Hyundai - Santa FE - Owners Manual - 2020 - 2020

£9.99

Get your hands on the complete Hyundai factory workshop software

Download now

Check out our popular Hyundai Other Model Manuals below:

Hyundai Diesel Engine D4EA Workshop Manual PDF

Hyundai Santa Fe Workshop Manual (V6-2.7L (2003))

Hyundai Santa Fe Gls Workshop Manual (V6-2.7L (2002))

Hyundai Entourage Workshop Manual (V6-3.8L (2009))

See All

Hyundai Diesel Engine D4EA Workshop Manual PDF

Hyundai Santa Fe Workshop Manual (V6-2.7L (2003))

Hyundai Santa Fe Gls Workshop Manual (V6-2.7L (2002))

Hyundai Entourage Workshop Manual (V6-3.8L (2009))

See All

Get your hands on the Complete Hyundai Factory Workshop Software

Download now

9.99

Summary of Content

VOICE RECOGNITION TIPS BLUETOOTH® Command Dial Call ☐ BLUE LINK (If equipped) Example “Dial 7-1-4-9-6-5-3-0-0-0” “Call John Smith” Improving how you store your contacts can optimize your Bluetooth® Voice Recognition performance: • Use full names instead of short or single-syllable names (“John or Dad”) • Avoid using special characters/emojis or abbreviations (“Dr.”) when saving contacts NAVIGATION Command Find Address Find Example “1-2-3-4-5 1st Street, Fountain Valley” -A ssist with creating MyHyundai.com account - Assist with Blue Link enrollment - Show Blue Link User's Manual - Encourage customer to download the MyHyundai with Blue Link app ☐ INTRODUCTION AND LOCATION OF THE SERVICE DEPARTMENT ☐ SET FIRST SERVICE APPOINTMENT ☐ REVIEW FACTORY RECOMMENDED MAINTENANCE SCHEDULE ☐ WAS THE CONDITION OF YOUR VEHICLE (AT DELIVERY) TO YOUR SATISFACTION? “Find McDonald’s®” Located on Rearview Mirror DESTINATION SEARCH BY VOICE Command Find Example “Find Lowe’s® near me” “Starbucks®” MAINTENANCE Scheduled Maintenance (Normal Usage) Engine Oil and Filter Fuel Additives Tire Rotation Vacuum Hose Air Cleaner Filter Climate Control Air Filter (for Evaporator and Blower Unit) Air Conditioning Refrigerant Brake Hoses & Lines Drive Shafts & Boots Front Brake Disc/Pads, Calipers Rear Brake Disc/Pads Steering Gear Box, Linkage & Boots / Lower Arm Ball Joint, Upper Arm Ball Joint Suspension Mounting Bolts Exhaust Pipe & Muffler Fuel Tank Air Filter Vapor Hose & Fuel Filler Cap, Fuel Tank Brake Fluid Parking Brake Fuel Filter Fuel Lines, Fuel Hoses and Connections Drive Belt Spark Plugs Coolant Valve Clearance Automatic Transmission Fluid 2.4 GDI 2.0 T-GDI Replace Add Perform Inspect Inspect Replace 7,500 or 12 mos. 7,500 or 12 mos. 7,500 7,500 or 12 mos. 7,500 or 12 mos. 22,500 or 36 mos. Replace Add Perform Inspect Inspect Replace 6,000 or 12 mos. 6,000 or 12 mos. 6,000 6,000 or 12 mos. 6,000 or 12 mos. 18,000 or 36 mos. Replace Every 12 mos. Replace Every 12 mos. Inspect 7,500 or 12 mos. Inspect 6,000 or 12 mos. Inspect 15,000 or 24 mos. Inspect 12,000 or 24 mos. The Hyundai SANTA FE Quick Reference Guide Inspect 30,000 or 48 mos. Inspect 24,000 or 48 mos. First First 60,000 or 72 mos. 60,000 or 72 mos. Inspect Inspect Subsequent, every Subsequent, every 15,000 or 24 mos. 12,000 or 24 mos. Replace 97,500 Replace 42,000 First First 120,000 or 120 mos. 120,000 or 120 mos. Replace Replace Subsequent, every Subsequent, every 30,000 or 24 mos. 30,000 or 24 mos. Inspect 60,000 or 72 mos. Inspect 60,000 or 72 mos. No checks or services required for Normal Usage driving. *Check the engine oil regularly between recommended oil change intervals. We recommend Quaker State oil. *See Owner's Manual for details regarding Severe Usage maintenance recommendations. Sales Consultant Date Customer Sales Manager Date Looking For more detailed information? This Quick Reference Guide does not replace your vehicle’s Owner’s Manual. If you require additional information or are unsure of a specific issue, We recommend that you always refer to the vehicle’s Owner’s Manual or contact your authorized Hyundai dealer. The information contained in this Quick Reference Guide is correct at the time of printing; however, specifications and equipment can change without notice. No warranty or guarantee is being extended in this Quick Reference Guide, and Hyundai reserves the right to change product specifications and equipment at any time without incurring obligations. Some vehicles are shown with optional equipment. Roadside Assistance: 1-800-243-7766 Date Consumer Affairs: 1-800-633-5151 Email NP150-72020 (Rev 06/04/19) Printing 06/07/19 Sirius XM® Radio: 1-800-967-2346 Blue Link: 1-855-2BLUELINK (1-855-225-8354) HYUNDAI VEHICLE OWNER PRIVACY POLICY Your Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect, use, and share this information. You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com website at https://www.hyundaiusa.com/owner-privacy-policy.aspx If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact our Customer Connect Center at: Hyundai Motor America Hyundai Customer Connect Center P.O. Box 83835 Phoeniz, AZ 85071-3835 800-633-5151 [email protected] Hyundai's Customer Connect Center representatives are available Monday through Friday, between the hours of 5:00 AM and 7:00 PM PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST (English). For Customer Connect Center assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST. Headlights and fog lights Cruise control / Smart cruise control Wiper and washer Navigation Page 07 Page 41 Page 08 Pages 25 FEATURES AND CONTROLS Climate control 13 Cluster help menu 12 Door locks 02 Fuel filler door 02 Headlights and foglights 07 Head-up display (HUD) 06 Homelink wireless garage control system 17 Instrument cluster 09 Instrument cluster settings 12 Instrument panel illumination 12 Interior lights 05 Power liftgate button 06 Remote & Smart key 01 Seat-Headrest adjustment 04 Seat-Rear seat folding 04 Seat-Seat adjustment (front) 03 Seat-Seat belt adjustment 04 Sunroof 05 Trip computer 11 Wiper and washer 08 Wiper blades 08 Warnings and indicators 11 MULTIMEDIA Android Auto™ Apple CarPlay™ AUX, USB and Smartphone Port Blue link telematic system Bluetooth operational tips Bluetooth phone pairing Navigation Radio mode Steering wheel audio control Voice recognition tips Wirelss cellular phone charging system Instrument cluster Climate control Pages 09 Pages 13 WARNING! To reduce the risk of serious injury to yourself and others, read and understand the important SAFETY INFORMATION in your Owner’s Manual. Use this Quick Reference Guide to learn about the features that will enhance your enjoyment of your Hyundai. More detailed information about these features is available in your Owner’s Manual. 