Ford - FR500C - Parts Catalogue - 2005 - 2006

PRO DRIFTING – FORD RACING “ALUMINATOR” FR500 GRAND-AM – FR500C FIA – FR500GT4 GRAND-AM – FR500GT FORD RACING MUSTANG CHALLENGE FOR THE MILLER CUP – FR500S SHELBY GT-H FORD RACING HIGH-PERFORMANCE DRIVING SCHOOL AT MILLER MOTORSPORTS PARK SHELBY GT500KR NHRA – JOHN FORCE RACING FUNNY CAR Ford Racing Performance Parts 2008 FIA – FR500GT3 5.00 USA $ TABLE OF CONTENTS FR500C 14-15 2005-06 FORD GT 23-25 SVT MUSTANG 30-37 2005-08 MUSTANG GT 38-49 2005-08 V6 MUSTANG 50-51 KIT CARS/STREET RODS 52-53 WHEELS 54-63 WHEEL TESTING STANDARDS.................................................. 54 MUSTANG WHEELS ........................................................... 55-60 TRUCK WHEELS ................................................................ 60-61 FORD GT WHEELS .................................................................. 61 FOCUS WHEELS ...................................................................... 62 LUG NUTS ........................................................................ 62-63 CENTER CAPS ........................................................................ 63 MODULAR ENGINE PARTS CRATE ENGINES 68-81 64-67, 82-97 CRATE ENGINE BUILDUP ................................................... 64-65 ENGINE INSTALLATION AND TUNING TIPS................................. 95 ENGINE QUICK REFERENCE CHART .......................................... 82 5.0L/5.8L CRATE ENGINES ................................................ 84-93 BIG BLOCK CRATE ENGINES .................................................... 93 MODULAR CRATE ENGINES ............................................... 35, 69 FOCUS MIDGET CRATE ENGINE ............................................... 19 ENGINE COMPONENTS 70-123 A.C. ELIMINATOR KITS .......................................................... 125 AIR CLEANERS...................................................................... 132 BREATHER CAPS .................................................................. 131 CAM COVERS ......................................................................... 79 CAMSHAFT GEARS AND CAM BEARINGS ....................... 102, 192 CAMSHAFTS AND LIFTERS .............................. 73, 110-112, 191 COLD AIR INTAKE........................................................ 31, 41, 50 COOLING SYSTEM PARTS ..................................................... 133 CRANKSHAFT DAMPERS AND SPACERS ........................ 124, 126 CRANKSHAFTS ....................................................................... 80 CYLINDER HEADS ...................................... 71-72, 103-106, 191 DISTRIBUTOR CAP AND ROTOR KITS ..................................... 144 DISTRIBUTOR GEARS .................................................... 146-147 ELECTRONIC FUEL INJECTION ............................... 107, 134-143 ENGINE BLOCK QUICK REFERENCE CHART ............................ 102 ENGINE BLOCKS ....................................................... 70, 98-102 ENGINE DRESS-UP COMPONENTS ................................. 127-132 ENGINE GASKETS ......................................................... 119-121 ENGINE LUBRICATION PARTS ........................................ 116-117 ENGINE OIL DIPSTICKS/TUBES............................................... 132 EXHAUST SYSTEMS ................................................ 25, 165-167 FASTENERS, PLUGS AND DOWELS ........................................ 118 FUEL INJECTORS .................................................................. 134 FUEL PUMPS ........................................................................ 140 HEADERS ................................................. 25, 81, 164, 192, 197 IGNITION AND ELECTRICAL ........................................... 144-145 INTAKE MANIFOLD QUICK REFERENCE CHART ....................... 109 INTAKE MANIFOLDS ................................................ 78, 107-109 OIL COOLER KITS ................................................................. 116 OIL FILTERS, MOUNTS AND ADAPTERS .................................. 116 OIL PANS........................................................................ 80, 117 OIL PICKUP TUBES .......................................................... 99, 117 OIL PUMPS ..................................................................... 79, 116 PERFORMANCE PACKS ......................... 24, 31-33, 41-43, 50-51 PLUG WIRE DIVIDERS AND LOOMS ........................................ 145 PULLEYS ...................................................................... 124-125 PUSH ROD GUIDE PLATES ..................................................... 115 ROLLER ROCKER ARMS ........................................................ 113 SHORT BLOCK ASSEMBLIES.................................................... 69 SPARK PLUG WIRES .............................................................. 145 STARTERS ............................................................................ 144 STUDS AND SHIMS ............................................................... 114 SUPERCHARGERS ............................ 30, 39-40, 75-77, 190, 194 THROTTLE BODIES.................................................. 78, 107, 192 TIMING CHAIN AND SPROCKET SETS ..................................... 112 TIMING CHAIN COVER ........................................................... 123 TIMING POINTERS ................................................................. 126 VALVE COVERS ............................................................. 127-130 VALVE GUIDES ..................................................................... 115 VALVE SPRING SEATS, RETAINERS AND KEEPERS................... 114 VALVE SPRINGS ...................................................... 73, 115, 191 VALVE TRAIN COMPONENTS.................................... 73, 114-115 VALVES................................................................... 73, 115, 191 TABLE OF CONTENTS BANNERS AND PENNANTS .....................................................180 DECALS.................................................................................180 TOOLS .......................................................................... 182-185 CHASSIS COMPONENTS MUSTANG COBRA PARTS 124-149 COBRA SEATS ...................................................................... 163 COBRA HOODS ..................................................................... 163 COBRA WHEELS ........................................................... 162-163 FOCUS PARTS 186-192 TRUCK PARTS 194-201 ENGINE BUILDING TIPS AND SPECS 210-219 FORD RACING DEALER LIST 220-223 PRICE LIST 214-223 ENGINE COMPONENTS CHASSIS COMPONENTS ACCESSORIES 162-163 CRATE ENGINES AUTO TRANS COMPONENTS ................................................. 176 AUTO TRANS DIPSTICKS/TUBES .................................... 132, 176 AUTO TRANS FLYWHEELS AND BOLTS ................................... 171 AUTO TRANS OIL PANS AND KITS.......................................... 176 AXLE COMPONENTS ..................................................... 148-154 AXLES .......................................................................... 152, 195 BELLHOUSINGS .................................................................... 173 BRAKE CALIPERS .................................................................. 157 BRAKE KITS AND COMPONENTS ........................... 155-158, 189 CARRIERS 9" GEAR............................................................... 148 CLUTCH LINKAGE ................................................................. 175 CLUTCH/TRANSMISSION INSTALLATION TIPS ......................... 173 CLUTCHES.................................................................... 174, 187 CONTROL ARMS ................................................................... 159 DIFFERENTIALS..................................................... 151, 187, 198 DRIVESHAFT ASSEMBLY ........................................................ 154 DRIVESHAFT LOOPS ............................................................. 154 DRUM BRAKE KITS AND COMPONENTS ................................. 158 FRICTION MODIFIER .............................................................. 151 LOWERING KITS.................................................................... 160 MANUAL TRANS FLYWHEELS AND BOLTS .............................. 172 REAR AXLE ASSEMBLIES ....................................................... 152 RING GEAR AND PINION SETS ............................................... 153 ROTORS ......................................................................... 25, 156 SHIFTERS AND SHIFT KNOBS .......................................... 24, 168 SPRING KITS................................................................. 161, 188 STRUT TOWER BRACES ........................................................ 161 THROW OUT BEARINGS AND PILOT BEARINGS....................... 175 TRANSMISSION COOLER KITS ......................................... 25, 176 TRANSMISSIONS .......................................................... 169-170 GAUGES AND GAUGE PODS .......................................... 178-179 PERFORMANCE WHEELS WATER PUMPS ............................................................. 122-123 WINDAGE TRAYS................................................................... 117 WING NUTS .......................................................................... 132 177, 180-185, 202-209 COBRA PARTS GENUINE FORD ACCESSORIES....................................... 202-203 APPAREL ...................................................................... 204-208 FENDER COVER .................................................................... 181 STEERING WHEEL ........................................................... 36, 181 PEDAL COVERS .................................................................... 177 LICENSE PLATES................................................................... 177 www.fordracingparts.com 1 MOST FORD RACING PERFORMANCE PARTS AND VEHICLES ARE SOLD WITH NO WARRANTY. FORD RACING PERFORMANCE PARTS AND VEHICLES ARE SOLD “AS IS”, “WITH ALL FAULTS”, “AS THEY STAND” AND WITHOUT ANY EXPRESS WARRANTY WHATSOEVER, UNLESS OTHERWISE EXPRESSLY DESIGNATED HEREIN. TO THE FULLEST EXTENT ALLOWED BY THE STATE AND FEDERAL LAW, FORD MOTOR COMPANY EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, EVEN IF A PARTICULAR PURPOSE IS MENTIONED HEREIN. FORD ALSO EXPRESSLY DISCLAIMS ALL LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGE OR LOSS OF PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF PURCHASE OR REPLACEMENT OF GOODS, OR CLAIMS OF CUSTOMERS OF THE PURCHASER THAT RESULT FROM THE USE OF ANY AND ALL PARTS OR VEHICLES CONTAINED IN THIS CATALOG. IN NO EVENT SHALL THE LIABILITY OF FORD MOTOR COMPANY, WHETHER IN TORT, CONTRACT OR OTHERWISE, EXCEED THE COST OF THE PART OR VEHICLE. HOWEVER, YOU MAY HAVE LEGAL RIGHTS WHICH VARY FROM STATE TO STATE. SHOULD ANY PARTS OR VEHICLES CONTAINED WITHIN THIS CATALOG PROVE DEFECTIVE FOLLOWING THEIR PURCHASE, THE BUYER AND NOT THE MANUFACTURER, DISTRIBUTOR OR RETAILER, SHALL ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING AND/OR REPAIR. THE ENTIRE RISK AS TO THE PERFORMANCE OF SUCH PARTS OR VEHICLES IS WITH THE BUYER. NO VEHICLE IN THIS CATALOG OR OFFERING IS STREET LEGAL OR CERTIFIED UNDER FEDERAL MOTOR VEHICLE SAFETY STANDARDS AND REGULATIONS UNLESS EXPRESSLY STATED TO THE CONTRARY HEREIN. VEHICLES THAT ARE NEITHER STREET LEGAL NOR CERTIFIED FEDERAL MOTOR VEHICLE SAFETY STANDARDS AND REGULATIONS ARE NEITHER INTENDED NOR CERTIFIED FOR USE ON PUBLIC ROADS. SUCH RACE PARTS ARE NOT DESIGNED OR TESTED FOR CRASHWORTHINESS OR TO MEET THE SAFETY NEEDS OF THE MOTORING PUBLIC. INSTEAD, THESE PARTS ARE DESIGNED AND INTENDED FOR RACE VEHICLES ON RACE TRACKS WITH ENGINEERS SUPERVISING THE INSTALLATION AND USE OF THE RACE PARTS TO ENSURE THAT THE SAFETY NEEDS OF THE RACE DRIVER ARE MET. THE RACING PARTS COULD CONCEIVABLY BE COMBINED IN AN INFINITE COMBINATION, AND THE USE OF SOME PARTS ON SOME VEHICLES COULD ADVERSELY AFFECT THE PERFORMANCE OF THE VEHICLE OR OTHER RACE PARTS. TO THE EXTENT THAT A PART CONTAINED WITHIN THIS CATALOG COMES WITH A WARRANTY FROM THE ORIGINAL MANUFACTURER, NOT FORD RACING PERFORMANCE PARTS OR FORD MOTOR COMPANY, THE BUYER SHOULD CONTACT THE ORIGINAL MANUFACTURER FOR ANY AND ALL WARRANTY REPAIR OR REPLACEMENT. TO DETERMINE WHICH PARTS COME WITH A WARRANTY FROM THE ORIGINAL MANUFACTURER, NOT FORD RACING PERFORMANCE PARTS, PLEASE CONTACT THE FORD RACING TECHLINE AT (800) FORD788 OR: FORD RACING PERFORMANCE PARTS P.O. BOX 51394 LIVONIA, MI 48151 2 Techline (800) FORD788 Ford Racing Performance Parts is proud of the quality built into each and every product we sell. Automotive enthusiasts know that it’s one thing for a manufacturer to make claims about quality, but quite another to back them up. FRPP is pleased to announce our Performance Crate Engines now carry a 12-month/12,000-mile limited warranty. It’s your assurance that when you purchase a FRPP crate engine, you’re buying Ford quality, backed by the Blue Oval. It’s performance you can trust. FORD RACING PERFORMANCE PARTS PERFORMANCE ENGINE LIMITED WARRANTY Ford Racing Performance Parts warrants to the original retail purchaser for 12 months or 12,000 miles, whichever occurs first, that it will repair or replace, at its option, using new or remanufactured parts, Ford Racing Performance Parts engine covered part that, after inspection, is found to have failed due to a defect in factory supplied material or workmanship. Covered parts include the engine block and cylinder heads, all internally lubricated parts of the engine, including pistons, piston rings, piston pins, crankshaft and main bearings, connecting rods and rod bearings, camshaft and camshaft bearings, timing chain, timing chain gears, intake and exhaust valves, valve springs, oil pump, push rods, rocker arms, valve lash adjusters, hydraulic or mechanical lifters, and valve stem seals, to the extent that the original engine contains the referenced warranted part. Parts that require normal manufacturers recommended replacement intervals are not covered under this warranty. To the extent allowed by law, loss of time, inconvenience, loss of the use of the vehicle, commercial loss, and incidental and consequential damages are not covered. There is no other express or implied warranty on these Ford Racing Performance Parts Engines including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. This warranty does not cover: • Parts which are replaced as part of normal maintenance. • Installation or removal costs. • Damage due to improper installation, negligence, alteration, or accident, including use related to racing or competition, marine or motorcycle applications, or for other non-vehicle usage. • Engines where the vehicle odometer has been disconnected or the mileage has been altered. • Damage caused by lack of proper maintenance, failure to follow maintenance schedule intervals, or failure to use or maintain proper type and levels of fluids, fuel, oil and lubricants. Proof of proper maintenance is the owner’s responsibility. Keep all receipts and be prepared to make them available if questions arise about maintenance. • Towing, shipping, rental vehicles, loss of time, inconvenience, loss of use, or other economic loss. • Ford Racing Performance Parts engines installed in vehicles registered and/or normally operated outside the United States and Canada. To obtain warranty repair or replacement, please contact Ford Racing Performance Parts at (800) FORD788 or: Ford Racing Performance Parts P.O. Box 51394 Livonia, MI 48151 www.fordracingparts.com 3 FORD RACING LIMITED WARRANTY STATEMENT Ford Motor Company, The American Road, Dearborn, MI 48025, provides a Limited Warranty on select Ford Racing performance parts when installed by a Ford, Lincoln or Mercury Dealer. This warranty replaces the existing manufacturer’s warranty. This warranty is valid for the original retail purchaser of the vehicle and is transferable to subsequent owners. This Limited Warranty is valid only when proof of purchase is registered by the installing dealer by contacting the Ford Racing Call Center at 1(800) 367-3788. WARNING NOTICE: Ford Racing Parts are not Genuine Ford Parts. All Ford Racing Parts are aftermarket parts. Therefore, they may not be used in any application that requires the use of Genuine Ford Parts. The use of Ford Racing parts and components is likely to increase horsepower which may cause damage to the vehicle driveline and adversely affect other performance characteristics. Such damage is the sole responsibility of the consumer and is not covered by this Limited Warranty. Consumers are solely and completely responsible for evaluating their vehicle to ensure that the vehicle, and each part of that vehicle, is appropriate for this Ford Racing part or component. It is the consumer’s sole responsibility to have the performance enhancement parts properly installed on their vehicle along with any modifications that are necessary for the proper performance of the vehicle. Vehicle damage caused by a consumer’s failure to modify the vehicle properly for use of one or more Ford Racing parts and components is not covered by this Limited Warranty and is the sole responsibility of the consumer. This Limited Warranty and/or the New Vehicle Limited Warranty on your vehicle may be voided, either in whole or in part, where the vehicle has been damaged due to a consumer’s failure to modify the vehicle properly as necessary for use of Ford Racing parts and components. Performance Packs (FR1 Only), FR 400 hp SuperPack and FR SuperPack 600 - Note: Customers are required to use 91 or higher octane fuels at all times. Any failures associated with the nonuse of premium 91 Octane fuel will be ineligible for warranty repair. Retail Customers: To obtain warranty service, please return your vehicle to any Ford, Lincoln or Mercury Dealership. Please have your original dated receipt for date and installation verification. 4 Techline (800) FORD788 Warranty Coverages for Select Ford Racing Parts: Performance Packs - (M-2005-FR1, M-5251-R, M-2005-FR1A, M-2006-FR1, M-2007-FR1V6, M-2007-FR1SVT, M-7210-T1, M-7210-V, M-7210-B, M-9603-GT05, M-9603-GT05A, M-9603GT06, M-9603-V605, M-9603-SVT07, and M-2005-FR3, M-2007-FR3V6, M-2007-FR3SVT, M5230-V6) found to be defective in factory-supplied material or workmanship for 3 years/36,000 miles (whichever comes first) when installed on a new vehicle at the time of vehicle sale or 12 months/12,000 miles (whichever occurs first) when installed after the date of vehicle sale but prior to the expiration of the 3 years/36,000 mile coverage (whichever occurs first) under the New Vehicle Limited Warranty. Performance Packs (FR1 Only). Note: Customers who purchase FR1 kits are required to use 91 or higher octane fuels at all times. Any failures associated with the non-use of premium 91 Octane fuel will be ineligible for warranty repair. Performance Packs (FR3) Note: The FR3 performance handling application is designed for “Track Day” limit ride and handling. The FR3 Handling Pack requires the use of original equipment size wheels only. Such performance standards suggest vehicle ride will be more indicative of race performance vehicles. Vehicle conditions including, but not limited to, squeaks, rattles and harsh ride are not subject to warrantable repair. Warranty Start Date - This limited warranty begins upon dealer installation and registration of the Ford Racing Performance Pack(s) with Ford Racing and ends at either 3 years/36,000 miles (whichever occurs first) when installed on a new vehicle at the time of vehicle sale or 12 months/12,000 miles (whichever occurs first) for all installations occurring after the date of vehicle sale but prior to the expiration of the 3 years/36,000 mile coverage (whichever occurs first) under the New Vehicle Limited Warranty. www.fordracingparts.com 5 Warranty Coverages for Select Ford Racing Parts: Superchargers - FR 400 hp SuperPack & FR SuperPack 600 - M-6066-M463V, M-6066M463V7, M-6066-M463P, M-6066-M463P7, M-6066-SGT. • The FR 400 hp Super Pack is warranted when Ford dealer installed on Mustang GT 4.6L engines. * (See Foot Note #1 below) • The FR SuperPack 600 is warranted when installed on Shelby GT500s. * (See Foot Note #1 below) * Foot Note #1: The FR 400 hp SuperPack and FR SuperPack 600 Superchargers are warranted for 12 months/12,000 miles from the time of installation when installed by a Ford, Lincoln or Mercury Dealer or Shelby Automotive, Inc. prior to the vehicle reaching either 36 months or 36,000 miles (whichever occurs first) from the vehicle warranty start date and found to be defective in Factory-supplied material or workmanship. This warranty replaces the existing manufacturer’s warranty for engine, driveline and suspension parts with a 12 month or 12,000 miles warranty. Ford Racing total liability per qualified vehicle under this warranty is $8,000 (Aggregate). Each covered component has its own aggregate value which when combined equals $8,000 in total parts repairs. Under this warranty policy, Ford Racing retains the right to replace any failed components with remanufactured parts for the life of the policy. The following warranty coverage by component is outlined below: Engine Assembly Coverage • Total liability for failed engine parts will be $5,000.00 Transmission Assembly Coverage • Total liability for failed transmission parts will be $1,500.00 Rear Axle Assemblies Coverage • Total liability for failed rear axle parts will be $1,500.00 Warranty Start Date - This Limited Warranty begins on the date of dealer installation in a Mustang GT equipped with a 4.6L engine and registration of the FR 400 hp Super Pack with Ford Racing remains in effect for 12 months/12,000 miles from the time of installation for all FR 400 hp Super Packs installed on Mustang GT equipped with a 4.6L engine provided installation occurs during the period of 36 months or 36,000 miles. 6 Techline (800) FORD788 Limitations to Warranty The following limitations apply to the products covered by this Limited Warranty: • The purchase invoice(s) may be required for submission of warranty claims. • This warranty does not cover vehicles that are used in off-road racing activities. • Where a warranted Ford Racing part is replaced under this Limited Warranty, the replacement Ford Racing part is warranted only for the time remaining in the original Limited Warranty. • Should Ford Racing modify any currently released parts which apply to this warranty program, Ford Racing is not obligated to update any previously manufactured parts. • Ford Racing’s warranty program does not cover parts with: o Damage or corrosion due to accidents, misuse or alterations. Damage or surface corrosion from the environment such as acid rain, airborne fallout (chemicals, tree sap), stones, salt road hazards, wind storm, lightning, floods and other natural disasters. o Normal wear, tear or deterioration such as discoloration, fading or blurring. o Replacement parts, or accessories installed on a Ford vehicle in which the odometer has been altered or on which the actual mileage cannot be readily determined. o Replacement parts or accessories used in applications for which they are not designed. o Non-Ford Racing parts or Ford Genuine replacement parts or accessories which Ford/Lincoln/ Mercury Dealers may sell or install on your Ford vehicle. o Misuse of a vehicle, such as driving over curbs, overloading, racing or using the vehicle as a stationary power source. NOTES: Federal and many state laws prohibit the removal, modification or rendering inoperative of any part that effects emissions or safety on motor vehicles used on public streets or highways. Ford Racing customers are responsible for complying with applicable state and local environmental regulations. In the case of vehicles which are licensed in California, it is the responsibility of the customer to determine if their own modified vehicle meets California laws for operations over public highways. • Questions or concerns relating to this warranty policy may be answered by calling the Ford Racing Warranty Call Center (800) 367-3788. THIS LIMITED WARRANTY DOES NOT COVER PARTS REPLACED OR LABOR CHARGES INCURRED AS PART OF NORMAL VEHICLE MAINTENANCE. THIS LIMITED WARRANTY DOES NOT COVER ENGINE DAMAGE ASSOCIATED WITH CUSTOMERS USING LESS THAN 91 OCTANE FUELS. TO THE EXTENT ALLOWED BY LAW, LOSS OF TIME, INCONVENIENCE, LOSS OF THE USE OF THE VEHICLE, COMMERCIAL LOSS AND INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE NOT COVERED. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY APPLICABLE TO THIS PART. FORD RACING AND FORD MOTOR COMPANY ARE NOT RESPONSIBLE FOR ANY TIME FOR WHICH YOU MAY LOSE THE USE OF YOUR VEHICLE, ANY INCONVENIENCE YOU MIGHT BE CAUSED, THE LOSS OF YOUR TRANSPORTION OR ANY PART THEREOF OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES YOU MAY HAVE. YOU MAY HAVE SOME IMPLIED WARRANTIES UNDER STATE LAW, FOR EXAMPLE, THE IMPLIED WARRANTY OF MERCHANTABILITY OR THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. www.fordracingparts.com 7 PERFORMANCE PARTS DESIGNATIONS As one of the leading manufacturers of performance parts, Ford Motor Company recognizes a special responsibility regarding environmental concerns. Ford Racing Performance Parts is committed to a program of developing performance parts that allow motorsport enthusiasts to modify their vehicles and meet emission requirements. Using guidelines established by the state of California for aftermarket parts used in vehicles driven on public highways, Ford engineers have developed a system for identifying parts that are acceptable for use on emission controlled motor vehicles and those intended for competition purposes only. This catalog lists more than 1,000 Ford Racing parts. For emission purposes, these parts are classified into three groups. Asterisks are used after the part number to identify the category to which the part belongs. GROUP 1— PARTS WITH NO ASTERISK GROUP 2— • Indicates that the part does not affect emissions—and is Street Legal. • For marketing purposes, some Street Legal parts also are identified with a 50-States Street Legal logo. • Typical parts include gauges, valve push rods, body and chassis components, and engine dress-up items. • Indicates that for emission considerations, the part is NOT Street Legal. The following footnote appears at the bottom of catalog pages describing these parts: *Not legal for sale or use on pollution-controlled motor vehicles. • Part numbers with a single asterisk typically include off-road performance parts and parts that may affect original equipment emission function, such as cylinder heads, engine blocks and camshafts. STREET LEGAL BY EXECUTIVE ORDER • This special group of add-on or modified group of parts are Street Legal by Executive Order from the State of California, because Ford Racing has demonstrated through emission testing that they do not adversely affect vehicle emissions when used on emission controlled vehicles. • Ford Racing cylinder heads for the 4.6L Mustang that are street legal under E.O. #D-308-6, are described on page 71. PARTS WITH 1 ASTERISK (*) NOTE—CALIFORNIA Parts marked in this catalog with an asterisk and appropriately marked on their packaging may legally be used in California only on a racing vehicle which will never be operated on public roads. FUTURE DEVELOPMENTS Ford Racing is continuing the process of developing, analyzing and testing engine and powertrain parts which can be used on pollution-controlled vehicles. Many, of course, are all-out performance parts and have no application for cars driven on public highways. Ford’s vision is to provide products meeting all of our various customers’ needs while remaining environmentally responsible. WARNING: This catalog lists primarily special performance parts and is intended only as a supplement to the published service manuals and parts catalogs of Ford Motor Company. Buyers of performance parts are warned that many of these parts are for off-highway use only and that the following provisions apply: OFF-HIGHWAY OR RACING USE Because U.S., Canadian, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, Ford Motor Company recommends that vehicles equipped with parts designated “for off-highway use” not be operated on public roads, and offers such parts only for track or off-highway competitive or performance use. Such parts have a special “warning” label (see next column). Techline (800) FORD788 • Indicates that the part is Street Legal as a Direct Replacement Part. • Part numbers with two asterisks can improve performance and/or appearance—while still providing original equipment emission function. • The following footnote appears at the bottom of pages describing these parts: **Direct replacement part. For more information on this program, call the Ford Racing Techline at (800) FORD788. IMPORTANT NOTICE 8 GROUP 3— PARTS WITH 2 ASTERISKS (**) This part has been designed and is intended for off-highway application only. Installation on a vehicle intended for use on public roads may violate U.S., Canadian, state or provincial laws and regulations including those relating to emission requirements and motor vehicle safety standards. (NOTE: In California this part may legally be used only on a racing vehicle which will never be operated on public roads.) In addition, installation of this part may adversely affect the warranty coverage on your vehicle. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. SHELBY AND FORD RACING – A FORD PERFORMANCE POWERHOUSE! Shelby and Ford Racing are two of the most recognized performance names in the business. Individually, these brands command attention; working together, they are an undisputed Ford performance powerhouse. With the launch of the stunning new Mustang, Shelby Automobiles, Hertz and Ford decided to rekindle a little of their own ’60s magic by working together to produce the 2006 Shelby GT-H rental car. With its recognizable Hertz black/gold livery, bold Shelby performance heritage, and functional upgrades from Ford Racing, the car was an instant hit. The Shelby GT-H definitely looked the part, and its Ford Racing components – the Power Upgrade Package, Handling Pack and X-pipe – delivered on the looks. The reaction to the GT-H was so positive that Ford, led by Robert Parker (Car Marketing Manager), and Amy Boylan (President, Shelby Automobiles) and her Shelby team quickly decided to produce a version for the Ford dealer’s showroom, available with both automatic and manual transmissions. This new Shelby model, modified by Shelby in Las Vegas, hit the market as the Shelby GT. To no one’s surprise, the Shelby GT followed the GT-H formula: enhance the driving experience through more power and improved vehicle dynamics delivered by Ford Racing parts. All with the magic of Shelby. The Shelby GT added the Ford Racing short-throw shifter for manual transmission cars along with all the content found on the GT-H – and then topped it off with a pair of “Powered by Ford” fender badges so there’s no doubt as to its heritage! Both Shelby cars have been praised widely by discerning enthusiasts and the media alike. Each model has continued for another year – adding convertible versions the second time around. And there’s more to come. The new Shelby GT500KR, available in the spring of 2008, is led by SVT engineering and features the Power Upgrade Package and Handling Pack from Ford Racing with stunning Shelby performance KR heritage. Ford Racing and Shelby will follow the KR with the Shelby GT500 Super Snake upgrade package available only from Shelby, featuring the 605 horsepower Ford Racing Super Pack and other unique Shelby performance offerings. And remember, Ford Racing components are found on these special Shelby vehicles for the same reasons you should choose Ford Racing -- factory engineering, on-track development, warranty coverage and a proven track record. After all, as Carroll Shelby himself has said, “There’s something special about working with the factory.” For complete details on limited-warranty coverage, go to www.fordracingparts.com/warranty or contact the Ford Racing Information Center at 800-367-3788. www.fordracingparts.com 9 FORD’S “FACTORY PERFORMANCE ROOTS” Showcasing a vehicle’s performance to prove its competitive superiority is rooted firmly in Ford history. Our company was founded with capital that Henry Ford himself attracted on October 10, 1901, when he won a match race against Alexander Winton, the most accomplished automobile racer of the era. By proving to those first investors that Ford’s horseless carriage was better than the competition, it’s no stretch to say that The Ford Motor Company was built on racing. Thanks to the introduction of our famed Flathead V-8 in 1932, we leapfrogged the competition in affordable performance, and created an entire generation of cars that would provide a canvas for future performance enthusiasts. With the advent of Deuce Coupes, hot rods and drag racing in the 1950s and well into the ’60s, we supported a small band of hard-core performance buffs as only a major manufacturer could – by building such factory-backed “hot rods” as the 1963½ Lightweight Galaxies and the 1964 Fairlane Thunderbolts – true race cars available right off the Ford dealer’s showroom floor. Of course performance cars get attention unlike any family cars can, so the image-building power of niche cars fueled the “win on Sunday, sell on Monday” justification for factory-sponsored professional racing. Ford revved up a “Total Performance” racing program – an allout assault on the world of motorsports – that saw factory-supported racers competing in every form of professional racing, from Drag Racing to Formula 1, Indy Car to Stock Car and Road Racing to OffRoad Racing. It’s certainly a credit to the American entrepreneurial spirit that hard-core racers took the lead in the development and prove-out of some go-fast technology. It’s no wonder that those who discovered racing success often found themselves at the heart of the high-performance aftermarket. Perhaps no greater example of this was Carroll Shelby, whose ingenuity and determination (along with support from Ford) in the racing world built a huge grassroots following – first for the reputation of the Shelby Cobra roadster, and later for Ford Motor Company with the GT40 program and its stunning victory over Ferrari at LeMans. Now, there’s no question that a race car outperforming the competition at a racetrack goes a long way to bolster the reputation of a company’s engineering ability. But for that message to really hit home, automakers soon found that street-legal performance models were the ones that differentiated their brand where it counts most – on the road. 10 Techline (800) FORD788 By 1965, Lee Iacocca’s hot new Mustang was a runaway sales success for Ford. But Iacocca knew early on that it just didn’t have enough oats to be considered a real “muscle car” – especially when big-block muscle cars were already prowling Woodward Avenue for bragging rights. Iacocca sought a way to give the nameplate some immediate “street cred.” Shelby had that credibility in the racing arena, so Iacocca not only wanted him to help get Mustangs introduced to road racing, he also struck a deal to have Shelby enhance the performance and looks of a limited number of Mustangs at his own facility. It not only helped foster growth in Mustang’s brand image, but also gave birth to an instant collectible. As any Mustang fan knows, Shelby Mustangs are among the most desirable and valuable Fords ever produced. While the Shelby models are among the most well-known Ford performance cars, many special performance models were built and sold in response to various sanctioning bodies’ competition requirements, underscoring another industry truth that “Racing Improves the Breed.” Through high-performance street cars like the Mustang Mach 1, the Boss 429 and the incomparable Boss 302, our engineers applied what they learned on the track to street cars. So as the Total Performance campaign soon began to fill Ford’s trophy cases, the real winners were the customers – with Mustang leading the way. Like it did since the very beginning, Mustang again became Ford’s main road-racing entry in the Sports Car Club of America (SCCA) – this time in the Trans-Am series. Behind drivers Parnelli Jones and George Follmer, the Mustang’s Trans-Am series championship in 1970 helped further solidify its reputation as America’s muscle car. In 1981 we returned to the track after a decade dealing with the fuel crisis of the 70s, and our racing efforts were managed by Special Vehicles Operations (SVO), a small group patterned after a military skunkworks operation. SVO was given three assignments: develop and manage motorsport programs, from NASCAR to Formula 1; rebuild and expand the Ford highperformance parts business; and develop limitededition performance street cars. Based on Mustang’s road racing heritage, SVO gave top priority to racing Mustangs in the International Motor Sports Association (IMSA) GTO and Sports Car Club of America (SCCA) Trans-Am series. Spearheaded by Roush Racing’s 119 road racing victories and 10 consecutive 24 Hours of Daytona sedan class championships, Ford raced through the ’80s with Mustang (and Mercury Capri) road racers racking up a total of 12 IMSA GTO and SCCA Trans-Am Championships. At the same time, on-the-street enthusiasts were again treated to exciting cars like the V-8 powered Mustang GT. The refined Mustang SVO, with its economical yet powerful turbocharged four-cylinder engine and balanced handling, mimicked the performance attributes of the Mustang GTP and Mustang Probe race cars and further energized the Mustang as a world-class sports car. www.fordracingparts.com 11 In the early ’90s, as racing continued to grow, SVO’s duties were refocused on racing and performance parts, and Ford’s performance street-car development was handed to a new Special Vehicle Team. Guided by the goals to deliver “performance, substance, exclusivity and value,” SVT assumed the responsibility for all factory-built performance Fords, setting the standard for the high-performance enthusiast vehicles that carried the flag for Dearborn. From 1993 to 2004, Ford SVT pumped out legendary vehicles such as the Mustang Cobra, Cobra R, SVT F-150 Lightning pickup, SVT Contour sport sedan and the SVT Focus sport compact. Over that period, more than 150,000 SVT vehicles were sold to Ford enthusiasts worldwide, making SVT the longest-running, best-selling, most successful niche performance vehicle operation in history. Today, we at Ford Racing combine the efforts of SVO and SVT in developing Ford performance parts required for cars for racing and street enthusiasts, and at times the cars themselves. The new 2005 Mustang opened a new chapter in the car’s ever-evolving performance story: it was designed from the ground up with performance derivatives in mind, with a chassis that provides an exceptionally rigid, well-engineered starting point for our Ford Racing engineers. While sports car buffs were insisting that an Independent Rear Suspension (IRS) is the hot ticket, the Mustang was validating its solid axle rear suspension design out on the street and track. The Ford Racing Mustang FR500C is a perfect example of a solid-axle rear suspension car going toe to toe with IRS-equipped cars from Porsche and BMW – and winning! The FR500C was purpose-built from the base 2005 Mustang body structure and suspension geometry. Competing against the best manufacturers from Germany and Japan, a Mustang FR500C won its first race in the season opener at Daytona International Speedway in February 2005. Led by a partnership with Multimatic under Larry Holt, the #05 FR500C driven by Scott Maxwell and David Empringham went on to dominate the 2005 Grand-Am Cup season and clinched the drivers’, team and manufacturers’ championships. After winning in America, we set our sights once again on winning in Europe. In 2007, Mustang entered the FIA GT series race at Silverstone with the FR500C in GT4 and the FR500GT in GT3. American Gunnar Jeanette delivered Ford its first win, the FIA GT4 European Cup Championship in May, and Eric De Doncker took an early lead in the GT4 points standings. 12 Techline (800) FORD788 The same engineers who helped develop the FR500C were assigned to producing Ford Racing Performance packs for today’s Mustang. Our team spent hundreds of hours on the track and street testing gears, springs, shocks and sway bar combinations. The yellow FR500 development car has made hundreds of laps and cruised thousands of miles testing the durability of the parts. That car, as well as the other cars in our development fleet, has performed flawlessly. Through those efforts, factory-engineered performance and handling packages are now available for Mustang V-6, GT and Shelby GT500. From the moment it stole America’s heart in 1964, the Ford Mustang has been racing and winning. And just like those road-racing warriors of the 1960s, 1970s and 1980s, today’s Grand-Am winning racers use the same performance parts that are available for your pony car, designed and developed by the same team of dedicated engineers who gave birth to your Mustang. Every race-proven part is packed with potential, many come with a limited Ford Racing warranty, and all are waiting to be installed by your local Ford dealer. Today, our Ford Racing engineers still develop and build race-winning cars, just like Henry Ford did more than 100 years ago. The Mustang FR500C and FR500GT are tearing up racetracks worldwide and influencing the development of a whole new generation of high-performance Mustangs. As 100 years of great products can attest, when you have a passion for performance Fords, real value isn’t measured in dollars, but rather in how much fun these vehicles are to drive and own. On behalf of our entire team at Ford Racing and all personnel at Ford who touch Mustang and Performance, we want to thank you for your continued support of Ford Performance. Jamie Allison Ford Racing Performance Group Dan Davis Director, Ford Racing Technology www.fordracingparts.com 13 FR500C In a testament to Ford Racing engineering and durability, the FR500C has stormed the Grand American Road Racing GS Class. Right out of the box, 2005 proved to be a remarkable season for the FR500Cs as these factory-engineered race cars won 5 races on their way to garnering the “triple crown” -- the drivers’, manufacturers’ and team championships! As the saying goes, “nothing breeds success like success,” and 2007 is further evidence of that. Based on their proven track records of 2005 and 2006, and their undisputed value, the field of Mustangs competing continues to grow -- with 31 cars currently being campaigned across America and now in Europe. Through July 2007, the FR500C won 5 of 8 races in the Grand American Road Racing KONI Challenge Series, and the FR500GT4 won its inaugural outing at Silverstone in FIA GT4. The FR500C -- worthy heir to Mustang’s unmatched racing heritage. MUSTANG FR500C RACE CAR M-FR500-C* A turnkey ready-to-run steed for Grand Am Cup GS class! The Mustang FR500C features the following: • Seam-welded, pre-paint, production body. Grand Am spec roll cage, attachment points and enclosures specifically for racing. • Ford Racing 5.0L “Cammer R50” engine. The heart of this purpose-built machine mated to our unique Tremec T-56 racing transmission. • Ford Racing brake and suspension upgrades • Add driver...and look for victory lane! ENGINE • Type: 5.0L “Cammer R50” STEERING • Steering Rack: Ford Racing rack and pinion • Power Steering: Ford hydraulic FUEL SYSTEM • Fuel Cell: ATL custom dual dry break—20 gallon • Fuel Pumps: Walbro 255L/H • Pressure Regulator: Ford—stock WHEELS • Manufacturer: Fikse • Size—Front: 18" x 10.0" • Size—Rear: 18" x 10.0" DIMENSIONS • Wheelbase: 107.1" • Front Track: 62.8" • Rear Track: 63.0" • Dry Weight: 3200 lbs. DRIVELINE • T-56 6-speed transmission • Trac-Tech C-Locker • Supercharged Cobra Clutch Kit BRAKES • Front: Brembo® 4-piston • Rear: Ford—stock • Master Cylinder: Ford Racing • ABS: Ford Racing CHASSIS • Type: Uni-body full seam welded with integrated safety cage • Structural Performance: Over 20,000 lb-ft/degree (torsional) • Construction: Ford—modified stock steel 14 Techline (800) FORD788 REAR SUSPENSION • Dynamic Suspensions—coil-over dampers • 3-way adjustable—high/low speed compression rebound • Ride height adjustable • 3-link with panhard bar • Urethane bushings FRONT SUSPENSION • Dynamic Suspensions—inverted struts • 3-way adjustable—high/low speed compression rebound • Ride height adjustable coil over • Urethane bushings • Adjustable anti-roll bar ANCILLARIES • C&R aluminum radiator with integrated oil cooler • Ford Racing Performance Parts exhaust system • Ford Racing Performance Parts high-flow intake system • SPARCO cable activated extinguisher COCKPIT • SPARCO racing seat • SPARCO 320mm steering wheel—quick release • SPARCO 6-point safety harness • Center mount console switches • AIM digital dash system—data logging and display FORD RACING PARTS FOR PRIVATEER BUILDERS... • M-6007-R50 Engine • 5.0L “Cammer R50” race engine. This is the only engine approved for Grand Am Cup racing in a 2005-07 Mustang. This is the same engine used in the Ford Racing Mustang FR500C racecar. M-7003-T56R TRANSMISSION • This is the only transmission approved for Grand Am Cup racing in a 2005-07 Mustang. This transmission was developed by Ford Racing and Tremec Transmission for use in the Ford Racing Mustang FR500C racecar. • M-7003-T56R 6-speed transmission with low helix 4615 steel alloy gears, one-piece counter shaft, heavy-duty pads, slip yoke configuration • Production 2005-06 throwout bearing which maintains hydraulic clutch actuation *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. ADDITIONAL FORD RACING PERFORMANCE PARTS LEGAL FOR GRAND AM CUP: • M-6038-R* M-1007-F1810* Wheel 18" x 10" Front • M-6379-B* M-1007-F1810A* Wheel 18" x 10" Rear • M-6397-A46* M-1124-R* Rotor Hat • M-7213-B* M-2001-R* Front Brake Pads – Race Calipers Only • M-7277-B* M-2005-A* Brake Duct Kit • M-8005-R* M-2005-R* Brake Master/Booster Assembly • M-9002-R* M-2134-R* FR500C Front Brake Caliper Bracket • M-9430-R50* M-2200-R* Rear Disc Brake Pad • M-9432-A54* M-2300-A* Front Brake Kit • M-12637-T50G* M-3052-R* Caster Adjusters • M-12650-BR50* M-3075-R* Front Control Arms • M-16620-R* M-3130-R2* FR500C Tie Rod End • M-18120-RFL* M-3200-R* Steering Rack with Reduced Assist • M-18120-RFR* M-3601-R* Steering Wheel • M-18120-RRL* M-4033-G2* Differential Cover with Bearing Supports • M-18120-RRR* M-4204-C31* 8.8" Locker • M-18183-R* M-4209-G355A* 8.8", 3.55:1 Ring and Pinion • M-18120-R* M-4211-B* 8.8" Gasket Kit • M-61108-R* M-4602-J* Drive Shaft • M-607100-R197* M-5230-R50* FR500C Exhaust System M-5649-R* Rear Control Arms • • • • • • • • • • • • • • • • • • • • • Motor Mounts Flywheel Bolts Clutch Bolt Kit Shift Knob Shift Boot Radiator Fuel Cell Headers Header Bolt Kit Fuel Charge Harness Engine Control Unit Race Seat FR500C Race Damper Front Left FR500C Race Damper Rear Right FR500C Race Damper Rear Left FR500C Race Damper Rear Right Caster Adjuster Kit Race Dampers 6-point Safety Harness Caged Body in White MUSTANG FR500C GRAND AM CUP ENGINE M-6007-R50* MUSTANG FR500C TRANSMISSION M-7003-T56R* Must be used to compete in Grand Am Cup with a 2005-07 Mustang Service replacement for the Mustang FR500C race car *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 15 COMPETITION MUSTANGS RACING MUSTANG FR500C FR500GT “COBRA” FR500GT4 SERIES GRAND-AM KONI CHALLENGE SERIES (GS) GRAND-AM ROLEX SPORTS CAR SERIES (GT) GT4 EUROPEAN CUP Primary Competition BMW M3, Porsche 996/997, Nissan 350Z Porsche GT3 Cup, Corvette, Pontiac GTO, Pontiac G6 Maserati, Porsche Cayman, BMW Z4, Aston Martin, Nissan 350Z Remarks Road racing at the grassroots level has soared over the past few years, and for Ford enthusiasts, few vehicles make better racecars than a Mustang. For those looking to take their first step into professional road racing, Ford Racing can meet those needs with the Mustang FR500C. With the success of the Mustang FR500C in the Grand-Am Cup Series, Ford Racing is moving up another level to create the “ultimate” Mustang production-based race car. Building on the success of the Mustang FR500C in North American racing, the car now competes overseas in the newly formed GT4 European Cup series. Homologated in 2007, the FR500GT4 is powered by a Ford Racing 5.0L “Cammer” V8 engine. Code-named “Boy-Racer”, this FR500C Mustang is a turn-key raceready car. Ford Racing offers two ways to get a driver behind the wheel of a 2005 Grand Am Koni Challenge Series Mustang. The first is to purchase a Mustang FR500C racecar ready to be driven to victory. The second is to take advantage of a number of race-ready parts available to the private builder. With its 5.0L “Cammer R50” engine, the FR500C is a proven winner, claiming the 2005 driver, team and manufacturer championships in its debut year in the Grand-Am series. In 2007, victory lane again became a familiar place for the vehicle as it won the first three events of the season. With an average of 11 Mustangs in any given Koni race, the FR500C is the car of choice for those looking to get behind the wheel of a proven competitive vehicle. Where/How to Buy 16 Available from a Ford Racing Dealer Visit FordRacing.com for details Techline (800) FORD788 Code-named “Man Racer,” this FR500GT Mustang is a race-ready car based on the basic body of the Ford Mustang. The FR500GT is raceprepped by Toronto-based Multimatic, a Ford performance supplier, and the Roush-Yates engine shop builds the aluminum V-8 engine. The noticeably large wing on the rear is in place for added down force. “Man Racer represents the reincarnation of the Trans-Am Mustang from the ’70s, which was the most powerful showroom-looking pony car at the time,” said Dan Davis, director, Ford Racing Technology. “This car has amazing output from a normally aspirated engine, and the chassis is specially tuned for highspeed performance and handling.” Available from a Ford Racing Dealer Visit FordRacing.com for details GT4 competition is a championship series where amateur-driving skill is key. The cars are factory-built race cars and are available to the public, while custom-built cars based on production models can also be built for competition. Vehicles competing in the series are modified so that all manufacturers have nearly identical performance levels. Ford once again partnered with Multimatic Motorsports for preparation of the FR500C for GT4 Cup competition. Available through Matech, our exclusive European Distributor for all FIA homologated FR Mustangs Visit FordRacing.com for details *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. COMPETITION MUSTANGS RACING MUSTANG FR500GT3 “COBRA” SCCA SOLO SCCA T2 SERIES FIA GT3 EUROPEAN CHAMPIONSHIP SCCA SOLO SCCA T2 Primary Competition Ascari, Aston Martin, Dodge Viper, Corvette Z06, Ferrari 430, Lamborghini Gallardo, Lotus Exige, Maserati, Porsche 997 The SCCA annually publishes the Solo Rules to classify a full range of imported and domestic sports cars, sedans and purpose-built race cars. The T2 class is comprised of performance sedans and coupes with only safety add-ons and a bare minimum of performance upgrades allowed. Remarks Homologated for the 2007 season, the Mustang FR500GT3 now competes in the FIA GT3 European Championship sports car racing series. With only small modifications able to be made to the vehicle, the FR500GT3 boasts a powerful 5.0L FR “Cammer” V8 engine. SCCA Solo racing is considered the most entry-level style of road racing. In this class of racing, a competitor can race any vehicle of any year that they choose. The Ford Mustang and Solo racing go hand in hand, because both offer a huge bang-for-the-buck. Without requiring a roll cage or other expensive race-only parts, every Mustang owner has the opportunity to compete at 1,500 different events annually. The modern Mustang has a legacy of competing in SCCA’s touring classes. Historically SVT’s Cobra-R models have frequently been put to the test and won in both T1 and T2 competition. Now trickle-down performance from the Grand-Am champion FR500C can make any 2005-and-up Mustang GT an SCCA T2 terror for the competition. The GT3 series was launched in 2006 as a way to expand manufacturer involvement in motorsports as well as to help amateur drivers across Europe. It attempts to combine multiple onemake series into a larger event with a race within a race, teams competing not only to beat others in their own manufacturer cup but also to win the overall race. For the process of homologating the FR500GT3 in 2007, Ford partnered with Toronto-based Multimatic, which also assisted in preparing the Mustang FR500C for GT4 European Cup competition. Where/How to Buy Available through Matech, our exclusive European Distributor for all FIA homologated FR Mustangs Visit FordRacing.com for details As opposed to other forms of racing, in Solo competition, there is no passing because even if two cars are racing one another head to head in elimination brackets the boundaries are clearly defined for each in an autocross manner. To win a Solo event the car must be nimble, brake well and provide excellent feedback to the driver so it’s no surprise Ford Racing equipped Mustangs compete and win against Corvettes and BMWs. Look through the FR Performance Packs, homologated for SCCA, available at your local Ford Dealer or Ford Racing performance distributor *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. Ford Racing’s Handling Pack, Power Upgrade Package and brake kit were all put into production on the Shelby GT. Thanks to homologation of Ford Racing parts found on the Shelby GT, any Mustang GT can compete with Subaru WRXs, Mitsubishi Lancer EVOs and Pontiac GTOs in T2 competition. SCCA T2 racing allows Mustang owners to take the next step from a street car in Solo towards a highspeed road race car that retains most street legal equipment with the addition of a roll cage and necessary safety equipment. Look through the FR Performance Packs, homologated for SCCA, available at your local Ford Dealer or Ford Racing performance distributor www.fordracingparts.com 17 COMPETITION MUSTANGS RACING MUSTANG FR500SC “COBRA” FR500S SERIES SUPER MUSTANG CHALLENGE SERIES MUSTANG CHALLENGE “MILLER CUP” Primary Competition FR500SC “Super Cup” A new Mustang Challenge Series is under development for 2008. Look for more information on www.fordracing.com. Remarks Encouraged by the first-year dominance of its FR500C Mustang race car in the Grand-Am Cup series, Ford Motor Company has developed what it describes as the ultimate Mustang showroom stock race car. Using the FR500GT platform, Ford Racing is developing the ultimate single-make Mustang Road Racing Series. Ford Racing and Miller Motorsports Park are working together to make an exciting single-make Mustang Road Racing series. Building on the tremendous success of the FR500C development platform, and incorporating real-world feedback from the professionals at MMP based on the experience gained with their School Mustangs, a new productionbased Mustang race car will be unleashed in 2008. Man Racer represents the reincarnation of the Trans-Am Mustang from the ’70s, which was the most powerful showroom-looking pony car at the time. This car has phenomenal output from a normally aspirated 5.0L “Cammer” engine, and the chassis is specially tuned for high-speed performance and handling complimented with full aero modifications. Where/How to Buy 18 Stay tuned for the new “Mustang Super Series” Techline (800) FORD788 Miller Motorsports Park *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. FOCUS MIDGET 2.0L ZETEC M-6375-ZX3** M-6584-ZX3** M-6600-ZX3** ENGINE REBUILDER PARTS Flywheel Cam Cover Gasket Oil Pump USAC FOCUS MIDGET ENGINE M-6007-USAC* • 2.0L Zetec race-ready engine • Supplied with engine dress for power steering applications • Available from Beast Enterprises or call Ford Racing Techline (800) FORD788 #1 James Anderson, #55 Jordan Pennington Alison MacLeod USAC Ford Focus Midget Series So, you want to get started in racing? The USAC Ford Focus Midget Series may be the avenue for you. #6 Mario Clauser, #21 Tyler Irwin The USAC Ford Focus Midget Series cars are based on a current USAC Midget car chassis and are powered by an internally production-stock, 2.0-liter Ford Focus Zetec engine. USAC competitors have enthusiastically received the Ford engine package for its power, drivability and reliability. The USAC Ford Focus Midget Series was designed to address the growing need for affordable, reliable, entry-level racing opportunities. USAC Midget racing has long been recognized as a preferred venue for the aspiring racer, and the USAC Ford Focus Midget Car Series is designed to give the aspiring racer a costeffective avenue to pursue racing -- and the proof is in the numbers. In 2007 alone, more than 140 Ford Focus Midgets have competed in more than 100 USAC Ford Focus Series Events. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. For inquiries about the USAC Ford Focus Midget Series, contact: USAC (317) 247-5151. To order a USAC Ford Focus Midget engine, contact: Beast Enterprises (317) 852-4411 or Ford Racing Techline (800) FORD788 www.fordracingparts.com 19 SPEC FOCUS ROADRACING HISTORY - The Ford Focus was launched in Europe in 1998 in Valencia, Spain and Saarlouis, Germany and was voted the European Car of the Year in 1999. Shortly after, the same team that launched the Focus platform in Europe came across the pond to launch the Focus in North America and again the car was named North American Car of the Year for 2000. The European Focus has since moved to a larger and heavier platform with essentially the same chassis configuration, while the North American Focus has stayed with the relatively lightweight, responsive platform of the original European design. OVERVIEW - Spec Focus is a roadracing class intended to provide affordable and close competition in a package that provides excellent performance with minimal setup time. Spec Focus runs nationwide and is sanctioned by the National Auto Sport Association (NASA), http://specfocus.drivenasa.com. BODY STYLES - Various Focus body styles are allowed in Spec Focus which allows competitors to choose from 3 or 4 door hatchbacks, 4 door sedans, and starting in 2008, 2 door coupes. SUSPENSION - The allowed suspension modifications in Spec Focus enhance the steering and handling characteristics that helped the car win both the European and North American Car of the Year awards without going to extremes with respect to either stiffness or setup complexity. The production style spring and damper package was developed specifically for this application and provides maximum performance out of the box without requiring extensive setup or testing. BRAKE - The SVT Focus brake package is legal for Spec Focus and provides 12" front rotors that produce excellent brake feel combined with lots of stopping power. In addition, because the brake kit is production based, spare parts can be obtained through any Ford dealer and racing specific brake pads can be obtained from a variety of sources. The large diameter of the brake package requires fitment of the 17" wheels offered on SVT models, of which there are several different styles with the same physical dimensions. ENGINE - The engine packages and allowances in Spec Focus were developed to allow the different engines offered in the Focus over the years to be competitive with each other without excessive penalties in terms of weight or power. All engines offered in the North American Ford Focus are legal for Spec Focus except for the 8 valve SPI engine. This includes: 2.0 Zetec (2000-04), 2.0 SVT Zetec with VVT (2002-04), 2.0 Duratec (2005+) and 2.3 Duratec (2003+). Engine modifications are specific for each engine variant and are designed to balance the combination of horsepower and torque to allow parity among all 4 engine variants on the track. Modifications range from minor bolt-ons allowed for the 2.3 Duratec to relatively extensive engine work for the 2.0 Zetec such as a ported cylinder head, more aggressive camshafts and performance intake and exhaust manifolds. 20 Techline (800) FORD788 RALLY Ford has a fantastic history of success in stage rally that stretches back almost 70 years with models like the Escort and now the Focus. Stage rallying is one of Ford Motor Company’s most successful international disciplines and since 1973 and 411 world rallies later, no other manufacturer has scored as many points as the Ford Motor Company. While the “factory” team competes with the most technically advanced race cars in the world, the need for an affordable, reliable, entry-level rally car was recognized as a way for the average sports-compact enthusiast to experience stage rallying. In the spring of 2006 the concept of the entry-level spec class based on the Ford Focus developed into the Rally Spec Focus. Following on from the initial success of the 2006 Rally Spec program, for 2007 the National Auto Sport Association’s Rally Sport region will run an eastern and western Focus Rally Cup Championship. Each championship will be run over four events covering varied surface like sand, gravel and tarmac. Rally Spec Focus is an entry-level spec class for stage rally sanctioned by NASA Rally Sport, www.rallyspecfocus. com. In Rally Spec Focus, rally teams of driver and co-driver compete in identically prepared Ford Focus rally with specific allowed component modifications. By ensuring parity between vehicles, competitors can concentrate on preparation and driving; and can compare their performance directly to other competitors with identical equipment. Mechanically, Rally Spec Focus cars remain essentially stock, with only modifications to the suspension and minor bolt-on intake and exhaust systems. While the stock Ford Focus 2.0 liter engine produces 130 hp, it is expected that a Rally Spec Focus car will produce in excess of 170 hp. All Rally Spec Focus vehicles can be equipped with available upgraded final drive ratio and torque biasing limited-slip differential. www.fordracingparts.com 21 2008 PERFORMANCE PARTS KEN GUSHI MUSTANG/”ALUMINATOR” FORMULA DRIFT PRO CHAMPIONSHIP FORD RACING HIGH PERFORMANCE DRIVING SCHOOL MILLER MOTORSPORTS PARK SHELBY GT-H MUSTANG FR500GT4 FIA GT4 EUROPEAN CUP 22 JOHN FORCE RACING - NHRA FUNNY CAR WORLD CHAMPIONSHIP DAVID EMPRINGHAM/TOM NASTASI/ MUSTANG FR500C - KONI CHALLENGE VICTORS AT DAYTONA MUSTANG FR500GT MUSTANG FR500 SHELBY GT500KR ERIC DEDONCKER/MUSTANG FR500GT4 FIA GT4 WINNERS AT OSCHERSLEBEN MUSTANG FR500GT3 FIA GT3 EUROPEAN CHAMPIONSHIP FORD RACING AMERICAN STAMPEDE Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-6 for important safety, emissions and warranty information. 