9. The jack should be used on firm level ground. 10. Jack manufacture 11. Production date 12. Representative company and address 08 TOWING Towing Service CAUTION An AWD vehicle should never be towed with the wheels on the ground. This can cause serious damage to the transmission. CAUTION • Do not tow the vehicle with the front wheels on the ground as this may cause damage to the vehicle. A A OQXI069011 [A] : Dollies If emergency towing is necessary, have it done by an authorized HYUNDAI dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damage to the vehicle. The use of wheel dollies or flatbed is recommended. On 2WD vehicles, it is acceptable to tow the vehicle with the rear wheels on the ground (without dollies) and the front wheels off the ground. If any of the loaded wheels or suspension components are damaged or the vehicle is being towed with the front wheels on the ground, use a towing dolly under the front wheels. When being towed by a commercial tow truck and wheel dollies are not used, the front of the vehicle should always be lifted, not the rear. If your vehicle is an AWD vehicle, it must be towed with a wheel lift and dollies or flatbed equipment with all the wheels off the ground. OQXI069013 • Do not tow with sling-type equipment. Use a wheel lift or flatbed equipment. OQXI069014 • Do not tow the vehicle with four wheels in contact with the ground if it is the vehicle equipped with IVT. Otherwise, the transmission will be seriously damaged. Also, make sure not to tow the vehicle connecting it with other vehicles including camper vans. OQX079026N 8-21 Emergency Situations WARNING Removable Towing Hook If your vehicle is equipped with a rollover sensor, place the ignition switch in the LOCK/OFF or ACC position when the vehicle is being towed. The side impact and curtain air bag may deploy if the sensor detects the situation as a rollover. When towing your vehicle in an emergency without wheel dollies: 1. Place the ignition switch in the ACC position. 2. Place the shift lever in N (Neutral). 3. Release the parking brake. CAUTION Failure to place the shift lever in N (Neutral) when being towed with the front wheels on the ground can cause internal damage to the transmission. 8-22 OQX079003L 1. Open the liftgate, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the lower part of the cover on the front or rear bumper. 3. Install the towing hook by turning it clockwise into the hole until it is fully secured. 4. Remove the towing hook and install the cover after use. 08 Emergency Towing CAUTION „ Front The driver must be in the vehicle for steering and braking operations when the vehicle is being towed. Passengers other than the driver must not be in the vehicle. OQX079003L „ Rear OQX082059N If towing is necessary, have it done by an authorized HYUNDAI dealer or a commercial tow truck service. If towing service is not available in an emergency, your vehicle may be temporarily towed using a cable or chain secured to the emergency towing hook at the front (or rear) of the vehicle. Use extreme caution when towing the vehicle with a cable or chain. A driver must be in the vehicle to steer it and operate the brakes. Towing in this manner may be done only on hard-surfaced roads for a short distance and at low speeds. Also, the wheels, axles, power train, steering and brakes must all be in good working condition. Always follow these emergency towing precautions: • Place the ignition switch in the ACC position so the steering wheel is not locked (if equipped). • Place the shift lever in N (Neutral). • Release the parking brake. • Depress the brake pedal with more force than normal since you will have reduced braking performance. • More steering effort will be required because the power steering system will be disabled. • Use a vehicle heavier than your own to tow your vehicle. • The drivers of both vehicles should communicate with each other frequently. • Before emergency towing, check that the hook is not broken or damaged. • Fasten the towing cable or chain securely to the hook. • Do not jerk the hook. Apply steady and even force. 8-23 Emergency Situations NOTICE OQXI069018 • Use a towing cable or chain less than 16 feet (5 m) long. Attach a white or red cloth (about 12 inch (30 cm) wide) in the middle of the cable or chain for easy visibility. • Drive carefully so the towing cable or chain remains tight during towing. • Before towing, check intelligent variable transmission for fluid leaks under your vehicle. If the intelligent variable transmission fluid is leaking, flatbed equipment or a towing dolly must be used. NOTICE Accelerate or decelerate the vehicle in a slow and gradual manner while maintaining tension on the tow rope or chain to start or drive the vehicle, otherwise tow hooks and the vehicle may be damaged. 8-24 To avoid damage to your vehicle and vehicle components when towing: • Always pull straight ahead when using the towing hooks. Do not pull from the side or at a vertical angle. • Do not use the towing hooks to pull a vehicle out of mud, sand or other conditions from which the vehicle cannot be driven out under its own power. • Limit the vehicle speed to 10 MPH (15 km/h) and drive less than 1 mile (1.5 km) when towing to avoid serious damage to the intelligent variable transmission. Tie-down Hook WARNING Do not use the tie-down hook(s) for towing purposes. If the tiedown hook(s) are used for towing, the tie-down hook(s) or bumper will be damaged and this could lead to serious injury. 9. Maintenance Engine Compartment........................................................................................ 9-3 Maintenance Services....................................................................................... 9-4 Owner’s Responsibility................................................................................................ 9-4 Owner Maintenance Precautions................................................................................ 9-4 Owner Maintenance.......................................................................................... 9-5 Owner Maintenance Schedule.....................................................................................9-5 Scheduled Maintenance Services.....................................................................9-7 Normal Maintenance Schedule................................................................................... 9-8 Maintenance Under Severe Usage Conditions.......................................................... 9-11 Severe Driving Conditions........................................................................................... 9-11 Explanation of Scheduled Maintenance Items............................................... 9-12 Engine Oil..........................................................................................................9-15 Checking the Engine Oil Level.................................................................................... 9-15 Checking the Engine Oil and Filter............................................................................ 9-16 Engine Coolant.................................................................................................. 9-17 Checking the Engine Coolant Level............................................................................9-17 Changing Engine Coolant........................................................................................... 9-19 Brake/Clutch Fluid........................................................................................... 9-20 Checking the Brake/Clutch Fluid Level.................................................................... 9-20 Washer Fluid...................................................................................................... 9-21 Checking the Washer Fluid Level............................................................................... 9-21 Parking Brake.................................................................................................... 9-21 Checking the Parking Brake....................................................................................... 9-21 Air Cleaner........................................................................................................ 9-22 Filter Replacement......................................................................................................9-22 Climate Control Air Filter................................................................................. 9-23 Filter Inspection..........................................................................................................9-23 Wiper Blades.................................................................................................... 9-24 Blade Inspection.........................................................................................................9-24 Blade Replacement.....................................................................................................9-24 Battery.............................................................................................................. 9-26 For Best Battery Service............................................................................................. 9-27 Battery Recharging..................................................................................................... 9-27 Reset Features............................................................................................................. 9-27 9 Tires and Wheels.............................................................................................. 9-28 Tire Care.......................................................................................................................9-28 Recommended Cold Tire Inflation Pressures............................................................9-28 Check Tire Inflation Pressure......................................................................................9-29 Tire Rotation............................................................................................................... 9-30 Wheel Alignment and Tire Balance........................................................................... 9-30 Tire Replacement........................................................................................................ 9-31 Wheel Replacement....................................................................................................9-32 Tire Traction.................................................................................................................9-32 Tire Maintenance........................................................................................................9-32 Tire Sidewall Labeling.................................................................................................9-32 Tire Terminology and Definitions...............................................................................9-36 All Season Tires........................................................................................................... 9-38 Summer Tires............................................................................................................. 9-38 Snow Tires.................................................................................................................. 9-38 Radial-Ply Tires............................................................................................................9-39 Low Aspect Ratio Tires................................................................................................9-39 Fuses.................................................................................................................9-40 Instrument Panel Fuse Replacement......................................................................... 9-41 Engine Compartment Panel Fuse Replacement...................................................... 9-42 Fuse/Relay Panel Description................................................................................... 9-44 Light Bulbs.........................................................................................................9-51 Headlight, Parking Lamp, Daytime Running Light, Turn Signal Lamp, Cornering Lamp and Side Marker................................................................................................ 9-51 Side Repeater Lamp Replacement............................................................................9-55 Rear Combination Light Bulb Replacement............................................................. 9-56 High Mounted Stop Lamp Replacement.................................................................. 9-58 License Plate Light Bulb Replacement..................................................................... 9-58 Interior Light Bulb Replacement............................................................................... 9-59 Appearance Care.............................................................................................9-60 Exterior Care............................................................................................................... 9-60 Interior Care................................................................................................................ 9-64 Emission Control System.................................................................................9-66 9 Crankcase Emission Control System.........................................................................9-67 Evaporative Emission Control System Including Onboard Refueling Vapor Recovery (ORVR)..........................................................................................................................9-67 Exhaust Emission Control System..............................................................................9-67 California Perchlorate Notice..........................................................................9-69 Consumer Information.................................................................................... 9-70 Reporting Safety Defects................................................................................. 9-71 09 ENGINE COMPARTMENT The actual engine compartment in the vehicle may differ from the illustration. OQX089001L 1. 2. 3. 4. 5. Engine coolant reservoir Brake/clutch fluid reservoir Air cleaner Engine oil dipstick Engine oil filler cap 6. 7. 8. 9. Windshield washer fluid reservoir Fuse box Battery Engine coolant cap 9-3 Maintenance MAINTENANCE SERVICES You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Have your vehicle maintained and repaired by an authorized HYUNDAI dealer. An authorized HYUNDAI dealer meets HYUNDAI’s high service quality standards and receives technical support from HYUNDAI in order to provide you with a high level of service satisfaction. Owner’s Responsibility Maintenance service and record retention are the owner’s responsibility. You should retain documents that show proper maintenance has been performed on your vehicle in accordance with the scheduled maintenance service charts shown on the following pages. You need this information to establish your compliance with the servicing and maintenance requirements of your vehicle warranties. Detailed warranty information is provided in your Owner’s Handbook & Warranty Information booklet. Repairs and adjustments required as a result of improper maintenance or a lack of required maintenance are not covered. 9-4 Owner Maintenance Precautions Inadequate, incomplete or insufficient servicing may result in operational problems with your vehicle that could lead to vehicle damage, an accident, or personal injury. This chapter provides instructions only for the maintenance items that are easy to perform. Several procedures can be done only by an authorized HYUNDAI dealer with special tools. Your vehicle should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your vehicle and may, in addition, violate conditions of the limited warranties covering the vehicle. Certain modifications may also be in violation of regulations established by the U.S. Department of Transportation and other federal or state agencies. NOTICE Improper owner maintenance during the warranty period may affect warranty coverage. For details, read the separate Owner’s Handbook & Warranty Information booklet provided with the vehicle. If you’re unsure about any service or maintenance procedure, have it done by an authorized HYUNDAI dealer. 09 OWNER MAINTENANCE WARNING Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, have it done by an authorized HYUNDAI dealer. ALWAYS follow these precautions for performing maintenance work: • Park your vehicle on level ground, move the shift lever into the P (Park, for intelligent variable transmission vehicle) position, place the ignition switch in the LOCK/OFF position. • Block the tires (front and back) to prevent the vehicle from moving. Remove loose clothing or jewelry that can become entangled in moving parts. • If you must run the engine during maintenance, do so in an outdoor area or in an area with plenty of ventilation. • Keep flames, sparks, or smoking materials away from the battery and fuel-related parts. The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation of your vehicle. Any adverse conditions should be brought to the attention of your dealer as soon as possible. These Owner Maintenance vehicle checks are generally not covered by warranties and you may be charged for labor, parts and lubricants used. Owner Maintenance Schedule When You Stop for Fuel: • Check the coolant level in the engine coolant reservoir. • Check the windshield washer fluid level. • Check the for low or under-inflated tires. WARNING Be careful when checking your engine coolant level when the engine is hot. This may result in coolant being blown out of the opening and cause serious burns and other injuries. 