Official Software
Kia - cee'd - Owners Manual - (2018)
£9.99
Get your hands on the complete Beijing factory workshop software
Download now
Check out our popular Beijing Other Model Manuals below:
Get your hands on the Complete Beijing Factory Workshop Software
Download now9.99
Get notified when we add a new BeijingOther Model Manual
Summary of Content
ENGLISH
CAR NAVIGATION SYSTEM SIMPLE MANUAL
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
РУССКИЙ
SVENSKA
PORTUGUÊS
DANSK
ČEŠTINA
POLSKI
SLOVENČINA
TÜRKÇE
KOREAN
NORSK
MAGYAR
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 1
2018-02-13
10:09:44
Precautions for safety
Precautions for safety
Safety Notes
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with the arrowhead symbol
within an equilateral triangle is intended
to alert the user about the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Always operate the vehicle in a safe manner.
Do not be distracted by the vehicle while
driving and always be fully aware of all driving
conditions. Do not change settings or any
functions.
Pull over in a safe and legal manner before
attempting such operations.
When driving your vehicle, be sure to keep the
volume of the unit low enough to allow you to
hear sounds coming from the outside.
To promote safety, certain functions are
disabled unless the parking brake is on.
Do not drop it and avoid heavy impacts at
anytime.
To reduce the risk of electric shock, do not
remove the cover or back of this product.
There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
The driver should not watch the monitor while
driving. If the driver watches the monitor while
driving, it may lead to carelessness and cause
an accident.
To reduce the risk of fire or electric shock,
do not expose this product to dripping or
splashing water, rain, or moisture.
2
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 2
2018-02-13
10:09:44
Table of contents
Table of contents
Precautions for safety
2
Safety Notes�������������������������������������������������������2
Searching for destination
13
Head unit�������������������������������������������������������������4
Steering wheel remote control�������������������������6
Address Search�������������������������������������������������13
POI (Points of interest)������������������������������������13
Kia service ���������������������������������������������������������14
Coordinates �������������������������������������������������������14
Previous destinations���������������������������������������15
Address book�����������������������������������������������������15
Load tour�����������������������������������������������������������15
My POI ���������������������������������������������������������������16
Home, Office, Favourites���������������������������������17
Radio Operation
7
Bluetooth® Wireless Technology 18
Listening to AM���������������������������������������������������7
Listening to DAB/FM�������������������������������������������7
Pairing and connecting the unit and a
Bluetooth phone�����������������������������������������������18
Making a call by entering phone number�������19
Making a call by redialling �������������������������������19
Answering/Rejecting a call�������������������������������19
Switching call to the mobile phone�����������������19
Ending a call�������������������������������������������������������19
Using the menu during a phone call���������������20
Calling list�����������������������������������������������������������20
Contacts�������������������������������������������������������������20
Favourites ���������������������������������������������������������21
Table of contents
3
Name of each component
4
USB Operation
8
Playing USB music�����������������������������������������������8
Viewing USB image���������������������������������������������9
iPod Operation
11
Playing iPod�������������������������������������������������������11
Bluetooth® audio
Connected Services
22
Before using Connected Services �������������������22
Features�������������������������������������������������������������23
Additional information
26
12
Playing Bluetooth audio�����������������������������������12
3
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 3
2018-02-13
10:09:44
Name of each component
Name of each component
Head unit
1
2
3
4
5
1. RADIO button
Converts to the last played radio mode
(DAB/FM,AM).
2. MEDIA button
If a playable media is connected, press
the button to move to the corresponding
screen. If you want to select another
media connected, press the button on the
media screen.
3. WSEEK/TRACKS button
‐‐ When it is pressed for a short time
• AM mode: plays previous/next available
frequency.
• DAB/FM mode: plays previous/next
available station existion within [List]
menu. (If there is none of one station
in the [List] menu, the “Auto tuning”
function is executed.)
• MEDIA mode: plays previous/next file.
(except for AUX)
‐‐ When it is pressed and held
• AM mode: plays previous/next available
frequency.
• DAB/FM mode: plays previous/next
available station existing within [List]
menu.
• MEDIA mode (except for Bluetooth,
AUX and Android Auto): rewinds of fast
forwards the file.