27 29 26 21 19 18 25 24 19 20 26 DRIVING Blind Spot Collision Avoidance Assist (BCA)34 Cruise control / Smart cruise control 41 Drive mode 39 Forward Collision-Avoidance assist (FCA) 33 Idle Stop and Go (ISG) 38 Lane Keeping Assist (LKA) 33 Leading vehicle departure alert 42 RearOccupant Alert (ROA) 37 Rear Cross-traffic Collision-Avoidance Assist (RCCA) 35 Safe Exit Assist (SEA) 36 Tire Pressure Monitoring System (TPMS) 40 *Some vehicles may not be equipped with all the listed features. FEATURES AND CONTROLS DOOR LOCKS REMOTE & SMART KEY To access the key hole: Lock Unlock If the smart key is not working properly, there is an alternative way to unlock the doors through the keyhole on the driver’s door. A Liftgate Unlock/Open (Press and hold. Liftgate will open if equipped with Power Liftgate.) 1. Pull open the driver’s door handle A B Panic 2. While holding the door handle open, use mechanical key to release the clip B behind the door handle. 3. Remove the key hole cover C Removing the mechanical key Slide and hold the release button to remove the mechanical key. A C A After removing the cover, turn the key toward the front of the vehicle to unlock and toward the rear of the vehicle to lock. Once the door is unlocked it may be opened by pulling the handle. Driver’s door Lock / Unlock Smart key must be within 28~40in. from the outside door handle. Press: Once - Unlock driver door Twice - Unlock all doors Third - Lock all doors FUEL FILLER DOOR NOTE: User selectable option : Please see section 3 from Owner’s To open fuel filler door: Turn engine off and unlock driver door. Push the fuel filler door in. Pull the fuel filler door outward to access the fuel tank cap. Manual for more details. To unfold the mechanical key, press the release button on the remote. NOTE: The fuel filler door will lock when all doors are locked. 01 HYUNDAI SANTA FE 02 FEATURES AND CONTROLS HEADREST ADJUSTMENT FRONT SEAT ADJUSTMENT (MANUAL) Forward/backward To Raise Headrest: Pull headrest up. To Lower Headrest: Press lock button while pressing down on headrest. To Adjust Headrest Forward: Pull forward to 1 of 3 positions To Adjust Backward: Press lock button and push headrest backwards. A Seat cushion height (for driver’s seat) B Seatback angle C SEAT BELT ADJUSTMENT (Front seat) Pull up to raise. Lumbar support D A B D C Press button and push down to lower. FRONT SEAT ADJUSTMENT (POWER) Forward / backward REAR SEAT FOLDING A 2nd row seat Seat cushion height A Seatback angle B From cargo area 2ND Lumbar support (for driver’s seat) L 2ND C A 03 B L C HYUNDAI To fold the rear seats from the cargo area, push the 2nd row seat back folding switch 1 located on both sides of the tailgate. L: Left seatback folding R: Right seatback folding SANTA FE R R 04 FEATURES AND CONTROLS POWER LIFTGATE BUTTON SUNROOF Sunshade When the ignition is on and the vehicle is in park, the power liftgate can be opened by using the console button on the dash. Before using the power liftgate, make sure it is selected in the User Setting modes in the LCD display. To open the sunshade, pull the sunroof control lever lightly backward to the first detent position. Push the sunroof control lever forward to close. Sliding the Sunroof Tilting the Sunroof To Activate: User Settings → Door → Power Liftgate Adjusting Speed: Pull and hold the sunroof control lever backward to the first detent to open the sunroof incrementally. Pull the sunroof control lever backward past the first detent to slide open the sunroof completely. Push the sunroof control lever forward to the second detent position to close sunroof glass with the sunshade. Push the sunroof control lever upward to tilt open the sunroof. Push again the sunroof control lever upward to tilt the sunroof glass closed. The speed of the power liftgate can be adjusted in the User Settings mode in the LCD display. User Settings → Door → Power Liftgate Speed → Normal/Fast HEAD-UP DISPLAY (HUD) The Head-Up Display is an optional feature that allows the driver to view information projected onto a transparent screen while driving. To Activate: INTERIOR LIGHTS 3 2 Front map lamp Press the lens to turn the map lamp on or off. Front door lamp ( ) 1 1 Select “Head-Up Display on the User Settings mode on the instrument cluster LCD display and select “Enable Head-Up Display” 1 2 Note: If you wear polarizing-filter sunglasses, Lights will turn on when any door is open. Front room lamp ( ) 3 Front room lamp ( ) 4 it’s difficult to read the Head Up Display information. Push the switch to turn the room lamp on. Push the switch to turn the room lamp off. 05 HYUNDAI SANTA FE 06 FEATURES AND CONTROLS WIPER AND WASHER HEADLIGHTS AND FOG LIGHTS MIST - Single wipe Headlight OFF - Off Parking light INT - Intermittent wipe Auto light LO - Normal wiper speed All Lights Off HI - Fast wiper speed Headlight delay Headlights may stay on for 15 seconds after exiting and locking vehicle. Press remote lock button twice to turn headlights off. See Owner’s Manual for more detail. WIPER BLADES A Turn signals and lane change signals Flashing headlights PULL OFF High beam / Smart high beam This vehicle has a “hidden” wiper design which means they cannot be lifted in their bottom resting position Wiper Blade Removal 1. Within 20 seconds of turning off the engine, lift and hold the wiper lever up to the MIST A position for about 2 seconds until the wipers move to the top wipe position. 2. At this position, you are able to lift the wipers off the windshield. 3. Gently put wipers back down onto windshield. Note: To prevent damage to the hood and wiper arms, the 4. Turn the wipers to any ON wiper arms should only be lifted position to return to resting when in the top wiping position. position. Fog light PUSH OFF NOTE To turn off high beam, pull the lever towards you. Smart High Beam Function 1. Select auto position on stalk. 2. Push lever forward to engage Auto High beam. 3. Push lever forward again to disengage. 