9-5 Maintenance While Operating Your Vehicle: • Note any changes in the sound of the exhaust or any smell of exhaust fumes in the vehicle. • Check for vibrations in the steering wheel. Notice if there is any increased steering effort or looseness in the steering wheel, or change in its straight-ahead position. • Notice if your vehicle constantly turns slightly or “pulls” to one side when traveling on smooth, level road. • When stopping, listen and check for unusual sounds, pulling to one side, increased brake pedal travel or “hardto-push” brake pedal. • If any slipping or changes in the operation of your transmission occurs, check the transmission fluid level. • Check the intelligent variable transmission P (Park) function. • Check the parking brake. • Check for fluid leaks under your vehicle (water dripping from the air conditioning system during or after use is normal). At Least Monthly: • Check coolant level in the engine coolant reservoir. • Check the operation of all exterior lights, including the brake lights, turn signals and hazard warning flashers. • Check the inflation pressures of all tires including the spare for tires that are worn, show uneven wear, or are damaged. • Check for loose wheel lug nuts. 9-6 At Least Twice a Year: (for example, Every Spring And Autumn) • Check radiator, heater and air conditioning hoses for leaks or damage. • Check windshield washer spray and wiper operation. Clean wiper blades with a clean cloth dampened with washer a fluid. • Check headlight alignment. • Check muffler, exhaust pipes, shields and clamps. • Check the seat belts for wear and function. At Least Once a Year: • Clean body and door drain holes. • Lubricate door hinges and hood hinges. • Lubricate door and hood locks and latches. • Lubricate door rubber weather strips. • Lubricate door checker. • Check the air conditioning system. • Inspect and lubricate automatic transmission linkage and controls. • Clean the battery and terminals. • Check the brake fluid level. 09 SCHEDULED MAINTENANCE SERVICES Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, you must follow the Maintenance Under Severe Usage Conditions. • Repeated short distance driving. • Driving in dusty conditions or sandy areas. • Extensive use of brakes. • Driving in areas where salt or other corrosive materials are used. • Driving on rough or muddy roads. • Driving in mountainous areas. • Extended periods of idling or low speed operation. • Driving for a prolonged period in cold temperatures and/or extremely humid climates. • More than 50% driving in heavy city traffic during hot weather above 90°F (32°C). • Engine oil usage which is not recommended (Mineral type, Semi-synthetic, lower grade spec, etc.) For additional information or assistance see your authorized HYUNDAI dealer. NOTICE After 10 years or 100,000 miles, use severe maintenance schedule. Information • As it is normal for engine oil to be consumed during driving, the engine oil level should be checked on regular basis. • The engine oil change interval for normal operating conditions is based on the use of the recommended engine specification. If the recommended engine oil specification is not used, then replace the engine oil according to the maintenance schedule under severe operating conditions. 9-7 9-8 R R R 39 24 36 R 52 32 48 R 65 40 60 R 78 48 72 R 91 56 84 R 104 64 96 R 117 72 108 R 130 80 120 R 143 88 132 R I I I R I I Replace every 96,000 miles (156,000 km) I I R I I I I I I I I I I I I I I I I At first, inspect at 48,000 miles (78,000 km) or 72 months. Thereafter, inspect every 8,000 miles (13,000 km) or 12 months I R I I I I I R 169 104 156 I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change. *1 : Requires API SN PLUS (or above) grade engine oil. If a lower grade engine oil is used, then the engine oil and engine oil filter must be replaced at every 5,000 miles (8,000 km) or 6 months as indicated for severe maintenance condition. *2 : If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your authorized HYUNDAI dealer along with information on how to use them. Do not mix other additives. *3 : The drive belt should be replaced when cracks occur or tension is reduced excessively. Drive belts *3 I I I I Vacuum hose Battery condition R At first, replace at 120,000 miles (200,000 km) or 120 months. After that, replace every 24,000 miles (39,000 km) or 24 months R Engine coolant R R R Rotate tires every 8,000 miles (13,000 km) or 12 months I R 156 96 144 Add fuel additives every 8,000 miles (13,000 km) or 12 months 26 13 I 16 8 I 24 12 Cabin air filter (for evaporator and blower unit) Rotate Tires (includes tread wear inspection and tire pressure check) Spark plugs Air cleaner filter Fuel additives *2 Engine oil and engine oil filter *1 MAINTENANCE Months INTERVALS Miles×1,000 MAINTENANCE ITEM Km×1,000 Normal Maintenance Schedule Maintenance 26 I I I I I I 13 I I I I I I I Brake lines, hoses and connections Disc brakes and pads Steering gear rack, linkage and boots/ lower arm ball joint, upper arm ball joint Suspension mounting bolts Air conditioner refrigerant Air conditioner compressor I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change. Intelligent variable transmission fluid (If equipped) Exhaust pipe and muffler Driveshaft and boots 16 8 I I 24 12 MAINTENANCE Months INTERVALS Miles×1,000 MAINTENANCE ITEM Km×1,000 Normal Maintenance Schedule (CONT) I I I I I I I 39 24 36 I I I I I I I I 52 32 48 I I I I I I I I 78 48 72 I I I I I I I 91 56 84 I I I I I I I I 104 64 96 I I I I I I I 117 72 108 No check, No service required I I I I I I I 65 40 60 I I I I I I I I 130 80 120 I I I I I I I 143 88 132 I I I I I I I I 156 96 144 I I I I I I I 169 104 156 09 9-9 9-10 I I I I Fuel lines, hoses and connections Parking brake 65 40 60 I I I I I 78 48 72 91 56 84 I I I I I 104 64 96 117 72 108 I I I I I 130 80 120 143 88 132 I I I I I 156 96 144 169 104 156 I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change. *4 : The fuel filter is considered to be maintenance free but periodic inspection is recommended for this maintenance schedule depends on fuel quality. If there are some important safety matters like fuel flow restriction, surging, loss of power, hard starting problem etc, replace the fuel filter immediately regardless of maintenance schedule and consult an authorized HYUNDAI or KIA dealer for details. Inspect every 8,000 miles (13,000 km) or 12 months, Replace every 60,000 miles (96,000 km) or 48 months I I Brake fluid I I 52 Fuel filter *4 39 32 Fuel tank air filter *4 26 13 24 48 I 16 8 36 I 24 12 Vapor hose, fuel filler cap and fuel tank MAINTENANCE Months INTERVALS Miles×1,000 MAINTENANCE ITEM Km×1,000 Normal Maintenance Schedule (CONT) Maintenance 09 Maintenance Under Severe Usage Conditions The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. I: Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change. MAINTENANCE ITEM MAINTENANCE OPERATION MAINTENANCE INTERVALS DRIVING CONDITION Every 5,000 miles or A, B, C, D, E, F, 6 months G, H, I, J, K, L Engine oil and filter R Air cleaner filter R More frequently C, E Spark plugs R More frequently A, B, F, G, H, I, K Intelligent variable transmission fluid (If equipped) R Every 60,000 miles A, C, D, E, F, G, H, I, J Front brake disc/pads, calipers I More frequently C, D, G, H Rear brake shoes or disc/pads I More frequently C, D, G, F Parking brake I More frequently C, D, G, H Steering gear box, linkage & boots/lower arm ball joint, upper arm ball joint I More frequently C, D, E, F, G, H, I Drive shafts and boots I More frequently C, D, E, F, G, H, I, J Climate control air filter (for evaporator and blower unit) R More frequently C, E Severe Driving Conditions A. Repeatedly driving short distances of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature B. Extensive engine idling or low speed driving for long distances C. Driving on rough, dusty, muddy, unpaved, graveled or Salt-spread roads D. Driving in areas using salt or other corrosive materials or in very cold weather E. Driving in heavy dust conditions F. Driving in heavy traffic area over 90°F (32°C) G. Driving on uphill, downhill, or mountain road repeatedly H. Using for towing or camping, and driving with loads on the roof I. Driving as a patrol car, taxi, other commercial use or vehicle towing J. Frequently driving under high speed or rapid acceleration/deceleration K. Frequently driving in stop-and-go conditions L. Engine oil usage which is not recommended (Mineral type, Semisynthetic, lower grade spec, etc.) 9-11 Maintenance EXPLANATION OF SCHEDULED MAINTENANCE ITEMS Engine Oil and Filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required. Drive Belts Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessary. Drive belts should be checked periodically for proper tension and adjusted as necessary. Fuel Filter A clogged-up fuel filter may limit the vehicle driving speed, damage the emission system, and cause the hard starting. When a considerable amount of foreign substances are accumulated in the fuel tank, the fuel filter should be replaced. Upon installing a new fuel filter, operate the engine for several minutes, and check the connections for any leakages. Fuel filters should be installed by an authorized HYUNDAI dealer. 9-12 Fuel Lines, Fuel Hoses and Connections Check the fuel lines, fuel hoses and connections for leakage and damage. Have an authorized HYUNDAI dealer replace any damaged or leaking parts immediately. Vapor Hose and Fuel Filler Cap The vapor hose and fuel filler cap should be inspected at those intervals specified in the maintenance schedule. Make sure a new vapor hose or fuel filler cap is correctly replaced. Vacuum Crankcase Ventilation Hoses (if equipped) Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate deterioration. Particular attention should be paid to examine those hose surfaces nearest to high heat sources, such as the exhaust manifold. Inspect the hose routing to ensure that the hoses do not come in contact with any heat source, sharp edges or moving component which might cause heat damage or mechanical wear. Inspect all hose connections, such as clamps and couplings, to make sure they are secure, and that no leaks are present. Hoses should be replaced immediately if there is any evidence of deterioration or damage. 09 Air Cleaner Filter A genuine HYUNDAI air cleaner filter is recommended when the filter is replaced. Spark Plugs Make sure to install new spark plugs of the correct heat range. When assembling parts, be sure to wipe out foreign substances inside and outside of the boot bottom of the ignition coil and the insulator of the spark plug with a soft cloth to prevent contamination of the spark plug insulator. Cooling System Check cooling system components, such as radiator, coolant reservoir, hoses and connections for leakage and damage. Replace any damaged parts. Engine Coolant NOTICE Intelligent Variable Transmission (IVT) fluid color is basically light amber. As the vehicle is driven, the Intelligent Variable Transmission (IVT) fluid will begin to look darker. This is a normal condition and you should not judge the need to replace the fluid based upon the changed color. NOTICE The use of a non-specified fluid could result in transmission malfunction and failure. Use only the specified fluid (recommended Lubricants and Capacities is in chapter. 2). Brake Hoses and Lines Visually check for proper installation, chafing, cracks, deterioration and any leakage. Replace any deteriorated or damaged parts immediately. The coolant should be changed at the intervals specified in the maintenance schedule. Intelligent Variable Transmission (IVT) Fluid (if equipped) Intelligent Variable Transmission (IVT) fluid should not be checked under normal usage conditions. But in severe conditions, the fluid should be changed at an authorized HYUNDAI dealer in accordance to the scheduled maintenance at the beginning of this chapter. 9-13 Maintenance Brake/Clutch Fluid Suspension Mounting Bolts Check the brake fluid level in the brake fluid reservoir. The level should be between the MIN and the MAX marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 4 specification. Check the suspension connections for looseness or damage. Retighten to the specified torque. Parking Brake With the vehicle stopped and the engine off, check for excessive freeplay in the steering wheel. Check the linkage for bends or damage. Check the dust boots and ball joints for deterioration, cracks, or damage. Replace any damaged parts. Inspect the parking brake system including the parking brake pedal and cables. Brake Discs, Pads, Calipers and Rotors Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Exhaust Pipe and Muffler Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration, or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace parts as necessary. 9-14 Steering Gear Box, Linkage & Boots/Lower Arm Ball Joint Drive Shafts and Boots Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease. Air Conditioning Refrigerant Check the air conditioning lines and connections for leakage and damage. 09 ENGINE OIL Checking the Engine Oil Level Engine oil is used for lubricating, cooling, and operating various hydraulic components in the engine. Engine oil consumption while driving is normal, and it is necessary to check and refill the engine oil regularly. Also, check and refill the oil level within the recommended maintenance schedule to prevent deterioration of oil performance. Check the engine oil following the below procedure. 1. Follow all of the oil manufacturer’s precautions. 2. Be sure the vehicle is on the level ground in P (Park) with the parking brake set. If possible, block the wheels. 3. Turn the engine on and warm the engine up until the coolant temperature reaches a constant normal temperature. 4. Turn the engine off, remove the oil filler cap and pull the dipstick out. Wait for 15 minutes for the oil to return to the oil pan. 5. Wipe the dipstick clean and re-insert it fully. OQX089004L 7. If the oil level is below L, add enough oil to bring the level to F. Use only the specified engine oil. (refer to “Recommended Lubricants and Capacities” in chapter 2). NOTICE To prevent damage to your engine: • Do not spill engine oil when adding or changing engine oil. Wipe off spilled oil immediately. • The engine oil consumption may increase while you break in a new vehicle and it will be stabilized after driving 6,000 km (4,000 miles). • The engine oil consumption can be affected by driving habits, climate conditions, traffic conditions, oil quality, etc. Therefore, it is recommended that you inspect the engine oil level regularly and refill it if necessary. OQX089003L 6. Pull the dipstick out again and check the level. The level should be between F and L. 9-15 Maintenance Checking the Engine Oil and Filter OCN7092026 Have engine oil and filter changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter. WARNING CALIFORNIA PROPOSITION 65 WARNING Engine oil contains chemicals known to the State of California to cause cancer, birth defects and reproductive harm. Used engine oil may cause irritation or cancer of the skin if left in contact with the skin for prolonged periods of time. Always protect your skin by washing your hands thoroughly with soap and warm water as soon as possible after handling used oil. 9-16 09 ENGINE COOLANT The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season and before traveling to a colder climate. NOTICE • When the engine overheats from low engine coolant, suddenly adding engine coolant may cause cracks in the engine. To prevent damage, add engine coolant slowly in small quantities. • Do not drive with no engine coolant. It may cause water pump failure and engine seizure, etc. Checking the Engine Coolant Level If the coolant level is low, add enough distilled (deionized) water to bring the level to the F mark, but do not overfill. If frequent additions are required, see an authorized HYUNDAI dealer for a cooling system inspection. Recommended Engine Coolant • When adding coolant, use only distilled (deionized) water for your vehicle and never mix hard water in the coolant filled at the factory. • An improper coolant mixture can result in severe malfunction or engine damage. • The engine in your vehicle has aluminum engine parts and must be protected by an ethylene-glycol with phosphate based coolant to prevent corrosion and freezing. • Do not use alcohol or methanol coolant or mix them with the specified coolant. • Do not use a solution that contains more than 60% antifreeze or less than 35% antifreeze, which would reduce the effectiveness of the solution. OQX089005L Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between the F and the L marks on the side of the coolant reservoir when the engine is cool. 9-17 Maintenance For mixing percentage, refer to the following table: Ambient Temperature Mixture Percentage (volume) Antifreeze Water 5°F (-15°C) 35 65 -13°F (-25°C) 40 60 -31°F (-35°C) 50 50 -49°F (-45°C) 60 40 WARNING Information If in doubt about the mix ratio, a 50% water and 50% antifreeze mix is the easiest to mix together as it will be the same quantity of each. It is suitable to use for most temperature ranges of - 31°F and higher. WARNING Make sure the coolant cap is properly closed after refilling coolant. Otherwise the engine could be overheated while driving. „ Engine room front view OQX089006L 1. Check if the coolant cap label is straight In front. 