Ford - Tourneo Connect - Owners Manual - 2011 - 2011 (2)

FORD TOURNEOCONNECT / TRANSITCONNECT Owner's Manual The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted. © Ford Motor Company 2011 All rights reserved. Part Number: CG3526en 03/2011 20110421083357 Table of Contents Introduction Alarm About This Manual...........................................5 Symbols Glossary.............................................5 Parts and Accessories....................................6 Principle of Operation..................................29 Arming the alarm...........................................29 Disarming the alarm.....................................29 At a Glance Steering Wheel At a Glance..........................................................7 Adjusting the Steering Wheel...................30 Audio Control..................................................30 Voice Control.....................................................31 Child Safety Child Seats..........................................................11 Booster Seats...................................................12 Child Seat Positioning...................................13 ISOFIX Anchor Points....................................15 Child Safety Locks..........................................15 Wipers and Washers Windscreen Wipers.......................................33 Autowipers........................................................33 Windscreen Washers....................................34 Rear Window Wiper and Washers...........34 Checking the Wiper Blades........................35 Changing the Wiper Blades........................35 Occupant protection Principle of Operation....................................17 Fastening the seat belts...............................18 Seat belt height adjustment.......................19 Seat belt reminder..........................................19 Using seat belts during pregnancy...........19 Disabling the passenger airbag................20 Lighting Lighting Control...............................................37 Autolamps........................................................38 Front Fog Lamps............................................38 Rear Fog Lamps..............................................38 Hazard Warning Flashers............................39 Headlamp Levelling......................................39 Direction Indicators.......................................40 Interior Lamps.................................................40 Changing a Bulb..............................................41 Bulb Specification Chart.............................46 Keys and Remote Controls General Information on Radio Frequencies...................................................21 Programming the remote control.............21 Changing the remote control battery.............................................................21 Locks Windows and Mirrors Locking and Unlocking.................................23 Power Windows..............................................47 Exterior Mirrors................................................47 Electric exterior mirrors................................47 Rear Quarter Windows................................48 Auto-Dimming Mirror...................................48 Engine immobiliser Principle of Operation..................................28 Coded keys.......................................................28 Arming the engine immobiliser................28 Disarming the engine immobiliser...........28 Instrument Cluster Gauges...............................................................49 1 Table of Contents Warning Lamps and Indicators..................51 Audible Warnings and Indicators.............53 Diesel Particulate Filter.................................81 Fuel and Refuelling Information Displays Safety Precautions........................................82 Fuel Quality - Diesel......................................82 Catalytic Converter........................................82 Fuel filler flap...................................................83 Refuelling..........................................................83 Fuel Consumption.........................................83 Technical Specifications.............................83 General Information......................................55 Trip Computer..................................................57 Personalised Settings..................................58 Information Messages.................................59 Climate Control Principle of Operation..................................62 Air Vents............................................................62 Heated Windows and Mirrors....................62 Manual Climate Control..............................63 Auxiliary Heater..............................................66 Transmission Manual Transmission...................................85 Brakes Principle of Operation..................................86 Hints on Driving With Anti-Lock Brakes............................................................86 Parking Brake..................................................86 Seats Sitting in the Correct Position....................70 Front Seats.......................................................70 Head Restraints...............................................73 Rear Seats.........................................................73 Heated Seats...................................................76 Stability Control Principle of Operation...................................87 Using Stability Control.................................87 Convenience features Traction Control Instrument Lighting Dimmer......................77 Cigar Lighter......................................................77 Auxiliary Power Points..................................77 Cup Holders......................................................78 Storage compartments...............................78 Map Pockets....................................................78 Auxiliary input (AUX IN) socket................79 Floor Mats.........................................................79 Principle of Operation..................................88 Using Traction Control.................................88 Hill Start Assist Principle of Operation..................................89 Using hill start assist....................................89 Parking Aids Principle of Operation...................................91 Using the Parking Aid....................................91 Starting and Stopping the Engine General Information.....................................80 Ignition Switch................................................80 Starting a Diesel Engine..............................80 Switching Off the Engine............................80 Load Carrying General Information......................................92 Roof Racks and Load Carriers...................92 Cargo Nets........................................................92 2 Table of Contents Repairing Minor Paint Damage.................113 Towing Towing a Trailer...............................................94 Vehicle battery Driving Hints Jump-Starting the Vehicle.........................114 Running-In........................................................95 Cold Weather Precautions.........................95 Wheels and Tyres General Information.....................................115 Changing a Road Wheel.............................115 Tyre Care...........................................................119 Using Winter Tyres.......................................120 Using Snow Chains......................................120 Technical Specifications............................120 Roadside Emergencies First Aid Kit.......................................................96 Warning Triangle............................................96 Fuses Fuse Box Locations........................................97 Changing a Fuse.............................................98 Fuse Labels......................................................98 Fuse Specification Chart............................99 Vehicle identification Vehicle Identification Plate.......................123 Vehicle Identification Number.................123 Load apportioning valve (LAV) plate...............................................................123 Vehicle recovery Towing Points................................................103 Towing the Vehicle on Four Wheels......103 Capacities and Specifications Maintenance Technical Specifications............................124 General Information....................................105 Opening and Closing the Bonnet...........105 Under Bonnet Overview - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel...............107 Engine Oil Dipstick - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel..............................................108 Engine Oil Check..........................................108 Engine Coolant Check................................109 Brake and Clutch Fluid Check.................109 Power Steering Fluid Check......................110 Washer Fluid Check......................................110 Technical Specifications.............................110 Audio introduction Important audio information...................130 Audio unit overview Audio unit overview.......................................131 Audio system security Security code..................................................133 Lost security code.........................................133 Entering a security code.............................133 Incorrect security code...............................133 Audio unit clock and date displays Vehicle care Setting the clock and date on the audio unit.................................................................134 Cleaning the Exterior....................................112 Cleaning the Interior.....................................112 3 Table of Contents Telephone setup...........................................145 Bluetooth setup............................................146 Telephone controls......................................146 Using the telephone - Vehicles Without: Navigation System...................................147 Using the telephone - Vehicles With: Navigation System..................................148 Audio unit operation On/off control................................................135 Bass/treble control......................................135 Balance/fade control..................................135 Audio menu control.....................................135 Station preset buttons................................137 Waveband button.........................................137 Autostore control..........................................137 Traffic information control........................137 Station tuning control.................................138 Voice control Principle of Operation..................................151 Using voice control........................................151 Audio unit commands................................152 Telephone commands...............................158 Navigation system commands...............162 Audio unit menus Automatic volume control........................139 Audio distortion reduction (CLIP)..........139 Alternative frequencies..............................139 Regional mode (REG)................................140 News broadcasts.........................................140 Appendices Type approvals..............................................163 Electromagnetic compatibility................163 Compact disc player Loading compact discs...............................141 Track selection................................................141 Compact disc playback..............................141 Fast forward/reverse....................................141 Shuffle/random.............................................141 Compact disc track compression...........141 Compact disc track scanning...................141 Ejecting compact discs..............................142 Repeat compact disc tracks.....................142 Ending compact disc playback...............142 Auxiliary input (AUX IN) socket Auxiliary input (AUX IN) socket..............143 Audio troubleshooting Audio troubleshooting................................144 Telephone General Information....................................145 4 Introduction Additionally an efficient pollen filter protects the passengers against allergen particles in the outdoor air. ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it. For more information, contact TÜV at www.tuv.com. SYMBOLS GLOSSARY WARNING Symbols in this handbook Always drive with due care and attention when using and operating the controls and features on your vehicle. WARNING You risk death or serious injury to yourself and others if you do not follow the instructions highlighted by the warning symbol. Note: This manual describes product features and options available throughout the range, sometimes even before they are generally available. It may describe options not fitted to your vehicle. CAUTION You risk damaging your vehicle if you do not follow the instructions highlighted by the caution symbol. Note: Some of the illustrations in this manual may be used for different models, so may appear different to your vehicle. However, the essential information in the illustrations is always correct. Symbols on your vehicle Note: Always use and operate your vehicle in line with all applicable laws and regulations. Note: Pass on this manual when selling your vehicle. It is an integral part of the vehicle. When you see these symbols, read and follow the relevant instructions in this handbook before touching or attempting adjustment of any kind. This vehicle has received the endorsement of TÜV, the accredited international testing organisation, for its allergy-friendly properties. All materials used in the manufacture of the interior of this vehicle meet strict requirements of the TÜV TOXPROOF Criteria Catalogue for Vehicle Interiors by TÜV Produkt and Umwelt GmbH and are designed to minimize the risk of allergic reactions. 5 Introduction PARTS AND ACCESSORIES Genuine Ford parts and accessories have been designed specifically for your vehicle. Unless we have specifically stated, we have not tested non-Ford parts and accessories and, therefore, we will not guarantee that they are suitable for your vehicle. We recommend that you ask your Ford Dealer for advice on parts and accessories suitable for your vehicle. 6 At a Glance AT A GLANCE Instrument panel overview Left-hand drive A S B R C Q D E F P O E115781 7 H G N M L I K J At a Glance Right-hand drive I J G K L M H N C Q E F D P O B R A S E115782 A Air vent. See Climate Control (page 62). B Headlamp levelling control. See Headlamp Levelling (page 39). C Direction indicators. See Lighting (page 37). D Instrument cluster. See Gauges (page 49). E Information display. See (page 55). F Wiper lever. See Wipers and Washers (page 33). G Hazard warning flasher switch. See Lighting (page 37). H Passenger airbag disabled indicatator. See Disabling the passenger airbag (page 20). 8 At a Glance I Heated windscreen and heated rear window switches. See Climate Control (page 62). J Audio or navigation unit. See separate handbook. K Climate controls. See Climate Control (page 62). L Recirculated air switch. See Climate Control (page 62). M Air conditioning switch. See Climate Control (page 62). N Cigar lighter or auxiliary power socket. See Convenience features (page 77). O Ignition switch. p Steering wheel adjustment lever. See Steering Wheel (page 30). Q Audio control. See Audio Control (page 30). R Instrument lighting dimmer. See Instrument Lighting Dimmer (page 77). S Lighting controls. See Lighting (page 37). Locking and unlocking the doors with the remote control Locking and unlocking the doors with the key Allvehicles Turn the top of the key towards the front of the vehicle twice to unlock all doors. A Transit Connect Turn the top of the key towards the front of the vehicle to unlock the front doors. B C E87379 Tourneo Connect Turn the top of the key towards the front of the vehicle to unlock the front and sliding doors. A Unlock B Lock C Luggage compartment lid unlock Transit Connect See Locking and Unlocking (page 23). Press button A once to unlock the front doors only. Press button A twice to unlock all doors. Press button C once to unlock the sliding door and the luggage compartment lid. Tourneo Connect Press button A once to unlock the front and sliding doors. Press button A twice to unlock all doors. 9 At a Glance Press button C once to unlock the luggage compartment lid. All vehicles Press button B once to lock all doors and the luggage compartment lid. Press button B twice within three seconds to activate double locking. Note: The anti-theft alarm system can also be armed independently from the double locking system by turning the door key to the lock position. 3 See Locking and Unlocking (page 23). E95179 WARNING Adjusting the steering wheel Make sure that you fully engage the locking lever when returning it to its original position. WARNING Never adjust the steering wheel when the vehicle is moving. See Adjusting the Steering Wheel (page 30). 2 Engine idle speed after starting The engine may idle at a higher speed than normal immediately after starting from cold. 2 See Starting and Stopping the Engine (page 80). 1 E95178 10 Child Safety CHILD SEATS WARNINGS Do not leave unattended children in your vehicle. If your vehicle has been involved in an accident, have the child restraints checked by properly trained technicians. Note: Mandatory use of child restraints varies from country to country. E133140 Only child restraints certified to ECE-R44.03 (or later) have been tested and approved for use in your vehicle. A choice of these are available from your Dealer. Child restraints for different mass groups Use the correct child restraint as follows: Baby safety seat E68916 WARNINGS Secure children that are less than 150 centimetres (59 inches) tall in a suitable, approved child restraint, in the rear seat. Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an air bag in front of it! Read and follow the manufacturer’s instructions when you are fitting a child restraint. E68918 Secure children that weigh less than 13 kilograms (29 pounds) in a rearward facing baby safety seat (Group 0+) in the rear seat. Do not modify child restraints in any way. Do not hold a child on your lap when the vehicle is moving. 11 Child Safety Child safety seat CAUTION When using a child seat on a rear seat, make sure that the child seat rests tightly against the vehicle seat. It may be necessary to lift or remove the head restraint. See Head Restraints (page 73). Booster seat (Group 2) E68920 Secure children that weigh between 13 and 18 kilograms (29 and 40 pounds) in a child safety seat (Group 1) in the rear seat. BOOSTER SEATS E70710 WARNINGS Do not install a booster seat or a booster cushion with only the lap strap of the seat belt. We recommend that you use a booster seat that combines a cushion with a backrest instead of a booster cushion only. The raised seating position will allow you to position the shoulder strap of the adult seat belt over the centre of your child’s shoulder and the lap strap tightly across its hips. Do not install a booster seat or a booster cushion with a seat belt that is slack or twisted. Do not put the seat belt under your child’s arm or behind its back. Do not use pillows, books or towels to boost your child’s height. Make sure that your children sit in an upright position. Secure children that weigh more than 15 kilograms (33 pounds) but are less than 150 centimetres (59 inches) tall in a booster seat or a booster cushion. 12 Child Safety Booster cushion (Group 3) CHILD SEAT POSITIONING WARNINGS Please consult your Dealer for the latest details relating to Ford recommended child seats. When using a forward facing child seat on a rear seat, always remove the head restraint from that seat. See Head Restraints (page 73). When using a child seat with a seat belt, make sure that the seat belt is not slack or twisted. Note: When using a child seat on a front seat, always adjust the front passenger seat to its fully rearwards position. If it proves difficult to tighten the lap section of the seat belt without slack remaining, adjust the seatback to the fully upright position and raise the height of the seat. See Front Seats (page 70). E68924 Mass group categories Seating positions 0 0+ Up to 10 kg Up to 13 kg 1 2 3 9 to 18 kg 15 to 25 kg 22 to 36 kg Front passenger seat with airbag ON X X Front passenger seat with airbag OFF U 1 U 1 U 1 U 1 U Second row rear seats U U U U U Third row rear seats U U U U U UF 1 1 UF 1 UF 1 X Not suitable for children in this mass group. U Suitable for universal category child restraints approved for use in this mass group. U¹ Suitable for universal category child seats approved for use in this mass group. However, we recommend that you secure children in a government approved child seat, in the rear seat. 13 Child Safety UF¹ Suitable for universal category forward facing child seats approved for use in this mass group. However, we recommend that you secure children in a government approved child seat, in the rear seat. ISOFIX child seats Mass group categories 0+ 1 Rear facing Forward facing Up to 13 kg 9 - 18 kg Seating positions Front seat Size class Not ISOFIX equipped Seat type Rear outboard seat ISOFIX Rear centre seat Size class C, D, E Seat type IL ** Size class A, B, B1, C, D * *** IL, IUF Not ISOFIX equipped Seat type Third row rear seats * Size class Not ISOFIX equipped Seat type IL Suitable for particular ISOFIX child restraints systems of the semi-universal category. Please consult child restraints systems suppliers' vehicle recommendation lists. IUF Suitable for ISOFIX forward facing child restraints systems of universal category approved for use in this mass group and ISOFIX size class. * The ISOFIX size class for both universal and semi-universal child restraints systems is defined by the capital letters A to G. These identification letters are displayed on ISOFIX child restraints. ** At time of publishing the recommended Group O+ ISOFIX baby safety seat is the Britax Romer Baby Safe. Please consult your Dealer for the latest details relating to Ford recommended child seats. *** At time of publishing the recommended Group 1 ISOFIX child seat is the Britax Romer Duo. Please consult your Dealer for the latest details relating to Ford recommended child seats. 14 Child Safety ISOFIX ANCHOR POINTS WARNINGS Always use the top tether anchor point at the base of the second row seatback when the third row is occupied. Tourneo Connect 1. Remove the head restraint. See Head Restraints (page 73). E68945 WARNING Use only ISOFIX child seats we recommend. E75771 2. Route the tether strap to the anchor point. 3. Push the child seat back firmly to engage the ISOFIX lower anchor points. 4. Tighten the tether strap in line with the child seat manufacturer's instructions. You can fit ISOFIX child restraints using the ISOFIX anchor points. The ISOFIX system comprises of two rigid attachment arms on the child restraint that attach to anchor points on the rear seats, where the cushion and backrest meet. Tether anchor points may also be fitted. CHILD SAFETY LOCKS Attaching a child restraint with a top tether Tourneo Connect WARNINGS Use an anti-rotation device when using the ISOFIX system. We recommend that you use a top tether or a support leg. WARNING You cannot open the doors from inside if you have put the child safety locks on. For ISOFIX child seats fitted with a top tether, always use a top tether anchor point. Note: Child safety locks are only fitted to sliding doors. Do not attach a tether strap to anything other than the correct tether anchor point. 15 Child Safety A B E75766 A Lock B Unlock 16 Occupant protection Driver and front passenger airbags PRINCIPLE OF OPERATION Airbags WARNINGS Do not modify the front of your vehicle in any way. This could adversely affect deployment of the airbags. Original text according to ECE R94.01: Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of it! E74302 Wear a seat belt and keep sufficient distance between yourself and the steering wheel. Only when you use the seat belt properly, can it hold you in a position that allows the airbag to achieve its optimum effect. See Sitting in the Correct Position (page 70). The driver and front passenger airbags will deploy during significant frontal collisions or collisions that are up to 30 degrees from the left or the right. The airbags will inflate within a few thousandths of a second and deflate on contact with the occupants, thus cushioning forward body movement. During minor frontal collisions, overturns, rear collisions and side collisions, the driver and front passenger airbags will not deploy. Have repairs to the steering wheel, steering column, seats, airbags and seat belts carried out by properly trained technicians. Keep the areas in front of the airbags free from obstruction. Do not affix anything to or over the airbag covers. Side airbags Do not poke sharp objects into areas where airbags are fitted. This could damage and adversely affect deployment of the airbags. Use seat covers designed for seats with side airbags. Have these fitted by properly trained technicians. Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys. This is normal. E72658 Side airbags are fitted inside the seatback of the front seats. A label indicates that side airbags are fitted to your vehicle. Note: Only wipe airbag covers with a damp cloth. 