2005-06 FORD GT Matech Concepts’ Ford GT leads the field during the FIA GT3 race at Silverstone. www.matech-concepts.ch the most up-to-date release information on these exciting new parts! Ford Racing Performance Parts is pleased to offer authentic Ford GT performance parts in this 2008 catalog. Perhaps no performance car in the history of the American automobile has better earned the right to reach legendary status among enthusiasts than the Ford GT40, and for good reason. Ford’s purpose-built endurance racer took the international auto racing world by storm in the mid-1960s, thanks to a storied 1-2-3 finish at Le Mans that led to other dominating performances across the globe in the years that followed. Today, the enthusiast world is again abuzz with excitement over the rebirth of Ford’s legendary supercar, the 2005-06 Ford GT. Though the sleek, familiar lines of the new Ford GT strongly recall the car’s glorious past, the design is a thoroughly modern interpretation of the original. And while its mission is still one of dominant performance, its target has moved from the racetracks of the world to the streets of America. In the tradition of authentic GT racers, the Ford GT’s doors wrap up into the roof and its quarter-panel scoops channel fresh air to the engine, which is the heart and soul of this modern American exotic. It simply looks and performs like nothing else on the road. Once its hand-built, all-alloy 550-horsepower supercharged V-8 is experienced at full song, the words “Powered by Ford” will surely define performance for a whole new generation of enthusiasts. • ENGINE: MOD 5.4-liter supercharged V-8 mounted midship. Alloy-block with aluminum four-valve heads, forged crankshaft, H-beam forged rods, aluminum pistons and a dry-sump oil system. Modified screw-type supercharger with water-to-air intercooler. In production form, the all-new Ford GT captures the very essence of Ford Racing, as well as the hearts and imagination of every blue-blooded Ford enthusiast. With the Ford GT now arriving at your local Ford dealership, Ford Racing Performance Parts is actively developing performance components to help each owner customize their Ford GT to personal desires. • TRANSAXLE: All-new, six-speed transaxle from Ricardo. Fully synchronized with integral, torque-sensing, limited-slip differential. Twin-plate clutch delivers low pedal efforts while providing the clamp loads necessary to handle 500 ft./lbs. of torque. Those who may never own a Ford GT can still benefit from FRPP’s ongoing development of Ford GT components. That’s because FRPP has developed ways to utilize enhanced hardware created for the Ford GT in hot rods, kit cars, and other high-performance Ford vehicles. Now, you can put some supercar in your Ford with Ford GT components by Ford Racing Performance Parts. Read on, visit our website or call our Techline for • FUEL: Delivered via dual fuel injectors per cylinder. • HORSEPOWER/TORQUE: 550 horsepower/500 lb-ft of torque. • SUSPENSION: Double-wishbone suspension design with unequal-length aluminum control arms, coil-over monotube shocks and stabilizer bars, front and rear. Upper control arms are the same at each corner. • BRAKES: Brembo® one-piece brake calipers with four pistons each. Cross-drilled, vented discs at all four wheels. The discs are 14 inches in front and 13.2 inches in the rear. Anti-lock control and electronic brake force distribution. • TIRES/WHEELS: One-piece BBS wheels with Goodyear Eagle F1 Supercar tires, size 235/45ZR-18 in front and 315/40ZR-19 in the rear. www.fordracingparts.com 23 FORD GT FORD GT POWER UPGRADE PACKAGE M-2005-GT • Fits 2005-06 Ford GT • Kit includes supercharger pulley and ProCal tool with official Ford Racing calibration • Approximately 100 hp increase • Detailed instructions included • E.O. # pending FORD GT FRONT WHEEL M-1007-GTF* FORD GT REAR WHEEL M-1007-GTR* • Forged front wheel available on 2005-06 Ford GT • Open lug design • 5-lug, 4.50" bolt circle • 6.90" backspacing • 50 mm offset • 18" x 9" wide • Includes Ford GT center cap • Rear wheel available on 2005-06 Ford GT • Open lug design • 5-lug, 4.50" bolt circle • 7.295" backspacing • 40 mm offset • 19" x 11.5" wide • Includes Ford GT center cap FORD GT SHORT THROW SHIFTER M-7210-GT FORD GT ALUMINUM SHIFT KNOB M-7213-GT • Fits Ford GT only • Reduces throw and cross gate by approximately 25% compared to stock • Anodized billet aluminum and stainless steel construction • Bolts in stock location • Includes hardware • Maintains production ergonomics by not relocating shift knob • Polished aluminum with GT logo and shift pattern • Includes decorative sleeve for shift lever FORD GT LICENSE PLATE FRAME M-1828-GT Plain M-1828-GTC Chrome • Billet aluminum • 12.625" wide x 6.125" tall x .355" thick • Milled in “Ford GT” logo 24 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. FORD GT PERFORMANCE MUFFLER KIT M-5230-GT* FORD GT LONG TUBE HEADERS M-9430-GT* • • • • Substantially louder than stock muffler Exits in stock location Mounts at all stock points Includes installation hardware • OFF-ROAD ONLY! NOT STREET LEGAL! • Strongly recommended if vehicle is equipped with M-9430-GT headers • • • • • • FORD GT REAR EXIT HEADERS M-9430-GTX* FORD GT COOLANT OVERFLOW CAP M-8006-GT • Replaces factory exhaust manifolds, cat pipe and mufflers • Two-piece construction with race style slip joint • 1 3/4" primary tube size • Includes collector type race mufflers • Includes installation hardware • OFF-ROAD ONLY! NOT STREET LEGAL! • Exits in stock location FORD GT BILLET OIL FILL CAP M-6766-GT • Ford GT oil fill cap with billet cover • Direct replacement for Ford GT oil fill cap • Fits most 1986-2004 Mustang GT • GT logo machined into cap surface • Chrome plated FORD GT TRANSAXLE COOLER KIT M-7095-GT • Kit includes cooler and all installation hardware, fittings, lines and brackets for Ford GT • A must for aggressive driving and open track events • OEM fit • Originally designed for production installation FORD RACING COIL COVERS M-6067-A • Fits most 1999 and newer 4.6L/5.4L DOHC engines with coil on plug ignition • Micro polished billet aluminum • Ford Racing logo Replaces factory exhaust manifolds and cat pipe Two piece construction with race style slip joint 1 3/4" primary tube size Bolts to stock muffler or M-5230-GT muffler Includes installation hardware OFF-ROAD ONLY! NOT STREET LEGAL! • Ford GT coolant overflow cap with billet cover • “GT” logo machined in cap surface • Fits both coolant overflow and intercooler reservoir FORD GT SEAT COVERS M-6360004-GT • Specifically designed for use in the Ford GT • Black 100% cotton construction • Features “Ford GT” embroidered in the headrest • One LH and one RH seat cover FORD GT TWO-PIECE FRONT ROTOR SET M-1125-GT* • Fits 2005-06 Ford GT • Two-piece 355 mm diameter front rotors for track use • Cross drilled for improved cooling • Aluminum hat reduces rotating and unsprung mass • Sold in sets of two • Fits with stock Ford GT calipers • Weighs 22.1 lbs each FORD GT TWO-PIECE REAR ROTOR SET M-2026-GT* • Fits 2005-06 Ford GT • Two-piece 330 mm diameter rear rotors for track use • Cross drilled for improved cooling • Aluminum hat reduces rotating and unsprung mass • Sold in sets of two • Fits with stock Ford GT calipers • Weighs 20.05 lbs each *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 25 FORD RACING CALIBRATION DYNAMOMETER TESTING AND FORD RACING CALIBRATIONS “Why do certain companies claim to make more power with their power upgrade kits than Ford Racing does with their kits?” To address that question properly, it is necessary to understand some of the intricacies of chassis dynamometer testing as well as some of the compromises that must be made in order to simultaneously meet performance, emissions, durability and safety objectives. Chassis Dynamometer testing There are two types of chassis dynamometer (dyno) in widespread use today. • An inertia dyno uses a large spinning drum that is accelerated by the drive wheels of the test vehicle. Power is then computed by knowing the inertia of the drum and how quickly it was accelerated. Torque can then be calculated by knowing the speed of the drum. • An eddy-current dyno absorbs and measures power by rotating a metallic disc through a magnetic field. Without getting into which dyno is more “correct” under what conditions, and why, we will simply say that these two types of dyno typically do not always give the same result even with all else being equal. It is generally not possible to accurately compare numbers from one type of dyno with those from the other type of dyno. Each type of dyno has its own advantages and disadvantages, but as long as all the tuning work is done on the same type of dyno, it doesn’t really matter which one is used. With any dyno testing there is a need for correction factors that are applied to the raw numbers the dyno actually measures. These correction factors are an attempt to correct for varying atmospheric conditions such as humidity, barometric pressure and air temperature. The two most common standards are SAE J1349 and SAE J607 (sometimes known as “STD” on some dynos). How correction factors are calculated is given in the “Crate Engine” section of this catalog. For this article, understand that these correction factors will give results that are different from each other with SAE J1349 typically about 4% lower than SAE J607. OEMs will almost always quote J1349 corrected numbers when advertising horsepower and torque. Whenever comparing dyno results, always be sure that the numbers are corrected to the same standard. Despite these correction factors, atmospheric conditions can play an additional role in terms of ignition timing. The correction factors account only for the change in the density of the air due to atmospheric conditions and cannot account for things like engine borderline spark sensitivity. As inlet air temperature increases, the PCM will generally retard spark to prevent detonation using the particular octane of fuel for which it was calibrated. Correction factors cannot account for this because different engine designs can have different spark sensitivity and different sensitivity of torque relative to ignition timing. Basically this means that the closer the actual conditions are to the SAE J1349 standard (77 deg F inlet air, 29.31 inHg barometric pressure) the more comparable the results are to those quoted by the manufacturer. Most horsepower numbers in the Ford Racing catalog have been determined by using the SAE J1349 standard. When testing a particular calibration or performance enhancing part by performing back to back dyno runs, it is critical to keep test conditions as similar as possible between the runs. This sounds obvious, but is very commonly overlooked by many aftermarket companies who frequently publish dyno charts depicting large gains, but fail to give all the necessary data to show the tests were run under similar conditions. In order to be certain that the test conditions are as similar as possible, the following data is mandatory and needs to be collected for each run: • Ambient air temperature • Barometric pressure • Inlet air temperature (on a forced induction car, this is usually downstream of the power adder) • Air/fuel (A/F) ratio (preferably upstream of any catalyst) Truly meaningful power numbers cannot be collected without this data! 26 Techline (800) FORD788 It is also a good idea to make sure the A/F ratio sensor in use on the dyno has not been exposed to leaded fuel and has not been in service for an excessive period of time (greater than six months, depending on frequency of use). A/F ratio is the single most important parameter to measure accurately when doing any sort of dyno tuning, so it is critical the sensor is providing accurate information. When doing any PCM calibration on a dyno, the resulting calibration will only be as good as the A/F sensor. These additional inputs should be used for ideal dyno testing and calibration. • Air/fuel ratio and spark advance commanded by the PCM • Fuel injector pulsewidth • Fuel pump duty cycle (in the case of ERFS) • MAF sensor voltage • Fuel pressure • Engine oil temperature • Differential oil temperature For Ford Racing calibrations we use all of the data inputs listed both as mandatory and ideal. How drivetrain affects wheel horsepower: Most chassis dyno tests are performed using the “roll-on” method, where the vehicle’s drive wheels are accelerated in a particular gear from a low speed to a high speed (generally to the rev limit of the engine) in one continuous sweep. Because of this constant acceleration, engine and transmission inertia, drive wheel inertia, gear ratio, and axle ratio can all affect the final measured horsepower. Generally a heavier wheel will take more torque to accelerate at the same rate as a lighter wheel, so heavier wheels will tend to reduce the measured wheel horsepower. Gear ratio comes into play because as the gear ratio strays from a 1:1, the efficiency drops and therefore the measured horsepower at the wheels also drops. This is why most dyno runs are run in the 1:1 gear (i.e., 4th gear in a 5 speed overdrive transmission) whenever possible. The same logic applies to axle ratio as well, which means that changing nothing but axle ratio can have an effect on measured wheel horsepower. Remember, this does NOT change brake (flywheel) horsepower, only the delivered wheel horsepower due to the change in drivetrain efficiency. How calibration can cause misleading dyno results: Production calibrations have an inferred catalyst temperature protection model which constantly calculates the temperature in the hottest part of the hottest catalyst. This calculated temperature is based on many PCM parameters, such as engine speed, load, ingested air mass, time, inlet air temperature, EGR flow rate and many others. When the catalyst model calculates that the catalyst temperature is about to exceed a level that is safe for the catalyst (generally around 1650 deg F), the PCM will richen the A/F mixture as necessary to lower the exhaust gas temperature and cool the catalyst. This richened A/F ratio will decrease power output, but is absolutely necessary to keep the catalyst from being permanently damaged. Unless A/F ratio is monitored during a dyno pull, the dyno operator will have no idea when catalyst temperature protection has been invoked and can make erroneous conclusions with regard to power output. As a trivial example of how this can affect dyno testing, consider a supercharged production vehicle with production calibration performing back to back runs under identical conditions except as noted. The car is driven to a dyno facility and immediately put on the dyno and a run is performed, yielding a result of 420 hp. In this example, A/F ratio is not monitored. A part is swapped for another “high-performance” part and another dyno run is performed, resulting in 430 hp. The dyno operator concludes the “highperformance” part is worth 10 hp. This is not accurate because when the car was first dyno tested, its catalysts were sufficiently hot that catalyst temperature protection was invoked during the dyno pull which reduced power output by richening the A/F ratio. While the car was having the parts swapped, the catalysts cooled down enough that during the next dyno pull catalyst temperature protection was not invoked. The engine made more power on the second pull because it was running a leaner A/F ratio closer to optimal and not necessarily because of the “high-performance” part. If the dyno operator was monitoring A/F ratio, this would have been readily apparent. www.fordracingparts.com 27 FORD RACING CALIBRATION If the operator was monitoring the A/F ratio commanded by the PCM, the invocation of catalyst temperature protection would become self evident. In this example, the erroneous conclusion that was reached suggested the “high-performance” part was worth 10 hp when it really wasn’t, but the opposite can also occur quite easily. Without covering every possible scenario, it will suffice to say that dyno numbers are ONLY meaningful when supporting data such as A/F ratio, inlet air temperature and the others listed above are also provided. There is also a model for oxygen sensor protection and exhaust valve protection that when not taken into account can cause misleading dyno data. In general, exhaust temperatures greater than about 1650 deg F can damage exhaust valves, and extreme care is taken in production calibrations to ensure that sustained engine operation beyond that temperature does not occur. This is rarely an instantaneous failure but rather one that over time “tulips” the exhaust valves and ultimately will fail the engine. Cold-air kits that claim to work without the need of a PCM recalibration are a common source of misleading dyno power claims. Some of these kits claim enormous power gains using nothing but their kit and a production calibration. Most of these claims are not supported with A/F, inlet temperature or spark advance traces during the dyno pulls that are shown in their advertising. In some cases, the apparent increase in power is due to differing dyno test conditions as mentioned previously, while in other cases they can be due to the fact that the MAF sensor transfer function in the PCM is left stock. If the cold-air kit flows more air, and the MAF transfer function in the PCM is stock it will not “know” about the extra air that’s entering the engine. This will result in the engine running an A/F ratio that is leaner than it should be for engine durability. While this has the potential to produce more power, it can also be potentially damaging to catalysts, exhaust valves, piston rings and other engine components. The commanded spark advance can also be incorrect and result in detonation or pre-ignition with potentially catastrophic results. Air inlet restrictions generally only become significant at higher airflows, so if a claim is made that a coldair kit increases torque at 2000 rpm without the aid of a calibration, you can be sure that varying dyno test conditions or a significant change in A/F ratio are the cause. Ask for more supporting data! Similar misleading results can be caused by a failure to keep inlet air temperature constant between runs. The PCM will retard spark timing to prevent detonation as inlet air temperature increases, lowering power output. On a forced induction car, the inlet air temperature is generally measured after the power adder (and after the intercooler, if applicable) and can be MUCH greater than ambient temperature. Careful monitoring of A/F ratio, and inlet air temperature, are critical to making accurate conclusions regarding the effectiveness of various high-performance parts. Secondary factors that also affect measured wheel horsepower are engine oil temperature, differential oil temperature, humidity, etc. It cannot be overstated that all conditions need to be as similar as possible between dyno runs in order to have a meaningful scientific conclusion, which requires the supporting data previously discussed. Ford Racing Calibrations The calibrations that Ford Racing provides for our cold-air and supercharger kits are done by Ford engineers who, in many cases, worked on the actual production vehicles. No one is more familiar with Ford engines and Ford control systems than Ford engineers. Extreme care is taken to provide as much power and torque as can be safely delivered, but also to deliver high durability and exceptional drivability. Most of our kits are also 50-State emissions legal and many are now even offered with a Ford Racing limited warranty. 28 Techline (800) FORD788 Here are a couple of aftermarket tuners practices that we do NOT recommend: • Turning off the inferred catalyst, oxygen sensor and exhaust valve temperature protection logic discussed in the previous section. This prevents the PCM from richening the A/F ratio to protect these components which can result in more power under certain conditions. The downside is drastically decreased durability of these expensive components. Ford Racing does not compromise durability by turning off this calibration logic. • They often advance spark timing to potentially unsafe levels. We test our calibrations in a wind tunnel and in hot dry weather to verify that potentially damaging spark knock or catastrophic pre-ignition does not occur. We also do cold weather and altitude testing as well as extensive emissions and durability testing on several vehicles before we release a calibration to the customer. Some companies do not realize that they need to perform this type of testing in the first place! Automatic transmission calibration is an area that Ford Racing sets itself apart from other “tuners”. We generally make extensive calibration changes to not only improve shift quality and give the transmission a more performance oriented feel, but take great care to ensure that durability is not compromised to levels we feel would be unacceptable to a customer. In development we monitor things like clutch slip times, slip energies, band temperatures and other variables to make calibration changes as appropriate so that the customer can be sure of a quality product that will continue to deliver improved performance in the long term. As mentioned before, these changes are performed by the same engineers who designed and developed the vehicles in the first place, and who are more familiar than anyone with their performance and durability envelopes. Some aftermarket tuners develop their calibrations exclusively on a chassis dyno and go straight to the end customer. While dyno work is a critical part of the development process, it is only one piece of a complex puzzle. Calibrating for wide open throttle (WOT) is generally simple, but the bulk of the calibration effort is getting the part (and closed) throttle drivability correct. Our calibrations are developed not only on the dyno, but also on the street for production (or better) quality drivability, and across many vehicles to allow for manufacturing tolerances. Varied driving conditions, constant data monitoring, and long-term testing ensure consistent drivability. In recent years, cars and trucks have shifted toward electronic throttle control (ETC) or “drive-by-wire” systems for packaging, cost and enhanced calibration functions. Ford Racing calibrations for ETC vehicles take advantage of some of the increased functionality offered by these systems by changing the relationship between the pedal and the throttle for improved “performance feel”. This allows us to provide substantial improvements in “performance feel” even on the kits where the peak horsepower increase might be considered modest by some. The peak power numbers do not always tell the whole story. Why some companies claim to make more power: Some claims are due to poor and misleading dynamometer test practices. Others are genuine but at the expense of engine, catalyst or drivetrain durability. Hopefully this article gives you the tools necessary to determine what is real dyno horsepower, manipulated false horsepower and temporary horsepower waiting to cause a failure. We are confident that as a potential customer you will agree that no one knows your car or truck better than the Ford engineers who designed it in the first place. Our kits offer the best blend of performance, durability and drivability that exists on the market today. www.fordracingparts.com 29 2007-08 SVT MUSTANG PERFORMANCE PACKS Ford Racing Limited Warranty 2005-08 Model Year Mustang Parts, when Ford, Lincoln or Mercury Dealer or Shelby Automotive, Inc. Installed Register for Warranty: To register a vehicle for Ford Racing limited warranty coverage, a Ford, Lincoln or Mercury Dealer or Shelby Automotive, Inc. must call the Ford Performance Call Center (800) 367-3788 with P&A Code, the vehicle identification number (VIN), part installation repair order number and date, Ford Racing part number and owner information. Mustang Packs (and Select Parts if installed separately) Ford Racing Limited Warranty, when Ford, Lincoln or Mercury Dealer or Shelby Automotive, Inc. Installed 3 Years/36,000 Mile Limited Warranty Coverage/Eligibility: Ford Racing warrants the subject parts for 3 years/36,000 miles (whichever comes first) when installed by a Ford, Lincoln or Mercury Dealer or Shelby Automotive, Inc. on a new vehicle at the time of vehicle sale, or 12 months/12,000 miles (whichever occurs first) when installed after the date of vehicle sale but prior to the expiration of the 3 years/36,000 mile coverage (whichever occurs first) under the New Vehicle Limited Warranty. Eligible Parts Mustang V6 Mustang GT SVT Mustang FR1 Power Upgrade Pack FR3 Handling Pack Cold Air Kit (Included on Power Upgrade Kit) V6 Cat-Back Dual Exhaust System with X Pipe Short Throw Shifter Mustang GT Exhaust X-Pipe M-2007-FR1V6 M-2007-FR3V6 M-9603-V605 M-5230-V6 M-7210-V N/A M-2006-FR1 M-2005-FR3 M-9603-GT06 N/A M-7210-T1 M-5251-R M-2007-FR1SVT M-2007-FR3SVT M-9603-SVT07 N/A M-7210-B N/A Supercharger Ford Racing Limited Warranty, when Ford, Lincoln or Mercury Dealer or Shelby Automotive, Inc. Installed 12 Months/12,000 Mile Limited Warranty Coverage/Eligibility: Ford Racing warrants the subject parts for 12 months/12,000 miles from the time of installation when installed by a Ford, Lincoln or Mercury Dealer or Shelby Automotive, Inc. prior to the vehicle reaching either 36 months or 36,000 miles (whichever occurs first) from the vehicle warranty start date and found to be defective in Factory-supplied material or workmanship. This warranty replaces the existing manufacturer’s warranty for engine, driveline and suspension parts with a 12 month or 12,000 miles warranty. Eligible Parts 400 hp Twin Screw SC (Black) ’05-’06 MY 400 hp Twin Screw SC (Polished) ’05-’06 MY 400 hp Twin Screw SC (Black) ’07-’08 MY 400 hp Twin Screw SC (Polished) ’07-’08 MY 605 hp SC Kit (Black) ’07-’08 MY Mustang V6 Mustang GT SVT Mustang N/A M-6066-M463V M-6066-M463P M-6066-M463V7 M-6066-M463P7 N/A M-6066-SGT For complete details on the Ford Racing Limited Warranty Program, please go to www.fordracingparts.com 2007-08 SVT MUSTANG SUPERCHARGER UPGRADE KIT M-6066-SGT* Black Wrinkle Finish • Fits 5.4L DOHC 2007-08 SVT Mustang • 105 hp increase over stock (605 hp vs. 500 hp), 90 lb-ft increase in torque over stock (570 lb-ft vs. stock 480 lb-ft) using correction factor SAE J1349 • 2.3L Twin Vortices Series Eaton supercharger features 4-lobe 160 degree twist rotors • Includes open element cold air intake system • Includes Pro-Cal tool voucher with kit • Engineered by Roush for Ford Racing • Premium fuel required • Available as part of Shelby Super Snake Package • 2007 SVT Mustangs must use upgraded damper M-6312-SVT (see www.fordracingparts.com) to maintain warranty coverage • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • E.O. # Pending See www.fordracingparts.com for the most up-to-date warranty information. 30 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2007-08 SVT MUSTANG PERFORMANCE PACKS POWER UPGRADE PACKAGE For drivers who want to power up and still maintain mild street manners, the Power Upgrade Package offers a slightly throatier exhaust note and a new mass air meter with calibration. The result is approximately 40 horsepower! With the Power Upgrade Package’s easy bolt-ons, it takes just an afternoon in the driveway to install. The Power Upgrade Package includes the Ford Racing Flash Tuner to ensure proper calibration. 2007-08 SVT MUSTANG POWER UPGRADE PACKAGE M-2007-FR1SVT • Don’t settle for exaggerated dyno power or compromised durability. Bolt on a Ford Racing Power Upgrade Package and get repeatable, safe and SAE-proven horsepower! • Improved throttle response and power under the entire curve • Fits 2007-08 SVT Mustang • Standard on Shelby GT500KR • 40 hp increase over stock per SAE J1349 • 113 mm Cold Air Kit M-9603-SVT07 • Muffler Kit M-5230-SVT1 • Performance Oil Filter • Premium fuel only • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit. • 50-States Street Legal E.O. #D-418-9 See www.fordracingparts.com for the most up-to-date warranty information. 2005-08 SVT MUSTANG MUFFLER SET 50 STATE M-5230-SVT1 • • • • Fits 2007-08 SVT Mustang T-304 stainless construction Deeper, “throatier” exhaust note Ford Racing embossed 3.5" polished exhaust tips • 50 States drive-by noise legal 2007-08 SVT MUSTANG MUFFLER SET 49 STATE M-5230-SGT* • • • • Fits 2007-08 SVT Mustang T304 stainless construction Louder, throatier exhaust Includes mufflers with Ford Racing embossed 3.5" tips • 49-State drive-by noise legal (not legal in California) FORD RACING HIGH-PERFORMANCE OIL FILTER M-6731-FL820 (case of 12) • Synthetic-Polymer/Cellulose-Fiber blend media • Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance • High-quality silicone anti-drain back valve • Non-stick sealing gasket for ease of installation and removal • Long life with standard and synthetic motor oils • Up to 50% more filtering capacity than standard filters • Improved filtering efficiency • This technology is only available through Ford Racing Performance Parts 2007-08 SVT MUSTANG 113 MM COLD AIR KIT M-9603-SVT07 • • • • • • Fits 2007-08 SVT Mustang Kit includes 113 mm Mass Air Meter Mounts in the stock location Premium fuel only 40 hp increase over stock using correction factor SAE J1349 DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • E.O. #D-418-9 See www.fordracingparts.com for the most up-to-date warranty information. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 31 2007-08 SVT MUSTANG PERFORMANCE PACKS DRAG PACK 2007-08 SVT MUSTANG DRAG PACK M-2007-FR2SVT If you feel the need for speed, get the Drag Pack from FRPP. This kit harkens back to the days of big block Ford power and provides the modular Mustang engine with that same big block performance. With the Drag Pack, you’ll launch harder and accelerate faster while maintaining factory drivability. Drag racing should be conducted at enclosed, dedicated facilities only. • Fits 2007-08 SVT Mustang • 113 mm Cold Air Kit M-9603-SVT07 • 3.73 ratio Ring and Pinion M-4209-F373N • Gear Installation Kit M-4210-A • Shorty Headers M-9430-C54C • Short Throw Shifter designed by Ford Racing and Hurst M-7210-B • Performance Oil Filter • Premium fuel only • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • 50-States Street Legal E.O. #D-418-9 2007-08 SVT MUSTANG 113MM COLD AIR KIT M-9603-SVT07 FORD RACING HIGH-PERFORMANCE OIL FILTER M-6731-FL820 (case of 12) • Fits 2007-08 SVT Mustang • Kit includes 113 mm Mass Air Meter and voucher for Pro-Cal tool with official Ford Racing calibration • Mounts in the stock location • Premium fuel only • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • 40 hp increase over stock SAE J1349 • 50-States Street Legal E.O. #D-418-9 See www.fordracingparts.com for the most up-to-date warranty information. • Synthetic-Polymer/Cellulose-Fiber blend media • Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance • High-quality silicone anti-drain back valve • Non-stick sealing gasket for ease of installation and removal • Long life with standard and synthetic motor oils • Up to 50% more filtering capacity than standard filters • Improved filtering efficiency • This technology is only available through Ford Racing Performance Parts MUSTANG 8.8" RING GEAR AND PINION SET PART NUMBER RATIO M-4209-F373N* 3.73:1 2007-08 SVT MUSTANG SHORTY HEADERS M-9430-C54C* • Fits 2007-08 SVT Mustang • 409 stainless steel tubes, 1 7/8" diameter with Jet-Hot® ceramic finish • Machined flange • 9 lbs lighter than cast iron manifolds • Bolts to stock exhaust pipes • Includes gaskets, bolts and studs 32 Techline (800) FORD788 2007-08 SVT MUSTANG SHIFTER M-7210-B • Fits 2007-08 SVT Mustang • Standard on Shelby GT500KR • Urethane body vibration isolators • 25% reduction in throw • Bolts in stock location • Requires reuse of production handle and knob See www.fordracingparts.com for the most up-to-date warranty information. 8.8" RING & PINION INSTALLATION KIT M-4210-A • Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts and cover gasket • Use for changing ring and pinion gear or differential • Fits IRS *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2007-08 SVT MUSTANG PERFORMANCE PACKS HANDLING PACK 2007-08 SVT MUSTANG HANDLING PACK M-2007-FR3SVT • Make your SVT Mustang a corner carving sidewinder with the added performance of the FR3 Handling Pack • Uniquely tuned exclusively to fit 2007-08 SVT Mustang Coupe • Handling Pack includes dampers (M-18000-C), lowering springs (M-5300-L), anti-roll bar kit (M-5490-B) and strut tower brace (M-20201-C) • All components are designed to work together as a package • Lowers car approximately 1.250" • Dampers are adjustable and manufactured by Dynamic Suspensions (the same company that makes dampers for the FR500C race car) NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. FPO See www.fordracingparts.com for the most up-to-date warranty information. 2007-08 SVT MUSTANG LOWERING SPRINGS M-5300-L 2007-08 SVT MUSTANG ANTI-ROLL BAR KIT M-5490-B • • • • • Anti-roll bar kit designed for increased handling and performance on 2007-08 SVT Mustang coupe • Designed to be used with M-18000-C damper kit, M-5300-L spring kit and M-20201-C strut tower brace • Includes all mouting hardware NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. Fits 2007-08 SVT Mustang coupe Lowers car approximately 1.25" Engineered specifically for improved handling on 2007-08 SVT Mustang Recommended for use with M-18000-C damper kit and M-5490-B anti-roll bar kit • May cause slightly harsher ride compared to stock springs NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2007-08 SVT MUSTANG DAMPERS KIT M-18000-C • Fits 2007-08 SVT Mustang • Engineered specifically for improved handing on the 2007-08 SVT Mustang • Single adjustment with two-way response • Tuned to work with both stock ride height and lowered 2007-08 SVT Mustangs • Recommended for use with M-5300-L spring kit, M-5490-B anti-roll bar kit and M-20201-C strut tower brace. NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2007-08 SVT MUSTANG STRUT TOWER BRACE M-20201-C • Fits 2007-08 SVT Mustang • Black powder coated with etched Ford Racing logo • Single large diameter oval tube construction • Standard on Shelby GT500KR NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 33 SVT MUSTANG 2007-08 SVT MUSTANG WHEEL M-1007-S1895* ➀ 2007-08 SVT MUSTANG WHEEL BLACK M-1007-S1895B* ➀ • Fits 2005-08 Mustang GT and the 2007-08 SVT Mustang • 5-lug, 4.50" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007-08 SVT Mustang • Fits 2005-08 Mustang GT and 2007-08 SVT Mustang • 5-lug, 4.50" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007-08 SVT Mustang except wheel openings are gloss black 2007-08 SVT MUSTANG BLACK WHEEL WITH MACHINED LIP M-1007-S1895B1* ➀ 2007 SVT MUSTANG HIGH LIFT CAM SET M-6550-GT* • Fits 2005-08 Mustang GT and 2007-08 SVT Mustang • 5-lug, 4.50" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007 SVT Mustang except wheel face is gloss black with a machined lip BRAKE COOLING KIT M-2004-A • Fits 2007-08 SVT Mustang • Fits 2005-08 Mustang GT with M-2300-S brake kit installed • Includes backing plates with duct work • Designed to direct air from the fascia to the rotor for improved brake and wheel bearing life 2007 SVT MUSTANG FRONT STRUT MOUNT PAIR M-18183-A • Fits 2005-08 Mustang GT • Original equipment on the 2007 SVT Mustang • Increased durometer, 28% stiffer than Mustang GT 2007-08 SVT MUSTANG FRONT LOWER CONTROL ARM KIT M-3075-E 2007-08 SVT MUSTANG REAR LOWER CONTROL ARMS M-5538-A • Fits 2005-08 Mustangs • Original equipment on 2007-08 SVT Mustang • Increased strength ball joints • Kit contains 1 RH and 1 LH lower control arm assembly NOTE: Some factory fasteners are one-time use. Please reference Ford sevice manual for reuse information and correct torque specifications. • Fits 2005-08 Mustang • Original equipment on 2007-08 SVT Mustang • Increased bushing durometer and stiffness for higher horsepower applications NOTE: Some factory fasteners are one-time use. Please reference Ford sevice manual for reuse information and correct torque specifications. NOTE: ➀ For vehicles with 16" wheels from the factory: -installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA -Installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA 34 • Original equipment camshafts for the Ford GT supercar • Direct retrofit to the 2007-08 SVT Mustang • Increases lift from the stock 10 mm to 11.14 mm intake and 11.36 mm exhaust • Compatible with production springs, followers and lash adjusters • May require calibration to achieve optimized performance Techline (800) FORD788 For vehicles with 17" wheels from the factory: -installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. SUPERCHARGED 5.4L 2008 SVT MUSTANG ENGINE M-6007-C54** • 500 hp supercharged 5.4L DOHC engine • Original equipment in the 2008 SVT Mustang • 500 hp @ 6000 rpm, 480 lb-ft of torque @ 4500 rpm • Fully dressed including accessories and supercharger • Does not include vehicle wiring and PCM • Calibration code 8S-253-AA • The most powerful Mustang production engine ever! • Perfect for your high-end project! See Also: Crate Engine Build-Up “Cammer Engine” Build-Up Crate Engine Warranty Engine Tips & Specs Crate Engine Catalog 2007-08 SVT MUSTANG SMOKED CHROME VALVE COVERS M-6582-CC** • Fits 2007-08 SVT Mustang • Original equipment valve cover powder coated for chrome appearance • Contains new gaskets and grommets for easy installation • Can be used with factory coil covers or M-6067-A or M-6067-GT coil covers • Also avaliable in blue, M-6582-C 2007-08 SVT MUSTANG BLUE COATED VALVE COVERS M-6582-C** • Fits 2007-08 SVT Mustang • Original equipment valve cover powder coated same blue as Ford GT • Contains new gaskets and grommets for easy installation • Can be used with factory coil covers or M-6067-A or M-6067-GT coil covers • Also avaliable in smoked chrome appearance, M-6582-CC 2007-08 SVT MUSTANG COIL COVERS M-6067-C • Original equipment on the 2007-08 SVT Mustang • Fits 1999-up 32V 4.6/5.4L engines 4.6/5.4L “POWERED BY FORD” COIL COVERS M-6067-GT • Original equipment on the Ford GT 5.4L DOHC • Fits 1999–up 32V 4.6/5.4L engines FORD RACING COIL COVERS M-6067-A • Fits 4.6L/5.4L DOHC engines with coil on plug ignition • Micro polished billet aluminum • Features two-color Ford Racing ball milled logo *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 35 SVT MUSTANG 2007-08 SVT MUSTANG STEERING WHEEL M-3600-C SVT BLACK STITCH WHEEL AND BOOT M-3601-C • Fits 2005-08 Mustang • Dark charcoal leather with red stitching • Does not include air bag. Mustang air bag can be reused • Uniquely contoured for performance driving! • Original equipment on 2007-08 SVT Mustang • Fits the 2005-08 Mustang and 2007-08 SVT Mustang • Same as 2007-08 SVT Mustang dark charcoal leather but with black stitching • Does not include air bag. Mustang air bag can be reused • Steering wheel uniquely contoured for performance driving 2007-08 SVT MUSTANG HOOD M-16612-C 2007-08 SVT MUSTANG REAR SPOILER M-16600-SVTC • • • • Original equipment on 2007-08 SVT Mustang Bolts to stock hood hinges and uses stock hood latch Includes two hood grill inserts Fits 2005-08 Mustang GT when used with 2007-08 SVT Mustang fascia Front edge of SVT hood interferes with stock GT fascia • Must be fitted and painted to match color of car 2007-08 SVT MUSTANG PARKING BRAKE LEVER M-2302-C 2007-08 SVT MUSTANG “COBRA” FENDER EMBLEMS M-1447-C • Fits 2005-08 Mustang GT • Original equipment on 2007-08 SVT Mustang • Features leather wrapped handle • Complete assembly • Original equipment on 2007-08 SVT Mustang • Includes right and left side emblems • 4.250" tall by 2.50" wide FORD GT START BUTTON KIT FOR MUSTANG M-11572-GT “COBRA” SNAKE FAUX FUEL DOOR M-2301-S Easy upgrade to enhance the appearance of your 2005-08 Mustang • Fits in the existing Power Point located in the center of the dash • Turn the key to the on position then press the button • Red illumination only • Includes special wire harness for easy installation 36 • Fits 2005-08 Mustang GT • Original equipment on 2007-08 SVT Mustang • Fits into existing Mustang GT spoiler bolt holes • No drilling required when installed on Mustang GT with factory spoiler • Must be painted to match color of car Techline (800) FORD788 • • • • Fits 2005-08 Mustang Features the Cobra Snake Two-way tape for easy installation Unique Ford Racing offering *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2005-08 MUSTANG LIGHTED SVT SILL PLATES M-13208-LSVT • • • • • Fits 2005-08 Mustangs Improves appearance and protects vehicle entry area Black with brushed stainless steel insert with “SVT” logo SVT illuminates red Kit includes two sill plates, installation tape and instructions 2007-08 SVT MUSTANG ENTRY GUARD M-13208-C • • • • • • Fits 2005-08 Mustang Original equipment on 2007-08 SVT Mustang Improves appearance and protects vehicle entry area Black with brushed stainless insert Kit includes left and right entry guards Two-way tape for easy installation 2005-08 MUSTANG LIGHTED FORD RACING SILL PLATES M-13208-LFR • • • • • Fits 2005-08 Mustangs Improves appearance and protects vehicle entry area Black with brushed stainless steel insert with “Ford Racing” logo Ford illuminates blue, Racing illuminates red Kit includes two sill plates, installation tape and instructions 2005-08 MUSTANG ENTRY GUARD M-13208-M100 • • • • • *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. Fits 2005-08 Mustang Improves appearance while protecting vehicle entry area Made of stainless steel with “Ford Racing” logo Entry guards are not scratch-resistant Kit includes two guards, installation tape and instructions www.fordracingparts.com 37 2005-08 MUSTANG GT CHECK FORDRACINGPARTS.COM FOR MORE 2005-08 MUSTANG PARTS. The new 2005-08 Mustang has quickened the hearts of performance enthusiasts everywhere. With a design that hails back to the early days of Trans-Am where Mustang was king, the new Mustang looks fast even standing still. Since day one, the Mustang’s performance traits, combined with its popularity, made it a natural choice for racers and racing fans alike. It soon became a regular in the winner’s circle in nearly every facet of amateur and professional motorsports. The exciting new FR500C keeps that winning tradition alive in the Grand Am Cup series, and is setting standards for reliability and consistency. Of course, you don’t need to race to enjoy enhanced performance. Street cars benefit from FRPP parts engineered and tested through racing, increasing the performance of any Mustang at a stoplight or twisting through a mountain highway. The new Mustang is a keeper and it’s never been a better time to be a Mustang and Ford Racing enthusiast. With high quality and performance wrapped in modern sheetmetal that harkens back to the days of big block performance, Mustang gallops into the future as America’s best sporty, fun-to-drive car. If that proven formula sounds familiar, it’s no accident. Ford Racing has exciting parts to add to that fun-to-drive equation, and you can be sure that even more parts are in development to ensure your Mustang is a winner on the street or on the racetrack. Ford Racing Limited Warranty 2005-08 Model Year Mustang Parts, when Ford, Lincoln or Mercury Dealer Installed Register for Warranty: To register a vehicle for Ford Racing limited warranty coverage, a Ford, Lincoln or Mercury Dealer must call the Ford Performance Call Center (800) 367-3788 with P&A Code, the vehicle identification number (VIN), part installation repair order number and date, Ford Racing part number and owner information. Mustang Packs (and Select Parts if installed separately) Ford Racing Limited Warranty, when Ford, Lincoln or Mercury Dealer Installed 3 Years/36,000 Mile Limited Warranty Coverage/Eligibility: Ford Racing warrants the subject parts for 3 years/36,000 miles (whichever comes first) when installed by a Ford, Lincoln or Mercury Dealer on a new vehicle at the time of vehicle sale, or 12 months/12,000 miles (whichever occurs first) when installed after the date of vehicle sale but prior to the expiration of the 3 years/36,000 mile coverage (whichever occurs first) under the New Vehicle Limited Warranty. Eligible Parts Mustang V6 Mustang GT SVT Mustang FR1 Power Upgrade Pack FR3 Handling Pack Cold Air Kit (Included on Power Upgrade Kit) V6 Cat-Back Dual Exhaust System with X Pipe Short Throw Shifter Mustang GT Exhaust X-Pipe M-2007-FR1V6 M-2007-FR3V6 M-9603-V605 M-5230-V6 M-7210-V N/A M-2006-FR1 ➀ M-2005-FR3 M-9603-GT06 ➀ N/A M-7210-T1 M-5251-R M-2007-FR1SVT M-2007-FR3SVT M-9603-SVT07 N/A M-7210-B N/A Supercharger Ford Racing Limited Warranty, when Ford, Lincoln or Mercury Dealer Installed 12 Months/12,000 Mile Limited Warranty Coverage/Eligibility: Ford Racing warrants the subject parts for 12 months/12,000 miles from the time of installation when installed by a Ford, Lincoln or Mercury Dealer prior to the vehicle reaching either 36 months or 36,000 miles (whichever occurs first) from the vehicle warranty start date and found to be defective in Factory-supplied material or workmanship. This warranty replaces the existing manufacturer’s warranty for engine, driveline and suspension parts with a 12 month or 12,000 miles warranty. Eligible Parts 400 hp Twin Screw SC (Black) ’05-’06 MY 400 hp Twin Screw SC (Polished) ’05-’06 MY 400 hp Twin Screw SC (Black) ’07-’08 MY 400 hp Twin Screw SC (Polished) ’07-’08 MY 605 hp SC Kit (Black) ’07-’08 MY Mustang V6 Mustang GT SVT Mustang N/A M-6066-M463V M-6066-M463P M-6066-M463V7 ➀ M-6066-M463P7 ➀ N/A M-6066-SGT For complete details on the Ford Racing Limited Warranty Program, please go to www.fordracingparts.com ➀ See www.fordracingparts.com for 2008 applications 38 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. SUPERCHARGERS MUSTANG GT SUPERCHARGER KITS M-6066-M463V Black Wrinkle M-6066-M463P Polished • Fits 2005-2006 Mustang GT with MANUAL or AUTOMATIC transmission • See www.fordracingparts.com for 2008 manual and automatic transmission applications • Produces 400 hp with 93 octane at approximately 5 psi of boost • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. See www.fordracingparts.com for the most up-to-date warranty information 2005-06 MUSTANG 4.6L BIG BOOST KIT M-9066-M11 • Big Boost kit converts M-6066-M463V/M463P from 400 hp to 500 hp • Fits 2005-06 Mustang GT with MANUAL transmission ONLY. • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11psi of boost! • Kit includes intercooling system, M-9407-GT05 fuel pump kit and smaller pulley • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Includes Pro-Cal voucher with official Ford Racing calibration • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only M-6066-M463V7 Black Wrinkle M-6066-M463P7 Polished • Fits 2007 Mustang GT with MANUAL or AUTOMATIC transmission • See www.fordracingparts.com for 2008 manual and automatic transmission applications • Produces 400 hp with 93 octane at approximately 5 psi of boost • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. 2007 MUSTANG 4.6L BIG BOOST KIT M-9066-M117 • Big Boost kit converts M-6066-M463V7/M463P7 from 400 hp to 500 hp • Fits 2007 Mustang GT with MANUAL transmission ONLY. • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11psi of boost! • Kit includes intercooling system, M-9407-GT05 fuel pump kit and smaller pulley • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Includes Pro-Cal voucher with official Ford Racing calibration • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only M-9066-M11 shown *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 39 SUPERCHARGERS 500HP MUSTANG GT SUPERCHARGER KITS M-6066-M11 Black Wrinkle M-6066-M11P Polished • Fits 2005-06 Mustang GT with MANUAL transmission ONLY • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! • Produces 470 lb-ft of torque at 4200 rpm • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher with official Ford Racing calibration • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Similar to 400 hp kit but with smaller pulley, complete air to liquid intercooler system and dual fuel pump, fuel pump driver and harness • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. M-6066-M117* Black Finish M-6066-M11P7 Polished • Fits 2007 Mustang GT with MANUAL transmission ONLY • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! • Produces 470 lb-ft of torque at 4200 rpm • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher with official Ford Racing calibration • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Similar to 400 hp kit but with smaller pulley, complete air to liquid intercooler system and dual fuel pump, fuel pump driver and harness • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. 40 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2005-08 MUSTANG GT PERFORMANCE PACKS POWER UPGRADE PACKAGES For drivers who want to power up and still maintain mild street manners, the Power Upgrade Package offers a slightly throatier exhaust note and a new mass air meter with calibration. The result is approximately 20 horsepower! With the Power Upgrade Package’s easy bolt-ons, it takes just an afternoon in the driveway to install. The Power Upgrade Package includes the Ford Racing Flash Tuner to ensure proper calibration. MUSTANG POWER UPGRADE PACKAGE M-2006-FR1 • Fits 2005-07 Mustang GT with manual or automatic transmission. See www.fordracingparts.com for 2008 applications • Kit includes: 90 mm Cold Air Kit M-9603-GT06 Muffler Kit M-5230-GTA Performance Oil Filter • Premium fuel only • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Standard on the Shelby GT and GTH • Approximate increase of 20 horsepower • 50-States “Street Legal” (E.O. #D-598) Ford Racing Limited Warranty 2005-08 Model Year Mustang Parts, when Ford, Lincoln or Mercury Dealer Installed Register for Warranty: To register a vehicle for Ford Racing limited warranty coverage, a Ford, Lincoln or Mercury Dealer must call the Ford Performance Call Center (800) 367-3788 with P&A Code, the vehicle identification number (VIN), part installation repair order number and date, Ford Racing part number and owner information. Mustang Packs (and Select Parts if installed separately) Ford Racing Limited Warranty, when Ford, Lincoln or Mercury Dealer Installed 3 Year/36,000 Mile Limited Warranty Coverage/Eligibility: Ford Racing warrants the subject parts for 3 years/36,000 miles (whichever comes first) when installed by a Ford, Lincoln or Mercury Dealer on a new vehicle at the time of vehicle sale, or 12 months/12,000 miles (whichever occurs first) when installed after the date of vehicle sale but prior to the expiration of the 3 years/36,000 mile coverage (whichever occurs first) under the New Vehicle Limited Warranty. Eligible Parts Mustang V6 Mustang GT SVT Mustang FR1 Power Upgrade Pack FR3 Handling Pack Cold Air Kit (Included on Power Upgrade Kit) V6 Cat-Back Dual Exhaust System with X Pipe Short Throw Shifter Mustang GT Exhaust X-Pipe M-2007-FR1V6 M-2007-FR3V6 M-9603-V605 M-5230-V6 M-7210-V N/A M-2006-FR1 ➀ M-2005-FR3 M-9603-GT06 ➀ N/A M-7210-T1 M-5251-R M-2007-FR1SVT M-2007-FR3SVT M-9603-SVT07 N/A M-7210-B N/A ➀ See www.fordracingparts.com for 2008 applications See www.fordracingparts.com for the most up-to-date warranty information. 2005-08 MUSTANG GT MUFFLER SET M-5230-GTA • 409 stainless body with highly polished 4.0" diameter tips • Louder, throatier exhaust note • 50-States drive-by noise legal (E.O. #D-598) NOTE: 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to mechanical properties and corrosion resistance and where some weldability is required. An example of 409 stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust will form in most instances. This rust retards further corrosion. FORD RACING HIGH-PERFORMANCE OIL FILTER M-6731-FL820 (case of 12) • Synthetic-Polymer/Cellulose-Fiber blend media • Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance • High-quality silicone anti-drain back valve • Non-stick sealing gasket for ease of installation and removal • Long life with standard and synthetic motor oils • Up to 50% more filtering capacity than standard filters • Improved filtering efficiency • This technology is only available through Ford Racing Performance Parts 90 MM COLD AIR KIT WITH PREMIUM CAL M-9603-GT06 • • • • • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE Fits 2005-07 Mustang GT manual or automatic transmission. See www.fordracingparts.com for 2008 applications Significant performance gains Premium fuel only Kit includes 90 mm aluminum mass air meter and voucher for Pro-Cal tool with official Ford Racing calibration • Mounts in location of stock airbox • Approximate increase of 20 hp • E.O. #D-598 See www.fordracingparts.com for the most up-to-date warranty information. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 41 2005-08 MUSTANG GT PERFORMANCE PACKS 2006 MUSTANG GT DRAG PACK M-2006-FR2A Automatic Transmission DRAG PACK MUSTANG GT DRAG PACK M-2006-FR2 Manual Transmission If you feel the need for speed, get the Drag Pack from FRPP. This kit harkens back to the days of big block Ford power and provides the modular Mustang engine with that same big block performance. With the Drag Pack, you’ll launch harder and accelerate faster while maintaining factory drivability. Expect to shave 5/10ths off your 1/4-mile ETs with this kit. Drag racing should be conducted at enclosed, dedicated facilities only. • Fits 2005-07 Mustang GT with manual transmission. See www.fordracingparts.com for 2008 applications • Kit includes: 90 mm Cold Air Kit M-9603-GT06 4.10 ratio Ring and Pinion M-4209-G410A Gear Installation Kit M-4210-A Shorty Headers M-9430-S197C Super Short Throw Shifter designed by Ford Racing and Hurst M-7210-T1 Performance Oil Filter • Premium fuel only • Pro-Cal tool with official Ford Racing calibration, sent separately after online registration of Pack • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Reduces 1/4-mile ETs up to 1/2 second • 50-States “Street Legal” (E.O. #D-598) FPO 90 MM COLD AIR KIT WITH PREMIUM CAL M-9603-GT06 • REQUIRES ONLINE REGISTRATION AFTER PURCHASE FOR PRO-CAL TOOL! • Fits 2005-07 Mustang GT manual or automatic transmission. See www.fordracingparts.com for 2008 applications • Significant performance gains • Premium fuel only DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Kit includes 90 mm aluminum mass air meter and voucher for Pro-Cal tool with official Ford Racing calibration • Mounts in location of stock airbox • Approximate increase of 20 hp • E.O. #D-598 See www.fordracingparts.com for the most up-to-date warranty information. MUSTANG 8.8" RING GEAR AND PINION SETS PART NUMBER RATIO M-4209-F373N M-4209-G410A* 3.73:1 4.10:1 2005-07 MUSTANG GT SHORTY HEADERS M-9430-S197* M-9430-S197C* Coated with Jet-Hot® Ceramic Finish • Fits 2005-07 Mustang GT. See www.fordracingparts.com for 2008 applications • 409 stainless steel tubes • Machined flange • Bolts to stock exhaust pipes • Includes gaskets, bolts and studs 42 Techline (800) FORD788 If you feel the need for speed, get the Drag Pack from FRPP. This kit harkens back to the days of big block Ford power and provides the modular Mustang engine with that same big block performance. With the Drag Pack, you’ll launch harder and accelerate faster while maintaining factory drivability. Expect to shave 5/10ths off your 1/4-mile ETs with this kit. Drag racing should be conducted at enclosed, dedicated facilities only. • Fits 2005-07 Mustang GT with automatic transmission. See www.fordracingparts.com for 2008 applications • Kit includes: 90 mm Cold Air Kit M-9603-GT06 3.73 ratio Ring and Pinion M-4209-F373N Gear Installation Kit M-4210-A Shorty Headers M-9430-S197C Performance Oil Filter • Premium fuel only • Pro-Cal tool with official Ford Racing calibration, sent separately after online registration of Pack • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Reduces 1/4-mile ETs up to 1/2 second • 50-States “Street Legal” (E.O. #D-598) FPO FORD RACING HIGH-PERFORMANCE OIL FILTER M-6731-FL820 (case of 12) • Synthetic-Polymer/Cellulose-Fiber blend media • Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance • High-quality silicone anti-drain back valve • Non-stick sealing gasket for ease of installation and removal • Long life with standard and synthetic motor oils • Up to 50% more filtering capacity than standard filters • Improved filtering efficiency • This technology is only available through Ford Racing Performance Parts 2005-08 MUSTANG GT SHORT THROW SHIFTER M-7210-T1 • Designed by Ford Racing and Hurst • Fits 2005-08 Mustang GT with 3650 transmission • Spherical bearing with unique shifter rod and OE main stamping • Comes with stalk for stock shift knob and chrome stalk with white shift knob • Urethane body vibration isolators • 32% reduction in throw • Standard on Shelby GT and GTH See www.fordracingparts.com for the most up-to-date warranty information. 8.8" RING & PINION INSTALLATION KIT M-4210-A • Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts and cover gasket • Use for changing ring and pinion gear or differential • Fits IRS *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2005-08 MUSTANG GT PERFORMANCE PACKS HANDLING PACK 2005-08 MUSTANG GT COUPE HANDLING PACK M-2005-FR3 Put a little “Road Race” into your street car! • Fits 2005-08 Mustang GT Coupe • Handling Pack includes Dampers M-18000-A, Lowering Springs M-5300-K, Sway Bars M-5490-A, and Strut Tower Brace M-20201-S197. Strut Tower Brace does not clear 2007-08 with plastic engine cover • All components are designed to work together as a package • Lowers car approximately 1.5" • Dampers are manufactured by Dynamic Suspensions (the same company that makes dampers for the FR500C race car) • Standard on Shelby GT and GTH NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. FPO See www.fordracingparts.com for the most up-to-date warranty information. 2005-08 MUSTANG GT COUPE LOWERING SPRING KIT M-5300-K 2005-08 MUSTANG GT COUPE ANTI-ROLL BAR KIT M-5490-A • Progressive spring, designed for increased handling and performance • Lowers 2005-08 Mustang GT approximately 1.5" • Use with M-18000-A and M-5490-A for optimum performance NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. • Anti-roll bar kit designed for increased handling and performance on 2005-08 Mustang GT Coupe • Best when used with M-18000-A dampers and M-5300-K springs • Includes all mounting hardware NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2005-08 MUSTANG GT COUPE DYNAMIC DAMPER KIT M-18000-A • Engineered specifically for improved handling on the 2005-08 Mustang Coupe • Dynamic Suspension dampers, same manufacturer as Mustang FR500C race car • Unique FRPP performance tune • Designed specifically for lowered vehicles • Mustang GT Coupe owners: Use with M-5300-K and M-5490-A for optimum performance • Mustang V6 Coupe owners: Use with M-5300-N and M-5490-C for optimum performance NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2005-08 MUSTANG STRUT TOWER BRACE M-20201-S197 • Fits 2005-08 Mustang GT without plastic engine cover • Parallel beam design for added rigidity • Black powder coated • Stainless steel Ford Racing emblem • Does not fit V-6, supercharged GT or 2007-08 GT with intake shroud NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 43 2005-08 MUSTANG 2007-08 SVT MUSTANG WHEEL M-1007-S1895* ➀ 2007-08 SVT MUSTANG WHEEL BLACK M-1007-S1895B* ➀ • Fits 2005-08 Mustang GT and the 2007-08 SVT Mustang • 5-lug, 4.50" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007-08 SVT Mustang • Fits 2005-08 Mustang GT and 2007-08 SVT Mustang • 5-lug, 4.50" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007-08 SVT Mustang except wheel openings are gloss black 2007-08 SVT MUSTANG BLACK WHEEL WITH MACHINED LIP M-1007-S1895B1* ➀ 2005-08 SILVER MUSTANG WHEEL M-1007-S1885* ➀ • • • • • • • • • Fits 2005-08 Mustang GT and 2007-08 SVT Mustang • 5-lug, 4.5" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007-08 SVT Mustang except wheel face is gloss black with a machined lip Fits 2005-08 Mustang GT Silver painted finish Bullit style 5-lug 4.5" bolt circle 6.82" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap 2005-08 BLACK MUSTANG WHEEL M-1007-S1885B* ➀ 2005-08 CHROME MUSTANG WHEEL M-1007-S1885C* ➀ • • • • • • • • • • • • • • Fits 2005-08 Mustang GT Black painted finish 5-lug 4.5" bolt circle 6.82" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap Fits 2005-08 Mustang GT Chrome finish 5-lug 4.5" bolt circle 6.82" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap 2005-08 MUSTANG GT WHEEL M-1007-U1885P* ➀ 2005-08 MUSTANG GT WHEEL M-1007-U1885* ➀ • Optional wheel on 2006-07 Mustang GT • Fits all 2005-08 Mustangs • Polished aluminum finish • 5-lug 4.5" bolt circle • 6.87" backspacing • 50 mm offset • 18" x 8.5" wide • Includes Mustang center cap • • • • • • • NOTE: ➀ For vehicles with 16" wheels from the factory: - installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA 44 Techline (800) FORD788 Fits all 2005-08 Mustangs Silver sparkle finish 5-lug, 4.5" bolt circle 6.87" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap For vehicles with 17" wheels from the factory: - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2005-08 MUSTANG BULLITT SPECIAL EDITION WHEEL BLACK FINISH M-1007-T178B* ➀ • • • • • • Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap 2005-08 SILVER MUSTANG GT WHEEL M-1007-T178S* ➀ • • • • • • Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap 2005-08 POLISHED MUSTANG GT WHEEL M-1007-T178P* ➀ 2005-08 CHROME MUSTANG GT WHEEL M-1007-T178C* ➀ • • • • • • • • • • • • Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap MUSTANG GT INTAKE SHROUD M-6949-3V • Original equipment on 2007-08 Mustang GT • Fits all 2005 and up Mustang GT's with 3-valve 4.6L engine • May require 2007 Mustang throttle body studs (W712289 S437) and nuts (W520411 S437) from Ford Dealer • Will not fit with Ford Racing strut tower brace M-20201-S197 Fits 2005-08 Mustang GT 5-lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap FORD GT START BUTTON KIT FOR MUSTANG M-11572-GT Easy upgrade to enhance the appearance of your 2005-08 Mustang • Fits in the existing Power Point located in the center of the dash • Turn the key to the on position then press the button • Red illumination only 2005-08 MUSTANG GT AXLE KIT M-4001-A355* • 2005-08 Mustang GT 8.8 axle assembly • 31 spline axles and Trac-Lok differential • 3.55 gear ratio • Includes axle shafts NOTE: ➀ For vehicles with 16" wheels from the factory: - installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA For vehicles with 17" wheels from the factory: - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 45 2005-08 MUSTANG 2005-08 MUSTANG GT EXHAUST KIT M-5230-5GT* 2005-08 MUSTANG GT MUFFLER SET M-5230-GTA • T-304 stainless construction • Louder, throatier exhaust note • 49-state drive-by noise legal (not legal in CA) • Includes mufflers with Ford Racing embossed 3.5" exhaust tips • 409 stainless body with highly polished 4.0" diameter tips • Louder, throatier exhaust note • 50-States drive-by noise legal (E.O. #D-598) NOTE: 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to mechanical properties and corrosion resistance and where some weldability is required. An example of 409 stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust will form in most instances. This rust retards further corrosion. 2005-08 MUSTANG GT X-PIPE M-5251-R* CNC PORTED 3-VALVE CYLINDER HEAD ASSEMBLY M-6049-463P* RH M-6050-463P* LH • T-409 stainless steel X-pipe • Converts your factory H-pipe to a more efficient X-pipe • Requires cutting of factory exhaust for installation • Clamp-on installation—does not require welding! • • • • • • New production cylinder head casting 50.3 cc combustion chamber CNC ported to increase flow and performance Intake flow increased approximately 20% Exhaust flow increased approximately 30% Assembled with production springs, valves, retainers, locks and seals • Does not include camshaft, followers and hydraulic lash adjusters • Minimize your vehicle down time waiting for a shop to port your heads. Get a brand new head for about the same price as exchange • No exchange required COATED 3-VALVE CAM COVERS 4.6/5.4L • Fits all 2005-08 3-valve 4.6/5.4L engines • Powdercoated for durable finish M-6582-C543V M-6582-3VB M-6582-3VBLK M-6582-3VS Chrome appearance Blue Black Wrinkle Silver MODULAR 3-VALVE HEAT RANGE ZERO SPARK PLUG M-12405-3V0* MUSTANG GT DUAL FUEL PUMP KIT M-9407-GT05 • For use in engines with higher than stock cylinder combustion pressures • Unique design is proprietary to Ford 3-valve engines • Only available through Ford Racing • One heat range colder than the stock Mustang GT plug • Two heat ranges colder than the stock 5.4L truck 3-valve engine • Sold in engine sets of 8 • Fits 2005-08 Mustang GT • Includes harness, dual fuel pumps, drop-in housing and fuel pump driver module from the 2007-08 SVT Mustang • Includes all installation hardware • Highly recommended for any application making over 400 hp • Same fuel pump kit as used in the Mustang GT 500 hp supercharger kit 46 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 14" BRAKE UPGRADE KIT 2005-08 MUSTANG GT M-2300-S* • Fits 2005-08 Mustang GT • Kit will upgrade the front brakes to 2007-08 SVT Mustang 14" rotors and 4-piston calipers • Includes 2007 SVT Mustang rear pads for use in stock Mustang GT rear calipers • Includes Goodridge DOT four-piece hose kit and attaching parts • Requires 18" M-1007-S1895, M-1007-S1895B wheel or equivalent for caliper clearance BRAKE COOLING KIT M-2004-A • Fits 2007-08 SVT Mustang • Fits 2005-08 Mustang GT with M-2300-S brake kit installed • Includes backing plates with duct work • Designed to direct air from the fascia to the rotor for improved brake and wheel bearing life 2005-08 MUSTANG FRONT LOWER A-ARM BRACE M-5025-A • Fits 2005-08 Mustang GT coupe • Original equipment on convertible and 2007 SVT Mustang • Increases chassis stiffness MUSTANG FR500C REAR LOWER CONTROL ARMS M-5649-R • Service replacement for the Mustang FR500C race car • Higher durometer bushing enhances response of vehicle • Will fit 2005-08 Mustang GT NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2007-08 SVT MUSTANG REAR LOWER CONTROL ARMS M-5538-A • Fits 2005-08 Mustang • Original equipment on 2007-08 SVT Mustang • Increased bushing durometer and stiffness for higher horsepower applications NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. MUSTANG FR500C REAR UPPER CONTROL ARM BUSHINGS M-5638-R • Fits 2005-08 Mustang GT rear suspension • Service replacement for the Mustang FR500C race car • Includes bushings and sleeve for upper rear control arm • Increased durometer bushing for precise handling and control NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. MUSTANG FRONT LOWER CONTROL ARM KIT M-3075-E • • • • Fits 2005-08 Mustang Original equipment on 2007-08 SVT Mustang Increased strength ball joints Kit contains 1 RH and 1 LH lower control arm assembly NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2005-08 MUSTANG GT AND 2007-08 SVT MUSTANG TWO-PIECE DRIVESHAFT LOOP KIT M-5478-S197 • Bolts to floor pan 2005-08 Mustang GT and 2007-08 SVT Mustang • Must drill holes for installation • Zinc plated • Includes hardware • Includes front and rear loops for production two-piece driveshaft *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 47 2005-08 MUSTANG 2005-08 FORD RACING MUSTANG STRIPE KITS M-1620001-FRBL Ford Racing Blue M-1620001-FRBK Ford Racing Black M-1620001-FRSL Ford Racing Silver • • • • • As seen on Mustang FR500C race car 10" stripe width for over-the-body stripes Vintage look rocker molding stripes Ford Racing script in lower body side stripes (as pictured above) Professional installation required! MUSTANG GT STYLING PACK M-2784-M • Fits 2005-08 Mustang GT • Includes flat black front chin spoiler and rear decklid trim panel • Chin spoiler is texture finished—not intended for paint • Deck lid trim panel features horizontal ribs and FR500 badge • No drilling required • Not compatible with faux fuel door, must be removed 2005-08 MUSTANG C-PILLAR LOUVERS M-1784-MS MUSTANG FUEL FILL DOOR M-2301-5M • • • • • • • Improve the appearance of your 2005-08 Mustang • Brushed aluminum finish • Billet aircraft styling • Easy installation 48 Fits 2005-08 Mustangs Urethane construction Primed for paint, MUST PAINT TO MATCH Comes with installation instructions Requires no drilling Use with M-2784-M to make your Mustang like the FR500! Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2007-08 SVT MUSTANG “COBRA” FENDER EMBLEMS M-1447-C FORD GT COOLANT OVERFLOW CAP M-8006-GT • Original equipment on 2007-08 SVT Mustang • Includes right and left side emblems • 4.25" tall by 2.50" wide • Ford GT coolant overflow cap with billet cover • “GT” logo machined in cap surface • Fits both coolant overflow and intercooler reservoir “COBRA” SNAKE FAUX FUEL DOOR M-2301-S • • • • Fits 2005-08 Mustang Features the Cobra Snake Two-way tape for easy installation Unique Ford Racing offering BILLET PAINTED OIL FILL CAP COVER FOR 4.6/5.4/6.8L M-6766-MP46 • Fits all years modular engine • Installs over factory plastic oil fill cap (not included) • Features Ford Racing logo painted in blue and red • Clear coated 2005-08 MUSTANG LIGHTED SVT SILL PLATES M-13208-LSVT 2005-08 MUSTANG LIGHTED FORD RACING SILL PLATES M-13208-LFR • Fits 2005-08 Mustangs • Improves appearance and protects vehicle entry area • Black with brushed stainless steel insert with “SVT” logo • SVT illuminates red • Kit includes two guards, installation tape and instructions • • • • 2007-08 SVT MUSTANG ENTRY SILL PLATES M-13208-C 2005-08 MUSTANG ENTRY SILL PLATES M-13208-M100 • • • • • • Fits 2005-08 Mustang Original Equipment on 2007-08 SVT Mustang Improves appearance and protects vehicle entry area Black with brushed stainless steel insert Kit includes left and right entry guards Two-way tape for easy installation Fits 2005-08 Mustangs Improves appearance and protects vehicle entry area Black with brushed stainless steel insert with “Ford Racing” logo Ford illuminates blue, Racing illuminates red • Kit includes two guards, installation tape and instructions • • • • • *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. Fits 2005-08 Mustang Improves appearance while protecting vehicle entry area Made of stainless steel with the Ford Racing logo Sill plates are not scratch-resistant Kit includes two guards, installation tape and instructions www.fordracingparts.com 49 2005-08 V6 MUSTANG PERFORMANCE PACKS V6 POWER UPGRADE PACKAGES For drivers who want to power up and still maintain mild street manners, the Power Upgrade Package offers a slightly throatier exhaust note and a new mass air meter with calibration. The result is approximately 10 horsepower! With the Power Upgrade Package’s easy bolt-ons, it takes just an afternoon in the driveway to install. The Power Upgrade Package includes the Ford Racing Flash Tuner to ensure proper calibration. 2005-07 MUSTANG POWER UPGRADE PACKAGE M-2007-FR1V6 • Fits 2005-07 Mustang with 5-speed manual or automatic transmission. See www.fordracingparts.com for 2008 applications. • Kit includes: 85 mm Cold Air Kit M-9603-V605 Muffler Kit M-5230-V6 Performance Oil Filter • Premium fuel only • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Approximate increase of 10 horsepower at the rear wheels • 50-States street legal (E.O. # pending) See www.fordracingparts.com for the most up-to-date warranty information. 2005-08 MUSTANG V6 DUAL EXHAUST KIT 50 STATE M-5230-V6 • Fits 2005-08 V-6 Mustang • 409 stainless body mufflers with highly polished 4.0" diameter tips • Louder, "throatier" exhaust note • Includes X-pipe • Requires minor modification of rear bumper cover • 50-States drive-by noise legal (E.O. #D-598) See www.fordracingparts.com for the most up-to-date warranty information. Note: 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to mechanical properties and corrosion resistance and where some weldability is required. An example of 409 stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust will form in most instances. This rust retards further corrosion FPO FORD RACING HIGH-PERFORMANCE OIL FILTER M-6731-FL820 (case of 12) • Synthetic-Polymer/Cellulose-Fiber blend media • Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance • High-quality silicone anti-drain back valve • Non-stick sealing gasket for ease of installation and removal • Long life with standard and synthetic motor oils • Up to 50% more filtering capacity than standard filters • Improved filtering efficiency • This technology is only available through Ford Racing Performance Parts 2005-07 85 MM COLD AIR KIT WITH PREMIUM CAL M-9603-V605 • Fits 2005-07 Mustang V6 manual or automatic transmission. See www.fordracingparts.com for 2008 applications • Significant performance gains • Premium fuel only • Kit includes 85 mm aluminum mass air meter • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Mounts in location of stock airbox • E.O. # pending See www.fordracingparts.com for the most up-to-date warranty information. 2005-08 MUSTANG V6 MUFFLER KIT M-5230-5V6* • • • • 50 T-304 stainless construction Louder, "throatier" exhaust note 50-States drive-by noise legal Includes muffler with Ford Racing embossed 3.5" exhaust tip Techline (800) FORD788 2005-08 V6 SHORT THROW SHIFTER M-7210-V • • • • • • Designed by Ford Racing and Hurst Fits 2005-08 Mustang V6 with T-5 transmission Spherical bearing with unique shifter rod and OE main stamping Chrome stalk with white shift knob Urethane body vibration isolators Reduced throw See www.fordracingparts.com for the most up-to-date warranty information. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2005-08 V6 MUSTANG PERFORMANCE PACKS V6 HANDLING PACK 2005-08 MUSTANG V6 COUPE HANDLING PACK M-2007-FR3V6 • Fits 2005-08 Mustang V6 Coupe • Handling Pack includes dampers (M-18000-A), lowering springs (M-5300-N), anti-roll bar kit (M-5490-C) and strut tower brace (M-20201-F) • All components are designed to work together as a package • Lowers car approximately 1.250" • Dampers are manufactured by Dynamic Suspensions (the same company that makes dampers for the FR500C race car) NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. FPO See www.fordracingparts.com for the most up-to-date warranty information. 