Ford - Galaxy - Owners Manual - 2009 - 2009

FordGalaxy FordS-MAX Owner's handbook Feel the difference The information contained in this publication was correct at the time of going to print. In the interest of development the right is reserved to change specifications, design or equipment at any time without notice and without incurring any obligations. This publication, or part thereof, may not be reproduced nor translated without our approval. Errors and omissions excepted. © Ford Motor Company 2009 All rights reserved. Part number: AM2J-19A321-DA (CG3533en) 08/2009 20090903092354 E108837 Table of contents Introduction Alarm About this handbook................................7 Symbols glossary.......................................7 Parts and accessories..............................7 Principle of operation..............................42 Arming the alarm.....................................44 Disarming the alarm................................44 Quick start Steering wheel Quick start..................................................11 Adjusting the steering wheel.................45 Audio control...........................................45 Child safety Wipers and washers Child seats................................................20 Booster cushions.....................................21 Child seat positioning.............................22 ISOFIX anchor points..............................25 Child safety locks....................................26 Windscreen wipers.................................47 Autowipers...............................................47 Windscreen washers.............................48 Adjusting the windscreen washer jets.........................................................48 Rear window wiper and washers.........48 Headlamp washers................................49 Checking the wiper blades...................49 Changing the wiper blades...................49 Technical specifications..........................51 Occupant protection Principle of operation..............................27 Fastening the seat belts........................29 Seat belt height adjustment..................30 Seat belt reminder...................................31 Using seat belts during pregnancy.......31 Disabling the passenger airbag.............31 Lighting Lighting control........................................52 Autolamps................................................53 Front fog lamps.......................................53 Rear fog lamps........................................53 Adjusting the headlamps - Vehicles With: Adaptive Front Lighting/Xenon Headlamps...........................................54 Headlamp levelling..................................54 Hazard warning flashers........................55 Adaptive front lighting system (AFS)......................................................55 Direction indicators.................................57 Interior lamps...........................................57 Removing a headlamp...........................58 Changing a bulb......................................59 Bulb specification chart..........................69 Keys and remote controls General information on radio frequencies..........................................33 Programming the remote control........33 Changing the remote control battery...................................................33 Locks Locking and unlocking...........................37 Global opening and closing...................39 Engine immobiliser Principle of operation..............................41 Coded keys..............................................41 Arming the engine immobiliser..............41 Disarming the engine immobiliser.........41 1 Table of contents Clock.......................................................128 Cigar lighter............................................129 Ashtray....................................................129 Auxiliary power sockets.......................129 Cup holders............................................130 Glove box...............................................130 Storage compartments........................131 Map pockets..........................................133 Seat back trays......................................133 Glasses holder.......................................134 Memory function...................................134 Childminder mirror.................................135 CD changer............................................135 Auxiliary input (AUX IN) socket............135 USB port.................................................136 Windows and mirrors Electric windows......................................71 Exterior mirrors........................................73 Electric exterior mirrors..........................73 Auto-dimming mirror..............................75 Rear quarter windows............................75 Instruments Gauges......................................................77 Warning lamps and indicators...............79 Audible warnings and indicators...........81 Information displays General information................................82 Trip computer...........................................91 Personalised settings.............................93 Information messages...........................95 Starting the engine General information...............................137 Ignition switch.........................................137 Steering wheel lock...............................137 Starting a petrol engine........................137 Starting a petrol engine - E85.............138 Starting a diesel engine........................139 Diesel particulate filter (DPF)................140 Switching off the engine.......................140 Engine heater.........................................140 Climate control Principle of operation............................104 Air vents..................................................104 Manual climate control.........................105 Automatic climate control....................108 Heated windows and mirrors...............112 Auxiliary heater.......................................113 Seats Fuel and refuelling Sitting in the correct position................118 Manual seats...........................................118 Electric seats...........................................119 Head restraints.......................................121 Rear seats...............................................121 Heated seats..........................................126 Ventilated seats.....................................126 Front seat armrest.................................127 Safety precautions.................................141 Fuel quality - Petrol.................................141 Fuel quality - E85....................................141 Fuel quality - Diesel................................141 Catalytic converter................................142 Fuel filler flap...........................................142 Refuelling................................................143 Refuelling - E85......................................143 Fuel consumption..................................143 Technical specifications........................143 Convenience features Sun blinds...............................................128 Instrument lighting dimmer..................128 2 Table of contents Sliding loadspace floor...........................171 Rear under floor storage......................172 Cargo nets..............................................173 Luggage covers.....................................176 Roof racks and load carriers................176 Load retaining fixtures...........................177 Dog guard...............................................180 Transmission Manual transmission.............................146 Automatic transmission........................146 Brakes Principle of operation............................149 Hints on driving with ABS.....................149 Parking brake.........................................149 Electric parking brake (EPB)................150 Towing Towing a trailer.......................................183 Detachable tow ball..............................183 Retractable tow ball..............................186 Stability control Principle of operation............................153 Using stability control............................153 Driving hints Hill start assist Principle of operation............................154 Using hill start assist..............................154 Running-in..............................................190 Cold weather precautions...................190 Driving through water...........................190 Active suspension Emergency equipment Principle of operation............................157 Using active suspension.......................157 First aid kit................................................191 Warning triangle......................................191 Parking aid Fuses Principle of operation............................158 Using the parking aid............................158 Fuse box locations................................192 Changing a fuse....................................193 Fuse specification chart.......................194 Cruise control Vehicle recovery Principle of operation............................160 Using cruise control..............................160 Towing points........................................203 Towing the vehicle on four wheels.....203 Adaptive cruise control (ACC) Maintenance General information..............................205 Opening and closing the bonnet.......206 Engine compartment overview - 2.0L Duratec-HE (MI4)..............................207 Engine compartment overview - 2.3L Duratec-HE (MI4)..............................208 Engine compartment overview - 2.5L Duratec (VI5)......................................209 Principle of operation............................162 Using ACC..............................................163 Forward alert function..........................166 Load carrying General information..............................168 Luggage anchor points........................169 3 Table of contents Engine compartment overview - 1.8L Duratorq-TDCi (Lynx) Diesel............210 Engine compartment overview - 2.0L Duratorq-TDCi (DW) Diesel...............211 Engine compartment overview - 2.2L Duratorq-TDCi (DW) Diesel..............212 Engine oil dipstick - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4)...........213 Engine oil dipstick - 2.5L Duratec (VI5)......................................................213 Engine oil dipstick - 1.8L Duratorq-TDCi (Lynx) Diesel........................................213 Engine oil dipstick - 2.0L Duratorq-TDCi (DW) Diesel/2.2L Duratorq-TDCi (DW) Diesel...................................................213 Engine oil check.....................................214 Engine coolant check...........................214 Brake and clutch fluid check...............215 Power steering fluid check..................215 Washer fluid check................................215 Technical specifications........................216 Vehicle identification Vehicle identification plate...................235 Vehicle identification number (VIN).....235 Technical specifications Technical specifications.......................236 Telephone General information..............................242 Bluetooth setup....................................242 Telephone setup...................................242 Telephone controls..............................243 Using the telephone - Vehicles Without: Navigation System............................244 Using the telephone - Vehicles With: Navigation System............................246 Voice control Cleaning the exterior............................218 Cleaning the interior..............................218 Repairing minor paint damage............219 Principle of operation...........................249 Using voice control...............................249 Audio unit commands.........................250 Telephone commands.........................261 Navigation system commands..........265 Climate control commands................265 Vehicle battery Connectivity Using booster cables...........................220 Battery connection points...................221 General information..............................268 Connecting an external device..........269 Connecting an external device Vehicles With: Bluetooth..................269 Using a USB device..............................270 Using an iPod.........................................272 Vehicle care Wheels and tyres General information..............................222 Changing a road wheel.......................222 Tyre repair kit.........................................225 Run flat tyres..........................................229 Tyre care................................................230 Using winter tyres.................................230 Using snow chains...............................230 Tyre pressure monitoring system.......231 Technical specifications.......................232 Navigation introduction Road Safety...........................................276 Navigation system Getting started......................................277 4 Table of contents Appendices Type approvals......................................279 Type approvals......................................279 Type approvals......................................279 Electromagnetic compatibility............280 5 6 Introduction ABOUT THIS HANDBOOK SYMBOLS GLOSSARY Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this handbook. The more that you know about it, the greater the safety and pleasure you will get from driving it. Symbols in this handbook WARNING You risk death or serious injury to yourself and others if you do not follow the instructions highlighted by the warning symbol. Note: This handbook describes product features and options available throughout the range, sometimes even before they are generally available. It may describe options not fitted to your vehicle. CAUTION You risk damaging your vehicle if you do not follow the instructions highlighted by the caution symbol. Note: Some of the illustrations in this handbook may be used for different models, so may appear different to your vehicle. However, the essential information in the illustrations is always correct. Symbols on your vehicle Note: Always use and operate your vehicle in line with all applicable laws and regulations. Note: Pass on this handbook when selling your vehicle. It is an integral part of the vehicle. When you see these symbols, read and follow the relevant instructions in this handbook before touching or attempting adjustment of any kind. This vehicle has received the endorsement of TÜV, the accredited international testing organisation, for its allergy-friendly properties. PARTS AND ACCESSORIES All materials used in the manufacture of the interior of this vehicle meet strict requirements of the TÜV TOXPROOF Criteria Catalogue for Vehicle Interiors by TÜV Produkt and Umwelt GmbH and are designed to minimize the risk of allergic reactions. Now you can be sure that your Ford parts are Ford parts Your Ford has been built to the highest standards using high quality Ford Original Parts. As a result, you can enjoy driving it for many years. Additionally an efficient pollen filter protects the passengers against allergen particles in the outdoor air. Should the unexpected occur and a major part needs replacing, we recommend that you accept nothing less than Ford Original Parts. For more information, contact TÜV at www.tuv.com. 7 Introduction The use of Ford Original Parts ensures that your vehicle is repaired to its pre-accident condition and maintains its maximum residual value. Ford Original Parts match Ford's stringent safety requirements and high standards of fit, finish and reliability. Quite simply, they represent the best overall repair value, including parts and labour costs. Now it is easier to tell if you have really been given Ford Original Parts. The Ford logo is clearly visible on the following parts if they are Ford Original Parts. If your vehicle has to be repaired, look for the clearly visible Ford branding and make sure that only Ford Original Parts have been used. Look for the Ford logo on the following parts Sheet metal • • • • E94714 Wing Bonnet Doors Luggage compartment lid or tailgate Bumper and radiator grille • • Radiator grille Front and rear bumper E94715 8 Introduction Exterior mirror E94717 E94716 Lighting Glass • • • • • • Rear window Glass roof Side glass Windscreen 9 Rear lamps Headlamp Introduction E94718 10 Quick start QUICK START Instrument panel overview - left-hand drive A B C D E W V U T F S G R E74123 11 H Q I J K P L M O N Quick start Instrument panel overview - right-hand drive M I J P K L N O H V C D U T E S F R G Q B A W E75798 A Lighting controls. See Lighting control (page 52). B Air vents. See Air vents (page 104). C Direction indicators. See Direction indicators (page 57). Telephone control buttons. See Telephone controls (page 243). Voice control buttons. See Using voice control (page 249). D Audio controls. See Audio control (page 45). E Instrument cluster. See Gauges (page 77). F Information display controls. See Information displays (page 82). 12 Quick start G Wiper lever. See Windscreen wipers (page 47). H Audio or navigation unit. See separate handbook. I Stability control (ESP) switch. See Using stability control (page 153). J Parking aid switch. See Using the parking aid (page 158). K Hazard warning flasher switch. See Hazard warning flashers (page 55). L Passenger airbag deactivation warning lamp. See Disabling the passenger airbag (page 31). M Storage compartment. See Storage compartments (page 131). N Heated windscreen and heated rear window switches. See Heated windows and mirrors (page 112). O Climate controls. See Manual climate control (page 105). See Automatic climate control (page 108). P Cigar lighter. See Cigar lighter (page 129). Q Ignition switch. R Cruise control switches. See Using cruise control (page 160). Adaptive cruise control (ACC) switches. See Using ACC (page 163). S Steering wheel adjustment lever. See Adjusting the steering wheel (page 45). T Driver Knee airbag. See Principle of operation (page 27). U Horn. V Cruise control switches. See Using cruise control (page 160). Adaptive cruise control (ACC) switches. See Using ACC (page 163). W Storage compartment. See Storage compartments (page 131). Adjusting the steering wheel 2 WARNING Never adjust the steering wheel when the vehicle is moving. 2 1 E95178 13 Quick start A B E70316 3 E95179 See Adjusting the steering wheel (page 45). A High sensitivity B Low sensitivity See Autowipers (page 47). Changing the wiper blades Autowipers CAUTION D You can use the service position in winter to provide easier access to the wiper blades for freeing them from snow and ice. The windscreen wipers will return to their normal position as soon as you switch on the ignition so make sure that you fully defrost the windscreen before you switch on the ignition. C B A E70696 A Single wipe B Autowipers C Normal wipe D High speed wipe E75184 14 Quick start Direction indicators A E75188 E70727 Switch off the ignition and move the wiper lever to position A within three seconds. Release the lever when the windscreen wipers have moved to the service position. Note: Tap the lever up or down to make the direction indicators flash only three times. Electric folding mirrors See Changing the wiper blades (page 49). Autolamps E70719 The headlamps will come on and go off automatically depending on the ambient light. E72623 See Electric exterior mirrors (page 73). See Lighting control (page 52). 15 Quick start Reverse mirror dipping Rear seat air vents Depending on the selected mirror position, the relevant exterior mirror will dip whenever you select reverse gear, giving you a view of the kerb. When you first use this feature, the mirrors will dip to a preset position. You can programme the degree of dipping. C See Electric exterior mirrors (page 73). Information displays A B E70499 Use the arrow buttons to navigate through the menus and press OK to make a selection. See Information displays (page 82). E73131 A Air flow through lower air vent B Air flow through upper air vent C Upper air vent Select position B to defrost or demist the rear side windows. 16 Quick start Manual climate control Automatic climate control Heating the interior quickly E70304 See Automatic climate control (page 108). E71377 Memory function Cooling the interior quickly WARNING Do not use the memory store function when the vehicle is moving. A E71381 Defrosting and demisting the windscreen B E86768 A Seat adjustment controls B Memory pre-set buttons 1. Turn the ignition on. 2. Adjust the seat and exterior mirrors to the desired position. 3. Press and hold the desired pre-set button B until a single chime sounds to confirm. E71382 See Manual climate control (page 105). See Memory function (page 134). 17 Quick start Engine idle speed after starting Automatic transmission The engine may idle at a higher speed than normal immediately after starting from cold. Selector lever positions See Starting the engine (page 137). Diesel particulate filter (DPF) WARNING S Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The DPF regeneration process creates very high exhaust gas temperatures and the exhaust will radiate a considerable amount of heat during and after DPF regeneration, and after you have switched the engine off. This is a potential fire hazard. E80836 See Diesel particulate filter (DPF) (page 140). Manual transmission A Park B Reverse C Neutral D Drive S Manual shifting and sport mode WARNING Selecting reverse gear Apply the brakes before moving the selector lever and keep them applied until you are ready to move off. See Automatic transmission (page 146). E99067 On some vehicles it is necessary to raise the collar whilst selecting reverse gear. See Manual transmission (page 146). 18 Quick start Electric parking brake (EPB) See Electric parking brake (EPB) (page 150). Applying the EPB E70528 Releasing the EPB manually Note: To release the EPB, the ignition must be in position II. E70529 Hold the brake pedal depressed and press down the switch. Automatic release - Drive away release (DAR) Engage first or reverse gear, move off as normal, the EPB will be released automatically. 19 Child safety Only child restraints certified to ECE-R44.03 (or later) have been tested and approved for use in your vehicle. A choice of these are available from your Dealer. CHILD SEATS Child restraints for different mass groups Use the correct child restraint as follows: Baby safety seat E68916 WARNINGS Secure children that are less than 150 centimetres tall or less than 12 years of age in a suitable, approved child restraint, in the rear seat. Original text according to ECE R94.01: Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an air bag in front of it! E68918 Secure children that weigh less than 13 kilograms in a rearward facing baby safety seat (Group 0+) in the rear seat. Read and follow the manufacturer’s instructions when you are fitting a child restraint. Do not modify child restraints in any way. Do not hold a child on your lap when the vehicle is moving. Do not leave unattended children in your vehicle. If your vehicle has been involved in an accident, have the child restraints checked by properly trained technicians. Note: Mandatory use of child restraints varies from country to country. 20 Child safety Child safety seat CAUTION When using a child seat on a rear seat, make sure that the child seat rests tightly against the vehicle seat. It may be necessary to lift or remove the head restraint. See Head restraints (page 121). Booster seat (Group 2) E68920 Secure children that weigh between 13 and 18 kilograms in a child safety seat (Group 1) in the rear seat. BOOSTER CUSHIONS WARNINGS Do not install a booster seat or a booster cushion with only the lap strap of the seat belt. E70710 We recommend that you use a booster seat that combines a cushion with a backrest instead of a booster cushion only. The raised seating position will allow you to position the shoulder strap of the adult seat belt over the centre of your child’s shoulder and the lap strap tightly across its hips. Do not install a booster seat or a booster cushion with a seat belt that is slack or twisted. Do not put the seat belt under your child’s arm or behind its back. Do not use pillows, books or towels to boost your child’s height. Make sure that your children sit in an upright position. Secure children that weigh more than 15 kilograms but are less than 150 centimetres tall in a booster seat or a booster cushion. 21 Child safety Booster cushion (Group 3) CHILD SEAT POSITIONING WARNINGS When you are using a child restraint with a support leg on a second row seat, make sure that you locate the support leg securely on the under floor storage compartment lid. Make sure that you install the foam spacer correctly inside the storage compartment and that you position the lid correctly. When using a forward facing child seat on a second or third row seat, always remove the head restraint from that seat. E68924 When fitting a child seat using the vehicle seat belts make sure the belts are not slack. Note: When using a child seat on a second row seat, adjust the second row seat to the most practical position for the driver. Child seat positions Mass group categories Seating positions 0 0+ I Up to 10 kg Up to 13 kg 9 - 18 kg 15 - 25 kg 22 - 36 kg Child safety seat Booster seat or cushion Baby safety seat II III Front passenger seat with airbag ON X X UF¹ UF¹ UF¹ Front passenger seat with airbag OFF U¹ U¹ U¹ U¹ U¹ Second row seats U U U U U Third row Galaxy U U U U U 22 Child safety Mass group categories Seating positions 0 0+ I Up to 10 kg Up to 13 kg 9 - 18 kg 15 - 25 kg 22 - 36 kg Child safety seat Booster seat or cushion Baby safety seat Third row S-MAX L, UF L, UF II UF III UF UF X Not suitable for children in this mass group. U Suitable for universal category child restraints approved for use in this mass group. U¹ Suitable for universal category child restraints approved for use in this mass group. However, we recommend that you secure children in a government approved child restraint, in the rear seat. L Suitable only for the following rearward facing child restraints: Roemer Baby-Safe (E1-04301146), Roemer Baby-Safe Plus (E1-04301146), Britax Cosy Tot (E1-04301146), Britax Cosy Tot Premium (E1-04301146), Maxi-Cosi Cabrio (E4-44R-043517). UF Suitable for universal category forward facing child restraints approved for use in this mass group. UF¹ Suitable for universal category forward facing child restraints approved for use in this mass group. However, we recommend that you secure children in a government approved child restraint, in the rear seat. ISOFIX child restraints Mass group categories Seating positions 0 0+ I Up to 10 kg Up to 13 kg 9 - 18 kg Baby safety seat Child safety seat Second row seat ISOFIX restraints IU IU IU * E C, D, E A, B, B1, C, D Second row seat ISOFIX classes IU Suitable for universal category ISOFIX child restraints approved for use in this mass group. * As defined by ECE-R16. 23 Child safety Note: When you are purchasing an ISOFIX restraint, make sure that you know the correct mass group and ISOFIX size class for the intended seating locations. 24 Child safety Attaching a child seat with top tethers ISOFIX ANCHOR POINTS WARNING WARNING Use an anti-rotation device when using the ISOFIX system. We recommend the use of a top tether or support leg. Do not attach a tether strap to anything other than the correct tether anchor point. Note: Where applicable, remove the luggage cover to ease installation. See Luggage covers (page 176). Note: When you are purchasing an ISOFIX restraint, make sure that you know the correct mass group and ISOFIX size class for the intended seating locations. See Child seat positioning (page 22). 1. Your vehicle is fitted with ISOFIX anchor points that accommodate universally approved ISOFIX child restraints. Remove the head restraint. See Head restraints (page 121). WARNING Make sure that the top tether strap is not slack or twisted and is properly located on the anchor point. The ISOFIX system comprises two rigid attachment arms on the child restraint that attach to anchor points on the outboard rear seats, where the cushion and backrest meet. Tether anchor points are fitted behind the outboard rear seats for child restraints with a top tether. 2. Route the tether strap to the anchor point. Top tether anchor points E75531 3. Push the child seat back firmly to engage the ISOFIX lower anchor points. 4. Tighten the tether strap in line with the child seat manufacturer's instructions. E75532 25 Child safety CHILD SAFETY LOCKS WARNING You cannot open the doors from inside if you have put the child safety locks on. E112197 Left-hand side Turn anti-clockwise to lock and clockwise to unlock. Right-hand side Turn clockwise to lock and anti-clockwise to unlock. 26 Occupant protection Driver and front passenger airbags PRINCIPLE OF OPERATION Airbags WARNINGS Do not modify the front of your vehicle in any way. This could adversely affect deployment of the airbags. Original text according to ECE R94.01: Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of it! E74302 Wear a seat belt and keep sufficient distance between yourself and the steering wheel. Only when you use the seat belt properly, can it hold you in a position that allows the airbag to achieve its optimum effect. See Sitting in the correct position (page 118). The driver and front passenger airbags will deploy during significant frontal collisions or collisions that are up to 30 degrees from the left or the right. The airbags will inflate within a few thousandths of a second and deflate on contact with the occupants, thus cushioning forward body movement. During minor frontal collisions, overturns, rear collisions and side collisions, the driver and front passenger airbags will not deploy. Have repairs to the steering wheel, steering column, seats, airbags and seat belts carried out by a properly trained technician. Keep the areas in front of the airbags free from obstruction. Do not affix anything to or over the airbag covers. Driver knee airbag CAUTION Do not poke sharp objects into areas where airbags are fitted. This could damage and adversely affect deployment of the airbags. Do not attempt to open the driver knee airbag cover. The driver knee airbag will deploy during frontal collisions or collisions that are up to 30 degrees from the left or the right. The airbag will inflate within a few thousandths of a second and deflate on contact with the occupants, thus providing a cushion between the driver’s knees and the steering column. During overturns, rear collisions and side collisions, the knee airbag will not deploy. Use seat covers designed for seats with side airbags. Have these fitted by a properly trained technician. Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys. This is normal. Note: Only wipe airbag covers with a damp cloth. For item location: See Quick start (page 11). 27 Occupant protection Note: The knee airbag has a lower deployment threshold than the front airbags. During a minor collision, it is possible that only the knee airbag deploys. Curtain airbags Side airbags E75004 Curtain airbags are fitted inside the trim panels over the front and rear side windows. Moulded badges in the B-pillar trim panels indicate that curtain airbags are fitted to your vehicle. E72658 Side airbags are fitted inside the seatback of the front seats. A label indicates that side airbags are fitted to your vehicle. The curtain airbags will deploy during significant lateral collisions. The airbag will inflate within a few thousandths of a second and deflate on contact with the occupants, thus providing protection for the head. During minor lateral collisions, front collisions, rear collisions, or overturns the curtain airbags will not deploy. The side airbags will deploy during significant lateral collisions. The airbags will inflate within a few thousandths of a second and deflate on contact with the occupants, thus providing protection for the chest and shoulder areas. During minor lateral collisions, overturns, front collisions and rear collisions, the side airbags will not deploy. Seat belts WARNINGS Wear a seat belt and keep sufficient distance between yourself and the steering wheel. Only when you use the seat belt properly, can it hold you in a position to achieve its optimum effect. See Sitting in the correct position (page 118). Never use a seat belt for more than one person. Use the correct buckle for each seat belt. 28 Occupant protection WARNINGS Do not use a seat belt that is slack or twisted. Do not wear thick clothing. The seat belt must fit tightly around your body to achieve its optimum effect. Position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips. The driver and front passenger seat belt retractors are fitted with a seat belt pretensioner. Seat belt pretensioners have a lower deployment threshold than the airbags. During minor collisions, it is possible that only the seat belt pretensioners will deploy. E74124 Status after a collision WARNING Seat belts subjected to strain, as a result of an accident, should be renewed and the anchorages checked by a properly trained technician. FASTENING THE SEAT BELTS WARNING Insert the tongue into the buckle until you hear a distinct click. You have not fastened the seat belt properly if you do not hear a click. E74127 Pull the belt out steadily. It may lock if you pull it sharply or if the vehicle is on a slope. Note: The seat belt tongues are designed so that you can only insert them into the correct buckle. Press the red button on the buckle to release the belt. Let it retract completely and smoothly. 29 Occupant protection Second row centre seat belt 3 1 E74128 2 1. Press the button on the side of the black buckle to release the belt. Let it retract completely and smoothly to the retractor in the roof. 2. Insert the larger tongue into the pocket near the end of the seat belt. 3. Fold the smaller tongue back and insert it into the retaining slot (3). 3 E74125 SEAT BELT HEIGHT ADJUSTMENT The retractor for the rear centre seat belt is located in the roof. To fasten the seat belt: 1. Pull the belt out steadily. It may lock if you pull it sharply or if the vehicle is on a slope. 2. Insert the smaller tongue into the black buckle to the right of the centre seat (1). 3. Pull the larger tongue across the lap and insert it into the buckle to the left of the centre seat (2). 4. Press the red button on the left buckle to release the belt. Let it retract. Note: If in constant use, you can leave the belt buckled in the black buckle. When it is not in use, or when you fold or move the rear seats, you should release the belt from the black buckle. E73135 To raise the height, grasp the D-ring and move the pivot up. To lower the height, grasp the D-ring, hold the locking button on the height adjuster pressed and move the pivot down. Note: Lifting the slider slightly while pressing the locking button makes it easier to release the locking mechanism. 30 Occupant protection Position the lap strap comfortably across your hips and low beneath your pregnant abdomen. Position the shoulder strap between your breasts, above and to the side of your pregnant abdomen. SEAT BELT REMINDER WARNING The occupant protection system will only provide optimum protection when you use the seat belt properly. DISABLING THE PASSENGER AIRBAG The seat belt reminder warning lamp illuminates and an audible warning will sound if the driver's or front seat passenger's seat belt has not been fastened and the vehicle exceeds a relatively low speed. It will also illuminate if the driver's or front seat passenger's seat belt is unfastened when the vehicle is moving. The audible warning and warning lamp will go off after seven minutes. WARNING Make sure that the passenger airbag is disabled when using a rearward facing child restraint on the front passenger seat. Deactivating the seat belt reminder See your dealer. USING SEAT BELTS DURING PREGNANCY E71313 Fitting the passenger airbag deactivation switch WARNING If you need to fit a child restraint on a seat protected by an operational airbag in front of it, have a passenger airbag deactivation switch fitted. Ask your dealer for further information. E68587 WARNING Note: The key switch is located in the glove compartment with an airbag deactivation lamp in the instrument panel. Position the seat belt correctly for your safety and that of your unborn child. Do not use only the lap strap or the shoulder strap. 31 Occupant protection If the airbag warning lamp illuminates or flashes when you are driving, this indicates a malfunction. See Warning lamps and indicators (page 79). Remove the child restraint and have the system checked immediately. Disabling the passenger airbag A B E71312 A Disabled B Enabled Turn the switch to position A. When you switch the ignition on, check that the passenger airbag deactivation warning lamp illuminates. Enabling the passenger airbag WARNING Make sure that the passenger airbag is enabled when you are not using a child restraint on the front passenger seat. Turn the switch to position B. 32 Keys and remote controls GENERALINFORMATIONON RADIO FREQUENCIES Reprogramming the unlocking function CAUTION Note: When you press the unlock button either all the doors are unlocked or only the driver’s door is unlocked. Pressing the unlock button again unlocks all the doors. The radio frequency used by your remote control can also be used by other short distance radio transmissions (e.g. amateur radios, medical equipment, wireless headphones, remote controls and alarm systems). If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key. Press and hold the unlock and lock buttons on the remote key simultaneously for at least four seconds with the ignition off. The direction indicators will flash twice to confirm the change. To return to the original unlocking function, repeat the process. CHANGING THE REMOTE CONTROL BATTERY Note: You could unlock the doors if you press the buttons on the remote control unintentionally. Make sure that you dispose of old batteries in an environmentally friendly way. Seek advice from your local authority regarding recycling. The operating range between your remote control and your vehicle varies depending on the environment. E107998 PROGRAMMING THE REMOTE CONTROL Remote control with a folding key blade You can programme a maximum of eight remote controls to use with your vehicle (including any supplied with your vehicle). Programming a new remote control 1. Insert the key in the ignition. 2. Cycle the key from position 0 to II and then back to 0 four times in quick succession (about once a second). 3. Remove the key from the ignition and press any button on the remote control. 4. Reinsert the key and turn to position II then 0. Remove the key and test the remote control to confirm programming has been successful. 1 E74383 1. 33 Insert a screwdriver as far as possible into the slot on the side of the remote control, push it towards the key blade and remove the key blade. Keys and remote controls Remote control without a folding key blade Type 1 2 E74384 2. Twist the screwdriver in the position shown to start separating the two halves of the remote control. E74386 1. E74385 Insert a screwdriver into the recess on the back of the key and remove the key blade. 2. Release the retaining clips with the screwdriver and separate the two halves of the remote control. 3 CAUTION 3. Twist the screwdriver in the position shown to separate the two halves of the remote control. Do not touch the battery contacts or the printed circuit board with the screwdriver. CAUTION 3. Carefully prise out the battery with the screwdriver. 4. Install a new battery (3V CR 2032) with the + facing upwards. 5. Assemble the two halves of the remote control. 6. Install the key blade. Do not touch the battery contacts or the printed circuit board with the screwdriver. 4. Carefully prise out the battery with the screwdriver. 5. Install a new battery (3V CR 2032) with the + facing downwards. 6. Assemble the two halves of the remote control. 7. Install the key blade. 34 Keys and remote controls Type 2 6. Assemble the two halves of the remote control. 7. Install the key blade. Type 3 2 2 1 1 E78284 1. Slide the release slider in the direction of the arrow. 2. Remove the key blade. 1 E87964 1. Press and hold the pushbuttons on the edges to release the cover. Carefully remove the cover. 2. Remove the key blade. 3 3 E105064 3. Twist a flat bladed screwdriver in the position shown to separate the two halves of the remote control. CAUTION E105362 Do not touch the battery contacts or the printed circuit board with the screwdriver. 3. Twist a flat bladed screwdriver in the position shown to separate the two halves of the remote control. 4. Carefully prise out the battery with the screwdriver. 5. Install a new battery (3V CR 2032) with the + facing downwards. 35 Keys and remote controls 4 E119190 4 4. Carefully insert the screwdriver in the position shown to open the remote control. CAUTION Do not touch the battery contacts or the printed circuit board with the screwdriver. 5. Carefully prise out the battery with the screwdriver. 6. Install a new battery (3V CR 2032) with the + facing downwards. 7. Assemble the two halves of the remote control. 8. Install the key blade. 