17 Occupant protection Status after a collision The side airbags will deploy during significant lateral collisions. Only the airbag on the side affected by the collision will deploy. The airbags will inflate within a few thousandths of a second and deflate on contact with the occupants, thus providing protection for the chest and shoulder areas. During minor lateral collisions, overturns, front collisions and rear collisions, the side airbags will not deploy. WARNING Seat belts subjected to strain, as a result of an accident, should be renewed and the anchorages checked by a properly trained technician. FASTENING THE SEAT BELTS Seat belts WARNINGS Wear a seat belt and keep sufficient distance between yourself and the steering wheel. Only when you use the seat belt properly, can it hold you in a position to achieve its optimum effect. See Sitting in the Correct Position (page 70). Never use a seat belt for more than one person. Use the correct buckle for each seat belt. E66541 Do not use a seat belt that is slack or twisted. WARNING Insert the tongue into the buckle until a distinct click is heard, otherwise the seat belt will not be locked correctly. Do not wear thick clothing. The seat belt must fit tightly around your body to achieve its optimum effect. Pull the belt out steadily. It may lock if pulled sharply or if the vehicle is on a slope. Position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips. To release the belt, press the red button on the buckle and let the belt rewind completely and smoothly. The drivers seat belt retractor is fitted with a seat belt pretensioner. Seat belt pretensioners have a slightly lower deployment threshold than the airbags. During significant frontal collisions, it is possible that only the seat belt pretensioners will deploy. 18 Occupant protection Rear seat belts SEAT BELT REMINDER WARNING The occupant protection system will only provide optimum protection when you use the seat belt properly. The seat belt reminder warning lamp illuminates and an audible warning will sound if the driver's seat belt has not been fastened and the vehicle exceeds a relatively low speed. It will also illuminate if the driver's seat belt is unfastened when the vehicle is moving. The audible warning will go off after five minutes but the seat belt reminder warning lamp will remain on until the driver's seat belt is fastened. E75564 WARNING In order to ensure that the centre belt works properly, the rear seatback must be correctly engaged. Deactivating the seat belt reminder Make sure that each seat belt uses the correct buckle. See your dealer. USING SEAT BELTS DURING PREGNANCY SEAT BELT HEIGHT ADJUSTMENT E68587 WARNING Position the seat belt correctly for your safety and that of your unborn child. Do not use only the lap strap or the shoulder strap. E68901 19 Occupant protection Disabling the passenger airbag Position the lap strap comfortably across your hips and low beneath your pregnant abdomen. Position the shoulder strap between your breasts, above and to the side of your pregnant abdomen. DISABLING THE PASSENGER AIRBAG A B E71312 WARNING To use a child restraint in the front, make sure that the key switch is turned to position A. To avoid the risk of death or serious injury, NEVER use a rearward facing child restraint in the front, unless the airbag is OFF. When you switch the ignition on, check that the passenger airbag deactivation warning lamp comes on. See At a Glance (page 7). Enabling the passenger airbag WARNING For the adult restraint system to perform as intended, make sure that the airbag is ON. After removing the child restraint from the front, make sure that you turn the key switch to position B. E71313 The key switch and the airbag deactivation lamp are located in the instrument panel. If the airbag warning lamp in the instrument cluster illuminates intermittently, it means that there is a malfunction. Remove the child restraint from the front. Have the system checked by a suitably trained technician for your own safety. See Warning Lamps and Indicators (page 51). 20 Keys and Remote Controls 2. Turn the ignition to position 0. A tone sounds to indicate that it is now possible to programme the remote controls for ten seconds. 3. Press any button on a new remote control. A tone will sound as confirmation. 4. Repeat this last step for all your remote controls, including your original. Do not remove the key from the ignition when pressing the button on this remote control. 5. Switch the ignition back on (position II) or wait for ten seconds without programming another remote control to end the key programming. Only the remote controls which you have just programmed are now able to lock and unlock the vehicle. GENERAL INFORMATION ON RADIO FREQUENCIES CAUTIONS The radio frequency used by your remote control can also be used by other short distance radio transmissions (e.g. amateur radios, medical equipment, wireless headphones, remote controls and alarm systems). If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key. Check your vehicle is locked before leaving it unattended. This will safeguard against any potential malicious frequency blocking. Note: You could unlock the doors if you press the buttons on the remote control unintentionally. Reprogramming the unlocking function The operating range between your remote control and your vehicle varies depending on the environment. Note: When you press the unlock button either all the doors are unlocked or depending on the locking configuration, specific doors are unlocked. Pressing the unlock button again unlocks all the doors. PROGRAMMING THE REMOTE CONTROL Press and hold the unlock and lock buttons on the remote key simultaneously for at least four seconds with the ignition off. The direction indicators will flash twice to confirm the change. A maximum of four remote controls (including any supplied with your vehicle) can be programmed. The remote controls must remain inside the vehicle during the programming procedure. Fasten the front seat belts and close all doors to ensure that conflicting chimes do not sound during programming. To return to the original unlocking function, repeat the process. CHANGING THE REMOTE CONTROL BATTERY Programming a new remote control 1. Make sure that you dispose of old batteries in an E107998 environmentally friendly way. Seek advice from your local authority regarding recycling. To programme new remote controls turn the ignition key to position II four times within six seconds. 21 Keys and Remote Controls E74386 1. Insert a screwdriver into the recess on the back of the key and remove the key blade. 2. Release the retaining clips with the screwdriver and separate the two halves of the remote control. CAUTION Do not touch the battery contacts or the printed circuit board with the screwdriver. 3. Carefully prise out the battery with the screwdriver. 4. Install a new battery (3V CR 2032) with the + facing upwards. 5. Assemble the two halves of the remote control. 6. Install the key blade. 22 Locks Unlocking the doors with the key LOCKING AND UNLOCKING Note: If single stage unlocking is enabled all doors will be unlocked with one turn of the key or one press of button A on the remote. Central locking Note: You can unlock all the doors and luggage compartment lid with the key from the front doors. This needs to be used if the remote control system is not functioning. If single stage unlocking is disabled turn the key twice to the unlock position. All vehicles Turn the top of the key towards the front of the vehicle twice to unlock all doors. Note: Unlocking the luggage compartment lid with a key will only unlock that door. Transit Connect Note: You can only centrally lock the doors if they are all closed. Turn the top of the key towards the front of the vehicle to unlock the front doors. Double locking Tourneo Connect Turn the top of the key towards the front of the vehicle to unlock the front doors and sliding doors. WARNING Do not activate double locking when persons or animals are inside the vehicle. You will not be able to unlock the doors from the inside if you have double locked them. Locking the doors with the key Turn the top of the key towards the rear of the vehicle to lock all doors. Locking and unlocking the luggage compartment lid Double locking is a theft protection feature that prevents someone from opening the doors from the inside. You can only double lock the doors if they are all closed. Locking and unlocking confirmation You can lock or double lock the whole vehicle or unlock the luggage compartment lid with the key at the luggage compartment lid. When you unlock the doors, the direction indicators will flash once. Double locking the doors with the key On vehicles without double locking, the direction indicators will flash twice when you lock the doors. Turn the key to the unlock position and then the lock position within three seconds to double lock the doors. On vehicles with double locking, the direction indicators will flash twice when you double lock the doors. 23 Locks Locking and unlocking the doors with the remote control Press button B twice within three seconds to activate double locking. One-stage unlocking A B You can programme the locking system so that all doors are unlocked with one key turn in a front door or a press of button A on the remote control. C Type 1 See Personalised Settings (page 58). E87379 A Unlock B Lock C Luggage compartment lid unlock Type 2 See Programming the remote control (page 21). Two-stage unlocking Note: The alarm system is armed when the vehicle is locked with either the key or by pressing button B on the remote control. Two stage unlocking is the default unlock setting if one stage unlocking is not enabled. Note: Depending on the vehicle configuration, the doors unlocked with one turn of the key or press of button A on the remote control may vary. One key turn or a press of button A on the remote control will unlock the first stage. Two key turns or two presses of button A on the remote control will unlock all the doors. Note: Button C will remain functional when the ignition is on if the vehicle is stationary or moving very slowly. One press of button C on the remote control will unlock the luggage compartment lid. Two presses of button C on the remote control will unlock all the doors. Transit Connect Press button A once to unlock the front doors only. Automatic relocking Press button A twice to unlock all doors. Tourneo Connect The doors will relock automatically if you do not open a door within 45 seconds of unlocking the doors with the remote control. The door locks and the alarm will return to their previous state. Press button A once to unlock the front doors and sliding doors. Sliding door memory locking Press button C once to unlock the sliding door and luggage compartment lid. If the vehicle is locked when a sliding door is open, the sliding door will become locked when it is closed. It is not possible to double lock the vehicle with a sliding door open. Press button A twice to unlock all doors. Press button C once to unlock the luggage compartment lid. All vehicles Press button B once to lock all doors. 24 Locks Locking and unlocking the doors from inside Sliding door Front doors A B A B E74704 A Lock all doors B Unlock E74706 Note: Dependent on vehicle lock configuration different doors will open using B. If single stage unlocking is enabled all doors will be unlocked. A Lock B Unlock Opening the doors Sliding door Note: On Tourneo Connect, the right-hand sliding door is inhibited from opening fully when the fuel filler flap is unlocked and open. 25 Locks Right-hand rear door A B 2 1 A B E74705 A Outside B Inside Double rear doors WARNING E74707 Close the rear doors properly to prevent them from opening while you are driving. Driving with the rear doors open is extremely dangerous as exhaust fumes can be drawn into the vehicle’s interior. A Outside B Inside Left-hand rear door 2 E74708 26 1 Locks Opening the doors through 180 and 250 degrees A B E74709 Push the yellow button located on the door. The check arms will automatically re-engage when the doors are closed. E66517 Luggage compartment lid WARNING Close the luggage compartment lid properly to prevent it opening while you are driving. Driving with it open is extremely dangerous as exhaust fumes can be drawn into the vehicle’s interior. Note: To open the luggage compartment lid from inside, you can access the release button through an aperture at the bottom of the luggage compartment lid. 27 A Outside B Inside Engine immobiliser The indicator in the instrument cluster will come on for approximately three seconds and then go out. If the indicator stays on for one minute or flashes for approximately one minute and then repeatedly at irregular intervals, your key has not been recognised. Remove the key and try again. PRINCIPLE OF OPERATION The engine immobiliser is a theft protection system that prevents someone from starting the engine with an incorrectly coded key. If you are unable to start the engine with a correctly coded key, this indicates a malfunction. Have the immobiliser checked immediately. CODED KEYS Note: Do not shield your keys with metal objects. This may prevent the receiver from recognising your key as a valid one. Note: Have all of your remaining keys erased and recoded if you lose a key. Ask your dealer for further information. Have replacement keys recoded together with your existing keys. If you lose a key, you can obtain a replacement from your Ford Dealer. If possible, provide them with the key number from the tag provided with the original keys. You can also obtain additional keys from your Ford Dealer. ARMING THE ENGINE IMMOBILISER The engine immobiliser is armed automatically a short time after you have switched the ignition off. The indicator in the instrument cluster will flash to confirm that the system is operating. DISARMING THE ENGINE IMMOBILISER The engine immobiliser is disarmed automatically when you switch the ignition on with a correctly coded key. 28 Alarm PRINCIPLE OF OPERATION The perimeter alarm is a deterrent against unauthorised access to your vehicle through the doors and the bonnet. It also protects the audio unit. Note: False alarms can also be triggered by the auxiliary heater. See Auxiliary Heater (page 66). If you are using the auxiliary heater, direct the air towards the footwell. Triggering the alarm Once armed, the alarm is triggered in any of the following ways: • If someone opens a door, the luggage compartment or the bonnet without a valid key or remote control. • If the bonnet is opened with a valid key. • If someone removes the audio or navigation system. If the alarm is triggered, the alarm horn will sound for 30 seconds and the hazard warning flasher will flash for five minutes. Any further attempts to perform one of the above will trigger the alarm again. ARMING THE ALARM To arm the alarm, lock the vehicle. See Locks (page 23). DISARMING THE ALARM Disarm and silence the alarm by unlocking either of the front doors or luggage compartment with the key. 29 Steering Wheel ADJUSTING THE STEERING WHEEL WARNING Make sure that you fully engage the locking lever when returning it to its original position. WARNING Never adjust the steering wheel when the vehicle is moving. AUDIO CONTROL Select radio or CD mode on the audio unit. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 70). The following functions can be operated with the remote control: Volume 2 2 1 E95178 E116379 3 Volume up: Press the top button on the back of the remote control. E95179 Volume down: Press the bottom button on the back of the remote control. 30 Steering Wheel Seek Mode E116297 Briefly press the button on the side: • • • In radio mode, this will locate the next pre-set radio station. In CD mode, this will select the next CD if a CD changer is fitted. In all modes to abort a traffic message during broadcasting. Press and hold the button on the side: • E116380 In radio mode to change the waveband. Move the lever up or down: • • In radio mode, this will locate the next radio station up or down the frequency band. In CD mode, it will select the next or previous track. VOICE CONTROL For further information See Voice control (page 151). To select or deselect voice control: 31 Steering Wheel E116297 32 Wipers and Washers AUTOWIPERS WINDSCREEN WIPERS CAUTIONS Do not switch autowipers on in dry weather conditions. The rain sensor is very sensitive and the wipers may operate if dirt, mist or flies hit the windscreen. D C B Replace the wiper blades as soon as they begin to leave bands of water and smears. If you do not replace them, the rain sensor will continue to detect water on the windscreen and the wipers will operate, even though the majority of the windscreen is dry. Fully defrost the windscreen in icy conditions before you switch autowipers on. A E71012 A Single wipe Switch autowipers off before you enter a car wash. B Intermittent wipe or autowipers C Normal wipe D High speed wipe A B Intermittent wipe A B C E71013 C A Low sensitivity B On C High sensitivity E71013 A Long wipe interval B Intermittent wipe C Short wipe interval If you switch autowipers on, the wipers will not cycle until water is detected on the windscreen. The rain sensor will then continuously measure the amount of water on the windscreen and adjust the speed of the wipers automatically. 33 Wipers and Washers Adjust the sensitivity of the rain sensor using the rotary control. With low sensitivity, the wipers will operate when the sensor detects a lot of water on the windscreen. With high sensitivity, the wipers will operate if the sensor detects a small amount of water on the windscreen. REAR WINDOW WIPER AND WASHERS Intermittent wipe WINDSCREEN WASHERS E71017 Pull the lever towards the steering wheel. Reverse gear wipe E71016 While the button at the end of the lever is pressed the washer will work in conjunction with the wipers. The rear wiper will be activated automatically when selecting reverse gear if: • the rear wiper is not already switched on, • the wiper lever is in position A, B, C or D and • the front wiper is operating (when set to position B). After releasing the button, the wipers operate for a short time. The rear wiper will follow the front wiper interval (at intermittent or normal speed). WARNING Do not operate the washer for more than 10 seconds at a time, and never when the reservoir is empty. 34 Wipers and Washers Rear window washer CHECKING THE WIPER BLADES E71018 WARNING Do not operate the washer for more than 10 seconds at a time, and never when the reservoir is empty. E66644 Run the tip of your fingers over the edge of the blade to check for roughness. While the lever is pulled towards the steering wheel the washer will work in conjunction with the wipers. Clean the wiper blade lips with water applied with a soft sponge. Once the wash and wipe cycle is completed, the wipers will pause and then perform one more wipe to clear the windscreen. CHANGING THE WIPER BLADES After releasing the lever, the wipers operate for a short time. 2 1 E93783 35 Wipers and Washers 3 E93784 5 4 E93785 6 E93786 Install in the reverse order. 36 Lighting Main and dipped beam LIGHTING CONTROL Lighting control positions F A B C E71095 Pull the lever fully towards the steering wheel to switch between main and dipped beam. E71094 E A Off D B Side and tail lamps C Headlamps D Front fog lamps E Rear fog lamps F Parking lamps Headlamp flasher Pull the lever slightly towards the steering wheel. Home safe lighting You can switch home safe lighting on up to 10 minutes after you have switched the ignition off. Vehicles without autolamps Parking lamps Switch the headlamps on and then switch them off within two seconds. First, switch off the ignition. Vehicles with autolamps Push the lighting control inwards and turn it to position F. 1. Switch autolamps on and then switch them off within two seconds. 2. Switch autolamps off and then switch them on within two seconds All vehicles The headlamps will go off automatically after 3 minutes with any door open, or 30 seconds after the last door has been closed. 37 Lighting With all doors closed, but within the 30 second delay, opening any door will result in the 3 minute timer starting again. FRONT FOG LAMPS The home safe lights can be cancelled by either turning the headlamp switch ON or by turning the ignition switch ON. AUTOLAMPS WARNING In severe weather conditions, it may be necessary to switch your headlamps on manually. E71096 WARNING Note: If you have switched autolamps on, you can only switch the main beam on when autolamps has switched the headlamps on. Only use the front fog lamps when visibility is considerably restricted by fog, snow or rain. Note: You cannot switch the front fog lamps on if you have switched autolamps on. REAR FOG LAMPS E73840 The headlamps will come on and go off automatically depending on the ambient light. E71097 WARNING Do not use the rear fog lamps when it is raining or snowing and visibility is more than 50 metres. Note: You cannot switch the rear fog lamps on if you have switched autolamps on. 38 Lighting HAZARD WARNING FLASHERS HEADLAMP LEVELLING Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers may flash if you brake heavily. All vehicles E71943 For item location: See At a Glance (page 7). E65990 You can adjust the level of the headlamp beams according to the vehicle load. Recommended headlamp levelling switch positions Note: Higher control positions (+1) may be necessary when towing a trailer. Transit Connect Load Persons Control position Load in luggage compart1 ment 1 1 - 0 2 max. 1 2 When the vehicle is fitted with the attitude or ride height pack, headlamp levelling may need to be adjusted. 2 See Vehicle identification (page 123). 39 Lighting Tourneo Connect Load Persons 1 Control position Load in luggage 1 Front Rear compartment 1-2 - - 2 3-6 2 3-6 max. 1 - max. SWB 5 seats LWB 5 seats LWB 8 seats 0 0 0 1 1 1 1 1.5 1.5 1.5 1 2.5 2 1.5 See Vehicle identification (page 123). INTERIOR LAMPS DIRECTION INDICATORS C A B E72170 E71098 Note: Tap the lever up or down to make the direction indicators flash only three times. A Off B Door contact C On If you set the switch to position B, the courtesy lamp will come on when you unlock or open a door or the tailgate. If you leave a door open with the ignition switch off, the courtesy lamp will go off automatically after some time to prevent the vehicle battery from discharging. To switch it back on, switch on the ignition for a short time. 40 Lighting The courtesy lamp will also come on when you switch off the ignition. It will go off automatically after a short time or when you start or restart the engine. Note: The following instructions describe how to remove the bulbs. Fit replacements in the reverse order unless otherwise stated. Headlamp If you set the switch to position C with the ignition switch off, the courtesy lamp will come on. It will go off automatically after a short time to prevent the vehicle battery from discharging. To switch it back on, switch on the ignition for a short time. Direction indicator 2 Reading lamps E72171 CHANGING A BULB 1 WARNINGS Switch the lights and the ignition off. Let the bulb cool down before removing it. CAUTIONS Do not touch the glass of the bulb. E76059 1. Turn the bulb holder anti-clockwise and remove it. 2. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. Only fit bulbs of the correct specification. See Bulb Specification Chart (page 46). Note: When replacing a bulb, clean the headlamp lens with a damp cloth to avoid any electrostatic charging, which attracts dust to the plastic lens. 41 Lighting Side lamp Headlamp main and dipped beam 1 1 E76060 E76060 Note: When installing the cover, make sure the arrow faces up. Note: When installing the cover, make sure the arrow faces up. 1. 1. Turn the cover anti-clockwise and remove it. Turn the cover anti-clockwise and remove it. 3 2 2 E76062 2. Disconnect the electrical connector. 3. Release the clip and remove the bulb. 3 E76061 2. Remove the bulb and the bulb holder. 42 Lighting Front fog lamps 3. Remove the bulb. Side repeaters 2 1 3 1 2 E76063 1. Carefully remove the side repeater. 2. Hold the bulb holder, turn the housing anti-clockwise and remove it. 3. Remove the bulb. E76064 Note: You cannot separate the fog lamp bulb from the bulb holder. Note: You can access the lamp from behind the front bumper. 1. Disconnect the electrical connector. 2. Turn the bulb holder anti-clockwise and remove it. 43 Lighting Rear lamps 2. Remove the rear lamp and unclip the bulb holder. 3. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. 2 2 Central high mounted brake lamp 1 3 E76065 A 2 1 B C E76067 1. Remove the screws. 2. Remove the lamp. 3. Remove the bulb. D E76066 1. A Tail and brake lamp B Direction indicator C Reversing lamp D Fog lamp Remove the wing nuts. 44 Lighting Number plate lamp Interior lamp Vehicles with double rear doors Front 1 2 E71074 1 1. Remove the lens. 2. Remove the bulb. 2 E76068 Rear Vehicles with a tailgate 2 2 2 1 E76070 1 1. Carefully prise out the lamp. 2. Remove the bulb. 1 Reading lamps E71075 1. Open the lens. 2. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. 