07 HYUNDAI SANTA FE 08 FEATURES AND CONTROLS INSTRUMENT CLUSTER Type A 5 1 2 6 1 2 5 5 3 5 4 3 4 5 6 Tachometer Speedometer Engine coolant temperature gauge Fuel gauge Warning and indicator lights LCD display (including Trip computer) Type B 5 2 5 4 1 09 5 6 5 HYUNDAI 3 SANTA FE 10 FEATURES AND CONTROLS INSTRUMENT PANEL ILLUMINATION WARNINGS AND INDICATORS Airbag warning light Seat belt warning light Electric Power Steering (EPS) warning light Electronic Brake force Distribution (EBD) System warning light Malfunction Charging system Indicator warning light Lamp (MIL) Engine coolant temperature warning light Engine oil pressure warning light Low fuel level warning light Low Tire Pressure Warning Light/ TPMS system malfunction light Electronic Stability Control (ESC) indicator Electronic Stability Control (ESC) OFF indicator AWD warning light Immobilizer indicator Turn signal indicator SPORT Mode indicator Light (if equipped) Light ON indicator Front fog light indicator High beam indicator Cruise ON indicator Cruise SET indicator AWD LOCK indicator Smart high beam indicator (if equipped) Electric Parking Brake (EPB) warning light (if equipped) Downhill Brake Control (DBC) indicator Automatic Emergency Braking (AEB) warning light (if equipped) AUTO HOLD indicator Light (if equipped) ABS warning light Move the control knob left or right to adjust the brightness. Parking brake & Brake fluid warning light INSTRUMENT CLUSTER SETTINGS The instrument cluster can be changed from analog to digital. To change cluster layout, select the following items in order. 1. Select User Settings 2. Select Other 3. Select Instrument Cluster Layout 4. Select Analog or Digital CLUSTER HELP MENU The cluster help menu provides additional details on user settings. To activate select the following items. TRIP COMPUTER 1. Select User Settings Select "Trip Computer" mode by pressing the MODE button . To change the trip mode as follows, press the MOVE button . FUEL ECONOMY ACCUMULATED INFO DRIVE INFO •Average Fuel Economy •Instant Fuel Economy •Tripmeter •Fuel Economy •Timer •Tripmeter •Fuel Economy •Timer 11 Digital speedometer 2. Select Driver Assistance 3. Press and hold “OK” button on steering wheel Smart Shift HYUNDAI SANTA FE 12 FEATURES AND CONTROLS MANUAL CLIMATE CONTROL 3 3 3 1. Fan Speed Control Knob 2. Temperature Control Knob 3. Mode Selection Buttons 4. Front Windshield Defroster Button 5. Rear Window Defroster Button 6. A/C (Air Conditioning) Button 7. Air Intake Control Button 3 1 2 4 5 DEFROSTING / DEFOGGING 6 7 7 AIR INTAKE CONTROL MODE SELECTION REAR WINDOW DEFROSTER Changes the direction of the air flow as following: Press to activate/deactivate the rear defroster. 1. Press the front windshield defroster button. 2. S et the temperature control to the warmest setting. 3. Set the fan speed to the medium setting. NOTE: To reduce the tendency of the glass to fog up and also to improve visibility, keep the surface of the windshield clean by wiping it occasionally with glass cleaner and a clean cloth. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle. 13 Face Level Recirculated air position MAX A/C MODE Bi-Level Floor Level Floor / Defrost Level Outside (fresh) air position HYUNDAI SANTA FE The MAX A/C automatically selects the A/C, recirculated air, and face level vents. This helps to cool the cabin down more quickly. Select normal A/C after initial cool down to resume fresh airflow and maintain efficiency. 14 FEATURES AND CONTROLS AUTOMATIC CLIMATE CONTROL 1 2 3 4 5 6 Driver’s Temperature Control Knob Front Windshield Defrost Button Rear Window Defrost Button Fan Speed Control Knob Air Intake Control Button (Recirculated air) Air Intake Control Button (Outside air) 9 8 2. Set the temperature control to the warmest setting. 3. Set the fan speed to the medium setting. 12 6 10 1 7 7 4 2 8 9 11 3 10 11 12 DEFOGGING / DEFROSTING SYSTEM OFF 1. Press the front windshield defroster button. 5 Pressing the OFF button will place the system to the OFF mode. • Climate control fan will turn off. •Outside (fresh) air position will be selected. • Vented air will be at last set temperature. NOTE: To reduce the tendency of the glass fogging and also to improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, select air intake control to the outside (fresh) air position whenever possible while operating the vehicle. AUTOMATIC HEATING / AIR CONDITIONING The modes, fan speeds, air intake and air conditioning will be controlled automatically by the temperature setting you select. It is recommended to use the AUTO function with 72°F temperature set point for optimum comfort and efficiency. Adjust the temperature as desired Passenger's Temperature Control Knob AUTO (Automatic Control) Button OFF Button Air Conditioning Button Mode Selection Button SYNC Button AIR INTAKE CONTROL Recirculated air position (LED on) Outside (fresh) air position (LED off) MODE SELECTION Changes the direction of the air flow as following: HEATED STEERING WHEEL BUTTON 15 HYUNDAI SANTA FE 16 MULTIMEDIA FEATURES AND CONTROLS BLUETOOTH PHONE PAIRING HOMELINK WIRELESS GARAGE CONTROL SYSTEM With Display Audio Flashing Flashing RADIO HOME MEDIA PHONE SEEK TRACK SETUP POWER ENTER PUSH TUNE FILE VOL 1. Press the PHONE button. 2. Search for car name on the Bluetooth list from your mobile phone and pair device. 3. Input the passkey. (Initial passkey is 0000) 4. Bluetooth becomes connected. Standard Programming To train most devices, follow these instructions: 1. Press and hold the two outside buttons on the Homelink® system until the LED starts to blink, release buttons. 2. Press and hold the desired Homelink® button and the transmit button on your rolling code transmitter at the same time until the Homelink® LED changes from a slow blink to a rapid blink. (Your Homelink® system is now programmed) With Navigation RADIO MEDIA SEEK TRACK POWER 1. Press the PHONE button in the head unit or button in the steering wheel remote controller. 2. Press to search for Bluetooth phones. 3. Pair your car after your mobile phone detects the Bluetooth device. 4. Enter the passkey or accept the authorization popup. (The default passkey is 0000.) 5. Connect Bluetooth. NOTE: Vehicle must be parked to complete the pairing process. MAP NAV SETUP ENTER PUSH VOL 3. Locate the learn code button on your garage door opener. (These are located under the light cover or on the rear panel depending on model) 4. Press the learn code button on the garage door opener, a red LED will start to blink. (You will have 30 seconds to complete programming) TUNE FILE 5. While the LED on the garage door opener is blinking, return to the vehicle and press the pre-programmed Homelink® button 4 times. (Or until the garage door operates). 