2. Make sure that the tiny protrusions inside the coolant cap is securely interlocked. 9-18 OQX089005N Never remove the engine coolant reservoir tank/radiator cap or the drain plug while the engine and radiator are hot. Hot coolant and steam may blow out under pressure, causing serious injury. Turn the engine off and wait until the engine cools down. Use extreme care when removing the engine coolant reservoir tank/radiator cap. Wrap a thick towel around it, and turn it counterclockwise slowly to the first stop. Step back while the pressure is released from the cooling system. When you are sure all the pressure has been released, press down on the cap, using a thick towel, and continue turning counterclockwise to remove it. 09 WARNING The electric motor for the cooling fan may continue to operate or start up when the engine is not running and can cause serious injury. Keep hands, clothing and tools away from the rotating fan blades of the cooling fan. The electric motor for the cooling fan is controlled by engine coolant temperature, refrigerant pressure and vehicle speed. As the engine coolant temperature decreases, the electric motor will automatically shut off. This is a normal condition. If your vehicle is equipped with GDI, the electric motor for the cooling fan may begin to operate at any time and continue to operate until you disconnect the negative battery cable. Changing Engine Coolant Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter. WARNING Do not use engine coolant or antifreeze in the washer fluid reservoir. Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident. Engine coolant may also cause damage to paint and body trim. NOTICE To prevent damage to engine parts, put a thick towel around the radiator cap before refilling the coolant to prevent the coolant from overflowing into engine parts, such as the alternator. 9-19 Maintenance BRAKE/CLUTCH FLUID Checking the Brake/Clutch Fluid Level WARNING Do not allow brake fluid to come in contact with your eyes. If brake/clutch fluid comes in contact with your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention. NOTICE OQX089007L Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch fluid, clean the area around the reservoir cap thoroughly to prevent brake fluid contamination. If the level is low, add the specified brake/clutch fluid to the MAX level. The level will fall with accumulated mileage. This is a normal condition associated with the wear of the brake linings. If the fluid level is excessively low, have the brake/clutch system checked by an authorized HYUNDAI dealer. WARNING If the brake system requires frequent additions of fluid this could indicate a leak in the brake system. Have the vehicle inspected by an authorized HYUNDAI dealer. 9-20 • Do not allow brake fluid to contact the vehicle’s body paint, as paint damage will result. • Brake/clutch fluid, which has been exposed to open air for an extended time should NEVER be used as its quality cannot be guaranteed. It should be disposed of properly. • Do not use the wrong type of brake fluid. A few drops of mineral based oil, such as engine oil in your brake system can damage brake system parts. Information Use only the specified brake fluid (refer to “Recommended Lubricants and Capacities” in chapter 2). 09 WASHER FLUID PARKING BRAKE Checking the Washer Fluid Level Checking the Parking Brake OQX089008L Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing. WARNING To prevent serious injury or death, take the following safety precautions when using washer fluid: • Do not use engine coolant or antifreeze in the washer fluid reservoir. Engine coolant can severely obscure visibility when sprayed on the windshield and may cause loss of vehicle control resulting in an accident or damage to paint and body trim. • Do not allow sparks or flames to contact the washer fluid or the washer fluid reservoir. Washer fluid may contain alcohol and can be flammable. • Do not drink washer fluid and avoid contact with skin. Washer fluid is harmful to humans and animals. • Keep washer fluid away from children and animals. OQX069005L Check the stroke of the parking brake by counting the number of “clicks” heard while fully applying it from the released position. Also, the parking brake alone should securely hold the vehicle on a fairly steep grade. If the stroke is more or less than specified, have the parking brake adjusted by an authorized HYUNDAI dealer. Stroke : 6~7 clicks at a force of 44 lbs (20 kg, 196 N) 9-21 Maintenance AIR CLEANER Filter Replacement The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or to rinse it, as water will damage the filter. If soiled, the air cleaner filter must be replaced. OQX089041 4. Lock the cover with the cover attaching clips. 5. Check that the cover is firmly installed. Information OAD078142 1. Loosen the air cleaner cover attaching clips and open the cover. 2. Wipe the inside of the air cleaner. If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals (refer to “Maintenance Under Severe Usage Conditions” in this chapter). NOTICE OAD078143 3. Replace the air cleaner filter. 9-22 • Do not drive with the air cleaner filter removed. This will result in excessive engine wear. • When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result. • Use HYUNDAI genuine parts. Use of non-genuine parts could damage the air flow sensor. 09 CLIMATE CONTROL AIR FILTER Filter Inspection The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier. When you replace the climate control air filter, replace it performing the following procedure, and be careful to avoid damaging other components. OQX089045 OQX089046 OQX092001N 1. With the glove box open, push in both sides of the glove box as shown. This will ensure that the glove box stopper pins will get released from its holding location allowing the glove box to hang. 2. Open the climate control air filter cover (2) by pushing or pressing the clip (1) on the right and left side. OPD076026 3. Replace the climate control air filter. 4. Reassemble in the reverse order of disassembly. NOTICE Install a new climate control air filter in the correct direction with the arrow symbol (↓) facing downwards, otherwise, it may be noisy and the effectiveness of the filter may be reduced. 9-23 Maintenance WIPER BLADES Blade Inspection Blade Replacement Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wiper functionality. Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a clean cloth dampened with washer fluid. When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. NOTICE To prevent damage to the wiper blades, arms or other components, do not: • Use gasoline, kerosene, paint thinner, or other solvents on or near them. • Attempt to move the wipers manually. • Use non-specified wiper blades. Information Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. NOTICE To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually. NOTICE The use of a non-specified wiper blade could result in wiper malfunction and failure. NOTICE • In order to prevent damage to the hood and the wiper arms, the wiper arms should only be lifted when in the top wiping position. • Always return the wiper arms to the windshield before driving. Front Windshield Wiper Blade Replacement OGSR076067 1. Put the front windshield wipers into the service position. 2. Raise the wiper arm and slightly rotate the wiper blade assembly to expose the plastic locking clip. 9-24 09 NOTICE Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield. Rear Window Wiper Blade Replacement OTL075050 OGSR076066 OGSR076068 3. Press the clip (1) and slide the blade assembly downward (2). 4. Lift it off the arm. 5. Install the blade assembly in the reverse order of removal. 6. Return the wiper arm on the windshield. 1. Raise the wiper arm and pull out the wiper blade assembly. OTL075051 2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place. 3. Make sure the blade assembly is installed firmly by trying to pull it slightly. To prevent damage to the wiper arms or other components, have the wiper blades replaced by an authorized HYUNDAI dealer. 9-25 Maintenance BATTERY WARNING To prevent SERIOUS INJURY or DEATH to you or bystanders, always follow these precautions when working near or handling the battery: Always read and follow instructions carefully when handling a battery. Wear eye protection designed to protect the eyes from acid splashes. Keep all flames, sparks, or smoking materials away from the battery. Hydrogen is always present in battery cells, is highly combustible, and may explode if ignited. Keep batteries out of reach of children. Batteries contain sulfuric acid which is highly corrosive. Do not allow acid to contact your eyes, skin or clothing. If acid gets into your eyes, flush your eyes with clean water for at least 15 minutes and get immediate medical attention. If acid gets on your skin, thoroughly wash the area. If you feel pain or a burning sensation, get medical attention immediately. • When lifting a plastic-cased battery, excessive pressure on the case may cause battery acid to leak. Lift with a battery carrier or with your hands on opposite corners. • Do not attempt to jump start your vehicle if your battery is frozen. 9-26 • NEVER attempt to recharge the battery when the vehicle’s battery cables are connected to the battery. • The electrical ignition system works with high voltage. NEVER touch these components with the engine running or when the ignition switch is in the ON position. WARNING CALIFORNIA PROPOSITION 65 WARNING Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. Wash hands after handling. NOTICE Always follow these instructions when handling your vehicle’s battery to prevent damage to your battery: • When you do not use the vehicle for a long time in a low temperature area, disconnect the battery and keep it indoors. • Always charge the battery fully to prevent battery case damage in low temperature areas. • Prevent liquid from wetting the battery terminals. The performance of the battery may be degraded, and may cause injury. Be cautious when loading liquid in the trunk. • Do not tilt the battery. • If you connect unauthorized electronic devices to the battery, the battery may be discharged. Never use unauthorized devices. 09 For Best Battery Service OQX089042 • Keep the battery securely mounted. • Keep the battery top clean and dry. • Keep the terminals and connections clean, tight, and coated with petroleum jelly or terminal grease. • Rinse any spilled acid from the battery immediately with a solution of water and baking soda. Battery Recharging WARNING Always follow these instructions when recharging your vehicle’s battery to avoid the risk of SERIOUS INJURY or DEATH from explosions or acid burns: • Before performing maintenance or recharging the battery, turn off all accessories and place the ignition switch to the LOCK/OFF position. • Keep all flames, sparks, or smoking materials away from the battery. • Always work outdoors or in an area with plenty of ventilation. • Wear eye protection when checking the battery during charging. • The battery must be removed from the vehicle and placed in a well ventilated area. • Watch the battery during charging, and stop or reduce the charging rate if the battery cells begin boiling violently. • The negative battery cable must be removed first and installed last when the battery is disconnected. Disconnect the battery charger in the following order: 1. Turn off the battery charger main switch. 2. Unhook the negative clamp from the negative battery terminal. 3. Unhook the positive clamp from the positive battery terminal. • Always use a genuine HYUNDAI approved battery when you replace the battery. By Jump Starting After a jump start from a good battery, drive the vehicle for 20-30 minutes before it is shutoff. The vehicle may not restart if you shut it off before the battery had a chance to adequately recharge. See “Jump Starting” in chapter 7 for more information on jump starting procedures. Information An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations. Reset Features The following items may need to be reset after the battery has been discharged or the battery has been disconnected. See chapter 3 or 4 for: • Power Windows • Trip Computer • Climate Control System • Clock • Audio System • Sunroof 9-27 Maintenance TIRES AND WHEELS WARNING Tire failure may cause loss of vehicle control resulting in an accident. To reduce risk of SERIOUS INJURY or DEATH, take the following precautions: • Inspect your tires monthly for proper inflation as well as wear and damage. • The recommended cold tire pressure for your vehicle can be found in this manual and on the tire label located on the driver’s side center pillar. Always use a tire pressure gauge to measure tire pressure. Tires with too much or too little pressure wear unevenly causing poor handling. • Check the pressure of the spare every time you check the pressure of the other tires on your vehicle. • Replace tires that are worn, show uneven wear, or are damaged. Worn tires can cause loss of braking effectiveness, steering control, or traction. • ALWAYS replace tires with the same type, size, brand, construction and tread pattern as each tire that was originally supplied with this vehicle. Using tires and wheels other than the recommended sizes could cause unusual handling characteristics, poor vehicle control, or negatively affect your vehicle’s Anti-Lock Brake System (ABS) resulting in a serious accident. 9-28 Tire Care For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle. OQX089049N All specifications (sizes and pressures) can be found on a label attached to the driver’s side center pillar. Recommended Cold Tire Inflation Pressures All tire pressures (including the spare) should be checked when the tires are cold. “Cold tires” means the vehicle has not been driven for at least three hours or has been driven for less than one mile (1.6 km). Warm tires normally exceed recommended cold tire pressures by 4 to 6 psi (28 to 41 kPa). Do not release air from warm tires to adjust the pressure or the tires will be under-inflated. For recommended inflation pressure, refer to “Tire and Wheels” in chapter 2. 09 WARNING Recommended pressures must be maintained for the best ride, vehicle handling, and minimum tire wear. Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that could result in loss of vehicle control resulting in an accident. Severe under-inflation can lead to severe heat build-up, causing blowouts, tread separation and other tire failures that can result in the loss of vehicle control resulting in an accident. This risk is much higher on hot days and when driving for long periods at high speeds. CAUTION • Under-inflation results in excessive wear, poor handling and reduced fuel economy. Wheel deformation is also possible. Keep your tire pressures at the proper levels. If a tire frequently needs refilling, have it checked by an authorized HYUNDAI dealer. • Over-inflation produces a harsh ride, excessive wear at the center of the tire tread, and a greater possibility of damage from road hazards. Check Tire Inflation Pressure Check your tires, including the spare tire, once a month or more. How to Check Use a good quality tire pressure gauge to check tire pressure. You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated when they are under-inflated. Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire label located on the driver’s side center pillar or in this manual. No further adjustment is necessary. If the pressure is low, add air until you reach the recommended pressure. Make sure to put the valve caps back on the valve stems. Without the valve cap, dirt or moisture could get into the valve core and cause air leakage. If a valve cap is missing, install a new one as soon as possible. If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gauge. Be sure to put the valve caps back on the valve stems. Without the valve cap, dirt or moisture could get into the valve core and cause air leakage. If a valve cap is missing, install a new one as soon as possible. A cold tire means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period. Allow the tire to cool before measuring the inflation pressure. Always be sure the tire is cold before inflating to the recommended pressure. 9-29 Maintenance Tire Rotation To equalize tread wear, HYUNDAI recommends that the tires be rotated according to the maintenance schedule or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pressure, improper wheel alignment, out-of-balance wheels, severe braking or severe cornering. Look for bumps or bulges in the tread or side of the tire. Replace the tire if you find any of these conditions. Replace the tire if fabric or cord is visible. After rotation, be sure to bring the front and rear tire pressures to specification and check lug nut tightness (proper torque is 79~94 lbf·ft [11~13 kgf·m]). „ Without a spare tire ODH073802 Disc brake pads should be inspected for wear whenever tires are rotated. Information Tires that are asymmetrical or directional can only be installed on the wheel in one direction. The outside and inside of an asymmetrical tire is not easily distinguishable. Pay careful attention to the markings on the sidewalls of the tires, noting the “outside” marking and also the rotating direction before installing them on the vehicle. WARNING • Do not use the compact spare tire for tire rotation. • Do not mix bias ply and radial ply tires under any circumstances. This may cause unusual handling characteristics that may cause loss of vehicle control resulting in an accident. Wheel Alignment and Tire Balance The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tire wear or your vehicle pulling one way or the other, the alignment may need to be reset. If you notice your vehicle vibrating when driving on a smooth road, your wheels may need to be rebalanced. NOTICE Improper wheel weights can damage your vehicle’s aluminum wheels. Use only approved wheel weights. 