2 E76069 45 2 1 Lighting 1. Carefully prise out the lamp. 2. Remove the bulb. BULB SPECIFICATION CHART Lamp Specification Power (watt) Headlamp main and dipped beam H4 55/60 Front fog lamp H11 55 PY21W 21 Front direction indicator W5W 5 Side repeater Side lamp WY5W 5 Brake and tail lamp P21/5W 21/5 W16W 16 Central high mounted brake lamp PY21W LL 21 Rear fog lamp Rear direction indicator P21W 21 Number plate lamp (vehicles with a tailgate) R10W 10 Number plate lamp (vehicles with double rear doors) W5W 5 Reversing lamp P21W 21 Interior lamp Festoon 10 Reading lamp H6W 6 46 Windows and Mirrors Manual folding mirrors POWER WINDOWS Folding WARNING Push the mirror towards the door window glass. Do not operate the electric windows unless they are free from obstruction. Unfolding Note: If you operate the switches often during a short period of time, the system might become inoperable for a certain time to prevent damage due to overheating. Make sure that you fully engage the mirror in its support when returning it to its original position. ELECTRIC EXTERIOR MIRRORS B C A E93505 Switch on the ignition to operate the electric windows. E71280 To open the driver’s window automatically A Left-hand mirror B Off Press the switch to the second action point and release it. Press it again to stop the window. C Right-hand mirror EXTERIOR MIRRORS WARNING Do not overestimate the distance of the objects that you see in the convex mirror. Objects seen in convex mirrors will appear smaller and further away than they actually are. E71281 47 Windows and Mirrors The electric exterior mirrors are fitted with a heating element that will defrost or demist the mirror glass. See Climate Control (page 62). The auto-dimming mirror will adjust automatically when hit by glaring light from behind. It will not work when you have selected reverse gear. REAR QUARTER WINDOWS E66498 Pull the lever outwards to open the window. Press the lever in the middle to engage it in its catch. Pull the lever in the middle to close the window. Push it backwards until it engages in its catch. AUTO-DIMMING MIRROR E71028 48 Instrument Cluster GAUGES Type 1 A C B G F E74268 A Tachometer B Engine coolant temperature gauge C Fuel gauge D Speedometer E Clock set button F Information display G Tripmeter reset button 49 D E Instrument Cluster Type 2 A C B F D E E115885 A Tachometer B Engine coolant temperature gauge C Fuel gauge D Speedometer E Information display F Message indicator CAUTION Engine coolant temperature gauge Do not restart the engine until the cause of overheating has been resolved. All vehicles Shows the temperature of the engine coolant. At normal operating temperature, the needle will remain in the centre section. 50 Instrument Cluster ABS warning lamp If the needle enters the red section, the engine is overheating. Stop the engine, switch the ignition off and determine the cause once the engine has cooled down. If a warning or indicator lamp does not illuminate when the ignition is switched on, this indicates a malfunction. Have the system checked by properly trained technician. Vehicles with an information display In addition, a warning message will appear in the display. Airbag warning lamp Fuel gauge If it illuminates when driving, this indicates a malfunction. Have the system checked by a properly trained technician. The arrow adjacent to the fuel pump symbol tells you on which side of your vehicle the fuel filler cap is located. Brake system warning lamp WARNING LAMPS AND INDICATORS It illuminates when the parking brake is engaged. The following warning lamps and indicators will come on briefly when you switch the ignition on to confirm that the system is operational: • • • • • • • • • • • • WARNING Reduce your speed gradually and stop your vehicle as soon as it is safe to do so. Use your brakes with care. ABS Airbag Brake system Engine Engine immobiliser Ignition Low fuel level Oil pressure Service interval Shift Stability control (ESP) and traction control Water-in-fuel If it illuminates when you are driving, check that the parking brake is not engaged. If the parking brake is not engaged, this indicates a malfunction. Have the system checked by a properly trained technician immediately. Direction indicator Flashes during operation. A sudden increase in the rate of flashing warns of a failed indicator bulb. See Changing a Bulb (page 41). If a warning or indicator lamp does not illuminate when the ignition is switched on, this indicates a malfunction. Have the system checked by a properly trained technician. Door open warning lamp It will illuminate when you switch the ignition on if you have not closed the doors, the bonnet or tailgate properly. 51 Instrument Cluster Headlamp indicator Engine warning lamps It will illuminate when you switch the headlamp dipped beam or the side and tail lamps on. Malfunction indicator lamp Powertrain warning lamp Ignition warning lamp All vehicles If the charging system drive belt on the diesel engines is loose, torn or broken, the servo assistance for the braking system also no longer operates. WARNING If either lamp illuminates when the engine is running, this indicates a fault. The engine will continue to run but it may have limited power. If it flashes when you are driving, reduce the speed of your vehicle immediately. If it continues to flash, avoid heavy acceleration or deceleration. Have the system checked by a properly trained technician immediately. If it illuminates whilst driving, this indicates a malfunction. Switch off all unnecessary electrical equipment. Have the system checked by a properly trained technician immediately. Low fuel level warning lamp WARNING If it illuminates, refuel as soon as possible. Have this checked immediately. The arrow adjacent to the fuel pump symbol tells you on which side of your vehicle the fuel filler cap is located. If both lamps illuminate together, stop your vehicle as soon as it is safe to do so (continued use may cause reduced power and cause the engine to stop). Turn the ignition off and attempt to restart the engine. If the engine restarts have the system checked by a properly trained technician immediately. If the engine does not restart the vehicle must be checked before continuing your journey. Main beam indicator Illuminates when you switch the headlamp main beam on. It will flash when you use the headlamp flasher. Message indicator Front fog lamp indicator It will illuminate when a new message is stored in the information display. See Information Messages (page 59). It will illuminate when you switch the front fog lamps on. Glow plug indicator See Starting a Diesel Engine (page 80). 52 Instrument Cluster Shift indicator Oil pressure warning lamp It will illuminate for a short period of time to inform you that shifting to a higher gear may give better fuel economy and lower CO2 emissions. It will not illuminate during periods of high acceleration, braking or when the clutch pedal is pressed. CAUTION Do not resume your journey if the oil pressure warning lamp comes on despite the oil level being correct. Have the system checked by a properly trained technician immediately. If the lamp stays on after starting or illuminates during a journey, this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level. See Engine Oil Check (page 108). Top up straight away if the level is low. Stability control (ESP) and traction control warning lamp Note: If either the ESP system or traction control system malfunctions, the respective system will switch off automatically. It will flash when either system is operating. If it does not flash or it comes on when you are driving, this indicates a malfunction. Have the system checked by a properly trained technician immediately. Rear fog lamp indicator It will illuminate when you switch the rear fog lamps on. If you switch ESP off, the warning lamp will come on. The lamp will go out when you switch the system back on or when you switch the ignition off. Service interval indicator It will illuminate when a service is due or there is excessive soot or sludge in the oil. Have the engine oil changed as soon as possible. Water-in-fuel indicator Vehicles with a diesel engine Your dealer will switch the service interval indicator lamp off for you after completing the service. It will illuminate if there is excess water in the fuel filter. Have the system checked by a properly trained technician immediately. Seat belt reminder See Seat belt reminder (page 19). AUDIBLE WARNINGS AND INDICATORS Door open A warning tone will sound if the vehicle exceeds a relatively low speed and you have not closed the doors or the bonnet properly. 53 Instrument Cluster Frost WARNING Even if the temperature rises to above +4ºC there is no guarantee that the road is free of hazards caused by inclement weather. A warning chime will sound in the following conditions: • +4ºC or lower: frost warning • 0ºC or lower: danger of icy roads Lights on A warning tone will sound if the driver's door is opened when the lights are on and the ignition is switched off. Low fuel A warning chime will sound at the following ranges: 80 km (50 miles), 40 km (25 miles), 20 km (12 miles), 0 km (0 miles). 54 Information Displays • GENERAL INFORMATION • WARNING Do not operate the information display controls when the vehicle is moving. to scroll through the trip computer displays to scroll through and highlight the options within a menu. Note: The information display will remain on for several minutes after you switch off the ignition. Various systems on your vehicle can be controlled using the multi-function lever on the steering column. Corresponding information is displayed in the information display. E73266 Press the SET/RESET button to: Controls • • • • • enter the main menu from the trip computer displays enter a sub-menu exit a menu choose and confirm a setting reset trip computer function. Note: If the chimes are activated, a short tone will sound each time the button is pressed. E73265 Use the rotary control: 55 Information Displays Menu structure ESP Clock Setting Vehicle Settings Remote unlocking Approach lights Lane change indicators Radio display Hazards on heavy braking Chimes Hill start Select Language Press Set to Exit Menu Exit E116081 56 ENGLISH MLS ENGLISH KM DEUTSCH ITALIANO FRANCAIS ESPAÑOL TÜRKÇE РУССКИЙ NEDERLANDS POLSKI SVENSKA PORTUGUES Information Displays 1. Press the clock set button until the time flashes in the display. 2. Press the clock set button to set the time. TRIP COMPUTER Type 1 information display Type 2 information display A B A C B C D E D E91003 A Distance to empty or clock E B Tripmeter C Odometer D Clock set button A Clock, radio station or CD track E Trip meter reset button B Outside air temperature C Tripmeter D Odometer E Message indicator E115886 Setting the time You can change the settings of various functions through the information display. The information display also provides information messages. See Information Messages (page 59). Odometer Registers the total mileage of the vehicle. Tripmeter E91004 Registers the mileage of individual journeys. Note: You can only set the time through the audio unit on some vehicles. See separate handbook. 57 Information Displays Distance to empty Note: The position of the trip computer display may vary depending on the information shown in the display. Indicates the approximate distance the vehicle will travel on the fuel remaining in the tank. Changes in driving pattern may cause the value to vary. PERSONALISED SETTINGS Average fuel consumption 1. Use the rotary control to enter the main menu. 2. Press the SET/RESET button to choose a sub-menu and adjust the settings. Indicates the average fuel consumption since the function was last reset. Average speed ESP Indicates the average speed calculated since the function was last reset. Outside air temperature Select this option to activate or deactivate ESP. Shows the outside air temperature. 1. Menu 2. Enters the main menu. See General Information (page 55). 3. The trip computer includes the following information displays: 4. 5. 123456 Mls Use the rotary control to enter the main menu. Highlight ESP and press the SET/RESET button. Use the SET/RESET button to highlight the desired setting. Use the rotary control to return to Menu Exit. Press the SET/RESET button to exit the menu. Clock setting 1. Dist to empty 2. Average speed 3. Average fuel 4. Vehicle Settings: Press set to exit 5. E116080 6. Use the rotary control to scroll through the trip computer displays. 58 Use the rotary control to enter the main menu. Highlight Clock setting and press the SET/RESET button. Highlight Clock setting and press the SET/RESET button. The hours start to flash. Use the rotary control to adjust the hours to the desired setting. Press the SET/RESET button to confirm the setting. The minutes start to flash. Proceed in the same way to set the minutes and the date. Information Displays 7. Press the SET/RESET button to confirm the setting. 8. Press the SET/RESET button to exit the menu. INFORMATION MESSAGES Vehicle settings Language settings, chimes, approach lights, lane change indicators, radio display, hazards on heavy braking, remote unlocking, hill start. 1. 2. 3. 4. 5. 6. E73265 Use the rotary control to enter the main menu. Highlight Vehicle Settings and press the SET/RESET button. Highlight the desired menu and press the SET/RESET button. Highlight the desired setting and press the SET/RESET button to confirm the setting. Use the rotary control to return to Vehicle Settings. Press the SET/RESET button twice to exit the menus. E73266 Press the SET/RESET button to acknowledge and remove some messages from the information display. Other messages will be removed automatically after a short time. Certain messages need to be confirmed before you can access the menus. Message indicator The message indicator illuminates to supplement some messages. It will be red or amber depending on the severity of the message and will remain on until the cause of the message has been rectified. Doors open Message Driver door open Warning lamp System Red Locks. Vehicle is moving. Stop the vehicle as soon as safely possible and close. 59 Information Displays Message Warning lamp System Passenger door open Red Locks. Vehicle is moving. Stop the vehicle as soon as safely possible and close. Bonnet open Red Locks. Vehicle is moving. Stop the vehicle as soon as safely possible and close. Sliding doors open Red Locks. Vehicle is moving. Stop the vehicle as soon as safely possible and close. Rear door open Red Locks. Vehicle is moving. Stop the vehicle as soon as safely possible and close. Warning lamp System Hill start assist Message Please use parkbrake red Hill start assist active amber Hill start assist active. See Hill Start Assist (page 89). Hill start assist off amber Hill start assist disabled. See Hill Start Assist (page 89). Hill start assist not available amber Hill start assist not available. See Hill Start Assist (page 89). 60 Apply the parking brake. Information Displays Lighting Message Warning lamp System Left indicator bulb failure amber A left-hand side indicator bulb has failed. See Changing a Bulb (page 41). Right indicator bulb failure amber A right-hand side indicator bulb has failed. See Changing a Bulb (page 41). Auto lamp / wiper failure amber Autolamps or autowipers have malfunctioned. Have the system checked by a properly trained technician as soon as possible. Warning lamp System Maintenance Message High engine temperature Engine malfunction Remote key battery low red Cooling system. red Engine. Stop the vehicle as soon as safely possible and switch off the engine immediately. Have the system checked by a properly trained technician immediately. amber The remote control battery is low. Have this checked as soon as possible. Stability control (ESP) Message ESP malfunction Warning lamp System amber Stability control (ESP). Have your vehicle checked by a properly trained technician. 61 Climate Control The fresh air filter removes most potentially harmful particles such as pollen, industrial fallout and road dust from the air entering the vehicle’s interior. PRINCIPLE OF OPERATION Outside air Keep the air intakes forward of the windscreen free from obstruction (snow, leaves etc.) to allow the climate control system to function effectively. AIR VENTS Recirculated air CAUTION Prolonged use of recirculated air may cause the windows to mist up. If the windows mist up, follow the settings for defrosting and demisting the windscreen. E71942 HEATED WINDOWS AND MIRRORS The air currently in the passenger compartment will be recirculated. Outside air will not enter the vehicle. Heated windows Heating Use the heated windows to defrost or demist the windscreen or rear window. Heating performance depends on the temperature of the engine coolant. Note: The heated windscreen operates only when the engine is running. Air conditioning Heated windscreen Note: The air conditioning operates only when the temperature is above 4°C. Note: If you use the air conditioning, the fuel consumption of your vehicle will be higher. E74670 Heated rear window Air is directed through the evaporator where it is cooled. Humidity is extracted from the air to help keep the windows free of mist. The resulting condensation is directed to the outside of the vehicle and it is therefore normal if you see a small pool of water under your vehicle. E74671 The indicator in the switch will illuminate when the system is on. Press the switch again to switch off. It will switch off automatically after a short time. Fresh air filter CAUTION Switch off the blower when using an automatic car wash. 62 Climate Control Temperature control Heated exterior mirrors Electric exterior mirrors are fitted with a heating element that will defrost or demist the mirror glass. They will switch on automatically when you switch the heated rear window on. MANUAL CLIMATE CONTROL Blower Note: If you switch the blower off, the windscreen may mist up. E74658 A Air distribution control Note: A small amount of air is always directed towards the windscreen. E75470 A Off 63 Climate Control B C Rapid heating of vehicle interior D E74662 Ventilation E74663 E A Set the air distribution control to position A or B. Set the blower to any position. Open the air vents to suit individual requirements. E74660 A Face level B Face level and footwell C Footwell D Footwell and windscreen E Windscreen Defrosting and demisting the windscreen Note: Recirculated air is switched off automatically. Recirculated air E73059 E74664 Press the button to toggle between outside air and recirculated air. If necessary, switch the heated windows on. See Heated Windows and Mirrors (page 62). 64 Climate Control Air conditioning Defrosting and demisting the windscreen Switching the air conditioning on and off Note: For the air conditioning to operate the engine must be running. E74666 Press the A/C switch to turn the air conditioning on and off. The indicator in the switch will come on when the air conditioning is operating. Set the air distribution control to position E and select outside air. When the temperature is above 4 °C, the air conditioning will switch on automatically. Make sure the blower is on. If you turn the blower off, the air conditioning will turn off. When you turn the blower on again, the air conditioning will come on automatically. If you move the air distribution control to a position other than E, the A/C will return to its previous setting. Cooling with outside air You can not switch the air conditioning and recirculated air on and off while the air distribution control is set to position E. If necessary, switch the heated windows on. See Heated Windows and Mirrors (page 62). Reducing interior air humidity E74667 Switch the air conditioning on. Cooling the interior quickly E74669 Set the air distribution control to position D and switch on the air conditioning. E74668 Switch on the air conditioning and recirculated air. 65 Climate Control • AUXILIARY HEATER General information WARNINGS Do not operate the programmable fuel fired heater at filling stations, near sources of combustible vapours or dust or in enclosed spaces. • The programmable fuel fired heater operates independently of the vehicle heater by heating the engine’s coolant circuit. It is fed from the vehicle fuel tank. It may also be used while the vehicle is in motion to help the vehicle heater warm up the interior more quickly. Do not refuel when the programmable fuel fired heater display is on. Note: The programmable fuel fired heater will switch off automatically when the battery voltage is low. It is possible that when the programmable fuel fired heater is activated, exhaust fumes may come from under the sides of the vehicle. This is normal. Note: All symbols on the display will flash if the power to the programmable fuel fired heater has been interrupted. The heater will not operate under these circumstances. Re-set the clock time. Principle of operation Note: The programmable fuel fired heater will shut down in the event of a malfunction. Have the system checked by an expert. Before operation CAUTION Observe the following information: • • • Programmable blower operation begins when the coolant reaches a certain temperature. In this mode, ambient temperature has no effect. In continuous heater operation, the unit senses the ambient temperature. If this is above 5°C (41°F) the programmable fuel fired heater heater will not activate. Turning the blower switch to a position other than position one will reduce battery life or even flatten the battery. Switch the programmable fuel fired heater on for approximately 10 minutes at least once a month, all year round. This prevents the water pump and heater motor from seizing. To avoid corrosion, make sure the coolant in your vehicle contains at least 10 % antifreeze all year round. Make sure the coolant level is between the MAX and MIN marks on the reservoir to prevent air locks. See Engine Coolant Check (page 109). Before activating or programming the heater, prepare the following settings: • Set the vehicle heater temperature control to maximum. • • Turn the blower switch to position one. Switch on the recirculated air before turning the ignition off. Wait at least five seconds for the ventilation system to close the outside air vents. Open all the cabin air vents. • 66 Climate Control Setting the clock time A Note: The heating duration for pre-set times and the timed heating mode can be set between 10 and 120 minutes. B Press and hold button A for more than three seconds, until the time flashes in the display. Wait for five seconds until the heating symbol appears and the heating time flashes. Press buttons B and D to adjust the heating duration. After setting the heating duration, press button A. The display will show the clock time with the colon flashing. D E71347 Switching off the heater Press the heating symbol button. The heater will operate for an additional three minutes, and then stop. The display will then show the clock time. Press and hold button A for more than three seconds, until the time flashes in the display. Within five seconds, press buttons B and D to set the time. To adjust the time rapidly, press and hold the respective button. Timed heating mode Setting the heating duration A C B E71349 E71348 D The heater may be switched on to heat for the pre-set duration at any time. Press button C. The display will light up and show the remaining heating time and the heating symbol. CAUTION The recommended setting is 30 minutes. Longer durations will reduce battery life or even flatten the battery. 67 Climate Control Programming the pre-set heating start times Continuous heater operation B C A E71350 E71351 WARNING B D Press button A repeatedly, until the symbol (1, 2 or 3) for the desired pre-set time is displayed. Press buttons B and D to set the time. To adjust the time rapidly, press and hold the respective button. The heater will continue to operate after the ignition is switched off. Switch the heater off to avoid unnecessary heating. After programming the pre-set start times press button A. The display will show the clock time with the colon flashing. Press and hold button B. Press button C. The heater will now operate until button C is pressed again. The display will light up and show the clock time and the heating symbol. Activating and deactivating pre-set start times Programmable heating mode A The heater will come on automatically at the activated pre-set start time, and will stay on for the programmed duration. The display will light up and show the remaining heating duration and the heating symbol. You can program up to three different pre-set start times. E71352 68 C Climate Control Press button A repeatedly, until the symbol (1, 2 or 3) for the desired pre-set time is displayed. Press button C. The ON symbol will appear in the display. To deactivate a pre-set time, press button C again. 69 Seats • SITTING IN THE CORRECT POSITION • bend your legs slightly so that you can press the pedals fully. position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle. FRONT SEATS WARNING Do not adjust the seats while the vehicle is moving. E68595 WARNINGS Do not adjust the seats when the vehicle is moving. Moving the seats backwards and forwards Only when you use the seat belt properly, can it hold you in a position that allows the airbag to achieve its optimum effect. When you use them properly, the seat, head restraint, seat belt and airbags will provide optimum protection in the event of a collision. We recommend that you: • • • • • 2 2 sit in an upright position with the base of your spine as far back as possible. do not recline the seatback more than 30 degrees. adjust the head restraint so that the top of it is level with the top of your head and as far forwards as possible, remaining comfortable. keep sufficient distance between yourself and the steering wheel. We recommend a minimum of 250 millimetres (10 inches) between your breastbone and the airbag cover. hold the steering wheel with your arms slightly bent. 1 E74816 WARNING Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch. 70 Seats Adjusting the lumbar support E80778 Adjusting the angle of the seatback E74817 Adjusting the height of the seat E74819 E74818 71 Seats Adjusting the armrest Transit Connect 1 E74820 Folding the front passenger seat WARNINGS Make sure that the seats and the seatbacks are secure and fully engaged in their catches. E74821 Do not place objects on the seatback when the vehicle is moving. 