17 HYUNDAI SANTA FE 18 MULTIMEDIA STEERING WHEEL AUDIO CONTROL 1 Raises or lowers the speaker volume. Press to Mute. 3 1 Making a call using voice recognition: VOLUME 2 SEEK / PRESET Changes the station. 2 3 MODE Changes the audio source. BLUETOOTH OPERATIONAL TIPS In the following situations you or the other party may have difficulty hearing each other: 1. Keep the Bluetooth volume low. High level volume may result in distortion and echo. 2. When driving on a rough road, high speeds and/or with the window open. 3. When the air conditioning vents are facing the microphone and/or when the air conditioning fan is at the max speed. Steering wheel bluetooth control 1 1 TALK 2 CALL Activates the voice recognition. Places and transfers calls. 2 3 3 END Ends calls or cancels functions. To Answer a Call: • Press the button on the steering wheel. To Reject a Call: • Press the button on the steering wheel. To Adjust Ring Volume: • Use the VOLUME buttons on the steering wheel. To Transfer a Call to the handset (private mode): • Press and hold the button on the steering wheel until the audio system transfers a call to the phone. To Finish a Call: • Press the button on the steering wheel. 19 HYUNDAI The menu tree identifies available voice recognition Bluetooth® functions. Calling by Name: 1. Press the button. 2. Say the following command: • “Call ”: Connects the call to John. • “Call : Connects the call to John’s Mobile, Home, or at Work phone number. Dialing by Number: 1. Press the button. 2. Say “Dial Number”. 3. Say the desired phone number. For the complete list of commands, please refer to your Owner’s Manual. VOICE RECOGNITION TIPS Your vehicle is equipped with a Voice Recognition technology which allows drivers to operate their phones without having to take their eyes off of the road to minimize distractions. Voice recognition performance may be affected if driving with windows and sunroof open; when the heating-cooling system is on; when passing in a tunnel or when driving on rugged and uneven roads. Quick reference on using voice commands: To start a voice command, press the available: button, the following commands are Command Function More Help Help Calls Dial Phone Provides guidance on commands that can be used anywhere in the system. Provides guidance on commands that can be used within the current mode. Calls saved in Contacts. Ex) Call “John” Call can be made by dialing the spoken numbers. Ex) Call “123” Provides guidance on Phone related commands. After saying this command, say “Call History”, “Contacts” to execute the corresponding functions. Displays the Contacts screen. After saying this command, say the name of a contact saved in the Contacts to automatically connect a call. Displays the Dial number screen. After saying this command, you can say the number which you want to call. Contacts (Call by Name) Dial Number SANTA FE 20 MULTIMEDIA BLUE LINK TELEMATICS SYSTEM Remote Start Remote Start • Blue Link You can download the Blue Link mobile app to your compatible smart phone from the following sites: • Navigation • SOS • iPhone — Apple App Store • Android — Google Play ® ® ® Press the button for access to the voice-response menu of services. You can say: Remote Start enables you to remotely start your vehicle from virtually anywhere. For navigation vehicles, you can also enable climate control remotely and turn on the rear-window defroster, ensuring a warm or cool car is ready to go when you are. - "Service Link" to schedule a service appointment. - "Roadside Assistance" for roadside services. - "Blue Link Account Assistance" for help with your Blue Link subscription. - Press the button for Destination Search by Voice. - Press the button for SOS Emergency Assistance. • To use this feature, you must have a Blue Link Personal Identification Number (PIN). To create or change your PIN, log on to www.MyHyundai.com. Remember: - Refer to your Blue Link User’s Manual for detailed information on system operation. • Remote Start with Climate Control will automatically shut off after 10 minutes or after selected engine timer runs out in navigation vehicles. - For immediate assistance with subscription services, please call 1-855-2BLUELINK (1-855-225-8354). • While this feature is active, the parking lights will blink until vehicle is turned off or when vehicle is in operation. NOTE: *Remote Start is only available for Push Button Start • T o continue operation of the vehicle, the proximity key must be inside the vehicle with the driver prior to pressing the brake and being able to move the gearshift from the P (Park) position. equipped vehicles with an Automatic Transmission or a Dual Clutch Transmission (DCT). 21 HYUNDAI SANTA FE 22 MULTIMEDIA RADIO MODE Preconditions: • Ignition is OFF • Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock) • Gearshift level is in the P (Park) position • Brake pedal is not depressed • Engine hood is securely closed • All the doors are closed and locked • The tailgate or trunk lid is closed • The security/panic system is not activated • The proximity key is not inside the vehicle • The battery power is not low • Vehicle is located in an open area • It has been less than 4 days since last vehicle ignition off • Vehicle located in area with good cell reception Remote Start will terminate: • After 10 minutes or after selected engine timer runs out in navigation vehicles • Brake is pressed without proximity key inside vehicle • Alarm is triggered without proximity key inside vehicle • Door/trunk is opened from inside the vehicle Notice: Laws in some communities may restrict the use of the features that remotely start the engine. For example, some laws may require a person using the remote start feature to have the vehicle in view when doing so or limit the length of time a vehicle engine may idle. Please check local and state regulations for any requirements and restrictions on remote starting of vehicles and engine idling time. WARNING! Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches, dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals unattended in a vehicle while using the remote start function. CAUTION! RADIO HOME MEDIA PHONE SEEK TRACK SETUP POWER ENTER PUSH TUNE FILE VOL Press POWER button to turn radio on. • TUNING/LISTENING TO CHANNELS 1. Press RADIO button . 