9-30 09 Tire Replacement WARNING Tread wear indicator OLMB073027 If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 2/32 inch (1.6 mm) of tread left on the tire. Replace the tire when this happens. Do not wait for the tread surface to become level with the tread wear indicators before replacing the tire. To reduce the risk of DEATH or SERIOUS INJURY: • Replace tires that are worn, show uneven wear, or are damaged. Worn tires can cause loss of braking effectiveness, steering control, and traction. • Always replace tires with the same size as each tire that was originally supplied with this vehicle. Using tires and wheels other than the recommended sizes could cause unusual handling characteristics, poor vehicle control, or negatively affect your vehicle’s Anti-Lock Brake System (ABS) resulting in a serious accident. • Tires degrade over time, even when they are not being used. Regardless of the remaining tread, HYUNDAI recommends that tires be replaced after six (6) years of normal service. • When replacing tires, it is recommended to replace the two front or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If only replacing one pair of tires, it is recommended to install the pair of new tires on the rear axle. • Heat caused by hot climates or frequent high loading conditions can accelerate the aging process. Failure to follow this warning may cause sudden tire failure, which could lead to a loss of vehicle control resulting in an accident. 9-31 Maintenance Compact Spare Tire Replacement A compact spare tire has a shorter tread life than a regular size tire. Replace it when you can see the tread wear indicator bars on the tire. The replacement compact spare tire should be the same size and design tire as the one provided with your new vehicle and should be mounted on the same compact spare tire wheel. The compact spare tire is not designed to be mounted on a regular size wheel, and the compact spare tire wheel is not designed for mounting a regular size tire. WARNING The original tire should be repaired or replaced as soon as possible to avoid failure of the spare and loss of vehicle control resulting in an accident. The compact spare tire is for emergency use only. Do not operate your vehicle over 50 MPH (80 km/h) when using the compact spare tire. Wheel Replacement When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. Tire Traction Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when the tread depth is at least 2/32 inch (1.6 mm). To reduce the possibility of losing control, slow down whenever there is rain, snow or ice on the road. Tire Maintenance In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. When you have new tires installed, make sure they are balanced. This will increase vehicle ride comfort and tire life. Additionally, a tire should always be rebalanced if it is removed from the wheel. Tire Sidewall Labeling This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall. 9-32 09 Wheel size designation Wheels are also marked with important information that you need if you ever have to replace one. The following explains what the letters and numbers in the wheel size designation mean. Example wheel size designation: 6.0J X 15 OLMB073028 1. Manufacturer or Brand Name Manufacturer or brand name is shown. 2. Tire Size Designation A tire’s sidewall is marked with a tire size designation. You will need this information when selecting replacement tires for your car. The following explains what the letters and numbers in the tire size designation mean. Example tire size designation: (These numbers are provided as an example only; your tire size designator could vary depending on your vehicle.) 185/65/R15 88H 185 - Tire width in millimeters. 65 - Aspect ratio. The tire’s section height as a percentage of its width. R - Tire construction code (Radial). 15 - Rim diameter in inches. 88 - Load Index, a numerical code associated with the maximum load the tire can carry. H - Speed Rating Symbol. See the speed rating chart in this section for additional information. 6.0 - Rim width in inches. J - Rim contour designation. 15 - Rim diameter in inches. Tire speed ratings The chart below lists many of the different speed ratings currently being used for passenger vehicle tires. The speed rating is part of the tire size designation on the sidewall of the tire. This symbol corresponds to that tire’s designed maximum safe operating speed. Speed Rating Symbol S T H V W Y Maximum Speed 112 mph (180 km/h) 118 mph (190 km/h) 130 mph (210 km/h) 149 mph (240 km/h) 168 mph (270 km/h) 186 mph (300 km/h) 9-33 Maintenance 3. Checking Tire Life (TIN : Tire Identification Number) Any tires that are over six years old, based on the manufacturing date, (including the spare tire) should be replaced by new ones. You can find the manufacturing date on the tire sidewall (possibly on the inside of the wheel), displaying the DOT Code. The DOT Code is a series of numbers on a tire consisting of numbers and English letters. The manufacturing date is designated by the last four digits (characters) of the DOT code. DOT : XXXX XXXX OOOO The front part of the DOT shows a plant code number, tire size and tread pattern and the last four numbers indicate week and year manufactured. For example: DOT XXXX XXXX 1422 represents that the tire was produced in the 14th week of 2022. 4. Tire Ply Composition And Material The number of layers or plies of rubber-coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. The letter “R” means radial ply construction; the letter “D” means diagonal or bias ply construction; and the letter “B” means belted-bias ply construction. 9-34 5. Maximum Permissible Inflation Pressure This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure. Refer to the Tire and Loading Information label for recommended inflation pressure. 6. Maximum Load Rating This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same load rating as the factory installed tire. 7. Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: TREAD WEAR 200 TRACTION AA TEMPERATURE A 09 Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one-and-a-half times (1½) as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. These grades are molded on the sidewalls of passenger vehicle tires. The tires available as standard or optional equipment on your vehicle may vary with respect to grade. Traction AA, A, B & C The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Temperature A, B & C The temperature grades are A (the highest), B and C representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. Grade C responds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, over-inflation, or excessive loading, either separately or in combination, can cause heat build-up and possible sudden tire failure. This may cause loss of vehicle control resulting in an accident. 9-35 Maintenance Tire Terminology and Definitions Air Pressure The amount of air inside the tire pressing outward on the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight This means the combined weight of optional accessories. Some examples of optional accessories are automatic transmission, power seats, and air conditioning. Aspect Ratio The relationship of a tire’s height to its width. Belt A rubber coated layer of cords that is located between the plies and the tread. Cords may be made from steel or other reinforcing materials. Bead The tire bead contains steel wires wrapped by steel cords that hold the tire onto the rim. Bias Ply Tire A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread. Cold Tire Pressure The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat from driving. Curb Weight This means the weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil and coolant, but without passengers and cargo. 9-36 DOT Markings A code molded into the sidewall of a tire signifying that the tire is in compliance with the U.S. Department of Transportation motor vehicle safety standards. The DOT code includes the Tire Identification Number (TIN), an alphanumeric designator which can also identify the tire manufacturer, production plant, brand and date of production. GVWR Gross Vehicle Weight Rating GAWR FRT Gross Axle Weight Rating for the Front Axle. GAWR RR Gross Axle Weight Rating for the Rear axle. Intended Outboard Sidewall The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa) The metric unit for air pressure. Light Truck (LT) Tire A tire designated by its manufacturer as primarily intended for use on lightweight trucks or multipurpose passenger vehicles. Load Ratings The maximum load that a tire is rated to carry for a given inflation pressure. Load Index An assigned number ranging from 1 to 279 that corresponds to the load carrying capacity of a tire. 09 Maximum Inflation Pressure The maximum air pressure to which a cold tire may be inflated. The maximum air pressure is molded onto the sidewall. Maximum Load Rating The load rating for a tire at the maximum permissible inflation pressure for that tire. Maximum Loaded Vehicle Weight The sum of curb weight; accessory weight; vehicle capacity weight; and production options weight. Normal Occupant Weight The number of occupants a vehicle is designed to seat multiplied by 150 pounds (68 kg). Occupant Distribution Designated seating positions. Outward Facing Sidewall An asymmetrical tire has a particular side that faces outward when mounted on a vehicle. The outward facing sidewall bears white lettering or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same moldings on the inner facing sidewall. Passenger (P-Metric) Tire A tire used on passenger cars and some light duty trucks and multipurpose vehicles. Ply A layer of rubber-coated parallel cords. Pneumatic Tire A mechanical device made of rubber, chemicals, fabric and steel or other materials, that, when mounted on an automotive wheel provides the traction and contains the gas or fluid that sustains the load. Pneumatic Options Weight The combined weight of installed regular production options weighing over 5 lb. (2.3 kg) in excess of the standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty breaks, ride levelers, roof rack, heavy duty battery, and special trim. Recommended Inflation Pressure Vehicle manufacturer’s recommended tire inflation pressure as shown on the tire placard. Radial Ply Tire A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim A metal support for a tire and upon which the tire beads are seated. Sidewall The portion of a tire between the tread and the bead. Speed Rating An alphanumeric code assigned to a tire indicating the maximum speed at which a tire can operate. Traction The friction between the tire and the road surface. The amount of grip provided. 9-37 Maintenance Tread The portion of a tire that comes into contact with the road. Treadwear Indicators Narrow bands, sometimes called “wear bars”, that show across the tread of a tire when only 1/16 inch of tread remains. UTQGS Uniform Tire Quality Grading Standards is a tire information system that provides consumers with ratings for a tire’s traction, temperature and treadwear. Ratings are determined by tire manufacturers using government testing procedures. The ratings are molded into the sidewall of the tire. Vehicle Capacity Weight The number of designated seating positions multiplied by 150 lbs. (68 kg) plus the rated cargo and luggage load. Vehicle Maximum Load on the Tire Load on an individual tire due to curb and accessory weight plus maximum occupant and cargo weight. Vehicle Normal Load on the Tire Load on an individual tire that is determined by distributing to each axle its share of the curb weight, accessory weight, and normal occupant weight and dividing by 2. Vehicle Placard A label permanently attached to a vehicle showing the original equipment tire size and recommended inflation pressure. 9-38 All Season Tires HYUNDAI specifies all season tires on some models to provide good performance for use all year round, including snowy and icy road conditions. All season tires are identified by ALL SEASON and/ or M+S (Mud and Snow) on the tire sidewall. Snow tires have better snow traction than all season tires and may be more appropriate in some areas. Summer Tires HYUNDAI specifies summer tires on some models to provide superior performance on dry roads. Summer tire performance is substantially reduced in snow and ice. Summer tires do not have the tire traction rating M+S (Mud and Snow) on the tire side wall. If you plan to operate your vehicle in snowy or icy conditions, HYUNDAI recommends the use of snow tires or all season tires on all four wheels. Snow Tires If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor handling may result. Snow tires should carry 4 psi (28 kPa) more air pressure than the pressure recommended for the standard tires on the tire label on the driver’s side of the center pillar, or up to the maximum pressure shown on the tire sidewall, whichever is less. Do not drive faster than 75 mph (120 km/h) when your vehicle is equipped with snow tires. 09 Radial-Ply Tires Radial-ply tires provide improved tread life, road hazard resistance and smoother high speed ride. The radialply tires used on this vehicle are of belted construction, and are selected to complement the ride and handling characteristics of your vehicle. Radial-ply tires have the same load carrying capacity, as bias-ply or bias belted tires of the same size, and use the same recommended inflation pressure. Mixing of radial-ply tires with bias-ply or bias belted tires is not recommended. Any combinations of radial-ply and bias-ply or bias belted tires when used on the same vehicle will seriously deteriorate vehicle handling. The best rule to follow is: Identical pairs of radial-ply tires should always be used as a set for the front tires and a set for the rear tires. Longer wearing tires can be more susceptible to irregular tread wear. It is very important to follow the tire rotation interval in this chapter to achieve the tread life potential of these tires. Cuts and punctures in radial-ply tires are repairable only in the tread area, because of sidewall flexing. Consult your tire dealer for radial-ply tire repairs. WARNING Do not mix bias ply and radial ply tires under any circumstances. This may cause unusual handling characteristics that may cause loss of vehicle control resulting in an accident. Low Aspect Ratio Tires The aspect ratio is lower than 50 on low aspect ratio tires. Because low aspect ratio tires are optimized for handling and braking, their sidewall is a little stiffer than a standard tire. Also low aspect ratio tires tend to be wider and consequently have a greater contact patch with the road surface. In some instances they may generate more road noise compared with standard tires. CAUTION Because the sidewall of a low aspect ratio tire is shorter than a standard tire, the rim of the wheel and the tire itself is more easily susceptible to damage. Use caution when driving and follow the guidelines below to help minimize damage to the wheel and tire: • When driving on a rough road or off road, drive cautiously because tires and wheels may be damaged. And after driving, inspect tires and wheels. • When passing over a pothole, speed bump, manhole, or curb stone, drive slowly so that the tires and wheels are not damaged. • If the tire is subjected to a severe impact, have the tire and wheel inspected by an authorized HYUNDAI dealer. • Inspect the tire condition and pressure every 1,800 miles (3,000km). CAUTION • It is not easy to recognize tire damage with your own eyes. But if there is the slightest hint of tire damage, have the tire checked or replaced because the tire damage may cause air leakage from the tire. • If the tire is damaged by driving on a rough road, off road, pothole, manhole, or curb stone, it will not be covered by the warranty. 9-39 Maintenance FUSES ■ Blade type Normal Blown ■ Cartridge type If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating. If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized HYUNDAI dealer. WARNING Normal Blown ■ Multi fuse NEVER replace a fuse with anything but another fuse of the same rating. • A higher capacity fuse could cause damage and possibly cause a fire. • Do not install a wire or aluminum foil instead of the proper fuse even as a temporary repair. It may cause extensive wiring damage and possibly a fire. NOTICE Normal Blown OTM078035 A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken. 9-40 Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system. 09 Instrument Panel Fuse Replacement OQX089024L 1. 2. 3. 4. Turn the engine off. Turn all other switches OFF. Open the fuse panel cover. Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location. 7. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer. In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle. If the headlights or other electrical components do not work and the fuses are undamaged, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with the same rating. Fuse Switch OQX089036L OQXI079022 5. Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel. 6. Check the removed fuse; replace it if it is blown. Spare fuses are provided in the instrument panel fuse panels (or in the engine compartment fuse panel). Always, place the fuse switch to the ON position. If you move the switch to the OFF position, some items such as the audio system and digital clock must be reset and the smart key may not work properly. 