Ford - Focus - Owners Manual - 2011 - 2011 (1)

FORD FOCUS Owner's Manual The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted. © Ford Motor Company 2011 All rights reserved. Part Number: (CG3568en) 08/2011 20110622085519 Table of Contents Introduction Alarm About This Manual...........................................7 Symbols Glossary.............................................7 Parts and Accessories.....................................7 Principle of Operation..................................39 Arming the alarm...........................................40 Disarming the alarm.....................................40 At a Glance Steering Wheel At a Glance........................................................10 Adjusting the Steering Wheel.....................41 Audio Control....................................................41 Voice Control...................................................42 Child Safety Child Seats.........................................................17 Child Seat Positioning...................................18 Booster Seats..................................................20 ISOFIX Anchor Points....................................21 Child Safety Locks..........................................22 Wipers and Washers Windscreen Wipers.......................................43 Autowipers.......................................................43 Windscreen Washers....................................44 Rear Window Wiper and Washers...........44 Headlamp Washers......................................45 Checking the Wiper Blades........................45 Changing the Wiper Blades.......................45 Occupant protection Principle of Operation..................................24 Fastening the seat belts..............................25 Seat belt height adjustment......................26 Seat belt reminder.........................................26 Using seat belts during pregnancy...........27 Disabling the passenger airbag.................27 Lighting Lighting Control...............................................47 Autolamps........................................................48 Automatic Main Beam Control.................48 Front Fog Lamps............................................50 Rear Fog Lamps.............................................50 Adjusting the Headlamps - Vehicles With: Adaptive Front Lighting/Xenon Headlamps....................................................51 Headlamp Levelling.......................................51 Hazard Warning Flashers.............................51 Direction Indicators........................................52 Cornering Lamps............................................52 Interior Lamps.................................................53 Removing a Headlamp................................54 Changing a Bulb.............................................55 Bulb Specification Chart.............................62 Keys and Remote Controls General Information on Radio Frequencies..................................................29 Programming the remote control............29 Changing the remote control battery............................................................29 Locks Locking and Unlocking.................................32 Keyless Entry....................................................34 Global Opening and Closing......................36 Engine immobiliser Principle of Operation..................................38 Coded keys.......................................................38 Arming the engine immobiliser................38 Disarming the engine immobiliser...........38 Windows and Mirrors Power Windows..............................................63 1 Table of Contents Exterior Mirrors................................................64 Electric exterior mirrors................................65 Auto-Dimming Mirror...................................66 Blind Spot Monitor........................................66 Instrument Cluster Glasses Holder................................................112 Childminder Mirror.........................................112 Auxiliary input (AUX IN) socket................113 USB port............................................................113 Satellite Navigation Unit Holder..............113 Floor Mats.........................................................113 Gauges...............................................................69 Warning Lamps and Indicators..................71 Audible Warnings and Indicators..............73 Starting and Stopping the Engine General Information.....................................114 Ignition Switch................................................114 Steering Wheel Lock....................................114 Starting a Petrol Engine..............................115 Starting a Petrol Engine - E85..................115 Starting a Diesel Engine..............................116 Keyless Starting.............................................116 Diesel Particulate Filter...............................118 Switching Off the Engine............................119 Engine Block Heater.....................................119 Information Displays General Information......................................75 Trip Computer.................................................82 Personalised Settings..................................82 Information Messages.................................83 Climate Control Principle of Operation..................................94 Air Vents............................................................94 Manual Climate Control..............................95 Automatic Climate Control........................97 Heated Windows and Mirrors.................100 Electric sunroof.............................................100 Auxiliary Heater.............................................102 Start-Stop Principle of Operation.................................120 Using start-stop............................................120 Eco Mode Seats Principle of Operation.................................122 Using Eco mode............................................122 Sitting in the Correct Position..................105 Manual Seats.................................................105 Head Restraints............................................106 Power Seats...................................................108 Rear Seats.......................................................109 Heated Seats..................................................110 Fuel and Refuelling Safety Precautions.......................................123 Fuel Quality - Petrol.....................................123 Fuel Quality - E85.........................................123 Fuel Quality - Diesel.....................................123 Catalytic Converter......................................124 Fuel filler flap.................................................124 Refuelling.........................................................126 Refuelling - E85.............................................126 Fuel Consumption........................................127 Technical Specifications............................127 Convenience features Instrument Lighting Dimmer......................111 Clock....................................................................111 Cigar Lighter......................................................111 Auxiliary Power Points..................................111 Cup Holders.....................................................112 2 Table of Contents Using Adaptive Cruise Control................150 Forward alert function................................152 Transmission Manual Transmission..................................129 Automatic Transmission............................129 Speed Limiter Principle of Operation.................................153 Using the speed limiter...............................153 Brakes Principle of Operation.................................132 Hints on Driving With Anti-Lock Brakes...........................................................132 Parking Brake..................................................132 Driver Alert Principle of Operation.................................154 Using driver alert...........................................154 Stability Control Lane Departure Warning Principle of Operation.................................133 Using Stability Control................................133 Principle of Operation.................................156 Using lane departure warning.................156 Hill Start Assist Lane Keeping Aid Principle of Operation.................................134 Using hill start assist...................................134 Principle of Operation.................................158 Using the lane keeping aid........................158 Parking Aids Principle of Operation.................................136 Using the Parking Aid - Vehicles With: Rear Parking Aid.......................................136 Using the Parking Aid - Vehicles With: Front and Rear Parking Aid...................137 Traffic Sign Recognition Rear view camera Principle of Operation.................................162 Using Active City Stop................................162 Principle of Operation................................160 Using traffic sign recognition...................160 Active City Stop Principle of Operation................................140 Using the Rear View Camera...................140 Load Carrying General Information....................................164 Luggage Anchor Points..............................164 Luggage Covers.............................................164 Cargo Nets......................................................165 Dog Guard.......................................................166 Roof Racks and Load Carriers.................168 Active Park Assist Principle of Operation.................................143 Using active park assist..............................143 Cruise Control Principle of Operation................................146 Using Cruise Control...................................146 Towing Towing a Trailer.............................................170 Retractable tow ball....................................170 Tow Ball............................................................173 Adaptive cruise control (ACC) Principle of Operation................................148 3 Table of Contents Brake and Clutch Fluid Check................200 Washer Fluid Check...................................200 Technical Specifications............................201 Driving Hints Running-In.......................................................176 Cold Weather Precautions........................176 Driving Through Water................................176 Vehicle Care First Aid Kit.......................................................177 Warning Triangle............................................177 Cleaning the Exterior..................................204 Cleaning the Interior...................................204 Repairing Minor Paint Damage..............205 Fuses Vehicle battery Fuse Box Locations......................................178 Changing a Fuse............................................179 Fuse Specification Chart...........................180 Jump-Starting the Vehicle.......................206 Changing the Vehicle Battery.................207 Battery connection points........................207 Vehicle recovery Wheels and Tyres Towing Points................................................188 Towing the Vehicle on Four Wheels......188 General Information...................................208 Changing a Road Wheel...........................208 Tyre Repair Kit................................................213 Tyre Care..........................................................216 Using Winter Tyres........................................217 Using Snow Chains.......................................217 Tyre Pressure Monitoring System...........217 Technical Specifications............................218 Roadside Emergencies Maintenance General Information....................................190 Opening and Closing the Bonnet...........190 Under Bonnet Overview - 1.6L Duratec-16V Ti-VCT (Sigma)..............192 Under Bonnet Overview - 1.6L EcoBoost SCTi (Sigma).............................................193 Under Bonnet Overview - 1.6L Duratorq-TDCi (DV) Diesel..................194 Under Bonnet Overview - 2.0L Duratec-HE (MI4)....................................195 Under Bonnet Overview - 2.0L Duratorq-TDCi (DW) Diesel.................197 Engine Oil Dipstick - 1.6L Duratec-16V Ti-VCT (Sigma)........................................198 Engine Oil Dipstick - 1.6L EcoBoost SCTi (Sigma).......................................................198 Engine Oil Dipstick - 2.0L Duratec-HE (MI4).............................................................198 Engine Oil Dipstick - 1.6L Duratorq-TDCi (DV) Diesel/2.0L Duratorq-TDCi (DW) Diesel............................................................198 Engine Oil Check..........................................198 Engine Coolant Check................................199 Vehicle identification Vehicle Identification Plate.......................221 Vehicle Identification Number................222 Capacities and Specifications Technical Specifications...........................223 Audio introduction Important audio information...................227 Audio unit overview Audio unit overview....................................228 4 Table of Contents Bluetooth setup...........................................245 Telephone setup..........................................245 Telephone controls.....................................246 Using the telephone...................................246 Audio system security Security code.................................................234 Audio unit operation On/off control...............................................235 Sound button................................................235 Waveband button........................................235 Station tuning control................................235 Station preset buttons..............................236 Autostore control.........................................236 Traffic information control.......................236 Voice control Principle of Operation................................249 Using voice control.....................................249 Audio unit commands...............................250 Telephone commands...............................257 Climate control commands....................262 Audio unit menus Connectivity Automatic volume control.......................238 Digital signal processing (DSP).............238 News broadcasts.........................................238 Alternative frequencies.............................238 Regional mode (REG)................................239 General Information...................................265 Connecting an external device...............266 Connecting an external device - Vehicles With: Bluetooth........................................266 Using a USB device.....................................267 Using an iPod................................................268 Compact disc player Navigation introduction Compact disc playback............................240 Track selection.............................................240 Fast forward/reverse..................................240 Shuffle/random...........................................240 Repeat compact disc tracks...................240 Compact disc track scanning..................241 MP3 file playback.........................................241 MP3 display options....................................241 Ending compact disc playback..............242 General Information...................................270 Road Safety...................................................270 Navigation unit overview Navigation unit overview...........................272 Loading the navigation data....................276 Navigation Quick start Navigation Quick start................................277 Auxiliary input (AUX IN) socket System settings System settings...........................................280 Auxiliary input (AUX IN) socket.............243 Navigation system Audio troubleshooting Route options menu...................................283 Route displays..............................................284 Audio troubleshooting...............................244 Telephone Traffic Message Channel General Information...................................245 Principle of Operation................................285 5 Table of Contents Using TMC......................................................285 Map updates Map updates.................................................286 Appendices Type approvals.............................................287 Type approvals.............................................287 Type approvals.............................................287 Type approvals.............................................288 Type approvals.............................................288 Type approvals.............................................289 Electromagnetic compatibility..............289 6 Introduction ABOUT THIS MANUAL CAUTION You risk damaging your vehicle if you do not follow the instructions highlighted by the caution symbol. Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it. Symbols on your vehicle WARNING Always drive with due care and attention when using and operating the controls and features on your vehicle. When you see these symbols, read and follow the relevant instructions in this handbook before touching or attempting adjustment of any kind. Note: This manual describes product features and options available throughout the range, sometimes even before they are generally available. It may describe options not fitted to your vehicle. PARTS AND ACCESSORIES Note: Some of the illustrations in this manual may be used for different models, so may appear different to your vehicle. However, the essential information in the illustrations is always correct. Now you can be sure that your Ford parts are Ford parts Your Ford has been built to the highest standards using high quality Ford Original Parts. As a result, you can enjoy driving it for many years. Note: Always use and operate your vehicle in line with all applicable laws and regulations. Should the unexpected occur and a major part needs replacing, we recommend that you accept nothing less than Ford Original Parts. Note: Pass on this manual when selling your vehicle. It is an integral part of the vehicle. The use of Ford Original Parts ensures that your vehicle is repaired to its pre-accident condition and maintains its maximum residual value. SYMBOLS GLOSSARY Symbols in this handbook Ford Original Parts match Ford's stringent safety requirements and high standards of fit, finish and reliability. Quite simply, they represent the best overall repair value, including parts and labour costs. WARNING You risk death or serious injury to yourself and others if you do not follow the instructions highlighted by the warning symbol. 7 Introduction Now it is easier to tell if you have really been given Ford Original Parts. The Ford logo is clearly visible on the following parts if they are Ford Original Parts. If your vehicle has to be repaired, look for the clearly visible Ford branding and make sure that only Ford Original Parts have been used. Look for the Ford logo on the following parts Sheet metal • • • Bonnet Doors Luggage compartment lid or tailgate E132326 Exterior mirror E132340 Glass E132325 • • • Bumper and radiator grille • • Radiator grille Front and rear bumper 8 Rear window Side glass Windscreen Introduction E132327 Lighting • • Rear lamps Headlamp E132328 9 At a Glance Front exterior overview A B C D H F G E E133220 A See Locking and Unlocking (page 32). See Keyless Entry (page 34). B See Automatic Main Beam Control (page 48). See Driver Alert (page 154). See Lane Departure Warning (page 156). See Lane Keeping Aid (page 158). See Traffic Sign Recognition (page 160). See Active City Stop (page 162). C See Changing the Wiper Blades (page 45). D See Maintenance (page 190). E See Towing Points (page 188). 10 At a Glance F See Changing a Bulb (page 55). G Tyre pressures. See Technical Specifications (page 218). H See Changing a Road Wheel (page 208). Vehicle interior overview A B C D E I H E133222 G F A See Transmission (page 129). B See Locking and Unlocking (page 32). C See Power Windows (page 63). See Electric exterior mirrors (page 65). 11 At a Glance D See Head Restraints (page 106). E See Fastening the seat belts (page 25). F See Rear Seats (page 109). G See Manual Seats (page 105). See Power Seats (page 108). H See Parking Brake (page 132). I See Opening and Closing the Bonnet (page 190). Instrument panel overview Left-hand drive A B W E132738 C V D U T E S F R Q 12 P G O N M H I L K J At a Glance Right-hand drive I H M L B C S A Air vents. See Air Vents (page 94). B Direction indicators. See Direction Indicators (page 52). Main beam. See Lighting Control (page 47). C Left-hand drive vehicles with voice control - Information display control. See Information Displays (page 75). C Left-hand drive vehicles without voice control - Information display control. See Information Displays (page 75). C Right-hand drive vehicles with voice control - Information and entertainment display control. C Right-hand drive vehicles without voice control - Information display control. See Information Displays (page 75). 13 T F A P Q U E O K V D J E132739 N G R W At a Glance D Instrument cluster. See Gauges (page 69). See Warning Lamps and Indicators (page 71). E Left-hand drive vehicles with voice control - Information and entertainment display control. E Left-hand drive vehicles without voice control - Audio control. See Audio Control (page 41). E Right-hand drive vehicles with voice control - Information display control. See Information Displays (page 75). E Right-hand drive vehicles without voice control - Audio control. See Audio Control (page 41). F Wiper lever. See Wipers and Washers (page 43). G Information and entertainment display. H Audio unit. See Audio unit overview (page 228). I Door lock button. See Locking and Unlocking (page 32). J Hazard warning flasher switch. See Hazard Warning Flashers (page 51). K Parking aid switch. See Parking Aids (page 136). L Active park assist switch. See Active Park Assist (page 143). M Start-stop switch. See Using start-stop (page 120). N Heated rear window switch. See Heated Windows and Mirrors (page 100). O Heated windscreen switch. See Heated Windows and Mirrors (page 100). P Climate controls. See Climate Control (page 94). Q Start button. See Keyless Starting (page 116). R Ignition switch. See Ignition Switch (page 114). S Audio control. See Audio Control (page 41). Voice control. See Voice Control (page 42). Telephone control. See Telephone controls (page 246). T Steering wheel adjustment. See Adjusting the Steering Wheel (page 41). U Horn. V Cruise control switches. See Using Cruise Control (page 146). Adaptive cruise control (ACC) switches. See Using Adaptive Cruise Control (page 150). Speed limiter switches. See Using the speed limiter (page 153). W Lighting control. See Lighting Control (page 47). Front fog lamps. See Front Fog Lamps (page 50). Rear fog lamp. See Rear Fog Lamps (page 50). Headlamp levelling control. See Headlamp Levelling (page 51). Instrument lighting dimmer. See Instrument Lighting Dimmer (page 111). 14 At a Glance Rear exterior overview A B C D E133221 G H A See Changing the Wiper Blades (page 45). B See Changing a Bulb (page 55). C See Changing a Bulb (page 55). D See Fuel filler flap (page 124). E See Changing a Road Wheel (page 208). F Tyre pressures. See Technical Specifications (page 218). 15 F E At a Glance G See Towing Points (page 188). H See First Aid Kit (page 177). See Warning Triangle (page 177). See Tyre Repair Kit (page 213). Spare wheel. See Changing a Road Wheel (page 208). Jack. See Changing a Road Wheel (page 208). Wheel brace. See Changing a Road Wheel (page 208). Towing eye. See Towing Points (page 188). Fuel funnel. See Fuel filler flap (page 124). 16 Child Safety CHILD SEATS WARNINGS Do not leave unattended children in your vehicle. If your vehicle has been involved in an accident, have the child restraints checked by properly trained technicians. Note: Mandatory use of child restraints varies from country to country. E133140 Only child restraints certified to ECE-R44.03 (or later) have been tested and approved for use in your vehicle. A choice of these are available from your Dealer. Child restraints for different mass groups Use the correct child restraint as follows: Baby safety seat E68916 WARNINGS Secure children that are less than 150 centimetres (59 inches) tall in a suitable, approved child restraint, in the rear seat. Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an air bag in front of it! Read and follow the manufacturer’s instructions when you are fitting a child restraint. E68918 Secure children that weigh less than 13 kilograms (29 pounds) in a rearward facing baby safety seat (Group 0+) in the rear seat. Do not modify child restraints in any way. Do not hold a child on your lap when the vehicle is moving. 17 Child Safety Child safety seat WARNINGS Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an air bag in front of it! When using a child seat with a support leg, the support leg must rest securely on the floor. When using a child seat with a seat belt, make sure that the seat belt is not slack or twisted. CAUTION The child seat must rest tightly against the vehicle seat. It may be necessary to lift or remove the head restraint. See Head Restraints (page 106). E68920 Secure children that weigh between 13 and 18 kilograms (29 and 40 pounds) in a child safety seat (Group 1) in the rear seat. Note: When using a child seat on a front seat, always adjust the front passenger seat to its fully rearwards position. If it proves difficult to tighten the lap section of the seat belt without slack remaining, adjust the seatback to the fully upright position and raise the height of the seat. See Seats (page 105). CHILD SEAT POSITIONING WARNINGS Please consult your Dealer for the latest details relating to Ford recommended child seats. Mass group categories 0 0+ Seating positions Up to 10 kg Up to 13 kg (22 lbs) (29 lbs) 1 2 3 9 - 18 kg (20 - 40 lbs) 15 - 25 kg (33 - 55 lbs) 22 - 36 kg (49 - 79 lbs) Front passenger seat with airbag ON X X UF¹ UF¹ UF¹ Front passenger seat with airbag OFF U U U U U Rear seats U U U U U X Not suitable for children in this mass group. U Suitable for universal category child seats approved for use in this mass group. 18 Child Safety UF¹ Suitable for universal category forward facing child restraints approved for use in this mass group. However, we recommend that you secure children in a government approved child restraint, in the rear seat. ISOFIX child seats Mass group categories 0+ 1 Seating positions Front seat Size class Rear centre seat Forward facing 9 - 18 kg (20 - 40 lbs) Not ISOFIX equipped Seat type Rear outboard seat ISOFIX Rear facing Up to 13 kg (29 lbs) Size class C, D, E Seat type IL 2 Size class 1 A, B, B1, C, D 1 3 IL, IUF Not ISOFIX equipped Seat type IL Suitable for particular ISOFIX child restraints systems of the semi-universal category. Please consult child restraints systems suppliers' vehicle recommendation lists. IUF Suitable for ISOFIX forward facing child restraints systems of universal category approved for use in this mass group and ISOFIX size class. 1 The ISOFIX size class for both universal and semi-universal child restraints systems is defined by the capital letters A to G. These identification letters are displayed on ISOFIX child restraints. 2 At time of publishing the recommended Group O+ ISOFIX baby safety seat is the Britax Roemer Baby Safe. Please consult your Dealer for the latest details relating to Ford recommended child seats. 3 At time of publishing the recommended Group 1 ISOFIX child seat is the Britax Roemer Duo. Please consult your Dealer for the latest details relating to Ford recommended child seats. 19 Child Safety Booster seat (Group 2) BOOSTER SEATS WARNINGS Do not install a booster seat or a booster cushion with only the lap strap of the seat belt. Do not install a booster seat or a booster cushion with a seat belt that is slack or twisted. Do not put the seat belt under your child’s arm or behind its back. Do not use pillows, books or towels to boost your child’s height. Make sure that your children sit in an upright position. E70710 We recommend that you use a booster seat that combines a cushion with a backrest instead of a booster cushion only. The raised seating position will allow you to position the shoulder strap of the adult seat belt over the centre of your child’s shoulder and the lap strap tightly across its hips. Secure children that weigh more than 15 kilograms (33 pounds) but are less than 150 centimetres (59 inches) tall in a booster seat or a booster cushion. CAUTION Booster cushion (Group 3) When using a child seat on a rear seat, make sure that the child seat rests tightly against the vehicle seat. It may be necessary to lift or remove the head restraint. See Head Restraints (page 106). E68924 20 Child Safety Top tether anchor points - 4 door vehicles ISOFIX ANCHOR POINTS WARNING Use an anti-rotation device when using the ISOFIX system. We recommend the use of a top tether or support leg. Note: When you are purchasing an ISOFIX restraint, make sure that you know the correct mass group and ISOFIX size class for the intended seating locations. See Child Seat Positioning (page 18). Your vehicle is fitted with ISOFIX anchor points that accommodate universally approved ISOFIX child restraints. E132903 The ISOFIX system comprises of two rigid attachment arms on the child restraint that attach to anchor points on the rear seats, where the cushion and backrest meet. Tether anchor points may also be fitted. The tether anchor points are located under a flap. Attaching a child seat with top tethers Top tether anchor points - all vehicles WARNING Do not attach a tether strap to anything other than the correct tether anchor point. Note: Where applicable, remove the luggage cover to ease installation. See Luggage Covers (page 164). WARNING Make sure that the top tether strap is not slack or twisted and is properly located on the anchor point. 1. E132902 21 Route the tether strap to the anchor point. Child Safety E87145 2. Push the child seat back firmly to engage the ISOFIX lower anchor points. 3. Tighten the tether strap in line with the child seat manufacturer's instructions. E78298 Left-hand side Turn anti-clockwise to lock and clockwise to unlock. CHILD SAFETY LOCKS Right-hand side WARNING Turn clockwise to lock and anti-clockwise to unlock. You cannot open the doors from inside if you have put the child safety locks on. Electric child safety locks Manual child safety locks Note: Pressing the switch will also disable the rear electric window switches. Note: On vehicles with keyless entry, use the spare key. See Keyless Entry (page 34). 22 Child Safety E124779 23 Occupant protection Front airbags PRINCIPLE OF OPERATION Airbags WARNINGS Do not modify the front of your vehicle in any way. This could adversely affect deployment of the airbags. Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of it! E74302 Wear a seat belt and keep sufficient distance between yourself and the steering wheel. Only when you use the seat belt properly, can it hold you in a position that allows the airbag to achieve its optimum effect. See Sitting in the Correct Position (page 105). The driver airbag, front passenger airbag and the front seat belt pretensioners will deploy during significant frontal collisions or collisions that are up to 30 degrees from the left or the right. The airbags will inflate within a few thousandths of a second and deflate on contact with the occupants, thus cushioning forward body movement. During minor frontal collisions, overturns, rear collisions and side collisions, the driver and front passenger airbags will not deploy. Have repairs to the steering wheel, steering column, seats, airbags and seat belts carried out by a properly trained technician. Keep the areas in front of the airbags free from obstruction. Do not affix anything to or over the airbag covers. Side and curtain airbags Do not poke sharp objects into areas where airbags are fitted. This could damage and adversely affect deployment of the airbags. During significant lateral collisions, only the airbags on the side affected by the collision and the front seat belt pretensioners will deploy. The airbags will inflate within a few thousandths of a second and deflate on contact with the occupants, thus providing protection for the body. The side and curtain airbags will not deploy during minor lateral collisions, front collisions, rear collisions or overturns. Use seat covers designed for seats with side airbags. Have these fitted by a properly trained technician. Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys. This is normal. Note: Only wipe airbag covers with a damp cloth. 24 Occupant protection Side airbags WARNINGS Never use a seat belt for more than one person. Use the correct buckle for each seat belt. Do not use a seat belt that is slack or twisted. Do not wear thick clothing. The seat belt must fit tightly around your body to achieve its optimum effect. E72658 Position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips. Side airbags are fitted inside the seatback of the front seats. A label indicates that side airbags are fitted to your vehicle. Curtain airbags The driver and front passenger seat belt systems are fitted with a seat belt pretensioner. Seat belt pretensioners have a lower deployment threshold than the airbags. During minor collisions, it is possible that only the seat belt pretensioners will deploy. Status after a collision WARNINGS Seat belts subjected to strain, as a result of an accident, should be renewed and the anchorages checked by a properly trained technician. E75004 Curtain airbags are fitted inside the trim panels over the front and rear side windows. Moulded badges in the B-pillar trim panels indicate that curtain airbags are fitted to your vehicle. If a seat belt pretensioner has been deployed the seat belt must be renewed. FASTENING THE SEAT BELTS Seat belts WARNINGS Wear a seat belt and keep sufficient distance between yourself and the steering wheel. Only when you use the seat belt properly, can it hold you in a position to achieve its optimum effect. See Sitting in the Correct Position (page 105). WARNING Insert the tongue into the buckle until you hear a distinct click. You have not fastened the seat belt properly if you do not hear a click. 25 Occupant protection SEAT BELT HEIGHT ADJUSTMENT E74124 E87511 Note: Lifting the slider slightly while pressing the locking button makes it easier to release the locking mechanism. To raise or lower, press the locking button on the adjuster and move as necessary. SEAT BELT REMINDER WARNING The occupant protection system will only provide optimum protection when you use the seat belt properly. E85817 Pull the belt out steadily. It may lock if you pull it sharply or if the vehicle is on a slope. Press the red button on the buckle to release the belt. Let it retract completely and smoothly. The seat belt reminder warning lamp illuminates and an audible warning will sound if the driver's or front seat passenger's seat belt has not been fastened and the vehicle exceeds a relatively low speed. It will also illuminate if the driver's or front seat passenger's seat belt is unfastened when the vehicle is moving. The audible warning will go off after a few minutes but the seat belt reminder warning lamp will remain on until the driver's or front seat passenger's seat belt is fastened. 26 Occupant protection Rear seat belt reminder WARNING Position the seat belt correctly for your safety and that of your unborn child. Do not use only the lap strap or the shoulder strap. WARNING If multiple belts are unfastened within a few seconds of each other, only one audible chime will sound. Position the lap strap comfortably across your hips and low beneath your pregnant abdomen. Position the shoulder strap between your breasts, above and to the side of your pregnant abdomen. Note: Press the OK button on the steering wheel control to confirm the message. A visual reminder of the seat belt status will be shown on the instrument display once the engine is started, and once again if any are unfastened when the vehicle is moving. DISABLING THE PASSENGER AIRBAG Fastened seat belts are indicated by a tick symbol. WARNING If a belt is unfastened when the vehicle is moving, the seat belt status screen will be displayed and the relevant seats will be highlighted by an exclamation mark. An audible chime will also sound. Make sure that the passenger airbag is disabled when using a rearward facing child restraint on the front passenger seat. Deactivating the seat belt reminder See your dealer. USING SEAT BELTS DURING PREGNANCY E71313 Fitting the passenger airbag deactivation switch WARNING If you need to fit a child restraint on a seat protected by an operational airbag in front of it, have a passenger airbag deactivation switch fitted. Ask your dealer for further information. E68587 27 Occupant protection Note: The key switch is located in the glove compartment with an airbag deactivation lamp in the overhead console. If the airbag warning lamp illuminates or flashes when you are driving, this indicates a malfunction. See Warning Lamps and Indicators (page 71). Remove the child restraint and have the system checked immediately. Disabling the passenger airbag A B E71312 A Disabled B Enabled Turn the switch to position A. When you switch the ignition on, check that the passenger airbag deactivation warning lamp illuminates. Enabling the passenger airbag WARNING Make sure that the passenger airbag is enabled when you are not using a child restraint on the front passenger seat. Turn the switch to position B. 28 Keys and Remote Controls Note: Further remote controls may be programmed at this stage. GENERAL INFORMATION ON RADIO FREQUENCIES 4. Press any button on each additional remote control within 10 seconds of each other. CAUTIONS The radio frequency used by your remote control can also be used by other short distance radio transmissions (e.g. amateur radios, medical equipment, wireless headphones, remote controls and alarm systems). If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key. Reprogramming the unlocking function Note: When you press the unlock button either all the doors are unlocked or only the driver’s door is unlocked. Pressing the unlock button again unlocks all the doors. Press and hold the unlock and lock buttons on the remote key simultaneously for at least four seconds with the ignition off. The direction indicators will flash twice to confirm the change. Check your vehicle is locked before leaving it unattended. This will safeguard against any potential malicious frequency blocking. To return to the original unlocking function, repeat the process. Note: You could unlock the doors if you press the buttons on the remote control unintentionally. CHANGING THE REMOTE CONTROL BATTERY The operating range between your remote control and your vehicle varies depending on the environment. Make sure that you dispose of old batteries in an E107998 environmentally friendly way. Seek advice from your local authority regarding recycling. PROGRAMMING THE REMOTE CONTROL You can programme a maximum of eight remote controls to use with your vehicle (including any supplied with your vehicle). Remote control with a folding key blade Programming a new remote control 1. Insert the key in the ignition. 2. Cycle the key from position 0 to II and then back to 0 four times within six seconds. 3. Leave the key in position 0 and press any button on the remote control within 10 seconds. You will receive confirmation via a chime or LED that programming has been successful. 1 2 E128809 29 Keys and Remote Controls Remote control without a folding key blade 1. Insert a screwdriver in the position shown and gently push the clip. 2. Press the clip down to release the battery cover. 2 1 E128810 1 E87964 3. Carefully remove the cover. 1. Press and hold the pushbuttons on the edges to release the cover. Carefully remove the cover. 2. Remove the key blade. 3 E128811 4. Turn the remote control over to remove the battery. 5. Install a new battery (3V CR 2032) with the + facing upwards. 6. Replace the battery cover. E105362 3. Twist a flat bladed screwdriver in the position shown to separate the two halves of the remote control. 30 Keys and Remote Controls 4 E119190 4. Carefully insert the screwdriver in the position shown to open the remote control. 5 E125860 CAUTION Do not touch the battery contacts or the printed circuit board with the screwdriver. 5. Carefully prise out the battery with the screwdriver. 6. Install a new battery (3V CR 2032) with the + facing downwards. 7. Assemble the two halves of the remote control. 8. Install the key blade. 31 Locks Double locking with the key LOCKING AND UNLOCKING Turn the key to the lock position twice within three seconds. CAUTION Check your vehicle is locked before leaving it unattended. Double locking with the remote control Press the button twice within three seconds. Note: Do not leave your keys in the vehicle. Locking Unlocking Locking with the key Unlocking with the key Turn the top of the key towards the front of the vehicle. Turn the top of the key towards the rear of the vehicle. Locking with the remote control Unlocking with the remote control Note: The driver’s door can be locked with the key. This needs to be used if the remote control is not functioning. Note: The driver’s door can be unlocked with the key. This needs to be used if the remote control is not functioning. Note: Your vehicle can be locked with a rear door open. The door will be locked when it is closed. Note: If the vehicle remains locked for several weeks, the remote control will be disabled. The vehicle must be unlocked and the engine started using the key. Unlocking and starting the vehicle once will enable the remote control. Press the button. Press the button. Double locking WARNING Do not activate double locking when persons or animals are inside the vehicle. You will not be able to unlock the doors from the inside if you have double locked them. Automatic relocking The doors will relock automatically if you do not open a door, the luggage compartment lid, or turn on the ignition within 45 seconds of unlocking the doors with the remote control. The doors lock and the alarm will return to its previous state. Note: If you double lock your vehicle whilst inside, switch the ignition on to return the door locks to a single locked state. Reprogramming the unlocking function Note: Your vehicle can be double locked with a rear door open. The door will be double locked when it is closed. The unlocking function may be reprogrammed so that only the driver’s door is unlocked ( See Programming the remote control (page 29). ). Double locking is a theft protection feature that prevents someone from opening the doors from the inside. 32 Locks Locking and unlocking confirmation Locking the doors individually with the key Note: If your vehicle has double locking, the direction indicators will flash once after you have activated central locking, followed by two further flashes after double locking. Note: If the central locking function fails to operate, the doors can be individually locked using the key in the position shown. When you lock the doors, the direction indicators will flash once. When you double lock the doors, the direction indicators will flash three times. When you unlock the doors, the direction indicators will flash once. Locking and unlocking the doors from inside E102566 Press the button. For item location: See At a Glance (page 10). Luggage compartment lid Opening the luggage compartment lid with the remote control E112203 Left-hand side Press the button twice within three seconds. Turn clockwise to lock. Right-hand side Closing the luggage compartment lid Turn anti-clockwise to lock. Unlocking Note: If the child safety locks have also been activated, pulling the internal lever will only deactivate the emergency locking and not the child safety lock. The doors can only be opened using the external door handle. Note: If the doors have been unlocked using this method, the doors must be locked individually until the central locking function has been repaired. Unlock the driver's door using the key. The other doors can be unlocked individually by pulling the interior door handles on those doors. E133536 33 Locks Passive key KEYLESS ENTRY The vehicle can be locked and unlocked with the passive key. The passive key can also be used as a remote control. See Locking and Unlocking (page 32). General information WARNING The keyless entry system may not function if the key is close to metal objects or electronic devices such as mobile phones. Locking the vehicle WARNING The vehicle does not lock itself automatically. If the locking function is not activated, the vehicle will remain unlocked. The passive entry system will not function if: • The vehicle battery is flat. • The passive key frequencies are jammed. • The passive key battery is flat. Note: The ignition will automatically switch off when you lock your vehicle from the outside. This is to prevent the vehicle battery from discharging. Note: If the passive entry system does not function, you will need to use the key blade to lock and unlock your vehicle. Note: Do not grab the door handle. The keyless system allows the driver to operate the vehicle without the use of a key or remote control. E87384 Touch a front door handle lock sensor to lock the vehicle. To activate central locking and arm the alarm: • Touch a front door handle lock sensor once. E78276 Passive locking and unlocking requires a valid passive key to be located within one of the three external detection ranges. These are located approximately one and a half metres from the driver and front passenger door handles and the luggage compartment lid. To activate double locking and arm the alarm: • Touch a front door handle lock sensor twice within three seconds. Note: There must be clearance between each touch of the door handle. 34 Locks Note: Once activated, the vehicle will remain locked for approximately three seconds. When the delay period is over, the doors can be opened again, provided the passive key is within the respective detection range. Two short flashes of the direction indicators confirms that all the doors and the luggage compartment lid have been locked and that the alarm has been armed. Luggage compartment lid Note: The luggage compartment lid cannot be closed and, will pop back up if the passive key is located inside the vehicle with the doors locked. E78278 Open any door. Note: A valid passive key must be located within the detection range of that door. Note: If a second valid passive key is located within the rear exterior detection range, the luggage compartment lid can be closed. One long flash of the direction indicators confirms that all the doors and the luggage compartment lid have been unlocked and that the alarm has been disarmed. Unlocking the vehicle Unlocking only the driver's door Note: If the vehicle remains locked for longer than three days, the keyless system will enter an energy-saving mode. This is to reduce the discharge of the vehicle battery. When the vehicle is unlocked while in this mode, the reaction time of the system may be a little longer than normal. Unlocking the vehicle once will deactivate the energy-saving mode. If the unlocking function is reprogrammed so that only the driver’s door and the luggage compartment lid are unlocked ( See Programming the remote control (page 29). ), note the following: If the driver’s door is the first door which is opened, the other doors will remain locked. All the other doors can be unlocked from inside the vehicle by pressing the unlock button on the instrument panel. For item location: See At a Glance (page 10). Doors can be unlocked individually by pulling the interior door handles on those doors. Note: If the vehicle remains locked for several weeks, the keyless system will be disabled. The vehicle must be unlocked using the key blade. Unlocking the vehicle once will enable the keyless system. Note: Do not touch the front door handle lock sensor when opening a door. Disabled keys Any keys left inside the vehicle interior when it is locked will be disabled. A disabled key cannot be used to turn the ignition on or start the engine. 35 Locks Global opening In order to use these passive keys again, they have to be enabled. To enable all your passive keys, unlock the vehicle using a passive key or the remote control unlocking function. All passive keys will then be enabled if the ignition is turned on or the vehicle is started using a valid key. Locking and unlocking the doors with the key blade E71955 2 To open all the windows, press and hold the remote control unlock button for at least three seconds. Press the lock or unlock button to stop the opening function. 1 Global closing Vehicles without keyless entry E87964 WARNING 1 Take care when using global closing. In an emergency, press the lock or unlock button immediately to stop. 1. Carefully remove the cover. 2. Remove the key blade and insert it into the lock. Note: Only the driver's door handle is fitted with a lock cylinder. GLOBAL OPENING AND CLOSING You can also operate the electric windows with the ignition off via the global opening and global closing function. Note: Global closing will only operate if you have set the memory correctly for each window. See Power Windows (page 63). E71956 36 Locks To close all the windows, press and hold the remote control lock button for at least three seconds. Press the lock or unlock button to stop the closing function. The anti-trap function is also active during global closing. Vehicles with keyless entry E87384 WARNING Take care when using global closing. In an emergency, touch a door handle lock sensor to stop. Note: Global closing can be activated using the driver’s door handle. Global opening and closing can also be activated using the buttons on the passive key. To close all the windows, press and hold the driver’s door handle for at least two seconds. The anti-trap function is also active during global closing. 