2. Rotate TUNE knob to desired channel. NOTE : A clear view of the southern sky helps to ensure XM® radio reception. • SETTING PRESET MEMORY BUTTONS (FM/AM/XM® ) Press and hold any preset button (1-6) until audible beep is heard to store current channel. • ADJUSTING THE SOUND CONTROL 1. Press SETUP button and press the sound button on the display. 2. To adjust the Fader/Balance, select the position tab. Touch the on-screen arrows to adjust the desired setting for front, rear, left, or right balance. 3. To adjust the Bass/Midrange/Treble, select the tone tab. Touch the on-screen arrows to adjust the tonal sound settings to the desired level. If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice or snow accumulated on the windshield), please always turn the vehicle’s windshield wipers off when parking the vehicle. 23 HYUNDAI SANTA FE 24 MULTIMEDIA NAVIGATION WIRELESS CELLULAR PHONE CHARGING SYSTEM Basic features on the map screen 1 2 3 4 5 6 There is a wireless cellular phone charging system inside the front console. The system operates with all doors closed, and the ignition switch is in the ACC/ON position. 13 8 9 10 11 NOTE: 12 T h e w i re l e s s c e l l u l a r p h o n e charging system supports only the Qi-enabled cellular phones ( ). 7 1 2 3 4 5 6 7 Move to the Home Screen Change the map view mode Voice Guidance On/Off Zoom in the map S et the zoom level automatically according to the guidance Zoom out the map Q uick and easy selection of a destination and options 8 9 10 11 12 13 Touch to scroll the map Start Guidance Route Options Save frequently used address to address book Find a POI (Point of Interest) around the current position V iew the vehicle’s current position on the map screen NOTE: Do not place any metallic items such as coins, keys on the charger. Avoid putting credit cards, etc. on the charger as they might get damaged by the magnetic field. NOTE: Destination search screen 1 2 3 4 5 6 7 8 User selectable option. Please see section 3 from Owner's Manual for more details. 9 AUX, USB AND SMARTPHONE PORT Use the AUX or USB ports to connect an external audio device and listen to it through the audio system in your vehicle. Press [NAV] button in the navigation head unit, and finds a destination by using the [Destination] menu. 6 R 1 Address : Set destination by estaurants : Select the desired destination among the searched address search. 2 P restaurants. revious destinations : Select 7 E from previously inputted mergency : Select the desired destination among the searched addresses and POIs. 3 O emergency facilities. nline Search: Runs online 8 Address Book : Search the search. 4 POI categories : Select the destination with the address book. desired item in the sub9 Coordinates : You can find a categories. 5 G destination by entering the as stations : Select the desired coordinates of latitude and destinations among the longitude. searched gas stations. 25 HYUNDAI Use this USB port to access Android Auto or Apple CarPlay with your compatible phone. SANTA FE 26 MULTIMEDIA ANDROID AUTO ™ PHONE SETUP REQUIREMENTS: - USB cable - OS Android™ 5.0 or higher - Compatible Android Phone - Data and wireless plan for applicable features Turn on Bluetooth® on your phone and connect the micro USB cable to your phone and the USB port on the vehicle. BEFORE YOU BEGIN: - Android Auto features may operate differently than on your phone. - Message and data charges may apply when using Android Auto. - Android Auto relies on the performance of your phone. If you experience performance issues: - Close all apps and then restart them or - Disconnect and then reconnect your phone - Using the USB cable that was provided with your phone is recommended. - When Android Auto is active, your in-vehicle voice recognition system is disabled and you will be using talk to Google™ to make your requests. ANDROID AUTO SUPPORT Phone will prompt you to download the Android Auto app and update other needed apps (i.e. Google Maps™, Google Play Music™, Google Now™). NOTE: Vehicle must be parked. - Location mode setting should be set to High accuracy. - Car and phone setup should be completed in one sitting. If phone setup needs to be resumed, recommend to Force Stop the Android Auto app on the Phone then reopen the app and accept the Disclaimer notifications. CAR SETUP 1. Press the SETUP button on the radio. 2. Touch the “Phone Projection” icon on screen. 3. Select “On” for Android Auto. 4. Connect your Android phone to the vehicle USB port. Agree to the notification and disclaimers on your phone then the “Android Auto” icon will appear confirming the setup. For more detailed information on how to operate Android Auto, please refer to your navigation manual. For additional Android Auto support, please refer to the Android Auto Support Website https://support.google.com/androidauto/ https://support.google.com/androidauto/ 27 Android Auto, Google Play, Android, and other marks are trademarks of Google Inc. HYUNDAI SANTA FE 28 MULTIMEDIA APPLE CARPLAY ™ CAR SETUP REQUIREMENTS - Apple Lightning® cable - Latest iOS - iPhone® 5 or above - Data and wireless plan for applicable features BEFORE YOU BEGIN - Apple® CarPlay features may operate differently than on your phone. - Message and data charges may apply when using Apple CarPlay. - Apple CarPlay relies on the performance of your phone. If you experience performance issues: - Close all apps and then restart them or - Disconnect and then reconnect your phone - Using the Apple Lightning cable that was provided with your phone is recommended. - When Apple CarPlay is active, your voice recognition system is disabled and you will be using Siri® to make your requests. 1. Press the SETUP button. 2. Touch the “Phone Projection” icon on the screen. 3. Touch “iOS” on the Phone Projection Settings screen then touch “On” to enable Apple CarPlay. 4. Connect your Apple iPhone to the vehicle USB port then touch ‘OK’ when the pop-up message appears. The Apple CarPlay icon will now appear on the vehicle Home screen confirming the setup. Apple CarPlay, Apple, and other marks are trademarks of Apple Inc. PHONE SETUP On your phone, go to Settings > General > CarPlay to allow CarPlay access. On your phone, go to Settings > Siri and ensure Siri is turned ON. 29 HYUNDAI SANTA FE 30 MULTIMEDIA CarPlay Home Screen 4 PHONE Touch the PHONE 5 icon to access the Phone screen. Siri will automatically asks ‘Who you would like to call’ when the PHONE 5 icon is selected. 