9-41 Maintenance Engine Compartment Panel Fuse Replacement „ Blade type fuse OQX089038L „ Cartridge type fuse OQX089039L 1. Turn the engine off. 2. Turn all other switches OFF. 3. Remove the fuse panel cover by pressing the tap and pulling up. 4. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel. 5. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized HYUNDAI dealer. 9-42 CAUTION After checking the fuse box in the engine compartment securely close the fuse box cover inside the engine compartment, until it clicks. If the fuse box is not closed properly, water may leak in side, possibly causing a malfunction with the electrical system. 09 Main Fuse Multi Fuse OQXI079025 OQX089047N If the main fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the fuse panel cover by pressing the tab and pulling it up. 4. Remove the nuts shown in the picture above. 5. Replace the fuse with a new one of the same rating. 6. Reinstall in the reverse order of removal. If the multi fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the fuse panel cover by pressing the tab and pulling it up. 4. Remove the nuts shown in the picture above. 5. Replace the fuse with a new one of the same rating. 6. Reinstall in the reverse order of removal. Information If the main fuse is blown, consult an authorized HYUNDAI dealer. Information If the multi fuse is blown, consult an authorized HYUNDAI dealer. 9-43 Maintenance Fuse/Relay Panel Description Instrument Panel Fuse Panel Information Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label. OQX089024L Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/ relay names and ratings. OQX089053N 9-44 09 Instrument panel fuse panel Fuse Name (A) Circuit Protected POWER OUTLET 3 20A USB Charger INTERIOR LAMP 10A Front Vanity Lamp LH/RH, Room Lamp, Map Lamp HEATED MIRROR 10A Driver/Passenger Power Outside Mirror, A/C Control Module P/WINDOW LH 25A Power Window Main Switch FCA 10A Forward Collision Avoidance Assist Unit POWER OUTLET 2 20A Front Power Outlet IBU 1 15A IBU MULTIMEDIA 20A Audio, A/V & Navigation Head Unit SAFETY P/ WINDOW 25A Driver Safety Power Window Module P/WINDOW RH 25A Power Window Main Switch, Passenger Power Window Switch TCU2 15A Transaxle Range Switch, Back-Up Lamp Switch BRAKE SWITCH 10A IBU, Stop Lamp Switch MEMORY 1 10A Instrument Cluster, A/C Control Module START 7.5A [M/T] ECM, IBU, [IVT] Transmission Range Switch 9-45 Maintenance Driver’s side fuse panel Fuse Name (A) S/HEATER 20A Front Seat Warmer Control Module MODULE 1 7.5A Stop Lamp Switch, ATM Shift Lever MEMORY 2 7.5A SRS Control Module AIR BAG 10A Passenger Occupant Detection Sensor, SRS Control Module DOOR LOCK 20A Tail Gate Relay, T/Turn Unlock Realy, Door Lock/Unlock Realy ECU 6 10A ECM, PCM DRL 10A DRL Relay MODULE 6 10A Data Link Connector, Key Interlock Solenoid T/SIGNAL LAMP 15A IBU MODULE 2 10A Crash Pad Switch, Multifunction Camera Unit, Blind Spot Collision Warning Unit LH/RH SUNROOF 15A Sunroof Motor MODULE 3 7.5A Console Switch, ATM Shift Lever Indicator, A/C Control Module, Audio, Front Seat Warmer Control Module 9-46 Circuit Protected 09 Driver’s side fuse panel Fuse Name (A) Circuit Protected WIPER RR 15A E/R Junction Block (Wiper RR Relay), Rear Wiper Motor WASHER 15A Multifunction Switch A/BAG IND 7.5A Center Facia Switch, Instrument Cluster IBU 2 7.5A IBU ABS3 7.5A E/R Junction Block (Multipurpose Check Connector), ESC Module WIPER FRT 25A E/R Junction Block (Wiper FRT Low Relay), Front Wiper Motor A/C 2 7.5A E/R Junction Block (Blower Relay), A/C Control Module HEATED STEERING 15A Not Used CLUSTER 7.5A Instrument Cluster MODULE 7 10A Power Outlet Relay, Power Outside Mirror Switch, IBU, Audio, A/V & Navigation Head Unit MDPS 2 7.5A MDPS Unit MODULE 5 10A IBU, Front Seat Warmer Control Module MODULE 4 7.5A IBU A/C 3 7.5A Blower Motor, A/C Control Module 9-47 Maintenance Engine Compartment Fuse Panel Information Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label. OQXI079024 Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/ relay names and ratings. OQX089054N 9-48 09 Engine compartment fuse panel Fuse Name MULTI FUSE FUSE (A) Circuit Protected ALT 125A Alternator, Multi Fuse - MDPS 1, Fuse - Rear Heated, Blower, ABS 1, ABS 2 MDPS 1 80A MDPS Unit REAR HEATED 40A ICU Junction Block (Rear Heated Relay) ABS 1 40A Multipurpose Check Connector, ESC Module ABS 2 40A ESC Module BLOWER 40A Blower Relay WIPER 10A Wiper FRT LO Realy, IBU ECU2 15A ECM/PCM ECU4 15A ECM/PCM ECU5 15A ECM/PCM IGN COIL 20A Ignition Coil #1~#4 INJECTOR 15A ECM/PCM, Injector #1~#4, Fuel Pump Relay PTC HEATER 50A PTC Heater Relay B+3 50A ICU Junction Block (Fuse - DOOR LOCK, S/HEATER, SAFETY P/WINDOW, SUNROOF, Power Window Relay) IG2 40A Start Relay, PDM Relay Box (IG2 Relay), Ignition Switch 9-49 Maintenance Engine compartment fuse panel Fuse Name FUSE 9-50 (A) Circuit Protected COOLING FAN 40A Cooling Fan 1/2 Relay B+4 40A ICU Junction Block (Fuse - MODULE 6, BRAKE SWITCH, T/SIGNAL LAMP, DRL, IBU 1, Leak Current Autocut Device) ECU1 30A Main Relay, Fuse - ECU 4, ECU 5 A/C 1 10A A/C Relay FUEL PUMP 20A Fuel Pump Relay HORN 15A Horn Relay B+2 30A ICU Junction Block (IPS (5CH) E-SWITCH, IPS (2CH)) IG1 30A [With Smart Key] PDM Relay Box (IG1 Relay) [W/O Smart Key] Ignition Switch POWER OUTLET 1 40A ICU Junction Block (Power Outlet Relay) B+1 30A ICU Junction Block (IPS (5CH) E-SWITCH, IPS (1CH)) 09 LIGHT BULBS Consult an authorized HYUNDAI dealer to replace most vehicle light bulbs. It is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true for removing the headlight assembly to get to the bulb(s). Removing/installing the headlight assembly can result in damage to the vehicle. Headlight, Parking Lamp, Daytime Running Light, Turn Signal Lamp, Cornering Lamp and Side Marker Type A Information The headlight and tail lamp lenses could appear frosty if the vehicle is washed after driving or the vehicle is driven at night in wet weather. This condition is caused by temperature difference between the lamp inside and outside and, it does not indicate a problem with your vehicle. When moisture condenses in the lamp, it will be removed after driving with the headlight on. The removable level may differ depending on lamp size, lamp position and environmental condition. However, if moisture is not removed, have your vehicle inspected by an authorized HYUNDAI dealer. OQX089014N (1) (2) (3) (4) Headlight (High/Low) Parking lamp Turn signal lamp Side marker Headlight and parking lamp WARNING WARNING • Prior to replacing a lamp, depress the foot brake, move the shift lever into P (Park) apply the parking brake, place the ignition switch to the LOCK/OFF position, and take the key with you when leaving the vehicle to avoid sudden movement of the vehicle and to prevent possible electric shock. • Be aware the bulbs may be hot and may burn your fingers. OQX089043 • Handle halogen bulbs with care. Halogen bulbs contain pressurized gas that will produce flying pieces of glass that could cause injuries if broken. • Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it. 9-51 Maintenance • Always handle them carefully, and avoid scratches and abrasions. If the bulbs are lit, avoid contact with liquids. • Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and burst when lit. • A bulb should be operated only when installed in a headlight. • If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it. 5. Remove the bulb from the headlight assembly. 6. Install a new headlight bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove on the bulb. 7. Connect the headlight bulb socketconnector. 8. Install the headlight bulb cover by turning it clockwise. Headlight and parking lamp The headlight aiming should be adjusted after an accident or after the headlight assembly is reinstalled at an authorized HYUNDAI dealer. „ Headlight (high/low beam) Information OQX089015L „ Parking lamp OQX089017L OQX089016N 1. Open the hood. 2. Disconnect the negative battery cable. 3. Remove the headlight bulb cover by turning it counterclockwise. 4. Disconnect the headlight bulb socketconnector. 9-52 Turn signal lamp/side marker 1. Open the hood. 2. Disconnect the negative battery cable. 3. Remove the socket (1) from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. 09 5. Install a new bulb by inserting it into the socket and rotating it until it locks into place. 6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. 7. Push the socket into the assembly and turn the socket clockwise. Headlight (bulb type) WARNING Type B, C OQX089043 OQX089055N (1) (2) (3) (4) (5) Cornering lamp Headlight (Low/High) Daytime running lamp/parking lamp Turn signal lamp Side marker • Handle halogen bulbs with care. Halogen bulbs contain pressurized gas that will produce flying pieces of glass that could cause injuries if broken. • Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it. • Always handle them carefully, and avoid scratches and abrasions. If the bulbs are lit, avoid contact with liquids. • Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and burst when lit. • A bulb should be operated only when installed in a headlight. • If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it. 9-53 Maintenance „ Headlight (high/low beam) OQX089015L 1. Open the hood. 2. Disconnect the negative battery cable. 3. Remove the headlight bulb cover by turning it counterclockwise. 4. Disconnect the headlight bulb socketconnector. 5. Remove the bulb from the headlight assembly. 6. Install a new headlight bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove on the bulb. 7. Connect the headlight bulb socketconnector. 8. Install the headlight bulb cover by turning it clockwise. Information The headlight aiming should be adjusted after an accident or after the headlight assembly is reinstalled at an authorized HYUNDAI dealer. Headlight (LED type) Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. 9-54 OQX089016L Cornering lamp 1. Open the hood. 2. Disconnect the negative battery cable. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. 5. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. 7. Push the socket into the assembly and turn the socket clockwise. 09 Side Repeater Lamp Replacement (if equipped) „ Type A OQX089017L Turn signal lamp/side marker 1. Open the hood. 2. Disconnect the negative battery cable. 3. Remove the socket (1) from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. 5. Install a new bulb by inserting it into the socket and rotating it until it locks into place. 6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. 7. Push the socket into the assembly and turn the socket clockwise. Parking lamp and daytime running light Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. OHCR076032 „ Type B OQXI049074 [Type A] 1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out. 2. Disconnect the bulb electrical connector. 3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part. 4. Remove the bulb by pulling it straight out. 5. Insert a new bulb in the socket. 6. Reassemble the socket and the lens part. 7. Connect the bulb electrical connector. 8. Reinstall the lamp assembly to the body of the vehicle. [Type B] If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. 9-55 Maintenance Rear Combination Light Bulb Replacement „ Type A (Standard) OQXI079037 OQX089019N „ Type B (LED) Stop/tail Lamp And Turn Signal Lamp Replacement 1. Open the liftgate. 2. Open the lamp assembly retaining screw covers. 3. Loosen the lamp assembly retaining screws with a cross-tip screwdriver. OQX089056N (1) (2) (3) (4) (5) Tail lamp Stop/Tail lamp Turn signal lamp Back-up lamp Side marker 9-56 OQXI079038 4. Remove the rear combination lamp assembly from the body of the vehicle. 09 Tail / Stop Lamp (Type B) „ Type A (Standard) Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAi dealer. Stop/tail lamp Side Marker Turn signal lamp OQXI079039 „ Type B (LED) Your vehicle is equipped with LED lamps. LED lamps do not have replaceable bulbs. If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer. Back up Turn signal lamp OQXI079040 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. 7. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 8. Install the socket into the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 9. Reinstall the lamp assembly to the body of the vehicle. OQX089037 1. Disconnect the negative battery cable. 2. Loosen the retaining clips under the bumper and screws on the wheel house trim. 3. Pry trim under the bumper toward the vehicle. 4. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 5. Remove the bulb by pulling it straight out. 6. Insert a new bulb in the socket. 7. Reinstall the light assembly to the body of the vehicle. 9-57 Maintenance High Mounted Stop Lamp Replacement License Plate Light Bulb Replacement OQX059132 1. Open the liftgate. 2. Remove the lamp cover from the lamp assembly with a cross-tip screwdriver. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb by pulling it straight out. 5. Insert a new bulb in the socket. 6. Reinstall the light assembly to the body of the vehicle. 9-58 OQX089034L 1. Remove the cover by pressing it as direction of the arrows. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb. 4. Reinstall in the reverse order. 09 Interior Light Bulb Replacement „ Vanity mirror lamp Map Lamp, Room Lamp, Vanity Mirror Lamp, Luggage Compartment Lamp And Glove Box Lamp „ Map lamp (Type A) OOS077046 „ Luggage compartment lamp OQXI079045 „ Map lamp (Type B) OQX089022L OQX089044 „ Room lamp 1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp housing. 2. Remove the bulb by pulling it straight out. WARNING Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. OQXI079043 3. Install a new bulb in the socket. 4. Align the lens tabs with the interior lamp housing notches and snap the lens into place. NOTICE Use care not to dirty or damage lens, lens tab, and plastic housings. 9-59 Maintenance APPEARANCE CARE Exterior Care Exterior General Caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. High-pressure Washing • When using high-pressure washers, make sure to maintain sufficient distance from the vehicle. Insufficient clearance or excessive pressure can lead to component damage or water penetration. • Do not spray the camera, sensors or its surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not operate normally. • Do not bring the nozzle tip close to boots (rubber or plastic covers) or connectors as they may be damaged if they come into contact with high pressure water. • Do not use any high-pressure nozzles, which induce either one-direct water stream or water swirling. Protecting Your Vehicle’s Finish Washing To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly and frequently at least once a month with lukewarm or cold water. If you use your vehicle for off-road driving, you should wash it after each off-road trip. Pay special attention to the removal of any accumulation of salt, dirt, mud, and other foreign materials. Make sure the drain holes in the lower edges of the doors and rocker panels are kept clear and clean. 9-60 Insects, tar, tree sap, bird droppings, industrial pollution and similar deposits can damage your vehicle’s finish if not removed immediately. Even prompt washing with plain water may not completely remove all these deposits. A mild soap, safe for use on painted surfaces, should be used. After washing, rinse the vehicle thoroughly with lukewarm or cold water. Do not allow soap to dry on the finish. WARNING After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water before getting on the road. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow forward speed. NOTICE • Do not use strong soap, chemical detergents or hot water, and do not wash the vehicle in direct sunlight or when the body of the vehicle is warm. • Be careful when washing the side windows of your vehicle. Especially, with high-pressure water, water may leak through the windows and wet the interior. • To prevent damage to the plastic parts, do not clean with chemical solvents or strong detergents. 