37 Engine immobiliser PRINCIPLE OF OPERATION The engine immobiliser is a theft protection system that prevents someone from starting the engine with an incorrectly coded key. CODED KEYS Note: Do not shield your keys with metal objects. This may prevent the receiver from recognising your key as a valid one. Note: Have all of your remaining keys erased and recoded if you lose a key. Ask your dealer for further information. Have replacement keys recoded together with your existing keys. If you lose a key, you can obtain a replacement from your Ford Dealer. If possible, provide them with the key number from the tag provided with the original keys. You can also obtain additional keys from your Ford Dealer. ARMING THE ENGINE IMMOBILISER The engine immobiliser is armed automatically a short time after you have switched the ignition off. DISARMING THE ENGINE IMMOBILISER The engine immobiliser is disarmed automatically when you switch the ignition on with a correctly coded key. 38 Alarm Battery back-up sounder PRINCIPLE OF OPERATION The battery back-up sounder is an extra alarm system which will sound a siren when the alarm is triggered. It is armed directly when you lock the vehicle. The sounder has its own battery and will sound an alarm siren even if someone disconnects the vehicle battery or the battery back-up sounder itself. Alarm system Your vehicle may be equipped with one of the following alarm systems: • • • Perimeter alarm. Perimeter alarm with interior sensors. Category one alarm with interior sensors and battery back-up sounder. Triggering the alarm Perimeter alarm Once armed, the alarm is triggered in any of the following ways: The perimeter alarm is a deterrent against unauthorised access to your vehicle through the doors and the bonnet. It also protects the audio unit. • • Interior sensors • • • If someone opens a door, the tailgate or the bonnet without a valid key or remote control. If someone removes the audio or navigation system. If the ignition is turned to position I, II or III without a valid key. If the interior sensors detect movement within the vehicle. On vehicles with a battery back-up sounder, if someone disconnects the vehicle battery or the battery back-up sounder itself. If the alarm is triggered, the alarm horn will sound for 30 seconds and the hazard warning flasher will flash for five minutes. E129005 WARNING Any further attempts to perform one of the above will trigger the alarm again. The sensors in the interior lamp unit must not be covered up. Do not activate the alarm with full guard if any persons, animals or other moving objects are inside the vehicle. Full and reduced guard Full guard Full guard is the standard setting. The sensors act as a deterrent against unauthorised intrusion by sensing any movement within the vehicle. In full guard, the interior sensors are activated when you arm the alarm. Note: This may result in false alarms if animals or moving objects are inside the vehicle. 39 Alarm Note: False alarms can also be triggered by the auxiliary heater See Auxiliary Heater (page 102). If you are using the auxiliary heater, direct the air flow towards the footwell. ARMING THE ALARM Reduced guard DISARMING THE ALARM In reduced guard, the interior sensors are deactivated when you arm the alarm. Vehicles without keyless entry Note: You can set the alarm to reduced guard for the current ignition cycle only. The next time you switch on the ignition, the alarm will be reset to full guard. Perimeter alarm To arm the alarm, lock the vehicle. See Locks (page 32). Disarm and silence the alarm by unlocking the doors with the key and switching the ignition on with a correctly coded key, or unlocking the doors or the luggage compartment lid with the remote control. Ask on Exit You can set the information display to ask you each time which level of guard you wish to set. Category one alarm Disarm and silence the alarm by unlocking the doors with the key and switching the ignition on with a correctly coded key within 12 seconds, or unlocking the doors or the luggage compartment lid with the remote control. If you select Ask on Exit, the message Reduced guard? appears in the instrument cluster display each time you switch the ignition off. If you wish to arm the alarm with reduced guard, press the OK button when this message appears. Vehicles with keyless entry If you wish to arm the alarm with full guard, leave the vehicle without pressing the OK button. Note: A valid passive key must be located within the detection range of that door for keyless entry. See Keyless Entry (page 34). Selecting full or reduced guard Perimeter alarm Note: Selecting Reduced does not set the alarm permanently to reduced guard. It sets it to reduced guard only for the current ignition cycle. If you regularly set the alarm to reduced guard, select Ask on Exit. Disarm and silence the alarm by unlocking the doors and switching the ignition on, or unlocking the doors or the luggage compartment lid with the remote control. Category one alarm You can select full or reduced guard using the information display. See General Information (page 75). Disarm and silence the alarm by unlocking the doors and switching the ignition on within 12 seconds, or unlocking the doors or the luggage compartment lid with the remote control. Information messages See Information Messages (page 83). 40 Steering Wheel ADJUSTING THE STEERING WHEEL WARNING Make sure that you fully engage the locking lever when returning it to its original position. WARNING Never adjust the steering wheel when the vehicle is moving. AUDIO CONTROL Select the required source on the audio unit. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 105). The following functions can be operated with the remote control: Type 1 2 A E 2 B D 1 E95178 C E129462 A Volume up B Seek up or next C Volume down D Seek down or previous E Mode Press the mode button to select the audio source. 3 E95179 41 Steering Wheel Type 2 VOICE CONTROL A D C B E129463 E129464 A Volume up B Seek up or next C Volume down D Seek down or previous Pull the button to select or deselect voice control. See Voice control (page 249). Seek, next or previous Press the seek button to: • tune the radio to the next or previous stored preset • play the next or the previous track. Press and hold the seek button to: • tune the radio to the next station up or down the frequency band • seek through a track. 42 Wipers and Washers Automatic wiper system WINDSCREEN WIPERS Some models without autowipers are fitted with a speed-dependent front screen wiper system. D C When the vehicle is slowed to walking speed or is brought to a standstill, the wiper speed will automatically switch to the next lower wiper speed setting. B When the vehicle speed is increased, the wiper speed will return to the manually-chosen setting. Moving the wiper lever when the system is operating will switch off the system. A If the vehicle is again slowed to walking speed or is brought to a standstill, the system is reactivated. E128444 A Single wipe B Intermittent wipe or autowipers C Normal wipe D High speed wipe AUTOWIPERS CAUTIONS Do not switch autowipers on in dry weather conditions. The rain sensor is very sensitive and the wipers may operate if dirt, mist or flies hit the windscreen. Intermittent wipe A B Replace the wiper blades as soon as they begin to leave bands of water and smears. If you do not replace them, the rain sensor will continue to detect water on the windscreen and the wipers will operate, even though the majority of the windscreen is dry. C Fully defrost the windscreen in icy conditions before you switch autowipers on. E128445 A Short wipe interval B Intermittent wipe C Long wipe interval Switch autowipers off before you enter a car wash. Note: If autolamps have been switched on in conjunction with autowipers, dipped headlamps will illuminate automatically when the rain sensor activates the windscreen wipers continuously. The rotary control can be used to adjust the intermittent wipe interval. 43 Wipers and Washers A WARNING B Do not operate the washer for more than 10 seconds at a time, and never when the reservoir is empty. Whilst the lever is pulled towards the steering wheel the washer will work in conjunction with the wipers. C After releasing the lever, the wipers operate for a short time. E128445 A High sensitivity B On C Low sensitivity REAR WINDOW WIPER AND WASHERS Intermittent wipe If you switch autowipers on, the wipers will not cycle until water is detected on the windscreen. The rain sensor will then continuously measure the amount of water on the windscreen and adjust the speed of the wipers automatically. Adjust the sensitivity of the rain sensor using the rotary control. With low sensitivity, the wipers will operate when the sensor detects a lot of water on the windscreen. With high sensitivity, the wipers will operate if the sensor detects a small amount of water on the windscreen. A B WINDSCREEN WASHERS E129193 A Intermittent wipe B Low speed wipe Press the button at the end of the lever to change between off, intermittent and low speed. E129188 44 Wipers and Washers Reverse gear wipe CHECKING THE WIPER BLADES The rear wiper will be activated automatically when selecting reverse gear if the rear wiper is not already switched on and the front wiper is operating. Rear window washer E66644 Run the tip of your fingers over the edge of the blade to check for roughness. E129194 WARNING Clean the wiper blade lips with water applied with a soft sponge. Do not operate the washer for more than 10 seconds at a time, and never when the reservoir is empty. CHANGING THE WIPER BLADES While the lever is pushed away from the steering wheel the washer will work in conjunction with the wipers. Windscreen wiper blades After releasing the lever, the wipers operate for a short time. CAUTIONS Set the windscreen wipers in the service position to change the wiper blades. HEADLAMP WASHERS You can use the service position in winter to provide easier access to the wiper blades for freeing them from snow and ice. The windscreen wipers will return to their normal position as soon as you switch on the ignition so make sure that the outside of the windscreen is free from snow and ice before you switch on the ignition. The headlamp washers will operate with the windscreen washers when the headlamps are on. Note: To stop the washer fluid reservoir emptying quickly, the headlamp washers will not operate every time that you use the windscreen washers. 45 Wipers and Washers Rear window wiper blade Service position 1. Lift the wiper arm. 3 4 E75184 2 E86456 2. Position the wiper blade at right angles to the wiper arm. 3. Disengage the wiper blade from the wiper arm. 4. Remove the wiper blade. Note: Make sure that the wiper blade locks into place. A E129986 Switch off the ignition and move the wiper lever to position A within three seconds. Release the lever when the windscreen wipers have moved to the service position. 5. Install in the reverse order. Changing the windscreen wiper blades Set the windscreen wipers in the service position and lift the wiper arms. 2 1 E72899 Install in the reverse order. Note: Make sure that the wiper blade locks into place. 46 Lighting One side LIGHTING CONTROL A Lighting control positions A B C B E130139 E132706 A Off B Side and tail lamps C Headlamps A Right-hand side B Left-hand side Main and dipped beam Parking lamps WARNING Prolonged use of the parking lamps will discharge the battery. Switch off the ignition. E130140 Both sides Push the lever forward to switch between main and dipped beam. Turn the lighting control switch to position B. Headlamp flasher Pull the lever slightly towards the steering wheel. 47 Lighting Home safe lighting The headlamps will come on and go off automatically depending on the ambient light. Switch the ignition off and pull the direction indicator lever towards the steering wheel to switch the headlamps on. You will hear a short tone. The headlamps will go off automatically after three minutes with any door open, or 30 seconds after the last door has been closed. The headlamps will remain on for a period of time after you switch the ignition off. You can adjust the time delay using the information display. See Information Displays (page 75). AUTOMATIC MAIN BEAM CONTROL The home safe lights can be cancelled by either pulling the direction indicator lever towards the steering wheel again or by turning the ignition switch ON. WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. A manual override may be necessary if the system fails to switch the main beam on or off. AUTOLAMPS WARNING In severe weather conditions, it may be necessary to switch your headlamps on manually. A manual override may be required when approaching other road users such as cyclists. Do not use the system in fog. Note: If you have switched autolamps on, you can only switch the main beam on when autolamps has switched the headlamps on. Note: If autolamps have been switched on in conjunction with autowipers, dipped headlamps will illuminate automatically when the rain sensor activates the windscreen wipers continuously. CAUTIONS In cold and severe weather conditions the system may not function. A manual override may be necessary in these cases. Reflective road signs may be detected as oncoming traffic and the headlamps may be switched to dipped beam. If the lights of oncoming vehicles are hidden by obstacles (for example guard rails) the system may not deactivate the main beam. Always fit Ford Original Parts when replacing headlamp bulbs. Other bulbs may reduce system performance. E132707 48 Lighting Activating the system CAUTIONS Check and replace wiper blades regularly to ensure the camera sensor has a clear view through the windscreen. Replacement wiper blades must be the correct length. Switch on the system using the information display and autolamps. See Information Displays (page 75). See Autolamps (page 48). Note: Keep the windscreen free from obstructions such as bird droppings, insects and snow or ice. The system will automatically switch on main beam if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street lighting ahead the system will switch off main beam before it can distract other road users. Dipped beams will remain on. A camera sensor is centrally mounted behind the windscreen of the vehicle, and monitors conditions continuously to decide when to switch the main beam off and on. E132707 Turn the switch to the autolamps position. Note: The system may take a short time to initialise after first switching the ignition on, especially in very dark conditions. The main beam will not automatically switch on during this period. Once the system is active the main beam will switch on if: • It is dark enough to require the use of main beams and • there is no traffic or street lighting ahead and • vehicle speed is greater than 40 km/h (25 mph). Setting the system sensitivity The system has three sensitivity levels which can be accessed via the information display. See Information Displays (page 75). The main beam will switch off if: • The ambient light is high enough that main beam is not required. • An approaching vehicle's headlamps or tail lamps are detected. • Street lighting is detected. • Vehicle speed falls below 25 km/h (16 mph). • The camera sensor is too hot or becomes blocked. The sensitivity determines the speed at which the main beam will be restored after detected traffic leaves the field of view. 49 Lighting Manually overriding the system E133632 Push or pull the lever to switch between main and dipped beam. E132709 Note: This is a temporary override and the system will return to automatic operation after a short period. REAR FOG LAMPS WARNINGS Only use the rear fog lamps when visibility is restricted to less than 50 metres (164 feet). To permanently deactivate the system use the information display menu or turn the lighting control switch from autolamps to headlamps. Do not use the rear fog lamps when it is raining or snowing and visibility is more than 50 metres (164 feet). FRONT FOG LAMPS WARNING Only use the front fog lamps when visibility is considerably restricted by fog, snow or rain. E132710 50 Lighting ADJUSTING THE HEADLAMPS - VEHICLES WITH: ADAPTIVE FRONT LIGHTING/XENON HEADLAMPS 2 To adjust the headlamps for driving on the left or right hand side of the road, see your dealer. 2 1 HEADLAMP LEVELLING Note: Vehicles with Xenon headlamps are equipped with automatic headlamp levelling. 1. E132711 2. Rotate the button to the required setting. 3. Push the button to the closed position. Press to release the pop out button. You can adjust the level of the headlamp beams according to the vehicle load. Recommended headlamp levelling switch positions Load 1 Load in luggage compartment Switch position - - 0 2 3 - 1 2 3 Max 1 - Max Front seats Second row seats 1-2 See Vehicle identification (page 221). HAZARD WARNING FLASHERS E71943 For item location: See At a Glance (page 10). 51 1 2 1 3 Lighting Note: Tap the lever up or down to make the direction indicators flash only three times. DIRECTION INDICATORS E130141 CORNERING LAMPS A A B B E72898 A Headlamp beam B Cornering lamp beam 52 Lighting The cornering lamps illuminate the inside of a corner when you are turning. If you press switch B all lamps remain off when the door is opened. Press the switch again to reverse. INTERIOR LAMPS You can control all lamps using switch C. Interior lighting Centre mounted lamp Note: Individual lamps may be switched on independently, but not off if all lamps have been switched on by the driver. B A Note: All other lamps will be either non-switchable or with individual reading or dome lamp functionality only. The lamps will come on when you unlock or open a door or the luggage compartment lid. If you leave a door open with the ignition switch off, all lamps will go off automatically after some time to prevent the vehicle battery from discharging. To switch them back on, switch on the ignition for a short time. E139420 Side mounted lamp A D C A Right-hand side reading lamp on and off switch B Left-hand side reading lamp on and off switch C Door function switch D All lamps on and off switch If you press switch C all lamps remain off when the door is opened. Press the switch again to reverse. You can control all lamps using switch D. Ambient lighting E139419 C If you leave a door open with the ignition switch off, the ambient lamp will go off automatically after some time to prevent the vehicle battery from discharging. B A Reading lamp on and off switch B Door function switch C All lamps on and off switch If dark, the ambient lights are active if the ignition and headlamps are switched on. 53 Lighting Type 1 1. Ambient lighting illuminates several areas, for example footwells, cup holders and doors with a single colour and can be switched on and off using the information display menu. See General Information (page 75). Open the bonnet. See Opening and Closing the Bonnet (page 190). 2 Use the instrument lighting dimmer switches to adjust to the desired brightness. See Instrument Lighting Dimmer (page 111). 4 Type 2 2 3 E133215 2. Remove the screws. 3. Pull the headlamp as far as possible towards the front of the vehicle to disengage it from the lower fixing point. 4. Lift the outer side of the headlamp and remove it. E133092 Ambient lighting illuminates several areas, for example footwells, cup holders and doors with a choice of several colours. The ambient lighting control switch is located in the overhead console. To activate, rotate the control knob and adjust to the desired brightness. Use the left switch to cycle through the colour choices. Use the right switch to activate all ambient light areas and interior lamps. REMOVING A HEADLAMP WARNING 5 Have Xenon bulbs changed by a trained technician. There is a risk of electric shock. E133750 5. Disconnect the electrical connector. 54 Lighting Note: When fitting the headlamp, make sure that you reconnect the electrical connector properly. A B C D Note: When fitting the headlamp, make sure that you fully engage the headlamp in the lower fixing point. Note: When fitting the headlamp, make sure that the screw is located in the headlamp moulding before you install it. E133102 CHANGING A BULB WARNINGS Switch the lights and the ignition off. Let the bulb cool down before removing it. A Side lamp B Headlamp dipped beam C Headlamp main beam D Direction indicator Direction indicator Have Xenon bulbs changed by a properly trained technician. There is a risk of electric shock. 1. Remove the headlamp. See Removing a Headlamp (page 54). 3 CAUTIONS Do not touch the glass of the bulb. Only fit bulbs of the correct specification. See Bulb Specification Chart (page 62). Note: The following instructions describe how to remove the bulbs. Fit replacements in the reverse order unless otherwise stated. Headlamp E133104 Note: Remove the covers to gain access to the bulbs. 2 2. Remove the cover. 3. Turn the bulb holder anti-clockwise and remove it. 4. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. 55 Lighting Headlamp main beam 2 4 CAUTION Do not touch the glass of the bulb. 1. Remove the headlamp. See Removing a Headlamp (page 54). 2 4 E133106 2. Remove the cover. 3. Disconnect the electrical connector. 4. Release the clip and remove the bulb. E133105 Side Lamp 2. Remove the cover. 3. Disconnect the electrical connector. 4. Release the clip and remove the bulb. 1. Remove the headlamp. See Removing a Headlamp (page 54). 3 Headlamp dipped beam CAUTION Do not touch the glass of the bulb. 1. Remove the headlamp. See Removing a Headlamp (page 54). E133103 2 2. Remove the cover. 3. Remove the bulb holder. 4. Remove the bulb. 56 Lighting Side repeater 1 E133426 1. Carefully remove the cover. E133109 4. Remove the bulb holder. 5. Remove the bulb. Approach lamp CAUTION When removing the mirror glass, take care not to break it. Note: Position the mirror glass as far inwards as possible. E133427 2. Using a suitable implement release the retaining clip. E133108 E133110 3. Carefully remove the side repeater. 57 Lighting 1. Insert your fingers into the gap between the mirror housing and the mirror glass and pull gently to remove the mirror glass. 3 2 E133717 2. Remove the lamp. 2 E133107 E133718 3 Note: You cannot separate the fog lamp bulb from the bulb holder. 3. Remove the bulb. 2. Disconnect the electrical connector. 3. Turn the bulb holder anti-clockwise and remove it. Front fog lamps 1. Remove the headlamp. See Removing a Headlamp (page 54). Rear lamps - 5 door E133111 1. 58 Remove the trim panel. Lighting A B 2 C D E133112 E133113 2. Remove the wing nuts and detach the clip. 3. Remove the lamp. 5. Remove the bulb holder. 6. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. A. Brake lamp B. Reversing lamp C. Tail and fog lamp D. Direction indicator 4 Rear lamps - 4 door Direction indicator, tail and fog lamp E133127 4. Disconnect the electrical connector. E133702 1. 59 Remove the trim panel. Lighting 6. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. A. Tail and fog lamp B. Direction indicator Brake and reversing lamp 1. 2 Open the luggage compartment lid. x10 2 E133703 2. Remove the wing nuts and detach the clip. 3. Remove the lamp. E133724 2. Remove the luggage compartment lid trim. 4 E133713 3 4. Disconnect the electrical connector. B E133725 E133714 CAUTION A Unclip the outboard side first. 5. Remove the bulb holder. 60 Lighting Number plate lamp 3. Remove the wing nut and detach the 2 clips. 4. Remove the lamp. Note: These are not serviceable items, please consult your dealer if they fail. Interior lamps Vehicles with LED lamps Note: The LED board is not a serviceable item, please consult your dealer if this fails. 5 E133726 5. Disconnect the electrical connector. B E125092 Luggage compartment lamp, footwell lamp and tailgate lamp A E133727 6. Remove the bulb holder. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. A. Brake lamp B. Reversing lamp Central high mounted brake lamp Note: These are not serviceable items, please consult your dealer if they fail. E72784 1. Carefully prise out the lamp. 2. Remove the bulb. 61 Lighting BULB SPECIFICATION CHART Lamp Specification Power (watt) PY21W 21 Headlamp main beam H1 55 Headlamp dipped beam H7 55 Cornering lamp H1 55 Front fog lamp H11 55 W5W 5 WY5W 5 Front direction indicator Side lamp Side repeater Approach lamp 1 W5W 5 Rear direction indicator PY21W 21 Brake and tail lamp P21/5W 21/5 W5W 5 Tail lamp Rear fog lamp P21W 21 Reversing lamp W16W 16 Luggage compartment lamp W5W 5 1 Fit a replacement with the same rating as the one you have removed. 62 Windows and Mirrors POWER WINDOWS Opening and closing the windows automatically WARNING Press or lift the switch to the second action point and release it completely. Press or lift it again to stop the windows. Do not operate the electric windows unless they are free from obstruction. Safety switch for rear windows Note: If you operate the switches often during a short period of time, the system might become inoperable for a certain time to prevent damage due to overheating. WARNING On some vehicles, pressing the switch will also lock the rear doors from inside. See Child Safety Locks (page 22). Switch on the ignition to operate the electric windows. Global opening and closing Note: You can always operate the rear windows from the driver’s door. You can also operate the electric windows with the ignition off via the global opening and closing function. See Locks (page 32). Driver's door switches You can operate all the windows with the switches on the door trim panel of the driver’s door. E70850 A switch in the driver’s door disables the rear electric window switches. The light in the switch comes on and the lights in the rear window switches go off when the rear windows are disabled. Anti-trap function E70848 WARNING Careless closing of the windows can override the protection function and cause injuries. 63 Windows and Mirrors 3. Lift the switch again for one more second. 4. Push and hold the switch until the window is fully open. 5. Release the switch. 6. Lift and hold the switch until the window is fully closed. 7. Open the window and try to close it automatically. 8. Reset and repeat procedure if the window does not close automatically. The electric windows will stop automatically while closing and reverse some distance if there is an obstacle in the way. Overriding the anti-trap function WARNING While you close the window for the third time, the anti-trap function is disabled. Make sure there are no obstacles in the way of the closing window. To override this protection function when there is a resistance, e.g. in the winter, proceed as follows: EXTERIOR MIRRORS WARNING 1. Close the window twice until it reaches the resistance and let it reverse. 2. Close the window a third time to the resistance. The anti-trap function is disabled and you cannot close the window automatically. The window will override the resistance and you can close it fully. 3. If the window does not close after the third attempt, have it checked by an expert. Do not overestimate the distance of the objects that you see in the convex mirror. Objects seen in convex mirrors will appear smaller and further away than they actually are. Manual folding mirrors Folding Push the mirror towards the door window glass. Resetting the memory of the electric windows Unfolding Make sure that you fully engage the mirror in its support when returning it to its original position. WARNING The anti-trap function is deactivated until you have reset the memory. After the battery has been disconnected from the vehicle you must reset the memory separately for each window: Note: On vehicles with a convertible top, the roof and doors must be fully closed before carrying out the following procedure. 1. Lift and hold the switch until the window is fully closed. 2. Release the switch. 64 Windows and Mirrors Electric folding mirrors ELECTRIC EXTERIOR MIRRORS Automatic folding and unfolding Note: If the mirrors have been folded using the manual fold button they can only be unfolded using the manual fold button. The mirrors will fold automatically when you lock the vehicle with the key, the remote control or a keyless entry system request. The mirrors will unfold when you unlock the vehicle with the key, the remote control, a keyless entry system request, the driver's interior door handle or starting the engine. A C Manual folding and unfolding B E70846 A Left-hand mirror B Off C Right-hand mirror The electric folding mirrors operate with the ignition on. Note: You can operate the mirrors (mirror tilting and folding) for several minutes after you switch off the ignition. They will be deactivated as soon as a door is opened. Mirror tilting positions E70847 E72623 The electric exterior mirrors are fitted with a heating element that will defrost or demist the mirror glass. See Heated Windows and Mirrors (page 100). Press the button to fold or unfold the mirrors. 65 Windows and Mirrors If you press the switch again while the mirrors are moving, they will stop and reverse the direction of movement. The system is a convenience feature that aids the driver in detecting vehicles that may have entered the blind spot zone (A). The detection area is on both sides of the vehicle extending rearwards from the exterior mirrors to approximately 3 metres (10 feet) beyond the bumper. The system will alert you if certain vehicles enter the blind spot zone whilst driving. Note: When the mirrors are operated often during a short period of time, the system may become inoperable for a period of time to prevent damage due to overheating. AUTO-DIMMING MIRROR A E71028 A The auto-dimming mirror will adjust automatically when hit by glaring light from behind. It will not work when you have selected reverse gear. E124788 Using the system BLIND SPOT MONITOR The system displays a yellow indicator located in the exterior mirrors. Blind spot information system (BLIS) WARNINGS The system is not designed to prevent contact with other vehicles or objects. The system only provides a warning to assist you in detecting vehicles in the blind spot zones. The system will not detect obstacles, pedestrians, motorcyclists or cyclists. Do not use the system as a replacement for using the side and rear view mirrors, and looking over your shoulder before changing lanes. The system is not a replacement for careful driving and is only to be used as an aid. E124736 Note: Both indicators will illuminate briefly when you switch the ignition on to confirm that the system is operational. 66 Windows and Mirrors Note: On vehicles with automatic transmission, the system is active only in S, D and N. Detection limitations There may be certain instances where vehicles entering and exiting the blind spot zones may not be detected. The system is only active when you exceed 10 km/h (6 mph). The system is temporarily deactivated when you select reverse gear. Instances which may cause non-detection: • Debris build up on the rear bumper panels in the area of the sensors. • Certain manoeuvring of vehicles entering and exiting the blind zone. • Vehicles passing through the blind zone at high speed. • Severe weather conditions. • Several vehicles passing through the blind zone following each other closely. System detection and alerts The system will trigger the alert for vehicles that enter the blind spot zone from the rear or merge from the side. Vehicles that you pass, or vehicles that enter the blind spot zone from the front, will only trigger the alert after the vehicle has remained in the blind spot zone for a short period of time. Note: Vehicles that pass through the blind zone quickly (typically less than 2 seconds) will not trigger the alert. False alerts Note: False alerts are temporary and will self correct. The system consists of two radar sensors each located behind the rear wheels hidden behind the bumpers. There may be certain instances when the system will alert with no vehicle present in the blind zone. CAUTIONS Do not place items such as bumper stickers in this area. Circumstances where false alerts may occur: • Road guardrails. • Motorway concrete walls. • Construction areas. • Sharp turns around a building. • Bushes and trees. • Cyclists and motorcyclists. • Coming to a stop with a vehicle directly behind but very close. Repairs to these areas using body filler will affect the performance of the system. Turning the system on and off Note: The on or off position will remain until manually changed. You can turn the system on and off using the information display. See Information Displays (page 75). E124741 67 Windows and Mirrors When you turn the system off no further alerts will be received. The BLIS warning indicator will illuminate. See Warning Lamps and Indicators (page 71). Trailer towing false alerts CAUTION Vehicles fitted with a trailer tow module not approved by us may not correctly be detected. Switch the system off to avoid false alerts. See Information Displays (page 75). Detection errors Note: The alert indicator in the mirror will not illuminate. If the system senses a fault on either sensor, the system warning symbol will illuminate and remain on. The information display will confirm the fault and indicate whether the left or right side is affected. If the vehicle is fitted with a trailer tow module approved by us, the system will detect a connected trailer and deactivate. A confirmation message will be shown in the information display. See Information Messages (page 83). The BLIS warning indicator will illuminate. See Warning Lamps and Indicators (page 71). Blocked sensor WARNING Prior to the system recognizing a blocked condition and issuing a warning, the number of missed objects will increase. CAUTION The sensors may not detect vehicles in heavy rain or other conditions that cause disruptive reflections. Note: Keep the rear bumper area surrounding the sensors free from dirt, ice and snow. If a sensor becomes blocked the system performance may degrade. A blocked sensor message may be displayed. The system will automatically return to normal operation once two other vehicles have been detected on both sides. 68 Instrument Cluster GAUGES Type 1 A F E D C E132065 A Information display. See Information Displays (page 75). B Speedometer C Engine coolant temperature gauge D Tripmeter reset button E Fuel gauge F Tachometer 69 B Instrument Cluster Type 2 and 3 A E D C B E130149 A Information display. See Information Displays (page 75). B Speedometer C Engine coolant temperature gauge D Fuel gauge E Tachometer If the needle enters the red section, the engine is overheating. Stop the engine, switch the ignition off and determine the cause once the engine has cooled down. See Engine Coolant Check (page 199). Engine coolant temperature gauge All vehicles Shows the temperature of the engine coolant. At normal operating temperature, the needle will remain in the centre section. Fuel gauge The arrow adjacent to the fuel pump symbol indicates on which side of the vehicle the fuel filler cap is located. CAUTION Do not restart the engine until the cause of overheating has been resolved. 70 Instrument Cluster Brake system lamp WARNING LAMPS AND INDICATORS It illuminates when the parking brake is engaged. The following warning lamps and indicators illuminate when the ignition is switched on: • • • • • • • WARNING Reduce your speed gradually and stop your vehicle as soon as it is safe to do so. Use your brakes with care. Airbag ABS Stability control (ESP) Low fuel Brake system Frost ESP off If it illuminates when you are driving, check that the parking brake is not engaged. If the parking brake is not engaged, this indicates a malfunction. Have the system checked by a properly trained technician immediately. If a warning or indicator lamp does not illuminate when the ignition is switched on, it indicates a malfunction. Have the system checked by properly trained technician. Cruise control indicator It will illuminate when you have set a speed using the cruise E71340 control system. See Using Cruise Control (page 146). ABS warning lamp If it illuminates when you are driving, this indicates a malfunction. You will continue to have normal braking (without ABS). Have the system checked by a properly trained technician as soon as possible. Direction indicators Flashes during operation. A sudden increase in the rate of flashing warns of a failed indicator bulb. See Changing a Bulb (page 55). Airbag warning lamp Engine warning lamp If it illuminates when you are driving, this indicates a malfunction. Have the system checked by a properly trained technician. If it illuminates with the engine running, this indicates a malfunction. If it flashes when you are driving, reduce the speed of your vehicle immediately. If it continues to flash, avoid heavy acceleration or deceleration. Have the system checked by a properly trained technician immediately. Blind spot monitor indicator It will illuminate when this feature is deactivated or in E124823 conjunction with a message. See Blind Spot Monitor (page 66). See Information Messages (page 83). CAUTION If the engine warning lamp illuminates in conjunction with a message, have the system checked as soon as possible. 71 Instrument Cluster Forward alert warning indicator Lane departure warning indicator It will illuminate when this feature is switched off or in conjunction with a message. See Forward alert function (page 152). It will illuminate when this feature is switched off or in conjunction with a message. See Lane Departure Warning (page 156). Front fog lamp indicator Low fuel level warning lamp It will illuminate when you switch the front fog lamps on. If it illuminates, refuel as soon as possible. Low tyre pressure warning lamp Frost warning lamp See Tyre Pressure Monitoring System (page 217). WARNING Even if the temperature rises to above +4°C (39°F) there is no guarantee that the road is free of hazards caused by inclement weather. Main beam indicator It will illuminate when you switch the headlamp main beam on. It will flash when you use the headlamp flasher. It will illuminate and glow amber when the outside air temperature is between +4°C (39°F) and 0°C (32°F). It will glow red when the temperature is below 0°C (32°F). Message indicator It will illuminate when a new message is stored in the information display. See Information Messages (page 83). Glow plug indicator See Starting a Diesel Engine (page 116). Oil pressure warning lamp Headlamp indicator CAUTION Do not resume your journey if it illuminates despite the level being correct. Have the system checked by a properly trained technician immediately. It will illuminate when you switch the headlamp dipped beam or the side and tail lamps on. Ignition warning lamp If it stays on after starting or illuminates when driving, this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level. See Engine Oil Check (page 198). If it illuminates when you are driving, this indicates a malfunction. Switch off all unnecessary electrical equipment. Have the system checked by a properly trained technician immediately. 72 Instrument Cluster Rear fog lamp indicator 1. It will illuminate when you switch the rear fog lamps on. 2. Seat belt reminder 3. See Seat belt reminder (page 26). 4. Stability control (ESP) indicator 5. While driving, it flashes during activation of the system. After switching on the ignition, if it does not illuminate or illuminates continuously while driving, this indicates a malfunction. During a malfunction, the system switches off. Have the system checked by a properly trained technician as soon as possible. Press the left arrow button on the steering wheel to enter the main menu. Highlight Settings with the up and down arrow buttons and press the right arrow button. Highlight Chimes and press the right arrow button. Highlight Information or Warning and press the OK button to switch the chime on and off. Press the left arrow button to exit the menu. Press and hold the left arrow button to return to the main menu display. Automatic transmission If position P is not selected, a warning chime will sound when the driver’s door is opened. Frost If you switch traction control off, the warning lamp will illuminate. The lamp will go out when you switch the system back on or when you switch the ignition off. WARNING Even if the temperature rises to above +4°C (39°F) there is no guarantee that the road is free of hazards caused by inclement weather. Start-stop indicator It will illuminate to inform you when the engine shuts down or in conjunction with a message. See Using start-stop (page 120). See Information Messages (page 83). A warning chime will sound in the following conditions: • +4°C (39°F) or lower: frost warning. • 0°C (32°F) or lower: danger of icy roads. AUDIBLE WARNINGS AND INDICATORS Key outside car Switching the chimes on and off If the engine is running and a passive key is no longer detected within the vehicle interior, a warning chime will sound. Vehicles with keyless entry You can deactivate certain chimes in the Information display using the steering wheel control. For item location: See At a Glance (page 10). To set which chimes should sound: 73 Instrument Cluster Door open A warning chime will sound when any door is opened if the vehicle exceeds a relatively low speed. Lights on A warning chime will sound if the driver’s door is opened with the exterior lights switched on and the ignition switched off. Low fuel A warning chime will sound when the remaining fuel is less than approximately 6 litres (1.3 gallons). Seat belt reminder See Seat belt reminder (page 26). 74 Information Displays GENERAL INFORMATION Phone Note: The information display will remain on for several minutes after you switch off the ignition. Settings Various systems on your vehicle can be controlled using the information display controls on the steering column. Corresponding information is displayed in the information display. Controls Press the up and down arrow buttons to scroll through and highlight the options within a menu. For detailed instructions on navigation, refer to the appropriate manual. Press the right arrow button to enter a sub-menu. Device list Press the left arrow button to exit a menu. The icon changes to show the current function in use. Hold the left arrow button pressed at any time to return to the main menu display (escape button). CD Press the OK button to choose and confirm a setting. Radio Menu structure - information display Auxiliary input All vehicles You can access the menu using the Information display control. For item location: See At a Glance (page 10). 75 Information Displays Trip Computer Trip odometer Dist to empty Instant fuel Average fuel Ford EcoMode Gear shifting Anticipation Speed Ford EcoMode Average speed Outside air All values Information Seatbelts Auto StartStop Driver Alert Traffic signs Settings Driver assist Traction ctrl BLIS City Stop Forward alert Driver alert Hill start assist Deflation detection Traffic signs Lane departure Auto light rain Ambient light Dimming Lighting Auto highbeam Hdlamp delay A B E133367 76 High Sensitivity Normal Sens Low Sensitivity Off Recognition Speed warning Sensitivity Intensity Auto Manual Set On Sensitivity Manual 20 seconds 40 seconds 60 seconds Information Displays A B Display Navigation info Always on On demand Always off Language English Deutsch Italiano Français Español Türkçe Pyccкий Nederlands Polski Svenska Português Measure unit l/100km Miles/Gallon Temp unit °Celsius °Fahrenheit Chimes Park slot found Information Warning Convenience Aux heater Park heater Alarm System check E133368 77 Time 1 Time 2 Once Heat now Full guard Reduced Ask on exit Information Displays Menu structure - information and entertainment display You can access the menu using the buttons on the audio or navigation unit. All vehicles CD Radio FM FM AST DAB1 DAB2 AM AM AST Auxiliary iPOD USB Bluetooth audio Line in Phone Dial number Phone book Call lists Bluetooth Redial Select phone Reject all calls Menu Audio settings Adaptive volume Sound Nav audio mixing DSP settings DSP equaliser News Alt frequency RDS regional DAB service link Bluetooth Clock settings Set time Set date GPS time Set time zone Summertime 24-hour mode E130532 78 Information Displays Menu structure - information and entertainment display You can access the menu using the Information and entertainment display control. For item location: See At a Glance (page 10). 79 Information Displays Vehicles with navigation system Navigation Active guidance Route sections list Route Block next section Unblock rt sectn Country City/postcode Destination input Street District Start guidance TA TMC messages Traffic Block next section Route sections list Unblock rt sectn Start guidance Change address Home address Last destinations Favourites Favourites A-Z Points of interest POIs nearby Near destination Along motorway POIs near address Search by name New tour Stored tours Tour planning Store position Route Route options Eco Fast Short Driver Always ask Leisurely Normal Fast A B C E130534 80 Information Displays A B C Eco settings Trailer Roof box Dynamic Motorway Tunnel Ferry/motorail Toll Seasonal roads Toll sticker Special functions GPS info System info Enter position Demo mode CD See separate menu structure Radio See separate menu structure Auxiliary See separate menu structure Phone See separate menu structure Menu Navigation Route options Map display B C E130535 81 Route Driver Eco Settings Dynamic Motorway Tunnel Ferry/motorail Toll Seasonal roads Toll sticker Map content Arrows on map Nav time display Map heading up Best contrast Information Displays B C Assistance options Signs/lanes Speed limits Nav icons in lists Personal data Clear last destination Clear favourites Delete home address Clear all Reset all settings Audio Settings Clock Settings See separate menu structure See separate menu structure E130536 Outside air temperature TRIP COMPUTER Shows the outside air temperature. Trip Odometer Odometer Registers the mileage of individual journeys. Registers the total mileage of the vehicle. Resetting the trip computer Distance to empty To reset a particular display: Indicates the approximate distance the vehicle will travel on the fuel remaining in the tank. Changes in driving pattern may cause the value to vary. 1. Highlight Trip Computer with the up and down arrow buttons and press the right arrow button. 2. Highlight the function to be reset. 3. Hold the OK button pressed. Instantaneous fuel consumption Indicates the current average fuel consumption. PERSONALISED SETTINGS Average fuel consumption Language setting Indicates the average fuel consumption since the function was last reset. A choice of eleven languages are available: Average speed English, German, Italian, French, Spanish, Turkish, Russian, Dutch, Polish, Swedish and Portuguese. Indicates the average speed calculated since the function was last reset. 82 Information Displays Measure units To toggle between metric and imperial units, scroll to this display and press the OK button. Toggling the units of measure using this display will affect the following displays: • Distance to empty. • Average fuel consumption. • Instantaneous fuel consumption. • Average speed. Temperature units E130248 To toggle between metric and imperial units, scroll to this display and press the OK button. Press the OK button to acknowledge and remove some messages from the information display. Other messages will be removed automatically after a short time. Toggling the temperature units using this display will affect the following displays: • Outside air temperature. • The temperature display in the automatic climate control. Certain messages need to be confirmed before you can access the menus. Message indicator Chime deactivation The message indicator illuminates to supplement some messages. It will be red or amber depending on the severity of the message and will remain on until the cause of the message has been rectified. The following chimes can be deactivated: • Warning messages. • Information messages. INFORMATION MESSAGES Some messages will be supplemented by a system specific symbol with a message indicator. Note: Certain messages may be abbreviated or shortened depending upon which cluster type you have. 83 Information Displays Active City Stop Message Indicator Active City Stop Sensor blocked Clean screen amber Active City Stop not available amber Active City Stop Auto braking - Action See Using Active City Stop (page 162). See Using Active City Stop (page 162). See Using Active City Stop (page 162). Airbag Message Airbag malfunction service now Message indicator amber Action Have the system checked by a properly trained technician as soon as possible. Alarm Message Message indicator Alarm triggered check vehicle amber Alarm malfunction service required - Action See Alarm (page 39). Have the system checked by a properly trained technician. Automatic main beam control Message Indicator Action Front camera low visibility Clean screen amber The front camera sensor has reduced visibility. Clean the windscreen. Front camera malfunction Service required amber The front camera sensor has malfunctioned. Have this checked as soon as possible. 