2 3 4 E74822 72 Seats 6 5 E74823 1. 2. 3. 4. 5. 6. Pull the release strap and fold the seat cushion forwards. Fold the head restraint forwards. Pull the release lever. Fold the seatback forwards. Pull the release lever. Push the seatback down. E81584 Adjusting the head restraint WARNING HEAD RESTRAINTS Raise rear head restraint when the rear seat is occupied by a passenger or a child restraint. Adjust the head restraint so that the top of it is level with the top of your head. Removing the head restraint Press the locking buttons and remove the head restraint. REAR SEATS WARNINGS Do not use the bench seats as a bed when the vehicle is moving. E75767 Make sure that the seats and the seatbacks are secure and fully engaged in their catches. 73 Seats Third row WARNINGS Make sure the red indicator is not showing when you engage the seat rear legs and the third row seatback catches. 2 Do not place objects on a folded seat. Do not pull on the second row seat when the entire seat is folded forwards. 1 Folding a single seatback forwards Second row E74830 Folding the entire seat forwards Second row 1 2 2 1 4 E74829 3 E74832 74 Seats 5 6 4 4 E74846 5 1. Fully lower the head restraints. 2. Pull the levers on the side of the seatback. 3. Fold the seatback forwards. 4. Pull the locking levers up. 5. Fold the seat forwards. E74833 1. Remove the centre head restraint. 2. Fully lower the outer head restraints. 3. Pull the levers on the side of the seatback. 4. Fold the seatback forwards. 5. Pull the release straps down. 6. Fold the seat forwards. Returning the seat to the upright position WARNING Third row When folding the seatbacks up, make sure that the belts are visible to an occupant and not caught behind the seat. Second row 3 1 2 1 E74845 E74840 75 Seats 1. 2. 3. 4. Pull the locking levers down. Fold the seat down. Raise the seatback. Install the centre head restraint. Third row 2 1 E75768 E74849 The seat heating will operate only when the ignition is switched on. 1. Push the release levers down. 2. Fold the seat down. 3. Raise the seatback. The maximum temperature is reached after five or six minutes. It is regulated thermostatically. The seat heating will remain on until either the heated seat switch or the ignition is turned off. HEATED SEATS CAUTION Operating this function with the engine off will drain the battery. 76 Convenience features When connecting appliances, use only specified connectors from the Ford Accessory range or connectors for use with SAE standard sockets. INSTRUMENT LIGHTING DIMMER AUXILIARY POWER POINTS CAUTION If you use the socket when the engine is not running, the battery may discharge. Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 10 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets. E70454 CIGAR LIGHTER E78055 WARNING E116341 Never hold the lighter in as this will result in damage. Always remove the lighter as a precaution when children are left alone in the vehicle. To use the lighter, press it in and wait until it pops out automatically. The lighter will also operate when the ignition is switched off. Other appliances can be connected to the cigar lighter power point. E74677 77 Convenience features CUP HOLDERS WARNING Do not place hot drinks in the cup holders when the vehicle is moving. Seat back trays WARNING Do not use the trays when the vehicle is moving. Make sure that you secure the trays in the lowered position before setting off. E74681 Seat storage 2 E74685 E72630 1 MAP POCKETS STORAGE COMPARTMENTS Overhead storage compartment WARNING Do not place heavy objects in the overhead storage compartment. E74686 78 Convenience features E80718 AUXILIARY INPUT (AUX IN) SOCKET E115675 See separate audio instructions. FLOOR MATS WARNING When using the floor mats, always make sure the floor mat is properly secured using the appropriate fixings and positioned so that it does not interfere with the operation of the pedals. 79 Starting and Stopping the Engine II The ignition is switched on. All electrical circuits are operational. Warning lamps and indicators illuminate. This is the key position when driving. You must also select it when being towed. GENERAL INFORMATION General points on starting If the battery has been disconnected the vehicle may exhibit some unusual driving characteristics for approx. 8 kilometres (5 miles) after reconnecting the battery. III The starter motor is activated. Release the key as soon as the engine starts. This is because the engine management system must realign itself with the engine. Any unusual driving characteristics during this period may be disregarded. STARTING A DIESEL ENGINE Starting the engine by towing or pushing Note: When the temperature is below -15ºC (5ºF), you may need to crank the engine for up to 25 seconds. If you consistently operate the vehicle in such temperatures, we recommend that you have an engine block heater fitted. Cold or hot engine WARNING To prevent damage you must not push or tow start your vehicle. Use booster cables and a booster battery. See Jump-Starting the Vehicle (page 114). Note: Continue cranking the engine until it starts. Note: You can only operate the starter for a maximum of 30 seconds at a time. IGNITION SWITCH Switch the ignition on and wait until the glow plug indicator goes off. WARNING Note: Do not touch the accelerator pedal. Never return the key to position 0 or I when the vehicle is in motion. 1. Fully depress the clutch pedal. 2. Start the engine. SWITCHING OFF THE ENGINE Vehicles with a turbocharger CAUTION Do not switch the engine off when it is running at high speed. If you do, the turbocharger will continue running after the engine oil pressure has dropped to zero. This will lead to premature turbocharger bearing wear. E72128 0 The ignition is off. I The ignition and all main electrical circuits are disabled. Note: Do not leave the ignition key in this position for too long to avoid discharging the battery. 80 Starting and Stopping the Engine Release the accelerator pedal. Wait until the engine has reached idle speed and then switch it off. • • DIESEL PARTICULATE FILTER The DPF forms part of the emissions reduction systems fitted to your vehicle. It filters harmful diesel particulates (soot) from the exhaust gas. • • Regeneration WARNING Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The DPF regeneration process creates very high exhaust gas temperatures and the exhaust will radiate a considerable amount of heat during and after DPF regeneration, and after you have switched the engine off. This is a potential fire hazard. CAUTION Avoid running out of fuel. Note: After you have switched your engine off the fans may continue to run for a short period of time. Unlike a normal filter which requires periodic replacement, the DPF has been designed to regenerate, or clean itself to maintain operating efficiency. The regeneration process takes place automatically. However, some driving conditions mean that you may need to support the regeneration process. If you drive only short distances or your journeys contain frequent stopping and starting, where there is increased acceleration and deceleration, occasional trips with the following conditions will assist the regeneration process: 81 Drive your vehicle at a constant speed, preferably on a main road or motorway, for up to 20 minutes. Avoid prolonged idling and always observe speed limits and road conditions. Do not switch off the ignition. Use a lower gear than normal to maintain a higher engine speed during this journey, where appropriate. Fuel and Refuelling Long-term storage SAFETY PRECAUTIONS Most diesel fuels contain bio-diesel, it is recommended to fill the tank with purely mineral diesel (where available) or add an anti-oxidant prior to long-term storage of your vehicle exceeding two months. Your dealer can help you with a suitable anti-oxidant. WARNINGS Stop refuelling after the fuel nozzle stops the second time. Additional fuel will fill the expansion space in the fuel tank which could lead to fuel overflowing. Fuel spillage could be hazardous to other road users. Do not use any kind of flames or heat near the fuel system. The fuel system is under pressure. There is a risk of injury if the fuel system is leaking. CATALYTIC CONVERTER WARNING Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The exhaust will radiate a considerable amount of heat during use, and after you have switched the engine off. This is a potential fire hazard. FUEL QUALITY - DIESEL WARNING Do not mix diesel with oil, petrol or other liquids. This could cause a chemical reaction. Driving with a catalytic converter CAUTIONS Do not add kerosene, paraffin or petrol to diesel. This could cause damage to the fuel system. CAUTIONS Avoid running out of fuel. Do not crank the engine for long periods. Use diesel that meets the specification defined by EN 590, or the relevant national specification. Do not run the engine when a spark plug lead is disconnected. Note: We recommend that you use only high quality fuel. Do not push-start or tow-start your vehicle. Use booster cables. See Jump-Starting the Vehicle (page Note: The use of additives or other engine treatments not approved by Ford is not recommended. 114). Do not switch the ignition off when driving. Note: We do not recommend the prolonged use of additives intended to prevent fuel waxing. 82 Fuel and Refuelling FUEL FILLER FLAP Tourneo Connect All vehicles Note: The sliding door is inhibited from opening fully when the fuel filler flap is unlocked and open. WARNINGS Take care when refuelling to avoid spilling any residual fuel from the fuel pipe nozzle. REFUELLING CAUTION We recommend that you wait at least 10 seconds before removing the fuel pipe nozzle to allow any residual fuel to drain into the fuel tank. Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immediately. Note: When you remove the filler cap, a hissing noise may be heard. This is normal and should be disregarded. FUEL CONSUMPTION The CO2 and fuel consumption figures are derived from laboratory tests according to EEC Directive 80/1268/EEC and subsequent amendments and are carried out by all vehicle manufacturers. A They are intended as a comparison between makes and models of vehicles. They are not intended to represent the real world fuel consumption you may get from your vehicle. Real world fuel consumption is governed by many factors including; driving style, high speed driving, stop/start driving, air conditioning usage, the accessories fitted and towing etc. B E75775 A Open B Close Your Ford dealer can give you advice on improving your fuel consumption. TECHNICAL SPECIFICATIONS 83 Fuel and Refuelling Tourneo and Kombi Connect Fuel Consumption Figures Urban Extra-Urban Combined CO2 Emissions l/100 km (mpg) l/100 km (mpg) l/100 km (mpg) g/km 1.8 l Duratorq-TDCi Turbo diesel (75 PS), Stage IV, Axle ratio: 4.06 7.8 (36.2) 5.5 (51.4) 6.3 (44.8) 167 1.8 l Duratorq-TDCi Turbo diesel (90 PS), Stage IV, Axle ratio: 4.06 7.9 (35.8) 5.5 (51.4) 6.4 (44.1) 168 1.8 l Duratorq-TDCi Turbo diesel (110 PS), Stage IV, Axle ratio: 3.80 7.6 (37.2) 5.2 (54.3) 6.0 (47.1) 159 Variant 84 Transmission MANUAL TRANSMISSION CAUTION Do not engage reverse gear when the vehicle is moving. This can cause damage to the transmission. Note: Fully depress the clutch pedal and wait for three seconds before you select first gear. Selecting reverse gear E72455 85 Brakes PRINCIPLE OF OPERATION PARKING BRAKE Disc brakes Applying the parking brake Wet brake discs result in reduced braking efficiency. Dab the brake pedal when driving from a car wash to remove the film of water. ABS WARNING E66567 The ABS does not relieve you of your responsibility to drive with due care and attention. WARNING Make sure that the parking brake is applied before you release the lever. The ABS helps you to maintain full steering and directional stability when you brake heavily in an emergency, by preventing the road wheels from locking. Note: Do not press the release button when you apply the parking brake. 1. Press the brake pedal firmly. 2. Pull the parking brake lever upwards to its fullest extent. HINTS ON DRIVING WITH ANTI-LOCK BRAKES Parking on a hill When the ABS is operating, the brake pedal will pulse. This is normal. Maintain pressure on the brake pedal. If you have to park facing uphill, select first gear and turn the front wheels away from the kerb. If you have to park facing downhill, select reverse gear and turn the front wheels towards the kerb. The ABS will not eliminate the dangers inherent when: • you drive too close to the vehicle in front of you. • the vehicle is aquaplaning. • you take corners too fast. • the road surface is poor. Releasing the parking brake 1. Press the brake pedal firmly. 2. Pull the parking brake lever upwards slightly, press the release button and push the lever downwards. 86 Stability Control PRINCIPLE OF OPERATION Stability control (ESP) warning lamp Electronic stability programme (ESP) While driving, it flashes during activation of the system. See Warning Lamps and Indicators (page 51). WARNING Emergency brake assist The system does not relieve you of your responsibility to drive with due care and attention. WARNING The system does not relieve you of your responsibility to drive with due care and attention. The system will detect when you brake heavily by measuring the rate at which you press the brake pedal. It will provide maximum braking efficiency as long as you press the pedal. The system can reduce stopping distances in critical situations. B B USING STABILITY CONTROL B Note: The system will be switched on automatically every time you switch the ignition on. A A B A To turn the system off and on. See Personalised Settings (page 58). E72903 A Without ESP B With ESP The system supports stability when the vehicle starts to slide away from your intended path. This is performed by braking individual wheels and reducing engine torque as needed. The system also provides an enhanced traction control function by reducing engine torque if the wheels spin when you accelerate. This improves your ability to pull away on slippery roads or loose surfaces, and improves comfort by limiting wheel spin in hairpin bends. 87 Traction Control PRINCIPLE OF OPERATION The traction control system improves traction when one wheel starts to spin at vehicle speeds up to 40 km/h (25 mph). If a wheel starts to spin, the traction control system varies the pressure to the brake of that wheel until is stops spinning. USING TRACTION CONTROL The traction control system is operational when you switch the ignition on. The traction control indicator will flash when the system is operating. Slowly accelerate until the spinning wheel regains its traction. The traction control system will stop working temporarily if used excessively within a short period of time. This is normal and has no effect on the brake system. 88 Hill Start Assist PRINCIPLE OF OPERATION You can activate the system only if the following conditions have been met: The system makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. • • • When the system is active, the vehicle will remain stationary on the slope for a short time after you release the brake pedal. During this time, you have time to move your foot from the brake to the accelerator pedal and pull away. The brakes are released automatically once the engine has developed sufficient drive to prevent the vehicle from rolling down the slope. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space. The engine is running. The parking brake is fully disengaged. No failure mode is present. To activate the system: Make sure the system is enabled via the trip control menu. See Information Displays (page 55). 1. Press the brake and clutch pedals to bring the vehicle to a complete standstill. Keep the brake and clutch pedals depressed. 2. If the sensors detect that the vehicle is on a slope the system will be activated automatically and the green lamp will illuminate in the instrument cluster. 3. When you remove your foot from the brake pedal, the vehicle will remain on the slope without rolling away for approximately two to three seconds. This hold time will automatically be extended if you are in the process of driving off. 4. Drive off in the normal manner. The brakes will be released automatically. WARNING The system does not replace the parking brake. When you leave the vehicle, always apply the parking brake and select first or reverse gear. USING HILL START ASSIST The system is activated automatically when the vehicle is stopped on a slope greater than 3%. The system operates with the vehicle facing downhill if reverse gear is selected and with the vehicle facing uphill if any forward gear is selected. WARNING If the engine is revved excessively, or if a malfunction is detected when the system is active, the system will be deactivated and the green lamp will go out. Activating the system WARNINGS You must remain in the vehicle once you have activated the system. Deactivating the system To deactivate the system, perform one of the following: The system is active only if the green lamp illuminates in the instrument cluster. During all times you are responsible for controlling the vehicle, supervising the system and intervening, if required. • • • 89 Apply the parking brake. Drive off uphill without re-applying the brake. Wait for two to three seconds until the system deactivates automatically. Hill Start Assist • • • If the system is active in a forward gear, select reverse gear. If the system is active in neutral, release the clutch pedal. If the system is active in reverse gear, select neutral. The green lamp will go out. Disabling the system See Information Displays (page 55). 90 Parking Aids Note: The parking aid may emit false tones if it detects a signal using the same frequency as the sensors or if the vehicle is fully laden. PRINCIPLE OF OPERATION WARNING The parking aid does not relieve you of your responsibility to drive with due care and attention. Note: The outer sensors may detect the side walls of a garage. If the distance between the outer sensor and the side wall remains constant for three seconds, the tone will switch off. As you continue, the inner sensors will detect rearward objects. CAUTIONS Vehicles fitted with a trailer tow module not approved by us may not correctly detect obstacles. USING THE PARKING AID The sensors may not detect objects in heavy rain or other conditions that cause disruptive reflections. WARNING The parking aid does not relieve you of your responsibility to drive with due care and attention. The sensors may not detect objects with surfaces that absorb ultrasonic waves. The parking aid does not detect obstacles moving away from the vehicle. They will only be detected shortly after they start to move towards the vehicle again. Take particular care when reversing with a tow ball arm or rear fitted accessories e.g. a bicycle carrier, as the rear parking aid will only indicate the distance from the bumper to the obstacle. E77927 The parking aid is automatically activated when you select reverse gear with the ignition switched on. If you use a high pressure spray to wash your vehicle, only spray the sensors briefly from a distance not less than 20 centimetres (8 inches). You will hear an intermittent tone at a distance of approximately 150 centimetres (59 inches) between the obstacle and rear bumper and approximately 50 centimetres (20 inches) to the side. Decreasing the distance accelerates the intermittent tone. A continuous tone will start at a distance of less than 30 centimetres (11 inches) to the rear bumper. Note: On vehicles fitted with a tow ball arm, the parking aid is deactivated automatically when any trailer lamps (or lighting boards) are connected to the 13-pin socket via a trailer tow module we have approved. Note: If a high pitch tone is heard for three seconds, this indicates a malfunction. The system will be disabled. Have the system checked by a properly trained technician. Note: Keep the sensors free from dirt, ice and snow. Do not clean with sharp objects. 91 Load Carrying GENERAL INFORMATION CAUTION Do not exceed the maximum permissible roof load of 100 kilogrammes (220 pounds) (including the roof rack). WARNINGS Use load securing straps to an approved standard, e.g. DIN. Make sure that you secure all loose items properly. 1 Place luggage and other loads as low and as far forward as possible within the luggage or loadspace. Do not drive with the tailgate or rear door open. Exhaust fumes may enter the vehicle. Do not exceed the maximum front and rear axle loads for your vehicle. See Vehicle identification (page 1 E75777 123). 1 CAUTIONS Do not allow items to contact the rear windows. Attachment points Check the security of the roof rack and tighten its fittings as follows: • before starting • after driving 50 kilometres (30 miles) • at 1 000 kilometres (600 miles) intervals. Do not use any abrasive materials to clean the interior of the rear windows. Do not install stickers or labels to the interior of the rear windows. CARGO NETS ROOF RACKS AND LOAD CARRIERS CAUTIONS Do not exceed the maximum permissible cargo net load of 9.5 kilogrammes. Roof rack WARNINGS If you use a roof rack, the fuel consumption of your vehicle will be higher and you may experience different driving characteristics. Make sure that the telescopic bars are securely positioned in the trim panels. Read and follow the manufacturer’s instructions when you are fitting a roof rack. 92 Load Carrying E81954 The 3 telescopic bars can be moved to allow up to 5 cargo net positions. 93 Towing TOWING A TRAILER WARNING Do not exceed the maximum gross train weight stated on the vehicle identification plate. See Vehicle identification (page 123). CAUTION Do not exceed the maximum permissible nose weight, i.e. vertical weight on the tow ball, of 75 kilogrammes (165 pounds). Note: Not all vehicles are suitable or approved to have tow bars fitted. Check with your dealer first. Place loads as low and central to the axle(s) of the trailer as possible. If you are towing with an unladen vehicle, the load in the trailer should be placed toward the nose, within the maximum nose load, as this gives the best stability. The stability of the vehicle to trailer combination is very much dependant on the quality of the trailer. In high altitude regions above 1 000 metres (3 281 feet), the stipulated maximum permitted gross train weight must be reduced by 10% for every additional 1 000 metres (3 281 feet). Steep gradients WARNING The overrun brake on a trailer is not controlled by ABS. Change down a gear before you reach a steep downhill gradient. 94 Driving Hints RUNNING-IN Tyres WARNING New tyres need to be run-in for approximately 500 kilometres (300 miles). During this time, you may experience different driving characteristics. Brakes and clutch WARNING Avoid heavy use of the brakes and clutch if possible for the first 150 kilometres (100 miles) in town and for the first 1500 kilometres (1000 miles) on motorways. Engine CAUTION Avoid driving too fast during the first 1500 kilometres (1000 miles). Vary your speed frequently and change up through the gears early. Do not labour the engine. COLD WEATHER PRECAUTIONS The functional operation of some components and systems can be affected at temperatures below -30°C (-22°F). 95 Roadside Emergencies FIRST AID KIT Space is provided under the driver's seat. WARNING TRIANGLE Space is provided in the left-hand side wall of the load area. 96 Fuses Central fuse box FUSE BOX LOCATIONS Left-hand drive E75782 A B A Engine compartment fuse box B Central fuse box E75783 Engine compartment fuse box 1 2 E75784 E75785 Right-hand drive WARNING Have MAXI fuses (Fuses 1–9 in the auxiliary fuse box) replaced by a properly trained technician. To remove the lid, release the clip and the hinge on the sides and lift the lid off. When replacing the lid, press down on both sides of the hinge (positions 1 and 2) to ensure it is closed properly. E75786 97 Fuses 1. Press the sides inwards and allow the glove box to pivot downwards. CAUTION Fit a replacement fuse with the same rating as the one you have removed. Note: You can identify a blown fuse by a break in the filament. B Note: All fuses, except high current fuses, are a push fit. Note: A fuse puller is located in the engine compartment fuse box. FUSE LABELS A The fuse chart label located on the rear side of the panel trim will help you identify the fuses. Depending on the vehicle variant the necessary fuses and relays may vary. E75787 A Fuse chart label B Fuses The fuse chart label shows rectangles representing a fuse or relay. The following information is shown in the rectangles: 1 CHANGING A FUSE WARNINGS Do not modify the electrical system of your vehicle in any way. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by a properly trained technician. 