4. Reset hole
Press with a thin object to reset the unit
when it does not operate normally.
5. • 1 button
‐‐Power on
Press this button in system OFF status.
‐‐Power off
Press and hold this button in power ON
status.
• Volume control knob (-)
Turn anti(clockwise) or clockwise to control
volume.
• AV on/off
Press this button to turn AV on or off in
power ON status.
4
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 4
2018-02-13
10:09:44
Name of each component
6
7
8
9
10
11
6. MAP button
‐‐Press to display the map screen of the
current location.
‐‐Press to repeat the voice guidance on the
map screen when a route is set. (Voice
guidance for road names and numbers is
not supported in some countries.)
9. SETUP button
Press to go to the [Settings] menu.
10.
button
‐‐AM mode: turn left/right to tune
manually.
‐‐DAB/FM mode: turn left/right to search
for a desired station and then press.
7. NAV button
Press to move to the navigation menu
screen.
‐‐MEDIA mode (except for Bluetooth, AUX,
Apple CarPlay and Android Auto): turn
left/right to search for the desired file
and press.
8.
‐‐Navigation mode: turn left/right to
change the map scale on the map screen.
(Custom button)
Press to go to the [Custom button
settings] menu. After setting, press to use
desired function.
11. Cover for protecting SD card
(SD card insert slot)
Insert the SD card into the slot.
5
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 5
2018-02-13
10:09:44
Name of each component
Steering wheel remote control
1
2
3
4
5
6
1.
2.
button
• Each time this button is pressed, the
Radio or Media mode is changed. You can
select the modes to toggle in settings.
• If the media is not connected, it is changed
in the order DAB/FM > AM > DAB/FM.
• button
Press to mute the sound. (It will be paused
in some media modes.)
4.
button
Press to switch to voice recognition mode
when the phone supporting Android
Auto/Apple CarPlay function is connected.
To cancel it, press the button again.
3. • Volume (VOL+/VOL-) button
Increases or decreases the volume level.
/
button
• MEDIA mode (except for Bluetooth,
AUX and Android Auto): rewinds or fast
forwards the file.
5.
‐‐ When it is pressed for a short time.
button
Press to operate Bluetooth hands-free
function.
• Press to accept a call.
• Press to make a call from last calls.
• Press and hold for redialling.
• Radio (DAB/FM, AM) mode: plays
previous/next favourites.
• MEDIA mode: plays previous/next file.
(except for AUX)
‐‐ When it is pressed and held
• AM mode: plays previous/next available
frequency.
• DAB/FM mode: plays previous/next
stations.
6.
button
• Press to end the phone call during a call.
• Press to reject the call in the incoming call
screen.
6
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 6
2018-02-13
10:09:44
Radio Operation
Radio Operation
Listening to AM
1. Press [RADIO] on the head unit.
2. Press [AM] on the screen.
The AM screen of the most recently
listened station is displayed.
Note
Each time the [RADIO] button on the head unit
is pressed, the mode is changed in the order
DAB/FM > AM > DAB/FM.
3. Auto tuning (When there are no or one
station in [List] menu):
Note
Each time the [RADIO] button on the head unit
is pressed, the mode is changed in the order
AM > DAB/FM > AM.
3. Auto tuning:
• Press [WSEEK/TRACKS] on the head
unit.
‐‐Plays previous/next available station.
Manual tuning:
• Turn [
] (anti)clockwise.
‐‐The frequency moves up and down
accordingly.
Favourites tuning:
Press [Favourites]. Press the favourites
numbers of the desired broadcast station.
• Press [WSEEK/TRACKS] on the head
unit.
‐‐Plays previous/next available station.
List tuning (When there are two or more
stations in [List] menu):
• Press [WSEEK/TRACKS] on the head
unit.
‐‐Drag the station bar to the left/right to
find the radio station that you want.
‐‐Press [C/V].
• Turn [
] to the left/right and
then press when the desired station is
displayed in a highlighted colour.
Favourites:
• Press [Favourites]. Press the favourites
numbers of the desired broadcast
station.
• Press [W/S] on the steering wheel
remote control.