84 Information Displays Battery and charging system Message Electrical system over voltage stop safely Battery low check handbook Message indicator Action red Stop your vehicle as soon as it is safe to do so and switch off the ignition. Have the system checked by a properly trained technician as soon as possible. amber Have the system checked by a properly trained technician as soon as possible. Blind spot monitor Message Message indicator BLIS low visibility check handbook amber See Blind Spot Monitor (page 66). BLIS: right sensor fault service required amber Have the system checked by a properly trained technician as soon as possible. BLIS: left sensor fault service required amber Have the system checked by a properly trained technician as soon as possible. BLIS not available trailer attached amber See Blind Spot Monitor (page 66). Action Child power lock Message Message indicator Child lock malfunction service required amber Action Have the system checked by a properly trained technician as soon as possible. Climate control Message Indicator Action Auxiliary Heater on amber See Auxiliary Heater (page 102). Auxiliary Heater off - See Auxiliary Heater (page 102). 85 Information Displays Cruise control and Adaptive cruise control (ACC) Message Indicator Action Front radar sensor blocked check handbook amber Forward Alert not available amber ACC not available amber See Adaptive cruise control (ACC) (page 148). Message indicator Action See Adaptive cruise control (ACC) (page 148). See Adaptive cruise control (ACC) (page 148). Doors open Message Driver door open red Stop the vehicle as soon as safely possible and close. Driver side rear door open red Stop the vehicle as soon as safely possible and close. Passenger door open red Stop the vehicle as soon as safely possible and close. Passenger side rear door open red Stop the vehicle as soon as safely possible and close. Luggage compartment lid open red Stop the vehicle as soon as safely possible and close. Bonnet open red Stop the vehicle as soon as safely possible and close. See Opening and Closing the Bonnet (page 190). Driver alert Message Indicator Driver fatigue warning Rest now red Driver fatigue warning Rest suggested amber Action Stop and rest as soon as it is safe to do so. Take a rest break soon. 86 Information Displays Engine immobiliser Message Message indicator Action Immobiliser active check handbook amber Your key has not been recognised. Remove the key and try again. Immobiliser malfunction service required amber Have the system checked by a properly trained technician as soon as possible. Hill start assist Message Hill start assist not available Message indicator amber Action Have the system checked by a properly trained technician. Keyless entry Message Ford KeyFree key not inside car Message indicator Action red See Keyless Entry (page 34). Ford KeyFree key inside vehicle amber See Keyless Entry (page 34). Ford KeyFree Place key in key holder - See Keyless Entry (page 34). Ford KeyFree no key detected - See Keyless Entry (page 34). Key battery low replace soon - See Changing the remote control battery (page 29). Steering lock engaged turn steering wheel - See Steering Wheel Lock (page 114). 87 Information Displays Lane keeping aid Message Lane keeping aid malfunction Service required Indicator amber Action Have the system checked by a properly trained technician as soon as possible. Lighting Message Message indicator Headlamp malfunction service required amber Action Have the system checked by a properly trained technician as soon as possible. Brake lamp bulb fault - One or both of the brake lamp bulbs have blown. Check the brake lamp bulbs. See Changing a Bulb (page 55). Park lamp bulb fault - One or both of the side or tail lamp bulbs have blown. Check the side and tail lamp bulbs. See Changing a Bulb (page 55). Rear fog lamp bulb fault - One or both of the rear fog lamp bulbs have blown. Check the rear fog lamp bulbs. See Changing a Bulb (page 55). Dipped beam bulb fault - One or both of the headlamp dipped beam bulbs have blown. Check the headlamp dipped beam bulbs. See Changing a Bulb (page 55). Trailer brake lamp bulb fault - One or both of the brake lamp bulbs on your trailer have blown. Check the brake lamp bulbs on your trailer. Trailer turn lamp bulb fault - One or both of the direction indicator bulbs on your trailer have blown. Check the direction indicator bulbs on your trailer. 88 Information Displays Maintenance Message indicator Action High engine temperature stop safely red Stop your vehicle as soon as it is safe to do so and switch off the ignition. Have the system checked by a properly trained technician as soon as possible. Brake fluid level low service now red Check the brake fluid level. See Brake and Clutch Fluid Check (page 200). Brake system malfunction stop safely red Stop the vehicle as soon as safely possible. Have the system checked by a properly trained technician immediately. Engine malfunction service now red Stop the vehicle as soon as safely possible and switch off the engine immediately. Have the system checked by a properly trained technician immediately. Message Water detected in fuel service required amber Have the system checked by a properly trained technician as soon as possible. Engine malfunction service now amber Have the system checked by a properly trained technician as soon as possible. Washer fluid level low - Check the washer fluid level. See Washer Fluid Check (page 200). Engine oil change due - Have the system checked by a properly trained technician. Occupant protection Message Service Beltminder Indicator - Action Have the system checked by a properly trained technician as soon as possible. Parking aid Message Indicator Parking aid malfunction Service required amber Action Have the system checked by a properly trained technician as soon as possible. 89 Information Displays Parking brake Message Indicator Action Park brake applied red See Parking Brake (page 132). Park brake applied amber See Parking Brake (page 132). Power steering Message Message indicator Action Steering lock malfunction stop safely red Stop your vehicle as soon as it is safe to do so and switch off the ignition. Have the system checked by a properly trained technician as soon as possible. red Stop your vehicle as soon as it is safe to do so and switch off the ignition. Have the system checked by a properly trained technician as soon as possible. Steering loss stop safely Steering assist malfunction service required amber Power steering. Full steering will be maintained but you will need to exert greater force on the steering wheel. Have the system checked by a properly trained technician as soon as possible. Steering malfunction service now amber Have the system checked by a properly trained technician. Stability control (ESP) Message Traction control off Indicator amber Action See General Information (page 75). Starting the engine Message Ford KeyFree switch ignition off press POWER Message indicator red Action See Keyless Starting (page 116). 90 Information Displays Message Message indicator Drive to clean exhaust filter check handbook amber See Diesel Particulate Filter (page 118). Engine malfunction service now amber See Diesel Particulate Filter (page 118). Press brake to start - See Keyless Starting (page 116). Press clutch to start - See Keyless Starting (page 116). Press brake and clutch to start - See Keyless Starting (page 116). Engine preheating - See Starting a Diesel Engine (page 116). Cleaning exhaust filter - See Diesel Particulate Filter (page 118). Filter cleaning complete - See Diesel Particulate Filter (page 118). Action Start-stop Message Message indicator Action Auto StartStop Switch ignition off red Switch the ignition off before leaving the vehicle if the system has shut down the engine. See Using start-stop (page 120). Auto StartStop malfunction service required amber Have the system checked by a properly trained technician. Auto StartStop Press clutch to start engine - The engine needs to be restarted, press the clutch pedal to start. See Using start-stop (page 120). Auto StartStop Select neutral - Select neutral for the system to restart the engine. See Using start-stop (page 120). Auto StartStop Manual Start required - The system is not functioning. A manual restart is required. 91 Information Displays Transmission Message indicator Action Transmission too hot press brake red Under certain driving conditions it is possible that the clutches in the transmission can overheat. In these circumstances it is necessary to press the brake pedal and stop the vehicle to prevent further overheating. Select N (NEUTRAL) or P (PARK) and apply the foot brake and parking brake until the transmission has cooled and the message disappears from the display. If the vehicle is driven with this message active you may experience vehicle judder as a further overheat warning. Transmission malfunction service now red Have the system checked by a properly trained technician as soon as possible. red The transmission is too hot. In these extreme conditions the transmission will disengage drive in order to prevent damage due to overheating. You will not be able to drive until the transmission has cooled. Select N (NEUTRAL) or P (PARK) and apply the foot brake and parking brake until the transmission has cooled and the message disappears from the display. Transmission too hot press brake amber Under certain driving conditions it is possible that the clutches in the transmission can overheat. In these circumstances it is necessary to press the brake pedal and stop the vehicle to prevent further overheating. Select N (NEUTRAL) or P (PARK) and apply the foot brake and parking brake until the transmission has cooled and the message disappears from the display. If the vehicle is driven with this message active you may experience vehicle judder as a further overheat warning. Transmission limited function check handbook amber Some gears may not be available. Have the system checked by a properly trained technician as soon as possible. - At low outside temperatures, after starting the engine, it may take the transmission several seconds to engage R (REVERSE) or D (DRIVE). Keep the brake pedal depressed until these messages disappear from the display. Message Transmission overheating stop safely Transmission warming up please wait 92 Information Displays Message indicator Action Transmission not in Park select P - See Automatic Transmission (page 129). See Starting and Stopping the Engine (page 114). To start press brake - See Automatic Transmission (page 129). See Starting and Stopping the Engine (page 114). Press brake pedal - See Automatic Transmission (page 129). Message Tyre pressure monitoring system Message Message indicator Action Check tyre pressures amber The pressure in one or more tyres has dropped. Check as soon as possible. Tyre pressure sys malfunction service required amber Permanent malfunction. Have your vehicle checked by a properly trained technician. 93 Climate Control Warming the interior PRINCIPLE OF OPERATION Direct the air towards your feet. In cold or humid weather conditions, direct some of the air towards the windscreen and the door windows. Outside air Keep the air intakes forward of the windscreen free from obstruction (snow, leaves etc.) to allow the climate control system to function effectively. Cooling the interior Direct the air towards your face. Recirculated air AIR VENTS CAUTION Prolonged use of recirculated air may cause the windows to mist up. If the windows mist up, follow the settings for defrosting and demisting the windscreen. Centre air vents The air currently in the passenger compartment will be recirculated. Outside air will not enter the vehicle. Heating Heating performance depends on the temperature of the engine coolant. Air conditioning Note: The air conditioning operates only when the temperature is above 4°C (39°F). Note: If you use the air conditioning, the fuel consumption of your vehicle will be higher. E132995 Air is directed through the evaporator where it is cooled. Humidity is extracted from the air to help keep the windows free of mist. The resulting condensation is directed to the outside of the vehicle and it is therefore normal if you see a small pool of water under your vehicle. General information on controlling the interior climate Fully close all the windows. 94 Climate Control Side air vent MANUAL CLIMATE CONTROL Air distribution control B C D E132996 E A E74660 A Face level B Face level and footwell C Footwell D Footwell and windscreen E Windscreen You can set the air distribution control to any position between the symbols. 95 Climate Control Blower Ventilation A E129885 Set the air distribution control, blower and air vents to suit your requirements. Air conditioning Switching the air conditioning on and off E75470 A Off Note: If you switch the blower off, the windscreen may mist up. If you turn the blower off, the air conditioning will turn off. When you turn the blower on again, the air conditioning will come on automatically. Recirculated air Cooling with outside air E73059 Press the button to toggle between outside air and recirculated air. Heating the interior quickly E129886 Cooling the interior quickly E129884 E129887 96 Climate Control With the heater control in this position, the air conditioning and recirculated air will switch on automatically. If you move the air distribution control to a position other than windscreen, the A/C will remain on. You can switch the air conditioning and recirculated air on and off. You can switch the air conditioning and recirculated air on and off while the air distribution control is set to windscreen Defrosting and demisting the windscreen If necessary, switch the heated windows on. See Heated Windows and Mirrors (page 100). Reducing interior air humidity E129888 When the temperature is above 4°C (39°F), the air conditioning will switch on automatically. Make sure that the blower is on. The indicator in the switch will illuminate during defrosting and demisting. E129889 AUTOMATIC CLIMATE CONTROL E133114 The system in your vehicle is dual-zone automatic climate control. When the system is in mono mode, all the temperature zones are linked to the driver's zone. When you switch mono mode off, the dual-zone system allows you to set different temperatures for the driver's and front passenger's side. The system controls the temperature, amount and distribution of the air flow automatically and adjusts them according to the driving and weather conditions. Pressing the AUTO button once switches on the auto mode. 97 Climate Control To switch mono mode off Note: Avoid adjusting the settings when the vehicle interior is extremely hot or cold. The automatic climate control adjusts to the current circumstances automatically. For the system to function properly, the side and centre vents should be fully open. Select a temperature for the passenger’s side with the rotary control on the passenger’s side. Mono mode will switch off and MONO disappears from the display. The temperature for the driver’s side will remain unchanged. You can now adjust the driver and passenger side temperatures independently of each another. The temperature settings for each side are shown in the display. You can set a temperature difference of up to 4°C (8°F). Note: The sunload sensor is located on top of the instrument panel. Do not cover the sensor with any objects. Note: At low outside temperatures, when the system is in auto mode, the air stream will be directed to the windscreen and the side windows as long as the engine is cold. Note: If you set a temperature difference of greater than 4°C (8°F), the temperature on the other side will be adjusted so that the difference remains 4°C (8°F). Setting the temperature Note: If you set one of the sides to HI or LO, both sides will be set to HI or LO. To switch mono mode back on E133120 To switch mono mode back on, press and hold the AUTO button. MONO reappears in the display and the passenger’s side temperature will be adjusted to the driver’s side temperature. E133115 You can set the temperature between 15.5°C (60°F) and 29.5°C (85°F) in steps of 0.5°C (1°F). In position LO, 15°C (59°F), the system will switch to permanent cooling. In position HI, 30°C (86°F), the system will switch to permanent heating. Blower Note: If either position LO or HI is selected, the system will not regulate a stable temperature. Use the buttons to adjust the blower speed. Mono mode The blower setting is indicated in the display. In mono mode, the temperature settings for both the driver’s and passenger’s side are linked. If you adjust the temperature using the rotary control on the driver’s side, the settings will be adjusted to the same setting on the passenger’s side. In mono mode, MONO appears in the display. To return to auto mode, press the AUTO button. 98 Climate Control Air distribution The blower speed and the temperature control operate automatically and cannot be adjusted manually. The blower is set to high speed and the temperature to HI. To adjust air distribution, press the desired button. Any combination of settings can be selected simultaneously. A B When you select windscreen defrosting and demisting, the heated screens switch on automatically and switch off after a short time. To return to auto mode, press the AUTO button. C Switching the air conditioning on and off E70308 A Footwell B Face level C Windscreen E91393 Press the A/C button to switch the air conditioning on and off. A/C OFF appears in the display when the air conditioning is switched off. When you select windscreen defrosting and demisting, A, B and C switch off automatically and the air conditioning switches on. Outside air will flow into the vehicle. You cannot select recirculated air. A/C ON appears in the display when the air conditioning is switched on. Cooling the interior quickly Recirculated air Press the recirculated air button to toggle between outside air and recirculated air. E133122 Note: When the system is in auto mode and the interior and exterior temperatures are quite hot, the system selects recirculated air automatically to maximise cooling of the interior. Once the selected temperature is reached, the system will reselect outside air automatically. Windscreen defrosting and demisting E91392 Press the windscreen defrosting and demisting button. Outside air will flow into the vehicle. Air conditioning is automatically selected. As long as the air distribution is set to this position, you cannot select recirculated air. Switching off the automatic climate control E133093 Press the button. 99 Climate Control When switched off, the heating, ventilation and air conditioning system is switched off and recirculated air is selected. ELECTRIC SUNROOF WARNING Before operating the electric sunroof you should verify it is free of obstructions and ensure that children and/or pets are not in the proximity of the sunroof opening. Failure to do so could result in serious personal injury. It is the primary responsibility of the supervising adults to never leave a child unattended in a vehicle and to never leave the keys in an unattended vehicle. HEATED WINDOWS AND MIRRORS Heated windows Use the heated windows to defrost or demist the windscreen or rear window. Note: The heated windows operate only when the engine is running. Heated windscreen Note: When the switches are operated often during a short period of time, the system might become inoperable for a certain time to prevent damage due to overheating. E72506 Heated rear window Note: The electric sunroof can also be operated with the ignition off via the global opening and global closing function. See Global Opening and Closing (page 36). E72507 There are two ways of opening the sunroof – the rear of the sunroof lifts open or the sunroof opens from the front, sliding back under the roof. The sunroof opens and closes whilst the switch is pressed. Vehicles without auxiliary heater If the ambient temperature is below 5°C (41°F) and the engine coolant is below 65°C (149°F), the heated windscreen and heated rear window will switch on automatically. They will switch off automatically. Switch on the ignition to operate the electric sunroof. The power sunroof is operated by a switch located between the sun visors. Heated exterior mirrors Electric exterior mirrors are fitted with a heating element that will defrost or demist the mirror glass. They will switch on automatically when you switch the heated rear window on. 100 Climate Control Opening and closing the sunroof To open or close the sunroof automatically press either side of the switch to the second action point and release it completely. Press again to stop. When the closed position is reached, the sunroof stops automatically. Sunroof anti-trap protection WARNINGS The anti-trap function is deactivated until the memory has been reset. Careless closing of the window can cause injuries. Careless closing of the electric sunroof can override the anti-trap protection and cause injuries. E72188 Tilting the sunroof The sunroof will stop automatically while closing and reverse some distance if there is an obstacle in the way. To override anti-trap protection when there is a resistance, e. g. in the winter, proceed as follows: WARNING While the sunroof is being closed for the third time, the anti-trap function is disabled. Make sure there are no obstacles in the way of the closing sunroof. Close the sunroof a third time to the resistance. The anti-trap function is disabled and the sunroof cannot be closed automatically. The sunroof will override the resistance and can then be closed fully. E72189 Opening and closing the sunroof automatically Note: When opening automatically, the sunroof will stop about 8 cm from the fully opened position. This position reduces the buffeting noise which is sometimes heard when the sunroof is fully open. The sunroof will only stop automatically in this position when the sunroof is opened automatically. If the sunroof does not close after the third attempt, have it checked by an expert. 101 Climate Control Sunroof safety mode AUXILIARY HEATER WARNING Parking heater The anti-trap function is not active during this procedure. Make sure that there are no obstacles in the way of the closing sunroof. WARNINGS The parking heater must not be operated at filling stations, near sources of combustible vapours or dust or in enclosed spaces. If the system detects a malfunction, it enters a safety mode. The sunroof will move for only about 0.5 seconds at a time and then stop again. Close the sunroof by pressing the button again when the sunroof stops moving. When the rear of the sunroof is lifted, lift the rear all the way and then close the sunroof. Have the system checked by an expert immediately. The parking heater should be switched on for approximately 10 minutes at least once a month all year round. This prevents the water pump and heater motor from seizing. Note: The parking heater will only operate if there is at least 7.5 litres (1.6 gallons) of fuel in the fuel tank and the ambient temperature is below 15°C (59°F). The heater will not operate if the battery is low. Sunroof relearning WARNING The anti-trap function is not active during this procedure. Make sure that there are no obstacles in the way of the closing sunroof. Note: The heating depends on the outside air temperature. In case the sunroof no longer closes properly, follow this relearning procedure: Note: On vehicles with manual climate control the heating of the vehicle interior is dependent on the temperature, air distribution and blower control settings. • • • Note: When the parking heater is activated, exhaust fumes may come from under the sides of the vehicle. This is normal. Tilt the rear of the sunroof as far as possible. Release the button. Press and hold the same button again for 30 seconds until you see the sunroof move. Release the button and immediately press and hold it again. The sunroof will close, open fully and then close again. Do not release the button before the sunroof has reached the closed position for the second time. The parking heater operates independently of the vehicle heater by heating the engine’s coolant circuit. It is fed from the vehicle fuel tank. You can also use it while the vehicle is in motion to help the vehicle heater warm up the interior more quickly. Used properly, the parking heater provides the following benefits: If the button is not pressed continuously, the relearning function will be interrupted. Start the procedure once more from the beginning. 102 Climate Control • • • It preheats the interior of the vehicle. It keeps the windows clear of ice in the event of frost and prevents condensation. It avoids cold starts and allows the engine to reach operating temperature sooner. Park Heater Program 1 Program 2 Once Heat now To prevent the battery from discharging: • • Once the parking heater has performed one heating cycle, the next programmed heating cycle will only be carried out if you have started the vehicle’s engine in between. After a heating cycle, drive the vehicle for at least the period of the heating cycle. E136301 • Programming the parking heater Note: The programmed time is the time at which you wish the vehicle to be warm and ready to drive, not the time at which the heater switches on. • The two time functions allow you to programme up to two heating cycles for each day of the week. These times will remain stored and the heater will warm up the vehicle at these times on these days every week. The function once allows you to programme one heating cycle for one specific day. The function Heat now automatically switches on the heater. Note: You must programme the times at least 70 minutes in advance of the time you wish to set. • Note: You must set the time and date correctly. See Clock (page 111). Programming the functions Program 1 and Program 2 To programme the heating times: 1. Use the arrow buttons on the steering wheel to enter the main menu. See Information Displays (page 75). 2. Select the park heater option. Program 1 [07:55] Monday Tuesday Wednesday Thursday Friday E74468 103 Climate Control 1. 2. 3. 4. 5. 6. 7. Fuel operated heater (depending on country) Use the arrow buttons on the steering wheel to enter the main menu. Select the first programme time list. Highlight the day on which the heater should warm up the vehicle. Press the OK button. Continue in the same way to select all the days on which the heater should warm up the vehicle. To set the time at which the vehicle should be warmed up, highlight the time at the top of the display and press the OK button. The hours start to flash. Adjust the hours and minutes as necessary. WARNING The fuel operated heater must not be operated at filling stations, near sources of combustible vapours or dust or in enclosed spaces. The fuel operated heater aids in warming the engine and the vehicle interior on vehicles with a diesel engine. It is switched on or off automatically depending on the outside air temperature and the coolant temperature, unless you have deactivated it. To deactivate the fuel operated heater: You can use the second programme time list to set a second cycle, for example different times on different days or twice on the same day. The programming procedure is the same as for the first programme timer.. 1. Highlight Aux. Heater and press the OK button. A cross appears in the box when the heater is activated. Diesel auxiliary heater (depending on country) Deactivating the programmed heater The diesel auxiliary heater (PTC electrical heater) aids in warming the engine and the vehicle interior on vehicles with a diesel engine. It is switched on or off automatically depending on the outside air temperature, the coolant temperature and the alternator load. 1. Use the arrow buttons on the steering wheel to enter the main menu. 2. Uncheck the active program session. Programming the heater for a single cycle 1. Select Once and press the right arrow button. 2. Press the OK button and set the required time and date. 3. Press OK to confirm the set time and date. Activating the heater manually Highlight Heat now and press the OK button. A cross appears in the box when the heater is activated. To deactivate the heater, uncheck the Heat now function. 104 Seats • SITTING IN THE CORRECT POSITION • bend your legs slightly so that you can press the pedals fully. position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle. MANUAL SEATS Moving the seats backwards and forwards E68595 WARNINGS Do not adjust the seats when the vehicle is moving. Only when you use the seat belt properly, can it hold you in a position that allows the airbag to achieve its optimum effect. When you use them properly, the seat, head restraint, seat belt and airbags will provide optimum protection in the event of a collision. We recommend that you: • • • • • sit in an upright position with the base of your spine as far back as possible. do not recline the seatback more than 30 degrees. adjust the head restraint so that the top of it is level with the top of your head and as far forwards as possible, remaining comfortable. keep sufficient distance between yourself and the steering wheel. We recommend a minimum of 250 millimetres (10 inches) between your breastbone and the airbag cover. hold the steering wheel with your arms slightly bent. E130249 WARNING Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch. 105 Seats Adjusting the lumbar support Adjusting the angle of the seatback E78058 E130250 Adjusting the height of the driver’s seat HEAD RESTRAINTS Adjusting the head restraint WARNINGS Raise the rear head restraint when the rear seat is occupied by a passenger. When using a forward facing child restraint on a rear seat, always remove the head restraint from that seat. E70730 E66539 106 Seats E135437 E135401 Adjust the head restraint so that the top of it is level with the top of your head. Removing the head restraint Press the locking buttons and remove the head restraint. 107 Seats POWER SEATS E78060 108 Seats REAR SEATS WARNINGS When folding the seatbacks down, take care not to get your fingers caught between the seatback and seat frame. 3 Make sure that the seats and the seatbacks are secure and fully engaged in their catches. E135628 Folding the rear seatbacks forwards CAUTION Lower the head restraints. See Head Restraints (page 106). Note: Make sure that the seat belt is fully tightened into the retractor. 3. Place the seat belts in the clips on the outboard trim. 1 1 Folding the seat cushions and the rear seatbacks forwards WARNING Make sure the red indicator is not showing when you engage the seat in the catches. 2 CAUTIONS Lower the head restraints. See Head Restraints (page 106). E135629 1. Press and hold the unlock buttons. 2. Push the seatback forwards. When inserting your fingers between the seat cushion and seatback, take care not to get your fingers caught on the ISOFIX anchor points and bracket. See ISOFIX Anchor Points (page 21). 109 Seats Folding the seatbacks up 2 WARNING 2 1 When folding the seatbacks up, make sure that the belts are visible to an occupant and not caught behind the seat. 3 HEATED SEATS CAUTION Operating this function with the engine off will drain the battery. E135646 Note: Hold the cushion edge to avoid the ISOFIX anchor points and brackets. 1. Insert your fingers between the seat cushion and seatback and fold the seat cushion forwards. 2. Press and hold the unlock buttons. 3. Push the seatback forwards. E130471 4 The maximum temperature is reached after five or six minutes. It is regulated thermostatically. The seat heating will operate only when the ignition is on. E135647 Note: Make sure that the seat belt is fully tightened into the retractor. 4. Place the seat belts in the clips on the outboard trim. 110 Convenience features INSTRUMENT LIGHTING DIMMER E132415 Press the element in to use the cigar lighter. It will pop out automatically. E132712 AUXILIARY POWER POINTS Press repeatedly or press and hold until the desired level is reached. CAUTION Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer will set the illuminated components to the maximum setting automatically. If you use the socket when the engine is not running, the battery may discharge. CLOCK Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 10 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets. See Information Displays (page 75). CIGAR LIGHTER CAUTIONS If you use the socket when the engine is not running, the battery may discharge. Do not hold the cigar lighter element pressed in. E78056 Auxiliary power sockets are located in the centre console and in the luggage compartment. Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 10 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets. 111 Convenience features CUP HOLDERS WARNING Do not place hot drinks in the cup holders when the vehicle is moving. Rear seat armrest E91508 CHILDMINDER MIRROR E132505 GLASSES HOLDER E75192 E75193 112 Convenience features SATELLITE NAVIGATION UNIT HOLDER AUXILIARY INPUT (AUX IN) SOCKET Adjusting the holder 1 3 2 E132422 See Auxiliary input (AUX IN) socket (page 243). USB PORT E112711 1. Unlock. 2. Adjust the holder to the desired position. 3. Lock. Note: Make sure that the navigation unit holder is locked in position. FLOOR MATS WARNING When using the floor mats, always make sure the floor mat is properly secured using the appropriate fixings and positioned so that it does not interfere with the operation of the pedals. E132423 See Connectivity (page 265). 113 Starting and Stopping the Engine II The ignition is switched on. All electrical circuits are operational. Warning lamps and indicators illuminate. This is the key position when driving. You must also select it when being towed. GENERAL INFORMATION General points on starting If the battery has been disconnected the vehicle may exhibit some unusual driving characteristics for approx. 8 kilometres (5 miles) after reconnecting the battery. III The starter motor is activated. Release the key as soon as the engine starts. This is because the engine management system must realign itself with the engine. Any unusual driving characteristics during this period may be disregarded. STEERING WHEEL LOCK WARNING Always check that the steering is unlocked before attempting to move your vehicle. Starting the engine by towing or pushing WARNING Vehicles without keyless starting To prevent damage you must not push or tow start your vehicle. Use booster cables and a booster battery. See Jump-Starting the Vehicle (page 206). To activate the steering wheel lock; 1. Remove the key from the ignition switch. 2. Turn the steering wheel. IGNITION SWITCH Vehicles with keyless starting Note: The steering wheel lock will not activate when the ignition is on or the vehicle is moving. WARNING Never return the key to position 0 or I when the vehicle is in motion. Your vehicle has an electronically controlled steering wheel lock. This operates automatically. The steering wheel lock will activate after a short period of time once you have parked your vehicle and the passive key is outside of the vehicle, or when you lock the vehicle. See Keyless Entry (page 34). Deactivating the steering wheel lock E72128 Switch the ignition on, or: 0 The ignition is off. Vehicles with automatic transmission • Press the brake pedal. I The ignition and all main electrical circuits are disabled. Vehicles with manual transmission • Press the clutch pedal. Note: Do not leave the ignition key in this position for too long to avoid discharging the battery. 114 Starting and Stopping the Engine STARTING A PETROL ENGINE Flooded engine Note: You can only operate the starter for a maximum of 30 seconds at a time. Vehicles with manual transmission 1. Fully depress the clutch pedal. 2. Fully depress the accelerator pedal and hold it there. 3. Start the engine. Cold or hot engine All vehicles CAUTION Vehicles with automatic transmission When the temperature is below -20°C (-4°F), switch the ignition on for at least one second before starting the engine. This will make sure that the maximum fuel pressure is established for starting the engine. 1. Select park or neutral. 2. Fully depress the accelerator pedal and hold it there. 3. Fully depress the brake pedal. 4. Start the engine. Vehicles with manual transmission All vehicles Note: Do not touch the accelerator pedal. If the engine does not start, repeat the Cold or hot engine procedure. 1. Fully depress the clutch pedal. 2. Start the engine. Engine idle speed after starting The speed at which the engine idles immediately after starting will vary depending on the engine temperature. Vehicles with automatic transmission Note: Do not touch the accelerator pedal. 1. Select park or neutral. 2. Fully depress the brake pedal. 3. Start the engine. If the engine is cold then the idle speed will automatically be increased in order to heat the catalytic converter as quickly as possible. This makes sure that vehicle emissions are kept to an absolute minimum. All vehicles If the engine does not start within 15 seconds, wait for a short period and try again. The idle speed will slowly decrease to the normal level as the catalytic converter warms up. If the engine does not start after three attempts, wait 10 seconds and follow the Flooded engine procedure. STARTING A PETROL ENGINE - E85 If you have difficulty starting the engine when the temperature is below -25°C (-13°F), press the accelerator pedal between ¼ to ½ of its travel and try again. For general information on starting a petrol engine. See Starting a Petrol Engine (page 115). 115 Starting and Stopping the Engine Starting at low ambient temperatures If the battery has been disconnected or after the fuel type has been changed, the idle speed may be irregular. This will improve after 10 to 30 seconds. When the temperature is lower than -10°C (14°F) and the vehicle is filled with E85, an engine block heater should be used to facilitate starting. See Engine Block Heater (page 119). Failure to do this will result in a non start. STARTING A DIESEL ENGINE Cold or hot engine If the temperature is expected to remain below -10°C (14°F), it is recommended that you increase the proportion of petrol in the tank by topping up with 95 octane unleaded petrol if the tank is not already full. About 10 litres (2.2 gallons) of petrol will reduce the proportion of E85 in a ¾ full tank from 85% to 70% and will considerably improve cold start capability. All vehicles Note: When the temperature is below -15°C (5°F), you may need to crank the engine for up to 25 seconds. Note: Continue cranking the engine until it starts. Note: You can only operate the starter for a maximum of 30 seconds at a time. If, at very low temperatures, the tank is filled with only E85 and there is no way to use an engine block heater, you may experience difficulties starting the engine. Switch the ignition on and wait until the glow plug indicator goes off. If the engine fails to start, proceed as follows: Vehicles with manual transmission Note: Do not touch the accelerator pedal. 1. Fully depress the accelerator pedal. 2. Turn the ignition key to position III. 1. Fully depress the clutch pedal. 2. Start the engine. CAUTION Release the ignition key as soon as the engine has started. Vehicles with automatic transmission 1. Select park or neutral. 2. Fully depress the brake pedal. 3. Start the engine. 3. Gradually release the accelerator pedal after five seconds of engine cranking or as the engine speed rises. If the engine fails to start, repeat steps 1, 2 and 3, or connect an engine block heater for two hours before attempting another start. KEYLESS STARTING WARNINGS The keyless starting system may not function if the key is close to metal objects or electronic devices such as mobile phones. During starting, the fuel injectors are turned off as long as the accelerator pedal is depressed. This can be used to drain excessive fuel from the intake manifold after several unsuccessful starting attempts. 116 Starting and Stopping the Engine Starting with manual transmission WARNINGS Always check that the steering wheel lock is deactivated before attempting to move your vehicle. See Steering Wheel Lock (page 114). Note: Releasing the clutch pedal during engine start will stop the engine cranking and return to ignition on. 1. Fully depress the clutch pedal. 2. Press the start button. Note: The ignition may automatically switch off after a period of time if your vehicle has been left unattended with the ignition on. This is to prevent the vehicle battery from discharging. Starting a diesel engine Note: Engine cranking may not commence until the engine glow plug cycle has been completed. This may take several seconds in extremely cold conditions. Note: A valid passive key must be located inside the vehicle to switch the ignition on and start the engine. Note: Continue to press the clutch or brake pedal until engine cranking begins. Note: To start your engine you must also fully depress the brake or clutch pedal, depending on the transmission fitted. Failure to start The passive starting system will not function if: • The passive key frequencies are jammed. • The passive key battery is flat. If you are unable to start your vehicle carry out the following procedure. E85766 Ignition on Press the start button once. All electrical circuits are operational, warning lamps and indicators illuminate. Starting with automatic transmission Note: Releasing the brake pedal during engine start may stop the engine cranking and return to ignition on. 1. Make sure the transmission is in P or N. 2. Fully depress the brake pedal. 3. Press the start button. E87381 1. 117 Carefully prise out the cover. Starting and Stopping the Engine Press and hold the start button for two seconds, or press twice within two seconds. DIESEL PARTICULATE FILTER The DPF forms part of the emissions reduction systems fitted to your vehicle. It filters harmful diesel particulates (soot) from the exhaust gas. Regeneration WARNING E85767 Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The DPF regeneration process creates very high exhaust gas temperatures and the exhaust will radiate a considerable amount of heat during and after DPF regeneration, and after you have switched the engine off. This is a potential fire hazard. 2. Insert the key into the key holder. 3. With the key in this position you can use the start button to switch the ignition on and start your vehicle. Stopping the engine with the vehicle stationary Note: The ignition, all electrical circuits, warning lamps and indicators will be switched off. CAUTION Avoid running out of fuel. Manual transmission Press the start button. Note: During regeneration at low speed or engine idle, you may smell a hot metallic odour and could notice a clicking metallic sound. This is due to the high temperatures reached during regeneration and is normal. Automatic transmission 1. Move the selector lever to position P. 2. Press the start button. Stopping the engine when the vehicle is moving Note: After you have switched your engine off the fans may continue to run for a short period of time. WARNING Unlike a normal filter which requires periodic replacement, the DPF has been designed to regenerate, or clean itself to maintain operating efficiency. The regeneration process takes place automatically. However, some driving conditions mean that you may need to support the regeneration process. Switching off the engine when the vehicle is still moving will result in a loss of brake and steering assistance. The steering will not be locked, but higher effort will be required. When the ignition is switched off some electrical circuits, warning lamps and indicators may also be OFF. 118 Starting and Stopping the Engine If you drive only short distances or your journeys contain frequent stopping and starting, where there is increased acceleration and deceleration, occasional trips with the following conditions will assist the regeneration process: • • • • Drive your vehicle at a constant speed, preferably on a main road or motorway, for up to 20 minutes. Avoid prolonged idling and always observe speed limits and road conditions. Do not switch off the ignition. Use a lower gear than normal to maintain a higher engine speed during this journey, where appropriate. E135813 Connect the engine heater for two to three hours before starting the engine. SWITCHING OFF THE ENGINE Vehicles with a turbocharger CAUTION Do not switch the engine off when it is running at high speed. If you do, the turbocharger will continue running after the engine oil pressure has dropped to zero. This will lead to premature turbocharger bearing wear. Release the accelerator pedal. Wait until the engine has reached idle speed and then switch it off. ENGINE BLOCK HEATER CAUTION Make sure you disconnect the power cable from the engine heater connector before driving away. Note: The engine heater connector is located in the front bumper. 119 Start-Stop Note: If you stall the engine, and then depress the clutch pedal within a couple of seconds, the system will automatically restart the engine. PRINCIPLE OF OPERATION CAUTION For vehicles with Start-stop the battery requirement is different. It must be replaced by one of exactly the same specification as the original. Note: The Start-stop indicator will illuminate green when the engine shuts down. See Warning Lamps and Indicators (page 71). Note: The Start-stop indicator will flash amber, requiring you to select neutral or depress the clutch pedal. In conjunction a message will be shown in the display. The system reduces fuel consumption and CO2 emissions by shutting down the engine when the vehicle is idling, for example at traffic lights. The engine will automatically restart when the driver presses the clutch pedal or when required by a vehicle system, for example to recharge the battery. Note: If the system detects a malfunction, it is deactivated. Have the system checked by a properly trained technician. Note: If you have switched the system off, the switch will be illuminated. To obtain maximum benefit from the system, move the gear lever to the neutral position and release the clutch pedal during any stop of longer than three seconds. Note: The system is on by default. To switch the system off, press the switch in the instrument panel. The system will only be de-activated for the current ignition cycle. To turn it on, press the switch again. For item location. See At a Glance (page 10). USING START-STOP WARNINGS The engine may restart automatically if required by the system. See Principle of Operation (page 120). To stop the engine Switch the ignition off before opening the bonnet or carrying out any maintenance. 1. Stop the vehicle. 2. Move the gear lever to the neutral position. 3. Release the clutch pedal. 4. Release the accelerator pedal. Always switch the ignition off before leaving your vehicle, as the system may have shut down the engine but the ignition will still be live. The system may not shut down the engine under certain conditions, for example: Note: The system only operates when the engine is warm and the outside temperature is between 0°C (32°F) and 30°C (86°F). • • • • 120 To maintain the interior climate. Low battery voltage. The outside temperature is too low or too high. The driver's door has been opened. Start-Stop • • • Low engine operating temperature. Low brake system vacuum. If a road speed of 5 km/h (3 mph) has not been exceeded. To re-start the engine Note: The gear lever must be in the neutral position. Depress the clutch pedal. The system may automatically restart the engine under certain conditions, for example: • • Low battery voltage. To maintain the interior climate. 121 Eco Mode Anticipation PRINCIPLE OF OPERATION Adjusting your vehicle speed and the distance to other vehicles without the need for heavy braking or acceleration will improve fuel consumption. The system assists the driver to drive more efficiently by constantly monitoring characteristics of gear changing, anticipation of traffic conditions and speeds on motorways and open roads. Efficient speed Note: These efficiency values do not result in a defined fuel consumption figure. It might vary as it is not only related to these driving disciplines but also influenced by many other factors such as short journeys and cold starts. Higher speeds use more fuel. Reducing your cruising speed on open roads will improve fuel consumption. Type 2 and 3 The relevant information will be shown in the display. Note: Frequent short journeys, where the engine does not fully warm up, will also increase fuel consumption. USING ECO MODE The value of these characteristics is represented by petals shown in the display, with five petals being the most efficient. The more efficiently you drive, the better the rating, and the better your overall fuel consumption. The system is accessed using the relevant information display menu. See Information Displays (page 75). Resetting Eco mode Type 1 Reset the average fuel consumption. Note: New values may take a short time to calculate. E121813 A B A Gear shifting B Anticipation C Efficient speed C Gear shifting Using the highest drivable gear appropriate for the road conditions will improve fuel consumption. 122 Fuel and Refuelling SAFETY PRECAUTIONS CAUTIONS Do not use leaded petrol or petrol with additives containing other metallic compounds (e.g. manganese-based). They could damage the emission system. WARNINGS Stop refuelling after the fuel nozzle stops the second time. Additional fuel will fill the expansion space in the fuel tank which could lead to fuel overflowing. Fuel spillage could be hazardous to other road users. Do not use methanol instead of E85. Note: We recommend that you use only high quality fuel without additives or other engine treatments. Do not use any kind of flames or heat near the fuel system. The fuel system is under pressure. There is a risk of injury if the fuel system is leaking. Note: When using E85, you may experience a higher fuel consumption. CAUTION Note: Your vehicle will operate well on commercial quality 95 octane unleaded petrol, but only high quality E85 offers the same protection and performance. Do not use leaded petrol or petrol with additives containing other metallic compounds (e.g. manganese-based). They could damage the emission system. Use minimum 95 octane unleaded petrol that meets the specification defined by EN 228, or equivalent. You can also use a mixture of unleaded petrol and E85. Note: We recommend that you use only high quality fuel without additives or other engine treatments. Long-term storage FUEL QUALITY - PETROL Use minimum 95 octane unleaded petrol that meets the specification defined by EN 228, or equivalent. Due to small amounts of corrosive impurities that may be found in the E85, it is recommended that you fill the tank with only 95 octane unleaded petrol prior to long-term storage of your vehicle. FUEL QUALITY - E85 FUEL QUALITY - DIESEL WARNING WARNINGS Do not modify the fuel system configuration or the components in the system. Do not mix diesel with oil, petrol or other liquids. This could cause a chemical reaction. Do not replace the fuel system or the components with parts not specially designed to be used with E85. CAUTIONS Do not add kerosene, paraffin or petrol to diesel. This could cause damage to the fuel system. 