36 Locks LOCKING AND UNLOCKING When you lock the doors, the direction indicators will flash twice. Central locking Note: The driver’s door can be unlocked with the key. This needs to be used if the remote control is not functioning. Note: The direction indicators will flash twice as soon as you activate central locking. They will not flash again when you press the lock button on the remote control or turn the key for the second time, i.e. when you activate double locking. Note: Central locking also locks and unlocks the fuel filler flap. Locking and unlocking the doors with the key You can only centrally lock the doors if they are all closed. Double locking B B WARNING Do not activate double locking when persons or animals are inside the vehicle. You will not be able to unlock the doors from the inside if you have double locked them. A A E71962 E71961 A Unlock B Lock Double locking is a theft protection feature that prevents someone from opening the doors from the inside. You can only double lock the doors if they are all closed. Double locking the doors with the key Locking and unlocking confirmation Turn the key to the lock position twice within three seconds to double lock the doors. When you unlock the doors, the direction indicators will flash once. 37 Locks Locking and unlocking the doors and the luggage compartment lid with the remote control Locking and unlocking the doors from inside Driver's door A A B C B E87379 A Unlock B Lock C Luggage compartment lid unlock E71958 Double locking the doors and the luggage compartment lid with the remote control A Lock all doors B Unlock all doors Front and rear passenger doors Press button B twice within three seconds. E98653 To lock the front and rear passenger doors individually, press the button and close the door when leaving the vehicle. 38 Locks Luggage compartment lid Automatic relocking Opening the luggage compartment lid The doors will relock automatically if you do not open a door within 45 seconds of unlocking the doors with the remote control. The door locks and the alarm will return to their previous state. Reprogramming the unlocking function The unlocking function may be reprogrammed so that only the driver’s door is unlocked. See Programming the remote control (page 33). GLOBAL OPENING AND CLOSING You can also operate the electric windows with the ignition off via the global opening and global closing function. E78262 Note: Global closing will only operate if you have set the memory correctly for each window. See Electric windows (page 71). Opening the luggage compartment lid with the remote control Press button C on the remote control twice within three seconds. Global opening Closing the luggage compartment lid E71960 A recessed grip is incorporated inside the luggage compartment lid to facilitate closing. E71955 39 Locks Vehicles with keyless entry To open all the windows, press and hold the unlock button for at least three seconds. Press either the lock or the unlock button again to stop the opening function. Global closing Vehicles without keyless entry WARNING Take care when using global closing. In an emergency, press a button immediately to stop. E87384 WARNING Take care when using global closing. In an emergency, press the button on the driver’s door handle to stop. Note: Global closing can be activated using the button on the driver’s door handle. Global opening and closing can also be activated using the buttons on the passive key. To close all the windows, press and hold the button on the driver’s door handle for at least two seconds. The anti-trap function is also active during global closing. E71956 To close all the windows, press and hold the lock button for at least three seconds. Press any button again to stop the closing function. The anti-trap function is also active during global closing. 40 Engine immobiliser If you are unable to start the engine with a correctly coded key, this indicates a malfunction. The message Immobiliser active will appear in the information display when you switch on the ignition. Have the immobiliser checked immediately. PRINCIPLE OF OPERATION The engine immobiliser is a theft protection system that prevents someone from starting the engine with an incorrectly coded key. CODED KEYS Note: Do not shield your keys with metal objects. This may prevent the receiver from recognising your key as a valid one. Note: Have all of your remaining keys erased and recoded if you lose a key. Ask your dealer for further information. Have replacement keys recoded together with your existing keys. If you lose a key, you can obtain a replacement from your Ford Dealer. If possible, provide them with the key number from the tag provided with the original keys. You can also obtain additional keys from your Ford Dealer. ARMING THE ENGINE IMMOBILISER The engine immobiliser is armed automatically a short time after you have switched the ignition off. DISARMING THE ENGINE IMMOBILISER The engine immobiliser is disarmed automatically when you switch the ignition on with a correctly coded key. If the message Immobiliser active appears in the information display, your key has not been recognised. Remove the key and try again. 41 Alarm Battery back-up sounder PRINCIPLE OF OPERATION The battery back-up sounder is an extra alarm system which will sound a siren when the alarm is triggered. It is armed directly when you lock the vehicle. The sounder has its own battery and will sound an alarm siren even if someone disconnects the vehicle battery or the battery back-up sounder itself. Alarm system Your vehicle may be equipped with one of the following alarm systems: • • • • Perimeter alarm. Perimeter alarm with interior sensors. Category one alarm with interior sensors and battery back-up sounder. Category one alarm with interior sensors, battery back-up sounder and tilt sensors. Tilt sensors The tilt sensors detect if someone attempts to steal a wheel or tow the vehicle away by sensing changes in the inclination of the vehicle. Perimeter alarm Note: When travelling on a ferry with the alarm armed, deactivate the tilt sensors by selecting reduced guard. This will prevent the alarm from being triggered by the movement. The perimeter alarm is a deterrent against unauthorised access to your vehicle through the doors and the bonnet. It also protects the audio unit. Interior sensors Triggering the alarm Once armed, the alarm is triggered in any of the following ways: • • E71401 • WARNING The sensors in the interior lamp unit must not be covered up. Do not activate the alarm with full guard if any persons, animals or other moving objects are inside the vehicle. • • The sensors act as a deterrent against unauthorised intrusion by sensing any movement within the vehicle. • If someone opens a door, the tailgate or the bonnet without a valid key or remote control. If someone removes the audio or navigation system. If the ignition is turned to position I, II or III without a valid key. If the interior sensors detect movement within the vehicle. On vehicles with a battery back-up sounder, if someone disconnects the vehicle battery or the battery back-up sounder itself. If the tilt sensors detect a change in the inclination of the vehicle. If the alarm is triggered, the alarm horn will sound for 30 seconds and the hazard warning flasher will flash for five minutes. 42 Alarm Selecting full or reduced guard Any further attempts to perform one of the above will trigger the alarm again. Note: Selecting Reduced does not set the alarm permanently to reduced guard. It sets it to reduced guard only for the current ignition cycle. If you regularly set the alarm to reduced guard, select Ask on Exit. Full and reduced guard Full guard Full guard is the standard setting. In full guard, the interior and tilt sensors are activated when you arm the alarm. Note: This may result in false alarms if animals or moving objects are inside the vehicle or, on vehicles with tilt sensors, when travelling on a ferry. Reduced guard In reduced guard, the interior and tilt sensors are deactivated when you arm the alarm. E70499 Note: You can set the alarm to reduced guard for the current ignition cycle only. The next time you switch on the ignition, the alarm will be reset to full guard. Alarm Ask on Exit Full Guard Reduced Ask on Exit You can set the information display to ask you each time which level of guard you wish to set. If you select Ask on Exit, the message Reduced guard? appears in the instrument cluster display each time you switch the ignition off. If you wish to arm the alarm with reduced guard, press the OK button when this message appears. E74509 1. Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Alarm and press the right arrow button. If you wish to arm the alarm with full guard, leave the vehicle without pressing the OK button. 43 Alarm 4. Highlight Reduced or Full guard. If you prefer to be asked each time you switch off the ignition, select Ask on Exit. 5. Press the OK button to confirm the selection. 6. Press the left arrow button to exit the menu. To return to the trip computer display directly, hold the left arrow button pressed. Information messages See Information messages (page 95). ARMING THE ALARM All vehicles To arm the alarm, lock the vehicle with the key or remote control. DISARMING THE ALARM Perimeter alarm Disarm and silence the alarm by unlocking the doors with the key, switching the ignition on with a correctly coded key or unlocking the doors with the remote control. See Locking and unlocking (page 37). Category one alarm Disarm and silence the alarm by unlocking the doors with the key in the driver’s door and switching the ignition on with a correctly coded key within 12 seconds or unlocking the doors with the remote control. See Locking and unlocking (page 37). 44 Steering wheel ADJUSTING THE STEERING WHEEL WARNING Make sure that you fully engage the locking lever when returning it to its original position. WARNING Never adjust the steering wheel when the vehicle is moving. AUDIO CONTROL Note: Make sure that you are sitting in the correct position. See Sitting in the correct position (page 118). A E 2 B D 2 C E72288 1 E95178 A Volume up B Seek up C Volume down D Seek down E Mode Mode Press and hold the mode button to select the audio source. Press the mode button to: • tune the radio to the next preset station • play the next CD • play the other side of a cassette tape • accept an incoming telephone call. • end a telephone call. 3 E95179 45 Steering wheel Seek Press a seek button to: • tune the radio to the next station up or down the frequency band • play the next or the previous CD track • fast forward or rewind the cassette tape. Press and hold a seek button to: • tune the radio up or down the frequency band • seek through a CD track. 46 Wipers and washers WINDSCREEN WIPERS AUTOWIPERS B CAUTIONS Do not switch autowipers on in dry weather conditions. The rain sensor is very sensitive and the wipers may operate if dirt, mist or flies hit the windscreen. A Replace the wiper blades as soon as they begin to leave bands of water and smears. If you do not replace them, the rain sensor will continue to detect water on the windscreen and the wipers will operate, even though the majority of the windscreen is dry. D C Fully defrost the windscreen in icy conditions before you switch autowipers on. E70696 A Single wipe B Intermittent wipe C Normal wipe D High speed wipe Switch autowipers off before you enter a car wash. A B Intermittent wipe A B C E70315 E70315 C A Short wipe interval B Intermittent wipe C Long wipe interval 47 A High sensitivity B On C Low sensitivity Wipers and washers If you switch autowipers on, the wipers will not cycle until water is detected on the windscreen. The rain sensor will then continuously measure the amount of water on the windscreen and adjust the speed of the wipers automatically. ADJUSTING THE WINDSCREEN WASHER JETS Adjust the sensitivity of the rain sensor using the rotary control. With low sensitivity, the wipers will operate when the sensor detects a lot of water on the windscreen. With high sensitivity, the wipers will operate if the sensor detects a small amount of water on the windscreen. WINDSCREEN WASHERS WARNING E73425 Do not operate the windscreen washers for more than 10 seconds or when the reservoir is empty. The eye ball jets can be adjusted precisely using a pin. Note: The washer jets are heated when the ignition is on. REAR WINDOW WIPER AND WASHERS Intermittent wipe E70776 E70777 48 Wipers and washers Reverse gear wipe CHECKING THE WIPER BLADES The rear window wiper will operate automatically when you select reverse gear if the wiper lever is in position B, C or D. Washer WARNING Do not operate the rear window washer for more than 10 seconds or when the reservoir is empty. E66644 Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blade lips with water applied with a soft sponge. CHANGING THE WIPER BLADES E70777 Pull the lever fully towards the steering wheel and hold it to operate the washer. Windscreen wiper blades CAUTIONS Set the windscreen wipers in the service position to change the wiper blades. HEADLAMP WASHERS The headlamp washers will operate with the windscreen washers when the headlamps are on. You can use the service position in winter to provide easier access to the wiper blades for freeing them from snow and ice. The windscreen wipers will return to their normal position as soon as you switch on the ignition so make sure that you fully defrost the windscreen before you switch on the ignition. Note: To stop the washer fluid reservoir emptying quickly, the headlamp washers will not operate every time that you use the windscreen washers. 49 Wipers and washers Note: The windscreen wiper blades are different lengths. See Technical specifications (page 51). If you install wiper blades of the wrong length, the rain sensor may not work correctly. Install in the reverse order. Note: Make sure that the wiper blade locks into place. Rear window wiper blades Set the windscreen wipers in the service position. 2 1 E75184 E93783 3 A E75188 Switch off the ignition and move the wiper lever to position A within three seconds. Release the lever when the windscreen wipers have moved to the service position. E93784 Lift the wiper arms. 2 1 E72899 50 Wipers and washers 6 5 E93786 4 Install in the reverse order. E93785 TECHNICAL SPECIFICATIONS Windscreen wiper blade lengths Dimension in mm (inches) Item Left-hand Right-hand Vehicles with autowipers 750 (29.5) 700 (27.6) Vehicles without autowipers 750 (29.5) 650 (25.6) 51 Lighting One side LIGHTING CONTROL A Lighting control positions A B C B E75505 E70718 A Right-hand side B Left-hand side Main and dipped beam A Off B Side and tail lamps C Headlamps Parking lamps CAUTION Prolonged use of the parking lamps will discharge the battery. Switch off the ignition. E70725 Both sides Pull the lever fully towards the steering wheel to switch between main and dipped beam. Set the lighting control to position B. Headlamp flasher Pull the lever slightly towards the steering wheel. 52 Lighting Home safe lighting FRONT FOG LAMPS Switch the ignition off and pull the direction indicator lever towards the steering wheel to switch the headlamps on. You will hear a short tone. The headlamps will go off automatically after three minutes with any door open, or 30 seconds after the last door has been closed. With all doors closed, but within the 30 second delay, opening any door will result in the three minute timer starting again. E70721 WARNING Only use the front fog lamps when visibility is considerably restricted by fog, snow or rain. The home safe lights can be cancelled by either pulling the direction indicator lever towards the steering wheel again or by turning the ignition switch on. REAR FOG LAMPS AUTOLAMPS E70720 WARNINGS Only use the rear fog lamps when visibility is restricted to less than 50 metres. E70719 Note: If you have switched autolamps on, you can only switch the main beam on when autolamps has switched the headlamps on. Do not use the rear fog lamps when it is raining or snowing and visibility is more than 50 metres. The headlamps will come on and go off automatically depending on the ambient light. 53 Lighting ADJUSTING THE HEADLAMPS - VEHICLES WITH: ADAPTIVE FRONT LIGHTING/XENON HEADLAMPS To adjust the headlamps for driving on the left or right hand side of the road, see your dealer. HEADLAMP LEVELLING A B E70722 Note: Vehicles with Xenon headlamps are equipped with automatic headlamp levelling. A Raised headlamp beams B Lowered headlamp beams You can adjust the level of the headlamp beams according to the vehicle load. Recommended headlamp levelling switch positions Load Front seats Second row seats Third row seats Load in luggage compartment Switch position 1-2 - - - 0 1-2 - 2 - 0 (0.5) 1-2 3 - - 1 (0.5) 1-2 3 - Max 1 - - Max 1 See Vehicle identification plate (page 235). 2 Vehicles with active suspension. 54 2 2 1 3 (0.5) 1 4 (1.5) 2 2 Lighting HAZARD WARNING FLASHERS E71943 For item location: See Quick start (page 11). Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers may flash if you brake heavily. ADAPTIVE FRONT LIGHTING SYSTEM (AFS) A A B B E72897 A without AFS B with AFS The system will not operate when the vehicle is stationary, when you have switched on the daytime running lamps or when you have selected reverse gear. The AFS adjusts the headlamp dipped beam depending on vehicle direction and speed. It improves visibility when you are driving at night and helps to reduce headlamp glare for oncoming drivers. 55 Lighting A message will appear in the information display if the system malfunctions. See Information messages (page 95). The headlamps will move to a fixed central or dipped position. Have the system checked as soon as possible. Cornering lamps A A B B E72898 A Headlamp beam B Cornering lamp beam The cornering lamps illuminate the inside of a corner when you are turning. 56 Lighting If you set the switch to position B, the courtesy lamp will come on when you unlock or open a door or the luggage compartment lid. If you leave a door open with the ignition switch off, the courtesy lamp will go off automatically after some time to prevent the vehicle battery from discharging. To switch it back on, switch on the ignition for a short time. DIRECTION INDICATORS The courtesy lamp will also come on when you switch off the ignition. It will go off automatically after a short time or when you start or restart the engine. E70727 If you set the switch to position C with the ignition switch off, the courtesy lamp will come on. It will go off automatically after a short time to prevent the vehicle battery from discharging. To switch it back on, switch on the ignition for a short time. Note: Tap the lever up or down to make the direction indicators flash only three times. INTERIOR LAMPS Reading lamps Courtesy lamp A B C E71946 If you switch off the ignition, the reading lamps will go off automatically after some time to prevent the vehicle battery from discharging. To switch them back on, switch on the ignition for a short time. E71945 A Off B Door contact C On 57 Lighting Vanity mirror lamps A B E72900 A B E72257 Off Note: When you remove the headlamp, make sure that the front screw remains in the headlamp moulding. On If you switch off the ignition, the vanity mirror lamps will go off automatically after a short time to prevent the vehicle battery from discharging. To switch them back on, switch on the ignition for a short time. 2. Remove the screws. REMOVING A HEADLAMP WARNING Have Xenon bulbs changed by a properly trained technician. There is a risk of electric shock. 1. Open the bonnet. See Opening and closing the bonnet (page 206). E88875 3. Disconnect the electrical connector. 4. Pull the headlamp as far as possible towards the centre of the vehicle and disengage it from the lower fixing point. 5. Lift the outer side of the headlamp and remove it. Note: When fitting the headlamp, make sure that you reconnect the electrical connector properly. 58 Lighting Note: When fitting the headlamp, make sure that you fully engage the headlamp in the lower fixing point. A B C D Note: When fitting the headlamp, make sure that the front screw is located in the headlamp moulding before you install it. Note: When fitting the headlamp, tighten the front screw first and then the rear screw. E72258 CHANGING A BULB WARNINGS Switch the lights and the ignition off. Let the bulb cool down before removing it. A Direction indicator B Headlamp main beam C Headlamp dipped beam D Cornering lamp Direction indicator Have Xenon bulbs changed by a properly trained technician. There is a risk of electric shock. 1. Remove the headlamp. See Removing a headlamp (page 58). CAUTIONS Do not touch the glass of the bulb. Only fit bulbs of the correct specification. See Bulb specification chart (page 69). 2 Note: The following instructions describe how to remove the bulbs. Fit replacements in the reverse order unless otherwise stated. 3 Headlamp E72259 Note: Remove the covers to gain access to the bulbs. 2. Turn the bulb holder anti-clockwise and remove it. 3. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. 59 Lighting Headlamp main beam 1. Remove the headlamp. See Removing a headlamp (page 58). 3 2 2 E72262 3 2. Disconnect the electrical connector. 3. Release the clip and remove the bulb. E72261 Side repeater 2. Disconnect the electrical connector. 3. Release the clip and remove the bulb. Headlamp dipped beam 1. Remove the headlamp. See Removing a headlamp (page 58). 3 E72263 2 1. E72260 2. Turn the bulb holder anti-clockwise and remove it. 3. Remove the bulb. Cornering lamp 1. Remove the headlamp. See Removing a headlamp (page 58). 60 Carefully remove the side repeater. Lighting 3 2 E72291 2. Remove the bulb holder. 3. Remove the bulb. E72265 2. Remove the lamp. 3. Remove the bulb. Approach lamp Note: Position the mirror glass as far inwards as possible. Front fog lamp and side lamp (S-MAX) 1 E72266 1. E72264 1. Insert a screwdriver into the gap between the mirror housing and the mirror glass and release the metal retaining clip. 61 Remove the trim. Lighting Front fog lamp and side lamp (Galaxy) 4 2 E72268 2. Release the clip at the top edge of the lamp using a screwdriver. 3. Remove the lamp. 3 8 1 7 E72267 1. Remove the screws. 2. Remove the lamp. 3. Disconnect the fog lamp electrical connector. 6 5 Note: You cannot separate the fog lamp bulb from the bulb holder. 4 4. Turn the fog lamp bulb holder anti-clockwise and remove it. E74542 4. Disconnect the electrical connector. 5 Note: You cannot separate the fog lamp bulb from the bulb holder. 5. Turn the fog lamp bulb holder anti-clockwise and remove it. 6. Disconnect the electrical connector. 7. Turn the side lamp bulb holder anti-clockwise and remove it. 8. Remove the side lamp bulb. 6 E72269 5. Turn the side lamp bulb holder anti-clockwise and remove it. 62 Lighting 6. Remove the side lamp bulb. Rear lamp (S-MAX) Direction indicator and brake and tail lamp E74079 3. Remove the lamp. 4. Disconnect the electrical connector. E74078 1. Remove the trim panels. E74080 E72270 5. Remove the screw. 6. Remove the bulb holder. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. 2. Remove the wing nuts. 63 Lighting Reversing lamp, fog lamp and tail lamp E74077 5. Remove the screw. 6. Remove the bulb holder. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. E72271 1. Remove the trim panel. Rear lamp (Galaxy) Direction indicator, brake lamp and tail lamp E74076 2. Remove the wing nuts. 3. Remove the lamp. 4. Disconnect the electrical connector. E75380 1. 64 Remove the trim panel. Lighting E72791 E72793 2. Remove the wing nuts. 5. Remove the screw. 6. Remove the bulb holder. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. Reversing lamp, fog lamp and tail lamp E72792 3. Remove the lamp. 4. Disconnect the electrical connector. E72794 1. 65 Remove the trim panel. Lighting 8. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. Central high mounted brake lamp (S-MAX) E72795 2. Remove the wing nuts. 3. Remove the lamp. 4. Disconnect the electrical connector. E75459 1. Remove the trim panel. E72797 5. Turn the bulb holder anti-clockwise and remove it. E75460 2. Release the spring clips. E72798 E72790 6. Remove the screws. 7. Remove the bulb holder. 3. Remove the lamp. 4. Remove the bulb. 66 Lighting Central high mounted brake lamp (Galaxy) Number plate lamp 2 1 3 E72789 1. Carefully release the spring clip. 2. Remove the lamp. 3. Turn the bulb anti-clockwise and remove it. E75457 1. Remove the trim panel. Interior lamps Vehicles without interior sensors 3 E75458 2. Release the spring clips. 2 E72788 1. Carefully prise out the lens. 2. Remove the lens. 3. Remove the bulb. E72790 3. Remove the lamp. 4. Remove the bulb. 67 Lighting Vehicles with interior sensors Vehicles with interior sensors 3 1 2 2 2 E72787 E72786 1. Carefully prise out the lens. 2. Remove the lens. 3. Remove the bulb. 1. Carefully prise out the lamp. 2. Turn the bulb holder anti-clockwise and remove it. Reading lamps Vehicles without interior sensors 3 3 E73939 2 3. Remove the bulb. E72796 1. Carefully prise out the lens. 2. Remove the lens. 3. Remove the bulb. 68 3 Lighting Vanity mirror lamp Luggage compartment lamp E72785 1. Carefully prise out the lamp. 2. Remove the bulb. E72784 1. Carefully prise out the lamp. 2. Remove the bulb. BULB SPECIFICATION CHART Lamp Specification Power (watt) Front direction indicator PY21W 21 Headlamp main beam H1 55 Headlamp dipped beam H7 55 Cornering lamp H1 55 Side repeater WY5W 5 Approach lamp W5 5 Front fog lamp (S-MAX) H8 35 Front fog lamp (Galaxy) HB4 55 Side lamp W5W 5 Rear direction indicator PY21W 21 Brake and tail lamp (S-MAX) P21/5W 21/5 Brake lamp (Galaxy) P21W 21 Tail lamp (Galaxy) W5W 5 69 Lighting Lamp Specification Power (watt) Rear fog lamp P21W 21 Reversing lamp P21W 21 Central high mounted brake lamp W16W 16 Number plate lamp C5W 5 Interior lamp Festoon 10 Reading lamp BA 9s 5 Vanity mirror lamp W5W 5 Luggage compartment lamp W5W 5 70 Windows and mirrors Driver’s door switches ELECTRIC WINDOWS WARNING Do not operate the electric windows unless they are free from obstruction. Note: If you operate the switches often during a short period of time, the system might become inoperable for a certain time to prevent damage due to overheating. Note: You can operate the windows for several minutes after you switch off the ignition. They will be deactivated as soon as a door is opened. Note: If you operate both the switch on the relevant door and the switch for that window on the driver’s door at the same time, the window will stop moving. E121510 You can operate all the windows with the switches on the door trim panel of the driver’s door. Switch on the ignition to operate the electric windows. Front and rear passengers’ door switches Global opening and global closing You can also operate the electric windows with the ignition off via the global opening and global closing function. See Global opening and closing (page 39). Note: Global opening and global closing will open or close the windows automatically only on vehicles equipped with four electric windows. Note: Global closing will only operate if you have set the memory correctly for each window. E70849 Opening and closing the windows automatically Press or lift the switch to the second action point and release it. Press or lift it again to stop the windows. 71 Windows and mirrors Safety switch for rear windows Overriding the anti-trap function Note: You can always operate the rear windows from the driver’s door. CAUTION While you close the window for the third time, the anti-trap function is disabled. Make sure there are no obstacles in the way of the closing window. To override this protection function when there is a resistance, for example, in the winter, proceed as follows: 1. Close the window twice until it reaches the resistance and let it reverse. 2. Close the window a third time to the resistance. The anti-trap function is disabled and you cannot close the window automatically. The window will override the resistance and you can close it fully. 3. If the window does not close after the third attempt, have it checked by a properly trained technician. E121511 A switch in the driver’s door disables the rear electric window switches. The light in the switch illuminates and the lights in the rear window switches go off when the rear windows are disabled. Resetting the memory of the electric windows Anti-trap function WARNING The anti-trap function is deactivated until you have reset the memory. WARNING Careless closing of the windows can override the protection function and cause injuries. After the battery has been disconnected from the vehicle you must reset the memory separately for each window: The electric windows will stop automatically while closing and reverse some distance if there is an obstacle in the way. 1. Lift the switch until the window is fully closed. Hold the switch lifted for one more second. 2. Release the switch and lift it again, two or three times, for one more second. 3. Open the window and try to close it automatically. 4. Reset and repeat procedure if the window does not close automatically. 72 Windows and mirrors Safety mode ELECTRIC EXTERIOR MIRRORS WARNING The anti-trap function is not active during this procedure. If the system detects a malfunction, it enters a safety mode. The windows will move for only about 0.5 seconds at a time and then stop again. Close the windows by pressing the switch again when the windows stop moving. Have this checked immediately. EXTERIOR MIRRORS A WARNING B E70846 Do not overestimate the distance of the objects that you see in the convex mirror. Objects seen in convex mirrors will appear smaller and further away than they actually are. C A Left-hand mirror B Off C Right-hand mirror Mirror tilting positions Manual folding mirrors Folding Push the mirror towards the door window glass. Unfolding Make sure that you fully engage the mirror in its support when returning it to its original position. E70847 The electric exterior mirrors are fitted with a heating element that will defrost or demist the mirror glass. See Heated windows and mirrors (page 112). 73 Windows and mirrors Electric folding mirrors If you press the switch again while the mirrors are moving, they will stop and reverse the direction of movement. Automatic folding and unfolding Note: When the mirrors are operated often during a short period of time, the system may become inoperable for a period of time to prevent damage due to overheating. Note: If the mirrors have been folded using the manual fold button they can only be unfolded using the manual fold button. The mirrors will fold automatically when you lock the vehicle with the key, the remote control or a keyless entry system request. The mirrors will unfold when you unlock the vehicle with the key, the remote control, a keyless entry system request, the driver's interior door handle or starting the engine. Reverse mirror dipping Depending on the switch position (A or C), the relevant exterior mirror will dip whenever you select reverse gear, giving you a view of the kerb. Note: You can disable this feature by leaving the switch in position B. Manual folding and unfolding The electric folding mirrors operate with the ignition on. The exterior mirror will return to the original position: • If the vehicle speed exceeds 10 km/h (6 mph). • Approximately 10 seconds after reverse gear has been disengaged. • If the switch is returned to position B. Note: You can operate the mirrors (mirror tilting and folding) for several minutes after you switch off the ignition. They will be deactivated as soon as a door is opened. When you first use this feature, the mirror will dip to a preset position. This position can be adjusted using the following sequence: 1. Turn the ignition on. Do not start the engine. 2. Select the desired exterior mirror (A or C). 3. Select reverse gear, the selected exterior mirror will adjust to a preset position. 4. Adjust the mirror to the required dipped position. 5. Disengage reverse gear or press and hold the desired memory pre-set button until a single chime sounds to confirm. See Memory function (page 134). E72623 Press the button to fold or unfold the mirrors. The settings will be stored automatically. 74 Windows and mirrors AUTO-DIMMING MIRROR 2 E71028 The auto-dimming mirror will adjust automatically when hit by glaring light from behind. It will not work when you have selected reverse gear. E95383 Closing REAR QUARTER WINDOWS Manual rear quarter windows Opening 1 1 E95384 E72126 75 Windows and mirrors 2 E95385 Note: Make sure that the lever is securely engaged in its catch. Electric rear quarter windows Switch on the ignition to operate the rear quarter windows. E72127 76 Instruments GAUGES Type 1 and 2 A B C E72984 A Tachometer B Engine coolant temperature gauge C Fuel gauge D Speedometer 77 D Instruments Type 3 A B E D C E87713 A Tachometer B Speedometer C Engine coolant temperature gauge D Fuel gauge E Message centre. See Information displays (page 82). CAUTION Engine coolant temperature gauge Do not restart the engine until the cause of overheating has been resolved. Shows the temperature of the engine coolant. At normal operating temperature, the needle will remain in the centre section. If the needle moves towards 120°C, the engine is overheating. Stop the engine, switch the ignition off and determine the cause once the engine has cooled down. See Engine coolant check (page 214). 78 Instruments Fuel gauge Brake system lamp The arrow adjacent to the fuel pump symbol tells you on which side of your vehicle the fuel filler cap is located. It illuminates when the parking brake is engaged. WARNING WARNING LAMPS AND INDICATORS Reduce your speed gradually and stop your vehicle as soon as it is safe to do so. Use your brakes with care. The following warning lamps and indicators will illuminate briefly when you switch the ignition on to confirm that the system is operational: • ABS • Airbag • Brake system • Engine • Electric parking brake (EPB) • Frost • Ignition • Oil pressure (all except 2.5L Duratec) • Stability control (ESP) If it illuminates when you are driving, check that the parking brake is not engaged. If the parking brake is not engaged, this indicates a malfunction. Have the system checked by a properly trained technician immediately. Cruise control indicator It will illuminate when you have set a speed using the cruise E71340 control system. See Using cruise control (page 160). On vehicles with adaptive cruise control (ACC), the indicator will illuminate when ACC is active. See Using ACC (page 163). If a warning or indicator lamp does not illuminate when the ignition is switched on, this indicates a malfunction. Have the system checked by properly trained technician. Direction indicators Flashes during operation. A sudden increase in the rate of flashing warns of a failed indicator bulb. See Changing a bulb (page 59). ABS warning lamp If it illuminates when you are driving, this indicates a malfunction. You will continue to have normal braking (without ABS). Have the system checked by a properly trained technician as soon as possible. Engine warning lamp If it illuminates with the engine running, this indicates a malfunction. If it flashes when you are driving, reduce the speed of your vehicle immediately. If it continues to flash, avoid heavy acceleration or deceleration. Have the system checked by a properly trained technician immediately. Airbag warning lamp If it illuminates when driving, this indicates a malfunction. Have the system checked by a properly trained technician. 79 Instruments Headlamp indicator CAUTION If the engine warning lamp illuminates in conjunction with a message, have the system checked as soon as possible. It will illuminate when you switch the headlamp dipped beam or the side and tail lamps on. Ignition warning lamp Electric parking brake (EPB) warning lamp If it illuminates when you are driving, this indicates a malfunction. Switch off all unnecessary electrical equipment. Have the system checked by a properly trained technician immediately. It will illuminate when an EPB warning message is displayed in the information display. See Electric parking brake (EPB) (page 150). Low fuel level warning lamp Forward alert indicator If it illuminates, refuel as soon as possible. It will illuminate when this feature is active. See Forward alert function (page 166). Main beam indicator Front fog lamp indicator It will illuminate when you switch the headlamp main beam on. It will flash when you use the headlamp flasher. It will illuminate when you switch the front fog lamps on. Message indicator Frost warning lamp It will illuminate when a new message is stored in the information display. See Information messages (page 95). WARNING Even if the temperature rises to above 4ºC (39.2°F) there is no guarantee that the road is free of hazards caused by inclement weather. Oil pressure warning lamp It will illuminate and glow amber when the outside air temperature is between 4ºC (39.2ºF) and 0ºC (32ºF). It will glow red when the temperature is below 0ºC (32ºF). CAUTION Do not resume your journey if the oil pressure warning lamp illuminates despite the oil level being correct. Have the system checked by a properly trained technician immediately. Glow plug indicator See Starting a diesel engine (page 139). 80 Instruments If the lamp stays on after starting or illuminates during a journey, this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level. See Engine oil check (page 214). AUDIBLE WARNINGS AND INDICATORS Rear fog lamp indicator To set which chimes should sound: Switching the chimes on and off You can deactivate certain chimes. It will illuminate when you switch the rear fog lamps on. Seat belt reminder See Seat belt reminder (page 31). Shift indicator E70499 It will illuminate to inform you that shifting to a higher gear may give better fuel economy and lower CO2 emissions. It will not illuminate during periods of high acceleration, braking or when the clutch pedal is pressed. 1. 2. 3. Stability control (ESP) warning lamp 4. While driving, it flashes during activation of the system. After switching on the ignition, if it does not illuminate or illuminates continuously while driving, this indicates a malfunction. During a malfunction, the system switches off. Have the system checked by a properly trained technician as soon as possible. 5. If you switch ESP off, the warning lamp will illuminate. The lamp will go out when you switch the system back on or when you switch the ignition off. 81 Press the right arrow button on the steering wheel to enter the main menu. Highlight Setup with the up and down arrow buttons and press the right arrow button. Highlight Chimes and press the right arrow button. Highlight the chime and press the OK button to switch the chime on and off. Press the left arrow button to exit the menu. Press and hold the left arrow button to return to the main menu display. Information displays Press the up and down arrow buttons: GENERAL INFORMATION • WARNING • Do not operate the information display controls when the vehicle is moving. to scroll through the trip computer displays to scroll through and highlight the options within a menu. Press the right arrow button: • Note: The information display will remain on for several minutes after you switch off the ignition. • to enter the main menu from the trip computer displays to enter a sub-menu. Various systems on your vehicle can be controlled using the buttons on your steering wheel. Corresponding information is displayed in the information display. Press the left arrow button to exit a menu. For detailed instructions on audio, navigation, phone etc. refer to the appropriate manual. Note: The system will return to the trip computer displays automatically if you do not press any button for a period of time. Controls Press the OK button to choose and confirm a setting. Hold the left arrow button pressed at any time to return to the main menu display (escape button). E70499 Instrument cluster functions Type 1 Type 2 Type 3 Trip computer Function X X X Information messages X X X Clock setup X X X Display settings - X X Park heater setup - X X 82 Information displays Function Type 1 Type 2 Type 3 Navigation control - - X CD control - - X CD changer control - - X Radio control - - X Phone control - - X Auxiliary input control - - X Press the up and down arrow buttons on the steering wheel to scroll through the trip computer displays. See Trip computer (page 91). Type 1 E80604 Menu structure Reset trip Information Clock Tripodometer Avg. fuel Avg. speed All values Messages Set clock 24 Hour mode 12 Hour mode E87751 83 Information displays Type 2 Press the up and down arrow buttons on the steering wheel to scroll through the trip computer displays. See Trip computer (page 91). 09:00 Average Fuel l 6.3 100km 123456 km 234.2 km E74426 84 Information displays Menu structure Reset Trip Trip Odo Avg. fuel Avg. speed All Information Messages Tyre Press. Clock Set Clock 24 Hour Mode 12 Hour Mode Display Setup Configure Help Screen Radio Info Phone Info NAV info Always off On guidance Always on Language English Deutsch Italiano Français Español Türkçe Pyccкий Nederlands Polski Svenska Português Measure unit A B E87752 85 Metric Imperial Information displays A B Chimes Forw. Alert Low Fuel General info. General warn. Home light ACC warning FA warning Sensitivity Early Normal Late Warn Audible Hill Launch Tyre Pressure Off Auto Manual Check Low load High load Alarm Full guard Reduced Ask on exit Aux. Heater Time 1 Set Time Monday Tuesday Wednesday Thursday Friday Saturday Sunday Time 2 Set Time Monday Tuesday Wednesday Thursday Friday Saturday Sunday Parkheater E87753 Once Active now 86 Information displays Type 3 CD CD changer Radio Phone E88048 Trip computer Use the controls to scroll through the menu displays. Settings Device list The highlighted icon shows the current menu in use. Auxiliary input Navigation 87 Information displays Menu structure Navigation Home Destinat. mem. Destinat. A-Z Last destinat. Cancel guidan. Destinations Destinations Destinations CD Folder / Tracks CD changer CD 1 CD 2 CD 3 CD 4 CD 5 CD 6 Folder / Tracks Folder / Tracks Folder / Tracks Folder / Tracks Folder / Tracks Folder / Tracks Radio Station list FM 1 / FM FM 2 FM 3 FM - AST MW / AM LW / AM-AST Stations Stations Stations Stations Stations Stations Stations Phone Phone book Redial Incoming calls Outgoing calls Call status Numbers A E87754 88 Numbers Numbers Information displays A Trip computer Distance to empty Average fuel Average speed Reset selected element Reset trip odometer Settings Information Messages Tyre Pressure Clock Set Clock 24-hour mode 12-hour mode Display Setup Colour themes Configure Help Screen NAV info Always off On guidance Always on Language English Deutsch Italiano Français Español Türkçe Pyccкий Nederlands Polski Svenska Português A B Measure unit C E87755 89 Metric Imperial Information displays C Chimes Forw Alert Low Fuel General info. General warn. Home light ACC warning FA warning Sensitivity Warn Audible Hill Launch Tyre Pressure Alarm Aux Heater E87756 90 Off Auto Manual Check Low load High load Full guard Reduced Ask on exit Early Normal Late Information displays A B Park heater Time 1 Set Time Monday Tuesday Wednesday Thursday Friday Saturday Sunday Time 2 Set Time Monday Tuesday Wednesday Thursday Friday Saturday Sunday Once Active now E88067 Auxiliary input Average fuel consumption TRIP COMPUTER Indicates the average fuel consumption since the function was last reset. Odometer Registers the total mileage of the vehicle. Average speed Tripmeter Indicates the average speed calculated since the function was last reset. Registers the mileage of individual journeys. Outside air temperature Shows the outside air temperature. Distance to empty Indicates the approximate distance the vehicle will travel on the fuel remaining in the tank. Changes in driving pattern may cause the value to vary. 91 Information displays Type 1 and 2 Resetting the trip computer using the main menu To reset a particular display: 10:20 1. Average Fuel l 6.3 100km A 123456 km B 234.2 km C Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Reset Trip with the up and down arrow buttons and press the right arrow button. 