Holden - UTE - Workshop Manual - 2012 - 2012

TECHNICAL BULLETIN (SP26) MY12 VE COMMODORE SIDE IMPACT SENSOR LOCATION CHANGE APRIL 2012 Body side assemblies for MY12 VE/WM vehicles have an internal difference compared to all production up to and including MY11. MY 11 and prior body side assemblies cannot be used to repair a MY12 vehicle, due to changes in the side impact sensor and the sheet metal in the lower B pillar area. When stock of the earlier body side assemblies is exhausted, repair of MY07, 08, 09, 10, 11 VE/WM vehicles will require the MY12 body side assembly plus an adaptor piece for mounting the side impact sensor. Part numbers are shown on the table below. The original part numbers can be used for MY07 to MY11 vehicles until stock is exhausted. Original body side part number for MY07- MY11 Ute: 92242467 Ute: 92242471 Wagon: 92198736 Wagon: 92198737 LWB: 92195896 LWB: 92195899 Sedan: 92214637 Sedan: 92214638 Replacement body side part number and adaptor part number 92420903 and 92260178 92420904 and 92260177 92420897 and 92260177 92420898 and 92260178 92420895 and 92260178 92420896 and 92260177 92420901 and 92260178 92420902 and 92260177 Note that GM-Holden does not authorise replacement of the outer quarter panel skin on VE utility by cutting the door aperture. (There is an authorised method for VE Sedan, VE Sportwagon and WM sedan.) Holden is currently working on a solution for VE utility to contain replacement costs. For further information please contact the IAG Research Centre on (02) 9292 6840 Acknowledgement: Information supplied by GM-Holden Insurance Australia Limited Disclaimer: The information contained herein is for general information purposes only. Users should be aware that (to the maximum permitted by law) we accept no responsibility for the accuracy or completeness of any material contained herein and exclude all liability to any person arising directly or indirectly from using the information or material. We recommend users confirm the accuracy and appropriateness of the information from another source if necessary, and to exercise their own skill and care with respect to its use. Copyright Copyright © 2007 Insurance Australia Limited ABN 11 000 016 722. All content included herein, such as text, documents, graphics, logos and images are the property of Insurance Australia Limited or its content suppliers and protected by Australian copyright laws. Third party copyright and trade marks appearing herein are reproduced with permission. No part of the content may be reproduced, transmitted, distributed, commercialised or re-used for any purpose whatsoever without written permission of Insurance Australia Limited (contact IAG Research Centre for more information). ABN 11 000 016 722 AFS Licence No. 227681 IAG Research Centre Unit One/ No. 2 Holker Street Newington NSW 2127 Australia T +61 (0)2 9292 6840 F +61 (0)2 9737 9860 E [email protected] W www.iagresearch.com.au