123 Fuel and Refuelling CAUTIONS Use diesel that meets the specification defined by EN 590, or the relevant national specification. CAUTIONS Do not push-start or tow-start your vehicle. Use booster cables. See Jump-Starting the Vehicle (page 206). Note: We recommend that you use only high quality fuel. Do not switch the ignition off when driving. Note: The use of additives or other engine treatments not approved by Ford is not recommended. FUEL FILLER FLAP Note: We do not recommend the prolonged use of additives intended to prevent fuel waxing. WARNINGS Take care when refuelling to avoid spilling any residual fuel from the fuel nozzle. Long-term storage Do not use any kind of flames or heat near the fuel system. The fuel system is under pressure. There is a risk of injury if the fuel system is leaking. Most diesel fuels contain bio-diesel, it is recommended to fill the tank with purely mineral diesel (where available) or add an anti-oxidant prior to long-term storage of your vehicle exceeding two months. Your dealer can help you with a suitable anti-oxidant. CAUTION If you use a high pressure spray to wash your vehicle, only spray the fuel filler flap briefly from a distance not less than 200 millimetres (8 inches). CATALYTIC CONVERTER WARNING Type 1 Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The exhaust will radiate a considerable amount of heat during use, and after you have switched the engine off. This is a potential fire hazard. Driving with a catalytic converter CAUTIONS Avoid running out of fuel. Do not crank the engine for long periods. E135934 Do not run the engine when a spark plug lead is disconnected. 124 Fuel and Refuelling 2. Insert the fuel nozzle up to and including the first notch on the nozzle A. Keep it resting on the cover of the fuel pipe opening. Type 2 WARNING Stop refuelling after the fuel nozzle stops the second time. Additional fuel will fill the expansion space in the fuel tank which could lead to fuel overflowing. Fuel spillage could be hazardous to other road users. A E135935 1. Press the flap to open it. Open the flap fully until it engages. A B E139203 A A Incorrect position B Correct position 3. Do not lift the nozzle during refilling. This can affect the flow of fuel and shut off of the fuel nozzle before the fuel tank is full. E139202 Note: When you insert the fuel nozzle, a spring loaded inhibitor will open if the correct size nozzle is detected. This helps to avoid filling up with the wrong fuel. 125 Fuel and Refuelling Type 1 E119081 5. Slightly raise the fuel nozzle to remove it. E139204 Refuelling with a fuel can Type 2 Use the funnel which is located in the glove box. REFUELLING CAUTION Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immediately. REFUELLING - E85 E139205 CAUTION 4. Operate the nozzle within the area shown. Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immediately. WARNINGS We recommend that you remove the fuel nozzle slowly to allow any residual fuel to drain into the fuel tank. Alternatively you can wait 10 seconds before removing the fuel nozzle. After refuelling, allow 5 minutes of normal engine operation above 48 km/h (30 mph) to reduce the risk of an increased engine restart time. Do not remove the nozzle from its fully inserted position during the entire refuelling process. 126 Fuel and Refuelling They are intended as a comparison between makes and models of vehicles. They are not intended to represent the real world fuel consumption you may get from your vehicle. Real world fuel consumption is governed by many factors including; driving style, high speed driving, stop/start driving, air conditioning usage, the accessories fitted and towing etc. FUEL CONSUMPTION The CO2 and fuel consumption figures are derived from laboratory tests according to EEC Directive 80/1268/EEC and subsequent amendments and are carried out by all vehicle manufacturers. Your Ford dealer can give you advice on improving your fuel consumption. TECHNICAL SPECIFICATIONS Focus Fuel Consumption Figures Urban Extra-Urban Combined CO2 Emissions l/100 km (mpg) l/100 km (mpg) l/100 km (mpg) g/km 1.6L Duratec-16V Ti-VCT Sigma Stage V, 5-door, all except vehicles with DPS6 automatic transmission 8 (35.3) 4.7 (60.1) 5.9 (47.9) 136 1.6L Duratec-16V Ti-VCT Sigma Stage V, 4-door and estate, all except vehicles with DPS6 automatic transmission 8.1 (34.9) 4.8 (58.9) 6 (47.1) 139 1.6L Duratec-16V Ti-VCT Sigma Stage V, vehicles with DPS6 automatic transmission 9.3 (30.4) 4.8 (58.9) 6.4 (44.1) 149 1.6L EcoBoost - Sigma Stage V, vehicles without start-stop 8.3 (34) 5 (56.5) 6.2 (45.6) 144 1.6L EcoBoost - Sigma Stage V, vehicles with startstop 7.7 (36.7) 5 (56.5) 6 (47.1) 139 Variant 127 Fuel and Refuelling Urban Extra-Urban Combined CO2 Emissions l/100 km (mpg) l/100 km (mpg) l/100 km (mpg) g/km 9.6 (29.4) 5 (56.5) 6.7 (42.2) 149 9.1 (31) 4.9 (57.6) 6.4 (44.1) 156 1.6L Duratorq-TDCi - DV Stage V, vehicles without start-stop 5.7 (49.6) 3.7 (76.3) 4.5 (62.8) 117 1.6L Duratorq-TDCi - DV Stage V, vehicles with startstop 5.1 (55.4) 3.7 (76.3) 4.2 (67.3) 109 2.0L Duratorq-TDCi - DW Stage V, vehicles with manual transmission 6.3 (44.8) 4.2 (67.3) 5 (56.5) 129 2.0L Duratorq-TDCi - DW Stage V, vehicles with automatic transmission 6.8 (41.5) 4.4 (64.2) 5.3 (53.3) 139 Variant 2.0L Duratec-HE - MI4 Stage V, vehicles with manual transmission 2.0L Duratec-HE - MI4 Stage V, vehicles with automatic transmission 128 Transmission MANUAL TRANSMISSION AUTOMATIC TRANSMISSION Selecting reverse gear Selector lever positions CAUTION Do not engage reverse gear when the vehicle is moving. This can cause damage to the transmission. E133124 E99067 On some vehicles it is necessary to raise the collar whilst selecting reverse gear. Vehicles with 5-speed transmission CAUTION Fully depress the clutch pedal and wait for three seconds before you select reverse gear. P Park R Reverse N Neutral D Drive S Sport mode and manual shifting + Manual shift up - Manual shift down WARNING Apply the brakes before moving the selector lever and keep them applied until you are ready to move off. Press the button on the selector lever to change to each position. The selector lever position will be shown in the information display. Park WARNINGS Select park only when your vehicle is stationary. 129 Transmission WARNINGS Apply the parking brake and select park before leaving your vehicle. Make sure that the selector lever is latched in position. The transmission will select the appropriate gear for optimum performance based on ambient temperature, road gradient, vehicle load and driver input. Note: An audible warning will sound if you open the driver's door and you have not selected park. Sport Mode Sport mode and manual shifting Note: In Sport mode the transmission operates as normal but gears are selected more quickly and at higher engine speeds. In this position, power is not transmitted to the drive wheels and the transmission is locked. You can start the engine with the selector lever in this position. Note: In Sport mode S will be displayed on the instrument panel. Activate Sport mode by moving the selector lever to position S. Sport mode will remain active until either you shift manually up or down the gears using + and -, or return the selector lever to position D. Reverse WARNINGS Select reverse only when your vehicle is stationary and the engine is at idle speed. Manual shifting Always come to a complete stop before shifting out of reverse. WARNING Do not hold the buttons permanently in – or +. Select reverse to allow the vehicle to move backwards. CAUTION Neutral The transmission will automatically downshift when the engine speed is too low. In this position, power is not transmitted to the drive wheels but the transmission is not locked. You can start the engine with the selector lever in this position. Press the - button to shift down and press the + button to shift up. Drive Gears may be skipped by pressing the buttons repeatedly at short intervals. Note: A shift will occur only when the vehicle speed and the engine speed are appropriate. Manual mode also provides a kickdown function. See Kickdown. Note: You may temporarily override the current gear selected using the + and buttons. Hints on driving with an automatic transmission Select drive to shift automatically through the forward gears. CAUTION Do not idle the engine for long periods of time in drive with the brakes applied. 130 Transmission Moving off 1. Release the parking brake. 2. Release the brake pedal and press the accelerator pedal. 4 Stopping 1. Release the accelerator pedal and press the brake pedal. 2. Apply the parking brake. 3. Select neutral or park. E133129 Note: The lever is white. Kickdown 4. Apply the brake pedal. Using a suitable tool press and hold the lever forward while pulling the selector lever out of the park position and into the neutral position. Press the accelerator pedal fully with the selector lever in the drive position to select the next lowest gear for optimum performance. Release the accelerator pedal when you no longer require kickdown. Emergency park position release lever Use the lever to move the selector lever from the park position in the event of an electrical malfunction or if your vehicle has a flat battery. E133128 3 2 1 1. Carefully remove the cover. 2. Remove the retaining clip. 3. Remove the centre console side panel. 131 Brakes • • PRINCIPLE OF OPERATION Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the brake lamps may flash if you brake heavily. you take corners too fast. the road surface is poor. PARKING BRAKE WARNING Note: Occasional brake noise is normal and often does not indicate a concern. In normal operation, the system may emit occasional or intermittent squeal or groan noises when the brakes are applied. Such noises are usually caused by environmental conditions such as cold, heat, moisture, road dust, salt or mud. Vehicles with an automatic transmission should always be left with the selector lever in position P (Park). • • Disc brakes • Wet brake discs result in reduced braking efficiency. Dab the brake pedal when driving from a car wash to remove the film of water. • ABS • WARNING The ABS does not relieve you of your responsibility to drive with due care and attention. Press the foot brake pedal firmly. Pull the parking brake lever up smartly to its fullest extent. Do not press the release button while pulling the lever up. If your vehicle is parked on a hill and facing uphill, select first gear or P (Park) and turn the steering wheel away from the kerb. If your vehicle is parked on a hill and facing downhill, select reverse gear or P (Park) and turn the steering wheel towards the kerb. To release the parking brake, press the brake pedal firmly, pull the lever up slightly, depress the release button and push the lever down. The ABS helps you to maintain full steering and directional stability when you brake heavily in an emergency, by preventing the road wheels from locking. HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the ABS is operating, the brake pedal will pulse. This is normal. Maintain pressure on the brake pedal. The ABS will not eliminate the dangers inherent when: • you drive too close to the vehicle in front of you. • the vehicle is aquaplaning. 132 Stability Control PRINCIPLE OF OPERATION Stability control (ESP) warning lamp Electronic stability programme (ESP) The ESP warning lamp will flash when the system is operating. See Warning Lamps and Indicators (page 71). WARNING Emergency brake assist ESP does not relieve you of your responsibility to drive with due care and attention. WARNING Emergency brake assist does not relieve you of your responsibility to drive with due care and attention. Emergency brake assist will detect when you brake heavily by measuring the rate at which you press the brake pedal. It will provide maximum braking efficiency as long as you press the pedal. Emergency brake assist can reduce stopping distances in critical situations. B B Trailer stability control B WARNING A A B Trailer stability control does not relieve you of your responsibility to tow with due care and attention. A Trailer stability control is an enhanced feature of ESP, and automatically detects when an attached trailer starts to sway. E72903 A without ESP B with ESP If this situation occurs, the system will automatically brake individual wheels to stabilise the trailer and vehicle. In case a very severe sway is detected, the engine torque will be reduced and the vehicle will be slowed automatically. The ESP supports stability when the vehicle starts to slide away from your intended path. This is performed by braking individual wheels and reducing engine torque as needed. The system also provides an enhanced traction control function by reducing engine torque and may brake individual wheels if they spin when you accelerate. This improves your ability to pull away on slippery roads or loose surfaces, and improves comfort by limiting wheel spin in hairpin bends. USING STABILITY CONTROL Note: The system will be switched on automatically every time you switch the ignition on. To turn the system off and on. See Information Displays (page 75). 133 Hill Start Assist PRINCIPLE OF OPERATION WARNINGS At all times you are responsible for controlling the vehicle, supervising the system and intervening, if required. The system makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When the system is active, the vehicle will remain stationary on the slope for a short time after you release the brake pedal. During this time, you have time to move your foot from the brake to the accelerator pedal and pull away. The brakes are released automatically once the engine has developed sufficient drive to prevent the vehicle from rolling down the slope. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space. If a malfunction is detected when the system is active, the system will be deactivated and a message will be shown in the display. See Information Messages (page 83). You can activate the system only if the following conditions have been met: • The engine is running. • The system is switched on. • On vehicles with manual transmission, the clutch pedal is pressed. • No failure mode is present. WARNING The system does not replace the parking brake. When you leave the vehicle, always apply the parking brake and select first or reverse gear. To activate the system: 1. Press the brake pedal to bring the vehicle to a complete standstill. Keep the brake pedal depressed. 2. If the sensors detect that the vehicle is on a slope the system will be activated automatically. 3. When you remove your foot from the brake pedal, the vehicle will remain on the slope without rolling away for a short time. This hold time will automatically be extended if you are in the process of driving off. 4. Drive off in the normal manner. The brakes will be released automatically. USING HILL START ASSIST The system is activated automatically when you stop your vehicle on a slope greater than 3%. The system operates with the vehicle facing downhill if reverse gear is selected and with the vehicle facing uphill if any forward gear is selected. Vehicles with manual transmission only The system can be switched on and off using the information display. See General Information (page 75). Deactivating the system To deactivate the system, perform one of the following: Activating the system WARNINGS You must remain in the vehicle once you have activated the system. 134 Hill Start Assist • • • Wait for a short time until the system deactivates automatically. If a forward gear was selected when the system became active, select reverse gear. If reverse gear was selected when the system became active, select a forward gear. 135 Parking Aids Note: The outer sensors may detect the side walls of a garage. If the distance between the outer sensor and the side wall remains constant for three seconds, the tone will switch off. As you continue, the inner sensors will detect rearward objects. PRINCIPLE OF OPERATION WARNING The system does not relieve you of your responsibility to drive with due care and attention. USING THE PARKING AID VEHICLES WITH: REAR PARKING AID CAUTIONS Vehicles fitted with a trailer tow module not approved by us may not correctly detect obstacles. WARNING The sensors may not detect objects in heavy rain or other conditions that cause disruptive reflections. The parking aid does not relieve you of your responsibility to drive with due care and attention. The sensors may not detect objects with surfaces that absorb ultrasonic waves. The parking aid does not detect obstacles moving away from the vehicle. They will only be detected shortly after they start to move towards the vehicle again. If you use a high pressure spray to wash your vehicle, only spray the sensors briefly from a distance not less than 20 centimetres (8 inches). E77927 The parking aid is automatically activated when you select reverse gear with the ignition switched on. Parking aid sends tones via the audio system fitted and approved by us. If this is not working the parking aid system will not work. You will hear an intermittent tone at a distance of approximately 150 centimetres (59 inches) between the obstacle and rear bumper and approximately 50 centimetres (20 inches) to the side. Decreasing the distance accelerates the intermittent tone. Note: On vehicles fitted with a tow ball arm, the rear parking aid is deactivated automatically when any trailer lamps (or lighting boards) are connected to the 13-pin socket via a trailer tow module we have approved. Note: Keep the sensors free from dirt, ice and snow. Do not clean with sharp objects. Note: The parking aid may emit false tones if it detects a signal using the same frequency as the sensors or if the vehicle is fully laden. 136 Parking Aids A E130180 E130178 A A trailer symbol indicates there is a trailer attached and the system is disabled. Distance Indicator. As the distance decreases the indicator moves towards the vehicle. USING THE PARKING AID VEHICLES WITH: FRONT AND REAR PARKING AID A continuous tone will start at a distance of less than 30 centimetres (11 inches) to the rear bumper. WARNING Note: On Vehicles with a tow bar fitted and approved by us the continuous tone will start at a distance of 45 centimetres (18 inches) from the rear bumper. The parking aid does not relieve you of your responsibility to drive with due care and attention. Switching the parking aid on and off The parking aid is per default off. To switch the parking aid on, select reverse gear or press the switch in the instrument panel. For item location: See At a Glance (page 10). A The light in the switch illuminates when the parking aid is activated. E130179 To turn it off, press the switch again. A Malfunction indicator. Note: If a malfunction is indicated the system will be disabled. Have the system checked by a properly trained technician. 137 Parking Aids Manoeuvring with the parking aid A You will hear an alternating tone from the front and rear if obstacles are closer than 30 centimetres (11 inches) to the front and rear bumpers. B 1 A D C 2 E130382 A E130381 1 Reverse gear selected 2 Neutral or forward gear selected A Display and tone B Display and tone C Display only D Display and tone Distance Indicator. As the distance decreases the indicator moves towards the vehicle. A You will hear an intermittent tone at a distance of approximately 150 centimetres (59 inches) between the obstacle and rear bumper, approximately 80 centimetres (31 inches) between the obstacle and front bumper and approximately 50 centimetres (20 inches) to the side. Decreasing the distance accelerates the intermittent tone. A continuous tone will start at a distance of less than 30 centimetres (11 inches) to the front or rear bumper. E130383 A Malfuction indicator. Note: If a malfunction is indicated the system will be disabled. Have the system checked by a properly trained technician. Note: On vehicles with a tow bar fitted and approved by us the continuous tone will start at a distance of 45 centimetres (18 inches) from the rear bumper. 138 Parking Aids E130180 A trailer symbol indicates there is a trailer attached and the rear sensors are disabled. 139 Rear view camera PRINCIPLE OF OPERATION The camera is a visual aid for use when reversing. WARNING The system does not relieve you of your responsibility to drive with due care and attention. CAUTIONS If you use a high pressure spray to wash your vehicle, only spray the camera briefly from a distance not less than 20 centimetres (8 inches). E99105 Activating the rear view camera Do not apply pressure to the camera. CAUTION The camera may not detect objects that are close to the vehicle. Note: Keep the camera free from dirt, ice and snow. Do not clean with sharp objects, degreaser, wax or organic products. Use only a soft cloth. With the ignition and the audio unit switched on: 1. Press the parking aid switch in the instrument panel. For item location: See At a Glance (page 10). Or, 2. Engage reverse gear. During operation, guide lines appear in the display which represent your vehicle's path and approximate distance from rearward objects. USING THE REAR VIEW CAMERA The image is displayed on the screen. WARNINGS The operation of the camera may vary depending on the ambient temperature, vehicle and road conditions. The camera may not operate correctly in the following conditions: • Dark areas. • Intense light. • If the ambient temperature increases or decreases rapidly. • If the camera is wet, for example in rain or high humidity. • If the camera's view is obstructed, for example by mud. The lamp in the switch illuminates when the system is activated. The distances shown in the display may differ from the actual distance. Do not place objects in front of the camera. The camera is located on the luggage compartment lid near the handle. 140 Rear view camera Using the display D CAUTIONS Obstacles above the camera position will not be shown. Inspect the area behind your vehicle if necessary. E D C C B B A A Marks are for general guidance only, and are calculated for vehicles in maximum load conditions on an even road surface. The lines show a projected vehicle path (based on the current steering wheel angle) and the distance from the exterior mirrors and rear bumper. E99458 141 A Exterior mirror clearance - 0.1 metre (4 inches) B Red - up to 0.3 (12 inches) C Amber - 0.3 - 0.6 metre (12 - 24 inches) Rear view camera D Green - 0.6 - 0.9 metre (24 - 35 inches) E Amber - centre line of the projected vehicle path Note: The green line is extended from 0.9 metre (35 inches) up to a distance of 3.2 metres (126 inches). Note: When reversing with a trailer, the lines on the screen are not shown. The camera will show the vehicle direction and not the trailer. Deactivating the rear view camera Note: Disengage reverse gear. The display will stay on for a short period before switching off. Note: The system will automatically switch off once the vehicle speed has reached approximately 15 km/h (9 mph). Press the parking aid switch in the instrument panel. For item location: See At a Glance (page 10). Vehicles with parking aid The display will additionally show a coloured distance bar. This guide indicates the distance from the rear bumper to the detected obstacle. These are colour coded as follows: • Green - 0.6 to 1.8 metres (24 - 71 inches). • Amber - 0.3 to 0.6 metre (12 - 24 inches). • Red - 0.3 metre (12 inches) or less. 142 Active Park Assist The system will detect a suitable parallel parking space and steer the vehicle into the space. The system controls the steering while the driver controls the accelerator, transmission and brakes. The manoeuvre can be stopped at any time by holding the steering wheel or pressing the active park assist switch. See At a Glance (page 10). PRINCIPLE OF OPERATION WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. At all times you are responsible for controlling the vehicle, supervising the system and intervening if required. The system will visually and audibly instruct the driver throughout the procedure to safely park the vehicle. You must observe that the selected space remains clear of obstructions at all times in the manoeuver. USING ACTIVE PARK ASSIST Vehicles with overhanging loads, street furniture and other items may not be detected by the system. You must make sure that the selected space is suitable for parking. CAUTIONS The sensors may not detect objects in heavy rain or other conditions that cause disruptive reflections. Do not use the system if a trailer is attached to the vehicle. The sensors may not detect objects with surfaces that absorb ultrasonic waves. Do not use the system if a bike rack is attached to the back of the vehicle. The sensors may not detect the kerb. Do not use the system if an overhanging item is attached to the roof. Note: If the traction control system is disabled active park assist will not be available. See General Information (page 75). If the manoeuvre is interrupted before completion, the system will be disabled. The steering wheel position will not indicate the true position of the steering and you will have to take control of the vehicle. The system will not align the vehicle correctly if: • a spare tyre, or a tyre worn significantly more than the other tyres is used Make sure that loose clothing, your hands or your arms do not get caught in the rotating steering wheel. • • • • 143 the factory installed tyre size is not used on the vehicle the tyres skid you allow the vehicle to roll the weather conditions are poor (heavy rain, snow, fog, etc). Active Park Assist Move forwards at a maximum speed of 30 km/h (18 mph). Press the active park assist switch. See At a Glance (page 10). Use the direction indicator lever to select searching either to the left-hand side or right-hand side of the vehicle. Note: If no selection is made via the direction indicator lever the system will default to the passenger side of the vehicle. A E130107 Note: To disable the chimes: See Personalised Settings (page 82). Note: The arrow symbols or graphics in the display indicate on which side of the vehicle the system will park. The display will also advise you when to select reverse gear. The information and entertainment display will inform you and a chime will be heard when a suitable space is found. To park the vehicle, follow the instructions on the information and entertainment display. Slow down and stop at approximately position A, then follow the system instructions. E130108 Move the vehicle backwards cautiously using the accelerator and brake pedals to control the vehicle. Parking aid warning tones will sound. Stop the vehicle when you hear a continuous tone. WARNING If a speed of 10 km/h (6 mph) is exceeded the system will be disabled and you will need to take full control of the vehicle. 144 Active Park Assist You can take control of the manoeuvre by holding the steering wheel. A message may appear that the system can be resumed. To accept this message press the active park assist switch. See At a Glance (page 10). E130109 Move the vehicle forwards. Stop the vehicle when you hear a continuous tone. Repeat the above steps until the vehicle is satisfactory parked. The display will indicate when the system has finished the manoeuvre. 145 Cruise Control Setting a speed PRINCIPLE OF OPERATION Press the SET+ switch or the SET- switch to store and maintain your current speed. The cruise control indicator will illuminate. See Warning Lamps and Indicators (page 71). WARNING The system does not relieve you of your responsibility to drive with due care and attention. Changing the set speed Cruise control allows you to control your speed using the switches on the steering wheel. You can use cruise control when you exceed approximately 30 km/h (20 mph). WARNING When you are going downhill, your speed may increase above the set speed. The system will not apply the brakes. Change down a gear and press the SET- switch to assist the system in maintaining the set speed. USING CRUISE CONTROL WARNING Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. Do not use cruise control in heavy traffic, on twisty roads or when the road surface is slippery. Switching cruise control on A B E130073 E130072 Note: The system is ready for you to set a speed. A Accelerate B Decelerate Cancelling the set speed Press the brake pedal or pull the CAN switch. 146 Cruise Control Note: The system will no longer control your speed. The cruise control indicator will not illuminate but the system will retain the speed that you previously set. Resuming the set speed Pull the RES switch. The cruise control indicator will illuminate and the system will attempt to resume the speed that you previously set. Switching cruise control off E130072 The system will not retain the speed that you previously set. The cruise control indicator will not illuminate. 147 Adaptive cruise control (ACC) Note: When adaptive cruise control is activated, you may hear some unusual sounds during automatic braking. This is normal and caused by the automatic braking system. PRINCIPLE OF OPERATION WARNINGS The system is not a collision warning or avoidance system. The separate forward alert function provides a collision warning and mitigation feature. See Forward alert function (page 152). You must intervene if the system does not detect a vehicle in front. Note: Keep the front of the vehicle free from dirt, metal badges or objects, including vehicle front protectors and additional lights which may prevent the sensor from operating. The system is designed to help you maintain a gap from the vehicle ahead or a set road speed if there is no slower vehicle ahead. The system is intended to provide enhanced operation of the vehicle when following other vehicles which are in the same lane and travelling in the same direction. When driving you are responsible for maintaining the correct distance and speed, even when adaptive cruise control is used. You must always pay attention to the traffic conditions and intervene when adaptive cruise control is not maintaining a suitable speed or suitable distance. The system is based on the use of a radar sensor which projects a beam directly forward of the vehicle. This beam will detect any vehicle ahead within the system's range. The system does not relieve you of your responsibility to drive with due care and attention. The system does not brake for slow or stationary vehicles, pedestrians, objects in the road, oncoming and crossing vehicles. The radar sensor is mounted behind the front grille. CAUTIONS Only use adaptive cruise control when conditions are favourable, for example on motorways and main roads with steady free flowing traffic. Do not use in poor visibility, specifically fog, heavy rain, spray or snow. Do not use on icy or slippery roads. Do not use the system when entering or leaving a motorway. The radar sensor has a limited field of vision. In some situations it may detect a vehicle other than the one expected or not detect any vehicle at all. 148 Adaptive cruise control (ACC) Detection beam issues Automatic braking with ACC WARNINGS You must take immediate action once alerted, as the adaptive cruise control braking will not be sufficient to keep a safe distance to the vehicle in front. In some cases there may be no warning or the warning may be delayed. You should always apply the brakes when necessary. When following a vehicle in front of you, adaptive cruise control will not automatically decelerate to a stop. The system will automatically brake for you, if required to maintain the set gap between your vehicle and the one detected in front. This braking capacity is limited to approximately 30% of the total manual braking capacity to ensure smooth and comfortable cruising. If the car needs to brake more heavily than this, and you do not intervene by braking manually, an alarm will sound and a warning symbol will be displayed in the cluster. E71621 Detection issues can occur: • • With vehicles that edge into your lane that can only be detected once they have moved fully into your lane (A). Motorcycles may be detected late, or not at all. (B) With vehicles in front when going into and coming out of a bend (C). The detection beam will not follow sharp curves in the road. In these cases the system may brake late or unexpectedly. You should stay alert and intervene if necessary. 149 Adaptive cruise control (ACC) Changing the set speed USING ADAPTIVE CRUISE CONTROL Note: Vehicle speed may be increased and decreased at intervals of 5 km/h or 5 mph. The system is operated by adjustment controls mounted on the steering wheel. Note: If the system does not react to these changes the reason may be that the gap interval to the vehicle in front prevents an increase in speed. A Press switch A to increase or switch B to decrease the set speed until the desired set speed is shown in the information display. The vehicle speed will gradually change to the selected speed. F Setting the vehicle gap E CAUTION E133195 D C A Set speed increase B Set speed decrease C ACC on/off D ACC gap increase E ACC gap decrease F ACC cancel/resume Use the appropriate gap setting in accordance with local traffic regulations. B Note: The gap setting is time dependent and therefore the distance will automatically adjust with your speed. For example on a gap setting of four bars, the time gap is 1.8 seconds. This will mean that at a speed of 100 km/h (62 mph), the distance to the vehicle in front will be maintained at 50 metres (164 feet). Note: If the accelerator is depressed for a short period, for example when overtaking, the system is temporarily deactivated and then reactivated when the accelerator pedal is released. A message is displayed in the information display. Switching the system on Press switch C. The system is set to standby mode. Setting a speed Note: The gap setting will remain unchanged during ignition cycles. Note: The system must be in standby mode. Press switch A or switch B to select your desired cruise speed. The speed is displayed in the information display and stored as the set speed. E82311 150 Adaptive cruise control (ACC) The distance between you and the vehicle detected in front is maintained by a variable setting. There are five steps which are represented by horizontal bars displayed in the information display. One bar indicates the smallest gap and five bars indicates the largest gap. These bars are shown empty when in standby mode and filled when in active mode. Press the brake pedal or pull switch F to cancel the system. The system will return to standby mode allowing you full manual control of the vehicle. The set speed and gap setting are retained in the memory. If no vehicle is detected in front, then only your vehicle is displayed in the information display below the bars. The system will maintain the set speed when conditions permit. The set gap is maintained and displayed. Switching the system off If a vehicle is detected by the sensor, the display will show another vehicle above the horizontal bars: Automatic deactivation Pull switch F again to resume. The system will resume with the previously set speed and vehicle gap setting if conditions permit. Press switch C to turn the system off. Note: When deactivating the system by pressing switch C, the stored speed is not retained. Note: If the engine speed drops too low, a message is displayed in the information display instructing you to change down a gear (manual transmission only). If you do not follow this recommendation then the system will go into automatic deactivation mode. Note: The system will not operate if traction control has been switched off. E82312 The system is dependent on various other safety systems, for example ABS and ESP. If any of these systems are malfunctioning or reacting to an emergency, the system is automatically deactivated. This is a follow mode, and the system will accelerate or decelerate as necessary to maintain the set gap. Pull switch E to decrease the gap or switch D to increase the gap. The gap selected will be represented by the number of bars in the display. In the event of automatic deactivation a signal will sound and the message is displayed in the information display. See Information Messages (page 83). You must then intervene and adapt your driving and speed to vehicles in front. Note: The recommended gap setting is four or five bars. Temporarily deactivating the system An automatic deactivation can be due to the: Note: The system is cancelled when the gear lever is moved to a neutral position or if the accelerator pedal or clutch is depressed for a long period of time. • • 151 vehicle speed falling below 30 km/h (20 mph) wheels losing traction Adaptive cruise control (ACC) • • • • Note: The collision alerts will only occur if the system is switched on, however the brake support is always on and cannot be turned off. brake temperature being too high, for example when driving on mountainous or hilly roads engine speed being too low radar sensor being covered parking brake being applied. Note: The system may be used with or without the Adaptive cruise control system being activated. The system assists you by warning of the risk of a collision with a vehicle in front. FORWARD ALERT FUNCTION The system alerts you by warning chimes and a visual warning in the information display. See Information Messages (page 83). WARNINGS Never wait for a collision warning. When driving you are responsible for maintaining the correct distance and speed, even when the system is used. Brake support is activated to enable full braking effectiveness, and reduce the severity of a collision with the vehicle in front. The system will only react to vehicles in front travelling in the same direction and will not react to slow or stationary vehicles. Switching the system on and off Never drive in a manner to provoke the system. The system is designed to assist in emergencies only. Note: When the system is switched off, a warning indicator will remain illuminated in the information display. See Warning Lamps and Indicators (page 71). CAUTIONS Warnings may be triggered late, be absent or triggered unnecessarily due to detection beam issues. See Principle of Operation (page 148). Note: The system status and settings will remain unchanged during ignition cycles. The system can be switched on and off using the information display. See General Information (page 75). The system uses the same radar sensors as adaptive cruise control and therefore has the same limitations. See Principle of Operation (page 148). Adjusting the warning sensitivity You may adjust the system warning sensitivity using the buttons on the steering wheel. See General Information (page 75). This controls how early the visual and audible warning is activated. Note: The brake support system only reduces the collision speed if you brake immediately once alerted. Note: If the brake pedal is depressed sufficiently quickly then braking is implemented with full brake function, even if the force on the pedal is light. Note: Brake support prepares the brake system for rapid braking and the brakes are applied gently, which may be noticed as a slight jerk. 152 Speed Limiter Switching the system on and off PRINCIPLE OF OPERATION Press switch B. The information display will prompt for a speed to be set. WARNING When you are going downhill, your speed may increase above the set speed. The system will not apply the brakes but a warning will be given. Setting the speed limit Use the cruise control switches to alter the maximum speed setting. Press switch A or switch C to select your desired speed limit. The speed is displayed in the information display and stored as the set speed. The system allows you to set a speed, to which the vehicle then becomes limited. The set speed will become the effective maximum speed of the vehicle, but with the option to temporarily exceed this limit if required. Pull switch D to cancel the limiter and place it in standby mode. The information display will confirm deactivation by showing the set speed crossed out. USING THE SPEED LIMITER Note: The set speed limit can be intentionally exceeded for a short period if required, for example when overtaking. Pull switch D again to resume the limiter. The information display will confirm the system is active by showing the set speed again. The system is operated by adjustment controls mounted on the steering wheel. Intentionally exceeding the set speed limit Depress the accelerator fully to temporarily deactivate the system. The system will reactivate once the vehicle speed drops below the set speed. A D System warnings B If the set limit is accidentally exceeded, for example driving downhill, the information display will show the set speed flashing together with an audible warning chime. C If the set limit is intentionally exceeded the information display will show the set speed crossed out. E133198 A Set speed increase B Speed limiter on/off C Set speed decrease D Speed limiter cancel/resume 153 Driver Alert Note: Keep the windscreen free from obstructions such as bird droppings, insects and snow or ice. PRINCIPLE OF OPERATION WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. Note: The system is intended as a driver aid when driving on fast main roads and motorways. Note: The system calculates an alertness level at vehicle speeds above approximately 65 km/h (40 mph). At all times you are responsible for controlling the vehicle, supervising the system and intervening if required. If the sensor becomes blocked the system may not function. The system automatically monitors your driving behaviour using various inputs including the front camera sensor. Take regular rest breaks as required and do not wait for the system to warn you if you feel tired. If the system detects that you are becoming drowsy or there is a deterioration in your driving, the system will alert you. Take rest breaks only where it is safe to do so. USING DRIVER ALERT Certain driving styles and behaviour may result in the system issuing a warning even if you are not feeling Switching the system on and off Note: The system status will remain unchanged during ignition cycles. tired. Activate the system using the information display. See Information Displays (page 75). CAUTIONS In cold and severe weather conditions the system may not function. Rain, snow, spray and large contrasts in lighting can all influence the sensor. Once activated the system will calculate your alertness level based upon your driving behaviour in relation to the lane markings, and other factors. The system will not operate if the sensor cannot track the road lane markings. System warnings The system may not operate in areas during roadworks construction. Note: The system will not issue warnings below approximately 65 km/h (40 mph). The system may not operate on roads with sharp bends or narrow lanes. The warning system is in two stages. At first the system issues a temporary warning that a rest should be taken. This message will only appear for a short time. If a rest is not then taken a further warning may be issued which will remain in the information display until cancelled. See Information Messages (page 83). Do not carry out windscreen repairs in the immediate area surrounding the sensor. If your vehicle is fitted with a suspension kit not approved by us, the system may not function correctly. Press OK on the steering wheel control to remove the warning. 154 Driver Alert System display Resetting the system When active the system will run automatically in the background and only issue warnings if required. You can view the status at any time using the information display. See General Information (page 75). You can reset the system by either: • Switching the ignition off and on. • Stopping the vehicle and then opening and closing the driver's door. The alertness level is shown by six steps as a coloured bar. E131358 Alertness level is fine, no rest required. E131359 Alertness level is critical, indicating that a rest should be taken as soon as safely possible. The status bar will travel from left to right as the calculated alertness level decreases. As the rest icon is approached the colour turns from green to yellow and then finally red when a rest break must be taken. • • • Green - No rest required. Yellow - First (temporary) warning. Red - Second warning. Note: The alertness level will be shown in grey if the camera sensor cannot track the road lane markings or if the vehicle speed drops below approximately 65 km/h (40 mph). 155 Lane Departure Warning Note: The system is intended as a driver aid when driving on fast main roads and motorways. PRINCIPLE OF OPERATION WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. Note: The system may not operate during hard braking or acceleration and, when you are intentionally steering the vehicle. Note: The system will operate with a minimum of one tracked lane marking. At all times you are responsible for controlling the vehicle, supervising the system and intervening if required. Note: The system will only operate above vehicle speeds of approximately 65 km/h (40 mph). If the sensor becomes blocked the system may not function. A sensor is mounted behind the interior rear view mirror. It continuously monitors conditions to alert you of unintentional lane drifting at high speeds. Lane markings may not always be properly tracked by the sensor. Other structures or objects may sometimes be incorrectly detected as a lane marking, resulting in a false or missed warning. The system will automatically detect and track the lane markings on the road. If it detects that the vehicle is unintentionally drifting towards the lane boundaries then a visual warning will be displayed in the information display. There is also a warning given in the form of a vibration felt through the steering wheel. CAUTIONS In cold and severe weather conditions the system may not function. Rain, snow, spray and large contrasts in lighting can all influence the sensor. The system will not operate if the sensor cannot track the road lane markings. USING LANE DEPARTURE WARNING The system may not operate in areas during roadworks construction. Switching the system on and off The system may not operate on roads with sharp bends or narrow lanes. Note: When the system is switched off, a warning indicator will remain illuminated in the information display. See Warning Lamps and Indicators (page 71). Do not carry out windscreen repairs in the immediate area surrounding the sensor. Note: The system status and settings will remain unchanged during ignition cycles. If your vehicle is fitted with a suspension kit not approved by us, the system may not function correctly. Note: Keep the windscreen free from obstructions such as bird droppings, insects and snow or ice. E132099 156 Lane Departure Warning The lane markings are colour coded as follows: • Green - The system is ready to warn you of any unintentional lane departure. • Red - The vehicle is approaching or is too close to the detected lane boundary. Take immediate safe action to reposition the vehicle. • Grey - The relevant lane boundary will be suppressed. Activate and deactivate the system using the button on the indicator stalk. Press the button to turn the system off. Press the button twice to turn the system on. Setting the steering wheel vibration level The system has three intensity levels which can be set using the information display. See General Information (page 75). Instances where a lane boundary may be suppressed: • Lane markings on the road may not be detected by the sensor. • The direction indicator for that side of the vehicle is on. • During hard acceleration and braking, or if direct steering is applied. • Vehicle speed is outside the operating limits • If there is an ABS or Stability Control (ESP) intervention. • Narrow lane width. Setting the system sensitivity You can adjust how quickly the system warns you of a dangerous situation. The system has two sensitivity levels which can be set using the information display. See General Information (page 75). System warnings If the lane markings turn red or a vibration is felt through the steering wheel you must take immediate and safe action to align the vehicle and correct any unintended lane drift. E132651 A column of lane markings is displayed either side of the vehicle graphic. 