3. Highlight the function to be reset. 4. Press the right arrow button to select the function. 5. Hold the OK button pressed. To reset all three displays, select All values and hold the OK button pressed. E74428 A. Trip computer B. Odometer C. Tripmeter Type 3 The trip computer includes the following information displays: Average fuel Average speed A Outside air E88049 A Reset Trip Trip computer Press the OK button on the steering wheel to cycle through the different trip computer displays. To reset a value, press and hold the OK button. Dist. to empty E74441 Press the up and down arrow buttons on the steering wheel to scroll through the trip computer displays. Resetting the trip computer using the main menu Note: The position of the trip computer display may vary depending on the information shown in the display. 1. To reset a particular display: 92 Highlight Trip Computer with the up and down arrow buttons and press the right arrow button. Information displays Type 3 2. Highlight the function to be reset. 3. Hold the OK button pressed. 1. PERSONALISED SETTINGS 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Display and press the right arrow button. 4. Highlight Configure and press the right arrow button. 5. To toggle the Help screen and NAV Info on and off, highlight the desired setting and press the OK button to confirm the setting. The following information is displayed in the information display if you have selected it: Help screen, radio, navigation and phone information The help screen appears for a few seconds when you switch the ignition on. If the radio, navigation or telephone is operating, information relating to this system is displayed in the information display. Navigation information To select which information is displayed in the information display: You can also choose when the navigation information is displayed in the information display. Three options are available: Type 1 and 2 1. Highlight Settings with the up and down arrow buttons and press the right arrow button. • Press the right arrow button on the steering wheel to enter the main menu. • 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Display and press the right arrow button. 4. Highlight Configure and press the right arrow button. 5. To toggle the Help screen, Radio Info and Phone Info on and off, highlight the desired setting and press the OK button to confirm the setting. 6. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display. • Always off: No navigation information is displayed in the information display. On guidance: The navigation information will only appear when the navigation system provides a guidance instruction. This function is only available on certain navigation systems. Always on: Navigation information will always appear in the information display when the navigation system is operating. To set when navigation information should be displayed: Type 1 and 2 1. Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 93 Information displays 3. Highlight Display and press the right arrow button. 4. Highlight Configure and press the right arrow button. 5. Highlight Nav Info and press the right arrow button. 6. Highlight the desired setting and press the OK button to confirm the setting. 7. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Display and press the right arrow button. 4. Highlight Language and press the right arrow button. 5. Highlight the desired setting and press the OK button to confirm the setting. 6. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display. Type 3 1. Type 3 Highlight Settings with the up and down arrow buttons and press the right arrow button. 1. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Display and press the right arrow button. 4. Highlight Configure and press the right arrow button. 5. Highlight Nav Info and press the right arrow button. 6. Highlight the desired setting and press the OK button to confirm the setting. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Display and press the right arrow button. 4. Highlight Language and press the right arrow button. 5. Highlight the desired setting and press the OK button to confirm the setting. Units of measure Language Note: The outside air temperature is only displayed in degrees Celsius and cannot be set to degrees Fahrenheit. A choice of eleven languages are available: To select metric or imperial units: English, German, Italian, French, Spanish, Turkish, Russian, Dutch, Polish, Swedish and Portuguese. Type 1 and 2 1. Type 1 and 2 1. Highlight Settings with the up and down arrow buttons and press the right arrow button. Press the right arrow button on the steering wheel to enter the main menu. Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 94 Information displays 3. Highlight Display and press the right arrow button. 4. Highlight Measure Unit and press the right arrow button. 5. Highlight the desired setting and press the OK button to confirm the setting. 6. Press the left arrow button to return to exit the menu. Hold the left arrow button pressed to return to the trip computer display. With instrument cluster type 3, certain messages need to be confirmed before you can access the menus. Message indicator The message indicator illuminates to supplement some messages. It will be red or amber depending on the severity of the message and will remain on until the cause of the message has been rectified. Type 3 1. Message symbols Highlight Settings with the up and down arrow buttons and press the right arrow button. See Owner’s handbook. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Display and press the right arrow button. 4. Highlight Measure Unit and press the right arrow button. 5. Highlight the desired setting and press the OK button to confirm the setting. Have the system checked at the next service. Have the system checked as soon as possible. Stop your vehicle as soon as it is safe to do so. Viewing current messages INFORMATION MESSAGES Type 1 and 2 1. Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Information with the up and down arrow buttons and press the right arrow button. 3. Highlight Messages and press the right arrow button. 4. Use the up and down buttons to view the current messages. E70499 Press OK to acknowledge and remove some messages from the information display. Other messages will be removed automatically after a short time. Type 3 1. 95 Press the right arrow button on the steering wheel to enter the main menu. Information displays 2. Highlight Settings with the up and down arrow buttons and press the right arrow button. 3. Highlight Information with the up and down arrow buttons and press the right arrow button. 4. Highlight Messages and press the right arrow button. 5. Use the up and down buttons to view the current messages. Active suspension Message Message warning lamp Meaning IVDC malfunction amber The active suspension has malfunctioned. Have this checked as soon as possible. See Using active suspension (page 157). IVDC comfort - The active suspension is set to the comfort setting. IVDC normal - The active suspension is set to the normal setting. IVDC sport - The active suspension is set to the sport setting. Message Message warning lamp Meaning Alarm triggered amber The alarm has been triggered. Check your vehicle for signs of unauthorised access. Alarm system service reqd. - The alarm has malfunctioned. Have this checked as soon as possible. Alarm 96 Information displays Battery and charging system Message Overvoltage: Stop safely! Low battery Message warning lamp red Meaning The charging system voltage is above its normal operating range. Stop your vehicle as soon as it is safe to do so and switch off the ignition. Have this checked as soon as possible. amber The battery voltage is low. Have this checked as soon as possible. Message Message warning lamp Meaning Aux. Heater on amber The auxiliary heater is on. Climate control Cruise control and Adaptive cruise control (ACC) Message Message warning lamp Meaning Cruise control active - Cruise control is on. Cruise control standby - Cruise control is on standby. ACC unavailable - Stability control (ESP) may be switched off. Switch ESP back on and try ACC again. Otherwise try switching the ignition off and on to clear this message. ACC malfunction amber The ACC has malfunctioned. Have this checked as soon as possible. Clean radar sensor amber There may be something blocking the radar sensor. Clear any dirt, snow, water or other objects from the front grille area. Forward Alert malfunction amber Forward alert has malfunctioned. Have this checked as soon as possible. 97 Information displays Doors open Message Message warning lamp Meaning Driver door open red The driver side front door is open. Driver side rear door open red The driver side rear door is open. Passenger door open red The passenger side front door is open. Passenger side rear door open red The passenger side rear door is open. Luggage comp. open red The luggage compartment is open. Bonnet open red The bonnet is open. Message Message warning lamp Meaning Immobiliser active amber The engine immobiliser is on. See Engine immobiliser (page 41). Engine immobiliser Hill launch assist (HLA) Message Message warning lamp Meaning Hill Launch not available amber HLA has malfunctioned. Have this checked as soon as possible. Hill Launch Assist active - HLA is on. Hill Launch Assist off - HLA is off. Please use park brake ! amber HLA is deactivated due to a malfunction. Use the parking brake normally on hills. See Hill start assist (page 154). 98 Information displays Lighting Message Message warning lamp Meaning Front lights malfunction amber The adaptive front lighting system (AFS) has malfunctioned. Have this checked as soon as possible. Low beam: Bulb fault - One or both of the headlamp dipped beam bulbs have blown. Check the headlamp dipped beam bulbs. See Changing a bulb (page 59). Rear fog light: Bulb fault - One or both of the rear fog lamp bulbs have blown. Check the rear fog lamp bulbs. See Changing a bulb (page 59). Stop lamps: Bulb fault - One or both of the brake lamp bulbs have blown. Check the brake lamp bulbs. See Changing a bulb (page 59). Trailer stopl.: Bulb fault - One or both of the brake lamp bulbs on your trailer have blown. Check the brake lamp bulbs on your trailer. Trailer turnl.: Bulb fault - One or both of the direction indicator bulbs on your trailer have blown. Check the direction indicator bulbs on your trailer. Message Message warning lamp Meaning Engine malfunction red The engine system has malfunctioned. Have this checked as soon as possible. Check engine oil level amber The engine oil level is low. Check the engine oil level as soon as possible. See Engine oil check (page 214). Water detected in fuel amber There is water in the fuel. Have this checked as soon as possible. Low washer fluid level - The washer fluid level is low. Check the washer fluid level. See Washer fluid check (page 215). Maintenance 99 Information displays Message Message warning lamp Meaning Service oil - The engine oil needs to be changed. Have the engine oil changed as soon as possible. Message Message warning lamp Meaning Crash mode - Have the system checked as soon as possible. Message Message warning lamp Meaning Park brake applied amber Release the brake when driving. Failure to do so will result in the rear brakes overheating. Park brake applied red Release the brake when driving. Failure to do so will result in the rear brakes overheating. Occupant protection Parking brake Electric parking brake (EPB) Message Message warning lamp Meaning Park brake malfunction red The EPB has malfunctioned. Have this checked as soon as possible. Release park brake red Release the EPB. See Electric parking brake (EPB) (page 150). Re-Apply park brake red Apply the EPB again. See Electric parking brake (EPB) (page 150). Park brake applied amber The EPB is applied. Park brake released amber The EPB is released. Park brake service reqd. - The EPB has malfunctioned. Have this checked as soon as possible. 100 Information displays Power steering Message Message warning lamp Meaning Power steering malfunction amber The power steering system has malfunctioned. Have this checked as soon as possible. Stability control (ESP) Message Message warning lamp Meaning ESP off - Stability control is off. ESP malfunction - Stability control has malfunctioned. Have this checked as soon as possible. Message Message warning lamp Meaning Transmission malfunction red The transmission has malfunctioned. Have this checked as soon as possible. Transmission overtemperatur amber The transmission is over heating. Have this checked as soon as possible. Transmission Tyre pressure monitoring system Message Message warning lamp Meaning Check ..... tyre! red The tyre indicated has continued to deflate. Check the tyre and inflate it to the recommended pressure. See Technical specifications (page 232). Check tyre pressures red One or more of the tyres are significantly underinflated. This message may be displayed after a new sensor has been installed. Check the tyres and inflate them to the recommended pressure. See Technical specifications (page 232). 101 Information displays Message Message warning lamp Meaning Check ..... tyre amber The tyre indicated is significantly under-inflated. Check your tyres and inflate them to the recommended pressure. See Technical specifications (page 232). Tyre monitor malfunction amber You have installed a temporary spare wheel. Install a correctly inflated full size wheel with a sensor as soon as possible. When a malfunction occurs, the system may not be able to detect or signal low tyre pressure. Up to three sensors have malfunctioned, an unapproved accessory is interfering with the system or a general malfunction has been detected. Have the system checked as soon as possible. When a malfunction occurs, the system may not be able to detect or signal low tyre pressure. Inflate tyres for high speed amber The tyre pressures are not suitable for driving at 160 km/h (100 mph). Inflate the tyres to the recommended pressure. See Technical specifications (page 232). This message will be displayed for only a few seconds with a low tyre pressure warning. Tyre sensors not detected - You have installed wheels and tyres that do not have sensors. The tyre pressures will not be monitored. All sensors have malfunctioned or an unapproved accessory is interfering with the system. Have this checked as soon as possible. 102 Information displays Voice control Message Message warning lamp Meaning Voice control Please speak - Voice control is on. Voice control Not recognised - Check voice control. Voice control Not allowed - Voice control is not allowed in this mode. 103 Climate control Warming the interior PRINCIPLE OF OPERATION Direct the air towards your feet. In cold or humid weather conditions, direct some of the air towards the windscreen and the door windows. Outside air Keep the air intakes forward of the windscreen free from obstruction (snow, leaves etc.) to allow the climate control system to function effectively. Cooling the interior Direct the air towards your face. Recirculated air AIR VENTS CAUTION Prolonged use of recirculated air may cause the windows to mist up. If the windows mist up, follow the settings for defrosting and demisting the windscreen. Front air vents The air currently in the passenger compartment will be recirculated. Outside air will not enter the vehicle. Heating E71942 Heating performance depends on the temperature of the engine coolant. Air conditioning Note: The air conditioning operates only when the temperature is above 4ºC (39ºF). Note: If you use the air conditioning, the fuel consumption of your vehicle will be higher. Air is directed through the evaporator where it is cooled. Humidity is extracted from the air to help keep the windows free of mist. The resulting condensation is directed to the outside of the vehicle and it is therefore normal if you see a small pool of water under your vehicle. General information on controlling the interior climate Fully close all the windows. 104 Climate control Second row air vents Third row air vents C E73132 MANUAL CLIMATE CONTROL A B Air distribution control A B C B E C D E71379 E73131 A F Air flow through lower air vent A Windscreen Air flow through upper air vent B Footwell and windscreen Upper air vent C Footwell D Face level and footwell E Face level F Face level and windscreen Use the upper air vents to defrost or demist the side windows. 105 Climate control Ventilation You can set the air distribution control to any position between the symbols. Blower A E71378 Set the air distribution control, blower and air vents to suit your requirements. Air conditioning Switching the air conditioning on and off E75470 A Off If you turn the blower off, the air conditioning will turn off. When you turn the blower on again, the air conditioning will come on automatically. Note: If you switch the blower off, the windscreen may mist up. Recirculated air Cooling with outside air Press the button to toggle between outside air and recirculated air. Heating the interior quickly E71380 E71377 106 Climate control Cooling the interior quickly If you move the air distribution control to a position other than A, the A/C will remain on. You can switch the air conditioning and recirculated air on and off while the air distribution control is set to position A. If necessary, switch the heated windows on. See Heated windows and mirrors (page 112). Note: To defrost or demist the rear side windows, set the second row air vents to the defrosting and demisting position. See Air vents (page 104). E71381 Defrosting and demisting the windscreen Reducing interior air humidity E71382 E71383 When the temperature is above 4°C (39°F), the air conditioning will switch on automatically. Make sure that the blower is on. The indicator in the switch will illuminate during defrosting and demisting. 107 Climate control AUTOMATIC CLIMATE CONTROL Dual-zone E80737 Triple-zone E70302 108 Climate control Your vehicle is fitted with either a dual-zone or triple-zone system. When the system is in mono mode, all the temperature zones are linked to the driver's zone. When you switch mono mode off, the dual-zone system allows you to set different temperatures for the driver's and passenger's side. On vehicles fitted with a triple-zone system, you can set a third temperature for the rear. You can set the temperature between 16ºC (61ºF) and 28ºC (82ºF) in steps of 0.5ºC (1ºF). In position LO (below 16ºC [61ºF]) the system will switch to permanent cooling, in position HI (above 28ºC [82ºF]) to permanent heating, and will not regulate a stable temperature. Mono mode In mono mode, the temperature settings for both the driver’s and passenger’s side are linked. If you adjust the temperature using the rotary control on the driver’s side, the same temperature will be set for the passenger’s side. MONO is shown in the display. The system controls the temperature, amount and distribution of the air flow automatically and adjusts them according to the driving and weather conditions. Press the AUTO button to switch auto mode on. Note: Avoid adjusting the settings when the vehicle interior is extremely hot or cold. The system adjusts to the current circumstances automatically. For the system to function properly, the side and centre air vents should be fully open. To switch mono mode off Select a temperature for the passenger’s side using the rotary control on the passenger’s side. Mono mode will switch off and MONO disappears from the display. The temperature for the driver’s side will remain unchanged. You can now adjust the driver's and passenger's side temperatures independently of each other. The temperatures are shown in the display. You can set a difference of up to 4ºC (7ºF). Note: At low outside air temperatures, when the system is in auto mode, the air stream will be directed to the windscreen and the side windows as long as the engine is cold. Note: For information on the automatic climate control, on vehicles fitted with a combined Navigation and automatic climate control system, see separate handbook. Note: If you set a difference of greater than 4°C (7ºF), the temperature on the other side will be adjusted so that the difference remains at 4°C (7ºF). Setting the temperature Note: If you set one of the sides to HI or LO, both sides will be set to HI or LO. To switch mono mode back on E70304 Press the MONO button. MONO is shown in the display, and the passenger’s side temperature will be adjusted to the driver’s side temperature. 109 Climate control Blower When you select windscreen defrosting and demisting, A, B and C switch off automatically and the air conditioning switches on. Outside air will flow into the vehicle. You cannot select recirculated air. High speed Low speed The blower speed and the temperature control operate automatically and cannot be adjusted manually. The blower is set to high speed and the temperature to HI. Use the buttons to adjust the blower speed. When you select windscreen defrosting and demisting, the heated screens switch on automatically and switch off after a short time. The blower setting is shown in the display. To return to auto mode, press the AUTO button. To return to auto mode, press the AUTO button. Note: To defrost or demist the rear side windows, set the second row air vents to the defrost or demist position. See Air vents (page 104). Air distribution To adjust air distribution, press the desired button. Any combination of settings can be selected simultaneously. Switching the air conditioning on and off Press the button. A/C OFF or A/C ON is shown in the display. A B C Recirculated air E70308 A Footwell B Face level C Windscreen Press the button to change between outside air and recirculated air. Note: When the system is in auto mode and the interior and exterior air temperatures are quite hot, the system selects recirculated air automatically to maximise cooling of the interior. Once the selected temperature is reached, the system will automatically reselect outside air . Windscreen defrosting and demisting 110 Climate control Switching the automatic climate control on and off Rear air conditioning (triplezone automatic climate control) Note: When switched off, the heating, ventilation and air conditioning system for both front and rear zones are switched off and recirculated air is selected. Note: This is a cooling system only. You can use it to cool the rear. The system will not change the rear setting to a temperature higher than the average of the two front temperature settings. Dual-zone Note: When switched off, you cannot set a temperature for the rear which is lower than the average of the two front temperature settings. Switching between front and rear air conditioning mode E70980 Use the buttons to switch the system on and off. Triple-zone E70313 Press the button. The rear air conditioning symbol and the rear settings will be shown in the display. A When the system is in rear air conditioning mode, you can select a temperature using the rotary control on the driver’s side. E70312 Press button A to switch the system on and off. To return to the front settings, press the button again. If no button is pressed for a few seconds, the system will automatically return to the front settings. 111 Climate control Switching the rear automatic climate control on and off Rear temperature Note: If you set different temperatures for the driver's side and rear, mono mode will be switched off. Note: When you press the MONO button, all three temperature zones will be adjusted to the temperature set for the driver's side. Switching the rear air conditioning on and off A When the system is in rear air conditioning mode, use the button to switch the system on and off. A/C OFF or A/C ON is shown in the display. E70312 When the system is in rear air conditioning mode, press button A to switch only the rear system on and off. Note: When the front air conditioning is switched off, you cannot have rear air conditioning. HEATED WINDOWS AND MIRRORS Rear blower High speed Heated windows Use the heated windows to defrost or demist the windscreen or rear window. Low speed Note: The heated windows operate only when the engine is running. Heated windscreen When the system is in rear air conditioning mode, use the buttons to adjust the blower speed. E72506 The blower setting is shown in the display. Heated rear window When the system is in rear air conditioning mode, press the AUTO button to return to auto mode. In auto mode, the rear blower is automatically controlled. AUTO is shown in the display. E72507 112 Climate control Heated exterior mirrors Note: When the parking heater is activated, exhaust fumes may come from under the sides of the vehicle. This is normal. Electric exterior mirrors are fitted with a heating element that will defrost or demist the mirror glass. They will switch on automatically when you switch the heated rear window on. Note: On vehicles with a manual heating, ventilation and air conditioning system, the heating of the vehicle interior is dependent on the temperature, air distribution and blower control settings. AUXILIARY HEATER To prevent the battery from discharging: Parking heater • WARNING The parking heater must not be operated at filling stations, near sources of combustible vapours or dust or in enclosed spaces. • The parking heater operates independently of the vehicle heater by heating the engine’s coolant circuit. It is fed from the vehicle fuel tank. You can also use it while the vehicle is in motion to help the vehicle heater warm up the interior more quickly. Programming the parking heater Note: The programmed time is the time at which you wish the vehicle to be warm and ready to drive, not the time at which the heater switches on. Used properly, the parking heater provides the following benefits: • • • Once the parking heater has performed one heating cycle, the next programmed heating cycle will only be carried out if you have started the vehicle’s engine in between. After a heating cycle, drive the vehicle for at least the period of the heating cycle. Note: You must programme the times at least 70 minutes in advance of the time you wish to set. It preheats the interior of the vehicle. It keeps the windows clear of ice in the event of frost and prevents condensation. It avoids cold starts and allows the engine to reach operating temperature sooner. Note: You must set the time and date correctly. See Clock (page 128). To programme the heating times: Note: The parking heater will only operate if there is at least 7.5 litres (1.6 gallons) of fuel in the fuel tank and the ambient temperature is below 15°C (59°F). The heater will not operate if the battery is low. Note: The heating depends on the outside air temperature. E70499 113 Climate control Programming the functions Program 1 and Program 2 1. Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. 3. Highlight Park Heater and press the right arrow button. Program 1 [07:55] Monday Tuesday Wednesday Thursday Friday Park Heater Program 1 Program 2 One-Time Active now E74468 1. 2. 3. E74467 • • • The functions Program 1 and Program 2 allow you to programme up to two heating cycles for each day of the week. These times will remain stored and the heater will warm up the vehicle at these times on these days every week. The function One-Time allows you to programme one heating cycle for one specific day. The function Active now automatically switches on the heater. 4. 5. 6. 7. 114 Highlight Program 1 and press the right arrow button. Highlight the day on which the heater should warm up the vehicle. Press the OK button to confirm the selection. A cross appears in the box next to the day to show that this day is selected. Continue in the same way to select all the days on which the heater should warm up the vehicle. To set the time at which the vehicle should be warmed up, highlight the time at the top of the display and press the right arrow button. Press the OK button and the hours flash. Use the up and down arrow buttons to adjust the individual settings and the left and right arrow buttons to move to the next or previous setting. When you have finished, press the OK button again to confirm the selection. Climate control Diesel auxiliary heater (depending on country) Parkheater Program 1 The diesel auxiliary heater (PTC electrical heater) aids in warming the engine and the vehicle interior on vehicles with a diesel engine. It is switched on or off automatically depending on the outside air temperature, the coolant temperature and the alternator load. 07:55 01:12:2006 Fuel operated heater (depending on country) The fuel operated heater aids in warming the engine and the vehicle interior on vehicles with a petrol or diesel engine. It is switched on or off automatically depending on the outside air temperature and the coolant temperature, unless you have deactivated it. When the fuel operated heater is operating, Aux. Heater on is displayed in the information display. See Information displays (page 82). OK = change E74469 You can use the function Program 2 to set a second cycle, for example different times on different days or twice on the same day. The programming procedure is the same as for the function Program 1. Programming the function One-Time To deactivate the fuel operated heater: 1. Highlight One-Time and press the right arrow button. 2. Press the OK button and the hours flash. Use the up and down arrow buttons to adjust the individual settings and the left and right arrow buttons to move to the next or previous setting. 3. When you have finished, press the OK button again to confirm the selection. Active now E70499 Highlight Active now and press the OK button. A cross appears in the box next to the function to show that the heater is activated. 1. Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. To deactivate the heater, highlight Active now and press the OK button again. 115 Climate control Remote start in combination with direct start or timer 3. Highlight Aux. Heater and press the OK button to toggle the heater on and off. A cross appears in the box when the heater is activated. 4. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display. Remote starting The parking heater may be started and switched off from a distance of up to 500 metres (1640 feet) using the supplied remote control transmitter. This range will vary depending upon local conditions and terrain, as well as battery condition. The remote control transmitter will indicate whether or not the signal has been received. The parking heater will operate for a maximum of 50 minutes. E114360 Remote start is integrated with normal heater control. Parking heaters started with direct start or timer functions can be switched off with the remote control transmitter and vice versa. Feedback during starting and switching off Starting The LED on the transmitter illuminates green for about two seconds. This indicates the signal has been received by the vehicle and the heater has started. Hold the transmitter with the antenna upwards and press the ON button for 1 2 seconds. The LED on the transmitter lights up green to confirm the signal has been received. The LED on the transmitter illuminates red for about two seconds. This indicates the signal has been received by the vehicle and the heater has switched off. Switching off Hold the transmitter with the antenna upwards and press the OFF button for 1 - 2 seconds. The LED on the transmitter lights up red to confirm the signal has been received. The LED on the transmitter flashes green or red for about two seconds. This indicates the signal was not transmitted correctly. Repeat the transmission. Note: Transmitter range is dependant upon distance and local conditions such as buildings, etc. The LED on the transmitter illuminates orange for about two seconds before showing green or red. This indicates the transmitter batteries are weak and should be changed. 116 Climate control Programming the transmitter The LED on the transmitter flashes orange for about 5 seconds. This indicates that the signal was not transmitted. The transmitter batteries are discharged and should be changed as soon as possible. Further transmitters may be used with the remote system, please consult your dealer. Up to a maximum of 3 separate remote controls may be added. When adding extra transmitters these must be programmed separately. Changing the remote control battery Note: The heater must be switched off during programming. Make sure that you dispose of old batteries in an environmentally friendly way. Seek advice from your local authority regarding recycling. Note: The programming procedure may be repeated as often as is required. The oldest programmed transmitter will be deleted each time. 1 1. 2. 2 3. 4. E114361 1. Insert a screwdriver or other suitable tool into the slot on the back of the remote control, and unscrew the compartment cover. 5. CAUTION Do not touch the battery contacts or the printed circuit board with the screwdriver. 2. Carefully prise out the battery. 3. Install a new battery (3.3V type CR1-3N) with the + facing upwards. 4. Re-assemble the remote control. 117 Install the battery in the new transmitter. Turn off the power to the receiver by removing fuse F32 from the engine compartment fuse box. See Fuse specification chart (page 194). Wait for at least 5 seconds. Reconnect power to the receiver by replacing the fuse, and press the OFF button on the new transmitter within 5 seconds until the LED light turns off. The new transmitter is now programmed. Seats • SITTING IN THE CORRECT POSITION • • hold the steering wheel with your arms slightly bent. bend your legs slightly so that you can press the pedals fully. position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle. MANUAL SEATS Moving the seats backwards and forwards E68595 WARNINGS Do not adjust the seats when the vehicle is moving. Only when you use the seat belt properly, can it hold you in a position that allows the airbag to achieve its optimum effect. When you use them properly, the seat, head restraint, seat belt and airbags will provide optimum protection in the event of a collision. We recommend that you: • • • • sit in an upright position with the base of your spine as far back as possible. do not recline the seatback more than 30 degrees. adjust the head restraint so that the top of it is level with the top of your head and as far forwards as possible, remaining comfortable. keep sufficient distance between yourself and the steering wheel. We recommend a minimum of 250 millimetres (10 inches) between your breastbone and the airbag cover. E70728 WARNING Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch. 118 Seats Adjusting the lumbar support Adjusting the angle of the seatback E70729 E70731 Adjusting the height of the driver’s seat ELECTRIC SEATS 2-way electric seat 1 1 2 E70730 2 E70733 119 Seats 8-way electric seat 2 2 1 3 1 4 3 4 8 5 7 6 5 8 7 E70734 120 6 Seats HEAD RESTRAINTS REAR SEATS Adjusting the head restraint Second row seats Moving the seats backwards and forwards WARNINGS Raise the rear head restraint when the rear seat is occupied by a passenger. WARNING Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch. When using a forward facing child restraint on a rear seat, always remove the head restraint from that seat. E72644 E71879 Adjust the head restraint so that the top of it is level with the top of your head and as far forwards as possible, remaining comfortable. Removing the head restraint Press the locking buttons and remove the head restraint. 121 Seats Adjusting the seatback E72704 E72645 1. To recline the seatback, pull the lever on the outboard seats or the strap on the centre seat and lean back against the seatback until it reaches the desired position. 2. To raise the seatback, pull the lever up and push the seat cushion forwards using your weight. Easy entry position (vehicles with third row seats only) Note: You can move the outboard seats forwards to allow access to the third row seats. E72706 1. Pull the lever once. Fold the seatback forwards into the position shown and slide the complete seat forwards. When exiting the vehicle from the third row seats, pull the loop on the rear of the second row seat. 2. To return the seat to the seating position, slide the seat backwards. The seat will stop automatically and at a midway position. 122 Seats 3. Fold the seatback up until it engages. 4. To move the seat further back, pull the lever under the front of the seat and slide it backwards. 1. 2. 3. Folding the seatbacks down WARNING 4. When folding the seatbacks down, take care not to get your fingers caught between the seatback and seat frame. 5. 6. Lower the head restraints. See Head restraints (page 121). Slide the seats backwards as far as they will go. Insert the centre seat belt into the retainer in the roof. See Fastening the seat belts (page 29). On the outboard seats, pull the lever and fold the seatback into a sloped position. Pull the lever again and fold down the seatback. On the centre seat, pull the loop between the seat cushion and the seatback and fold down the seatback. To engage the seatbacks in the folded position, pull the lever or loop again and push the seatback firmly down until it latches into position. To return the seat to the seating position, pull the lever or loop and fold the seatback up until it engages. Third row seats WARNING Do not sit in a third row seat when the second row seat in front of it is folded flat. E72705 Moving the seats backwards and forwards (Galaxy) WARNING Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch. E72646 123 Seats Folding the seats flat WARNING When folding the seatbacks down, take care not to get your fingers caught between the seatback and seat frame. 1 E72647 Adjusting the seatback (Galaxy) 1 E72707 A 3 B E75381 1. To recline the seatback, pull the strap and lean back against the seatback until it reaches the desired position. 2. To raise the seatback, pull the strap and let the seatback return to the upright position. 2 E72648 124 Seats 1. 2. 3. 4. 5. Pull the loop at the rear of the seat cushion and fold the seat cushion forwards until it lies flat on the floor (1). Grasp the grip (A) and pull the loop (B) at the base of the seatback upwards and rearwards (2). Fold the seatback down flat to the floor using the grip (3). To return the seat to the seating position, grasp the grip and pull the seatback upwards and then rearwards. Fold the seat cushion back. 2 1 Creating a level load floor CAUTION When transporting a load with the seats folded flat, always fold the relevant carpeted cover forwards to cover the folded seats. 3 E72649 1. Turn the retainers on the rear of the third row seatbacks anti-clockwise through 90 degrees to release the carpeted cover. 2. Fold it forwards to cover up the folded seats. 3. To fix the cover back onto the seatbacks, fold it back and push the retainers into the seatback until they click into place. Note: When only the third row seats are folded flat, fold the covers forwards to cover up the base of the second row seats. The smaller flaps at the front of the cover should stand vertically against the second row seatbacks. 125 Seats HEATED SEATS VENTILATED SEATS CAUTION CAUTION Operating this function with the engine off will drain the battery. Operating this function with the engine off will drain the battery. E70601 E70601 E71224 E70602 Note: The settings are stored when you switch off the ignition. Note: The settings are stored when the ignition is switched off. Note: When the seat is being ventilated, the heater may switch on automatically. This is to prevent the flow of air becoming uncomfortably cool. 126 Seats Note: The air in the vehicle interior is used to ventilate the seats. The cooling effect therefore depends on the temperature of the vehicle interior. Switch on the air conditioning if necessary and set the air distribution to footwell. See Climate control (page 104). FRONT SEAT ARMREST 1 3 2 E95256 127 Convenience features Roof (S-Max) SUN BLINDS Side windows A A E74807 To release the blind, press the button. INSTRUMENT LIGHTING DIMMER E74809 Pull the blind up and attach it to the hooks (A). Roof (Galaxy) E70723 CLOCK E74808 Note: Some navigation systems will automatically set the date and time on the clock using GPS signals. Note: See General information (page 82). 1. From the main menu, select the clock function. 2. Select the option required. 3. Press OK. 128 Convenience features 4. Using the right, left, up and down arrow buttons, select and change the value. 