2005-08 MUSTANG V6 COUPE SPRINGS M-5300-N 2005-08 MUSTANG V6 COUPE ANTI-ROLL BAR KIT M-5490-C • Engineered specifically for improved handling on the 2005-08 V6 Mustang Coupe • Lowers car approximately 1.5" • Designed to be used with M-18000-A and M-5490-C • Gives a more aggressive looking stance as well as increased handling dynamics • May cause slightly harsher ride compared to stock springs NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. • Anti-roll bar kit designed for increased handling and performance on the 2005-08 V6 Mustang Coupe • Best when used with M-5300-N springs • Includes all mouting hardware NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2005-08 MUSTANG COUPE DYNAMIC DAMPER KIT M-18000-A 2005-08 MUSTANG V6 STRUT TOWER BRACE M-20201-F • Engineered specifically for improved handling on the 2005-08 Mustang Coupe • Dynamic Suspension dampers, same manufacturer as Mustang FR500C race car • Unique FRPP performance tune • Designed specifically for lowered vehicles • Mustang GT Coupe owners: Use with M-5300-K and M-5490-A for optimum performance • Mustang V6 Coupe owners: Use with M-5300-N and M-5490-C for optimum performance NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. • Fits the 2005-08 Mustang V6 • Parallel beam construction for added rigidity NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 51 KIT CARS 5.8L/351-392 CID SMALL BLOCK 475 HP “Z” ALUMINUM HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-C392RT* • 392 cubic inch • 475 hp @ 5600 rpm (with headers and 750 CFM Holley carburetor, not included) • 495 lb-ft of torque @ 4400 rpm • 10.0:1 compression ratio (nominal) • Forged steel crankshaft and forged aluminum pistons • Ford Racing aluminum “Z” cylinder heads M-6049-Z304DA. Raised exhaust port may require custom headers • Ford Racing high-performance hydraulic roller camshaft and roller rocker arms • Single plane “Victor Jr.” intake manifold • New heavy-duty 351W Sportsman block, oil and water pumps and a high-performance harmonic damper • 7-quart performance oil pan fits 1979 and later Fox-bodied cars • Billet distributor • Great engine for serious performance applications 2003-04 COBRA PINION FLANGE M-4851-B • Original equipment on 2003-04 Mustang Cobra • Designed for use with 1350 U-joint flange • 4.25" bolt circle • Fits all 8.8" rear drive pinions 8.8" IRS HOUSING KIT M-4010-A88 • Aluminum IRS differential housing, rear cover, rear cover bolts, oil slinger and vent tube • Does not include gear set, gear installation kit or IRS compatible differential • Original equipment on 1989-97 T-Bird, 1993-98 MK-VIII, 1999-04 Mustang Cobra with 8.8" KIT CAR IRS HUB M-1109-A • 5 x 4.5" bolt circle, 2.775" wheel pilot hub for popular Mustang size wheels • Should be used with IRS knuckle M-5970-A • Original equipment on 1999-04 Mustang Cobra KIT CAR IRS BEARING M-1215-A KIT CAR IRS KNUCKLE SET M-5970-A • Knuckles for use in kit car IRS systems • Hub not included! Use with M-1109-A. Sold separately • Includes M-1215-A • Original equipment on 1989-97 Thunderbird and 1993-98 Mark VIII • For use with kit car IRS hub M-1109-A • Original equipment on 1993-98 Mark VIII, 1989-97 Thunderbird and 1999-04 Cobra 52 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. STREET RODS 5.0L/302 – 340HP GT-40 ALUMINUM HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-XEFM* E303 Camshaft – Automatic or Manual Transmission • • • • • • • • • • • • • • 302 cubic inch 340 hp @ 5500 rpm 9.0:1 compression ratio (nominal) Forged pistons Forged steel connecting rods Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake and exhaust Double roller timing chain set M-6268-A302 Nodular iron crankshaft Rear sump pan fits most Fox body cars Ford Racing aluminum GT-40 cylinder heads M-6049-X303 with 1.94" intake valves and 1.54" exhaust valves Roller rocker arms M-6564-B351 New block, oil and water pumps, oil pan, flywheel and harmonic balancer Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes STREET ROD GUAGE SET M-19017-B961 • See page 178 for details OIL FILTER ADAPTER M-6880-A50 • Screws into block and rotates filter toward front of engine to provide clearance for engine swaps and chassis modifications • Fits most Ford engines that use Motorcraft FL-1A or Ford Racing M-6371-FL1A oil filter *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 53 PERFORMANCE WHEELS “PUT A FORD ON YOUR FORD” FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) standards: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrome testing. These standards define a series of tests that ensure the safety and finish of a wheel. THESE TESTS ARE THE MINIMUM STANDARD USED TO DEFINE THE ENDURANCE OF FRPP WHEELS. IMPACT TESTING This test simulates a curb impact on the side of a tire/wheel assembly. During testing, a tire/wheel assembly is mounted at a 13-degree angle to a test fixture by the hub. A weight is dropped from 9 inches onto the assembly at the tire/wheel intersection. The mass of the weight is determined by a formula, using the vehicle weight. DYNAMIC CORNERING FATIGUE TESTING This test simulates lateral loads applied to a wheel by the vehicle. During testing, a wheel is clamped to a fixture by the front face and a constant bending moment is applied through the hub. A wheel of new design will run a minimum of 1,000,000 cycles before approved. The load applied is determined by a formula, using the vehicle weight. DYNAMIC RADIAL FATIGUE TESTING This test simulates axial loads applied to a wheel by the vehicle. During testing, a tire/wheel assembly is mounted to an axle by the hub. A large drum drives the assembly while a load is applied perpendicular to the tire patch. A wheel of new design will run a minimum of 5,000,000 cycles. The load applied is determined by a formula, using the vehicle weight. CHROME QUALITY TESTING Copper-accelerated acetic acid-salt spray, commonly known as CASS testing, is the standard method used to test the corrosive performance of copper/nickel/chromium-plated wheels. The test is performed in a sealed chamber with a highly acetic spray directed onto the wheel for a predetermined amount of time, usually 66 hours. CHECK OUT THE FORD RACING WHEEL CHANGER AT FORDRACINGPARTS.COM. SEE HOW OUR WHEELS LOOK ON YOUR RIDE. 54 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PERFORMANCE WHEELS 2007-08 SVT MUSTANG WHEEL M-1007-S1895* ➀ 2007-08 SVT MUSTANG WHEEL BLACK M-1007-S1895B* ➀ • Fits 2005-08 Mustang GT • Original equipment on the 2007-08 SVT Mustang • 5-lug, 4.5" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Fits 2005-08 Mustang GT and 2007-08 SVT Mustang • 5-lug, 4.5" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007-08 SVT Mustang except wheel openings are gloss black 2007-08 SVT MUSTANG BLACK WHEEL WITH MACHINED LIP M-1007-S1895B1* ➀ 2005-08 BLACK MUSTANG WHEEL M-1007-S1885B* ➀ • Fits 2005-08 Mustang GT and 2007-08 SVT Mustang • 5-lug, 4.5" bolt circle • 7.125" backspacing • 45 mm offset • 18" x 9.5" wide • Includes SVT center cap • Same as production 2007-08 SVT Mustang except wheel face is gloss black with a machined lip • • • • • • • Fits 2005-08 Mustang GT Black painted finish 5-lug 4.5" bolt circle 6.82" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap 2005-08 CHROME MUSTANG WHEEL M-1007-S1885C* ➀ 2005-08 SILVER MUSTANG WHEEL M-1007-S1885* ➀ • • • • • • • • • • • • • • • Fits 2005-08 Mustang GT Chrome finish 5-lug 4.5" bolt circle 6.82" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap NOTE: ➀ For vehicles with 16" wheels from the factory: - installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA Fits 2005-08 Mustang GT Silver painted finish Bullit style 5-lug 4.5" bolt circle 6.82" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap For vehicles with 17" wheels from the factory: - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 55 PERFORMANCE WHEELS 2005-07 MUSTANG GT WHEEL M-1007-U1885P* ➀ 2005 MUSTANG SPECIAL EDITION BLACK FINISH WHEEL M-1007-T178B* ➀ • • • • • • • • • • • • • • Optional wheel on 2006-07 Mustang GT Fits all 2005-08 Mustangs Polished aluminum finish 5-lug 4.5" bolt circle 6.87" backspacing 50 mm offset 18" x 8.5" wide Includes Mustang center cap Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap 2005 SILVER MUSTANG GT WHEEL M-1007-T178S* ➀ 2005 POLISHED MUSTANG GT WHEEL M-1007-T178P* ➀ • • • • • • • • • • • • Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap 2005 CHROME MUSTANG GT WHEEL M-1007-T178C* ➀ • • • • • • Fits 2005-08 Mustang GT 5-Lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap MUSTANG SPINNER CAP M-1096-B Fits 2005-07: 16" aluminum, 17" base GT wheels. Fits 2005-08 Mustang GT 5-lug 4.5" bolt circle 6.295" backspacing 45 mm offset 17" x 8" wide Includes center cap NOTE: ➀ For vehicles with 16" wheels from the factory: - installing 17" x 8" wheels, use steering stop 4R3Z-3932-BA - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA For vehicles with 17" wheels from the factory: - installing 18" x 8.5" or 18" x 9.5" wheels, use steering stop 6R3Z-3932-CA Check out the Ford Racing Wheel Changer at fordracingparts.com. See how our wheels look on your ride. 56 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PERFORMANCE WHEELS 2003 SILVER MUSTANG COBRA WHEEL M-1007-S179* 2003 CHROME MUSTANG COBRA WHEEL M-1007-S179C* • • • • • • • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 6.12" backspacing 26 mm offset 17" x 9" wide Includes center cap Fits 1994-04 5-lug, 4.5" bolt circle 6.12" backspacing 26 mm offset 17" x 9" wide Includes center cap 10TH ANNIVERSARY MUSTANG COBRA WHEEL M-1007-A179* 1999 POLISHED MUSTANG COBRA WHEEL M-1007-G178* • • • • • • • • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 6.12" backspacing 26 mm offset 17" x 9" wide Charcoal metallic finish Includes center cap Fits 1994-04 5-lug, 4.5" bolt circle 5.72" backspacing 30 mm offset 17" x 8" wide Includes center cap 1995 SILVER MUSTANG COBRA “R” WHEEL M-1007-R58* CHROME MUSTANG COBRA “R” WHEEL M-1007-C58* • • • • • • • • • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 5.98" backspacing 24 mm offset 17" x 9" wide Includes center cap Will clear M-2300-K disc brakes • Same wheel used on 1995 SVT Mustang Cobra “R” Fits 1994-04 5-lug, 4.5" bolt circle 5.98" backspacing 24 mm offset 17" x 9" wide Includes center cap Will clear M-2300-K disc brakes Check out the Ford Racing Wheel Changer at fordracingparts.com. See how our wheels look on your ride. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 57 PERFORMANCE WHEELS 2003 CHARCOAL GRAY SPECIAL EDITION MUSTANG GT WHEEL M-1007-J178* • Fits 1994-04 • 5-lug, 4.5" bolt circle • 5.72" backspacing • 30 mm offset • 17" x 8" wide • Includes center cap NOTE: Charcoal gray does not match 2001-02 production Mustang 2001 CHROME SPECIAL EDITION MUSTANG GT WHEEL M-1007-B178C* • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 5.72" backspacing 30 mm offset 17" x 8" wide Includes center cap 2001 BLACK SPECIAL EDITION MUSTANG GT WHEEL M-1007-K178* 1998 SILVER MUSTANG COBRA WHEEL M-1007-D178* • • • • • • • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 5.72" backspacing 30 mm offset 17" x 8" wide Includes center cap 1996 CHROME MUSTANG COBRA WHEEL M-1007-C178* • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 5.72" backspacing 30 mm offset 17" x 8" wide Includes center cap Fits 1994-04 5-lug, 4.5" bolt circle 5.72" backspacing 30 mm offset 17" x 8" wide Includes center cap 2003 MACH 1 MAGNUM 500 MUSTANG WHEEL M-1007-M178* • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 5.72" backspacing 30 mm offset 17" x 8" wide Includes center cap Check out the Ford Racing Wheel Changer at fordracingparts.com. See how our wheels look on your ride. 58 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PERFORMANCE WHEELS 2000 SILVER MUSTANG COBRA “R” WHEEL M-1007-R189* 2000 CHROME MUSTANG COBRA “R” WHEEL M-1007-R189C* • • • • • • • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 6.12" backspacing 20 mm offset 18" x 9.5" wide Includes center cap Fits 1994-04 5-lug, 4.5" bolt circle 6.12" backspacing 20 mm offset 18" x 9.5" wide Includes center cap SILVER FORD RACING MUSTANG COBRA “R” WHEEL M-1007-R54* CHROME FORD RACING MUSTANG COBRA “R” WHEEL M-1007-R54C* • • • • • • • • • • • • Fits 1979-93 4-lug, 4.25" bolt circle 5.15" backspacing 15 mm offset 17" x 8" wide Includes center cap Fits 1979-93 4-lug, 4.25" bolt circle 5.15" backspacing 15 mm offset 17" x 8" wide Includes center cap SILVER PONY MUSTANG WHEEL M-1007-N167* CHROME PONY MUSTANG WHEEL M-1007-M167* • • • • • • • • • • • • Fits 1979-93 4-lug, 4.25" bolt circle 4.87" backspacing 22 mm offset 16" x 7" wide Includes center cap Fits 1979-93 4-lug, 4.25" bolt circle 4.87" backspacing 22 mm offset 16" x 7" wide Includes center cap Check out the Ford Racing Wheel Changer at fordracingparts.com. See how our wheels look on your ride. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 59 PERFORMANCE WHEELS SILVER FORD RACING MUSTANG WHEEL M-1007-F500* CHROME FORD RACING MUSTANG WHEEL M-1007-F500C* • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 5.98" backspacing 24 mm offset 18" x 9" wide Includes Ford Racing center cap • Cast-in Ford Racing logo • • • • • • BLACK FORD RACING MUSTANG WHEEL M-1007-F500B* F-250 HARLEY-DAVIDSON WHEEL M-1007-A208* • • • • • • Fits 1994-04 5-lug, 4.5" bolt circle 5.98" backspacing 24 mm offset 18" x 9" wide Includes Ford Racing center cap • Cast in Ford Racing logo 60 Techline (800) FORD788 Fits 1994-04 5-lug, 4.5" bolt circle 5.98" backspacing 24 mm offset 18" x 9" wide Includes Ford Racing center cap • Cast-in Ford Racing logo • Fits all 2005 F-250/F-350 non dual wheel 4X2 trucks • 8 Lug, 170mm bolt circle • 5.80" backspacing • 40 mm offset • 20" x 8" wide • Includes center cap • Fits 2005 F-250/F-350 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PERFORMANCE WHEELS FORD GT FRONT WHEEL M-1007-GTF* 2004-08 F-150 LIGHTNING WHEEL M-1007-L2010* • Forged front wheel available on 2005-06 Ford GT • Open lug design • 5-lug, 4.5" bolt circle • 6.90" backspacing • 50 mm offset • 18" x 9" wide • Includes Ford GT center cap • Ford Racing exclusive • Proposed wheel for the never produced Lightning • Fits all 2004-08 F-150 4WD only • Does not fit 2004 F-150 Heritage • Sparkle silver painted finish, with machined face • 6-lug, 135 mm bolt circle • 7.125" backspacing • 44 mm offset • 20" x 10" wide • Includes Ford Racing center cap FORD GT REAR WHEEL M-1007-GTR* 2004-08 F-150 LIGHTNING WHEEL M-1007-L2010P* • Forged rear wheel available on 2005-06 Ford GT • Open lug design • 5-lug, 4.5" bolt circle • 7.295" backspacing • 40 mm offset • 19" x 11.5" wide • Includes Ford GT center cap • Ford Racing exclusive • Proposed wheel for the never produced Lightning • Fits all 2004-08 F-150 4WD only • Does not fit 2004 F-150 Heritage • Polished aluminum finish, with machined face • 6-lug, 135 mm bolt circle • 7.125" backspacing • 44 mm offset • 20" x 10" wide • Includes Ford Racing center cap 2004-08 F-150 LIGHTNING WHEEL M-1007-L2085* 2004-08 F-150 LIGHTNING WHEEL M-1007-L2085P* • Ford Racing exclusive. Styled after the proposed wheel for the never produced Lightning • Fits all 2004-08 F-150 2WD and 4WD • Fits 2002-08 Expeditions • Does not fit 2004 F-150 Heritage • Sparkle silver painted finish, with machined face • 6-lug, 135 mm bolt circle • 6.56" backspacing • 44 mm offset • 20" x 8.5" wide • Includes Ford Racing center cap • Ford Racing exclusive. Styled after the proposed wheel for the never produced Lightning • Fits all 2004-08 F-150 2WD and 4WD • Fits 2002-08 Expeditions • Does not fit 2004 F-150 Heritage • Polished aluminum finish, with machined face • 6-lug, 135 mm bolt circle • 6.56" backspacing • 44 mm offset • 20" x 8.5" wide • Includes Ford Racing center cap *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 61 PERFORMANCE WHEELS 2002-03 SILVER SVT FOCUS WHEEL M-1007-S177* • • • • • • • Fits 2000-08 4-lug, 108 mm bolt circle 5.94" backspacing 49 mm offset 17" x 7" wide Includes SVT center cap Original equipment on the 2003 SVT Focus 2003 DARK ARGENT SVT FOCUS EUROPEAN APPEARANCE PACKAGE 15-SPOKE WHEEL M-1007-S177E* • • • • • • • Fits 2000-08 4-lug, 108 mm bolt circle 5.94" backspacing 49 mm offset 17" x 7" wide Includes SVT center cap Original equipment on the 2003 SVT Focus 2004 SVT FOCUS WHEEL M-1007-S177A* • • • • • • • Fits 2000-08 4-lug, 108 mm bolt circle 5.94" backspacing 49 mm offset 17" x 7" wide Includes SVT center cap Original equipment on the 2003-04 SVT Focus FORD RACING FOCUS RALLY WHEEL M-1007-S177B* • • • • • • Fits 2000-08 4-lug, 108 mm bolt circle 5.94" backspacing 49 mm offset 17" x 7" wide Includes Ford Racing center cap • Same as M-1007-S177E except painted black MCGARD® LOCKING LUG NUT KIT M-1012-K TIRE INFLATOR KIT M-19543-C • • • • • • Get back on the road without having to jack up the car • Less weight than a spare tire • Consists of an air compressor and sealing compound • Seals punctures smaller than 1/4" • Seal is temporary. 120 miles at maximum speed of 50 mph • Standard equipment in the 2007-08 SVT Mustang (16) 1/2"-20 thread chrome cone seat lug nuts (4) chrome locking lugs (4) chrome valve stems, pull-through style Uses 13/16" lug wrench (not included) Fits most wheel applications same as Lug Nut Kit M-1012-A listed in chart on page 63 Check out the Ford Racing Wheel Changer at fordracingparts.com. See how our wheels look on your ride. 62 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. FORD RACING LUG NUTS AND CENTER CAPS AS DELIVERED X OPTIONS 0 M-1096-W O M-1096-N O M-1096-M M-1096-H M-1096-FR1 M-1096-FR M-1096-CA M-1096-D O M-1096-K X X X O O O X X X X X X M-1096-B O M-1096-J M-1007-A179 M-1007-A208 M-1007-B178C M-1007-C178 M-1007-C58 M-1007-D178 M-1007-F1810 M-1007-F500 M-1007-F500B M-1007-F500C M-1007-G178 M-1007-GTF M-1007-GTR M-1007-J178 M-1007-K178 M-1007-L2010 M-1007-L2010P M-1007-L2085 M-1007-L2085P M-1007-M167 M-1007-M178 M-1007-N167 M-1007-R189 M-1007-R54 M-1007-R54C M-1007-R58 M-1007-R189 M-1007-R189C M-1007-S177 M-1007-S177A M-1007-S177B M-1007-S177E M-1007-S179 M-1007-S179C M-1007-S1885 M-1007-S1885B M-1007-S1885C M-1007-S1895 M-1007-S1895B M-1007-S1895B1 M-1007-T178B M-1007-T178C M-1007-T178P M-1007-T178S M-1007-U1885 M-1007-U1885P LUG NUTS X X O O O X O X X O O O O O O O O O X X X O O O O O O O O O O O O O O O O O X X O O O O O X O X O X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O X X O O O X X X X X O O O O O O O M-1096-A M-1096-D O O O O O O X X X M-1096-N M-1096-CA LUG NUT PART NUMBER M-1012-A NA M-1012-A M-1012-A M-1012-A M-1012-A NA M-1012-A M-1012-A M-1012-A M-1012-A NA NA M-1012-A M-1012-A NA NA NA NA M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A NA NA NA NA M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1012-A M-1096-J M-1096-H *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PERFORMANCE WHEELS WHEEL PART NUMBER M-1096-A CENTER CAPS M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1096-FR M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1096-FR1 M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1012-K M-1096-K M-1096-M M-1096-B www.fordracingparts.com 63 CRATE ENGINES CRATE ENGINE BUILD-UP At Ford Motor Company, “Quality is Job 1” and that extends to every facet of the business, including crate engines from Ford Racing Performance Parts (FRPP). Ford Racing crate engines are built with quality components, undergo rigorous testing both on a dyno and at the track and are assembled to exacting tolerances. FRPP crate engines begin with many new components, including rods and pistons, cylinder heads and the finest gaskets and seals available. Only after everything is assembled to Ford’s strict standards do the FRPP crate engines earn the right to wear the Ford Oval. To help illustrate FRPP’s commitment to excellence, we walked through and photographed the crate engine assembly line to showcase some of the many steps that FRPP engines go through to ensure that customers receive one of the highest quality crate engines on the market. Crankshafts are checked for proper journal dimensions, as well as run-out, taper and rotational eccentricity. After the crank is polished, the surface is checked to make sure that it meets or exceeds FRPP requirements. The crate engine building process employs the very latest computer-controlled boring equipment. 64 Block decks are machined to ensure even height and parallelism, then the RA of the finished surface is checked. Techline (800) FORD788 See pages 2-8 for important safety, emissions and warranty information. Finish-honing is done by a computer-controlled cylinder hone using diamond stones; the final step is plateau honing. CRATE ENGINES Every piston gets measured and weighed before they are put together in matched sets using strict tolerances. To ensure accuracy, computerized checks of every 5th camshaft are done. To ensure accuracy of compression ratios of the sealed crate engines (M-6007-D347SR/M-6007-Z351SR), combustion chamber volumes are checked and corrected, if necessary, to achieve proper specifications. Connecting rods are inspected to make sure they meet specifications. The bearing bore is studied for taper, bore size and roundness. Then, weight is checked at the big and small end of the connecting rod and sets are weight-matched. After engines are completely assembled, they are hot-tested (except M-6007XEFM, -X302B, -X302E, -Z50Z) to check oil pressure and detect water leaks. The completed engines are run for approximately 20 minutes during this process. THE PROCEDURES HIGHLIGHTED ABOVE SERVE TO ILLUSTRATE THE RIGOROUS CONTROLS THAT GO INTO BUILDING FRPP’S HIGH-QUALITY PUSHROD CRATE ENGINES. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 65 CRATE ENGINES “CAMMER” ENGINE “CAMMER” ENGINE Not long ago, the term “dual over-head cam engine” was reserved for the high-tech racing community. Although the DOHC technology employed in mainstream production engines is almost commonplace today, the technical procedures to machine and assemble a modern DOHC engine are rather complex. A CNC machine is used to bore the cylinders on center, deck the block and chamfer the tops of the cylinder bores. Compared to the Windsor-based Ford V-8 engine family, the modular four-valve engines require greater attention to detail regarding machining, torque sequences and number of fasteners (i.e., the overall complexity of the assembly process itself). The following photographs offer an inside look at the build of a 4.6-liter dual overhead cam V-8 down the same line as the Aluminator. Finish-honing of the cylinder bores is accomplished via a Gehring CNC hone. After honing, all cylinder bores are inspected for concentricity and final finish. Cylinder heads are checked with 27.5 inches of vacuum to ensure the integrity of valve sealing. 66 The main bearing cap bolts are torqued down to spec by an automated torquing machine. Techline (800) FORD788 See pages 2-8 for important safety, emissions and warranty information. After the short block is completed, the rotating effort is checked to verify proper assembly tolerances. Spin-testing facilitates checking for compression, oil pressure, oil flow and effort to turn the long-block assembly. CRATE ENGINES Vacuum is also applied to the crankcase to check for any air leaks. Engine oil has a dye added to it that shows up under black light to reduce the possibility of undetected leaks. Long-block coolant passages are air-pressure checked to make sure there are no leaks in the block, heads or gaskets. As a final step, engine assemblies are run for 20 minutes to inspect for oil and water leaks and to check oil pressure. The Ford Racing Performance Parts Aluminator motor is the ultimate high-performance derivative of the Ford 4.6-liter engine. Others might make 4.6-liter modular engines, but only FRPP engines are backed by the Ford Oval. Whether you want a FRPP 4.6-liter Aluminator for the performance, the exclusivity or the looks, Ford know-how is with you every step of the way. And with 100 years of racing success behind it, that means you are getting the very best! See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 67 CRATE ENGINES ALUMINATOR 4.6L DOHC LONG BLOCK NATURALLY ASPIRATED M-6007-A46NA* • • • • • • • • • • • • • • • • • • • • • • • 4.6L (281 cubic inches) 8.5:1 compression ratio (nominal) Forged pistons H-beam connecting rods Forged steel crankshaft Aluminum block M-6010-A46SC Blue cam covers M-6582-A54 Assembled long block with 2003-04 Mustang Cobra cylinder heads and camshafts Includes 2003-04 Mustang Cobra timing chain cover, water pump, Cobra windage tray and oil pan Fits 2003-04 Mustang Cobra Built with all NEW PARTS Does not include oil cooler/oil filter adapter Built with current available parts. Photos and specs may vary Shipping weight approximately 500 lbs See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog ALUMINATOR 4.6L FORGED NATURALLY ASPIRATED SHORT BLOCK M-6009-A46NA* ALUMINATOR 4.6L FORGED SUPERCHARGER SHORT BLOCK M-6009-A46SC* • Cobra rotating assembly with forged steel 8-bolt crank, H-beam rods and forged flat top pistons • Uses M-6010-A46NA block • Approximately 10:1 compression ratio when used with 50 cc heads • Fits 1996-04 Mustang GT, 1996-01 Cobra and 2003-04 Mach I front timing cover • Built with all NEW PARTS • Modifications may be necessary in some applications • Requires 8-bolt flywheel • Cobra rotating assembly with forged 8-bolt crank, H-beam rods and forged pistons with 16cc dish • Uses M-6010-A46SC block • Approximately 8.5:1 compression ratio when used with 50 cc heads • Direct bolt in for 2003-2004 Mustang Cobras • Built with all NEW PARTS 4.6L 3-VALVE MUSTANG GT ENGINE M-6007-3V46* ALUMINUM 4.6L FORGED SUPERCHARGER SHORT BLOCK M-6009-A46SCB* • • • • • • • • • • Complete 3-valve 4.6L Mustang engine assembly 300 hp @ 5750 rpm, 320 lb-ft of torque @ 4500 rpm Aluminum block and cylinder heads Composite intake manifold for light weight and intake charge temp reduction • Includes manual transmission engine harness and flywheel • Vehicle harnesses and computer not included • Photo and specs may vary • • • • • *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CRATE ENGINES • • • • • 4.6L (281 cubic inches) 10:1 compression ratio (nominal) Forged pistons H-beam connecting rods Forged steel crankshaft Aluminum block M-6010-A46NA Blue cam covers M-6582-A54 Assembled long block with 2003-04 Mustang Cobra cylinder heads and camshafts Includes 1999-01 Mustang Cobra and 2003-04 Mach I timing chain cover, water pump, Cobra windage tray and oil pan Fits 1999-01 Mustang Cobra and 2003-04 Mach I Built with all NEW PARTS Does not include oil cooler/oil filter adapter Built with current available parts. Photos and specs may vary Shipping weight approximately 500 lbs See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog ALUMINATOR 4.6L DOHC LONG BLOCK SUPERCHARGED M-6007-A46SC* 4.6L (281 cubic inch) Forged pistons with 16 cc dish Forged steel crankshaft H-beam connecting rods Uses M-6010-A46NA aluminum block Approximately 8.5:1 compression ratio with 50 cc heads Fits 1996-04 Mustang GT, 1996-01 Cobra and 2003-04 Mach I Built with all NEW PARTS Modifications may be necessary in some applications Low compression for supercharged applications Requires 8-bolt flywheel www.fordracingparts.com 69 ENGINE BLOCKS ALUMINUM 5.0L BLOCK M-6010-T50* CAST IRON 5.0L BLOCK M-6010-BOSS50* • Big bore 4.6L aluminum block with cast iron liners • 94 mm (3.70") cylinder bore size. Stock cylinder bore size 90.2 mm (3.552") • 227 mm (8.9370") deck height (same as 4.6L) • Produces 5.0L displacement when used with a 4.6L stock stroke crankshaft, stock length connecting rods and custom 94 mm-diameter pistons • Cross bolted main bearing caps • Same block that is used in the 5.0L “Cammer” crate engine • Replacement sleeve M-6055-B The Boss 5.0 block is a 4.6L deck height 94 mm cylinder bore cast iron block. Cast in Ford’s Cleveland plant, it uses a proprietary iron mix to yield the strongest possible casting strength with least porosity and greatest consistency. • Siamese 94 mm bore • 4-bolt main with interference fit nodular iron machined caps • Increased main web window size for less oil movement and greater power • Approximately 165 lbs ALUMINUM 4.6L BLOCK M-6010-A46NA* ALUMINUM 5.4L BLOCK M-6010-GT** • Latest generation aluminum 4.6L block • Features chilled bulkhead casting process for a stronger main web and bulkheads • Round main web windows reduce stress areas for potential failure • Ball burnished 17 mm-thick main caps for strength and rigidity • Works with most production 4.6L aluminum block front dress • • • • • Original equipment for the 2005 Ford GT supercar 356-T6 aluminum casting with cast iron sleeves 90.2 mm bore Dry sump machined, can be machined for wet sump Enhanced bulkhead and main webbing strength compared to production 4.6L aluminum block • Machined for piston oil squirters • Block modifications required for starter in non GT applications • Weight: 110 lbs ALUMINUM 4.6L BLOCK FOR SUPERCHARGER M-6010-A46SC* • Latest generation aluminum 4.6L block • Features chilled bulkhead casting process for a stronger main web and bulkheads • Round main web windows reduce stress areas for potential failure • Ball burnished 17 mm-thick main caps for strength and rigidity • Machined for 2003-04 Cobra front dress, will also fit some 2-valve front dress from iron 4.6L blocks • Knock sensor mounting bosses eliminated for use with supercharger applications PRODUCTION CAST IRON 4.6L BLOCK M-6010-D46** Romeo Engine Plant PRODUCTION CAST IRON 5.4L BLOCK M-6010-M54** • Production replacement 4.6L SOHC 2V cylinder block • Great for custom engine builds • Fully machined • • • • 70 Techline (800) FORD788 Production 5.4L block Windsor-style main cap locators 90.2 mm bore size Newer casting design features lower end improvements to minimize noise, vibration and harshness *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CYLINDER HEADS HIGH-PERFORMANCE CYLINDER HEAD M-6049-D46 Complete 1996-98 Only • GT heads feature a reduced size lash adjuster allowing for a raised intake port, creating a more direct intake path • These heads are the final revision of the 2000 Cobra R heads • The most durable highest flowing modular engine cylinders heads available • Same casting used on M-6007-R50 Grand Am cup race engine • Fully loaded assembly • 37 mm intake valves, 32 mm exhaust valves • Intake valve lift: 11.2 mm, exhaust valve lift: 11.5 mm • 42.5 to 45 cc combustion chambers 4.6L POWER IMPROVEMENT (PI) CYLINDER HEADS M-6049-P46** RH 2V M-6050-P46** LH 2V ENGINE COMPONENTS Add approximately 35 hp over production E.O. #D-308-6 4.6L SOHC heads. This cylinder head assembly is considered to be the basic cornerstone for increased performance of the naturally aspirated engine. The primary design goal for the head is to provide increased airflow capability resulting in significant horsepower gain. Specific design features include: • Bolt-on interchangeability with the production head. All head faces (cam cover, intake manifold, exhaust manifold and deck face) are identical to production. The head can be used with production or Ford Racing intake and exhaust manifolds, and all other accessories in production position • Larger inlet and exhaust valve size. Intake valve M-6507-D461 diameter has increased from 44.5 mm to 46.83 mm. Exhaust valve M-6505-D461 diameter has increased from 34.0 mm to 35.88 mm. Extensive flow development was done to optimize port contours to take advantage of these changes. Final test results show approximate airflow increases over production of 27% (intake) and 44% (exhaust). The above results are at maximum production valve lift (12 mm) • Intake valve centerline has been moved 2.0 mm closer to chamber centerline. This has the effect of unshrouding the intake valve, and making better use of the increased valve size • Potential for high-lift camshafts, larger valve springs and additional racing port work at customer discretion • Excellent quality chamber and port finish, 356-T6 aluminum casting • Performance calibration recommended • 51 cc combustion chamber • Uses spark plug AGSF-32C NOTE: Use of M-6067-D46 head changing kit recommended. FORD GT CYLINDER HEAD ASSEMBLIES M-6049-GT** RH M-6099-GT** LH • Current production 4.6L SOHC 2V Romeo engine aluminum cylinder heads • Fully machined and assembled with production Mustang GT valvetrain and camshaft • Great for custom engine builds • Less expensive than replacing valvetrain and remachining a used cylinder head • Less expensive alternative to aftermarket performance heads • Can be used on 1996-98 engines with additional modifications and parts • 43.9 +/– 1.5 cc combustion chamber • Raises compression on 1996-98 engines to 10:1 M-6049-P46 shown Matt Kenseth #17 NASCAR Nextel Cup Series *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. M-6050-P46 shown www.fordracingparts.com 71 CYLINDER HEADS CNC PORTED 3-VALVE CYLINDER HEAD ASSEMBLIES M-6049-463P* RH CNC Ported M-6050-463P* LH CNC Ported • • • • • • • • New production cylinder head castings CNC ported to increase flow and performance 50.3 cc combustion chamber Intake flow increased approximately 20% Exhaust flow increased approximately 30% Assembled with production springs, valves, retainers, locks and seals Does not include camshaft, followers and hydraulic lash adjusters Minimize your vehicle down time waiting for a shop to port your heads. Get a brand new head for a little more than the price of exchange! • No exchange required M-6050-463P shown M-6049-463P shown CNC PORTED 4-VALVE CYLINDER HEAD ASSEMBLIES M-6049-464P* RH CNC Ported M-6050-464P* LH CNC Ported • • • • • • • New production cylinder head castings Fits 1999-04 DOHC 4.6L Mustangs 52 cc combustion chambers CNC ported to increase flow and performance Intake flow increased approximately 15% Exhaust flow increased approximately 29% Assembled with 2004 Cobra production springs, valves, retainers, locks and seals • Does not include camshafts, followers and hydraulic lash adjusters • Minimize your vehicle down time waiting for a shop to port your heads. Get a brand new head for a little more than the price of exchange! • No exchange required 72 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CYLINDER HEAD CHANGING KIT M-6067-D46** SOHC 2V M-6067-T46** DOHC 4V➀ HIGH-LIFT CAMSHAFT KIT M-6550-T46* Contains all components necessary for changing cylinder heads on 1996-04 4.6L Mustang. Includes several parts that make this task significantly easier. Highly recommended when installing M-6049-D46/ P46/T46 cylinder heads. NOTE: ➀ Except supercharged engines. “CAMMER” 5.0L HEAD CHANGING KIT M-6067-T50* In order to maximize the performance potential of the high-flow cylinder heads, we recommend these higher lift camshafts. Contained in the kit are all components necessary to utilize these improved profiles (including valves and springs). These camshafts provide excellent power right to the fuel cutoff at 7000 rpm, and actually bolster low-end torque as well. Drivability on the street is superior to production cams. Because it is necessary to install new valves with these cams, it is recommended that this kit be purchased and installed at the same time as the cylinder heads. Cam specs: lift 12 mm, intake duration 258°, exhaust duration 254°, 109° center line. • Similar to kit M-6067-T46 but for “Cammer” 5.0L modular engine with 94 mm bore • Contains head gaskets, spacers, head bolts, exhaust gaskets and dipstick tube • Highly recommended for simplifying a difficult task 4.6L DOHC 4V FRPP VALVE M-6505-T46* Exhaust M-6507-T46* Intake • Same valves used in the M-6550-T46 Camshaft Kit • Exhaust valve head diameter 30.0 mm, total length 116.2 mm, tip length 7.5 mm • Intake valve head diameter 37.0 mm, total length 135.7 mm, tip length 12.7 mm M-6505-T46 shown M-6507-T46 shown 2007 SVT MUSTANG HIGH LIFT CAM SET M-6550-GT* • Replacement springs for the M-6550-T46 high-lift cam kit • Recommended install height 39.45 mm ENGINE COMPONENTS HIGH-LIFT 4.6L VALVE SPRINGS M-6513-T46* Sold in sets of 32 • Original equipment camshafts for the Ford GT supercar • Direct retrofit to the 2007-08 SVT Mustang • Increases lift from the stock 10 mm to 11.14 mm intake and 11.36 mm exhaust • Compatible with production springs, followers and lash adjusters • May require calibration to achieve optimized performance M-6067-D46 shown FORD RACING PERFORMANCE PARTS USED: FRPP Gears FRPP Tach FRPP Supercharger FRPP 47# Fuel Injectors FRPP Oil Filter Paul’s High Performance’s Dragin’ Snake First ’07 Shelby in the 10’s *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 73 SUPERCHARGERS 74 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2003-04 MUSTANG COBRA UPGRADED SUPERCHARGER KITS M-6066-CT46P* Polished M-6066-CT46* Black Wrinkle • DESIGNED FOR USE WITH FACTORY TWIN BORE THROTTLE BODY!!! • Kit includes supercharger and supercharger inlet, manifold adapter plate and hardware kit • Does not require PCM, fuel pump or MAF meter upgrades • Simple bolt on increase at the rear wheels of 85 horsepower and 50 lb-ft of torque • Installation of this kit will void your new vehicle engine warranty 2003-04 MUSTANG COBRA UPGRADED SUPERCHARGER KITS FOR AFTERMARKET THROTTLEBODY M-6066-CT46PHP* Polished M-6066-CT46HP* Black Wrinkle • Designed for use with most aftermarket single blade oval bore throttle bodies – For applications using factory twin bore throttle body, use M-6066-CT46P • Kit includes supercharger, supercharger inlet, manifold adapter plate and hardware kit • Requires PCM, fuel pump and MAF meter upgrades • Installation of this kit will void your new vehicle engine warranty 2007-08 SVT MUSTANG SUPERCHARGER UPGRADE KIT M-6066-SGT* Black Wrinkle Finish ENGINE COMPONENTS • Fits 5.4L DOHC 2007-08 SVT Mustang • 105 hp increase over stock (605 hp vs. 500 hp), 90 lb-ft increase in torque over stock (570 lb-ft vs. 480 lb-ft) using correction factor SAE J1349 • 2.3L Twin Vortices Series Eaton supercharger features 4-lobe 160 degree twist rotors • Includes open element cold air intake system • Includes Pro-Cal tool voucher with kit • Engineered by Roush for Ford Racing • Premium fuel required • Available as part of Shelby Super Snake Package • 2007 SVT Mustangs must use upgraded damper M-6312-SVT (see www.fordracingparts.com) to maintain warranty coverage • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • E.O. # Pending See www.fordracingparts.com for the most up-to-date warranty information. Jamie McMurray celebrates his NASCAR Nextel Cup Series win at Daytona *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 75 SUPERCHARGERS MUSTANG GT SUPERCHARGER KITS M-6066-M463V Black Wrinkle M-6066-M463P Polished M-6066-M463V7 Black Wrinkle M-6066-M463P7 Polished • Fits 2005-06 Mustang GT with MANUAL or AUTOMATIC transmission • See www.fordracingparts.com for 2008 manual and automatic transmission applications • Produces 400 hp with 93 octane at approximately 5 psi of boost • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. See www.fordracingparts.com for the most up-to-date warranty information 2005-06 MUSTANG 4.6L BIG BOOST KIT M-9066-M11 • Big Boost kit converts M-6066-M463V/M463P from 400 hp to 500 hp • Fits 2005-06 Mustang GT with MANUAL transmission ONLY. • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! • Kit includes intercooling system, M-9407-GT05 fuel pump kit and smaller pulley • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Includes Pro-Cal voucher with official Ford Racing calibration • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only • Fits 2007 Mustang GT with MANUAL or AUTOMATIC transmission • See www.fordracingparts.com for 2008 manual and automatic transmission applications • Produces 400 hp with 93 octane at approximately 5 psi of boost • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. 2007 MUSTANG 4.6L BIG BOOST KIT M-9066-M117 • Big Boost kit converts M-6066-M463V7/M463P7 from 400 hp to 500 hp • Fits 2007 Mustang GT with MANUAL transmission ONLY. • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! • Kit includes intercooling system, M-9407-GT05 fuel pump kit and smaller pulley • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Includes Pro-Cal voucher with official Ford Racing calibration • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only M-9066-M11 shown 76 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 500 HP MUSTANG GT SUPERCHARGER KITS M-6066-M11 Black Wrinkle M-6066-M11P Polished • Fits 2005-06 Mustang GT with MANUAL transmission ONLY • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! • Produces 470 lb-ft of torque at 4200 rpm • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher with official Ford Racing calibration • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Similar to 400 hp kit but with smaller pulley, complete air to liquid intercooler system and dual fuel pump, fuel pump driver and harness • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. M-6066-M117* Black Finish M-6066-M11P7 Polished • Fits 2007 Mustang GT with MANUAL transmission ONLY • See www.fordracingparts.com for 2008 manual transmission applications • Produces 500 hp at 5800 rpm with 93 octane at approximately 11 psi of boost! • Produces 470 lb-ft of torque at 4200 rpm • Kit includes intake manifold supercharger, drive belt and all other accessories for installation of the supercharger • Includes Pro-Cal tool voucher with official Ford Racing calibration • Premium fuel required • DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Similar to 400 hp kit but with smaller pulley, complete air to liquid intercooler system and dual fuel pump, fuel pump driver and harness • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly. ENGINE COMPONENTS *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 77 ENGINE COMPONENTS 4.6L PERFORMANCE IMPROVEMENT (PI) INTAKE MANIFOLD M-9424-P46** HI-FLOW 70MM THROTTLE BODY M-9926-D462* 1996-04 Mustang • Current production plastic intake manifold used on 2001-04 4.6L SOHC 2V Mustang GT • Less expensive alternative to aftermarket performance intake manifolds for PI head swaps • Manifold fits 1999-04 Power Improvement head ports • Great for custom engine builds • Can be used on 1996-98 engines with Performance Improvement (PI) heads • Additional modifications and parts required • Bolts to stock intake manifold • Significant power increase THROTTLE BODY GASKET M-9933-D462* 1996-04 Mustang Did you know… The Ford GT head is a derivative of the 2000 Cobra R head. Those same heads have been used on the Rough Rider off-road racing program to make nearly 700 hp out of 6 liters naturally aspirated! • Replacement gasket for M-9926-D462 throttle body FORD RACING PERFORMANCE PARTS USED: Ford Racing Supplied Body in White FRPP Cylinder Block FRPP PI Cylinder Heads FRPP Intake FRPP Steel Crankshaft FRPP Oil Pump FRPP Competition Gauges and Gauge Pod Roxanne Shepard’s 2004 Mustang Best time to date: 9.60 @ 145 mph NSCA EFI Eliminator and NMRA Modular Motor Series 78 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. COATED DOHC CAM COVERS 4.6/5.4L M-6582-C464 • Fits 32V 4.6/5.4L engines with coil on plug (except Ford GT and 2007-08 SVT Mustang, see M-6582-CC) • Powdercoated for chrome appearance COATED 3-VALVE CAM COVERS 4.6/5.4L M-6582-C543V Powdercoated for chrome appearance M-6582-3VB Blue M-6582-3VBLK Black Wrinkle M-6582-3VS Silver • Fits all 2005-08 3-valve 4.6/5.4L engines • Powdercoated finish BLUE DOHC CAM COVERS 4.6/5.4L M-6582-A54 • Fits all 1997–present 32V 4.6/5.4L engines with coil on plug (except Ford GT and 2007-08 SVT Mustang) • Painted Ford GT blue • Shown with coil cover M-6067-A (sold separately) • For 2007-08 SVT Mustang, see M-6582-C (Does not fit 1999-04) • Significant power increase, reduces power loss from accessories by reducing accessory pulley speed • Three-piece kit with hardware and instructions • 4.6L SOHC engines • Aids acceleration by reducing accessory speed compared to the crankshaft WARNING: Engine cooling will be reduced • Fits most 4.6L/5.4L DOHC engines with coil on plug ignition • Micro polished billet aluminum • Features two-color Ford Racing ball milled logo 4.6/5.4L “POWERED BY FORD” COIL COVERS M-6067-GT ENGINE COMPONENTS UNDERDRIVE HORSEPOWER PULLEY KIT M-8509-D462* 1996-98 Mustang FORD RACING COIL COVERS M-6067-A • Original equipment on the Ford GT 5.4L DOHC • Fits most 4.6L/5.4L DOHC engines with coil on plug ignition 2007-08 SVT MUSTANG COIL COVERS M-6067-C • Original equipment on the 2007-08 SVT Mustang • Fits most 4.6L/5.4L DOHC engines with coil on plug ignition A.C. ELIMINATOR KIT M-19216-D46 • Fits 1996-08 Mustang with 4.6L engine SOHC/DOHC • Cast aluminum idler pulley bracket replaces the air conditioning compressor • Removes weight from the front of car for better weight transfer when racing • Bolts included • Uses stock belt HIGH-VOLUME OIL PUMP M-6600-D46 • Original equipment on 4.6L 4V • Increases flow on 4.6L 2V engines *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 79 ENGINE COMPONENTS STEEL 4.6L COBRA CRANKSHAFT M-6303-D46** STEEL 5.4L LIGHTNING CRANKSHAFT M-6303-M54** • Original equipment replacement crankshaft for 1996-01 4.6L DOHC Cobra engine • Can be used in 4.6L SOHC engines if 8-bolt flywheel is used • May require minor block modifications for counterweight clearance • • • • • DEEP SUMP 5.4L TRUCK OIL PAN M-6675-L54 MUSTANG PERFORMANCE FLYWHEELS • Fits all 1996-2004 5.4L F-150s with PN96 body • Increased capacity and baffling over stock pans for better oil control • Requires oil pump pickup tube (sold separately) Original equipment for the 1999-04 SVT Lightning 5.4L Forged steel 106 mm stroke Standard journal diameters 8-bolt flywheel The manual transmission flywheels listed below fit 4.6L SOHC/DOHC and Cobra engine applications. They are dimensionally the same as stock and have the same zero-balance specification as stock flywheels. The nodular iron units are stronger and have increased rpm capability. The billet steel units have even higher rpm capability and meet SFI specification 1.1. NODULAR IRON FLYWHEEL M-6375-D46(1)(2) • 164-tooth • 0 oz.-in. • 4.6L SOHC Mustang. Has increased rpm capability over stock cast iron flywheel BILLET STEEL FLYWHEELS M-6375-F46(1)(2) MUSTANG 4.6L OIL PAN M-6675-D46** • • • • Production 4.6L Mustang oil pan core Fits 1996-04 4.6L SOHC 2V and DOHC 4V Unpainted Does not include pickup tube • Works with oil pump and pickup kit M-6600-D46 • Can be used to build custom oil pan • 164-tooth • 0 oz.-in. • 4.6L SOHC Mustang. Has increased rpm capability over stock cast iron or M-6475-D46 nodular iron flywheel. Fits 10.5" and 11" clutch. Meets SFI 1.1 M-6375-G46(1)(2) • 164-tooth • 0 oz.-in. • 4.6L SOHC Mustang GT/DOHC Mustang Cobra. Has increased rpm capability over stock Cobra flywheel. Fits 10.5" and 11" clutch. Meets SFI 1.1 ALUMINUM FLYWHEEL M-6375-R00(1)(2) CRANKSHAFT DAMPER M-6316-D461* • • • • 80 4.6L SOHC Neutral balance High-performance replacement damper Meets SFI 18-1 specs Techline (800) FORD788 • 164-tooth • 0 oz.-in. • Used on the 2000 Cobra “R” Mustang. Fits Cobra 4.6L/5.4L DOHC 4-valve engines and other Mustangs with 8-bolt crank. Reduced rotating mass for faster engine acceleration in race applications. Fits 10.5" and 11" clutch. Meets SFI 1.1 NOTES: (1) Diaphragm clutch uses metric bolts and dowel pins. Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-B. Ford Racing kit M-6397-A302. (2) 4.6L engines may have 6 or 8 bolts to attach to the crankshaft. Check the engine code before ordering. Romeo built engines have 6 bolts and Windsor built engines have 8 bolts. All Cobra engines have 8 bolts. The 8th character in the VIN is (X) for Windsor engine plant or (W) for Romeo engine plant. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. SHORTY HEADERS FEATURES: STAINLESS STEEL 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to properties and corrosion resistance and where some weldability is required. An example of stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rustthrough resistant. A surface rust will form in most instances. This rust retards further corrosion. PART NUMBER TYPE M-9430-C54* M-9430-C54C* M-9430-E462* M-9430-E463* M-9430-E464* M-9430-E465* M-9430-S197* M-9430-S197C* Stainless Steel Ceramic Coated Stainless Steel Ceramic Coated Stainless Steel Ceramic Coated Stainless Steel Ceramic Coated NOTE: ➀ Does not fit 2003 and up. APPLICATION 2007-08 SVT Mustang 2007-08 SVT Mustang 1996-04 Mustang GT 4.6L SOHC 1996-04 Mustang GT 4.6L SOHC 1996-02 4.6L Cobra DOHC ➀ 1996-02 4.6L Cobra DOHC ➀ 2005-08 Mustang GT 2005-08 Mustang GT • • • • 409 stainless steel tubes Machined flange Bolts to stock exhaust pipes Includes gaskets, bolts and studs CERAMIC COATED STAINLESS STEEL • Identical to stainless steel header, but with Jet-Hot® ceramic finish • Stain and rust resistant • Super-premium quality • Lifetime Warranty • Finest short-tube headers you can buy JET-HOT® LIMITED WARRANTY This limited warranty becomes void if the product shows evidence of bending or mutilating of parts or burnout resulting from improper tuning. Warranty covers rust-through only and does not cover cosmetic rust or discoloration of material. This limited warranty shall be limited to the repair, adjustment or replacement of defective parts only. Does not cover any labor claims. Ask your dealer for a copy of this “Jet-Hot” limited warranty. REPLACEMENT HEADER GASKETS (SOLD IN PAIRS) PART NUMBER CYLINDER HEAD APPLICATION ENGINE COMPONENTS M-9448-A462* 4.6L SOHC M-9448-A464* 4.6L DOHC M-9448-3V* 4.6L 3V (Sold in package of 12 sets only) M-9448-A464 shown FORD RACING PERFORMANCE PARTS USED: FRPP Ford GT Engine FRPP Tach FRPP Twin 33# Fuel Injectors FRPP Oil Filter FRPP Gauges Paul’s High Performance’s Platinum Pony 9.50 @ 142 mph *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 81 CRATE ENGINES CRATE ENGINE DEVELOPMENT PROCESS All great crate engines start as an idea. The engineer begins with a horsepower target and the engine family for hitting that target. Then, the engineer documents the components that will likely achieve targeted horsepower and meet durability requirements. This procedure is based on years of experience in the high-performance engine building business. Many formulas also support this process. Next, the engineer has one or more development engines built and sent to 82 the engine dynamometer lab for break-in and testing. During dyno-testing, fuel distribution, best cam timing and best ignition timing for maximizing horsepower and torque are assessed. If target performance numbers are not met—or can be improved—changes are made accordingly. Oftentimes, different carburetors, camshafts, intake manifolds and cylinder heads are evaluated. After target numbers are reached, the engine is run for durability. Durability testing is based on the market application of the engine. Various durability tests may be run—sometimes as severe as 50 hours at wide open throttle, full power. Others may be cycling tests where the engine accelerates from peak torque to peak power, then decelerates back to peak torque, then repeats the cycle for many hours. The tests selected vary depending on the market application. Upon successful completion of durability testing, the engine package is released for production. CRATE ENGINE PART NUMBER M-6007-XEFM M-6007-Z50Z M-6007-X342 M-6007-Z347 M-6007-347NST Displacement (ci) 302 302 342 347 347 Horsepower (hp) 340 390 N/A 450 N/A Torque (lb-ft) 310 360 N/A 400 N/A Compression Ratio 9.0:1 10.0:1 10.0:1 9.7:1 10.0:1 Heads X303 GT-40 Z304DA High Flow X303 GT-40 Z304DA High Flow Z304DA Camshaft E303 Hyd. Roller Cam Z303 Hyd. Roller Cam X303 Hyd. Roller Cam Crane Hyd. Roller Cam F303 Hyd. Roller Cam Crank 3.00" Stroke Cast 3.00" Stroke Cast 3.40" Stroke Cast 3.40" Stroke Forged 3.40" Stroke Forged Piston 4.000" Forged 4.000" Forged 4.000" Hypereutectic 4.030" Forged 4.030" Forged Intake No Intake No Intake Victor Jr. Victor Jr. Victor Jr. Distributor No Distributor No Distributor Billet Distributor Billet Distributor Billet Distributor Valve Cover M-6000-K302R M-6582-R302 M-6582-E302P M-6582-BOSS M-6582-R302 Oil Pan Production Production Production 7qt. Rear Sump 7qt. Rear Sump Water Pump Serpentine Belt V Belt V Belt V Belt V Belt CRATE ENGINE PART NUMBER M-6007-D347SR M-6007-D351FT M-6007-D351RT M-6007-J58 M-6007-S58 Displacement (ci) 347 351 351 351 351 Horsepower (hp) 415 385 385 240 250 Torque (lb-ft) 400 377 377 340 350 Compression Ratio 10.0:1 9.0:1 9.0:1 8.5:1 8.5:1 Heads Z304DA X305 GT-40 X305 GT-40 Production Cast Iron Production Cast Iron Camshaft F303 Hyd. Roller Cam Z303 Hyd. Roller Cam Z303 Hyd. Roller Cam Standard Hyd. Cam Standard Hyd. Cam Crank 3.400" Forged 3.50" Stroke Cast 3.50" Stroke Cast 3.50" Stroke Cast 3.50" Stroke Cast Piston 4.030" Forged 4.000" Forged 4.000" Forged 4.000" Hypereutectic 4.000" Hypereutectic Intake Victor Jr. Victor Jr. Victor Jr. 2V Aluminum FRPP Dual Plane Distributor Billet Distributor Billet Distributor Billet Distributor Ford Duraspark Ford Duraspark Valve Cover M-6582-R302 M-6582-E302P M-6582-E302P Production M-6582-E302P Oil Pan 7qt. Rear Sump 7qt. Front Sump 7qt. Rear Sump Full Sump Production Full Sump Production Water Pump V Belt Both Both V Belt V Belt CRATE ENGINE PART NUMBER M-6007-D392FT M-6007-D392RT M-6007-Z351SR M-6007-C392FT M-6007-C392RT Displacement (ci) 392 392 351 392 392 Horsepower (hp) 430 430 400 475 475 Torque (lb-ft) 450 450 375 495 495 Compression Ratio 9.7:1 9.7:1 9.0:1 10.0:1 10.0:1 Heads X303 GT-40 X303 GT-40 Z304DA Z304DA High Flow Z304DA High Flow Camshaft Crane Hyd. Roller Cam Crane Hyd. Roller Cam Hyd. Roller Cam Hyd. Roller Cam Hyd. Roller Cam 3.85" Forged Crank 3.85" Stroke Cast 3.85" Stroke Cast 3.50" Forged 3.85" Forged Piston 4.030" Forged 4.030" Forged 4.000" Forged 4.030" Forged 4.030" Forged Intake Victor Jr. Victor Jr. Victor Jr. Victor Jr. Victor Jr. Distributor Billet Distributor Billet Distributor No Distributor Billet Distributor Billet Distributor Valve Cover M-6582-E302P M-6582-E302P M-6582-R302 M-6582-E302P M-6582-E302P Oil Pan 7qt. Front Sump 7qt. Rear Sump 10qt. Rear Sump 7qt. Front Sump 7qt. Rear Sump Water Pump Both Both V Belt Both Both Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. BOSS 302 ENGINE CRATE ENGINES The Boss 302 block is the cornerstone of the new Ford Racing Performance Parts 302 crate engines. This new Boss family of engines will replace some existing crate engines. You can expect the same level of quality now with an even stronger 4-bolt engine block. STOCK BLOCK ENGINE NEW BOSS BLOCK ENGINE M-6007-XE3M M-6007-X302E M-6007-XB3M M-6007-X302B M-6007-Z50Z M-6007-Z302Z M-6007-C347 M-6007-Z347 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 83 CRATE ENGINES 5.0L/302 – 340 HP GT-40 ALUMINUM HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-X302B* B303 Camshaft - Manual transmission M-6007-X302E* E303 Camshaft - Auto or Manual Transmission • 302 cubic inch • 345 hp with M-6250-B303, 340 hp with M-6250-E303 camshaft, headers and 65 mm throttle body not included • 9.0:1 compression ratio (nominal) • Forged pistons • Forged steel connecting rods • BOSS 4-bolt main block M-6010-BOSS302 • Hydraulic roller camshaft M-6250-B303, .480" lift intake and exhaust, duration at .050" is 224 degrees intake and exhaust • Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake and exhaust • Double roller timing chain set M-6268-A302 • Forged steel crankshaft • Rear sump pan fits most Fox body cars • Ford Racing aluminum GT-40 cylinder heads M-6049-X306 with 1.94" intake valves and 1.54" exhaust valves • Roller rocker arms M-6564-B351 • Built with all new parts • Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a rear sump oil pan and pickup, regular rotation timing cover and reverse rotation water pump and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A reverse rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-BOSS302) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The flywheel included (M-6375-B302) should work for most 157-tooth manual transmission applications. For other transmission applications use the proper O balance flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 425 lbs. 84 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 5.0L/302 – 340 HP GT-40 ALUMINUM HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-XEFM* E303 Camshaft • • • • • • • • • • • • CRATE ENGINES • • Auto or Manual Transmission 302 cubic inch 340 hp @ 5500 rpm 9.0:1 compression ratio (nominal) Forged pistons Forged steel connecting rods Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake and exhaust Double roller timing chain set M-6268-A302 Nodular iron crankshaft Rear sump pan fits most Fox body cars Ford Racing aluminum GT-40 cylinder heads M-6049-X303 with 1.94" intake valves and 1.54" exhaust valves Roller rocker arms M-6564-B351 New block, oil and water pumps, oil pan, flywheel and harmonic balancer Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a rear sump oil pan and pickup, regular rotation timing cover and reverse rotation water pump and EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A reverse rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-K302R) should fit most 1986-93 Mustang EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The flywheel included (M-6375-B302) should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 50 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 425 lbs. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 85 CRATE ENGINES 5.0L/302 CID SMALL BLOCK 390 HP “Z” HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-Z50Z* • • • • • • • • • • • • • • • 302 cubic inch 390 hp (with headers, and a 650 CFM Holley carburetor not included) 360 lb-ft of torque @ 5000 rpm 10.0:1 compression ratio (nominal) Forged pistons Forged steel cap screw connecting rods Hydraulic roller camshaft M-6250-Z303, .569" lift intake and exhaust, duration at .050" is 228 degrees intake and exhaust Double roller timing chain M-6268-A302 Nodular iron crankshaft Rear sump pan fits most Fox body cars Ford Racing aluminum “Z” cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves Roller rocker arms M-6564-F351 New block, oil and water pumps, oil pan and high-performance harmonic damper Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog MINI STARTERS – SMALL BLOCK M-11000-A50 1.1 kw Hi-torque Starter M-11000-B51 1.4 kw Super Hi-torque Starter INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a rear sump oil pan and pickup, regular rotation timing cover, reverse rotation water pump and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-R302) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The damper assembly M-6316-A50 may require a spacer for pulley alignment, see page 126. • The flywheel (M-6375-C302) not included should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 50 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 405 lbs. FLYWHEELS NOTE: For optional flywheels (sold separately), see pages 171-172. • Small diameter mini-starter—great for additional header clearance • Weighs approximately 5 lbs. less than pre-1989 production starter, yet provides more cranking power • Comes with special battery cables and instructions. Must use firewall solenoid • Fits most 289/302/351W/351C engines except 164-tooth manual transmission 86 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 5.0/342 GT-40 ALUMINUM HEAD FORD RACING PERFORMANCE CRATE ENGINE M-6007-X342* • • • • • • • • • • • • • • 342 cubic inch hp to be determined lb-ft of torque to be determined 10.0:1 compression ratio (nominal) Hypereutectic pistons Forged steel cap screw connecting rods Hydraulic roller camshaft M-6250-X303 with .542" lift intake and exhaust, duration at .050" is 224 degrees intake and exhaust Double roller timing chain M-6268-A302 Nodular iron crankshaft Rear sump pan fits most Fox body cars MSD billet distributor Ford Racing aluminum GT-40 cylinder heads M-6049-X303 with 1.94" intake valves and 1.54" exhaust valves Roller rocker arms M-6564-B351 Single plane “Victor Jr.” intake manifold M-9424-D302 New block, oil and water pumps, oil pan, steel billet flywheel and harmonic balancer Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog COMPLETE 5.8L/351 CRATE ENGINE ASSEMBLIES M-6007-J58* 240 hp 2V M-6007-S58* 250 hp 4V • • • • • • • • • • • • • 5.8L/351 cubic inch 240 hp @ 3800 rpm-2V 250 hp @ 3800 rpm-4V 340 lb.-ft. @ 3200 rpm-2V 350 lb.-ft. @ 3300 rpm-4V 8.5:1 compression ratio Aluminum 2V intake E6TE-9424-DA on 240 hp Ford Racing 4V dual plane intake on 250 hp High-torque, hydraulic flat tappet camshaft E7JE-6250-AA Cylinder heads E5AE-6090-CA without thermactor passages Duraspark distributor, coil and spark plug wires Block is hydraulic roller cam compatiable Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog CRATE ENGINES • • • INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a rear sump oil pan and pickup, regular rotation timing cover and regular rotation water pump and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A regular rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-R302) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The flywheel included (M-6375-A302) should work for most 157tooth manual transmission applications. For other transmission applications use the proper 28 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 425 lbs. INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a mid-sump oil pan and pickup, regular rotation timing cover and regular rotation water pump and non-EFI valve covers. • A different oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers on 240 hp should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The valve covers M-6582-E302P on 250 hp should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The flywheel included F4TR-6380-AA 164-tooth HD truck, will not work for most applications. For other transmission applications use the proper 28 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 595 lbs. M-6007-S58 shown *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 87 CRATE ENGINES 5.0L/302-347 CID SMALL BLOCK 450 HP "Z" HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-Z347* • 347 cubic inch • 450 hp @ 6000 rpm (with headers, and a 650 CFM Holley carburetor not included) • 400 lb-ft of torque @ 4900 rpm • 9.7:1 compression ratio (nominal) • Forged pistons • Forged steel cap screw connecting rods • Hydraulic roller camshaft, .580" lift intake .602" exhaust, duration at .050" is 232 degrees intake and 240 degrees exhaust with 1.6 rocker arms • Double roller timing chain set M-6268-A302 • Forged steel crankshaft • "BOSS" 4-bolt main block, M-6010-BOSS302 • High-performance rear T-sump oil pan • Rear sump pan fits most Fox body cars • MSD billet distributor • Ford Racing aluminum “Z” cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves • Roller rocker arms M-6564-F351 • Single plane “Victor Jr.” intake manifold M-9424-D302 • New heavy-duty block, oil and water pumps, performance oil pan and highperformance harmonic balancer • Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a rear T-sump performance oil pan and pickup, regular rotation timing cover and regular rotation water pump and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-BOSS) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The damper M-6316-C351 may require a spacer for pulley alignment, see page 126. • The flywheel (M-6375-A302) not included should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 28 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 465 lbs. 347 CID FORD RACING STROKER SHORT BLOCK ENGINE ASSEMBLY M-6009-Z347* • 347 CID • "BOSS" 4-bolt main block, M-6010-BOSS302 • Forged aluminum .030" overbore pistons with valve reliefs for Z304, X306, X307, N351, GT-40 and other inline valve Windsor cylinder heads. Valve notches approximately 4 cc. Check valve to piston clearance for valve lift over .500". Piston to deck .000" (nominal) • 3.40 stroke forged steel stroker crank • Forged steel connecting rods • Hydraulic roller camshaft compatible • Balanced for 28.2 in./oz. damper and flywheel • Assembled and ready for your heads, cam and timing chain set • Requires head gaskets M-6051-CP331 or M-6051-S331 or equivalent • Photo and specs may vary 88 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 5.8L/351–385 HP GT-40 ALUMINUM HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-D351FT* Front Sump T-pan (Manual Transmission) M-6007-D351RT* Rear Sump T-pan (Manual Transmission) • • • • • • • • • • • • • • • • CRATE ENGINES • • • 351 cubic inch 385 hp (with headers, and a 650 CFM Holley carburetor not included) 377 lb-ft of torque @ 4500 rpm 9.0:1 compression ratio (nominal) Forged pistons Forged steel cap screw connecting rods Hydraulic roller camshaft M-6250-Z303, .552" lift intake and exhaust, duration at .050" is 228 degrees intake and exhaust Double roller timing chain set M-6268-A302 Nodular iron crankshaft High-performance T-sump oil pan Front sump fits most passenger cars that came factory equipped with front sump pan Rear sump pan fits most Fox body cars MSD billet distributor Ford Racing aluminum GT-40 cylinder heads M-6049-X305 with 1.94" intake valves and 1.54" exhaust valves Roller rocker arms M-6564-B351 Single plane “Victor Jr.” intake manifold M-9424-V351 New heavy-duty 5.8L “Sportsman” block, oil and water pumps, performance oil pan, steel billet flywheel and high-performance harmonic balancer Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a T-sump performance oil pan and pickup, regular rotation timing cover and both regular (installed) and reverse rotation water pumps and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A standard rotation water pump is installed on the engine and a reverse rotation is included loose in the box. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-R302) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The damper assembly M-6316-C351 may require a spacer for pulley alignment, see page 126. • The flywheel included (M-6375-A302) should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 28 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 545 lbs. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 89 CRATE ENGINES 5.8L/351–392 CID SMALL BLOCK 430 HP GT-40 HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-D392FT* Front Sump T-pan (Manual Transmission) M-6007-D392RT* Rear Sump T-pan (Manual Transmission) • 392 cubic inch • 430 hp @ 5500 rpm (with headers, and a 750 CFM Holley carburetor not included) • 450 lb-ft of torque @ 4000 rpm • 9.7:1 compression ratio (nominal) • Forged pistons • Forged steel connecting rods • Hydraulic roller camshaft with .563" lift intake and 584" lift exhaust, duration at .050" is 232 degrees intake and 240 degrees exhaust • Double roller timing chain set M-6268-A302 • Nodular iron crankshaft • High-performance T-sump oil pan • Front sump fits most passenger cars that came factory equipped with front sump pan • Rear sump pan fits most Fox body cars • MSD billet distributor • Ford Racing aluminum GT-40 cylinder heads M-6049-X303 with 1.94" intake valves and 1.54" exhaust valves • Roller rocker arms M-6564-B351 • Single plane “Victor Jr.” intake manifold M-9424-V351 • New heavy-duty 5.8L “Sportsman” block, oil and water pumps, performance oil pan, steel billet flywheel and high-performance harmonic balancer • Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a T-sump performance oil pan and pickup, regular rotation timing cover and both regular (installed) and reverse rotation water pumps and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A standard rotation water pump is installed on the engine and a reverse rotation is included loose in the box. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-R302) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The damper assembly M-6316-C351 may require a spacer for pulley alignment, see page 126. • The flywheel included (M-6375-A302) should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 28 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 545 lbs. 90 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 5.8L/351–392 CID SMALL BLOCK 475 HP “Z” ALUMINUM HEAD FORD RACING PERFORMANCE CRATE ENGINE ASSEMBLY M-6007-C392FT* Front Sump T-pan (Manual Transmission) M-6007-C392RT* Rear Sump T-pan (Manual Transmission) CRATE ENGINES • 392 cubic inch • 475 hp @ 5600 rpm (with headers, and a 750 CFM Holley carburetor not included) • 495 lb-ft of torque @ 4400 rpm • 10:1 compression ratio (nominal) • Forged pistons • Forged steel cap screw connecting rods • Hydraulic roller camshaft, .580" lift intake and .602" lift exhaust, duration at .050" is 232 degrees intake and 240 degrees exhaust • Double roller timing chain set M-6268-A302 • Forged steel crankshaft • High-performance T-sump oil pan • Front sump fits most passenger cars that came factory equipped with front sump pan • Rear sump pan fits most Fox body cars • MSD billet distributor • Ford Racing aluminum “Z” cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves • Roller rocker arms M-6564-F351 • Single plane “Victor Jr.” intake manifold M-9424-V351 • New heavy-duty 5.8L “Sportsman” block, oil and water pumps, performance oil pan, steel billet flywheel and high-performance harmonic balancer • Can be used in kit cars, street rods, Mustangs, Fox-bodied cars and trucks • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a T-sump performance oil pan and pickup, regular rotation timing cover and both regular (installed) and reverse rotation water pumps and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump. • A standard rotation water pump is installed on the engine and a reverse rotation is included loose in the box. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-R302) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The damper assembly M-6316-C351 may require a spacer for pulley alignment, see page 126. • The flywheel included (M-6375-A302) should work for most 157-tooth manual transmission applications. For other transmission applications use the proper 28 oz. flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 545 lbs. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 91 CRATE ENGINES 347 CID SMALL BLOCK 415HP SEALED CRATE ENGINE ASSEMBLY M-6007-D347SR* • 347 cubic inch • 415 hp @ 6000 rpm (with headers, and a 650 CFM Holley carburetor not included) • 400 lb-ft of torque @ 4900 rpm • 10.0:1 compression ratio (nominal) • Forged pistons • Forged steel cap screw connecting rods • Hydraulic roller camshaft M-6250-F303, .523" lift intake and exhaust, duration at .050" is 226 degrees intake and exhaust • Double roller timing chain set M-6268-A302 • Forged steel crankshaft • High-performance rear sump circle track oil pan • MSD billet distributor • Ford Racing aluminum “Z” cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves • Roller rocker arms M-6564-F351 • Single plane “Victor Jr.” intake manifold M-9424-D302 • New heavy-duty race block, oil and water pumps, performance oil pan and high-performance harmonic damper • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required • Engine is sealed for circle track competition where rules allow • Engine is internally balanced, “0” balance flywheel required • Flywheel is not included See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog 347 CID SMALL BLOCK 405HP SEALED CRATE ENGINE ASSEMBLY M-6007-347NST* • 347 cubic inch • 405 hp @ 6000 rpm (with headers, and a 650 CFM Holley carburetor not included) • 10:1 compression ratio (nominal) • Forged pistons • Forged steel cap screw connecting rods • Hydraulic roller camshaft M-6250-F303, .528" lift intake and exhaust, duration at .050" is 226 degrees intake and exhaust • Double roller timing chain set M-6268-A302 • High-performance rear sump circle track oil pan • Forged steel crankshaft • MSD billet distributor • Ford Racing aluminum “Z” cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves • Roller rocker arms M-6564-F351 • Single plane “Victor Jr.” intake manifold M-9424-D302 • New heavy-duty race block, oil and water pumps, performance oil pan and high-performance harmonic damper • Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes • Engine is sealed for circle track competition where rules allow • Engine is internally balanced, “0” balance flywheel required • Flywheel is not included • Designed for use in NASCAR Late Model Series • Same as M-6007-D347SR except cam timing change to conform with NASCAR rules 92 Techline (800) FORD788 See Also... • Crate Engine Build-Up • Crate Engine Warranty • Engine Tips & Specs • Crate Engine Catalog *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. THERE IS NO REPLACEMENT FOR DISPLACEMENT. Heads turn, the ground shakes, mothers check for their children, the air fills with the sweet smell of exhaust! There’s nothing like the sound of a big block Ford roaring to life! Ford Racing has always been at the forefront of the big block performance by providing engines of the highest quality with over 600hp and gobs of torque. Even road racers grin from ear to ear when they hear a big block! We are proud to usher in the new era of big block performance with an entire new line of crate engines based on a new Ford Racing block. Look for coverage of this exciting new product at fordracingparts.com and on the newsstand in your favorite enthusiast magazine in the months to come. The new era of big block performance is coming so when you can’t find any replacement for displacement, look no further than Ford Racing! FLYWHEEL M-6375-Z460 Use in 1979-95 Mustang and other Fox-chassis cars to mount 429/460 engines. Our rubber insulated mount kit is designed to work with M-6675-A460 rear sump oil pan kit and custom headers. NOTE: Does not fit I-6 cylinder front crossmember. • Fits 1979-97 460 and 460/514 Ford Racing crate engines with external balance • For external balance only • 11" long or diaphragm-style clutch with 5/16" holes • 11.5" and 12" long or diaphragm-style clutch • 11" diaphragm Ford Trucks even pattern • Meets SFI 1.1 CRATE ENGINES 460 FOX ENGINE SWAP MOUNTS M-6038-A460* 351 SEALED RACE ENGINE M-6007-Z351SR • • • • • • • • • • • • • • • • • • • 351 cubic inch 400 hp @ 5800 rpm (with headers and 650 CFM holley carburetor) 375 lb-ft @ 4700 rpm 9.0:1 compression ratio (nominal) Forged pistons Forged steel connecting rods Hydraulic roller camshaft, .513" lift intake and .526" lift exhaust, duration at .050" is 226 degrees intake and 228 degrees exhaust Double roller timing chain set M-6268-A302 Forged steel crankshaft High-performance rear sump circle track oil pan MSD distributor Ford Racing aluminum “Z” cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves Roller rocker arms M-6564-F351 Single plane “Victor Jr.” intake manifold M-9424-V351 New heavy duty 351 race block, oil and water pumps and a highperformance harmonic damper Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes Engine is sealed for circle track competition where rules allow Engine is internally balanced, “0” balance flywheel required Flywheel is not included See Also... • Crate Engine Build-Up • Engine Tips & Specs • Crate Engine Catalog *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. INSTALLATION NOTES: See engine installation and tuning tips on page 95. Some or all of the following items may need to be changed from your original engine or modified for proper installation: • This engine has a rear sump performance oil pan and pickup, regular rotation timing cover and regular rotation water pump and non-EFI valve covers. • A different performance oil pan and pickup may be required for your application. Call the Techline at (800) FORD788 for more information. • The timing chain cover will work with most regular rotation water pumps. • Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump • A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers found on page 123. • The valve covers (M-6582-R302) should fit most non-EFI applications, optional valve covers (sold separately) are available on pages 128-130. • The damper M-6316-C351 with counterweight removed, may require a spacer for pulley alignment, see page 126. • The flywheel (M-6375-D302) not included should work for most 157-tooth manual transmission applications. For other transmission applications use the proper “0” balance flywheel, see pages 171-172. • Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order). • Built with current available parts. Photo and specs may vary. • Shipping weight approximately 545 lbs. www.fordracingparts.com 93 ENGINE COMPONENTS ENGINE SWAP SIZE CHART (SEE INDIVIDUAL ENGINE INSTALLATION NOTES PAGES 84-91 FOR WEIGHTS) 460 ENGINE 302/351W ENGINE 32" Length 27 1/ 2" Length ➀ 302 20 3/ 4" Height 26" Height 351W 23 3/ 4" Height NOTE: 302 – 183/4" Width / 351W – 21" Width NOTE: ➀ With short serpentine water pump M-8501-A50. NOTE: 26" Width Did you know… That an aluminum 4.6L block weighs approximately 85 lbs. while the iron versions weigh approximately 155 lbs. 4.6L MODULAR ENGINE 28" Length Did you know… The new 3-valve 4.6L engine in the 2005-08 Mustang weighs only 420 lbs. dressed. SOHC 26" Height DOHC 29 7/ 8" Height Did you know… 5.4L blocks received more material in 2002 for Noise Vibration and Harshness (NVH) control. Pre-2002 blocks weighed 185 lbs., later blocks weigh 200 lbs. Did you know… You can easily distinguish Romeo vs. Windsor 4.6 liter iron blocks by the main caps. Windsor blocks have dowels to locate the main caps while Romeo blocks use jack screws to locate the main caps. NOTE: SOHC – 255/8" Width / DOHC – 30" Width 94 Techline (800) FORD788 Did you know… All 5.4L iron blocks are made with the Windsor main cap style, even those that go into engines coming out of Romeo engine plant. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. ENGINE TECH TIPS ENGINE INSTALLATION AND TUNING TIPS Performance engine durability is dependent on several supporting systems including the cooling system, fuel delivery system, ignition system and oiling system. If the support systems are not adequate, poor engine performance and possible engine failure could result. OILING SYSTEM CONSIDERATIONS/ COMMON PROBLEMS IGNITION SYSTEM CONSIDERATIONS/ COMMON PROBLEMS • The ignition system must deliver a properly timed spark. There are a lot of factors that determine when the spark should be delivered. The most common factors include: compression ratio, fuel quality, fuel octane rating, combustion chamber design, engine operating temperature, power adders such as NOS or supercharger, inlet air temp, altitude and load. • Avoid too much or too little timing for your engine combination. • Avoid hooking up the vacuum advance to intake manifold vacuum instead of ported vacuum. FUEL DELIVERY CONSIDERATIONS • Size of fuel pump, size of fuel line, fuel pump placement, fuel filter placement, fuel filter size, injector size, fuel rail size, fuel pressure, jet size and baffling in the fuel tank. • Does the fuel system maintain full pressure at peak engine horsepower in high gear? Altitude, air temperature and fuel characteristics including quality, specific gravity and octane rating, will affect your jetting requirements. Engine efficiency and Brake Specific Fuel Consumption (BSFC) also have an effect. Here are some examples of a Holley 750 CFM 4V. Octane Temp. Altitude Jetting Front Jetting Rear 94 80 F 0 ft. 81 86 Aviation 100LL 80 F 0 ft. 81 84 110 Race 80 F 0 ft. 78 83 94 80 F 3000 ft. 76 81 94 80 F 6000 ft. 73 77 94 40 F 0 ft. 84 89 94 120 F 0 ft. 78 83 As you can see by these examples, jet requirements can vary a lot depending on fuel, altitude and temperature. Oxygenated fuels are available in some states and can dramatically affect your jetting requirements. Make sure you get your jetting correct. Aviation fuel is lighter and will require richening an engine in relationship to its requirement with pump gas. We have found in the dyno testing of our crate engines that 1 point richer on air/fuel ratio equals only a few percent less power. Running an engine as lean as possible produces the best power but also increases combustion temperatures and the chances of engine damage. COMMON PROBLEMS WITH FUEL DELIVERY SYSTEMS • Do not mount an EFI electric fuel pump so it has to draw fuel from the tank. This creates negative pressure in the fuel line allowing the fuel to boil at a lower temperature. • The pump must be mounted in the tank or in a location so that it is gravity fed. • If the fuel rail is too small and you have large injectors, this can create a pulse in the fuel rail allowing fuel starvation on some cylinders. • Fuel should be pushed through the fuel filter. Pulling fuel through a filter can cause cavitation. If a filter is to be used on the inlet of a rail-mounted fuel pump, a filter rating of 160 microns MINIMUM should be used. • It takes approx. 1/2 lb. of gasoline to support 1 hp. This is commonly referred to as a .5 BSFC. You should always err in the safe direction of larger when sizing your injectors and fuel pump. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. COOLING SYSTEM CONSIDERATIONS/ COMMON PROBLEMS • Higher horsepower requires more cooling capacity. • When the fill point of the cooling system is not the highest point, air pockets are created. The air pockets then create hot spots, and the hot spots promote improper combustion, which can cause engine failure. • Improper pulley size makes the fan and water pump turn too slow or too fast. Production water pumps are normally run at 20% over engine speed and do not perform well over 5000 engine rpm. Underdrive pulleys generally reduce water pump speed to 85% of engine rpm and may not provide enough water flow to cool the engine. • The radiator must have enough area to dissipate the heat being generated by the engine. • If the fan size is too small, it will not move enough air across the radiator so it can properly dissipate the heat being generated. Fan shrouds increase the effectiveness of the fan significantly. • Radiator location can affect airflow through the radiator at different vehicle speeds. FLYWHEEL, CONVERTER AND TRANSMISSION PROBLEMS • Installing the wrong flywheel for the balance factor of the engine will cause vibration and eventually damage the engine. • Wrong length input shaft or “stack-up height” can force the crank forward, damaging the engine thrust bearing. • Improperly installing the torque converter can force the crank forward, damaging the engine thrust bearing. This is most commonly caused by improperly locating the torque convertor drain plug in the flexplate. • If the torque converter balloons, it can force the crank forward, damaging the engine thrust bearing and the transmission. Most high-performance torque converters have anti-ballooning features. • Damage to the thrust bearing can happen in seconds! MISCELLANEOUS PROBLEMS THAT CAN DAMAGE AN ENGINE • Dropping nuts, bolts, washers or foreign materials down the intake. We have seen this more than once. • Reusing an intake off an engine that had broken parts in a cylinder. The parts can get bounced up into the intake manifold, carburetor or air cleaner (pieces of piston or piston rings etc.). When you put your used intake on your new engine and start it, the pieces are drawn in and damage your engine. • Bead-blasting an EFI intake. You will NEVER get all of the blasting media out. When the engine is started, it draws the blasting media into the cylinders, destroying the engine. • Improperly torquing fasteners when installing new parts to your engine. Over-torquing of the intake manifold bolts to the cylinder head on 302 and 351W engines can cause head gasket sealing problems. • Installing distributor gears at the incorrect height, or using gears made of the wrong material. We have seen this a lot on remanufactured distributors as well as popular aftermarket manufacturers of distributor assemblies. Use cast iron gears for cast iron flat tappet cams, and steel gears for steel hydraulic roller cams. www.fordracingparts.com 95 CRATE ENGINES • Priming the oiling system before starting a new engine is crucial to engine life. This is important on initial start-up of a new engine and if a used engine has not been run for extended periods of time. • Does the oil pan have adequate capacity? Most performance vehicles require a 7 qt. minimum capacity. All engines will benefit from increased oil pan capacity. • Does the oil pan have proper oil control baffling for the vehicle’s braking, acceleration and cornering capabilities? Road Race cars need oil control in four directions: braking, acceleration, LH cornering and RH cornering. Drag race cars need oil control in two directions: braking and acceleration. Baffles must be designed to keep oil over the pickup screen at all times. • Is the pickup screen the proper distance from the bottom of the oil pan? If the oil pickup screen is too close to the bottom of the oil pan, it can cause cavitation. If it is too far away, it will cause the pump to draw air and minimize lubrication capacity. The pickup screen should be located .250" to .375" from the bottom of the pan. Does the design of the screen on the pickup tube create restrictions? We have seen some pickup tube screen designs that restrict oil flow as much as 75%. Wire mesh is good. Perforated metal is usually restrictive. Measure the wire size and calculate the flow area. Most aftermarket screens have less flow area than stock screens. • If using a remote oil filter mount or oil cooler, make sure that all of the components are large enough to eliminate any restrictions to oil flow. Many Cobra replica kit cars use components that are too restrictive. • Undersize oil lines commonly restrict oil flow. • The more bends/turns in an oiling system, the more restrictions are created. • Poorly designed remote filter mounts and adapters can create restrictions. • Be sure that the oil cooler flows enough oil to meet the engine’s requirements. • Never reuse a used oil cooler. Debris gets trapped and cannot be cleaned out. • Poorly designed oil filters can cause a restriction. • Many oil systems only flow one way. Connecting the remote oil filter or oil cooler lines backwards can cause engine damage/failure. • Avoid inductive crossfire created by improper plug wire routing. Separate plug wires on cylinders that fire in sequence. • Improper timing can damage pistons, rod bearings, head gaskets and many other engine parts. • Typical total mechanical advance timing at 4000 rpm for Ford Racing Performance Parts crate engines: 5.0L: 36° to 38°, 347/351: 34° to 36°, 392/460/514: 30° to 32°. CRATE ENGINES ENGINE DYNAMOMETER TESTING BASICS TYPES OF ENGINE DYNAMOMETERS There are many types of dynamometers for testing engines: Water Brake, Eddy-Current, Electric…just to name a few. Depending on availability and engine application, Ford Racing utilizes any of those mentioned. The basic function of each of these dynamometers (referred to as dynos from this point forward) is the same. Each applies a different method to absorb the energy output of the engine. The engine output is measured as torque (work) and power is calculated. The energy produced by the engine is absorbed by the dyno and eventually dissipated as heat. Dynos measure this engine output over a range of engine conditions that vary with speed and load. Temperature, pressures, air fuel ratio, water, oil, fuel and airflow measurements are elements of the test cell. The accurate measurement of these parameters is just as vital to good testing as the dyno itself. The test cell that houses a dyno can vary widely. Conditioned airflow, exhaust evacuation and fuel delivery must be adequate for the power level of the engine tested. Shortfalls in any of these areas can impact the integrity of the test. Electric dynos rotate a generator to absorb engine output; this yields an electric output that can be accurately measured. Typically, electric dynos can be used to spin a non-firing engine and measure pumping losses and friction. Those types of losses are difficult to ascertain in conventional dyno testing. METHODS OF TESTING Once the engine is installed in a test cell, and all desired operating parameters are instrumented, testing can begin. The dyno is capable of absorbing an infinite number of operating conditions ranging from idle to WOT (wide open throttle) and idle rpm to rpm’s beyond peak horsepower. In cases where the dyno is operated manually, the operator will set the rpm value via a controller. The operator then opens the throttle via a throttle actuator and applies load to the dyno. As the throttle is opened further, the dyno will control the rpm to the set point and the load will increase until full throttle is reached. Many types of testing exist for evaluating engine performance. Crate engine testing consists of power development, durability, idle stability, etc. POWER TESTING Ford Racing tests our crate engine offerings on any of the above-mentioned types of dynos. The type depends on test cell availability and type of engine application (street, sealed circle track, etc.). The engine is directly coupled to the dyno via a prop shaft. This type of testing yields brake power and torque. Test results are brake because measurements are taken directly from the crankshaft output. Water brake dynos absorb energy by pumping water through various orifices. Speed and load are controlled through a feedback loop of inlet and outlet valves. Water brake dynos are typically capable of absorbing very high engine outputs and rpm. Eddy-current dynos rotate a disc through a magnetic field. This magnetic field can be varied in strength to control the rpm of the disc. These dynos are desirable for engine development due to very good rpm control. 96 Techline (800) FORD788 Methods for performing power tests or power runs, vary by dyno facility and engine application. Acceleration tests (sometimes referred to as ramp tests) are controlled completely by dyno software through the dyno controller and throttle actuator. The rpm and transient times are programmed by the operator, and, once set, the controller takes the engine through the test. These tests typically do not let the engine stabilize at any given speed and data is collected throughout the ramp. For example: The test would begin at idle. Slowly the throttle will be opened and rpm controlled to the first chosen rpm test point. Eventually the throttle will reach WOT. From then, the rpm will increase at a given rate of rpm/time until the maximum test rpm is reached. Test data is recorded throughout the entire run. Finally the controller will close the throttle and return the engine to idle. Another method of power testing is the step method. This can be controlled manually or by an automated test where the dyno software controls the engine operation. The dyno controller is set to the first rpm test point and the throttle actuator is slowly opened to the full throttle point. The controller will maintain the rpm of the engine to the set point. In the manual mode, the operator will observe the data until stable and then record. In automated mode, the dyno will hold the throttle and rpm for a set period of time and automatically record the data. In either case, this testing provides good steady readings and makes for good repeatable runs. The above procedure will be repeated for all desired rpm test points. Results of power testing are used in the design of crate engine packages and for marketing/sales. For further information on interpreting results see article on “Correction Factors, Observed and Corrected Horsepower and Torque.” DURABILITY TESTING Durability testing varies by engine application and configuration. The type of engine and where it will be used can influence the type of durability testing greatly. For example, durability testing criteria for a sealed circle track crate engine will be determined by minimum and maximum track conditions. Durability testing for a street application crate engine will be determined by peak torque and horsepower for the given components. Testing conditions are typically WOT or high-load conditions and variable rpm to cover as wide of a range as possible. In short, durability testing criteria vary, but the goal is the same. The goal is to produce an accelerated wear condition that exceeds the normal application of the engine as designed. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CORRECTION FACTORS, OBSERVED AND CORRECTED HORSEPOWER AND TORQUE THE NEED FOR CORRECTED TEST RESULTS SOME DEFINITIONS Observed Operating Conditions are measured near the entry of the carburetor or inlet air system of the engine. These conditions include inlet air temperature, wet bulb temperature and actual barometric pressure. Observed Torque is the measured torque value while the engine is running. It typically uses a calibrated load cell. This load cell measures the work the engine is doing in real time. The observed torque value is then used in calculating the observed horsepower value. Observed Horsepower represents how fast the work (generated by the engine) is being done. This is calculated by the following formula (observed torque * rpm)/5252. Observed Barometric Pressure is atmospheric pressure measured near the engine air inlet. Observed Inlet Air Temperature is self explanatory. Wet Bulb Temperature is the temperature achieved by evaporating water into the observed inlet air. This is accomplished by using a wick with one end in a vessel containing water and the other connected to a thermometer or thermocouple. This reading is used in calculating vapor pressure, humidity and, ultimately, correction factor. is due to water vapor in the air. This yields corrected barometric pressure. BASIC ENGINE PERFORMANCE AND ATMOSPHERIC CONDITIONS SAE J607 This formula utilizes the observed inlet air temperature and wet bulb readings to calculate saturated, current and corrected vapor pressure. The corrected vapor pressure is subtracted from the observed barometric pressure. It is subtracted because the pressure is due to water vapor in the air. This yields corrected barometric pressure. The conditions for correction are 60° F and barometric pressure of 29.92 inches of mercury. Once the corrected barometric pressure is calculated and the observed inlet air temperature is known, those values are plugged into the following formula. The correction factor formula is: Engines utilize fuel and air, and apply a form of combustion to convert the power stored in fuel into usable work. The air contains oxygen; this is the element that supports the combustion process. Cool dry air contains more oxygen molecules within a constant volume and pressure. As barometric pressure increases, additional oxygen molecules are present (maintaining a constant volume). For example, if an engine was tested on a cool January day where the barometric pressure was relatively high, observed engine performance will be better than the same engine tested on a hot, muggy August day when a storm was coming in. Also, engine tests performed in higher altitudes have lower observed barometric pressure and engine performance is lower. CORRECTION FACTORS Several correction factors exist and this article will deal with two of them. (1) SAE J1349, June 1990 Data corrected to 77° F and 29.31 in Hg 85% efficiency. (2) SAE J607, Data corrected to 60° F and 29.92 in Hg. SAE J1349 This formula utilizes the observed inlet air temperature and wet bulb readings to calculate saturated, current and corrected vapor pressure. The corrected vapor pressure is subtracted from the observed barometric pressure. It is subtracted because this pressure *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. The conditions for correction are 77° F and barometric pressure of 29.31 inches of mercury. Once the corrected barometric pressure is calculated and the observed inlet air temperature is known, those values are plugged into the following formula. The correction factor formula is: C.F. = 1.18 #[(29.31/Corrected Barometric Pressure) * {(Observed Inlet Air Temp+460)/ (537)} ^.5]-.18 C.F. = [(29.92/Corrected Barometric Pressure) ^1.2 * {(Observed Inlet Air Temp+460)/ (520)} ^.6] SUMMARY Once a correction factor is calculated, the observed numbers are multiplied by it. These are the “corrected values.” Undoubtedly, the best scenario is to test under the exact same conditions each time. If that is not achievable, a good rule of thumb is that engines corrected to the SAE J607 standard will yield corrected torque and power numbers approximately 4% higher than those corrected to SAE J1349. Unfortunately, SAE J607 conditions are not very realistic. The most commonly accepted standard is the SAE J1349. This corrects to a more practical set of atmospheric conditions and utilizes coefficients to compensate for an 85% mechanical efficiency. Please note temperature is converted Rankin degrees in both formulas. www.fordracingparts.com 97 CRATE ENGINES The main reason for a correction factor is the ability to compare testing performed under different atmospheric conditions. The correction factor will contain a temperature, barometric pressure and an efficiency percentage. The temperature and barometric pressure have significant impact on the performance of an engine. Also, to a lesser degree, humidity can affect the performance. Some dyno facilities have controlled atmospheric chambers to condition air to a desired temperature, humidity and barometric pressure. These test cells are very sophisticated and usually booked with production, emission, cold start and hot test work. The test cells with these chambers can easily cost several hundred thousand. Considering these challenges, it becomes evident that there is a need to be able to test engines under observed operating conditions and correct the results to a standard set of conditions. Corrected Torque is the measured torque times the correction factor. Corrected Horsepower is the measured horsepower times the correction factor. Corrected Barometric Pressure is the observed barometric pressure minus the corrected vapor pressure. Standard Barometric Pressure is stated in the definition of the correction factor. Load Cell is an electronic device capable of measuring force. Brake Horsepower is useful power determined from the engine (no other power train losses); can be observed or corrected. ENGINE BLOCKS STOCK 302 1969-70 BOSS 302 STOCK 302 1969-70 BOSS 302 FR BOSS 302 Main caps 2-bolt cast iron 4-bolt cast iron (2,3,4) 4-bolt nodular iron machined splayed (2,3,4) Siamese bore No No Yes with engineered cross drilling Freeze plugs Press Screw in tapered pipe thread Screw in O-ring sealed straight thread Material Cast iron Cast iron Diesel grade heat treated cast iron Head bolts 7/16" 7/16" 1/2" Recommended Max. Bore 4.030" 4.030" 4.125" Front oil crossover No for lifter galley No Yes Main bolts 7/16" 7/16" (all) 3/8" outer (2,3,4) 1/2" (all) 3/8" outer (2,3,4) Oil galley plugs Pipe thread and press in Pipe thread Screw in O-ring sealed straight thread Hydraulic roller compatible Yes No Yes Clutch cross shaft pivot hole No Yes Yes Rear main seal 1-piece 2-piece 1-piece CID capacity 347 347 363 98 Techline (800) FORD788 FR BOSS 302 Need Ford technical information on Performance Parts? Call the Techline (800) FORD788 or visit our website at www.fordracingparts.com *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. BOSS 302 CYLINDER BLOCK M-6010-BOSS302* The legend is reborn with this all new 302 block! Stronger than the original! • 4.125" bore capacity, finished at 3.990" to 3.995" rough bore • 8.2" deck height, finished at 8.200" plus .010" to .015" • Maximum recommended stroke 3.400" • Splayed 4-bolt main on 2, 3, 4, main caps • 2-bolt main on first and fifth main caps • Main bearing bores finished to low limit • Finished lifter bores • Machined to accept factory roller lifter guides and lifter guide retainer • Fits factory Mustang oil pan with custom oil pickup tube • Revised oiling and cooling system passageways • Siamese bore with drilled coolant crossover holes • Increased bulkhead material • Threaded core and galley plugs (straight thread port plugs with O-ring) • ½" head bolts M-6065-BOSS recommended with M-6049-X306 heads • Uses common OD cam bearings M-6261-J351/R351 • Unique cam plug M-6026-S351 included • M-6051-S331 or M-6051-CP331 head gasket recommended • Weighs approximately 175 lbs. • Great price and value • The foundation for 8.2" deck projects ENGINE COMPONENTS BOSS 302 OIL PICKUP TUBE M-6622-BOSS302* • • • • For use with M-6010-BOSS302 block Clears 4-bolt main caps Fits stock Fox body Mustang pans Fits FISE pans used on 1991-95 Mustangs 351 ALUMINUM RACE BLOCK M-6010-C450* 7075 Aluminum Main Caps M-6010-C451* Billet Steel Main Caps OIL GALLERY RESTRICTOR KITS M-6799-A302* 289/302/351W M-6799-R351* 351 Ford Racing • 4" to 4.125" bore capacity • Centrifugally cast liners • All aluminum water jacket and oil galley plugs • 9.2" deck height • 4-bolt main journals one through five • Dry sump design • 2.750" main bearing journals • Enclosed cam tunnel • Light-weight at only 92 lbs. • Recommended for Dirt late model, Sprint, 410 Sprint • Use with M-6701-B351 crankshaft seal, M-6269-C450 cam thrust retainer, M-6268-C450 timing chain and gear set, M-6059-C450 timing cover, and M-6261-C450 cam bearings M-6010-R351/R352/ S351/V351/W351 Increases oil flow to main bearings by reducing oil to valve train. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. M-6799-A302 shown www.fordracingparts.com 99 ENGINE BLOCKS 351 SIAMESE BORE WET SUMP BLOCK M-6010-V351* 9.200" Deck Height 351 SIAMESE BORE DRY SUMP BLOCK M-6010-R452* 9.200" Deck Height • Cast iron block with 4-bolt main caps on journals 2, 3, 4, 5 and strengthened structural sections • Nodular iron main caps • Can be bored/stroked to produce 427 cu. in. • Siamese cylinder bores • Bore range from 4.000-4.125" • Wet sump oiling design • 2.749" main journal diameter (stock 351C size) • Weighs approximately 190 lbs. • For professional competition (Circle Track, Drag Racing) • Semi-finished lifter bores and main bearing bores—must be honed to fit • Uses common OD cam bearings M-6261-J351/R351. See page 102 • Requires cam plug M-6026-S351 included • • • • • • • • • • • • • 351 SIAMESE BORE WET SUMP BLOCK M-6010-W351* 9.500" Deck Height 351 “SPORTSMAN” WET SUMP BLOCK M-6010-C58* • Cast iron block with 4-bolt main caps on journals 2, 3, 4, 5 and strengthened structural sections • Nodular iron main caps • Can be bored/stroked to produce 454 cu. in. • Siamese cylinder bores • Bore range from 4.000-4.125" • Wet sump oiling design • 2.749" main journal diameter (stock 351C size) • Weighs approximately 205 lbs. • For professional competition (Circle Track, Drag Racing) • Semi-finished lifter bores and main bearing bores—must be honed to fit • Uses common OD cam bearings M-6261-J351/R351. See page 102 • Requires cam plug M-6026-S351 included • • • • • • • • • 4.180" Overbore Capacity Cast iron block with 4-bolt main caps and strengthened structural sections Nodular iron main caps Can be bored/stroked to produce 434 cu. in. Siamese cylinder bores Bore range from 4.000-4.180" Dry sump oiling design 2.248" main journal diameter (stock 302 size) Weighs approximately 190 lbs. For professional competition (NASCAR) Semi-finished lifter bores and main bearing bores—must be honed to fit Uses common OD cam bearings M-6261-J351/R351. See page 102 Requires cam plug M-6026-S351 included Cast iron block with nodular iron 2-bolt main caps Can be bored/stroked to produce 427 cu. in. Siamese cylinder bores—cross drilled for cooling Bore range from 4.000-4.030" Wet sump oiling design 3.000" main journal diameter Weighs approximately 200 lbs. Uses common OD cam bearings M-6261-J351/R351. See page 102 Requires cam plug M-6026-S351 included NOTE: Siamese blocks are solid casting between the cylinder bores. There are no water passages between them. This is done to increase the strength of the block. 100 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 460 SIAMESE BORE WET OR DRY SUMP BLOCK M-6010-A460* 10.322" Deck Height • • • • • • • • • Cast iron block with 4-bolt main caps on journals 2, 3, and 4 Nodular iron main caps Can be bored/stroked to produce 598 cu. in. Siamese cylinder bores Bore range from 4.360-4.600" Wet sump oiling design 3.000" main journal diameter Weighs approximately 290 lbs. High-strength block for professional competition (Circle Track, Drag Racing) 460 PRO STOCK BLOCK M-6010-A500* 9.300" Deck Height • • • • • • • • Cast iron block with 4-bolt main caps Billet steel main caps Can be bored/stroked to produce 500 cu. in. Siamese cylinder bores Bore range from 4.360-4.625" Dry sump oiling design 2.749" main journal diameter High-strength block for professional competition (Built specifically for Pro-Stock Drag Racing) • Semi-finished block 351 FORD RACING NON-SIAMESE BORE WET OR DRY SUMP BLOCK M-6010-N351* 9.500" Deck Height • • • • • • • • • • • • • • • • • • • • Cast iron block with 4-bolt main caps on journals 2, 3, and 4 Nodular iron main caps Can be bored/stroked to produce 408 cu. in. Non-siamese cylinder bores Bore range from 4.000-4.030" Wet sump oiling design 2.749" main journal diameter Weighs approximately 200 lbs. High-strength block for professional competition (Circle Track, Drag Racing) Semi-finished main bearing bores and lifter bores—must be honed to fit ENGINE COMPONENTS 351 FORD RACING NON-SIAMESE BORE WET OR DRY SUMP BLOCK M-6010-M351* 9.200" Deck Height Cast iron block with 4-bolt main caps on journals 2, 3, and 4 Nodular iron main caps Can be bored/stroked to produce 434 cu. in. Non-siamese cylinder bores Bore range from 4.000-4.030" Wet sump oiling design 2.749" main journal diameter Weighs approximately 205 lbs. High-strength block for professional competition (Circle Track, Drag Racing) Semi-finished main bearing bores and lifter bores—must be honed to fit NOTE: Siamese blocks are solid casting between the cylinder bores. There are no water passages between them. This is done to increase the strength of the block. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 101 ENGINE BLOCKS ENGINE GROUP PART NUMBER 302 FORD M-6010-BOSS302* 351 FORD M-6010-C450/C451 351 FORD M-6010-C58* 351 FORD M-6010-M351* 351 FORD M-6010-N351* Description/Intended Usage Professional Competition Professional Competition Amateur Competition Professional Competition Professional Competition Block Material Cast Iron Aluminum Cast Iron Cast Iron Cast Iron Nominal Deck Height 8.206" 9.200" 9.500" 9.200" 9.500" CID Capacity 363 427 408 408 434 Cylinder Design Siamese Siamese Siamese Non-Siamese Non-Siamese Cylinder Bore Range 4.000-4.125" 4.000-4.125" 4.000-4.030" 4.000-4.030" 4.000-4.030" Oil Sump Design Wet Dry Wet Wet Wet 2.7490" Crankshaft Journal Diameter 2.2480" 2.750" 3.0000" 2.7490" Main Cap Bolts Four on 2,3,4 Four Two Four on 2,3,4 Four on 2,3,4 Bearing Cap Material Nodular Iron C450 7075 Aluminum/ C451 Billet Steel Nodular Iron Nodular Iron Nodular Iron Recommended Max. Stroke 3.400" 4.00" 4.000" 4.000" 4.250" Rear Crankshaft Seal Type One Piece One Piece One Piece One Piece One Piece Cam Bearing Design M-6261-R351 Common Journal Dia. Cam Req’d. M-6261-J351 Standard Cam M-6261-C450 Common Journal Dia. Cam Req’d. M-6261-R351 Common Journal Dia. Cam Req’d. M-6261-J351 Standard Cam Std. Std. Oil Filter Mount Block Remote Block Block Block Hyd. Roller Cam. Compatible Yes No Yes – – Cam Plug ENGINE GROUP PART NUMBER M-6026-S351 351 FORD M-6010-R452* – 351 FORD M-6010-V351* M-6026-S351 351 FORD M-6010-W351* – 460 FORD M-6010-A460* – 460 FORD M-6010-A500* Description/Intended Usage Professional Competition Professional Competition Professional Competition Professional Competition Professional Competition Block Material Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Nominal Deck Height 9.200" 9.200" 9.500" 10.322" 9.300" CID Capacity 427 427 454 598 537 Cylinder Design Siamese Siamese Siamese Siamese Siamese Sleeves Cylinder Bore Range 4.000-4.180" 4.000-4.125" 4.000-4.125" 4.360-4.600" 4.360-4.625" Oil Sump Design Dry Wet Wet Wet Dry 2.749" Crankshaft Journal Diameter 2.248" 2.749" 2.749" 3.000" Main Cap Bolts Four Four on 2,3,4,5 Four on 2,3,4,5 Four on 2,3,4 Four Bearing Cap Material Nodular Iron Nodular Iron Nodular Iron Nodular Iron Billet Steel Recommended Max. Stroke 4.000" 4.000" 4.250" 4.500" 4.000" Rear Crankshaft Seal Type One Piece One Piece One Piece Two Piece Two Piece Cam Bearing Design M-6261-R351 Common Journal Dia. Cam Req’d. M-6261-J351 Standard Cam M-6261-R351 Common Journal Dia. Cam Req’d. M-6261-J351 Standard Cam M-6261-R351 Common Journal Dia. Cam Req’d. M-6261-J351 Standard Cam Std. Roller Oil Filter Mount Remote Remote Remote Block Remote Hyd. Roller Cam Compatible Yes Yes Yes – – Cam Plug M-6026-S351 M-6026-S351 M-6026-S351 – – CAMSHAFT BEARINGS M-6261-R351* 351 Ford Racing Blocks Common outer and inner diameter replacement cam bearings for use in M-6010-R302/S302/ R351/R352/S351/V351/W351/R451/R452/R453/ C58/BOSS302. Use with custom ground common OD camshaft. M-6261-J351* Common outer diameter service replacement cam bearings for Ford Racing 302 and 351 aluminum cylinder blocks and M-6010-R302/S302/R351/R352/ S351/V351/W351/R451/R452/R453/C58/BOSS302 cast iron blocks. Use with standard camshaft. M-6261-R351 shown 102 Techline (800) FORD788 CAMSHAFT BEARINGS – ROLLER (SOLD IN ENGINE SETS) These low-friction, roller camshaft bearings only require oil “splash” lubrication. Oil feed holes can be totally blocked off, to reduce oil aeration and windage losses. Engine block must be machined to accept bearing size shown in chart. NOTE: The 351 cam journals are NOT production dimensions. The 429-460 dimensions are production. These roller bearings require an SAE 8620 steel camshaft. PART NUMBER APPLICATION M-6261-C351* 302/351W M-6261-A460* M-6261-D351* 351 Ford Racing 429/460 Wedge 351 Ford OD DESCRIPTION ID DESCRIPTION LENGTH 2.283" 2.051" 0.625" 2.500" 2.125" (1-4) 2.48" (1-4) 2.165" ➀ (5) 2.28" (5) 1.969" NOTES: ➀ Requires special camshaft retainer plate sold separately. 0.625" 0.787" *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CYLINDER HEADS “TURBO-SWIRL” ALUMINUM CYLINDER HEADS M-6049-X306* Complete Head (64 cc Chamber) M-6049-X307* Complete Head (58 cc Chamber) THE FAST, EASY WAY TO BOLT ON 65 HORSEPOWER! TRUE BOLT-ON PERFORMANCE • For use on 289/302/351 Windsor-style • High-quality original equipment style 356-T6 engines aluminum castings, machining and components • Improved air flow over original GT-40 • Each aluminum head weighs approximately 22 lbs. aluminum heads – approximately 25 lbs. lighter than each cast iron • Intake flows approximately 240 cfm at GT-40 head .550" lift (at 28" of H20) • These GT-40 style heads use AGSF-32C spark plugs • Exhaust flows approximately 170 cfm at • Each GT-40X head is leak tested prior to assembly .500" lift (at 28" of H20) • Assembled with M-6507-J302 intake valves, M• Machined for 1.94" intake and 1.54" 6505-G302 exhaust valves, M-6513-A50 valve exhaust valve diameters springs. The valve springs are compatible with all • Unlike some aftermarket heads our GT-40 Ford Racing roller camshafts heads use either GT-40 or aftermarket • Designed to be used on the M-6010-BOSS302 block performance: intake manifolds, headers and with head gasket M-6051-CP331 valve covers • Intake port volume 178 cc, exhaust port INSTALLATION NOTES volume 62 cc • Will not fit 1986 5.0L with flat-top pistons unless • High temperature exhaust valve seats. pistons are notched for valve relief Thick deck for improved sealing, increased • Must use head bolt kit M-6065-D289 to install section thickness in critical areas for porting cylinder heads on 289/302 blocks or head bolt and and webbed rocker bosses for improved head gasket kit M-6051-A50 and intake gasket strength. Designed for bolt-on rocker M-9439-A50/A51 arms, machined for tapered seat spark • Check rocker arm clearance to valve springs with plug or gasketed. Compatible with Ford production rocker arms Racing intakes, headers and valve train • Check your intake manifold for port match; not all components. Can be machined for diagonal intakes are compatible due to the tall high-flow ports exhaust header flange mounting • Must use M-9439-A50 intake gasket • • • • • Cast from prime A356 T6 aluminum Fits 5.0L/5.8L Windsor engines Heads are cast with high-flow ports 20 degree inline valves Suggested valve sizes: 2.02" intake and 1.60" exhaust • Requires competition valve job and bowl blending • Steel alloy intake and exhaust valve seats installed (no valve job) • Manganese-bronze valve guides installed with semi-finished ID • 63cc CNC’d combustion chamber • Intake port volume as cast: 204 cc • Exhaust port volume as cast: 85 cc • Bare head weighs 27 lbs. • Accepts both tapered seat and gasket style 14 mm spark plugs (Motorcraft AGSP-32-PP, Autolite 3924, 3925) • Requires guide plate M-6566-Z304D (not included) • Requires 7/16" screw-in studs (not included) • Requires M-6564-F351 roller rocker arms (not included) • Uses M-6505-B304 exhaust valve and M-6507-A304 intake valve (not included) • Raised exhaust port exit, custom headers may be required ASSEMBLED HEAD FEATURES • Premium stainless steel 2.02" intake M-6507-A304 and 1.60" M-6505-B304 exhaust valves *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 130lbs @ 1.800", 293 lbs. @ 1.200" and CB @ 1.085" • Includes laser cut guide plates M-6566-Z304D for use with 5/16" pushrods and 7/16" rocker studs • Requires M-6564-F351 roller rocker arms (not included) • Check piston to valve clearance including radial valve clearance before installing these cylinder heads on your engine • Cork valve cover gasket recommended PORTED HEAD FEATURES • CNC ported version of M-6049-Z304D cylinder head to increase flow on intake and exhaust • Intake and exhaust airflow increased approximately 10% • Bare casting TYPICAL AIRFLOW (@ 28" OF H2O DEPRESSION) WITH 2.02 INTAKE VALVE, 1.60 EXHAUST VALVE AND COMPETITION VALVE JOB LIFT INTAKE AS CAST FLOW CNC EXHAUST AS CAST FLOW CNC .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 31.1 64.6 103.0 135.3 167.0 199.0 227.2 245.2 259.8 271.9 277.3 34.4 68.7 108.7 148.7 187.0 225.3 251.7 278.1 296.1 314.1 319.7 26.4 55.8 84.6 113.3 146.8 171.6 190.2 200.4 207.2 212.8 218.1 30.5 61.0 85.7 110.4 134.6 158.8 175.2 191.7 206.6 221.5 227.7 www.fordracingparts.com 103 ENGINE COMPONENTS FORD RACING PERFORMANCE PARTS “Z” ALUMINUM HEAD M-6049-Z304D* Bare Head BARE HEAD FEATURES • Uses M-6513-BH Beehive style valve springs M-6049-Z304DA* Complete Head • This cylinder head was designed using with machined retainers and machined valve locks. M-6049-Z304P* CNC Ported Head Solid Modeling Technology Most hydraulic cams can be used with these springs. CYLINDER HEADS FORD RACING “SPORTSMAN” SHORT TRACK CAST IRON CYLINDER HEADS M-6049-N351* Bare Head (64 cc Chamber) • For use in NASCAR Late Model Stock, I.M.C.A., D.I.R.T., and most other stock car sanctioning groups on 351W engines • Much improved air flow over previous E351 heads • Developed by Ford Racing with the help of Larry Lackey and Robert Yates of Robert Yates Racing • Machined for 2.02" intake and 1.60" exhaust valve diameters • Intake and exhaust valves have been moved .070" to unshroud the intake valve • Valve angle changed from 20˚ to 10˚ to further improve air flow • Intake port volume 195 cc, exhaust port volume 78 cc nominal • Accepts stud girdle M-6569-C351 • Thick deck and reinforced structure for improved sealing, increased section thickness in critical areas and webbed rocker bosses for improved strength. Designed for stud mount rocker arms. Compatible with stock and Ford Racing intakes • These heads use .708" reach tapered seat spark plugs depending on application INSTALLATION NOTES • Requires M-6564-F351/J351 roller rocker arms with offset intake valve pushrod cup • Unique header flange required • Must use head bolt kit M-6065-C351 to install cylinder heads Parts to assemble M-6049-N351*: M-6566-D351* Pushrod guideplate (pkg. of 8) M-6527-C311* Rocker arm studs (pkg. of 16) M-6505-A351* High-flow stainless steel exhaust valve M-6507-A351* High-flow stainless M-6514-A50* steel intake valve Retainers (pkg. of 16) HIGH-PORT HEAD M-6049-SC1* • • • • • • • • • • • • • Unfinished combustion chambers, typical finished volumes range from 40 cc to 70 cc Raised intake and exhaust runners for better airflow and greater power Fits 302 and 351 Ford Racing blocks Used for Drag, Sprint Car and Circle Track Racing Intake and exhaust runner raised .400" over “Yates” C3 head for better flow characteristics Intake valves up to 2.180" diameter, 5.685" long Exhaust valves up to 1.625" diameter, 5.565" long Redesigned integral rocker pad for greater stiffness Uses M-9424-W352 intake manifold with 9.200" deck block Uses Motorcraft AGS-Series spark plugs Cylinder head comes semi-finished. Machining does not include valve seat bores Must be ported Bronze guides and valve seats included HIGH-PORT NASCAR HEAD M-6049-D3* M-6049-D35* Without seats, guides or pushrod holes • • • • • • • • • • • 104 Fits 5.0L and 5.8L Ford Racing blocks Raised intake and exhaust ports Used primarily in NASCAR and ARCA racing Intake and exhaust runners raised .400" over “Yates” C3 head Capable of 400 CFM intake, 267 CFM exhaust Accepts intake valves up to 2.180" diameter, exhaust valves up to 1.625" diameter Integral rocker pad for greater stiffness Cylinder head comes semi-finished. Combustion chamber and ports, unfinished Bronze guides and valve seat inserts included (not installed) Intake manifold mounting bolt holes 90° to mounting flange Use with M-9424-D451 or D452 intake manifold Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CYLINDER HEADS SUPER COBRA JET CYLINDER HEADS M-6049-SCJ* Bare Head M-6049-SCJA* Assembled Head for 429-460 Engines M-6049-SCJB* Assembled Head for 514 Engines • Revised valve angles and locations to reduce cylinder wall shrouding and improve flow • Redesigned combustion chambers to accommodate the more centrally located valves • Uses same valves, valve springs, retainers and standard 7/16" stud mounted roller rockers as Ford Racing 429 Cobra Jet cylinder heads. Requires new pushrod guide plates (M-6566-SCJ) and new pushrods, M-6565-P460 or R460 • Standard Cobra Jet intake and exhaust manifolds bolt on • Current valve covers fit • 2.200" intake valve, 1.76" exhaust valve • Flows approximately 330 cfm intake and 225 cfm exhaust • 72 cc combustion chambers • 290 cc intake runner, 148 cc exhaust runner • 25-50 hp increase over Ford Racing aluminum Cobra Jet heads depending on displacement and camshaft • The best street/strip Ford big block cylinder head on the market today! • Uses Motorcraft AGSP series spark plugs NOTE: If replacing Ford Racing or production Cobra Jet heads, new intake valve notches are required. ENGINE COMPONENTS VALVE TRAIN COMPONENTS INSTALLED IN M-6049-B429/SCJA* “COBRA JET” AND “SUPER COBRA JET” CYLINDER HEADS PART NUMBER DESCRIPTION NOTES M-6507-B429* M-6505-A429* M-6536-E351 M-6513-A351 Intake Valve Stainless Steel (2.20" dia.) Exhaust Valve Stainless Steel (1.76" dia.) Valve Spring Seat for CJ 1.460" OD springs Valve Springs ➀ For use with Ford Racing hydraulic camshaft M-6250-A443. Spring load: 130 lbs.–closed, 375 lbs.–open. For other camshafts, follow manufacturer’s recommendations. M-6514-A50 M-6518-B351 M-6527-C311 M-6566-SCJ* M-6536-SCJ* Valve Spring Retainers 7° Retainers Valve Spring Keepers Use with 7° retainers. Rocker Arm Studs 7/16" with or without stud girdle. (Engine Set) Pushrod Guide Plates for SCJ Flat design for .375" dia. pushrods. (Engine Set) Valve Spring Seat for SCJ Spring OD 1.460", Cup OD 1.680", Cup ID .577", Material machined steel, Thickness .062" NOTE: ➀ CJ cylinder head accepts valve springs with up to 1.625" OD and installed height of 1.900". 2.3L ALUMINUM CYLINDER HEAD M-6049-A230* Competition only aluminum cylinder head M-6049-E23A* D-Port aluminum head Available from: Esslinger Engineering 14320 Potrero South El Monte, CA 91733 Telephone: (626) 444-4919 4.9L 6-CYLINDER RACE HEAD M-6049-I49* High-flow aluminum drag race only cylinder head for 4.9L inline 6-cylinder. No water passages in cylinder head. NHRA accepted for Competition Eliminator as OEM generally available. Order through Alan Johnson Cylinder Heads (805) 922-1202. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 105 CYLINDER HEADS FORD RACING 460 “SPORTSMAN” WEDGE-STYLE CYLINDER HEADS M-6049-C460* • For use with M-6010-A460 Ford Racing cylinder block • Used for professional competition and serious “Sportsman” racers • Made from 356-T6 aluminum, with bronze valve guides, and a premium valve seat insert material compatible with titanium valves • Valve angles are 7.5˚ intake, 8.0˚ exhaust with no side cant • Raised intake and exhaust ports • 65 cc wedge-style combustion chamber • 4.600" recommended bore size (4.500" minimum) • 2.450" intake, 1.900" exhaust recommended diameters • Port and combustion chamber design based on Ford Racing 351 “Yates” cylinder head NHRA PRO STOCK CYLINDER HEAD M-6049-E460* EFI HEAT SPACER M-9486-A51* Stock 5.0L Manifold - .5" M-9486-A52* GT-40 Manifold - .5" M-9486-A53* GT-40 Manifold - 1" thick Stock 5.0L • Made from 356-T6 Aluminum • Raw casting GT-40 for clearance with M-6582-E302P Valve Covers New and improved quality, made in the USA. CNC machined from Westinghouse. Type C phenolic material fits between the upper and lower manifolds to help dissipate heat and significantly increase performance. Includes longer bolts. EFI UPPER-TO-LOWER INTAKE MANIFOLD GASKET M-9486-A50* GT-40 upper to lower gasket. Fits M-9424-Z51 or M-9424-Z51P intake manifold. 106 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. ELECTRONIC FUEL INJECTION COBRA EFI INTAKE MANIFOLD “REPLICA” M-9424-Z51P* COBRA EFI INTAKE MANIFOLD “REPLICA” M-9424-Z51* • Replica of the production 1993 Cobra intake manifold • Airflow is good up to 350+ horsepower • Kit includes upper intake manifold and lower intake manifold • Fits 1986-93 5.0L Mustangs • Polished version of the M-9424-Z51 • Replica of the production 1993 Cobra intake manifold • Airflow is good up to 350+ horsepower • Kit includes upper intake manifold and lower intake manifold • Fits 1986-93 5.0L Mustangs HI-FLOW 70MM THROTTLE BODY M-9926-D462* 1996-04 Mustang • Bolts to stock intake manifold • Significant power increase EFI HI-FLOW POLISHED EGR SPACER FOR 1987-93 MUSTANG • M-9474-P65E* For 65 mm Throttle body • M-9474-P70E* For 70 mm Throttle body • M-9474-P75E* For 75 mm Throttle body OFF-ROAD GT-40 INTAKE MANIFOLD M-9461-B50* • This polished EGR spacer has been machined to be compatible with the Ford Racing throttle bodies • Can be used with either 1987-93 production or Ford Racing EFI manifolds • Requires minor modification to production upper intake manifold to achieve optimum results EFI HI-FLOW POLISHED THROTTLE BODY FOR 1987-93 MUSTANG • M-9926-P65E* 65 mm Polished • M-9926-P70E* 70 mm Polished • M-9926-P75E* 75 mm Polished EFI HI-FLOW POLISHED THROTTLE BODY FOR 1994-95 MUSTANG • M-9926-P65L* 65 mm • M-9926-P70L* 70 mm • M-9926-P75L* 75 mm • • • • • • • • Fits 1987-93 5.0L Mustangs Requires no changes to cables, wiring or connectors Includes throttle position sensor Use with appropriate size EGR spacer M-9474-P65E, M-9474-P70E or M-9474-P75E ENGINE COMPONENTS • Off-road use only • No provisions for 1986-93 EGR • Number three runner drilled and tapped for air charge sensor • Lower manifold only Fits 1994-95 5.0L Mustangs Requires no changes to cables, wiring or connectors Throttle position sensor not inlcuded Requires minor modification to production upper intake manifold to achieve optimum results M-9926-P65E M-9926-P70E M-9926-P65L shown EGR SPACER-TO-INTAKE MANIFOLD GASKET M-9464-A50* M-9926-P75E This gasket is manufactured with a larger 70 mm bore diameter to accommodate the Ford Racing 65 mm throttle body and EGR spacer. Fits between EGR spacer and intake manifold. If you have ever tried to modify the production gasket to fit a larger spacer, you will truly appreciate these pieces. Also use with M-9927-A50 adapter. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 107 INTAKE MANIFOLDS 289/302 DUAL PLANE INTAKE MANIFOLD M-9424-F302* 289/302 POLISHED DUAL PLANE INTAKE MANIFOLD M-9424-A302P • • • • • For use with 8.206" deck height block and inline valve heads 4.375" at the front of the carburetor pad, 5.250" at the rear Dual plane intake 1500-6000 rpm range For use with mid-rpm small block application, great for street cars and mild race engines • Excellent fuel distribution • Does not fit “Z” or the GT-40 “X” heads • • • • • CHROME APPEARANCE 289/302 “PERFORMER RPM” INTAKE M-9424-E302C* 289/302 SINGLE PLANE “VICTOR JR.” INTAKE MANIFOLD M-9424-D302* • Same as M-9424-E302 with powdercoat for chrome appearance • For use with 8.206" deck height block and inline valve heads • 4.30" at the front of the carburetor pad, 5.50" at the rear • Dual plane “Performer RPM” style intake • 1500-6500 rpm range • For use with mid-rpm small block application, great for street cars and mild race engines • For use with 8.206" deck height block and inline valve heads • 5.35" at the front of the carburetor pad, 5.42" at the rear • Single plane “Victor Jr.” style intake 3500-8000 rpm range • For use with high-rpm small block application 351W SINGLE PLANE “VICTOR JR.” INTAKE MANIFOLD M-9424-V351* 429/460 SINGLE PLANE “VICTOR JR.” INTAKE MANIFOLD M-9424-G429* • For use with 9.500" deck height block and inline valve heads • 5.75" carburetor pad • Single plane “Victor Jr.” style intake 3500-7500 rpm range • For use with high-rpm small block application 429/460 SINGLE PLANE DOMINATOR FLANGE INTAKE MANIFOLD M-9424-H429* Fully polished for that show car look For use with standard 302 cylinder blocks and heads 4.20" at the front of the carb pad, 5.50" at the rear Dual plane intake 1500-6500 rpm range Great for street rods, mild race engines and any mid-rpm 289-302 application • For use with 10.322" deck height block and production or Ford Racing CJ/SCJ heads • 6.30" carburetor pad • Single plane “Victor Jr.” style intake 3500-8000 rpm range • For use with high-rpm big block application 429/460 DUAL PLANE INTAKE MANIFOLD M-9424-J429* • For use with 10.322" deck height block and production or Ford Racing CJ/SCJ heads • For use with 10.322" deck height block and • 5.84" carburetor pad height production and Ford Racing CJ/SCJ heads • Dual plane "Performer RPM" style intake • 6.30" carburetor pad with standard Holley carburetor flange • Single plane “Victor” style intake • 1500-6500 rpm range 3500-8000 rpm range with Dominator carburetor flange • For use with high-rpm big block application 108 Techline (800) FORD788 460/460 FORD RACING SINGLE PLANE INTAKE MANIFOLD M-9424-C460* • For use with 10.322" deck height block and M-6049-C460 “wedge” race heads • 8.64" carburetor pad height • High-rpm power • For use on drag race engines *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 351 FORD RACING SINGLE PLANE D3 NASCAR RESTRICTOR INTAKE M-9424-D451* • For use with 9.200" deck height block and M-6049-D3 heads and restrictor plate • 6.40" carburetor pad • Single plane intake used for NASCAR restrictor plate rule. • With extra material for runner modification 351 FORD RACING SINGLE PLANE INTAKE MANIFOLD M-9424-D452* • The latest intake manifold for NASCAR • Fits 9.200" deck height blocks with M-6049-D3/D35 heads • Weighs 19 lbs. with generous wall thickness for custom porting • 4.00" depth carb. flange to plenum floor • Tuned for substantial power improvement over 8500 rpm compared to other aftermarket manifolds • Does not have a valley tray (for weight reductions) • Replaces M-9424-W351 INTAKE MANIFOLD – ALUMINUM WITH HOLLEY 4V BOLT PATTERN • The latest intake manifold for NASCAR • Fits 9.200" deck height blocks with M-6049-D3/D35 heads • Weighs 19 lbs. with generous wall thickness for custom porting • 4.00" depth carb. flange to plenum floor • Tuned for substantial power improvement over 8500 rpm compared to other aftermarket intakes • Does not have valley tray (for weight reductions) • Accommodates Busch and Truck tuning ranges Ford Racing offers 4V single plane and dual plane intake manifolds in low and high designs. Note that the 351 Ford Racing engine block is available in two deck heights (9.200" and 9.500"). The carburetor pad dimensions are listed to assist in calculating underhood clearance. Front PART NUMBER ENGINE BLOCK DECK HEIGHT M-9424-C460* M-9424-D302* M-9424-F302* M-9424-G429* Ford Racing 460 10.322" CYLINDER HEADS Carburetor Pad Dimensions CARBURETOR PAD DIMENSIONS “A” “B” TYPE/NOTES M-6049-C460 8.64" 8.64" Single plane single 4V 289/302 8.206" Inline Valves 5.35" 5.42" Single plane, “Victor Jr.” 3500-8000 rpm range 302 8.200" Inline Valves 4.375" 5.25" Dual plane intake manifold 1500-1600 rpm range 429/460 10.322" Production & M-6049-A429/ B429/SCJ/SCJA/SCJB 6.30" 6.30" Single plane, “Victor” M-9424-H429* 429/460 10.322" Production & M-6049-A429/ B429/SCJ/SCJA/SCJB 6.30" 6.30" Single plane, Dominator Flange M-9424-J429* 429/460 10.322" M-6049-SCJ/SCJA 5.84" 5.84" Dual plane, “Performer RPM” 1500-6500 rpm range M-9424-V351* 351W 9.500" Inline Valves 5.75" 5.75" Single plane, “Victor Jr.” 3500-7500 rpm range *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 109 ENGINE COMPONENTS 351 FORD RACING SINGLE PLANE INTAKE MANIFOLD M-9424-D453* CAMSHAFTS AND LIFTERS FORD RACING CAMSHAFTS The Ford Racing Camshaft Specification chart describes individual cams currently available from Ford Racing. Refer to page 216 for performance characteristics and usage guidelines. See page 115 for valve springs. FORD RACING CAMSHAFT SPECIFICATIONS ROCKER RATIO INTAKE EVENTS (0.050') OPEN CLOSE EXHAUST EVENTS (0.050') OPEN CLOSE DURATION (SAE) INT. EXH. LIFT (INCHES) LOBE VALVE LOBE CENTER INT. EXH. PART NUMBER ENGINE M-6250-B303* 1985 and Later 302 Roller Cam 1.60 5° BTC 39° ABC 49° BBC 5° BTC 284° 224° 284° .300 I .480 I 107° 224° .300 E .480 E 117° 1985 and Later 302 Roller Cam 1.60 0° BTC 40° ABC 40° BBC 0° BTC 282° 220° 282° .311 I .498 I 110° 220° .311 E .498 E 110° 1985 and Later 302 Roller Cam 1.60 4° BTC 42° ABC 52° BBC 6° BTC 288° 226° 288° .320 I .512 I 109° 226° .320 E .512 E 119° 1985 and Later 302 Roller Cam 1.60 5° BTC 39° ABC 49° BBC 5° BTC 286° 224° 286° .339 I .542 I 107° 224° .339 E .542 E 117° 1985 and Later 302 Roller Cam 1.60 7° BTC 41° ABC 51° BBC 3° ATC 290° 228° 290° .345 I .552 I 107° 228° .345 E .552 E 117° ➀➁➂➅ M-6250-E303 ➀➁➂➅➆ M-6250-F303* ➀➁➂➃➅➇ M-6250-X303* ➀➁➂➃➅➈ M-6250-Z303* ➀➁➂➃➄➅➉ NOTE: Camshaft intake and exhaust valve events are measured at 0.050" tappet lift. The duration figures in the shaded area are taken at 0.050" tappet lift. This is useful to check the cam with a degree wheel during installation. The solid color is advertised duration. For comparison purposes, add intake and exhaust lobe centers and divide by 2 to calculate “camshaft centerline” specification for Ford Racing camshafts. NOTES: ➀ On EFI engines, performance camshafts work only with mass air induction systems. Will not work with Explorer EEC-V EFI. ➁ Also fits 1994-97 351W with factory roller cam when used with mass air EFI. ➂ Stock 5.0L HO cam advertised specs are 266°/266° duration, 0.444"/0.444" lift. ➃ May require piston modification for piston-to-valve clearance. Valve clearance should be checked. ➄ May require longer pushrods. ➅ Hi-stall torque converter recommended for automatic trans. ➆ Emissions legal with 5-speed manual trans. E.O. #D-225-16. ➇ Great for superchargers. Manual transmission recommended. ➈ Good torque and power up to 6200 rpm Manual transmission recommended. ➉ Good torque and power up to 6500 rpm Manual transmission recommended. CAM LUBE M-19579-A12 • Highest quality cam lube for camshaft replacement and engine assembly • Recommended for use with all Ford Racing flat tappet camshafts • Distributed in cases of 12 • Single bottles may be available from your Ford Racing Distributor part number CM-19579-A1 • Use engine oil on roller camshafts Did you know… 351W blocks that are roller cam compatible have the casting number F4TE. It is located near the starter. If your block is not roller ready, conversion lifter part number M-6500-S58 will allow you to use a hydraulic roller cam in a non-roller 289/302/351W block. Did you know… The first year of a hydraulic roller cam in a 302 was 1985. 110 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CHECKING CAMSHAFT TIMING In order to check cam timing, you will need some specialty tools. You will need a degree wheel, dial indicator with magnetic base, and a heavy wire for a timing pointer. Choose a large diameter wheel as they are easier to read and more durable. Some manufacturers sell kits with a rigid, adjustable pointer that mounts easily to the front the engine. The other option is a heavy wire that is mounted to the block and bent into position. Install the number 1 cylinder intake lifter in the proper lifter bore. Position the dial indicator so the tip is on the edge of the lifter or in the center of the lifter. Extensions for the dial indicator may be necessary. Carefully line up the dial indicator so the travel of the indicator is linear to the lifter. Rotate the engine and observe the action of the lifter. Make sure the fully open and fully closed positions of the lifter are within the travel range of the dial indicator. Rotate the crankshaft until the lifter is at the highest point of its travel, and set the dial indicator to zero. Continue rotating the engine clockwise until the lifter starts to travel up again. Slowly continue until the lifter is .030" below the point of maximum travel, *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. and note the reading of the degree wheel. Start rotating the crank again until the lifter is .030" below the maximum travel on the closing side of the cam lobe. Note the degree wheel reading. The AVERAGE of the two readings taken is the location of maximum intake lift ATDC (After Top Dead Center). Compare this to the installation recommendation of the cam manufacturer, as it should be relatively close. The timing should be within one degree of the recommended setting. If there is a need to adjust the timing, FRPP has multi-index timing chain sets which have nine keyways to adjust cam timing. NOTE: Many cam manufacturers provide .050" lift cam timing information. To check this, reset the dial indicator to zero with the lifter at zero lift. Then rotate the crank in the clockwise direction until .050" lift is shown on the indicator. Note the intake open degrees. Then proceed clockwise until the intake closing at .050" lift is reached. Compare the readings to the cam card. Together with the maximum lift information, this data will tell you where the cam is degreed. Once corrections are made, measure the cam timing once more to verify the fix was correct. www.fordracingparts.com 111 ENGINE COMPONENTS Start with placing the dial indicator and stand on the right side block deck to measure travel of the CENTER of piston number 1 (passenger side, front). Bring number 1 to TDC (Top Dead Center) by observing when the dial indicator stops moving. Bolt the degree wheel to the front of the crankshaft, and attach the pointer to the front of the block, so that the pointer is positioned at the zero degree reading on the wheel. To find exact TDC, first set the dial indicator to zero at the point of highest piston travel. Next, turn the crankshaft counterclockwise about 90 degrees. Then, slowly rotate the crankshaft clockwise (the normal direction of engine rotation) until the indicator is .030" below the TDC (zero) setting. Note the reading of the degree wheel at this point. Then, continue turning the crankshaft clockwise past the TDC about 90 degrees. Slowly rotate the crankshaft backwards counterclockwise until the same .030" below TDC is seen on the dial indicator. Again, note the degree wheel reading. Next, rotate the degree wheel so the pointer falls at the AVERAGE of the two observed readings. Lastly, relocate the pointer exactly over the zero reading of the degree wheel, and you will have perfectly dialed in TDC. Redo the procedure to satisfy yourself that the setting is correct, and then proceed to measure cam timing. ENGINE COMPONENTS TIMING CHAIN AND SPROCKET SETS PART NUMBER APPLICATION DESCRIPTION M-6268-A302* 289/302/351W/351 Full roller chain with 9-position multi-index crank sprocket. M-6268-B302* 289/302/351W/ 351 Ford Racing M-6268-A351* M-6268-A390* M-6268-B429* M-6268-A460* 351C/351M/400 390/427/428 429/429 BOSS/460 429/429 BOSS/460 M-6287-B302* 289/302/351W/ Ford Racing includes thrust plate. Cam sprocket is made from cast iron. Same as M-6268-A302, except cam sprocket is made from steel for maximum competition engines. Use with Full Roller Timing Chain hardened thrust plate M-6269-A351. and Sprocket Set Full roller chain with 9-position multi-index crank sprocket. Does not fit 1961-63 camshafts. Full roller chain with 9-position multi-index crank sprocket. Cast iron cam sprocket. Full roller chain with 9-position multi-index crank sprocket. Steel cam sprocket for maximum competition engines. Full roller chain with 9-position multi-index crank sprocket. Eccentric for M-6268-B302 and A302 kits—Mechanical fuel pump drive, with 3/8" bolt. 351 Ford Racing M-6287-C302* 289/302/351W/ Eccentric for M-6268-B302 and A302 kits—Mechanical fuel pump drive, with 7/16" bolt. 351 Ford Racing CAMSHAFT THRUST PLATE PART NUMBER APPLICATION DESCRIPTION M-6269-A351 302/351 Ford Racing 429/460 Steel replacement for production cast iron thrust plate for severe service. Use with steel timing chain sprocket. Low-friction roller bearing camshaft thrust plate. Requires machining of camshaft sprocket thrust surface. M-6269-A460 M-6269-A460 HY-VO® TIMING CHAIN AND GEAR SET M-6268-F302* 302/351W Ford Racing M-6269-A351 EARLY BLOCK HYDRAULIC ROLLER LIFTER SET M-6500-S58* Sold in engine sets Roush Industries, Borg-Warner Automotive and Morse Tec combined efforts to develop this new generation of a multi-indexing timing chain set. Now with improved tolerances for reduced backlash, the chain is twice as strong as a standard roller chain and three times as strong as a timing belt. It gained 2 horsepower @ 7000 rpm. Use with hardened thrust plate M-6269-A351. Use to install hydraulic roller lifter camshaft in a “non-roller” block. Fits 289/302/351W/351C. NOTE: May require custom pushrods and minor clearancing. M-6268-G302* Replacement Hy-Vo® Timing Chain HY-VO Timing Chain and Gear Set M-6268-F302* VALVE TAPPETS (SOLD IN ENGINE SETS OF 16) PART NUMBER APPLICATION TYPE/DESCRIPTION M-6500-C302* 289/302/351/429/460 Mechanical (96.5 grams). Replaces A302 M-6500-B303** 289/302/351/429/460 Hydraulic. OEM replacement. Replaces A303 M-6500-R302** 302 (5.0L) EFI Hydraulic. Roller tappet OEM replacement. Small block Hydraulic Roller Tappet M-6500-R302 shown 112 Techline (800) FORD788 Flat Tappet *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. ROLLER ROCKER ARMS PERFORMANCE FEATURES: DESIGN FEATURES: • Reduces friction and horsepower loss • Increases high-rpm train stability • High-strength trunnion supported by needle roller bearings • Grade 8 adjusting nuts • Precision machined from 2024 high-tensile strength aircraft alloy extrusions PART NUMBER PACKAGE OF 16 PART NUMBER PACKAGE OF 2 APPLICATIONS M-6564-A351* M-6564-AS51* 289/302/351W M-6564-D351* M-6564-DS51* M-6564-K351* N/A M-6564-B351* M-6564-BS51* ➀➂ M-6564-E351* M-6564-ES51* ➀➂ ➀ M-6564-A50* ➀➁ M-6564-F351* N/A VALVE TYPE NOTES 1.60:1 Stud Inline 1.70:1 Stud Inline Requires 3/8" stud, push rod guide plates and hardened push rods. Cast iron cylinder heads require pedestal machining. 1.60:1 Stud Inline Requires 7/16" stud, push rod guide plates and hardened push rods. Cast iron cylinder heads require pedestal machining. 1.60:1 Bolt On Inline 1.70:1 Bolt On Inline 1.70:1 Bolt On Inline For stock production cast iron cylinder heads with hydraulic non-adjustable valve train. Does not require guide plates, hardened push rods or pedestal machining. Includes pedestal inserts and bolts. Same as “Cobra” 5.0L Mustang. These rocker arms have beefy trunnions for extra long life. Die-cast aluminum construction. 1.65:1 Stud Inline 7/16" stud mount intake rocker with .150" offset push rod cup (pkg. of 16). 1.73:1 Bolt On Canted For stock production canted valve cylinder heads with hydraulic non-adjustable valve train. Does not require guide plates, hardened push rods or pedestal machining. Includes pedestal inserts and bolts. For canted valve cylinder heads. Requires 7/16" stud, push rod guide plates, and hardened push rods. Some cast iron cylinder heads require pedestal machining. M-6564-A460* M-6564-AS60* 351C/351M/400 1.73:1 Stud Canted 302 BOSS/429/460, 429 CJ/SCJ and Ford Racing high-port aluminum cylinder heads NOTES: ➀ The M-6564-B351 and -E351 bolt-on roller rocker arms will not clear the stamped rocker cover on standard 5.0L EFI engines. “Taller” valve covers, such as the production 5.0L EFI HO die-cast aluminum cover or Ford Racing chrome cover M-6582-D302, can be used if the baffle is modified in the RH cover. The M-6582-E302 polished aluminum valve cover will clear all rocker arms and stud girdles, but will not fit under the EFI manifold unless a 1" spacer M-9486-A53 is used between the upper and lower sections of the intake. M-6582-E302 will not fit 1994-95 Mustang or 1990-93 T-Bird. ➁ Serviced individually from your Ford, Lincoln or Mercury dealer. ➂ Rocker channels not included. “Cobra” Roller Rocker Bolt-On Type Roller Rocker Arm Assembly *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. Stud-Mounted Type www.fordracingparts.com 113 ENGINE COMPONENTS M-6564-C351* M-6564-CS51* and Ford Racing aluminum cylinder heads M-6049-J302 289/302/351 Ford Racing aluminum cylinder head M-6049-Z304 (Does not fit M-6049-Z304D, M-6049-Z304DA) 302/351W – 1978 and later with production heads Cast iron and aluminum GT-40 heads 302/351W – 1978 and later with production heads Cast iron and aluminum GT-40 heads M-6049-N351/N352 “Sportsman” head, M-6049-Z304D, M-6049-Z304DA 351C/351M/400 1973 and later 429/460 production cylinder heads DESCRIPTION RATIO MOUNTING STUDS AND SHIMS VALVE ROCKER ARM STUD (SOLD IN PKG. OF 16) Requires head to be tapped for threaded rocker arm stud. See page 219 for instructions. PART NUMBER APPLICATION DESCRIPTION M-6527-C311 302 BOSS/351C BOSS, 429/460 Wedge 7/16" dia. shoulder with 7/16" dia. threads. ➀ Mounting length is 1.850". For use with stud girdles. M-6527-D311 289/302/351W 3/8" dia. shoulder with 7/16" dia. threads. ➀ Mounting length is 1.850". Rocker Arm Stud M-6527-C311 shown NOTE: ➀ Mounting length is from face of head to top of the stud. VALVE ROCKER ARM PEDESTAL SHIM KIT M-6529-A302* All Small Block and ROCKER CHANNEL KIT M-6588-A50** Engine Set • Fits 5.0L/5.8L production heads and GT-40 heads • For production stamped steel and Ford Racing bolt-on roller rockers • Ties two rocker arms together for proper alignment 429/460 Wedge Use with bolt-on roller rocker arms M-6564-A50, M-6564-B351, -C351, and -E351 to obtain correct lifter pre-load. Shim kit includes 16 thin and 16 thick shims, which can be used to reduce lifter pre-load by 0.030" (thin shim), 0.060" (thick shim), or 0.090" (thin plus thick shim). ROLLER CAM CONVERSION KIT M-6253-A50** • This kit is designed to help engine builders assemble our short blocks to complete engines • Kit includes 8 hydraulic roller lifter powdered metal tie bars, 1 retainer plate and 2 bolts • Fits 1985-01 302, 1994-97 351W, 1996-04 M-6010-A4/A58/R302/A351/B351/C351/R351/R352/S351/V351/W351 race blocks • For production non-roller cam blocks use M-6500-S58 lifters VALVE SPRING SEAT (SOLD IN PKG. OF 16) For use with aluminum cylinder heads to prevent damage to valve spring seat area. PART NUMBER CYLINDER HEAD USAGE SPRING O.D. O.D. CUP I.D. CUP SEAT DESCRIPTION MATERIAL THICKNESS M-6536-E351 M-6536-SCJ M-6536-BH M-6049-B429 1.460" 1.590" 0.568" Machined Steel 0.062" M-6049-SCJB 1.550" 1.680" 0.577" Machined Steel 0.062" M-6513-BH 1.290" 1.300" 0.880" Machined Steel 0.060" VALVE SPRING RETAINERS (SOLD IN PKG. OF 16) See pages 217-218 for valve spring and retainer information. PART NUMBER M-6514-A50 APPLICATION VALVE Single lock groove. 