2 NOTE: Phone call sound quality is dependent on the wired connection. Using the Lightning cable that came with the phone is recommended. 5 6 7 8 13 3 1 1 2 3 4 5 6 12 11 10 HOME ICON WIRELESS CONNECTIVTY CELLULAR SIGNAL PHONE TIME PHONE APPLE MUSIC™ 9 7 8 9 10 11 12 PPLE MAPS A MESSAGES 3RD PARTY APPS SCREEN PAGE INDICATOR EXIT TO HYUNDAI CURRENT CARPLAY AUDIO PLAYING SIRI APPLE MUSIC Touch the APPLE MUSIC APPLE MAPS Touch the APPLE MAPS 6 7 icon to access the Apple Music screen. icon to access the Apple Map screen. MESSAGES Touch the MESSAGES 8 icon to access the Message screen. Siri will automatically asks ‘To hear unread messages or create a new one’ when the MESSAGE icon is selected. Apple CarPlay uses Siri to perform many actions like sending messages, placing calls, and looking up/setting POI/Destinations. A Siri session can be initiated on any screen by: 1. Touch and holding the HOME icon 1 on the CarPlay screen or 2. Press the steering wheel VOICE RECOGNITION 13 button. Note: Ensure Siri feature is set to ON in your phone (Go to Settings > General > Siri). 3. Say any of the following commands; •“Text ‘Call you later’” to send a text message. •“Read text messages” to read available text message. •“Call ” to make a phone call. •“Find ” to locate a POI/Destination. 3rd PARTY APPS Supported CarPlay apps that are downloaded on your phone will appear on the CarPlay screen. Touch the apps icons to access those supported apps. 31 SANTA FE HYUNDAI NOTE: A list of the supported CarPlay supported apps can be found at http://www.apple.com/ios/carplay/ Ensure phone has latest version of the 3rd Party Apps. 32 DRIVING LANE KEEPING ASSIST (LKA) BLIND-SPOT COLLISION-AVOIDANCE ASSIST (BCA) The Lane Keeping Assist System detects lane markers on the road, and assists the driver’s steering to help keep the vehicle between lanes. The Blind-Spot CollisionAvoidance Assist (BCA) system may apply braking power, when an approaching vehicle is detected within a certain distance next to or behind your vehicle. The instrument cluster will inform the driver of activation. Press the BlindSpot switch. The indicator will illuminate on the button. If vehicle speed exceeds 9mph the system will activate. Press the switch again to deactivate the system. • To turn LKAS on, press the LKAS switch. • To turn LKAS off, press the switch again. LKAS operates only when the vehicle speed is above 38 mph and when the LKAS indicator is green displayed in the instrument cluster. LKAS will not operate properly if the lane line is not clear, sharp Note: LKAS Settings can be bend in the road, or in heavy fog. adjusted in the User Settings Refer to the Owner's Manual for more page of the instrument cluster detailed information. under Driving Assist. Blind spot collision warning (BCW) Warning range is dependent on your vehicle speed. Example, if your vehicle speed is 9.3 mph greater than other vehicles, the warning is not active. FORWARD COLLISION-AVOIDANCE ASSIST (FCA) Blind spot collision avoidance (BCA) The Forward Collision-Avoidance Assist (FCA) system is designed to detect and monitor the vehicle ahead or detect a pedestrian in the roadway and warn the driver if a collision is imminent. When changing lanes, the system detects the front lane through the camera installed on the windshield and detects the side/rear areas through radar sensors. To operate the system, select the FCA (Forward Collision Avoidance Assist) sub menu in the LCD cluster display under User Settings. Please refer to your Owner’s Manual for further information. 33 HYUNDAI SANTA FE 34 DRIVING REAR CROSS-TRAFFIC COLLISION-AVOIDANCE ASSIST (RCCA) The RCCA system uses radar sensors to monitor approaching vehicles to the left and right while your vehicle is in reverse. If the risk of collision is detected while the RCCW is generated, brake is controlled. The instrument cluster will inform the driver of the brake control. If the rear view monitor system is in activation, a message will also appear on the audio or AVN screen. SAFE EXIT ASSIST (SEA) The Safe Exit Assist system helps prevent passengers from opening the door when a vehicle is approaching from the rear area. After the vehicle stops and an approaching vehicle from the rear area is detected, the rear door does not open from the inside handle. A “check surroundings then try again” warning message will appear on the cluster and a warning sound will go off. When an approaching vehicle from the rear is detected and the door is already opened, a “watch for traffic” warning message appears and a warning sound will go off. Activate/Deactivate Activate/Deactivate Select the following items on the instrument cluster in order: 1. Select User Settings 2. Select Driver Assistance 3. Select Blind Spot Safety 4. Select Rear Cross Traffic Safety Select the following items on the instrument cluster in order: 1. Select user settings mode in the cluster LCD display 2. Select Driver Assistance 3. Select Blind-Spot Safety 4. Select Safe Exit Assistance Note: If you press the child safety switch located on the driver door within 10 seconds after the warning message appears, the driver acknowledges the rear status and the child safety lock is canceled. 35 HYUNDAI SANTA FE 36 DRIVING IDLE STOP AND GO (ISG) REAR OCCUPANT ALERT (ROA) The ISG system will automatically shut off the engine when the vehicle is at a standstill (i.e. red stop light, stop sign, and traffic jam) to increase vehicle’s fuel economy. The auto stop indicator A will illuminate on the instrument cluster when activated. To restart the engine in auto stop mode, release the brake pedal and press on the accelerator. The auto stop indicator goes OFF on the instrument cluster once the engine is restarted. The Rear Occupant Alert system helps prevent exiting the vehicle with the rear passengers left in the vehicle. A 1st Alert When you open the front door after opening and closing the rear door and the engine is off, a “check rear seats” warning message appears. 