Honda - CR-V - Owners Manual - 2018 - 2018

INSTALL GUIDE 2018 HONDA ACCORD PTS AT DOCUMENT NUMBER REVISION DATE 20181116 FIRMWARE ADS-RSA-HA8-[HC3452AF] HARDWARE HC3452AF ACCESSORIES ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED. VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE. TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, noncompliant Certified Technicians or end users. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 www.idatalink.com HARDWIRE / COMPONENT LOCATOR - 1 OF 1 PAGE 2 OF 6 20181116 A T004_W Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Accord PTS AT www.idatalink.com PAGE 3 OF 6 20181116 HARDWIRE / WIRING DIAGRAM - 1 OF 1 M1 ! ! M2 M3 CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY BCM, ABOVE DASH FUSEBOX (A) M5 M4 1 2 M1 01 ORANGE 02 RED 03 PURPLE 04 PINK/WHITE 05 PINK 06 WHITE 07 RED 08 BLACK 3 12V (+) RED - 01 1: WHITE PARKING LIGHTS (-) GRAY - 12 M2 01 GREEN•BLACK DOT 02 BLUE•BLACK DOT 03 RED/WHITE•BLACK DOT 04 GREEN/WHITE•BLACK DOT 05 GREEN/BLACK•BLACK DOT 06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT 07 EMPTY 08 WHITE/PURPLE•BLACK DOT 09 PURPLE/BLACK•BLACK DOT 10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT 11 BROWN/BLACK•BLACK DOT 12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT LIGHTS OFF (-) YELLOW - 41 1 CANH (DATA) PINK - 54 2 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 CANL (DATA) BLUE -55 GROUND (-) BLACK - 56 2: BLUE S-NET (DATA) TAN - 54 1 2 M3 01 BROWN•SILVER DOT 02 BLACK/WHITE•SILVER DOT 03 PURPLE•SILVER DOT 04 GREEN•SILVER DOT 05 PURPLE/WHITE•SILVER DOT 06 WHITE/BLUE•SILVER DOT 07 GRAY•SILVER DOT - HOOD (-) INPUT 08 BLUE•SILVER DOT 09 GRAY/BLACK•SILVER DOT 10 EMPTY 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 3: BROWN ACCESSORY (+) GRAY - 43 STARTER (+) PURPLE - 51 1 IGNITION 1 (+) WHITE - 54 2 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 PTS (+) WHITE - 63 M4 01 EMPTY 02 EMPTY 03 BROWN/RED - CANH 1 04 BROWN/YELLOW - CANL 1 05 BLUE/RED 06 BLUE/YELLOW 07 EMPTY 08 ORANGE 09 YELLOW - PTS (+) OUTPUT 10 EMPTY 11 GRAY/RED 12 GRAY/YELLOW 13 GREEN/RED 14 ORANGE/WHITE 15 BROWN - ACCESSORY (+) IN/OUT 16 ORANGE/BLACK - S-NET (DATA) 17 PINK - IGNITION (+) IN/OUT 18 PURPLE - STARTER (+) OUTPUT 19 RED - 12V (+) INPUT 20 BLACK - GROUND (-) HORN (-) M5 01 GRAY/BLACK•BLUE DOT 02 WHITE/BLACK•BLUE DOT 03 GRAY/RED•BLUE DOT 04 WHITE/RED•BLUE DOT 05 GRAY•BLUE DOT 06 WHITE•BLUE DOT T004_W Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF 1 THE VEHICLE IS NOT EQUIPPED WITH ONE. IMPORTANT: 2 1- NO TAKEOVER AVAILABLE. ENGINE WILL SHUTDOWN UPON UNLOCK. 2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE. ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Accord PTS AT www.idatalink.com PAGE 4 OF 6 20181116 MODULE PROGRAMMING PROCEDURE - 1 OF 1 01 Set ignition to ON position. OFF ACC 07 ON START OFF ENGINE START STOP Set ignition to ON position. 12 Press and hold the brake pedal. Wait, LED 1 will turn solid GREEN for 2 seconds. 13 Press and release the module’s programming button. Set ignition to OFF position. 14 Release the brake pedal. ON START ENGINE START STOP 02 03 OFF ACC ACC Wait, LED 1 will flash GREEN rapidly. 08 Set ignition to OFF position. 09 ON START OFF ENGINE START STOP ACC ON START ENGINE START STOP 04 WARNING: Disconnect power last. Disconnect module from vehicle. 10 Press UNLOCK on the OEM remote. 15 Wait, LED 2 will flash GREEN. 05 Connect module to computer and proceed with extended programming. >> If the vehicle is equipped with a power liftgate: Open and close the power liftgate with the OEM keyfob. 16 Module Programming Procedure completed. 06 Connect power first. Connect module to vehicle. 11 START vehicle for 15 seconds. OFF ACC ON START ENGINE START STOP Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Accord PTS AT www.idatalink.com INSTALLATION CHECKLIST - 1 OF 2 PAGE 5 OF 6 20181116 CHECKLIST - WITH AFTERMARKET KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press the LOCK button once [1x] on the aftermarket keyfob. 9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question 1: Do the doors lock?  YES: Go to next step.  NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support. RAP and auto light shutdown test  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 10  4 Press the UNLOCK button once [1x] on the aftermarket keyfob.  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question 2: Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 11 Open hood.  12 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. 