11/32" dia. stem. M-6514-B50 ➀ Single lock groove. SPRING O.D. RETAINER O.D. STEP DIMENSIONS 1ST STEP 2ND STEP 7° Machined Steel 1.500" 1.375" 1.060" 0.675" M-6513-A50 ➁ 7° Machined Steel 1.500" 1.375" 1.060" 0.675" M-6513-BH 10° Machined Steel 1.055" 1.045" 0.640" SPRING DESCRIPTION M-6513-A50/B351 M-6049-N351 and all GT-40 ➀➁ 11/32" dia. stem. M-6514-BH Single lock groove. 11/32" dia. stem. NOTES: ➀ Use of M-6514-B50 retainers on 1979-95 production valves of 5.0L (302) HO and production GT-40 engines eliminates exhaust rotators and will result in 1.800" intake and exhaust spring “installed height.” ➁ With Ford Racing stainless steel valves. VALVE SPRING KEEPERS (SOLD IN ENGINE SET PKG. OF 16) PART NUMBER TYPE AND USAGE RECOMMENDATIONS M-6518-B351 Machined and hardened. 7° design with single lock groove. For all-out competition and use with titanium valves. M-6518-BH Machined and hardened. 10° design with single lock groove. For use with M-6514-BH retainers only! 114 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. VALVE TRAIN COMPONENTS INTAKE VALVES — SINGLE GROOVE (SOLD INDIVIDUALLY) HEAD TIP TOTAL DIAMETER LENGTH LENGTH PART NUMBER APPLICATION DESCRIPTION M-6507-J302* GT-40 Head Aluminum M-6049-Y302/X302/X304/ X305/X306/X307 1.940" 0.383" 5.078" Premium stainless steel, swirl polished, under-cut stem M-6507-A304* M-6049-Z304/Z304D/ Z304DA 2.02" 0.290" 5.340" Premium stainless steel M-6507-A351* M-6507-B429* M-6049-N351/R351 2.020" 0.250" 5.140" Premium stainless steel 429/460 Wedge CJ Aluminum 2.20" 0.250" 5.265" Premium stainless steel M-6507-D461* M-6049-D46 46.83 mm Std. 117.6 mm Premium stainless steel EXHAUST VALVES — SINGLE GROOVE (SOLD INDIVIDUALLY) PART NUMBER APPLICATION HEAD TIP TOTAL DIAMETER LENGTH LENGTH M-6505-A351* M-6505-A429* M-6049-N351/R351 1.600" 0.250" 5.140" Premium stainless steel 429/460 Wedge CJ Aluminum 1.76" 0.250" 5.050" Premium stainless steel M-6505-B304* M-6505-D461* M-6505-G302* M-6049-Z304DA 1.600" 0.290" 5.365" Premium stainless steel M-6049-D46 35.88 mm Std. 117.6 mm Premium stainless steel GT-40 Head C.I. M-6049-L302 Aluminum M-6049-Y302/X302/X304/ X305/X306/X307 1.540" 5.078" 0.383" Intake Valve DESCRIPTION Premium stainless steel, swirl polished, under-cut stem VALVE SPRINGS ➀➁ APPLICATION TYPE ID OD MINIMUM LOADS – NEW SPRINGS CLOSED OPEN M-6513-A50 289/302/351W with Ford Racing, GT-40 cylinder heads (pkg. of 16) ➄➅➆ Single ➂ 1.006" 1.500" 110 lbs. @ 1.820" 240 lbs. @ 1.400" M-6513-A351 M-6513-BH 289/302/351W/460 ➅ Dual ➃ 0.800" 1.460" 135 lbs. @ 1.850" 394 lbs. @ 1.175" M-6049-Z304DA Ford Racing cylinder heads Single 0.656" Beehive™ 0.885" Conical 1.055" 1.290" 130 lbs. @ 1.800" 313 lbs. @ 1.175" VALVE SPRING NOTES: ➀ Valve springs with the same load rating (but with different color-coded stripes) may be packaged together. ➁ 1977 and later 302 engines have different installed heights for intake and exhaust valves. ➂ With damper. ➃ Requires nylon valve stem seal. ➄ For use on production heads (see page 114) valve spring retainer chart and notes. ➅ Sold in pkg. of 16. ➆ Not recommended with stock rocker arm, may have interference. VALVE GUIDE KIT M-6510-Y303 Sold in sets of 4 Replacement valve guides for M-6049-Y302/Y303/X302/ X303/X304/X305/X306/X307 • .300" inside diameter (undersize) • .557" outside diameter (standard) VALVE PUSH ROD GUIDE PLATE ENGINE COMPONENTS PART NUMBER Exhaust Valve Valve Spring with Damper VALVE STEM SEALS POSITIVE-TYPE, GUIDE-MOUNTED SEAL PART NUMBER TYPE APPLICATION NOTES M-6571-A50** Rubber GT-40 cylinder Pkg. of 8 intake heads. No machining and 8 exhaust required seals Fits most production 0.550-0.570" diameter guides. PACKAGING (SOLD IN PKG. OF 8) See page 219 for installation instructions. Use with mechanical cams, threaded stud, adjustable (non-rail) rocker arms and hardened push rods. May require modification for use with roller rocker arms. PART NUMBER CYLINDER HEAD PUSH ROD DIAMETER M-6566-D311 M-6566-D351 M-6566-SCJ M-6566-Z304D 289/302/351W M-6049-N351/N352 M-6049-SCJ/SCJA/SCJB M-6049-Z304D/Z304DA .3125" .3125" .375" .3125" *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. M-6566-D311 shown www.fordracingparts.com 115 ENGINE LUBRICATION PARTS FORD RACING HIGH-PERFORMANCE OIL FILTERS SOLD AS CASE OF 12 • • • • • Synthetic-Polymer/Cellulose-Fiber blend media Heavy-gauge base and canister for higher burst strength and impulse fatigue resistance High-quality silicone anti-drain back valve Non-stick sealing gasket for ease of installation and removal Long life with standard and synthetic motor oils MOTORCRAFT PART NUMBER PERFORMANCE FILTER FL300 CM-6731-FL300 (Each) ➀ FL1A CM-6731-FL1A (Each) ➀ FL820S CM-6731-FL820 (Each) ➀ FL400S CM-6731-FL400 (Each) ➀ FL1995 CM-6731-FL1995 (Each) ➀ FL784 CM-6731-FL784 (Each) ➀ FL299 CM-6731-FL299 (Each) ➀ NOTE: ➀ Check Ford Racing Distributors for single filter part numbers. 90° OIL FILTER ADAPTER M-6880-A50 • Screws into block and rotates filter toward front of engine to provide clearance for engine swaps and chassis modifications • Fits most Ford engines that use Motorcraft FL-1A oil filter OIL PUMP M-6605-B302 M-6605-A341 M-6605-A427 M-6605-A429 DRIVE SHAFTS 1987-95 5.0L Fits EFI and Non-EFI 351W/All 351 Ford Racing ➀ 390/427/428 429/429 BOSS/460 Heavy duty. Chrome moly steel. Centerless ground. NOTE: ➀ Will not fit EEC-IV equipped engines. OIL PUMPS M-6600-M50 289/302 429/460 Oil Pump • Up to 50% more filtering capacity than standard filters • Improved filtering efficiency • This technology is only available through Ford Racing Performance Parts PART NUMBER M-6731-FL300 (Case of 12) M-6731-FL1A (Case of 12) M-6731-FL820 (Case of 12) M-6731-FL400 (Case of 12) M-6731-FL1995 (Case of 12) M-6731-FL784 (Case of 12) M-6731-FL299 (Case of 12) HEAVY-DUTY OIL FILTER MOUNT M-6880-S • Uses extra large capacity filter M-6731-FL784 or FL1995 (sold separately) • Inlet and outlet tapped for 3/4" pipe thread for maximum flow ENGINE OIL COOLER KIT HEAVY-DUTY SELF-REGULATING TYPE M-6642-S101 Unique patented “stacked-plate” design provides efficiency improvement of 35% over “fin-and-tube” coolers. This 8" x 11" x 1.5" unit has a heat rejection rate of 20,500 BTUs per hour. The self-regulating feature bypasses cold engine oil automatically (without thermostats or valves) until oil viscosity decreases and allows oil to flow through the main body of the cooler. Kit includes all fittings, attaching hardware and instructions. Use on engines with FL-1A filters. REMOTE-MODIFIED OIL FILTER ADAPTER KIT M-6881-C100 All engines with 3/4"-16 thread filter and 2.435" diameter O-ring. This kit contains all necessary parts to mount the oil filter off the engine, including block adapter, oil filter mount, hose and attaching parts. Not recommended for performance engines. Use M-6880-S. Standard Volume Requires bolt-on pickup (not included) M-6600-D2 289/302 High Volume Requires bolt-on pickup (not included) M-6600-B3 351W High Volume Requires bolt-on pickup (not included) M-6600-A460 429/460 289/302 Oil Pump Wedge High Volume Fits rear sump Ford truck oil pan. Bolt-on style pickup (not included). Does not fit 429 Cobra Jet NOTE: High-volume pumps may require minor modification of oil pan. 116 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. OIL PAN KITS OIL PAN CONVERSION KITS SERPENTINE 1979-93 FOX CONVERSION KIT M-6670-A50** BOSS 302 OIL PUMP PICKUP TUBE M-6622-BOSS302 This kit is intended for customers that purchase one of our 5.0L long block crate engines and plan to install it in a 1979-93 Mustang or other Fox chassis vehicle. This kit includes: dual sump oil pan, oil pump pickup tube, dipstick, dipstick tube, crankshaft damper, timing pointer, M-8501-C50 reverse rotation serpentine water pump, and M-6059-D351 timing chain cover. NOTE: Does not have provision for low oil sender. Fasteners not included. • • • • For use with M-6010-BOSS302 block Clears 4-bolt main caps Fits stock Fox body Mustang pans Fits FISE pans used on 1991-95 Mustangs OIL PAN WINDAGE TRAY KIT 289-302 M-6687-A302 289/302 Kit consists of windage tray and attaching bolts originally designed for the 1969-70 302 BOSS engine with front sump oil pan. Requires modification if used with rear sump pan; oil pan designed for use with rack-and-pinion steering or oil pan for 302 Ford Racing blocks. OIL PAN WINDAGE TRAY KIT 352 THRU 428 M-6687-A390 352 thru 428 “FE” V-8 engines Consists of windage tray and 2 gaskets. ENGINE COMPONENTS ENGINE SWAP OIL PAN KITS PART NUMBER SUMP CAPACITY FINISH APPLICATION/DESCRIPTION M-6675-A50** Rear 5-quart Unplated M-6675-A58* Rear 5-quart Unplated M-6675-A460* Rear 6-quart Unplated 5.0L oil pan kit. Includes rear sump oil pan, dipstick, dipstick tube, pickup, and main cap stud. Ideal for engine swaps. Fits 1979-95 Mustangs and Fox chassis vehicles. Fits 1983-01 production blocks and M-6010-A50/B50 blocks. NOTE: Does not have provision for low oil sender. Fasteners not included. 351W/5.8L oil pan kit. Includes rear sump oil pan, dipstick, dipstick tube, pickup, and main cap stud. Ideal for engine swaps. Fits 1979-95 Mustangs and Fox chassis vehicles. Fits 1969-04 production blocks and M-6010-A351/A58/B58/C58 blocks. Fasteners not included. 429/460/7.5L oil pan kit. Includes rear sump oil pan, dipstick, dipstick tube, pickup, and main cap stud. Ideal for engine swaps. Fits 1979-95 Mustangs and Fox chassis vehicles. Fits 1969-97 production blocks. Fasteners not included. M-6675-A50 M-6675-A58 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. M-6675-A460 www.fordracingparts.com 117 FASTENERS, PLUGS, DOWELS HEAD BOLT KIT M-6065-D289* 351W type heads PLUG AND DOWEL KITS M-6026-A302** 289/302/351W on 289/302 block Use when installing stock 351W, Ford Racing cast iron (M-6049-L302/L303) or Ford Racing aluminum head (M-6049-Y302/Y303/X302/X303/X304/X305/X306/X307) on 289/302 blocks. Kit features 20 ARP® cylinder head bolts with .4375" diameter thread. Includes 20 special stepped washers. Services two heads. Necessary dowels, cup plugs and pipe plugs for rebuilding production V-8 blocks. M-6026-R351* 351 Ford Racing Necessary dowels, cup plugs and pipe plugs for rebuilding Ford blocks: M-6010-R302/R351/ R352/R353/R354/R355/S302/S351/V351/W351. M-6026-A460* Use with M-6010-A460 cylinder block. Kit includes cam plug, oil gallery plugs, transmission dowels and head dowels. M-6026-A58* • Replacement plugs and dowel kit for M-6010-A58/B58 blocks • Includes all special cup plugs and dowels C460 “SPORTSMAN” HEAD STUD KIT M-6014-G500* • Fits M-6049-C460 heads on M-6010-A460 block • Sold in engine sets, includes studs, nuts and washer • Manufactured by ARP exclusively for Ford Racing CAMSHAFT PLUG M-6026-S351* 302/351 M-6026-A302 shown Ford Racing blocks camshaft plugs to service M-6010-R302/S302/R351/R352/R353/R354/ R355/S351/V351/W351/BOSS302 blocks. Package of 10. Threaded freeze plug (1.25" NPT) kit. Does not include dowels. REPLACEMENT PLUG KIT M-6026-R452* O-RING AND DOWEL KIT M-6026-R451* M-6026-B302* REPLACEMENT PARTS FOR M-6010-C302/J351/K351 ALUMINUM BLOCKS M-6012-A351* Service replacement cylinder bore sleeve for Ford Racing 302 and 351 aluminum cylinder blocks. Sleeve ID is 3.98". Length is 5.820". The length can be trimmed to fit. Fits M-6010-R451 block. M-6012-B351* Use with M-6010-R451/S451 blocks. Same as M-6012-A351 except OD is .010" oversize. “STAGE 8” LOCKING HEADER BOLT SYSTEMS These kits fit most V-8 and many other engines. Includes (16) bolts and locking hardware. PART NUMBER SIZE M-9432-A50 M-9432-A51 M-9432-A54 3/8"-16 x .75" ➀ Most Headers 3/8"-16 x 1" ➀ Ford Racing Shorty Headers 8 mm-1.25 x 22 mm 4.6L/5.4L Modular V-8 Engines FITS CYLINDER HEAD STUD KIT M-6014-Z304* • Use when installing M-6049-Z304/Z304A/ Z304D/Z304DA heads on a “Sportsman II” 351W block • .500" diameter studs with 12 point nuts and hardened washers • Header fasteners positively will not back out. Eliminates need to monitor and tighten bolts regularly • Grade 8 aircraft quality bolts made in U.S.A. Duplex nickel plated • Manufacturer’s Lifetime Warranty NOTE: ➀ Will not fit 4.6L/5.4L modular V-8 118 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. INTAKE MANIFOLD GASKETS (SOLD IN PKG. OF 2) NOTE: None of the following race-quality gasket kits include rubber end seals. Use RTV sealer or production end seals. PART NUMBER M-9439-A302* MANIFOLD APPLICATION Intake Manifold Gasket M-9439-B302 with Print-O-Seal® PRINT-O-SEAL® CYLINDER HEAD APPLICATION M-9424-A321 289/302/351W, M-6049-J302/K302/L302/L303/Y302/ Y303 no EGR M-9439-B302** All 289/302/351W, M-6049-J302/K302/L302/L303/Y302/ Y303 with EGR M-9439-A50* All M-6049-L302/L303/X302/X303/X304/X305/Y302/Y303/X306/ X307/Z304/Z304A/Z304D/Z304DA with or without EGR ➀➁➂ M-9439-G460* M-9424-C460 M-6049-C460/D460 M-9439-H460* M-9424-C460 M-6049-C460/D460 M-9439-R352* M-9424-W352 M-6049-C3H ® NOTES: ➀ Synthetic rubber Print-O-Seal (Fel Pro Inc.) bead around ports provides improved sealing. ➁ Redesigned for improved port location and allows mild porting. ➂ Teflon coated, steel reinforced. CRANKSHAFT REAR OIL SEAL M-6701-A460** 429/460 two-piece, split-lip design M-6701-B351** 351W from 7/11/83, Ford Racing one-piece seal. Yes 0.050" Yes 0.050" Yes 0.070" No No No 0.060" 0.125" 0.050" REAR MAIN SEAL M-6701-B302** • Direct replacement one-piece crankshaft rear main seal for 1983-02 5.0L/302 blocks • Also fits Ford Racing blocks M-6010-R302, M-6010-A50, M-6010-B50 and M-6010-BOSS302 ENGINE COMPONENTS Use on Ford Racing 351W blocks manufactured after 6/1/93. High-temperature resistant Viton® material. Viton® is a registered trademark of Dupont Performance Elastomers. NOTE: Use E5ZZ-6701-A one-piece seal for 1983 and later 2.3L OHC models. Available at your Ford, Lincoln and Mercury dealer. GASKET THICKNESS ± .004 EXHAUST MANIFOLD GASKETS – RACE QUALITY (SOLD IN PAIRS) PART NUMBER CYLINDER HEAD APPLICATION M-9448-A351* “Sportsman” head M-6049-N351/R351 M-9448-B302** Production 289/302/351W, M-6049-Y303/L302/X302/X303/ X304/X305/X307 M-9448-B302 shown M-9448-A462* 4.6L SOHC M-9448-A464* 4.6L DOHC M-9448-3V* 4.6L/5.4L 3V (sold in package of 12 sets only) NOTE: Header flanges available from Hedman headers. Contact local distributor. M-9448-A462 shown VALVE ROCKER ARM COVER GASKETS (SOLD IN PAIRS) PART NUMBER APPLICATION DESCRIPTION/NOTES M-6584-A50** 5.0L/302/351W Production-type design featuring metal gasket with bonded O-ring. Part of high-performance 5.0L gasket kit M-6051-A50 (see page 121). Designed for valve covers without a gasket lip. Competition quality gasket set. Cork-rubber material is laminated to a steel core to produce superior strength and resistance to distortion and creep. Recommended for use with M-6582-C460/R460 die-cast rocker arm cover. Precision edge-molded silicone rubber sealing beads on a rigid carrier to resist high heat and high vacuum. Built-in torque limiters prevent over-compression and gasket splitting. Great for on-again/off-again applications. M-6584-A460* 429/460 Wedge M-6584-A452* 351C/351M/400 and M-6049C3L/SCI/ C3H/D3 Heads *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. M-6584-A50 shown M-6584-A452 shown www.fordracingparts.com 119 ENGINE GASKETS CYLINDER HEAD GASKETS (SOLD IN PAIRS) ➀ BORE DIAMETER GASKET DIAMETER COMPRESSED THICKNESS COMPRESSED VOLUME 4.00" 4.100" 0.042" 9.1 cc 4.00" 4.100" 0.040" 8.8 cc M-6051-S331* 302/351 4.00" 4.100" 0.040" 8.8 cc M-6051-CP331* 302/351 4.00" 4.100" 0.040" 8.8 cc M-6051-B341* Big Bore 351 4.125" 4.160" 0.040" 9.1 cc Up to 4.125" 4.230" 4.160" 0.040" 9.0 cc 4.400" 0.040" 9.7 cc Race quality gasket with steel wire combustion ring and stainless steel armor. M-6051-A441** 429/460 Wedge 4.360" Std. 4.500" 0.0425" 11.2 cc M-6051-B460* 429/460 Wedge Up to 4.625" 4.670" 0.038" 10.7 cc Race quality “competition” gasket. Features solid metal core and wire-encased combustion chamber seal. Competition gasket with round water openings to match M-6010-A460 engine blocks. PART NUMBER CYLINDER BORE APPLICATION M-6051-A302** 289/302/351W Production-Type Cast Iron and Aluminum Heads M-6051-B51** 302 Production Ford Racing Blocks M-6051-R351* 302/351 M-6051-A427* Ford Racing All “FE” V-8 DESCRIPTION 4.00" standard bore “competition” gasket for cast iron or aluminum cylinder heads on 302 and 351W production blocks. Features solid metallic core with wire-encased combustion chamber seal for applications. Surfaces are Teflon coated. 4.00" standard bore expanded graphite gasket for high-performance applications. Part of M-6051-A50 5.0L gasket kit described on page 121. Requires torque-to-yield cylinder head bolts (available from Ford, Lincoln and Mercury dealers). Pre-flattened steel wire combustion ring. Exhaust side is straight to accommodate FRPP block water passages. Pre-flattened copper wire combustion ring. Exhaust side is straight to accommodate FRPP block water passages. 4.125" overbore “competition” gasket. Designed for Ford Racing blocks with larger 4.125" overbore. Bore flange valve pockets have been added to unshroud intake and exhaust valves. Set includes unique RH and LH gaskets! For use on M-6010-R351/R352/R451/R452. NOTES: ➀ Several different water hole patterns have been used on 302 and 351W Ford Racing cylinder blocks and heads since their introduction. Engine assemblers should lay the head gasket on the block and the cylinder head (with front of gasket toward the front of the engine) to make sure there is a path for coolant flow from the block into the head. In some cases, holes may have to be drilled in the block or head, or punched in the gasket. M-6051-B460 M-6051-S331 Cylinder Head Gasket M-6051-B341 120 Techline (800) FORD788 Coolant Water Holes *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. HIGH-PERFORMANCE ENGINE GASKET SETS Ford Racing introduces three complete overhaul gasket sets. Manufactured to Ford’s specs by Fel Pro®. The kits include race quality head gaskets and Print-O-Seal® intakes, oil pan and valve cover gaskets. They also include front and rear oil seals plus all gaskets for a complete rebuild. These high-performance gasket sets are a must when rebuilding. M-6003-A50** ➀ Fits 289/302/351W (1963-01) M-6003-A429** Fits 429/460 (1968-87) NOTE: ➀ Does not include one-piece rear main for 351W, use M-6701-B351. ONE-PIECE RUBBER OIL PAN GASKETS Recommended for high-performance applications and with Ford Racing supercharger kits. This gasket kit really works and will eliminate sealing issues associated with 5.0L engines for most applications. The kit includes: 2 expanded graphite head gaskets (M-6051-B51), 2 high-tech metal with bonded O-ring rocker cover gaskets (M-6584-A50) and 1 engine set of torque-to-yield cylinder head bolts. NOTES: ➀ The bolts can be used three times. New bolts are available from Ford, Lincoln and Mercury dealers. Same parts as used on production 1993-01 5.0L. ➁ Do not use kit with “lipped” valve covers. M-6710-A50** 5.0L Designed for use with smooth rail oil pans. One-piece design, rubber bonded on steel reinforcement. Fits 1983-01 block/oil pans with dipstick in the block. CYLINDER HEAD CHANGING KIT M-6067-D46** SOHC 2V M-6067-T46** DOHC 4V ➀ M-6067-T50* “Cammer” 5.0L DOHC 4V ➀ ENGINE COMPONENTS HIGH-PERFORMANCE GASKET KIT FOR 5.0L ENGINE M-6051-A50** ➀➁ M-6710-A351** 351/5.8L Designed for use with smooth rail oil pans. One-piece design, rubber bonded on steel reinforcement. M-6710-A460** 429/460 Designed for use with smooth rail oil pans. One-piece design, rubber bonded on steel reinforcement. Contains all components necessary for changing cylinder heads on 1996-04 4.6L Mustang. Includes several parts that make this task significantly easier. Highly recommended when installing M-6049-D46/P46/T46 cylinder heads. NOTE: ➀ Except supercharged engines. M-6067-D46 shown *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 121 WATER PUMPS 351 FORD RACE WATER PUMP AND HOUSING M-8501-R351* Water Pump – Use with STOCK FLOW REPLACEMENT WATER PUMPS M-8501-C50 housing M-8501-R352 M-8501-R352* Water Pump Housing • Reverse rotation serpentine belt aluminum water pump for 1986-93 5.0L/5.8L engines • Standard shaft and bearing with stamped impeller • Provides good flow and pressure for engines that operate below 6000 rpm • Can be used on 1979-85 with minor modifications Designed to meet the durability requirements of NASCAR race engines, this new pump has many impressive features. • Improved efficiency, requires 2.5 hp less than our present pump to drive the pump at 8000 pump shaft rpm. A 40% reduction • Pumps 53 gallons per minute at 8000 pump shaft rpm • Removable pump assembly for easy service, making rebuilds unnecessary • Improved housing with extended inlet port • Bolts directly onto “Yates” belt drive front cover. Production front cover requires adapter plates included in the kit • Improved reliability, no rear cover plate to leak M-8501-G351** • Standard rotation V-belt aluminum water pump for 5.0L/5.8L engines stamped impeller • Standard shaft and bearing with stamped impeller • Provides good flow and pressure for engines that operate below 6000 rpm • Can be used with M-6059-D351 timing chain cover or stock V-belt timing cover MAXIMUM FLOW 429-460 ALUMINUM WATER PUMP M-8501-C460 Fits 429-460 big blocks Premium quality aluminum casting. Driver-side water inlet. Maximum flow capacity. Accepts stock brackets and pulleys for most 1970 and newer V-belt engines. Standard rotation. NOTE: Now used on 460 and 514 crate motors. Did you know… 1968-80 302 engines were built with a 28-ounce imbalance factor. 1981-01 302 engines were built with a 50-ounce imbalance factor. 1969-97 351W engines were built with a 28-ounce imbalance factor. 1970-74 351C engines were built with a 28-ounce imbalance factor. NOTE: Severe engine damage will result if you use the wrong flywheel or damper on your engine. 122 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. REPLACEMENT FRONT TIMING CHAIN COVER M-6059-D351** • Aluminum replacement with fuel pump boss • Fits 289/302/351W • For standard rotation pump or M-8501-B50 reverse rotation pump • Has dipstick tube hole STREET ROD SHORT V-BELT WATER PUMP M-8501-E351S* Fits 289/302/351W • Driver-side radiator hose inlet • Provides approx. 1.5" of space at the front of the engine allowing for more radiator to fan clearance without a recessed fire wall • Must use with long style (3.950") 4-bolt damper. Can also use M-6316-A50 or M-6316-C351 with appropriate spacer. See page 124 • .750" pulley pilot shaft • Fits M-6059-D351 timing chain cover FUEL PUMP BLOCK-OFF PLATE M-9351-A302 • All V-8 except 351C/351M/400 SHORT SERPENTINE BELT WATER PUMP KIT M-8501-A50* Fits 289/302/351W M-8509-M** Special 3-piece aluminum pulley kit. Includes water pump, crankshaft and alternator pulley for above water pump kit. SHORT SERPENTINE BELT WATER PUMP M-8501-D50** • Same water pump used in short serpentine water pump kit, M-8501-A50 • Direct replacement for 1994-95 Mustang 5.0L/302 • Can be used with the Explorer timing chain cover found on M-6007-B50/B51/XE3/XB3 crate engines • A new water pump for the price of a remanufactured pump • Production 2003 F-150 Lightning intercooler coolant circulation pump • Inlet and outlet hose connection diameter is 19 mm/3/4" • Can be used in many coolant pumping applications ENGINE COMPONENTS • Engine overall length from front of water pump to back of block is 27" • Serpentine belt, reverse rotation, approx. 1.75" shorter than old style pumps • Kit includes special timing chain cover with short water pump and gaskets. Driver-side radiator hose inlet • Meets OEM specifications for water flow • A V-8 water pump for a V-8 engine. Must use electric fuel pump NOTE: Requires pulleys listed below: ELECTRIC WATER PUMP M-8501-L54** CHROME APPEARANCE MAXIMUM FLOW ALUMINUM WATER PUMP M-8501-B50C* CHROME APPEARANCE MAXIMUM FLOW ALUMINUM WATER PUMP M-8501-F351C* • Same as M-8501-B50 with powdercoat for chrome appearance • Premium reverse rotation serpentine belt aluminum water pump for 1986-93 5.0L engines • Features HD 3/4" roller ball bearing, CNC machined curved vane impeller and billet steel hub • Provides maximum flow, maximum pressure and equal distribution to both sides of the block • Same as M-8501-F351 with powdercoat for chrome appearance • Premium standard rotation aluminum water pump for 1970-78 5.0L and 1970-87 351W engines • Features HD 3/4" roller ball bearing, CNC machined curved vane impeller and billet steel hub • Provides maximum flow, maximum pressure and equal distribution to both sides of the block *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 123 PULLEYS SERPENTINE BELT HORSEPOWER PULLEY KITS – MUSTANG 5.0L M-8509-A50* 1987-93 5.0L Mustang with serpentine drive belt, A/C and power steering M-8509-A51* 1994-95 Mustang with serpentine belt drive, A/C and power steering M-8509-A50* Truck 5.0L/302–1987-96 and 5.8L/351–1988-96 Contains steel crankshaft, water pump and alternator pulleys, plus bolts and installation instructions. Reduces accessory drive rpm by: (water pump–14%) and (alternator–22%) …and significantly improves performance! Pulleys are manufactured on state-of-the-art CNC machines and have an awesome blue finish over zinc plating. Pulleys use production serpentine belt. WARNING: Engine cooling will be reduced. Serpentine Belt Horsepower Pulley Kit M-8509-A50 shown 1965-69 MUSTANG BILLET SINGLE GROOVE PULLEY SET M-8509-CM* 1970-78 MUSTANG BILLET SINGLE GROOVE PULLEY SET M-8509-DM* 1970-78 MUSTANG BILLET DUAL GROOVE PULLEY SET M-8509-EM* • • • • • • • • • • • • Fits 1965-69 Mustang with 289/302/351W 3-bolt crank pulley Single groove crank pulley Single groove water pump pulley Fits 1970-78 Mustang with 302/351W/351C 4-bolt crank pulley Single groove crank pulley Single groove water pump pulley Fits 1970-78 Mustang with 289/302/351W/351C 4-bolt crank pulley Dual groove crank pulley Single groove water pump pulley CRANKSHAFT PULLEY SPACERS Use these crankshaft pulley spacers with Ford Racing M-6316-C351 crank damper to achieve proper belt alignment on past model 5.0L and 5.8L Windsor engines. PART NUMBER ENGINE YEAR CRANK PULLEY BOLT PATTERN SPACER THICKNESS M-8510-A351 M-8510-B351 351W 1979 and earlier 4 0.350" 302 351W 1980 and later 4 4 0.950" 0.950" M-8510-C351 302 ➀ 1980 and later 4 0.875" Crankshaft Pulley Spacer M-8510-A351 351W ➀ All 4 0.875" 351 Ford Racing ➀ 4 0.875" INSTALLATION NOTES 1979 and earlier 351W with 0.917" Ford Racing crank sprocket can use spacer M-8510-A351 if 0.070" is machined from the rear of the damper hub. Early 3-bolt crank pulleys generally bolt directly to the damper (damper is drilled for 3- and 4-bolt patterns). However, sheave alignment should be checked and the pulley shimmed as necessary to correct any misalignment. NOTE: ➀ With 0.917" Ford Racing crank sprocket. 460/514 CRANKSHAFT DAMPER SPACER M-6359-D460 • Spacer with counterweight for 1979-97 external balanced 460 engines • Used on Ford Racing crate engines • Same as discontinued production service part D9TZ-6359-A 124 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. A.C. ELIMINATOR KITS M-19216-A50 Fits 1994-95 Mustang and 1991-93 Thunderbird with 5.0L engine M-19216-D46 Fits 1996-08 Mustang • • • • with 4.6L engine SOHC/DOHC Cast aluminum idler pulley bracket replaces the air conditioning compressor Removes weight from the front of car for better weight transfer when racing Bolts included Uses stock belt OFF-ROAD IDLER BRACKET (1979-93 MUSTANG) M-8604-A50* Competition air pump idler bracket for off-road use only, where air pump is not necessary. This idler is a direct bolt-on replacement for stock air pumps and uses a standard serpentine belt. Fits 302/351 Mustang applications when catalytic converters are not used. Uses stock belt. A.C. ELIMINATOR KIT M-8511-A50* Bracket conversion kit to remove air conditioning compressor for racing applications. This twopiece bracket kit moves the power steering pump up to where the A.C. compressor was. Fits 1985-93 Mustang. Requires new belt (not included). Hardware included. 351W ENGINE SWAP ACCESSORY DRIVE KITS (1985-93 MUSTANG) M-8511-A351 Power steering bracket only M-8511-B351 Power steering and M-8511-B351 M-8511-A351 UNDERDRIVE HORSEPOWER PULLEY KIT M-8509-D462* 1996-98 Mustang (Does not fit 1999-04) • Significant power increase, reduces power loss from accessories by reducing accessory pull speed • 3-piece kit with hardware and instructions • 4.6L SOHC engines • Aids acceleration by reducing accessory speed compared to crankshaft WARNING: Engine cooling will be reduced. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 125 ENGINE COMPONENTS air conditioning bracket These brackets allow use of your 5.0L front-end accessory drive components when swapping to a 351W (5.8L) engine. Simply replace production bracket with the new bracket using all existing bolts and hardware. Serpentine belt selection will vary, depending on whether or not you choose to use optional underdrive pulleys. ENGINE COMPONENTS 5.0L DAMPER KIT M-6316-M50** 302/351W CRANKSHAFT DAMPER KIT M-6316-K351** • • • • New stock replacement damper for most 1981-95 5.0L engines 50 oz.-in. balance factor Kit includes E4TZ-A damper and FITZ-A timing pointer Can be used on M-6007-B50/B51/XB3/XE3 crate motors (included with M-6670-A50) • 3.950" overall length • New stock replacement damper for most 302/ 351W engines with left-hand water pump inlet • Fits 1970-1980 302, 1970-97 351W crankshafts with external balance, 28.2 oz.-in. balance factor • 4-bolt pulley pattern • 3.950" overall length • Includes E8TZ-B damper and F1TZ-A timing pointer CRANKSHAFT DAMPERS 429/460 BILLET TIMING POINTER M-6023-A460 M-6316-A460 PART NUMBER M-6316-A50/M-6316-C351 ENGINE BALANCE M-6316-A50 NOTES M-6316-A50** M-6316-C351* M-6316-A460* M-6316-D461* MASS (LBS) 302 (1981-93) 50 oz.-in. ➀ Meets SFI 18-1 ➁ 12.1 ➂ 302/351 HO 28.2 oz.-in. ➀ Meets SFI 18-1 ➁ 11.5 ➂ 429/460 Neutral Meets SFI 18-1 10.1 4.6L 2-V Neutral Meets SFI 18-1 9.8 NOTES: ➀ Damper has removable weight that allows use as a neutral balance unit for internally balanced crankshafts. 1994-01 Mustang and Explorer require modification. ➁ Does not clear early timing chain cover with rear installed seal. ➂ 3.000" overall length. • Billet aluminum adjustable timing pointer for 429/460/514 engines • The pointer is contoured to fit with minimum clearance to the damper for reduced parallax effect when checking timing • Fits 5"-7" diameter crank dampers • Offers up to 30 degrees of pointer adjustments • Ball milled Ford Racing logo • The machine finished and clear anodized pointer includes fasteners, perfect for Street Rods 302/351W BILLET TIMING POINTERS M-6023-B351 • Billet aluminum, adjustable timing pointer for 302/351W engines • The pointer is contoured to fit with minimum clearance to the damper for reduced parallax effect when checking timing • It is designed for an 11 o’clock TDC location with considerable adjustment range for accurate positioning • Ball milled Ford Racing logo • The machine-finished and clear anodized pointer includes fasteners, perfect for Street Rods M-6023-C351 • Billet aluminum, adjustable timing pointer for 302/351W engines • The pointer is contoured to fit with minimum clearance to the damper for reduced parallax effect when checking timing • It is designed for a 10 o’clock TDC location with considerable adjustment range for accurate positioning • Ball milled Ford Racing logo • The machine-finished and clear anodized pointer includes fasteners, perfect for Street Rods 126 Techline (800) FORD788 Did you know… 1968-80 302 engines were built with a 28-ounce imbalance factor. 1981-01 302 engines were built with a 50-ounce imbalance factor. 1969-97 351W engines were built with a 28-ounce imbalance factor. 1970-74 351C engines were built with a 28-ounce imbalance factor. NOTE: Severe engine damage will result if you use the wrong flywheel or damper on your engine. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. THE BOSS IS BACK BOSS 302 VALVE COVER SET M-6582-BOSS302 • BOSS 302 style valve covers that fit 289/302/351W cylinder heads • Used on Ford Racing BOSS 302 block based crate engines • Cast aluminum with black wrinkle finish • Fits most 289/302/351W cylinder heads and rocker arm combinations • With PCV and breather grommets • 50-States Legal when installed with appropriate closed PCV hardware • Does not fit EFI • Boss 302 style valve covers that fit 289/302/351W cylinder heads • Used on the Ford Racing BOSS 302 engine • Cast aluminum with black wrinkle finish • Fits most 289/302/351W cylinder head and rocker arm combinations • With PVC and breather grommets • 50-States Legal when installed with appropriate closed PVC hardware • Does not fit EFI *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com ENGINE COMPONENTS BOSS VALVE COVER SET M-6582-BOSS** 127 ENGINE DRESS-UP COMPONENTS CUSTOM VALVE COVERS Give your Ford that fast, furious look with custom-designed Ford Racing valve covers. All are baffled, and you can choose from a variety of finishes and distinctive logos. “Tall” Ford Racing valve covers M-6582-E302P/R302/T351/Z351/R351/C460/R460 are designed to clear roller rocker arms and polylock nuts. None of the other valve covers can be used with roller rockers without modifications. None of the valve covers on pages 128 and 130 can be used on engines with electronic fuel injection, except M-6582-D302. See page 129 for EFI valve covers. Most of the valve covers on pages 128-130 are “50 States Street Legal” when installed with appropriate closed PCV hardware (included in package). BLACK SATIN VALVE COVERS M-6582-A** POLISHED ALUMINUM VALVE COVERS M-6582-F301** CHROME STAMPED STEEL VALVE COVERS M-6582-B303R** For 289/302/351W For 289/302/351W For 289/302/351W BLACK SATIN VALVE COVERS M-6582-A301R** BLACK SATIN VALVE COVERS M-6582-F302** For 289/302/351W (Original open letter Cobra) BLACK VALVE COVERS • M-6582-L302* 3.75" Tall with red letters • For 302/351W For 289/302/351W POLISHED ALUMINUM VALVE COVERS M-6582-A302R** POLISHED ALUMINUM VALVE COVERS M-6582-F303** CHROME (DIE CAST) VALVE COVERS M-6582-D302** 1986-93 For 289/302/351W For 289/351W (Original open letter Cobra) For 302 EFI BLACK SATIN VALVE COVERS M-6582-B301** For 289/302/351W POLISHED ALUMINUM VALVE COVERS M-6582-E302P* 3.75" Tall with black letters CHROME ALUMINUM VALVE COVERS M-6582-R302* 3.75" Tall with black letters For 289/302/351W (Will clear stud girdle and roller rocker arms) 128 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. EFI VALVE COVERS You can choose from a unique selection of Ford Racing valve covers, specially designed to provide clearance for EFI intake manifolds. None of the other valve covers can be used with roller rockers without modifications. M-6582-D302 for 5.0L/302 EFI engines consists of a pair of valve covers only, featuring a lustrous chrome finish. The valve covers are available in either black satin or polished aluminum, and include a pair of valve covers and an oil filler cap. You can equip your 5.0L/302 EFI engine with three different styles (“Cobra,” “Mustang” or “Ford Racing”). Only one style (“Ford Racing”) is available for the 5.0L/302 EFI and 5.8L/351 EFI truck engine. BLACK SATIN VALVE COVERS M-6000-C302** 1986-93 POLISHED ALUMINUM VALVE COVERS M-6000-F302** 1986-93 EFI TRUCK VALVE COVERS M-6582-A351R** Black Satin For 5.0L/302 EFI (Original open letter Cobra) For 5.0L/302 EFI • Fits 5.0L EFI and 5.8L EFI engines • Die-cast aluminum with raised “Ford Racing” logo • Includes chrome oil filler tube and cap • Available in “Black Satin” For 5.0L/302 EFI (Original open letter Cobra) POLISHED ALUMINUM VALVE COVERS M-6000-K302R** 1986-93 For 5.0L/302 EFI ENGINE COMPONENTS POLISHED ALUMINUM VALVE COVERS M-6000-D302** 1986-93 DISTRIBUTOR HOLD-DOWN CLAMP M-12270-A302 2.3L HSC, V-6 & V-8 exc. “FE” BLACK SATIN VALVE COVERS M-6000-E302** 1986-93 BLACK SATIN VALVE COVERS M-6000-J302R** 1986-93 For 5.0L/302 EFI For 5.0L/302 EFI IGNITION COIL BRACKET M-12044-A2 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 129 ENGINE DRESS-UP COMPONENTS BLACK SATIN VALVE COVERS M-6582-A341R** POLISHED ALUMINUM VALVE COVERS M-6582-Z351* 4" Tall For 302 BOSS/351C/351M/400 For 302 BOSS/351C/351M/400 with new logo (Will clear stud girdle and roller rocker arms) ENGINE DRESS-UP KIT M-6000-A302R** For 289/302/351W Windsor carbureted engines only with Ford Racing logo CHROME ALUMINUM VALVE COVERS M-6582-R351* 4" Tall POLISHED ALUMINUM VALVE COVERS M-6582-A342R** For 302 BOSS/351C/351M/400 with new logo (Will clear stud girdle and roller rocker arms) For 302 BOSS/351C/351M/400 CHROME STAMPED STEEL VALVE COVERS M-6582-C351R** BLACK SATIN VALVE COVERS M-6582-B** For 352/360/390/427/428 For 302 BOSS/351C/351M/400 CHROME STAMPED STEEL VALVE COVERS M-6582-A390R** For 352/360/390/427/428 POLISHED ALUMINUM VALVE COVERS M-6582-C460* 4.5" Tall • For 429/460 with new logo • (Will clear stud girdle and roller rocker arm) For modular valve covers, see page 79. POLISHED ALUMINUM VALVE COVERS M-6582-A427** For 352/360/390/427/428 CHROME ALUMINUM VALVE COVERS M-6582-R460* 4.5" Tall CHROME STAMPED STEEL VALVE COVERS M-6582-A429R** M-6582-CC • For 429/460 with new logo • (Will clear stud girdle and roller rocker arm) For 429/460 M-6582-C 130 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. BREATHER CAPS M-6766-A302* M-6766-B302* M-6766-G302** Twist Type Push-In Type Push-In Type M-6766-A302* M-6766-B302* M-6766-G302** Open Crankcase Open Crankcase Closed Crankcase UNIVERSAL VALVE COVER BREATHER CAP GROMMETS M-6892-F BILLET PAINTED OIL FILL CAP COVER FOR 4.6/5.4/6.8L M-6766-MP46 • • • • ENGINE COMPONENTS • Kit includes one (1) grommet for push in breather cap and one (1) for a PCV valve • Grommets fit all Ford Racing valve covers for pushrod engines • Converts twist-in breather valve cover to push-in style breather WASHABLE BREATHER CAPS M-6766-K302* Shielded push-in type for 1.25" dia. hole M-6766-H302* Non-shielded push-in type for 1.25" dia. hole Fits all years of modular engine Installs over factory plastic oil fill cap (not included) Features Ford Racing logo painted in blue and red Clear coated M-6766-K302 shown FORD GT BILLET OIL FILL CAP M-6766-GT FUEL PUMP BLOCK-OFF PLATE M-9351-A302 • Ford GT oil fill cap with billet cover • Direct replacement for Ford GT oil fill cap, fits most 1986-2004 Mustang GT • GT logo machined into cap surface • Chrome plated • All V-8 except 351C/351M/400 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 131 ENGINE DRESS-UP COMPONENTS Show off your engine compartment with this dazzling, head-turning collection of Ford Racing accessories. Many are unique items. All give your car a personal touch. BILLET ALUMINUM FORD AIR CLEANER NUT M-9697-E OVAL AIR CLEANER ASSEMBLY M-9600-C302* Cobra logo M-9600-E302* Ford Oval logo M-9600-K302* Mustang logo • CNC machined billet aluminum construction • Features the Ford oval in blue paint • For single 4V carburetors • Assembly height is 2.5" BILLET ALUMINUM FORD RACING AIR CLEANER NUT M-9697-F AIR CLEANER WING NUTS M-9697-A Ford Logo M-9697-C Mustang Logo • CNC machined billet aluminum construction • Features the “Ford Racing” logo in red and blue paint A.T. DIPSTICK/TUBE M-6750-D303 C-4 M-6750-E303 C-6 AIR CLEANER ASSEMBLY M-9600-A302R* 13" diameter • Fits 2V and 4V • Uses Motorcraft Element PN FA-612 ROUND AIR CLEANER ASSEMBLY M-9600-M302* 13" diameter • Fits 2V and 4V carburetor • Die-cast with black satin finish and Mustang logo ENGINE OIL DIPSTICK/TUBE WITH KNURLED HANDLE M-6750-B302 1962-78 only For 289/302/351W 132 Techline (800) FORD788 ENGINE OIL DIPSTICK/TUBE M-6750-A302 1962-78 only For 289/302/351W M-6750-C303 Curved For 1983-93 5.0L Mustang *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. COOLING SYSTEMS HIGH-TEMPERATURE BLUE SILICONE RADIATOR HOSE KIT M-6052-B Fits 1986-93 5.0L Mustang Six high-quality molded hoses for upper and lower radiator, thermostat bypass, three heater core hoses for A/C equipped Mustangs. Original equipment on police package Mustangs. Fits better than the other kits with unmolded hoses. Includes 12 special hose clamps with inner band for silicone hoses. HD TRANSMISSION OIL COOLER KIT (SELF-REGULATING) M-7095-SR • Fits 1979-93 V-8 Mustang applications • Improves cooling, better than a 3-core copper/brass radiator • Saves weight on the front end • Has cooler for auto transmission or power steering • Easily installed, modification required Call the Techline for a fax copy of the instruction sheet. ALUMINUM MUSTANG COBRA RADIATOR M-8005-C03** • Original equipment on the 2003 Mustang Cobra • Easy bolt-in installation • Fits 1997-04 V-8 Mustangs with manual transmission NOTE: Will fit 1996 Cobra that has factory cooling system update. ENGINE COMPONENTS Unique patented “stacked-plate” design offers 35% improvement in efficiency over fin-and-tube coolers. The .75" x 7.25" x 11" unit weighs only 2.5 lbs., but has a full 18,000 lbs. GVW rating. The self-regulating design feature bypasses cold transmission fluid automatically (without thermostats or valves) until its viscosity decreases and allows fluid to flow through the main body of the cooler. SAE thread fittings. ALUMINUM RADIATOR M-8005-C* 1979-93 Mustang 2005-06 MUSTANG HIGH-PERFORMANCE RADIATOR M-8005-S197* FORD GT COOLANT OVERFLOW CAP M-8006-GT • • • • • Fits 2005-06 Mustang GT. Does not fit 2007 Thermally efficient up to 700 horsepower Uses OEM fan and mounting points 2.25" Core thickness All aluminum construction • Ford GT coolant overflow cap with billet cover • “GT” logo machined in cap surface • Fits both coolant overflow and intercooler reservoir *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 133 ELECTRONIC FUEL INJECTION HIGH-FLOW RATE FUEL INJECTOR SETS PCM calibration data for each model of injector is available on our website. PART NUMBER (SETS OF 8) FLOW RATE BODY STYLE IMPEDANCE LENGTH CONNECTOR M-9593-C302* M-9593-M23* M-9593-A302* M-9593-B302* M-9593-T46* M-9593-M39* M-9593-F302* M-9593-G302* M-9593-LU60* M-9593-E303* 19 lb./hr. EV1 11-18 ohms L Jetronic/Minitimer 23 lb./hr. EV6 11-18 ohms L USCAR 24 lb./hr. EV1 11-18 ohms L Jetronic/Minitimer 30 lb./hr. EV1 11-18 ohms L Jetronic/Minitimer 34 lb./hr. EV6 11-18 ohms L USCAR 39 lb./hr. EV6 11-18 ohms L USCAR 42 lb./hr. EV1 11-18 ohms L Jetronic/Minitimer 47 lb./hr. EV14 11-18 ohms M USCAR 60 lb./hr. EV6 11-12 ohms L USCAR 160 lb./hr. EV1 4-6 ohms L Jetronic/Minitimer All injector flow rates are quoted at a delta pressure of 39.15 psi. To convert to a delta pressure of 43.5 psi, multiply flow rate by 1.054. INJECTOR ADAPTER KITS M-14464-U2J CONNECTORS • Adapts USCAR style harness to Jetronic/Minitimer style injector • Packaged in sets of (8) M-14464-A8* Jetronic/ Minitimer USCAR • Adapts Jetronic/Minitimer style harness to USCAR style injector • Packaged in sets of (8) BODY STYLE M-14464-A8 shown EV1 EV14 EV6 LENGTH EV1 EV6 Long 134 Techline (800) FORD788 EV14 Long Medium *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PROPERLY SELECTING ELECTRONIC FUEL INJECTION COMPONENTS One of the more commonly misunderstood aspects of Electronic Fuel Injection (EFI) is how to select the correct size fuel injectors, fuel pump and Mass Air Flow (MAF) sensor for a particular engine horsepower output. The following information is intended to offer a very brief tutorial on properly selecting the most common EFI components. FUEL INJECTORS First and foremost, adding larger fuel injectors alone will NOT create extra horsepower! The addition of larger fuel injectors should only be considered when your engine has exceeded the horsepower capacity of the existing fuel injectors, at which point larger injectors are then required to SUPPORT the additional horsepower. If you add larger than stock injectors to an otherwise stock engine, you should not expect any horsepower increase whatsoever. The nominal injection pressure for most Ford EFI systems is 39.15 psi “across the injector”. The term “across the injector” takes into account manifold pressure as well as fuel rail pressure, and is usually referred to as “delta pressure” (see “Measuring Fuel Pressure” for more details). Ford Racing’s fuel injectors are also rated at 39.15 psi delta, so the fuel injector sizing discussions found below will assume a fuel pressure of at least 39.15 psi delta. If you are trying to compare injector flow rates and you have flow data at one delta pressure, you can easily calculate the flow rate at a different delta pressure as follows: Flow rate at new delta pressure = flow rate at old pressure * √(new pressure/old pressure) Example: What is the flow rate for an injector at 43.5 psi if it is rated at 60 lb./hr. at 39.15 psi? Flow rate at 43.5 psi delta = 60 * √(43.5/39.15) = 63.2 lb./hr. You can use the following information to properly determine what size injectors are needed for various applications. For this example, we will use a naturally aspirated 5.0L V-8 engine making 300 hp. Keep in mind that this is FLYWHEEL (also known as brake) horsepower, NOT wheel horsepower. Engines require a certain fuel flow rate that is generally measured in lb/hr (pounds per hour) and can be calculated via knowledge of its Brake Specific Fuel Consumption (BSFC). By definition, BSFC represents how much fuel (in lb) is required per hour per each brake horsepower the engine produces. Most naturally aspirated production gasoline engines generally operate on a 0.42 to 0.52 lb/hphr BSFC at wide open throttle (WOT). High-performance and race engines (12.5:1 compression ratio and higher), which tend to be extremely efficient, can sometimes have a BSFC as low as 0.38 to 0.42. More clearly stated, this means that if you have an engine that *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 135 ENGINE COMPONENTS There are some exceptions to the above mentioned nominal injection pressure. In relatively recent years, emissions regulations have become so stringent that the government is now regulating the emissions output that gasoline vehicles are allowed to produce even when the engine is not running! This is referred to as “evaporative emissions” and results from unburned hydrocarbons (raw fuel) emitting into the atmosphere from the fuel tank, fuel lines, injector leakage, intake manifold, etc. when the engine is shut off. This is the fundamental purpose of the charcoal canister (and hydrocarbon trap in the air-box on some vehicles) and is also the reason that Ford switched to the Returnless Fuel Systems (RFS) found in production vehicles today. These systems have only a fuel supply line from the tank to the engine, with no return line. The primary reason for these systems is that evaporative emissions increase as the temperature of the fuel in the tank increases. On a conventional return system, the fuel is sent to the engine through the supply line, and the excess is returned (via the fuel pressure regulator) to the tank through the return line. Since the engine is hot, this process heats up the fuel and thus increases evaporative emissions. To combat this, the returnless fuel systems were invented. Currently, Ford uses 2 primary types of RFS which are called Electronic Returnless Fuel System (ERFS), and Mechanical Returnless Fuel System (MRFS). The latter is the simpler of the two systems and controls the fuel rail to a constant pressure via a regulator in the tank, which is typically set to around 60 psi. The powertrain control module (PCM) then calculates the pressure across the injector either by inferring or measuring manifold pressure and subtracting from what it knows is the rail pressure set-point. ERFS, on the other hand, has no mechanical regulator at all, but instead has a Fuel Rail Pressure Transducer (FRPT) mounted on the fuel rail that measures fuel rail pressure relative to manifold pressure and feeds that information back to the PCM. The PCM then controls the Fuel Pump Driver Module (FPDM) which in turn varies the voltage to the fuel pump (or pumps) in the tank to supply the correct pressure and flow rate to the injectors. Most of the time this pressure is maintained at 39.15 psi delta, but when the fuel temperature rises, this pressure can be boosted in order to delay the onset of boiling the fuel. Some vehicles also boost the pressure under some conditions in order to get away with using smaller flow-rate fuel injectors for various reasons beyond the scope of this tutorial. Both V6 and V8 Mustangs have used ERFS since the 1999 model year and continue to do so today. The purpose of going into all this detail is to convey the message that if you choose your fuel injectors based on a pressure of 39.15 psi delta (which is the pressure at which Ford Racing specifies the flow rate), the injectors will be correctly sized regardless of which fuel system you actually have, and also to show you that fuel pressure on ERFS vehicles can change based on a number of conditions. These concepts will be important in the rest of this tutorial. ELECTRONIC FUEL INJECTION PROPERLY SELECTING ELECTRONIC FUEL INJECTION COMPONENTS (continued...) makes 300 brake horsepower, its total maximum fuel requirement in lb./hr. can be calculated as follows: fuel flow requirement = brake horsepower x BSFC Example: A 300 hp naturally aspirated V8 requires what size fuel injector? First, assume a BSFC of 0.50 lb./hr. and injection pressure of 39.15 psi across the injector. 300 hp x 0.50 lb/hp-hr = 150 lb./hr. maximum total fuel flow requirement Since this is the total fuel flow requirement to the engine, we must now divide this by the number of injectors being used to determine the flow rate necessary for each injector so that you can select the correct size injector from this catalog. In this example, we have an 8 cylinder engine using 1 injector per cylinder, which gives: 150 lb./hr./8 injectors = 18.8 lb./hr. per cylinder So, technically, the engine only needs a 19 lb./hr. fuel injector to support 300 HP, but this will require that the injector is at nearly a 100% duty cycle in order to achieve this horsepower level. Duty cycle refers to how long the injector needs to be open (flowing fuel) in order to supply the required amount of fuel. If the injector needs a 100% duty cycle at a particular engine speed and load to inject enough fuel, that means it is open all the time. Under most conditions, fuel is injected when the intake valves are closed, which helps with fuel atomization and efficiency. If the injectors need to be on 100% of the time to supply enough fuel, this means that some fuel is being injected while the intake valves are open. Depending on the overlap of the cam in the engine, some of this unburned fuel can be blown right past the exhaust valve, or be poorly atomized, which makes for a less efficient combustion process. Although running an injector at 100% duty cycle will not harm the injector itself in any way, it does not allow an adequate “cushion” for issues such as when the weather gets cooler, or the barometric pressure increases. This is because the inlet air will be denser which means the engine will receive more air, and therefore make more power than it normally would. Under these circumstances, the 19 lb./hr. injectors may no longer flow enough fuel. That’s why we generally recommended selecting an injector with a flow rate sufficiently high that it will not be required to exceed an 80% to 90% duty cycle. So to figure out what size fuel injector will result in a 90% duty cycle, divide the original result by 0.90: 18.75 lb./hr./0.90 = 20.83 or ~ 21 lb./hr. requirement Since the next popular injector size available is 24 lb./hr., this is the correct size injector that you should choose for this particular application. Keep in mind that this discussion assumes your fuel pump, lines, regulator, etc. are sufficient to be able to maintain at least 39.15 psi across the injector at all engine speeds and loads (even under boost, if applicable). Now that you have selected an injector, the calibration (or “tune”) in the PCM must either be changed or a different MAF must be used (see “Mass Airflow Sensors” below for more details). This calculation can also be reversed to give the maximum safe hp a set of injectors can support. The following guide is a general rule of thumb for sizing fuel injectors on an 8 cylinder engine using a BSFC of 0.50. Forced induction engines typically range from a BSFC of 0.55 to 0.65, with the latter value arising from the fuel enrichment necessary to keep exhaust temperatures below 1650 deg F. Example: max safe hp = [ (injector size) x (total # of injectors) x (max duty cycle) ]/BSFC Naturally Aspirated: (19 lb x 8 x .9) / .50 = 273.6 or approx 275 hp @ 90% duty cycle Forced Induction @ 0.55: (19 lb x 8 x .9) / .55 = 248.7 or approx 250 hp @ 90% duty cycle Forced Induction @ 0.65: (19 lb x 8 x .9) / .65 = 210.5 or approx 210 hp @ 90% duty cycle Injector Flow Rate 19 lb./hr. 24 lb./hr. 30 lb./hr. 39 lb./hr. 42 lb./hr. 47 lb./hr. 60 lb./hr. Naturally Aspirated hp 275 hp @ 90% Duty Cycle 345 hp @ 90% Duty Cycle 430 hp @ 90% Duty Cycle 560 hp @ 90% Duty Cycle 605 hp @ 90% Duty Cycle 675 hp @ 90% Duty Cycle 860 hp @ 90% Duty Cycle Forced Induction hp (@ 0.65) 210 hp @ 90% Duty Cycle 265 hp @ 90% Duty Cycle 330 hp @ 90% Duty Cycle 430 hp @ 90% Duty Cycle 465 hp @ 90% Duty Cycle 520 hp @ 90% Duty Cycle 665 hp @ 90% Duty Cycle Note: A BSFC of 0.65 may result from a richer air fuel ratio than is actually required by the engine for optimal horsepower, but this is sometimes necessary in order to maintain a safe exhaust gas temperature which, if too high, could potentially damage the exhaust valves or catalytic converters. FUEL PUMPS Most EFI fuel pumps are rated for flow at 12 volts @ 40 psi. Most vehicles’ charging systems operate anywhere from 13.2 V to 14.4 V. 136 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PROPERLY SELECTING ELECTRONIC FUEL INJECTION COMPONENTS (continued...) The more voltage you feed a pump (for a given current), the faster it spins, resulting in a higher output of fuel from the same fuel pump. Rating a fuel pump at 12 V should offer a fairly conservative fuel flow rating allowing you to safely determine the pump’s ability to supply an adequate amount of fuel for a particular application, assuming the gauge of wire feeding power to the pump is sufficient to carry the current required. As previously mentioned, engines actually require a certain mass of fuel, NOT a certain volume of fuel per hour per horsepower. This can offer a bit of confusion since most fuel pumps are rated by volume, and not by mass. To determine the proper fuel pump required, a few mathematical conversions will need to be performed using the following information. There are 3.785 liters in 1 US gallon and 1 gallon of gasoline (0.72 specific gravity @ 65° F) weighs 6.009 lb. An additional important note to consider regarding the BSFC is that the specific gravity of the fuel that you are using is EXTREMELY important. The fuel that you put in your car should only be obtained from a source which supplies fuel intended for an automobile. Some people make the mistake of using aviation fuel (sometimes referred to as “Av Gas”), thinking that the higher octane of this fuel may offer a performance gain. The problem is that TRUE aviation fuel has a much lower specific gravity (commonly as low as 0.62 to 0.65) than automotive grade fuel (0.72 to 0.76). Herein lies the problem: As previously stated, an engine requires a certain mass of fuel per hour per horsepower, and 1 gallon of aviation gasoline has a lower mass than 1 gallon of automotive gasoline. Since the specific gravity of aviation gasoline is only about 90% that of automotive gasoline, your engine will run approximately 10% lean by using aviation gasoline. It is always a good idea to apply a safety factor to account for things such as pump to pump variability, voltage loss between the pump and the battery, etc., so we recommend you multiply the final output of the fuel pump by 0.90 to determine the capacity of the fuel pump at 90% output to be on the safe side. ENGINE COMPONENTS To determine the overall capacity of a fuel pump rated in liters per hour (L/hr), use the following additional conversions: Do: To Get: (L/hr)/3.785 ➔ US gallons/hr Multiply above by 6.009 lb/gallon ➔ lb/hr Multiply above by 0.9 ➔ Capacity in lb./hr. at 90% Divide above by BSFC ➔ “Horsepower Capacity” (flywheel) So for a fuel pump rated at 110 L/hr for example, supplying a naturally aspirated engine: 110/3.785 = 29.06 US gallons/hr 29.06 x 6.009 = 174.62 lb./hr. 174.62 x 0.9 = 157 lb./hr. @ 90% Capacity 157/0.5 = 314 hp safe naturally aspirated “Horsepower Capacity” Safe “Horsepower Capacity” @ 40 psi with 12 V assuming 0.5 lb/hp-hr BSFC 60 L/hr pump = 95 lb./hr. X .9 = 86 lb./hr., safe for up to 170 naturally aspirated flywheel hp 88 L/hr pump = 140 lb./hr. X .9 = 126 lb./hr., safe for up to 250 naturally aspirated flywheel hp 110 L/hr pump = 175 lb./hr. X .9 = 157 lb./hr., safe for up to 310 naturally aspirated flywheel hp 155 L/hr pump = 246 lb./hr. X .9 = 221 lb./hr., safe for up to 440 naturally aspirated flywheel hp 190 L/hr pump = 302 lb./hr. X .9 = 271 lb./hr., safe for up to 540 naturally aspirated flywheel hp 255 L/hr pump = 405 lb./hr. X .9 = 364 lb./hr., safe for up to 720 naturally aspirated flywheel hp Very Important Note: For any type of forced induction engine, the above maximum power levels will be reduced because as the boost pressure increase, the fuel pressure required from the pump also increases, creating an additional load to the fuel pump, which results in a decreased fuel flow rate at the higher pressure. In order to do proper fuel pump sizing for these applications, a fuel pump map is required, which shows flow rate versus delivery pressure for a given voltage. That is, a 255 L/hr pump at 40 psi may only supply 200 L/hr at 58 psi (40 psi plus 18 lbs of boost). Additionally, if you use a fuel supply line that is not large enough, this can result in decreased fuel flow due to the pressure drop. That is, 255 L/hr at the pump may only result in 220 L/hr at the fuel rail because as the required pressure increases (due to the pressure loss from the supply line restriction), the maximum flow rate of the pump decreases. MEASURING FUEL PRESSURE The above fuel pump sizing information should be regarded as a guideline in selecting the size of pump you need. Once installed in *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 137 ELECTRONIC FUEL INJECTION PROPERLY SELECTING ELECTRONIC FUEL INJECTION COMPONENTS (continued...) the car, you still need to verify that adequate fuel pressure (at least 39.15 psi across the injector) is maintained at all engine speeds and loads. Do not skip this fuel pressure verification step, as failure to maintain adequate fuel pressure can cause issues ranging from calibration difficulty to engine failure due to running lean. As mentioned earlier, all injector flow rates published in this catalog have been determined at a pressure of 39.15 psi (270 kPa) across the injector, but what does the phrase “across the injector” mean? To understand this fully, we first need to discuss three different methods of measuring pressure. The first is called absolute pressure. This is defined as the pressure relative to a complete vacuum, such as would be found in outer space. For instance, atmospheric pressure (the air we breathe) is typically around 14.7 psi absolute at sea level, depending on temperature and weather conditions. To help further understand absolute pressure, an example can be derived from considering the following: 14.7 psi is equivalent to 29.92 inHg. An engine that has a vacuum signal of 12 “inches” simply means that the absolute pressure in the intake manifold is 12 inHg less than the atmospheric pressure. When you subtract the 12 inHg from the atmospheric pressure of 29.92 inHg, we still have a positive pressure of 17.92 inHg, or roughly 9 psi absolute as compared to a complete vacuum. Sometimes you will see absolute pressure in psi written as “psia”. The second is called gage pressure, which is pressure relative to atmospheric pressure. Gage pressure is what everyone is most familiar with, because it is what you measure when you check the air in your tires or when you connect a fuel pressure gage to the fuel rail. An engine which makes 6 lbs of boost at sea level is actually equivalent to 20.7 psi absolute (14.7 + 6 = 20.7). Sometimes you will see gage pressure in psi written as “psig”. The third is called delta pressure and is very much like gage pressure, but instead of being relative to atmospheric, it can be relative to any other pressure. Sometimes you will see delta pressure in psi written as “psid”. When we quote pressure “across the injector”, what we really mean is the delta pressure (or difference) between the fuel rail and the intake manifold. On most EFI systems (non-MRFS), this is the pressure that the system controls, either by use of a mechanical regulator referenced to the intake manifold (in a traditional or “return” system), or by the use of the FRPT and the PCM (in ERFS). This means that if you connect a fuel rail pressure gage to the fuel rail on one of these systems, you will see fuel pressure vary depending on intake manifold pressure. This is because the gage is measuring gage pressure, which is relative to atmospheric, but the EFI system is controlling the fuel rail pressure relative to intake manifold pressure which is changing depending on engine load (your right foot). On a naturally aspirated engine, the manifold pressure at idle is typically around 10 psia, and the manifold pressure at Wide Open Throttle (WOT) will be atmospheric, so typically at the fuel rail you will see approximately 30 psig at idle and at least 39.15 psig at WOT, depending on whether or not you have ERFS and whether or not it is boosting pressure for one of the reasons mentioned in the previous section. On a forced induction engine, the highest manifold pressure that the engine can reach will be atmospheric plus the maximum boost your configuration can obtain. This means that to keep 39.15 psid across the injector, the gage pressure will have to increase by the same amount as the maximum boost. A couple of examples should make these concepts more clear. First, consider a naturally aspirated conventional (non-ERFS, non-MRFS) EFI system with a mechanical regulator set at the stock pressure setting. The system will try to keep the pressure across the injector at 39.15 psid regardless of engine load, so if you have a fuel pressure gage attached to the fuel rail, you will see a maximum pressure of 39.15 psig at WOT if the system is doing its job properly. Now consider a forced induction engine making a maximum of 10 psig boost, also with a conventional EFI system and mechanical regulator set to the stock pressure setting. The system will still try to keep the pressure across the injector at 39.15 psi, so this time your fuel pressure gage attached to the rail should read a maximum of 39.15 + 10 = 49.15 psig. If it never gets to 49.15 psig at WOT, your fuel system is inadequate for your engine. You will need to either increase the capacity of the pump, minimize the voltage loss between the pump and the battery, or decrease the pressure loss between the pump and the engine through the use of larger lines, etc., and re-test. Do not try to tune “around” this type of fuel delivery problem. It will bite you in the long run, and can result in engine failure. Note that at WOT, the fuel pump in the forced induction engine must supply fuel at a higher pressure than in the naturally aspirated engine. As mentioned in the previous section, this means that the fuel pump supplying the forced induction engine will have a lower maximum flow rate capability than the fuel pump supplying the naturally aspirated engine. This is a critical concept to grasp because it means that in general, for engines with equal brake horsepower, the fuel pump supplying the forced induction engine will need to have more capacity than the fuel pump supplying the naturally aspirated engine! MASS AIRFLOW SENSORS On EFI systems that use a MAF sensor, this is the single most important sensor on the engine for determining a proper air/fuel (A/F) ratio. Unfortunately, it is also one of the most misunderstood sensors on the engine as well. The engine’s air/fuel ratio and spark 138 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. PROPERLY SELECTING ELECTRONIC FUEL INJECTION COMPONENTS (continued...) advance are determined by the PCM primarily from the input received from the MAF sensor. This is also why it is of critical importance that there are no air leaks (defined as air entering the intake stream between the MAF and the combustion chamber) in a MAF based system. Air leaks can cause a check-engine light, rough idling, spark knock, drivability issues, and in extreme cases, complete engine failure, depending on their magnitude. A different MAF sensor should only be considered after engine modification which either causes the stock sensor to become a flow restriction or when the stock MAF sensor electronics are insufficient to measure the airflow that the modified engine is capable of ingesting. This latter point is critical in understanding when a MAF needs to be replaced. It is possible to have 2 MAF sensors that are equal in size, but capable of different maximum power levels. This is because the electronics in each MAF are different and are capable of measuring different maximum airflow, despite the fact that the size of the MAF housing is the same. That is, you can have two different 90 mm MAF sensors but one will be capable of measuring 60 lb./min. of air, while the other can measure say, 100 lb./min. of air. They both present the same airflow restriction (which is dictated primarily by their physical size) but they are definitely NOT interchangeable. So how do you know how much air your MAF needs to be capable of measuring? If you have an approximation of the engine’s BSFC at WOT, as well as a target air/fuel ratio in mind, then the amount of air that your MAF sensor needs to be capable of measuring (in lb./hr.) can be calculated as follows. Note that this formula includes a safety factor of 10%. Max airflow = 1.1 * (Power * BSFC * A/F Ratio) Example: What is the max airflow a naturally aspirated 300 hp engine will ingest? First, assume a BSFC of 0.50 lb./hr., and AFR of 12:1. Max airflow = 1.1 * (300 * 0.50 * 12) = 1980 lb./hr. Now that we know the minimum size fuel injector and MAF that we need, we have to consider what the PCM will do with this new hardware. The two main methods of dealing with the installation of a new MAF and injectors are to either “trick” the PCM by careful selection of injectors and a “matched” MAF, or by changing the calibration in the PCM to match the MAF and injectors that you selected. The second method requires the ability to alter the calibration inside the PCM, generally through the use of one of the aftermarket tools available. When using this method, the actual flow data for the injector (available on our website), as well as the “transfer function” for the MAF are entered into the calibration in the PCM. Generally, it is recommended to test the new calibration on a dynamometer to ensure that the engine receives the correct A/F Ratio at all speeds and loads. Provided this is performed by a competent tuner, this is the best method and will result in the best part-throttle drivability and idle, and the least amount of trouble with check-engine lights, returnless fuel, electronic throttle monitors, etc. Prior to tuning on a dyno, you should be absolutely certain that the ground circuits for the EFI system are in pristine condition. Doing so will help to ensure that the calibration you and your tuner develop on the dyno will also work when you leave. It can’t be overstated that prior to the vehicle being tuned in any way, all vacuum leaks, electrical issues, etc., need to be resolved. Fixing them before you go to the dyno will always be cheaper than paying for dyno time while you’re wrenching on your car. As a general rule of thumb, the following stock Ford MAF sensors will support the corresponding horsepower: MAF Sensor 55 mm (Stock 88-93 Mustang) 70 mm (Stock 94-95 Mustang) 80 mm (Stock Ford) 90 mm (M-12579-54) Approximate max hp 275 hp 350 hp 425 hp 540 hp *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 139 ENGINE COMPONENTS The first method requires a MAF sensor that has been “curved” to a certain flow rate of injector. For instance, let’s say your engine originally came with 19 lb./hr. injectors and you replaced them with 39 lb./hr. injectors. To use this method, you will need a MAF with electronics that have been modified such that it will output a signal proportional to an airflow that is 19/39 times as great as the stock MAF would measure. This will result in the PCM delivering the correct amount of fuel despite the fact that the injector size has been increased from 19 lb./hr. to 39 lb./hr. The downside of this method is that many other variables such as spark advance are determined from the MAF sensor through a parameter called “load”. For a given engine RPM, as load increases, required spark advance decreases. Since, by using this method, the MAF outputs a signal that is lower than the stock MAF, the calculated load will also be lower. This means that commanded spark advance will be higher than it should be, which can potentially result in spark knock, and other concerns. While this method works quite well on less sophisticated electronics, such as EEC-IV, it is recommended that this method be complemented with a vehicle “chip” tune on vehicles 1996 and newer. ELECTRONIC FUEL INJECTION MUSTANG GT DUAL FUEL PUMP KIT M-9407-GT05 2003-04 MUSTANG COBRA FUEL PUMP M-9407-C46 • Fits 2005-2008 Mustang GT • Includes harness, dual fuel pumps, drop-in housing and fuel pump driver module from the 2007-08 SVT Mustang • Includes all installation hardware • Highly recommended for any application making over 400 hp • Same fuel pump kit as used in the Mustang GT 500 hp supercharger kit • Stock replacement fuel pump assembly • Fits 2003-04 Mustang Cobra EFI MUSTANG FUEL PUMP M-9407-C50 (190 liters/hr.) 1986-97 LIGHTNING MASS AIR METER M-12579-L54** This high-flow, fuel tank mounted fuel pump eliminates top-end fuel starvation on modified 5.0L EFI HO engines. Production flow rates of 88 liters/hr. (1988-93, 1994 and up 110 liters/hr.) will be increased to a whopping 190 liters/hr. @ 40 psi with M-9407-C50. • Stock replacement 90 mm 2001-04 F-150 Lightning Mass Air Meter • Requires recalibration for use on other vehicles FORD GT START BUTTON KIT FOR MUSTANG M-11572-GT Easy upgrade to enhance the appearance of your 2005-08 Mustang • Fits in the existing Power Point located in the center of the dash • Turn the key to the on position then press the button • Red illumination only • Includes special wire harness for easy installation 140 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. MULTIPORT EFI WIRING HARNESS M-12071-A50* Complete Harness from PCM to Injectors! Our technical support staff travels the country to dozens of various events and takes thousands of phone calls every year. One of the most common requests regarding the Electronic Fuel Injection Wiring Harness has come from Performance Enthusiasts requesting a cleaner appearing harness and a simpler method to make connections. YOUR VOICE HAS BEEN HEARD! Ford Racing is committed to customer satisfaction and to meeting the demands and requests of its customers. We have tried to be as thorough as possible in developing a product which will provide you with the cleanest and simplest wiring harness on the market. Some of the many new features of the MultiPort EFI Wiring Harness include: • Revised for simplified installation; uses a single connector for all required connections • Kit consists of a single harness with integral connections for injectors and O2 sensors • Fully loomed, from PCM to all sensors and injectors, to save time on installation • Typical installation takes less than 1 hour • Direct fit on 1986-93 302 H.O. engines • Can be easily adapted to many other Ford V-8 pushrod engines • Requires PCM (not included) from 1989-93 Mustang 5.0L H.O. • Compatible with engines using both H.O. and non-H.O. firing orders • Provisions for electric fan control output • Kit includes compact fuse and relay box, "Check Engine" light and all necessary grommets • For a detailed list of harness support parts, see harness instruction sheet at fordracingparts.com ENGINE COMPONENTS MAIN HARNESS M-12071-C302* The foundation of Ford Racing’s Multiport EFI Wiring Harness system, this harness connects the massair flow computer to the engine, sensors and relays. 