Technical Service Bulletin
93 High-voltage battery charger control module reports under wrong diagnostic address after being
replaced
93 22 68 2063427/2 February 15, 2022. Supersedes Technical Service Bulletin Group 93 number 21-52
dated June 3, 2021 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
e-tron
quattro
2019
All
Not Applicable
e-tron
Sportback
quattro
2020
All
Not Applicable
All
Not Applicable
e-tron
quattro, and
2021 – 2022
e-tron
Sportback
quattro
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised Header (Model Year 2022 added)
1
07/03/2021
Initial publication
Customer states:
• The high-voltage battery charger control module, J1050 (address word 00C6) has been replaced due to a fault.
Workshop findings:
• After the vehicle’s high-voltage battery charger control module, J1050 is replaced, the new unit no longer
reports in the diagnostic scan tool under address word 00C6 but instead reports under address word 8113.
Technical Background
The replacement part needs to have the diagnostic address/address word changed.
© 2022 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Production Solution
Not applicable.
Service
If the concern occurs after the component is replaced, proceed as following using the diagnostic scan tool. Using
Guided Functions select:
1. High-Voltage Battery Charger Control Module 2, J1239 (Diagnostic address 8113).
2. 8113 - High-Voltage Battery Charger Control Module 2, functions.
3. 8113 - Change diagnostic address from 8113 to 00C6.
4. Run the test plan and the scan tool will correct the diagnostic address.
5. Check that the high-voltage battery charger control module, J1050 is now reporting in the scan tool under
address word 00C6 and high-voltage battery charger control module 2, J1239 is no longer reporting under
address word 8113.
6. Finish the replacement test plan for replacement of the high-voltage battery charger control module, J1050.
Warranty
This TSB simply provides extended repair instructions; it should not be used for separate billing. The extra time
needed should be included in the GFF time for the repair you were currently working on.
Additional Information
All part and service references provided in this TSB (2063427) are subject to change and/or removal. Always check
with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2022 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time
© 2022 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
© 2022 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.