13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 3: Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start?  YES: Close trunk or hatch and go to next step.  NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.  NO: Go to next step. 14 Close hood. Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. 15 Enter vehicle and close the doors. Question 4: Does the driver side sliding door open? 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.  YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step. 17 Wait for the vehicle to start.  NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 18 Press brake pedal. 7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.  YES: Go to next step. 6  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. Question 10: Does the vehicle shut down? Question 5: Does the passenger side sliding door open?  YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.   NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 19 Exit vehicle. 8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 20 Installation checklist completed. Question 6: Does the vehicle remote start?  YES: Go to next step.  NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Accord PTS AT www.idatalink.com PAGE 6 OF 6 20181116 INSTALLATION CHECKLIST - 2 OF 2 CHECKLIST - WITH OEM KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 1: Does the vehicle remote start?  YES: Go to next step.  NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists. 4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Question 2: Does the vehicle shut down?  YES: Go to next step.  NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support. 5 RAP Shutdown test Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists. 6 Open hood. 7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 4: Does the vehicle remote start?  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.  NO: Go to next step. 9 Close hood. 10 Enter vehicle and close the doors. 11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. 12 Wait for the vehicle to start. 13 Press brake pedal. Question 5: Does the vehicle shut down?   YES: Go to next step. 14 Exit vehicle. 15 Installation checklist completed. NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Accord PTS AT www.idatalink.com INSTALL GUIDE 2017-2018 HONDA CR-V PTS AT DOCUMENT NUMBER REVISION DATE 20181116 FIRMWARE ADS-RSA-HA8-[HC3452AF] HARDWARE HC3452AF ACCESSORIES ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED. VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE. TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, noncompliant Certified Technicians or end users. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 www.idatalink.com T-HARNESS / COMPONENT LOCATOR - 1 OF 1 B PAGE 2 OF 9 20181116 A T002_H Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2017-2018 Honda CR-V PTS AT www.idatalink.com PAGE 3 OF 9 20181116 T-HARNESS / WIRING DIAGRAM - 1 OF 1 M1 ! M2 M3 M5 M4 ! CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY 1 NOT REQUIRED FOR BASIC INSTALLATION. INSERT WIRE TERMINALS IN J9-OUTPUT CONNECTOR FOR OPTIONAL OUTPUTS. REFER TO PRODUCT GUIDE FOR MORE INFORMATION. VS8 1: STEERING COLUMN LOCK MODULE CONNECTOR 1: STEERING COLUMN LOCK MODULE HARNESS - GRAY VS7 M1 01 ORANGE 02 RED 03 PURPLE 04 PINK/WHITE 05 PINK 06 WHITE 07 RED 08 BLACK 1: WHITE CUT NOT TWISTED RED WIRE AND CONNECT TO 12V CUT NOT TWISTED BLACK WIRE AND CONNECT TO GROUND 12V (+) RED - 01 3 RED GROUND (-) BLACK - 08 3 BLACK 7 6 5 4 3 2 1 14 13 12 11 10 9 8 2: GRAY LIGHTS OFF (-) PINK - 10 PARKING LIGHTS (-) GRAY - 11 14 13 12 11 10 9 8 7 6 5 4 3 2 1 28 27 26 25 24 23 22 21 20 19 18 17 16 15 VS2 3: BCM CONNECTOR 3: BCM HARNESS - BLUE M3 01 02 03 04 05 06 07 GRAY•SILVER DOT - HOOD (-) INPUT 08 09 10 M5 01 02 03 04 05 06 BODY CONTROL MODULE (B) VEHICLE WITHOUT STEERING LOCK ONLY 3 M2 01 02 03 04 05 06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT 07 08 09 10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT 11 12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT M4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 STEERING COLUMN LOCK, SILVER BOX (A) VEHICLE WITH STEERING LOCK ONLY 2 VS1 2 6 1 3 VS4 4: BCM CONNECTOR 5 4 4: BCM HARNESS - BLACK VS3 VS6 MS1 5: BCM CONNECTOR 5: BCM HARNESS - GRAY RELAY VS5 6: GRAY MS2 S-NET (DATA) LTGREEN - 35 ORANGE/BLACK - S-NET (DATA) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 HORN (-) 4 HOOD SWITCH T002_H Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 4 ADS-RSA-HA8-[HC3452AF]-EN 2017-2018 Honda CR-V PTS AT www.idatalink.com HARDWIRE / COMPONENT LOCATOR - 1 OF 1 PAGE 4 OF 9 20181116 A T002_W Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2017-2018 Honda CR-V PTS AT www.idatalink.com PAGE 5 OF 9 20181116 HARDWIRE / WIRING DIAGRAM - 1 OF 1 M1 ! ! M2 M3 CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY BODY CONTROL MODULE (A) M5 M4 1: WHITE 2 6 M1 01 ORANGE 02 RED 03 PURPLE 04 PINK/WHITE 05 PINK 06 WHITE 07 RED 08 BLACK GROUND (-) BLACK - 08 5 4 2: GRAY LIGHTS OFF (-) PINK - 10 PARKING LIGHTS (-) GRAY - 11 14 13 12 11 10 9 8 7 6 5 4 3 2 1 28 27 26 25 24 23 22 21 20 19 18 17 16 15 3: BLUE 12V (+) RED - 16 CANH (DATA) PINK - 20 CANL (DATA) BLUE -21 M3 01 BROWN•SILVER DOT 02 BLACK/WHITE•SILVER DOT 03 PURPLE•SILVER DOT 04 GREEN•SILVER DOT 05 PURPLE/WHITE•SILVER DOT 06 WHITE/BLUE•SILVER DOT 07 GRAY•SILVER DOT - HOOD (-) INPUT 08 BLUE•SILVER DOT 09 GRAY/BLACK•SILVER DOT 10 EMPTY 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 4: BLACK PTS (+) YELLOW - 18 ACCESSORY (+) GRAY - 32 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 5: GRAY M4 01 EMPTY 02 EMPTY 03 BROWN/RED - CANH 1 04 BROWN/YELLOW - CANL 1 05 BLUE/RED 06 BLUE/YELLOW 07 EMPTY 08 ORANGE 09 YELLOW - PTS (+) OUTPUT 10 EMPTY 11 GRAY/RED 12 GRAY/YELLOW 13 GREEN/RED 14 ORANGE/WHITE 15 BROWN - ACCESSORY (+) IN/OUT 16 ORANGE/BLACK - S-NET (DATA) 17 PINK - IGNITION (+) IN/OUT 18 PURPLE - STARTER (+) OUTPUT 19 RED - 12V (+) INPUT 20 BLACK - GROUND (-) IGNITION 1 (+) GRAY - 02 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 START (+) YELLOW - 06 6: GRAY S-NET (DATA) LTGREEN - 35 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 HORN (-) M5 01 GRAY/BLACK•BLUE DOT 02 WHITE/BLACK•BLUE DOT - IGNITION (+) 03 GRAY/RED•BLUE DOT 04 WHITE/RED•BLUE DOT - IGNITION (+) 05 GRAY•BLUE DOT 06 WHITE•BLUE DOT Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 1 3 M2 01 GREEN•BLACK DOT 02 BLUE•BLACK DOT 03 RED/WHITE•BLACK DOT 04 GREEN/WHITE•BLACK DOT 05 GREEN/BLACK•BLACK DOT 06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT 07 EMPTY 08 WHITE/PURPLE•BLACK DOT 09 PURPLE/BLACK•BLACK DOT 10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT 11 BROWN/BLACK•BLACK DOT 12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT T002_W 7 6 5 4 3 2 1 14 13 12 11 10 9 8 HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF 1 THE VEHICLE IS NOT EQUIPPED WITH ONE. IMPORTANT: 2 1- NO TAKEOVER AVAILABLE. ENGINE WILL SHUTDOWN UPON UNLOCK. 2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE. ADS-RSA-HA8-[HC3452AF]-EN 2017-2018 Honda CR-V PTS AT www.idatalink.com PAGE 6 OF 9 20181116 MODULE PROGRAMMING PROCEDURE - 1 OF 1 01 Set ignition to ON position. OFF ACC 07 ON START OFF ENGINE START STOP Set ignition to ON position. 12 Press and hold the brake pedal. Wait, LED 1 will turn solid GREEN for 2 seconds. 13 Press and release the module’s programming button. Set ignition to OFF position. 14 Release the brake pedal. ON START ENGINE START STOP 02 03 OFF ACC ACC Wait, LED 1 will flash GREEN rapidly. 08 Set ignition to OFF position. 09 ON START OFF ENGINE START STOP ACC ON START ENGINE START STOP 04 WARNING: Disconnect power last. Disconnect module from vehicle. 10 Press UNLOCK on the OEM remote. 15 Wait, LED 2 will flash GREEN. 05 Connect module to computer and proceed with extended programming. >> If the vehicle is equipped with a power liftgate: Open and close the power liftgate with the OEM keyfob. 16 Module Programming Procedure completed. 06 Connect power first. Connect module to vehicle. 11 START vehicle for 15 seconds. OFF ACC ON START ENGINE START STOP Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2017-2018 Honda CR-V PTS AT www.idatalink.com T-HARNESS / TAKEOVER PROCEDURE - 1 OF 1 >> The takeover procedure is only functional with an ADS-THR-HA8 T-harness installation. All vehicle doors must be closed and locked prior to remote start sequence. 06 Take over procedure completed. 01 Time restriction. Complete steps 2 to 5 within 45 seconds. >> Failure to follow procedure will result in vehicle engine shutdown. 02 Press unlock on OEM or aftermarket remote or request switch. 03 Open driver door and enter vehicle. 04 Close driver door. 05 Press and release BRAKE pedal. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN PAGE 7 OF 9 20181116 2017-2018 Honda CR-V PTS AT www.idatalink.com INSTALLATION CHECKLIST - 1 OF 2 PAGE 8 OF 9 20181116 CHECKLIST - WITH AFTERMARKET KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press the LOCK button once [1x] on the aftermarket keyfob. 9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question 1: Do the doors lock?  YES: Go to next step.  NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support. RAP and auto light shutdown test  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 10  4 Press the UNLOCK button once [1x] on the aftermarket keyfob.  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question 2: Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 11 Open hood.  12 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. 13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 3: Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start?  YES: Close trunk or hatch and go to next step.  NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.  NO: Go to next step. 14 Close hood. Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. 15 Enter vehicle and close the doors. Question 4: Does the driver side sliding door open? 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.  YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step. 17 Wait for the vehicle to start.  NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 18 Press brake pedal. 7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.  YES: Go to next step. 6  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. Question 10: Does the vehicle shut down? Question 5: Does the passenger side sliding door open?  YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.   NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 19 Exit vehicle. 8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 20 Installation checklist completed. Question 6: Does the vehicle remote start?  YES: Go to next step.  NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2017-2018 Honda CR-V PTS AT www.idatalink.com PAGE 9 OF 9 20181116 INSTALLATION CHECKLIST - 2 OF 2 CHECKLIST - WITH OEM KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 1: Does the vehicle remote start?  YES: Go to next step.  NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists. 4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Question 2: Does the vehicle shut down?  YES: Go to next step.  NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support. 5 RAP Shutdown test Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists. 6 Open hood. 7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 4: Does the vehicle remote start?  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.  NO: Go to next step. 9 Close hood. 10 Enter vehicle and close the doors. 11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. 12 Wait for the vehicle to start. 13 Press brake pedal. Question 5: Does the vehicle shut down?   YES: Go to next step. 14 Exit vehicle. 15 Installation checklist completed. NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2017-2018 Honda CR-V PTS AT www.idatalink.com INSTALL GUIDE 2016-2018 HONDA CIVIC PTS AT DOCUMENT NUMBER REVISION DATE 20181116 FIRMWARE ADS-RSA-HA8-[HC3452AF] HARDWARE HC3452AF ACCESSORIES ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED. VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE. TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, noncompliant Certified Technicians or end users. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 www.idatalink.com T-HARNESS / COMPONENT LOCATOR - 1 OF 1 B PAGE 2 OF 9 20181116 A T001_H Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2016-2018 Honda Civic PTS AT www.idatalink.com PAGE 3 OF 9 20181116 T-HARNESS / WIRING DIAGRAM - 1 OF 1 M1 ! M2 M3 M5 M4 ! CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY 1 NOT REQUIRED FOR BASIC INSTALLATION. INSERT WIRE TERMINALS IN J9-OUTPUT CONNECTOR FOR OPTIONAL OUTPUTS. REFER TO PRODUCT GUIDE FOR MORE INFORMATION. VS8 1: STEERING COLUMN LOCK MODULE CONNECTOR 1: STEERING COLUMN LOCK MODULE HARNESS - GRAY VS7 M1 01 ORANGE 02 RED 03 PURPLE 04 PINK/WHITE 05 PINK 06 WHITE 07 RED 08 BLACK 1: WHITE CUT NOT TWISTED RED WIRE AND CONNECT TO 12V CUT NOT TWISTED BLACK WIRE AND CONNECT TO GROUND 12V (+) YELLOW - 01 3 RED GROUND (-) BLACK - 08 3 BLACK 7 6 5 4 3 2 1 14 13 12 11 10 9 8 2: GRAY LIGHTS OFF (-) PINK - 10 PARKING LIGHTS (-) GRAY - 11 14 13 12 11 10 9 8 7 6 5 4 3 2 1 28 27 26 25 24 23 22 21 20 19 18 17 16 15 VS2 3: BCM CONNECTOR 3: BCM HARNESS - BLUE M3 01 02 