26-page instruction book included with main harness. Contains very detailed instructions, helpful hints and lots of illustrations for easy hook-up; must be used with integral thick film ignition module distributor. ENGINE HARNESSES AND CONTROLS PACKAGE M-12071-L302* • Harness and sensor package to be used with the M-12071-C302 main harness • Kit contains injector and HEGO harness • Includes Air Charge Temperature (ACT), Engine Coolant Temperature (ECT), Exhaust Gas Recirculation (EGR) sensor and valve • Use with 351W firing order • Can be used with production 1992-93 5.0L Mustang main harness *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. SENSOR AND RELAY PACKAGE M-12071-K302* Sensors for use with the M-12071-A50 and M-12071-C302 wiring harness. Kit contains dual-oxygen sensors; EGR solenoid, TAD and TAB solenoids; fuel, air-conditioning and EEC power relays. Engine-mounted and BAP sensors NOT included. www.fordracingparts.com 141 ELECTRONIC FUEL INJECTION EFI SYSTEM TIPS Always remember to disconnect the battery before doing any wiring on your vehicle! ELECTRICAL GROUNDS The single leading cause of most electrical problems is a poor ground. The ground for the fuel injection system should connect DIRECTLY TO THE BATTERY at the negative post. Using the steel chassis or engine block as a ground will commonly create excessive resistance causing the computer to function improperly. An example of how a high ground or connection resistance can have very serious effects is as follows. This particular case applies to a 2005 Mustang GT, but can easily be extended to any electronically controlled Ford vehicle: consider the case where a Powertrain Control Module (PCM) is reading a MAF sensor signal of 4.1 V (due to a high ground or connection resistance) when it should really be reading 4.3 V. This equates to a difference in measured air mass of 13%. That is, the MAF will be telling the PCM that there is 13% less air entering the engine than there really is. Let’s say this happens at WOT, where air/fuel ratio is critical not only to performance, but also to engine durability. The result is that the actual air/fuel ratio can go from a safe 12.5:1 to a potentially damaging 14.1:1, just from a 0.2 V change in the MAF return signal! All PCM sensors, not just the MAF, are affected in a similar fashion, so it is absolutely critical that all electrical connections are solid and that the grounds are reliable. The potential penalty for a bad ground can range from strange drivability issues that are difficult to diagnose all the way to a damaged engine, as in the above example. All resistance tests should be done with the ignition key in the off position. Having voltage going through the system can return a false reading of excessive resistance. Additionally, it is possible to have a ground that tests OK when the engine is cold, but not when the engine is hot. Heat increases resistance, so these tests should be performed on a warm engine when possible. To test for an adequate ground circuit in the EFI system for a 1986 to 1993 5.0L Mustang, use a Volt/Ohm meter to check the resistance of the following circuits: • To verify a proper ground to the PCM, check the resistance from pin 40 and pin 60 DIRECTLY to the negative side of the battery. Resistance should be no greater than 0.2 ohms. • To verify a proper ground to the main PCM harness, check the resistance from the MAF sensor at pin ‘B’ DIRECTLY to the negative side of the battery. Resistance should be no greater than 0.2 ohms. • To verify a proper ground to the engine harness, check the resistance from the black wire at the Throttle Position Sensor (TPS) DIRECTLY to the negative side of the battery. Resistance should be no greater than 0.3 ohms. Note that while 0.2 ohms or less is desirable, a resistance as high as 0.5 ohms is considered acceptable. Greater than 0.5 ohms is excessive and could result in drivability concerns. A weak ground connection can also cause the PCM’s internal reference voltage regulator to function incorrectly. This can be checked at the TPS by checking voltage between the black ground wire and the orange reference voltage wire. With the key on, this voltage signal should be somewhere between 4.7 V and 5.3 V. GENERAL TIPS • Whenever possible, the PCM should be mounted inside the vehicle to protect it from water damage. The PCM should also be mounted with the electrical connectors at the bottom to avoid trapping water. Some PCMs on newer model cars are mounted under the hood, but they are sealed against moisture and designed to operate in such an environment. When in doubt, mount the PCM inside the vehicle. • When setting the voltage at the TPS, you should check the voltage between the black and green wires (1986-1993 5.0L Mustang). This voltage should be somewhere between 0.96 V and 0.98 V. If the key is on while the engine is off, set the voltage at 0.96 V. If the engine is running, set it at 0.98 V. The TPS can be set by loosening the mounting screws and slightly rotating the sensor. If you are unable to achieve the proper setting, you may need to elongate the TPS mounting holes. • If you ever need to lengthen any of the harness leads for your specific application, it is strongly advised that you lengthen only one wire at a time, which will help to avoid making mistakes. • If you are using long tube headers and need to lengthen the leads of the harness to reach the Heated Exhaust Gas Oxygen (HEGO, also known as O2 or oxygen) sensors, NEVER lengthen the wires of the O2 sensor itself. These wires are made up of a unique 142 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. material and you will disrupt the signal coming from the O2 sensor even if they are soldered correctly! If you must increase the length of the leads to the O2 sensor, always lengthen the wires on the wiring harness side of the O2 sensor. Many aftermarket companies offer HEGO sensor extensions that work quite well and are a quick and easy solution to this problem. • When soldering two or more wires together, you should “tin” the bare ends to be soldered. This will prevent cold solder joints and make the process easier. “Crimp” style or “solder-less” connectors are not recommended. Over time, these have a tendency to loosen and permit corrosion. Additionally, these connectors can commonly allow short circuits to develop within the connection. Many of these problems within the harness can be difficult to locate. Always use weather-tight heat shrink over all soldered joints. • If the factory coolant tubes are not used, the Engine Coolant Temperature (ECT) sensor should be installed directly into the threaded boss in the intake manifold near the thermostat, if applicable. This is a coolant passage. • The ACT sensor should generally not be moved from the stock location. Some aftermarket companies offer ACT relocation kits while making false claims of increased horsepower by reading cooler air. While it is true that a cooler air can result in more power, this “trick” is not cooling the incoming air, but instead merely reading the temperature from a different location. This can have a negative effect on overall engine performance and drivability because the PCM was calibrated under the assumption that the ACT sensor was in the stock design location. On a forced induction engine, it is generally preferable to have the ACT sensor located after the power adder and after the intercooler, if applicable, which will simplify the calibration (“tuning”) process. Some of our FRPP supercharger kits leave the ACT sensor in the stock location upstream of the supercharger, but this was accounted for in the calibration and should not be changed. • Protect the air filter element from turbulence created by the engine cooling fan. This is commonly referred to as “fan wash”. If you are using an open element air filter on the end of the MAF sensor, it is strongly advised that you use a shield to reduce the effects of the turbulence. • An improperly functioning charging system can cause engine running problems. Under-drive pulleys spin the accessories slower meaning that they consume less power from the engine. This results in a greater net horsepower available at the flywheel, but at a cost. Normally this is not a problem, but some systems may not perform properly if you under-drive the alternator excessively, especially if you’ve increased the electrical load on the system through the use of bigger cooling fans, high-capacity fuel pump, stereo system, etc. If the alternator does not generate enough voltage to keep the system adequately charged, it can have an adverse effect on the EFI system and result in a variety of drivability issues. • The inside diameter of the fuel return line should be at least 75% of the size of the inside diameter of the fuel supply line. FUEL PUMP LOCATION A common and often overlooked problem is the location of the fuel pump or pumps. Optimally, the fuel pump should be mounted IN THE TANK to reduce the possibility of pump cavitation. Cavitation is essentially localized boiling caused by a reduction in pressure, generally occurring on the inlet side of a pump. This localized boiling results in fuel vapor bubbles which will reduce the volume of fuel the pump is capable of delivering to the engine. Any reduction in pressure or increase in temperature at the inlet side of the pump increases the chances that cavitation will occur. For this reason, it is always best to either have the pump inside the tank immersed in fuel, or (in the case of an external pump) gravity fed, which will increase the pressure on the inlet side of the pump. If the fuel pump has to “pull” the fuel, this will result in a reduction in pressure at the fuel pump inlet potentially allowing cavitation, and thus, vapor bubbles to develop. These vapor bubbles are then drawn into the fuel pump and exit the high pressure side of the fuel pump as compressed vapor. They travel the entire length of the fuel system and are expelled through the fuel injector. This can cause issues ranging from stumbles and hesitations to engine damage due to insufficient fuel delivery and lean A/F ratios. Sometimes this problem can characterize itself by only appearing when the weather gets warmer, which can confound the diagnosis of the issue. In certain cases, it may seem to only develop when driving on certain surfaces, because pavement reflects more heat than an off-road 4x4 trail. Remember, more heat and lower pressure on the inlet side of the pump mean a greater chance of cavitation, which is to be avoided whenever possible. If you are using an external mounted fuel pump, you should run a very coarse (typically around 100 micron) filter on the inlet side of the fuel pump, and a finer (typically around 10 micron) filter on the outlet side of the pump. A paper filter is NOT recommended on the inlet of the fuel pump because it can cause a restriction in fuel flow which, as mentioned previously, can lead to cavitation. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 143 ENGINE COMPONENTS • It’s best if the air filter gets cold air from in front of the radiator. If the filter is located in the engine compartment, as in many street rod applications, the inlet air temperature can be up to 60 degrees hotter than ambient which can result in a 5% torque loss from the air density decrease. The PCM will also retard ignition timing for the hotter air which can result in an additional 5-10% torque loss. Colder air is always better. IGNITION AND ELECTRICAL DISTRIBUTOR CAP AND ROTOR KIT M-12106-A302** MINI STARTER – SMALL BLOCK M-11000-A50 1.1 kw Hi-torque Starter • Fits all 1957-93 V-8 distributors (except EEC). High-performance replacement for high-energy OEM rotor and cap on 1977-93 V-8 distributors. Installation on 1957-76 distributor (which had smaller diameter cap) reduces possibility of crossfire between terminals at high RPMs • Compatible with Ford Racing ignition wire sets • Aluminum terminals • Small diameter mini-starter—great for additional header clearance • Weighs approximately 5 lbs. less than pre-1989 production starters, yet provides more cranking power • Comes with special battery cables and instructions. Must use firewall solenoid • Fits most 289/302/351W/351C engines except 164-tooth manual transmission V-8 DISTRIBUTOR CAP AND ROTOR KIT M-12106-B302** MINI STARTER – SMALL BLOCK M-11000-B51 1.4 kw Super Hi-torque Starter • Fits 1986-96 EEC/TFI distributors • Compatible with Ford Racing “wire wound” ignition wire sets • Aluminum terminals • Small diameter mini-starter—great for additional header clearance • Weighs approximately 5 lbs. less than pre-1989 production starters, yet provides more cranking power • Comes with special battery cables and instructions. Must use firewall solenoid • Fits most 289/302/351W/351C engines except 164-tooth manual transmission FORD RACING PERFORMANCE PARTS USED: FRPP Sportsman Block FRPP Hydraulic Roller Lifters FRPP Timing Chain FRPP Valve Covers FRPP Oil Pump Driveshaft Mary Lendzion’s 1998 Mustang Best ET: 9.58 @ 140 mph IHRA Modified ET Class and NMRA Bracket 1 Class 144 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 9MM SPARK PLUG WIRE SETS – “FORD RACING” Wire-wound custom ignition wire sets feature low resistance for minimum spark loss. Silicone insulation and boots withstand high temperatures and voltage loss for minimum cross-fire and are highly resistant to fuels, oils and solvents. Long-life, tough stainless steel terminals for “post” type distributor caps. Includes coil wire for socket-type coil and “Ford Racing” identification. Cylinder number appears on each wire. NEW AND IMPROVED Spark plug wires feature high-quality 9mm wire available in 4 colors: blue, black, yellow and red. PART NUMBER APPLICATION WIRE COLOR END CONFIG. M-12259-C301** M-12259-R301** M-12259-M301** M-12259-Y301** M-12259-C460** M-12259-R460** M-12259-C302** M-12259-M302** M-12259-C462** M-12259-R462** M-12259-C464** M-12259-R464** M-12259-T462** 5.0/5.8L V-8 Engine 5.0/5.8L V-8 Engine 5.0/5.8L V-8 Engine 5.0/5.8L V-8 Engine 7.0/7.5L V-8 Engine 7.0/7.5L V-8 Engine V-6 & V-8 Universal V-6 & V-8 Universal 4.6L 2V Mustang 4.6L 2V Mustang 4.6L 4V Mustang 4.6L 4V Mustang 4.6L 2V F-150 Truck Blue Red Black Yellow Blue Red Blue Black Blue Red Blue Red Blue 45º Boot 45º Boot 45º Boot 45º Boot 45º Boot 45º Boot 45º Boot 45º Boot 45º Long Boot 45º Long Boot 45º Long Boot 45º Long Boot 45º Long Boot NOTES: Universal sets can be cut to length with a crimping tool. Includes terminals for post and socket type coils, plus easy to follow instructions. Wire sets M-12259-C301/R301/M301/Y301/C302/M302 do not fit distributorless ignition system (DIS) 5.0L/302 Explorer engines. The universal wire sets do not fit distributorless ignition system (DIS). M-12259-C462/Mustang 4.6L SOHC 9 mm Wire Set SPARK PLUG WIRE LOOM HOLDER • Complete your engine dress-up with distinctive “Ford” wire dividers • Position between loom holders to keep wires neatly routed • Packaged in sets of 4 dividers each • Fits 8 mm wire • For 289/302/351W • Dress up your engine with distinctive “Ford Racing” spark plug wire loom holders that keep wires from hot exhaust manifold • Vertical-style available in “bright” chrome • 5/16" diameter bolt hole • Packaged in sets of 2 holders each • Holds 4 wires each PART NUMBER APPLICATION WIRE COLOR FITS M-12297-B02 M-12297-B03 M-12297-B04 2-Wire Divider 3-Wire Divider 4-Wire Divider Blue Blue Blue 8-10 mm 8-10 mm 8-10 mm PART NUMBER APPLICATION WIRE COLOR FITS M-12297-B14 Wire Loom Holder Blue 8-10 mm ENGINE COMPONENTS SPARK PLUG WIRE DIVIDERS CUSTOM BILLET WIRE LOOMS M-12297-L900 With Ford Oval M-12297-L901 With V-8 Logo M-12297-L903 With Mustang Logo All new billet aluminum spark plug wire looms with ball milled logos. Fits 8 mm and 9 mm wire. Keeps all wires neat and away from headers. Adjustable brackets fit all big and small block engines except FE V-8. Use universal spark plug wires (see above). *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 145 ENGINE COMPONENTS DISTRIBUTOR GEARS PART NUMBER MATERIAL COLOR DIAMETER OUTSIDE INSIDE M-12390-A Cast Iron Orange 1.249" 0.467" M-12390-B Steel None 1.249" 0.467" M-12390-C M-12390-D M-12390-E Bronze Cast Iron Bronze 1.249" 1.249" 1.249" 0.467" 0.531" 0.531" M-12390-F Steel Bronze Blue Bronze with Blue Stripe Yellow 1.249" 0.531" M-12390-G M-12390-H Cast Iron Bronze Green Bronze with Green Stripe None None None 1.421" 1.421" 0.531" 0.531" M-12390-J M-12390-K M-12390-L APPLICATION 289/302 hydraulic flat tappet engines with point-type or Duraspark distributors. ➀ 302 with steel billet and production roller camshaft with point-type or Duraspark distributors. ➀ All 289/302 engines with point-type or Duraspark distributors. ➀ All 302 hydraulic flat tappet engines with EFI. All 351W engines. ➀ All 302 hydraulic (flat or roller) tappet engines with EFI. All 351W engines. ➀ All 302/351W hydraulic roller tappet engines with EFI and 351W Duraspark distributors. ➀ All 351C/351M/400/429/460 engines. ➀ All 351C/351M/400/429/460 engines. ➀ Steel 1.421" 0.531" All 351C/351M/400/429/460 engines. ➀ Polymer 1.249" 0.467" 289/302 all camshafts with point or Duraspark distributors. Polymer 1.421" 0.531" 302 EFI/all 351W all camshafts. MATERIAL SELECTION NOTES: • Cast iron gears are compatible with cast iron camshafts (hydraulic or solid flat tappet type). IMPORTANT INSTALLATION NOTE: • Steel gears are compatible with billet steel camshafts (hydraulic roller tappet type). ➀ Distributor gears do not have pre-drilled holes. • Bronze gears can be used with either cast iron or billet steel camshafts. They are usually See instructions included with part, call the recommended by manufacturers of aftermarket billet steel solid roller tappet camshafts. Techline (800) FORD788 for a faxed copy, or visit Since the bronze is softer than cast iron or steel, it will wear at a faster rate. fordracingparts.com or see page 147. • Polymer gears are compatible with all camshafts. M-12390-D M-12390-E M-12390-J POLYMER DISTRIBUTOR GEAR FOR 289/302 M-12390-K POLYMER DISTRIBUTOR GEAR FOR 351W M-12390-L • • • • • • • • 146 For “Extreme Duty” race engines Excellent wear characteristics Can be used with billet or cast camshafts Fits 302 distributors with .467" diameter shaft Techline (800) FORD788 For “Extreme Duty” race engines Excellent wear characteristics Can be used with billet or cast camshafts Fits 302 and 351W distributors with .531" diameter shaft *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. DISTRIBUTOR GEAR INSTALLATION The following information covers the installation of a new distributor gear onto an existing distributor. When replacing the distributor gear, it is important that you choose the appropriate gear for your application. If you have questions regarding your gear selection, please contact the Ford Racing Techline at (800) FORD788. Failure to use the correct gear will lead to premature gear failure. Premature gear failure may also be attributed to improper meshing of the gear teeth between the camshaft and distributor. For that reason, we recommend that you install a new distributor gear when installing a new camshaft. ALTERNATIVE METHOD OF VERIFYING CORRECT DISTRIBUTOR GEAR INSTALLATION: After STEP 7, install distributor assembly in the block you are using. Timing chain set and camshaft must be removed. With the aluminum distributor housing fully seated against the block, verify that the distributor gear can be lifted off the support in the block at least .005". Next pull the distributor gear down against the support in the block and hold it there. Pull up on the aluminum distributor housing and verify that you can lift it up at least .005" while holding the gear against the support in the block. This procedure will confirm that the gear is not being forced down against the support and not being held up off the support in the block. INSTALLATION INSTRUCTIONS: Remove roll pin from distributor gear and shaft. Save pin for re-assembly. STEP 2: Verify that the shaft endplay is .024" to .035". Modify collar if necessary. Some aftermarket distributors may be constructed in a manner that does not allow you to achieve .024" to .035" of endplay. See “Alternative method of verifying correct distributor gear installation” if your distributor does not have .024" to .035" endplay. STEP 3: Press original distributor gear off shaft. STEP 4: Mark location of original roll pinhole on the shaft by drawing a vertical line along the shaft that intersects the hole. Measure from the centerline of the roll pinhole to a fixed point above it. Note that dimension. STEP 5: Press new distributor gear onto shaft. NOTE: Replacement distributor gear does not have roll pinhole. STEP 6: Pull distributor shaft out of distributor housing to eliminate endplay (see Figure 1). STEP 7: Check location of distributor gear on distributor shaft (see Figure 1). If it is not in the correct location, use a press to move the gear to the correct location. STEP 8: Using the vertical line on the distributor shaft and the noted dimension (see STEP 4), roughly plot where the original roll pinhole is located. Drill a new .125" hole 90˚ from the original hole, above or below it, through the gear and the shaft. NOTE: It is important that the dimensions called out in Figure 1 are maintained while drilling. STEP 9: Insert roll pin and check dimensions (see Figure 1). Continue with STEP 8 COMMON DISTRIBUTOR PROBLEMS: Distributors with very little or no shaft endplay. This has been found with new and remanufactured distributors. Improper endplay may force the gear against the support in the block or hold it up off the support, causing damage. ENGINE COMPONENTS STEP 1: Distributors that have a different material gear than advertised. It is important to run the correct distributor gear for the camshaft that you are using. Consult the manufacturer of the camshaft you are using for gear recommendation. Some heavy-duty oil pump drive shafts may not allow an EFI distributor to slide down far enough over the oil pump drive shaft. EFI distributors have a longer shaft below the gear. Running an HV oil pump with production bearing clearances can cause abnormally high oil pressure and possible premature distributor gear wear. Gears on camshafts with a very poor finish. This could cause premature distributor gear wear. New and remanufactured distributors with the gear installed at the wrong height. WARNING: If the distributor gear is installed incorrectly, it may be forced down against the support in the block or may be held up away from the support in the block. Both conditions will cause damage to the block and or the block and gears. When the gear is properly installed, the cut on the gears and the direction of rotation will pull the distributor gear down against the support (distributor gear thrust face) in the block. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 147 AXLE COMPONENTS CARRIERS Ford Racing offers a variety of nodular iron, steel and aluminum carriers for the popular 9" axle. M-4141-D shown M-4141-B shown PART NUMBER MATERIAL CARRIER M-4141-B Nodular M-4141-D Aluminum M-4141-E Nodular M-4141-H Nodular Iron Nodular Iron M-4141-J BRG. CAP 4130 Steel Aluminum 4130 Steel 4130 Steel 4130 Steel APPROX. WEIGHT BRG. CAP I.D. ADJUSTER NUT DIFF. BRG. DIFF. RACE AXLE SHAFT COMPATIBILITY 26# 2.892" Steel 3.0625" Stamped Steel Machined Steel Machined Steel Machined Steel Machined Steel LM-102949 LM-102910 28/31/33 Spline Heavy Duty LM-603049 LM-603011 28/31/33 Spline Heavy Duty LM-603049 LM-603011 28/31/33 Spline Heavy Duty LM-104949 LM-104911 31/35/40 Spline Heavy Duty Lightweight 31 Spline Heavy Duty 14# 26# 26# 3.0625" Steel 3.250" 26# 2.9528" 2MM9109W1 — Ball Bearings NOTES 9" STEEL DIFFERENTIAL CARRIER M-4141-HS • Developed using Finite Element Analysis (FEA) to withstand the demands of NASCAR racing. Finite Element Analysis is a method for predicting the response of a geometric structure due to the environment it is being designed to function in. The process starts by creating a geometric model. The model is then subdivided, or meshed into many small geometric pieces, or elements of basic geometric shape. These basic shapes can easily give results for stress and strain where the larger geometric structure cannot • Steel casting has nearly double the tensile and yield strength and enlongation vs. cast iron • Case investment cast from 8620 steel • Bearing caps machined from 4130 steel • ARP® bolts • 3.250" differential bearing diameter • Approximate weight: 21 lbs. 148 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. SMALL PARTS KIT M-4663-A100 Kit includes: • Pinion nut • O-ring • Collapsible spacer • Gear marking compound • Brush • Shims to set pinion gear depth BRAKE BACKING PLATE T-BOLT AND NUT KIT M-4002-B • Use to attach brake backing plates to 9" axle housings • 3/8-24 x 1.3" T-bolts and locking nuts • Sold in axle sets of 8 bolts and nuts Both pinion bearing retainers are a direct fit and functional replacement for the C3AZ4614-B unit, which is no longer serviced by Ford Customer Service Division. Each comes complete with large rear cup (TBAA-4616-A) or (HM89410) and small front cup (B7A-4614-A) or (M88010). NOTE: Use large rear bearing TBAA-4621-A (HM-89443) and small front bearing B7A-4621-A (M-88048) with these retainers. Kit includes 2 locks and 2 bolts to secure differential bearing adjusting nuts on 9" nodular carriers produced after November 1989. BOLT – RING GEAR TO DIFFERENTIAL CASE M-4216-A200 Sold in pkg. of 100 M-4216-A210 Sold in pkg. of 10 The most popular 9" ring gear bolt, for use on open differentials, Detroit Lockers and spools. NOTE: Will NOT fit Traction-Lok differentials. Same as flywheel bolts, see page 172. 9" TRACTION-LOK REBUILD KIT M-4700-A • Kit includes: – 4 plates with friction material on both sides – 1 plate with friction material on 1 side – 4 steel plates • This kit will renew the torque bias characteristics of all 9" Ford Traction-Lok differentials UNIVERSAL PINION NUT M-4213-A Sold in pkg. of 100 • Universal-design 3/4-20 hex flange pinion lock nut • Fits 6.75", 7.5", 8.8" and 9" axle assemblies NASCAR BEARING SUPPORT M-4614-BR “BENDA” PINION SEAL (9" AXLE) M-4676-A111 Race prepared “Daytona” pinion bearing retainer. Deburred and prepped for build-up of your 9" carrier assembly. This premium Viton® oil seal was developed for high-speed, high-temperature applications by Dave Benda, Materials Control Supervisor, Ford Sterling Plant. Viton® is a registered trademark of Dupont Performance Elastomers. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com CHASSIS COMPONENTS “DAYTONA” PINION BEARING RETAINER M-4614-A High strength aluminum (206T6) M-4614-B Nodular Iron DIFFERENTIAL BEARING ADJUSTER LOCK AND BOLT KIT M-4144-B 149 AXLE COMPONENTS 8.8" RING & PINION INSTALLATION KIT M-4210-A 8.8" RING & PINION INSTALLATION KIT M-4210-B 8.8" RING & PINION INSTALLATION KIT M-4210-C • Kit includes: pinion and carrier shims, crush sleeve, pinion seal, pinion nut, ring gear bolts and cover gasket • Use for changing ring and pinion gear or differential • Fits IRS • Includes everything that M-4210-A has and pinion gear and carrier bearings • Use for changing ring and pinion gear or differential • Fits IRS • Includes everything that M-4210-B has and axle shaft bearings and axle shaft seals • Use for changing ring and pinion gear or differential • Fits 1986-04 Mustang for non-IRS axles 8.8" AXLE BEARING AND SEAL KIT M-1225-B 8.8" IRS BEARING AND SEAL KIT M-4413-A SPECIAL U-JOINT KIT M-4635-A • 8.8" axle shaft bearing and seal kit for non-IRS axles • Kit contains 2 outer axle shaft bearings and seals • 2.256" O.D. bearing • Fits 1986-04 Mustang • For use in rebuild 8.8" IRS differentials • Kit includes 2 stub shaft pilot bearings and 2 stub shaft pilot bearing housing seals • Kit consists of a hybrid 1310/1330 series cross, plus (4) 1.0625" OD and (2) 1.125" OD caps and locking clips • Allows small and large Ford drivetrain components to be interchanged 8.8" TRACTION-LOK REBUILD KIT M-4700-B 8.8" TRACTION-LOK REBUILD KIT WITH CARBON DISCS M-4700-C • Kit includes clutch pack, shims, friction modifier and instruction sheet • Fits all 8.8" Traction-Lok differentials • Kit includes carbon fiber clutch pack, shims, S-spring and instruction sheet • Fits all 8.8" Traction-Lok differentials • Carbon fiber discs designed for higher torque usage • Used in 2003-08 SVT Mustangs 150 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 8.8" TRACTION-LOK LIMITED SLIP DIFFERENTIALS M-4204-F288 28 Spline M-4204-F318 31 Spline • 8.8" differential • Features plate-type clutches • Will accept anti-lock exciter ring • Requires 4 ounces of CM-19546-A1 friction modifier with initial fill 7.5" TRACTION-LOK LIMITED SLIP DIFFERENTIAL M-4204-C75 • 7.5" differential • Fits 28 spline axles • Features plate-type clutches • Will accept anti-lock exciter ring • Requires 4 ounces of CM-19546-A1 friction modifier with initial fill 8.8" TRACTION-LOK LIMITED SLIP DIFFERENTIAL M-4204-F318C • 8.8" differential • Fits 31 spline axles • Fits solid or independent rear suspension • Carbon fiber clutch plates for increased durability • Will accept anti-lock exciter ring • Requires 4 ounces of CM-19546-A1 friction modifier with initial fill • Original equipment in 2003-04 Mustang Cobra 8.8" DIFFERENTIAL M-4204-F3180 • • • • 8.8" differential Fits 31 spline axles Open type differential Will accept anti-lock exciter ring 9" TRAC-LOK LIMITED SLIP DIFFERENTIAL M-4204-F31A • • • • • • 9" differential 28 spline 4-spring aggressive torque bias Street/strip application 1536 steel billet case caps Cast high-strength nodular iron case • OEM profile gears made of high-manganese, high-chromium alloy steel • Rebuildable • • • • • • 9.75" “TRUE TRAC” LIMITED SLIP DIFFERENTIAL M-4204-TT31 STERLING AXLE “TRUE TRAC” LIMITED SLIP DIFFERENTIAL M-4204-TT312 • Torque-sensing differential applies torque to wheel with best traction • Refined enough for street use, stout enough for rigorous off-road duty • 34 spline count fits all 9.75" axles to 2006 • Torque-sensing differential applies torque to wheel with best traction • Refined enough for street use, stout enough for rigorous off-road duty • 35 spline fits all Sterling axle 10.25" and 10.5" gears 9" differential 31 spline 4-spring aggressive torque bias Street/strip application 1536 steel billet case caps Cast high-strength nodular iron case • OEM profile gears made of high-manganese, high-chromium alloy steel • Rebuildable • 8.8" differential • Torsen T-2 type differential • Features full-time torque-sensing, torque-biasing • M-4204-T28 fits 1999 Cobra/Thunderbird/ Mark VII with IRS (2000-04 Cobra has 31 spline) FRICTION MODIFIER FOR CLUTCH-TYPE LIMITEDSLIP DIFFERENTIALS M-19546-A12 Case of 12 (Single bottles CM-19546-A1 sold in cases of 12 only) Specially formulated additive to provide smooth operation of clutch-type limited-slip differentials. Did you know… The 2005-08 Mustang GT axles are 31 spline. AXLE GIRDLE M-4033-G1 8.8" Ford • Lightweight 356T6 aluminum casting replaces rear cover on 8.8" • Load bolts provide additional support for differential bearing caps • Increase ring and pinion gear life NOTES: Check exterior clearance to chassis/suspension. Will not fit 2005 and up Mustang. 8.8" AUBURN HD LIMITED 8.8" AUBURN PRO LIMITED SLIP DIFFERENTIAL SLIP DIFFERENTIAL M-4204-A28 28 spline M-4204-P31 AXLE GIRDLE 2005-08 MUSTANG M-4033-G2 • 8.8" differential • Features cone-type clutches • Will accept anti-lock exciter ring • Requires 4 ounces of CM-19546-A1 friction modifier with initial fill • Recommended for street use only • Low Profile design to fit 2005-08 Mustang GT and 2007-08 SVT Mustang • Lightweight 356T6 aluminum casting replaces rear cover on 8.8" • Load bolts provide additional support for differential bearing caps • Increase ring and pinion gear life NOTE: Check exterior clearance to chassis/ suspension. • 8.8" differential • Fits 31 spline axles • Features cone-type clutches with approximately 50% more torque bias than standard Auburn differentials • Will accept anti-lock exciter ring • Requires 4 ounces of CM-19546-A1 friction modifier with initial fill • Recommended for street use only *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com CHASSIS COMPONENTS 9" TRAC-LOK LIMITED SLIP DIFFERENTIAL M-4204-F28A 8.8" T-2 TORSEN DIFFERENTIALS M-4204-T28 28 spline M-4204-T31 31 spline 151 AXLE COMPONENTS 28-SPLINE 8.8" TRACTION-LOK REAR AXLE ASSEMBLIES (LESS BRAKES AND SHAFTS) FEATURES… • Approximately 35% stronger than the production 7.5" axle • Units are fully assembled with housing (including all applicable brackets), gearset and 28-spline traction-lok differential • Bolts into the Fox vehicles listed with each part number that were originally equipped with 7.5" axle • Axle assembly uses vehicle’s 28-spline axle shafts and rear drum brakes M-4006-B373 shown PART NUMBER RATIO VEHICLE APPLICATION M-4006-B355* 3.55:1 1979-98 Mustang ➀ 1981-82 Granada/Monarch 1979-86 Capri M-4006-B373* 3.73:1 1978-82 Fairmont/Zephyr 1983-85 LTD/Marquis NOTE: ➀ 1986-95 Mustang 5.0L vehicles are factory-equipped with 28-spline 8.8" axle assembly. 8.8" MUSTANG AXLE KIT M-4006-S197* • • • • Factory 8.8" axle housing kit for 2005-2007 Mustang Perfect for building a custom axle! Allows you to customize your gearset and differential Includes: – Axle housing – Housing vent – Left and right 31-spline production axle shafts – 2005-06 Mustang pinion flange – 2003-04 Cobra 1350 pinion flange – Cover bolts – Pinion washer – C-locks – M-4210-B ring and pinion installation kit – M-1126-C shim kit 2005-08 MUSTANG GT AXLE KIT M-4001-A355* • • • • 2005-08 Mustang GT 8.8 axle assembly 31 spline axles and Traction-Lok differential 3.55 gear ratio Includes axle shafts C-CLIP ELIMINATOR (8.8" AXLES) M-4220-A • Retains axle externally • Eliminates need for C-Clips at differential • Mandatory for spools and wherever required by sanctioning bodies • Fits axle shafts with 1.400" dia. bearing journal • Not recommended for road racing applications or rear disc brakes 152 Techline (800) FORD788 8.8" AXLE INSTALLATION KIT M-4050-B 2003-04 COBRA PINION FLANGE M-4851-B This kit consists of 2 bushings, 2 C-locks and 1 4-ounce bottle of friction modifier. These parts are included with every Ford Racing 8.8" axle assembly. Now available separately in this kit in response to requests from racers and fabricators. • Original equipment on 2003-04 Mustang Cobra • Designed for use with 1350 U-joint flange • 4.25" bolt circle • Fits all 8.8" rear drive pinions *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 10.25"/8.8" RING GEAR AND PINION SETS PART NUMBER RATIO AXLE MUSTANG/RANGER/F-150 M-4209-F308 shown M-4209-F308* M-4209-F327* M-4209-G355A* M-4209-F373N* M-4209-G410A* M-4209-G410M* M-4209-G430M* M-4209-G456* 3.08:1 8.8" 3.27:1 8.8" 3.55:1 8.8" 3.73:1 ➁ 8.8" 4.10:1 8.8" 4.10:1 8.8" 4.30:1 8.8" 4.56:1 8.8" 5.4L F-150, EXPEDITION, NAVIGATOR, F-250/350 ➀ M-4209-K410M* 4.10:1 10.25" (rear) M-4209-K456M* 4.56:1 10.25" (rear) NOTES: ➀ These ring and pinions have been developed to increase towing capability of 5.4L Expeditions. ➁ Replaces our popular M-4209-F373. New manufacturing technology utilizing a Face Hob Process which features a single-pass pinion tooth machining operation compared to a conventional three-pass process for machining. CNC cut and lapped gear teeth. Higher strength and better quality gears are produced with the Face Hob Process. NOTE: These new gears look a little different, the gear teeth are cut on a different angle and the ring gear has a bevel on the back of the gear. SPEEDOMETER GEAR USAGE CHART — 7.5" AND 8.8" AXLE SPEEDOMETER DRIVEN GEAR TEETH DRIVE GEAR TEETH AXLE RATIO 6T 7T ➀ 8T ➁ 3.08 3.27 3.45/3.55 3.73 4.10 4.30 – 16 17 18 20 21 18 19 20 21 – – T-5 MANUAL TRANS. DRIVE GEARS (17285) NUMBER SERVICE OF PART TEETH COLOR NUMBER 6 7 8 Black Yellow Green E3ZZ-B E3ZZ-A F0ZZ-A T-45 MANUAL TRANS. DRIVE GEARS (17285) 7 8 F6ZZ-AA F6ZZ-BA NOTES: ➀ Used in most vehicles with V-8 and T-5 transmissions from 1983-89 and 1996-98 Cobra with T-45 transmissions. ➁ Used on 1990-95 Mustang V-8 with T-5 transmissions and 1996-98 Mustang GT with T-45 transmissions. ➂ Discontinued. 20 21 – – – – MANUAL TRANS. DRIVEN GEARS (17271) NUMBER SERVICE OF PART TEETH COLOR NUMBER 16 17 18 19 20 21 Wine White Yellow Pink Black Red SPECIAL APPLICATIONS DRIVEN GEAR CALCULATION EXAMPLE STEP 1 STEP 2 If your axle/tire combination is not in the above charts, you can calculate the number of teeth required on the driven gear by using this formula: • • • • T-5 Trans. Drive Gear Teeth = 7 Axle Ratio = 3.73 Tire Rev. Per Mile = 815 (225/60 VR15) C0DZ-A C3DZ-C C0DD-B C0DZ-B C1DZ-A C4OZ-A AUTO TRANS. DRIVEN GEARS (17271) NUMBER SERVICE OF PART TEETH COLOR NUMBER 16 17 18 19 20 21 Blue Green Gray Tan Orange Purple CHASSIS COMPONENTS The chart specifies the driven gear recommended to obtain approximately correct MPH readings when the listed Ford Racing ring and pinion gear sets are used in conjunction with the indicated speedometer drive gear and Mustang original equipment. 15"/16"/17" tires (800-815 revolutions/ mile). A dash in the chart indicates that particular combination cannot be obtained. If you are using oversize/undersize tires, obtain the revolutions/mile information from the tire manufacturer and plug it into the formula below. The part numbers of the various speedometer drive and driven gears are shown in the charts. The gears can be obtained from any Ford and Lincoln-Mercury dealer. They are not available from Ford Racing. The drive gears on T-5/T-45/SROD/ Tremec manual transmissions can be changed. The drive gear on Ford rear-wheel automatic transmissions is machined into the output shaft. Changing the drive gear is impractical since it requires a new output shaft and transmission teardown. Most have 7 or 8 teeth. D0AZ-A ➂ C7SZ-A C7SZ-B ➂ C7VY-A C8SZ-B D0OZ-B STEP 3 You would select driven gear with closest whole number of teeth, which would be the 21-tooth C40Z-17271-A part. Driven Gear Teeth = Drive Gear Teeth x Axle Ratio x Tire Rev. Per Mile = 7 x 3.73 x 815 = 21.3 (driven gear teeth) 1000 1000 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 153 CHASSIS COMPONENTS 2005-08 MUSTANG GT AND 2007-08 SVT MUSTANG TWOPIECE DRIVESHAFT LOOP KIT M-5478-S197* • Bolts to floor pan 2005-08 Mustang GT and 2007-08 SVT Mustang • Must drill holes for installation • Zinc plated • Includes hardware • Includes front and rear loops for production two-piece driveshaft 5-LUG REAR BRAKE DRUM/AXLE SHAFT KITS 1979-93 MUSTANG/CAPRI M-1126-A* 28-spline Differential This kit includes 1 pair of 9" x 1-3/4" brake drums with 5 mounting holes on a 4.5" diameter circle—and 1 pair of 28-spline axle shafts with mating 5-lug bolt pattern. Permits owners of 1979-93 Mustang/Capri vehicles with 9" rear brakes and 8.8" rear axle with 28-spline differential to fit 5-hole, 4.5" diameter bolt circle wheels to them. MUSTANG DRIVESHAFT SAFETY LOOP M-5478-C2 • • • • • Bolts to the floor pan of all 1979-04 Mustangs Must drill holes for installation Zinc plated Includes hardware Designed to fit with 3.5" aluminum driveshafts HEAVY-DUTY 8.8" 4-LUG 31-SPLINE MUSTANG AXLE SHAFT M-4235-B* 1979-93 Mustang • 1979-93 Mustang with 8.8" axle • Heavy-duty 31-spline axle shaft (29.16" long) for applications using 31-spline differentials • 4-lug, 4.25" bolt circle HD ALUMINUM DRIVESHAFT ASSEMBLY M-4602-G Fits 1979-95 Mustang/Capri 5.0L vehicles with T-5/SROD/C-4/A0D, 1979-93 with Tremec transmissions and 7.5" or 8.8" axles. 28 spline yoke M-4602-J Fits 1996-04 Mustang and 1996-98 Cobra 4.6L with manual transmission. 31 spline yoke • High strength, 3.5" diameter 0.114" wall thickness 6061-RT62 aluminum seamless drawn tube • 1330 U-joints 45.5" long (CL to CL of U-joints) • Will not fit 1999-04 Cobra HEAVY-DUTY 8.8" 5-LUG 31-SPLINE MUSTANG AXLE SETS (SOLD IN PAIRS) M-4235-E* 1999-04 Mustang M-4235-D* 1994-98 Mustang M-4235-F* 1979-93 Mustang • Heavy-duty SAE 1550 steel • Studs and O-rings included • 31-spline • 5-lug, 4.5" bolt circle KIT CAR IRS HUB M-1109-A KIT CAR 8.8" IRS HOUSING KIT M-4010-A88 • 5 x 4.5" bolt circle, 2.775" wheel pilot hub for popular Mustang size wheels • Should be used with IRS knuckle M-5970-A • Original equipment on 1999-04 Mustang Cobra • Aluminum IRS differential housing, rear cover, rear cover bolts, oil slinger and vent tube • Does not include gear set, gear installation kit or IRS compatible differential • Original equipment on 1989-97 T-Bird, 1993-98 Mark VIII, 1999-04 Mustang Cobra with 8.8" KIT CAR IRS BEARING M-1215-A KIT CAR IRS KNUCKLE SET M-5970-A • For use with kit car IRS hub M-1109-A • Original equipment on 1993-98 Mark VIII, 1989-97 Thunderbird, and 1999-04 Cobra • Knuckles for use in kit car IRS systems • Hub not included! Use with M-1109-A. Sold separately • Includes M-1215-A • Original equipment on 1989-97 Thunderbird and 1993-98 Mark VIII 154 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. MUSTANG GT 14" BRAKE UPGRADE KIT M-2300-S* • Fits 2005-08 Mustang GT • Kit will upgrade the front brakes to 2007-08 SVT Mustang 14" rotors and 4-piston calipers • Includes 2007 SVT Mustang rear pads for use in stock Mustang GT rear calipers • Includes Goodridge® DOT four-piece hose kit and attaching parts • Requires 18" M-1007-S1895, M-1007-S1895B wheel or equivalent for caliper clearance 5-LUG FRONT/REAR SUPER HEAVY-DUTY “COBRA” DISC BRAKE CONVERSION KIT 1987-93 MUSTANG M-2300-K* This kit permits owners of 1987-93 Mustang GTs and LXs with V-8 to upgrade their vehicle braking system to 1993 Cobra “R”/1994 Cobra specs. The kit features massive 13.0" front and 11.65" rear rotors, plus spindles, axle shafts, hubs, calipers, mounting brackets, Cobra brake booster and master cylinder, adjustable proportioning valve, hoses, tubes, attaching hardware, instructions and more. Installation is a virtual bolt-on, requiring only one flared connection. Requires use of 17" x 8" wheels (not included in kit) with 5-hole, 4.5" diameter mounting pattern and 5.75" backspacing. Rear inner fender lips should be “rolled” for tire clearance. Some vehicles may also require front fender wheel well modifications, depending on tire size and ride height. CHASSIS COMPONENTS *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 155 CHASSIS COMPONENTS 5-LUG LOW-COST REAR DISC BRAKE KIT LATE FORD 9" AND 8.8" TRUCK AXLE HOUSING NOTE: Does not fit Mustang 8.8" axle. M-2300-G* This rear disc brake kit may be low buck, but it really works! Kit includes 11" rotors, calipers, mounting brackets and attaching hardware. The rotors have the popular 5-hole, 4.5" diameter passenger car bolt pattern. Caliper mounting brackets fit the popular 8.8" Truck/9" Late Ford axle housings with 2" x 3.56" pattern and big 3.15" diameter bearing. This kit is designed for vehicle installations with a 2.5" brake gap (housing flange-to-axle shaft flange). NOTE: Hoses, tubes, parking brake cables and wheels are NOT included in this kit. Additional parts and machining may be required. For more information, call the Techline at (800) FORD788. REAR BRAKE BRACKET KIT M-2300-M* • Used to install Mustang Cobra, Mach 1, or Special Edition rear calipers on a 1994-04 Mustang GT • Kit includes production 11.65" rotors, caliper mounting brackets, moan braces, dust shields and dust shield bolts COBRA “R” FRONT BRAKE KIT M-2300-X* • Original equipment on 2000 Cobra “R” • Kit includes Brembo® 4-piston calipers, brake lines, hardware and “upgraded” slotted rotors • This kit can be used to upgrade the front brakes on 1994-04 GT and 1994-04 Cobra • May require larger wheels like M-1007-R189/R189C/F500/F500C NOTE: 1994-95 GT requires 1994 Cobra master cylinder COBRA BRAKE KIT M-2300-Q Fits 1994-95 Mustang GT ➀ M-2300-R Fits 1996-04 Mustang GT • • • • These kits will upgrade the front brakes to 1994-04 Cobra 13" rotors and calipers Use with stock rear disk brakes Includes hoses and attaching parts Requires 17" wheels such as M-1007-C58, M-1007-C178, M-1007-R58 or equivalent NOTE: ➀ Includes master cylinder. M-2300-Q shown SEVERE DUTY BRAKE KIT M-2400-C Designed as an upgrade for M-2300-K brake kits. This kit includes 2 improved strength brake hoses and 2 Cobra 13" brake rotors. Can also be used to upgrade the braking performance of 1994-98 Mustang Cobras. Highly recommended for the above vehicles used in open track events. 156 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. SPECIAL EDITION MUSTANG FRONT CALIPERS M-2320-F • Same calipers as used on the 2001 Special Edition Mustang Bullitt. Similar to 2001 Mustang Cobra except painted red with running horse in place of Cobra logo • Fits 1994-04 Mustang with M-2300-Q/R upgrade kit and 1987-93 Mustangs with M-2300-K brake kit • Kit includes left and right front calipers and brake pads 10TH ANNIVERSARY COBRA CALIPER SET M-2320-AF • Replacement front calipers with brake pads • Fits 1994-04 Mustang Cobra, Special Edition, and Mach 1 Mustangs • Can be used on M-2300-K SHD brake kit with the use of M-2321-A hardware kit SPECIAL EDITION MUSTANG REAR CALIPERS M-2320-R 10TH ANNIVERSARY COBRA CALIPER KIT M-2320-A • Same calipers as used on the 2001 Special Edition Mustang Bullitt. Similar to 2001 Mustang Cobra except calipers are painted red • Fits 1994-04 Mustang Cobra and 1987-93 Mustangs with M-2300-K brake kit • Kit includes left and right rear calipers and Special Edition Mustang brake pads • Use M-2300-M bracket kit to install caliper on 1994-04 Mustang GT • Replacement front and rear calipers with brake pads • Fits 1994-04 Mustang Cobra, Special Edition, and Mach 1 Mustangs • Original equipment on 10th Anniversary Mustang Cobra • Can be used on M-2300-K SHD Brake kit with the use of M-2321-A hardware kit COBRA CALIPER SET M-2320-C • Replacement front calipers and brake pads for 1994-04 Mustang Cobra with 13" rotors • Same calipers and pads used in the M-2300-K SHD brake kit for 1987-93 Mustangs COBRA REAR CALIPER M-2320-CR • Replacement rear calipers and brake pads for 1994-04 Mustang Cobra with 11.65" rotors • Same calipers and pads used in the M-2300-K SHD brake kit for 1987-93 Mustang GT CALIPER HARDWARE KIT M-2321-A The following components from the M-2300-C, -F, -K kits are not serviced through Ford and LincolnMercury dealer parts department. These parts are only available from Ford Racing to service M-2300-C, -F, -K kits when replacement parts are required. • Includes 2 coarse-thread banjo bolts and 4 washers • Used to install front calipers M-2320-A and M-2320-AF PART NUMBER DESCRIPTION SERVICE KIT M-2450-A* M-2809-A* M-2810-A* Plug, Fixed Proportioning Valve Parking Brake Cable Parking Brake Cable (Front) C/F/K C/F/K F/K *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com CHASSIS COMPONENTS UNIQUE SERVICE PARTS FOR M-2300-C, M-2300-F AND M-2300-K 157 CHASSIS COMPONENTS DRUM BRAKE BACKING PLATE KIT M-2209-B* 11" X 2.25" BRAKE DRUM M-1126-B* • Fits Brake Drum M-1126-B • 11" x 2.25" brakes for late model 9" axle housing • 3.150" center pilot hole • .381 attaching bolt holes • 3.56" x 2" attaching bolt pattern • Kit includes 2 new assembled backing plates with brake shoes, wheel cylinder, self-adjuster, parking brake and springs • Sold in pairs • • • • Brake drum for backing plate kit M-2209-B 5 on 4.5" bolt circle Axle center pilot hole 2.780" Sold individually BRAKE PROPORTIONING VALVE M-2328-C Compact, lightweight (.5 lb.) aluminum brake proportioning valve. “Kneepoint” is adjustable from 100 to 1000 psi. Inlet and outlet ports have 1/8"27 NPT threads for maximum installation flexibility. FORD RACING PERFORMANCE PARTS USED: Jason Schembri’s 1982 Mustang 1/4 mile time: 11.60 @ 118 mph 158 Techline (800) FORD788 FRPP Aluminum Drive Shaft FRPP 4.30 Gears FRPP Front/Rear Lowering Springs FRPP Front Lower Control Arm FRPP Pulley Kit FRPP Roller Rocker Arms FRPP Chrome Aluminum Valve Covers *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. HD REAR UPPER CONTROL ARM KIT M-5500-A Kit contains 2 upper control arms with bushings that are approximately twice as stiff as current production bushings. Significantly improves traction and handling when fitted to 1979-98 Mustang and 1993-98 Cobra V-8 models. FRONT LOWER CONTROL ARM KIT M-3075-D This kit enables owners of 1994-04 Mustangs to upgrade to 2003 Cobra Mustang control arms. The kit features 2 front lower control arm assemblies with 50% stiffer front bushings and low-friction ball joints. This control arm has a redesigned stamping to improve the turning circle approximately 10% on 1994-98 Mustangs. 2007-08 SVT MUSTANG FRONT LOWER CONTROL ARM KIT M-3075-E • Fits 2005-08 Mustangs • Original equipment on 2007-08 SVT Mustang • Increased strength ball joints • Kit contains 1 RH and 1 LH lower control arm assembly NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 2007-08 SVT MUSTANG REAR LOWER CONTROL ARMS M-5538-A • Fits 2005-08 Mustang • Original equipment on 2007-08 SVT Mustang • Increased bushing durometer and stiffness for higher horsepower applications NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. MUSTANG REAR LOWER CONTROL ARMS M-5649-H Fits 1979-98 M-5649-H1 Fits 1999-04 This kit enables owners of 1979-93 Mustang/Capri vehicles to upgrade them to 1996 levels with low-friction ball joints and improved inner bushings. Dramatically improves impact harshness qualities of vehicle and is recommended when heavy-duty suspension components are added. NOTE: The ball joints in the kit have been upgraded. They have an improved nylon bearing to further reduce impact harshness. (Since no measurable wear could be detected after 250,000 miles of fleet testing, the wear detectors were eliminated.) Kit includes LH and RH lower control arm assemblies. • This lower control arm relocates control arm mounting points to alter rear suspension geometry • Traction under acceleration and braking is dramatically improved • Dual control arm mounting points allow anti-squat and anti-dive adjustment for differing traction conditions • Both ends of control arms are equipped with fluted polyurethane bushing *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CHASSIS COMPONENTS FRONT LOWER CONTROL ARM KIT M-3075-A www.fordracingparts.com 159 CHASSIS COMPONENTS LIGHTNING LOWERING KIT M-3000-L This kit lowers all 1999-04 F-150 Lightning/F-150 Harley-Davidson models 30 mm (1.181") in all four corners. A simple front coil/jounce bumper replacement and rear shackle replacement are the only items necessary to enhance positive control. Both vehicles retain very good ride/launch characteristics. 2004-06 F-150 REAR LOWERING KIT M-3000-G • Lowers rear of vehicle • 2" drop • Contains all installation hardware LOWERING KIT, 1997-03 F-150, 2WD M-3000-T1 This kit lowers 1997-03 F-150 standard cab, SuperCab and SuperCrew with V-6 or V-8, approx. 2" front and 4" rear. Includes new front coil springs, rear shackles and hangers and 4 specially tuned high-pressure gas shocks. Fits vehicles with V-6 or V-8 engines in standard cab (long and short bed) and SuperCab (short bed). Improves appearance and handling with very acceptable ride characteristics. NOTE: Not recommended for 1999-03 SVT F-150 Lightning. When used on 2001 SuperCab with 6' box and 5" dia. driveshaft, the driveshaft may hit the crossmember on hard bumps. 2WD only. 2004-07 2WD F-150 LOWERING KIT M-3000-T3 • Lowers truck 2" in the front, 5" in the back • Includes front drop coil springs, rear flip kit, rear shocks, bump stops and hardware • Fits all 2WD models • Lowers vehicle roll center for better handling • Does not fit 2004 F-150 Heritage 160 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2006-08 FUSION SPRINGS M-5300-M • Engineered specifically for improved handling on the 2006-08 Fusion and Milan • Front wheel drive only • Lowers car approximately 1.5" • Gives a more aggressive looking stance as well as increased handling dynamics • May cause firmer ride than stock springs NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. STRUT TOWER BRACES M-20201-A50 ➀ 1979-93 Mustang These high-quality steel strut tower braces stiffen 1979-93 Fox Mustangs and are designed to clear all production and many aftermarket components and accessories. These braces come complete with all necessary fasteners and instructions. Braces are “E” coated and painted for corrosion resistance. These kits are extremely competitively priced. M-20201-M46 Fits 1999-04 Mustang GT 4.6L SOHC Easily bolts into original holes. Designed to clear superchargers and Ford Racing intake manifold M-9424-D46/E46. NOTE: ➀ Will not fit 1979-85 Mustang with dual snorkel air cleaner. Must use Ford Racing M-9600-A302 air cleaner, or equivalent. DRAG RACE SUSPENSION M-3000-D This kit consists of specific rate front and rear coil springs to improve the launch characteristics of your 1979-04 Mustang (except 1999-04 Cobra). An airbag is also included for installation inside the right rear coil spring. Fine tuning of the air pressure in the airbag will help neutralize the axle torque reaction. Recommended for serious Drag Racers. Spring rates F-300/465, LH 180, RR 180/350. 1979-04 PRODUCTION SPRING RATES (LBS. /IN.) YEAR MUSTANG V-8 COBRA COBRA “R” 1979 *Convertible F500 R470 2005-08 MUSTANG STRUT TOWER BRACE M-20201-S197 • Fits 2005-08 Mustang GT without plastic engine cover • Parallel beam design for added rigidity • Black powder coated • Stainless steel Ford Racing emblem • Does not fit V-6, supercharged GT or 2007-08 GT with intake shroud NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. 1979-04 MUSTANG FRONT/REAR SPRING KITS These spring kits have been designed to lower your Mustang and improve its handling. There will be some deterioration in ride quality. NOTE: The height on some cars will vary. PART NUMBER MODEL YEAR AMOUNT LOWERED (V-8) FRONT REAR SPRING RATES (LB./IN.) FRONT REAR M-5300-B ➅ M-5300-C ➅ M-5300-F ➂➅ M-5300-G ➃➅ 1979-04 ➄ 1979-04 ➄ 1979-04 ➄ 1979-04 ➄ .875" ➀ .875" ➀ 1.2" 1.2" 425/530 650 460/570 500/570 .5" ➁ .5" ➁ 1.0" 1.2" 200/300 200/300 170/310 170/310 NOTES: ➀ 1994-04 models – 1-1/8". ➁ 1994-04 models – 3/4". ➂ Coupe only. ➃ Convertible only. ➄ Will not fit 1999-04 Cobra. ➅ Due to vehicle assembly tolerances these specifications may vary. CHASSIS COMPONENTS F395 R160 1980-81 F370 R160 1982 F395 R160 1983-84 F410 R160 19841/2-93 F425/525 R200/300 1993 F425/525 F425/525 F750/850 R200/300 R160 R240/260 1994 F400/500 F400 R165/265 R160 1995 F400/500 F400 F700/850 R165/265 R160 R200/260 1996-98 F400/500 F400 R165/265 R160 1999 F450 F500 R210 R470 2000 F450 F800 R210 R750 2001-02 F450 F500 R210 R470 2003 F450 F600* R210 R600* 2004 F450 R210 M-20201-A50 shown M-5300-F shown 1994-04 MUSTANG HANDLING KIT M-5400-A • Kit includes increased rate Mustang springs, anti-roll bars, shocks and struts tuned for use with this package • Spring rates: front 600 lb.-in. and rear 250 lb.-in. • Lowers 1994-98 vehicles 1" and 1999-04 vehicles .75" • Will not fit 1999-04 Cobra • Due to vehicle assembly tolerances, amount lowered may vary *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 161 2003-04 MUSTANG COBRA PARTS 10TH ANNIVERSARY MUSTANG COBRA WHEEL M-1007-A179* • • • • • • • Fits 1994-04 5-lug, 4.50" bolt circle 6.12" backspacing 26 mm offset 17" x 9" wide Charcoal metallic finish Includes center cap 2003-04 MUSTANG COBRA UPGRADED SUPERCHARGER KIT M-6066-CT46* 2003 SILVER MUSTANG COBRA WHEEL M-1007-S179* • • • • • • Fits 1994-04 5-lug, 4.50" bolt circle 6.12" backspacing 26 mm offset 17" x 9" wide Includes center cap ALSO AVAILABLE POLISHED AS M-6066-CT46P • DESIGNED FOR USE WITH FACTORY TWIN-BORE THROTTLE BODY! • Kit includes supercharger, supercharger inlet, manifold adapter plate and hardware kit • Does not require PCM, fuel pump or MAF meter upgrades • Simple bolt-on increase at the rear wheels of 85 horsepower and 50 lb-ft of torque • Installation of this kit will void your new vehicle engine warranty NOTE: Superchargers are built to order. Please allow 7 days for assembly. 2003-04 MUSTANG COBRA UPGRADED POLISHED SUPERCHARGER KIT M-6066-CT46P* • Same as M-6066-CT46, but polished • DESIGNED FOR USE WITH FACTORY TWIN-BORE THROTTLE BODY! • Kit includes polished supercharger and supercharger inlet, manifold adapter plate and hardware kit • Does not require PCM, fuel pump or MAF meter upgrades • Simple bolt-on increase at the rear wheels of 85 horsepower and 50 lb-ft of torque • Installation of this kit will void your new vehicle engine warranty NOTE: Superchargers are built to order. Please allow 7 days for assembly. 2003 MUSTANG COBRA SUPERCHARGER PULLEY COVER M-2301-J • Dress up your 2003-04 Mustang Cobra with this brushed stainless steel pulley cover • Features a laser-cut Cobra snake for a striking appearance! • Easy to install, direct replacement for production pulley cover 162 Techline (800) FORD788 10TH ANNIVERSARY MUSTANG COBRA SHIFT BOOT M-7277-B • Embossed leather, simulated carbon fiber shift boot • Fits 1994-04 Mustangs with manual transmission • Attaching glue not included ALUMINUM MUSTANG COBRA RADIATOR M-8005-C03** • Original equipment on the 2003 Mustang Cobra • Easy bolt-in installation • Fits 1997-03 V-8 Mustangs with manual transmission NOTE: Will fit 1996 Cobra that has factory cooling system update. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. MUSTANG COBRA “R” PARTS 2000 SILVER MUSTANG COBRA “R” WHEEL M-1007-R189* Fits 1994-04 • • • • • 5-lug, 4.50" bolt circle 6.12" backspacing 20 mm offset 18" x 9.5" wide Includes center cap 2000 CHROME MUSTANG COBRA “R” WHEEL M-1007-R189C* Fits 1994-04 • • • • • 5-lug, 4.50" bolt circle 6.12" backspacing 20 mm offset 18" x 9.5" wide Includes center cap 1995 SILVER MUSTANG COBRA “R” WHEEL M-1007-R58* Fits 1994-04 • • • • • 5-lug, 4.50" bolt circle 5.98" backspacing 24 mm offset 17" x 9" wide Includes center cap • Will clear M-2300-K disc brakes • Same wheel used on 1995 SVT Mustang Cobra “R” CHROME MUSTANG COBRA “R” WHEEL M-1007-C58* Fits 1994-04 • • • • • • 1993 - 107 units • 1995 - 250 units • 2000 - 300 units 2000 MUSTANG COBRA “R” HOOD M-16612-R00 • Similar to the original 2000 Cobra “R” hood except manufactured from steel-reinforced fiberglass • Top-quality hand-laminated fiberglass • Bolts to stock hood hinges and uses stock hood latch • Fits 1999-04 Mustang and 1999-01 Cobra • 12 lbs. lighter than production Cobra “R” model hood • Must be fitted and painted to match color of car COBRA “R” HOOD M-16612-R58 • • • • • Fits 1994-98 Mustang Fiberglass, steel reinforced Bolt to stock hinges and hood latch Top-quality, hand-laminated Must be fitted and painted to match color of car COBRA “R” FRONT BRAKE KIT M-2300-X* 2000 MUSTANG COBRA “R” SEATS M-16620-C** • Original equipment on 2000 Cobra “R” • Kit includes Brembo® 4-piston calipers, brake lines, hardware and “upgraded” slotted rotors • This kit can be used to upgrade the front brakes on 1994-04 GT and 1994-04 Cobra • May require larger wheels like M-1007-R189/R189C/F500/F500C NOTE: 1994-95 GT requires 1994 Cobra master cylinder. • Replacement for original equipment seats on 2000 Mustang Cobra “R” • Black cloth with Mustang Cobra “R” logo • Includes driver and passenger seats • Seat tracks included • Seat features manual lumbar support and manual seat cushion length adjustment *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com COBRA PARTS 5-lug, 4.50" bolt circle 5.98" backspacing 24 mm offset 17" x 9" wide Includes center cap • Will clear M-2300-K disc brakes MUSTANG COBRA “R” PRODUCTION NUMBERS 163 HEADERS SHORTY HEADERS AVAILABLE IN STAINLESS STEEL OR CERAMIC COATED STAINLESS STEEL M-9430-P50 shown M-9430-E462 shown PART NUMBER TYPE M-9430-P50* M-9430-P51* M-9430-E462* M-9430-E463* M-9430-E464* M-9430-E465* M-9430-T50* Stainless Steel Ceramic Coated Stainless Steel Ceramic Coated Stainless Steel Ceramic Coated Stainless Steel APPLICATION Tube Diameter 1986-93 Mustang 5.0L ➀➂➄➅ 1.625" 1986-93 Mustang 5.0L ➀➁➂➄➆ 1.625" 1996-04 Mustang GT 4.6L SOHC 1.625" 1996-04 Mustang GT 4.6L SOHC ➁ 1.625" 1996-02 4.6L Cobra DOHC ➇ 1.625" 1996-02 4.6L Cobra DOHC ➁➇ 1.625" 1990-95 F-Series Truck and 1.625" E-Series Van with 5.0L engine ➂ M-9430-T58* Stainless Steel 1990-96 F-Series Truck and 1.625" E-Series Van with 5.8L engine ➂ M-9430-F542* Stainless Steel 1999-03 F-150 5.4L 2V 1.625" M-9430-F542C* Ceramic Coated 1999-03 F-150 5.4L 2V ➁ 1.625" M-9430-F543* Stainless Steel 2004-05 F-150 5.4L 3V 1.625" M-9430-SD682* Stainless Steel 2004 F-250 6.8L V10 2V 1.625" M-9430-SD682C* Ceramic Coated 2004 F-250 6.8L V10 2V ➁ 1.625" M-9430-SD683* Stainless Steel 2005 F-250 6.8L V10 3V 1.625" M-9430-SD683C* Ceramic Coated 2005 F-250 6.8L V10 3V ➁ 1.625" M-9430-C54* Stainless Steel 2007-08 SVT Mustang 5.4L DOHC 1.625" M-9430-C54C* Ceramic Coated 2007-08 SVT Mustang 5.4L DOHC 1.625" M-9430-S197* Stainless Steel 2005-07 Mustang GT 4.6L 3V 1.625" M-9430-S197C* Ceramic Coated 2005-07 Mustang GT 4.6L 3V ➁ 1.625" M-9430-SVTFC* Ceramic Coated 2002-04 SVT Focus ➁ 1.500" M-9430-ZX3L* Stainless Steel 2000-04 Focus 2.0L Zetec 1.500" M-9430-ZX3LC* Ceramic Coated 2000-04 Focus 2.0L Zetec ➁ 1.500" NOTES: ➀ Also fits early Fox vehicles with modifications. ➁ Jet-Hot® Lifetime Warranty. ➂ Production and GT-40 heads. ➄ Finally a header that fits the new angled spark plug 5.0L GT-40 “P” cylinder head. Fits 1986-93 Mustangs with stock or aftermarket H-pipe. Also fits 1979-85 Mustangs and other Fox chassis with minor modification. ➅ M-9430-P50 replaces M-9430-SSC. ➆ M-9430-P51 replaces M-9430-C50. ➇ 4.6L does not fit 2004 exhaust flange. FEATURES: STAINLESS STEEL 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to properties and corrosion resistance and where some weldability is required. An example of stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust will form in most instances. This rust retards further corrosion. • 409 stainless steel tubes • Machined flange • Bolts to stock exhaust pipes • Includes gaskets, bolts and studs CERAMIC COATED STAINLESS STEEL • Identical to stainless steel header, but with Jet-Hot® ceramic finish • Stain and rust resistant • Super-premium quality • Lifetime Warranty • Finest short-tube headers you can buy JET-HOT® LIMITED WARRANTY This limited warranty becomes void if the product shows evidence of bending or mutilating of parts or burnout resulting from improper tuning. Warranty covers rust-through only and does not cover cosmetic rust or discoloration of material. This limited warranty shall be limited to the repair, adjustment or replacement of defective parts only. Does not cover any labor claims. Ask your dealer for a copy of this “Jet-Hot” limited warranty. REPLACEMENT HEADER GASKETS M-9448-A462* Fits 4.6L SOHC M-9448-A464* Fits 4.6L DOHC M-9448-B302** Fits 5.0L/302 M-9448-3V* Fits 4.6L/5.4L 3V (sold in package of 12 sets only) “STAGE 8” LOCKING HEADER BOLT SYSTEMS These kits fit most V-8 and many other engines. Includes 16 bolts and locking hardware. PART NUMBER SIZE FITS M-9432-A50 .375-16 x .75"➀ Most Headers M-9432-A51 .375-16 x 1"➀ Ford Racing Hi-Flow Shorty Headers M-9432-A54 8 mm4.6L/5.4L 1.25 x 22 mm modular V-8 engines • Header fasteners positively will not back out. Eliminates need to monitor and tighten bolts regularly • Grade 8 aircraft quality bolts, made in USA. Duplex nickel plated • Manufacturer’s Lifetime Warranty NOTE: ➀ Will not fit 4.6L/5.4L modular V-8. 