Original BMW Accessories.
Installation Instructions.
M Performance Mirror Cap Retrofit
BMW 1 Series (F20, F21)
BMW X1 (E84N)
BMW 3 Series (F30, F31, F34, F35)
BMW 4 Series (F32, F33, F36)
Retrofit kit number
51 16 2 211 904
Right mirror cover
51 16 2 211 905
Left mirror cover
Installation time
The installation time is approx. 0.50 hours. This may vary depending on the condition of the car and the
equipment in it.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety
regulations.
If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for
mechanical work and 1.0 hour for electrical work.
To avoid unnecessary extra work and/or costs, an inquiry is to be sent straight away to the technical parts support
via the After Sales Assistance Portal (ASAP).
Quote the following information:
- Chassis number,
- Retrofit kit part number,
- A detailed description of the problem,
- Any work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are made via ASAP!
© BMW AG, Munich.
01 29 2 295 442
06/2013
(T/Z)
1
Pictograms
Denotes instructions that draw your attention to dangers.
!
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or warning text.
Installation information
All pictures show LHD cars; proceed accordingly on RHD cars.
The installation of the M Performance mirror cap is shown only on the left-hand side. Proceed accordingly on the
right-hand side.
Ordering instructions
None
Special tools required
None
© BMW AG, Munich.
01 29 2 295 442
06/2013
(T/Z)
2
Table of contents
Section
Page
1
Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
2
Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
3
Installing the M Performance mirror cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
© BMW AG, Munich.
01 29 2 295 442
06/2013
(T/Z)
3
1.
Parts list
A
B
C
F20 0060 V
Legend
A
M Performance mirror cap
B
Screw (3 x)
C
Shim (3 x)
© BMW AG, Munich.
01 29 2 295 442
06/2013
(T/Z)
4
2.
Preparatory work
The following components must be removed first of all
ISTA No.
Mirror glass
51 16 026
© BMW AG, Munich.
01 29 2 295 442
06/2013
(T/Z)
5
3.
Installing the M Performance mirror cap
Break off the three lugs (1) from the mirror casing (2).
1
2
F20 0061 V
The M Performance mirror cap A must audibly
engage in the lug (1).
Place M Performance mirror cap A from above onto the
mirror casing (2), allowing lug (1) to engage as you do so.
A
2
1
F20 0062 V
Note the sequence when screwing the components
into place.
B
1.
2.
Screw in screw B from the front together with shim C first
in the centre (1), then on the outside (2) and finally on the
inside (3).
3.
C
Install the mirror glass as per ISTA No. 51 16 026.
F20 0063 V
© BMW AG, Munich.
01 29 2 295 442
06/2013
(T/Z)
6