5. Press OK. ASHTRAY Front ashtray CIGAR LIGHTER CAUTIONS If you use the socket when the engine is not running, the battery may discharge. E72974 Do not hold the cigar lighter element pressed in. To empty, pull out the complete ashtray. Rear ashtray Note: Switch the ignition on to use the cigar lighter. You can also use it for up to 30 minutes after you have switched the ignition off. Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 15 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets. E73705 To remove the ashtray, open it, press it down against the spring and remove it. AUXILIARY POWER SOCKETS E72972 Press the element in to use the cigar lighter. It will pop out automatically. CAUTION If you use the socket when the engine is not running, the battery may discharge. Note: You can use the socket when the ignition is switched off. 129 Convenience features Seat back trays Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 15 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets. WARNING Do not use the trays when the vehicle is moving. Make sure that you secure the trays in the lowered position before setting off. S-Max E74130 Galaxy E72630 GLOVE BOX Cooled glove box Note: You can cool the glove box using air from the air conditioning system. E72977 CUP HOLDERS WARNING Do not place hot drinks in the cup holders when the vehicle is moving. E70885 130 Convenience features STORAGECOMPARTMENTS WARNING Do not drive with any storage compartment lid open. Make sure that you secure the lid before setting off. CAUTION Do not keep heat-sensitive items and liquids in any storage compartment. Front storage compartments E73704 E72978 E72905 E72980 131 E72905 Convenience features Under seat storage compartment 1 E73067 2 Rear storage compartment E72981 Overhead storage compartments WARNING Do not place heavy objects in the overhead storage compartments. CAUTION Do not exceed the maximum permissible loads of 1 kilogramme (2.2 pounds) for the smaller compartment and 2 kilogrammes (4.4 pounds) for the larger compartment. E72982 132 Convenience features Under floor storage compartment MAP POCKETS WARNING When you are using a child restraint with a support leg on a second row seat, make sure that you locate the support leg securely on the under floor storage compartment lid. Make sure that you install the foam spacer correctly inside the storage compartment and that you position the lid correctly. E74686 SEAT BACK TRAYS WARNING Do not use the trays when the vehicle is moving. Make sure that you secure the trays in the lowered position before setting off. E72585 E72630 133 Convenience features GLASSES HOLDER A B E75193 E86768 MEMORY FUNCTION A Seat adjustment controls See Electric seats (page 119). WARNINGS Before activating the seat memory, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts. B Memory pre-set buttons Up to four different driver's seat and exterior mirror positions can be stored in the memory. Your preferred setting for the reverse mirror dipping feature can also be stored. See Electric exterior mirrors (page 73). Do not use the memory store function when the vehicle is moving. Setting a memory pre-set Passive setting The vehicle stores the seating and mirror positions for up to four remote controls or passive keys. Next time the vehicle is unlocked, the position of the seat and mirrors will adjust to the last used position. Each time you turn the ignition off, the current seat and mirror settings are stored on the remote control or passive key used. Active setting 1. Turn the ignition on. 2. Adjust the seat and exterior mirrors to the desired position. 134 Convenience features 3. Press and hold the desired pre-set button B until a single chime sounds to confirm. CD CHANGER This is located under the front passenger seat. Recalling a stored seat position Note: To stop seat movement during a recall, press any driver seat adjustment control, any of the memory buttons or any mirror control switch. Seat movement will also stop if you move the vehicle. AUXILIARY INPUT (AUX IN) SOCKET Passive recall Note: If more than one passive key is in range, the memory function will move to the settings of the first key stored. When you unlock the vehicle with the remote control or pull the driver door handle with a passive key in range, the seat and mirrors will move to the position stored on that remote control or passive key. Active recall E71969 Press the pre-set button associated with the desired driving position. The seat and mirrors will move to the position stored on that pre-set. See separate audio handbook. CHILDMINDER MIRROR E75192 135 Convenience features USB PORT E104423 See Connectivity (page 268). 136 Starting the engine II The ignition is switched on. All electrical circuits are operational. Warning lamps and indicators illuminate. This is the key position when driving. You must also select it when being towed. GENERAL INFORMATION General points on starting If the battery has been disconnected the vehicle may exhibit some unusual driving characteristics for approx. 8 kilometres (5 miles) after reconnecting the battery. III The starter motor is activated. Release the key as soon as the engine starts. This is because the engine management system must realign itself with the engine. Any unusual driving characteristics during this period may be disregarded. STEERING WHEEL LOCK WARNING Always check that the steering is unlocked before attempting to move your vehicle. Starting the engine by towing or pushing WARNING Vehicles without keyless starting To prevent damage you must not push or tow start your vehicle. Use booster cables and a booster battery. See Using booster cables (page 220). To activate the steering wheel lock; 1. Remove the key from the ignition switch. 2. Turn the steering wheel. IGNITION SWITCH Vehicles with keyless starting WARNING Your vehicle has an electronically controlled steering wheel lock. This operates automatically. Never return the key to position 0 or I when the vehicle is in motion. The steering wheel lock is activated if the ignition is off, the engine not running and your vehicle is stationary. The steering wheel lock is deactivated when the ignition is switched on. STARTING A PETROL ENGINE E72128 Note: You can only operate the starter for a maximum of 30 seconds at a time. 0 The ignition is off. I The ignition and all main electrical circuits are disabled. Note: Do not leave the ignition key in this position for too long to avoid discharging the battery. 137 Starting the engine Cold or hot engine 2. Fully depress the accelerator pedal and hold it there. 3. Start the engine. All vehicles CAUTION Vehicles with automatic transmission When the temperature is below -20ºC (-4ºF), switch the ignition on for at least one second before starting the engine. This will make sure that the maximum fuel pressure is established for starting the engine. 1. Select park or neutral. 2. Fully depress the accelerator pedal and hold it there. 3. Fully depress the brake pedal. 4. Start the engine. Vehicles with manual transmission All vehicles Note: Do not touch the accelerator pedal. If the engine does not start, repeat the Cold or hot engine procedure. 1. Fully depress the clutch pedal. 2. Start the engine. Engine idle speed after starting Vehicles with automatic transmission The speed at which the engine idles immediately after starting will vary depending on the engine temperature. Note: Do not touch the accelerator pedal. If the engine is cold then the idle speed will automatically be increased in order to heat the catalytic converter as quickly as possible. This ensures that vehicle emissions are kept to an absolute minimum. 1. Select park or neutral. 2. Fully depress the brake pedal. 3. Start the engine. All vehicles The idle speed will slowly decrease to the normal level as the catalytic converter warms up. If the engine does not start within 15 seconds, wait for a short period and try again. If the engine does not start after three attempts, wait 10 seconds and follow the Flooded engine procedure. STARTING A PETROL ENGINE - E85 If you have difficulty starting the engine when the temperature is below -25ºC (-13ºF), press the accelerator pedal between ¼ to ½ of its travel and try again. For general information on starting a petrol engine. See Starting a petrol engine (page 137). Flooded engine Vehicles with manual transmission 1. Fully depress the clutch pedal. 138 Starting the engine Starting at low ambient temperatures If the battery has been disconnected or after the fuel type has been changed, the idle speed may be irregular. This will improve after 10 to 30 seconds. When the temperature is lower than -10°C (14°F) and the vehicle is filled with E85, an engine block heater should be used to facilitate starting. See Engine heater (page 140). Failure to do this will result in a non start. STARTING A DIESEL ENGINE Cold or hot engine If the temperature is expected to remain below -10°C (14°F), it is recommended that you increase the proportion of petrol in the tank by topping up with 95 octane unleaded petrol if the tank is not already full. About 10 litres (2.2 gallons) of petrol will reduce the proportion of E85 in a ¾ full tank from 85% to 70% and will considerably improve cold start capability. All vehicles Note: When the temperature is below -15ºC (5ºF), you may need to crank the engine for up to 25 seconds. If you consistently operate the vehicle in such temperatures, we recommend that you have an engine block heater fitted. Note: Continue cranking the engine until it starts. If, at very low temperatures, the tank is filled with only E85 and there is no way to use an engine block heater, you may experience difficulties starting the engine. Note: You can only operate the starter for a maximum of 30 seconds at a time. Switch the ignition on and wait until the glow plug indicator goes off. If the engine fails to start, proceed as follows: 1. Fully depress the accelerator pedal. 2. Turn the ignition key to position III. Vehicles with manual transmission Note: Do not touch the accelerator pedal. CAUTION Release the ignition key as soon as the engine has started. 1. Fully depress the clutch pedal. 2. Start the engine. 3. Gradually release the accelerator pedal after 5 seconds of engine cranking or as the engine speed rises. Vehicles with automatic transmission If the engine fails to start, repeat steps 1, 2 and 3, or connect an engine block heater for two hours before attempting another start. 1. Select park or neutral. 2. Fully depress the brake pedal. 3. Start the engine. During starting, the fuel injectors are turned off as long as the accelerator pedal is depressed. This can be used to drain excessive fuel from the intake manifold after several unsuccessful starting attempts. 139 Starting the engine DIESEL PARTICULATE FILTER (DPF) SWITCHING OFF THE ENGINE The DPF forms part of the emissions reduction systems fitted to your vehicle. It filters harmful diesel particulates (soot) from the exhaust gas. Vehicles with a turbocharger CAUTION Do not switch the engine off when it is running at high speed. If you do, the turbocharger will continue running after the engine oil pressure has dropped to zero. This will lead to premature turbocharger bearing wear. Regeneration WARNING Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The DPF regeneration process creates very high exhaust gas temperatures and the exhaust will radiate a considerable amount of heat during and after DPF regeneration, and after you have switched the engine off. This is a potential fire hazard. Release the accelerator pedal. Wait until the engine has reached idle speed and then switch it off. ENGINE HEATER CAUTION Make sure you disconnect the power cable from the engine heater connector before driving away. Unlike a normal filter which requires periodic replacement, the DPF has been designed to regenerate, or clean itself to maintain operating efficiency. The regeneration process takes place automatically. However, some driving conditions mean that you may need to support the regeneration process. Note: The engine heater connector is located in the radiator grille at the front of your vehicle. If you drive only short distances or your journeys contain frequent stopping and starting, occasional trips with the following conditions could assist the regeneration process: • • • Drive your vehicle, preferably on a main road or motorway, for up to 20 minutes avoiding prolonged idling, but always observing speed limits and road conditions. Do not switch off the ignition. Use a lower gear than normal to maintain a higher engine speed during this journey, where appropriate. E97918 Connect the engine heater for 2 to 3 hours before starting the engine. 140 Fuel and refuelling SAFETY PRECAUTIONS CAUTIONS Do not use leaded petrol or petrol with additives containing other metallic compounds (e.g. manganese-based). They could damage the emission system. WARNINGS Stop refuelling after the fuel nozzle stops the second time. Additional fuel will fill the expansion space in the fuel tank which could lead to fuel overflowing. Fuel spillage could be hazardous to other road users. Do not use methanol instead of E85. Do not use any kind of flames or heat near the fuel system. The fuel system is under pressure. There is a risk of injury if the fuel system is leaking. Note: We recommend that you use only high quality fuel without additives or other engine treatments. Note: When using E85, you may experience a higher fuel consumption. FUEL QUALITY - PETROL Note: Your vehicle will operate well on commercial quality 95 octane unleaded petrol, but only high quality E85 offers the same protection and performance. Note: We recommend that you use only high quality fuel without additives or other engine treatments. Use minimum 95 octane unleaded petrol that meets the specification defined by EN 228, or equivalent. You can also use a mixture of unleaded petrol and E85. CAUTION Do not use leaded petrol or petrol with additives containing other metallic compounds (e.g. manganese-based). They could damage the emission system. Long-term storage Use minimum 95 octane unleaded petrol that meets the specification defined by EN 228, or equivalent. Due to small amounts of corrosive impurities that may be found in the E85, it is recommended that you fill the tank with only 95 octane unleaded petrol prior to long-term storage of your vehicle. FUEL QUALITY - E85 FUEL QUALITY - DIESEL WARNING WARNINGS Do not modify the fuel system configuration or the components in the system. Do not mix diesel with oil, petrol or other liquids. This could cause a chemical reaction. Do not replace the fuel system or the components with parts not specially designed to be used with CAUTIONS Do not add kerosene, paraffin or petrol to diesel. This could cause damage to the fuel system. E85. 141 Fuel and refuelling CAUTIONS Use diesel that meets the specification defined by EN 590, or the relevant national specification. CAUTIONS Do not run the engine when a spark plug lead is disconnected. Do not push-start or tow-start your vehicle. Use booster cables. See Using booster cables (page 220). Note: We recommend that you use only high quality fuel. Do not switch the ignition off when driving. Note: The use of additives or other engine treatments not approved by Ford is not recommended. FUEL FILLER FLAP Note: We do not recommend the prolonged use of additives intended to prevent fuel waxing. Note: Central locking also locks and unlocks the fuel filler flap. See Locking and unlocking (page 37). Long-term storage Note: It is normal to hear a hissing noise when you remove the filler cap. Most diesel fuels contain bio-diesel, it is recommended to fill the tank with purely mineral diesel (where available) or add an anti-oxidant prior to long-term storage of your vehicle exceeding two months. Your dealer can help you with a suitable anti-oxidant. CATALYTIC CONVERTER WARNING 1 Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The exhaust will radiate a considerable amount of heat during use, and after you have switched the engine off. This is a potential fire hazard. E94744 3 Driving with a catalytic converter CAUTIONS Avoid running out of fuel. 2 Do not crank the engine for long periods. E73225 142 Fuel and refuelling To close, turn the cap clockwise until it clicks. After refuelling, allow 5 minutes of normal engine operation above 48 km/h (30 mph) to reduce the risk of an increased engine restart time. REFUELLING FUEL CONSUMPTION CAUTION Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immediately. The CO2 and fuel consumption figures are derived from laboratory tests according to EEC Directive 80/1268/EEC and subsequent amendments and are carried out by all vehicle manufacturers. They are intended as a comparison between makes and models of vehicles. They are not intended to represent the real world fuel consumption you may get from your vehicle. Real world fuel consumption is governed by many factors including; driving style, high speed driving, stop/start driving, air conditioning usage, the accessories fitted and towing etc. REFUELLING - E85 CAUTION Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immediately. Your Ford dealer can give you advice on improving your fuel consumption. TECHNICAL SPECIFICATIONS S-MAX Fuel consumption figures Urban Extra-urban Combined CO2 emissions l/100 km (mpg) l/100 km (mpg) l/100 km (mpg) g/km 2.0L Duratec-HE Stage IV (107 kW) 11.0 (25.7) 6.4 (44.1) 8.1 (34.9) 194 2.0L Duratec-HE Stage V (107 kW) 11.3 (25.0) 6.4 (44.1) 8.2 (34.5) 189 2.3L Duratec-HE (118 kW), 6-speed automatic transmission 13.7 (20.6) 7.4 (38.2) 9.7 (29.1) 232 Variant 143 Fuel and refuelling Urban Extra-urban Combined CO2 emissions l/100 km (mpg) l/100 km (mpg) l/100 km (mpg) g/km 2.5L Duratec, Durashift 6speed manual transmission 13.3 (21.2) 7.1 (39.8) 9.4 (30.1) 224 Variant 1.8L Duratorq-TDCi 7.9 (35.8) 5.2 (54.3) 6.2 (45.6) 164 2.0L Duratorq-TDCi, Durashift 6-speed manual transmission 7.7 (36.7) 5.0 (56.5) 6.0 (47.1) 159 2.0L Duratorq-TDCi (100 kW), 6-speed automatic transmission 9.7 (29.1) 5.7 (49.6) 7.2 (39.2) 189 2.2L Duratorq-TDCi, Durashift 6-speed manual transmission 9.0 (31.4) 5.2 (54.3) 6.6 (42.8) 176 Urban Extra-urban Combined CO2 emissions l/100 km (mpg) l/100 km (mpg) l/100 km (mpg) g/km 2.0L Duratec-HE Stage IV (107 kW) 11.2 (25.2) 6.5 (43.5) 8.2 (34.5) 197 2.0L Duratec-HE Stage V (107 kW) 11.3 (25.0) 6.4 (44.1) 8.2 (34.5) 189 2.3L Duratec-HE (118 kW), 6-speed automatic transmission 13.8 (20.5) 7.5 (37.7) 9.8 (28.8) 235 1.8L Duratorq-TDCi (92 kW), Durashift 6-speed manual 8.0 (35.3) 5.3 (53.3) 6.3 (44.8) 166 1.8L Duratorq-TDCi 8.0 (35.3) 5.2 (54.3) 6.2 (45.6) 165 Galaxy Fuel consumption figures Variant 144 Fuel and refuelling Urban Extra-urban Combined CO2 emissions l/100 km (mpg) l/100 km (mpg) l/100 km (mpg) g/km 2.0L Duratorq-TDCi, Durashift 6-speed manual transmission 7.7 (36.7) 5.0 (56.5) 6.0 (47.1) 159 2.0L Duratorq-TDCi (100 kW), 6-speed automatic transmission 9.7 (29.1) 5.7 (49.6) 7.2 (39.2) 189 2.2L Duratorq-TDCi, Durashift 6-speed manual transmission 9.1 (31.0) 5.3 (53.3) 6.7 (42.2) 179 Variant 145 Transmission MANUAL TRANSMISSION AUTOMATICTRANSMISSION All vehicles Selector lever positions CAUTIONS Do not engage reverse gear when the vehicle is moving. This can cause damage to the transmission. Do not apply any undue lateral force to the gear lever when changing from 5th to 4th gear. This could lead to the inadvertent selection of 2nd gear and can cause damage to the transmission. S Selecting reverse gear On some vehicles it is necessary to raise the collar whilst selecting reverse gear. E80836 P Park R Reverse N Neutral D Drive S Sport mode and manual shifting WARNING Apply the brakes before moving the selector lever and keep them applied until you are ready to move E99067 off. Note: A cold engine has a higher idle speed. This will increase the tendency for your vehicle to creep when you have selected a drive gear. Press the button on the selector lever to select reverse and park. The selector lever position will be shown in the information display. 146 Transmission Park Sport mode and manual shifting WARNINGS Select park only when your vehicle is stationary. 1 Apply the parking brake and select park before leaving your vehicle. Make sure that the selector lever is latched in position. S Note: An audible warning will sound if you open the driver's door and you have not selected park. 2 In this position, power is not transmitted to the drive wheels and the transmission is locked. You can start the engine with the selector lever in this position. E80837 S Note: A shift will occur only when the vehicle speed and the engine speed are appropriate. Reverse WARNING Note: When you select position S, a gear change may occur depending on the accelerator pedal position in relation to actual vehicle speed. Select reverse only when your vehicle is stationary and the engine is at idle speed. Activate sport mode by moving the selector lever to position S. Sport mode will remain active until you shift manually up or down the gears. Neutral In this position, power is not transmitted to the drive wheels but the transmission is not locked. You can start the engine with the selector lever in this position. Select manual shifting to shift manually through the forward gears. Push the selector lever forwards to shift down and pull it backwards to shift up. Drive Drive modes Select drive to shift automatically through the forward gears. The transmission will select the appropriate gear for optimum performance based on ambient temperature, road gradient, vehicle load and driver input. Hints on driving with an automatic transmission Moving off 1. 147 Release the parking brake. Transmission 2. Release the brake pedal and press the accelerator pedal. 3 Stopping 1. Release the accelerator pedal and press the brake pedal. 2. Apply the parking brake. 4 Kickdown 2 1 Press the accelerator pedal fully with the selector lever in the drive position to select the next lowest gear for optimum performance. Release the accelerator pedal when you no longer require kickdown. Emergency park position release lever Use the lever to move the selector lever from the park position in the event of an electrical malfunction or if your vehicle has a flat battery. E81705 1. 2. 3. 4. 5. Insert a small flat-bladed tool into the slot. Turn the tool through 90 degrees. Push downwards on the tool to detach the gaiter frame from the trim panel. Push downwards on the gaiter frame to release the lever and move the selector lever from the park position. Pull upwards on the gaiter until the gaiter frame engages in the trim panel. Note: If position P is selected again, this procedure must be repeated. 148 Brakes PRINCIPLE OF OPERATION PARKING BRAKE Disc brakes Applying the parking brake Wet brake discs result in reduced braking efficiency. Dab the brake pedal when driving from a car wash to remove the film of water. ABS WARNING The ABS does not relieve you of your responsibility to drive with due care and attention. The ABS helps you to maintain full steering and directional stability when you brake heavily in an emergency, by preventing the road wheels from locking. HINTS ON DRIVING WITH ABS When the ABS is operating, the brake pedal will pulse. This is normal. Maintain pressure on the brake pedal. E73224 The ABS will not eliminate the dangers inherent when: • you drive too close to the vehicle in front of you. • the vehicle is aquaplaning. • you take corners too fast. • the road surface is poor. WARNING Make sure that the parking brake is applied before you release the lever. Note: Do not press the release button when you apply the parking brake. 1. Press the brake pedal firmly. 2. Pull the parking brake lever upwards to its fullest extent. 149 Brakes Parking on a hill Parking on a hill If you have to park facing uphill, select first gear and turn the front wheels away from the kerb. If you have to park facing downhill, select reverse gear and turn the front wheels towards the kerb. If you have to park facing uphill, select first gear and turn the front wheels away from the kerb. If you have to park facing downhill, select reverse gear and turn the front wheels towards the kerb. Releasing the parking brake Applying the EPB 1. Press the brake pedal firmly. 2. Pull the parking brake lever upwards slightly, press the release button and push the lever downwards. ELECTRIC PARKING BRAKE (EPB) The electric parking brake (EPB) replaces the conventional handbrake. It is operated by a switch located in the centre console. WARNINGS Always apply the EPB and select first or reverse gear before leaving the vehicle. E70528 Pull up the switch once to apply the EPB. The brake system warning lamp illuminates to confirm that the EPB is now applied. Vehicles with automatic transmission should always be left with the selector lever in position P. Note: The brake system warning lamp will remain illuminated for a short period if you turn the ignition to position 0 or remove the key. Note: Under certain conditions for example on a steep hill, when the vehicle has been parked with the EPB applied, the EPB performs an automatic re-clamp function. This will occur approximately three minutes after the EPB has been applied. Automatic application of the EPB WARNING The EPB will not automatically apply on vehicles with a keyless start or keyless entry system. You must apply the EPB using the EPB switch. Note: You may notice various noises when the EPB is applied and released. This is normal and no cause for concern. When you turn the ignition off, the cluster will remain on for several minutes. 150 Brakes Applying the EPB when the vehicle is moving The EPB will automatically apply when you remove the key from the ignition during this period. WARNING Preventing automatic application of the EPB With the exception of emergency conditions (for example, the brake pedal does not work or is blocked), do not apply the EPB while the vehicle is moving. On bends, on poor road surfaces or weather conditions, emergency braking can cause the vehicle to skid out of control or off the road. WARNINGS Do not leave the vehicle if you have not applied the EPB. Remember that if you press down the switch while removing the key from the ignition (on vehicles with a keyless entry system, when pulling the ignition switch out), the EPB will not be applied. If you apply the EPB while the vehicle is moving, the brake system warning lamp illuminates and a warning chime will sound. Make sure that the vehicle’s wheels are securely wedged if you park the vehicle with the EPB released to prevent it from rolling away. At speeds above 6 km/h (4 mph), the braking force is applied as long as you hold the switch in the on position. The EPB will be applied until you release or press down the switch, or press the accelerator pedal further. Releasing the EPB Automatic release - drive away release (DAR) Note: On vehicles with automatic transmission, the driver's door must be closed and the driver's seatbelt must be fastened before the DAR will operate. Note: If the EPB warning lamp stays illuminated the EPB will not automatically release. You must release the EPB using the EPB switch. E70529 Hold the switch pressed while you switch off the ignition or while you remove the key from the ignition. Note: The engine must be running and the accelerator pedal must be pressed before the DAR will operate. WARNING If you prevented the EPB from applying while turning off the ignition, it will remain off when you remove the key. Note: The clutch pedal must be fully depressed before the DAR will operate. Engage first or reverse gear, move off as normal using the accelerator and clutch pedals and the EPB will be automatically released. 151 Brakes Moving off with a trailer (vehicles with manual transmission) The brake system warning lamp will go off to confirm that the EPB has been released. Depending on the gradient and the weight of the trailer, the vehicle and trailer may roll backwards slightly when you move off on a slope. To prevent this happening, deactivate the DAR and release the EPB manually as follows: Note: On vehicles with manual transmission, if the gear lever is in neutral when you release the clutch pedal and depress the accelerator pedal, the EPB will be released automatically. Note: The EPB also makes moving off on a slope easier and prevents the vehicle from rolling in an undesired direction. The brakes are released automatically once the clutch is engaged and the engine has developed sufficient drive to prevent the vehicle from rolling down the slope. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space. 1. Pull up the switch and hold it in this position. 2. Move off as normal and then press down the switch when you notice that the engine has developed sufficient driving force. Cut in the power supply WARNING You will not be able to apply or release the EPB if there is a cut in the power supply, for example a flat battery, failure of the alternator or vehicle electronics. Manual release Note: To release the EPB, the ignition must be in position II. If the battery is flat, use booster cables and a booster battery. See Using booster cables (page 220). E70529 Hold the brake pedal depressed and press down the switch. The brake system warning lamp will go off to confirm that the EPB has been released. 152 Stability control PRINCIPLE OF OPERATION Stability control (ESP) warning lamp Electronic stability programme (ESP) The ESP warning lamp will flash when the system is operating. See Warning lamps and indicators (page 79). WARNING Emergency brake assist ESP does not relieve you of your responsibility to drive with due care and attention. WARNING Emergency brake assist does not relieve you of your responsibility to drive with due care and attention. Emergency brake assist will detect when you brake heavily by measuring the rate at which you press the brake pedal. It will provide maximum braking efficiency as long as you press the pedal. Emergency brake assist can reduce stopping distances in critical situations. B B USING STABILITY CONTROL B A A B A Press and hold the switch for one second. The switch will illuminate. A message will be shown in the display. See Information messages (page 95). E72903 A without ESP B with ESP Press the switch again to turn the system on. The system will be switched on automatically every time you switch the ignition on. The ESP supports stability when the vehicle starts to slide away from your intended path. This is performed by braking individual wheels and reducing engine torque as needed. The system also provides an enhanced traction control function by reducing engine torque if the wheels spin when you accelerate. This improves your ability to pull away on slippery roads or loose surfaces, and improves comfort by limiting wheel spin in hairpin bends. 153 Hill start assist PRINCIPLE OF OPERATION The system makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When the system is active, the vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal. During this time, you have time to move your foot from the brake to the accelerator pedal and pull away. The brakes are released automatically once the engine has developed sufficient drive to prevent the vehicle from rolling down the slope. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space. E70499 Hill Launch Off Auto Manual WARNING The system does not replace the parking brake. When you leave the vehicle, always apply the parking brake and select first or reverse gear. USING HILL START ASSIST E74629 The HLA can operate in either automatic or manual mode. If you select automatic mode, the HLA is activated automatically when the vehicle is on a slope and you press the brake pedal. If you select manual mode, you must activate the HLA using the brake pedal. 1. To set the HLA mode: 3. 2. 4. 5. 154 Press the right arrow button on the steering wheel to enter the main menu. Highlight Setup with the up and down buttons and press the right arrow button. Highlight Hill Launch and press the right arrow button. Highlight the desired setting and press the OK button to confirm the setting. If Off is selected, the HLA is switched off and cannot be activated either automatically or manually. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display. Hill start assist Note: When HLA is in manual activation mode, only use the HLA when pulling away uphill on gradients greater than 3%. If the vehicle is on the flat or on a downhill slope, an active HLA will make it difficult to pull away smoothly. 1. Press the brake pedal to bring the vehicle to a complete standstill. Keep the brake pedal depressed. 2. If the sensors detect that the vehicle is on a slope and the right driving direction is selected (first gear if the vehicle is pointing uphill, reverse gear if the vehicle is pointing downhill), the HLA will be activated automatically. Hill Launch Assist active is displayed in the information display. 3. When you remove your foot from the brake pedal, the vehicle will remain on the slope without rolling away for approximately two to three seconds. 4. Drive off in the normal manner. The brakes will be released automatically. Activating the HLA WARNINGS You must remain in the vehicle once you have activated the HLA. Any attempt to leave the vehicle will deactivate the HLA automatically. The HLA is active only if the message Hill Launch Assist active is displayed in the information display. During all times you are responsible for controlling the vehicle, supervising the HLA and intervening, if required. To activate the HLA in manual mode: 1. Press the brake pedal to bring the vehicle to a complete standstill. Keep the brake pedal depressed. 2. Quickly jab the brake pedal further until you hear a chime and Hill Launch Assist active is displayed in the information display. The HLA is now active. 3. When you remove your foot from the brake pedal, the vehicle will remain on the slope without rolling away for approximately two to three seconds. 4. Drive off in the normal manner. The brakes will be released automatically. You can activate the HLA only if the following conditions have been met: • • • • • • The engine is running. The HLA is switched on (automatic or manual mode). The parking brake or electric parking brake (EPB) is fully disengaged. On vehicles with manual transmission, the clutch pedal is pressed. On vehicles with automatic transmission, the driver's door is closed. No failure mode is present. To activate the HLA in automatic mode: 155 Hill start assist WARNING When HLA is active and the system detects a malfunction, the HLA is deactivated and the message Please use park brake! followed by Hill Launch A .not available is displayed in the information display. The vehicle is still safe to be driven and can be repaired during the next service. The message Hill Launch A. not available is also displayed in the information display with manual activation during a malfunction or if one of the activation criteria is not met. If you have switched the HLA off, no messages will be displayed. Deactivating the HLA To deactivate the HLA, perform one of the following: • • • • Apply the parking brake or electric parking brake (EPB) . Wait for two to three seconds until the HLA deactivates automatically. If a forward gear was selected when the HLA became active, select reverse gear. If reverse gear was selected when the HLA became active, select a forward gear. Hill Launch Assist off is displayed in the information display. 156 Active suspension System malfunction PRINCIPLE OF OPERATION The active suspension system will switch off automatically if it malfunctions. The suspension will be set to a fail-safe condition that will enable you to continue driving but you will not be able to change the suspension setting. Have this checked as soon as possible. The active suspension provides improved handling, comfort and stability by continuously adjusting the damper properties to the current road and driving conditions. This system in conjunction with the ABS system offers the benefit of potentially shorter stopping distances on rough road surfaces. Depending on your preferences and driving style, you can choose between three different settings: Comfort This provides a softer driving feel. Normal Normal setting. Sport This provides a harder, sportier ride. USING ACTIVE SUSPENSION Selecting a setting Note: After you select a setting, you may not immediately notice a difference in the vehicle's handling. The effect of the continuously controlled damping depends on the road surface and driving conditions. E70475 You can change the setting while driving. 157 Parking aid Note: The parking aid may emit false tones if it detects a signal using the same frequency as the sensors or if the vehicle is fully laden. PRINCIPLE OF OPERATION WARNING The parking aid does not relieve you of your responsibility to drive with due care and attention. Note: The outer sensors may detect the side walls of a garage. If the distance between the outer sensor and the side wall remains constant for three seconds, the tone will switch off. As you continue, the inner sensors will detect rearward objects. CAUTIONS Vehicles fitted with a trailer tow module not approved by us may not correctly detect obstacles. USING THE PARKING AID The sensors may not detect objects in heavy rain or other conditions that cause disruptive reflections. Switching the parking aid on and off The sensors may not detect objects with surfaces that absorb ultrasonic waves. Note: The parking aid switches off automatically when you start the engine or when you exceed 16 km/h (10 mph). The parking aid does not detect obstacles moving away from the vehicle. They will only be detected shortly after they start to move towards the vehicle again. Note: The front and rear sensors are always activated or deactivated together. The parking aid is per default off. To switch the parking aid on, press the switch in the instrument panel or select reverse gear. Take particular care when reversing with a tow ball arm or rear fitted accessories e.g. a bicycle carrier, as the rear parking aid will only indicate the distance from the bumper to the obstacle. The light in the switch illuminates when the parking aid is activated. To turn it off, press the switch again. If you use a high pressure spray to wash your vehicle, only spray the sensors briefly from a distance not less than 20 centimetres (8 inches). Manoeuvring with the parking aid Note: On vehicles fitted with a tow ball arm, the parking aid is deactivated automatically when any trailer lamps (or lighting boards) are connected to the 13-pin socket via a trailer tow module we have approved. Note: Keep the sensors free from dirt, ice and snow. Do not clean with sharp objects. E72902 158 Parking aid Note: If a high pitch warning tone sounds for three seconds and the light in the switch is flashing, it indicates a malfunction. The system will be disabled. Have the system checked by properly trained technicians. You will hear an intermittent tone at a distance of up to approximately 150 centimetres (59 inches) between the obstacle and rear bumper, 80 centimetres (31 inches) between the obstacle and front bumper and 50 centimetres (20 inches) to the side. Decreasing the distance accelerates the intermittent tone. A continuous tone will start at a distance of less than 30 centimetres (12 inches). You will hear an alternating tone from the front and rear if obstacles are closer than 30 centimetres (12 inches) to the front and rear bumpers. 159 Cruise control Press the SET+ switch or the SETswitch to store and maintain your current speed. The cruise control indicator illuminates. PRINCIPLE OF OPERATION Cruise control allows you to control your speed using the switches on the steering wheel. You can use cruise control when you exceed 30 km/h (20 mph). Changing the set speed WARNING USING CRUISE CONTROL When you are going downhill, your speed may increase above the set speed. The system will not apply the brakes. Change down a gear and press the RES switch to assist the system in maintaining the set speed. WARNING Do not use cruise control in heavy traffic, on twisty roads or when the road surface is slippery. Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. Switching cruise control on Press the SET+ switch or the SETswitch to accelerate or decelerate. Cancelling the set speed E70612 Setting a speed E70614 Press the brake pedal or the CAN switch. The system will no longer control your speed. The cruise control indicator will go off but the system will retain the speed that you previously set. E70615 160 Cruise control Resuming the set speed E70616 Press the RES switch. The cruise control indicator illuminates and the system will attempt to resume the speed that you previously set. Switching cruise control off E70613 Press the OFF switch. The system will not retain the speed that you previously set. The cruise control indicator will go off. 161 Adaptive cruise control (ACC) The radar sensor is mounted behind the front grille, immediately to the right of the Ford badge (when viewed from the front of the vehicle). PRINCIPLE OF OPERATION The adaptive cruise control system is designed to help you maintain a gap from the vehicle ahead or a set road speed if there is no slower vehicle ahead. The system is intended to provide enhanced operation of the vehicle when following other vehicles which are in the same lane and travelling in the same direction. When using ACC, follow the strict guidelines below: • WARNINGS Adaptive cruise control is not a collision warning or avoidance system. The separate forward alert function provides a collision warning and mitigation feature. See Forward alert function (page 166). You must intervene if the system does not detect a vehicle in front. • • • • Adaptive cruise control cannot cover all traffic, weather and road conditions. • When driving you are responsible for maintaining the correct distance and speed, even when adaptive cruise control is used. You must always pay attention to the traffic conditions and intervene when adaptive cruise control is not maintaining a suitable speed or suitable distance. Only use adaptive cruise control when conditions are favourable, for example on motorways and main roads with steady free flowing traffic. Do not use in poor visibility, specifically fog, heavy rain, spray or snow. Do not use on icy or slippery roads. It is your responsibility to stay alert, drive safely and be in control of the vehicle at all times. Keep the front of the vehicle free from dirt, metal badges or objects, including vehicle front protectors and additional lights which may prevent the sensor from operating. Do not use ACC when entering or leaving a motorway. The radar sensor has a limited field of vision. In some situations it may detect a vehicle other than the one expected or not detect any vehicle at all. The adaptive cruise control does not brake for slow or stationary vehicles. When ACC is activated, you may hear some unusual sounds during automatic braking. This is normal and caused by the automatic braking system. The adaptive cruise control system is based on the use of a radar sensor which projects a beam directly forward of the vehicle. This beam will detect any vehicle ahead within the system's range. 