09 OQX089025N NOTICE • Water washing in the engine compartment including high pressure water washing may cause the failure of electrical circuits located in the engine compartment. • Never allow water or other liquids to come in contact with electrical/ electronic components inside the vehicle as this may damage them. NOTICE Matte paint finish vehicle (if equipped) Automatic car wash which uses rotating brushes should not be used as this can damage the surface of your vehicle. A steam cleaner which washes the vehicle surface at high temperature may result the oil to adhere and leave stains that is difficult to remove. Use a soft cloth (for example, microfiber towel or sponge) when washing your vehicle and dry with a microfiber towel. When you hand wash your vehicle, you should not use a cleaner that finishes with wax. If the vehicle surface is too dirty (sand, dirt, dust, contaminant, etc.), clean the surface with water before washing the car. Waxing A good coat of wax provides a barrier between your paint and environmental contamination. Keeping a good coat of wax on your vehicle will help protect it. Wax the vehicle when water will no longer bead on the paint. Always wash and dry the vehicle before waxing. Use a good quality liquid or paste wax, and follow the manufacturer’s instructions. Wax all metal trim to protect it and to maintain its luster. Removing oil, tar, and similar materials with a spot remover will usually strip the wax from the finish. Be sure to re-wax these areas even if the rest of the vehicle does not yet need waxing. NOTICE • Wiping dust or dirt off the body with a dry cloth will scratch the finish. • Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deterioration. NOTICE Matte paint finish vehicle (if equipped) Do not use any polish protector such as a detergent, an abrasive and a polish. In case wax is applied, remove the wax immediately using a silicon remover and if any tar or tar contaminant is on the surface use a tar remover to clean. However, be careful not to apply too much pressure on the painted area. 9-61 Maintenance Repairing Your Vehicle’s Finish Underbody Maintenance Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense. Corrosive materials used for ice and snow removal and dust control may collect on the underbody. If these materials are not removed, accelerated rusting can occur on underbody parts such as the fuel lines, frame, floor pan and exhaust system, even though they have been treated with rust protection. Thoroughly flush the vehicle underbody and wheel openings with lukewarm or cold water once a month, after off-road driving and at the end of each winter. Pay special attention to these areas because it is difficult to see all the mud and dirt. It will do more harm than good to wet down the road grime without removing it. The lower edges of doors, rocker panels, and frame members have drain holes that should not be allowed to clog with dirt; trapped water in these areas can cause rusting. NOTICE If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anticorrosion materials to the parts repaired or replaced. NOTICE Matte paint finish vehicle (if equipped) In case of matte paint finish vehicles, it is impossible to modify only the damaged area and repair of the whole part is necessary. If the vehicle is damaged and painting is required, have your vehicle maintained and repaired by an authorized HYUNDAI dealer. Take extreme care, as it is difficult to restore the quality after the repair. Bright-metal Maintenance • To remove road tar and insects, use a tar remover, not a scraper or other sharp object. • To protect the surfaces of brightmetal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster. • During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound. 9-62 WARNING After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow forward speed. Aluminum Wheel Maintenance The aluminum wheels are coated with a clear protective finish. 09 NOTICE • Do not use abrasive cleaner, polishing compound, solvent, or wire brushes on aluminum wheels. • Clean the wheel when it has cooled. • Use only a mild soap or neutral detergent, and rinse thoroughly with water. Also, clean the wheels after driving on salted roads. • Do not wash the wheels with highspeed car wash brushes. • Do not use any cleaners containing acid or alkaline detergents. Corrosion Protection Protecting your vehicle from corrosion By using the most advanced design and construction practices to combat corrosion, HYUNDAI produces vehicles of the highest quality. However, this is only part of the job. To achieve the longterm corrosion resistance your vehicle can deliver, the owner’s cooperation and assistance is also required. Common causes of corrosion The most common causes of corrosion on your vehicle are: • Road salt, dirt and moisture that is allowed to accumulate underneath the vehicle. • Removal of paint or protective coatings by stones, gravel, abrasion or minor scrapes and dents which leave unprotected metal exposed to corrosion. High-corrosion areas If you live in an area where your vehicle is regularly exposed to corrosive materials, corrosion protection is particularly important. Some of the common causes of accelerated corrosion are road salts, dust control chemicals, ocean air and industrial pollution. Moisture breeds corrosion Moisture creates the conditions in which corrosion is most likely to occur. For example, corrosion is accelerated by high humidity, particularly when temperatures are just above freezing. In such conditions, the corrosive material is kept in contact with the car surfaces by moisture that is slow to evaporate. Mud is particularly corrosive because it is slow to dry and holds moisture in contact with the vehicle. Although the mud appears to be dry, it can still retain the moisture and promote corrosion. High temperatures can also accelerate corrosion of parts that are not properly ventilated so the moisture can be dispersed. For all these reasons, it is particularly important to keep your vehicle clean and free of mud or accumulations of other materials. This applies not only to the visible surfaces but particularly to the underside of the vehicle. To help prevent corrosion Keep your vehicle clean The best way to prevent corrosion is to keep your vehicle clean and free of corrosive materials. Attention to the underside of the vehicle is particularly important. • If you live in a high-corrosion area — where road salts are used, near the ocean, areas with industrial pollution, acid rain, etc.—, you should take extra care to prevent corrosion. In winter, hose off the underside of your vehicle at least once a month and be sure to clean the underside thoroughly when winter is over. 9-63 Maintenance • When cleaning underneath the vehicle, pay particular attention to the components under the fenders and other areas that are hidden from view. Do a thorough job; just dampening the accumulated mud rather than washing it away will accelerate corrosion rather than prevent it. Water under high pressure and steam are particularly effective in removing accumulated mud and corrosive materials. • When cleaning lower door panels, rocker panels and frame members, be sure that drain holes are kept open so that moisture can escape and not be trapped inside to accelerate corrosion. Keep your garage dry Don’t park your vehicle in a damp, poorly ventilated garage. This creates a favorable environment for corrosion. This is particularly true if you wash your vehicle in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can contribute to corrosion unless it is well ventilated so moisture is dispersed. Keep paint and trim in good condition Scratches or chips in the finish should be covered with “touch-up” paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the attention of a qualified body and paint shop is recommended. Bird droppings are highly corrosive and may damage painted surfaces in just a few hours. Always remove bird droppings as soon as possible. 9-64 Interior Care Interior General Precautions Prevent caustic solutions such as perfume and cosmetic oil, from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately. See the instructions for the proper way to clean vehicle interior surfaces. NOTICE • Never allow water or other liquids to come in contact with electrical/ electronic components inside the vehicle as this may damage them. • When cleaning leather products (steering wheel, seats etc.), use neutral detergents or low alcohol content solutions. If you use high alcohol content solutions or acid/ alkaline detergents, the color of the leather may fade or the surface may get stripped off. Cleaning the Upholstery and Interior Trim Vehicle interior surfaces (if equipped) Remove dust and loose dirt from interior surfaces with a whisk broom or a vacuum cleaner. If necessary, clean interior surfaces with a mixture of warm water and mild nondetergent cleaner (test all cleaners on a concealed area before use). Fabric (if equipped) Remove dust and loose dirt from fabric with a whisk broom or vacuum cleaner. Clean with a mild soap solution recommended for upholstery or carpets. Remove fresh spots immediately with a fabric spot cleaner. If fresh spots do not receive immediate attention, the fabric can be stained and its color can be affected. Also, its fire-resistant properties can be reduced if the material is not properly maintained. 09 NOTICE Using anything but recommended cleaners and procedures may affect the fabric’s appearance and fire-resistant properties. Leather (if equipped) • Features of seat leather - Leather is made from the outer skin of an animal, which goes through a special process to be available for use. Since it is a natural product, each part differs in thickness or density. Wrinkles may appear as a natural result of stretching and shrinking depending on the temperature and humidity. - The seat is made of stretchable fabric to improve comfort. - The parts contacting the body are curved and the side supporting area is high which provides driving comfort and stability. - Wrinkles may appear naturally from usage. It is not a fault of the products. CAUTION • Wrinkles or abrasions which appear naturally from usage are not covered by warranty. • Belts with metallic accessories, zippers or keys inside the back pocket may damage the seat fabric. • Make sure not to wet the seat. It may change the nature of natural leather. • Jeans or clothes which could bleach may contaminate the surface of the seat covering fabric. • Caring for the leather seats - Vacuum the seat periodically to remove dust and sand on the seat. It will prevent abrasion or damage of the leather and maintain its quality. - Wipe the natural leather seat cover often with dry or soft cloth. - Use of proper leather protector may prevent abrasion of the cover and helps maintain the color. Be sure to read the instructions and consult a specialist when using leather coating or protective agent. - Light colored (beige, cream beige) leather is easily contaminated and the stain is noticeable. Clean the seats frequently. - Avoid wiping with wet cloth. It may cause the surface to crack. • Cleaning the leather seats - Remove all contaminations instantly. Refer to instructions below for removal of each contaminant. - Cosmetic products (sunscreen, foundation, etc.) Apply cleansing cream on a cloth and wipe the contaminated spot. Wipe off the cream with a wet cloth and remove water with a dry cloth. - Beverages (coffee, soft drink, etc.) Apply a small amount of neutral detergent and wipe until contaminations do not smear. - Oil Remove oil instantly with absorbable cloth and wipe with stain remover used only for natural leather. - Chewing gum Harden the gum with ice and remove gradually. 9-65 Maintenance Cleaning the Seat Belt Webbing Clean the belt webbing with any mild soap solution recommended for cleaning upholstery or carpet. Follow the instructions provided with the soap. Do not bleach or re-dye the webbing because this may weaken the seat belt. Cleaning the Interior Window Glass If the interior glass surfaces of the vehicle become hazy (that is, covered with an oily, greasy or waxy film), they should be cleaned with glass cleaner. Follow the directions on the glass cleaner container. NOTICE Do not scrape or scratch the inside of the rear window. This may result in damage to the rear window defroster grid. EMISSION CONTROL SYSTEM The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Owner’s Handbook & Warranty Information booklet in your vehicle. Your vehicle is equipped with an emission control system to meet all applicable emission regulations. There are three emission control systems, as follows. (1) Crankcase emission control system (2) Evaporative emission control system (3) Exhaust emission control system In order to ensure the proper function of the emission control systems, it is recommended that you have your vehicle inspected and maintained by an authorized HYUNDAI dealer in accordance with the maintenance schedule in this manual. NOTICE For the Inspection and Maintenance Test (with Electronic Stability Control (ESC) system) • To prevent the vehicle from misfiring during dynamometer testing, turn the Electronic Stability Control (ESC) system off by pressing the ESC switch (ESC OFF light illuminated). • After dynamometer testing is completed, turn the ESC system back on by pressing the ESC switch again. 9-66 09 1. Crankcase Emission Control System 3. Exhaust Emission Control System The positive crankcase ventilation system is employed to prevent air pollution caused by blow-by gases being emitted from the crankcase. This system supplies fresh filtered air to the crankcase through the air intake hose. Inside the crankcase, the fresh air mixes with blow-by gases, which then pass through the PCV valve into the induction system. The Exhaust Emission Control System is a highly effective system which controls exhaust emissions while maintaining good vehicle performance. When the engine starts or fails to start, excessive attempts to restart the engine may cause damage to the emission system. 2. Evaporative Emission Control System Including Onboard Refueling Vapor Recovery (ORVR) The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere. The ORVR system is designed to allow the vapors from the fuel tank to be loaded into a canister while refueling at the gas station, preventing the escape of fuel vapors into the atmosphere. Canister Fuel vapors generated inside the fuel tank are absorbed and stored in the onboard canister. When the engine is running, the fuel vapors absorbed in the canister are drawn into the surge tank through the purge control solenoid valve. Purge Control Solenoid Valve (PCSV) The purge control solenoid valve is controlled by the Engine Control Module (ECM); when the engine coolant temperature is low during idling, the PCSV closes so that evaporated fuel is not taken into the engine. After the engine warms-up during ordinary driving, the PCSV opens to introduce evaporated fuel to the engine. Engine Exhaust (carbon Monoxide) Precautions • Carbon monoxide can be present with other exhaust fumes. If you smell exhaust fumes of any kind in your vehicle, drive with all the windows fully open. Have your vehicle checked and repaired immediately. WARNING Engine exhaust gases contain carbon monoxide (CO). Though colorless and odorless, it is dangerous and could be lethal if inhaled. Follow the instructions on this page to avoid CO poisoning. WARNING CALIFORNIA PROPOSITION 65 WARNING Engine exhaust and a wide variety of automobile components and parts, including components found in the interior furnishings in a vehicle, contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 9-67 Maintenance • Do not operate the engine in confined or closed areas (such as garages) any more than what is necessary to move the vehicle in or out of the area. • When the vehicle is stopped in an open area for more than a short time with the engine running, adjust the ventilation system (as needed) to draw outside air into the vehicle. • Never sit in a parked or stopped vehicle for any extended time with the engine running. • When the engine stalls or fails to start, excessive attempts to restart the engine may cause damage to the emission control system. Operating Precautions for Catalytic Converters (if equipped) WARNING The exhaust system and catalytic system are very hot while the engine is running or immediately after the engine is turned off. To avoid SERIOUS INJURY or DEATH: • Do not park, idle, or drive the vehicle over or near flammable objects, such as grass, vegetation, paper, leaves, etc. A hot exhaust system can ignite flammable items under your vehicle. • Keep away from the exhaust system and catalytic converter or you may get burned. Also, Do not remove the heat sink around the exhaust system, do not seal the bottom of the vehicle, and do not coat the vehicle for corrosion control. It may present a fire risk under certain conditions. 9-68 Your vehicle is equipped with a catalytic converter emission control device. To prevent damage to the catalytic converter and to your vehicle, take the following precautions: • Use only UNLEADED FUEL for gasoline engines. • Do not operate the vehicle when there are signs of engine malfunction, such as misfire or a noticeable loss of performance. • Do not misuse or abuse the engine. Examples of misuse are coasting with the engine off and descending steep grades in gear with the engine off. • Do not operate the engine at high idle speed for extended periods (5 minutes or more). • Do not modify or tamper with any part of the engine or emission control system. All inspections and adjustments must be made by an authorized HYUNDAI dealer. • Avoid driving with extremely low fuel level. If you run out of gasoline, it could cause the engine to misfire and result in excessive loading of the catalytic converter. 09 CALIFORNIA PERCHLORATE NOTICE Perchlorate Material-special handling may apply, See: https://dtsc.ca.gov/perchlorate. Notice to California Vehicle Dismantlers: Perchlorate containing materials, such as air bag inflators, seatbelt pretensioners and keyless remote entry batteries, must be disposed of according to Title 22 California Code of Regulations Section 67384.10 (a). 9-69 Maintenance CONSUMER INFORMATION This consumer information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation.Your HYUNDAI dealer will help answer any questions you may have as you read this information. HYUNDAI motor vehicles are designed and manufactured to meet or exceed all applicable safety standards. For your safety, however, we strongly urge you to read and follow all directions in this Owner’s Manual, particularly the information under the headings “NOTICE”, “CAUTION” and “WARNING”. If, after reading this manual, you have any questions regarding the operation of your vehicle, please contact the Hyundai Customer Care Center. Hyundai Customer Care P.O. Box 20850 Fountain Valley, CA 92728 800-633-5151 [email protected] Hyundai’s Customer Care Center representatives are available Monday through Friday, between the hours of 6:00 AM and 5:00 PM PST and Saturday between 6:30 AM and 3:00 PM PST (English). For Customer Care assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST. 9-70 09 REPORTING SAFETY DEFECTS If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying HYUNDAI MOTOR AMERICA. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888- 327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; download the SaferCar mobile application; or write to: Administrator, NHTSA 1200 New Jersey Ave, SE, West Building Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or HYUNDAI MOTOR AMERICA. 9-71 Index I Index A Accessing Your Vehicle..........................................................................................5-4 Immobilizer System......................................................................................... 5-11 Remote Key........................................................................................................ 5-4 Smart Key.......................................................................................................... 5-7 Air Bag - Advanced Supplemental Restraint System...........................................3-31 Additional Safety Precautions.......................................................................... 3-51 Air Bag Warning Labels................................................................................... 3-51 How Does the Air Bag System Operate?......................................................... 3-36 Occupant Classification System (OCS)........................................................... 3-40 SRS Care.......................................................................................................... 3-50 What to Expect After an Air Bag Inflates........................................................ 3-39 Where Are the Air Bags?................................................................................. 3-33 Why Didn’t My Air Bag Go Off in a Collision?.............................................. 3-46 Air Cleaner...........................................................................................................9-22 Filter Replacement........................................................................................... 9-22 Air Conditioning System......................................................................................2-10 Appearance Care...................................................................................................9-60 Exterior Care.................................................................................................... 9-60 Interior Care..................................................................................................... 9-64 Automatic Climate Control System......................................................................5-58 Automatic Temperature Control Mode............................................................ 5-59 Manual Temperature Control Mode................................................................. 5-60 System Maintenance........................................................................................ 5-65 System Operation............................................................................................. 5-64 B Battery..................................................................................................................9-26 Battery Recharging........................................................................................... 9-27 For Best Battery Service.................................................................................. 9-27 Reset Features.................................................................................................. 9-27 Before Driving........................................................................................................6-4 Before Entering the Vehicle............................................................................... 6-4 Before Starting................................................................................................... 6-4 Blind-Spot Collision Warning (BCW)..................................................................7-35 Blind-Spot Collision Warning malfunction and limitations............................. 7-39 Blind-Spot Collision Warning operation.......................................................... 7-38 Blind-Spot Collision Warning settings............................................................. 7-37 I-2 I Brake/Clutch Fluid...............................................................................................9-20 Checking the Brake/Clutch Fluid Level........................................................... 9-20 Brake System........................................................................................................6-17 Anti-lock Brake System (ABS)........................................................................ 6-19 Disc Brakes Wear Indicator.............................................................................. 6-17 Electronic Stability Control (ESC).................................................................. 6-21 Good Braking Practices................................................................................... 6-24 Hill-Start Assist Control (HAC)....................................................................... 6-24 Parking Brake................................................................................................... 6-18 Power Brakes................................................................................................... 6-17 Rear Drum Brakes............................................................................................ 6-18 Vehicle Stability Management (VSM)............................................................. 6-23 Bulb Wattage...........................................................................................................2-8 C California Perchlorate Notice...............................................................................9-69 Child Restraint System (CRS)..............................................................................3-23 Children Always in the Rear............................................................................ 3-23 Installing a Child Restraint System (CRS)...................................................... 3-25 Selecting a Child Restraint System (CRS)....................................................... 3-24 Climate Control Air Filter.....................................................................................9-23 Filter Inspection............................................................................................... 9-23 Cluster Display.....................................................................................................4-21 Cluster Display Control................................................................................... 4-21 Cluster Display Modes..................................................................................... 4-22 Consumer Information..........................................................................................9-70 Cruise Control (CC)..............................................................................................7-53 Cruise Control operation ................................................................................. 7-53 D Dimensions.............................................................................................................2-7 Door Locks...........................................................................................................5-12 Automatic Door Lock and Unlock Features.................................................... 5-15 Child-Protector Rear Door Locks.................................................................... 5-15 Operating Door Locks from Inside the Vehicle............................................... 5-13 Operating Door Locks from Outside the Vehicle............................................. 5-12 I-3 Index Drive Mode Integrated Control System................................................................6-25 Cluster Display Message.................................................................................. 6-26 Driver Attention Warning (DAW)........................................................................7-48 Driver Attention Warning malfunction and limitations.................................... 7-50 Driver Attention Warning operation................................................................. 7-49 Driver Attention Warning settings ................................................................... 7-48 E Emission Control System.....................................................................................9-66 Crankcase Emission Control System............................................................... 9-67 Evaporative Emission Control System Including Onboard Refueling Vapor Recovery (ORVR)............................................................................................ 9-67 Exhaust Emission Control System................................................................... 9-67 Engine.....................................................................................................................2-7 Engine Compartment..............................................................................................9-3 Engine Compartment..............................................................................................2-6 Engine Coolant.....................................................................................................9-17 Changing Engine Coolant................................................................................ 9-19 Checking the Engine Coolant Level................................................................ 9-17 Engine Number.....................................................................................................2-14 Engine Oil.............................................................................................................9-15 Checking the Engine Oil and Filter.................................................................. 9-16 Checking the Engine Oil Level........................................................................ 9-15 Explanation of Scheduled Maintenance Items.....................................................9-12 Exterior Features...................................................................................................5-79 Roof Side Rails................................................................................................ 5-79 Exterior Overview..................................................................................................2-2 F Forward Collision–Avoidance Assist (FCA) (Front view camera only) ...............7-2 Forward Collision-Avoidance Assist malfunction and limitations ................... 7-7 Forward Collision-Avoidance Assist operation ................................................ 7-5 Forward Collision-Avoidance Assist settings ................................................... 7-3 Forward Collision–Avoidance Assist (FCA) (Sensor fusion) .............................7-14 Forward Collision-Avoidance Assist Malfunction and Limitations ................ 7-21 Forward Collision-Avoidance Assist Operation............................................... 7-18 Forward Collision-Avoidance Assist Settings.................................................. 7-16 I-4 I Fuel Filler Door....................................................................................................5-36 Closing the Fuel Filler Door............................................................................ 5-36 Opening the Fuel Filler Door........................................................................... 5-36 Fuel Requirements..................................................................................................1-5 Fuses.....................................................................................................................9-40 Engine Compartment Panel Fuse Replacement............................................... 9-42 Fuse/Relay Panel Description.......................................................................... 9-44 Instrument Panel Fuse Replacement................................................................ 9-41 G Guide to Hyundai Genuine Parts............................................................................1-3 H Hazard Warning Flasher.........................................................................................8-2 Hood.....................................................................................................................5-32 Closing the Hood............................................................................................. 5-33 Opening the Hood............................................................................................ 5-32 How to Use This Manual........................................................................................1-4 I If the Engine Overheats..........................................................................................8-6 If the Engine Will Not Start....................................................................................8-3 If the Engine Doesn’t Turn Over or Turns Over Slowly.................................... 8-3 If the Engine Turns Over Normally but Doesn’t Start....................................... 8-3 If you Have a Flat Tire (With Spare Tire).............................................................8-15 Changing Tires................................................................................................. 8-16 Jack and Tools.................................................................................................. 8-15 Ignition Switch.......................................................................................................6-5 Engine Start/Stop Button................................................................................... 6-8 Key Ignition Switch........................................................................................... 6-5 Important Safety Precautions..................................................................................3-2 Air Bag Hazards................................................................................................. 3-2 Always Wear Your Seat Belt.............................................................................. 3-2 Control Your Speed............................................................................................ 3-2 Driver Distraction.............................................................................................. 3-2 Keep Your Vehicle in Safe Condition................................................................ 3-2 Restrain All Children......................................................................................... 3-2 I-5 Index In Case of an Emergency While Driving................................................................8-2 If the Engine Stalls at a Crossroad or Crossing................................................. 8-2 If the Engine Stalls While Driving..................................................................... 8-2 If you Have a Flat Tire While Driving............................................................... 8-3 Infotainment System.............................................................................................5-80 Antenna............................................................................................................ 5-80 Audio (Display Audio) / Video / Navigation System ...................................... 5-82 Bluetooth® Wireless Technology Hands-Free................................................. 5-82 Steering Wheel Audio Control......................................................................... 5-81 USB and IPod® Port........................................................................................ 5-80 Instrument Cluster..................................................................................................4-4 Cluster Display Messages................................................................................ 4-17 Gauges and Meters............................................................................................. 4-5 Instrument Cluster Control................................................................................. 4-5 Transmission Shift Indicator.............................................................................. 4-8 Warning and Indicator Lights............................................................................. 4-9 Instrument Panel Overview....................................................................................2-5 Intelligent Variable Transmission (IVT)...............................................................6-12 Good Driving Practices.................................................................................... 6-16 Intelligent Variable Transmission (IVT) Operation......................................... 6-12 Interior Features....................................................................................................5-71 Cargo Area Cover............................................................................................. 5-78 Clock................................................................................................................ 5-76 Clothes Hanger................................................................................................. 5-76 Cup Holder....................................................................................................... 5-71 Floor Mat Anchor(s)......................................................................................... 