164 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. EXHAUST COMPONENTS 2005-08 MUSTANG GT EXHAUST KIT M-5230-5GT* • T-304 stainless construction • Louder, “throatier” exhaust note • 49 state drive-by noise legal (not legal in CA) • Includes mufflers with Ford Racing embossed 3.5" exhaust tips SVT FOCUS MUFFLER M-5200-ZX4* • Fits 2002-04 SVT Focus ZX3 and ZX5 • Performance tuned, low back pressure muffler MUSTANG V6 DUAL EXHAUST KIT 50S M-5230-V6* • Fits 2005-08 V-6 Mustang • Aluminized body with highly polished 4.0" diameter tips • Louder, "throatier" exhaust note • Includes X-pipe • Requires minor modification of rear bumper cover • 50-States "Street Legal" E.O. #D-598 NOTE: 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to properties and corrosion resistance and where some weldability is required. An example of stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust will form in most instances. This rust retards further corrosion. FOCUS MUFFLER M-5200-ZX3* • Fits 2000-04 Focus ZX3 and ZX5 with 2.0L Zetec • Performance tuned, low back pressure muffler 2.0L SVT FOCUS CENTER EXIT EXHAUST M-5200-ZXC* • Stainless steel catback exhaust system • Center rear exit • Requires SVT rear fascia (M-17835-F) and separate center exit rear diffuser M-17835-F1 • Fits 2002-04 SVT Focus 3-door/5-door and 2000-04 Focus ZX3 and ZX5 with 2.0L Zetec engines 2.3L FOCUS CATBACK SYSTEM M-5200-D234* • Stainless steel catback exhaust system • Performance tuned, low back pressure • Fits 2003-05 Focus ZX4 with 2.3L engine 2.3L FOCUS CENTER EXIT EXHAUST M-5200-D23C* • Stainless steel catback exhaust system • Performance tuned, low back pressure • Center rear exit • Fits 2003-04 Focus ZX3 and ZX5 with 2.3L and 2.3L PZEV engines • Requires SVT rear fascia (M-17835-F) and separate center exit rear diffuser M-17835-F1 M-5200-D234 shown SVT FOCUS CENTER EXHAUST DIFFUSER INSERT M-17835-F1* • This center insert is required when installing M-5200-ZXC or M-5200-D23C center exhaust • Insert fits SVT Focus rear fascia (M-17835-F) only *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 165 EXHAUST COMPONENTS F-250/350 DIESEL EXHAUST SYSTEMS M-5230-73L* 1998-04 F-250/350 with 7.3L diesel, 2WD and 4WD 2003-05 F-250/350 with 6.0L diesel, 2WD and 4WD Made of high-quality T-304 stainless steel 4" diameter Additional lengths to fit all wheelbases included Unique tips M-5230-6L* • • • • F-150 LIGHTNING STYLE EXHAUST SYSTEM M-5230-L* • Fits 2004-2005 F-150 2WD (will not fit 2004 Heritage or Lightning models) • SVT Lightning inspired styling • Unique tips • Made of high-quality T-304 stainless steel • Additional lengths to fit all wheelbases included in the kit F-150 LIGHTNING STYLE EXHAUST SYSTEM M-5230-L3* • Fits 1998-03 F-150 and 2004 F-150 Heritage 2WD • Side exit exhaust • Unique tips • Made of high-quality T-304 stainless steel • SVT Lightning inspired styling • Additional lengths included to fit all wheelbases • Will not fit F-150 Harley-Davidson F-150 SPLIT REAR EXHAUST SYSTEM M-5230-SR* • Fits 2004-07 NEW F-150 2WD and 4WD, Super crew with short bed • Made of high-quality T-304 stainless steel • 4.6L and 5.4L compatible • Unique polished tips with Ford Racing logo • Will not fit 2004 F-150 Heritage F-150 LIGHTNING EXHAUST SYSTEM M-5230-L2* • Replacement for 1999-04 Lightning • Side exit exhaust • Made of high-quality T-304 stainless steel • Unique tips F-150 LIGHTNING STYLE EXHAUST M-5230-L06EC* • • • • Fits 2008 F-150 2WD SVT Lightning inspired styling Unique tips Made of high-quality T-304 stainless steel • Fits extended cab and crew cab F-150 HARLEY-DAVIDSON SPLIT REAR EXHAUST SYSTEM M-5230-HDSR* • Fits 2001-03 F-150 Harley-Davidson pickup • Made of high-quality T-304 stainless steel • Unique tips 166 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. EXHAUST SYSTEMS 2005-08 MUSTANG V-6 MUFFLER KIT M-5230-5V6* 2005-08 MUSTANG GT MUFFLER SET M-5230-GTA • • • • • 409 stainless body with highly polished 4.0" diameter tips • Louder, throatier exhaust note • 50-States drive-by noise legal (E.O. #D-598) NOTE: 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to mechanical properties and corrosion resistance and where some weldability is required. An example of 409 stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust will form in most instances. This rust retards further corrosion. T-304 stainless construction Louder, throatier exhaust note 50-States drive-by noise legal Includes muffler with Ford Racing embossed 3.5" exhaust tip FUSION I4 EXHAUST TIPS M-5230-FT* • • • • • Fits 2006-08 Fusion with 4 cylinder engine Chrome plated 409 stainless steel Kit includes 2 tips and 2 clamps 3" exit diameter No cutting or welding required, easy clamp-on installation Photo may vary Eric Medlen 1973-2007 Days after a testing accident in Gainesville, Florida, Eric Medlen, 33, succumbed to injuries suffered when his race car crashed into a guardwall. The talented Funny Car driver never regained consciousness. After being treated at the track, he was transported by helicopter to Shands at the University of Florida medical center, where the medical staff treated him for four days for a severe closed-head injury. Medlen had distinguished himself as one of the brightest and most popular drivers in the NHRA POWERade Drag Racing series, winning six times in his first three seasons, and never finished outside the top five in driver points. On August 30, 2007, John Force announced the creation of The Eric Medlen Project, a safety initiative created to enhance race car safety in all forms of motor racing. Eric Medlen *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 167 SHIFTERS 1979-04 MUSTANG HURST T5/T45 SHIFTER M-7210-M T-5 LEATHER SHIFT KNOB M-7213-A • Fits T-5 and T-45 transmission. Does not fit Tremec 3650 transmission, 2001 and newer Mustang Cobra, Mustang Bullitt, and Mustang GT (3650 transmission has the drain plug in the bottom of the case) • One piece 6061-T6 aluminum CNC machined base • Positive stops to prevent over-travel • Super short throw • Chrome handle and white Hurst knob • Fits 1979-95 V-8 Mustang with T-5 transmission • Fits 1994-04 V-6 Mustang with T-5 transmission • Fits 1996-01 V-8 Mustang with T-45 transmission A leather shift knob similar to the unit found in the Mustang SVO, except has M12 x 1.75 thread, which is compatible with all Mustang/Capri vehicles with screw-on T-5 shift handles. NOTE: This knob will NOT fit M-7210-J/K Hurst T-5 shifter. T-56 SHIFT KNOB M-7213-B SHORT THROW T-5/T-45 SHIFTER M-7210-N • Black leather shift knob with brushed aluminum insert on top, inscribed with 6-speed pattern • Fits 2003-04 Mustang Cobra and most FRPP T-56 transmissions • Does not fit 2005 and newer Mustangs • Fits 1983-01 Mustang with T-5 or T-45 transmission • Adjustable positive stops prevent over-shifting and damaging the transmission • Two-position adjustable height • Compact tower is CNC machined from billet 6061 T-6 aluminum • Accepts stock and most aftermarket shift knobs SHIFT KNOB 5-SPEED M-7213-D • Embossed leather, simulated carbon fiber with brushed aluminum insert on the top, inscribed with 5-speed pattern • Fits 1983-04 Mustang with 5-speed transmissions T-56 CHROME SHIFTER M-7210-T56 • Shifter fits most Ford T-56 variants • Features a chrome handle and a white knob • Does not fit 2005 and newer Mustangs V6 SHORT THROW SHIFTER M-7210-V • Designed by Ford Racing and Hurst • Fits 2005-08 Mustang V6 with T-5 transmission • Spherical bearing with unique shifter rod and OE main stamping • Chrome stalk with white shift knob • Urethane body vibration isolators • Reduced throw See www.fordracingparts.com for the most up-to-date warranty information. SHIFT KNOB M-7213-E • Embossed leather, simulated carbon fiber shift knob, no shift pattern logo • Fits 1983-04 manual transmission Mustang with 5- or 6-speed 2007-08 SVT MUSTANG SHIFTER M-7210-B • Fits 2007-08 SVT Mustang • Standard on Shelby GT500KR • Urethane body vibration isolators • 25% reduction in throw • Bolts in stock location • Requires reuse of production handle and knob See www.fordracingparts.com for the most up-to-date warranty information. 2005-08 MUSTANG GT SHORT THROW SHIFTER M-7210-T1 • • • • • Designed by Ford Racing and Hurst Standard on Shelby GT Fits 2005-08 Mustang GT with 3650 transmission Spherical bearing with unique shifter rod and OE main stamping Comes with stalk for stock shift knob and chrome stalk with white shift knob • Urethane body vibration isolators • 32% reduction in throw See www.fordracingparts.com for the most up-to-date warranty information. 168 Techline (800) FORD788 SHIFT KNOB 5-SPEED M-7213-G • Black leather shift knob with brushed aluminum insert on the top, inscribed with 5-speed pattern • Fits 1983-04 Mustang with 5-speed transmission SHIFT KNOB 5-SPEED M-7213-H • 2003 Mustang Mach 1 production manual transmission shift knob • Aluminum finish inscribed with 5-speed pattern • Fits 1983-04 Mustang with 5-speed transmission *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. TRANSMISSION COMPONENTS UPGRADED SUPER-DUTY T-5 TRANSMISSION M-7003-Z* 1979-93 V-8 only • Heavy-duty “World Class” T-5 5-speed manual transmission with short-throw shifter • 330 lb-ft torque capacity • Gear ratios: 1st 2.95; 2nd 1.94; 3rd 1.34; 4th 1.00; 5th 0.63 • Double-moly 2nd speed, 3rd speed and countershaft cluster gears • Carbon-fiber 3-4 blocker rings • Improved synchronizers and bearings • 1.0625" diameter 10-spline input shaft • Output shaft is 28 spline • 7-tooth speedometer drive gear • Cobra-style pocket bearing • Steel input bearing retainer SERVICE REPLACEMENT PARTS T-5 BEARING RETAINER M-7050-A Fits 1983-93 V-8 applications M-7050-B Fits 1994-95 V-8 applications • Replacement T-5 bearing retainer with steel throwout bearing sleeve • Fits production and Ford Racing T-5 transmissions T-5 LEATHER SHIFT BOOT M-7277-A This upgraded leather shift boot fits all 1983-96 Mustang vehicles equipped with T-5 transmissions, and can be adapted to others. Similar to leather boot in 1984-86 Mustang SVO. 10TH ANNIVERSARY MUSTANG COBRA SHIFT BOOT M-7277-B • Embossed leather, simulated carbon fiber shift boot • Fits 1994-04 Mustangs with manual transmission • Attaching glue not included TREMEC 5-SPEED HD TRANSMISSION M-7003-R58W* (Wide Ratio) T-5 REBUILD KIT M-7000-A* This 94-piece world class T-5 transmission rebuild kit can be used on all of the following T-5 applications: • M-7003-A/X/Z NOTE: • 1985-95 5.0L Mustang ➀ 1987-93 models will require additional • 1985-93 ➀ 2.3L Mustang input bearing and race. See your Ford, • 1985-86 2.3L SVO Mustang Lincoln or Mercury dealer. • 1985-88 ➀ 2.3L Thunderbird Turbo Coupe 3.8L Mustang • 1994-00 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CHASSIS COMPONENTS • Replaces M-7003-R58 • Gear ratios: 1st 3.27; 2nd 1.98; 3rd 1.34; 4th 1.00; 5th 0.68 • Features improved shift forks, one-piece countershaft, gears made of 4615 steel which increases the torque capacity over that of the M-7003-R58 model • Input shaft is 10 spline 1.0625 and the output shaft is 31 spline • Requires a unique bellhousing M-6392-R58 to install in a 1979-95 Mustang • To fit in a 1979-93 Mustang use M-5059-A crossmember • To fit in 1994-95 Mustang, modify vehicle crossmember, lengthen driveshaft .625" and use clutch fork E6ZZ-7515-A • 31-spline driveshaft yoke required • Can be used in 4.6L applications with bellhousing M-6392-M46 • Similar to M-7003-R58 www.fordracingparts.com 169 TRANSMISSION COMPONENTS TREMEC 5-SPEED EXTRA HD TRANSMISSION M-7003-R58C* (Close Ratio) • 600 lb-ft torque capacity • Gear ratios: 1st 2.87; 2nd 1.90; 3rd 1.34; 4th 1.00; 5th 0.82 • Features improved shift forks, one-piece countershaft, gears made of 4615 steel which increases the torque capacity over that of the M-7003-R58 model • Input shaft is 26 spline and output shaft is 31 spline • Requires a unique bellhousing M-6392-R58 to install in a 1979-95 Mustang • To fit in a 1979-93 Mustang use M-5059-A crossmember • To fit in a 1994-95 Mustang, modify vehicle crossmember, lengthen driveshaft .625" and use clutch fork E6ZZ-7515-A • 31-spline driveshaft yoke required • Unique clutch disc designed for 26-spline input must be used • Can be used in 4.6L applications with bellhousing M-6392-M46 ADJUSTABLE #3 CROSSMEMBER (TRANSMISSION MOUNT) M-5059-A This crossmember is a “double hump” design that simplifies installation of dual exhaust systems on Fox vehicles. The outer tubes are not welded to the center support, and thus can be adjusted to fit most engine/transmission combinations. It directly fits all Fox vehicles with a 4.5" dimension between the crossmember mounting brackets. It can be used on Fox vehicles with a 2.75" mounting dimension by relocating the brackets. It does not fit 1982 and later Continental or 1984 and later Mark VII, because they have a unique crossmember. 4.5" MOUNTING DIMENSION YEAR FOX VEHICLE 1980-88 1982-93 1982 1983 and later T-Bird/Cougar Mustang/Capri Fairmont/Zephyr LTD/Marquis YEAR 2.75" MOUNTING DIMENSION FOX VEHICLE 1978-81 1979-81 1981-82 Fairmont/Zephyr Mustang/Capri Granada/Monarch TREMEC 6-SPEED HD TRANSMISSIONS T-56 TRANSMISSION WITH ELECTRONIC SPEEDOMETER M-7003-F* TREMEC 5-SPEED EXTRA HD TRANSMISSION M-7003-R58H* • Close ratio 1st through 4th • 600 lb-ft torque capacity • Gear ratios: 1st 2.87; 2nd 1.90; 3rd 1.34; 4th 1.00; 5th 0.68 • Features improved shift forks, one-piece countershaft, gears made of 4615 steel which increases the torque capacity over that of the M-7003-R58 model • Input shaft is 26 spline; output shaft is 31 spline • Requires bellhousing M-6392-R58 to install in a 1979-95 Mustang • For 1979-93 Mustang applications, use M-5059-A crossmember (79-81 will require modification) • For 1994-95 Mustang applications, modify vehicle crossmember, lengthen driveshaft .625" and use clutch fork E6ZZ-7515-A • 31-spline driveshaft yoke required, M-4841-A recommended • Requires unique clutch disc M-7550-T302 (10.5") designed for use with 26-spline input • Can be used in 4.6L applications with bellhousing M-6392-M46 and Clutch Kit M-7560-T46 (11") • This is the same Tremec HD 6-speed manual transmission used in the 2000 Cobra “R” and the Ford Racing FR500 Mustang • Fits 4.6L SOHC/DOHC engines • Can be used in 1999-04 Mustangs and Cobras • May require shorter driveshaft, modified M-7003-F shown crossmember/transmission mount and other minor modifications • 440 lb-ft torque capacity • Gear ratios: 1st 2.97, 2nd 2.07, 3rd 1.43, 4th 1.00, 5th .80, 6th .62 • Does not have mechanical speedometer connection needed for use in earlier Mustangs • 10-spline input, 31-spline output • 2003-04 Cobras require changing 28 spline yoke to 31 spline T-56 TRANSMISSION WITH MECHANICAL SPEEDOMETER M-7003-G* • • • • • • Has mechanical speedometer drive for 1998 and older modular engine applications Fits 4.6L SOHC/DOHC engines 440 lb-ft torque capacity Gear ratios: 1st 2.97, 2nd 2.07, 3rd 1.43, 4th 1.00, 5th .80, 6th .62 7-tooth speedometer gear 10-spline input, 31-spline output T-56 TRANSMISSION 5.0L M-7003-H* • • • • • For 5.0L/5.8L engine applications 440 lb-ft torque capacity Gear ratios: 1st 2.97, 2nd 2.07, 3rd 1.43, 4th 1.00, 5th .80, 6th .62 7-tooth speedometer gear 10-spline input, 31-spline output T-56 CROSSMEMBER M-5059-B* • Production crossmember from the 2003-04 Cobra Mustang • Fits 1999-04 Mustang when changing to a T-56 6-speed transmission • Includes transmission mount 170 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. M-6375-H46 M-6375-E302 M-6375-G302 AUTOMATIC TRANSMISSION FLYWHEEL PART NUMBER MATERIAL RING GEAR UNBALANCE APPLICATION M-6375-A50 Stamped Steel 164-Tooth 50 oz.-in. M-6375-G302 M-6375-H46 M-6375-E302 Stamped Steel Stamped Steel Stamped Steel 164-Tooth 164-Tooth 157-Tooth 28 oz.-in. 0 Balance 50 oz.-in. Fits 1981-01 5.0L engine with AOD or C-4 trans. with large bellhousing. Will not Fit C-6. Fits 289/302/351W,C,M with large bellhousing C-4 trans. and AOD. Fits 4.6L/5.4L 8-bolt crankshaft with HP 11.25" 4R70W torque converter. Fits 1981-01 5.0L with small bellhousing C-4 trans. 13-1/4" diameter/ 10-1/2" bolt circle. Did you know… 1968-80 302 engines were built with a 28-ounce imbalance factor. 1981-01 302 engines were built with a 50-ounce imbalance factor. 1969-97 351W engines were built with a 28-ounce imbalance factor. 1970-74 351C engines were built with a 28-ounce imbalance factor. NOTE: Severe engine damage will result if you use the wrong flywheel or damper on your engine. DRIVESHAFT YOKE 31 SPLINE M-4841-A • Fits 31 spline output shafts • Uses 1330 U-joints • Use with M-7003-R58C, M-7003-R58W, M-7003-R58H, M-7003-F, M-7003-G, M-7003-H and production T-45, C-6 and 3650 transmissions 28-SPLINE DRIVESHAFT SLIP YOKE M-4841-B • For replacement use or custom driveshaft construction • Fits C-4, AOD and T-5 transmissions • Designed for 1330 U-joint AUTOMATIC TRANSMISSION FLYWHEEL BOLTS M-4216-A300 • 7/16"-20 x .875" bolts • Set of 10 bolts • Can also be used for automatic transmission flywheels 4.6L AUTOMATIC TRANSMISSION FLYWHEEL BOLTS M-6379-A • Fits 4.6L modular engines with automatic transmission flywheels • M10x1x20.5 bolt • Package of 6 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 171 TRANSMISSION COMPONENTS MANUAL TRANSMISSION FLYWHEEL PART NUMBER MATERIAL RING GEAR UNBALANCE APPLICATION M-6375-A302 Billet Steel 157-Tooth 28.2 oz.-in. Pre-1981 302 engines and 351 engines using 157T flywheels. Meets SFI 1.1. Aluminum 157-Tooth 28.2 oz.-in. Cast Iron 157-Tooth 50.0 oz.-in. Billet Steel 157-Tooth 50.0 oz.-in. Pre-1981 302 engines and 351 engines using 157T flywheels. Reduced rotating mass for faster engine acceleration in race applications. Meets SFI 1.1. 1981 and later 302 engines. Exact replacement for 1986-95 Mustang stock unit. 1981 and later 302 engines. Meets SFI 1.1. Aluminum 157-Tooth 50.0 oz.-in. Billet Steel 157-Tooth 0 oz.-in. Nodular Iron 164-Tooth 0 oz.-in. Billet Steel 164-Tooth 0 oz.-in. Billet Steel 164-Tooth 0 oz.-in. M-6375-Z460 Billet Steel 176-Tooth 24.2 oz.-in. M-6375-R00 Aluminum 164-Tooth 0 oz.-in. ➀➂ M-6375-A302A ➀➂ M-6375-B302 ➀ M-6375-C302 ➀➂ M-6375-C302A ➀➂ M-6375-D302 1981 and later 5.0L/302 engines. Reduced rotating mass for faster engine acceleration in race applications. Meets SFI 1.1. All small blocks with 0 unbalance rotating assemblies. Meets SFI 1.1. ➀ M-6375-D46 (6 bolt) ➀➁ M-6375-F46 (6-bolt) ➀➁ M-6375-G46 (8-bolt) ➀➁ ➀➁ 4.6L SOHC Mustang. Has increased RPM capability over stock cast iron flywheel. Fits 10.5" clutch. 4.6L SOHC Mustang. Has increased RPM capability over stock cast iron or M-6475-D46 nodular iron flywheel. Meets SFI 1.1. 4.6L SOHC Mustang GT/DOHC Cobra Mustang. Has increased RPM capability over stock Cobra flywheel. Fits 10.5" and 11" clutch. Meets SFI 1.1. Fits 1979-97 460 including M-6007-C460/D460/A514. For external balance only. Long style clutch. Meets SFI 1.1. Used on the 2000 Cobra “R” Mustang. Fits Cobra 4.6L/5.4L DOHC 4-valve engines and other Mustangs with 8-bolt crank. Reduced rotating mass for faster engine acceleration in race applications. Fits 10.5" and 11" clutch. Meets SFI 1.1. NOTES: ➀ Diaphragm clutch uses metric bolts and dowel pins. Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-B. Ford Racing kit M-6397-A302, see below. ➁ 4.6L engines may have 6 or 8 bolts to attach to the crankshaft. Check the engine code before ordering. Romeo built engines have 6 bolts and Windsor built engines have 8 bolts. All Cobra engines have 8 bolts. ➂ Has bolt-on counterweight 4" long for A302, 7.2" long for C302. M-6375-A302 shown 11" CLUTCH BOLT KIT M-6397-A46 • Use with Ford Racing flywheels to align and attach the 11" diaphragm-style clutch and pressure plate to the flywheel • This kit includes 3 dowel pins that are necessary to align and stiffen the pressure plate shell. NOTE: If the dowels are not used the clutch may chatter and the engine vibrate • Includes pressure plate bolts and dowel pins for use with 11" modular flywheel 172 Techline (800) FORD788 PRESSURE PLATE BOLT AND DOWEL KIT M-6397-A302 • Use with Ford Racing flywheels to align and attach the 10.5" diaphragm-style clutch pressure plate to the flywheel • This kit includes 3 dowel pins that are necessary to align and stiffen the pressure plate shell. NOTE: If these dowels are not used the clutch may chatter • This kit includes 6 bolts (8mm) with integral lock washers. NOTE: Ford Racing and production flywheels have metric bolt holes for diaphragm-style clutches. Ford Racing billet steel flywheels also have 5/16"-18 SAE bolt holes for “long” style clutches. MANUAL TRANSMISSION FLYWHEEL BOLTS M-4216-A200 Sold in pkg. of 100 M-4216-A210 Sold in pkg. of 10 7.16"-20 x .9375" bolt 4.6L MANUAL FLYWHEEL BOLTS M-6379-B • Fits 4.6L modular engines with manual transmission flywheels • M10x1x26.5 bolt • Package of 8 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. BELLHOUSINGS AND CLUTCHES BELLHOUSINGS M-6392-E 1979-93 5.0L T-5 Bellhousing UNIVERSAL SAFETY BELLHOUSING M-6392-C • Can be used as a replacement part or for building a kit car or street rod • Cast aluminum, produced from the original production tooling • Steel safety bellhousing with block plate • Fits 1979-93 Mustangs with T-5 or Tremec 5-speeds and cable operated clutch linkage • Will not work with long-style pressure plate • May interfere with long tube headers M-6392-M46 4.6L/5.4L Tremec 3550 Cobra “R” Bellhousing • Use to mate the Tremec 3550 transmission to the 4.6L/5.4L modular engines • Minor modification is required for transmission clearance and mounting in some applications • Cast aluminum production style bellhousing BELLHOUSING M-6392-R58 • Unique clutch housing required for Tremec 5-speed transmission used in the 1995 Mustang Cobra “R” models with 351W • Will also fit 289/302/351C engines • Requires diaphragm-type clutch TECH TIPS CLUTCH/TRANSMISSION INSTALLATION TIPS The first step is to check bellhousing face runout. You are checking for parallelism of the back of the bellhousing to the back of the block. Install the dial indicator (as shown in Fig.1). Rotate the crankshaft and mark down the reading. Be sure to push the crankshaft against the thrust bearing for an accurate reading. Maximum runout is .010. The next step is checking bellhousing bore runout. You are checking to see if the bellhousing bore centerline is aligned with crankshaft centerline. Reposition the dial indicator in the bellhousing bore (as shown in Fig. 2). Rotate the crankshaft and mark down the readings. Maximum out of concentricity is .015. If the bore runout is out of spec. install appropriate offset dowels. Offset alignment dowels can be purchased from Lakewood. .007 PN 15950 .014 PN 15960 .021 PN 15970 Fig. 1 Fig. 2 Face of housing (must be clean and free of nicks, burrs or foreign material). *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CHASSIS COMPONENTS 1986 and newer V-8 Mustangs The flywheel to crankshaft bolts must be hand-torqued to 75-85 lb-ft (302/351W) and 54-64 lb-ft (4.6L) The 10.5" pressure plate bolts must be torqued to 12-24 lb-ft and 11" pressure plate bolts to 33 lb-ft + 1/4 turn. Be sure to use the alignment dowels in the flywheels. Pressure plate bolts and alignment dowels for the 10.5" clutch can be purchased using PN M-6397-A302. Pressure plate bolts N808969S100 and alignment dowels PN D1FZ-6397-B are for the 11" pressure plate. Evenly tighten bolts in a circular direction one turn at a time. Bellhousing alignment is crucial for proper clutch and transmission function. Due to production tolerances of engine blocks and bellhousings, it is possible for the transmission centerline and crankshaft centerline to be misaligned. Misalignment can cause transmission gear wear, transmission jumping out of gear, driveline vibration, clutch pedal vibration, pilot bearing noise, release bearing noise or excessive clutch spin time. It may also damage the pilot bearing, transmission mainshaft bearing and clutch hub. It will also cause harsh shifting. Before installing the bellhousing, check the block mounting surface and bellhousing surfaces for nicks, dents, paint debris, etc. These are some things that could affect the accuracy of your measurements. HOW TO CHECK BELLHOUSING ALIGNMENT Level tip rides on bore surface. This surface must be clean and free of nicks, burrs or foreign material. www.fordracingparts.com 173 CLUTCHES CLUTCHES PART NUMBER DESCRIPTION ENGINE DIAMETER TECHNICAL INFORMATION V-8 10.5" HD organic lining. Component of M-7560-A302/C302 kits. Disc V-8 10.5" Disc V-8 10.5" V-8 10.5" Pressure Plate V-8 10.5" M-7563-C302N Pressure Plate V-8 10.5" V-8 10.5" V-8 10.5" HD disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. HD disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. Designed for 26-spline shaft on M-7003-R58C, M-7003-R58W and M-7003-R58H transmissions. Will work with M-7563-A/B/C/D302 pressure plates. HD diaphragm type with approx. 40% more capacity than stock Mustang unit. Nodular iron plate. HD diaphragm type with centrifugal assist. Has approx. 25% more capacity than stock Mustang unit. Cast iron plate. HD “King Cobra” diaphragm type. Same capacity a M-7563-A302N above, but stronger cover and revised internal geometry reduce clutch pedal effort by 10%. Nodular iron plate. Consists of M-7550-A302N disc, M-7563-A302N pressure plate and D9ZZ-7548-A throwout bearing. Consists of M-7550-A302N disc, M-7563-C302N pressure plate and D9ZZ-7548-A throwout bearing. 4.6L 11" 11" Clutch Kit V-8 11" 11" Clutch Upgrade Kit 4.6L DOHC 11" M-7550-A302N Disc ➀➁➂ M-7550-X302 ➀➁➂ M-7550-T302 ➀ M-7563-A302N Pressure Plate ➀➂➃ M-7563-B302 ➀➂➃ ➀➂➃ M-7560-A302N Mustang HD ➀➁➂➃ M-7560-C302N ➀➁➂➃ M-7560-T46 Clutch Kit Mustang HD “King Cobra” Clutch Kit 11" Clutch Kit ➀ M-7560-D46 ➀ M-7060-C46 ➀➁ M-7060-A54 ➀ 5.4 DOHC 215 mm Kit contains 11" clutch disc with 26-spline hub and pressure plate. Clutch disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. Centrifugal assist design pressure plate with 25% more torque capacity than production Cobra. Used when installing M-7003-R58C and M-7003-R58H transmission into 1996-04 4.6L Mustangs with production 11" flywheel or Ford Racing flywheels M-6375-F46, M-6375-G46 or M-6375-R00. Kit increases clutch capacity of the 1996-98 Mustang Cobra 4.6L DOHC 4V by 10% and increases clutch disc burst speed 10% over 1999-01 Cobra. Kit contains 2003 Cobra 11" pressure plate and 11" clutch disc. This kit increases clutch capacity by 10% on 1996-98 Cobra 4V vehicles. It consists of the production 1999 Cobra 4V flywheel, 11" clutch/pressure plate assembly and attaching bolts/dowel pins to replace the 10.5" clutch assembly in the 1996-98 Cobra 4V vehicles. Original equipment on 2007 SVT Mustang. Dual clutch disc decreases clutch diameter and reduced rotating mass for faster engine acceleration. Designed for use with 26-spline input shaft and 8-bolt crankshaft. NOTES: ➀ Clutches have NO warranty! ➁ All clutch discs have 1.0625"-10 spline hub. ➂ Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission and 1999-03 Cobra use an 11" clutch. OK to mix and match Ford Racing clutch discs and pressure plates, but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel (see page 172). Metric fasteners and dowel pins must be used with 10.5" clutches. ➃ Requires metric pressure plate bolts N602549-S51M and alignment dowel pins D1FZ-6397-B. Ford Racing kit M-6397-A302 (see page 172). 174 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CLUTCH COMPONENTS V-8 MUSTANG CLUTCH LINKAGE UPGRADE KIT M-7553-A302 This kit consists of a beefed-up clutch release fork and heavy-duty, selfadjusting Teflon-lined clutch cable. Fits 1979-93 Mustang. NOTES: ➀ 1984 and later cars have heavy-duty cable as original equipment. ➁ 1986 and later cars have beefed-up clutch release fork as original equipment. ➂ To install this kit in 1979-81 vehicles with manual adjustment clutch mechanisms, the 1982 and later self-adjusting quadrant mechanism must be purchased from Ford, Lincoln and Mercury dealers. TOPSIDE CLUTCH ADJUSTER M-7554-A • Allows you to adjust clutch engagement without going under the car • Eliminates the rubber bushing at the engine compartment bulkhead for more precise clutch action DOUBLE-HOOK CLUTCH QUADRANT M-7583-A • Fits 1982-04 V-8 Mustang • Double-hook design lets you use an adjustable clutch cable or Topside Clutch Adjuster and stock cable • CNC machined from billet aluminum V-8 MUSTANG ADJUSTABLE CLUTCH LINKAGE KITS M-7553-B302 Cable and Quadrant 1982-95 M-7553-C302 Service Cable 1982-95 M-7553-D302 Cable and Quadrant 1996-04 M-7553-E302 Service Cable 1996-04 • Includes all parts required to convert stock non-adjustable clutch cable to fully adjustable type • Now you can adjust clutch pedal travel to your driving habits MUSTANG SN95 CLUTCH LEVER M-7515-A • Stock replacement clutch lever • Fits 1996-04 V-8 Mustang CHASSIS COMPONENTS HD THROWOUT BEARING M-7548-A ROLLER PILOT BEARING M-7600-A ROLLER PILOT BEARING M-7600-B • Fits 1979-2004 Mustangs with manual transmission and V-8 engine • Self-centering bearing design • Heavy-duty design lasts longer than most aftermarket bearings • Production roller pilot bearing fits 289, 302, 351C and 351W crankshafts • Designed for .669" diameter input shaft NOTE: Pre-greased—do not add extra grease. Clutch and bearing damage may occur. • Production roller pilot bearing fits 4.6L modular engines NOTE: Pre-greased—do not add extra grease. Clutch and bearing damage may occur. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 175 TRANSMISSION COMPONENTS HD TRANSMISSION OIL COOLER KIT (SELF-REGULATING) M-7095-SR Unique patented “stacked-plate” design offers 35% improvement in efficiency over fin-and-tube coolers. The .75" x 7.25" x 11" unit weighs only 2.5 lbs., but has a full 18,000 lbs. GVW rating. The self-regulating design feature bypasses cold transmission fluid automatically (without thermostats or valves) until its viscosity decreases and allows fluid to flow through the main body of the cooler. SAE thread fittings. ALUMINUM TRANSMISSION PAN M-7195-T E40D/4R100 Deep Sump A.T. DIPSTICK/TUBE M-6750-D303 C-4 M-6750-E303 C-6 • Cast aluminum transmission pan with cooling fins and Ford Racing logo cast in the bottom • Pan holds approximately 2 quarts additional ATF • Kit includes mounting hardware • Filter and pan gasket not included FORD RACING PERFORMANCE PARTS USED: Max Craft’s 1951 Mercury 176 Techline (800) FORD788 FRPP 460 Crate Engine FRPP Street Rod Gauges *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. ACCESSORIES MUSTANG GT SPECIAL EDITION BADGE M-1447-B • “Bullitt” decklid emblem from 2001 Special Edition Mustang • Two-way tape for easy installation 1996-98 COBRA INTAKE PLAQUE M-1447-D46 • • • • • “Cobra” intake plaque from 1996-98 Cobra upper intake manifold Design in the shape of the “Cobra” snake High-quality embossed Cobra snake Blue inlay on brushed aluminum background Two-way tape for easy installation ALUMINUM FUEL DOOR M-2301-E 2001 Special Edition Mustang Aluminum Fuel Door 1999-01 COBRA INTAKE PLAQUE M-1447-F46 • “Cobra” intake plaque from 1999-01 Cobra upper intake manifold • Design in the shape of the “Cobra” snake • High-quality embossed Cobra snake • Blue inlay on brushed aluminum background • Two-way tape for easy installation • • • • • Original equipment on 2001 Special Edition Mustang Manufactured by the OEM supplier, not a reproduction part Fits 1999-04 Mustang Fits 1997-03 F-150 with round fuel door Fits 2000-05 Focus with modifications to the fuel filler neck plastic box • 6.250" diameter ALUMINUM AND URETHANE SPECIAL EDITION MUSTANG PEDAL COVERS M-2301-A Accelerator Pedal M-2301-B Brake or Clutch Pedal Cover (1 per package) M-2301-C Left Foot Dead Pedal • Original equipment on 2003 Mustang Mach 1 • Similar font and graphics to vintage Mustang Mach 1 • Two-way tape for easy installation • Direct replacement for stock pedals and pedal covers • Easy to install, no drilling required • Brushed aluminum finish with urethane knobs for better grip • Custom styling for the muscle car enthusiasts • Fits 1994-04 Mustang COBRA SNAKE FENDER EMBLEMS M-1447-SR CHROME V-8 BADGE M-7843-V8 STAINLESS STEEL FORD RACING LICENSE PLATE M-1828-SS304B • Original equipment on 1994-04 SVT Mustang Cobra • Includes right- and leftside emblems • Two-way tape for easy installation • Two-way tape for easy installation • 2.5" tall, 1.5" wide • Dress up your vehicle with this high-quality license plate frame • Brushed 304 stainless steel with black laser-etched Ford Racing logo MACH 1 DECK LID EMBLEM M-1447-M1 SVT DECK LID EMBLEM M-1447-SVT • Original equipment on SVT Mustang Cobra and SVT Contour • Similar to SVT emblem used on SVT Focus • Two-way tape for easy installation FORD OVAL LICENSE PLATES (12/PK.) M-1828-F FORD RACING LICENSE PLATES (12/PK.) M-1828-FR • This license plate has a blue Ford Oval on white background • Sold in packs of 12 • Check with your Ford Racing distributor for single plates CM-1828-FCM • This license plate has a blue Ford Oval with red Racing logo on white background • Sold in packs of 12 • Check with your Ford Racing distributor for single plates CM-1828-FRCM *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 177 GAUGES MASTERPIECE GAUGE COLLECTION M-19017-A961 GOLD BEZEL SERIES (KIT) ➀ • Luxurious finishes embossed with Ford emblem • Gold design with cream background, beige sweep zone, dark brown graphics and needle-style pointer Oil Pressure Gauge Water Temperature Gauge Fuel Level Gauge Speedometer Battery Voltage Gauge • Chrome design with white background, gray sweep zone, black graphics and needle-style pointer • Chrome design with black background, white graphics and needle-style pointer M-19017-B961 CHROME BEZEL SERIES (KIT) ➀ • Includes all components necessary to install • Electronic operation, except Speedometer, which is mechanical. Case diameter is 3-1/8" (speedometer) and 2-1/16" (water, oil, fuel and battery) Oil Pressure Gauge Water Temperature Gauge Fuel Level Gauge Speedometer Battery Voltage Gauge • Fuel level sender compatibility is 240 OHM empty, 33 OHM full – 12 volt • Fuel level sender is adjustable from 6" to 23" M-19017-C961 BLACK FACE SERIES (KIT) ➀ Oil Pressure Gauge Water Temperature Gauge • Speedometer, oil pressure gauge and sender, water temperature gauge and sender, fuel level gauge and sender and battery voltage gauge Fuel Level Gauge Speedometer Battery Voltage Gauge NOTES: ➀ 5-gauge kits include: speedometer, oil pressure gauge and sender, water temperature gauge and sender, fuel level gauge and sender and battery voltage gauge. ➁ Tachometer is not included in 5-gauge kits. Only available individually. ➂ Needles do not zero. MASTERPIECE CLOCKS* M-15000-A961 Gold M-15000-B961 Chrome M-15000-C961 Black *Not included in this kit, but individual units are available. Case diameter is 2-1/16". TACHOMETERS M-17360-A961 Gold ➁➂ M-17360-B961 Chrome ➁➂ M-17360-C961 Black ➁➂ *Not included in above kits, but individual units are available. Case diameter is 3-1/8". 178 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. FORD RACING COMPETITION GAUGES Ford Racing is proud to introduce our line of competition-style gauges. These high-quality gauges, available in 2-1/16" and 2-5/8" diameters along with our 5" tachometer with shift light, all sport the red and blue Ford Racing logo on a white background with black numerals. M-10835-A200 M-9275-A200 M-10883-A200 M-11622-A200 M-9278-A200 2-1/16" electrical voltmeter gauge 8-18 volts 2-1/16" mechanical fuel pressure gauge 10-100 PSI 2-1/16" mechanical water temperature gauge 140º-220ºF 2-1/16" mechanical boost pressure gauge 30" HG-30 PSI 2-1/16" mechanical oil pressure gauge 0-100 PSI M-10835-A258 M-9275-A258 M-10883-A258 M-11622-A258 M-9278-A258 2-5/8" electrical voltmeter gauge 8-18 volts 2-5/8" mechanical fuel pressure gauge 10-100 PSI 2-5/8" mechanical water temperature gauge 140º-220ºF 2-5/8" mechanical boost pressure gauge 30" HG-20 PSI 2-5/8" mechanical oil pressure gauge 0-100 PSI PRYOMETER GAUGE M-10885-A200 DIGITAL PERFORMANCE GAUGE M-10898-A100 • 2-1/16" Pryometer measures from 1-1600ºF • Includes K-type thermocouple • Standard 2-1/16" gauge diameter • Gauge Displays: 1/4 mile, 0-60, and 60-0 times estimated horsepower acceleration, decceleration and lateral g’s • An excellent way to measure performance modifications to your vehicle even when a fully timed track is not available! FORD RACING COMPETITION SHIFT LIGHT TACHOMETER Our Ford Racing 10,000 RPM tachometers are designed and built for professional competition. They are fully electronic and do not require a tach-drive distributor for hook-up. They can be adapted to 4-, 6- and 8-cylinder engines and used with Ford, MSD, and most other electronic ignition systems. Ties into dash lights for night driving. CHECK THESE OUTSTANDING FEATURES: • Comes with all hardware, including shock• Accurate, dependable readings up to resistant mounting and bracket 10,000 rpm • Driver adjustable shift point • Quick response, without pointer flutter • “Dial-in” shift point accuracy • Bold 5" diameter dial with bright red pointer • Push-button recall for verification • Easy-to-read black numbers and • High-intensity shift light graduations on white background with red NOTE: 1999 and newer vehicles will require needle and Ford Racing logo M-17360-A201 additional components, sold separately. • Bright lighting for night racing Ford Racing logo HARLEY BOOST GAUGE M-11620-H200 • Designed for 2002-03 Limited Edition Supercharged Harley-Davidson F-150 • 30" HG-Vac./20 psi boost • Includes all necessary installation hardware and instructions • Gauge face similar to Harley gauge faces with Ford Racing logo • Mounts on steering column *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 179 ACCESSORIES FORD RACING FLOOR MATS M-13086-B 1994-04 Mustang M-13086-C 2005-07 Mustang M-13086-F 2005 F-250 “FORD RACING” DECALS • Constructed with 18 oz. nylon with PVC backing • Factory-style anti-slide hook hole and bottom grip knobs • Black mats with 3-color Ford Racing logo • Kit contains 1 pair front floor mats “Ford Racing” decals with adhesive backing that easily peels off for fast application. Pkg. of 10 M-1820-A2 Medium 7" x 3-3/4" “FORD RACING” MINI-DECALS Pkg. of 25 M-1820-B1 Single sheet of “peel-off” vinyl decals. Includes 4 small, 1 medium and 1 large decal. Overall size of group—approximately 6" x 1-3/4". White with blue “Ford” and red “Racing.” E-Z UP® INSTANT SHELTERS® Ford Racing E-Z UP® Instant Shelter® includes: top, frame and cover bag; blue with white logo. PART NUMBER SIZE M-1827-T10 M-1827-T15 M-1827-T20 10' x 10' 10' x 15' 10' x 20' ACCESSORIES Ford Racing E-Z UP® Instant Shelter® Sidewall with large Ford logo; blue with white logo. PART NUMBER SIZE M-1827-W10 M-1827-W15 M-1827-W10 10' Sidewall 15' Sidewall (2) 10' Sidewalls* *Two 10' sidewalls are required to cover a 20' section. ORDER THESE PRODUCTS FROM ANY FORD RACING DEALER. NO RETURN ON SPECIAL ORDERS. “FORD RACING” BANNER M-1827-A1 “Ford Racing” (68" x 28") • Strut your stuff with these multi-purpose banners • Ideal for races, car shows, car clubs, promotions, garage or den • White with blue lettering on heavy gauge plastic • Has 5 brass grommets and tie straps 180 Techline (800) FORD788 “FORD RACING” 50-FT. PENNANT STRING M-1827-P1 • Ideal for races, car shows, car clubs, promotions, garage or den • White with blue lettering on heavy gauge plastic “FORD RACING” VINYL DIE CUT 15" DECAL M-1820-FR15 • 15" Ford Racing logo decal red and black • Die cut decals are cut around the letters and logos within the decal to make it appear to be printed directly onto surface after it is applied • Sold in package of 10 ACCESSORIES HIGHWAY SAFETY KIT M-19515-A • Remember safety is always first at Ford Racing! • Silkscreened with Ford Racing logo • Includes flares, first aid kit and emergency triangle reflectors HOOD LATCH & PIN KIT M-16700-A • That “competition look” you’ve always wanted is available from Ford Racing • This is similar to the original hood pin kit used on early Mustangs and Fairlanes • Can be used with most original and aftermarket hoods • This part is not designed to fit on the 2005-08 Mustang “FORD RACING” FENDER COVER M-1822-A2 Blue Protect that beautiful paint job from scratches, chemicals and oil with this strong, sturdy and slip-resistant “Ford Racing” fender cover. Measures 27" x 36" and is acid- and grease-resistant. Features handy “ridged” area in which to place small tools and parts. FORD RACING MUSTANG STEERING WHEEL M-3601-B Fits 1994-04 Mustang V-6, GT and Cobra. Features thicker, racing-style rim section, covered in perforated and smooth black leather. Uses OE airbag and cruise control switches (not included). Direct replacement for OE steering wheel. www.fordracingparts.com 181 TOOLS 4WD LOCKNUT SOCKET SET M-1197-T4543 REAR AXLE AND BEARING PULLER M-4006-T6540 • For removal and installation of axle locknuts on Ford Trucks • Kit contains 5 sockets with 1/2" square drive and FWD front spindle puller • Spindle puller fits spindle thread sizes 2"–16, 1-5/8"–16, and 38 mm–1.5 • Fits high-shear rotating nuts on 1985–newer F-250 and F-350 truck rear axles, and Dana 80 rear axles of Ford Super Duty trucks • Fits front axle locknuts on 1986–newer F-Series 1/2-ton trucks, full-size Bronco with Dana 44 axle, 1984-92 Ranger, and Bronco II with manual hubs • Fits front axle locknuts on 1978-84 F-Series 4WD heavy-duty 3/4- and 1-ton trucks • Fits front axle locknuts on 1993–newer Ranger, Bronco II, and Explorer with manual hubs. 1995–newer F-Series 1/2-, 3/4- and 1-ton trucks and full-size Bronco with manual hubs. 1959-85 F-Series 1/2- and 3/4-ton trucks and full-size Bronco with manual hubs • Kit includes slide hammer and attachments for removing rear axles BRAKE CALIPER PIN REMOVAL TOOL M-2300-T7299 DIFFERENTIAL HOUSING SPREADER TOOL M-4010-T7071 • This tool is the damage-free way to remove caliper pins from 1986-88 E- and F-Series, 1983-88 Ranger and 1984-88 Bronco II • Simplifies the removal and installation of ring and pinion gears and differential assemblies • Spreads the differential housing on 7.5", 8.8" and Dana 30 through 70 axle housings • Highly recommended on Cobra aluminum 8.8" IRS housings • Helps prevent component damage that often results from using “homemade” devices REAR DISC CALIPER RETRACTION TOOL M-2588-T7317 • Use to properly retract the caliper piston when changing brake pads in vehicles with rear disc brakes equipped with internal parking brake mechanism • Universal kit fits most Fords, some GMs and others EXHAUST HANGER REMOVAL TOOL M-5230-T7677 • Unique pliers for removing push-through exhaust hangers from rubber isolating blocks • Makes it easy to change factory and Ford Racing exhaust systems PINION AND DIFFERENTIAL BEARING PULLER M-4209-T7794 • Enables you to remove pinion bearings and carrier bearings on RWD and 4WD differentials • Allows damage-free removal of bearings • For use on Ford 6.75", 8.5", 8.7", 9" and Dana 28, 30, 35, 44, 50, 60, 70, 70HD and 80 differentials • Also fits many other applications 182 Techline (800) FORD788 1,000-LB. CAPACITY ENGINE STAND M-6001-T1726 TORQUE ANGLE GAUGE M-6015-T4554 • Capable of supporting engines up to 1,000 lbs. • Engine can be rotated a full 360˚ with a turn of the handle • Locking pin secures the work in any of eight positions • Easy one-bolt disassembly for transport of stand • Meets ANSI PALD for safety and quality • Made in USA. Covered by Lifetime Marathon Warranty® • Weighs 96 lbs. • Measures angle of rotation after pre-torque in torque-angle applications • A must when tightening torque-to-yield fasteners • 360˚ scale marked in 2˚ increments • Has 1/2" male and female square drives ZETEC CAM TIMING TOOL KIT M-6256-T6486 • Kit includes cam bar and crank stop • Provides precise timing alignment for engine assembly MODULAR ENGINE CAM TIMING TOOL KIT M-6256-T6487 4,000-LB. CAPACITY FOLDING ENGINE HOIST M-6001-T2004 • • • • • 4,000-lb. capacity engine hoist with a reach of 25" to 46" Maximum capacity, boom retracted: 4,000 lbs. Maximum capacity, boom extended: 1,000 lbs. Maximum height, boom extended: 104" Folds up for compact storage, 16" x 18" floor space • Includes 3 cam positioning tools and 1 cam holding tool • For use on all modular 4.6L and 5.4L V-8 and 6.8L V-10 engines • Includes molded storage case CRANKSHAFT POSITIONING TOOL M-6303-T6024 • For use on 1993 and newer modular 4.6L 2V and 4V, 5.4L 2V and 4V, and 6.8L V-10 engines • Should be used in conjunction with cam alignment tool M-6303-T6024 • Necessary to eliminate valve to piston interference during disassembly and assembly ENGINE PRE-OILER M-6600-T6492 • Required to prime engines with crank-driven oil pumps • Prime your engine through the oil pressure sending unit port • Perfect for modular engines that have crank-driven oil pumps • Prevents engine damage caused by only using starter motor to prime oiling system www.fordracingparts.com 183 TOOLS REAR MAIN SEAL INSTALLATION TOOL M-6701-T7786 FUEL PRESSURE GAUGE TOOL M-9593-T6551 • Accurately ensures correct depth on crankshaft seal • Attaches to crankshaft to press seal in evenly • 4-cylinder applications: 2.0, 2.3, 2.3 OHC, 2.5, 2.5 OHC • V-6 applications: 3.0, 3.4 SOHC, 3.8 • V-8 applications: 4.6, 5.0, 5.8 • Includes adapter for Schrader valve and 4 fittings • Allows you to check fuel pressure and fuel volume • Professional quality CLUTCH COUPLING TOOL FOR 1988 AND NEWER TRUCKS M-7553-T7646 • Disconnects hydraulic clutch line from hydraulic slave cylinder • Works on 1988–present F-Series, Bronco, Bronco II, Ranger and Explorer • Works on 1989-97 Thunderbird and Cougar FUEL PRESSURE GAUGE TOOL WITH HOSES M-9593-T7211 • Includes 30" pressure hose and 6' bleed hose • Includes fittings and 0-100 PSI easy-toread 3-1/2" diameter pressure gauge • Professional quality FUEL INJECTOR CLEANER M-9593-T7448 PILOT BEARING PULLER TOOL M-7600-T7318 • Designed to pull pilot bearings in areas a slide hammer will not fit • Fits 1/2" to 1-1/2" ID TRANSMISSION LINE DISCONNECT TOOL KIT M-9500-T7798 • Kit contains 2 tools • Disconnect tools for transmission quick-connect fittings on most late model Fords • Releases the finger on the transmission to radiator oil cooler line without damaging the hose or connector • Works on some oil cooler lines also 184 Techline (800) FORD788 • The most effective method of cleaning fouled injectors • Connects to your shop’s pressurized air supply • Includes gauge, 72" hose, underhood hanger and instruction manual POWER STEERING PULLEY REMOVER/INSTALLER M-10300-T7830 • Kit contains necessary tools for removal and installation of power steering pump pulleys on most Ford vehicles • Also works on many non-Ford vehicles FUEL LINE DISCONNECT TOOL M-9280-T7337 3-TON STINGER JACK STANDS M-17080-T1772 • Easily disconnects spring lock fuel line fittings • Spring loaded and durable • The design encloses the line to help deflect spray during disassembly • 3-ton (6,000-lb.) capacity • Stands conform to ANSI PALD-4 load rating standard; factory tested before shipment • Height range: 11" to 17-5/8" • Sold in pairs 3-TON CAPACITY RATCHETING JACK STANDS M-17080-T1733 • Manufactured by OTC for Ford Racing • 3-ton (6,000-lb.) capacity • These jack stands feature a formed-steel frame for strength and long life, and rolled-base edges that resist sinking into asphalt • Recessed column saddle for acceptance of vehicle panel rail (pinch weld) • Made in USA, covered by Lifetime Marathon Warranty® • Stands conform to ANSI PALD-4 load rating standard • Height range: 12-1/2" to 18-1/2" • Sold in pairs FORD RADIO REMOVAL TOOL M-19061-T7575 • These tools release the retaining clips of the radio faceplate, allowing you to pull the radio from the instrument panel AIR CONDITIONING DISCONNECT TOOLS M-19623-T7238 • Quickly separates spring lock refrigerant lines and some spring lock fuel rail couplings • Set of four: white, red, blue and black “FORD RACING” FENDER COVER M-1822-A2 Blue Protect that beautiful paint job from scratches, chemicals and oil with this strong, sturdy and slip-resistant “Ford Racing” fender cover. Measures 27" x 36" and is acid- and grease-resistant. Features handy “ridged” area in which to place small tools and parts. www.fordracingparts.com 185 EXHAUST COMPONENTS 2.3L FOCUS CATBACK SYSTEM M-5200-D234* FOCUS LONG TUBE HEADER KIT M-9430-ZX3L* M-9430-ZX3LC* Coated • Stainless steel catback exhaust system • Performance tuned, low back pressure • Fits 2003-05 Focus ZX4 with 2.3L engine The 2000-04 Focus 2.0L Zetec long tube header kit includes a modified SVT Focus long tube 409 stainless steel header, modified SVT heat shields (uncoated header only), revised EGR tube, SVT dipstick and tube. Use with production SVT Focus catalyst part number 2M5Z-5E212-AA and flex pipe part number 2M5Z-5G203-AA, sold separately. For maximum performance use with aftermarket catback exhaust system. M-5200-D234 shown 2.0L SVT FOCUS CENTER EXIT EXHAUST M-5200-ZXC* COATED LONG TUBE SVT FOCUS HEADER M-9430-SVTFC* • Original equipment header, ceramic coated for heat resistance and durability • 4-2-1 design is engineered to correctly collect the exhaust pulses resulting in maximum torque and horsepower • T-409 stainless steel construction • Fits 2002-2004 2.0L SVT Focus ZX3/5 • Stainless steel catback exhaust system • Center rear exit • Requires SVT rear fascia (M-17835-F) and separate center exit rear diffuser M-17835-F1 • Fits 2002-04 SVT Focus 3-door/5-door and 2000-04 Focus ZX3 and ZX5 with 2.0L Zetec engines Photo may vary 2.3L FOCUS CENTER EXIT EXHAUST M-5200-D23C* FOCUS MUFFLER M-5200-ZX3* • Fits 2000-04 Focus ZX3 and ZX5 with 2.0L Zetec • Performance tuned, low back pressure muffler • Stainless steel catback exhaust system • Performance tuned, low back pressure • Center rear exit • Fits 2003-04 Focus ZX3 and ZX5 with 2.3L and 2.3L PZEV engines • Requires SVT rear fascia (M-17835-F) and separate center exit rear diffuser M-17835-F1 SVT FOCUS CENTER EXHAUST DIFFUSER INSERT M-17835-F1* SVT FOCUS MUFFLER M-5200-ZX4* • This center insert is required when installing M-5200-ZXC or M-5200D23C center exhaust • Insert fits SVT Focus rear fascia (M-17835-F) only 186 Techline (800) FORD788 • Fits 2002-04 SVT Focus ZX3 and ZX5 • Performance tuned, low back pressure muffler *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. DRIVELINE & SUSPENSION ALUMINUM FUEL DOOR M-2301-E 2001 Special Edition Mustang Aluminum Fuel Door • Original equipment on 2001 Special Edition Mustang • Manufactured by the OEM supplier, not a reproduction part • Fits 1999-04 Mustang • Fits 1997-03 F-150 with round fuel door • Fits 2000-05 Focus with modifications to the fuel filler neck plastic box • 6.250" diameter FOCUS TORSEN DIFFERENTIALS M-4204-F20 MTX-75 transaxle M-4204-SVTF 2002-04 SVT • • • • Torsen T-2 type differential Features full-time torque-sensing, torque-biasing Responds immediately to variable driving conditions Provides better traction, acceleration and handling than the factory open differential CENTERFORCE CLUTCH KIT M-7563-Z3 Focus ZX3 and ZX5 • Fits Focus 2.0L Zetec, built after October, 2000 with MTX-75 transmission • Update your Focus final drive ratio from 3.82 to 4.06 • Professional installation may be required • Centerforce “Dual Friction” clutch system improves clamping force by more than 90% • Improves clutch feel while maintaining easy pedal effort • Includes clutch disc and pressure plate • Fits 2000-04 2.0L Zetec Focus ZX3/4/5, not applicable to SVT FOCUS ZX3 ANTI-ROLL BAR KIT M-5400-Z3 FOCUS ADJUSTABLE REAR SUBFRAME M-5035-ZX3 • • • • • • • • • • Complete your suspension update with a tuned anti-roll bar kit Add stability and cornering grip Red powder coat finish 22 mm diameter front bar and 25 mm diameter rear bar May require M-5035-ZX3 if not equipped with a factory rear sway bar Fits 2000-07 ZX3/4/5 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. CHASSIS COMPONENTS 4.06 FINAL DRIVE KIT M-7343-A* Fits 2000-07 Focus ZX3/4/5 Allows easy camber adjustment Features anti-sway bar mounts May be required to mount rear stabilizer bar (M-5400-Z3) on 2005-07 Focus www.fordracingparts.com 187 SUSPENSION COMPONENTS 2000-05 PERFORMANCE FOCUS SPRINGS M-5560-ZXM* 2000-05 Focus except wagon M-5560-ZXM1* 2006-07 Focus except wagon 2000-05 FOCUS DYNAMIC DAMPER KIT M-18000-ZXM* 2000-05 Focus except wagon M-18000-ZXM1* 2006-08 Focus except wagon • Lowers vehicle approximately 1.5" • Gives a more aggressive looking stance as well as increased handling dynamics • May cause slightly harsher ride compared to stock springs NOTE: Some factory fasteners are one-time use. Please reference Ford service manual for reuse information and correct torque specifications. • Tuned for track • Dynamic dampers - same manufacturer as those on the Mustang FR500C race car • Kit incudes front struts and rear shocks FOCUS PERFORMANCE SPRING KIT M-5560-ZX3B FOCUS DAMPER KIT M-18000-ZX3 Fits 2000-05 Focus except wagon M-18000-ZX3B Fits 2006-07 Focus except wagon • • • • Improves handling Fits 2006-07 Focus except wagon Lowers vehicle approximately 1.5" Includes front and rear springs • Improves handling • Includes front dampers with mounts, spring seats and rear dampers SVT FOCUS SUSPENSION KIT M-3000-ZX3 ESCORT ZX2 TOKICO STRUT KIT M-18000-Z2 • • • • • Heavy-duty Tokico struts performance tuned to match M-5560-Z2 Eibach® spring kit for ZX2 suspension. Provides improved body control with a firmer ride. Kit includes front and rear struts. 188 Fits 2000-05 ZX3, ZX4 and ZX5 Focus Original equipment on SVT Focus Upgrades your stock Focus suspension to SVT Focus Improved handling characteristics without ride degradation Reduced ride height approximately .5" Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. BRAKES FOCUS RS BRAKE AND SUSPENSION KIT M-2300-RS* • Derived from Focus RS, this kit fits 2000-04 ZX3/4/5 manual transmission only • Requires factory ABS • Requires RS body kit or equivalent to provide adequate tire/wheel assembly clearance • Kit requires calipers be purchased separately • Caliper kit M-2300-B requires minimum 18" wheel; M-2320-F, M-2320-AF, and M-2320-C require minimum 17" wheel • Kit includes springs, dampers, front knuckles, front hubs, rear spindles, half shaft assemblies, 12.75" front rotors, 11" rear rotors, rear calipers, mounting hardware and instructions • Front hubs, front knuckles and rear spindles have increased stiffness and bearing size over production • Kit increases stopping power approximately 10% with Cobra type calipers, 15% with RS/Brembo® calipers FOCUS COMPETITION RALLY BRAKE KIT M-2300-ZX3R* • Similar to M-2300-ZX3 except different sized rotors for OEM 15" wheels • Complete kit to put larger disc brakes on 2000-04 ZX3/4/5 Focus • Includes 280 x 25 mm vented front rotors and 280 mm solid rear rotors • Includes all calipers and mounting hardware • Includes front and rear knuckles CHASSIS COMPONENTS SVT FOCUS BRAKE KIT M-2300-ZX3* • Complete kit to put SVT Focus brakes on 2000-04 ZX3/4/5 Focus • Includes 300 mm front rotors and 280 mm rear rotors • Includes all calipers and mounting hardware • Includes front and rear knuckles *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 189 ENGINE COMPONENTS FOCUS ZETEC SUPERCHARGER KIT M-6066-ZX3BB* • Designed in conjunction with Jackson Racing exclusively for Ford Racing Performance Parts • Uses Ford calibration and electronics, no fuel or electronics add-ons • Includes new air meter, injectors, air box, calibration, intake manifold, supercharger and belt • All installation hardware included • Revised calibration and Roots style blower results in instant response and a flat torque curve • Requires shipping of stock PCM for reflash • Increases power by approximately 45 hp and 45 lb-ft AT THE WHEELS! • Includes all components in Big Boost Kit M-9000-ZX3 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only SVT BOOST UPGRADE FOR JACKSON RACING SUPERCHARGER M-9000-SVTF* • For use with M-6066-20SVT to increase boost • Kit includes processor reflash, new pulley, serpentine belt and 42 lb. injectors • Stock processor must be shipped for reflash • Ford calibration ensures instant throttle response and a flatter torque curve • Produces approximately 10 psi of boost • Works on all 2002-04 SVT Focus models BOOST UPGRADE FOR JACKSON RACING SUPERCHARGER KIT M-9000-ZX3* • For use with M-6066-ZX3 to increase boost • Kit includes processor reflash, airbox and snorkel, new pulley, serpentine belt, and 30 lb. injectors • Stock processor must be shipped for reflash • Ford calibration ensures instant throttle response and a flatter torque curve • Produces approximately 10 psi of boost FOCUS PERFORMANCE AIRBOX AND SNORKEL M-9659-SVTF** • • • • SVT Focus airbox and snorkel kit Fits any model year Focus equipped with 2.0L Zetec engine Increased airflow over stock non-SVT airbox Insulates incoming air charge from under hood—heat more efficiently than the open element design • MAF sensor not included 190 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. FOCUS ZX3 2.0L ZETEC CNC’D ALUMINUM HEAD M-6049-ZX3P* Assembled Head CNC PORTED 2.3L DURATEC CYLINDER HEAD M-6049-D23P* • Fits 2000-04 Focus ZX3 2.0L • CNC’d for flow improvement and includes 3-angle valve job • Cast from prime 319 aluminum • Assembled with 21-4N stainless steel intake and exhaust valves, production valve springs and retainers (tappets, cams and cam seals not included) • Intake valve diameter: 33 mm, Exhaust valve diameter: 30 mm • Chamber volume 47.7 cc (nominal) • Bare head weighs 28.3 lbs. • Production intake and exhaust manifolds bolt on • High-Flow Duratec cylinder head casting from 2.3L Duratec engine • CNC porting increases flow approximately 15% on intake and exhaust • Accepts stock valvetrain • Fits 2003-06 Focus with 2.0L/2.3L Duratec engine • Valves, springs and retainers installed; no cams TYPICAL AIRFLOW (@ 28" OF H20 DEPRESSION) AS DELIVERED INTAKE FLOW (SCFM) EXHAUST FLOW (SCFM) .050 .100 .150 .200 .250 .300 .350 .400 .550 38.0 80.7 119.1 153.7 181.0 193.0 204.8 214.0 220.3 32.8 74.9 109.1 144.6 167.9 186.0 188.5 193.1 195.2 2.0L ZETEC INTAKE AND EXHAUST VALVES ZETEC HIGH LIFT VALVESPRING SET M-6513-ZX3E* • • • • Springs will work with most cams up to .450" lift Works with most high lift aftermarket Zetec cams Can be changed on vehicle, NO MACHINING REQUIRED Includes valve springs and retainers ENGINE COMPONENTS LIFT Swirl polished, 21.4N premium stainless steel intake and exhaust valves for high-performance cylinder head applications. Requires cylinder head to be modified to accept bigger valves; will not work in production heads. M-6505-ZX3* Exhaust Valve • Service replacement for the CNC’d Ford Racing Zetec cylinder head M-6049-ZX3P • 30 mm diameter M-6507-ZX3* Intake Valve • Service replacement for the CNC’d Ford Racing Zetec cylinder head M-6049-ZX3P • 33 mm diameter ZETEC 4-CYLINDER DOHC 2.0L 16V STREET PERFORMANCE CAMSHAFTS M-6252-A203* • • • • Radical Street/Strip profile Manual transmission with headers CNC ported head with port matched intake Increased compression recommended: 10.5:1-12.0:1 • Excellent power naturally aspirated PLUS super nitrous cam or with supercharger • RPM range: 3,000-8,000 DURATION ADVERTISED VALVE LIFT @ .050" DURATION INT. EXT. INT. EXT. INT. EXT. 9.9 mm 9.9 mm 218° 218° 240° 240° (.390") (.390") LOBE SEPARATION 110° *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 191 ENGINE COMPONENTS 2.0L ZETEC ADJUSTABLE CAMSHAFT GEAR M-6256-Z20* Fits ZX2, ZX3 and PERFORMANCE ZETEC INTAKE MANIFOLD M-9424-ZX3R* Escape (one per pack) 2.0L Zetec adjustable camshaft gear provides +/-10 degrees change in camshaft timing. Lightweight aluminum design. Hard anodized outer half for long life. Blue anodized inner half with Ford logo. Stainless steel bolts and washers included. Bolt-on installation when used on intake and/or exhaust cam of Focus ZX3 and Escape 2.0L Zetec engine and intake cam of Escort ZX2 2.0L Zetec engine. Requires use of cam gear adapter when used on exhaust cam of Escort ZX2 2.0L Zetec engine. A must for any 2.0L camshaft work. • Inspired by the intake on the FR200 show car • Bolts in to stock location with all fittings and EGR • Requires M-9926-ZX3R throttle body • Increased flow makes this the best manifold on the market for forced induction or high-revving Zetec engines • Fits 2000-04 2.0L Zetec equipped ZX3/4/5/W SVT FOCUS FRONT FASCIA M-17831-F** 70MM THROTTLE BODY FOR PERFORMANCE ZETEC INTAKE MANIFOLD M-9926-ZX3R* • Fits all 2000-04 Focus ZX3 and ZX5 • Complete with driving lights, lower grill insert, lower valance, side marker lights and SVT horn • Must be painted to match color of car • Original equipment on the 2003 SVT Focus Designed to be used with performance manifold M-9424-ZX3R. SPEC FOCUS: ROAD RACING SVT FOCUS REAR FASCIA M-17835-F** • • • • 192 Fits 2000-05 Focus ZX3 and ZX5 Complete with honeycomb insert Must be painted to match color of car Original equipment on the 2003 SVT Focus Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. Muscle Mustangs & Fast Fords “Project Stocker” Kuntz & Co.-built 302 engine producing 415 hp @ 6,200 rpm FORD RACING PERFORMANCE PARTS USED: FRPP Sportsman Block GT-40 Iron Heads w/FRPP FRPP FRPP FRPP FRPP FRPP FRPP Cobra 1.7:1 Roller Rockers Cobra Intake w/65 mm Throttle Body Hydraulic Roller Lifters EPEC Computer System Ignition Wires 24# Fuel Injectors 5.14 Ring and Pinion Evan Smith 1993 Cobra Mustang built for NHRA Stock Eliminator Best ET: 10.78 @ 122.23 mph Race weight: 2,980 lbs w/driver *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 193 TRUCK PERFORMANCE 2004 F-150 SUPERCHARGER KIT M-6066-F104 Black Wrinkle Finish M-6066-F104P Polished Finish 2005-07 F-150 SUPERCHARGER KIT M-6066-F105 Black Wrinkle Finish M-6066-F105P Polished Finish • • • • • • • • • • • • • • Fits all 2004 F-150 with 5.4L 3-valve engine Complete kit contains all hardware and detailed instructions Intercooled system Premium fuel only Designed for use with factory throttle body 95 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Simple bolt-on rear wheel increase of approximately 160 horsepower and 160 lb-ft of torque • Installation of this kit will void your new vehicle powertrain warranty • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days for assembly Fits all 2005-07 F-150 with 5.4L 3-valve engine Complete kit contains all hardware and detailed instructions Intercooled system Premium fuel only Designed for use with factory throttle body 95 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Simple bolt-on rear wheel increase of approximately 160 horsepower and 160 lb-ft of torque • Installation of this kit will void your new vehicle powertrain warranty • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Due to calibration complexity this supercharger will not fit 2007-08 Expedition or the 2008 F-150 NOTE: Superchargers are built to order. Please allow 7 days for assembly M-6066-F105P shown M-6066-F104P shown 1999-00 LIGHTNING SUPERCHARGER UPGRADE KIT M-6066-L90 Black Wrinkle Finish M-6066-L90P Polished Finish 2001-04 LIGHTNING SUPERCHARGER UPGRADE KIT M-6066-LR Black Wrinkle Finish M-6066-LRP Polished Finish • • • • • • • • • • • Fits 1999-2000 F-150 Lightning Complete kit contains all hardware and detailed instructions Premium fuel only Designed for use with factory twin bore throttle body 90 mm mass air meter DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Simple bolt-on increase of approximately 80 horsepower and 80 lb-ft of torque • Installation of this kit will void your new vehicle powertrain warranty • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days M-6066-L90P shown for assembly Fits 2001-04 F-150 Lightning Complete kit contains all hardware and detailed instructions Premium fuel only Designed for use with factory twin bore throttle body DUE TO MULTIPLE CALIBRATIONS, ONLINE REGISTRATION IS REQUIRED TO RECEIVE PRO-CAL TOOL AFTER PURCHASE • Pro-Cal tool voucher included with kit • Simple bolt-on increase of approximately 80 horsepower and 80 lb-ft of torque • Installation of this kit will void your new vehicle powertrain warranty • E.O. #D-231-24 • Engine calibrations are developed and supported for U.S. and Canadian vehicles only NOTE: Superchargers are built to order. Please allow 7 days M-6066-LRP shown for assembly EXPEDITION SUPERCHARGER CONVERSION KIT M-6066-E05 • This conversion kit is required to install M-6066-F105 supercharger on 2005-06 Expeditions with 5.4L 3V engine • Separate purchase of the M-6066-F105 supercharger kit is required • See M-6066-F105 for additional details • Premium fuel required • E.O. #D-231-24 194 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 2004-08 F-150 LIGHTNING WHEEL M-1007-L2010* • • • • • • • • • Ford Racing exclusive. Proposed wheel for never produced Lightning Fits all 2004-08 F-150 4WD only Does not fit 2004 F-150 Heritage Sparkle silver painted finish, with machined face 6-lug, 135 mm bolt circle 7.125" backspacing 44 mm offset 20" x 10" wide Includes Ford Racing center cap 2004-08 F-150 LIGHTNING WHEEL M-1007-L2010P* • Ford Racing exclusive. Proposed wheel for never produced Lightning • Fits all 2004-08 F-150 4WD only • Does not fit 2004 F-150 Heritage • Polished aluminum finish, with machined face • 6-lug, 135 mm bolt circle • 7.125" backspacing • 44 mm offset • 20" x 10" wide • Includes Ford Racing center cap 2004-08 F-150 LIGHTNING WHEEL M-1007-L2085* 2004-08 F-150 LIGHTNING WHEEL M-1007-L2085P* • Ford Racing exclusive. Styled after proposed wheel for never produced Lightning • Fits all 2004-08 F-150 2WD and 4WD • Fits 2002-08 Expeditions • Does not fit 2004 F-150 Heritage • Sparkle silver painted finish, with machined face • 6-lug, 135 mm bolt circle • 6.56" backspacing • 44 mm offset • 20" x 8.5" wide • Includes Ford Racing center cap • Ford Racing exclusive. Styled after proposed wheel for never produced Lightning • Fits all 2004-08 F-150 2WD and 4WD • Fits 2002-08 Expeditions • Does not fit 2004 F-150 Heritage • Polished aluminum finish, with machined face • 6-lug, 135 mm bolt circle • 6.56" backspacing • 44 mm offset • 20" x 8.5" wide • Includes Ford Racing center cap F-250 HARLEY-DAVIDSON WHEEL M-1007-A208* FORD SUPER DUTY DANA SUPER 60 FRONT AXLE 4.30 RATIO M-3002-F4430* • • • • • • • Fits all 2005 F-250/F-350 non dual wheel 4X2 trucks 8-lug, 170 mm bolt circle 5.80" backspacing 40 mm offset 20" x 8" wide Includes center cap Fits 2005 F-250/F-350 • • • • • • • Complete axle from rotor to rotor 4.30:1 gear ratio 10-lug wheel bolt pattern Featured on F-450 and F-550 Perfect off-road upgrade Extra heavy duty Calipers not included FORD SUPER DUTY DANA SUPER 60 FRONT AXLE 4.88 RATIO M-3002-F4488* • • • • • • • *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. Complete axle from rotor to rotor 4.88:1 gear ratio 10-lug wheel bolt pattern Featured on F-450 and F-550 Perfect off-road upgrade Extra heavy duty Calipers not included www.fordracingparts.com 195 TRUCK PERFORMANCE F-250/350 DIESEL EXHAUST SYSTEMS M-5230-73L* 1998-04 F-250/350 with 7.3L diesel, 2WD and 4WD 2003-05 F-250/350 with 6.0L diesel, 2WD and 4WD Made of high-quality T-304 stainless steel 4" diameter Additional lengths to fit all wheelbases included Unique tips M-5230-6L* • • • • F-150 LIGHTNING STYLE EXHAUST SYSTEM M-5230-L* • Fits 2004-05 F-150 2WD (will not fit 2004 Heritage or Lightning models) • SVT Lightning inspired styling • Unique tips • Made of high-quality T-304 stainless steel • Additional lengths to fit all wheelbases included in the kit F-150 LIGHTNING STYLE EXHAUST SYSTEM M-5230-L3* • Fits 1998-03 F-150 and 2004 F-150 Heritage 2WD • Side exit exhaust • Unique tips • Made of high-quality T-304 stainless steel • SVT Lightning inspired styling • Additional lengths included to fit all wheelbases • Will not fit F-150 Harley-Davidson F-150 SPLIT REAR EXHAUST SYSTEM M-5230-SR* • Fits 2004-07 NEW F-150 2WD and 4WD, Super Crew with short bed • Made of high-quality T-304 stainless steel • 4.6L and 5.4L compatible • Unique polished tips with Ford Racing logo • Will not fit 2004 F-150 Heritage F-150 LIGHTNING EXHAUST SYSTEM M-5230-L2* • Replacement for 1999-04 Lightning • Side exit exhaust • Made of high-quality T-304 stainless steel • Unique tips F-150 LIGHTNING STYLE EXHAUST M-5230-L06EC* • • • • Fits 2006-08 F-150 2WD SVT Lightning inspired styling Unique tips Made of high-quality T-304 stainless steel • Fits extended cab and crew cab F-150 HARLEY-DAVIDSON SPLIT REAR EXHAUST SYSTEM M-5230-HDSR* • Fits 2001-03 F-150 Harley-Davidson pickup • Made of high-quality T-304 stainless steel • Unique tips 196 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. STAINLESS STEEL “SHORTY” HEADERS PART NUMBER TYPE APPLICATION Tube Diameter M-9430-T50* Stainless Steel 1.625" M-9430-T58* Stainless Steel M-9430-F542* M-9430-F542C* M-9430-F543* M-9430-SD682* M-9430-SD682C* M-9430-SD683* M-9430-SD683C* Stainless Steel Ceramic Coated Stainless Steel Stainless Steel Ceramic Coated Stainless Steel Ceramic Coated 1990-95 F-Series Truck and E-Series Van with 5.0L engine ➁ 1990-96 F-Series Truck and E-Series Van with 5.8L engine ➁ 1999-03 F-150 5.4L 2V 1999-03 F-150 5.4L 2V ➀ 2004-05 F-150 5.4L 3V 2004 F-250 6.8L V10 2V 2004 F-250 6.8L V10 2V ➀ 2005 F-250 6.8L V10 3V 2005 F-250 6.8L V10 3V ➀ 1.625" 1.625" 1.625" 1.625" 1.625" 1.625" 1.625" 1.625" NOTES: ➀ Jet-Hot® Lifetime Warranty JET-HOT® LIMITED WARRANTY ➁ Production and This limited warranty becomes void if the product shows evidence of bending or mutilating of parts or burnout resulting from improper tuning. Warranty covers GT-40 heads rust-through only and does not cover cosmetic rust or discoloration of material. This limited warranty shall be limited to the repair, adjustment or replacement of defective parts only. Does not cover any labor claims. Ask your dealer for a copy of this “Jet-Hot” limited warranty. 2004-06 F-150 HIGHPERFORMANCE RADIATOR M-8005-P221* • • • • • All aluminum construction Recommended for high-performance applications Thermally efficient up to 700 horsepower Uses OEM fan and mounting points Will not fit 2004 F-150 Heritage F-150 LIGHTNING DUAL FUEL PUMP KIT M-9407-L54 • Dual 130 liters per hour fuel pumps from the 1999-2004 Lightning • Fits 1996-2004 F-150 models with PN96 body • Kit includes jumper wire for non Lightning applications FEATURES: STAINLESS STEEL M-9430-SD683 shown 409 stainless exhaust material is titanium stabilized ferritic stainless steel. 409 stainless is used in applications where appearance is a secondary consideration to properties and corrosion resistance and where some weldability is required. An example of stainless usage is catalytic converter assemblies. 