157 Lane Keeping Aid Note: Keep the windscreen free from obstructions such as bird droppings, insects and snow or ice. PRINCIPLE OF OPERATION WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. Note: The system is intended as a driver aid when driving on fast main roads and motorways. Note: The system may not operate during hard braking or acceleration and when you are intentionally steering the vehicle. At all times you are responsible for controlling the vehicle, supervising the system and intervening if required. Note: The system will operate with a minimum of one tracked lane marking. If the sensor becomes blocked the system may not function. Note: The system will only operate between vehicle speeds of approximately 65 km/h (40 mph) and 180 km/h (112 mph). Lane markings may not always be properly tracked by the sensor. Other structures or objects may sometimes be incorrectly detected as a lane marking, resulting in a false or missed warning in conjunction with a false or missed steering intervention. Note: If the system does not detect an active steering input by the driver it will be temporarily deactivated until you resume control. The system alerts you with a warning chime and a message in the display. Always have your hands on the steering wheel in case you need to overrule the system. A sensor is mounted behind the interior rear view mirror. It continuously monitors conditions to alert you of unintentional lane drifting at high speeds. The system may not operate in areas during roadworks construction. The system will automatically detect and track the lane markings on the road. If it detects that the vehicle is unintentionally drifting towards the lane boundaries then a visual warning will be displayed in the information display. The system will also automatically apply a steering torque to correct the vehicle path. If the system is unable to correct the vehicle path a lane departure warning will be given. See Using lane departure warning (page 156). The system may not operate on roads with sharp bends or narrow lanes. USING THE LANE KEEPING AID CAUTIONS In cold and severe weather conditions the system may not function. Rain, snow, spray and large contrasts in lighting can all influence the sensor. The system will not operate if the sensor cannot track the road lane markings. Do not carry out windscreen repairs in the immediate area surrounding the sensor. Switching the system on and off If your vehicle is fitted with a suspension kit not approved by us, the system may not function correctly. Note: When the system has been switched on, lane departure warning is per default on. Note: The system is per default off. 158 Lane Keeping Aid • • E132099 Activate and deactivate the system using the button on the indicator stalk. Red - The vehicle is approaching or is too close to the detected lane boundary. A warning is given in the form of a vibration felt through the steering wheel. Take immediate safe action to reposition the vehicle. Grey - The relevant lane boundary will be suppressed. Instances where a lane boundary may be suppressed: • Lane markings on the road may not be detected by the sensor. • The direction indicator for that side of the vehicle is on. • During hard acceleration and braking, or if direct steering is applied. • Vehicle speed is outside the operating limits • If there is an ABS or Stability Control (ESP) intervention. • Narrow lane width. Press the button three times to switch the system on. Press the button again to turn the system off. System warnings Note: The system can be overridden at any time during its operation by turning the steering wheel. E132651 A column of lane markings is displayed either side of the vehicle graphic. The lane markings are colour coded as follows: • Green - The system is ready to intervene if an unintentional lane departure may occur. • Yellow - The system will automatically apply a steering torque to align the vehicle path and correct any unintended lane drift. 159 Traffic Sign Recognition The system will automatically detect recognizable traffic signs, for example speed limit signs, no overtaking signs and speed limit cancellation signs. PRINCIPLE OF OPERATION WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. USING TRAFFIC SIGN RECOGNITION At all times you are responsible for controlling the vehicle, supervising the system and intervening if required. Switching the system on and off Note: The system status and settings will remain unchanged during ignition cycles. If the sensor becomes blocked the system may not function. The system can be switched on and off using the information display. See General Information (page 75). CAUTIONS In cold and severe weather conditions the system may not function. Rain, snow, spray and large contrasts in lighting can all influence the sensor. Setting the system speed warning The system has a number of speed warning levels which can be set using the information display. See General Information (page 75). Do not carry out windscreen repairs in the immediate area surrounding the sensor. System display If your vehicle is fitted with a suspension kit not approved by us, the system may not function correctly. Always fit Ford Original Parts when replacing headlamp bulbs. Other bulbs may reduce system performance. Note: Keep the windscreen free from obstructions such as bird droppings, insects and snow or ice. E132994 The system can display two traffic signs in parallel. Note: The system may not detect all traffic signs. You can view the status at any time using the information display. Note: The system is designed to read signs meeting the Vienna convention. The system display is in four stages as follows: 1. All new recognisable traffic signs will appear brighter than the other warning signs in the display. 2. After a predetermined time they will be shown normally. A sensor is mounted behind the interior rear view mirror. It continuously monitors road signs to alert you of the current legal speed limit and overtaking regulations. 160 Traffic Sign Recognition 3. After a predetermined distance they will be shown greyed out. 4. After another predetermined distance they will be deleted. If a supplementary traffic sign is detected, for example a reduced speed limit in wet road conditions sign, it will not be shown but will appear as an empty box underneath the respective sign. 161 Active City Stop PRINCIPLE OF OPERATION CAUTIONS If your vehicle is fitted with a windscreen not approved by us, the system may not function correctly. WARNINGS The system does not relieve you of your responsibility to drive with due care and attention. If the engine stops after the system has been activated, the hazard warning flashers will be activated. At all times you are responsible for controlling the vehicle, supervising the system and intervening if required. Note: Keep the windscreen free from obstructions such as bird droppings, insects and snow or ice. Never look directly into the sensor with any type of object, there is a risk of eye injury. Note: Keep the bonnet free of ice and snow, otherwise the system may not function correctly. If the sensor becomes blocked the system may not function. A sensor is mounted behind the interior rear view mirror. It continuously monitors conditions to decide when to intervene. To achieve full system performance, the brake system needs to be bedded in. See Running-In (page The system is designed to help you reduce low speed collisions into the rear of another vehicle. It will also help you reduce the impact damage or potentially avoid the collision completely. 176). The system performance may vary depending on the vehicle and road conditions. The system operates at speeds below approximately 30 km/h (19 mph) by applying the brakes when the sensor detects that a collision is likely. The system will not react to vehicles driving in a different direction. The system will not react to bicycles, motorcycles, people or animals. You must depress the brake pedal to obtain full braking force. When the ignition is on the sensor will constantly transmit a laser beam. When the system is braking or has automatically applied the brakes, a message will be shown in the display. The system will not operate during harsh acceleration. For laser sensor information and data: See Type approvals (page 287). CAUTIONS In cold and severe weather conditions the system may not function. Rain, snow, spray and ice can all influence the sensor. USING ACTIVE CITY STOP WARNING Never look directly into the sensor with any type of object, there is a risk of eye injury. Do not carry out windscreen repairs in the immediate area surrounding the sensor. 162 Active City Stop Switching the system on and off Note: The system is per default on. Note: In certain situations, it may be advisable to disable the system, for example driving off road when objects may cover the windscreen. Activate and deactivate the system using the information display. See General Information (page 75). 163 Load Carrying GENERAL INFORMATION WARNINGS Use load securing straps to an approved standard, e.g. DIN. Make sure that you secure all loose items properly. Place luggage and other loads as low and as far forward as possible within the luggage or loadspace. Do not drive with the tailgate or rear door open. Exhaust fumes may enter the vehicle. E97377 LUGGAGE ANCHOR POINTS Do not exceed the maximum front and rear axle loads for your vehicle. See Vehicle identification (page 221). Heavy loads, when placed in the passenger compartment, should be on folded rear seats as shown. See Rear Seats (page 109). CAUTIONS Do not allow items to contact the rear windows. Do not use any abrasive materials to clean the interior of the rear windows. Do not install stickers or labels to the interior of the rear windows. E132901 Lift the flap to access the anchor point. LUGGAGE COVERS WARNING Do not place objects on the luggage cover. 164 Load Carrying To install the cargo retention net cassette: Remove the luggage cover. Push the sliders on the cassette towards each other and insert the telescopic bar into the holes on the sidewall behind the rear seatbacks. Ensure that the end caps with the anti-rotation pin are correctly fitted in the side trim. E72969 Pull out the cover and secure it in the retaining points. Release it from the retaining points and let it roll back into the case. Clip the retaining hook onto the case. E72970 To remove or install the cover, push either end of the case inwards. E78834 Pull up the net and insert the ends of the bar into the retainers on the roof. CARGO NETS Ensure that the bar is pushed forwards into the narrow section of the retainers. Luggage retention net WARNING WARNING After installing the cassette, press the front edge of the luggage cover back down into its original position (forwards) to prevent vision out of the rear screen being obscured. On Estate vehicles, luggage retention net anchor points are not fitted behind the first row seats, but are fitted behind the second row seats. 165 Load Carrying Installing behind the front seats Reinstall the luggage cover. Remove in the reverse order. Cargo net A B E86848 1. Push the ends of the bar on the grille towards each other and insert them into the retainers on the roof. Push the bar forwards into the narrow section of the retainers. E78835 A With retaining rings B Without retaining rings The cargo net can be used to prevent objects sliding around. Attach the hooks at each corner of the net to the four retaining points on the load floor. DOG GUARD CAUTION E87782 Keep a distance of at least one centimetre between the dog guard and the seats in front of it. 2. Attach the dog guard to the lower anchor points. Do not tighten the screws. 166 Load Carrying 1. Push the ends of the bar on the grille towards each other and insert them into the retainers on the roof. Push the bar forwards into the narrow section of the retainers. E87783 3. Attach the grille to the lower bar with the handwheels. Do not tighten the handwheels. 4. Tighten the screws at the lower anchor points. 5. Tighten the handwheels. Installing behind the rear seats E104424 2. Remove two screws from both the luggage anchor points. See Luggage Anchor Points (page 164). 3. Attach the lower bar to the grille with the handwheels. Do not tighten the handwheels. 4. Attach the dog guard lower bar to the luggage anchor points, secure with the new supplied screws. 5. Tighten the handwheels. Remove in the reverse order. E86848 167 Load Carrying ROOF RACKS AND LOAD CARRIERS Note: Before installing the crossbars, clean the side mounting tracks with water and a sponge. Roof rack Note: Position the crossbars as shown. A WARNINGS If you use a roof rack, the fuel consumption of your vehicle will be higher and you may experience different driving characteristics. Read and follow the manufacturer’s instructions when you are fitting a roof rack. B E135136 Do not exceed the maximum permissible roof load of 75 kilogrammes (165 pounds) (including the roof rack). A 515 mm (20 inches) B 750 mm (30 inches) Check the security of the roof rack and tighten its fittings as follows: • • • Before starting. After driving 50 kilometres (30 miles). At 1000 kilometres (600 miles) intervals. To reduce fuel consumption, cross rails should be removed when not in use. E135137 Note: Adhesive pads are supplied to help reduce the buffeting noise. Installing the crossbars Note: Make sure the surface of the crossbars is clean before attaching the adhesive pads. WARNINGS Distribute the load evenly over the loading area and keep the centre of gravity as low as possible. Secure the load well to prevent it from slipping. Never place any loads directly onto the roof surface. 1. Remove the crossbars before entering an automatic car wash. Note: The side mounting tracks are designed such that crossbars (for bicycle carriers, ski carriers etc.) from the Ford accessories range can be fitted. 168 Remove the backing and attach the adhesive pads to the crossbars in the positions shown. Load Carrying 4 Nm 4 2 4Nm 7 3 E135138 2. Insert the key. Turn the key anti-clockwise. 3. Remove the cover. 4. Loosen the screws. A A E135139 Note: Make sure there is no gap between crossbar and rail(A). 6. Install the crossbars. 7. Tighten the screws until you hear a distinct click. 8. Install the cover. Turn the key clockwise to lock. 9. Remove the key. B Installing a roof box E135140 E135141 5. Install rubber strips in the positions shown. Make sure the adhesive pads are not in contact with the installation bolt. 169 Towing Change down a gear before you reach a steep downhill gradient. TOWING A TRAILER WARNINGS Do not exceed 100 km/h (62 mph). RETRACTABLE TOW BALL WARNING The rear tyre pressures must be increased by 0.2 bar (3 psi) above specification. See Technical Specifications (page 218). You will hear a warning tone when the tow ball arm is not in one of the locked positions. The warning tone will switch off after 30 seconds. If you do not hear the tone when moving the tow ball arm or at system activation, do not use the tow bar and have it checked by a properly trained technician. Do not exceed the maximum gross train weight stated on the vehicle identification plate. See Vehicle identification (page 221). CAUTION CAUTION Do not exceed the maximum permissible nose weight, i.e. vertical weight on the tow ball, of 75 kilogrammes (165 pounds). Only move the tow ball arm with your hand. Never use your foot or auxiliary tools as damage to the mechanism may result. Note: Not all vehicles are suitable or approved to have tow bars fitted. Check with your dealer first. B Place loads as low and central to the axle(s) of the trailer as possible. If you are towing with an unladen vehicle, the load in the trailer should be placed toward the nose, within the maximum nose load, as this gives the best stability. A The stability of the vehicle to trailer combination is very much dependant on the quality of the trailer. E139283 A 13-pin trailer socket A is provided underneath the rear bumper next to the tow ball arm B. In high altitude regions above 1000 metres (3281 feet), the stipulated maximum permitted gross train weight must be reduced by 10% for every additional 1000 metres (3281 feet). Releasing the tow ball arm CAUTION Steep gradients Do not touch the tow ball arm during the release process. WARNING The overrun brake on a trailer is not controlled by ABS. 170 Towing Note: If the release process is interrupted, for example an obstacle in the way or loss of power supply, the system will need to be reset. To reset the system, repeat the release process. Note: The lamp in the switch illuminates when the system is activated. The following conditions must be met before releasing the tow ball arm: • • • • The luggage compartment lid must be open. The ignition must be switched off. No plug must be attached to the 13-pin trailer socket. E139284 The tow ball arm automatically swivels into the lowered position. If the tow ball arm fails to release, press the button again for 15 seconds. The battery voltage must be greater than 11 volts. WARNING If it still fails to release, do not use the tow bar and have it checked by a properly trained technician. Swivelling the tow ball arm out E132909 1. Press the button to activate the system. 2. Press the button again within four seconds to release the tow ball arm. E75179 Move the tow ball arm to the operating position. The tow ball arm automatically locks in the operating position. The locking process is clearly audible and the warning tone will stop. 171 Towing Swivelling the tow ball arm in Fault conditions If the tow ball arm release button is illuminated or you hear a warning tone when the ignition switch is in position II, repeat the release process. CAUTION Before swivelling the tow ball arm in, always unhitch the trailer or dismantle load carriers and their attachments. Dismantle attachments for tracking stabilisation. Remove the plug for the trailer power supply and the adapter from the socket. Failure to do so may result in damage to the bumper. 1. If you pull on the tow ball arm during the release process, the system will stop moving to prevent an overload condition. To reset the system, press the release button for 15 seconds. Driving with a trailer Release the tow ball arm. See releasing the tow ball arm. WARNINGS In the event of a vehicle breakdown, disconnect the trailer before towing the vehicle. If any of the conditions below cannot be met, do not use the tow bar and have it checked by a properly trained technician. Before starting your journey, make sure that the tow ball arm is properly locked. Check that: E139284 2. The tow ball arm automatically swivels into the lowered position. • • there is no warning tone when the locking procedure has been completed the tow ball arm is locked. It must not move when jerked. Maintenance CAUTIONS The towing hitch and control unit are maintenance-free. Do not grease or oil them. Only the manufacturer should carry out repairs or dismantle the towing hitch. E75177 3. Move the tow ball arm to the stop in the stowed position. The tow ball arm automatically locks in the stowed position. The locking process is clearly audible and the warning tone will stop. If you use a high pressure spray to wash your vehicle, do not direct the spray onto the swivel joint of the tow ball arm. 172 Towing Unlocking the tow ball arm mechanism TOW BALL WARNINGS When not in use, always transport the tow ball arm securely fastened in the luggage compartment. 3 Take special care when fitting the tow ball arm as the safety of the vehicle and the trailer depends on 1 this. Do not use any tools for mounting or dismounting the tow ball arm. Do not modify the trailer coupling. Do not disassemble or repair the tow ball arm. 2 E71329 1. Remove the protecting cap (1). Insert the key and turn it clockwise to unlock (2). 2. Hold the tow ball arm. Pull the handwheel out and turn it clockwise until it clicks (3). 3. The red mark on the handwheel must align with the green mark on the tow ball. 4. Release the handwheel. The tow ball arm is unlocked. E71328 A 13-pin trailer socket and the tow ball arm seat are provided underneath the rear bumper. Turn the trailer socket down through 90 degrees until it engages in the end position. 173 Towing Inserting the tow ball arm Driving with a trailer A 1 B E71331 WARNING If any of the below conditions cannot be met, do not use the tow bar and have it checked by a properly trained technician. 2 Before starting your journey, make sure that the tow ball arm is properly locked. Check that: E71330 WARNING • • The tow ball arm may only be inserted when completely unlocked. • • 1. Pull out the plug. 2. Insert the tow ball arm vertically and press it upwards until it engages (1). Do not hold your hand near the handwheel. 3. The green mark on the handwheel must align with the green mark on the tow ball. 4. To lock, turn the key anti-clockwise and remove the key (2). 5. Pull the protecting cap from the key bow and press it onto the lock. 174 the green marks are aligned the handwheel (A) is correctly fitted to the tow ball arm you have removed the key (B) the tow ball arm is securely positioned. It must not move when jerked. Towing Removing the tow ball arm Driving without a trailer 1 3 2 E94771 1. Remove the tow ball arm. 2. Insert the plug into its seat (1). 1 E71332 WARNING 1. Unhitch the trailer. 2. Remove the protecting cap. Press the cap into the key bow. Insert the key and unlock (1). 3. Hold the tow ball arm. Pull the handwheel out, turn it clockwise against the stop (2) and remove the tow ball arm (3). 4. Release the handwheel. Never unlock the tow ball arm with the trailer attached. Maintenance WARNING Remove the tow ball arm and protect the seat with the plug before steam cleaning your vehicle. When unlocked in this way, the tow ball arm can be reinserted at any time. Keep the system clean. Periodically lubricate bearings, sliding surfaces, and locking balls with resin-free grease or oil and the lock with graphite. In case of loss, replacement keys are available from the manufacturer by stating the number on the lock cylinder. 175 Driving Hints In an emergency, the vehicle can be driven through water to a maximum depth of 200 millimetres (8 inches) and at a maximum speed of 10 km/h (6 mph). Extra caution should be exercised when driving through flowing water. RUNNING-IN Tyres WARNING New tyres need to be run-in for approximately 500 kilometres (300 miles). During this time, you may experience different driving characteristics. When driving in water, maintain a low speed and do not stop the vehicle. After driving through water, and as soon as it is safe to do so: • Depress the brake pedal lightly and check that full brake function is achieved. • Check that the horn works. • Check that the vehicle's lights are fully operational. • Check the power assistance of the steering system. Brakes and clutch WARNING Avoid heavy use of the brakes and clutch if possible for the first 150 kilometres (100 miles) in town and for the first 1500 kilometres (1000 miles) on motorways. Engine CAUTION Avoid driving too fast during the first 1500 kilometres (1000 miles). Vary your speed frequently and change up through the gears early. Do not labour the engine. COLD WEATHER PRECAUTIONS The functional operation of some components and systems can be affected at temperatures below -30°C (-22°F). DRIVING THROUGH WATER Driving through water CAUTIONS Drive through water in an emergency only, and not as part of normal driving. Engine damage can occur if water enters the air filter. 176 Roadside Emergencies FIRST AID KIT Space is provided in the luggage compartment. WARNING TRIANGLE Space is provided in the luggage compartment. 177 Fuses Load compartment fuse box FUSE BOX LOCATIONS 4-door Engine compartment fuse box This fuse box is located in the engine compartment See Maintenance (page 190). Passenger compartment fuse box E135336 5-door E130170 E135337 E130171 1. Pinch the retaining clips to release the cover. 2. Lower the fuse box cover and pull it towards you. Install in the reverse order. 178 Fuses Estate CHANGING A FUSE WARNINGS Do not modify the electrical system of your vehicle in any way. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by a properly trained technician. Switch the ignition and all electrical equipment off before touching or attempting to change a fuse. CAUTION E135338 Fit a replacement fuse with the same rating as the one you have removed. Note: You can identify a blown fuse by a break in the filament. Note: All fuses, except high current fuses, are a push fit. Note: A fuse puller is located in the engine compartment fuse box. 179 Fuses FUSE SPECIFICATION CHART Engine compartment fuse box E129925 Fuse Ampere rating 7 40 ABS pump, Electronic Stability Program (ESP) pump 8 30 Electronic Stability Program (ESP) valve 9 30 Heated rear window 10 40 Heater blower 11 30 Start-stop module Circuits protected 12 30 Engine management systems 13 30 Starter relay 14 40 Heated windscreen (right-hand side) 15 25 Transmission control module 180 Fuses Fuse Ampere rating 16 40 Heated windscreen (left-hand side) 17 20 Auxiliary heater 18 20 Windscreen wipers Circuits protected 19 5 ABS, Electronic Stability Program (ESP) module 20 15 Horn 21 5 Brake lamp switch 22 15 Battery monitoring system 23 5 Relay coils, lighting control switch module 24 20 Rear power outlet 25 10 Electric exterior mirrors 26 15 Transmission control module 27 15 Air conditioning clutch 28 5 Adaptive cruise control 29 20 30 5 Powertrain control module (PCM) 31 - Not used 32 10 EGR Valve, swirl control valves, HEGO sensor (engine management) Headlamp washer 33 10 Engine control valves 34 10 Injectors 35 5 Active grille shutter (Petrol engine) 35 15 Active grille shutter and filter heater (Diesel engine) 36 10 Powertrain control module (PCM) 37 - Not used 38 15 Powertrain control module (PCM), transmission control module 39 5 Headlamp control module 181 Fuses Fuse Ampere rating 40 5 41 20 Body Control Module 42 15 Rear window wiper Circuits protected Electric power assisted steering 43 15 Headlamp levelling 44 5 Adaptive cruise control 45 10 Heated washer jets 46 25 Electric windows (front) 47 7.5 Heated exterior mirrors 48 15 Vaporizer 182 Fuses Passenger compartment fuse box E129926 Fuse Ampere rating 56 20 Circuits protected Fuel pump supply 183 Fuses Fuse Ampere rating 57 - Not used 58 - Not used 59 5 Passive anti theft system (PATS) supply 60 10 Interior lamps, driver's door switch pack, glove box, ambient lighting, electric sunroof Cigar lighter, rear power outlet Circuits protected 61 20 62 5 Rain sensor module, humidity sensor, auto-dimming mirror 63 10 Adaptive cruise control 64 - 65 10 Luggage compartment lid release 66 20 Driver's door lock, double locking 67 7.5 Information and entertainment display, GPS, BVC 68 15 Steering column lock 69 5 Instrument cluster 70 20 Central locking 71 10 Air conditioning 72 7.5 Steering wheel control module 73 5 Battery back-up sounder (alarm system), onboard diagnostics system 74 15 Main beam Not used 75 15 Front fog lamps 76 10 Reversing lamp 77 20 Washer pump 78 5 Ignition switch or start button 79 15 Radio, hazard and door lock buttons 80 20 Electric sunroof 81 5 Interior motion sensor, RF receiver 184 Fuses Fuse Ampere rating 82 20 Washer pump ground 83 20 Central locking ground 84 20 Driver's door lock and double locking ground 85 7.5 Climate control heater, passenger airbag deactivation switch, heated seats switch, auxiliary heater, manual air conditioning heater module 86 10 Restraint system, passenger airbag deactivation system Circuits protected 87 - Not used 88 - Not used 89 - Not used Load compartment fuse box E129927 Fuse Ampere rating 1 - Circuits protected Not used 2 10 Keyless vehicle module 3 5 Keyless vehicle door handles 4 25 Door module (left-hand front) (electric windows, central locking, electric folding mirrors, heated exterior mirrors) 185 Fuses Fuse Ampere rating Circuits protected 5 25 Door module (right-hand front) (electric windows, central locking, electric folding mirrors, heated exterior mirrors) 6 25 Door module (left-hand rear) (electric windows) 7 25 Door module (right-hand rear) (electric windows) 8 10 Alarm system Electric driver's seat 9 25 10 - Not used 11 - Not used 12 10 Air conditioning module (with start-stop module) 13 5 Instrument cluster (with start-stop module) 14 7.5 Information and entertainment display, GPS module (with start-stop module) 15 15 Audio unit, audio unit control panel (with start-stop module) 16 - Not used 17 - Not used 18 - Not used 19 - Not used 20 - Not used 21 - Not used 22 - Not used 23 - Not used 24 - Not used 25 - Not used 26 40 27 - Not used 28 - Not used Trailer module 186 Fuses Fuse Ampere rating Circuits protected 29 5 Blind spot monitor, lane keeping aid, active city stop, rear view camera (without start-stop module) 30 5 Parking aid module 31 - Not used 32 - Not used 33 - Not used 34 15 Heated driver's seat 35 15 Heated front passenger seat 36 - Not used 37 5 Electric sunroof 38 - Not used 39 - Not used 40 - Not used 41 5 Retractable tow ball 42 - Not used 43 - Not used 44 - Not used 45 - Not used 46 10 Blind spot monitor, lane keeping aid, rear view camera (with start-stop module) 187 Vehicle recovery Rear towing eye TOWING POINTS Towing eye location The screw-in towing eye is located in the spare wheel well. The towing eye must always be carried in the vehicle. Installing the towing eye CAUTION The screw-in towing eye has a left-hand thread. Turn it anti-clockwise to install it. Make sure that the towing eye is fully tightened. Note: On vehicles with a tow bar, the towing eye cannot be installed at the rear of the vehicle. Use the tow bar to tow a vehicle. E78368 Insert a suitable object into the hole on the underside of the cover and prise off the cover. Front towing eye Install the towing eye. TOWING THE VEHICLE ON FOUR WHEELS All vehicles WARNINGS Switch the ignition on when your vehicle is being towed. The steering lock will engage and the direction indicators and brake lamps will not work if you do not. The brake and steering assistance will not operate unless the engine is running. Press the brake pedal harder and allow for increased stopping distances and heavier steering. E78367 188 Vehicle recovery CAUTIONS Too much tension in the tow rope could cause damage to your vehicle or the vehicle that is towing. Select neutral when your vehicle is being towed. In the event of a breakdown or mechanical failure do not use individual axle carriers. Your vehicle must be recovered with either ALL wheels on the ground or transported with ALL wheels lifted clear of the ground on a level platform. Drive off slowly and smoothly without jerking the vehicle that is towing. Vehicles with automatic transmission CAUTIONS If a speed of 20 km/h (12 mph) and a distance of 20 kilometres (12 miles) is to be exceeded ALL wheels must be lifted clear of the ground. It is recommended not to tow with the drive wheels on the ground. However, if it is required to move the vehicle from a dangerous location, do not tow your vehicle faster than 20 km/h (12 mph) or further than 20 kilometres (12 miles). Do not tow your vehicle backwards. In the event of a mechanical failure of the transmission do not use individual axle carriers. ALL wheels must be lifted clear of the ground on a level platform. Do not tow your vehicle if the ambient temperature is below 0°C (32°F). 189 Maintenance Check when refuelling GENERAL INFORMATION • Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford Authorised Repairers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialised tools developed specifically for servicing your vehicle. • • • • In addition to regular servicing, we recommend that you carry out the following additional checks. Engine oil level. See Engine Oil Check (page 198). Brake fluid level. See Brake and Clutch Fluid Check (page 200). Washer fluid level. See Washer Fluid Check (page 200). Tyre pressures (when cold). See Technical Specifications (page 218). Tyre condition. See Wheels and Tyres (page 208). Monthly checks • WARNINGS Switch the ignition off before touching or attempting adjustment of any kind. • • • • • Do not touch the electronic ignition system parts after you have switched the ignition on or when the engine is running. The system operates at high voltage. Engine coolant level (engine cold). See Engine Coolant Check (page 199). Pipes, hoses and reservoirs for leaks. Air conditioning operation. Parking brake operation. Horn operation. Tightness of wheel nuts. See Technical Specifications (page 218). OPENING AND CLOSING THE BONNET Keep your hands and clothing clear of the engine cooling fan. Under certain conditions, the fan may continue to run for several minutes after you have switched the engine off. Opening the bonnet CAUTION When carrying out maintenance checks, make sure that filler caps are fitted securely. Daily checks • • • Exterior lamps. Interior lamps. Warning lamps and indicators. E73698 190 Maintenance E133239 E87786 Move the yellow catch to the right. Open the bonnet and support it with the strut. Closing the bonnet WARNING Make sure that the bonnet is closed properly. Lower the bonnet and allow it to drop from under its own weight for the last 20 – 30 centimetres (8 - 11 inches). 191 Maintenance UNDER BONNET OVERVIEW - 1.6L DURATEC-16V TI-VCT (SIGMA) A B C I D E H F G E130030 * A Engine coolant reservoir : See Engine Coolant Check (page 199). B Brake and clutch fluid reservoir (right-hand drive) : See Brake and Clutch Fluid Check (page 200). C Engine oil filler cap : See Engine Oil Check (page 198). D Brake and clutch fluid reservoir (left-hand drive) : See Brake and Clutch Fluid Check (page 200). E Battery: See Vehicle battery (page 206). F Engine compartment fuse box: See Fuses (page 178). G Air cleaner: No maintenance necessary. H Engine oil dipstick : See Engine Oil Check (page 198). I Screen washer fluid reservoir : See Washer Fluid Check (page 200). * * * * * * For easy identification, filler caps and the engine oil dipstick are marked in colour. 192 Maintenance UNDER BONNET OVERVIEW - 1.6L ECOBOOST SCTI (SIGMA) B A I H C G D E F E132729 A Brake and clutch fluid reservoir (right-hand drive). See Brake and Clutch Fluid Check (page 200). B Engine oil filler cap . See Engine Oil Check (page 198). C Brake and clutch fluid reservoir (left-hand drive). See Brake and Clutch Fluid Check (page 200). D Battery. See Vehicle battery (page 206). E Engine compartment fuse box. See Fuses (page 178). F Air cleaner. No maintenance necessary. G Engine oil dipstick . See Engine Oil Check (page 198). 1 1 193 Maintenance H Screen washer fluid reservoir. See Washer Fluid Check (page 200). I Engine coolant reservoir. See Engine Coolant Check (page 199). 1 The filler caps and the engine oil dipstick are coloured for easy identification. UNDER BONNET OVERVIEW - 1.6L DURATORQ-TDCI (DV) DIESEL A I B C D E F H G E130031 * A Engine coolant reservoir : See Engine Coolant Check (page 199). B Brake and clutch fluid reservoir (right-hand drive) : See Brake and Clutch Fluid Check (page 200). C Engine oil filler cap : See Engine Oil Check (page 198). D Brake and clutch fluid reservoir (left-hand drive) : See Brake and Clutch Fluid Check (page 200). E Battery: See Vehicle battery (page 206). * * * 194 Maintenance F Engine compartment fuse box: See Fuses (page 178). G Air cleaner: No maintenance necessary. H Engine oil dipstick : See Engine Oil Check (page 198). I Screen washer fluid reservoir : See Washer Fluid Check (page 200). * * * For easy identification, filler caps and the engine oil dipstick are marked in colour. UNDER BONNET OVERVIEW - 2.0L DURATEC-HE (MI4) A I B C H D E G E139960 195 F Maintenance * A Engine coolant reservoir : See Engine Coolant Check (page 199). B Brake and clutch fluid reservoir (right-hand drive) : See Brake and Clutch Fluid Check (page 200). C Engine oil filler cap : See Engine Oil Check (page 198). D Brake and clutch fluid reservoir (left-hand drive) : See Brake and Clutch Fluid Check (page 200). E Battery: See Vehicle battery (page 206). * * * F Engine compartment fuse box: See Fuses (page 178). G Air cleaner: No maintenance necessary. H Engine oil dipstick : See Engine Oil Check (page 198). I Screen washer fluid reservoir : See Washer Fluid Check (page 200). * * * For easy identification, filler caps and the engine oil dipstick are marked in colour. 196 Maintenance UNDER BONNET OVERVIEW - 2.0L DURATORQ-TDCI (DW) DIESEL A I B C D E F H G E130032 * A Engine coolant reservoir : See Engine Coolant Check (page 199). B Brake and clutch fluid reservoir (right-hand drive) : See Brake and Clutch Fluid Check (page 200). C Engine oil dipstick : See Engine Oil Check (page 198). D Brake and clutch fluid reservoir (left-hand drive) : See Brake and Clutch Fluid Check (page 200). E Battery: See Vehicle battery (page 206). * * * F Engine compartment fuse box: See Fuses (page 178). G Air cleaner: No maintenance necessary. H Engine oil filler cap : See Engine Oil Check (page 198). I Screen washer fluid reservoir : See Washer Fluid Check (page 200). * * * For easy identification, filler caps and the engine oil dipstick are marked in colour. 197 Maintenance ENGINE OIL DIPSTICK - 2.0L DURATEC-HE (MI4) ENGINE OIL DIPSTICK - 1.6L DURATEC-16V TI-VCT (SIGMA) A B A E95540 B E134040 A MIN A MIN B MAX B MAX ENGINE OIL DIPSTICK - 1.6L ECOBOOST SCTI (SIGMA) A ENGINE OIL DIPSTICK - 1.6L DURATORQ-TDCI (DV) DIESEL/2.0L DURATORQ-TDCI (DW) DIESEL B A E134114 B E95543 A MIN A MIN B MAX B MAX ENGINE OIL CHECK CAUTION Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine. 198 Maintenance Note: The oil consumption of new engines reaches its normal level after approximately 5000 kilometres (3000 miles). ENGINE COOLANT CHECK Checking the coolant level Checking the oil level WARNING Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. CAUTION Make sure that the level is between the MIN and the MAX marks. Note: Check the level before starting the engine. CAUTION Make sure that the level is between the MIN and the MAX marks. Note: Make sure that your vehicle is on level ground. Note: Oil expands when it is hot. The level may therefore extend a few millimetres beyond the MAX mark. Note: Coolant expands when it is hot. The level may therefore extend beyond the MAX mark. Remove the dipstick and wipe it with a clean, lint free cloth. Replace the dipstick and remove it again to check the oil level. If the level is at the MIN mark, top up immediately. Topping up If the level is at the MIN mark, top up immediately. WARNINGS Only top up when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down. Topping up WARNINGS Only top up when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down. Do not remove the filler cap when the engine is running. Do not remove the filler cap when the engine is hot. Wait for the engine to cool down. Do not remove the filler cap when the engine is running. Undiluted coolant is flammable and may ignite if spilt on a hot exhaust. Remove the filler cap. CAUTION Do not top up further than the MAX mark. CAUTIONS In an emergency, you can add just water to the cooling system to reach a vehicle service station. Have the system checked by a properly trained technician as soon as possible. Top up with fluid that meets the Ford specification. See Technical Specifications (page 201). Replace the filler cap. Turn it until you feel a strong resistance. 199 Maintenance CAUTIONS Prolonged use of incorrect dilution of the coolant can cause engine damage from corrosion, overheating or freezing. WARNINGS If the level is at the MIN mark, have the system checked by a properly trained technician as soon as possible. Unscrew the cap slowly. Any pressure will escape slowly as you unscrew the cap. Note: Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. CAUTION Do not top up further than the MAX mark. Note: The brake and the clutch systems are supplied from the same reservoir. Top up with fluid that meets the Ford specification. See Technical Specifications (page 201). Top up with a 50/50 mixture of coolant and water using fluid that meets the Ford specification. See Technical Specifications (page 201). WASHER FLUID CHECK BRAKE AND CLUTCH FLUID CHECK Note: The front and rear washer systems are supplied from the same reservoir. When topping up, use a mixture of washer fluid and water to help prevent freezing in cold weather and improve the cleaning capability. We recommend that you use only high quality washer fluid. WARNINGS Use of any fluid other than the recommended brake fluid may reduce brake efficiency and not meet Ford's performance standards. For information on fluid dilution, refer to the product instructions. Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. 200 Maintenance TECHNICAL SPECIFICATIONS Vehicle fluids CAUTION Do not use fluids which do not meet the specifications or requirements defined. Use of unsuitable fluids may lead to damage which is not covered by your Warranty. Item Specification Engine oil - petrol and diesel engines Recommended fluid WSS-M2C913-C Castrol or Ford Engine Oil Alternative engine oil petrol engines only WSS-M2C925-B Castrol Engine Oil Antifreeze WSS-M97B44-D Motorcraft SuperPlus Antifreeze Brake fluid WSS-M6C65-A2 or ISO 4925 Class 6 Motorcraft or Ford DOT 4 LV High Performance Brake Fluid Your engine has been designed to be used with Castrol and Ford Engine Oil, which gives a fuel economy benefit whilst maintaining the durability of your engine. For petrol engines only, Ford and Castrol have developed a low friction SAE-5W-20 oil which offers further fuel economy benefits over the standard SAE-5W-30 oil. If this oil is not available, we recommend that you service with oil to specification WSS-M2C913-C. Topping up the oil: If you are unable to find an oil that meets the specification defined by WSS-M2C913-C or WSS-M2C925-B (petrol engines only), you must use SAE 5W-30 that meets the specification defined by ACEA A5/B5. Using topping up oils other than the one specified can result in longer engine cranking periods, reduced engine performance, reduced fuel economy and increased emission levels. Castrol engine oil recommended. E115472 201 Maintenance Capacities Variant Item Capacity in Litres (gallons) Vehicles with a petrol engine Fuel tank 55 (12.1) 1.6L Duratorq-TDCi - DV Fuel tank 53 (11.7) 2.0L Duratorq-TDCi - DW Fuel tank 60 (13.2) All Windscreen washer system - with headlamp washers 4.5 (1) All Windscreen washer system - without headlamp washers 3 (0.7) 1.6L Duratec-16V Ti-VCT Sigma Engine oil - with filter 1.6L Duratec-16V Ti-VCT Sigma Engine oil - without filter 1.6L Duratec-16V Ti-VCT Sigma Cooling system 1.6L EcoBoost - Sigma Engine oil - with filter 1.6L EcoBoost - Sigma Engine oil - without filter 4.1 (0.9) 3.75 (0.8) approx. 5.8 (1.3) 4.1 (0.9) 3.75 (0.8) 1.6L EcoBoost - Sigma Cooling system 2.0L Duratec-HE - MI4 Engine oil - with filter 2.0L Duratec-HE - MI4 Engine oil - without filter 2.0L Duratec-HE - MI4 Cooling system 1.6L Duratorq-TDCi - DV Engine oil - with filter 3.8 (0.8) 1.6L Duratorq-TDCi - DV Engine oil - without filter 3.5 (0.8) 1.6L Duratorq-TDCi - DV Cooling system 2.0L Duratorq-TDCi - DW Engine oil - with filter 5.7 (1.3) 2.0L Duratorq-TDCi - DW Engine oil - without filter 5.4 (1.2) 2.0L Duratorq-TDCi - DW Cooling system 202 approx. 6.3 (1.4) 4.3 (1) 3.9 (0.9) approx. 6.5 (1.4) approx. 7.3 (1.6) approx. 8.5 (1.9) Maintenance Engine oil top up capacities Engine Capacity in litres (gallons) 1.6L Duratec-16V Ti-VCT - Sigma 0.8 (0.2) 1.6L EcoBoost - Sigma 0.8 (0.2) 2.0L Duratec-HE - MI4 0.9 (0.2) 1.6L Duratorq-TDCi - DV 1.6 (0.4) 2.0L Duratorq-TDCi - DW 1.8 (0.4) 203 Vehicle Care Cleaning the chrome trim CLEANING THE EXTERIOR CAUTION WARNING Do not use abrasives or chemical solvents. Use soapy water. If you use a car wash with a waxing cycle, make sure that you remove the wax from the windscreen. Body paintwork preservation CAUTIONS Prior to using a car wash facility check the suitability of it for your vehicle. CAUTIONS Do not polish your vehicle in strong sunshine. Some car wash installations use water at high pressure. This could damage certain parts of your vehicle. Do not allow polish to touch plastic surfaces. It could be difficult to remove. Remove the aerial before using an automatic car wash. Do not apply polish to the windscreen or rear window. This could cause the wipers to become noisy and they may not clear the window properly. Switch the heater blower off to prevent contamination of the fresh air filter. We recommend that you wax the paintwork once or twice a year. We recommend that you wash your vehicle with a sponge and lukewarm water containing a car shampoo. CLEANING THE INTERIOR Cleaning the headlamps Seat belts CAUTIONS Do not scrape the headlamp lenses or use abrasives, alcoholic solvents or chemical solvents to clean them. WARNINGS Do not use abrasives, or chemical solvents to clean them. Do not wipe the headlamps when they are dry. Do not allow moisture to penetrate the seat belt retractor mechanism. Clean the seat belts with interior cleaner or water applied with a soft sponge. Let the seat belts dry naturally, away from artificial heat. Cleaning the rear window CAUTION Do not scrape the inside of the rear window or use abrasives or chemical solvents to clean it. Use a clean, lint free cloth or a damp chamois leather to clean the inside of the rear window. 204 Vehicle Care Instrument cluster screens, LCD screens, radio screens WARNING Do not use abrasives, alcoholic solvents or chemical solvents to clean them. Rear windows CAUTIONS Do not use any abrasive materials to clean the interior of the rear windows. Do not install stickers or labels to the interior of the rear windows. REPAIRING MINOR PAINT DAMAGE CAUTION Remove apparently harmless looking substances from the paintwork immediately (e.g. bird droppings, tree resins, insect remains, tar spots, road salt and industrial fall out). You should repair paintwork damage caused by stones from the road or minor scratches as soon as possible. A choice of products is available from your Ford Dealer. Read and follow the manufacturer’s instructions. 205 Vehicle battery To connect the booster cables JUMP-STARTING THE VEHICLE WARNING Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. A CAUTIONS Connect batteries with only the same nominal voltage. Always use booster cables with insulated clamps and adequate size cable. C D Do not disconnect the battery from the vehicle’s electrical system. B E102925 1. A Flat battery vehicle B Booster battery vehicle C Positive connection cable D Negative connection cable Position the vehicles so that they do not touch one another. 2. Switch off the engine and any electrical equipment. 3. Connect the positive (+) terminal of vehicle B with the positive (+) terminal of vehicle A (cable C). 4. Connect the negative (-) terminal of vehicle B to the ground connection of vehicle A (cable D). See Battery connection points (page 207). 206 Vehicle battery BATTERY CONNECTION POINTS CAUTIONS Do not connect to the negative (–) terminal of the flat battery. CAUTION Make sure that the cables are clear of any moving parts and fuel delivery system parts. Do not connect to the negative (–) terminal of the flat battery. To start the engine 1. Run the engine of vehicle B at moderately high speed. 2. Start the engine of vehicle A. 3. Run both vehicles for a minimum of three minutes before disconnecting the cables. CAUTION Do not switch on the headlamps when disconnecting the cables. The peak voltage could blow the bulbs. E130431 Disconnect the cables in the reverse order. The ground connection point is located to the right of the battery near the engine compartment fuse box. CHANGING THE VEHICLE BATTERY CAUTION For vehicles with Start-stop the battery requirement is different. It must be replaced by one of exactly the same specification as the original. Note: Where applicable, the audio system must be reprogrammed with the keycode. The battery is located in the engine compartment. See Maintenance (page 190). 207 Wheels and Tyres Refer to the following information before changing the road wheel. GENERAL INFORMATION CAUTIONS Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. WARNINGS Drive the shortest possible distances. Do not fit more than one spare wheel on your vehicle at any one time. If you change the diameter of the tyres from that fitted at the factory, the speedometer may not display the correct speed. Take the vehicle to your dealer to have the engine management system reprogrammed. Do not carry out any tyre repairs on a spare wheel. Do not drive through an automatic car wash. If you are unsure what type of spare wheel you have do not exceed 80 km/h (50 mph). If you intend to change the size of the wheels from that fitted at the factory, check the suitability with your dealer. Only fit snow chains to specified tyres. See Technical Specifications (page 218). Note: Check your tyre pressures regularly to optimise fuel economy. A decal with tyre pressure data is located in the driver’s door opening at the B-pillar. CAUTION Check and set the tyre pressure at the ambient temperature in which you are intending to drive the vehicle and when the tyres are cold. The ground clearance of your vehicle may be reduced. Take care when parking next to a kerb. CHANGING A ROAD WHEEL Note: Your vehicle may exhibit some unusual driving characteristics. Locking wheel nuts Vehicle jack You can obtain a replacement locking wheel nut key and replacement locking wheel nuts from your dealer using the reference number certificate. WARNINGS The vehicle jack supplied with your vehicle should only be used when changing a wheel in emergency situations. Vehicles with a spare wheel Before using the vehicle jack, check that it is not damaged or deformed and that the thread is lubricated and free from foreign matter. If the spare wheel is exactly the same type and size as the other fitted road wheels, you can replace the existing road wheel with the spare wheel and continue to drive in the normal manner. Never place anything between the jack and the ground, or the jack and the vehicle. If the spare wheel is different to the other road wheels, it will carry a yellow label with the appropriate speed limit. 