162 Adaptive cruise control (ACC) Detection beam issues WARNING In these cases ACC may brake late or unexpectedly. The driver should stay alert and intervene if necessary. Automatic braking with ACC Adaptive cruise control will automatically brake for you, if required to maintain the set gap between your vehicle and the one detected in front. This braking capacity is limited to approximately 30% of the total manual braking capacity to ensure smooth and comfortable cruising. If the car needs to brake more heavily than this, and you do not intervene by braking manually, an alarm will sound and a warning symbol will be displayed in the cluster. WARNING You must take immediate action once alerted, as the ACC braking will not be sufficient to keep a safe distance to the vehicle in front. E71621 USING ACC Detection issues can occur: • • • The system is operated by adjustment controls mounted on the steering wheel. The system is deactivated when the brakes or clutch are used, the gear selector is moved to a neutral position or if the accelerator pedal is depressed for a longer period. The system will change to standby mode, allowing you full manual control of the vehicle. When driving on a different line to the vehicle in front (A). With vehicles that edge into your lane that can only be detected once they have moved fully into your lane (B). Motorcycles may be detected late, or not at all. There may be issues with the detection of vehicles in front when going into and coming out of a bend (C). The detection beam will not follow sharp curves in the road. Note: If the accelerator is depressed for a short period, for example when overtaking, the system is temporarily deactivated and then reactivated when the accelerator pedal is released. ACC override is displayed in the information display. 163 Adaptive cruise control (ACC) Press the SET+ switch or the SETswitch to select your desired cruise speed. The speed is displayed in the information display and stored as the set speed. The ACC indicator illuminates. A E B D Note: Vehicle speed may be increased and decreased at intervals of 5 km/h or 5 mph. Smaller increases of 1 km/h or 1 mph may be set by pressing the RES switch. C Changing the set speed E82310 A ACC on/off B ACC cancel C Forward alert on/off D ACC gap increase E ACC gap decrease Press the SET+ switch or the SETswitch to accelerate or decelerate. Note: If the system does not react to these changes the reason may be that the gap interval to the vehicle in front prevents an increase in speed. Setting the vehicle gap Switching ACC on Press switch A. The system is set to standby mode and Standby is displayed in the information display. Setting a speed E82311 The distance between you and the vehicle detected in front is maintained by a variable setting. There are five steps which are represented by horizontal bars displayed in the information display. One bar denotes the smallest gap and five bars indicate the largest gap. These bars are shown empty when in standby mode and filled when in active mode. E70615 Note: The system must be in Standby mode. 164 Adaptive cruise control (ACC) If no vehicle is detected in front, then only your vehicle is displayed in the information display below the bars. The system will maintain the set speed when conditions permit. The set gap is maintained and displayed. CAUTION Use the appropriate gap setting in accordance with local traffic regulations. Cancelling ACC If a vehicle is detected by the sensor, the display will show another vehicle above the horizontal bars: Press either the brake or clutch pedal, or switch B. The system will return to standby mode but will retain the set speed and gap in the memory. The ACC indicator will go off. Resuming ACC Press the RES switch. The ACC indicator illuminates and the system will resume with the previously set speed and vehicle gap setting if conditions permit. Switching ACC off Press switch A. Note: Pressing switch A does not return the system to standby mode. The stored speed is not retained. E82312 This is a follow mode, and the system will accelerate or decelerate as necessary to maintain the set gap. Note: To temporarily deactivate the system press switch B. Press switch E to decrease the gap or switch D to increase the gap. The gap selected will be represented by the number of bars in the display. The recommended gap setting is three to five bars. Automatic deactivation The system is dependent on various other safety systems, for example ABS and ESP. If any of these systems are malfunctioning or reacting to an emergency, the system is automatically deactivated. Note: The gap setting is time dependant and therefore the distance will automatically adjust with your speed. For example on a gap setting of three bars, the time gap is 1.8 seconds. This will mean that at a speed of 100 km/h (62 mph), the distance to the vehicle in front will be maintained at 50 metres (164 feet) In the event of automatic deactivation a signal will sound and the message ACC cancel is displayed in the information display. You must then intervene and adapt your driving and speed to vehicles in front. An automatic deactivation can be due to the: 165 Adaptive cruise control (ACC) • • • • • • vehicle speed falling below 30 km/h (20 mph) wheels lose traction brake temperature is high, for example when driving on mountainous or hilly roads engine speed is too low radar sensor is covered parking brake or electric parking brake (EPB) is applied. WARNINGS Never wait for a collision warning. When driving you are responsible for maintaining the correct distance and speed, even when the system is used. The system will only react to vehicles in front travelling in the same direction and will not react to slow or stationary vehicles. Never drive in a manner to provoke the system. The system is designed to assist in emergencies only. If the engine speed drops too low, a message is displayed in the information display instructing you to change down a gear (manual transmission only). If you do not follow this recommendation then the system will go into automatic deactivation mode. The system alerts you by warning chimes and a visual warning in the information display. When forward alert is activated a red flashing warning triangle is displayed in the information display. Note: The system will not operate if the electronic stability programme (ESP) has been manually switched off. Note: You can deactivate the warning chimes by using the buttons on the steering wheel. See Audible warnings and indicators (page 81). FORWARD ALERT FUNCTION The system does not operate in all driving situations and traffic, weather and road conditions. The system assists you by warning of the risk of a collision, and reducing the severity of a collision with a vehicle in front. This works by using two methods: • • The radar sensor detects vehicles in front that are driving in the same direction as you. If the risk of collision still increases after the initial warning then brake support is activated. Brake support prepares the brake system for rapid braking and the brakes are applied gently, which may be noticed as a slight jerk. If the brake pedal is depressed sufficiently quickly then braking is implemented with full brake function, even if the force on the pedal is light. You are alerted to a potential collision so you may brake earlier than normal. Brake support is activated to enable full braking effectiveness. The collision alerts will only occur if the system is switched on, however the brake support is always on and cannot be turned off. Warnings are both visual and audible. Brake support is activated automatically if necessary to reduce the collision speed. The brake support system only reduces the collision speed if you brake immediately once alerted. 166 Adaptive cruise control (ACC) CAUTION Warnings may be triggered late, be absent or triggered unnecessarily if the traffic situation means that the radar sensor cannot accurately detect a vehicle in front. The system uses the same radar sensors as adaptive cruise control (ACC) and therefore has the same limitations. See Principle of operation (page 162). Note: The system may be used with or without the ACC system being activated. Switching forward alert on/off E94165 The indicator will illuminate. Adjusting the warning sensitivity You may adjust the system warning sensitivity using the buttons on the steering wheel. See General information (page 82). This controls how early the visual and audible warning is activated. 167 Load carrying GENERAL INFORMATION CAUTIONS Do not use any abrasive materials to clean the interior of the rear windows. WARNINGS Use load securing straps to an approved standard, e.g. DIN. Do not install stickers or labels to the interior of the rear windows. Make sure that you secure all loose items properly. Place luggage and other loads as low and as far forward as possible within the luggage or loadspace. Do not drive with the tailgate or rear door open. Exhaust fumes may enter the vehicle. Do not exceed the maximum front and rear axle loads for your vehicle. See Vehicle identification (page 235). CAUTIONS Do not allow items to contact the rear windows. E98626 168 Load carrying LUGGAGE ANCHOR POINTS Galaxy A B A B C A B C E75393 169 Load carrying S-MAX C A A B C A B B E75394 B1 Vehicles without third row seats. Raise the carpet to gain access to the anchor points. B2 Vehicles with third row seats 170 Load carrying SLIDING LOADSPACE FLOOR WARNING Do not slide the loadspace floor rearwards when the vehicle is standing on an incline of 15 degrees or more and facing uphill. CAUTION The maximum permissible weight on the sliding loadspace floor is 200 kilogrammes (441 pounds). E74811 The maximum permissible weight on the end of the sliding loadspace floor when the floor is in the fully extended position (slid outside the luggage compartment) is 120 kilogrammes (265 pounds). To slide it out fully, press the unlocking handle again and pull it out until it engages in the end position. To slide it forwards, press the unlocking handle and push it forwards. Note: You do not have to exert as much pressure on the unlocking handle if you push the loadspace floor forwards slightly when operating it. Storage compartment A storage compartment is located in the floor at the rear of the luggage compartment. To gain access to the storage compartment, lift up the sliding loadspace floor as follows: E74810 Press the unlocking handle and pull the loadspace floor rearwards. It will stop and engage at a midway position. 171 Load carrying 3. Push the floor forwards until it engages at the front (2). 4. Release the support leg from the clip on the underside of the floor. 5. Insert the end into the square retainer in the left-hand rail (3). 6. Lift the storage compartment cover using the loop. 2 1 To return the loadspace floor to the normal position: 1. Hold the floor with one hand and release the support leg with the other hand. 2. Insert the support leg back into the clip. 3. Lower the floor. 4. Press the unlocking handle and pull the loadspace floor rearwards until it drops into position on the rails. E74812 REAR UNDER FLOOR STORAGE 3 E72983 Vehicles with a sliding loadspace floor E74813 1. Press the unlocking handle and pull the loadspace floor rearwards a short way. 2. Lift up the rear of the floor (1). Raise the loadspace floor to gain access to the storage compartment. See Sliding loadspace floor (page 171). 172 Load carrying S-MAX A Vehicles without third row seats B A B A B E75395 CARGO NETS Luggage retention net - type 1 E75891 WARNING When the retention net is installed, do not sit in the seats behind it. CAUTION Keep a distance of at least one centimetre (½ inch) between the retention net and the seats in front of it. You can install the net in the following positions: 173 A Behind the front seats B Behind the second row seats Load carrying Installing the net 1 2 C C E75892 E75893 C Release button 4 3 E75894 174 Load carrying 1. 2. 3. 4. 5. 6. Luggage retention net - type 2 Fold the seatbacks down. See Rear seats (page 121). If the retention net is folded, press the red release button C on the hinges of the upper and lower bar 1 and unfold it. Push the ends of the upper bar towards each other and insert them into the retainers on the roof A or B. Make sure that the flap for the centre seat belt is situated on the right hand side of the vehicle. Push the bar forwards into the narrow section of the retainers 2. Attach the net to the luggage anchor points 3. See Luggage anchor points (page 169). Tighten the belts 4. CAUTIONS Do not exceed the maximum permissible retention net load of 1 kilogram (2 pounds). Do not place large objects in the lower net storage compartments. Make sure that the rods are securely positioned in the trim panels. Remove in the reverse order. If you need to use the centre seat belt: E95920 1. Fold the third row seats flat. See Rear seats (page 121). 2. Insert one end of each rod into the retainers in the luggage compartment trim panel. 3. Push the other end of each rod toward its centre and insert the rod into the retainer in the opposite trim panel. 5 E75895 Note: The upper rod ends can be inserted into either the top or front retainer in the trim panels. 1. Open the flap 5. 2. Route the seat belt through the opening. Note: On S-MAX the lower net incorporates three storage compartments. Make sure that the net is positioned so that the storage compartments face towards the rear. 175 Load carrying LUGGAGE COVERS ROOF RACKS AND LOAD CARRIERS WARNING Roof rack Do not place objects on the luggage cover. WARNINGS If you use a roof rack, the fuel consumption of your vehicle will be higher and you may experience different driving characteristics. Read and follow the manufacturer’s instructions when you are fitting a roof rack. CAUTION Do not exceed the maximum permissible roof load of 75 kilogrammes (165 pounds) (including the roof rack). E72969 Check the security of the roof rack and tighten its fittings as follows: Pull out the cover and secure it in the retaining points. • • • Release it from the retaining points and let it roll back into the case. Clip the retaining hook onto the case. before starting after driving 50 kilometres (30 miles) at 1 000 kilometres (600 miles) intervals. To minimise windnoise when the roof rack is not in use, cross rails should be moved rearwards and placed together. To reduce fuel consumption, cross rails should be removed when not in use. E72970 To remove or install the cover, push either end of the case inwards. 176 Load carrying Installing the load retaining fixtures LOAD RETAINING FIXTURES Seatback E75002 WARNINGS Do not raise the seatback when a load retaining fixture is installed. E74997 Do not exceed the maximum permissible load of 60 kilogrammes (132 pounds) on two load retaining fixtures and 30 kilogrammes (66 pounds) on one. Check the security of the load retaining fixtures and tighten its fittings as follows: • • • before starting after driving 50 kilometres (30 miles) at 1 000 kilometres (600 miles) intervals. E74998 177 Load carrying Luggage compartment floor (vehicles with five seats) Sliding loadspace floor E75003 E74999 178 Load carrying Installing the luggage anchor points E75001 Installing the load bracket WARNINGS Install the load bracket with the longest section towards the rear of the vehicle. If you install it the wrong way round, it may not hold the box in place in the event of an accident. Do not install the load bracket on a second row seatback. It cannot be installed the right way round in this position. E75000 Do not exceed the maximum permissible load of 20 kilogrammes (44 pounds). 179 Load carrying 3 3 2 1 E76378 1. Turn the box over. 2. Position the load bracket. 3. Secure the load bracket with four screws. E76380 5. Position the load bracket onto the folded seatback so that the captured bolts go through the two holes in longest section of the bracket. 6. Secure the load bracket with the two wing nuts. 7. Remove in the reverse order. DOG GUARD E76379 WARNING 4. Slide the captured bolts onto the load retaining fixture. When the dog guard is installed, do not sit in the seats behind it. CAUTION Keep a distance of at least one centimetre (½ inch) between the dog guard and the seats in front of it. You can install the dog guard in the following positions: 180 Load carrying A B A 1 B E75897 A B E75891 A Behind the front seats B Behind the second row seats Installing the dog guard 2 D C E75896 E75892 C Bar for installing the dog guard behind the front seats D Bar for installing the dog guard behind the second row seats 181 Load carrying 4 5 3 E75898 1. 2. 3. 4. 5. 6. 7. 6 Fold the seatbacks down. See Rear seats (page 121). Attach the bar (C or D) to the luggage anchor points 1. See Luggage anchor points (page 169). Do not tighten the screws. Push the ends of the bar on the grille towards each other and insert them into the retainers on the roof (A or B). Make sure that the flap for the centre seat belt is situated on the right hand side of the vehicle. Push the bar forwards into the narrow section of the retainers 2. Attach the grille to the lower bar with the handwheels 3. Do not tighten the handwheels. Tighten the screws at the luggage anchor points. Tighten the handwheels 3. E75899 1. Loosen the handwheel and remove it 4. 2. Fold down the flap 5. 3. Fix the flap with the handwheel 6. 4. Route the seat belt through the opening. Remove in the reverse order. If you need to use the centre seat belt: 182 Towing Steep gradients TOWING A TRAILER WARNING WARNINGS Do not exceed 100 km/h (62 mph). The overrun brake on a trailer is not controlled by ABS. The rear tyre pressures must be increased by 0.2 bar (3 psi) above specification. See Technical specifications (page 232). Change down a gear before you reach a steep downhill gradient. DETACHABLE TOW BALL Do not exceed the maximum gross train weight stated on the vehicle identification plate. See Vehicle identification (page 235). WARNINGS When not in use, always transport the tow ball arm securely fastened in the luggage compartment. CAUTION Take special care when fitting the tow ball arm as the safety of the vehicle and the trailer depends on Do not exceed the maximum permissible nose weight, i.e. vertical weight on the tow ball, of 90 kilogrammes (198 pounds). this. Note: Not all vehicles are suitable or approved to have tow bars fitted. Check with your dealer first. Do not use any tools for mounting or dismounting the tow ball arm. Do not modify the trailer coupling. Do not disassemble or repair the tow ball arm. Place loads as low and central to the axle(s) of the trailer as possible. If you are towing with an unladen vehicle, the load in the trailer should be placed toward the nose, within the maximum nose load, as this gives the best stability. The stability of the vehicle to trailer combination is very much dependant on the quality of the trailer. In high altitude regions above 1 000 metres (3 281 feet), the stipulated maximum permitted gross train weight must be reduced by 10% for every additional 1 000 metres (3 281 feet). E71328 A 13-pin trailer socket and the tow ball arm seat are provided underneath the rear bumper. Turn the trailer socket down through 90 degrees until it engages in the end position. 183 Towing Unlocking the tow ball arm mechanism Inserting the tow ball arm 3 1 1 2 E71329 1. Remove the protecting cap (1). Insert the key and turn it clockwise to unlock (2). 2. Hold the tow ball arm. Pull the handwheel out and turn it clockwise until it clicks (3). 3. The red mark on the handwheel must align with the green mark on the tow ball. 4. Release the handwheel. The tow ball arm is unlocked. 2 E71330 WARNING The tow ball arm may only be inserted when completely unlocked. 1. Pull out the plug. 2. Insert the tow ball arm vertically and press it upwards until it engages (1). Do not hold your hand near the handwheel. 3. The green mark on the handwheel must align with the green mark on the tow ball. 4. To lock, turn the key anti-clockwise and remove the key (2). 5. Pull the protecting cap from the key bow and press it onto the lock. 184 Towing Driving with a trailer Removing the tow ball arm A 3 B E71331 2 WARNING If any of the below conditions cannot be met, do not use the tow bar and have it checked by a properly trained technician. 1 Before starting your journey, make sure that the tow ball arm is properly locked. Check: • • • • E71332 1. Unhitch the trailer. 2. Remove the protecting cap. Press the cap into the key bow. Insert the key and unlock (1). 3. Hold the tow ball arm. Pull the handwheel out, turn it clockwise against the stop (2) and remove the tow ball arm (3). 4. Release the handwheel. the green marks are aligned. the handwheel (A) is correctly fitted to the tow ball arm. you have removed the key (B). the tow ball arm is securely positioned. It must not move when jerked. When unlocked in this way, the tow ball arm can be reinserted at any time. 185 Towing Driving without a trailer RETRACTABLE TOW BALL CAUTION Only move the tow ball arm with your hand. Never use your foot or auxiliary tools as damage to the mechanism may result. 1 A E94771 1. Remove the tow ball arm. 2. Insert the plug into its seat (1). WARNING Never unlock the tow ball arm with the trailer attached. Maintenance E75173 CAUTION You can turn the retractable tow ball arm through 90 degrees using the handwheel A. Remove the tow ball arm and protect the seat with the plug before steam cleaning your vehicle. Keep the system clean. Periodically lubricate bearings, sliding surfaces, and locking balls with resin-free grease or oil and the lock with graphite. C B Keep a note of the key number. In case of loss, replacement keys are available from the manufacturer by stating the 4-digit key number. E75174 186 Towing A 13-pin trailer socket B is provided underneath the rear bumper next to the tow ball arm C. E75175 D E76040 Note: When not in use, insert the key into the storage position D to the right of the handwheel. Swivelling the tow ball in WARNINGS Keep your hands away from the handwheel as it rotates during the locking process. E75176 1. Insert the key into the handwheel and turn it clockwise to unlock. 2. Pull the handwheel out and turn it anti-clockwise to the stop. The tow ball arm automatically swivels into a midway position. 3. Release the handwheel. The tow ball arm is not locked. This is indicated by the warning tone and the handwheel projects about five millimetres (0.2 inch) from its housing. You will hear a warning tone when the tow ball arm is not in one of the locked positions. If you do not hear the tone when moving the tow ball arm, do not use the tow bar and have it checked by a properly trained technician. CAUTION Before retracting the ball neck into its stowage position always unhitch the trailer or dismantle load carriers and their attachments. Dismantle attachments for tracking stabilisation. Remove the plug for the trailer power supply and the adapter from the socket. Failure to do so may result in damage to the bumper. 187 Towing 4. Manually turn the tow ball arm steadily from its midway position to the stop in the stowage position. The tow ball arm automatically locks in the end position. The locking process is clearly audible if the level of background noise is not too high. When the locking process is completed, the warning tone stops and the handwheel will return to its original position. 5. Turn the key anti-clockwise and remove it. Insert the key into the storage position. E75179 E75178 E75177 1. Insert the key into the handwheel and turn it clockwise to unlock. 2. Pull the handwheel out and turn it anti-clockwise to the stop. The tow ball arm automatically swivels into the midway position. 3. Release the handwheel. The tow ball arm is not locked. This is indicated by the warning tone and the handwheel projects about five millimetres (0.2 inch) from its housing. Swivelling the tow ball out WARNING You will hear a warning tone when the tow ball arm is not in one of the locked positions. If you do not hear the tone when moving the tow ball arm, do not use the tow bar and have it checked by a properly trained technician. 188 Towing 4. Manually turn the tow ball arm steadily from its midway position to the stop in the operating position. The tow ball arm automatically locks in the end position. The locking process is clearly audible if the level of background noise is not too high. When the locking process is completed, the warning tone stops and the handwheel will return to its original position. 5. Turn the key anti-clockwise and remove it. Insert the key into the storage position. CAUTIONS When cleaning the vehicle with a steam jet do not direct the high pressure jet directly onto the swivel joint of the tow ball arm. Driving with a trailer WARNING If any of the conditions below cannot be met, do not use the tow bar and have it checked by a properly trained technician. Before starting your journey, make sure that the tow ball arm is properly locked. Check that: • • • • there is no warning tone when the locking procedure has been completed the handwheel is in its housing and that there is no gap you have locked the handwheel (anti-clockwise) and removed the key the tow ball arm is locked. It must not move when jerked. Maintenance CAUTIONS The towing hitch and control unit are maintenance-free. Do not grease or oil them. Only the manufacturer should carry out repairs or dismantle the towing hitch. 189 Driving hints RUNNING-IN DRIVING THROUGH WATER Tyres Driving through water WARNING CAUTIONS Drive through water in an emergency only, and not as part of normal driving. New tyres need to be run-in for approximately 500 kilometres (300 miles). During this time, you may experience different driving characteristics. Engine damage can occur if water enters the air filter. Brakes and clutch In an emergency, the vehicle can be driven through water to a maximum depth of 200 mm and at a maximum speed of 10 km/h (6 mph). Extra caution should be exercised when driving through flowing water. WARNING Avoid heavy use of the brakes and clutch if possible for the first 150 kilometres (100 miles) in town and for the first 1 500 kilometres (1 000 miles) on motorways. When driving in water, maintain a low speed and do not stop the vehicle. After driving through water, and as soon as it is safe to do so: • Depress the brake pedal lightly and check that full brake function is achieved. • Check that the horn works. • Check that the vehicle's lights are fully operational. • Check the power assistance of the steering system. Engine CAUTION Avoid driving too fast during the first 1 500 kilometres (1 000 miles). Vary your speed frequently and change up through the gears early. Do not labour the engine. COLD WEATHER PRECAUTIONS The functional operation of some components and systems can be affected at temperatures below -30°C (-22°F). 190 Emergency equipment FIRST AID KIT E73238 Space is provided in the under floor storage compartment to store a first aid kit. See Storage compartments (page 131). WARNING TRIANGLE E73239 Space is provided in the under floor storage compartment to store a warning triangle. See Storage compartments (page 131). 191 Fuses FUSE BOX LOCATIONS Engine compartment fuse box E72590 Central fuse box 2. Turn the knob through 90 degrees and release the fuse box from the retaining bracket. 3. Lower the fuse box and pull it towards you. E72589 E72622 1. 4. Remove the cover to gain access to the fuses (vehicles with a cooled glove box). 5. Install in the reverse order. E72588 Loosen the screws. 192 Fuses Rear fuse box CHANGING A FUSE WARNINGS Do not modify the electrical system of your vehicle in any way. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by a properly trained technician. Switch the ignition and all electrical equipment off before touching or attempting to change a fuse. CAUTION Fit a replacement fuse with the same rating as the one you have removed. E72591 Release the catches and remove the cover. Note: You can identify a blown fuse by a break in the filament. Note: All fuses, except high current fuses, are a push fit. Note: A fuse puller is located in the engine compartment fuse box. 193 Fuses FUSE SPECIFICATION CHART Engine compartment fuse box E75525 Fuse Ampere rating Colour F1 10 red Transmission control module F2 5 tan Glow plug monitoring (diesel engines) Circuits protected 194 Fuses Fuse Ampere rating F3 70 F3 80 F4 60 yellow Glow plugs F5 60 yellow Engine cooling fan F6 10 red HEGO sensor (engine management), CMS Sensor, Oxygen Sensor F7 5 tan Relay coils F8 10 red Powertrain control module Colour Circuits protected 1 brown Engine cooling fan - twin fan (2.3L DuratecHE) 1 clear Electric hydraulic power steering (EHPAS) (2.0L Duratorq-TDCi) F9 10 red MAF Sensor, Swirl Control Valve , Fuel Injectors, CCV PTC Heater, Variable Intake valve, Variable Exhaust Valve (engine management) F10 10 red Engine control module F11 10 red PCV Valve, VCV Valve, Water in Fuel Sensor, Sonic Purge Valve, Swirl Control Valve, Variable Intake Valve, EGR Valve, IVVT Oil Control Valve (engine management) F11 10 red Powertrain control module (2.2L DuratecHE and 2.3L Duratec-HE) F12 10 red EGR Throttle, Variable Turbo Control Valve, Coil on Plug; Canister Purge Valve, Power Steering Pressure Switch (engine management) F12 10 red Glow plug relay, air conditioning (AC) clutch relay(2.2L Duratorq-TDCi) F13 15 blue Air conditioning relay F14 15 blue Diesel filter heater, fuel metering unit (2.2L Duratorq-TDCi) F15 40 orange F16 80 clear Starter relay Diesel auxiliary heater (PTC) 195 Fuses Fuse Ampere rating Colour F17 60 yellow Central fuse box supply A F18 60 yellow Central fuse box supply B F19 60 yellow Rear fuse box supply C F20 60 yellow Rear fuse box supply D Circuits protected F21 – – F22 30 green Windscreen wiper module F23 25 clear Heated rear window F24 30 green Headlamp washer F25 30 green ABS valves F26 40 orange ABS pump F27 30 green F28 40 orange F29 – – Not used F30 – – Not used F31 15 blue Horn F32 5 tan Fuel fired heater - remote control F33 5 tan Light switch module, engine compartment fuse box coils F34 40 orange Heated windscreen (left-hand side) F35 40 orange Heated windscreen (right-hand side) F36 5 tan ABS F37 10 red Heated front washer jets 1 Not used Fuel fired heater Heater blower F38 5 tan Adaptive cruise control (ACC) F39 15 blue Adaptive front lighting system (AFS) F40 – – F41 20 yellow Not used Instrument panel 196 Fuses 1 Fuse Ampere rating Colour Circuits protected F42 10 red Engine control module, transmission control module, electric hydraulic power steering (EHPAS) (2.0L Duratorq-TDCi) F43 5 tan Headlamp levelling, adaptive front lighting system (AFS) F44 - - F45 15 blue Not used Rear window wiper Fit a replacement with the same rating as the one you have removed. Central fuse box E75527 197 Fuses Fuse Ampere rating Colour F1 5 tan Rain sensor F2 10 red SRS (airbag) supply F3 7.5 brown ABS, yaw rate sensor (ESP), electric parking brake (EPB), accelerator pedal supply F4 7.5 brown Electronic feed, electronic fuse Circuits protected F5 - - F6 15 blue Not used F7 7.5 brown F8 5 tan Instrument cluster F9 15 blue Main beam Audio system (including voice control) Steering wheel module F10 - - F11 7.5 brown Not used F12 – – F13 15 blue Front fog lamp F14 15 blue Windscreen washers F15 10 red Adaptive cruise control (ACC) F16 – – F17 10 red Interior lamps Reversing lamps Not used Not used F18 5 tan Engine immobiliser F19 15 blue Cigar lighter F20 – – F21 5 tan F22 20 yellow Fuel pump F22 7.5 brown Fuel pump (2.2L Duratorq) F23 – – F24 5 tan Not used Remote frequency receiver, Interior motion sensor Not used Ignition switch 198 Fuses Fuse Ampere rating Colour F25 10 red Fuel filler flap F26 5 tan Battery backup sounder (alarm system), OBD II (board computer diagnostics) F27 5 tan Steering column unit, climate control module F28 5 tan Brake lamp switch Circuits protected 199 Fuses Rear fuse box E75526 Fuse Ampere rating Colour Circuits protected FA1 25 clear Door module (left-hand front) (window up/ down, central locking, electric folding mirror, heated mirror) 200 Fuses Fuse Ampere rating Colour Circuits protected FA2 25 clear Door module (right-hand front) (window up/ down, central locking, electric folding mirror, heated mirror) FA3 25 clear Door module (left-hand rear) (window up/ down) FA4 25 clear Door module (right-hand rear) (window up/ down) FA5 10 red Rear locking (without rear door modules) FA6 15 blue Auxiliary power socket FA7 5 tan Relay coils FA8 – – Not used Not used FA9 – – FA10 30 green Electric driver's seat FA11 20 yellow Accessories, trailer module FA12 – – Not used FB1 5 tan Parking aid module FB2 15 blue Suspension module FB3 15 blue Heated driver's seat FB4 15 blue Heated front passenger seat FB5 – – FB6 10 red Not used FB7 – – Not used FB8 – – Not used FB9 30 green FB10 10 red FB11 – – Not used FB12 – – Not used FC1 7.5 brown Rear climate control Electric front passenger seat Anti-theft alarm horn Electric rear quarter windows 201 Fuses Fuse Ampere rating Colour FC2 30 green Electric parking brake (EPB) FC3 30 green Electric parking brake (EPB) FC4 10 red FC5 7.5 brown FC6 20 yellow FC7 5 tan FC8 – – Not used FC9 – – Not used FC10 – – Not used FC11 – – Not used FC12 – – Not used Circuits protected Rear air conditioning CD changer, rear seat entertainment system Rear air conditioning blower Seat memory function module 202 Vehicle recovery Front towing eye TOWING POINTS Towing eye location E73241 Rear towing eye E73240 The screw-in towing eye is located in the underfloor storage compartment behind the front seats. See Storage compartments (page 131). A The towing eye must always be carried in the vehicle. E73242 Installing the towing eye A CAUTION Mount for rear towing eye The screw-in towing eye has a left-hand thread. Turn it anti-clockwise to install it. Make sure that the towing eye is fully tightened. Insert a suitable object into the hole on the underside of the cover and prise off the cover. Note: On vehicles with a tow bar, the towing eye cannot be installed at the rear of the vehicle. Use the tow bar to tow a vehicle. TOWING THE VEHICLE ON FOUR WHEELS Install the towing eye. All vehicles WARNINGS Switch the ignition on when your vehicle is being towed. The steering lock will engage and the direction indicators and brake lamps will not work if you do not. 203 Vehicle recovery WARNINGS The brake servo and the power steering pump do not operate unless the engine is running. Press the brake pedal harder and allow for increased stopping distances and heavier steering. CAUTIONS Too much tension in the tow rope could cause damage to your vehicle or the vehicle that is towing. Do not use a rigid tow bar on the front towing eye. Drive off slowly and smoothly without jerking the vehicle that is towing. Vehicles with automatic transmission CAUTIONS Do not tow your vehicle faster than 50 km/h (30 mph) or further than 50 kilometres (30 miles). If a speed of 50 km/h (30 mph) and a distance of 50 kilometres (30 miles) is to be exceeded the drive wheels must be lifted clear of the ground. In the event of a mechanical failure of the transmission the drive wheels must be lifted clear of the ground. Do not tow your vehicle backwards. Select neutral when your vehicle is being towed. 204 Maintenance Check when refuelling GENERAL INFORMATION • Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford Authorised Repairers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialised tools developed specifically for servicing your vehicle. • • • • In addition to regular servicing, we recommend that you carry out the following additional checks. Monthly checks • WARNINGS Switch the ignition off before touching or attempting adjustment of any kind. • • Do not touch the electronic ignition system parts after you have switched the ignition on or when the engine is running. The system operates at high voltage. • • • • Keep your hands and clothing clear of the engine cooling fan. Under certain conditions, the fan may continue to run for several minutes after you have switched the engine off. CAUTION When carrying out maintenance checks, make sure that filler caps are fitted securely. Daily checks • • • Engine oil level. See Engine oil check (page 214). Brake fluid level. See Brake and clutch fluid check (page 215). Washer fluid level. See Washer fluid check (page 215). Tyre pressures (when cold). See Technical specifications (page 232). Tyre condition. See Tyre care (page 230). Exterior lamps. Interior lamps. Warning lamps and indicators. 205 Engine coolant level (engine cold). See Engine coolant check (page 214). Pipes, hoses and reservoirs for leaks. Power steering fluid level. See Power steering fluid check (page 215). Air conditioning operation. Parking brake operation. Horn operation. Tightness of wheel nuts. See Technical specifications (page 232). Maintenance Raise the bonnet slightly and move the catch towards the left-hand side of the vehicle. OPENING AND CLOSING THE BONNET Opening the bonnet E73698 E87786 Open the bonnet and support it with the strut. Closing the bonnet WARNING Make sure that the bonnet is closed properly. Lower the bonnet and allow it to drop from under its own weight for the last 20 – 30 centimetres (8 - 11 inches). E87785 206 Maintenance ENGINE COMPARTMENT OVERVIEW - 2.0L DURATEC-HE (MI4) B A J I D C H G E F E73231 1 A Brake and clutch fluid reservoir (right-hand drive). See Brake and clutch fluid check (page 215). B Engine oil filler cap . See Engine oil check (page 214). C Brake and clutch fluid reservoir (left-hand drive). See Brake and clutch fluid check (page 215). D Battery. See Using booster cables (page 220). E Engine compartment fuse box. See Fuse specification chart (page 194). F Air cleaner. No maintenance necessary. G Screen washer fluid reservoir. See Washer fluid check (page 215). H Engine oil dipstick . See Engine oil check (page 214). I Power steering fluid reservoir. See Power steering fluid check (page 215). J Engine coolant reservoir. See Engine coolant check (page 214). 1 1 The filler caps and the engine oil dipstick are coloured for easy identification. 207 Maintenance ENGINE COMPARTMENT OVERVIEW - 2.3L DURATEC-HE (MI4) B A J I D C H G E F E81313 1 A Brake and clutch fluid reservoir (right-hand drive). See Brake and clutch fluid check (page 215). B Engine oil filler cap . See Engine oil check (page 214). C Brake and clutch fluid reservoir (left-hand drive). See Brake and clutch fluid check (page 215). 1 D Battery. See Using booster cables (page 220). E Engine compartment fuse box. See Fuse specification chart (page 194). F Air cleaner. No maintenance necessary. G Screen washer fluid reservoir. See Washer fluid check (page 215). H Engine oil dipstick . See Engine oil check (page 214). I Power steering fluid reservoir. See Power steering fluid check (page 215). J Engine coolant reservoir. See Engine coolant check (page 214). 1 The filler caps and the engine oil dipstick are coloured for easy identification. 208 Maintenance ENGINE COMPARTMENT OVERVIEW - 2.5L DURATEC (VI5) B A J I D C H G E F E73232 1 A Brake and clutch fluid reservoir (right-hand drive). See Brake and clutch fluid check (page 215). B Engine oil filler cap . See Engine oil check (page 214). C Brake and clutch fluid reservoir (left-hand drive). See Brake and clutch fluid check (page 215). D Battery. See Using booster cables (page 220). E Engine compartment fuse box. See Fuse specification chart (page 194). F Screen washer fluid reservoir. See Washer fluid check (page 215). G Air cleaner. No maintenance necessary. H Engine oil dipstick . See Engine oil check (page 214). I Power steering fluid reservoir. See Power steering fluid check (page 215). J Engine coolant reservoir. See Engine coolant check (page 214). 1 1 The filler caps and the engine oil dipstick are coloured for easy identification. 209 Maintenance ENGINE COMPARTMENT OVERVIEW - 1.8L DURATORQ-TDCI (LYNX) DIESEL B A J I D C H G E F E73233 1 A Brake and clutch fluid reservoir (right-hand drive). See Brake and clutch fluid check (page 215). B Engine oil filler cap . See Engine oil check (page 214). C Brake and clutch fluid reservoir (left-hand drive). See Brake and clutch fluid check (page 215). D Battery. See Using booster cables (page 220). E Engine compartment fuse box. See Fuse specification chart (page 194). F Air cleaner. No maintenance necessary. G Screen washer fluid reservoir. See Washer fluid check (page 215). H Engine oil dipstick . See Engine oil check (page 214). I Power steering fluid reservoir. See Power steering fluid check (page 215). J Engine coolant reservoir. See Engine coolant check (page 214). 1 1 The filler caps and the engine oil dipstick are coloured for easy identification. 