Aston Martin - Valkyrie - Owners Manual - 2012 - 2012

Aston Martin Vehicle Maintenance Check Sheet Always use body interior and exterior protection and the correct grades of lubricants and fluids. Tick the box in column "C" when the check is complete and tick in column "A" if corrective work is necessary. FULLY CLEAN THE VEHICLE AND THE WORK AREA. 12 Months 10,000 mls 16,000 km 24 months 20,000 mls 32,000 km x x x x Owner: Date Vehicle Reg. No.: Key No.: Model/Derivative: Odometer (km/mls): VIN: Dealer Job/Invoice No.: Pre-Maintenance x - Every 6 years Every 10 years 60,000 mls 100,000 mls 96,000 km 160,000 km Every 4 years or 40,000 mls (64,000 km) Every 4 years or 40,000 mls (64,000 km) x x Every 5 years or 50,000 mls (80,000 km) x x Every 12 months Every 24 months x x x x x x x x x x x x x x x x x A - x A 12 Months 10,000 mls 16,000 km 24 months 20,000 mls 32,000 km Install the vehicle protection kit and wing covers Do a check of the Campaign Status Fluid, Filters and Inspect for Leaks x x x x x x x Every 3 years or 30,000 mls (48,000 km) C x Examine the engine for oil leaks Renew the engine oil (use the correct specification) Renew the engine oil filter Renew the air cleaner element(s) (V12 Engines) C x x x x Renew the air cleaner element(s) (V8 Engines) x x Examine the transmission and final drive for condition and leaks. Fill if necessary x x x x Do a check of the manual transaxle oil level. Fill if necessary Renew the manual transaxle oil and clean the filter Renew the automatic differential oil and clean the filter Examine the engine cooling and occupant heating system for condition and leaks. Fill if necessary Renew the engine coolant - 50/50 concentration Examine the condition and attachment of the fuel system, hoses, pipes and unions for leaks Renew the brake/clutch fluid (use the correct specification) (V12 engines) Renew the brake/clutch fluid (use the correct specification) (V8 engines) Examine the brake/clutch fluid level. Fill if necessary Examine the condition and attachment of the power steering system, hose, pipes and unions Examine the power steering fluid level and fill if necessary Examine the condition and attachment of the brake system, hoses, pipes and unions Examine the condition of the suspension dampers for leaks Examine the condition of the exhaust system for leaks Examine the level of the the windscreen and headlamp washer reservoir. Fill if necessary Do a check of the exhaust bypass valve operation at 800/3000 rpm Model Applicability: V8 and V12 Vantage, Vantage S, DB9, DBS, Rapide, Virage. For all other models please use the applicable Maintenance Check Sheet. x x x x Every 4 Years or 40,000 miles (64,000 km) x x x x x x x x x x x x x x x x - x x x - x Examine the condition and attachment of the air conditioning system, hoses, pipes and unions. Use UV to do a check for leaks Renew the pollen filter Mechanical Function Check C A Examine the condition, attachment, correct operation and lubricate all door locks, latches, hinges and joints. Examine the condition, attachment, correct operation and lubricate the bonnet catch. Examine the condition, attachment, correct operation and lubricate the secondary bonnet catch(es). Examine the condition and tension of the accessory drive belt. Adjust or replace if necessary Examine the cooling pack radiator, condenser and transmission cooler for blockage and unwanted material. Clean if necessary Examine the condition and attachment of the cooling system hoses Examine the condition and attachment of the air conditioning hoses Clean the throttle butterflies (V12 only) Examine the condition and attachment of the wiper blades. Replace if necessary Examine the condition and operation of all seat belts and buckles Examine the condition and attachment of the rear view mirror Examine the condition and attachment of the handbrake and the handbrake pads Examine the condition, attachment and adjustment of the handbrake cables. Adjust if necessary Examine the condition of the brake pads, brake discs and calipers. At 60% wear, replace the brake pads and pad wear sensors. For CCM Brakes, at every 3rd pad change, clean, dry, weigh and examine the condition of the brake discs Examine the condition and attachment of front brake disc shields for fatigue, cracks and the clearance from the discs Examine the condition and attachment of all suspension, ball joints, gaiters, bushes and fixings Examine the condition and attachment of the driveshafts Examine the condition and attachment of the exhaust system, mountings and heatshields Examine the condition and attachment of the wheel arch liners and the underbody protection Note: For maximum customer satisfaction, we recommend that you do a road test before the maintenance is done, and again when the work is complete. Maintenance time intervals should always be obeyed, even with low service mileages, to keep the vehicle at the best performance and condition. Issue 3, After Sales Operations, July 2012 Aston Martin Vehicle Maintenance Check Sheet 12 Months 10,000 mls 16,000 km 24 months 20,000 mls 32,000 km Every 70,000 mls (112,000 km) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Electrical Function Test Anti Corrosion Check x x C A Renew the spark plugs Measure and record the battery voltage Examine the condition and attachment of the battery connections. Adjust if necessary Do a functional test of the battery disconnect switch Examine the condition and attachment of all lamp units Do a check of the headlamp alignment. Adjust if necessary Do a functional test of all of the lights and the auto-sense function Do a functional test of all warning indicators Do a functional test of the audible warnings and security system Do a functional test of the horns Do a functional test of the windscreen wipers and auto-sense function Do a functional test of the windscreen and headlamp washers Examine the condition and attachment of the door mirrors Do a functional test of the fold-back door mirrors Do a functional test of the electrically operated windows Do a functional check of the service indicator. Reset the indicator Renew the batteries in the remote key fobs Renew the tracker tags (where applicable) 12 Months 10,000 mls 16,000 km 24 months 20,000 mls 32,000 km x x x x x x x x x x x x x x x x x Make sure that the tyres are the correct size, type and orientation Measure and record the tyre tread depth Examine the tyres for uneven or excessive wear or damage Measure and if necessary, adjust the tyre pressures Do a torque check of the road wheel nuts Examine the road wheel rims for inside or outside damage. Record all damage Make sure that the colour coded tyre pressure monitor system valve caps are on the correct wheels (if applicable) Do a functional test of the tyre pressure sensors Do a check of the date of the tyre inflation kit x x x x x x x x x x Degrease the windscreen Do a road test Do a functional test of the ABS and the traction control operation Make sure that the drain for the fuel filler bowl is clear Do a functional test of the adaptive damping system Wheels and Tyres Check Final Checks C C A C A A Examine the body panels and under body for corrosion. Work from the inside out (do not include stone chips) Tyre Wear Report Comments CW Rotation Outer Centre Inner Outer Centre Across Tyre Across Tyre Left Front (mm) Right Front (mm) Left Rear (mm) Right Rear (mm) Inner Valve 90° 120° 270° Tyre Pressure CW Rotation Valve 90° 120° 270° Technician Dealer Stamp Tyre Pressure Name Fuel Level Sign and Date Record the fuel level when the vehicle arrives at your Dealership. Always fill the fuel tank before you return the vehicle (chargeable) Maintenance time intervals should always be obeyed, even with low service mileages, to keep the vehicle at the best performance and condition. Open Circuit Battery Voltage _____ . _____ Volts To remove the surface charge: Set the ignition to ON Set the headlamps to ON for 4 mins. Set the headlamps to OFF for 2 mins. Set the ignition to OFF Test the battery voltage Issue 3, After Sales Operations, July 2012