‐‐Plays previous/next available station
existing within [List] menu.
Manual tuning:
• In the FM mode, press [Menu] > [Manual
tune FM].
Station bar
Listening to DAB/FM
1. Press [RADIO] on the head unit.
2. Press [DAB/FM] or [FM] on the screen.
The DAB/FM screen of the most recent
listened to station is displayed.
7
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 7
2018-02-13
10:09:45
USB Operation
USB Operation
Playing USB music
You can play music files stored in a USB
memory device.
Skip
Scan
You can play the previous or next file.
This function plays the first 10 seconds of
each song in the media directory as a preview.
1. Press [
].
Position
Connect a USB device to the USB port and
playback starts automatically.
Screen
Description
• Press [C/V].
• Pressing [C] after 3
seconds of playback time
plays the current file from
the beginning.
Head unit
• Press [WSEEK/TRACKS].
• Pressing [TRACKS] after 3
seconds of playback time
plays the current file from
the beginning.
Note
To play USB music while a different source is
playing, press [MEDIA] > [USB Music].
Search
You can fast rewind/forward to a specific point
of a file.
Pause
You can pause the playing file.
Press [M] during playback.
Press [d] to play it again.
2. Select the desired mode by pressing
] repeatedly.
[
•[
]: Plays the first 10 seconds of
each song.
Description
•[
]: Plays the first 10 seconds of
each song within the current folder.
Screen
Press and hold [C/V] and
then release at the point you
want.
•[
]: Plays the first 10 seconds of
each song within the [Artist], [Song],
[Album], or [Recently added].
Head unit
Press and hold [WSEEK/
TRACKS] and then release at
the point you want.
Position
8
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 8
2018-02-13
10:09:45
USB Operation
Repeat
Shuffle
You can play a set of files repeatedly.
1. Press [
].
You can play files in random order.
1. Press [
].
Viewing USB image
You can view image files saved in a USB
memory device.
1. Connect a USB device to the USB port.
2. Press [MEDIA] > [USB Image].
Note
If you want to remove the USB, remove the
USB after selecting any other function.
Switching to menu screen or full
screen
2. Select the desired mode by pressing
] repeatedly.
[
•[
2. Press [
] again to turn shuffle off.
(If there is no operation for 10 seconds on
menu screen mode, it switches to full screen
mode.)
]: Plays all files sequentially.
•[
]: Repeats all files within the
current folder.
•[
Press the screen repeatedly.
Skip
]: Repeats the current file, only.
You can view the previous or next image by
sliding to the left/right.
•[
]: Plays the files sequentially
within the [Artist], [Song], [Album], or
[Recently added].
(If there is an unsupported image file, the
image is changed automatically every 5
seconds until the normal image is displayed.)
Zoom in/out
You can enlarge or reduce the image.
Press [
/
] in menu screen or double-tap
the screen quickly.
9
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 9
2018-02-13
10:09:45
USB Operation
Rotating image
Slideshow
You can rotate the image in a clockwise
direction.
You can set the slideshow interval. The
slideshow is played according to the time
interval.
Press [Rotate] in menu screen repeatedly.
Info
1. Press [Slideshow].
This menu shows the file name, image size
and file type of the current image.
Press [Info].
2. Select the slideshow interval.
The slideshow is played.
Notes
• Press the screen once to stop the slideshow.
• Slideshow is not available while driving.
(Because of traffic regulations, slideshow is
only available when your vehicle is parked.)
10
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 10
2018-02-13
10:09:45
iPod Operation
iPod Operation
Playing iPod
1. Use an iPod exclusive cable to connect an
iPod to USB connector.
Repeat
Shuffle
You can play a set of files repeatedly.
1. Press [
].
You can play files in random order.
1. Press [
].
2. Select the desired mode by pressing
] repeatedly.
[
2. Press [
2. Press [MEDIA].
To play an iPod while a different source is
playing, press [MEDIA] > [iPod].
Pause
You can pause the playing file. For details refer
to page 8 (“Pause”).
Skip
You can play the previous or next file. For
details refer to page 8 (“Skip”).
Search
You can fast rewind/forward to a specific point
of a file. For details refer to page 8 (“Search”).