210 Maintenance ENGINE COMPARTMENT OVERVIEW - 2.0L DURATORQTDCI (DW) DIESEL B A J I D C H G E F E73234 1 A Brake and clutch fluid reservoir (right-hand drive). See Brake and clutch fluid check (page 215). B Engine oil filler cap . See Engine oil check (page 214). C Brake and clutch fluid reservoir (left-hand drive). See Brake and clutch fluid check (page 215). D Battery. See Using booster cables (page 220). E Engine compartment fuse box. See Fuse specification chart (page 194). F Air cleaner. No maintenance necessary. G Screen washer fluid reservoir. See Washer fluid check (page 215). H Engine oil dipstick . See Engine oil check (page 214). I Power steering fluid reservoir. See Power steering fluid check (page 215). J Engine coolant reservoir. See Engine coolant check (page 214). 1 1 The filler caps and the engine oil dipstick are coloured for easy identification. 211 Maintenance ENGINE COMPARTMENT OVERVIEW - 2.2L DURATORQTDCI (DW) DIESEL B A J I H D C G E F E87715 1 A Brake and clutch fluid reservoir (right-hand drive): See Brake and clutch fluid check (page 215). B Engine oil filler cap : See Engine oil check (page 214). C Brake and clutch fluid reservoir (left-hand drive): See Brake and clutch fluid check (page 215). D Battery: See Vehicle battery (page 220). E Engine compartment fuse box: See Fuses (page 192). F Air cleaner: No maintenance necessary. 1 G Screen washer fluid reservoir: See Washer fluid check (page 215). H Engine oil dipstick : See Engine oil check (page 214). I Power steering fluid reservoir: See Power steering fluid check (page 215). J Engine coolant reservoir: See Engine coolant check (page 214). 1 The filler caps and the engine oil dipstick are coloured for easy identification. 212 Maintenance ENGINE OIL DIPSTICK - 1.8L DURATORQ-TDCI (LYNX) DIESEL ENGINE OIL DIPSTICK - 2.0L DURATEC-HE (MI4)/2.3L DURATEC-HE (MI4) A B B A E92036 A MIN B MAX ENGINE OIL DIPSTICK - 2.5L DURATEC (VI5) A E95527 B A MIN B MAX ENGINE OIL DIPSTICK - 2.0L DURATORQ-TDCI (DW) DIESEL/2.2L DURATORQTDCI (DW) DIESEL E95542 A MIN B MAX A E95543 213 A MIN B MAX B Maintenance ENGINE OIL CHECK CAUTION Do not top up further than the MAX mark. CAUTION Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine. Top up with fluid that meets the Ford specification. See Technical specifications (page 216). Note: The oil consumption of new engines reaches its normal level after approximately 5 000 kilometres (3 000 miles). ENGINE COOLANT CHECK Checking the coolant level WARNING Checking the oil level Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. CAUTION Make sure that the level is between the MIN and the MAX marks. CAUTION Note: Check the level before starting the engine. Make sure that the level is between the MIN and the MAX marks. Note: Make sure that your vehicle is on level ground. Note: Oil expands when it is hot. The level may therefore extend a few millimetres beyond the MAX mark. Note: Coolant expands when it is hot. The level may therefore extend beyond the MAX mark. Remove the dipstick and wipe it with a clean, lint free cloth. Replace the dipstick and remove it again to check the oil level. If the level is at the MIN mark, top up immediately. Topping up If the level is at the MIN mark, top up immediately. WARNINGS Only top up when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down. Topping up WARNINGS Only top up when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down. Do not remove the filler cap when the engine is running. Do not remove the filler cap when the engine is hot. Wait for the engine to cool down. Do not remove the filler cap when the engine is running. Unscrew the cap slowly. Any pressure will escape slowly as you unscrew the cap. Remove the filler cap. 214 Maintenance POWER STEERING FLUID CHECK CAUTIONS Do not spill coolant on any part of the engine. WARNING Do not top up further than the MAX mark. Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. Top up with fluid that meets the Ford specification. See Technical specifications (page 216). CAUTION BRAKE AND CLUTCH FLUID CHECK Make sure that the level is between the MIN and the MAX marks. WARNINGS Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. If the level is at the MIN mark, top up immediately. Topping up Remove the filler cap. If the level is at the MIN mark, have the system checked by a properly trained technician as soon as possible. CAUTION Do not top up further than the MAX mark. Note: The brake and the clutch systems are supplied from the same reservoir. Top up with fluid that meets the Ford specification. See Technical specifications (page 216). Top up with fluid that meets the Ford specification. See Technical specifications (page 216). WASHER FLUID CHECK The front and rear washer systems are supplied from the same reservoir. 215 Maintenance TECHNICAL SPECIFICATIONS Vehicle fluids Item Recommended fluid * Specification Engine oil Castrol Engine Oil Power steering fluid Ford or Motorcraft Power Steering Fluid WSS-M2C204-A2 Coolant Motorcraft SuperPlus Antifreeze WSS-M97B44-D Brake fluid Ford or Motorcraft Super DOT 4 Brake Fluid WSS-M2C913-C ESD-M6C57-A * Providing it meets the specification defined by WSS-M2C913-C, you can also use Ford Engine Oil or an alternative engine oil. Topping up the oil: If you are unable to find an oil that meets the specification defined by WSS-M2C913-C, you must use SAE 5W-30 (preferred), SAE 5W-40 (except vehicles with E85 fuel) or SAE 10W-40 that meets the specification defined by either ACEA A5/B5 (preferred) or ACEA A3/B3. Using these oils can result in longer engine cranking periods, reduced engine performance, reduced fuel economy and increased emission levels. Castrol engine oil recommended. E115472 Capacities Variant Item Capacity in litres (gallons) All Power steering fluid All Windscreen washer system 3.9 (0.9) 2.0L Duratec-HE Engine lubrication system including the oil filter 4.3 (1.0) 2.0L Duratec-HE Engine lubrication system excluding the oil filter 3.9 (0.9) 2.0L Duratec-HE Engine cooling system 6.2 (1.4) 216 MAX mark Maintenance Variant Item Capacity in litres (gallons) 2.0L Duratec-HE Fuel tank 70 (15.4) 2.3L Duratec-HE Engine lubrication system including the oil filter 4.3 (1.0) 2.3L Duratec-HE Engine lubrication system excluding the oil filter 3.9 (0.9) 2.3L Duratec-HE Engine cooling system 6.9 (1.5) 2.3L Duratec-HE Fuel tank 70 (15.4) 2.5L Duratec-ST Engine lubrication system including the oil filter 5.8 (1.3) 2.5L Duratec-ST Engine lubrication system excluding the oil filter 5.5 (1.2) 2.5L Duratec-ST Engine cooling system 7.1 (1.6) 2.5L Duratec-ST Fuel tank 70 (15.4) 1.8L Duratorq-TDCi Engine lubrication system including the oil filter 5.6 (1.2) 1.8L Duratorq-TDCi Engine lubrication system excluding the oil filter 5.0 (1.1) 1.8L Duratorq-TDCi Engine cooling system 7.9 (1.7) 1.8L Duratorq-TDCi Fuel tank 70 (15.4) 2.0L Duratorq-TDCi Engine lubrication system including the oil filter 5.5 (1.2) 2.0L Duratorq-TDCi Engine lubrication system excluding the oil filter 5.0 (1.1) 2.0L Duratorq-TDCi Engine cooling system 8.1 (1.8) 2.0L Duratorq-TDCi Fuel tank 70 (15.4) 2.2L Duratorq-TDCi Engine lubrication system including the oil filter 6.0 (1.3) 2.2L Duratorq-TDCi Engine lubrication system excluding the oil filter 5.4 (1.2) 2.2L Duratorq-TDCi Engine cooling system 8.4 (1.9) 2.2L Duratorq-TDCi Fuel tank 70 (15.4) 217 Vehicle care Cleaning the chrome trim CLEANING THE EXTERIOR CAUTION WARNING Do not use abrasives or chemical solvents. Use soapy water. If you use a car wash with a waxing cycle, make sure that you remove the wax from the windscreen. Body paintwork preservation CAUTIONS Prior to using a car wash facility check the suitability of it for your vehicle. CAUTIONS Do not polish your vehicle in strong sunshine. Do not allow polish to touch plastic surfaces. It could be difficult to remove. Some car wash installations use water at high pressure. This could damage certain parts of your vehicle. Do not apply polish to the windscreen or rear window. This could cause the wipers to become noisy and they may not clear the window properly. Remove the aerial before using an automatic car wash. Switch the heater blower off to prevent contamination of the fresh air filter. We recommend that you wax the paintwork once or twice a year. We recommend that you wash your vehicle with a sponge and lukewarm water containing a car shampoo. CLEANING THE INTERIOR Cleaning the headlamps Seat belts WARNINGS Do not use abrasives, or chemical solvents to clean them. CAUTIONS Do not scrape the headlamp lenses or use abrasives, alcoholic solvents or chemical solvents to clean them. Do not allow moisture to penetrate the seat belt retractor mechanism. Do not wipe the headlamps when they are dry. Clean the seat belts with interior cleaner or water applied with a soft sponge. Let the seat belts dry naturally, away from artificial heat. Cleaning the rear window CAUTION Do not scrape the inside of the rear window or use abrasives or chemical solvents to clean it. Use a clean, lint free cloth or a damp chamois leather to clean the inside of the rear window. 218 Vehicle care Instrument cluster screens, LCD screens, radio screens WARNING Do not use abrasives, alcoholic solvents or chemical solvents to clean them. REPAIRING MINOR PAINT DAMAGE CAUTION Remove apparently harmless looking substances from the paintwork immediately (e.g. bird droppings, tree resins, insect remains, tar spots, road salt and industrial fall out). You should repair paintwork damage caused by stones from the road or minor scratches as soon as possible. A choice of products is available from your Ford Dealer. Read and follow the manufacturer’s instructions. 219 Vehicle battery 1. Position the vehicles so that they do not touch one another. 2. Switch off the engine and any electrical equipment. 3. Connect the positive (+) terminal of vehicle B with the positive (+) terminal of vehicle A (cable C). 4. Connect the negative (-) terminal of vehicle B to the ground connection of vehicle A (cable D). See Battery connection points (page 221). USING BOOSTER CABLES CAUTIONS Connect batteries with only the same nominal voltage. Always use booster cables with insulated clamps and adequate size cable. Do not disconnect the battery from the vehicle’s electrical system. CAUTIONS Do not connect to the negative (–) terminal of the flat battery. To connect the booster cables Make sure that the cables are clear of any moving parts. A To start the engine 1. C Run the engine of vehicle B at moderately high speed. 2. Start the engine of vehicle A. 3. Run both vehicles for a minimum of three minutes before disconnecting the cables. D CAUTION Do not switch on the headlamps when disconnecting the cables. The peak voltage could blow the bulbs. B Disconnect the cables in the reverse order. E102925 A Flat battery vehicle B Booster battery vehicle C Positive connection cable D Negative connection cable 220 Vehicle battery BATTERY CONNECTION POINTS E114494 CAUTION Do not connect to the negative (–) terminal of the flat battery. 221 Wheels and tyres GENERAL INFORMATION CAUTION Use only the specified jacking points. If you use other positions, you may damage the body, steering, suspension, engine, braking system or the fuel lines. CAUTIONS Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. Note: Use a jack with a minimum lifting capacity of 1.5 tonnes and a lifting plate with a minimum diameter of 80 millimetres (3.1 inches). If you change the diameter of the tyres from that fitted at the factory, the speedometer may not display the correct speed. Take the vehicle to your dealer to have the engine management system reprogrammed. A decal with tyre pressure data is located in the driver’s door opening at the B-pillar. Check and set the tyre pressure at the ambient temperature in which you are intending to drive the vehicle and when the tyres are cold. CHANGING A ROAD WHEEL Locking wheel nuts You can obtain a replacement locking wheel nut key and replacement locking wheel nuts from your dealer using the reference number certificate. A Vehicle jack Your vehicle is not equipped with a vehicle jack or a wheel brace. It is recommended to use a workshop type hydraulic jack for changing between summer and winter tyres. E90708 Jacking and lifting points Indentations in the sills A show the location of the jacking points. WARNING Never place anything between the jack and the ground, or the jack and the vehicle. 222 Wheels and tyres WARNINGS Make sure that the vehicle is on firm, level ground with the wheels pointing straight ahead. Switch off the ignition and apply the parking brake. If your vehicle has a manual transmission, select first or reverse gear. If it has an automatic transmission, select park. Have the passengers leave the vehicle. E93020 Secure the diagonally opposite wheel with an appropriate block or wheel chock. Vehicles with side skirts Make sure that the arrows on directional tyres point in the direction of rotation when the vehicle is moving forwards. If you have to fit a spare wheel with the arrows pointing in the opposite direction, have the tyre refitted in the correct direction by a properly trained technician. Do not work underneath the vehicle when it is supported only by a jack. Make sure that the jack is vertical to the jacking point and the base is flat on the ground. E90709 Place the lifting plate through the cut out on the underside of the skirt. CAUTION Do not lay alloy wheels face down on the ground, this will damage the paint. Removing a road wheel WARNINGS Park your vehicle in such a position that neither the traffic nor you are hindered or endangered. 1. Set up a warning triangle. 223 Remove the hub cap or cover. Wheels and tyres Note: You can use wheel nuts designed for use with alloy wheels with steel wheels. Note: Make sure the wheel and hub contact surfaces are free from foreign matter. Note: Make sure that the cones on the wheel nuts are against the wheel. 1. Install the wheel. 2. Install the wheel nuts finger tight. E71948 2. Install the locking wheel nut key. 3. Slacken the wheel nuts. 4. Jack up the vehicle until the tyre is clear of the ground. 5. Remove the wheel nuts and the wheel. Installing a road wheel WARNINGS Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. See Technical specifications (page 232). E71948 3. Install the locking wheel nut key. 1 Do not fit run flat tyres on vehicles that were not originally fitted with them. Please contact your dealer for more details regarding compatibility. 4 3 CAUTION Do not install alloy wheels using wheel nuts designed for use with steel wheels. 5 E75442 224 2 Wheels and tyres 4. Partially tighten the wheel nuts in the sequence shown. 5. Lower the vehicle and remove the jack. 6. Fully tighten the wheel nuts in the sequence shown. See Technical specifications (page 232). 7. Install the hub cap or cover using the ball of your hand. The tyre repair kit seals most tyre punctures [with a diameter of up to six millimetres (1/4 inch)] to temporarily restore mobility. Observe the following rules when using the kit: • WARNING Have the wheel nuts checked for tightness and the tyre pressure checked as soon as possible. • TYRE REPAIR KIT Drive with caution and avoid making sudden steering or driving manoeuvres, especially if the vehicle is heavily loaded or you are towing a trailer. The kit will provide you with an emergency temporary repair, enabling you to continue your journey to the next vehicle or tyre dealer, or to drive a maximum distance of 200 kilometres (125 miles). Do not exceed a maximum speed of 80 km/h (50 mph). Keep the kit out of the reach of children. Only use the kit when the ambient temperature is between –30°C (-22°F) and +70°C (+158°F). Your vehicle is not equipped with a spare tyre, but does include an emergency tyre repair kit that can be used to repair one flat tyre. • The tyre repair kit is located in the underfloor storage compartment. See Storage compartments (page 131). • General information Using the tyre repair kit • WARNINGS Depending on the type and extent of tyre damage, some tyres can only be partially sealed or not sealed at all. Loss of tyre pressure can affect vehicle handling, leading to loss of vehicle control. WARNINGS Compressed air can act as an explosive or propellant. Never leave the tyre repair kit unattended while in use. CAUTION Do not use the tyre repair kit if the tyre has already been damaged as a result of being driven under inflated. Do not keep the compressor operating for more than 10 minutes. Do not try to seal damage other than that located within the visible tread of the tyre. Note: Use the tyre repair kit only for the vehicle with which it was supplied. Do not try to seal damage to the tyre’s sidewall. 225 Wheels and tyres • • • • • • Park your vehicle at the roadside so that you do not obstruct the flow of traffic and so that you are able to use the kit without being in danger. Apply the parking brake, even if you have parked on a level road, to make sure that the vehicle will not move. Do not attempt to remove foreign objects like nails or screws penetrating the tyre. Leave the engine running while the kit is in use, but not if the vehicle is in an enclosed or poorly ventilated area (for example, inside a building). In these circumstances, switch the compressor on with the engine turned off. Replace the sealant bottle with a new one before the expiry date (see top of bottle) is reached. Inform all other users of the vehicle that the tyre has been temporarily sealed with the tyre repair kit and make them aware of the special driving conditions to be observed. WARNINGS The sealant contains natural rubber latex. Avoid contact with skin and clothing. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. If the tyre inflation pressure does not reach 1.8 bar (26 psi) within seven minutes, the tyre may have suffered excessive damage, making a temporary repair impossible. In this case, do not continue driving with this tyre. CAUTION Screwing the bottle onto the bottle holder will pierce the seal of the bottle. Do not unscrew the bottle from the holder as the sealant will escape. Inflating the tyre WARNINGS Check the sidewall of the tyre prior to inflation. If there are any cracks, bumps or similar damage, do not attempt to inflate the tyre. Do not stand directly beside the tyre while the compressor is pumping. Watch the sidewall of the tyre. If any cracks, bumps or similar damage appear, turn off the compressor and let the air out by means of the pressure relief valve B. Do not continue driving with this tyre. 226 Wheels and tyres A K I H C D E94973 G F A Protective cap B Pressure relief valve C Hose D Orange cap E Bottle holder F Pressure gauge G Power plug with cable H Compressor switch I Label Bottle lid Sealant bottle 1. Open the lid of the tyre repair kit. 2. Peel off the label I showing the maximum permissible speed of 80 km/h (50 mph) from the casing and attach it to the instrument panel in the driver’s field of view. Make sure the label does not obscure anything important. 3. Take the hose C and the power plug with cable G out of the kit. 4. Unscrew the orange cap D and the bottle lid J. 5. Screw the sealant bottle K clockwise into the bottle holder E fully tight. 6. Remove the valve cap from the damaged tyre. 7. Detach the protective cap A from the hose C and screw the hose C firmly onto the valve of the damaged tyre. 8. Make sure that the compressor switch H is in position 0. 9. Insert the power plug G into the cigar lighter socket or auxiliary power socket. See Cigar lighter (page 129). See Auxiliary power sockets (page 129). 10. Start the engine. 11. Move the compressor switch H to position 1. 12. Inflate the tyre for no longer than seven minutes to an inflation pressure of minimum 1.8 bar (26 psi) and a maximum of 3.5 bar (51 psi). Move the compressor switch H to position 0 and check the current tyre pressure with pressure gauge F. 13. Remove the power plug G from the cigar lighter socket or auxiliary power socket. B J J K E 227 Wheels and tyres 14. Quickly unscrew the hose C from the tyre valve and replace the protective cap A. Fasten the valve cap again. 15. Leave the sealant bottle K in the bottle holder E. Make sure the kit, the bottle lid and the orange cap are stored safely, but still easily accessible in the vehicle. The kit will be required again when you check the tyre pressure. Immediately drive approximately three kilometres (two miles) so that the sealant can seal the damaged area. 16. 17. 4. Follow the inflation procedure once again to top up the tyre. 5. Check the tyre pressure again from the pressure gauge F. If the tyre pressure is too high, deflate the tyre to the specified pressure using the pressure relief valve B. 6. Once you have inflated the tyre to its correct tyre pressure, move the compressor switch H to position 0, remove the power plug G from the socket, unscrew the hose C, fasten the valve cap and replace the protective cap A. 7. Leave the sealant bottle K in the bottle holder E and store the kit away safely in its original location. 8. Drive to the nearest tyre specialist to get the damaged tyre replaced. Before the tyre is removed from the rim, inform your tyre dealer that the tyre contains sealant. Renew the kit as soon as possible after it has been used once. Note: When pumping in the sealant through the tyre valve, the pressure may rise up to 6 bar (87 psi) but will drop again after about 30 seconds. WARNING If you experience heavy vibrations, unsteady steering behaviour or noises while driving, reduce your speed and drive with caution to a place where it is safe for you to stop the vehicle. Recheck the tyre and its pressure. If the tyre pressure is less than 1.3 bar (19 psi) or if there are any cracks, bumps or similar damage visible, do not continue driving with this tyre. Note: Remember that emergency roadside tyre repair kits only provide temporary mobility. Regulations concerning tyre repair after usage of tyre repair kit may differ from country to country. You should consult a tyre specialist for advice. WARNING Checking the tyre pressure Before driving, make sure the tyre is adjusted to the recommended inflation pressure. See Technical specifications (page 232). Monitor the tyre pressure until the sealed tyre is replaced. 1. Stop the vehicle after driving approximately three kilometres (two miles). Check, and where necessary, adjust the pressure of the damaged tyre. 2. Attach the kit and read the tyre pressure from the pressure gauge F. 3. If the pressure of the sealant-filled tyre is 1.3 bar (19 psi) or more, adjust it to the specified pressure. See Technical specifications (page 232). Empty sealant bottles can be disposed of together with normal household waste. Return remains of sealant to your dealer or dispose of it in compliance with local waste disposal regulations. 228 Wheels and tyres When a standard tyre experiences a drastic loss of inflation pressure, the rim of the wheel brings the full weight of the vehicle to bear on the collapsed sidewalls. You can barely manoeuvre the vehicle and the tyre is destroyed. RUN FLAT TYRES Principle of operation Standard tyre A Run flat tyres have sturdy, reinforced sidewalls that support the rim should the tyre suffer a loss of inflation pressure. B What to do if a run flat tyre has a puncture C Due to the run-flat properties of these tyres, you may not notice any tyre defect. Your vehicle is equipped with a tyre pressure monitoring system that alerts you to any drop in tyre pressure. See Technical specifications (page 232). E75207 A Wheel rim position with correct tyre pressure B Wheel rim position with insufficient tyre pressure • C Tyre • In the event of a tyre defect: Run flat tyre B A • • immediately slow down to a maximum speed of 80 km/h (50 mph) avoid sudden or erratic braking and steering manoeuvres and be especially careful negotiating bends do not drive more than 80 kilometres (50 miles) after the defect is detected have the defective tyre replaced as soon as possible. Replacing run flat tyres D WARNINGS Make sure that the workshop is aware that your vehicle is equipped with special run flat tyres. C E87667 A Wheel rim position with correct tyre pressure B Wheel rim position with insufficient tyre pressure C Tyre D Reinforced sidewall Never repair or reuse run flat tyres that are damaged or have been driven on run flat. If a run flat tyre has to be replaced, have the respective wheel rim inspected for any damage. 229 Wheels and tyres Examine the tyres regularly for cuts, foreign objects and uneven wear of the tread. Uneven wear could mean that the wheel alignment is outside specification. WARNINGS Do not fit a mixture of run flat and standard tyres. In isolated cases, a standard tyre can be temporarily mounted on a vehicle otherwise equipped with run flat tyres. It must be pointed out to the driver that the standard tyre has no runflat properties. Check the tyre pressures (including the spare) when cold, every two weeks. USING WINTER TYRES Do not fit run flat tyres on vehicles that were not originally fitted with them. Please contact your dealer for more details regarding compatibility. CAUTION Make sure that you use the correct wheel nuts for the type of wheel the winter tyres are fitted to. Run flat tyres may be sold and mounted only by specially trained and certified tyre dealers. If winter tyres are used, make sure that the tyre pressures are correct. See Technical specifications (page 232). TYRE CARE USING SNOW CHAINS WARNINGS Do not exceed 50 km/h (30 mph). Do not use snow chains on snow-free roads. Only fit snow chains to specified tyres. See Technical specifications (page 232). E70415 To make sure the front and rear tyres of your vehicle wear evenly and last longer, we recommend that you swap the tyres from front to rear and vice versa at regular intervals of between 5 000 and 10 000 km (3 000 and 6 000 miles). CAUTION If your vehicle is fitted with wheel trims, remove them before fitting snow chains. CAUTION Note: The ABS will continue to operate normally. Do not scrub the sidewalls of the tyres when you are parking. Only use small link snow chains. Only use snow chains on the front wheels. If you have to mount a kerb, do so slowly and approach it with the wheels at right-angles to the kerb. 230 Wheels and tyres Vehicles with stability control (ESP) If a low pressure warning message is displayed in the information display, check the tyre pressures as soon as possible and inflate them to the recommended pressure. See Technical specifications (page 232). If this happens frequently, have the cause determined and rectified as soon as possible. Vehicles with stability control (ESP) may exhibit some unusual driving characteristics which can be avoided by switching the system off. See Using stability control (page 153). TYRE PRESSURE MONITORING SYSTEM Checking the tyre pressures Note: If the tyre pressures are greater than or equal to 3.3 bar (48 lbf/in²), you will see the + symbol below the pressure value. The system only measures pressure up to 3.3 bar (48 lbf/in²). The + symbol indicates that the tyre pressures may be higher. WARNINGS The system does not relieve you of your responsibility to regularly check the tyre pressures. The system will only provide a low tyre pressure warning. It will not inflate the tyres. Note: Type 3 instrument clusters have a slightly different menu structure. Select Settings first to access Information. The system may take longer to detect low pressure in the tyres if you have fitted snow chains. 1. Do not drive on significantly under-inflated tyres. This may cause the tyres to overheat and fail. Under-inflation reduces fuel efficiency, tyre tread life and may also affect your ability to drive the vehicle safely. 2. 3. CAUTIONS Do not bend or damage the valves when you are inflating the tyres. 4. 5. Have tyres installed by properly trained technicians. The system monitors the pressure in the tyres using sensors located on the wheels and a receiver located in your vehicle. When the system detects low pressure in the tyres, a warning message is displayed in the information display. See Information messages (page 95). Press the right arrow button on the steering wheel to enter the main menu. Highlight Information with the up and down buttons and press the right arrow button. Highlight Tyre Pressures with the up and down buttons and press the right arrow button. Highlight the desired setting and press the OK button to confirm the setting. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display. Setting the vehicle load Note: Type 3 instrument clusters have a slightly different menu structure. Select Settings first to access Setup. 231 Wheels and tyres Correct tyre pressure settings depend on vehicle load. See Technical specifications (page 232). The system can only detect low pressure if you have entered the current vehicle load. 3. Highlight Tyre Pressures with the up and down buttons and press the right arrow button. 4. Highlight the desired setting and press the OK button to confirm the setting. 5. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display. 1. Press the right arrow button on the steering wheel to enter the main menu. 2. Highlight Setup with the up and down buttons and press the right arrow button. TECHNICAL SPECIFICATIONS Wheel nut torque Wheel type Nm (Ib-ft) All 170 (125) Tyre pressures (cold tyres) Up to 160 km/h (100 mph) Normal load Variant Tyre size Full load Front Rear Front Rear bar (psi) bar (psi) bar (psi) bar (psi) 2.0L Duratec-HE and 2.3L DuratecHE 215/60 R 16 * 2.2 (32) 2.4 (35) 2.6 (38) 3.1 (45) 2.0L Duratec-HE and 2.3L DuratecHE 225/50 R 17 2.2 (32) 2.2 (32) 2.6 (38) 3.1 (45) 2.0L Duratec-HE and 2.3L DuratecHE 235/45 R 18 2.2 (32) 2.2 (32) 2.6 (38) 3.1 (45) All except 2.0L Duratec-HE and 2.3L Duratec-HE 215/60 R 16 * 2.4 (35) 2.4 (35) 2.6 (38) 3.1 (45) 232 Wheels and tyres Normal load Variant Tyre size Full load Front Rear Front Rear bar (psi) bar (psi) bar (psi) bar (psi) All except 2.0L Duratec-HE and 2.3L Duratec-HE 225/50 R 17 2.4 (35) 2.2 (32) 2.6 (38) 3.1 (45) All except 2.0L Duratec-HE and 2.3L Duratec-HE 235/45 R 18 2.4 (35) 2.2 (32) 2.6 (38) 3.1 (45) * Only fit snow chains to specified tyres. Continuous speed in excess of 160 km/h (100 mph) Normal load Variant Tyre size Full load Front Rear Front Rear bar (psi) bar (psi) bar (psi) bar (psi) 2.0L Duratec-HE and 2.3L DuratecHE 215/60 R 16 2.2 (32) 2.4 (35) 2.6 (38) 3.1 (45) 2.0L Duratec-HE and 2.3L DuratecHE 225/50 R 17 2.2 (32) 2.2 (32) 2.6 (38) 3.1 (45) 2.0L Duratec-HE and 2.3L DuratecHE 235/45 R 18 2.2 (32) 2.2 (32) 2.6 (38) 3.1 (45) 2.5L Duratec-ST 215/60 R 16 2.6 (38) 2.6 (38) 2.8 (41) 3.2 (46) 2.5L Duratec-ST 225/50 R 17 2.6 (38) 2.6 (38) 2.8 (41) 3.2 (46) 2.5L Duratec-ST 235/45 R 18 2.6 (38) 2.6 (38) 2.8 (41) 3.2 (46) 1.8L Duratorq-TDCi and 2.0L DuratorqTDCi 215/60 R 16 2.4 (35) 2.4 (35) 2.6 (38) 3.1 (45) 1.8L Duratorq-TDCi and 2.0L DuratorqTDCi 225/50 R 17 2.4 (35) 2.2 (32) 2.6 (38) 3.1 (45) 233 Wheels and tyres Normal load Variant Tyre size Full load Front Rear Front Rear bar (psi) bar (psi) bar (psi) bar (psi) 1.8L Duratorq-TDCi and 2.0L DuratorqTDCi 235/45 R 18 2.4 (35) 2.2 (32) 2.6 (38) 3.1 (45) 2.2L Duratorq-TDCi 215/60 R 16 2.5 (36) 2.4 (35) 2.6 (38) 3.1 (45) 2.2L Duratorq-TDCi 225/50 R 17 2.5 (36) 2.3 (33) 2.6 (38) 3.1 (45) 2.2L Duratorq-TDCi 235/45 R 18 2.5 (36) 2.3 (33) 2.6 (38) 3.1 (45) 234 Vehicle identification VEHICLE IDENTIFICATION PLATE B A E VEHICLE IDENTIFICATION NUMBER (VIN) D C E85610 E87496 A Vehicle identification number B Gross vehicle weight C Gross train weight D Maximum front axle weight E Maximum rear axle weight The vehicle identification number is stamped into the floor panel on the right-hand side, beside the front seat. It is also shown on the left-hand side of the instrument panel. The vehicle identification number and maximum weights are shown on a plate located on the lock side of the passenger door aperture at the bottom. 235 Technical specifications TECHNICAL SPECIFICATIONS Vehicle dimensions S-MAX D A C E B E75180 Item Dimension description Dimension in mm (inches) A Maximum length 4 768 (187.7) B Overall width including exterior mirrors 2 154 (84.8) Overall height at EC kerb weight 1 610 - 1 658 (63.4 - 65.3) C 236 Technical specifications Item Dimension description D Wheelbase 2 850 (112.2) Front track 1 578 - 1 588 (62.1 62.5) Rear track 1 600 - 1 610 (63 - 63.4) E E Galaxy E76860 237 Dimension in mm (inches) Technical specifications Item Dimension description Dimension in mm (inches) A Maximum length 4 820 (189.8) B Overall width including exterior mirrors 2 154 (84.8) Overall height at EC kerb weight without roof bars 1 691 - 1 764 (66.6 - 69.4) C C D E E Overall height at EC kerb weight including roof bars 1 770 - 1 807 (69.7 - 71.1) Wheelbase 2 850 (112.2) Front track 1 578 - 1 588 (62.1 62.5) Rear track 1 600 - 1 610 (63 - 63.4) 238 Technical specifications Towing equipment dimensions S-MAX A B C D E F G H E75182 Item Dimension description Dimension in mm (inches) A Bumper – end of tow ball 102 (4.02) B Attachment point – centre of tow ball 16 (0.63) C Wheel centre – centre of tow ball 1 079 (42.48) D Centre of tow ball – side member 438 (17.24) E Inner side of side member 876 (34.49) F Centre of tow ball – centre 1. attachment point 363 (14.29) 239 Technical specifications Item Dimension description Dimension in mm (inches) G Centre of tow ball – centre 2. attachment point 424 (16.69) H Centre of tow ball – centre 3. attachment point 636 (25.04) Galaxy A B C D E F G H E75181 Item Dimension description Dimension in mm (inches) A Bumper – end of tow ball 101 (3.98) B Attachment point – centre of tow ball 16 (0.63) C Wheel centre – centre of tow ball 1 128 (44.41) 240 Technical specifications Item Dimension description D Centre of tow ball – side member 438 (17.24) E Inner side of side member 876 (34.49) F Centre of tow ball – centre 1. attachment point 412 (16.22) G Centre of tow ball – centre 2. attachment point 473 (18.62) H Centre of tow ball – centre 3. attachment point 685 (26.97) 241 Dimension in mm (inches) Telephone Note: If there is an ongoing call when the phone in use is selected as the new active phone, the call is transferred to the vehicle audio system. GENERAL INFORMATION CAUTION Using the system with the engine off will drain the battery. Note: Even if connected to the car system, your phone can still be used in the usual way. This section describes the functions and features of the Bluetooth mobile phone hands free system. Requirements for Bluetooth connection The Bluetooth mobile phone part of the system provides interaction with the audio or navigation system and your mobile phone. It allows you to use the audio or navigation system to make and receive calls without having to use your mobile phone. The following are required before a Bluetooth phone connection can be made. 1. Compatibility of phones CAUTION 2. As no common agreement exists, mobile phone manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the phone and hands-free system, which in some cases may significantly degrade the system performance. To avoid this situation, only recommended phones should be used. 3. 4. 5. Please visit the website www.fordmobile-connectivity.com for full details. The Bluetooth feature must be activated on the phone and on the audio unit. Make sure the Bluetooth menu option in the audio unit is set to ON. For information on phone settings, refer to your phone user guide. The private mode must not be activated on the Bluetooth phone. Search for audio device. Select Ford Audio. Enter the code number shown on the vehicle display using the phone keypad. If no code number is shown on the display, enter the Bluetooth PIN number 0000 using the phone keypad. Now enter the Bluetooth PIN number shown on the vehicle display. Note: A phone call will be disconnected if the audio unit is switched off. If the ignition key is turned to the off position the phone call will remain in progress. BLUETOOTH SETUP Before you can use your telephone with your vehicle it must be bonded to the vehicle telephone system. TELEPHONE SETUP Handling of phones After start up access to the phonebook list can be delayed for several minutes, depending upon the size. Phonebook Up to six Bluetooth devices can be bonded to the vehicle system. 242 Telephone Phonebook categories Select the phone from the active phone menu. Depending on your phonebook entry, different categories can be displayed in the audio unit. Turning the ignition and radio or navigation unit back on again, the last active phone is picked up by the system. For example: M Mobile O Office H Home F Fax Note: In some cases the Bluetooth connection must also be confirmed on the phone. Bond another Bluetooth phone Bond a new Bluetooth phone as described in the requirements for a Bluetooth connection. Note: Entries may be displayed without a category attachment. Phones stored in the system are accessible by using the phone list on the audio unit. The category can also be indicated as an icon: Note: A maximum of six devices may be bonded. If six Bluetooth devices have already been bonded, one of these has to be debonded in order to bond a new device. Phone E87990 Mobile TELEPHONE CONTROLS E87991 Home Remote control E87992 Voice, accept and reject button Office 1 E87993 2 Fax E87994 Making a phone an active phone When using the system for the first time, no phone is connected to the system. E87662 Bluetooth phone After bonding a Bluetooth phone to the system, this becomes the active phone. For further information refer to the phone menu. 1 Voice button 2 Accept and reject button The VOICE button is used to activate or switch off the Voice control. 243 Telephone On vehicles with an accept and reject button, phone calls can be accepted and rejected by pressing the appropriate button. 4. Press the seek buttons to select the desired phone number. Note: Some audio units have the accept and reject buttons on the front bezel. These operate in the same way. 5. Press the PHONE or the call accept button to dial the selected phone number. USING THE TELEPHONE VEHICLES WITHOUT: NAVIGATION SYSTEM Dialling a number using the address book - Sony radio Note: Press and hold the seek button to skip to the next letter in the alphabet. You can access your phone address book via Bluetooth. The entries will appear in the unit display. This chapter describes the phone functions of the audio unit. 1. Press the PHONE button. 2. Press the seek button until the phone book is shown. 3. Press the up/down arrow buttons to select the desired phone number. Note: Refer to your audio guide for details of the controls. An active phone must be present. Even if connected to the audio unit, your phone can still be used in the usual way. Note: Press and hold the up/down arrow buttons to skip to the next letter in the alphabet. Note: You can exit the phone menu by pressing any source button CD, AM/FM or AUX. Making a call 4. Press the PHONE or the call accept button to dial the selected phone number. Dialling a number using voice control Dialling a number using the telephone keypad Phone numbers can be dialled using voice control. See Telephone commands (page 261). If you have an audio unit with a telephone keypad (buttons 0-9, * and #): 1. Press the call accept button. Press the PHONE button if you have a Sony radio. 2. Dial the number using the telephone keypad on the audio unit. 3. Press the call accept button. Dialling a number using the address book You can access your phone address book via Bluetooth. The entries will appear in the unit display. 1. Note: If you enter an incorrect digit whilst entering a phone number, press the seek left button to erase the last digit. A long press will erase the complete string of digits. Press the PHONE or the call accept button. 2. Press the MENU button. 3. Keep pressing the MENU button until PHONEBOOK appears. Press and hold 0 to enter a + digit. 244 Telephone Ending a call 2. Press the call accept button a second time to dial the number. Calls can be ended by pressing the call reject button. Receiving an incoming call Audio units without a telephone keypad can also end a call by pressing either PHONE, CD, AM/FM or ON/OFF, or by pressing the MODE button on the remote control Accepting an incoming call Incoming calls can be accepted by pressing either the call accept button, the PHONE button or the MODE button on the remote control. Redialling a number 1. Rejecting an incoming call Press the PHONE or the call accept button. Incoming calls can be rejected by pressing the call reject button. 2. Press the MENU button. 3. Select the CALL OUT list or the CALL IN list. On some audio units, select the MISSED, INCOMING or OUTGOING calls list. Audio units without a telephone keypad can also reject a call by pressing either PHONE, CD, AM/FM or ON/OFF. Receiving a second incoming call Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled. Note: The second incoming call function must be activated in your phone. 4. Press the seek button on the audio unit. 5. Press the PHONE or the call accept button to dial the desired phone number. If there is an incoming call whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call. Redialling a number - Sony radio Accepting a second incoming call 1. Press the PHONE or the call accept button. 2. Press the seek button until the desired list is displayed. Second incoming calls can be accepted by pressing either the call accept button, the PHONE button, or the MODE button on the remote control. Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled. Rejecting a second incoming call Second incoming calls can be rejected by pressing the call reject button. Units without a telephone keypad can also reject a second incoming call by pressing the CD button, or the AM/FM button. 3. Press the up/down buttons to select the desired phone number. 4. Press the PHONE or the call accept button to dial the phone number. Muting the microphone Redialling the last dialled number Sony radio 1. During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display. Press the call accept button. 245 Telephone Debonding a bonded phone Audio units with green call accept button A bonded phone can be deleted from the system at any time, unless a phone call is in progress. Press the call accept button. Press the button once again to turn this function off. 1. Audio units without green call accept button 2. Press the MENU button on the audio unit. 3. Select the DEBOND option on the audio unit. 4. Scroll through the different phones by using the seek buttons and display the phone to be debonded. 