2 3 E75788 Switch the ignition and all electrical equipment off before touching or attempting to change a fuse. 98 1 Number of the fuse 2 Symbol of the function 3 Ampere rating of the fuse Fuses FUSE SPECIFICATION CHART Engine compartment fuse box Fuse Ampere rating Circuits protected 1 40 Central fuse box 2 30 Double cooling fan - secondary fuse 3 30 Central fuse box 4 60 Heated windscreen 5 40 Single cooling fan - primary fuse 5_A 50 Double cooling fan - primary fuse 6 60 Glow plugs 7 40 Central fuse box 8 20 Ignition switch 9 20 Engine control module 10 10 Battery voltage sense, data link connector 11 20 Fuel fired heater 12 20 Starter solenoid 13 30 ABS pump 14 10 PCV Valve, VCV Valve 15 10 Main beam left-hand side 16 10 Dipped beam left-hand side 17 10 Dipped beam right-hand side 18 10 PCM Power, Vehicle speed sensor 19 20 Daytime running lamps (side lights) 20 1 PCM 21 20 Vaporizer pump 22 20 Daytime running lamps (dipped beams) 23 20 ABS valves 99 Fuses Fuse Ampere rating Circuits protected 24 10 Glow plug monitoring (diesel engines) 25 10 Main beam right-hand side 26 10 Air conditioning clutch solenoid 27 10 Sensors, Actuators, Relay coils 28 20 Foglamps 29 20 Dipped beam (via main beam relay) 64 30 Heater blower motor 65 7.5 Heated windscreen Central fuse box Fuse Ampere rating Circuits protected 130 15 GEM flasher power 131 5 Power mirror 132 10 Light switch (30), GEM VBAT Ext. lighting 133 - Not used 134 - Not used 135 10 Light switch, daytime running lamps 136 15 Horn 137 7.5 Radio, instrument cluster 138 - Not used 139 - Not used 140 - Not used 141 10 Back up lamps, heated front washer jets 142 15 Stop lamps 143 20 Cigar lighter, Auxiliary power point front 100 Fuses Fuse Ampere rating Circuits protected 144 - Not used 145 - Not used 146 20 Front wiper motor 147 10 Heated front seats 148 7.5 GEM VBAT, Recirc / ICL (30-) 149 - Not used 150 - Not used 151 15 Radio (memory and power), BTVC module 152 7.5 A/C, parking aid 153 7.5 Interior lamps and battery saver 154 - Not used 155 - Not used 156 7.5 Side lamps right-hand side 157 7.5 Number plate lamp 158 7.5 Light switch, Rain sensor 159 - Not used 160 - Not used 161 7.5 ABS, ESP, steering angle sensor 162 7.5 Airbag module, PADI indicator 163 20 GEM VBATT locking 164 - Not used 165 - Not used 166 25 Power windows front 167 7.5 Heated mirrors, heated rear window 168 10 Daytime running lamps, parking lamps, number plate lamp 169 20 Second power point 101 Fuses Fuse Ampere rating Circuits protected 170 - Not used 171 - Not used 172 - Not used Not used 173 - 174 20 Rear power point, Transco hand wash 175 7.5 Side lamps left-hand side 176 - Not used 177 - Not used 178 25 Heated rear window 179 7.5 Cluster, PATS, accelerator pedal 180 20 Wiper front and rear 181 - Not used 182 - Not used 102 Vehicle recovery Rear towing eye TOWING POINTS CAUTION The screw-in towing eye has a left-hand thread. Turn it anti-clockwise to install it. Make sure that the towing eye is fully tightened. The towing eye must always be carried in the vehicle. Insert your finger into the hole on the underside of the cover and prise off the cover. Install the towing eye. Front towing eye E93106 Transit Connect Your towing eye is located in the bag behind the driver’s seat. Tourneo Connect Your towing eye is located in the left-hand sidewall of the load area. TOWING THE VEHICLE ON FOUR WHEELS WARNINGS Switch the ignition on when your vehicle is being towed. The steering lock will engage and the direction indicators and brake lamps will not work if you do not. E76186 The brake servo and the power steering pump do not operate unless the engine is running. Press the brake pedal harder and allow for increased stopping distances and heavier steering. 103 Vehicle recovery CAUTIONS Too much tension in the tow rope could cause damage to your vehicle or the vehicle that is towing. Do not use a rigid tow bar on the front towing eye. Drive off slowly and smoothly without jerking the vehicle that is towing. 104 Maintenance Check when refuelling GENERAL INFORMATION • Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford Authorised Repairers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialised tools developed specifically for servicing your vehicle. • • • • In addition to regular servicing, we recommend that you carry out the following additional checks. Engine oil level. See Engine Oil Check (page 108). Brake fluid level. See Brake and Clutch Fluid Check (page 109). Washer fluid level. See Washer Fluid Check (page 110). Tyre pressures (when cold). See Technical Specifications (page 120). Tyre condition. See Tyre Care (page 119). Monthly checks • WARNINGS Switch the ignition off before touching or attempting adjustment of any kind. • • • • • • Do not touch the electronic ignition system parts after you have switched the ignition on or when the engine is running. The system operates at high voltage. Keep your hands and clothing clear of the engine cooling fan. Under certain conditions, the fan may continue to run for several minutes after you have switched the engine off. Engine coolant level (engine cold). See Engine Coolant Check (page 109). Pipes, hoses and reservoirs for leaks. Power steering fluid level. See Power Steering Fluid Check (page 110). Air conditioning operation. Parking brake operation. Horn operation. Tightness of wheel nuts. See Technical Specifications (page 120). OPENING AND CLOSING THE BONNET Opening the bonnet CAUTION WARNING When carrying out maintenance checks, make sure that filler caps are fitted securely. To prevent damage to, or loss of the key, remove the key immediately after opening and swivel the Ford badge back. Daily checks • • • Exterior lamps. Interior lamps. Warning lamps and indicators. 105 Maintenance 1 5 4 E78141 2 3 E78142 E78143 Closing the bonnet Note: Make sure that the bonnet is closed properly. Lower the bonnet and allow it to drop from under its own weight for the last 20 – 30 centimetres (8 - 12 inches). 106 Maintenance UNDER BONNET OVERVIEW - 1.8L DURATORQ-TDCI (LYNX) DIESEL/1.8L DURATORQ-TDDI (LYNX) DIESEL A B C D E F I H G E75516 1 A Power steering fluid reservoir : See Power Steering Fluid Check (page 110). B Engine oil filler cap : See Engine Oil Check (page 108). C Brake and clutch fluid reservoir : See Brake and Clutch Fluid Check (page 109). D Engine compartment fuse box: See Fuses (page 97). E Air cleaner. F Washer fluid reservoir : See Washer Fluid Check (page 110). G Battery: See Vehicle battery (page 114). 1 1 1 107 Maintenance 1 H Engine oil dipstick : See Engine Oil Check (page 108). I Engine coolant reservoir : See Engine Coolant Check (page 109). 1 1 The filler caps and the engine oil dipstick are coloured for easy identification. Checking the oil level ENGINE OIL DIPSTICK - 1.8L DURATORQ-TDCI (LYNX) DIESEL/1.8L DURATORQ-TDDI (LYNX) DIESEL CAUTION Make sure that the level is between the MIN and the MAX marks. Note: Check the level before starting the engine. Note: Make sure that your vehicle is on level ground. B Note: Oil expands when it is hot. The level may therefore extend a few millimetres beyond the MAX mark. A Remove the dipstick and wipe it with a clean, lint free cloth. Replace the dipstick and remove it again to check the oil level. If the level is at the MIN mark, top up immediately. Topping up E95527 A MIN B MAX WARNINGS Only top up when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down. ENGINE OIL CHECK Do not remove the filler cap when the engine is running. CAUTION Remove the filler cap. Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine. CAUTION Do not top up further than the MAX mark. Note: The oil consumption of new engines reaches its normal level after approximately 5000 kilometres (3000 miles). Top up with fluid that meets the Ford specification. See Technical Specifications (page 110). 108 Maintenance Replace the filler cap. Turn it until you feel a strong resistance. CAUTIONS Prolonged use of incorrect dilution of the coolant can cause engine damage from corrosion, overheating or freezing. ENGINE COOLANT CHECK Checking the coolant level Unscrew the cap slowly. Any pressure will escape slowly as you unscrew the cap. WARNING Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. CAUTION Do not top up further than the MAX mark. Top up with a 50/50 mixture of coolant and water using fluid that meets the Ford specification. See Technical Specifications (page 110). CAUTION Make sure that the level is between the MIN and the MAX marks. Note: Coolant expands when it is hot. The level may therefore extend beyond the MAX mark. BRAKE AND CLUTCH FLUID CHECK If the level is at the MIN mark, top up immediately. WARNINGS Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. Topping up WARNINGS Only top up when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down. If the level is at the MIN mark, have the system checked by a properly trained technician as soon as possible. Do not remove the filler cap when the engine is running. Do not remove the filler cap when the engine is hot. Wait for the engine to cool down. Note: Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. Undiluted coolant is flammable and may ignite if spilt on a hot exhaust. Note: The brake and the clutch systems are supplied from the same reservoir. Top up with fluid that meets the Ford specification. See Technical Specifications (page 110). CAUTIONS In an emergency, you can add just water to the cooling system to reach a vehicle service station. Have the system checked by a properly trained technician as soon as possible. 109 Maintenance POWER STEERING FLUID CHECK CAUTION Do not top up further than the MAX mark. WARNING Top up with fluid that meets the Ford specification. See Technical Specifications (page 110). Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. WASHER FLUID CHECK CAUTION Note: The front and rear washer systems are supplied from the same reservoir. Make sure that the level is between the MIN and the MAX marks. Topping up When topping up, use a mixture of washer fluid and water to help prevent freezing in cold weather and improve the cleaning capability. We recommend that you use only high quality washer fluid. Remove the filler cap. For information on fluid dilution, refer to the product instructions. If the level is at the MIN mark, top up immediately. TECHNICAL SPECIFICATIONS Vehicle fluids Item Specification Recommended fluid * Engine oil WSS-M2C913-C Castrol Engine Oil Power assisted steering WSA-M2C-195-A Ford or Motorcraft Power Steering Fluid Coolant WSS-M97B44-D Motorcraft SuperPlus Antifreeze Brake fluid WSS-M6C57-A2 Ford or Motorcraft Super DOT 4 Brake Fluid * Providing it meets the specification defined by WSS-M2C913-C, you can also use Ford Engine Oil or an alternative engine oil. Topping up the oil: If you are unable to find an oil that meets the specification defined by WSS-M2C913-C, you must use SAE 5W-30 (preferred), SAE 5W-40 or SAE 10W-40 that meets the specification defined by either ACEA A5/B5 (preferred) or ACEA A3/B3. Using these oils can result in longer engine cranking periods, reduced engine performance, reduced fuel economy and increased emission levels. Castrol engine oil recommended. 110 Maintenance E115472 Capacities Variant Item Capacity in Litres (gallons) All Power assisted steering fluid All Windscreen washer system 4.3 (1.0) All Fuel tank 60 (13.2) 1.8 l Duratorq-TDdi/ Duratorq-TDCi Cooling system incl. heating 7.0 (1.5) 1.8 l Duratorq-TDdi/ Duratorq-TDCi Engine oil - with filter 5.6 (1.2) 1.8 l Duratorq-TDdi/ Duratorq-TDCi Engine oil - without filter 5.0 (1.1) 111 MAX-mark Vehicle care Cleaning the chrome trim CLEANING THE EXTERIOR CAUTION WARNING Do not use abrasives or chemical solvents. Use soapy water. If you use a car wash with a waxing cycle, make sure that you remove the wax from the windscreen. Body paintwork preservation CAUTIONS Prior to using a car wash facility check the suitability of it for your vehicle. CAUTIONS Do not polish your vehicle in strong sunshine. Some car wash installations use water at high pressure. This could damage certain parts of your vehicle. Do not allow polish to touch plastic surfaces. It could be difficult to remove. Remove the aerial before using an automatic car wash. Do not apply polish to the windscreen or rear window. This could cause the wipers to become noisy and they may not clear the window properly. Switch the heater blower off to prevent contamination of the fresh air filter. We recommend that you wax the paintwork once or twice a year. We recommend that you wash your vehicle with a sponge and lukewarm water containing a car shampoo. CLEANING THE INTERIOR Cleaning the headlamps Seat belts CAUTIONS Do not scrape the headlamp lenses or use abrasives, alcoholic solvents or chemical solvents to clean them. WARNINGS Do not use abrasives, or chemical solvents to clean them. Do not wipe the headlamps when they are dry. Do not allow moisture to penetrate the seat belt retractor mechanism. Clean the seat belts with interior cleaner or water applied with a soft sponge. Let the seat belts dry naturally, away from artificial heat. Cleaning the rear window CAUTION Do not scrape the inside of the rear window or use abrasives or chemical solvents to clean it. Use a clean, lint free cloth or a damp chamois leather to clean the inside of the rear window. 112 Vehicle care Instrument cluster screens, LCD screens, radio screens WARNING Do not use abrasives, alcoholic solvents or chemical solvents to clean them. Rear windows CAUTIONS Do not use any abrasive materials to clean the interior of the rear windows. Do not install stickers or labels to the interior of the rear windows. REPAIRING MINOR PAINT DAMAGE CAUTION Remove apparently harmless looking substances from the paintwork immediately (e.g. bird droppings, tree resins, insect remains, tar spots, road salt and industrial fall out). You should repair paintwork damage caused by stones from the road or minor scratches as soon as possible. A choice of products is available from your Ford Dealer. Read and follow the manufacturer’s instructions. 113 Vehicle battery 4. Connect the negative (-) terminal of vehicle B to the engine block or the engine mount of vehicle A (cable 2). JUMP-STARTING THE VEHICLE CAUTIONS Connect batteries with only the same nominal voltage. CAUTIONS Do not connect to the negative (–) terminal of the flat battery. Always use booster cables with insulated clamps and adequate size cable. Make sure that the cables are clear of any moving parts. Do not disconnect the battery from the vehicle’s electrical system. To start the engine 1. Run the engine of vehicle B at moderately high speed. 2. Start the engine of vehicle A. 3. Run both vehicles for a minimum of three minutes before disconnecting the cables. To connect the booster cables 1 A CAUTION Do not switch on the headlamps when disconnecting the cables. The peak voltage could blow the bulbs. B Disconnect the cables in the reverse order. 2 E75524 A Flat battery vehicle B Booster battery vehicle 1 Positive connection cable 2 Negative connection cable 1. Position the vehicles so that they do not touch one another. 2. Switch off the engine and any electrical equipment. 3. Connect the positive (+) terminal of vehicle A with the positive (+) terminal of vehicle B (cable 1). 114 Wheels and Tyres GENERAL INFORMATION WARNINGS Never place anything between the jack and the ground, or the jack and the vehicle. CAUTIONS Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. It is recommended to use a workshop type hydraulic jack for changing between summer and winter tyres. If you change the diameter of the tyres from that fitted at the factory, the speedometer may not display the correct speed. Take the vehicle to your dealer to have the engine management system reprogrammed. Note: Use a jack with a minimum lifting capacity of 1.5 tonnes and a lifting plate with a minimum diameter of 80 millimetres (3.1 inches). Transit Connect If you intend to change the size of the wheels from that fitted at the factory, check the suitability with your dealer. Your jack and wheelbrace are located in the bag behind the driver’s seat. 1. Move the driver's seat fully forwards See Front Seats (page 70). 2. Fold the seatback fully forwards. 3. Open the retaining straps on the bag and remove the wheelbrace. 4. Using the wheelbrace, remove the retaining screw. Note: Check your tyre pressures regularly to optimise fuel economy. A decal with tyre pressure data is located in the driver’s door opening at the B-pillar. Check and set the tyre pressure at the ambient temperature in which you are intending to drive the vehicle and when the tyres are cold. CHANGING A ROAD WHEEL Locking wheel nuts You can obtain a replacement locking wheel nut key and replacement locking wheel nuts from your dealer using the reference number certificate. E134540 Vehicle jack 5. Remove the jack. 6. Install in the reverse order. WARNINGS Before using the vehicle jack, check that it is not damaged or deformed and that the thread is lubricated and free from foreign matter. Tourneo Connect Your jack and wheelbrace are located in the left-hand sidewall of the load area. 115 Wheels and Tyres Jacking and lifting points CAUTION Use only the specified jacking points. If you use other positions, you may damage the body, steering, suspension, engine, braking system or the fuel lines. A B E93301 A Emergency use only B Maintenance 116 Wheels and Tyres A E93302 Small arrow-shaped marks on the sills A show the location of the jacking points. Spare wheel E76072 Detach the first cable by unscrewing and sliding back the cap. Turn the nipple at the end of the cable through 90 degrees. Detach the second cable by unscrewing the nut. Removing a road wheel WARNINGS Park your vehicle in such a position that neither the traffic nor you are hindered or endangered. E76071 Set up a warning triangle. Lower the spare wheel by inserting the hexagonal end of the wheelbrace into the guide hole. Turn the wheelbrace anticlockwise until the wheel rests on the ground and there is slack in the cable. Make sure that the vehicle is on firm, level ground with the wheels pointing straight ahead. Switch off the ignition and apply the parking brake. 117 Wheels and Tyres 1. WARNINGS If your vehicle has a manual transmission, select first or reverse gear. If it has an automatic transmission, select park. Insert the wheelbrace and carefully remove the wheel trim. Have the passengers leave the vehicle. Secure the diagonally opposite wheel with an appropriate block or wheel chock. Make sure that the arrows on directional tyres point in the direction of rotation when the vehicle is moving forwards. If you have to fit a spare wheel with the arrows pointing in the opposite direction, have the tyre refitted in the correct direction by a properly trained technician. 2 3 Do not work underneath the vehicle when it is supported only by a jack. Make sure that the jack is vertical to the jacking point and the base is flat on the ground. E133966 CAUTION 2. Install the locking wheel nut key. 3. Slacken the wheel nuts. 4. Jack up the vehicle until the tyre is clear of the ground. 5. Remove the wheel nuts and the wheel. Do not lay alloy wheels face down on the ground, this will damage the paint. Installing a road wheel WARNINGS Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. See Technical Specifications (page 120). Do not fit run flat tyres on vehicles that were not originally fitted with them. Please contact your dealer for more details regarding compatibility. E133965 118 Wheels and Tyres CAUTION WARNING Do not install alloy wheels using wheel nuts designed for use with steel wheels. Have the wheel nuts checked for tightness and the tyre pressure checked as soon as possible. Note: The wheel nuts of alloy wheels and spoked steel wheels can also be used for the steel spare wheel for a short time (maximum two weeks). Note: If the spare wheel is different in size or construction to the road wheels, have this replaced as soon as possible. Stowing the wheel Note: Make sure the wheel and hub contact surfaces are free from foreign matter. CAUTION Note: Make sure that the cones on the wheel nuts are against the wheel. Do not raise the spare wheel carrier without the wheel attached. Damage can occur to the winch mechanism if lowered without a wheel attached. 1. Install the wheel. 2. Install the wheel nuts finger tight. 3. Install the locking wheel nut key. TYRE CARE 1 4 3 5 E70415 2 To make sure the front and rear tyres of your vehicle wear evenly and last longer, we recommend that you swap the tyres from front to rear and vice versa at regular intervals of between 5000 and 10000 kilometres (3000 and 6000 miles). E75442 4. Partially tighten the wheel nuts in the sequence shown. 5. Lower the vehicle and remove the jack. 6. Fully tighten the wheel nuts in the sequence shown. 7. Install the wheel trim using the ball of your hand. CAUTION Do not scrub the sidewalls of the tyres when you are parking. If you have to mount a kerb, do so slowly and approach it with the wheels at right-angles to the kerb. 119 Wheels and Tyres Examine the tyres regularly for cuts, foreign objects and uneven wear of the tread. Uneven wear could mean that the wheel alignment is outside specification. USING SNOW CHAINS WARNINGS Do not exceed 50 km/h (30 mph). Check the tyre pressures (including the spare) when cold, every two weeks. Do not use snow chains on snow-free roads. USING WINTER TYRES Do not fit snow chains to 205/55 R 16 tyres. CAUTION Make sure that you use the correct wheel nuts for the type of wheel the winter tyres are fitted to. CAUTION If your vehicle is fitted with wheel trims, remove them before fitting snow chains. If winter tyres are used, make sure that the tyre pressures are correct. See Technical Specifications (page 120). Note: The ABS will continue to operate normally. Only use small link snow chains. Only use snow chains on the front wheels. TECHNICAL SPECIFICATIONS Transit Connect Wheel nut torque Wheel type Nm (Ib-ft) Steel - type 1 90 (66.4) Steel - type 2 135 (99.6) Alloy 120 (88.5) 120 Wheels and Tyres Type 1 - Closed end, two piece wheel nut Type 2 - Open end, one piece wheel nut E131504 E131503 Short wheelbase Tyre Pressures Normal Load Variant Tyre Size Full Load Front Rear Front Rear bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) T200 195/65 R 15 2.2 (32) 2.5 (36) 2.3 (33) 3.0 (44) T220 195/65 R 15 2.2 (32) 2.5 (36) 2.4 (35) 3.4 (49) Long wheelbase Tyre Pressures Normal Load Variant Tyre Size Full Load Front Rear Front Rear bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) T210 195/65 R 15 2.3 (33) 2.7 (39) 2.3 (33) 3.4 (49) T220 195/65 R 15 2.3 (33) 2.7 (39) 2.5 (36) 3.4 (49) T230 195/65 R 15 2.3 (33) 2.7 (39) 2.5 (36) 3.4 (49) Tourneo Connect 121 Wheels and Tyres Short wheelbase Tyre Pressures Normal Load Variant Tyre Size Full Load Front Rear Front Rear bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) K210 205/55 R 16 2.2 (32) 2.2 (32) 2.2 (32) 2.8 (41) K200 195/65 R 15 2.2 (32) 2.5 (36) 2.2 (32) 3.0 (44) K210 (500 Kg) 195/65 R 15 2.2 (32) 2.2 (32) 2.2 (32) 2.8 (41) K210 (625 Kg) 195/65 R 15 2.2 (32) 2.5 (36) 2.2 (32) 3.0 (44) K220 195/65 R 15 2.2 (32) 2.5 (36) 2.4 (35) 3.4 (49) K230 195/65 R 15 2.2 (32) 2.5 (36) 2.4 (35) 3.4 (49) Long wheelbase Tyre Pressures Normal Load Variant Tyre Size Full Load Front Rear Front Rear bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) bar (lbf/in²) K220 195/65 R 15 2.3 (33) 2.7 (39) 2.3 (33) 3.4 (49) K230 195/65 R 15 2.3 (33) 2.7 (39) 2.3 (33) 3.4 (49) 122 Vehicle identification VEHICLE IDENTIFICATION PLATE VEHICLE IDENTIFICATION NUMBER Note: The vehicle identification plate design may vary to that shown. Note: The information shown on the vehicle identification plate is dependant upon market requirements. B A E93897 E D C The vehicle identification number is stamped into the floor panel in front of the right-hand seat. It is also shown on the left-hand side of the instrument panel. E85610 A Vehicle identification number B Gross vehicle weight C Gross train weight D Maximum front axle weight E Maximum rear axle weight LOAD APPORTIONING VALVE (LAV) PLATE Certain vehicles are fitted with a load apportioning valve (LAV) plate on the left-hand rear door pillar, quoting the settings for this valve. These settings should only be made by an expert. The vehicle identification number and maximum weights are shown on a plate located on the lock side of the right-hand front door aperture at the bottom. 123 Capacities and Specifications TECHNICAL SPECIFICATIONS Vehicle dimensions Short wheelbase D A D A C E B E76188 124 Capacities and Specifications Item Dimension Description Dimension in mm (inches) A Overall length 4324 (170.2) B Overall width including exterior mirrors 2113 (83.2) C Overall height 1804-1837 (71.0-72.3) D Wheelbase 2665 (104.9) E Track - Front 1505 (59.3) E Track - Rear 1552 (61.1) 125 Capacities and Specifications Long wheelbase D A D A C E B E76189 126 Capacities and Specifications Item Dimension Description Dimension in mm (inches) A Overall length 4571 (180.0) B Overall width including exterior mirrors 2113 (83.2) C Overall height 1970-1982 (77.5-78.0) D Wheelbase 2912 (114.6) E Track - Front 1505 (59.3) E Track - Rear 1552 (61.1) 127 Capacities and Specifications Towing equipment dimensions A B C E D F G E76190 Item Dimension Description Dimension in mm (inches) A Bumper – end of towball Min 90 (3.5) B Attachment point – centre of towball 91.1 (3.6) 128 Capacities and Specifications Item Dimension Description Dimension in mm (inches) C Wheel centre – centre of towball 834 (32.8) D Centre of towball – side member 460 (18.1) E Outer side of side member 920 (36.2) F Centre of towball – centre 1. attachment point 413.3 (16.3) G Centre of towball – centre 2. attachment point 566.3 (22.3) All measurements refer to towing equipment officially released by Ford. 129 Audio introduction IMPORTANT AUDIO INFORMATION WARNINGS Due to technical incompatibility, recordable (CD-R) and rewritable (CD-RW) discs may not function correctly. E66257 Disc labels Audio CD These units will play compact discs that conform to the International Red Book standard audio specification. Copy protected CDs from some manufacturers do not conform to this standard and playback cannot be guaranteed. Dual format, dual sided discs (DVD Plus, CD-DVD format), adopted by the music industry, are thicker than normal CDs and consequently playback cannot be guaranteed, and jamming could occur. Irregular shaped CDs and CDs with a scratch protection film or self adhesive labels attached should not be used. Warranty claims, where this type of disc is found to be inside an audio unit returned for repair, will not be accepted. E66254 MP3 All units except Sony CD (but not the 6CD) are designed to play commercially pressed 12 cm audio compact discs only. The Sony CD unit will play 8 cm discs with a Sony approved adaptor fitted (CSA-8). E66255 The audio unit may be damaged if unsuitable items like credit cards or coins are pushed inside the CD aperture. Audio unit labels E66256 130 Audio unit overview AUDIO UNIT OVERVIEW A C B P D O E N F M G H L I K J I E138368 A CD aperture. See Loading compact discs (page 141). B On, off and volume control. See On/off control (page 135). C CD eject. See Ejecting compact discs (page 142). D Clock. See Setting the clock and date on the audio unit (page 134). E Balance and fade control. See Balance/fade control (page 135). F Bass and treble control. See Bass/treble control (page 135). G Menu. See Audio menu control (page 135). H End call. See Telephone (page 145). I Station presets. See Station preset buttons (page 137). J Seek up. See Station tuning control (page 138). K Seek down. See Station tuning control (page 138). L Accept call. See Telephone (page 145). M Traffic announcement. See Traffic information control (page 137). N Waveband select. See Waveband button (page 137). 