03 04 05 06 07 GRAY•SILVER DOT - HOOD (-) INPUT 08 09 10 M5 01 02 03 04 05 06 BODY CONTROL MODULE (B) VEHICLE WITHOUT STEERING LOCK ONLY 3 M2 01 02 03 04 05 06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT 07 08 09 10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT 11 12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT M4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 STEERING COLUMN LOCK, SILVER BOX (A) VEHICLE WITH STEERING LOCK ONLY 2 VS1 2 6 1 3 VS4 4: BCM CONNECTOR 5 4 4: BCM HARNESS - BLACK VS3 VS6 MS1 5: BCM CONNECTOR 5: BCM HARNESS - GRAY RELAY VS5 6: GRAY MS2 S-NET (DATA) RED - 35 ORANGE/BLACK - S-NET (DATA) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 HORN (-) 4 HOOD SWITCH T001_H Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 4 ADS-RSA-HA8-[HC3452AF]-EN 2016-2018 Honda Civic PTS AT www.idatalink.com HARDWIRE / COMPONENT LOCATOR - 1 OF 1 PAGE 4 OF 9 20181116 A T001_W Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2016-2018 Honda Civic PTS AT www.idatalink.com PAGE 5 OF 9 20181116 HARDWIRE / WIRING DIAGRAM - 1 OF 1 M1 ! ! M2 M3 CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY BODY CONTROL MODULE (A) M5 M4 1: WHITE 2 6 M1 01 ORANGE 02 RED 03 PURPLE 04 PINK/WHITE 05 PINK 06 WHITE 07 RED 08 BLACK GROUND (-) BLACK - 08 5 4 2: GRAY LIGHTS OFF (-) PINK - 10 PARKING LIGHTS (-) GRAY - 11 14 13 12 11 10 9 8 7 6 5 4 3 2 1 28 27 26 25 24 23 22 21 20 19 18 17 16 15 3: BLUE 12V (+) YELLOW - 16 CANH (DATA) PINK - 20 CANL (DATA) BLUE -21 M3 01 BROWN•SILVER DOT 02 BLACK/WHITE•SILVER DOT 03 PURPLE•SILVER DOT 04 GREEN•SILVER DOT 05 PURPLE/WHITE•SILVER DOT 06 WHITE/BLUE•SILVER DOT 07 GRAY•SILVER DOT - HOOD (-) INPUT 08 BLUE•SILVER DOT 09 GRAY/BLACK•SILVER DOT 10 EMPTY 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 4: BLACK PTS (+) WHITE - 18 ACCESSORY (+) GRAY - 32 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 5: GRAY M4 01 EMPTY 02 EMPTY 03 BROWN/RED - CANH 1 04 BROWN/YELLOW - CANL 1 05 BLUE/RED 06 BLUE/YELLOW 07 EMPTY 08 ORANGE 09 YELLOW - PTS (+) OUTPUT 10 EMPTY 11 GRAY/RED 12 GRAY/YELLOW 13 GREEN/RED 14 ORANGE/WHITE 15 BROWN - ACCESSORY (+) IN/OUT 16 ORANGE/BLACK - S-NET (DATA) 17 PINK - IGNITION (+) IN/OUT 18 PURPLE - STARTER (+) OUTPUT 19 RED - 12V (+) INPUT 20 BLACK - GROUND (-) IGNITION 1 (+) PINK - 02 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 START (+) YELLOW - 06 6: GRAY S-NET (DATA) RED - 35 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 HORN (-) M5 01 GRAY/BLACK•BLUE DOT 02 WHITE/BLACK•BLUE DOT - IGNITION (+) 03 GRAY/RED•BLUE DOT 04 WHITE/RED•BLUE DOT - IGNITION (+) 05 GRAY•BLUE DOT 06 WHITE•BLUE DOT Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 1 3 M2 01 GREEN•BLACK DOT 02 BLUE•BLACK DOT 03 RED/WHITE•BLACK DOT 04 GREEN/WHITE•BLACK DOT 05 GREEN/BLACK•BLACK DOT 06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT 07 EMPTY 08 WHITE/PURPLE•BLACK DOT 09 PURPLE/BLACK•BLACK DOT 10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT 11 BROWN/BLACK•BLACK DOT 12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT T001_W 7 6 5 4 3 2 1 14 13 12 11 10 9 8 HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF 1 THE VEHICLE IS NOT EQUIPPED WITH ONE. IMPORTANT: 2 1- NO TAKEOVER AVAILABLE. ENGINE WILL SHUTDOWN UPON UNLOCK. 2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE. ADS-RSA-HA8-[HC3452AF]-EN 2016-2018 Honda Civic PTS AT www.idatalink.com PAGE 6 OF 9 20181116 MODULE PROGRAMMING PROCEDURE - 1 OF 1 01 Set ignition to ON position. OFF ACC 07 ON START OFF ENGINE START STOP Set ignition to ON position. 12 Press and hold the brake pedal. Wait, LED 1 will turn solid GREEN for 2 seconds. 13 Press and release the module’s programming button. Set ignition to OFF position. 14 Release the brake pedal. ON START ENGINE START STOP 02 03 OFF ACC ACC Wait, LED 1 will flash GREEN rapidly. 08 Set ignition to OFF position. 09 ON START OFF ENGINE START STOP ACC ON START ENGINE START STOP 04 WARNING: Disconnect power last. Disconnect module from vehicle. 10 Press UNLOCK on the OEM remote. 15 Wait, LED 2 will flash GREEN. 05 Connect module to computer and proceed with extended programming. >> If the vehicle is equipped with a power liftgate: Open and close the power liftgate with the OEM keyfob. 16 Module Programming Procedure completed. 06 Connect power first. Connect module to vehicle. 