2nd Alert (with Ultrasonic ROA) When any movement in the vehicle is detected after the driver’s door is closed and all doors are locked, the horn will activate for 25 seconds. To stop this alert, unlock the door with the remote key or smart key. Prerequisite for activation: -The driver’s seatbelt is fastened. -The driver’s door and the hood are closed. -The brake vacuum pressure is adequate. -The battery is sufficiently charged. -The outside temperature is between 14°F and 95°F (-10°C and 35°C). -The engine coolant temperature is not too low. -The system is not in the diagnostic mode. Note: After the first alert, press the OK A button on the steering wheel to deactivate the second alert. If the system continues to detect movement, the horn activates up to 8 times. The system detects movement in the vehicle for 24 hours after the doors are locked. Activate/Deactivate Note: The overhead sensor is located above the rear passenger seats. Select the following items on the instrument cluster in order: 1. Select User Settings on the cluster LCD display 2. Select Convenience 3. Select Rear Seat Alert To deactivate Press the ISG OFF B button, indicator illuminates. To activate Press the ISG OFF B button , indicator turns OFF. Note: If ISG is deactivated, it will be turned on again with key cycle. 37 HYUNDAI SANTA FE 38 DRIVING TIRE PRESSURE MONITORING SYSTEM (TPMS) DRIVE MODE The mode changes, as below, whenever the DRIVE MODE button is pressed. An indicator will illuminate on the instrument cluster when the vehicle is in sport mode or smart mode. When the vehicle is in comfort mode, it is not displayed on the instrument cluster. Low Tire Pressure Indicator / TPMS Malfunction Indicator SPORT COMFORT SMART COMFORT mode: In comfort mode, the engine and transmission control logic work together to provide regular daily driving performance with fuel efficiency. SPORT mode: LOW TIRE PRESSURE INDICATOR Sport mode manages the driving dynamics by automatically adjusting the steering effort, and the engine and transmission control logic for enhanced driving performance. When sport mode is activated, the engine RPM will be a little higher than normal. TPMS MALFUNCTION INDICATOR Illuminates if one or more of your tires is significantly under-inflated. SMART mode: Blinks for approximately one minute, then remains illuminated when there is a malfunction with the TPMS system. Have the system checked by an authorized Hyundai dealer. Smart mode selects the proper driving mode between comfort and sport by judging the driver’s driving habits. NOTE Note: Whenever the engine is restarted, the drive mode will revert back to the default comfort mode When the low tire pressure indicator is illuminated, inflate tire to proper tire pressure as soon as possible. Tire pressure may vary in colder temperatures, causing the low tire pressure indicator to illuminate. 39 SANTA FE HYUNDAI 40 DRIVING LEADING VEHICLE DEPARTURE ALERT (if equipped) CRUISE CONTROL/SMART CRUISE CONTROL 1 2 3 4 The Cruise Control system allows you to program the vehicle to maintain a constant speed without holding the accelerator pedal. 1 T o turn On/Off cruise control. 2 T oggle switch UP to Resume or Increase the cruise control speed. 3 T oggle switch DOWN to Set or Decrease the cruise control speed. 4 To Cancel the Cruise Control. Setting Vehicle Distance (Smart Cruise Control only) This system assist you in setting the distance from the vehicle ahead and will maintain the selected distance without you depressing the accelerator or the brake pedal. Press the button to set and maintain the vehicle-to-vehicle distance without pressing the accelerator or brake pedal. The vehicle-to-vehicle distance 1 will automatically activate when you set the cruise speed 2 . Each time the button is pressed, the vehicleto-vehicle distance changes as follows: Distance 4 Distance 3 2 1 Distance 1 The Leading Vehicle Departure Alert system alerts the driver of the departure of the vehicle in front when the vehicle is stopped and the Smart Cruise Control (SCC) is in activation. Select the following items on the instrument cluster in order: The system stops operation when the setting is deactivated. However, if the engine is turned off then on again, the system maintains in the previous state. VIN PREVIOUS VEHICLE ☐ REVIEW QUICK REFERENCE GUIDE ☐ BLUETOOTH -S how phone compatibility website: www.hyundaiusa.com/bluetooth - Pair customer's phone to the Bluetooth system (if equipped) - Make a test call using Bluetooth with the customer’s phone - Demonstrate Voice Recognition (VR) Distance 2 ☐ OPERATION OF THE NAVIGATION SYSTEM (if equipped) - page 25 ☐ REVIEW AND TEAR OFF VOICE COMMAND / QUICK TIP CARD ☐ OPERATION OF THE AUDIO SYSTEM - page 24 ☐ VEHICLE SETTINGS - Demonstrate vehicle settings in instrument cluster - Demonstrate navigation use, enter dealer address - Show radio presets UP to increase cruising speed. DOWN to decrease cruising speed. Note: Quick toggle up/down will change speed by 1 mph. Holding switch up/down will change speed by 10 mph. To Cancel Cruise Control Press the “CANCEL” button 4 or depress the brake pedal. Please refer to your Owner's Manual for more information. HYUNDAI DATE WALK THE CUSTOMER THROUGH EACH OF THE FOLLOWING KEY DELIVERY FEATURES Adjusting the vehicle speed 41 SALES CONSULTANT TEST TICKET HERE ☐ SET TIRE PRESSURE LF RF RR LR ☐ VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION, FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD AND BACK WINDOW ☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACE 1. Select User Settings on the cluster LCD display. 2. Select Driver Assistance 3. Select Driving Assist 4. Select “Leading vehicle departure alert 1. Press the “CRUISE” button 1 to turn on Cruise Control. The icon will illuminate in the instrument cluster. 2. Toggle “-SET” switch (3) DOWN to set cruising speed. 2 3 DEALERSHIP NAME BEFORE DELIVERY ☐ CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE To activate Setting Cruise Control 1. Toggle “+RES” switch 2. Toggle “-SET” switch HYUNDAI OWNER SANTA FE 42 BLUETOOTH® HANDS-FREE SANTA FE CUSTOMER DELIVERY CHECK LIST CONNECTING YOUR PHONE On the radio: 1. Push the SETUP button. 2. Select Bluetooth. 3. Select Bluetooth Connection . 4. Select Add New. In your phone’s Bluetooth settings: 5. Select the on your phone. 6. Enter the passkey from the radio or accept the authorization pop-up on your phone. SWITCHING BETWEEN PAIRED PHONES Using Voice Command: “Change Bluetooth device” On the radio: 1. Push the SETUP button. 2. Select Bluetooth. 3. Select Bluetooth Connection . 4. Select Connect next to the desired phone. For more information, visit HyundaiBluetooth.com