131 Audio unit overview O Auxiliary select. See Auxiliary input (AUX IN) socket (page 143). P CD select. See Compact disc player (page 141). 132 Audio system security Each unit incorporates a unique code that must be entered before the unit will operate. If the display shows WAIT 30, the unit will be locked for 30 minutes. Wait until the timer counts down to zero. When CODE is shown in the display, enter the correct code. If the battery is disconnected or if the unit has been removed from the vehicle, the code must be re-entered before the unit will operate. Note: After 10 incorrect attempts the unit will be permanently inoperative and LOCKED will be shown in the display. See your dealer. SECURITY CODE LOST SECURITY CODE If you lose the unique code, contact your dealer and supply details of your audio unit along with some proof of identity. ENTERING A SECURITY CODE If CODE - - - -, CODE 0000 or ENTER KEYCODE appears in the display when you switch on the audio unit, you must enter the unique code using the station preset buttons. 1. Using the station present buttons enter the unique code. 2. If you make a mistake entering the code, re-enter the digits by continuing to select bottons 0-9. The display will advance from digit position 1 to 4 and then back again. 3. Make sure that the complete code is correct before pressing the # button. INCORRECT SECURITY CODE Up to a maximum of 10 unique code entry attempts are allowed with various consequences if you get it wrong. The number of attempts will be shown in the display. If the display reverts to CODE another entry attempt may be made immediately. 133 Audio unit clock and date displays SETTING THE CLOCK AND DATE ON THE AUDIO UNIT Changing the date and time Press the CLOCK button to display the date and time. Note: If you do not press another button within 30 seconds of pressing the CLOCK button, the display will return to its previous setting. 1. Using the seek up or seek down button select the date or time value that you wish to change. The selected value will flash in the display. 2. Rotate the volume control to change the selected date or time value. 3. Using the seek up or seek down button select additional date or time values that you wish to change. 4. Rotate the volume control to change the selected date or time value. 5. Press the CLOCK button to exit and save your settings. Note: If you do not press the CLOCK button within 30 seconds of changing a date or time value, the display will exit and save the new values automatically. Note: Press and hold the CLOCK button for more than two seconds to automatically select the hour value for winter or summer time adjustment. 12/24 hour format 1. Press the MENU button repeatedly until the 12/24 icon is shown in the display. 2. Using the seek up or seek down button select your required setting. 3. Press the MENU button repeatedly or allow the system to time out to confirm your selection. 134 Audio unit operation ON/OFF CONTROL BALANCE/FADE CONTROL Press the on/off control. This will also operate the unit for up to one hour with the ignition turned off. The balance function is used to adjust the sound distribution between the left and right speakers. The radio will switch off automatically after one hour. The fade function is used to adjust the sound distribution from front to rear in vehicles fitted with rear speakers. BASS/TREBLE CONTROL 1. Press the FADE/BAL button once for fade or twice for balance. 2. Use the volume control or on some units the seek up or seek down button to make the necessary adjustment. The bass function is used to adjust the low-frequency response of the audio unit. The treble function is used to adjust the high-frequency response of the audio unit. AUDIO MENU CONTROL Note: The selected level will be shown in the display. Use the MENU button to access functions that cannot be selected directly via one of the control buttons. Press the MENU button for first level functions, or press and hold the MENU button for other second level functions. Press the BASS/TRE button once for bass or twice for treble. 2. Use the volume control or on some units the seek up or seek down button to make the necessary adjustment. 1. Menu functions First level Second level During radio reception During tape playback During CD playback During all functions Manual tuning 12/24 hour Scan Traffic local or distant Scan tuning AVC 12/24 hour ADV menu Repeat REG AVC - Comp News ADV menu - 12/24 hour CLIP - - AVC * Shuffle * 135 * ** AF VID Audio unit operation Menu functions First level Second level During radio reception During tape playback During CD playback During all functions - - ADV menu Bluetooth enable/ disable Note: The sequence in which functions appear may vary for different audio units and vehicles. Note: Second level functions (advanced) can also be entered by selecting ADV menu from the first level menu. * Automatic volume control. ** Alternative frequencies. 136 Audio unit operation When the search is complete, sound is restored and the strongest signals are stored on the autostore presets. STATION PRESET BUTTONS This feature allows you to store your favourite stations so that they can be recalled by selecting the appropriate waveband and pressing one of the preset buttons. Press and hold the AM/FM button. TRAFFIC INFORMATION CONTROL 1. Select a waveband. 2. Tune to the station required. 3. Press and hold one of the preset buttons. The audio unit will mute. When sound returns the station has been stored. Many stations that broadcast on the FM waveband have a TP code to signify that they carry traffic programme information. Activating traffic announcements This can be repeated on each waveband and for each preset button. Before you can receive traffic announcements, you must press the TA button. Either TA-D or TA-L will be shown in the display to indicate that the feature is switched on. Note: When you drive to another part of the country, FM RDS (radio data system) stations that broadcast on alternative frequencies are stored on the preset buttons. If you are already tuned to a station that broadcasts traffic information, TP will also be shown in the display. Otherwise the unit will search for a traffic programme and display TP SEEK while doing so. If it cannot locate such a station, NOT FOUND will be shown in the display. WAVEBAND BUTTON Note: The AM/FM or RADIO button can also be used to return to radio reception when you have been listening to another source. TP will be shown within a box in the display when you are tuned to a station providing traffic information from a linked RDS (radio data system) or EON (enhanced other network) station. Press the AM/FM button to select from the wavebands available. When traffic information is broadcast, it will automatically interrupt normal radio, tape or CD playback and TRAFFIC or NEWS will be shown in the display. AUTOSTORE CONTROL Note: This function will overwrite the previously stored autostore preset stations. If the traffic signal weakens, TP will flash in the display. Press the seek up or seek down button to find another station. Note: This function can also be used to store stations manually in the same way as other wavebands. Note: If this happens during CD or AUX playback or, on certain models, with the radio volume set to zero, the unit will retune automatically if the station is not available. Note: The strongest signals available on the selected waveband will be stored. The sound is muted and AUTOSTORE will be shown in the display while the unit searches through the frequencies. 137 Audio unit operation Ending traffic announcements If a non-traffic station is selected or recalled using a preset button, the audio unit will remain on that station unless TA is turned off, then on again. The audio unit will return to normal operation at the end of each traffic announcement. To end the announcement prematurely, press TA during the announcement. Note: If TA is on and you select a preset or manual tune to a non TA station no traffic announcement will be heard. Note: If you press TA at any other time it will switch all announcements off. Local or distant traffic The number of RDS or EON traffic announcements may become excessive in some areas so there is an option to select between local traffic information and all available information. STATION TUNING CONTROL Seek tuning Select a waveband and briefly press the seek up or seek down button. The unit will stop at the first station it finds in the direction you have chosen. Press and hold the MENU button until the display changes. 2. Press the MENU button repeatedly until TA is shown in the display. 3. Press the seek up or seek down button to select either local (TA LOCAL) or distant (TA DIST) traffic announcements. 4. Press the MENU button or allow the menu to time out to confirm your selection. 1. Manual tuning 1. Note: Either TA-L or TA-D will be shown in the display. Select a waveband and press the MENU button until MAN is shown in the display. 2. Press the seek up or seek down button to tune up or down the waveband in small increments or press and hold to increment quickly, until you find a station you want to listen to. Traffic announcement volume Scan tuning Traffic announcements interrupt normal broadcasts at a preset minimum level that is usually louder than normal listening volumes. The scan function allows you to listen to 10 seconds of each station detected. Press the MENU button repeatedly until SCAN is shown in the display. 2. Press the seek up or seek down button to scan up or down the selected waveband. 3. Press the seek up or seek down button or the MENU button to continue listening to a station. 1. To adjust the preset volume 1. Press and hold the TA button. 2. Rotate the volume control to make the necessary adjustment. Note: The selected level will be shown in the display. 138 Audio unit menus If your radio has AF (alternative frequencies) tuning switched on and you move from one transmission area to another, this function will search for and switch to a stronger station signal, if one can be found. AUTOMATIC VOLUME CONTROL This function adjusts the volume level to compensate for engine and road speed noise. Under certain conditions, however, AF tuning may temporarily disrupt normal reception. Press the MENU button repeatedly until AVC is shown in the display. 2. Use the seek up or seek down button to adjust the setting. 3. Press the MENU button or allow the system to time out to confirm your selection. 1. When selected, the unit continually evaluates signal strength and, if a better signal becomes available, the unit will switch to that alternative. It mutes while it checks a list of alternative frequencies and, if necessary, it will search once across the selected waveband for a genuine alternative frequency. AUDIO DISTORTION REDUCTION (CLIP) It will restore radio reception when it finds one or, if one is not found, the unit will return to the original stored frequency. On certain units, NOT FOUND will be shown in the display. This function automatically detects sound distortion and reduces the volume level until the distortion has been eliminated. This means that whilst the display might change numerically when you raise the volume manually with the control, there may be no actual increase in sound. With AF-MAN selected, the unit operates in a similar way to AF-AUTO or AF-ON, but only searches for an alternative frequency when prompted by pressing a preset button. 1. Press and hold the MENU button until the display changes. 2. Press the MENU button repeatedly until CLIP is shown in the display. 3. Using the seek up or seek down button turn the function on or off. 4. Press the MENU button or allow the system to time out to confirm your selection. With AF-OFF selected, the original stored frequency remains selected. In this mode, AF-OFF will be displayed every time the unit is turned on. Press and hold the MENU button until the display changes. 2. Press the MENU button repeatedly until AF is shown in the display. 3. Using the seek up or seek down button select the required setting. 4. Press the MENU button or allow the system to time out to confirm your selection. 1. ALTERNATIVE FREQUENCIES Many programmes broadcast on the FM waveband have a PI (programme identification) code, which can be recognised by audio units. 139 Audio unit menus During news broadcasts, the display alternates between the station name and NEWS. News interrupts are broadcast at the same preset volume level as traffic announcements. REGIONAL MODE (REG) The function REG (regional mode) controls the behaviour of AF switching between regionally related networks of a parent broadcaster. A broadcaster may run a fairly large network across a large part of the country. At various times of the day this large network may be broken down into a number of smaller regional networks, typically centred on major towns or cities. When the network is not split into regional variants, the whole network caries the same programming. 1. Press and hold the MENU button until NEWS is shown in the display. 2. Using the seek up or seek down button turn the function on or off. 3. Press the MENU button to confirm your selection. Regional mode ON: This prevents random AF switches when neighbouring regional networks are not carrying the same programming. Regional mode OFF: This allows a larger coverage area if neighbouring regional networks are carrying the same programming, but can cause random AF switches if they are not. Press and hold the MENU button until the display changes. 2. Press the MENU button repeatedly until REG is shown in the display. 3. Using the seek up or seek down button turn the function on or off. 4. Press the MENU button or allow the system to time out to confirm your selection. 1. NEWS BROADCASTS Some audio units interrupt normal reception to broadcast news bulletins from stations on the FM waveband linked stations, in the same way as traffic information is provided. 140 Compact disc player LOADING COMPACT DISCS SHUFFLE/RANDOM Always check that the CD aperture is empty before inserting a CD. Random track playback, also known as shuffle, plays all tracks on a CD in random order. Insert a CD, label side up, into the audio unit. Note: When SHUFF CD is selected only the tracks on the current CD will be shuffled. When SHUF ALL is selected the tracks on all the CD's will be shuffled. TRACK SELECTION Press the seek down button repeatedly to select previous tracks. Press the MENU button repeatedly until SHUF is shown in the display. 2. Using the seek up or seek down button scroll through the display until SHUF ALL or SHUFF CD is shown in the display. 3. Using the seek up or seek down button select the next track to shuffle if required. COMPACT DISC PLAYBACK Note: With the function on, SHUFFLE will be shown in the display as each new track is selected. Note: During playback, the display indicates the disc, track and time that has elapsed since the start of the track. COMPACT DISC TRACK COMPRESSION 1. Press the seek up button once to move to the next track or press it repeatedly to access later tracks. Press the seek down button once to replay the current track. If pressed within two seconds of the start of a track, the previous track will be selected. Note: On CD changer audio units, if two or more CD's are loaded one after the other, playback will start with the last CD loaded. Press MENU repeatedly until COMP is shown in the display. 2. Using the seek up or seek down button turn the function on or off. 3. Press the MENU button to confirm your selection. 1. During radio reception, press the CD button once to start CD playback. Playback will start immediately after a disc is loaded. COMPACT DISC TRACK SCANNING FAST FORWARD/REVERSE Press and hold the seek up or the seek down button to search forwards or backwards within the tracks on the disc. The SCAN function allows you to preview each track for approximately 10 seconds. Note: When selected, SCAN will be shown briefly in the display at the start of each track. 141 Compact disc player 1. Press the MENU button repeatedly until SCAN is shown in the display. 2. Using the seek up or seek down button select either SCAN CD or SCAN ALL. 3. Press the seek up or seek down button again to continue listening to a track. EJECTING COMPACT DISCS Note: Radio reception is restored automatically when the EJECT button is pressed. Note: If the EJECT button is pressed in error, press the button again to cancel. Note: If the CD is not removed it will be pulled back into the audio unit. Press the EJECT button at any time and remove the CD. REPEAT COMPACT DISC TRACKS 1. Press the MENU button repeatedly until REPEAT is shown in the display. 2. Using the seek up or seek down button choose between OFF and TRK. ENDING COMPACT DISC PLAYBACK Press the AM/FM or AUX button. Note: This will not eject the CD; the disc will merely pause at the point where radio reception was restored. To resume CD playback, press the CD button again. 142 Auxiliary input (AUX IN) socket AUXILIARY INPUT (AUX IN) SOCKET Note: For optimum performance when using any auxiliary device set the volume on the device high. This will reduce audio interference when charging the device via the vehicle power supply socket. When fitted the Auxiliary input (AUX IN) socket permits an auxiliary device, such as an MP3 player, to be linked into the vehicle audio system. Output can be played through the vehicle speakers. To connect an auxiliary device, plug it into the AUX IN socket using a 3.5 mm conventional audio jack connector. Select the auxiliary input via the AUX button and playback will be heard through the vehicle speakers. AUX will be shown in the display. Volume, treble and bass can be adjusted on the audio unit as normal. The audio unit buttons can also be used to restore playback from the audio unit, while the auxiliary device remains connected. 143 Audio troubleshooting AUDIO TROUBLESHOOTING Audio unit display Rectification CD ERROR PLEASE CHECK CD CDC ERROR General error message for CD fault conditions, for example cannot read the CD, data-CD inserted. May also indicate a audio unit malfunction. Make sure that the disc is correctly loaded, clean and re- load the CD or replace the CD with a known music CD. See Ejecting compact discs (page 142). See Loading compact discs (page 141). If error continues. See your dealer. NO CD NO CDS NO CD # Message to indicate that the audio unit or CD changer is empty. Insert a CD. See Loading compact discs (page 141). HIGH TEMP CD DRIVE HIGH TEMP Ambient temperature too hot – unit will not work until it has cooled down. SLOT FULL Message to indicate that the CD slot is already loaded. Eject the CD from selected slot before attempting load operation or select another slot location. See Loading compact discs (page 141). CDC FULL Message to indicate that the audio unit is full. See Ejecting compact discs (page 142). DATA CD An incompatible CD has been inserted, for example not an audio CD. See Ejecting compact discs (page 142). CODE ---- Message to prompt you for the Keycode. See Entering a security code (page 133). WAIT Message to inform you to wait until the next keycode entry attempt can be made. See Incorrect security code (page 133). TRIES Message indicates the number of incorrect input attempts. See Incorrect security code (page 133). LOCKED Message to inform you that audio unit security system has locked the unit after repeated incorrect keycode entries. See your dealer. KEYCODE.... ENTER KEYCODE.... Message to prompt you for the Keycode. See Entering a security code (page 133). INCORRECT Message to inform you that the entered keycode is incorrect. See Incorrect security code (page 133). 144 Telephone Phonebook categories GENERAL INFORMATION Depending on your phonebook entry, different categories can be displayed in the audio unit. CAUTION Using the system with the engine off will drain the battery. For example: This section describes the functions and features of the Bluetooth mobile phone hands free system. M Mobile O Office The Bluetooth mobile phone part of the system provides interaction with the audio or navigation system and your mobile phone. It allows you to use the audio or navigation system to make and receive calls without having to hold your mobile phone. H Home F Fax Note: Entries may be displayed without a category attachment. The category can also be indicated as an icon: Compatibility of phones Phone CAUTION E87990 As no common agreement exists, mobile phone manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the phone and hands-free system, which in some cases may significantly degrade the system performance. To avoid this situation, only recommended phones should be used. Mobile E87991 Home E87992 Office E87993 Fax Please visit the website www.fordmobile-connectivity.com for full details. E87994 TELEPHONE SETUP Making a phone an active phone Phonebook When using the system for the first time, no phone is connected to the system. After start up access to the phonebook list can be delayed for several minutes, depending upon the size. Bluetooth phone After bonding a Bluetooth phone to the system, this becomes the active phone. For further information refer to the phone menu. 145 Telephone Select the phone from the active phone menu. 1. The Bluetooth feature must be activated on the phone and on the audio unit. Make sure the Bluetooth menu option in the audio unit is set to ON. For information on phone settings, refer to your phone user guide. 2. In the Bluetooth menu on your phone, search for Ford Audio and select it. 3. Enter the code number shown on the vehicle display using the phone keypad. If no code number is shown on the display, enter the Bluetooth PIN number 0000 using the phone keypad. Now enter the Bluetooth PIN number shown on the vehicle display. 4. If your mobile phone asks you to authorize the automatic connection, select YES. Turning the ignition and radio or navigation unit back on again, the last active phone is picked up by the system. Note: In some cases the Bluetooth connection must also be confirmed on the phone. Bond another Bluetooth phone Bond a new Bluetooth phone as described in the requirements for a Bluetooth connection. Phones stored in the system are accessible by using the phone list on the audio unit. Note: A maximum of six devices may be bonded. If six Bluetooth devices have already been bonded, one of these has to be debonded in order to bond a new device. Note: A phone call will be disconnected if the audio unit is switched off. If the ignition key is turned to the off position the phone call will remain in progress. BLUETOOTH SETUP TELEPHONE CONTROLS Before you can use your telephone with your vehicle it must be bonded to the vehicle telephone system. Remote control Handling of phones Up to six Bluetooth devices can be bonded to the vehicle system. Note: If there is an ongoing call when the phone in use is selected as the new active phone, the call is transferred to the vehicle audio system. Note: Even if connected to the car system, your phone can still be used in the usual way. Requirements for Bluetooth connection E116297 The following are required before a Bluetooth phone connection can be made. Incoming calls can be accepted by pressing the MODE button once. Press the button again to end the call. 146 Telephone Ending a call USING THE TELEPHONE VEHICLES WITHOUT: NAVIGATION SYSTEM Calls can be ended by pressing the call reject button. Note: Refer to your audio guide for details of the controls. Audio units without a telephone keypad can also end a call by pressing either PHONE, CD, AM/FM or ON/OFF, or by pressing the MODE button on the remote control An active phone must be present. Redialling a number Even if connected to the audio unit, your phone can still be used in the usual way. 1. This chapter describes the phone functions of the audio unit. Press the PHONE or the call accept button. 2. Press the MENU button. 3. Select the CALL OUT list or the CALL IN list. On some audio units, select the MISSED, INCOMING or OUTGOING calls list. Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled. Note: You can exit the phone menu by pressing any source button CD, AM/FM or AUX. Making a call Dialling a number using voice control Phone numbers can be dialled using voice control. See Telephone commands (page 158). 