208 Wheels and Tyres Note: Vehicles with a tyre repair kit are not equipped with a vehicle jack or a wheel brace. Vehicles without tyre repair kit Your vehicle jack, wheel brace, screw-in towing eye and wheel trim remover are located in the spare wheel well. It is recommended to use a workshop type hydraulic jack for changing between summer and winter tyres. Jacking and lifting points Note: Use a jack with a minimum lifting capacity of 1.5 tonnes and a lifting plate with a minimum diameter of 80 millimetres (3.1 inches). CAUTION Use only the specified jacking points. If you use other positions, you may damage the body, steering, suspension, engine, braking system or the fuel lines. A B E92658 A Emergency use only B Maintenance 209 Wheels and Tyres Assembling the wheel brace A Type one WARNING When returning the wheel brace extension to its original position, take care not to get your fingers caught. Note: Make sure that the wheel brace is fully extended. E93302 Small arrow-shaped marks on the sills A show the location of the jacking points. E122546 Extend the wheel brace. Type two CAUTION The screw-in towing eye has a left-hand thread. Turn it anti-clockwise to install it. Make sure that the towing eye is fully tightened. E92932 E122502 Insert the screw-in towing eye into the wheel brace. E93020 210 Wheels and Tyres Removing the wheel trim WARNINGS If your vehicle has a manual transmission, select first or reverse gear. If it has an automatic transmission, select park. Type one Insert the flat end of the wheel brace between the rim and the trim and carefully remove the trim. Have the passengers leave the vehicle. Type two Secure the diagonally opposite wheel with an appropriate block or wheel chock. Make sure that the arrows on directional tyres point in the direction of rotation when the vehicle is moving forwards. If you have to fit a spare wheel with the arrows pointing in the opposite direction, have the tyre refitted in the correct direction by a properly trained technician. 1 2 Do not work underneath the vehicle when it is supported only by a jack. Make sure that the jack is vertical to the jacking point and the base is flat on the ground. E122314 CAUTION 1. Insert the wheel trim remover. 2. Remove the wheel trim. Note: Make sure that you pull the wheel trim remover at right angles to the trim. Do not lay alloy wheels face down on the ground, this will damage the paint. Note: The spare wheel is located under the floor cover in the luggage compartment. Removing a road wheel 1. WARNINGS Park your vehicle in such a position that neither the traffic nor you are hindered or endangered. Set up a warning triangle. Make sure that the vehicle is on firm, level ground with the wheels pointing straight ahead. Switch off the ignition and apply the parking brake. 211 Install the locking wheel nut key. Wheels and Tyres CAUTION Do not install alloy wheels using wheel nuts designed for use with steel wheels. Note: The wheel nuts of alloy wheels and spoked steel wheels can also be used for the steel spare wheel for a short time (maximum two weeks). 1 Note: Make sure the wheel and hub contact surfaces are free from foreign matter. Note: Make sure that the cones on the wheel nuts are against the wheel. 1. Install the wheel. 2. Install the wheel nuts finger tight. 3. Install the locking wheel nut key. 2 1 E121887 4 3 2. Slacken the wheel nuts. 3. Jack up the vehicle until the tyre is clear of the ground. 4. Remove the wheel nuts and the wheel. Installing a road wheel 5 WARNINGS Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. See Technical Specifications (page 218). 2 E75442 4. Partially tighten the wheel nuts in the sequence shown. 5. Lower the vehicle and remove the jack. 6. Fully tighten the wheel nuts in the sequence shown. See Technical Specifications (page 218). 7. Install the wheel trim using the ball of your hand. Do not fit run flat tyres on vehicles that were not originally fitted with them. Please contact your dealer for more details regarding compatibility. 212 Wheels and Tyres • WARNING Have the wheel nuts checked for tightness and the tyre pressure checked as soon as possible. • TYRE REPAIR KIT Your vehicle may not have a spare tyre. In this case it will have an emergency tyre repair kit that can be used to repair one flat tyre. • The tyre repair kit is located in the spare wheel well. • General information • WARNINGS Depending on the type and extent of tyre damage, some tyres can only be partially sealed or not sealed at all. Loss of tyre pressure can affect vehicle handling, leading to loss of vehicle control. Drive with caution and avoid making sudden steering or driving manoeuvres, especially if the vehicle is heavily loaded or you are towing a trailer. The kit will provide you with an emergency temporary repair, enabling you to continue your journey to the next vehicle or tyre dealer, or to drive a maximum distance of 200 kilometres (125 miles). Do not exceed a maximum speed of 80 km/h (50 mph). Keep the kit out of the reach of children. Only use the kit when the ambient temperature is between –30°C (-22°F) and +70°C (+158°F). Using the tyre repair kit WARNINGS Compressed air can act as an explosive or propellant. Do not use the tyre repair kit if the tyre has already been damaged as a result of being driven under inflated. Never leave the tyre repair kit unattended while in use. Do not use the tyre repair kit on run flat tyres. CAUTION Do not try to seal damage other than that located within the visible tread of the tyre. Do not keep the compressor operating for more than 10 minutes. Do not try to seal damage to the tyre’s sidewall. Note: Use the tyre repair kit only for the vehicle with which it was supplied. The tyre repair kit seals most tyre punctures [with a diameter of up to six millimetres (1/4 inch)] to temporarily restore mobility. • Observe the following rules when using the kit: • • 213 Park your vehicle at the roadside so that you do not obstruct the flow of traffic and so that you are able to use the kit without being in danger. Apply the parking brake, even if you have parked on a level road, to make sure that the vehicle will not move. Do not attempt to remove foreign objects like nails or screws penetrating the tyre. Wheels and Tyres • • • Leave the engine running while the kit is in use, but not if the vehicle is in an enclosed or poorly ventilated area (for example, inside a building). In these circumstances, switch the compressor on with the engine turned off. Replace the sealant bottle with a new one before the expiry date (see top of bottle) is reached. Inform all other users of the vehicle that the tyre has been temporarily sealed with the tyre repair kit and make them aware of the special driving conditions to be observed. CAUTION Screwing the bottle onto the bottle holder will pierce the seal of the bottle. Do not unscrew the bottle from the holder as the sealant will escape. A K B J Inflating the tyre WARNINGS Check the sidewall of the tyre prior to inflation. If there are any cracks, bumps or similar damage, do not attempt to inflate the tyre. Do not stand directly beside the tyre while the compressor is pumping. I Watch the sidewall of the tyre. If any cracks, bumps or similar damage appear, turn off the compressor and let the air out by means of the pressure relief valve B. Do not continue driving with this tyre. H C D The sealant contains natural rubber latex. Avoid contact with skin and clothing. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. E94973 If the tyre inflation pressure does not reach 1.8 bar (26 psi) within seven minutes, the tyre may have suffered excessive damage, making a temporary repair impossible. In this case, do not continue driving with this tyre. 214 G F A Protective cap B Pressure relief valve C Hose D Orange cap E Bottle holder F Pressure gauge E Wheels and Tyres G Power plug with cable H Compressor switch I Label J Bottle lid K Sealant bottle 13. Remove the power plug G from the cigar lighter socket or auxiliary power socket. 14. Quickly unscrew the hose C from the tyre valve and replace the protective cap A. Fasten the valve cap again. 15. Leave the sealant bottle K in the bottle holder E. 16. Make sure the kit, the bottle lid and the orange cap are stored safely, but still easily accessible in the vehicle. The kit will be required again when you check the tyre pressure. 17. Immediately drive approximately three kilometres (two miles) so that the sealant can seal the damaged area. Note: When pumping in the sealant through the tyre valve, the pressure may rise up to 6 bar (87 psi) but will drop again after about 30 seconds. 1. Open the lid of the tyre repair kit. 2. Peel off the label I showing the maximum permissible speed of 80 km/h (50 mph) from the casing and attach it to the instrument panel in the driver’s field of view. Make sure the label does not obscure anything important. 3. Take the hose C and the power plug with cable G out of the kit. 4. Unscrew the orange cap D and the bottle lid J. 5. Screw the sealant bottle K clockwise into the bottle holder E fully tight. 6. Remove the valve cap from the damaged tyre. 7. Detach the protective cap A from the hose C and screw the hose C firmly onto the valve of the damaged tyre. 8. Make sure that the compressor switch H is in position 0. 9. Insert the power plug G into the cigar lighter socket or auxiliary power socket. See Cigar Lighter (page 111). See Auxiliary Power Points (page 111). 10. Start the engine. 11. Move the compressor switch H to position 1. 12. Inflate the tyre for no longer than seven minutes to an inflation pressure of minimum 1.8 bar (26 psi) and a maximum of 3.5 bar (51 psi). Move the compressor switch H to position 0 and check the current tyre pressure with pressure gauge F. WARNING If you experience heavy vibrations, unsteady steering behaviour or noises while driving, reduce your speed and drive with caution to a place where it is safe for you to stop the vehicle. Recheck the tyre and its pressure. If the tyre pressure is less than 1.3 bar (19 psi) or if there are any cracks, bumps or similar damage visible, do not continue driving with this tyre. Checking the tyre pressure 1. Stop the vehicle after driving approximately three kilometres (two miles). Check, and where necessary, adjust the pressure of the damaged tyre. 2. Attach the kit and read the tyre pressure from the pressure gauge F. 215 Wheels and Tyres 3. If the pressure of the sealant-filled tyre is 1.3 bar (19 psi) or more, adjust it to the specified pressure. See Technical Specifications (page 218). 4. Follow the inflation procedure once again to top up the tyre. 5. Check the tyre pressure again from the pressure gauge F. If the tyre pressure is too high, deflate the tyre to the specified pressure using the pressure relief valve B. 6. Once you have inflated the tyre to its correct tyre pressure, move the compressor switch H to position 0, remove the power plug G from the socket, unscrew the hose C, fasten the valve cap and replace the protective cap A. 7. Leave the sealant bottle K in the bottle holder E and store the kit away safely in its original location. 8. Drive to the nearest tyre specialist to get the damaged tyre replaced. Before the tyre is removed from the rim, inform your tyre dealer that the tyre contains sealant. Renew the kit as soon as possible after it has been used once. Note: Remember that emergency roadside tyre repair kits only provide temporary mobility. Regulations concerning tyre repair after usage of tyre repair kit may differ from country to country. You should consult a tyre specialist for advice. Empty sealant bottles can be disposed of together with normal household waste. Return remains of sealant to your dealer or dispose of it in compliance with local waste disposal regulations. TYRE CARE E70415 To make sure the front and rear tyres of your vehicle wear evenly and last longer, we recommend that you swap the tyres from front to rear and vice versa at regular intervals of between 5000 and 10000 kilometres (3000 and 6000 miles). CAUTION Do not scrub the sidewalls of the tyres when you are parking. If you have to mount a kerb, do so slowly and approach it with the wheels at right-angles to the kerb. Examine the tyres regularly for cuts, foreign objects and uneven wear of the tread. Uneven wear could mean that the wheel alignment is outside specification. WARNING Before driving, make sure the tyre is adjusted to the recommended inflation pressure. See Technical Specifications (page 218). Monitor the tyre pressure until the sealed tyre is replaced. Check the tyre pressures (including the spare) when cold, every two weeks. 216 Wheels and Tyres TYRE PRESSURE MONITORING SYSTEM USING WINTER TYRES CAUTION WARNINGS The system does not relieve you of your responsibility to regularly check the tyre pressures. Make sure that you use the correct wheel nuts for the type of wheel the winter tyres are fitted to. If winter tyres are used, make sure that the tyre pressures are correct. See Technical Specifications (page 218). The system will only provide a low tyre pressure warning. It will not inflate the tyres. Do not drive on significantly under-inflated tyres. This may cause the tyres to overheat and fail. Under-inflation reduces fuel efficiency, tyre tread life and may also affect your ability to drive the vehicle safely. USING SNOW CHAINS WARNINGS Do not exceed 50 km/h (30 mph). Do not use snow chains on snow-free roads. CAUTIONS Do not bend or damage the valves when you are inflating the tyres. Only fit snow chains to specified tyres. See Technical Specifications (page 218). Have tyres installed by properly trained technicians. CAUTION The Deflation Detection System will alert you if there is a change of air pressure in any tyre. It does this by using the ABS sensors to detect the rolling circumference of the wheels. When the circumference changes, this indicates low pressure in a tyre, a warning message is displayed in the information display and the message indicator will illuminate. See Information Messages (page 83). If your vehicle is fitted with wheel trims, remove them before fitting snow chains. Note: The ABS will continue to operate normally. Only use small link snow chains. Only use snow chains on the front wheels. If a low pressure warning message is displayed in the information display, check the tyre pressures as soon as possible and inflate them to the recommended pressure. See Technical Specifications (page 218). Vehicles with stability control (ESP) Vehicles with stability control (ESP) may exhibit some unusual driving characteristics which can be reduced by switching traction control off. See Using Stability Control (page 133). If this happens frequently, have the cause determined and rectified as soon as possible. 217 Wheels and Tyres System reset Apart from a too low tyre pressure or a damaged tyre, the following situations can affect the rolling circumference: • Vehicle load is uneven. • When using a trailer or travelling up and down an incline. • Using snow chains. • Driving on soft surfaces such as snow or mud. Note: Do not reset the system when the vehicle is moving. Note: You should reset the system following any adjustment to the tyre pressures or any changing of tyres. Note: Turn the ignition on. 1. Using the information display control, navigate to Settings > Driver assist > Deflation detection 2. Press and hold the OK button until confirmation appears. Note: The system will still function correctly, but there may be an increased detection time. TECHNICAL SPECIFICATIONS Wheel nut torque Wheel type Nm (Ib-ft) All 130 (96) Tyre pressures (cold tyres) Up to 80 km/h (50 mph) Normal load Variant Tyre size Full load Front Rear Front Rear bar (lbf/ in²) bar (lbf/ in²) bar (lbf/ in²) bar (lbf/ in²) All T125/80 R 16 4.2 (61) 4.2 (61) 4.2 (61) 4.2 (61) All T125/90 R 16 4.2 (61) 4.2 (61) 4.2 (61) 4.2 (61) 218 Wheels and Tyres Up to 160 km/h (100 mph) Normal load Variant Tyre size Full load Front Rear Front Rear bar (psi) bar (psi) bar (psi) bar (psi) * 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) All 205/55 R 16 1.6L Duratec-16V TiVCT - Sigma, 1.6L EcoBoost - Sigma, 2.0L Duratec-HE MI4, 1.6L DuratorqTDCi - DV 215/55 R 16 * 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) 2.0L Duratorq-TDCi - DW 215/55 R 16 * 2.3 (33) 2.1 (31) 2.4 (35) 2.8 (41) 1.6L Duratec-16V TiVCT - Sigma, 1.6L EcoBoost - Sigma, 2.0L Duratec-HE MI4, 1.6L DuratorqTDCi - DV 215/50 R 17 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) 2.0L Duratorq-TDCi - DW 215/50 R 17 2.3 (33) 2.1 (31) 2.4 (35) 2.8 (41) 1.6L Duratec-16V TiVCT - Sigma, 1.6L EcoBoost - Sigma, 2.0L Duratec-HE MI4, 1.6L DuratorqTDCi - DV 235/40 R 18 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) 2.0L Duratorq-TDCi - DW 235/40 R 18 2.3 (33) 2.1 (31) 2.4 (35) 2.8 (41) * Only fit snow chains to specified tyres. 219 Wheels and Tyres Continuous speed in excess of 160 km/h (100 mph) Normal load Variant Tyre size Full load Front Rear Front Rear bar (psi) bar (psi) bar (psi) bar (psi) 1.6L Duratec-16V TiVCT - Sigma, 1.6L Duratorq-TDCi - DV 205/55 R 16 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) 1.6L EcoBoost Sigma, 205/55 R 16 2.2 (32) 2.1 (31) 2.4 (35) 2.8 (41) 1.6L Duratec-16V TiVCT - Sigma, 1.6L EcoBoost - Sigma, 2.0L Duratec-HE MI4, 1.6L DuratorqTDCi - DV 215/55 R 16 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) 2.0L Duratorq-TDCi - DW 215/55 R 16 2.3 (33) 2.1 (31) 2.6 (38) 2.8 (41) 1.6L Duratec-16V TiVCT - Sigma, 1.6L EcoBoost - Sigma, 2.0L Duratec-HE MI4, 1.6L DuratorqTDCi - DV 215/50 R 17 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) 2.0L Duratorq-TDCi - DW 215/50 R 17 2.3 (33) 2.1 (31) 2.6 (38) 2.8 (41) 1.6L Duratec-16V TiVCT - Sigma, 1.6L EcoBoost - Sigma, 2.0L Duratec-HE MI4, 1.6L DuratorqTDCi - DV 235/40 R 18 2.1 (31) 2.1 (31) 2.4 (35) 2.8 (41) 2.0L Duratorq-TDCi - DW 235/40 R 18 2.3 (33) 2.1 (31) 2.6 (38) 2.8 (41) 220 Vehicle identification Note: The vehicle identification plate design may vary to that shown. VEHICLE IDENTIFICATION PLATE B C Note: The information shown on the vehicle identification plate is dependant upon market requirements. D E F G A H I E135662 A Model B Variant C Engine designation D Emission level E Vehicle identification number F Gross vehicle weight G Gross train weight H Maximum front axle weight I Maximum rear axle weight The vehicle identification number and maximum weights are shown on a plate located on the lock side of the right-hand door aperture at the bottom. 221 Vehicle identification VEHICLE IDENTIFICATION NUMBER E87496 The vehicle identification number is stamped into the floor panel on the right-hand side, beside the front seat. It is also shown on the left-hand side of the instrument panel. 222 Capacities and Specifications TECHNICAL SPECIFICATIONS Vehicle dimensions 4-door Dimension description Dimension in mm (inches) Maximum length 4534 (178.5) Overall width including exterior mirrors 2010 (79.1) Overall height - EC kerb weight 1451 - 1484 (57.1 - 58.4) Wheelbase 2648 (104.3) Front track 1544 - 1559 (60.8 - 61.4) Rear track 1534 - 1549 (60.4 - 61) 5-door Dimension description Dimension in mm (inches) Maximum length 4358 - 4412 (171.6 - 173.7) Overall width including exterior mirrors 2010 (79.1) Overall height - EC kerb weight 1451 - 1484 (57.1 - 58.4) Wheelbase 2648 (104.3) Front track 1544 - 1559 (60.8 - 61.4) Rear track 1534 - 1549 (60.4 - 61) Estate Dimension description Dimension in mm (inches) Maximum length 4556 - 4606 (179.4 - 181.3) Overall width including exterior mirrors 2010 (79.1) Overall height - EC kerb weight 1472 - 1505 (58 - 59.3) Wheelbase 2648 (104.3) Front track 1544 - 1559 (60.8 - 61.4) 223 Capacities and Specifications Dimension description Dimension in mm (inches) Rear track 1534 - 1549 (60.4 - 61) Towing equipment dimensions A B C E D F G E132737 224 Capacities and Specifications 4-door Item Dimension description Dimension in mm (inches) A Bumper – centre of tow ball 77 - 80 (3 - 3.1) B Attachment point – centre of tow ball C Wheel centre – centre of tow ball D Centre of tow ball – side member 518 (20.4) E Distance between side members 1037 (40.8) F Centre of tow ball – centre 1. attachment point 450 (17.7) G Centre of tow ball – centre 2. attachment point 750 (29.5) 5 (0.2) 1068 - 1071 (42 - 42.2) 5-door Item Dimension description A Bumper – centre of tow ball Dimension in mm (inches) 81 - 83 (3.2 - 3.3) B Attachment point – centre of tow ball C Wheel centre – centre of tow ball 896 - 898 (35.3 - 35.4) 5 (0.2) D Centre of tow ball – side member 518 (20.4) E Distance between side members 1036 (40.8) F Centre of tow ball – centre 1. attachment point 420 (16.5) G Centre of tow ball – centre 2. attachment point 720 (28.3) Estate Item Dimension description A Bumper – centre of tow ball B Attachment point – centre of tow ball C Wheel centre – centre of tow ball Dimension in mm (inches) 81 (3.2) 225 76 (3) 1094 (43.1) Capacities and Specifications Item Dimension description Dimension in mm (inches) D Centre of tow ball – side member 590 (23.2) E Distance between side members 1179 (46.4) F Centre of tow ball – centre 1. attachment point 474 (18.7) G Centre of tow ball – centre 2. attachment point 719 (28.3) 226 Audio introduction IMPORTANT AUDIO INFORMATION WARNINGS Due to technical incompatibility, recordable (CD-R) and rewritable (CD-RW) discs may not function correctly. E66257 Disc labels Audio CD These CD radio units will play compact discs that conform to the International Red Book standard audio specification. Copy protected CDs from some manufacturers do not conform to this standard and playback cannot be guaranteed. Dual format, dual sided discs (DVD Plus, CD-DVD format), adopted by the music industry, are thicker than normal CDs and consequently playback cannot be guaranteed, and jamming could occur. Irregular shaped CDs and CDs with a scratch protection film or self adhesive labels attached should not be used. Warranty claims, where this type of disc is found to be inside an audio unit returned for repair, will not be accepted. E66254 MP3 All CD units are designed to play commercially pressed 12 cm audio compact discs only. E66255 The audio unit may be damaged if unsuitable items like credit cards or coins are pushed inside the CD aperture. Audio unit labels E66256 227 Audio unit overview Note: Units have an integrated multi function display situated above the CD aperture. This shows important information regarding control of your audio unit. Additionally, there are various icons placed around the display screen which light up when a function is active (for example CD, Radio or Aux.) Type 1 A B C D E O F N M L G K J I H E130324 A CD eject. See Compact disc player (page 240). B Navigation arrows. C CD aperture. See Compact disc player (page 240). D OK. E Information. F Traffic announcement. See Traffic information control (page 236). G Station presets. See Station preset buttons (page 236). 228 Audio unit overview H Seek up. CD track selection. See Station tuning control (page 235). See Track selection (page 240). I On/off and volume control. J Seek down. CD track selection. See Station tuning control (page 235). See Track selection (page 240). K Menu select. L Sound button. See Sound button (page 235). M Auxiliary select. See Auxiliary input (AUX IN) socket (page 113). See Auxiliary input (AUX IN) socket (page 243). N Radio and waveband select. See Audio unit operation (page 235). O CD select. See Compact disc player (page 240). Type 2 1 E104157 A 2 3 4 A Descriptions for function buttons 1-4 229 Audio unit overview A B C D E F T S G R Q H P O N M L K J I E130142 A CD eject. See Compact disc player (page 240). B Navigation arrows. C CD aperture. See Compact disc player (page 240). D OK. E Information. F Traffic announcement. See Traffic information control (page 236). G Sound button. See Sound button (page 235). H Telephone keypad and station presets. See Using the telephone (page 246). See Station preset buttons (page 236). I Function 4. J Function 3. K Seek up. CD track selection. See Station tuning control (page 235). See Track selection (page 240). 230 Audio unit overview L On/off and volume control. M Seek down. CD track selection. See Station tuning control (page 235). See Track selection (page 240). N Function 2. O Function 1. P Menu select. Q Phone menu. See Telephone (page 245). R Auxiliary, USB and iPod select. See Auxiliary input (AUX IN) socket (page 113). See Auxiliary input (AUX IN) socket (page 243). See Connectivity (page 265). S Radio and waveband select. See Audio unit operation (page 235). T CD select. See Compact disc player (page 240). Type 3 Function buttons 1 to 4 are context dependent, and change according to the current unit mode. Descriptions for the functions are shown at the bottom of the screen display. 1 E104157 A 231 2 3 4 A Descriptions for function buttons 1-4 Audio unit overview A B C D E F G Y X H W I V J U K T L S R Q P O N M E129074 A On/off control. B Display select. C Telephone keypad and station presets. See Using the telephone (page 246). See Station preset buttons (page 236). D CD aperture. See Compact disc player (page 240). E Navigation arrows. F DSP select. See Digital signal processing (DSP) (page 238). G CD eject. See Compact disc player (page 240). H Information. I Clock. J Seek up. CD track selection. End call. See Station tuning control (page 235). See Track selection (page 240). See Using the telephone (page 246). K Mute. 232 Audio unit overview L Traffic announcement. See Traffic information control (page 236). M Function 4. N Sound button. See Sound button (page 235). O Function 3. P OK. Q Function 2. R Menu select. S Function 1. T Phone menu. See Telephone (page 245). U Auxiliary select. See Auxiliary input (AUX IN) socket (page 113). See Auxiliary input (AUX IN) socket (page 243). V Seek down. CD track selection. Accept call. See Station tuning control (page 235). See Track selection (page 240). See Using the telephone (page 246). W Radio and waveband select. See Audio unit operation (page 235). X CD select. See Compact disc player (page 240). Y Volume control. Function buttons 1 to 4 are context dependent, and change according to the current unit mode. Descriptions for the functions are shown at the bottom of the screen display. 233 Audio system security SECURITY CODE Each unit incorporates a unique code that is linked to the vehicle identification number (VIN). The system will automatically check that the audio unit and vehicle match before allowing operation. If a security code message appears, please see your dealer. 234 Audio unit operation Note: The system will automatically change to another corresponding station if the current one becomes unavailable, for example when leaving the coverage area. ON/OFF CONTROL Press the on/off control. This will also operate the unit for up to one hour with the ignition turned off. Switching DAB service linking on and off. See General Information (page 75). The radio will switch off automatically after one hour. Seek tuning Select a waveband and briefly press one of the seek buttons. The unit will stop at the first station it finds in the direction you have chosen. SOUND BUTTON This will allow you to adjust the sound settings (for example bass and treble). Manual tuning 1. Press the sound button. 2. Use the up and down arrow buttons to select the required setting. 3. Use the left and right arrow buttons to make the necessary adjustment. The display indicates the level selected. 4. Press the OK button to confirm the new settings. Type 1 1. Press the MENU button. 2. Select RADIO mode and then MANUAL TUNE. 3. Use the left and right arrow buttons to tune down or up the waveband in small increments or press and hold to increment quickly, until you find a station you want to listen to. 4. Press OK to continue listening to a station. WAVEBAND BUTTON Press the RADIO button to select from the wavebands available. The selector can also be used to return to radio reception when you have been listening to another source. Type 2 and 3 1. Press function button 2. 2. Use the left and right arrow buttons to tune down or up the waveband in small increments or press and hold to increment quickly, until you find a station you want to listen to. 3. Press OK to continue listening to a station. Alternatively, press the left arrow button to display the available wavebands. Scroll to the required waveband and press OK. STATION TUNING CONTROL DAB service linking Scan tuning Note: The DAB service linking is as per default off. Scan allows you to listen to a few seconds of each station detected. Note: Service linking allows cross-referencing to other corresponding frequencies of the same station, for example FM and other DAB ensembles. Type 1 1. 235 Press the MENU button. Audio unit operation 2. Select RADIO mode and then SCAN. 3. Use the seek buttons to scan up or down the selected waveband. 4. Press OK to continue listening to a station. AUTOSTORE CONTROL Note: This will store up to a maximum of the 10 strongest signals available, either from the AM or the FM waveband, and overwrite the previously stored stations. It can also be used to store stations manually in the same way as other wavebands. Type 2 and 3 1. Press function button 3. 2. Use the seek buttons to scan up or down the selected waveband. 3. Press function button 3 again or OK to continue listening to a station. Note: On type 3 you must select either FM AST or AM AST to use this function. • • STATION PRESET BUTTONS This feature allows you to store your favourite stations so that they can be recalled by selecting the appropriate waveband and pressing one of the preset buttons. Press and hold function button 1 or the RADIO button. When the search is complete, sound is restored and the strongest signals are stored on the Autostore presets. TRAFFIC INFORMATION CONTROL Many stations that broadcast on the FM waveband have a TP code to signify that they carry traffic programme information. 1. Select a waveband. 2. Tune to the station required. 3. Press and hold one of the preset buttons. A progress bar and message will appear. When the progress bar completes the station has been stored. The audio unit will also mute momentarily as confirmation. Activating traffic announcements Before you can receive traffic announcements, you must press either the TA or TRAFFIC button. A ‘TA’ display will appear to show the feature is switched on. If you are already tuned to a station that broadcasts traffic information, ‘TP’ will also be displayed. Otherwise the unit will search for a traffic programme. This can be repeated on each waveband and for each preset button. Note: When you drive to another part of the country, FM and DAB stations that broadcast on alternative frequencies, and are stored on preset buttons, may be updated with the correct frequency and station name for that area. When traffic information is broadcast, it will automatically interrupt normal radio or CD playback and ‘Traffic announcement (TA)’ will appear in the display. If a non-traffic station is selected or recalled using a preset button, the audio unit will remain on that station unless TA or TRAFFIC is turned off, then on again. Note: If TA is on and you select a preset or manual tune to a non TA station no traffic announcement will be heard. 236 Audio unit operation Note: When you are listening to a non TA station and turn TA off and on again a TP seek will occur. Traffic announcement volume Traffic announcements interrupt normal broadcasts at a preset minimum level that is usually louder than normal listening volumes. To adjust the preset volume: • Use the volume control to make the necessary adjustment during an incoming TA broadcast. The display will show the level selected. Ending traffic announcements The audio unit will return to normal operation at the end of each traffic announcement. To end the announcement prematurely, press TA or TRAFFIC during the announcement. Note: If you press TA or TRAFFIC at any other time it will switch all announcements off. 237 Audio unit menus AUTOMATIC VOLUME CONTROL NEWS BROADCASTS Some audio units interrupt normal reception to broadcast news bulletins from stations on the FM waveband or radio data system (RDS) and enhanced other network (EON) linked stations, in the same way as traffic information is provided. When available, automatic volume control (AVC) adjusts the volume level to compensate for engine noise and road speed noise. 1. 2. 3. 4. 5. Press the MENU button and select AUDIO. Select AVC LEVEL or ADAPTIVE VOL. Use the left or right arrow button to adjust the setting. Press the OK button to confirm your selection. Press the MENU button to return. During news broadcasts, the display will indicate there is an incoming announcement. News interrupts are broadcast at the same preset volume level as traffic announcements. 1. Press the MENU button. 2. Select AUDIO or AUDIO SETTINGS. 3. Scroll to NEWS and turn on or off with the OK button. 4. Press the MENU button to return. DIGITAL SIGNAL PROCESSING (DSP) ALTERNATIVE FREQUENCIES DSP occupancy Many programmes that broadcast on the FM waveband have a programme identification (PI) code, which can be recognised by audio units. This feature takes into account the differences in distance from the various speakers in the vehicle to each seat. Select the sitting position for which the audio is to be correctly enhanced. If your radio has alternative frequencies (AF) tuning switched on and you move from one transmission area to another, this facility will search for and switch to a stronger station signal, if one can be found. DSP equaliser Select the music category that most suits your listening preference. The audio output will change to enhance the particular style of music chosen. Under certain conditions, however, AF tuning may temporarily disrupt normal reception. Changing the DSP settings When selected, the unit continually evaluates signal strength and, if a better signal becomes available, the unit will switch to that alternative. It mutes while it checks a list of alternative frequencies and, if necessary, it will search once across the selected waveband for a genuine alternative frequency. 1. 2. 3. 4. Press the MENU button. Select AUDIO or AUDIO SETTINGS. Scroll to the required DSP function. Use the up and down arrow buttons to select the required setting. 5. Press the OK button to confirm your selection. 6. Press the MENU button to return. 238 Audio unit menus It will restore radio reception when it finds one or, if one is not found, the unit will return to the original stored frequency. When selected, ‘AF’ will be shown in the display. 1. Press the MENU button. 2. Select AUDIO or AUDIO MENU. 3. Scroll to ALTERNAT FREQ. or ALTERNATIVE FREQ. and turn on or off with the OK button. 4. Press the MENU button to return. REGIONAL MODE (REG) Regional mode (REG) controls the behaviour of AF switching between regionally related networks of a parent broadcaster. A broadcaster may run a fairly large network across a large part of the country. At various times of the day this large network may be broken down into a number of smaller regional networks, typically centred on major towns or cities. When the network is not split into regional variants, the whole network caries the same programming. Regional mode ON: This prevents 'random' AF switches when neighbouring regional networks are not carrying the same programming. Regional mode OFF: This allows a larger coverage area if neighbouring regional networks are carrying the same programming, but can cause 'random' AF switches if they are not. 1. Press the MENU button. 2. Select AUDIO or AUDIO SETTINGS. 3. Scroll to RDS REGIONAL and turn on or off with the OK button. 4. Press the MENU button to return. 239 Compact disc player COMPACT DISC PLAYBACK SHUFFLE/RANDOM Note: During playback, the display indicates the disc, track and time that has elapsed since the start of the track. Random track playback, also known as shuffle, plays all tracks on the CD in random order. During radio reception, press the CD button once to start CD playback. Type 1 Playback will start immediately after a disc is loaded. 1. Press the MENU button and select CD MODE. 2. Select SHUFFLE, which then enables the function to be selected on or off. TRACK SELECTION • • • • When an MP3 CD is playing, options include SHUFFLE for the whole CD, or to play all the tracks in the folder in a random order. Press the seek up button once to move to the next track or press it repeatedly to access later tracks. Press the seek down button once to replay the current track. If pressed within two seconds of the start of a track, the previous track will be selected. Press the seek down button repeatedly to select previous tracks. Type 2 and 3 Press function button 2. Note: When an MP3 CD is playing, options include SHUFFLE for the whole CD, or to play all the tracks in the folder in a random order. Repeat presses of function button 2 will toggle these options. Press the up or down arrow buttons, and using the OK button, select the required track. Use the seek up or down button to select the next track to shuffle if required. Type 2 and 3 REPEAT COMPACT DISC TRACKS The desired track number may be entered using the numeric keypad. Dial the required track number until complete (for example 1 then 2 for track 12), or dial the number and directly press OK. Type 1 1. Press the MENU button and select CD MODE. 2. Select REPEAT, which then enables the function to be selected on or off. The track will replay once ended. FAST FORWARD/REVERSE Press and hold the seek down or up buttons to search backwards or forwards within the tracks on the disc. When an MP3 CD is playing, options include REPEAT for the track, or to repeat all the tracks in the folder. Type 2 and 3 Press function button 1. 240 Compact disc player When an MP3 CD is playing, options include REPEAT for the track, or to repeat all the tracks in the folder. Repeat presses of function button 1 will toggle these options. When a CD containing audio is inserted into the CD player the disc's directory structure is read in. It may take a while before playback starts and is dependant on the quality of the disc. MP3 tracks may be recorded on the CD in several ways. They can all be placed in the root directory like a conventional audio CD, or they can be placed in folders that may represent, for example, an album, an artist, or a genre. COMPACT DISC TRACK SCANNING The SCAN function allows you to preview each track for approximately 5 seconds. Playing a multi session disc Type 1 The normal playing sequence on CD's with multiple folders is to play the tracks in the first folder, then the tracks in any folders nested inside the first folder, then move onto the second folder, and so on. For example, if folder 1 has folders 1a and 1b within it, and folder 2 contains folder 2a, the playing sequence will be folder 1, 1a, 1b, 2, 2a. Various scan modes are possible, according to the type of CD currently playing. 1. Press the MENU button and select CD MODE. 2. Select SCAN, which then enables the function to be selected on or off. Note: When an MP3 CD is playing, options include SCAN for the CD, or just the tracks in the folder. When the playback of a file is finished the playback of the other files in the same directory continues. Directory change takes place automatically when all files in the current directory have been played back. 3. Press the OK button to stop the scan mode. Type 2 and 3 MP3 DISPLAY OPTIONS 1. Press function button 3. Note: When an MP3 CD is playing, options include SCAN for the CD, or just the tracks in the folder. Repeat presses of function button 3 will toggle these options. When an MP3 disc is playing, certain information encoded in each track can be displayed. Such information will normally include: • • • 2. Press function button 3 again to stop the scan mode. MP3 FILE PLAYBACK The file name The folder name ID3 information which might be the album or artist’s name. The unit will normally show the file name that is playing. To select one of the other items of information, press the INFO button repeatedly until the required item is shown in the display. Note: Some copy protected audio files may not be read by the CD player. The CD player also supports MP3 and WMA format audio files. 241 Compact disc player Note: If the ID3 information selected is unavailable, NO MP3 TAG will be shown in the display. CD text display options When an audio disc with CD text is playing, limited information encoded in each track can be displayed. Such information will normally include: • • • The disc name The artist name The track name. Note: These display options are selected in the same way as MP3 displays. NO DISC NAME or NO TRACK NAME will be shown in the display if no information has been encoded. ENDING COMPACT DISC PLAYBACK To restore radio reception on all units: • Press the RADIO button. Note: This will not eject the CD; the disc will merely pause at the point where radio reception was restored. To resume CD playback, press the CD button again. 242 Auxiliary input (AUX IN) socket Note: For optimum performance when using any auxiliary device set the volume on the device high. This will reduce audio interference when charging the device via the vehicle power supply socket. When fitted the Auxiliary input (AUX IN) socket permits an auxiliary device, such as an MP3 player, to be linked into the vehicle audio system. Output can be played through the vehicle speakers. To connect an auxiliary device, plug it into the AUX IN socket using a 3.5 mm conventional audio jack connector. Select the auxiliary input via the AUX button and playback will be heard through the vehicle speakers. LINE IN or LINE IN ACTIVE will appear in the vehicle audio unit display. Volume, treble and bass can be adjusted on the vehicle audio unit as normal. The vehicle audio unit buttons can also be used to restore playback from the vehicle audio unit, while the auxiliary device remains connected. 243 Audio troubleshooting Audio unit display Rectification PLEASE CHECK CD General error message for CD fault conditions, such as cannot read the CD, data-CD inserted, etc. Ensure disc is loaded correct way up. Clean and re-try, or replace disc with known music disc. If error persists contact your dealer. CD DRIVE MALFUNCTION General error message for CD fault conditions such as possible mechanism fault. CD DRIVE HIGH TEMP Ambient temperature too hot – unit will not work until it has cooled down. IPOD ERROR READING DEVICE General error message for iPod fault conditions, such as cannot read the data. Ensure iPod is inserted correctly. If error persists contact your dealer. 244 Telephone Note: If there is an ongoing call when the phone in use is selected as the new active phone, the call is transferred to the vehicle audio system. GENERAL INFORMATION CAUTION Using the system with the engine off will drain the battery. Note: Even if connected to the car system, your phone can still be used in the usual way. This section describes the functions and features of the Bluetooth mobile phone hands free system. Requirements for Bluetooth connection The Bluetooth mobile phone part of the system provides interaction with the audio or navigation system and your mobile phone. It allows you to use the audio or navigation system to make and receive calls without having to hold your mobile phone. The following are required before a Bluetooth phone connection can be made. 1. The Bluetooth feature must be activated on the phone and on the audio unit. Make sure the Bluetooth menu option in the audio unit is set to ON. For information on phone settings, refer to your phone user guide. 2. In the Bluetooth menu on your phone, search for Ford Audio and select it. 3. Enter the code number shown on the vehicle display using the phone keypad. If no code number is shown on the display, enter the Bluetooth PIN number 0000 using the phone keypad. Now enter the Bluetooth PIN number shown on the vehicle display. 4. If your mobile phone asks you to authorize the automatic connection, select YES. Compatibility of phones CAUTION As no common agreement exists, mobile phone manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the phone and hands-free system, which in some cases may significantly degrade the system performance. To avoid this situation, only recommended phones should be used. Please visit the website www.fordmobile-connectivity.com for full details. Note: A phone call will be disconnected if the audio unit is switched off. If the ignition key is turned to the off position the phone call will remain in progress. BLUETOOTH SETUP Before you can use your telephone with your vehicle it must be bonded to the vehicle telephone system. TELEPHONE SETUP Handling of phones Note: It may be necessary to confirm phonebook access to the Bluetooth system via the mobile phone. Phonebook Up to six Bluetooth devices can be bonded to the vehicle system. 245 Telephone Bond another Bluetooth phone After start up access to the phonebook list can be delayed for several minutes, depending upon the size. Bond a new Bluetooth phone as described in the requirements for a Bluetooth connection. Phonebook categories Phones stored in the system are accessible by using the phone list on the audio unit. The category is indicated as an icon: Phone Mobile Note: A maximum of six devices may be bonded. If six Bluetooth devices have already been bonded, one of these has to be debonded in order to bond a new device. Home TELEPHONE CONTROLS E87990 E87991 Remote control E87992 Office E87993 A Making a phone an active phone E Note: If there is an ongoing call when the phone in use is selected as the new active phone, the call is transferred to the vehicle audio system. D B When using the system for the first time, no phone is connected to the system. After switching on the ignition and the audio unit, the Bluetooth phone must be bonded to the system. See Bluetooth setup (page 245). C E129649 After bonding a Bluetooth phone to the system, this becomes the active phone. For further information refer to the phone menu. A Volume up B Voice button C End call Select the phone from the active phone menu. D Volume down E Receive call Turning the ignition and radio back on again, the last active phone is picked up by the system. USING THE TELEPHONE Note: In some cases the Bluetooth connection must also be confirmed on the phone. Note: Refer to your audio guide for details of the controls. See Audio unit overview (page 228). 246 Telephone Note: You can exit the phone menu by pressing any source button CD, RADIO or AUX. Dialling a number using the telephone keypad 1. Press the PHONE button. 2. Dial the number using the telephone keypad on the audio unit. 3. Press the OK button. Note: If you enter an incorrect digit whilst entering a phone number, press function button 3 to erase the last digit. A long press will erase the complete string of digits. Note: When referred to, the use of the up/down arrow buttons, seek up and seek down buttons, and the OK button can be used on either the steering wheel or the audio unit. This chapter describes the phone functions of the audio unit. An active phone must be present. Ending a call Even if connected to the audio unit, your phone can still be used in the usual way. Calls can be ended by: • pressing the seek up button • pressing the OK button • pressing function button 4. Making a call Dialling a number using voice control Phone numbers can be dialled using voice control. See Telephone commands (page 257). Redialling a number 1. Press the PHONE button. 2. Press the up/down arrow buttons until CALL LISTS is displayed. 3. Press the OK button. Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled. Dialling a number using the address book 1. Press the PHONE button. 2. Press the up/down arrow buttons until PHONEBOOK is shown. 3. Press the OK button. Note: You can also use the telephone keypad to select the first letter of the entry you are looking for. Press the relevant number that corresponds to the letter repeatedly until the required letter is displayed. 4. Press the up/down buttons to select the desired call list. 5. Press the OK button. 6. Press the up/down buttons to select the desired phone number. 7. Press the OK button. 4. Press the up/down arrow buttons to select the desired phone number. Note: Press and hold the up/down arrow buttons to search forwards or backwards within the phonebook. Redialling the last dialled number 1. Press the PHONE button. 2. Press the up/down arrow buttons until REDIAL is displayed. 3. Press the OK button. 5. Press the OK button to dial the selected phone number. 247 Telephone Receiving an incoming call Muting the microphone Accepting an incoming call Note: During a call, it is possible to mute the microphone. Whilst muted, confirmation will appear in the display. Incoming calls can be accepted by pressing the seek down button, or by pressing the OK button. Press function button 1. Press the button once again to turn this function off. Rejecting an incoming call Changing the active phone Incoming calls can be rejected by: • pressing the seek up button, or • pressing the arrow down button to highlight REJECT and then pressing the OK button. Note: Phones must be bonded to the system before they can be made active. Note: After bonding a phone to the system, this becomes the active phone. 1. Press the PHONE button. 2. Press the up/down buttons until SELECT PHONE is shown. 3. Press the OK button. 4. Scroll through the different stored phones by using the up/down buttons to display the bonded phones. 5. Press the OK button to select the phone which is to be the active phone. Receiving a second incoming call Note: The second incoming call function must be activated in your phone. If there is an incoming call whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call. Accepting a second incoming call Debonding a bonded phone Note: The first incoming call will be disconnected and replaced by the second incoming call. A bonded phone can be deleted from the system at any time, unless a phone call is in progress. Second incoming calls can be accepted by pressing the seek down button on the steering wheel or on the audio unit, or by pressing the OK button on the audio unit. 1. Press the PHONE button. 2. Press the up/down buttons until SELECT PHONE is shown. 3. Press the OK button. 4. Press the up/down buttons to highlight the required phone. 5. Press function button 1. Rejecting a second incoming call Second incoming calls can be rejected by: • pressing the seek up button, or • pressing the arrow down button to highlight REJECT and then pressing the OK button. Second incoming calls can be rejected by pressing function button 4. 