•[
]: Plays all files sequentially.
•[
]: Repeats the current file, only.
] again to turn shuffle off.
11
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 11
2018-02-13
10:09:45
Bluetooth® audio
Bluetooth® audio
Playing Bluetooth audio
Starting the Bluetooth audio
Pause
• Music stored in the mobile phone can be
played in the car through Bluetooth audio
streaming.
1. Connect your Bluetooth device to the head
unit.
Press [
Press [
2. Press [MEDIA].
• Bluetooth audio can be played only when a
Bluetooth phone or Bluetooth audio device
has been connected. To play Bluetooth audio,
connect the Bluetooth phone to the car
system. For more information on connecting
Bluetooth, please refer to the owner’s
manual [Pairing and connecting the unit and
a Bluetooth phone] on page 18.
The Bluetooth audio screen is displayed.
Skip
You can play the previous or next file.
For details refer to page 8 (“Skip”).
Repeat
You can play a set of files repeatedly.
Select the desired mode by pressing
] repeatedly.
[
• If Bluetooth is disconnected while playing
Bluetooth audio, the audio stream will be
interrupted.
• The audio streaming function may not be
supported in some mobile phones. Only one
function can be used at a time. You can
not use the Bluetooth hands-free and the
Bluetooth audio function at the same time.
For example, if you convert to the Bluetooth
hands-free while playing Bluetooth audio, the
music stream is paused.
] during playback.
] to play it again.
Shuffle
Note
To play Bluetooth audio while a different
source is playing, press [MEDIA] > [Bluetooth
Audio].
You can play files in random order.
Select the desired mode by pressing
] repeatedly.
[
Note
These features may not be supported in some
Bluetooth devices.
• Playing music from the car is not possible
when there are no music files saved in the
mobile phone.
12
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 12
2018-02-13
10:09:45
Searching for destination
Searching for destination
Address Search
You can find the destination by searching for
an address.
1. Press [NAV] > [Address].
3. Press [Set as destination].
4. Press [Start guidance].
Note
The destination is saved in the [Previous
destinations] menu automatically, refer to
page 15.
2. Enter the name of the Country, City/
Postcode, Street/No., House number or
Intersection corresponding to the desired
destination.
POI (Points of interest)
You can set a POI as destination using different
search methods.
1. Press [NAV] > [POI].
2. Tap on one of the search methods.
• [Along route]: finds POI along route.
• [Near current position]: finds POI near
current vehicle position.
• [Near destination]: finds POI near
selected destination.
• [Near scroll mark]: Search for POI’s
around the current cursor when the map
is scrolled.
• [Name]: finds POI by the name of the
facility.
• [Near city centre]: finds POI located in a
specific city.
13
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 13
2018-02-13
10:09:45
Searching for destination
Kia service
Name
Coordinates
You can set the facilities of Kia dealers as
destination.
You can search for a Kia dealers by entering its
name using the keypad.
You can find a destination by entering the
coordinates of latitude and longitude.
Near current position
1. Press [NAV] > [Kia service] > [Name].
1. Press [NAV] > [Coordinates].
You can obtain search results near your
current position.
2. Select the preferred country.
1. Press [NAV] > [Kia service] > [Near current
position].
3. Enter the dealer name and press [OK].
4. Press the preferred item from the list.
• Press [Distance], [Name] or [Category]
to arrange the list in distance, name or
category order.
2. Press the preferred item from the list.
3. Follow steps 3-4 of the “Address Search”
on page 13.
5. Follow steps 3-4 of the “Address Search”
on page 13.
2. Press [D˚M΄S˝], [D˚M΄] or [Decimal].
3. Enter the coordinates and press [OK].
4. Follow steps 3-4 of the “Address Search”
on page 13.
Note
The information for the dealers facilities
may not correspond with a result of map
information, since the information can be
provided up to date.
14
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 14
2018-02-13
10:09:45
Searching for destination
Previous destinations
Address book
Load tour
You can select one of the locations you have
previously searched for as a destination,
tourpoint and start point.
You can select a destination from a location
saved in the [Address book] menu. To utilize
this function more effectively, destinations
that you often travel to should be saved in
advance.
This function can be used to set a route with
several tourpoints.