11 START vehicle for 15 seconds. OFF ACC ON START ENGINE START STOP Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2016-2018 Honda Civic PTS AT www.idatalink.com T-HARNESS / TAKEOVER PROCEDURE - 1 OF 1 >> The takeover procedure is only functional with an ADS-THR-HA8 T-harness installation. All vehicle doors must be closed and locked prior to remote start sequence. 06 Take over procedure completed. 01 Time restriction. Complete steps 2 to 5 within 45 seconds. >> Failure to follow procedure will result in vehicle engine shutdown. 02 Press unlock on OEM or aftermarket remote or request switch. 03 Open driver door and enter vehicle. 04 Close driver door. 05 Press and release BRAKE pedal. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN PAGE 7 OF 9 20181116 2016-2018 Honda Civic PTS AT www.idatalink.com INSTALLATION CHECKLIST - 1 OF 2 PAGE 8 OF 9 20181116 CHECKLIST - WITH AFTERMARKET KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press the LOCK button once [1x] on the aftermarket keyfob. 9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question 1: Do the doors lock?  YES: Go to next step.  NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support. RAP and auto light shutdown test  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 10  4 Press the UNLOCK button once [1x] on the aftermarket keyfob.  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question 2: Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 11 Open hood.  12 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. 13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 3: Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start?  YES: Close trunk or hatch and go to next step.  NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.  NO: Go to next step. 14 Close hood. Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. 15 Enter vehicle and close the doors. Question 4: Does the driver side sliding door open? 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.  YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step. 17 Wait for the vehicle to start.  NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 18 Press brake pedal. 7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.  YES: Go to next step. 6  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. Question 10: Does the vehicle shut down? Question 5: Does the passenger side sliding door open?  YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.   NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 19 Exit vehicle. 8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 20 Installation checklist completed. Question 6: Does the vehicle remote start?  YES: Go to next step.  NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2016-2018 Honda Civic PTS AT www.idatalink.com PAGE 9 OF 9 20181116 INSTALLATION CHECKLIST - 2 OF 2 CHECKLIST - WITH OEM KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 1: Does the vehicle remote start?  YES: Go to next step.  NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists. 4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Question 2: Does the vehicle shut down?  YES: Go to next step.  NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support. 5 RAP Shutdown test Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists. 6 Open hood. 7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 4: Does the vehicle remote start?  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.  NO: Go to next step. 9 Close hood. 10 Enter vehicle and close the doors. 11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. 12 Wait for the vehicle to start. 13 Press brake pedal. Question 5: Does the vehicle shut down?   YES: Go to next step. 14 Exit vehicle. 15 Installation checklist completed. NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2016-2018 Honda Civic PTS AT www.idatalink.com INSTALL GUIDE 2018 HONDA ODYSSEY PTS AT DOCUMENT NUMBER REVISION DATE 20181116 FIRMWARE ADS-RSA-HA8-[HC3452AF] HARDWARE HC3452AF ACCESSORIES ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED. VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE. TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, noncompliant Certified Technicians or end users. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 www.idatalink.com T-HARNESS / COMPONENT LOCATOR - 1 OF 1 B PAGE 2 OF 9 20181116 A T003_H Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Odyssey PTS AT www.idatalink.com PAGE 3 OF 9 20181116 T-HARNESS / WIRING DIAGRAM - 1 OF 1 M1 ! M2 M3 M5 M4 ! CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY 1 NOT REQUIRED FOR BASIC INSTALLATION. INSERT WIRE TERMINALS IN J9-OUTPUT CONNECTOR FOR OPTIONAL OUTPUTS. REFER TO PRODUCT GUIDE FOR MORE INFORMATION. VS8 1: STEERING COLUMN LOCK MODULE CONNECTOR 1: STEERING COLUMN LOCK MODULE HARNESS - GRAY VS7 M1 01 ORANGE 02 RED 03 PURPLE 04 PINK/WHITE 05 PINK 06 WHITE 07 RED 08 BLACK 1: WHITE CUT NOT TWISTED RED WIRE AND CONNECT TO 12V CUT NOT TWISTED BLACK WIRE AND CONNECT TO GROUND 12V (+) BROWN - 01 3 RED GROUND (-) BLACK - 08 3 BLACK 7 6 5 4 3 2 1 14 13 12 11 10 9 8 2: GRAY LIGHTS OFF (-) PINK - 10 PARKING LIGHTS (-) WHITE - 11 14 13 12 11 10 9 8 7 6 5 4 3 2 1 28 27 26 25 24 23 22 21 20 19 18 17 16 15 VS2 3: BCM CONNECTOR 3: BCM HARNESS - BLUE M3 01 02 03 04 05 06 07 GRAY•SILVER DOT - HOOD (-) INPUT 08 09 10 M5 01 02 03 04 05 06 BODY CONTROL MODULE (B) VEHICLE WITHOUT STEERING LOCK ONLY 3 M2 01 02 03 04 05 06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT 07 08 09 10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT 11 12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT M4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 STEERING COLUMN LOCK, SILVER BOX (A) VEHICLE WITH STEERING LOCK ONLY 2 VS1 2 6 1 3 VS4 4: BCM CONNECTOR 5 4 4: BCM HARNESS - BLACK VS3 VS6 MS1 5: BCM CONNECTOR 5: BCM HARNESS - GRAY RELAY VS5 6: GRAY MS2 S-NET (DATA) LTGREEN - 35 ORANGE/BLACK - S-NET (DATA) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 HORN (-) 4 HOOD SWITCH T003_H Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 4 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Odyssey PTS AT www.idatalink.com HARDWIRE / COMPONENT LOCATOR - 1 OF 1 PAGE 4 OF 9 20181116 A T003_W Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Odyssey PTS AT www.idatalink.com PAGE 5 OF 9 20181116 HARDWIRE / WIRING DIAGRAM - 1 OF 1 M1 ! ! M2 M3 CUT LOOP FOR AUTOMATIC TRANSMISSION ONLY BCM, ABOVE DASH FUSEBOX (A) M5 M4 1: WHITE 2 6 M1 01 ORANGE 02 RED 03 PURPLE 04 PINK/WHITE 05 PINK 06 WHITE 07 RED 08 BLACK GROUND (-) BLACK - 08 5 4 2: GRAY LIGHTS OFF (-) PINK - 10 PARKING LIGHTS (-) WHITE - 11 14 13 12 11 10 9 8 7 6 5 4 3 2 1 28 27 26 25 24 23 22 21 20 19 18 17 16 15 3: BLUE 12V (+) RED - 16 CANH (DATA) WHITE - 20 CANL (DATA) TAN -21 M3 01 BROWN•SILVER DOT 02 BLACK/WHITE•SILVER DOT 03 PURPLE•SILVER DOT 04 GREEN•SILVER DOT 05 PURPLE/WHITE•SILVER DOT 06 WHITE/BLUE•SILVER DOT 07 GRAY•SILVER DOT - HOOD (-) INPUT 08 BLUE•SILVER DOT 09 GRAY/BLACK•SILVER DOT 10 EMPTY 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 4: BLACK PTS (+) YELLOW - 18 ACCESSORY (+) GRAY - 32 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 5: TAN M4 01 EMPTY 02 EMPTY 03 BROWN/RED - CANH 1 04 BROWN/YELLOW - CANL 1 05 BLUE/RED 06 BLUE/YELLOW 07 EMPTY 08 ORANGE 09 YELLOW - PTS (+) OUTPUT 10 EMPTY 11 GRAY/RED 12 GRAY/YELLOW 13 GREEN/RED 14 ORANGE/WHITE 15 BROWN - ACCESSORY (+) IN/OUT 16 ORANGE/BLACK - S-NET (DATA) 17 PINK - IGNITION (+) IN/OUT 18 PURPLE - STARTER (+) OUTPUT 19 RED - 12V (+) INPUT 20 BLACK - GROUND (-) IGNITION 1 (+) WHITE - 02 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 START (+) GREEN - 06 6: GRAY S-NET (DATA) LTGREEN - 35 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 HORN (-) M5 01 GRAY/BLACK•BLUE DOT 02 WHITE/BLACK•BLUE DOT - IGNITION (+) 03 GRAY/RED•BLUE DOT 04 WHITE/RED•BLUE DOT - IGNITION (+) 05 GRAY•BLUE DOT 06 WHITE•BLUE DOT Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 1 3 M2 01 GREEN•BLACK DOT 02 BLUE•BLACK DOT 03 RED/WHITE•BLACK DOT 04 GREEN/WHITE•BLACK DOT 05 GREEN/BLACK•BLACK DOT 06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT 07 EMPTY 08 WHITE/PURPLE•BLACK DOT 09 PURPLE/BLACK•BLACK DOT 10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT 11 BROWN/BLACK•BLACK DOT 12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT T003_W 7 6 5 4 3 2 1 14 13 12 11 10 9 8 HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF 1 THE VEHICLE IS NOT EQUIPPED WITH ONE. IMPORTANT: 2 1- NO TAKEOVER AVAILABLE. ENGINE WILL SHUTDOWN UPON UNLOCK. 2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE. ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Odyssey PTS AT www.idatalink.com PAGE 6 OF 9 20181116 MODULE PROGRAMMING PROCEDURE - 1 OF 1 01 Set ignition to ON position. OFF ACC 07 ON START OFF ENGINE START STOP Set ignition to ON position. 12 Press and hold the brake pedal. Wait, LED 1 will turn solid GREEN for 2 seconds. 13 Press and release the module’s programming button. Set ignition to OFF position. 14 Release the brake pedal. ON START ENGINE START STOP 02 03 OFF ACC ACC Wait, LED 1 will flash GREEN rapidly. 