248 Voice control If you are not sure how to continue say "HELP" for assistance or "CANCEL" if you do not wish to continue. PRINCIPLE OF OPERATION CAUTION The "HELP" function provides only a subset of the available voice commands. Detailed explanations of all possible voice commands can be found on the following pages. Using the system with the engine off will drain the battery. Voice recognition enables operation of the system without the need to divert your attention from the road ahead in order to change settings, or receive feedback from the system. Voice commands All voice commands should be given using a natural speaking voice, as if speaking to a passenger or on the phone. Your voice level should be dependant on the surrounding noise level inside or outside the vehicle but do not shout. Whenever you issue one of the defined commands with the system active, the voice recognition system converts your command into a control signal for the system. Your inputs take the form of dialogues or commands. You are guided through these dialogues by announcements or questions. USING VOICE CONTROL System operation Please familiarise yourself with the functions of the system before using voice recognition. The order and content of the voice controls are given in the following lists. The tables show the sequence of user voice commands and system responses for each available function. Supported commands The voice control system allows you to control the following vehicle functions: • Bluetooth phone <> indicates a number or stored name tag to be inserted by the user. • radio Short cuts • CD Player • external device (USB) • external device (iPod) • automatic climate control There are a number of voice command short cuts available, which allow you to control some vehicle features without having to follow the complete command menu. These are: • System response • As you work through a voice session the system will prompt you with a beep tone each time the system is ready to proceed. Do not try to give any commands until the beep tone has been heard. The voice control system will repeat each spoken command back to you. • • • 249 phone: "MOBILE NAME", "DIAL NUMBER", "DIAL NAME", and "REDIAL" automatic climate control: "TEMPERATURE", "AUTO MODE", "DEFROSTING/DEMISTING ON" and "DEFROSTING/DEMISTING OFF" radio: "TUNE NAME" external device (USB): "TRACK" external device (iPod): "TRACK" Voice control Start communicating with the system • Store up to 20 name tags per function. Before you can start talking to the system you first have to press the VOICE button for each operation and wait until the system answers with a beep. See Voice Control (page 42). • The average recording time for each name tag is approximately 2-3 seconds. AUDIO UNIT COMMANDS Press the button again to cancel the voice session. CD Player You can control playback directly by voice control. Name tag The name tag functionality can support the phone, audio and navigation features by using the "STORE NAME" function. You can assign name tags to items such as favourite radio stations and personal phone contacts. See Audio unit commands (page 250). See Telephone commands (page 257). Overview The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. "CD PLAYER" "HELP" "PLAY" "TRACK" * "SHUFFLE ALL" "SHUFFLE FOLDER" ** "SHUFFLE OFF" "REPEAT FOLDER" ** "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Only available if the CD contains audio data files like MP3. Track You can choose a track on your CD directly. 250 Voice control Steps User says System answer 1 "CD PLAYER" "CD PLAYER" 2 "TRACK" 3 "" "TRACK NUMBER PLEASE" * "TRACK " ** * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245) Shuffle all To set random playback. Steps User says System answer 1 "CD PLAYER" "CD PLAYER" 2 "SHUFFLE ALL" Overview Radio The overview below shows the available voice commands. The following lists will give further information about the complete command menu. The radio voice commands support the functionality of the radio and allow you to tune radio stations by voice control. "RADIO" "HELP" "AM" "FM" "TUNE NAME" * "DELETE NAME" "DELETE DIRECTORY" "PLAY DIRECTORY" "STORE NAME" 251 Voice control "RADIO" "PLAY" * Can be used as a shortcut. Tune frequency This function allows you to tune your radio by voice commands. Steps User says System answer 1 "RADIO" "RADIO" 2 "AM" "AM FREQUENCY PLEASE" "FM" "FM FREQUENCY PLEASE" 3 "" "TUNE " * * The frequency may be entered in a variety of ways. Refer below for representative examples. • • • • • FM band: 87.5 - 108.0 in increments of 0.1 • • • • • "Eighty nine point nine" (89.9) "Ninety" (90.0) "One hundred point five" (100.5) "One zero one point one" (101.1) "One zero eight" (108.0) "Five thirty one" (531) "Nine hundred" (900) "Fourteen forty" (1440) "Fifteen zero three" (1503) "Ten eighty" (1080) Store name AM/MW band: 531 - 1602 in increments of 9 If you have tuned a radio station, you can store it with a name in the directory. AM/LW band: 153 - 281 in increments of 1 Steps User says System answer 1 "RADIO" "RADIO" 2 "STORE NAME" "STORE NAME" "NAME PLEASE" 3 "" "REPEAT NAME PLEASE" 4 "" "STORING NAME" " STORED" 252 Voice control Tune name This function allows you to call up a stored radio station. Steps User says 1 "RADIO" 2 "TUNE NAME" 3 "" System answer "RADIO" "NAME PLEASE" * "TUNE " * Can be used as a shortcut. Delete name This function allows you to delete a stored radio station. Steps User says System answer 1 "RADIO" "RADIO" 2 "DELETE NAME" "NAME PLEASE" 3 "" "DELETE " "CONFIRM YES OR NO" 4 "YES" "DELETED" "NO" "COMMAND CANCELLED" Play directory This function allows you to let the system tell you all of the stored radio stations. Steps User says System answer 1 "RADIO" "RADIO" 2 "PLAY DIRECTORY" "PLAY " Delete directory This function allows you to delete all stored radio stations at once. 253 Voice control Steps User says System answer 1 "RADIO" "RADIO" 2 "DELETE DIRECTORY" "DELETE DIRECTORY" "CONFIRM YES OR NO" 3 "YES" "RADIO DIRECTORY DELETED" "NO" "COMMAND CANCELLED" Play This function switches the audio source to the radio mode. Steps User says System answer 1 "RADIO" "RADIO" 2 "PLAY" Auxiliary input This function allows you to switch the audio source to the attached auxiliary input device. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "LINE IN" "LINE IN" Overview External devices - USB The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. These voice commands support the functionality of an external USB device which may be connected to the audio unit. "EXTERNAL DEVICE", "USB" "HELP" 254 Voice control "EXTERNAL DEVICE", "USB" "PLAY" "TRACK" * "PLAYLIST" "FOLDER" ** ** "SHUFFLE ALL" "SHUFFLE FOLDER" "SHUFFLE PLAYLIST" "SHUFFLE OFF" "REPEAT TRACK" "REPEAT FOLDER" "REPEAT OFF" * Can be used as a shortcut. ** Playlists and folders activated by voice control must be assigned special filenames. See General Information (page 265). USB play This function allows you to switch the audio source to the attached USB device. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "USB" "USB" 3 "PLAY" USB Track You can choose a track on your USB device directly. 255 Voice control Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "USB" "USB" 3 "TRACK" 4 "TRACK NUMBER PLEASE" "" * "TRACK " * Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5" for track 245) Overview External devices - iPod The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. These voice commands support the functionality of an iPod which may be connected to the audio unit. "EXTERNAL DEVICE", "IPOD" "HELP" "PLAY" "TRACK" * "PLAYLIST" ** "SHUFFLE ALL" "SHUFFLE PLAYLIST" "SHUFFLE OFF" "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Playlists activated by voice control must be assigned special filenames. See General Information (page 265). 256 Voice control iPod Track You can choose a track off the all titles list of your iPod directly. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "IPOD" "IPOD" 3 "TRACK NUMBER PLEASE" "TRACK" 4 "" * "TRACK " ** * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to five single digits (for example "5", "2", "4", "5", "3" for track 52453), to a limit of 65535. iPod playlist You can choose a playlist from your iPod directly. Steps User says System answer 1 "EXTERNAL DEVICE" "EXTERNAL DEVICE" 2 "IPOD" "IPOD" 3 "PLAYLIST" "PLAYLIST NUMBER PLEASE" 4 "" * "PLAYLIST " * Playlists activated by voice control must be assigned special filenames. See General Information (page 265). Overview TELEPHONE COMMANDS The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. Phone Your phone system allows you to create an additional phonebook. The stored entries can be dialled by voice control. Phone numbers stored by using voice control are stored on the vehicle system and not in your phone. 257 Voice control "PHONE" "HELP" "MOBILE NAME" "DIAL NUMBER" "DIAL NAME" * * * "DELETE NAME" "DELETE DIRECTORY" "PLAY DIRECTORY" "STORE NAME" "REDIAL" * "ACCEPT CALLS" "REJECT CALLS" * Can be used as a shortcut. Phone functions Dial number Phone numbers can be dialled after giving the name tag voice command. Steps User says System answer 1 "PHONE" "PHONE" 2 "DIAL NUMBER" 3 "" " CONTINUE?" 4 "DIAL" "DIALLING" "CORRECTION" " CONTINUE?" "NUMBER PLEASE" * * Can be used as a shortcut. 258 Voice control Dial name Phone numbers can be dialled after giving the name tag voice command. Steps User says 1 "PHONE" System answer "PHONE" 2 "DIAL NAME" "NAME PLEASE" 3 "" "DIAL " "CONFIRM YES OR NO" 4 "YES" "DIALLING" "NO" "COMMAND CANCELLED" * * Can be used as a shortcut. Redial This function allows you to redial the last dialled phone number. Steps User says System answer "PHONE" 1 "PHONE" 2 "REDIAL" * 3 "YES" "DIALLING" "NO" "COMMAND CANCELLED" "REDIAL" "CONFIRM YES OR NO" * Can be used as a shortcut. Mobile name This function allows you to access phone numbers stored with a name tag in your mobile phone. Steps User says System answer 1 "PHONE" "PHONE" 2 "MOBILE NAME" "MOBILE NAME" "" * * Can be used as a shortcut. 259 Voice control DTMF (Tone dialling) Note: DTMF can only be used during an ongoing call. Operate the VOICE button and wait for the system prompt. This function transfers spoken numbers into DTMF tones. For example, to make a remote enquiry to your home answering machine or to enter a PIN number etc. Steps Can only be used with vehicles installed with a dedicated VOICE button. User says System answer 1 2 "NUMBER PLEASE" "" Create a phonebook Store name New entries can be stored with the "STORE NAME" command. This feature can be used to dial a number by calling up the name instead of the full phone number. Steps User says System answer 1 "PHONE" "PHONE" 2 "STORE NAME" "STORE NAME" "NAME PLEASE" 3 "" "REPEAT NAME PLEASE" 4 "" "STORING NAME" " STORED" "NUMBER PLEASE" 5 "" "" 6 "STORE" "STORING NUMBER" "" "NUMBER STORED" Delete name Stored names can also be deleted from the directory. 260 Voice control Steps User says System answer 1 "PHONE" "PHONE" 2 "DELETE NAME" "NAME PLEASE" 3 "" "DELETE " "CONFIRM YES OR NO" 4 "YES" " DELETED" "NO" "COMMAND CANCELLED" Play directory Use this function to let the system tell you all stored entries. Steps User says System answer 1 "PHONE" "PHONE" 2 "PLAY DIRECTORY" "PLAY DIRECTORY" Delete directory This function allows you to delete all entries in one go. Steps User says System answer 1 "PHONE" "PHONE" 2 "DELETE DIRECTORY" "DELETE DIRECTORY" "CONFIRM YES OR NO" 3 "YES" "DIRECTORY DELETED" "NO" "COMMAND CANCELLED" Main settings Reject calls Calls can be set to be automatically rejected using voice control. 261 Voice control Steps User says System answer 1 "PHONE" "PHONE" 2 "REJECT CALLS" "REJECT CALLS" "ACCEPT CALLS" "ACCEPT CALLS" * * use this command to turn the reject mode off Overview CLIMATE CONTROL COMMANDS The overview below shows the available voice commands. The following lists will give further information about the complete command menu in selected examples. Climate The climate voice commands supports the functionality of the fan speed, temperature and mode settings. Not all functions are available on all vehicles. "CLIMATE" "HELP" * "FAN" "DEFROSTING/DEMISTING ON" * * "DEFROSTING/DEMISTING OFF" "TEMPERATURE" "AUTO MODE" * * * Can be used as a shortcut. On vehicles fitted with an English language module the "FAN" shortcut is not available. Fan This function allows you to adjust the fan speed. 262 Voice control Steps User says System answer 1 "CLIMATE" "CLIMATE" 2 "‘FAN" "FAN SPEED PLEASE" "MINIMUM" "FAN MINIMUM" "" "FAN " "MAXIMUM" "FAN MAXIMUM" 3 * * Can be used as a shortcut. On vehicles fitted with an English language module the "FAN" shortcut is not available. Defrosting/Demisting Steps User says System answer 1 "CLIMATE" "CLIMATE" "DEFROSTING ON/DEMISTING * 2 ON" "DEFROSTING OFF/DEMISTING * OFF" "DEFROSTING ON/DEMISTING ON" "DEFROSTING OFF/DEMISTING OFF" * Can be used as a shortcut. Temperature This function allows you to adjust the temperature. Steps User says 1 "CLIMATE" 2 3 "TEMPERATURE" System answer "CLIMATE" * "TEMPERATURE PLEASE" "MINIMUM" "TEMPERATURE MINIMUM" "" or "" "TEMPERATURE " 263 Voice control Steps User says System answer "MAXIMUM" "TEMPERATURE MAXIMUM" * Can be used as a shortcut. Auto mode Steps User says System answer 1 "CLIMATE" "CLIMATE" 2 "AUTO MODE" * "AUTO MODE" * Can be used as a shortcut. Can be deactivated by selecting a different temperature or fan speed. 264 Connectivity The system supports a range of external devices, to fully integrate with your audio unit via the USB and auxiliary input sockets. Once connected, control of the external device is possible via the audio unit. GENERAL INFORMATION CAUTIONS Take care when handling external devices with exposed electrical connectors (such as the USB plug). Always replace the protective cap/shield when possible. There may be a risk of electrostatic discharge causing damage to the device. A list of typical compatible devices are shown below: • USB memory sticks • USB portable hard drives • Some MP3 players with USB connection • iPod media players (refer to www.ford-mobile -connectivity.com for latest compatibility list). Do not touch or handle the USB socket in the vehicle. Cover the socket when not in use. Only use USB Mass-Storage device compliant devices. Always switch your audio unit to a different source (for example the radio) before unplugging the USB device. The system is USB 2.0 full speed compatible, USB 1.1 host compliant and supports FAT 16/32 file systems. Do not install or connect USB hubs or splitters. Information on audio file structures for external devices USB Note: The system is only designed to recognize and read suitable audio files from a USB device that conforms to the USB Mass-Storage device class or an iPod. Not all available USB devices can be guaranteed to function with the system. Create only a single partition on the USB device. If playlists are created, they must contain correct file paths referenced to the USB device. It is recommended to create the playlist after the audio files have been transferred to the USB device. Note: It is possible to connect compatible devices with a trailing USB lead as well as those that plug into the vehicle USB socket directly (for example USB memory sticks and pen drives). Playlists must be created in .m3u format. Audio files must be in .mp3 format. Note: Some USB devices with a higher power consumption may not be compatible (for example some larger hard drives). Do not exceed the following limits: • 1000 items per folder (files, folders and playlists) • 5000 folders per USB device (including playlists) • 8 subfolder levels. Note: Access time to read the files on the external device will vary depending upon factors such as the file structure, size and device content. 265 Connectivity Connection To enable voice control for custom playlists and folders, follow the procedure below: • Create folders named with the structure "Ford<*>" where <*> is a number 1-10. For example "Ford3" without an extension. • Create playlists named with the structure "Ford<*>.m3u" where <*> is a number 1-10. For example "Ford5.m3u" without any space between "Ford" and the number. Plug in the device, and if necessary secure it to prevent movement within the vehicle. Connecting an iPod For optimum convenience and audio quality, we recommend that you purchase a dedicated single connection lead available from your dealer. Alternatively, it is possible to connect your iPod using the standard iPod USB cable and a separate 3.5mm audio jack lead. If using this method preset the iPod volume to maximum and turn off any equalizer settings before making the connections: Thereafter, custom folders and playlists will be selectable with voice control. See Audio unit commands (page 250). iPod • To enable voice control for custom playlists, create playlists named with the structure "Ford<*>" where <*> is a number 1-10. For example "Ford7" without any space between "Ford" and the number. • Connect the headphone output of the iPod to the AUX IN socket. Connect the USB cable from the iPod to the vehicle USB socket. CONNECTING AN EXTERNAL DEVICE - VEHICLES WITH: BLUETOOTH Thereafter, playlists will be selectable with voice control. See Audio unit commands (page 250). Connecting a Bluetooth audio device CONNECTING AN EXTERNAL DEVICE CAUTION As various standards exist, manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the Bluetooth device and the system, which in some cases may limit system functionality. To avoid this situation, only recommended devices should be used. WARNING Make sure the external device is securely mounted within the vehicle, and that trailing connections do not obstruct any of the driving controls. External devices may be connected using the auxiliary input socket and the USB port. See Auxiliary input (AUX IN) socket (page 113). See USB port (page 113). Please visit the website www.ford-mobile-connectivity.com for full details. 266 Connectivity Bonding the device Folder To connect the device to the system follow the same procedure as for Bluetooth hands free phones. See Bluetooth setup (page 245). E100022 Playlist E100023 Operating the device Album Note: The seek buttons and file information will only work on certain phones and devices. E100024 Artist Select Bluetooth audio as the active source. E100025 Filename 1. Select AUX. 2. Press the up and down arrow buttons to select the desired function. 3. Press the OK button. E100026 Track title E100027 Tracks can be accessed by skipping forwards and backwards using the steering wheel controls, or directly from the audio unit controls. Information not available E100028 Operation Audio control Select the USB device as the audio source by repeatedly pressing the AUX button until the USB screen appears in the display. After first connecting the USB device, the first track within the first folder will start to play automatically. Subsequently, following audio source switching, the position of playback on the USB device is remembered. Press the seek up and down keys to skip backwards and forwards through tracks. Press and hold the seek keys to enable fast rewind/fast forward through track content. Press the INFO button or function button 4 to display the following: • Title. • Artist. • Album. • File name. To browse the device contents, press the up/down arrow key or the OK button once. USING A USB DEVICE Various icons are used to identify types of audio file, folders etc. USB device is the active source E100029 267 Connectivity The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the folder view. • ">" after an entry indicates a further level down is readable (for example a folder named after an album, with individual album tracks within that folder). • "<" before the list indicates that a further level up is readable. • Icons to the left of track/folder text indicate the type of file/folder. Refer to the list for an explanation of these icons. • • folder name file name. USING AN IPOD Various icons are used to identify types of audio file, folders etc. iPod is the active source E100030 iPod playlist E100031 iPod artist E100032 iPod album To navigate the USB device contents, use the up/down arrow keys to scroll through lists, and the left/right keys to move up or down within the folder hierarchy. Once your desired track, playlist or folder is highlighted, press the OK button to select playback. E100033 iPod genre E100034 iPod song Note: If you wish to jump to the top level of the USB device contents, press and hold the left arrow key. E100035 iPod generic category E100036 Audio control iPod generic media file Press the seek up and down keys to skip backwards and forwards through tracks. E100037 Press and hold the seek keys to enable fast rewind/fast forward through track content. Operation Connect the iPod. See Connecting an external device (page 266). Use the function buttons to enable shuffle, repeat and scan with respect to the whole device, folders and playlists. Select the iPod as the audio source by repeatedly pressing the AUX button until the iPod screen appears in the display. Press the INFO button or function button 4 to display the following: • title • artist • album 268 Connectivity The iPod menu list for browsing contents will be available through the radio display. Navigation of the contents follows the same principles as for iPod standalone use (for example search by artist, title, etc.). To browse the iPod contents, press the up/down arrow key or the OK button once. Press the INFO button or function button 4 to display the following: • title • artist • album. The display will show the track information, together with other important information described below: • A vertical scroll bar on the right side of the display shows the current position of the list view. • ">" after an entry indicates a further level down is readable (for example all albums by a particular artist). • "<" before the list indicates that a further level up is readable. • An icon on the left side indicates the type of the currently displayed list (for example list of albums). Refer to the list for an explanation of these icons. To navigate the iPod contents, use the up/down arrow keys to scroll through lists, and the left/right keys to move up or down within the hierarchy. Once your desired track, playlist, album, artist or genre is highlighted, press the OK button to select playback. Note: If you wish to jump to the top level of the iPod contents, press and hold the left arrow key. Audio control Press the seek up and down keys to skip backwards and forwards through tracks. Press and hold the seek keys to enable fast rewind/fast forward through track content. Use the function buttons to enable shuffle and repeat with respect to playlists. Press function button 3 to scan the whole device or a playlist if it is in operation. 269 Navigation introduction GENERAL INFORMATION CAUTIONS Use only 12 cm (4.7 inches) discs or 8 cm (3.1 inches) discs with a suitable adaptor. Press the relevant button on the unit bezel to access the system functions. This will take you into the selected mode. Do not attempt to open the unit. If the unit malfunctions consult your dealer. One hour mode Improper use of settings and connections, other than those explained in this handbook, can damage the unit. To conserve battery power, the system can be operated in one hour mode. If the ignition is off, press the ON/OFF button to switch the system on. The system will automatically switch off after one hour. Do not turn the ignition key or attempt to start the engine while the software is updating. System notes WARNINGS The front glass on the liquid crystal display may break if hit with a hard object. If the glass breaks, do not touch the liquid crystalline material. In case of contact with the skin, wash immediately with soap and water. The system is recommended for use when the ignition key is turned to the accessory position or when the engine is running. If the system is used extensively when the engine is not running, care needs to be taken to avoid draining the battery. The unit is a highgrade laser product which uses an invisible laser beam. If this is handled incorrectly it can emit dangerous rays. Do not attempt to look through any openings in the unit. ROAD SAFETY WARNINGS The system provides you with information designed to help you reach your destination quickly and safely. CAUTIONS Irregular shaped CDs and CDs with a scratch protection film or self adhesive labels attached should not be used. Warranty claims, where this type of disc is found to be inside an audio unit returned for repair, will not be accepted. For reasons of safety, the driver should only program the system when the vehicle is stationary. The system provides no assistance with respect to stop signs, traffic lights, areas under construction or other important safety information. Do not clean the unit with solvents or aerosol cleaning agents. Use only a damp cloth. Do not use the system until you have familiarised yourself with its operation. Do not insert foreign objects into any of the unit disc drives or media card slots. Only view the system display when driving conditions permit. Do not insert more than one disc into the unit disc drive. 270 Navigation introduction Safety information Read and follow all stated safety precautions. Failure to do so may increase your risk of collision and personal injury. Ford Motor Company shall not be liable for any damages of any type arising from failure to follow these guidelines. If detailed viewing of route instructions is necessary, pull off the road when it is safe to do so and park your vehicle. Do not use the navigation system to locate emergency services. To use the system as effectively and safely as possible, always use the latest navigation information. Your dealer will be able to assist with this. 271 Navigation unit overview A Descriptions for function buttons 1-4 Function buttons 1 to 4 are context dependent, and change according to the current unit mode. Descriptions for the functions are shown at the bottom of the screen display. 1 E104157 2 3 4 A 272 Navigation unit overview Vehicles with CD-SD navigation system A B C E D F G V U H T S I R J Q K P N O M L E129241 A CD eject. B Navigation arrows. C CD aperture. D OK. E Information. F Map select. See Route displays (page 284). G Menu select. See System settings (page 280). H Telephone keypad and station presets. See Audio unit operation (page 235). See Audio unit menus (page 238). See Telephone (page 245). I Clock. See System settings (page 280). J Traffic announcement. See Traffic Message Channel (page 285). K Function 4. 273 Navigation unit overview L Function 3. M Seek up. CD track selection. See Station tuning control (page 235). See Track selection (page 240). N On/off and volume control. See On/off control (page 235). O Seek down. CD track selection. See Station tuning control (page 235). See Track selection (page 240). P Function 2. Q Function 1. R Phone select. See Telephone (page 245). S Auxiliary select. See Auxiliary input (AUX IN) socket (page 243). T Radio select. See Audio unit operation (page 235). See Audio unit menus (page 238). U CD select. See Compact disc player (page 240). V Navigation select. See System settings (page 280). 274 Navigation unit overview Vehicles with Sony CD-SD navigation system A B C D E F G Y X H W I V J U K T L S R Q P O N M E129242 A On/off control. See On/off control (page 235). B Navigation select. See System settings (page 280). C Telephone keypad and station presets. See Audio unit operation (page 235). See Audio unit menus (page 238). See Telephone (page 245). D CD aperture. E Navigation arrows. F Map select. See Route displays (page 284). G CD eject. H Information. I Clock. See System settings (page 280). J Seek up. CD track selection. end call. See Station tuning control (page 235). See Track selection (page 240). See Using the telephone (page 246). 275 Navigation unit overview K Home select. See System settings (page 280). L Traffic announcement. See Traffic Message Channel (page 285). M Function 4. N Sound select. See Sound button (page 235). O Function 3. P OK. Q Function 2. R Menu select. See System settings (page 280). S Function 1. T Phone select. See Telephone (page 245). U Auxiliary select. See Auxiliary input (AUX IN) socket (page 243). V Seek down. CD track selection. accept call. See Station tuning control (page 235). See Track selection (page 240). See Using the telephone (page 246). W Radio select. See Audio unit operation (page 235). See Audio unit menus (page 238). X CD select. See Compact disc player (page 240). Y Volume control. 3. Use the up and down arrow buttons to select the required feature. 4. Press the OK button to confirm your selection. LOADING THE NAVIGATION DATA For map updates and system upgrades please refer to your dealer. Loading the navigation data E129900 1. Load the navigation SD card into the aperture. 2. Press the NAV button. The road safety warning will be shown in the display. 276 Navigation Quick start Vehicles with mobile navigation system Installing the micro SD card CAUTION Using the system with the engine off will drain the battery. 1 Note: You will be charged when sending and receiving text messages. Note: Refer to your phone handbook for all phone functions and operation. 2 Note: Keep the activation code (printed on the installation guide) in a safe place. Note: Retain the activation text message in your mobile phone inbox. E114212 1. Remove the micro SD card from the adaptor. 2. Insert the micro SD card into the mobile phone. Compatibility of phones CAUTION As no common agreement exists, mobile phone manufacturers are able to implement a variety of profiles in their Bluetooth devices. Because of this, an incompatibility can occur between the phone and hands-free system, which in some cases may significantly degrade the system performance. To avoid this situation, only recommended phones should be used. Activating the mobile phone navigation system Note: The radio must be switched on before connecting the mobile phone to the in-car GPS receiver. Note: The Ford Mobile Navigation must be installed and activated on your mobile phone. Note: It is possible to activate up to a maximum of three phones. Please visit the website www.ford-mobile-connectivity.com for full details. Note: Detailed instructions are available on the micro SD card and at www.ford-mobile-connectivity.com. To connect the device to the system follow the same procedure as for Bluetooth hands free phones. See Bluetooth setup (page 245). 1. 277 Switch the radio on. Navigation Quick start 3. Press the OK button to activate your selection. Selection lists Various screens are presented which offer a selection list of available options. 1. Select the option you require, or if it is not shown on the screen use the up and down arrow buttons to view the remainder of the selection list. 2. Press the OK button to confirm your selection. E114213 2. Switch your mobile phone on and start the "Ford Mobile Navigation". 3. Choose "Select Destination". 4. Choose "Enter Address". 5. Change route options if necessary and start the route guidance. 6. The vehicle display will show the turn information. Voice instructions are heard via the vehicle speakers. Note: Your mobile phone will display your current position. 7. Alphanumeric keypad entry When it is necessary to enter an address, a keypad will appear prompting you to enter a postcode, city, or street. 1. Use the up, down, left and right arrow buttons to select the letter or number that you require. Note: As you spell the entry the results will appear in the display. You are able to exit the application and continue your route guidance after restarting the application. Note: The system will limit your entries to only those characters which spell a valid entry. Vehicles with CD-SD navigation system or Sony CD-SD navigation system 2. Press the OK button to activate your selection. The system has a large range of features, yet is easy and intuitive to use. Route guidance is shown on the display screen. The screen provides full information for operating the system through the use of menus, text screens and map displays. Screen selections are made by scrolling through the menus using the up, down, left and right arrow buttons and pressing the OK button to activate the desired setting. Route setting example Navigation main screen • To select the navigation system, press the NAV button. The road safety caution will be displayed. To use the system, read the caution and press the OK button. Destination input screen • Use the up and down arrow buttons and scroll to Destination input. • Press the OK button to activate your selection. Basic operation 1. Press either the NAV or MENU button to enter the menu structure. 2. Use the up, down, left and right arrow buttons and scroll through the various selection lists. Note: A list with several options is shown. 278 Navigation Quick start • • • Starting from the top, select the country followed by either the postcode if available or city and street name. Use the alphanumeric keypad and selection lists to select your address details. Once sufficient information has been entered, scroll to Start guidance and press the OK button to activate your selection. Note: If you only need to navigate to a city centre for example, full address details are not required. • • The route is now calculated and the screen returns to the main navigation screen with instructions on how to proceed. Follow the screen information and voice prompts to reach your destination. 279 System settings Most of the important settings for your navigation unit can be accessed via the MENU or NAV button. The following section describes the various options and how to use them. Last destinations This feature allows quick access to a history of previous destinations entered in the system. A detailed display will show the complete stored information including an overview map. Select the required repeat destination from the list. For menu structures: See Information Displays (page 75). Menu structure - Information and entertainment display - Vehicles with navigation system Favourites This feature allows you to customize a personal destination address book and assign user defined names to addresses and locations. A detailed display will show the complete stored information including an overview map. Select the required repeat destination from the list. Route This feature allows you to customise the route to your specific journey requirements (for example continue route guidance, block specific sections of your route or select specific sections of a route). Points of interest This feature allows you to customise the route to your specific journey requirements (for example select a museum on route or a specific point of interest near your destination). Destination input This feature allows you to enter your destination details (for example enter city names, enter street names or pick a place from a map). Tour planning Traffic This feature allows you to enter a number of different destinations and select the order in which you wish to visit them. You can also modify an existing tour or recall a previous tour. The system will automatically calculate and display your chosen journey. This feature allows you to customise how you receive traffic information (for example review and sort traffic messages, review your route or block parts of your route). Home address Store position This feature allows you to start the route guidance to your home address or change the details of your home address. This feature allows you to store and name your current position. Note: On Vehicles with a Sony CD-SD navigation system, press the HOME button and the system will automatically start route guidance to the listed home address. Route options This feature allows you to customise the route to your specific journey requirements (for example select the fastest or most economical route or select a route that will avoid tunnels, seasonal roads and toll roads). 280 System settings Special functions Nav audio mixing This feature allows you to select GPS and system information or a demonstration of the system functionality. This feature allows you to adjust the volume mix between the navigation voice output and audio source. Map display DSP settings This feature allows you to change the way the map screen is displayed (for example clean 2D and clean 3D view) and to customise display information for your journey (for example time to arrival and lane guidance). This feature allows you to customise speaker output relevant to seat positions. DSP equaliser This feature allows you to select the music category that most suits your listening preference. The audio output will change to enhance the particular style of music chosen. Assistance options This feature allows you to customise display information for your journey (for example signs, lanes and speed limits). News This feature allows you to receive news bulletins from stations on the FM waveband or radio data system (RDS) and enhanced other network (EON) linked stations, in the same way as traffic information is provided. You can turn this on and off. Personal data This feature allows you to edit and delete personal data (for example your home address). Reset all settings This feature allows you to reset the navigation settings. Alternative frequencies This feature will search for and switch to the strongest station signal when moving from one transmission area to another. Menu structure - Information and entertainment display - All vehicles RDS regional Audio settings This feature controls the behaviour of AF switching between regionally related networks of a parent broadcaster. Adaptive volume This feature allows you to adjust the volume level to compensate for engine and road speed noise. You can turn this on and off. DAB service link This feature allows you to select stations that are broadcast on the DAB channels. Sound Bluetooth This feature allows you to adjust the sound settings (for example bass and treble. This feature allows you to switch Bluetooth on or off. 281 System settings Clock settings Set time This feature allows you to manually adjust the time. Set date This feature allows you to manually adjust the date, month and year. GPS time This feature allows you to, if in a suitable coverage area, automatically adjust the date and time using GPS. Set time zone This feature allows you select a specific time zone. Summertime This feature allows you set the system to adjust for seasonal time differences. Note: GPS time must be selected. 24-hour mode This feature allows you to adjust the system between 12 and 24-hour mode. 282 Navigation system ROUTE OPTIONS MENU Eco settings You can set a number of options which alter the way a route is planned. Trailer Use this feature to change the economy settings of your journey relating to whether or not you are towing a trailer and if so the size of trailer being towed. Using the up, down, left and right arrow buttons, you can select from the list which road features are to be avoided or included in the route by turning the feature on or off. Roof box Route Eco Use this feature to change the economy settings of your journey relating to the use of a roof box. This option will prioritise the most economical route to the destination. Dynamic Short When switched on, and if the unit is receiving a valid traffic message channel (TMC) signal, the route will be automatically updated to take into account real time traffic incidents or congestion. This option will prioritise the shortest route to the destination.. Note: This feature can be useful in avoiding delays or hold ups on journeys. Always ask Motorway Use this feature to make sure that you are always given the choice of route type selection for your journey. When switched on the system will look for motorways on your route and automatically update your route distance and timings. Fast This option will prioritise the fastest route to the destination. Driver Note: This feature can be useful in avoiding delays or hold ups on journeys. Leisurely This option will prioritise the route for a leisurely driver to the destination. Ferry/motorail When switched on the system will look for ferry crossings and motorail facilities on your route and automatically update your route distance and timings. Normal This option will prioritise the route for a normal driver to the destination. Toll Fast When switched on the system will look for toll roads on your route and automatically update your route distance and timings. This option will prioritise the route for a fast driver to the destination. 283 Navigation system Seasonal roads Junction zoom When switched on the system will look for seasonal roads on your route and automatically update your route distance and timings. This feature will automatically increase the zoom on the map display at times when you are required to make a turn, or perform more complex manoeuvres. Shortly after the zoom scale will return to the previous level. Note: This feature can be useful in avoiding delays or hold ups on journeys. Select AUTO to activate junction zoom. Toll sticker Navigation display When switched on the system will automatically select toll roads and update your route distance and timings. After commencing a navigation route, the default screen is the main navigation screen: ROUTE DISPLAYS Once an active route is underway, guidance will be given by on-screen information and voice prompts. Whichever audio source you wish to leave the unit in, basic turn by turn and distance information will remain on the screen in the form of a graphic inset. You do not need to leave the unit on the main navigation screen when you are navigating a route. Slightly more detailed information on your route may be available via the main navigation screen if required. Map display Press the MAP button for a map view. This view will show your current location with your vehicle in the centre shown as an arrow surrounded by a circle. The arrow will face in the direction of travel. The information on the top line gives the name of the current road, or the next road to take if a turn is approaching. WARNING Do not rely on the screen prompts when navigating. Always listen to the navigation voice and take care not be distracted from the road ahead. You can change the way the map is displayed by altering the zoom and orientation settings. Press the relevant function buttons to change the map scale and using the left and right arrow buttons zoom in or out. The current map scale is shown on the display. Map scale settings may be set between 50 metres to 500 kilometres or 0.05 miles to 500 miles, with an auto setting to the far left. The auto setting continuously changes the map scale according to the road type being driven. 284 Traffic Message Channel You may either select a view which shows messages only affecting your programmed route, or a view which shows all messages received. Press function button 1 to change the view. PRINCIPLE OF OPERATION Traffic message channel (TMC) stations are broadcast on the FM waveband. TMC is a feature that receives traffic alerts which can be used to plan alternative routes and avoid hold ups. USING TMC Press the TA or TRAFFIC button to show the traffic menu page. Traffic announcement Traffic announcement (TA) can be turned on or off via this menu. If switched on a TA indicator is shown in the information border of the status bar. Stations which broadcast on the FM waveband and carry traffic programme (TP) information are identified by TP shown in the screen display. With TA switched on the unit will respond to these announcements and interrupt music playback. After the announcement has ended music playback will resume. Ending traffic announcements The unit will return to normal operation at the end of each traffic announcement. To end the announcement prematurely, press the TA, TRAFFIC, RADIO or CD button during the announcement. Using TMC messages Select the required item to display a list of TMC messages. See General Information (page 75). This is only an overview display which gives very basic information. Select the message you require further information on and another screen will be displayed giving full message details on incident location etc. 285 Map updates The road network is constantly changing due to new roads, changes in road classification, etc. Therefore, it is not always possible to exactly match the map data in the system to the current road network. Map information is regularly updated, but all areas are not necessarily covered to the same level of detail. Some roads, in particular private roads, may not be included on the database. To help with accuracy, always use the latest version navigation disc. Your dealer will be able to provide this. 286 Appendices www.novero.com/declaration_of_conformity TYPE APPROVALS The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ford Motor Company is under license. Other trademarks and trade names are those of their respective owners. FCC/INDUSTRY CANADA NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TYPE APPROVALS iPod is a trademark of Apple Inc. FCC ID: WJLRX-42 TYPE APPROVALS IC: 7847A-RX42 Changes or modifications to your device not expressly approved by the party responsible for compliance can void the user's authority to operate the equipment. RX-42 - declaration of conformity E114214 We, the party responsible for compliance, declare under our sole responsibility that the Handset Integration product RX-42 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at: © 2008 NAVTEQ B.V. All rights reserved. 287 Appendices E114220 TYPE APPROVALS TYPE APPROVALS Laser sensor E97713 E97714 SD Logo is a trademark. E132582 288 Appendices WARNINGS Invisible laser radiation. Do not view directly with optical instruments (magnifiers). Class 1M laser product. WARNINGS IEC 60825-1: 1993 + A2:2001. Complies with FDA performance standards for laser products except for deviation pursuant to Laser Notice No. 50, dated July 26th, 2001. Item Specification Max average power 45mW Pulse duration 33ns Wavelength 905nm ELECTROMAGNETIC COMPATIBILITY TYPE APPROVALS EU Declaration WARNINGS Your vehicle has been tested and certified to legislations relating to electromagnetic compatibility (72/245/EEC, UN ECE Regulation 10 or other applicable local requirements). It is your responsibility to ensure that any equipment you have fitted complies with applicable local legislations. Have any equipment fitted by properly trained technicians. Hereby, Valeo declares that this short range device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Certificate for United Arab Emirates The RF (radio frequency) transmitter equipment (e.g. cellular telephones, amateur radio transmitters etc.) may only be fitted to your vehicle if they comply with the parameters shown in the table below. There are no special provisions or conditions for installations or use. E125209 Do not mount any transceiver, microphones, speakers, or any other item in the deployment path of the airbag system. Do not fasten antenna cables to original vehicle wiring, fuel pipes and brake pipes. 289 Appendices WARNINGS Keep antenna and power cables at least 10 centimetres (4 inches) from WARNINGS any electronic modules and airbags. 1 2 3 4 E85998 Frequency Band Maximum output power Watt (Peak MHz RMS) Antenna Positions 1 – 30 50 W 3, 4 30 – 54 50 W 1, 2, 3 68 – 87.5 50 W 1, 2, 3 142 – 176 50 W 1, 2, 3 380 – 512 50 W 1, 2, 3 806 – 940 10 W 1, 2, 3 1200 – 1400 10 W 1, 2, 3 1710 – 1885 10 W 1, 2, 3 1885 – 2025 10 W 1, 2, 3 Note: After the installation of RF transmitters, check for disturbances from and to all electrical equipment in the vehicle, both in the standby and transmit modes. Check all electrical equipment: • with the ignition ON • with the engine running • during a road test at various speeds. 290 Appendices Check that electromagnetic fields generated inside the vehicle cabin by the transmitter installed do not exceed applicable human exposure requirements. 