1. Press [NAV] > [Previous destinations].
First of all, store in the [Address book] menu
through the destination search function.
1. Press [NAV] > [Address book].
You can find the destination to a location saved
in the [Load tour] menu. To utilize this function
more effectively, destinations that you often
travel to should be saved in advance.
Searching for tour
1. Press [NAV] > [Load tour].
• Press [Date], [Name] or [Category]
to arrange the list in date, name or
category order.
• Press [Menu] > [Delete] to delete the
previous destinations. Select the desired
item, then press [Delete] > [Yes].
• Press [Date], [Name] or [Category]
to arrange the list in date, name or
category order.
‐‐[Mark all]: Marks all items.
‐‐[Unmark all]: Unmarks all items.
2. Press the preferred item from the list.
3. Follow steps 3-4 of the “Address Search”
on page 13.
• Press [Date] or [Name] to arrange the
list in date or name order.
2. Press the preferred item from the list.
2. Select the desired item.
3. Follow steps 3-4 of the “Address Search”
on page 13.
3. Press [OK] > [Start guidance].
15
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 15
2018-02-13
10:09:45
Searching for destination
Deleting the tour
My POI
1. Press [Menu] > [Delete] in load tour list.
This function is used to import personal POI
data including the map information (position,
name...) saved in USB memory device.
Afterwards the data can be selected as
destination through the My POI menu.
4. Press [Yes].
The list of POI groups is displayed.
Note
Supported POI group formats.
• POI group format: “.kml”/ “.gpx”
2. Select the desired item, then press [Delete]
> [Yes].
• Press [Date] or [Name] to arrange the
list in date or name order.
• [Mark all]: Marks all items.
• [Unmark all]: Unmarks all items.
Importing the POI data
5. Select the desired POI group.
1. Store the POI file including map
information (position, name...) from web
map in USB memory device.
2. Connect the USB device to the USB port.
3. Press [NAV] > [My POI] > [
].
• Press [Mark all] to select all POI groups.
• Press [Unmark all] to unmark all POI
groups.
6. Press [Import].
The POI groups is imported.
Or press [SETUP] > [Navigation] > [My
data] > [Import My POI from USB].
16
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 16
2018-02-13
10:09:46
Searching for destination
Notes
• If data stored to the USB use a different
coordinate system with the current system,
the importing position might be different
from existing one.
• Make sure that the POI data is normally
imported.
Finding a destination by My POI
1. Press [NAV] > [My POI].
2. Select the POI group.
The list of POI is displayed.
Home, Office, Favourites
If your home location, office location,
and favourite locations are already in the
[Favourites] menu they can be easily retrieved
by tapping on them.
First of all, store home, office or favourites in
the [Favourites] menu through the destination
search function.
Registering Home, Office or
Favourites
1. Press [NAV] > [Favourites].
5. Input the desired name and press [OK].
It is saved in the [Favourites] menu
automatically.
Finding your Home, Office, or
Favourite place
1. Press [NAV] > [Favourites] > [Home],
[Office], or favourite place.
2. Press [Start guidance].
3. Press the preferred item from the list.
4. Follow steps 3-4 of the “Address Search”
on page 13.
Note
The destination is saved in the [Previous
destinations] menu automatically, refer to
page 15.
2. Press [Home], [Office], or [Favourite (1~6)].
3. Select the desired position through the
destination search function.
4. Press [OK] when the destination search is
complete.
17
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 17
2018-02-13
10:09:46
Bluetooth® Wireless Technology
Bluetooth® Wireless Technology
Pairing and connecting the
unit and a Bluetooth phone
To use the Bluetooth feature, make sure the
Bluetooth on your phone is turned on. Refer to
your phone’s user guide.
When no phones have been paired
1. Press [ ] > [All menus] > [Phone]. Or press
[ ] on the steering wheel remote control.
• [Cancel]: Cancels Bluetooth connection.
2. In your phone, initiate a search for
Bluetooth devices. (The default vehicle
name is KIA MOTORS.)
3. 1) If the SSP (Secure Simple Pairing) is not
supported, enter the passkey on your
Bluetooth device. (The default passkey
is 0000.)