5. Press the MENU button to select the phone which is to be debonded. Press the seek up or down button. Press the button once again to turn this function off. Changing the active phone Note: Phones must be bonded to the system before they can be made active. Using the station storage button Note: This process is only for audio units without a telephone keypad. Debonding a bonded phone Sony radio 1. Press the PHONE button on the audio unit. 2. Press the preset number required (using the station preset buttons 1 6). A bonded phone can be deleted from the system at any time, unless a phone call is in progress. 1. Press the PHONE button. 2. Press the up/down arrow buttons until you reach the DEBOND option. 3. Scroll through the different phones by using the seek buttons and display the phone to be debonded. 4. Press the OK button to be debond. Using the audio unit menu Note: After bonding a phone to the system, this becomes the active phone. 1. Press the PHONE or call accept button. Press the PHONE or call accept button. 2. Press the MENU button on the audio unit. 3. Select the ACTIVE PHONE option on the audio unit. 4. Scroll through the different stored phones by using the seek buttons to display the bonded phones. 5. Press the MENU button to select the phone which is to be the active phone. USING THE TELEPHONE VEHICLES WITH: NAVIGATION SYSTEM This chapter describes the phone functions of the Navigation System. Note: Refer to your Navigation System guide for details of the controls. An active phone must be present. 246 Telephone Accepting a second incoming call Even if connected to the Navigation System, your phone can still be used in the usual way. Second incoming calls can be accepted by pressing either the call accept button, the MODE button on the remote control, the PHONE button on the unit or by using the ACCEPT option in the menu. Making a call Dialling a number Phone numbers can be dialled using voice control. See Voice control (page 249). Note: This will cancel the ongoing call. Ending a call Second incoming calls can be rejected by pressing either the call reject button, or one of the following buttons on the unit: CD, AM/FM. Rejecting a second incoming call Calls can be ended by pressing either the END button, the MODE button on the remote switch or the ON/OFF button on the navigation system. Muting the microphone Redialling a number 1. During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display. Press the PHONE button on the unit. 2. Select REDIAL. DVD navigation units Receiving an incoming call Press the mute button (symbol of a microphone with a line through it). Press the button once again to turn this function off. Accepting an incoming call Incoming calls can be accepted by pressing either the call accept button, the MODE button on the remote control, the PHONE button on the unit or by using the ACCEPT option in the menu. CD navigation units Press the microphone mute button. Press the button once again to turn this function off. Rejecting an incoming call Incoming calls can be rejected by pressing either the call reject button, the CD or AM/FM buttons on the unit, or by using the REJECT option in the menu. Changing the active phone Receiving a second incoming call Note: After bonding a phone to the system, this becomes the active phone. Note: The second incoming call function must be activated in your phone. 1. Note: Phones must be bonded to the system before they can be made active. Press the PHONE button on the unit. 2. Using the BT SETTINGS option in the menu, select the active phone from the list. If there is an incoming call, whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call. 247 Telephone Debonding a bonded phone A bonded phone can be deleted from the system at any time, unless a phone call is in progress. 1. Press the PHONE button on the unit. 2. Select the BT SETTINGS option in the menu. 3. Select the DEBOND option in the menu. 4. Select the phone from the list. 248 Voice control Do not try to give any commands until the beep tone has been heard. The voice control system will repeat each spoken command back to you. PRINCIPLE OF OPERATION CAUTION Using the system with the engine off will drain the battery. If you are not sure how to continue say "HELP" for assistance or "CANCEL" if you do not wish to continue. Voice recognition enables operation of the system without the need to divert your attention from the road ahead in order to change settings, or receive feedback from the system. The "HELP" function provides only a subset of the available voice commands. Detailed explanations of all possible voice commands can be found on the following pages. Whenever you issue one of the defined commands with the system active, the voice recognition system converts your command into a control signal for the system. Your inputs take the form of dialogues or commands. You are guided through these dialogues by announcements or questions. Voice commands All voice commands should be given using a natural speaking voice, as if speaking to a passenger or on the phone. Your voice level should be dependant on the surrounding noise level inside or outside the vehicle but do not shout. Please familiarise yourself with the functions of the system before using voice recognition. USING VOICE CONTROL Supported commands System operation The voice control system allows you to control the following vehicle functions: The order and content of the voice controls are given in the following lists. The tables show the sequence of user voice commands and system responses for each available function. • Bluetooth phone • radio • CD Player/CD Changer • external device (USB) <> indicates a number or stored name tag to be inserted by the user. • external device (iPod) Short cuts • automatic climate control • navigation system (DVD units only refer to separate DVD navigation handbook). There are a number of voice command short cuts available, which allow you to control some vehicle features without having to follow the complete command menu. These are: System response • As you work through a voice session the system will prompt you with a beep tone each time the system is ready to proceed. • 249 phone: "MOBILE NAME", "DIAL NUMBER", "DIAL NAME", and "REDIAL" CD player/CD changer: "DISC" and "TRACK" Voice control • • • • • Name tag automatic climate control: "TEMPERATURE", "AUTO MODE", "DEFROSTING/DEMISTING ON" and "DEFROSTING/DEMISTING OFF" radio: "TUNE NAME" external device (USB): "TRACK" external device (iPod): "TRACK" SD card: "TRACK". The name tag functionality can support the phone, audio and navigation features by using the "STORE NAME" function. You can assign name tags to items such as favourite radio stations and personal phone contacts. See Audio unit commands (page 250). See Telephone commands (page 261). See Navigation system commands (page 265). Start communicating with the system Before you can start talking to the system you first have to press the VOICE or MODE button for each operation and wait until the system answers with a beep. See (page 249). • Store up to 20 name tags per function. • The average recording time for each name tag is approximately 2-3 seconds. AUDIO UNIT COMMANDS Press the button again to cancel the voice session. CD Player You can control playback directly by voice control. Overview The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. "CD PLAYER" "HELP" "PLAY" * "TRACK" "SHUFFLE ALL" "SHUFFLE FOLDER" ** "SHUFFLE OFF" "REPEAT FOLDER" 250 ** Voice control "CD PLAYER" "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Only available if the CD contains audio data files like MP3 or WMA. Track You can choose a track on your CD directly. Steps User says System answer 1 "CD PLAYER" "CD PLAYER" 2 "TRACK" "TRACK NUMBER PLEASE" 3 "" * ** "TRACK " * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245) Shuffle all To set random playback. Steps User says System answer 1 "CD PLAYER" "CD PLAYER" 2 "SHUFFLE ALL" CD Changer Overview The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. 251 Voice control "CD CHANGER" "HELP" "PLAY" * "DISC" * "TRACK" "SHUFFLE ALL" "SHUFFLE CD" "SHUFFLE FOLDER" ** "SHUFFLE OFF" "REPEAT CD" "REPEAT FOLDER" ** "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Only available if the CD contains audio data files like MP3 or WMA. Disc If you have a CD changer you can choose the disc number. Steps User says System answer 1 "CD CHANGER" "CD CHANGER" 2 "DISC" "DISC NUMBER PLEASE" 3 "" "DISC " * * Can be used as a shortcut. Track You can choose a track on your CD directly. 252 Voice control Steps User says System answer 1 "CD CHANGER" "CD CHANGER" 2 "TRACK" 3 "" "TRACK NUMBER PLEASE" * "TRACK " ** * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245) Shuffle CD To set random playback within the CD contents. Steps User says System answer 1 "CD CHANGER" "CD CHANGER" 2 "SHUFFLE CD" Overview Radio The overview below shows the available voice commands. The following lists will give further information about the complete command menu. The radio voice commands support the functionality of the radio and allow you to tune radio stations by voice control. "RADIO" "HELP" "AM" "FM" "TUNE NAME" * "DELETE NAME" "DELETE DIRECTORY" "PLAY DIRECTORY" "STORE NAME" 253 Voice control "RADIO" "PLAY" * Can be used as a shortcut. Tune frequency This function allows you to tune your radio by voice commands. Steps User says System answer 1 "RADIO" "RADIO" 2 "AM" "AM FREQUENCY PLEASE" "FM" "FM FREQUENCY PLEASE" 3 "TUNE " * "" * The frequency may be entered in a variety of ways. Refer below for representative examples. • • • • • FM band: 87.5 - 108.0 in increments of 0.1 • • • • • "Eighty nine point nine" (89.9) "Ninety" (90.0) "One hundred point five" (100.5) "One zero one point one" (101.1) "One zero eight" (108.0) "Five thirty one" (531) "Nine hundred" (900) "Fourteen forty" (1440) "Fifteen zero three" (1503) "Ten eighty" (1080) Store name AM/MW band: 531 - 1602 in increments of 9 If you have tuned a radio station, you can store it with a name in the directory. AM/LW band: 153 - 281 in increments of 1 Steps User says System answer 1 "RADIO" "RADIO" 2 "STORE NAME" "STORE NAME" "NAME PLEASE" 3 "" "REPEAT NAME PLEASE" 4 "" "STORING NAME" " STORED" 254 Voice control Tune name This function allows you to call up a stored radio station. Steps User says System answer 1 "RADIO" "RADIO" 2 "TUNE NAME" 3 "" "NAME PLEASE" * "TUNE " * Can be used as a shortcut. Delete name This function allows you to delete a stored radio station. Steps User says System answer 1 "RADIO" "RADIO" 2 "DELETE NAME" "NAME PLEASE" 3 "" "DELETE " "CONFIRM YES OR NO" 4 "YES" "DELETED" "NO" "COMMAND CANCELLED" Play directory This function allows you to let the system tell you all of the stored radio stations. Steps User says System answer 1 "RADIO" "RADIO" 2 "PLAY DIRECTORY" "PLAY " Delete directory This function allows you to delete all stored radio stations at once. 255 Voice control Steps User says System answer 1 "RADIO" "RADIO" 2 "DELETE DIRECTORY" "DELETE DIRECTORY" "CONFIRM YES OR NO" 3 "YES" "RADIO DIRECTORY DELETED" "NO" "COMMAND CANCELLED" Play This function switches the audio source to the radio mode. Steps User says System answer 1 "RADIO" "RADIO" 2 "PLAY" Auxiliary input This function allows you to switch the audio source to the attached auxiliary input device. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "LINE IN" "LINE IN" Overview External devices - USB The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. These voice commands support the functionality of an external USB device which may be connected to the audio unit. "EXTERNAL DEVICE", "USB" "HELP" 256 Voice control "EXTERNAL DEVICE", "USB" "PLAY" * "TRACK" ** "PLAYLIST" "FOLDER" ** "SHUFFLE ALL" "SHUFFLE FOLDER" "SHUFFLE PLAYLIST" "SHUFFLE OFF" "REPEAT TRACK" "REPEAT FOLDER" "REPEAT OFF" * Can be used as a shortcut. ** Playlists and folders activated by voice control must be assigned special filenames. See General information (page 268). USB play This function allows you to switch the audio source to the attached USB device. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "USB" "USB" 3 "PLAY" USB Track You can choose a track on your USB device directly. 257 Voice control Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "USB" "USB" 3 "TRACK" 4 "TRACK NUMBER PLEASE" "" * "TRACK " * Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245) Overview External devices - iPod The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. These voice commands support the functionality of an iPod which may be connected to the audio unit. "EXTERNAL DEVICE", "IPOD" "HELP" "PLAY" * "TRACK" ** "PLAYLIST" "SHUFFLE ALL" "SHUFFLE PLAYLIST" "SHUFFLE OFF" "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Playlists activated by voice control must be assigned special filenames. See General information (page 268). 258 Voice control iPod Track You can choose a track off the all titles list of your iPod directly. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "IPOD" "IPOD" 3 "TRACK" 4 "" "TRACK NUMBER PLEASE" * "TRACK " ** * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to five single digits (for example "5", "2", "4", "5", "3" for track 52453), to a limit of 65535. iPod playlist You can choose a playlist from your iPod directly. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "IPOD" "IPOD" 3 "PLAYLIST" "PLAYLIST NUMBER PLEASE" 4 "" "PLAYLIST " * * Playlists activated by voice control must be assigned special filenames. See General information (page 268). Overview SD Card The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. These voice commands support the functionality of an SD card which has suitable audio files written to it. "SD CARD" "HELP" 259 Voice control "SD CARD" "PLAY" * "TRACK" "SHUFFLE ALL" "SHUFFLE FOLDER" "SHUFFLE OFF" "REPEAT TRACK" "REPEAT FOLDER" "REPEAT OFF" * Can be used as a shortcut. SD card play This function allows you to switch the audio source to the SD card audio files. Steps User says System answer 1 "SD CARD" "SD CARD" 2 "PLAY" SD card track You can choose a track on your SD card directly. Steps User says System answer 1 "SD CARD" "SD CARD" 2 "TRACK" 3 "" "TRACK NUMBER PLEASE" * ** "TRACK " * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245). 260 Voice control Overview TELEPHONE COMMANDS The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. Phone Your phone system allows you to create an additional phonebook. The stored entries can be dialled by voice control. Phone numbers stored by using voice control are stored on the vehicle system and not in your phone. "PHONE" "HELP" * "MOBILE NAME" * "DIAL NUMBER" * "DIAL NAME" "DELETE NAME" "DELETE DIRECTORY" "PLAY DIRECTORY" "STORE NAME" * "REDIAL" "ACCEPT CALLS" "REJECT CALLS" * Can be used as a shortcut. Phone functions Dial number Phone numbers can be dialled after giving the name tag voice command. Steps User says System answer 1 "PHONE" "PHONE" 261 Voice control Steps User says System answer 2 "DIAL NUMBER" "NUMBER PLEASE" 3 "" " CONTINUE?" 4 "DIAL" "DIALLING" "CORRECTION" " CONTINUE?" * * Can be used as a shortcut. Dial name Phone numbers can be dialled after giving the name tag voice command. Steps User says System answer 1 "PHONE" "PHONE" 2 "DIAL NAME" "NAME PLEASE" 3 "" "DIAL " "CONFIRM YES OR NO" 4 "YES" "DIALLING" "NO" "COMMAND CANCELLED" * * Can be used as a shortcut. Redial This function allows you to redial the last dialled phone number. Steps User says System answer 1 "PHONE" "PHONE" 2 "REDIAL" "REDIAL" "CONFIRM YES OR NO" 3 "YES" "DIALLING" * 262 Voice control Steps User says System answer "NO" "COMMAND CANCELLED" * Can be used as a shortcut. Mobile name This function allows you to access phone numbers stored with a name tag in your mobile phone. Steps User says System answer 1 "PHONE" "PHONE" 2 "MOBILE NAME" "MOBILE NAME" "" * * Can be used as a shortcut. Note: DTMF can only be used during an ongoing call. Press the VOICE button and wait for the system prompt. DTMF (Tone dialling) This function transfers spoken numbers into DTMF tones. For example, to make a remote enquiry to your home answering machine or to enter a PIN number etc. Steps Can only be used with vehicles installed with a dedicated VOICE button. User says System answer 1 2 "NUMBER PLEASE" "" Create a phonebook Store name New entries can be stored with the "STORE NAME" command. This feature can be used to dial a number by calling up the name instead of the full phone number. Steps User says System answer 1 "PHONE" "PHONE" 263 Voice control Steps User says System answer 2 "STORE NAME" "STORE NAME" "NAME PLEASE" 3 "" "REPEAT NAME PLEASE" 4 "" "STORING NAME" " STORED" "NUMBER PLEASE" 5 "" "" 6 "STORE" "STORING NUMBER" "" "NUMBER STORED" Delete name Stored names can also be deleted from the directory. Steps User says System answer 1 "PHONE" "PHONE" 2 "DELETE NAME" "NAME PLEASE" 3 "" "DELETE " "CONFIRM YES OR NO" 4 "YES" " DELETED" "NO" "COMMAND CANCELLED" Play directory Use this function to let the system tell you all stored entries. Steps User says System answer 1 "PHONE" "PHONE" 2 "PLAY DIRECTORY" "PLAY DIRECTORY" 264 Voice control Delete directory Steps This function allows you to delete all entries in one go. User says System answer 1 "PHONE" "PHONE" 2 "DELETE DIRECTORY" "DELETE DIRECTORY" "CONFIRM YES OR NO" 3 "YES" "DIRECTORY DELETED" "NO" "COMMAND CANCELLED" Main settings Reject calls Calls can be set to be automatically rejected using voice control. Steps User says System answer 1 "PHONE" "PHONE" 2 "REJECT CALLS" "REJECT CALLS" "ACCEPT CALLS" * "ACCEPT CALLS" * use this command to turn the reject mode off CLIMATE CONTROL COMMANDS NAVIGATION SYSTEM COMMANDS Climate Please refer to your separate Navigation handbook for details of the command menus. The climate voice commands supports the functionality of the fan speed, temperature and mode settings. Not all functions are available on all vehicles. 265 Voice control Overview The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. "CLIMATE" "HELP" * "FAN" * "DEFROSTING/DEMISTING ON" * "DEFROSTING/DEMISTING OFF" "TEMPERATURE" "AUTO MODE" * * * Can be used as a shortcut. On vehicles fitted with an English language module the "FAN" shortcut is not available. Fan This function allows you to adjust the fan speed. Steps User says System answer 1 "CLIMATE" "CLIMATE" 2 3 * "‘FAN" "FAN SPEED PLEASE" "MINIMUM" "FAN MINIMUM" "" "FAN " "MAXIMUM" "FAN MAXIMUM" * Can be used as a shortcut. On vehicles fitted with an English language module the "FAN" shortcut is not available. 266 Voice control Defrosting/Demisting Steps User says System answer 1 "CLIMATE" "CLIMATE" "DEFROSTING ON/DEMISTING * ON" "DEFROSTING ON/DEMISTING ON" 2 "DEFROSTING OFF/DEMISTING * OFF" "DEFROSTING OFF/DEMISTING OFF" * Can be used as a shortcut. Temperature This function allows you to adjust the temperature. Steps User says System answer 1 "CLIMATE" "CLIMATE" 2 "TEMPERATURE" "TEMPERATURE PLEASE" "MINIMUM" "TEMPERATURE MINIMUM" "" or "" "TEMPERATURE " "MAXIMUM" "TEMPERATURE MAXIMUM" 3 * * Can be used as a shortcut. Auto mode Steps User says System answer 1 "CLIMATE" "CLIMATE" 2 "AUTO MODE" * "AUTO MODE" * Can be used as a shortcut. Can be deactivated by selecting a different temperature or fan speed. 267 Connectivity The system supports a range of external devices, to fully integrate with your audio unit via the USB and auxiliary input sockets. Once connected, control of the external device is possible via the audio unit. GENERAL INFORMATION CAUTIONS Take care when handling external devices with exposed electrical connectors (such as the USB plug). Always replace the protective cap/shield when possible. There may be a risk of electrostatic discharge causing damage to the device. A list of typical compatible devices are shown below: • USB memory sticks • USB portable hard drives • MP3 players with USB connection • iPod media players (refer to www.ford-mobile -connectivity.com for latest compatibility list). Do not touch or handle the USB socket in the vehicle. Cover the socket when not in use. Only use USB Mass-Storage device compliant devices. Always switch your audio unit to a different source (for example the radio) before unplugging the USB device. The system is USB 2.0 full speed compatible, USB 1.1 host compliant and supports FAT 16/32 file systems. Information on audio file structures for external devices Do not install or connect USB hubs or splitters. USB Note: The system is only designed to recognize and read suitable audio files from a USB device that conforms to the USB Mass-Storage device class or an iPod. Not all available USB devices can be guaranteed to function with the system. Create only a single partition on the USB device. If playlists are created, they must contain correct file paths referenced to the USB device. It is recommended to create the playlist after the audio files have been transferred to the USB device. Note: It is possible to connect compatible devices with a trailing USB lead as well as those that plug into the vehicle USB socket directly (for example USB memory sticks and pen drives). Playlists must be created in .m3u format. Audio files must be in .mp3 format. Do not exceed the following limits: • 1000 items per folder (files, folders and playlists) • 5000 folders per USB device (including playlists) • 8 subfolder levels. Note: Some USB devices with a higher power consumption may not be compatible (for example some larger hard drives). Note: Access time to read the files on the external device will vary depending upon factors such as the file structure, size and device content. 268 Connectivity Connection To enable voice control for custom playlists and folders, follow the procedure below: • Create folders named with the structure "Ford<*>" where <*> is a number 1-10. For example "Ford3" without an extension. • Create playlists named with the structure "Ford<*>.m3u" where <*> is a number 1-10. For example "Ford5.m3u" without any space between "Ford" and the number. Plug in the device, and if necessary secure it to prevent movement within the vehicle. Connecting an iPod For optimum convenience and audio quality, we recommend that you purchase a dedicated single connection lead available from your dealer. Alternatively, it is possible to connect your iPod using the standard iPod USB cable and a separate 3.5mm audio jack lead. If using this method preset the iPod volume to maximum and turn off any equalizer settings before making the connections: Thereafter, custom folders and playlists will be selectable with voice control. See Audio unit commands (page 250). iPod • To enable voice control for custom playlists, create playlists named with the structure "Ford<*>" where <*> is a number 1-10. For example "Ford7" without any space between "Ford" and the number. • Connect the headphone output of the iPod to the AUX IN socket. Connect the USB cable from the iPod to the vehicle USB socket. CONNECTINGANEXTERNAL DEVICE - VEHICLES WITH: BLUETOOTH Thereafter, playlists will be selectable with voice control. See Audio unit commands (page 250). Connecting a Bluetooth audio device CONNECTINGANEXTERNAL DEVICE CAUTION As various standards exist, manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the Bluetooth device and the system, which in some cases may limit system functionality. To avoid this situation, only recommended devices should be used. WARNING Make sure the external device is securely mounted within the vehicle, and that trailing connections do not obstruct any of the driving controls. External devices may be connected using the auxiliary input socket and the USB port. See Auxiliary input (AUX IN) socket (page 135). See USB port (page 136). Please visit the website www.ford-mobile-connectivity.com for full details. 269 Connectivity Bonding the device Information not available Note: Some audio and navigation units have a separate Bluetooth audio menu. Use this to access setup and control. E100028 Sony radio To connect the device to the system follow the same procedure as for Bluetooth hands free phones. See Bluetooth setup (page 242). Operation Select the USB device as the audio source by repeatedly pressing the CD/AUX button until USB appears in the display. After first connecting the USB device, the first track within the first folder will start to play automatically. Subsequently, following audio source switching, the position of playback on the USB device is remembered. Operating the device Select Bluetooth audio as the active source. Tracks can be accessed by skipping forwards and backwards using the steering wheel controls, or directly from the audio unit controls. To browse the device contents, press the up/down arrow key or the OK button once. USING A USB DEVICE The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the folder view. • ">" after an entry indicates a further level down is readable (for example a folder named after an album, with individual album tracks within that folder). • "<" before the list indicates that a further level up is readable. • Icons to the left of track/folder text indicate the type of file/folder. Refer to the list for an explanation of these icons. Various icons are used to identify types of audio file, folders etc. USB device is the active source E100029 Folder E100022 Playlist E100023 Album E100024 Artist To navigate the USB device contents, use the up/down arrow keys to scroll through lists, and the left/right keys to move up or down within the folder hierarchy. Once your desired track, playlist or folder is highlighted, press the OK button to select playback. E100025 Filename E100026 Track title E100027 270 Connectivity Note: If you wish to jump to the top level of the USB device contents, press and hold the left arrow key. To browse the device contents, press the SELECT button once. The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the folder view. • ">" after an entry indicates a further level down is readable (for example a folder named after an album, with individual album tracks within that folder). • "<" to the left hand side of the display indicates that a further level up is readable. • Icons to the left of track/folder text indicate the type of file/folder. Refer to the list for an explanation of these icons. Audio control Press the left and right arrow keys to skip backwards and forwards through tracks. Press and hold the left/right arrow keys to enable fast rewind/fast forward through track content. Press the up/down arrow key or the OK button to browse the device contents. Press the MENU key to enter the USB menu. It is possible to enable shuffle and repeat functions here with respect to folders and playlists. Press the SCAN button to scan the whole device, current folder or a playlist if it is in operation. Press the INFO button to display the following: • filename • title • artist • album • track number and playing time. To navigate the USB device contents, use the rotary scroll/select button to browse through lists. Push the button to expand the contents within the highlighted playlist or folder, or to commence playback of a particular track. Press ESC to go up one level. Audio control Repeated button presses will scroll through these displays. Press the SEEK up and down keys to skip backwards and forwards through tracks. CD Navigation units Press and hold the SEEK keys to enable fast rewind/fast forward through track content. Operation Select the USB device as the audio source by pressing the CD/AUX button until DEVICES appears in the display. Select DEVICES and then select USB from the available device list. After first connecting the USB device, the first track within the first folder will start to play automatically. Subsequently, following audio source switching, the position of playback on the USB device is remembered. Rotate or press the SELECT button to browse the device contents. Press SHUFFLE or REPEAT buttons to enable shuffle and repeat functions with respect to folders and playlists. Different options may appear depending upon whether or not a playlist is in operation. 271 Connectivity Press the SCAN button to scan the current playlist if it is in operation, or the complete USB device or folder. • Press the INFO button to display the following: • filename • title • artist • album • track number and playing time. • "<" to the left hand side of the display indicates that a further level up is readable. Icons to the left of track/folder text indicate the type of file/folder. Refer to the list for an explanation of these icons. To navigate the USB device contents, use the scroll buttons to browse through lists. Push the button to expand the contents within the highlighted playlist or folder, or to commence playback of a particular track. Press the left arrow key to go up one level. DVD Navigation units Operation Audio control Select the USB device as the audio source by pressing the CD/AUX button until the USB button appears to the left of the display. Select USB from the available device list. Press the SEEK up and down keys to skip backwards and forwards through tracks. Press and hold the SEEK keys to enable fast rewind/fast forward through track content. Note: Some devices may be shown but not selectable, depending if the device is connected or not. Press the scroll bar arrow keys to browse the device contents. After first connecting the USB device, the first track within the first folder will start to play automatically. Subsequently, following audio source switching, the position of playback on the USB device is remembered. Press SHUFFLE or REPEAT buttons to enable shuffle and repeat functions with respect to folders and playlists. Press the SCAN button to scan the current playlist if it is in operation, or the complete USB device or folder. To browse the device contents, press the scroll up or down arrow button. Press the INFO button to display the following: • filename • title • artist • album • track number and playing time. The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the folder view. • ">" after an entry indicates a further level down is readable (for example a folder named after an album, with individual album tracks within that folder). USING AN IPOD Various icons are used to identify types of audio file, folders etc. 272 Connectivity iPod is the active source The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the list view. • ">" after an entry indicates a further level down is readable (for example all albums by a particular artist). • "<" before the list indicates that a further level up is readable. • An icon on the left side indicates the type of the currently displayed list (for example list of albums). Refer to the list for an explanation of these icons. E100030 iPod playlist E100031 iPod artist E100032 iPod album E100033 iPod genre E100034 iPod song To navigate the iPod contents, use the up/down arrow keys to scroll through lists, and the left/right keys to move up or down within the hierarchy. Once your desired track, playlist, album, artist or genre is highlighted, press the OK button to select playback. E100035 iPod generic category E100036 iPod generic media file Sony radio Note: If you wish to jump to the top level of the iPod contents, press and hold the left arrow key. Operation Audio control Select the iPod as the audio source by repeatedly pressing the CD/AUX button until iPod appears in the display. Press the left and right arrow keys to skip backwards and forwards through tracks. E100037 Press and hold the left/right arrow keys to enable fast rewind/fast forward through track content. The iPod menu list for browsing contents will be available through the radio display. Navigation of the contents follows the same principles as for iPod standalone use (for example search by artist, title, etc.). To browse the iPod contents, press the up/down arrow key or the OK button once. Press the up/down arrow key or the OK button to browse the iPod contents. Press the MENU key to enter the iPod menu. It is possible to enable shuffle and repeat functions here. It is also possible to enable the iPod "Shuffle songs" option directly from the top level. Press the SCAN button to scan the currently selected tracks. 273 Connectivity Press the INFO button to display the following: • title • artist • track number and playing time. To navigate the iPod contents, use the rotary scroll/select button to browse through lists. Push the button to expand the contents within the highlighted playlist, album, artist, genre or to commence playback of a particular track. Press ESC to go up one level. Repeated button presses will scroll through these displays. Audio control CD Navigation units Press the SEEK up and down keys to skip backwards and forwards through tracks. Operation Select the iPod as the audio source by pressing the CD/AUX button until DEVICES appears in the display. Select DEVICES and then select iPod from the available device list. Press and hold the SEEK keys to enable fast rewind/fast forward through track content. Rotate or press the SELECT button to browse the iPod contents. The iPod menu list for browsing contents will be available through the display. Navigation of the contents follows the same principles as for iPod standalone use (for example search by artist, title, etc.). To browse the iPod contents, press the SELECT button once. Press the MENU key to enter the iPod menu. It is possible to enable shuffle and repeat functions here. It is also possible to enable the iPod "Shuffle songs" option directly from the top level. Press the SCAN button to scan the currently selected tracks. The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the list view. • ">" after an entry indicates a further level down is readable (for example all albums by a particular artist). • "<" before the list indicates that a further level up is readable. • An icon on the left side indicates the type of the currently displayed list (for example list of albums). Refer to the list for an explanation of these icons. Press the INFO button to display the following: • title • artist • track number and playing time. DVD Navigation units Operation Select the iPod as the audio source by pressing the CD/AUX button until the iPod button appears to the left of the display. Select iPod from the available device list. Note: Some devices may be shown but not selectable, depending if the device is connected or not. 274 Connectivity The iPod menu list for browsing contents will be available through the display. Navigation of the contents follows the same principles as for iPod standalone use (for example search by artist, title, etc.). To browse the iPod contents, press the scroll up or down arrow button. Press the SCAN button to scan the currently selected tracks. Press the INFO button to display the following: • title • artist • track number and playing time. The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the list view. • ">" after an entry indicates a further level down is readable (for example all albums by a particular artist). • "<" before the list indicates that a further level up is readable. • An icon on the left side indicates the type of the currently displayed list (for example list of albums). Refer to the list for an explanation of these icons. To navigate the iPod contents, use the scroll buttons to browse through lists. Push the button to expand the contents within the highlighted playlist, album, artist, genre or to commence playback of a particular track. Press the left arrow key to go up one level. Audio control Press the SEEK up and down keys to skip backwards and forwards through tracks. Press and hold the SEEK keys to enable fast rewind/fast forward through track content. Press the scroll bar arrow keys to browse the iPod contents. Press the MENU key to enter the iPod menu. It is possible to enable shuffle and repeat functions here. It is also possible to enable the iPod "Shuffle songs" option directly from the top level. 275 Navigation introduction ROAD SAFETY WARNINGS The system provides you with information designed to help you reach your destination quickly and safely. For reasons of safety, the driver should only program the system when the vehicle is stationary. The system provides no assistance with respect to stop signs, traffic lights, areas under construction or other important safety information. Do not use the system until you have familiarised yourself with its operation. Only view the system display when driving conditions permit. Safety information Read and follow all stated safety precautions. Failure to do so may increase your risk of collision and personal injury. Ford Motor Company shall not be liable for any damages of any type arising from failure to follow these guidelines. If detailed viewing of route instructions is necessary, pull off the road when it is safe to do so and park your vehicle. Do not use the navigation system to locate emergency services. To use the system as effectively and safely as possible, always use the latest navigation information. Your dealer will be able to assist with this. 276 Navigation system Installing the micro SD card GETTING STARTED CAUTION Using the system with the engine off will drain the battery. 1 Note: You will be charged when sending and receiving text messages. Note: Refer to your phone handbook for all phone functions and operation. 2 Note: Keep the activation code (printed on the installation guide) in a safe place. Note: Retain the activation text message in your mobile phone inbox. E114212 Compatibility of phones 1. Remove the micro SD card from the adaptor. 2. Insert the micro SD card into the mobile phone. CAUTION As no common agreement exists, mobile phone manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the phone and hands-free system, which in some cases may significantly degrade the system performance. To avoid this situation, only recommended phones should be used. Activating the mobile phone navigation system Note: The radio must be switched on before connecting the mobile phone to the in-car GPS receiver. Note: The Ford Mobile Navigation must be installed and activated on your mobile phone. Please visit the website www.ford-mobile-connectivity.com for full details. Note: It is possible to activate up to a maximum of three phones. Note: Detailed instructions are available on the micro SD card and at www.ford-mobile-connectivity.com. 1. 277 Switch the radio on. Navigation system E114213 2. Switch your mobile phone on and start the "Ford Mobile Navigation". 3. Choose "Select Destination". 4. Choose "Enter Address". 5. Change route options if necessary and start the route guidance. 6. The vehicle display will show the turn information. Voice instructions are heard via the vehicle speakers. Note: Your mobile phone will display your current position. 7. You are able to exit the application and continue your route guidance after restarting the application. 278 Appendices www.novero.com/declaration_of_conformity TYPE APPROVALS The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ford Motor Company is under license. Other trademarks and trade names are those of their respective owners. FCC/INDUSTRY CANADA NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TYPE APPROVALS iPod is a trademark of Apple Inc. FCC ID: WJLRX-42 TYPE APPROVALS IC: 7847A-RX42 Changes or modifications to your device not expressly approved by the party responsible for compliance can void the user's authority to operate the equipment. E114214 RX-42 - declaration of conformity © 2008 NAVTEQ B.V. All rights reserved. We, the party responsible for compliance, declare under our sole responsibility that the Handset Integration product RX-42 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at: 279 Appendices E114220 WARNINGS ELECTROMAGNETIC COMPATIBILITY Radio frequency (RF) transmitter equipment (e.g. cellular telephones, amateur radio transmitters etc.) may only be fitted to your vehicle if they comply with the parameters shown in the table below. There are no special provisions or conditions for installations or use. WARNINGS Your vehicle has been tested and certified to European legislations relating to electromagnetic compatibility (2004/104/EC). It is your responsibility to ensure that any equipment you have fitted complies with applicable local legislations. Have any equipment fitted by properly trained technicians. Do not mount any transceiver, microphones, speakers, or any other item in the deployment path of the airbag system. Do not fasten antenna cables to original vehicle wiring, fuel pipes and brake pipes. 280 Appendices WARNINGS Keep antenna and power cables at least 100mm from any electronic WARNINGS modules and airbags. 6 4 1 2 3 8 5 7 E85998 Frequency Band MHz Maximum output power Watt (Peak RMS) Antenna Positions 1 – 30 50 W 3, 8 30 – 54 50 W 2, 3 68 – 87.5 50 W 1, 2, 3, 4, 5 142 – 176 50 W 1, 2, 3, 4, 5 380 – 512 50 W 1, 2, 3, 4, 5 806 – 940 10 W (2 W ) 1, 2, 3, 4, 5 (6 , 7 ) 1200 – 1400 10 W 2 1710 – 1885 10 W (1 W ) 1885 – 2025 2400 – 2500 1 1 1 1 1 1 1 1 1, 2, 3, 4, 5 (6 , 7 ) 10 W (1 W ) 1 1, 2, 3, 4, 5 (6 , 7 ) 0.1 W All positions 1 Only for GSM/3G cellular phones, with a patch antenna installed inside of the front windscreen. 