291 292 Index A Audible Warnings and Indicators..............73 Automatic transmission.....................................73 Door open................................................................74 Frost...........................................................................73 Key outside car......................................................73 Lights on...................................................................74 Low fuel....................................................................74 Seat belt reminder...............................................74 Switching the chimes on and off....................73 A/C See: Climate Control..........................................94 About This Manual...........................................7 ABS See: Brakes............................................................132 ABS driving hints See: Hints on Driving With Anti-Lock Brakes.................................................................132 Audio Control....................................................41 Type 1.........................................................................41 Type 2.......................................................................42 ACC See: Adaptive cruise control (ACC)............148 Audio introduction.......................................227 Audio system security................................234 Audio troubleshooting...............................244 Audio unit commands...............................250 Accessories See: Parts and Accessories.................................7 See: Using Adaptive Cruise Control............150 Active City Stop.............................................162 Auxiliary input.....................................................254 CD Player..............................................................250 External devices - iPod....................................256 External devices - USB....................................254 Radio........................................................................251 Principle of Operation.......................................162 Active Park Assist.........................................143 Principle of Operation.......................................143 Adaptive cruise control (ACC)................148 Principle of Operation.......................................148 Audio unit menus........................................238 Audio unit operation...................................235 Audio unit overview....................................228 Auto-Dimming Mirror...................................66 Autolamps........................................................48 Automatic Climate Control........................97 Adaptive cruise control (ACC) See: Using Adaptive Cruise Control............150 Adjusting the Headlamps - Vehicles With: Adaptive Front Lighting/Xenon Headlamps.....................................................51 Adjusting the Steering Wheel.....................41 Air Conditioning Air distribution.......................................................99 Blower......................................................................98 Cooling the interior quickly...............................99 Mono mode............................................................98 Recirculated air.....................................................99 Setting the temperature...................................98 Switching off the automatic climate control.................................................................99 Switching the air conditioning on and off..........................................................................99 To switch mono mode back on......................98 To switch mono mode off................................98 Windscreen defrosting and demisting........99 See: Climate Control..........................................94 Air Vents............................................................94 Centre air vents.....................................................94 Side air vent...........................................................95 Alarm..................................................................39 Principle of Operation........................................39 Alternative frequencies.............................238 Appendices....................................................287 Arming the alarm...........................................40 Arming the engine immobiliser................38 At a Glance........................................................10 Front exterior overview.......................................10 Instrument panel overview................................12 Rear exterior overview.........................................15 Vehicle interior overview......................................11 Automatic Main Beam Control.................48 Activating the system.........................................49 Manually overriding the system.....................50 Setting the system sensitivity.........................49 293 Index C Automatic Transmission............................129 Emergency park position release lever......................................................................131 Hints on driving with an automatic transmission....................................................130 Selector lever positions....................................129 Sport mode and manual shifting.................130 Capacities and Specifications................223 Technical Specifications.................................223 Cargo Nets......................................................165 Cargo net...............................................................166 Luggage retention net.......................................165 Automatic volume control.......................238 Autostore control.........................................236 Autowipers........................................................43 Auxiliary Heater.............................................102 Car Wash See: Cleaning the Exterior..............................204 Catalytic Converter......................................124 Driving with a catalytic converter.................124 Diesel auxiliary heater (depending on country)............................................................104 Fuel operated heater (depending on country)............................................................104 Parking heater......................................................102 Changing a Bulb.............................................55 Approach lamp......................................................57 Central high mounted brake lamp.................61 Front fog lamps....................................................58 Headlamp...............................................................55 Interior lamps.........................................................61 Luggage compartment lamp, footwell lamp and tailgate lamp.............................................61 Number plate lamp..............................................61 Rear lamps - 4 door............................................59 Rear lamps - 5 door............................................58 Side repeater..........................................................57 Auxiliary input (AUX IN) socket................113 Auxiliary Power Points..................................111 B Battery connection points........................207 Blind Spot Monitor........................................66 Blind spot information system (BLIS).........66 Detection errors....................................................68 System detection and alerts............................67 Turning the system on and off.........................67 Using the system.................................................66 Changing a Fuse............................................179 Changing a Road Wheel...........................208 Assembling the wheel brace.........................210 Installing a road wheel......................................212 Jacking and lifting points................................209 Locking wheel nuts...........................................208 Removing a road wheel.....................................211 Removing the wheel trim..................................211 Vehicle jack..........................................................208 Vehicles with a spare wheel.........................208 Bluetooth setup...........................................245 Handling of phones..........................................245 Requirements for Bluetooth connection.......................................................245 Bonnet Lock See: Opening and Closing the Bonnet.......190 Changing the remote control battery.............................................................29 Booster cables See: Jump-Starting the Vehicle...................206 Booster cushion (Group 3)...............................20 Booster seat (Group 2)......................................20 Remote control with a folding key blade....................................................................29 Remote control without a folding key blade....................................................................30 Brake and Clutch Fluid Check................200 Brakes................................................................132 Changing the Vehicle Battery..................207 Changing the Wiper Blades.......................45 Principle of Operation.......................................132 Rear window wiper blade.................................46 Windscreen wiper blades.................................45 Booster Seats..................................................20 Bulb changing See: Changing a Bulb..........................................55 Checking the Wiper Blades........................45 Childminder Mirror.........................................112 Child Safety........................................................17 Bulb Specification Chart.............................62 294 Index D Child Safety Locks..........................................22 Electric child safety locks..................................22 Manual child safety locks..................................22 Diesel Particulate Filter...............................118 Child Seat Positioning...................................18 Child Seats.........................................................17 Regeneration.........................................................118 Digital signal processing (DSP).............238 Child restraints for different mass groups...................................................................17 Changing the DSP settings............................238 DSP equaliser......................................................238 DSP occupancy..................................................238 Cigar Lighter......................................................111 Cleaning the Exterior..................................204 Direction Indicators........................................52 Disabling the passenger airbag.................27 Body paintwork preservation.......................204 Cleaning the chrome trim..............................204 Cleaning the headlamps................................204 Cleaning the rear window..............................204 Disabling the passenger airbag......................28 Enabling the passenger airbag.......................28 Fitting the passenger airbag deactivation switch...................................................................27 Cleaning the Interior...................................204 Instrument cluster screens, LCD screens, radio screens..................................................205 Rear windows.....................................................205 Seat belts.............................................................204 Disarming the alarm.....................................40 Vehicles with keyless entry..............................40 Vehicles without keyless entry.......................40 Disarming the engine immobiliser...........38 Dog Guard.......................................................166 Climate Control..............................................94 Principle of Operation........................................94 Installing behind the front seats..................166 Installing behind the rear seats.....................167 Climate control commands....................262 Climate..................................................................262 DPF Clock....................................................................111 Coded keys.......................................................38 Cold Weather Precautions........................176 Compact disc playback............................240 Compact disc player..................................240 Compact disc track scanning..................241 See: Diesel Particulate Filter...........................118 Driver Alert......................................................154 Principle of Operation.......................................154 Driving Hints....................................................176 Driving Through Water................................176 Driving through water .......................................176 Type 1.......................................................................241 Type 2 and 3..........................................................241 E Connecting an external device...............266 Connection..........................................................266 Eco Mode.........................................................122 Connecting an external device - Vehicles With: Bluetooth.........................................266 Electric exterior mirrors................................65 Connecting a Bluetooth audio device................................................................266 Electric folding mirrors.......................................65 Mirror tilting positions.........................................65 Connectivity...................................................265 Electric sunroof.............................................100 General Information.........................................265 Opening and closing the sunroof..................101 Opening and closing the sunroof automatically...................................................101 Sunroof anti-trap protection..........................101 Sunroof relearning.............................................102 Sunroof safety mode........................................102 Tilting the sunroof...............................................101 Principle of Operation.......................................122 Convenience features...................................111 Coolant Check See: Engine Coolant Check............................199 Cornering Lamps............................................52 Cruise Control................................................146 Principle of Operation.......................................146 Cruise control Electromagnetic compatibility..............289 Ending compact disc playback..............242 Engine Block Heater.....................................119 See: Using Cruise Control................................146 Cup Holders.....................................................112 Rear seat armrest................................................112 295 Index Engine Coolant Check................................199 Fuse Box Locations......................................178 Checking the coolant level.............................199 Topping up............................................................199 Engine compartment fuse box......................178 Load compartment fuse box.........................178 Passenger compartment fuse box...............178 Engine immobiliser........................................38 Fuses.................................................................178 Fuse Specification Chart...........................180 Principle of Operation........................................38 Engine Oil Check..........................................198 Checking the oil level........................................199 Topping up............................................................199 Engine compartment fuse box.....................180 Load compartment fuse box.........................185 Passenger compartment fuse box..............183 Engine Oil Dipstick - 1.6L Duratec-16V Ti-VCT (Sigma).........................................198 Engine Oil Dipstick - 1.6L Duratorq-TDCi (DV) Diesel/2.0L Duratorq-TDCi (DW) Diesel.............................................................198 Engine Oil Dipstick - 1.6L EcoBoost SCTi (Sigma).........................................................198 Engine Oil Dipstick - 2.0L Duratec-HE (MI4)..............................................................198 Exterior Mirrors................................................64 G Gauges...............................................................69 Engine coolant temperature gauge...............70 Fuel gauge...............................................................70 Gearbox See: Transmission..............................................129 General Information on Radio Frequencies...................................................29 Glasses Holder................................................112 Global Opening and Closing......................36 Manual folding mirrors.......................................64 F Global closing........................................................36 Global opening......................................................36 Fastening the seat belts..............................25 Fast forward/reverse..................................240 First Aid Kit.......................................................177 Floor Mats.........................................................113 Fog Lamps - Front H Handbrake See: Front Fog Lamps........................................50 See: Parking Brake..............................................132 Fog Lamps - Rear Hazard Warning Flashers.............................51 Headlamp adjustment See: Rear Fog Lamps.........................................50 Forward alert function................................152 See: Adjusting the Headlamps - Vehicles With: Adaptive Front Lighting/Xenon Headlamps.........................................................51 Adjusting the warning sensitivity..................152 Switching the system on and off..................152 Front Fog Lamps............................................50 Fuel and Refuelling......................................123 Headlamp Levelling.......................................51 Recommended headlamp levelling switch positions..............................................................51 Technical Specifications...................................127 Fuel Burning Heater See: Auxiliary Heater.........................................102 Headlamp Washers......................................45 Head Restraints............................................106 Fuel Consumption........................................127 Fuel Consumption Adjusting the head restraint..........................106 Removing the head restraint..........................107 See: Technical Specifications.........................127 Heated Seats..................................................110 Heated Windows and Mirrors.................100 Fuel filler flap..................................................124 Refuelling with a fuel can................................126 Heated exterior mirrors....................................100 Heated windows................................................100 Fuel Quality - Diesel.....................................123 Heating Long-term storage.............................................124 Fuel Quality - E85.........................................123 See: Climate Control..........................................94 Hill launch assist (HLA) Long-term storage..............................................123 Fuel Quality - Petrol.....................................123 See: Using hill start assist...............................134 296 Index Hill Start Assist..............................................134 Instrument Lighting Dimmer......................111 Interior Lamps.................................................53 Principle of Operation.......................................134 Hints on Driving With Anti-Lock Brakes.............................................................132 HLA Ambient lighting...................................................53 Interior lighting......................................................53 Introduction.........................................................7 iPod connection See: Hill Start Assist..........................................134 See: Using hill start assist...............................134 See: Connecting an external device...........266 See: Connecting an external device - Vehicles With: Bluetooth.............................................266 I iPod Ignition Switch................................................114 Immobiliser See: Using an iPod............................................268 ISOFIX Anchor Points....................................21 See: Engine immobiliser....................................38 Attaching a child seat with top tethers.........21 Top tether anchor points - 4 door vehicles.................................................................21 Top tether anchor points - all vehicles..........21 Important audio information...................227 Audio unit labels.................................................227 Disc labels.............................................................227 Information Displays.....................................75 J General Information............................................75 Information Messages.................................83 Jump starting Active City Stop....................................................84 Airbag.......................................................................84 Alarm........................................................................84 Automatic main beam control.......................84 Battery and charging system...........................85 Blind spot monitor...............................................85 Child power lock...................................................85 Climate control.....................................................85 Cruise control and Adaptive cruise control (ACC)...................................................................86 Doors open.............................................................86 Driver alert..............................................................86 Engine immobiliser..............................................87 Hill start assist.......................................................87 Keyless entry..........................................................87 Lane keeping aid..................................................88 Lighting....................................................................88 Maintenance..........................................................89 Message indicator................................................83 Occupant protection..........................................89 Parking aid..............................................................89 Parking brake.........................................................90 Power steering......................................................90 Stability control (ESP)......................................90 Starting the engine.............................................90 Start-stop................................................................91 Transmission..........................................................92 Tyre pressure monitoring system...................93 See: Jump-Starting the Vehicle...................206 Jump-Starting the Vehicle.......................206 To connect the booster cables....................206 To start the engine............................................207 K Keyless Entry....................................................34 Disabled keys.........................................................35 General information............................................34 Locking and unlocking the doors with the key blade............................................................36 Locking the vehicle..............................................34 Passive key..............................................................34 Unlocking the vehicle..........................................35 Keyless Starting.............................................116 Failure to start.......................................................117 Ignition on...............................................................117 Starting a diesel engine.....................................117 Starting with automatic transmission.........117 Starting with manual transmission...............117 Stopping the engine when the vehicle is moving................................................................118 Stopping the engine with the vehicle stationary...........................................................118 Keys and Remote Controls.........................29 Instrument Cluster........................................69 297 Index L Manual Seats.................................................105 Adjusting the angle of the seatback...........106 Adjusting the height of the driver’s seat.....................................................................106 Adjusting the lumbar support.......................106 Moving the seats backwards and forwards............................................................105 Lane Departure Warning...........................156 Principle of Operation.......................................156 Lane Keeping Aid..........................................158 Principle of Operation.......................................158 Lighting Control...............................................47 Manual Transmission..................................129 Headlamp flasher.................................................47 Home safe lighting..............................................48 Lighting control positions..................................47 Main and dipped beam......................................47 Parking lamps........................................................47 Selecting reverse gear.......................................129 Map updates.................................................286 Message Centre See: Information Displays.................................75 Mirrors Lighting...............................................................47 Load Carriers See: Heated Windows and Mirrors..............100 See: Windows and Mirrors................................63 See: Roof Racks and Load Carriers.............168 MP3 connection Load Carrying.................................................164 Loading the navigation data..........................276 See: Connecting an external device...........266 See: Connecting an external device - Vehicles With: Bluetooth.............................................266 Locking and Unlocking.................................32 MP3 display options....................................241 General Information..........................................164 Loading the navigation data....................276 CD text display options....................................242 Double locking.......................................................32 Locking.....................................................................32 Locking and unlocking confirmation.............33 Locking and unlocking the doors from inside....................................................................33 Locking the doors individually with the key.........................................................................33 Luggage compartment lid................................33 Unlocking.................................................................32 MP3 file playback.........................................241 Playing a multi session disc............................241 N Navigation introduction.............................270 General Information.........................................270 Navigation Quick start................................277 Vehicles with CD-SD navigation system or Sony CD-SD navigation system..............278 Vehicles with mobile navigation system................................................................277 Locks...................................................................32 Luggage Anchor Points..............................164 Luggage Covers.............................................164 M Navigation system.......................................283 Navigation unit overview...........................272 Vehicles with CD-SD navigation system...............................................................273 Vehicles with Sony CD-SD navigation system...............................................................275 Maintenance..................................................190 General Information..........................................190 Technical Specifications..................................201 Manual Climate Control..............................95 News broadcasts.........................................238 Air conditioning.....................................................96 Air distribution control.......................................95 Blower......................................................................96 Heating the interior quickly..............................96 Recirculated air.....................................................96 Ventilation..............................................................96 O Occupant protection.....................................24 Principle of Operation.........................................24 Oil Check See: Engine Oil Check.......................................198 On/off control...............................................235 298 Index Opening and Closing the Bonnet...........190 Rear Window Wiper and Washers...........44 Closing the bonnet..............................................191 Opening the bonnet..........................................190 Intermittent wipe.................................................44 Rear window washer..........................................45 Reverse gear wipe................................................45 P Principle of Operation.......................................136 Refuelling - E85.............................................126 Refuelling.........................................................126 Regional mode (REG)................................239 Remote control battery Parking Brake..................................................132 Parts and Accessories.....................................7 See: Changing the remote control battery.................................................................29 Parking Aids....................................................136 Remote control programming Look for the Ford logo on the following parts .......................................................................8 Now you can be sure that your Ford parts are Ford parts.......................................................7 See: Programming the remote control........29 Removing a Headlamp................................54 Repairing Minor Paint Damage..............205 Repeat compact disc tracks...................240 Personalised Settings..................................82 Chime deactivation.............................................83 Language setting..................................................82 Measure units........................................................83 Temperature units...............................................83 Type 1.....................................................................240 Type 2 and 3........................................................240 Retractable tow ball....................................170 Driving with a trailer............................................172 Fault conditions...................................................172 Maintenance.........................................................172 Releasing the tow ball arm.............................170 Swivelling the tow ball arm in........................172 Swivelling the tow ball arm out......................171 Power Door Locks See: Locking and Unlocking.............................32 Power Seats...................................................108 Power Windows..............................................63 Anti-trap function................................................63 Driver's door switches........................................63 Global opening and closing.............................63 Opening and closing the windows automatically....................................................63 Resetting the memory of the electric windows.............................................................64 Safety switch for rear windows......................63 Road Safety...................................................270 Safety information..............................................271 Roadside Emergencies................................177 Roof Racks and Load Carriers.................168 Installing the crossbars....................................168 Roof rack...............................................................168 Route displays..............................................284 Programming the remote control............29 Junction zoom....................................................284 Map display.........................................................284 Navigation display.............................................284 Programming a new remote control............29 Reprogramming the unlocking function...............................................................29 Route options menu...................................283 Folding the rear seatbacks forwards..........109 Folding the seatbacks up.................................110 Folding the seat cushions and the rear seatbacks forwards......................................109 Driver......................................................................283 Dynamic................................................................283 Eco settings.........................................................283 Ferry/motorail.....................................................283 Motorway..............................................................283 Route......................................................................283 Seasonal roads..................................................284 Toll...........................................................................283 Toll sticker............................................................284 Rear view camera........................................140 Running-In.......................................................176 Principle of Operation......................................140 Brakes and clutch...............................................176 Engine......................................................................176 Tyres.........................................................................176 R Rear Fog Lamps.............................................50 Rear Seats.......................................................109 299 Index S Steering Wheel Lock....................................114 Vehicles with keyless starting.........................114 Vehicles without keyless starting..................114 Safety Precautions.......................................123 Satellite Navigation Unit Holder..............113 Adjusting the holder............................................113 Steering Wheel................................................41 Sunroof Seat belt height adjustment......................26 Seat belt reminder.........................................26 Switching Off the Engine............................119 Deactivating the seat belt reminder..............27 Rear seat belt reminder......................................27 Symbols Glossary.............................................7 See: Electric sunroof.........................................100 Vehicles with a turbocharger..........................119 Symbols in this handbook...................................7 Symbols on your vehicle.......................................7 Seat belts See: Fastening the seat belts...........................25 System settings...........................................280 Seats.................................................................105 Security code.................................................234 Shuffle/random...........................................240 Audio settings......................................................281 Clock settings......................................................282 Menu structure - Information and entertainment display - All vehicles..............................................................281 Menu structure - Information and entertainment display - Vehicles with navigation system........................................280 Type 1.....................................................................240 Type 2 and 3........................................................240 Sitting in the Correct Position..................105 Snow Chains See: Using Snow Chains...................................217 Sound button................................................235 Speed Control T See: Cruise Control............................................146 Speed Limiter.................................................153 Technical Specifications Principle of Operation.......................................153 Stability Control............................................133 See: Capacities and Specifications............223 Principle of Operation.......................................133 Telephone commands...............................257 Cold or hot engine...............................................116 Create a phonebook........................................260 Main settings........................................................261 Phone......................................................................257 Phone functions.................................................258 Starting and Stopping the Engine...........114 Telephone controls.....................................246 Starter Switch See: Ignition Switch............................................114 Starting a Diesel Engine..............................116 General Information...........................................114 Remote control..................................................246 Starting a Petrol Engine - E85..................115 Telephone setup..........................................245 Starting at low ambient temperatures ...............................................................................116 Bond another Bluetooth phone...................246 Making a phone an active phone................246 Phonebook...........................................................245 Phonebook categories.....................................246 Starting a Petrol Engine..............................115 Cold or hot engine...............................................115 Engine idle speed after starting.....................115 Flooded engine.....................................................115 Telephone.......................................................245 General Information.........................................245 Telephone Start-Stop.......................................................120 See: Using the telephone...............................246 Principle of Operation.......................................120 Station preset buttons..............................236 Station tuning control................................235 DAB service linking............................................235 Manual tuning.....................................................235 Scan tuning..........................................................235 Seek tuning..........................................................235 300 Index Tow Ball............................................................173 Tyre Pressures Driving with a trailer...........................................174 Driving without a trailer.....................................175 Inserting the tow ball arm................................174 Maintenance.........................................................175 Removing the tow ball arm.............................175 Unlocking the tow ball arm mechanism.......................................................173 See: Technical Specifications........................218 Tyre Repair Kit................................................213 Checking the tyre pressure..............................215 General information...........................................213 Inflating the tyre..................................................214 Using the tyre repair kit.....................................213 Tyres Towing a Trailer.............................................170 See: Wheels and Tyres....................................208 Steep gradients...................................................170 U Towing Points................................................188 Installing the towing eye.................................188 Towing eye location...........................................188 Under Bonnet Overview - 1.6L Duratec-16V Ti-VCT (Sigma)...............192 Under Bonnet Overview - 1.6L Duratorq-TDCi (DV) Diesel...................194 Under Bonnet Overview - 1.6L EcoBoost SCTi (Sigma)..............................................193 Under Bonnet Overview - 2.0L Duratec-HE (MI4).....................................195 Under Bonnet Overview - 2.0L Duratorq-TDCi (DW) Diesel..................197 USB port............................................................113 USB Towing the Vehicle on Four Wheels..........................................................188 All vehicles............................................................188 Vehicles with automatic transmission....................................................189 Towing...............................................................170 Track selection.............................................240 Type 2 and 3........................................................240 Traffic information control.......................236 Activating traffic announcements..............236 Ending traffic announcements.....................237 Traffic announcement volume......................237 See: Using a USB device.................................267 Traffic Message Channel..........................285 Using Active City Stop................................162 Principle of Operation......................................285 Switching the system on and off..................163 Traffic Sign Recognition............................160 Using active park assist..............................143 Using Adaptive Cruise Control................150 Principle of Operation......................................160 Transmission..................................................129 Trip Computer.................................................82 Automatic deactivation.....................................151 Changing the set speed...................................150 Setting a speed...................................................150 Setting the vehicle gap....................................150 Switching the system off..................................151 Switching the system on.................................150 Temporarily deactivating the system...........151 Average fuel consumption...............................82 Average speed.......................................................82 Distance to empty...............................................82 Instantaneous fuel consumption..................82 Odometer................................................................82 Outside air temperature....................................82 Resetting the trip computer.............................82 Trip Odometer.......................................................82 Using an iPod................................................268 Audio control.......................................................269 Operation.............................................................268 Type approvals.............................................287 Using a USB device.....................................267 Certificate for United Arab Emirates..........289 EU Declaration...................................................289 FCC/INDUSTRY CANADA NOTICE.............287 Laser sensor........................................................288 RX-42 - declaration of conformity..............287 Audio control......................................................268 Operation..............................................................267 Tyre Care..........................................................216 Tyre Pressure Monitoring System...........217 System reset.........................................................218 301 Index Using Cruise Control...................................146 Using the speed limiter...............................153 Cancelling the set speed.................................146 Changing the set speed...................................146 Resuming the set speed...................................147 Setting a speed...................................................146 Switching cruise control off............................147 Switching cruise control on............................146 Intentionally exceeding the set speed limit.....................................................................153 Setting the speed limit.....................................153 Switching the system on and off..................153 System warnings................................................153 Using the telephone...................................246 Using driver alert...........................................154 Using Eco mode............................................122 Changing the active phone............................248 Debonding a bonded phone.........................248 Making a call........................................................247 Muting the microphone..................................248 Receiving an incoming call............................248 Receiving a second incoming call...............248 Resetting Eco mode...........................................122 Using TMC......................................................285 Using hill start assist...................................134 Ending traffic announcements....................285 Traffic announcement.....................................285 Using TMC messages......................................285 Resetting the system........................................155 Switching the system on and off..................154 System display....................................................155 System warnings................................................154 Activating the system.......................................134 Deactivating the system..................................134 Vehicles with manual transmission only......................................................................134 Using traffic sign recognition...................160 Setting the system speed warning..............160 Switching the system on and off.................160 System display....................................................160 Using lane departure warning.................156 Setting the steering wheel vibration level.....................................................................157 Setting the system sensitivity........................157 Switching the system on and off..................156 System warnings.................................................157 Using voice control.....................................249 Name tag..............................................................250 System operation..............................................249 Using Winter Tyres........................................217 Using seat belts during pregnancy...........27 Using Snow Chains.......................................217 V Vehicles with stability control (ESP)...........217 Using Stability Control................................133 Using start-stop............................................120 Vehicle battery.............................................206 Vehicle Care..................................................204 Vehicle Identification Number................222 Vehicle Identification Plate.......................221 Vehicle identification...................................221 Vehicle recovery............................................188 Ventilation To re-start the engine.........................................121 To stop the engine..............................................120 Using the lane keeping aid........................158 Switching the system on and off..................158 System warnings................................................159 Using the Parking Aid - Vehicles With: Front and Rear Parking Aid.....................137 See: Climate Control..........................................94 Vents Manoeuvring with the parking aid...............138 Switching the parking aid on and off...........137 See: Air Vents........................................................94 VIN Using the Parking Aid - Vehicles With: Rear Parking Aid.........................................136 Using the Rear View Camera...................140 See: Vehicle Identification Number.............222 Voice control.................................................249 Principle of Operation......................................249 Voice Control...................................................42 Activating the rear view camera...................140 Deactivating the rear view camera..............142 Using the display..................................................141 Vehicles with parking aid.................................142 302 Index W Warning Lamps and Indicators..................71 ABS warning lamp................................................71 Airbag warning lamp............................................71 Blind spot monitor indicator..............................71 Brake system lamp...............................................71 Cruise control indicator.......................................71 Direction indicators...............................................71 Engine warning lamp...........................................71 Forward alert warning indicator......................72 Front fog lamp indicator.....................................72 Frost warning lamp..............................................72 Glow plug indicator..............................................72 Headlamp indicator.............................................72 Ignition warning lamp.........................................72 Lane departure warning indicator..................72 Low fuel level warning lamp.............................72 Low tyre pressure warning lamp.....................72 Main beam indicator............................................72 Message indicator.................................................72 Oil pressure warning lamp................................72 Rear fog lamp indicator......................................73 Seat belt reminder...............................................73 Stability control (ESP) indicator.....................73 Start-stop indicator.............................................73 Warning Triangle............................................177 Washer Fluid Check...................................200 Washers See: Wipers and Washers.................................43 Washing See: Cleaning the Exterior..............................204 Waveband button........................................235 Wheels and Tyres........................................208 General Information.........................................208 Technical Specifications..................................218 Windows and Mirrors....................................63 Windscreen Washers....................................44 Windscreen Wipers.......................................43 Automatic wiper system...................................43 Intermittent wipe.................................................43 Winter Tyres See: Using Winter Tyres....................................217 Wipers and Washers.....................................43 303 304 (CG3568en)