Hyundai - Santa FE - Owners Manual - 2020 - 2020

Get your hands on the complete Hyundai factory workshop software

Get notified when we add a new HyundaiOther Model Manual

We cover 60 Hyundai vehicles, were you looking for one of these?

Hyundai Sonata Workshop Manual (V6-3.3L (2006))

Hyundai Tucson Workshop Manual (V6-2.7L (2005))

Hyundai Genesis Sedan Workshop Manual (V6-3.8L (2009))

Hyundai - Auto - hyundai-i30-2018-104421

Hyundai - Auto - hyundai-elantra-2017-90005

Hyundai Tucson Awd Workshop Manual (L4-2.0L (2007))

Hyundai - Accent - Wiring Diagram - 2010 - 2010

Hyundai Azera Workshop Manual (V6-3.3L (2007))

Hyundai - Accent - Workshop Manual - 1997 - 1997

Hyundai - Auto - hyundai-i30-2012-79041

Hyundai - Auto - hyundai-i40-2016-93050

Hyundai - Auto - hyundai-ix35-2014-owner-s-manual-101133

Hyundai - Auto - hyundai-elantra-2013-101020

Hyundai Tiburon Workshop Manual (V6-2.7L (2004))

Hyundai Sonata Workshop Manual (V6-2.7L (2004))

Hyundai Genesis Coupe Workshop Manual (L4-2.0L Turbo (2010))

Hyundai - ix35 - Workshop Manual - 2010 - 2010

Hyundai - Santa Fe - Workshop Manual - (2009)

Hyundai Elantra Workshop Manual (L4-2.0L (2004))

Hyundai - Santa Fe - Workshop Manual - (2003)

1999-05--Hyundai--Sonata--4 Cylinders 2.4L FI DOHC--32577401

Hyundai Tucson Fwd Workshop Manual (L4-2.0L (2007))

Hyundai Tucson Awd Workshop Manual (L4-2.4L (2010))

Hyundai Elantra Sedan Workshop Manual (L4-2.0L (1999))

Hyundai Elantra Gt Hatchback Workshop Manual (L4-2.0L (2002))

Hyundai Accent Workshop Manual (L4-1.6L (2003))

Hyundai Accent L Hatch Back Workshop Manual (L4-1495cc 1.5L SOHC MFI (2000))

Hyundai - Santa Fe - Workshop Manual - (2010)

Hyundai - Auto - hyundai-i10-2016-manual-del-propietario-93002

Hyundai Genesis Sedan Workshop Manual (V8-4.6L (2011))

Hyundai - Auto - hyundai-i20-2016-manual-del-propietario-93003

Hyundai Veracruz Awd Workshop Manual (V6-3.8L (2007))

Hyundai Hyundai Atos Hyundai Atos Owners Manual

Hyundai - Elantra - Wiring Diagram - 1992 - 2004

Hyundai Sonata Gls Workshop Manual (V6-2.7L (2002))

Hyundai - i10 - Owners Manual - 2011 - 2011

1999-05--Hyundai--Tiburon--4 Cylinders F 2.0L MFI DOHC--32630001

Hyundai - Auto - hyundai-genesis-2012-100647

Hyundai Tucson Fwd Workshop Manual (L4-2.4L (2011))

2006-2008--Hyundai--Accent--4 Cylinders C 1.6L MFI DOHC--33227401

Hyundai - i20 - Workshop Manual - 2009 - 2009

2006-2008--Hyundai--Sonata--4 Cylinders C 2.4L FI DOHC--33097601

1999-05--Hyundai--Elantra--4 Cylinders D 2.0L MFI DOHC--32922501

Hyundai Elantra Workshop Manual (L4-1595cc 1.6L DOHC (1993))

Hyundai Accent Workshop Manual (L4-1.5L SOHC Alpha Engine (1995))

1999-05--Hyundai--Sonata--6 Cylinders 2.5L MFI DOHC--32630102

Hyundai - Auto - hyundai-elantra-2014-84339

Hyundai Elantra Gls Sedan Workshop Manual (L4-1.8L (1997))

2006-2008--Hyundai--Elantra--4 Cylinders D 2.0L MFI DOHC--33051501

Hyundai Sonata Gls Workshop Manual (V6-2.5L (2000))

Hyundai Accent Gl Workshop Manual (L4-1.6L (2001))

1999-05--Hyundai--Sonata--4 Cylinders 2.4L FI DOHC--32530601

1999-05--Hyundai--Accent--4 Cylinders 1.6L MFI DOHC--32629802

Hyundai - Auto - hyundai-genesis-2010-100649

Hyundai Sonata Workshop Manual (L4-2.0L (1992))

1999-05--Hyundai--Elantra--4 Cylinders D 2.0L MFI DOHC--32865601

Hyundai Elantra Gls Wagon Workshop Manual (L4-2.0L (2000))

Hyundai Hyundai i30 Hyundai i30 2008 Workshop Manual Body Repair

Hyundai Veracruz Fwd Workshop Manual (V6-3.8L (2009))

Hyundai - Accent - Workshop Manual - 2002 - 2002