13345
KIA SEDONA / HYUNDAI ENTOURAGE
(FITS LONG WHEEL
BASE ONLY! 119")
6/4/08
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 3,500 LBS. TRAILER WEIGHT & 350 LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: 4,000 LBS. TRAILER WEIGHT & 400 LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
Parts List
ITEM QTY PART NUMBER
DESCRIPTION
1
6 M12-1.25 x 30mm
HEX BOLT
2
6
1/2"
PASSENGER SIDE FRAME RAIL
CONICAL TOOTHED WASHER
TOOLS REQUIRED
RATCHET
19mm SOCKET
TORQUE WRENCH
DRIVER SIDE FRAME RAIL
EXISTING FRAME
WELDNUTS
(BOTH SIDES)
2
1
HITCH WEIGHT: 35 LBS.
INSTALL TIME: 15 MINUTES
INSTALL NOTES:
- NO DRILLING REQUIRED
- LOWER EXHAUST FOR EASE
OF INSTALL
INSTALLATION STEPS
1) Remove the exhaust from it's hangers to provide access to frame fastener locations.
2) Raise hitch on the passenger side over exhaust pipe and rotate hitch into position.
3) Secure hitch by loosely installing all (6) 12mm hex bolts and (6) conical washers as shown.
4) Push hitch forward against installed bolts.
5) Torque all 12mm fasteners to 65 ft-lb.
6) Re-attach previously removed exhaust hangers.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.