08 Set ignition to OFF position. 09 ON START OFF ENGINE START STOP ACC ON START ENGINE START STOP 04 WARNING: Disconnect power last. Disconnect module from vehicle. 10 Press UNLOCK on the OEM remote. 15 Wait, LED 2 will flash GREEN. 05 Connect module to computer and proceed with extended programming. >> If the vehicle is equipped with a power liftgate: Open and close the power liftgate with the OEM keyfob. 16 Module Programming Procedure completed. 06 Connect power first. Connect module to vehicle. 11 START vehicle for 15 seconds. OFF ACC ON START ENGINE START STOP Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Odyssey PTS AT www.idatalink.com T-HARNESS / TAKEOVER PROCEDURE - 1 OF 1 >> The takeover procedure is only functional with an ADS-THR-HA8 T-harness installation. All vehicle doors must be closed and locked prior to remote start sequence. 06 Take over procedure completed. 01 Time restriction. Complete steps 2 to 5 within 45 seconds. >> Failure to follow procedure will result in vehicle engine shutdown. 02 Press unlock on OEM or aftermarket remote or request switch. 03 Open driver door and enter vehicle. 04 Close driver door. 05 Press and release BRAKE pedal. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN PAGE 7 OF 9 20181116 2018 Honda Odyssey PTS AT www.idatalink.com INSTALLATION CHECKLIST - 1 OF 2 PAGE 8 OF 9 20181116 CHECKLIST - WITH AFTERMARKET KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press the LOCK button once [1x] on the aftermarket keyfob. 9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question 1: Do the doors lock?  YES: Go to next step.  NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support. RAP and auto light shutdown test  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 10  4 Press the UNLOCK button once [1x] on the aftermarket keyfob.  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question 2: Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 11 Open hood.  12 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. 13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 3: Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start?  YES: Close trunk or hatch and go to next step.  NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.  NO: Go to next step. 14 Close hood. Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. 15 Enter vehicle and close the doors. Question 4: Does the driver side sliding door open? 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.  YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step. 17 Wait for the vehicle to start.  NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 18 Press brake pedal. 7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.  YES: Go to next step. 6  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. Question 10: Does the vehicle shut down? Question 5: Does the passenger side sliding door open?  YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.   NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 19 Exit vehicle. 8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 20 Installation checklist completed. Question 6: Does the vehicle remote start?  YES: Go to next step.  NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Odyssey PTS AT www.idatalink.com PAGE 9 OF 9 20181116 INSTALLATION CHECKLIST - 2 OF 2 CHECKLIST - WITH OEM KEYFOB 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 1: Does the vehicle remote start?  YES: Go to next step.  NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists. 4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Question 2: Does the vehicle shut down?  YES: Go to next step.  NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support. 5 RAP Shutdown test Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?  YES: Go to next step.  NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists. 6 Open hood. 7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. Question 4: Does the vehicle remote start?  YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.  NO: Go to next step. 9 Close hood. 10 Enter vehicle and close the doors. 11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle. 12 Wait for the vehicle to start. 13 Press brake pedal. Question 5: Does the vehicle shut down?   YES: Go to next step. 14 Exit vehicle. 15 Installation checklist completed. NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2018 ADS-RSA-HA8-[HC3452AF]-EN 2018 Honda Odyssey PTS AT www.idatalink.com