2) If the SSP (Secure Simple Pairing) is
supported, press [Yes] on the pop-up
screen of your Bluetooth device.
(The pop-up screen may differ from the
actual information of the Bluetooth
device.)
4. Bluetooth device is connected.
The mobile phone contacts and the calling
list are downloaded.
When the connection fails, failure message
is displayed on the screen.
2) When using [
] button, press [
].
When a phone is already paired
1. Press [ ] > [All menus] > [Phone]. Or press
[ ] on the steering wheel remote control.
2. Press the device from the Bluetooth device
list pop-up screen.
If you want to pair additional device, press
[Add new]. Follow steps 3-4 of “When no
phones have been paired”.
When pairing additional device
1. 1) When
using [SETUP] button, press
[SETUP] > [Bluetooth] > [Bluetooth
connections].
2. 1) Select the device you want to connect.
2) If
there is no device you want to
connect, press [Add new].
3. In your phone, initiate a search for
Bluetooth devices. (The default vehicle
name is KIA MOTORS.)
4. 1) If the SSP (Secure Simple Pairing) is not
supported, enter the passkey on your
Bluetooth device. (The default passkey
is 0000.)
2) If the SSP (Secure Simple Pairing) is
supported, press [Yes] on the pop-up
screen of your Bluetooth device.
(The pop-up screen may differ from
the actual information of the Bluetooth
device.)
18
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 18
2018-02-13
10:09:46
Bluetooth® Wireless Technology
5. Bluetooth device is connected.
The mobile phone contacts and the calling
list are downloaded.
When the connection fails, failure message
is displayed on the screen.
Answering/Rejecting a call
1. If there is an incoming call, a popup
message will appear.
2. Press [Accept] in the popup message or
[ ] on the steering wheel remote control.
Making a call by entering
phone number
Connect your unit and Bluetooth phone before
making a call.
1. Enter the phone number using the keypad
on the phone screen.
2. Press [ ] on the phone screen or [
the steering wheel remote control.
Note
If you press the wrong number, press [
delete one digit of the entered number.
] on
] to
Making a call by redialling
Press and hold [ ] on the phone screen or
[ ] on the steering wheel remote control.
Note
Redialling is not possible when there is no
number in the dialled calls list.
As shown below, the call is switched to the
mobile phone.
To reject a call, select [Reject] in the popup
message or [
] on the steering wheel
remote control.
Notes
• If the Call-ID service is available, the caller’s
phone number is displayed.
• If a caller’s phone number is saved in the
phone book, the caller’s name is displayed on
the unit.
• Upon receiving a call, the [Reject] function
may not be supported in some mobile
phones.
Switching call to the mobile
phone
1. If you want to switch the call to the mobile
phone while talking on the car hands-free,
press [Use private] on the screen or press
and hold [ ] on the steering wheel remote
control.
2. If you want to switch the call to the car
hands-free while talking on the mobile
phone, press [Use hands-free] on the
screen or press and hold [ ] on the
steering wheel remote control.
The call is switched to the car hands-free.
Ending a call
1. To end a call, press [ ] on the phone
screen or [
] on the steering wheel
remote control.
2. The call is ended.
19
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 19
2018-02-13
10:09:46
Bluetooth® Wireless Technology
Using the menu during a
phone call
When making a call, you can use the following
menu items.
Calling list
Contacts
Making a call from calling list
Making a call from contacts
1. Press [ ] on the phone screen or [
the steering wheel remote control.
] on
1. Press [ ] on the phone screen.
The contacts are displayed on the screen.
E
D
A
Position
A
B
C
Description
Switches a voice call from the
car hands-free to the mobile
phone.
B
Ends a call.
C
Moves to a screen for
entering ARS numbers.
D
Sets the microphone volume.
E
Mutes/unmutes the
microphone volume.
2. Press [All], [Dialled], [Received], or
[Missed].
2. Select the contact you want to call from
the list of contacts.
• [All]: Displays all calling list.
• [Dialled]: Displays the outgoing calling list.
• [Received]: Displays the incoming calling
list.
• [Missed]: Displays the missed calling list.
3. Press the entry you want to call.
Note
The calling list may not be saved in some
mobile phones.