281 Appendices Note: After the installation of RF transmitters, check for disturbances from and to all electrical equipment in the vehicle, both in the standby and transmit modes. Check all electrical equipment: • with the ignition ON • with the engine running • during a road test at various speeds. Check that electromagnetic fields generated inside the vehicle cabin by the transmitter installed do not exceed human exposure limits specified in EU directive 2004/40/EC. 282 Index A Ashtray....................................................129 Front ashtray...............................................129 Rear ashtray................................................129 A/C See: Climate control...................................104 Audible warnings and indicators...........81 About this handbook................................7 ABS Audio control...........................................45 Switching the chimes on and off................81 Mode..............................................................45 Seek...............................................................46 See: Brakes.................................................149 ABS driving hints Audio unit commands.........................250 See: Hints on driving with ABS.................149 Auxiliary input..............................................256 CD Changer.................................................251 CD Player....................................................250 External devices - iPod.............................258 External devices - USB.............................256 Radio............................................................253 SD Card.......................................................259 ACC See: Adaptive cruise control (ACC).........162 Accessories See: Parts and accessories..........................7 See: Using ACC..........................................163 Active suspension.................................157 Principle of operation.................................157 Auto-dimming mirror..............................75 Autolamps................................................53 Automatic climate control....................108 Active suspension See: Using active suspension...................157 Adaptive cruise control (ACC).............162 Air distribution...............................................110 Blower...........................................................110 Mono mode.................................................109 Rear air conditioning (triple-zone automatic climate control).........................................111 Recirculated air............................................110 Setting the temperature............................109 Switching the air conditioning on and off...............................................................110 Switching the automatic climate control on and off..................................................111 Windscreen defrosting and demisting..................................................110 Principle of operation.................................162 Adaptive cruise control See: Using ACC..........................................163 Adaptive front lighting system (AFS).......................................................55 Cornering lamps...........................................56 Adjusting the headlamps - Vehicles With: Adaptive Front Lighting/Xenon Headlamps............................................54 Adjusting the steering wheel.................45 Adjusting the windscreen washer jets...........................................................48 AFS Automatic transmission........................146 See: Adaptive front lighting system (AFS)...........................................................55 Drive modes................................................147 Emergency park position release lever..........................................................148 Hints on driving with an automatic transmission............................................147 Selector lever positions.............................146 Air conditioning See: Climate control...................................104 Air vents..................................................104 Front air vents.............................................104 Second row air vents.................................105 Third row air vents......................................105 Autowipers...............................................47 Alarm.........................................................42 Principle of operation...................................42 Appendices............................................279 Arming the alarm.....................................44 All vehicles.....................................................44 Arming the engine immobiliser..............41 283 Index Auxiliary heater.......................................113 CD changer............................................135 Changing a bulb......................................59 Changing the remote control battery......117 Diesel auxiliary heater (depending on country).....................................................115 Feedback during starting and switching off...............................................................116 Fuel operated heater (depending on country).....................................................115 Parking heater..............................................113 Programming the transmitter....................117 Remote start in combination with direct start or timer.............................................116 Remote starting...........................................116 Approach lamp..............................................61 Central high mounted brake lamp (Galaxy)......................................................67 Central high mounted brake lamp (S-MAX).....................................................66 Front fog lamp and side lamp (Galaxy)......................................................62 Front fog lamp and side lamp (S-MAX)......................................................61 Headlamp......................................................59 Interior lamps.................................................67 Luggage compartment lamp.....................69 Number plate lamp......................................67 Reading lamps..............................................68 Rear lamp (Galaxy)......................................64 Rear lamp (S-MAX)......................................63 Side repeater................................................60 Vanity mirror lamp........................................69 Auxiliary input (AUX IN) socket............135 Auxiliary power sockets.......................129 Galaxy...........................................................130 S-Max...........................................................130 B Battery connection points...................221 Bluetooth setup....................................242 Changing a fuse....................................193 Changing a road wheel.......................222 Handling of phones...................................242 Requirements for Bluetooth connection..............................................242 Installing a road wheel...............................224 Jacking and lifting points..........................222 Locking wheel nuts...................................222 Removing a road wheel............................223 Vehicle jack.................................................222 Bonnet lock See: Opening and closing the bonnet....206 Booster cables Changing the remote control battery....................................................33 See: Using booster cables.......................220 Booster cushions.....................................21 Remote control with a folding key blade..........................................................33 Remote control without a folding key blade..........................................................34 Booster cushion (Group 3).........................22 Booster seat (Group 2)................................21 Brake and clutch fluid check...............215 Brakes.....................................................149 Changing the wiper blades...................49 Principle of operation.................................149 Rear window wiper blades.........................50 Windscreen wiper blades...........................49 Bulb changing Checking the wiper blades...................49 Childminder mirror.................................135 Child safety..............................................20 Child safety locks....................................26 See: Changing a bulb..................................59 Bulb specification chart..........................69 C Cargo nets..............................................173 Left-hand side...............................................26 Right-hand side............................................26 Luggage retention net - type 1.................173 Luggage retention net - type 2................175 Child seat positioning.............................22 Child seats................................................20 Car wash See: Cleaning the exterior.........................218 Child restraints for different mass groups........................................................20 Catalytic converter................................142 Cigar lighter............................................129 Driving with a catalytic converter.............142 284 Index Cleaning the exterior............................218 Disabling the passenger airbag.............31 Body paintwork preservation...................218 Cleaning the chrome trim.........................218 Cleaning the headlamps...........................218 Cleaning the rear window.........................218 Disabling the passenger airbag.................32 Enabling the passenger airbag..................32 Fitting the passenger airbag deactivation switch..........................................................31 Cleaning the interior..............................218 Disarming the alarm................................44 Instrument cluster screens, LCD screens, radio screens..........................................219 Seat belts.....................................................218 Category one alarm.....................................44 Perimeter alarm............................................44 Disarming the engine immobiliser.........41 Dog guard...............................................180 Climate control.......................................104 Principle of operation.................................104 Installing the dog guard..............................181 Climate control commands................265 DPF Climate.........................................................265 See: Diesel particulate filter (DPF)............140 Clock.......................................................128 Coded keys..............................................41 Cold weather precautions...................190 Connecting an external device..........269 Driving hints............................................190 Driving through water...........................190 Driving through water ...............................190 E Connection.................................................269 Connecting an external device Vehicles With: Bluetooth...................269 Electric exterior mirrors..........................73 Connecting a Bluetooth audio device......................................................269 Connectivity...........................................268 Electric folding mirrors.................................74 Mirror tilting positions...................................73 Reverse mirror dipping................................74 General information...................................268 Electric parking brake (EPB)................150 Convenience features..........................128 Coolant check Applying the EPB........................................150 Applying the EPB when the vehicle is moving......................................................151 Automatic application of the EPB............150 Cut in the power supply............................152 Parking on a hill...........................................150 Preventing automatic application of the EPB............................................................151 Releasing the EPB.......................................151 See: Engine coolant check.......................214 Cruise control.........................................160 Principle of operation.................................160 Cruise control See: Using cruise control..........................160 Cup holders............................................130 Seat back trays...........................................130 Electric seats...........................................119 D 2-way electric seat......................................119 8-way electric seat.....................................120 Detachable tow ball..............................183 Electric windows......................................71 Driving with a trailer....................................185 Driving without a trailer...............................186 Inserting the tow ball arm..........................184 Maintenance...............................................186 Removing the tow ball arm.......................185 Unlocking the tow ball arm mechanism..............................................184 Anti-trap function..........................................72 Driver’s door switches..................................71 Front and rear passengers’ door switches.....................................................71 Global opening and global closing.............71 Opening and closing the windows automatically..............................................71 Resetting the memory of the electric windows....................................................72 Safety mode..................................................73 Safety switch for rear windows..................72 Diesel particulate filter (DPF)................140 Regeneration...............................................140 Direction indicators.................................57 285 Index Electromagnetic compatibility............280 Emergency equipment.........................191 Engine compartment overview - 1.8L Duratorq-TDCi (Lynx) Diesel.............210 Engine compartment overview - 2.0L Duratec-HE (MI4)...............................207 Engine compartment overview - 2.0L Duratorq-TDCi (DW) Diesel................211 Engine compartment overview - 2.2L Duratorq-TDCi (DW) Diesel...............212 Engine compartment overview - 2.3L Duratec-HE (MI4)...............................208 Engine compartment overview - 2.5L Duratec (VI5).......................................209 Engine coolant check...........................214 Front seat armrest.................................127 Fuel and refuelling..................................141 Checking the coolant level........................214 Topping up...................................................214 Central fuse box.........................................192 Engine compartment fuse box................192 Rear fuse box..............................................193 Technical specifications.............................143 Fuel burning heater See: Auxiliary heater....................................113 Fuel consumption..................................143 Fuel consumption See: Technical specifications....................143 Fuel filler flap...........................................142 Fuel quality - Diesel................................141 Long-term storage.....................................142 Fuel quality - E85....................................141 Long-term storage......................................141 Fuel quality - Petrol.................................141 Fuse box locations................................192 Engine heater.........................................140 Engine immobiliser..................................41 Fuses.......................................................192 Fuse specification chart.......................194 Principle of operation....................................41 Engine oil check.....................................214 Central fuse box..........................................197 Engine compartment fuse box................194 Rear fuse box.............................................200 Checking the oil level.................................214 Topping up...................................................214 Engine oil dipstick - 1.8L Duratorq-TDCi (Lynx) Diesel.........................................213 Engine oil dipstick - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4)............213 Engine oil dipstick - 2.0L Duratorq-TDCi (DW) Diesel/2.2L Duratorq-TDCi (DW) Diesel....................................................213 Engine oil dipstick - 2.5L Duratec (VI5).......................................................213 EPB G Gauges......................................................77 Engine coolant temperature gauge..........78 Fuel gauge.....................................................79 Gearbox See: Transmission.......................................146 General information on radio frequencies............................................33 Getting started......................................277 See: Electric parking brake (EPB)............150 Exterior mirrors........................................73 Activating the mobile phone navigation system.....................................................277 Compatibility of phones............................277 Installing the micro SD card......................277 Manual folding mirrors.................................73 F Glasses holder.......................................134 Global opening and closing...................39 Fastening the seat belts........................29 Second row centre seat belt.....................30 Global closing................................................40 Global opening.............................................39 First aid kit................................................191 Fog lamp Glove box...............................................130 See: Front fog lamps...................................53 Cooled glove box.......................................130 Forward alert function..........................166 Adjusting the warning sensitivity..............167 Switching forward alert on/off..................167 Front fog lamps.......................................53 286 Index H Information messages...........................95 Active suspension........................................96 Alarm..............................................................96 Battery and charging system.....................97 Climate control..............................................97 Cruise control and Adaptive cruise control (ACC)..........................................................97 Doors open...................................................98 Electric parking brake (EPB).....................100 Engine immobiliser.......................................98 Hill launch assist (HLA).................................98 Lighting...........................................................99 Maintenance.................................................99 Message indicator.......................................95 Message symbols........................................95 Occupant protection..................................100 Parking brake..............................................100 Power steering............................................101 Stability control (ESP)..................................101 Transmission................................................101 Tyre pressure monitoring system.............101 Viewing current messages.........................95 Voice control................................................103 Handbrake See: Parking brake.....................................149 Hazard warning flashers........................55 Headlamp adjustment See: Adjusting the headlamps - Vehicles With: Adaptive Front Lighting/Xenon Headlamps................................................54 Headlamp levelling..................................54 Recommended headlamp levelling switch positions....................................................54 Headlamp washers................................49 Head restraints.......................................121 Adjusting the head restraint.......................121 Removing the head restraint.....................121 Heated seats..........................................126 Heated windows and mirrors...............112 Heated exterior mirrors..............................113 Heated windows.........................................112 Heating See: Climate control...................................104 Hill launch assist Instrument lighting dimmer..................128 Instruments..............................................77 Interior lamps...........................................57 See: Using hill start assist..........................154 Hill start assist.........................................154 Principle of operation.................................154 Courtesy lamp..............................................57 Reading lamps..............................................57 Vanity mirror lamps......................................58 Hints on driving with ABS.....................149 HLA See: Hill start assist.....................................154 See: Using hill start assist..........................154 Introduction................................................7 ISOFIX anchor points..............................25 I Attaching a child seat with top tethers........................................................25 Top tether anchor points............................25 Ignition switch.........................................137 Immobiliser J See: Engine immobiliser...............................41 Information displays................................82 Jump starting General information.....................................82 See: Using booster cables.......................220 K Keys and remote controls.....................33 287 Index L Manual climate control.........................105 Air conditioning............................................106 Air distribution control................................105 Blower..........................................................106 Heating the interior quickly........................106 Recirculated air...........................................106 Ventilation.....................................................106 Lighting control........................................52 Headlamp flasher.........................................52 Home safe lighting.......................................53 Lighting control positions............................52 Main and dipped beam...............................52 Parking lamps...............................................52 Manual seats...........................................118 Adjusting the angle of the seatback........119 Adjusting the height of the driver’s seat............................................................119 Adjusting the lumbar support....................119 Moving the seats backwards and forwards....................................................118 Lighting.....................................................52 Load carriers See: Roof racks and load carriers............176 Load carrying.........................................168 General information....................................168 Load retaining fixtures...........................177 Installing the load bracket..........................179 Installing the load retaining fixtures..........177 Installing the luggage anchor points........179 Manual transmission.............................146 Locking and unlocking...........................37 Map pockets..........................................133 Memory function...................................134 All vehicles....................................................146 Selecting reverse gear...............................146 Automatic relocking.....................................39 Central locking..............................................37 Double locking..............................................37 Double locking the doors with the key..............................................................37 Locking and unlocking confirmation.........37 Locking and unlocking the doors and the luggage compartment lid with the remote control..........................................38 Locking and unlocking the doors from inside..........................................................38 Locking and unlocking the doors with the key..............................................................37 Luggage compartment lid..........................39 Reprogramming the unlocking function......................................................39 Recalling a stored seat position...............135 Setting a memory pre-set.........................134 Message centre See: Information displays............................82 Mirrors See: Heated windows and mirrors...........112 See: Windows and mirrors..........................71 N Navigation introduction........................276 Navigation system commands..........265 Navigation system................................277 O Locks.........................................................37 Luggage anchor points........................169 Occupant protection..............................27 Principle of operation...................................27 Galaxy...........................................................169 S-MAX...........................................................170 Oil check Luggage covers.....................................176 See: Engine oil check.................................214 M See: Opening and closing the bonnet....206 O Maintenance.........................................205 General information...................................205 Technical specifications.............................216 Opening and closing the bonnet.......206 Closing the bonnet....................................206 Opening the bonnet..................................206 288 Index P Q Parking aid..............................................158 Quick start..................................................11 Principle of operation.................................158 Adjusting the steering wheel.......................13 Autolamps......................................................15 Automatic climate control............................17 Automatic transmission...............................18 Autowipers.....................................................14 Changing the wiper blades ........................14 Diesel particulate filter (DPF).......................18 Direction indicators.......................................15 Electric folding mirrors..................................15 Electric parking brake (EPB) ......................19 Engine idle speed after starting..................18 Information displays......................................16 Instrument panel overview - left-hand drive.............................................................11 Instrument panel overview - right-hand drive............................................................12 Manual climate control.................................17 Manual transmission.....................................18 Memory function...........................................17 Rear seat air vents........................................16 Reverse mirror dipping.................................16 Parking aid See: Using the parking aid........................158 Parking brake.........................................149 Applying the parking brake.......................149 Parking on a hill...........................................150 Releasing the parking brake.....................150 Parts and accessories..............................7 Look for the Ford logo on the following parts .............................................................8 Now you can be sure that your Ford parts are Ford parts..............................................7 Personalised settings.............................93 Help screen, radio, navigation and phone information................................................93 Language......................................................94 Navigation information................................93 Units of measure..........................................94 Power steering fluid check..................215 Topping up...................................................215 Programming the remote control........33 Programming a new remote control........33 Reprogramming the unlocking function......................................................33 R Rear fog lamps........................................53 Rear quarter windows............................75 Electric rear quarter windows....................76 Manual rear quarter windows....................75 Rear seats...............................................121 Creating a level load floor..........................125 Second row seats.......................................121 Third row seats...........................................123 Rear under floor storage......................172 S-MAX...........................................................173 Vehicles with a sliding loadspace floor...........................................................172 Rear window wiper and washers.........48 Intermittent wipe..........................................48 Reverse gear wipe.......................................49 Washer...........................................................49 Refuelling - E85......................................143 Refuelling................................................143 Remote control battery See: Changing the remote control battery........................................................33 289 Index Remote control programming Starting a petrol engine - E85.............138 See: Programming the remote control.....33 Starting at low ambient temperatures ...................................................................139 Removing a headlamp...........................58 Repairing minor paint damage............219 Retractable tow ball..............................186 Starting a petrol engine........................137 Cold or hot engine......................................138 Engine idle speed after starting...............138 Flooded engine...........................................138 Driving with a trailer....................................189 Maintenance...............................................189 Swivelling the tow ball in............................187 Swivelling the tow ball out.........................188 Starting the engine................................137 General information....................................137 Road Safety...........................................276 Steering wheel lock...............................137 Safety information......................................276 Vehicles with keyless starting...................137 Vehicles without keyless starting.............137 Roof racks and load carriers................176 Steering wheel.........................................45 Storage compartments........................131 Roof rack......................................................176 Run flat tyres..........................................229 Principle of operation................................229 Replacing run flat tyres.............................229 What to do if a run flat tyre has a puncture..................................................229 Front storage compartments....................131 Overhead storage compartments..........132 Rear storage compartment......................132 Under floor storage compartment..........133 Under seat storage compartment..........132 Running-in..............................................190 Sun blinds...............................................128 Brakes and clutch.......................................190 Engine...........................................................190 Tyres.............................................................190 Roof (Galaxy)...............................................128 Roof (S-Max)...............................................128 Side windows..............................................128 S Switching off the engine.......................140 Vehicles with a turbocharger....................140 Safety precautions.................................141 Seat back trays......................................133 Seat belt height adjustment..................30 Seat belt reminder...................................31 Symbols glossary.......................................7 Symbols in this handbook.............................7 Symbols on your vehicle................................7 T Deactivating the seat belt reminder...........31 Seats........................................................118 Sitting in the correct position................118 Sliding loadspace floor...........................171 Technical specifications.......................236 Technical specifications............................236 Telephone commands.........................261 Storage compartment................................171 Snow chains See: Cruise control.....................................160 Create a phonebook.................................263 Main settings..............................................265 Phone...........................................................261 Phone functions..........................................261 Stability control.......................................153 Telephone controls..............................243 See: Using snow chains............................230 Speed control Principle of operation.................................153 Remote control..........................................243 Stability control Telephone setup...................................242 See: Using stability control........................153 Starting a diesel engine........................139 Bond another Bluetooth phone..............243 Making a phone an active phone...........243 Phonebook.................................................242 Phonebook categories.............................243 Cold or hot engine......................................139 Telephone..............................................242 Starter switch See: Ignition switch.....................................137 General information...................................242 290 Index Telephone Using ACC..............................................163 See: Using the telephone - Vehicles With: Navigation System................................246 See: Using the telephone - Vehicles Without: Navigation System................................244 Automatic deactivation..............................165 Cancelling ACC...........................................165 Changing the set speed............................164 Resuming ACC...........................................165 Setting a speed...........................................164 Setting the vehicle gap..............................164 Switching ACC off.......................................165 Switching ACC on.......................................164 Towing a trailer.......................................183 Steep gradients..........................................183 Towing points........................................203 Installing the towing eye...........................203 Towing eye location...................................203 Using active suspension.......................157 Towing the vehicle on four wheels..................................................203 Selecting a setting......................................157 System malfunction....................................157 All vehicles...................................................203 Vehicles with automatic transmission...........................................204 Using an iPod.........................................272 CD Navigation units...................................274 DVD Navigation units.................................274 Sony radio...................................................273 Towing.....................................................183 Transmission..........................................146 Trip computer...........................................91 Using a USB device..............................270 CD Navigation units....................................271 DVD Navigation units.................................272 Sony radio...................................................270 Average fuel consumption..........................91 Average speed..............................................91 Distance to empty........................................91 Odometer.......................................................91 Outside air temperature...............................91 Tripmeter........................................................91 Type 1 and 2..................................................92 Type 3............................................................92 Using booster cables...........................220 To connect the booster cables...............220 To start the engine.....................................220 Using cruise control..............................160 Cancelling the set speed..........................160 Changing the set speed............................160 Resuming the set speed............................161 Setting a speed...........................................160 Switching cruise control off.......................161 Switching cruise control on.......................160 Type approvals......................................279 FCC/INDUSTRY CANADA NOTICE.........279 RX-42 - declaration of conformity...........279 Tyre care................................................230 Tyre pressure monitoring system.......231 Using hill start assist..............................154 Checking the tyre pressures....................231 Setting the vehicle load.............................231 Activating the HLA......................................155 Deactivating the HLA.................................156 Tyre pressures Using seat belts during pregnancy.......31 Using snow chains...............................230 See: Technical specifications...................232 Tyre repair kit.........................................225 Vehicles with stability control (ESP).........231 Checking the tyre pressure.....................228 General information...................................225 Inflating the tyre..........................................226 Using the tyre repair kit.............................225 Using stability control............................153 Using the parking aid............................158 Manoeuvring with the parking aid...........158 Switching the parking aid on and off.......158 Tyres Using the telephone - Vehicles With: Navigation System.............................246 See: Wheels and tyres..............................222 Changing the active phone......................247 Debonding a bonded phone...................248 Making a call...............................................247 Muting the microphone............................247 Receiving an incoming call.......................247 Receiving a second incoming call...........247 U USB port.................................................136 291 Index W Using the telephone - Vehicles Without: Navigation System.............................244 Changing the active phone......................246 Debonding a bonded phone...................246 Debonding a bonded phone - Sony radio.........................................................246 Making a call...............................................244 Muting the microphone............................245 Receiving an incoming call.......................245 Receiving a second incoming call...........245 Warning lamps and indicators...............79 ABS warning lamp........................................79 Airbag warning lamp....................................79 Brake system lamp......................................79 Cruise control indicator...............................79 Direction indicators.......................................79 Electric parking brake (EPB) warning lamp...........................................................80 Engine warning lamp...................................79 Forward alert indicator................................80 Front fog lamp indicator..............................80 Frost warning lamp......................................80 Glow plug indicator......................................80 Headlamp indicator......................................80 Ignition warning lamp...................................80 Low fuel level warning lamp.......................80 Main beam indicator....................................80 Message indicator.......................................80 Oil pressure warning lamp..........................80 Rear fog lamp indicator................................81 Seat belt reminder........................................81 Shift indicator.................................................81 Stability control (ESP) warning lamp..........81 Using voice control...............................249 Name tag....................................................250 System operation......................................249 Using winter tyres.................................230 V Vehicle battery......................................220 Vehicle care............................................218 Vehicle identification number (VIN)......................................................235 Vehicle identification plate...................235 Vehicle identification.............................235 Vehicle recovery...................................203 Ventilated seats.....................................126 Ventilation Warning triangle......................................191 Washer fluid check................................215 Washers See: Climate control...................................104 Vents See: Air vents..............................................104 See: Wipers and washers...........................47 VIN Washing See: Vehicle identification number (VIN).........................................................235 See: Cleaning the exterior.........................218 Wheels and tyres..................................222 Voice control.........................................249 General information...................................222 Technical specifications............................232 Principle of operation................................249 Windows and mirrors..............................71 Windscreen washers.............................48 Windscreen wipers.................................47 Intermittent wipe...........................................47 Winter tyres See: Using winter tyres.............................230 Wipers and washers...............................47 Technical specifications...............................51 292 Feel the difference AM2J-19A321-DA (CG3533en)