5-77 Luggage Net Holder......................................................................................... 5-77 Power Outlet.................................................................................................... 5-72 Sunvisor........................................................................................................... 5-72 USB Charger.................................................................................................... 5-73 Wireless Cellular Phone Charging System ..................................................... 5-74 Interior Overview...................................................................................................2-4 J Jump Starting..........................................................................................................8-4 I-6 I L Lane Keeping Assist (LKA).................................................................................7-29 Lane Keeping Assist malfunction and limitations........................................... 7-33 Lane Keeping Assist operation........................................................................ 7-30 Lane Keeping Assist settings .......................................................................... 7-29 Liftgate..................................................................................................................5-34 Closing the Liftgate.......................................................................................... 5-34 Emergency Liftgate Safety Release................................................................. 5-35 Opening the Liftgate........................................................................................ 5-34 Light Bulbs...........................................................................................................9-51 Headlight, Parking Lamp, Daytime Running Light, Turn Signal Lamp, Cornering Lamp and Side Marker..................................................................................... 9-51 High Mounted Stop Lamp Replacement.......................................................... 9-58 Interior Light Bulb Replacement..................................................................... 9-59 License Plate Light Bulb Replacement............................................................ 9-58 Rear Combination Light Bulb Replacement.................................................... 9-56 Side Repeater Lamp Replacement................................................................... 9-55 Lighting................................................................................................................5-38 Exterior Lights................................................................................................. 5-38 Interior Lights.................................................................................................. 5-44 M Maintenance Services.............................................................................................9-4 Owner Maintenance Precautions....................................................................... 9-4 Owner’s Responsibility...................................................................................... 9-4 Manual Climate Control System..........................................................................5-50 Heating and Air Conditioning.......................................................................... 5-51 System Maintenance........................................................................................ 5-56 System Operation............................................................................................. 5-54 Manual Speed Limit Assist (MSLA)....................................................................7-45 Manual Speed Limit Assist operation ............................................................. 7-45 Mirrors..................................................................................................................5-20 Inside Rearview Mirror.................................................................................... 5-20 Side View Mirrors............................................................................................ 5-21 I-7 Index O Owner Maintenance................................................................................................9-5 Owner Maintenance Schedule........................................................................... 9-5 P Parking Brake.......................................................................................................9-21 Checking the Parking Brake............................................................................ 9-21 R Rear Cross-Traffic Collision Warning (RCCW)...................................................7-59 Rear Cross-Traffic Collision Warning Malfunction and Limitation................ 7-62 Rear Cross-Traffic Collision Warning Operation............................................. 7-61 Rear Cross-Traffic Collision Warning Settings................................................ 7-60 The Radio Frequency Components (Rear Corner Radar) Complies: ............. 7-67 Rear Occupant Alert (ROA) ................................................................................5-17 Rear Occupant Alert Operation........................................................................ 5-17 Rear View Monitor (RVM)...................................................................................7-57 Rear View Monitor malfunction and limitations............................................. 7-58 Rear View Monitor operation .......................................................................... 7-58 Rear View Monitor settings............................................................................. 7-57 Recommended Lubricants and Capacities............................................................ 2-11 Recommended SAE Viscosity Number........................................................... 2-12 Reporting Safety Defects......................................................................................9-71 S Safety Messages.....................................................................................................1-4 Scheduled Maintenance Services...........................................................................9-7 Maintenance Under Severe Usage Conditions................................................. 9-11 Normal Maintenance Schedule.......................................................................... 9-8 Severe Driving Conditions............................................................................... 9-11 Seat Belts..............................................................................................................3-14 Additional Seat Belt Safety Precautions.......................................................... 3-20 Care of Seat Belts............................................................................................. 3-22 Seat Belt Restraint System............................................................................... 3-16 Seat Belt Safety Precautions............................................................................ 3-14 Seat Belt Warning Light................................................................................... 3-15 I-8 I Seats........................................................................................................................3-3 Front Seats.......................................................................................................... 3-5 Head Restraints.................................................................................................. 3-9 Rear Seats........................................................................................................... 3-7 Safety Precautions.............................................................................................. 3-4 Seat Warmers.................................................................................................... 3-12 Special Driving Conditions..................................................................................6-28 Driving at Night............................................................................................... 6-29 Driving in Flooded Areas................................................................................. 6-29 Driving in the Rain........................................................................................... 6-29 Hazardous Driving Conditions......................................................................... 6-28 Highway Driving.............................................................................................. 6-30 Reducing the Risk of a Rollover...................................................................... 6-30 Rocking the Vehicle......................................................................................... 6-28 Smooth Cornering............................................................................................ 6-29 Steering Wheel......................................................................................................5-18 Horn................................................................................................................. 5-20 Motor Driven Power Steering (MDPS)........................................................... 5-18 Tilt Steering / Telescope Steering.................................................................... 5-19 Storage Compartment...........................................................................................5-70 Center Console Storage.................................................................................... 5-70 Glove Box........................................................................................................ 5-71 Sliding Armrest................................................................................................ 5-70 Sunroof.................................................................................................................5-27 Automatic Reversal.......................................................................................... 5-29 Resetting the Sunroof....................................................................................... 5-30 Sunroof Opening and Closing.......................................................................... 5-29 Sunroof Open Warning..................................................................................... 5-31 Sunshade.......................................................................................................... 5-28 Tilt Open/close................................................................................................. 5-28 T Theft-Alarm System.............................................................................................5-16 Tire Pressure Monitoring System (TPMS) (Type A)..............................................8-7 Changing a Tire with TPMS.............................................................................. 8-8 TPMS Malfunction Indicator............................................................................. 8-8 I-9 Index Tire Pressure Monitoring System (TPMS) (Type B)............................................8-10 Changing a Tire with TPMS............................................................................ 8-13 Check Tire Pressure......................................................................................... 8-10 Low Tire Pressure Cluster Display with Position Indicator............................. 8-12 Low Tire Pressure Telltale............................................................................... 8-12 Tire Pressure Monitoring System..................................................................... 8-11 TPMS Malfunction Indicator........................................................................... 8-13 Tires and Wheels....................................................................................................2-9 Tires and Wheels..................................................................................................9-28 All Season Tires............................................................................................... 9-38 Check Tire Inflation Pressure........................................................................... 9-29 Low Aspect Ratio Tires.................................................................................... 9-39 Radial-Ply Tires................................................................................................ 9-39 Recommended Cold Tire Inflation Pressures................................................... 9-28 Snow Tires........................................................................................................ 9-38 Summer Tires................................................................................................... 9-38 Tire Care........................................................................................................... 9-28 Tire Maintenance.............................................................................................. 9-32 Tire Replacement............................................................................................. 9-31 Tire Rotation.................................................................................................... 9-30 Tire Sidewall Labeling..................................................................................... 9-32 Tire Terminology and Definitions.................................................................... 9-36 Tire Traction..................................................................................................... 9-32 Wheel Alignment and Tire Balance................................................................. 9-30 Wheel Replacement......................................................................................... 9-32 Tire Specification and Pressure Label..................................................................2-14 Towing..................................................................................................................8-21 Emergency Towing.......................................................................................... 8-23 Removable Towing Hook................................................................................ 8-22 Tie-down Hook................................................................................................ 8-24 Towing Service................................................................................................. 8-21 Trailer Towing......................................................................................................6-38 Trip Computer......................................................................................................4-31 I-10 I V Vehicle Break-In Process........................................................................................1-7 Vehicle Certification Label...................................................................................2-13 Vehicle Data Collection and Event Data Recorders...............................................1-8 Vehicle Identification Number (VIN)...................................................................2-13 Vehicle Load Limit...............................................................................................6-34 Tire Loading Information Label....................................................................... 6-34 Vehicle Modifications.............................................................................................1-7 Volume and Weight...............................................................................................2-10 W Washer Fluid.........................................................................................................9-21 Checking the Washer Fluid Level.................................................................... 9-21 Windows...............................................................................................................5-23 Power Windows............................................................................................... 5-24 Windshield Defrosting and Defogging.................................................................5-67 Rear Window Defroster................................................................................... 5-69 Winter Driving......................................................................................................6-31 Snow or Icy Conditions.................................................................................... 6-31 Winter Precautions........................................................................................... 6-32 Wiper Blades.........................................................................................................9-24 Blade Inspection............................................................................................... 9-24 Blade Replacement.......................................................................................... 9-24 Wipers and Washers..............................................................................................5-47 Rear Window Wiper and Washer..................................................................... 5-49 Windshield Washers......................................................................................... 5-48 Windshield Wipers........................................................................................... 5-47 I-11