20
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 20
2018-02-13
10:09:46
Bluetooth® Wireless Technology
Searching by name or number
Favourites
You can search contacts for the name or
number that you enter.
Calling Favourites
1. Press [ ] > [Menu] > [Search] on the
phone screen.
If the phone number has already been stored
in the Favourites, it can be easily called by
tapping on it.
First of all, add the phone number in the
Favourites. Refer to the “Adding as a
Favourite” on page 21.
1. Press [
] on the phone screen.
2. Select one of the contacts.
2. Enter the name or number, press [OK].
3. Select the contact you want to call.
2. Select the desired favourite.
Adding as a Favourite
Up to 20 contacts can be added to [Favourites]
menu.
1. Press [
screen.
3. Press [
] > [Close] > [
].
Note
If the phone numbers have already been
stored in the Favourites, you can add or delete
them by pressing [Menu] > [Edit].
] > [Add new] on the phone
21
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 21
2018-02-13
10:09:47
Connected Services
Connected Services
Before using Connected
Services
What is Connected Services?
Connected Services use TomTom LIVE Service
to allow users to receive additional information
in their car navigation system through the
mobile phone network.
Traffic
Delivers the most accurate traffic information
every two minutes. If you set the destination,
you can have recommendation to recalculate
the route according to the traffic condition.
Weather information
Delivers weather information and forecast for
five days, and delivers weather information of
the major European cities on the map.
Connecting phone for using
Connected Services
1. Activate a Wi-Fi hotspot on your mobile
phone, and search for Wi-Fi networks. (For
details refer to your mobile phone's user
manual.)
Note
By creating a Wi-Fi Hotspot, you may incur
additional data charges depending on your
data plan, particularly when roaming. The
battery of the mobile phone may drain
quickly so consider charging the phone
while using Connected Services.
2. Press [SETUP] > [Wi-Fi].
3. Press [Wi-Fi].
Especially, you can connect a hidden Wi-Fi
Network.)
Note
When you connect the Network for the first
time, the information sharing notice screen
is displayed. Read carefully and then press
[Agree].
Speed Camera Alerts
Delivers camera alerts with accurate and
timely speed warnings.
Live POI (Points of interest)
Delivers POI search results based on the real
time location information.
4. Press [Wi-Fi network list]. Select the
desired Network. (If you want to connect
the Wi-Fi Network manually, press [Add
Wi-Fi network].
22
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 22
2018-02-13
10:09:47
Connected Services
Features
2. Press the desired items.
Traffic
• [Near current position]: Searches POI
near current vehicle position.
The current traffic/road event information is
basically displayed on the traffic information
list. This feature may not be supported
depending on condition.
1. Press [
]>[
2. Press [Near current position] or [Near
destination].
• [Near destination]: Searches POI near
selected destination.
3. Enter the desired POI (Points of interest)
name and press [OK].
] > [Traffic].
• [Previous]/[Next]: Toggles through
different traffic events.
• [Show on map]: Displays map screen for
selected area.
• [Recalculate]: Recalculates the route by
reflecting traffic information.
• It is displayed only when there is traffic
information along route after a route is
set.
Live POI (Points of interest)
• The total delay time will be displayed
on title. This can be different from sum
of each delay times due to roundingoff.
Searching for POI by [Near current
position] or [Near destination]
1. Press [ ] > [ ] > [Live POI].
4. Select the desired destination.
5. Follow steps 3-4 of the “Address Search”
on page 13.
Searching for POI by [Near city centre]
1. Press [ ] > [ ] > [Live POI] > [Near city
centre].
You can set a POI as destination using different
search methods.
2. Enter the desired city name and press
[OK].
3. Enter the desired POI (Points of interest)
name and press [OK].
23
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 23
2018-02-13
10:09:47
Connected Services
4. Select the desired destination.
Weather
5. Follow steps 3-4 of the “Address Search”
on page 13.
This provides weather forecast for the next
day including the current day, for the current
position and destination.
Searching for POI by [Near scroll mark]
1. Perform a long press on the desired map
area. The selected point will be centred
on the screen and the scroll mark will be
displayed.