4. Press the seek button on the audio unit. 5. Press the PHONE or the call accept button to dial the desired phone number. Dialling a number using the address book You can access your phone address book via Bluetooth. The entries will appear in the unit display. Receiving an incoming call Accepting an incoming call Press the PHONE or the call accept button. 2. Press the MENU button. 3. Keep pressing the MENU button until PHONEBOOK appears. 4. Press the seek buttons to select the desired phone number. Note: Press and hold the seek button to skip to the next letter in the alphabet. 1. Incoming calls can be accepted by pressing either the call accept button, the PHONE button or the MODE button on the remote control. Rejecting an incoming call Incoming calls can be rejected by pressing the call reject button. Audio units without a telephone keypad can also reject a call by pressing either PHONE, CD, AM/FM or ON/OFF. 5. Press the PHONE or the call accept button to dial the selected phone number. Receiving a second incoming call Note: The second incoming call function must be activated in your phone. 147 Telephone If there is an incoming call whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call. 2. Press the preset number required (using the station preset buttons 1 - 6). Accepting a second incoming call Note: After bonding a phone to the system, this becomes the active phone. Using the audio unit menu Second incoming calls can be accepted by pressing either the call accept button, the PHONE button, or the MODE button on the remote control. 2. Rejecting a second incoming call 3. 1. Second incoming calls can be rejected by pressing the call reject button. Units without a telephone keypad can also reject a second incoming call by pressing the CD button, or the AM/FM button. 4. 5. Muting the microphone Debonding a bonded phone During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display. A bonded phone can be deleted from the system at any time, unless a phone call is in progress. Audio units with green call accept button 1. Press the call accept button. Press the button once again to turn this function off. 2. Audio units without green call accept button 3. Press the seek up or down button. Press the button once again to turn this function off. 4. Changing the active phone 5. Note: Phones must be bonded to the system before they can be made active. Press the PHONE or call accept button. Press the MENU button on the audio unit. Select the DEBOND option on the audio unit. Scroll through the different phones by using the seek buttons and display the phone to be debonded. Press the MENU button to select the phone which is to be debonded. USING THE TELEPHONE VEHICLES WITH: NAVIGATION SYSTEM Using the station storage button Note: This process is only for audio units without a telephone keypad. 1. Press the PHONE or call accept button. Press the MENU button on the audio unit. Select the ACTIVE PHONE option on the audio unit. Scroll through the different stored phones by using the seek buttons to display the bonded phones. Press the MENU button to select the phone which is to be the active phone. This chapter describes the phone functions of the Navigation System. Press the PHONE button on the audio unit. 148 Telephone If there is an incoming call, whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call. Note: Refer to your Navigation System guide for details of the controls. An active phone must be present. Even if connected to the Navigation System, your phone can still be used in the usual way. Accepting a second incoming call Second incoming calls can be accepted by pressing either the call accept button, the MODE button on the remote control, the PHONE button on the unit or by using the ACCEPT option in the menu. Making a call Dialling a number Phone numbers can be dialled using voice control. See Voice control (page 151). Note: This will cancel the ongoing call. Ending a call Rejecting a second incoming call Calls can be ended by pressing either the END button, the MODE button on the remote switch or the ON/OFF button on the navigation system. Second incoming calls can be rejected by pressing either the call reject button, or one of the following buttons on the unit: CD, AM/FM. Redialling a number Muting the microphone 1. Press the PHONE button on the unit. 2. Select REDIAL. During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display. Receiving an incoming call SD navigation units Accepting an incoming call Press the mute button (symbol of a microphone with a line through it). Press the button once again to turn this function off. Incoming calls can be accepted by pressing either the call accept button, the MODE button on the remote control, the PHONE button on the unit or by using the ACCEPT option in the menu. CD navigation units Press the microphone mute button. Press the button once again to turn this function off. Rejecting an incoming call Incoming calls can be rejected by pressing either the call reject button, the CD or AM/FM buttons on the unit, or by using the REJECT option in the menu. Changing the active phone Note: Phones must be bonded to the system before they can be made active. Receiving a second incoming call Note: After bonding a phone to the system, this becomes the active phone. Note: The second incoming call function must be activated in your phone. 1. 149 Press the PHONE button on the unit. Telephone 2. Using the BT SETTINGS option in the menu, select the active phone from the list. Debonding a bonded phone A bonded phone can be deleted from the system at any time, unless a phone call is in progress. 1. Press the PHONE button on the unit. 2. Select the BT SETTINGS option in the menu. 3. Select the DEBOND option in the menu. 4. Select the phone from the list. 150 Voice control Do not try to give any commands until the beep tone has been heard. The voice control system will repeat each spoken command back to you. PRINCIPLE OF OPERATION CAUTION Using the system with the engine off will drain the battery. If you are not sure how to continue say "HELP" for assistance or "CANCEL" if you do not wish to continue. Voice recognition enables operation of the system without the need to divert your attention from the road ahead in order to change settings, or receive feedback from the system. The "HELP" function provides only a subset of the available voice commands. Detailed explanations of all possible voice commands can be found on the following pages. Whenever you issue one of the defined commands with the system active, the voice recognition system converts your command into a control signal for the system. Your inputs take the form of dialogues or commands. You are guided through these dialogues by announcements or questions. Voice commands All voice commands should be given using a natural speaking voice, as if speaking to a passenger or on the phone. Your voice level should be dependant on the surrounding noise level inside or outside the vehicle but do not shout. Please familiarise yourself with the functions of the system before using voice recognition. USING VOICE CONTROL Supported commands System operation The voice control system allows you to control the following vehicle functions: The order and content of the voice controls are given in the following lists. The tables show the sequence of user voice commands and system responses for each available function. • Bluetooth phone • radio • CD Player/CD Changer • SD card • navigation system (DVD units only refer to separate DVD navigation handbook). <> indicates a number or stored name tag to be inserted by the user. Short cuts There are a number of voice command short cuts available, which allow you to control some vehicle features without having to follow the complete command menu. These are: Note: The voice control system is language specific. If you require the system to operate in another language please consult your dealer. • System response • As you work through a voice session the system will prompt you with a beep tone each time the system is ready to proceed. 151 phone: "MOBILE NAME", "DIAL NUMBER", "DIAL NAME", and "REDIAL" CD player/CD changer: "DISC" and "TRACK" Voice control • • radio: "TUNE NAME" SD card: "TRACK". • Store up to 20 name tags per function. • The average recording time for each name tag is approximately 2-3 seconds. Start communicating with the system Before you can start talking to the system you first have to press the VOICE or MODE button for each operation and wait until the system answers with a beep. See Voice Control (page 31). AUDIO UNIT COMMANDS CD Player Press the button again to cancel the voice session. You can control playback directly by voice control. Name tag Overview The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. The name tag functionality can support the phone, audio and navigation features by using the "STORE NAME" function. You can assign name tags to items such as favourite radio stations and personal phone contacts. See Audio unit commands (page 152). See Telephone commands (page 158). See Navigation system commands (page 162). "CD PLAYER" "HELP" "PLAY" "TRACK" * "SHUFFLE ALL" "SHUFFLE FOLDER" ** "SHUFFLE OFF" "REPEAT FOLDER" ** "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Only available if the CD contains audio data files like MP3 or WMA. 152 Voice control Track You can choose a track on your CD directly. Steps User says System answer 1 "CD PLAYER" "CD PLAYER" 2 "TRACK NUMBER PLEASE" "TRACK" 3 "" * "TRACK " ** * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245) Shuffle all To set random playback. Steps User says System answer 1 "CD PLAYER" "CD PLAYER" 2 "SHUFFLE ALL" Overview Radio The overview below shows the available voice commands. The following lists will give further information about the complete command menu. The radio voice commands support the functionality of the radio and allow you to tune radio stations by voice control. "RADIO" "HELP" "AM" "FM" "TUNE NAME" * "DELETE NAME" "DELETE DIRECTORY" "PLAY DIRECTORY" 153 Voice control "RADIO" "STORE NAME" "PLAY" * Can be used as a shortcut. Tune frequency This function allows you to tune your radio by voice commands. Steps User says 1 "RADIO" "RADIO" 2 "AM" "AM FREQUENCY PLEASE" "FM" "FM FREQUENCY PLEASE" 3 "" System answer "TUNE " * * The frequency may be entered in a variety of ways. Refer below for representative examples. • • • • • FM band: 87.5 - 108.0 in increments of 0.1 • • • • • "Eighty nine point nine" (89.9) "Ninety" (90.0) "One hundred point five" (100.5) "One zero one point one" (101.1) "One zero eight" (108.0) "Five thirty one" (531) "Nine hundred" (900) "Fourteen forty" (1440) "Fifteen zero three" (1503) "Ten eighty" (1080) Store name AM/MW band: 531 - 1602 in increments of 9 If you have tuned a radio station, you can store it with a name in the directory. AM/LW band: 153 - 281 in increments of 1 Steps User says System answer 1 "RADIO" "RADIO" 2 "STORE NAME" "STORE NAME" "NAME PLEASE" 3 "" "REPEAT NAME PLEASE" 4 "" "STORING NAME" 154 Voice control Steps User says System answer " STORED" Tune name This function allows you to call up a stored radio station. Steps User says 1 "RADIO" 2 "TUNE NAME" 3 "" System answer "RADIO" "NAME PLEASE" * "TUNE " * Can be used as a shortcut. Delete name This function allows you to delete a stored radio station. Steps User says System answer 1 "RADIO" "RADIO" 2 "DELETE NAME" "NAME PLEASE" 3 "" "DELETE " "CONFIRM YES OR NO" 4 "YES" "DELETED" "NO" "COMMAND CANCELLED" Play directory This function allows you to let the system tell you all of the stored radio stations. Steps User says System answer 1 "RADIO" "RADIO" 2 "PLAY DIRECTORY" "PLAY " 155 Voice control Delete directory This function allows you to delete all stored radio stations at once. Steps User says System answer 1 "RADIO" "RADIO" 2 "DELETE DIRECTORY" "DELETE DIRECTORY" "CONFIRM YES OR NO" 3 "YES" "RADIO DIRECTORY DELETED" "NO" "COMMAND CANCELLED" Play This function switches the audio source to the radio mode. Steps User says System answer 1 "RADIO" "RADIO" 2 "PLAY" Auxiliary input This function allows you to switch the audio source to the attached auxiliary input device. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "LINE IN" "LINE IN" Overview SD Card The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. These voice commands support the functionality of an SD card which has suitable audio files written to it. 156 Voice control "SD CARD" "HELP" "PLAY" "TRACK" * "SHUFFLE ALL" "SHUFFLE FOLDER" "SHUFFLE OFF" "REPEAT TRACK" "REPEAT FOLDER" "REPEAT OFF" * Can be used as a shortcut. SD card play This function allows you to switch the audio source to the SD card audio files. Steps User says System answer 1 "SD CARD" "SD CARD" 2 "PLAY" SD card track You can choose a track on your SD card directly. Steps User says System answer 1 "SD CARD" "SD CARD" 2 "TRACK" 3 "" "TRACK NUMBER PLEASE" * * Can be used as a shortcut. 157 ** "TRACK " Voice control ** Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245). Overview TELEPHONE COMMANDS The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. Phone Your phone system allows you to create an additional phonebook. The stored entries can be dialled by voice control. Phone numbers stored by using voice control are stored on the vehicle system and not in your phone. "PHONE" "HELP" "MOBILE NAME" "DIAL NUMBER" "DIAL NAME" * * * "DELETE NAME" "DELETE DIRECTORY" "PLAY DIRECTORY" "STORE NAME" "REDIAL" * "ACCEPT CALLS" "REJECT CALLS" * Can be used as a shortcut. Phone functions Dial number Phone numbers can be dialled after giving the name tag voice command. 158 Voice control Steps User says System answer 1 "PHONE" "PHONE" 2 "DIAL NUMBER" 3 "" 4 "NUMBER PLEASE" * " CONTINUE?" "DIAL" "DIALLING" "CORRECTION" " CONTINUE?" * Can be used as a shortcut. Dial name Phone numbers can be dialled after giving the name tag voice command. Steps User says System answer 1 "PHONE" "PHONE" 2 "DIAL NAME" 3 "" 4 "YES" "DIALLING" "NO" "COMMAND CANCELLED" "NAME PLEASE" * "DIAL " "CONFIRM YES OR NO" * Can be used as a shortcut. Redial This function allows you to redial the last dialled phone number. Steps User says System answer 1 "PHONE" "PHONE" 2 "REDIAL" "REDIAL" "CONFIRM YES OR NO" * 159 Voice control Steps User says System answer 3 "YES" "DIALLING" "NO" "COMMAND CANCELLED" * Can be used as a shortcut. Mobile name This function allows you to access phone numbers stored with a name tag in your mobile phone. Steps User says 1 "PHONE" 2 "MOBILE NAME" System answer "PHONE" "MOBILE NAME" "" * * Can be used as a shortcut. Note: DTMF can only be used during an ongoing call. Press the VOICE button and wait for the system prompt. DTMF (Tone dialling) This function transfers spoken numbers into DTMF tones. For example, to make a remote enquiry to your home answering machine or to enter a PIN number etc. Steps Can only be used with vehicles installed with a dedicated VOICE button. User says System answer 1 2 "NUMBER PLEASE" "" Create a phonebook Store name New entries can be stored with the "STORE NAME" command. This feature can be used to dial a number by calling up the name instead of the full phone number. 160 Voice control Steps User says System answer 1 "PHONE" "PHONE" 2 "STORE NAME" "STORE NAME" "NAME PLEASE" 3 "" "REPEAT NAME PLEASE" 4 "" "STORING NAME" " STORED" "NUMBER PLEASE" 5 "" "" 6 "STORE" "STORING NUMBER" "" "NUMBER STORED" Delete name Stored names can also be deleted from the directory. Steps User says System answer 1 "PHONE" "PHONE" 2 "DELETE NAME" "NAME PLEASE" 3 "" "DELETE " "CONFIRM YES OR NO" 4 "YES" " DELETED" "NO" "COMMAND CANCELLED" Play directory Use this function to let the system tell you all stored entries. Steps User says System answer 1 "PHONE" "PHONE" 2 "PLAY DIRECTORY" "PLAY DIRECTORY" 161 Voice control Delete directory This function allows you to delete all entries in one go. Steps User says System answer 1 "PHONE" "PHONE" 2 "DELETE DIRECTORY" "DELETE DIRECTORY" "CONFIRM YES OR NO" 3 "YES" "DIRECTORY DELETED" "NO" "COMMAND CANCELLED" Main settings Reject calls Calls can be set to be automatically rejected using voice control. Steps User says System answer 1 "PHONE" "PHONE" 2 "REJECT CALLS" "REJECT CALLS" "ACCEPT CALLS" "ACCEPT CALLS" * * use this command to turn the reject mode off NAVIGATION SYSTEM COMMANDS Please refer to your separate Navigation manual for details of the command menus. 162 Appendices TYPE APPROVALS ELECTROMAGNETIC COMPATIBILITY FCC/INDUSTRY CANADA NOTICE WARNINGS Your vehicle has been tested and certified to legislations relating to electromagnetic compatibility (72/245/EEC, UN ECE Regulation 10 or other applicable local requirements). It is your responsibility to ensure that any equipment you have fitted complies with applicable local legislations. Have any equipment fitted by properly trained technicians. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: WJLRX-42 IC: 7847A-RX42 Changes or modifications to your device not expressly approved by the party responsible for compliance can void the user's authority to operate the equipment. Radio frequency (RF) transmitter equipment (e.g. cellular telephones, amateur radio transmitters etc.) may only be fitted to your vehicle if they comply with the parameters shown in the table below. There are no special provisions or conditions for installations or use. RX-42 - declaration of conformity We, the party responsible for compliance, declare under our sole responsibility that the Handset Integration product RX-42 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at: Do not mount any transceiver, microphones, speakers, or any other item in the deployment path of the airbag system. Do not fasten antenna cables to original vehicle wiring, fuel pipes and brake pipes. www.novero.com/declaration_of_conformity The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ford Motor Company is under license. Other trademarks and trade names are those of their respective owners. Keep antenna and power cables at least 100mm from any electronic modules and airbags. Note: Only fit antennas in the positions shown to the roof of your vehicle. 163 Appendices 1 2 3 E100566 Frequency Band Maximum output power Watt (Peak MHz RMS) Antenna Positions 1 – 30 50 W 1, 2, 3 30 – 54 50 W 1, 2, 3 68 – 87.5 50 W 1, 2, 3 142 – 176 50 W 1, 2, 3 380 – 512 50 W 1, 2, 3 806 – 940 10 W 1, 2, 3 1200 – 1400 10 W 1, 2, 3 1710 – 1885 10 W 1, 2, 3 1885 – 2025 10 W 1, 2, 3 Note: After the installation of RF transmitters, check for disturbances from and to all electrical equipment in the vehicle, both in the standby and transmit modes. Check all electrical equipment: • with the ignition ON • with the engine running • during a road test at various speeds. 164 Appendices Check that electromagnetic fields generated inside the vehicle cabin by the transmitter installed do not exceed applicable human exposure requirements. 165 166 Index A Audio unit commands................................152 Auxiliary input......................................................156 CD Player................................................................152 Radio.......................................................................153 SD Card..................................................................156 A/C See: Climate Control...........................................62 About This Manual...........................................5 ABS Audio unit menus.........................................139 Audio unit operation....................................135 Audio unit overview.......................................131 Auto-Dimming Mirror...................................48 Autolamps........................................................38 Automatic volume control........................139 Autostore control..........................................137 Autowipers........................................................33 Auxiliary Heater..............................................66 See: Brakes.............................................................86 ABS driving hints See: Hints on Driving With Anti-Lock Brakes..................................................................86 Accessories See: Parts and Accessories.................................6 Adjusting the Steering Wheel...................30 Air Conditioning General information............................................66 Principle of operation.........................................66 See: Climate Control...........................................62 Air Vents............................................................62 Alarm..................................................................29 Auxiliary input (AUX IN) socket................79 Auxiliary Power Points..................................77 Principle of Operation........................................29 Alternative frequencies..............................139 Appendices.....................................................163 Arming the alarm...........................................29 Arming the engine immobiliser................28 At a Glance..........................................................7 B Balance/fade control..................................135 Bass/treble control......................................135 Bluetooth setup............................................146 Adjusting the steering wheel............................10 Engine idle speed after starting.......................10 Instrument panel overview..................................7 Locking and unlocking the doors with the key...........................................................................9 Locking and unlocking the doors with the remote control....................................................9 Handling of phones...........................................146 Requirements for Bluetooth connection.......................................................146 Bonnet Lock See: Opening and Closing the Bonnet.......105 Booster cables See: Jump-Starting the Vehicle.....................114 Audible Warnings and Indicators.............53 Booster Seats...................................................12 Door open................................................................53 Frost..........................................................................54 Lights on..................................................................54 Low fuel...................................................................54 Booster cushion (Group 3)................................13 Booster seat (Group 2).......................................12 Brake and Clutch Fluid Check.................109 Brakes................................................................86 Audio Control..................................................30 Principle of Operation........................................86 Mode..........................................................................31 Seek............................................................................31 Volume.....................................................................30 Bulb changing See: Changing a Bulb..........................................41 Bulb Specification Chart.............................46 Audio distortion reduction (CLIP)..........139 Audio introduction.......................................130 Audio menu control.....................................135 Audio system security.................................133 Audio troubleshooting................................144 Audio unit clock and date displays........134 C Capacities and Specifications.................124 Technical Specifications..................................124 Cargo Nets........................................................92 Car Wash See: Cleaning the Exterior.................................112 167 Index Compact disc track compression...........141 Compact disc track scanning...................141 Convenience features....................................77 Coolant Check Catalytic Converter........................................82 Driving with a catalytic converter...................82 Changing a Bulb..............................................41 Central high mounted brake lamp................44 Front fog lamps.....................................................43 Headlamp................................................................41 Interior lamp...........................................................45 Number plate lamp.............................................45 Reading lamps......................................................45 Rear lamps.............................................................44 Side repeaters.......................................................43 See: Engine Coolant Check............................109 Cup Holders......................................................78 Seat back trays......................................................78 D Diesel Particulate Filter.................................81 Changing a Fuse.............................................98 Changing a Road Wheel.............................115 Regeneration...........................................................81 Direction Indicators.......................................40 Disabling the passenger airbag................20 Installing a road wheel......................................118 Jacking and lifting points..................................116 Locking wheel nuts.............................................115 Removing a road wheel.....................................117 Spare wheel...........................................................117 Stowing the wheel..............................................119 Vehicle jack............................................................115 Disabling the passenger airbag......................20 Enabling the passenger airbag.......................20 Disarming the alarm.....................................29 Disarming the engine immobiliser...........28 