1. Press [ ] > [ ] > [Weather] > [Current
position] or [Destination].
• [Current position]: Displays weather
information in your current position.
2. Press [
mark].
]>[
• [Destination]: Displays weather
information in your destination.
] > [Live POI] > [Near scroll
3. Enter the desired POI (Points of interest)
name and press [OK].
Setting Favourites
If your favourite locations have already been
saved in the [Favourites] menu, you can check
weather information for favourite locations
easily.
1. Press [ ] > [ ] > [Weather] >
[Favourites] > [Menu] > [Add].
2. Search the city name and select the
desired city.
3. Press [Add to favourites].
2. Press the desired list for more weather
information.
4. Select the desired destination.
5. Follow steps 3-4 of the “Address Search”
on page 13.
24
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 24
2018-02-13
10:09:47
Connected Services
4. Press the desired list for more weather
information.
Speed Camera Alerts
1. Press [SETUP] > [Navigation] > [Guidance].
Notes
• You can also add the current position or
destination as favourites.
3. Press [MAP].
The alert for speed camera appears about
10 seconds or 100 m before the camera
point of arrival.
• Press [ ] > [ ] > [Weather] > [Current
position] or [Destination] > [Menu] > [Add].
Deleting Favourites
1. Press [ ] > [ ] > [Weather] >
[Favourites] > [Menu] > [Delete].
2. Press [Camera alert] or [Danger zone
alert].
The using notice screen is displayed. Read
carefully and then press [Agree] to use the
function.
2. Select the desired item, then press [Delete]
> [Yes].
• [Mark all]: Marks all items.
• [Unmark all]: Unmarks all items.
Notes
• The [Camera alert] or [Danger zone alert] is
displayed only when the Wi-Fi Network has
been connected.
• According to the country legislation, the
[Camera alert] might be changed to [Danger
zone alert].
• According to the country legislation, the
[Camera alert] or [Danger zone alert] might
not be available.
Notes
• Depending on the region and the type of
speed camera, the image might differ.
• You can request the related information
update by pressing the speed camera
information icon.
--When the camera alert appears but there
is no speed camera, you can report to
TomTom to delete the camera information
by pressing the speed camera image.
--When the speed camera appears but
there is no camera alert, you can report
to TomTom by pressing the speed camera
report button.
25
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 25
2018-02-13
10:09:47
Additional information
Additional information
Imprint:
The navigation system is provided by
Specification
Supported Profile
KIA MOTORS Europe GmbH
Theodor-Heuss-Allee 11
D-60486 Frankfurt am Main
Tel.: +49 (0) 69 8509280
Fax: +49 (0) 69850928499
E-Mail: [email protected]
Register Court: Frankfurt am Main
Register number: HRB 53714
Represented by: Yongkew Park (CEO), Michael Cole (COO),
Seung Jong Hong (CFO)
VAT ID: DE 222 535 439.
Supported Bluetooth
Bluetooth Specification
Frequency Range
HFP 1.6, A2DP 1.2,
AVRCP 1.5, PBAP 1.1
3.0
2402 MHz ~ 2480 MHz
Output Power (Class2) Maximum 4.0 dBm
Wi-Fi
Declaration of Conformity
Hereby, Kia Motors declares that the radio equipment type AVN is
in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.kia.com/eu
For consideration of the user, this device should be installed and operated
with a minimum distance of 20 cm between the device and the body.
Number of Channels
79
Standard
IEEE 802.11 a/b/g/n/ac
Frequency Range /
Output Power
2402 to 2480 MHz /
Maximum 20 dBm
5725 to 5850 MHz /
Maximum 14 dBm
26
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 26
2018-02-13
10:09:47
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 27
2018-02-13
10:09:47
Support - Hotline
Web Site: http://www.navigation.com/kia
International Toll Free Number: 00800 18 23 53 22
Telephone number for all other countries (or if Toll Free
numbers are not supported): +31 555 384 245
* To view the instructions of advanced features, please
contact your authorised dealer for assistance with the
owner’s manual.
P/N: MFL69963507
1 MAPM7200EYB.AEU1K (YB CUV (STONIC))_QRG ENG MFL70370551.indd 28
2018-02-13
10:09:47