DPF See: Diesel Particulate Filter.............................81 Changing the remote control battery..............................................................21 Changing the Wiper Blades........................35 Checking the Wiper Blades........................35 Child Safety........................................................11 Child Safety Locks..........................................15 Driving Hints.....................................................95 E Child Seat Positioning...................................13 Child Seats..........................................................11 Ejecting compact discs..............................142 Electric exterior mirrors................................47 Electromagnetic compatibility................163 Ending compact disc playback...............142 Engine Coolant Check................................109 Child restraints for different mass groups....................................................................11 Checking the coolant level.............................109 Topping up............................................................109 Cigar Lighter......................................................77 Cleaning the Exterior....................................112 Engine immobiliser........................................28 Body paintwork preservation..........................112 Cleaning the chrome trim.................................112 Cleaning the headlamps...................................112 Cleaning the rear window.................................112 Engine Oil Check..........................................108 Tourneo Connect...................................................15 Principle of Operation........................................28 Checking the oil level........................................108 Topping up............................................................108 Engine Oil Dipstick - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel...............................................108 Entering a security code.............................133 Exterior Mirrors.................................................47 Cleaning the Interior.....................................112 Instrument cluster screens, LCD screens, radio screens.....................................................113 Rear windows........................................................113 Seat belts................................................................112 Manual folding mirrors.......................................47 Climate Control...............................................62 F Principle of Operation........................................62 Coded keys.......................................................28 Cold Weather Precautions.........................95 Compact disc playback...............................141 Compact disc player....................................141 Fastening the seat belts...............................18 Rear seat belts.......................................................19 Fast forward/reverse....................................141 168 Index H First Aid Kit.......................................................96 Floor Mats.........................................................79 Fog Lamps - Front Handbrake See: Front Fog Lamps........................................38 See: Parking Brake...............................................86 Fog Lamps - Rear Hazard Warning Flashers............................39 Headlamp Levelling......................................39 See: Rear Fog Lamps..........................................38 Front Fog Lamps............................................38 Front Seats.......................................................70 All vehicles..............................................................39 Recommended headlamp levelling switch positions.............................................................39 Adjusting the angle of the seatback..............71 Adjusting the armrest..........................................72 Adjusting the height of the seat.......................71 Adjusting the lumbar support...........................71 Folding the front passenger seat....................72 Moving the seats backwards and forwards..............................................................70 Head Restraints...............................................73 Adjusting the head restraint.............................73 Removing the head restraint............................73 Heated Seats...................................................76 Heated Windows and Mirrors....................62 Heated exterior mirrors......................................63 Heated windows...................................................62 Fuel and Refuelling.......................................82 Technical Specifications...................................83 Heating Fuel Burning Heater See: Climate Control...........................................62 See: Auxiliary Heater..........................................66 Hill launch assist (HLA) Fuel Consumption.........................................83 Fuel Consumption See: Using hill start assist.................................89 Hill Start Assist...............................................89 See: Technical Specifications.........................83 Principle of Operation........................................89 Fuel filler flap...................................................83 Hints on Driving With Anti-Lock Brakes..............................................................86 HLA All vehicles..............................................................83 Tourneo Connect..................................................83 Fuel Quality - Diesel......................................82 See: Hill Start Assist...........................................89 See: Using hill start assist.................................89 Long-term storage...............................................82 Fuse Box Locations........................................97 I Central fuse box....................................................97 Engine compartment fuse box.......................97 Fuse Labels......................................................98 Fuses...................................................................97 Fuse Specification Chart............................99 Ignition Switch................................................80 Immobiliser Central fuse box.................................................100 Engine compartment fuse box.......................99 Important audio information...................130 See: Engine immobiliser....................................28 Audio unit labels.................................................130 Disc labels.............................................................130 G Incorrect security code...............................133 Information Displays.....................................55 Gauges...............................................................49 General Information............................................55 Engine coolant temperature gauge..............50 Fuel gauge................................................................51 Information Messages.................................59 Doors open.............................................................59 Hill start assist......................................................60 Lighting.....................................................................61 Maintenance...........................................................61 Message indicator................................................59 Stability control (ESP)........................................61 Gearbox See: Transmission................................................85 General Information on Radio Frequencies....................................................21 Instrument Cluster........................................49 Instrument Lighting Dimmer......................77 169 Index Interior Lamps.................................................40 Locking and Unlocking.................................23 Reading lamps.......................................................41 Automatic relocking............................................24 Central locking.......................................................23 Double locking.......................................................23 Double locking the doors with the key.........23 Locking and unlocking confirmation.............23 Locking and unlocking the doors from inside....................................................................25 Locking and unlocking the doors with the remote control..................................................24 Locking and unlocking the luggage compartment lid..............................................23 Locking the doors with the key........................23 One-stage unlocking...........................................24 Opening the doors...............................................25 Sliding door memory locking...........................24 Two-stage unlocking..........................................24 Unlocking the doors with the key...................23 Introduction........................................................5 ISOFIX Anchor Points....................................15 Tourneo Connect...................................................15 J Jump starting See: Jump-Starting the Vehicle.....................114 Jump-Starting the Vehicle.........................114 To connect the booster cables.......................114 To start the engine..............................................114 K Keys and Remote Controls..........................21 L Locks...................................................................23 Lost security code.........................................133 Lighting Control...............................................37 M Headlamp flasher.................................................37 Home safe lighting...............................................37 Lighting control positions..................................37 Main and dipped beam......................................37 Parking lamps........................................................37 Maintenance..................................................105 General Information..........................................105 Technical Specifications...................................110 Lighting...............................................................37 Load apportioning valve (LAV) plate................................................................123 Load Carriers Manual Climate Control..............................63 Air conditioning.....................................................65 Air distribution control.......................................63 Blower.......................................................................63 Defrosting and demisting the windscreen........................................................64 Rapid heating of vehicle interior....................64 Recirculated air.....................................................64 Temperature control...........................................63 Ventilation..............................................................64 See: Roof Racks and Load Carriers...............92 Load Carrying...................................................92 General Information............................................92 Loading compact discs...............................141 Manual Transmission...................................85 Selecting reverse gear........................................85 Map Pockets....................................................78 Message Centre See: Information Displays.................................55 Mirrors See: Heated Windows and Mirrors................62 See: Windows and Mirrors................................47 N Navigation system commands...............162 170 Index Rear Window Wiper and Washers...........34 News broadcasts.........................................140 Intermittent wipe.................................................34 Rear window washer...........................................35 Reverse gear wipe................................................34 O Refuelling..........................................................83 Regional mode (REG)................................140 Remote control battery Occupant protection......................................17 Principle of Operation..........................................17 Oil Check See: Engine Oil Check.......................................108 See: Changing the remote control battery..................................................................21 On/off control................................................135 Opening and Closing the Bonnet...........105 Remote control programming Closing the bonnet............................................106 Opening the bonnet..........................................105 See: Programming the remote control.........21 Repairing Minor Paint Damage.................113 Repeat compact disc tracks.....................142 Roadside Emergencies................................96 Roof Racks and Load Carriers...................92 P Parking Aids......................................................91 Roof rack.................................................................92 Principle of Operation.........................................91 Running-In........................................................95 Parking Brake..................................................86 Brakes and clutch................................................95 Engine.......................................................................95 Tyres..........................................................................95 Applying the parking brake..............................86 Parking on a hill....................................................86 Releasing the parking brake............................86 S Parts and Accessories....................................6 Personalised Settings..................................58 Safety Precautions........................................82 Seat belt height adjustment.......................19 Seat belt reminder..........................................19 Clock setting..........................................................58 ESP............................................................................58 Vehicle settings.....................................................59 Power Door Locks Deactivating the seat belt reminder..............19 Seat belts See: Locking and Unlocking.............................23 Power Steering Fluid Check......................110 See: Fastening the seat belts...........................18 Topping up.............................................................110 Seats...................................................................70 Security code..................................................133 Setting the clock and date on the audio unit..................................................................134 Power Windows..............................................47 To open the driver’s window automatically....................................................47 Programming the remote control.............21 12/24 hour format...............................................134 Changing the date and time...........................134 Programming a new remote control..............21 Reprogramming the unlocking function................................................................21 Shuffle/random.............................................141 Sitting in the Correct Position....................70 Snow Chains R See: Using Snow Chains..................................120 Stability Control..............................................87 Rear Fog Lamps..............................................38 Rear Quarter Windows................................48 Rear Seats.........................................................73 Principle of Operation.........................................87 Starter Switch See: Ignition Switch............................................80 Starting a Diesel Engine..............................80 Folding a single seatback forwards...............74 Folding the entire seat forwards.....................74 Returning the seat to the upright position................................................................75 Cold or hot engine...............................................80 Starting and Stopping the Engine...........80 General Information...........................................80 Station preset buttons................................137 171 Index Station tuning control.................................138 Traction Control.............................................88 Manual tuning......................................................138 Scan tuning...........................................................138 Seek tuning...........................................................138 Traffic information control........................137 Principle of Operation........................................88 Activating traffic announcements................137 Ending traffic announcements.....................138 Local or distant traffic......................................138 To adjust the preset volume...........................138 Traffic announcement volume......................138 Steering Wheel...............................................30 Storage compartments...............................78 Overhead storage compartment...................78 Seat storage...........................................................78 Transmission...................................................85 Trip Computer..................................................57 Switching Off the Engine............................80 Vehicles with a turbocharger..........................80 Symbols Glossary.............................................5 Average fuel consumption...............................58 Average speed.......................................................58 Distance to empty...............................................58 Menu.........................................................................58 Odometer................................................................57 Outside air temperature....................................58 Tripmeter.................................................................57 Type 1 information display.................................57 Type 2 information display................................57 Symbols in this handbook...................................5 Symbols on your vehicle......................................5 T Technical Specifications See: Capacities and Specifications.............124 Telephone commands...............................158 Type approvals..............................................163 Create a phonebook.........................................160 Main settings........................................................162 Phone......................................................................158 Phone functions..................................................158 FCC/INDUSTRY CANADA NOTICE..............163 RX-42 - declaration of conformity...............163 Tyre Care...........................................................119 Tyre Pressures Telephone controls......................................146 Remote control...................................................146 See: Technical Specifications........................120 Telephone setup...........................................145 Tyres Bond another Bluetooth phone....................146 Making a phone an active phone.................145 Phonebook............................................................145 Phonebook categories......................................145 See: Wheels and Tyres......................................115 U Telephone........................................................145 Under Bonnet Overview - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel................107 Using hill start assist....................................89 General Information..........................................145 Telephone See: Using the telephone - Vehicles With: Navigation System........................................148 See: Using the telephone - Vehicles Without: Navigation System.........................................147 Activating the system........................................89 Deactivating the system...................................89 Disabling the system..........................................90 Using seat belts during pregnancy...........19 Using Snow Chains......................................120 Using Stability Control.................................87 Using the Parking Aid....................................91 Towing a Trailer...............................................94 Steep gradients....................................................94 Towing Points................................................103 Front towing eye.................................................103 Rear towing eye...................................................103 Tourneo Connect................................................103 Transit Connect...................................................103 Towing the Vehicle on Four Wheels..........................................................103 Towing................................................................94 Track selection................................................141 172 Index W Using the telephone - Vehicles With: Navigation System....................................148 Changing the active phone.............................149 Debonding a bonded phone..........................150 Making a call........................................................149 Muting the microphone...................................149 Receiving an incoming call.............................149 Receiving a second incoming call................149 Warning Lamps and Indicators..................51 ABS warning lamp................................................51 Airbag warning lamp............................................51 Brake system warning lamp..............................51 Direction indicator.................................................51 Door open warning lamp....................................51 Engine warning lamps........................................52 Front fog lamp indicator....................................52 Glow plug indicator..............................................52 Headlamp indicator.............................................52 Ignition warning lamp.........................................52 Low fuel level warning lamp............................52 Main beam indicator...........................................52 Message indicator................................................52 Oil pressure warning lamp................................53 Rear fog lamp indicator......................................53 Seat belt reminder...............................................53 Service interval indicator...................................53 Shift indicator........................................................53 Stability control (ESP) and traction control warning lamp....................................................53 Water-in-fuel indicator.......................................53 Using the telephone - Vehicles Without: Navigation System....................................147 Changing the active phone.............................148 Debonding a bonded phone..........................148 Making a call.........................................................147 Muting the microphone...................................148 Receiving an incoming call..............................147 Receiving a second incoming call.................147 Using Traction Control.................................88 Using voice control........................................151 Name tag...............................................................152 System operation................................................151 Using Winter Tyres.......................................120 V Vehicle battery................................................114 Vehicle care......................................................112 Vehicle Identification Number.................123 Vehicle Identification Plate.......................123 Vehicle identification...................................123 Vehicle recovery............................................103 Ventilation Warning Triangle............................................96 Washer Fluid Check......................................110 Washers See: Wipers and Washers.................................33 Washing See: Cleaning the Exterior.................................112 Waveband button.........................................137 Wheels and Tyres..........................................115 See: Climate Control...........................................62 Vents General Information...........................................115 Technical Specifications..................................120 See: Air Vents.........................................................62 VIN Windows and Mirrors....................................47 Windscreen Washers....................................34 Windscreen Wipers.......................................33 See: Vehicle Identification Number.............123 Voice control....................................................151 Principle of Operation........................................151 Intermittent wipe..................................................33 Voice Control.....................................................31 Winter Tyres See: Using Winter Tyres...................................120 Wipers and Washers.....................................33 173 174 CG3526en