409 stainless has excellent forming characteristics and is rust-through resistant. A surface rust will form in most instances. This rust retards further corrosion. • • • • 409 stainless steel tubes Machined flange Bolts to stock exhaust pipes Includes gaskets, bolts and studs CERAMIC COATED STAINLESS STEEL • Identical to stainless steel header, but with Jet-Hot® ceramic finish • Stain and rust resistant • Super-premium quality • Lifetime Warranty • Finest short-tube headers you can buy ALUMINUM TRANSMISSION PAN M-7195-T E40D/4R100 Deep Sump • Cast aluminum transmission pan with cooling fins and Ford Racing logo cast in the bottom • Pan holds approximately 2 quarts additional ATF • Kit includes mounting hardware • Filter and pan gasket not included ELECTRIC WATER PUMP M-8501-L54** • Production 2003 F-150 Lightning intercooler coolant circulation pump • Inlet and outlet hose connection diameter is 19 mm/3/4" • Can be used in many coolant pumping applications *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 197 TRUCK PERFORMANCE AXLE GIRDLE M-4033-G1 8.8" Ford 8.8" DIFFERENTIALS • Lightweight 356T6 aluminum casting replaces rear cover on 8.8" • Load bolts provide additional support for differential bearing caps • Increase ring and pinion gear life NOTE: Check exterior clearance to chassis/suspension. NOTE: Will not fit 2005 Mustang M-4204-F318 shown PART NUMBER AXLE SPLINE DESCRIPTION M-4204-F318 ➀➁ M-4204-P31 ➀➁➃ M-4204-T31 ➂ NOTES: 8.8" 31 spline Traction-Lok 8.8" 31 spline Auburn Pro 2 8.8" 31 spline T2 Torsen Differential ➀ Will accept anti-lock exciter ring. ➁ Requires 4 ounces of CM-19546-A1 friction modifier with initial fill. ➂ M-4204-T28 fits 1999 Cobra/Thunderbird/Mark VIII with IRS (2001-04 Cobra has 31 spline). ➃ Recommended for street use only. 10.25"/8.8" RING GEAR AND PINION SETS PART NUMBER RATIO AXLE M-4209-F308* M-4209-F327* M-4209-G355A* M-4209-F373N* M-4209-G410A* M-4209-G410M* M-4209-G430M* M-4209-G456* 3.08:1 3.27:1 3.55:1 3.73:1 ➁ 4.10:1 4.10:1 4.30:1 4.56:1 8.8" 8.8" 8.8" 8.8" 8.8" 8.8" 8.8" 8.8" PART NUMBER RATIO AXLE NOTES: ➀ These ring and pinions have been developed to increase towing capability of 5.4L Expeditions. ➁ Replaces our popular M-4209-F373. New manufacturing technology utilizing a Face Hob Process which features a single-pass pinion tooth machining operation compared to a conventional three-pass process for machining. CNC cut and lapped gear teeth. Higher strength and better quality gears are produced with the Face Hob Process. NOTE: These new gears look a little different; the gear teeth are cut on a different angle and the ring gear has a bevel on the back of the gear. MUSTANG/RANGER/F-150 5.4L F-150, EXPEDITION, NAVIGATOR, F-250/350 ➀ M-4209-K410M* 4.10:1 10.25" (rear) M-4209-K456M* 4.56:1 10.25" (rear) 9.75" “TRUE TRAC” LIMITED SLIP DIFFERENTIAL M-4204-TT31 STERLING AXLE “TRUE TRAC” LIMITED SLIP DIFFERENTIAL M-4204-TT312 • Torque-sensing differential applies torque to wheel with best traction • Refined enough for street use, stout enough for rigorous off-road duty • 34 spline count fits all 9.75" axles to 2006 • Torque-sensing differential applies torque to wheel with best traction • Refined enough for street use, stout enough for rigorous off-road duty • 35 spline fits all Sterling axle 10.25" and 10.5" gears 198 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. LIGHTNING LOWERING KIT M-3000-L LOWERING KIT, 1997-03 F-150, 2WD M-3000-T1 This kit lowers all 1999-04 F-150 Lightning/F-150 Harley-Davidson models 30 mm (1.181") in all four corners. A simple front coil/jounce bumper replacement and rear shackle replacement are the only items necessary to enhance positive control. Both vehicles retain very good ride/launch characteristics. This kit lowers 1997-03 F-150 standard cab, SuperCab and SuperCrew with V-6 or V-8, approx. 2" front and 4" rear. Includes new front coil springs, rear shackles and hangers and (4) specially tuned high-pressure gas shocks. Fits vehicles with V-6 or V-8 engines in standard cab (long and short bed) and SuperCab (short bed). Improves appearance and handling with very acceptable ride characteristics. NOTE: Not recommended for 1999-03 SVT F-150 Lightning. When used on 2001 SuperCab with 6' box and 5" dia. driveshaft; the driveshaft may hit the crossmember on hard bumps. 2WD only. 2004-07 2WD F-150 LOWERING KIT M-3000-T3 2004-06 F-150 REAR LOWERING KIT M-3000-G • Lowers rear of vehicle • 2" drop • Contains all installation hardware • Lowers truck 2" in the front, 5" in the back • Includes front drop coil springs, rear flip kit, rear shocks, bump stops and hardware • Fits all 2WD models • Lowers vehicle roll center for better handling • Does not fit 2004 F-150 Heritage Kelly Doyle’s 2004 F-150 shorttracktrucks.com and Fast Trucks series *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 199 CHASSIS COMPONENTS FORD RACING PERFORMANCE PARTS USED: FRPP Sportsman Block FRPP GT40P Heads FRPP Camshaft FRPP Roller Rockers STYLE FORD RACING 2005-07 F-250 FLOOR MATS M-13086-F 2005-07 F-250 • • • • F-150 BILLET ALUMINUM GRILL INSERTS M-7843-A Ford Oval Logo • • • • • Constructed with 18 oz nylon with PVC backing Factory style anti-slide hook hole and bottom grip knobs Black mats with 3 color Ford Racing logo Kit contains 1 pair front floor mats Fits F-150 1996-03 and 2004 Heritage Can be used as a grill or tailgate insert 7.25" wide Polished aluminum with painted logo Includes mounting hardware EFI TRUCK VALVE COVERS M-6582-A351R** Black Satin • Fits 5.0L EFI and 5.8L EFI engines • Die-cast aluminum with raised “Ford Racing” logo • Includes chrome oil filler tube and cap NOTE: Find more valve covers on pages 79, 127-130 COATED 3-VALVE CAM COVERS 4.6L/5.4L M-6582-C543V Powdercoated for chrome appearance M-6582-3VB Blue M-6582-3VBLK Black Wrinkle M-6582-3VS Silver • Fits 2005-08 3-valve 4.6/5.4L engines • Powdercoated finish F-150 ENTRY GUARD M-13208-F100 • • • • 200 Fits 2004-07 F-150 Extended cab Improves appearance and protects vehicle entry area Made of stainless steel with a “Ford Racing” logo Kit includes two guards, installation tape and instructions Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. F-150 LIGHTNING HEADLIGHTS M-13006-L03 Sold in pairs F-150 LIGHTNING PARKING LAMPS M-13200-L02 Sold in pairs • Original equipment 2003 SVT F-150 Lightning • Fits 1997-03 F-150 and 2004 F-150 Heritage model • Clear crystalline lenses are marked with thin horizontal lines which accentuate the shape of the light’s exterior surface • Requires parking lamps M-13200-L02 sold separately • • • • F-150 LIGHTNING TAIL LAMPS M-13404-L01 Sold in pairs LIGHTNING MASS AIR METER M-12579-L54** • Original equipment on 2003 SVT F-150 Lightning • Fits 2000-03 F-150 Flareside and Flareside SuperCrew only • Clear crystalline lenses are marked with thin horizontal lines which draw the eye to the light’s exterior plane rather than its reflector and bulb • Stock replacement 90 mm 2001-04 F-150 Lightning Mass Air Meter • Requires recalibration for use on other vehicles HARLEY-DAVIDSON BOOST GAUGE M-11620-H200 2004-2006 F-150 BILLET FORD OVAL LOGO M-7843-C • Designed for 2002-03 Limited Edition Supercharged Harley-Davidson F-150 • 30" HG-Vac./20 psi boost • Includes all necessary installation hardware and instructions • Gauge face similar to Harley-Davidson gauge faces with Ford Racing logo • Mounts on steering column • • • • Original equipment on 2003 SVT F-150 Lightning Fits 1997-03 F-150 and 2004 F-150 Heritage model Requires headlights M-13006-L03 sold separately Clear crystalline lenses are marked with thin horizontal lines which accentuate the shape of the light’s exterior surface Fits 2004-06 F-150 9" long, machined from billet aluminum Polished with red and blue paint Will not fit 2004 F-150 Heritage ALUMINUM FUEL DOOR M-2301-E 2001 Special Edition Mustang Aluminum Fuel Door • Original equipment on 2001 Special Edition Mustang • Manufactured by the OEM supplier, not a reproduction part • Fits 1999-04 Mustang • Fits 1997-03 F-150 with round fuel door • Fits 2000-05 Focus with modifications to the fuel filler neck plastic box • 6.250" diameter SUPER DUTY ENTRY GUARD SET M-132087-SD100 • Improves appearance and protects vehicle entry area • Made of stainless steel with a “Ford Racing” logo • Kit includes four guards, installation tape and instructions F-150 ALUMINUM FUEL DOOR M-2301-F150 • Improve the appearance of your 2004-07 F-150 • Brushed aluminum finish • Billet aircraft styling • Does not fit 2004 Heritage • Easy installation *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. www.fordracingparts.com 201 GENUINE FORD ACCESSORIES Rev up your ride with Genuine Ford Accessories Chrome Bug Shield 202 Techline (800) FORD788 Vehicle Security System Composite Hard Tonneau Cover New 20” Wheels Want to rule the road? Then, break away from the pack by personalizing your F-150 or Mustang with Genuine Ford Accessories. Designed and engineered by Ford for enduring quality and a precise fit, they empower your vehicle with comfort, convenience and cool. And check out Ford’s online Accessorizer. It shifts personalization into high gear, letting you see how Genuine Ford Accessories will look on your vehicle. Test drive it at: fordaccessoriesstore.com lincolnaccessories.com mercuryaccessories.com . . . We offer a complete line of accessories for all Ford, Lincoln and Mercury vehicles, backed by one of the industry’s strongest limited warranties. Find these and other great dealer-installed accessories exclusively at your Ford, Lincoln or Mercury Dealer. Racing Stripes Hood Scoop Shelby-Style Rear Spoiler 18” Chrome Aluminum Wheels www.fordracingparts.com 203 FORD RACING APPAREL AND ACCESSORIES MEN’S REEBOK® PLAY DRY ZIP FRONT POLO The men’s zip-front polo, made from 92/8 polyester/spandex jersey knit moisture wicking performance fabric with UV protection. Features silver underarm stripe, reflective heat transfer vector on left sleeve, zip-front pocket and exposed stitch detail. 60/40 cotton/polyester. Imported. Black. Sizes M-XXL. A. S77021 A. NAVY COTTON PIQUE GOLF SHIRT This men’s golf shirt keeps you cool, dry and comfortable with fabric that funnels moisture away from the body for quick evaporation. 43/57 polyester/cotton. Midnight Navy. Imported. Sizes S-XXL. B. S67021 KHAKI JACQUARD POLO This micro polyester twill performance golf polo with UV and moisture management properties features a two-color diagonal twill pattern and matching tipped collar and hemmed cuffs. Khaki. Imported. Sizes M-XXL. C. S67014 B. LADIES’ COTTON POLO WITH SNAP PLACKET Cotton baby rib short sleeve polo shirt with snap placket, ribbed collar, capped sleeves and twill tape on neck seam and side slits. Ford Racing logo embroidered on left sleeve. Imported. Black. Sizes S-XL. D. S77017 C. D. 204 Order toll free 1.888.380.6901 for apparel and accessories A. FORD RACING TEES All you need on race day or any day! Choose your favorite 100% cotton Ford Racing tee from classic logo, Pit Crew, the new side seam print and many others in your choice of design and color. Imported. Sizes M-XXL. A. S9819 Navy Racing B. S8016P White Racing C. S77114 Realtree® Camo D. S77025 Race Fan FORD RACING SATIN TWILL JACKET Men’s unlined satin twill jacket with front pockets, elastic cuffs and open bottom with elastic on side waistband. Imported. Black. Sizes M-XXL. E. S77037 B. MEN’S BLACK DRI DUCK® JACKET This lighweight soft shell waterproof jacket provides the ultimate in performance and warmth. Its 3-layer construction combines a rugged 4-way stretch exterior made with Teflon, a membrane film and soft inside micro-fleece, allowing moisture to escape for a breathable, comfortable fit. Includes 2 outside zipper hand pockets, roomy inside pockets and an inside storm flap. Imported. Black. Sizes M-XXL. F. S77023 C. E. D. F. Order toll free 1.888.380.6901 for apparel and accessories 205 FORD RACING APPAREL AND ACCESSORIES FORD RACING HEADWEAR Old favorites and new classics to suit any Ford Racing fan. These stylish caps are made of 100% cotton twill with adjustable backstrap closures. Imported. One size fits most. A. S47013 Wave B. S77001 Accelerant C. S77002 Reverb D. S77003 Kopped E. S77004 Vanned F. S77005 Realtree® Camo A. B. D. 206 C. E. F. Order toll free 1.888.380.6901 for apparel and accessories FORD RACING HEADWEAR You’ll always be noticed in these bright and flashy Ford Racing caps. 100% cotton twill with adjustable backstrap closures. Imported. One size fits most. A. S47010 Silver Flame B. S77031 Mossy Oak® Camo C. S67005 Khaki D. S67001 Flash E. S67007 Spike F. S57027 Racing Fire A. B. D. C. E. Order toll free 1.888.380.6901 for apparel and accessories F. 207 FORD RACING APPAREL AND ACCESSORIES FORD RACING HEADWEAR Old favorites and new classics to suit any Ford Racing fan. These stylish caps are made of 100% cotton twill with adjustable backstrap closures. Imported. One size fits most. A. S77002 Reverb B. S77113 Boss Is Back Cap C. S77105 Gray Tribal D. S57018 Yellow Wave E. S57019 Camouflage F. S67006 Blaze A. B. D. 208 C. E. F. Order toll free 1.888.380.6901 for apparel and accessories A. FORD RACING BARSTOOL – NO BACK REST A. S77107 B. FORD RACING BARSTOOL WITH BACK REST B. S77108 STAINLESS STEEL TRAVEL MUG 16-oz. stainless steel travel mug with a no slip bottom and slide lock opening. Not microwave or dishwasher safe. 7"H. C. S57037 CREEPER D. S77109 WORK STATION MAT Perfect in front of a drill press or any other work station where standing is a necessity. Made of durable, chemical resistant PVC material. Colors fully molded-in, will not fade or wear away. Easily cleans with soap and water. 19" x 30". E. S69063 FORD RACING CAMP CHAIR F. S77112 C. D. F. E. Order toll free 1.888.380.6901 for apparel and accessories 209 ENGINE DIMENSIONS BASIC ENGINE DIMENSIONS (INCHES) Out of Production Gasoline Engines DISPLACEMENT 1.6L Kent 1.6L CVH 1.9L CVH 1.9L CVH 1.8L ZETEC DOHC 2.0L CVH 2.0L OHC ➀ 2.0L OHC ➁ 2.0 ZETEC 2.0L V-6 2.2L Probe 2.3L OHC 2.5L OHC 2.3L HSC 2.5L HSC 2.5L V-6 Duratec 2.6L V-6 2.8L V-6 2.9L V-6 3.0L V-6 SHO 3.2L V-6 SHO 3.4L V-8 SHO 3.8L V-6 3.8L V-6 4.0L V-6 4.5L Ford Racing 200 I-6 250 I-6 240 I-6 300 I-6 221 V-8 255 V-8 260 V-8 289 302 302 BOSS 302 Ford Racing 351W 351W 351 Ford Racing 351 Ford Racing 351C * BOSS 351M 400 352 390 406 410 427 428 429 STD 429 STD 429 CJ/SCJ 429 BOSS (S) 429 BOSS (T) 460/460 Ford Racing ➀ ➁ ➂ ➃ ➄ ➆ ➇ 210 YEARS 1971-73 1981-85 1985-87 1988-96 1991-96 1997-98 1971-74 1983-87 1995-04 2001-04 1988-92 1974-97 1998 1984-94 1986-91 1995-99 1972-73 1974-80 1986-92 1989-95 1993-95 1996 1982-95 1997-03 1990-00 ➂ 1963-83 1969-80 1965-72 1965-96 1962-63 1979-82 1962-64 1963-68 1968-96 1969-70 ➂ 1969-70 1971-96 ➂ ➂ 1970-74 1975-85 1971-81 1960-66 1961-71 1962-63 1966-67 1963-68 1966-70 1968-73 1968-73 1969-70 1969 1969-70 1969-96 BORE 3.188 3.150 3.230 3.230 3.270 3.339 3.575 3.520 3.339 3.215 3.390 3.780 3.780 3.680 3.680 3.245 3.545 3.650 3.661 3.500 3.620 3.245 3.810 3.810 3.950 4.080 3.680 3.680 4.000 4.000 3.500 3.680 3.800 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.050 4.130 4.050 4.230 4.130 4.360 4.360 4.360 4.360 4.360 4.360 Car (EAO) Ranger/Bronco II Non-production blocks. Dimensions for reference. 3.8L SC #1-2-3 – 2.5190", #4 – 2.5096" Sport 2000 – 1.6395" 1997 – 5.482" 1997 – 1.181" Techline (800) FORD788 STROKE 3.056 3.130 3.465 3.465 3.350 3.465 3.029 3.126 3.465 2.631 3.700 3.126 3.401 3.300 3.583 3.130 2.630 2.700 2.835 3.150 3.150 3.130 3.390 3.390 3.320 3.500 3.126 3.910 3.180 3.980 2.870 3.000 2.870 2.870 3.000 3.000 3.000 3.500 3.500 3.500 3.500 3.500 3.500 4.000 3.500 3.780 3.780 3.980 3.780 3.980 3.590 3.590 3.590 3.590 3.590 3.850 BORE SPACING 3.78 3.614 3.614 3.614 3.583 3.614 4.016 4.173 3.614 4.016 3.810 4.173 4.173 4.080 4.080 4.016 4.760 4.760 4.760 4.330 4.330 4.016 4.193 4.193 4.760 4.469 4.080 4.080 4.480 4.480 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.380 4.630 4.630 4.630 4.630 4.630 4.630 4.900 4.900 4.900 4.900 4.900 4.900 MAIN JOURNAL DIA. 2.1253 2.383 2.383 2.383 1.966 2.383 2.244 2.399 2.283 2.479 2.360 2.399 2.399 2.249 2.249 2.480 2.244 2.244 2.244 2.516 2.516 2.480 2.5194 ➃ 2.519 2.244 2.749 2.249 2.399 2.399 2.399 2.249 2.249 2.249 2.249 2.249 2.249 2.249 3.000 3.000 2.749 2.249 2.749 3.000 3.000 2.749 2.749 2.749 2.749 2.749 2.749 3.000 3.000 3.000 3.000 3.000 3.000 ROD JOURNAL DIA. 1.9372 1.886 1.886 1.728 1.771 1.728 2.047 2.047 1.847 1.967 2.006 2.047 2.047 2.124 2.124 1.968 2.127 2.127 2.126 2.047 2.047 1.968 2.311 2.311 2.126 2.100 2.124 2.124 2.123 2.123 2.123 2.123 2.123 2.123 2.123 2.123 2.123 2.311 2.311 2.311 2.311 2.311 2.311 2.311 2.438 2.438 2.438 2.438 2.438 2.438 2.500 2.500 2.500 2.500 2.500 2.500 CON ROD LENGTH (MEAN) 4.928 5.195 5.195 5.195 5.230 5.195 4.982 5.205 5.3618 ➆ 5.686 6.200 5.205 5.457 5.457 5.990 5.437 — 5.140 5.140 5.780 5.780 5.437 5.914 6.091 5.748 6.088 4.715 5.880 6.795 6.210 5.155 5.155 5.155 5.155 5.090 5.150 5.150 5.956 5.956 5.956 5.780 5.780 6.580 6.580 6.540 6.489 6.489 6.489 6.489 6.489 6.605 6.605 6.605 6.549 6.605 6.605 DECK HEIGHT 8.2272 8.212 8.378 8.378 8.130 8.378 8.146 8.368 8.378 8.189 9.500 8.368 8.368 8.700 9.400 8.189 8.084 8.084 8.858 8.660 8.660 8.189 9.232 9.232 8.858 9.232 7.808 7.808 10.000 10.000 8.206 8.206 8.206 8.206 8.206 8.201-8.21 8.201-8.21 9.480 9.503 9.503 9.206 9.206 10.297 10.292-10.302 10.170 10.170 10.170 10.170 10.170 10.170 10.300 (1968-70) 10.310 (19701⁄2-71) 10.322 (1972-73) 10.300 10.300 10.322 (1972-96) PISTON COMP HT — 1.451 1.451 1.451 1.108 1.451 1.595 ➄ 1.583 1.3012 ➇ 1.181 1.450 1.583 1.211 1.520 1.579 1.181 1.546 1.539 1.461 1.307 1.307 1.181 1.602 1.450 1.442 ➂ 1.511 — 1.605 1.757 1.595 1.600 1.600 1.605 1.605 1.530 ➂ 1.769 1.769 ➂ ➂ 1.647 1.947 1.647 1.825 1.775 1.745 1.674 1.752 1.674 1.890 1.890 1.890 1.926 1.870 1.756 NOTES: • All 4-cylinder (except 1.6L Kent) and all V-6 engines are metric. Dimensions shown in inches. • 3.9L V-8 used in the Thunderbird & Lincoln LS is based on the Jaguar V8 design. • 6.0L V-8, 6.4L V-8 and 7.3L V-8 – ITEC Powerstroke *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. 4-CYLINDER ENGINES 1.6L KENT/1.6L/1.9L CVH/2.0L/2.3L OHC/2.3L/2.5L HSC 1.6L “KENT” ENGINE This is a proven overhead valve design. The combustion face of the head is virtually flat. Most of the combustion chamber is in a dished piston. Camshafts are mechanical with solid tappets. Parts for this engine are identified as 1.6L Kent. You’ll find it under the hood of many Ford models, including Pinto, Capri, Fiesta and the English-built Cortina. A “GT” performance version is the basis for an amateur class of racing…Formula Ford. Only production-type parts are normally legal in “formula” competition. Check with your racing association for the latest rules. 1.6L “CVH” AND 1.9L “CVH” ENGINES 1.6L/1.9L CVH 2.3L OHC (Turbo-Intercooled) 2.3L/2.5L HSC 2.0L OHC The 1.6L CVH engine was introduced in 1981 for the Escort, Lynx, EXP and LN7 car line. Parts for this engine are identified as 1.6L CVH. It has a canted valve head (CVH) with the valve angles to match the hemispherical combustion chambers. Reliefs are cut into its domed pistons to match valve and combustion chamber configuration. A hydraulic camshaft is used in production. A performance version was introduced in 1984 with electronic fuel injection and a turbocharger. A 1.9L CVH was introduced on 19851⁄2 models. It has a 4.250mm higher deck height to achieve a longer stroke. Some 1.6L/1.9L CVH parts are interchangeable. 1.6L/1.8L/2.0L DOHC ENGINE Ford currently offers four double overhead cam (DOHC) 4-cylinder engines. The 1.6L DOHC was introduced on 1991 Capri, the 1.8L DOHC on 1991 Escort GT/Tracer LTS, a 2.0L DOHC on 1993 Probe, and a second 2.0L DOHC design on the 1995 Contour/Mystique. These engines feature four valves per cylinder and a centrally located spark plug in a “pentroof” combustion chamber for efficient air flow and combustion. Ford Racing parts have not been developed for these production double overhead cam engines. 2.0L/2.3L/2.3L OHC ENGINES Design-wise, these metric engines are very similar and have a belt-driven overhead camshaft. Dimensionally, however, they are very different in terms of bore, stroke, bore spacing, block deck height and crankshaft journal diameters. The European (EAO) 2.0L was produced in 1971-74 cars. The 2.3L OHC is widely found on 1974-95 models…including a high-tech version that powered the Thunderbird/Cougar Turbo Coupe. A two spark plug per cylinder design with distributorless ignition was introduced on 1989 Ranger and 1991 Mustang models. Parts for Ford Racing offers parts for five different 4-cylinder engines. Each is a unique design, and none of the major components can be interchanged between engines. Be sure to correctly identify your engine before ordering parts. these engines are identified as 2.0L EAO and 2.3L OHC respectively. In 1983, a 2.0L version of the 2.3L OHC engine was introduced on Ranger and Aerostar trucks. The only basic difference is in bore diameter, as shown in the chart on page 200, thus most parts interchange. Parts shown for the 2.3L OHC can be used in the 2.0L truck engine, except those relating to bore diameter (pistons, etc.). In 1998 the Ranger engine grows to 2.5L with increased stroke. 2.2L PROBE ENGINE Ford introduced a new fuel injected 2.2L engine (in naturally aspirated and turbo versions) for 1989 Probe models. It’s an overhead camshaft design with shaft-mounted rocker arms and three valves per cylinder (2 intake, 1 exhaust). The cylinder head is cast from aluminum and features dome-shaped combustion chambers *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. with dual squish areas and centrally located spark plug for fast burn combustion. Parts are not interchangeable with other 4-cylinder engines. Ford Racing parts have not yet been developed for the 2.2L engine. 2.3L/2.5L “HSC” ENGINES The 2.3L HSC was introduced in 1984 Tempo/Topaz models. Except for displacement, it bears no resemblance to the 2.3L OHC. The 2.3L HSC is a conventional cam-in-block in-line design—much like a 6-cylinder with two bores chopped off. HSC refers to its swirl combustion chamber that’s achieved by shrouding the valves and other minor head work. In 1986, a larger displacement (8mm longer stroke) 2.5L HSC was introduced, with electronic fuel injection. www.fordracingparts.com 211 SMALL BLOCK V-8 ENGINES 289/302/351W/351C/351M/400 SIX WAYS TO BUILD A WINNER Ford has manufactured millions of small block V-8s over the past 30 years, and Ford Racing parts are available for many of them. You have a choice of six engines to modify (eight, if you count two high-performance BOSS versions). So, you’ve got great flexibility working for you, whether you begin with a complete engine assembly or a bare block. All have four-inch bores, but there are differences that affect parts interchange. For example, the water passages described on page 213. Here’s a brief description of Ford small blocks. 289 Hi-Per 302 BOSS 351W 5.0L H.O. (SEFI) 289/302 The 289 was produced from 1963 through 1968, and the 302 from 1968 to the current model year. They’re very similar, except for stroke. Of special interest is the 289-4V Hi-Performance engine (1963-67) with mechanical camshaft, threaded rocker arm stud (adjustable) and a recessed spring seat. Most other 289/302 (1968-76) engines use a press-in stud. 1978 and later 302 engines use a modified pedestal as shown on page 209. Many 289/302 parts fit earlier 221/260 engines (which had smaller bores). They also had less metal around the bores, so you can’t overbore to come up with a 289. The 1985 model Mustang GT introduced a new high-output 302 with roller tappet camshaft. Electronic fuel injection was added in 1986. 302 BOSS This is certainly one of Ford’s all-time super engines. The 302 BOSS (1969-70) proved to be very competitive in 5 liter TransAm racing. It featured big breathing heads with canted valves, mechanical cam, stamped rocker arms with a threaded adjustable stud, push rod guide plates, forged crankshaft, 4-bolt main caps (#2, #3 and #4 journals), beefy con rod with spot-face for .375" bolt and forged pistons. 351W (WINDSOR) The Windsor engine plant builds this engine; hence the name. Normally, this isn’t important. But another engine, the 351C (for Cleveland engine plant), has the same displacement. That’s about all they have in common. So, it’s always important to differentiate between the two. The 351W is a beefier block than the 289/302, but has the same bore spacing (4.38") and bore diameter (4.00"), so heads retrofit. A higher deck height requires a unique intake manifold. Main journals (3.00") are larger than the 289/302 (2.25"). Camshafts interchange, but the 351W has a different firing order: (1-3-7-2-6-5-4-8) vs. (1-5-4-2-6-3-7-8) for the 289/302, except 1982 and later 302 HO which use the 351W firing order. The 351W has been used from 1969 to the current year. 212 Techline (800) FORD788 MODULAR V-8 ENGINES 4.6L SOHC, 4.6L DOHC, 5.4L SOHC In 1991, Ford unleashed a new era of muscle, one that is propelling us into the future. The Modular engine focuses on low friction, excellent sealing, and increased block stiffness. The design results in an extremely smooth running engine using aluminum heads and having all accessories rigidly mounted to the engine. Both the engine block and head are machined to close tolerances to produce a very precise assembly. The head bolts of modular engines actually extend past the cylinder bores into the bearing webs, eliminating bore distortion and providing a better head gasket seal. The sophisticated overhead cam design uses roller finger followers to lower friction and increase the RPM potential of the engine. On the bottom end, the deep skirt engine block and cross-bolted main caps contribute to a highly rigid assembly. Two engine plants manufacture Modular engines; Romeo produces all passenger car versions and Windsor produces the Modular Truck engines. Here’s a brief description of Modular V-8 engines. 4.6L SOHC The 4.6L SOHC (2V) was first introduced in 1991. This engine is the basis for all modular engines and is used in passenger cars as well as the trucks. The block is cast iron with a nodular crankshaft, while the heads are aluminum using an in-line valve design with 1 intake and 1 exhaust valve per cylinder. All passenger cars have press fit piston pins, while all truck engines have full floating piston pins to improve durability. 4.6L DOHC The 4.6L DOHC (4V) was first introduced in the Mark VIII; however, in 1996 a similar version of this engine found its calling: the Mustang Cobra. The aluminum block and four-valve head make for a powerful combination producing 305 HP @ 7000 RPM. Internally, the 4-bolt, cross-bolted main bearing caps provide the support necessary to easily handle the high RPM potential of the forged steel crankshaft. This engine uses hypereutectic pistons with full floating piston pins and upgraded connecting rod assemblies to improve durability. 5.4L SOHC The 5.4L SOHC (2V) “Triton” engine released in trucks for 1997 is producing favorable reactions. This engine has a cast iron block, forged steel crankshaft, full floating piston pins and special 6000 RPM connecting rods. It is the 5.8L pushrod engine replacement. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. SMALL BLOCK V-8 ENGINES 289/302/351W Water Passage 351C/351M/400 351C (CLEVELAND) The 351C entered the scene in 1970 and was produced until 1974. It has canted valves with multi-groove keepers, hydraulic cam, pedestal-mounted rocker arms with “sled” fulcrum seats that are retained with cap bolts. Heads for 2V induction have open chambers with rounded ports, while 4V heads have “quench” combustion chambers with larger rounded intake and exhaust ports. A 351C Cobra Jet appeared in 1971 with 4-bolt main caps, which was carried over in 1972 as the 351C-4V with open chamber heads. 351C BOSS The 351C BOSS also appeared in 1971. It had 4-bolt main caps and the 4V type quench chamber head with pedestals machined to accept a 302 BOSS type valve train and mechanical cam. The con rod featured a 180,000 psi .375" bolt. In 1972, open chamber heads were used with a flat-top piston, and the name changed to 351C HO. 351M (MODIFIED) AND 400 The 351M and 400 are similar in design to the 351C, but there are subtle differences. Both the 351M and 400 blocks are 1.100" taller and have larger main journal diameters. Engine mounts are unique. Bell housing pattern is the 429/460 design. WINDSOR VS. CLEVELAND WATER PASSAGES FORD RACING 302/351 “FORD RACING” ENGINE BLOCKS 289/302/351W engines use a front cover and water exits the intake manifold face of the cylinder head through the intake manifold to radiator. 351C/351M/400 engines do not use a front cover. The block is extended and covered with a flat stamping. Water exits the combustion face of the head and into the block, and then to the radiator. Windsor and Cleveland heads physically interchange, but some modification is required to accommodate the differences in water passages. See page 219 and above for details. Ford Racing has designed several “Ford Racing” blocks for maximum performance competition. They’re designed for small block engine builders who want to use existing 302/351C or 351W components. 302/351 Ford Racing engines constructed with Ford Racing block and Ford Racing cylinder heads are not available as complete assemblies. FORD RACING 302/351 FORD RACING WATER PASSAGES Several different water passage hole patterns have been used on 302 Ford Racing and 351 Ford Racing cylinder blocks and heads since their introduction. Engine assemblers should lay the head gasket on the block and the cylinder head (with front of the gasket toward the front of the engine) to make sure there is a path for coolant flow from the block into the head. In some cases, holes may have to be drilled in the block or head, or punched in the gasket. Current Ford Racing cylinder head gaskets are listed on page 120. *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. When ordering parts, consider these key points: • 302 Ford Racing Block (M-6010-R302)—can be used with all 289/302/302 BOSS applications. • 351 Ford Racing Blocks (M-6010-E351 thru M-6010-W351)—can be used with all production 351W applications, except those relating to crankshaft main bearing diameter. The 351 Ford Racing block is machined for the smaller 351C type bearings. Ford Racing crankshafts feature the smaller 351C main journals that are compatible with these blocks. The block is available in two deck heights (9.500" and 9.200"), so either Windsor or Cleveland components can be used topside. Requires 289/302/351W type camshaft. • If 302/351 Ford Racing heads are used on 302/351 Ford Racing blocks, the Ford Racing type intake manifolds are required. www.fordracingparts.com 213 BIG BLOCK V-8 ENGINES 429/429CJ/429SCJ/429 BOSS/460 During The Golden Age of Muscle, highperformance versions of 429/460 engines flashed on the scene like a firefly. The glow was brief—from 1969 to 1971. The memory lingers on. All of those cubic inches! Never again available directly from the factory ready for competition. Luckily, engines and pieces are still around. There are several ways to go, depending on the performance level you want, be it simply a Bracket Drag Racer, or something more potent, like an offshore power boat, big torquing engine for truck pulls or a Pro Stock drag machine. Here’s a brief description of production engines to give you an idea of part interchangeability and general performance level. 429/460 The 429 “Thunder Jet” was introduced in 1968. It’s your basic passenger car “wedge” engine design with hydraulic cam, 2-bolt main caps, and either 2V or 4V carburetor. Cast iron “rail” rocker arms are mounted on non-adjustable, positive stop studs (1968-72). 1973 and later 429/460 engines use pedestal-mount rocker arms as described for 351C engines on page 213. The 460 is a stroked version of the 429. With modifications, these engines can be used for most competition, except offshore boats or with a supercharger. 429CJ (COBRA JET) Take a base 429, then add a hotter hydraulic cam, larger CFM carburetor, heads with bigger ports and valves, plus a few other items and you have a 429CJ. 1970 engines had 2-bolt mains; 1971 models 4-bolts. Engines built before 11/1/69 use an adjustable, non-positive stop rocker arm stud, so a mechanical cam is easily installed. 429SCJ (SUPER COBRA JET) Now, we’re talking about an engine you can modify for serious competition. The 429SCJ has 4-bolt main caps (#2, #3, and #4 journals), mechanical cam, adjustable non-positive stop rocker arm studs, stamped rocker arms and push rod guide plates. The pistons are forged aluminum and con rod bolt seats are spot faced. As with the CJ, production ended in 1971. 429 BOSS This is an all-out competition design with aluminum heads and hemi combustion chambers (technically, they’re “crescent-shaped”). The first few hundred in 1969 for NASCAR competition were called “S” engines; the later street version is a “T” engine. “T” engine con rods are spot faced for a .375" bolt and hex nut. “S” engine con rods are beefier, 0.056" shorter, have wider bearing journals and use a .5" bolt with 12-point nut. John Force Dan Millen NHRA OutlawChamp Mustang Series 214 Techline (800) FORD788 *Not legal for sale or use on pollution-controlled motor vehicles. **Direct replacement part. See pages 2-8 for important safety, emissions and warranty information. ENGINE BUILDING TIPS & SPECS WE THOUGHT YOU OUGHT TO KNOW This is not a how-to book. It’s basically a listing of currently available Ford Racing Performance Parts. The pieces can be bought by professionals, professional amateurs, weekend hobbyists or rank beginners. A certain amount of automotive skill is assumed in presenting the parts. Modifying an engine, be it a complete assembly or a bare block, requires experience and know-how. If you don’t know, ask someone who does. Read up and find out all you can before putting down your bucks for those long dreamed of pieces. And if at all possible, consult an experienced engine builder. You may find it to your advantage to have him do a portion or all of the heavy machining and wrenching. What we have here are just a few of the key bits of information and specs. The idea is to help keep midnight thrashing to a minimum, because parts don’t go together right, or there’s more to a job than you imagined. COMPRESSION RATIO Increasing the compression ratio (CR) is often one of the first engine performance modifications. Squeezing the air-fuel mixture into a smaller space increases its temperature and ease of ignition; thus the rate at which heat is extracted from the fuel. Engineers call it “thermal efficiency.” Simply put, it means that increasing the compression ratio increases horsepower. Henry Ford’s Model “T” has a CR of 3.6:1. High-performance engines operate in the area of 12.5:1. Most of today’s stock production engines are about 8.5:1. NOTE: Turbocharged engines typically have a lower CR than normally aspirated engines. Thus, if you add a turbo, you may want to lower the CR, depending on performance level. COMPRESSION RATIO CALCULATION SYMBOL DIMENSION VALUE REMARKS B G P S S/2 L H Dh r d t V Vt Vn Vd Vp Vg Vh Vcl CR Bore Gasket Bore Piston Top Land Diameter Stroke Crank Throw Con Rod Length Compression Height Deck Height Ring-to-Top Piston Piston to Deck Gasket Thickness Cylinder Volume Volume Above Top Ring Valve Notches Volume Dome Volume Piston-to-Deck Volume Gasket Volume Volume Head Volume Clearance Compression Ratio 4.000 in 4.100 in 3.965 in 3.500 in 1.750 in 6.000 in 1.440 in 9.200 in 0.250 in 0.010 in 0.040 in 720.7cc .9cc 4.0cc 10.4cc 2.1cc 8.7cc 60.2cc 65.5cc 12.0 B2 = 4.000 x 4.000 = 16.000 G2 = 4.100 x 4.100 = 16.810 P2 = 3.965 x 3.965 = 15.721 Dh – H – l – S/2 π/4 x B2 x S x 16.387 π/4 x (B2 – P2) x r x 16.387 π/4 x B2 x d x 16.387 π/4 x G2 x t x 16.387 Vt + Vn + Vp + Vg + Vh – Vd V + Vcl Vcl NOTE: 1) Math reduction; π⁄4 x 16.387 = 12.87 DETONATION Increasing the CR changes the rate at which fuel burns. Spark knock (detonation) will occur if certain modifications are not performed. Here are two of the most important: Ignition Spark Timing—Increasing the CR requires installation of new distributor springs to change advance curve. Fuel Octane Rating—Increasing the CR requires gasoline with a high octane rating (with anti-knock components to control detonation). This is not a problem with engines that burn alcohol, because it has a naturally high octane number. Engines that run on alcohol require a high CR to compensate for the fact that it generates less heat. MODIFICATION TECHNIQUES Common techniques to increase CR include: (1) Installation of a thinner head gasket. (2) Installation of “domed” or “pop-up” pistons. Check for adequate “piston-to-valve” clearance at TDC. Camshafts with more overlap require more clearance. A good rule of thumb is 0.080" for intakes and 0.100" for exhausts. (3) Removal of metal from deck face of block or cylinder head. You can safely mill off 0.010" to 0.040" (0.050" max.) from most engines. The precise amount is limited by block deck height, casting thickness, valve-to-piston clearance, etc. NOTE: Also modify the intake manifold to maintain port alignment. COMPUTING COMPRESSION RATIO Compression ratio is defined as the ratio between the Total Volume (Cylinder Volume plus Clearance Volume) above the piston at BDC and the Clearance Volume above it at TDC. Calculations for a 351 CID engine are illustrated. The formula is: CR = V + Vcl Vcl Pay particular attention to the following points: Clearance Volume (Vcl)—This is the volume above the piston (actually above top piston ring) at TDC. It consists of several small volumes. Cylinder (Swept) Volume (V)—Determined by cylinder bore and stroke (indicated by movement of piston from TDC to BDC). Cylinder Head (Combustion Chamber) Volume (Vh)—The irregular shape of the combustion chamber requires measurement (popularly called “cc”ing) with a glass burette and colored liquid, such as A.T. fluid. This catalog lists “nominal” values for Ford Racing heads. Valve Notches Volume (Vn)—Fill notches with soft clay and make level with top of piston. Remove clay with small knife and drop into graduated cylinder (filled with liquid to convenient point). Note change in level of liquid (indicating volume of notches made by clay). Domed Piston Volume (Vd)—Dome values are combination “net” values of Vd and Vn. For compression ratio calculations, they should be used as follows: • Pop-Up pistons have a “positive” dome value, which reduces the volume above the piston and thus must be subtracted (see example above). • Dished pistons have a “negative” dome value. It must be added to compute clearance volume. MAKE ALL CALCULATIONS WITH ACCURATE MEASUREMENTS OF ACTUAL PARTS. CATALOG VALUES ARE “NOMINAL” SPECIFICATIONS AND MAY VARY FROM ACTUAL SIZE. www.fordracingparts.com 215 ENGINE BUILDING TIPS & SPECS VALVE TRAIN FORD RACING CAMSHAFT USAGE When modifying production engines for performance, here are a few things to keep in mind. The durations shown in this chart are S.A.E. durations. The descriptions within each group of cams show performance characteristics and basic modification recommendations required to achieve desired performance. CAMSHAFTS • When replacing a cam, it’s a good practice to install new related components such as a distributor gear, tappets, springs, retainers, etc. It’s especially important that new tappets be installed. • Never use hydraulic lifters with a mechanical cam or solid tappets with a hydraulic cam. The ramps are not compatible. • Be sure your valve train can handle the timing events and lobe lift of your performance cam. Check for adequate piston-to-valve clearance, spring bind and retainer-to-valve clearance, spring bind and retainer-to-valve seal clearance. • Be sure to use camshaft and lifter prelube when installing the cam, to prevent scoring the lobes during break-in. Engine oil by itself (regardless of quality or viscosity) is not enough! See page 217 for description of Ford Racing prelube M-19579-A12. • Mechanical cams require lash adjustment. If production head is designed for hydraulic cam, modification is usually required. • Many design changes have occurred over the years, which affect the front of the block— especially the small V-8s. Be sure you check items such as the cam thrust plate, cam spacers, cam gear, fuel pump eccentric, timing chain, cam gear alignment and front cover clearance. • Refer to the Ford Racing “Camshaft Usage” chart for performance characteristics of cams based on their duration. • Refer to the “Camshaft Specifications” chart (page 110) for detailed data on Ford Racing camshafts. DURATION (SAE) PERFORMANCE CHARACTERISTICS ENGINE/VEHICLE USAGE AND MODIFICATIONS 270-290 Good idle quality and low RPM torque. 290-300 Fair idle quality. Good low-tomid-range torque and horsepower. 300-320 Rough idle quality. Good mid-tohigh RPM torque and horsepower. Use with stock or slightly modified engine, stock axle gears and with A.T. or M.T. Will work with stock or modified engine. Can use stock axle gears and with A.T. or M.T. Use with M.T. or high stall A.T. Requires improved carburetion, ignition and exhaust systems. Engine will have lower vacuum than stock. 320-340 Rough idle quality. Good mid-toUse with M.T. or very high stall A.T. Requires high RPM torque and horsepower. improved carburetion, ignition and exhaust systems. For all-out competition only. Engine will not provide enough vacuum for accessories. Axle gear ratios must be properly selected. ROLLER TAPPET CAMSHAFT Most engines are designed with hydraulic or mechanical flat tappet camshafts, which meet the needs of regular production engines that seldom see 6000 RPM. Flat tappet cams are more than adequate for many competition engines. For ultra-high performance applications where durability and high RPM capability are paramount, however, roller tappet camshafts are very popular. As the name implies, a cylindrical roller “rolls” over the cam lobe, instead of “sliding” as does a conventional flat tappet. This not only allows a roller tappet to follow a more radical cam lobe profile, but it reduces friction and lessens tappet scuffing of the cam lobes. Ford introduced hydraulic roller tappet camshafts on 1985 Mustang (and Mark VII LSC) with 302 (5.0L) High Output engine. Here is a brief description of components. Roller Tappet—Longer than flat tappet, because of roller. Hydraulic portion functions like a standard flat tappet. Roller Tappet Camshaft—Machined from steel, instead of typical iron used for flat tappet cam. Cam lobes specially ground and hardened to withstand loads of roller tappets. Do not attempt to use with flat tappets! Roller Tappet Block—Longer, production 5.0L hydraulic roller tappet requires higher tappet boss than block for flat tappet cam. Thus, 5.0L hydraulic roller tappet cam cannot be used in block designed for flat tappet cam. However, flat tappet camshafts can be used in roller tappet blocks. Roller Tappet Distributor Gear—Machined from steel and specially hardened to be compatible with billet-steel roller camshaft. Do not attempt to use cast iron gears designed for flat tappet cams. Roller Tappet Push Rod—Push rods are shorter than those designed for flat tappet cam engine, because of longer roller tappet. Rocker arm end has hardened ball that is copper plated to resist wear by rocker arms rubbing on push rod (which don’t rotate). A small bracket encircles one end of push rod as reminder to install that end upward (on 1985-86 models only). Roller Tappet Guide Plate—Holds roller tappets in alignment with camshaft lobes (flat tappets rotate). Must be installed with “UP” marking upward. Roller Tappet Guide Plate Retainer—Made of spring steel. Fits in valley cover area to hold guide plates in position. ROLLER ROCKER ARMS Most production engines use stamped steel or cast iron rocker arms, as described on page 208. As the push rod moves one end upward—the rocker arm pivots on a ball or sled-type fulcrum— and the other end pushes the valve downward. Although “sliding” friction exists at each point, this design is okay for street engines and even many performance applications. 216 Techline (800) FORD788 ROLLER ROCKER ARMS POSITIVE-TYPE OIL SEALS (Continued from page 216) Positive-type oil seals are recommended on OHV performance engines to prevent oil from running down the valve past the valve guide and into the combustion chamber and contaminating the air-fuel mixture. The cylinder head must be machined as illustrated to accept the oil seal. Lightweight aluminum roller rocker arms, however, provide many advantages for continuous high RPM operation. They’re mounted on needle bearings and feature a cylindrical roller that “rolls” over the valve tip to move it downward. This reduces friction, heat and wear, and only requires about half the horsepower to operate the valve train. And valve train stability is greatly increased. Roller rockers reduce valve stem wear and valve guide wear to an absolute minimum, because the roller doesn’t push the valve from side to side as it is opened, as occurs with standard rocker arms, as they “slide” over the valve tip. CAMSHAFT TIMING DEGREE WHEEL No camshaft installation is complete without checking camshaft timing events. Use a timing degree wheel to check for correct camshaft installation. For modular engines use camshaft timing kit M-6266-D46. Ford Racing offers roller rocker arms in several ratios for the Ford Racing V-6, small block V-8s and big block 429/460 V-8s. FORD RACING ROLLER TAPPET CAMSHAFTS Ford Racing offers roller tappet camshafts for the following engines: 5.0L (302) HO M-6250-B303* M-6250-E303* M-6250-F303* M-6250-X303* M-6250-Z303* Roller Camshaft only Roller Camshaft only Roller Camshaft only Roller Camshaft only Roller Camshaft only VALVE SPRING RETAINERS AND KEEPERS VALVE PUSH RODS Hardened push rods are required on valve trains that use a guide plate (because they rub against the plate). Do not use non-hardened push rods. Push rod length is important to maintain correct valve train geometry. The process of drilling an oil hole down the center removes some material from the spherical ball at each end. Push rods are described by “Gauge length” (the distance between the ends before drilling the oil hole). The actual “Measured” length is usually about 0.025" shorter than the gauge length. CAMSHAFT AND LIFTER PRELUBE M-19579-A12 • Highest-quality cam lube for camshaft replacement and engine assembly • Recommended for use with all Ford Racing flat tappet camshafts • Distributed in cases of 12 • Single bottles may be available from your Ford Racing distributor part number CM-19579-A1 • Use engine oil on roller cam shafts Currently Ford Racing only offers retainers and single-lock groove keepers in a 7-degree design. They are compatible with all Ford Racing valve springs for the Ford Racing V-6, small block V-8s and big block 429/460 V-8s. 10-degree retainers/keepers are available from aftermarket suppliers. Do not attempt to interchange 7-degree retainers with 10-degree keepers and vice versa. Single-lock groove keepers are recommended for high-performance engines. Production 351C (except BOSS and HO) 351M and 400 engines use multi-groove keepers (to promote valve rotation). If you modify for any extended highrevving performance, replace the valves, retainers and keepers with a single-lock groove design. FORD RACING PERFORMANCE PARTS USED: FRPP M-6007-Z347 Crate Engine Dan Pina's 1987 Drift Mustang www.fordracingparts.com 217 ENGINE BUILDING TIPS & SPECS VALVE SPRINGS AND THINGS ROCKER ARMS AND STUDS Valve springs are a critical part of valve train operation. They’re designed to exert a specific load at a specific installed height, thus spring selection and installation are important. A single spring is generally used for stock engines. Dual or triple springs are often necessary for performance applications to increase the load for a given installed height. If installed height isn’t sufficient to handle camshaft lobe lift, coil bind may occur. 429 BOSS, FE engines and some 4-cylinder rocker arms are shaft-mounted, while others are individually mounted (in several ways), as shown in the illustration. A non-adjustable stud is used in production engines with hydraulic cams. Mechanical camshafts require rocker arm adjustment to set valve lash (hydraulic cams with anti pump-up lifters also require adjustment). Installed spring height is the distance from the spring seat to the bottom of the valve retainer. Shims can be used under the spring to change spring height. If installed under stamped seat, shims and seat must have same outside diameter. Spring seats on most production engines consist of a boss machined in the head, on which the spring pilots. On stock performance engines (302 BOSS, 351C BOSS and HO, 429 CJ/SCJ and BOSS) the head is flat and the spring sits in stamped spring seat. Ford Racing offers spring seats for use with Ford Racing aluminum cylinder heads to prevent damage to the spring seat area. This is a conventional rocker arm with closetolerance slot in head to guide push rods and maintain rocker arm alignment. Can be used with mechanical or hydraulic camshafts. USAGE: All 289 high-performance and 1963-661⁄2 standard 289 Shown here is a “rail” rocker arm with “loose-fit” hole in cylinder head for push rods. The U-shaped rocker arms maintain alignment. Can only be used with hydraulic camshafts. USAGE: 19661⁄2-1968 standard 289 1968-76 302 and 351W Here is a modified valve train to convert rail rocker arm design for mechanical cam. Requires conventional rocker arms, guide plates, hardened pushrods (they rub on plates) and threaded adjustable rocker studs. Requires different guide plate than the one used with a similar 302 BOSS setup. USAGE: 289/302/351W with mechanical camshaft. 218 Techline (800) FORD788 The illustration above is typical of 351C-351M-400 canted valve engines (429-460 engines are similar). The rocker arm is mounted on a slotted pedestal, moves on a “sled” fulcrum, and is retained by a bolt. 351C BOSS engines use the 302 BOSS type valve train (also used on 429 CJ/SCJ), 1968-72 429/460 with hydraulic camshafts use a screw-in positive stop stud. 1973 and later 429/460 have the 351C-type slotted pedestal. A modified pedestal is used on 1978 and later 302/351W engines. A stamped fulcrum guide is used with each pair of rocker arms. ROCKER STUD COMPARISON …AND IF YOU HAVE 302/351 FORD RACING ALUMINUM HEADS ➀ These heads come with a tapped .75" pipe thread hole in the combustion face, but no hole in the intake manifold face. Press-in stud with adjustable rocker nut. NOT recommended with mechanical camshafts. USAGE: Standard 289 and 1968 302 Press-in positive stop stud. Cannot be adjusted to set lash with mechanical camshaft. USAGE: 1969-76 302/351W If your application requires external water outlets, see diagram below. TO INSTALL ON WINDSOR-TYPE BLOCK (289/302/302 BOSS/351W) 1. Install pipe plug in hole. Finish so it doesn’t protrude above head face. 2. Drill a 0.800" diameter hole in the intake face as shown or use the .75" pipe thread external water outlet valve provided in the front and rear ends of Ford Racing heads produced after July, 1984. TO INSTALL ON CLEVELAND-TYPE BLOCK (351C/351M/400) 1. Requires no special head work. Screw-in, positive stop stud. NOTE: ➀ Heads produced after 6/1/85 do not have .75" pipe threads at front and rear of head face and must be drilled and tapped as shown in illustration. USAGE: 1968-72 429 with hydraulic camshaft HEAD MODIFICATION FOR MECHANICAL CAM Pedestal type cylinder heads for hydraulic cams can be modified to accept a mechanical cam (351C/351M/400 shown). Machine at right angles to the existing hole—not the bottom of the head. The valves operate at compound angles. With 302/351W type pedestals, measure from the top of the pedestal. Screw-in, adjustable stud. Required for mechanical camshaft (and hydraulic with anti-pump-up lifters). USAGE: 289 Hi-Performance, 302 BOSS, 351C BOSS and HO and 429 CJ/SCJ All 302/351W All 351C/351M/400 1973-95 429/460 1968-72 429/460 CYLINDER HEAD WATER PASSAGE MODIFICATION As described on this page, cylinder heads for 351C/351M/400 engines have a water outlet passage in the combustion face, whereas 289/302/351W heads have a water outlet passage in the intake manifold face of the head. Heads can be interchanged, if provision is made for appropriate water passages. .230" .300" .300" .230" TO INSTALL CLEVELANDTYPE HEADS (351C/351M/400) ON A WINDSOR-TYPE BLOCK (289/302/302 BOSS/351W) 1. Drill a 0.800" diameter hole in the intake manifold face of the head as illustrated. 2. Plug square hole in cylinder head. Install heads with Cleveland-type head gasket. 3. Use intake manifold gasket to match intake manifold. NOTE: If BOSS-type heads (302 or 351C) are used in either procedure, remember they have larger rounded ports than conventional heads; thus a unique BOSStype intake manifold gasket is required. 1 2 3 4 Crank throw times two equals stroke. Changing rod length or piston compression height only changes where stroke occurs in cylinder bore - not length of stroke. Use of crank with longer stroke and stock rods results in stock piston being above top of block. Requires rod or new piston compression height. Re-located piston pin Shorter rod www.fordracingparts.com 219 DEALER LIST CODES: LS = LOCAL SALES MO = MAIL ORDER EB = ENGINE BUILDER IN = INSTALLATION WH = WHOLESALE ALABAMA BENNETT RACING, INC. HALEYVILLE, AL 35565 205-486-5520 MO, EB WOODY ANDERSON FORD HUNTSVILLE, AL 35816 256-539-9441 LS, WH ARIZONA AMP PERFORMANCE PHOENIX, AZ 85034 602-437-2727 LS, MO, EB, IN, WH BELL FORD PHOENIX, AZ 85023 602 564-3123 LS, MO, IN, WH FIVE STAR FORD SCOTTSDALE, AZ 85257 480-946-3900 LS, MO, IN, WH FORD OF NORTH SCOTTSDALE SCOTTSDALE, AZ 85260 800-537-8332 LS, MO, WH HOLMES TUTTLE FORD TUCSON, AZ 85705 520-292-3661 LS, MO, WH MEL CLAYTON FORD PHOENIX, AZ 85014 602-274-8383 LS, MO, IN, WH SANDERSON FORD/ SPECIALTY PARTS GLENDALE, AZ 85301 888-364-3673 LS, MO, WH ARKANSAS KEITH CRAFT RACING ARKADELPHIA, AR 71923 870-246-7460 MO, EB CALIFORNIA AUTOCARS/SPEEDSHOP DIRECT ATASCADERO, CA 93422 877-SPEED BY MUSCLE MOTORS PERFORMANCE INC. CANOGA PARK, CA 91304 818-341-7223 Techline (800) FORD788 WH LS, MO, EB, IN, WH LS, MO, WH BROTHER’S PERFORMANCE WAREHOUSE CORONA, CA 92880 951-735-8880 LS, MO, IN, WH CAL-STATE AUTO PARTS, INC. SAN DIEGO, CA 92123 858-292-1622 MUSTANGS PLUS STOCKTON, CA 95205 800-999-4289 LS, MO PERFORMANCE AUTOMOTIVE WAREHOUSE CHATSWORTH, CA 91311 818-678-3000 COLORADO COLORADO MUSTANG SPECIALISTS AURORA, CO 80010 303-343-7024 LS, MO, IN, WH LS, MO, EB WH CALIFORNIA MUSTANG PARTS & ACCESSORIES CITY OF INDUSTRY, CA 91748 800-775-0101 MO F2 FOCUS PERFORMANCE SANTA FE SPRINGS, CA 90670 562-698-3000 LS, MO, EB, IN, WH PERFORMANCE IMPORTS ORANGE, CA 92867 714-633-6220 R & E RACING LANCASTER, CA 93534 661-948-7622 RACEWAY FORD RIVERSIDE, CA 92507 909-784-1000 LS, IN, WH FAIRVIEW FORD SALES, INC. SAN BERNARDINO, CA 92412 909-386-0220 LS, IN, WH SACRAMENTO MUSTANG SACRAMENTO, CA 95841 916-484-3434 LS, MO, IN FAIRWAY FORD SPORT & PERFORMANCE PLACENTIA, CA 92870 714-528-4670 SANTA MARGARITA FORD RANCHO SANTA MARGARITA, CA 92688 949-888-4344 LS, MO, IN, WH LS, WH FRONTIER FORD SANTA CLARA, CA 95051 408-247-6583 SENATOR FORD SACRAMENTO, CA 95823 800-957-3673 LS, WH LS, MO, IN, WH GALPIN AUTO SPORTS VAN NUYS, CA 91406 818-922-3800 SERRAMONTE FORD COLMA, CA 94014 800-762-9664 LS, WH HARROLD FORD SACRAMENTO, CA 95825 916-922-1535 WH SPEED WAREHOUSE, INC. HAYWARD, CA 94541 510-786-3555 LS, WH HAWAII RACING SIMI VALLEY, CA 93065 805-583-8880 LS, MO, EB, WH T.O.E. PERFORMANCE PRODUCTS SUISUN CITY, CA 94585 707-425-2996 LS, MO, EB, IN, WH MOSS MOTORS GOLETA, CA 93117 800-667-7872 MOSSY FORD SAN DIEGO, CA 92109 858-273-7500 TEAM C, INC. BELLFLOWER, CA 90706 562-866-3887 TUTTLE CLICK FORD IRVINE, CA 92618 949-472-5225 LS, IN, WH 220 WEST COAST DIFFERENTIALS RANCHO CORDOVA, CA 95742 800-642-0950 CONNECTICUT FORD OF BRANFORD BRANFORD, CT 06405 203-488-8325 LS, MO, IN, WH FLORIDA BRANDON FORD TAMPA, FL 33619 813-621-7759 LS, WH DELRAY LINCOLN MERCURY DELRAY BEACH, FL 33483 800-433-0018 WH GREENWAY FORD ORLANDO, FL 32817 407-249-3270 LS, WH MOROONE FORD FORT LAUDERDALE, FL 33304 954-564-3221 MURRAY’S SPEED & CUSTOM NORTH MIAMI, FL 33169 305-687-7297 LS, WH NATIONAL PERFORMANCE WAREHOUSE MIAMI, FL 33014 800-344-0368 WH PALM COAST FORD PALM COAST, FL 32164 386-447-3380 LS, IN, WH POWERED BY FORD ORLANDO, FL 32805 407-843-3673 LS, MO, EB, IN, WH RACER WALSH, INC. JACKSONVILLE, FL 32216 800-334-0151 LS, MO, EB, WH SOUTHERN PERFORMANCE WAREHOUSE CLEARWATER, FL 33764 727-531-8497 HAWAII KANSAS MICHIGAN CUTTER FORD, INC AIEA, HI 96701 808-564-9210 ARROW SPEED WAREHOUSE KANSAS CITY, KS 66105 800-255-4606 DIVERSIFIED PRODUCTS MARKETING, INC. PLYMOUTH, MI 48170 734-459-0130 WH LS, MO, WH ILLINOIS LS, WH SPEED UNLIMITED PENSACOLA, FL 32506 850-455-1341 ANDERSON FORD MOTORSPORT CLINTON, IL 61727 217-935-2076 D.S.S. COMPETITION ENGINES ST. CHARLES, IL 60174 630-587-1169 LS, MO, EB, WH LS, MO, IN WAYNE AKERS FORD INC. LAKE WORTH, FL 33461 561-540-9651 DTS/DRIVE TRAIN SPECIALISTS WARREN, MI 48089 800-521-0628 LS, WH LS, MO, IN JACK DEMMER FORD, INC. WAYNE, MI 48184 734-721-2550 LS, MO, IN, WH LS, MO, EB, WH STEEDA AUTOSPORTS POMPANO BEACH, FL 33069 954-960-0774 RUSTY ECK FORD WICHITA, KS 67207 800-999-2760 MIDWEST TRUCK & AUTO PARTS, INC. CHICAGO, IL 60609-2517 773-579-3785 LS, MO, IN, WH ROD BAKER FORD SALES PLAINFIELD, IL 60586 815-436-5681 KENTUCKY B.F. EVANS FORD, INCORPORATED LIVERMORE, KY 42352 270-278-2376 LS, WH LEO CAPALDI RACING, INC. LENOX TWP, MI 48050 586-727-4834 LS, WH MO, WH MODULAR DEPOT SOUTHGATE, KY 41017 877-234-5551 LIVERNOIS MOTORSPORTS DEARBORN, MI 48125 313-561-5500 LS, MO, EB, IN, WH GEORGIA LS, IN, WH LOUISIANA AMERICAN PERFORMANCE PARTS WAREHOUSE, INC. ATLANTA, GA 30318 404-355-8711 SESSLER FORD LIBERTYVILLE, IL 60048 847-362-4550 LAMARQUE FORD KENNER, LA 70062 800-259-2881 LS, MO, EB, IN, WH LS, MO, IN, WH ROUSH INDUSTRIES LIVONIA, MI 48150 734-779-7000 MARYLAND TOTAL PERFORMANCE CLINTON TOWNSHIP, MI 480361108 586-468-3673 MOTOR STATE DISTRIBUTING WATERVLIET, MI 49098 269-463-4113 WH WH BARNETT PERFORMANCE ATLANTA, GA 30312 800-533-1320 SUTTON HIGH PERFORMANCE/ SUTTON FORD MATTESON, IL 60443 708-720-8500 LS, MO, WH LS, MO, EB, IN, WH BILLY HOWELL FORD LINCOLN-MERCURY CUMMING, GA 30040 770-887-2311 VICTOR FORD WAUCONDA, IL 60084 847-526-5541 WH GENE EVANS TEAM FORD UNION CITY, GA 30291 770-964-8604 WINNER’S CIRCLE SPEED & CUSTOM JOLIET, IL 60431 815-727-6331 PLAZA FORD, INC. BEL AIR, MD 21014 410-879-9033 LS, MO, EB, IN, WH LS, IN, WH VARSITY FORD INC. ANN ARBOR, MI 48106 734-996-2300 EXT 271 SPEED UNLIMITED PERFORMANCE CENTER MORNINGSIDE, MD 20746 301-420-2727 LS, MO, IN, WH VILLAGE FORD DEARBORN, MI 48124 313-565-6799 LS, MO, WH LS, MO, EB, IN, WH LS, MO, IN, WH LS JOHN BLEAKLEY FORD, INC. LITHIA SPRINGS, GA 30122 770-941-5300 LS, MO, IN, WH MUSTANGS UNLIMITED, INC. LAWRENCEVILLE, GA 30043 770-446-1965 LS, MO, WH PARKWAY FORD SALES, INC. ADAIRSVILLE, GA 30103 770-773-3673 LS, MO MASSACHUSETTS INDIANA DEALERS ENGINE SALES, INC. INDIANAPOLIS, IN 46227 317-781-9373 FORTE PARTS CONNECTION BURLINGTON, MA 01803 781-273-9900 LS, MO, EB, IN, WH LS THE TIRE RACK SOUTH BEND, IN 46628-8422 888-541-1777 VEHICLE SPECIALTIES, INC. HAMMOND, IN 46323 800-424-8741 IMPERIAL PERFORMANCE MILFORD, MA 01757 508-473-2800 LS, MO, IN, WH MINNESOTA APPLE VALLEY FORD APPLE VALLEY, MN 55124 952-431-5900 LS, MO, EB, IN, WH TOUSLEY FORD WHITE BEAR LAKE, MN 55110 612-484-7231 LS, MO, WH WH www.fordracingparts.com 221 DEALER LIST MISSISSIPPI B B & T RACING SOUTHAVEN, MS 38671 662-280-7600 LS, MO, EB, IN, WH HARRIS MUSTANG SUPPLY CHARLOTTE, NC 28269 704-598-1412 BAXTER AUTO PARTS PORTLAND, OR 97217 503-417-5300 LS, WH HILBISH MOTOR CO. KANNAPOLIS, NC 28083 800-849-0233 LS, MO, EB, IN, WH LANDMARK FORD TIGARD, OR 97223 503-639-1131 SOUTH DAKOTA PERFORMANCE MOETORS, INC. VALLEY SPRINGS, SD 57068 605-757-6281 LS, MO, EB LS, MO, WH MISSOURI SUNSET AUTO COMPANY ST. LOUIS, MO 63127 314-843-4431 LS, MO, IN, WH NEBRASKA SPEEDWAY MOTORS LINCOLN, NE 68528 402-323-3210 NEW JERSEY DOWNS FORD, INC. TOMS RIVER, NJ 08753 732-349-2240 EXT 958 LS, MO, EB, IN, WHNEW JERSEY JOE HECK RACING LAKEWOOD, NJ 08701 732-370-4325 LS, MO, EB, IN, WH NEW YORK NORTHCOAST PERFORMANCE ONTARIO, NY 14519 585-216-1210 LS, MO, WH R V ENGINES ALEXANDER, NY 14005 585-344-0784 LS, EB, IN S-K SPEED RACING EQUIPMENT ROCKVILLE CENTRE, NY 11570 516-766-2225 LS, MO, EB, WH LS, MO, EB, WH PENNSYLVANIA TEX RACING ENTERPRISES ETHER, NC 27247 910-428-9522 CARL BEASLEY FORD, INC. YORK, PA 17402 717-755-2911 LS, MO, IN, WH LS, MO, IN, WH YOUNG FORD INC. CHARLOTTE, NC 28213 704-598-2599 CJ PONY PARTS, INC. HARRISBURG, PA 17112 800-888-6473 LS, IN LS, MO, IN, WH OHIO GEORGES SPEED SHOP DAYTON, OH 45404 937-233-0353 LS, EB, WH JEG’S HIGH PERFORMANCE DELAWARE, OH 43015 800-345-4545 LS, MO, WH MATHEWS FORD OREGON, OH 43616 800-225-8210 LS, MO, IN, WH RICART FORD COLUMBUS, OH 43227 800-882-7625 DEACON JONES FORD LINCOLN MERCURY INC. GOLDSBORO, NC 27534 919-736-3387 222 Techline (800) FORD788 LS, MO, EB, WH LS KEYSTONE AUTOMOTIVE OPERATIONS, INC. EXETER, PA 18643 570-655-4514 MO LS, MO, EB, IN, WH WHITEYS AUTO GROUP MANSFIELD, OH 44906 800-248-3788 RHODE ISLAND LS, MO, EB, IN, WH LATEMODEL RESTORATION SUPPLY INC. HEWITT, TX 76643 254-296-6500 LEIF JOHNSON FORD AUSTIN, TX 78751 800-274-3673 LS, MO, IN, WH K&G SPEED ASSOCIATES, INC. BROOMALL, PA 19008 610-359-1616 SPRINGFIELD FORD SPRINGFIELD, PA 19064 610-544-0700 ALDRIDGE MOTORSPORTS ENGINEERING PORTLAND, OR 97213 503-284-8484 DALLAS MUSTANG PARTS DALLAS, TX 75238 800-MUSTANG LS, MO, WH GILBOY FORD MERCURY INC. WHITEHALL, PA 18052-0284 610-434-4211 SUMMIT RACING EQUIPMENT TALLMADGE, OH 44278 800-230-3030 OREGON LS, WH LS, MO, EB, IN, WH FRED BEANS FORD OF BOYERTOWN BOYERTOWN, PA 19512 610-367-6981 LS NORTH CAROLINA TENNESSEE SPEED SPORT GOODLETTSVILLE, TN 37072 615-851-4070 TEXAS MCNEW DILLSBURG, PA, 17019 717-432-9503 LS, MO, IN, WH CAROLINA MUSTANG, INC. CARY, NC 27511 919-467-2900 TENNESSEE HOLCOMB MOTORSPORTS, INC. LUMBERTON, NC 28358 800-475-7223 MAC HAIK FORD LTD. HOUSTON, TX 77024 713-932-5050 LS, MO, EB, IN, WH NORTH PARK LINCOLN-MERCURY SAN ANTONIO, TX 78216 210-341-8841 LS, MO, WH NORTHSIDE FORD SAN ANTONIO, TX 78216 800-542-9912 LS, IN, WH SCOGGIN-DICKEY PARTS CENTER LUBBOCK, TX 79424 800-456-0211 LS, MO, EB, WH RACERS EQUIPMENT WAREHOUSE EAST PROVIDENCE, RI 02914 800-556-2864 SOUTHWEST FORD, INC. WEATHERFORD, TX 76086 800-256-7933 LS, MO, EB, WH LS, MO, WH TASCA AUTOMOTIVE GROUP CRANSTON, RI 02920 401-681-1300 TEXAS MUSTANG PARTS WACO, TX 76706 800-527-1588 LS, MO TOMMIE VAUGHN MOTORS HOUSTON, TX 77007 713-869-4755 LS, MO, WH TOWN EAST MESQUITE, TX 75150 972-682-1285 LS, WH TYLER FORD TYLER, TX 75701 903-597-9331 LS WASHINGTON Eastern Region EUROPEAN COUNTRIES BICKFORD FORD SNOHOMISH, WA 98290 800-527-1101 FORMULE FORD, INC. GRANBY, QC J2G 8C8 450-777-1777 LS, IN, WH LS, MO, IN, WH POWER TORQUE ENGINEERING LTD. BINLEY, COVENTRY, CV3 2RQ 0046 02476 635757 Pacific Region MO, WH BROWN BROS FORD SALES VANCOUVER, BC V5X 2S6 604-324-7504 REAL STEEL COWLEY, MIDD UB8 2JP 44-1895-440505 FORD POWERTRAIN APPLICATIONS PUYALLUP, WA 98371 253-848-9503 LS, MO, EB RANDY’S RING & PINION EVERETT, WA 98204 800-347-1188 LS, MO, IN, WH UTAH WESTLAND FORD OGDEN, UT 84401 877-629-5567 LS, MO, IN, WH LS, MO, EB, WH MOPAC AUTO SUPPLY LTD. LANGLEY, BC V2Y 3C2 604-881-4900 US-PARTS/FINN-AM OY HELSINKI, SF00810 358-9-251-31999 LS, MO, EB, IN, WH Western Region WISCONSIN GORDIE BOUCHER FORD MENOMONEE FALLS, WI 53051 262-250-9838 LS, MO, IN, WH VIRGINIA B & W MACHINE & TOOL SALEM, VA 24153 540-387-3854 LS, IN, WH PERFORMANCE PLUS, INC. MADISON, WI 53719 608-277-8161 LS, IN LS, MO, EB COWLES FORD WOODBRIDGE, VA 22193 800-730-8417 CANADA LS, IN, WH Central Region EASTSIDE AUTO & MACHINE WAYNESBORO, VA 22980 540-943-2583 CAMPBELL FORD SALES, LTD. OTTAWA, ON K1Z 0A3 613-725-3611 LS, MO, EB, WH LS, MO, IN, WH KIMNACH FORD NORFOLK, VA 23502 800-542-3512 DIXIE FORD SALES MISSISSAUGA, ON L4W 1E6 905-629-1711 LS, MO, WH LS, IN, WH KOONS STERLING FORD STERLING, VA 20164 800-966-7078 KARBELT SPEED & CUSTOM AJAX, ON L1S 4N8 905-619-6660 LS, MO, IN, WH WH POMOCO LINCOLN-MERCURY OF NEWPORT NEWS NEWPORT NEWS, VA 23602 888-833-4949 R.C.O. ENTERPRISES INC. AYLMER, ON N5H 2S1 519-393-6665 FREEDOM FORD SALES EDMONTON, AB T6C 4H8 780-462-7575 METRO FORD SALES, LTD. CALGARY, AB T2P 3K9 403-263-6670 LS, MO, EB, IN, WH MGM FORD-LINCOLN SALES LTD. RED DEER, AB T4R 1M5 403-346-6621 LS, MO, EB, IN, WH AUSTRALIA EAGLE AUTO SPARES DANDENONG, VICT 3175 011-613-8710 3000 LS, MO, WH METRO FORD PARTS DISTRIBUTION CENTRE BRISBANE, QLD 4009 61-7-30007166 LS, MO, WH RACEPARTS AUSTRALIA PTY LTD. LOGANHOLME, QLD 4129 011-61-7-3807-6870 LS, MO, WH MO, WH LS, WH PURVIS FORD, INC. FREDERICKSBURG, VA 22408 540-898-3000 SEAN HYLAND MOTORSPORT WOODSTOCK, ON N4V 1B7 519-421-2291 LS, MO, EB, IN LS, WH TED BRITT FORD SALES FAIRFAX, VA 22030 703-591-8484 SUMMIT FORD SALES LTD. REXDALE, ON M9V 2C1 416-741-5581 LS, MO, IN, WH LS, MO, IN, WH NEW ZEALAND STA PARTS (SEGEDIN TRUCK & AUTO PARTS LTD.) AIRPORT OAKS, AUCK 011-649-256-1120 LS, MO, WH www.fordracingparts.com 223 SUGGESTED RETAIL PRICE LIST EFFECTIVE JANUARY 1, 2008 (PRICES IN U.S. DOLLARS) All prices and specifications are subject to change without notice. For the most up-to-date pricing and tech info visit www.fordracingparts.com PARTS SECTION Part Number Description Pg. No. Sugg. Retail Part Number Description Pg. No. Sugg. Retail CM-1828-FCM CM-1828-FRCM CM-19546-A1 CM-6731-FL1995 LIC PLATE-FORD OVAL-SELL INFO LIC PLATE-FORD RACE-SELL INFO FRICTION MODIFIER-SELLING INFO FL1995 HI PERF OIL FILTER 177 177 151 116 $4.50 $4.95 $3.75 $19.95 M-1007-T178C M-1007-T178P M-1007-T178S M-1007-U1885 17" X 8" CHROME MUSTANG GT WHEEL 17" X 8" POLISHED MUSTANG GT WHEEL 17" X 8" SILVER MUSTANG GT WHEEL 18" X 8.5" SILVER MUSTANG GT WHEEL 56 56 56 44 $319.00 $210.00 $140.00 $185.00 CM-6731-FL1A CM-6731-FL299 CM-6731-FL300 CM-6731-FL400 FL1A HI PERF OIL FILTER FL299 HI PERF OIL FILTER FL300 HI PERF OIL FILTER FL400S HI PERF OIL FILTER 116 116 116 116 $13.95 $19.95 $13.95 $13.75 M-1007-U1885P M-1012-A M-1012-K M-1096-A 18" X 8.5" POLISHED MUSTANG GT WHEEL WHEEL NUT (5 PACK) WHEEL NUT/LOCK KIT 2005 MUSTANG BAR & PONY CAP 56 63 62 63 $219.00 $7.95 $44.95 $28.00 CM-6731-FL784 CM-6731-FL820 M-0750-A2008 M-1007-A179 FL784 HI PERF OIL FILTER FL820 HI PERF OIL FILTER 2008 CATALOG (1) ANNIVERSARY COBRA WHEEL 116 116 57 $19.95 $13.75 $5.00 $195.00 M-1096-B M-1096-CA M-1096-D M-1096-FR 2005 MUST BAR & PONY SPINNER CENTER CAP CENTER CAP CENTER CAP 63 63 63 63 $12.99 $28.00 $50.00 $28.00 M-1007-A208 M-1007-B178C M-1007-C178 M-1007-C58 F250 HARLEY-DAVIDSON WHEEL 2001 17" X 8" CHROME MUSTANG WHEEL 1996 CHROME COBRA WHEEL 1995 CHROME COBRA “R” WHEEL 60 58 58 57 $475.00 $299.00 $219.00 $295.00 M-1096-FR1 M-1096-H M-1096-J M-1096-K 2005-UP FORD RACING CENTER CAP CENTER CAP CENTER CAP CENTER CAP 63 63 63 63 $28.00 $62.99 $34.00 $28.00 M-1007-D178 M-1007-F1810 M-1007-F1810A M-1007-F500 1998 COBRA WHEEL MUSTANG GT-R WHEEL GRANDAM REAR WHEEL SILVER FORD RACING WHEEL 58 15 15 60 $155.00 $1,219.00 $1,219.00 $250.00 M-1096-M M-1096-N M-1096-W M-1109-A CENTER CAP CENTER CAP 20" X 8" HARLEY WHEEL CAP (A208) COBRA IRS HUB (1 EACH) 63 63 63 52 $49.00 $28.00 $27.95 $149.00 M-1007-F500B M-1007-F500C M-1007-G178 M-1007-GTF BLACK FORD RACING WHEEL CHROME FORD RACING WHEEL 1999 POLISHED COBRA WHEEL GT WHEEL FRONT 60 60 57 24 $255.00 $375.00 $220.00 $940.00 M-1124-R M-1125-GT M-1126-A M-1126-B ROTOR HAT FORD GT FRONT ROTORS 5-LUG REAR DRUM/AXLE KIT-28T 11" X 2.25" BRAKE DRUM 15 25 154 158 $599.00 $1,999.00 $468.00 $49.95 M-1007-GTR M-1007-J178 M-1007-K178 M-1007-L2010 GT WHEEL REAR 2003 MUSTANG WHEEL 2001 BLACK MUSTANG WHEEL 2004-05 LIGHTNING WHEEL 24 58 58 61 $999.00 $100.00 $165.00 $340.00 M-1197-T4543 M-1215-A M-1225-B M-1447-B 4WD LOCKNUT SOCKET SET KIT CAR IRS BEARING 8.8" AXLE BEARING & SEAL KIT (PR) “BULLITT” DECKLID EMBLEM 182 154 150 177 $99.95 $37.00 $25.00 $18.95 M-1007-L2010P M-1007-L2085 M-1007-L2085P M-1007-M167 20" X 10" POLISHED WHEEL, F150 20" X 8.5" SILVER WHEEL, F150 20" X 8.5" POLISHED WHEEL, F150 CHROME PONY WHEEL 61 61 61 59 $369.00 $219.00 $339.00 $285.00 M-1447-C M-1447-D46 M-1447-F46 M-1447-M1 2007 SVT FENDER EMBLEMS COBRA DECAL COBRA INTAKE PLAQUE “MACH 1” DECKLID EMBLEM 36 177 177 177 $75.00 $6.95 $9.95 $18.95 M-1007-M178 M-1007-N167 M-1007-R189 M-1007-R189C MACH 1 WHEEL PAINTED PONY WHEEL 2000 COBRA “R” WHEEL 2000 CHROME COBRA “R” WHEEL 58 59 59 59 $155.00 $165.00 $225.00 $345.00 M-1447-SR M-1447-SVT M-1784-MS M-1820-A2 COBRA “SNAKE” FENDER EMBLEMS “SVT” DECKLID EMBLEM 2005-07 MUSTANG QTR WINDOW LOUVERS FORD RACING DECAL (10 PACK) 177 177 48 180 $13.95 $10.95 $189.00 $12.95 M-1007-R54 M-1007-R54C M-1007-R58 M-1007-S177 1995 4-LUG COBRA “R” WHEEL 1995 4-LUG CHROME COBRA “R” 1995 COBRA “R” WHEEL SVT FOCUS WHEEL 59 59 57 62 $175.00 $295.00 $175.00 $150.00 M-1820-B1 M-1820-FR15 M-1822-A2 M-1827-A1 FR COMBO MINI DECAL (25 PACK) FR DIE CUT DECALS 15" (10 PACK) FORD RACING FENDER COVER FORD RACING BANNER 2' X 5' 180 180 181 180 $19.95 $149.00 $10.95 $13.95 M-1007-S177A M-1007-S177B M-1007-S177E M-1007-S179 2004 SVT FOCUS WHEEL BLACK RALLY WHEEL EUROPEAN FOCUS SVT WHEEL 2003 COBRA WHEEL 62 62 62 57 $120.00 $160.00 $120.00 $175.00 M-1827-P1 M-1827-T10 M-1827-T15 M-1827-T20 RACING PENNANT STRING 50' RACING TENT 10' X 10' RACING TENT 10' X 15' RACING TENT 10' X 20' 180 180 180 180 $39.95 $649.00 $825.00 $985.00 M-1007-S179C M-1007-S1885 M-1007-S1885B M-1007-S1885C 2003 CHROME COBRA WHEEL 18" SPARKLE SILVER MUSTANG WHEEL 18" BLACK MUSTANG WHEEL 18" CHROME MUSTANG WHEEL 57 55 55 55 $299.00 $170.00 $170.00 $319.00 M-1827-W10 M-1827-W15 M-1828-F M-1828-FR RACING TENT WALL 10' RACING TENT WALL 15' LIC PLATE-FORD OVAL (12 PACK) LIC PLATE-FORD RAC (12 PACK) 180 180 177 177 $140.00 $185.00 $52.50 $55.00 M-1007-S1895 M-1007-S1895B M-1007-S1895B1 M-1007-T178B 2007 SVT WHEEL 2007-08 BLACK SVT MUSTANG WHEEL 2007 BLACK WHEEL MACHINED LIP 17" X 8" BLACK MUSTANG GT WHEEL 55 55 55 56 $224.00 $224.00 $224.00 $158.00 M-1828-GT M-1828-GTC M-1828-SS304B M-2001-R LICENSE PLATE FRAME LICENSE PLATE FRAME LIC PLATE FRAME BRUSHED PFC FRONT BRAKE PADS 24 24 177 15 $129.00 $129.00 $27.00 $355.00 224 Techline (800) FORD788 FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Part Number Description Pg. No. Sugg. Retail Part Number Description Pg. No. Sugg. Retail M-2004-A M-2005-A M-2005-FR3 M-2005-GT BRAKE COOLING KIT CARBON FIBER BRAKE DUCT KIT 2005-06 MUSTANG HANDLING PACK FORD GT POWER PACK 47 15 43 24 $385.00 $1,199.00 $1,335.00 $999.00 M-3000-G M-3000-L M-3000-T1 M-3000-T3 2004 F150 2" DROP KIT LIGHTNING LOWERING KIT F150 LOWERING KIT 2WD 2004 F150 2WD LOWERING KIT 160 160 160 160 $109.00 $179.00 $450.00 $688.40 M-2005-R M-2006-FR1 M-2006-FR2 M-2006-FR2A RACE BOOSTER 2006 MUSTANG POWER UPGRADE PACKAGE MT/AT 2006 MUSTANG DRAG PACK MANUAL TRANS 2006 MUSTANG DRAG PACK AUTO TRANS 15 41 42 42 $1,799.00 $949.00 $1,479.00 $1,299.00 M-3000-ZX3 M-3002-F4430 M-3002-F4488 M-3052-R SVT FOCUS SUSPENSION KIT F450/550 FRONT AXLE 4.30 F450/550 FRONT AXLE 4.88 GRANDAM CASTER ADJUSTER 188 195 195 15 $305.00 $4,500.00 $4,500.00 $760.00 M-2007-FR1SVT M-2007-FR2SVT M-2007-FR3SVT M-2007-FR3V6 2007 SVT POWER UPGRADE PACK 2007 MUSTANG SVT DRAG PACK 2007 MUSTANG SVT HANDLING PACK V6 HANDLING PACK 31 32 33 51 $1,489.00 $2,799.00 $1,749.00 $1,279.00 M-3075-A M-3075-D M-3075-E M-3075-R LOWER CONTROL ARMS PAIR COBRA FRONT CONTROL ARM SET 2007 SVT FRONT LOWER ARMS GRANDAM FRONT LOWER ARMS 159 159 47 15 $339.00 $175.00 $255.00 $495.00 M-2026-GT M-2134-R M-2200-R M-2209-B FORD GT REAR ROTOR CALIPER MOUNT GRANDAM REAR BRAKE PAD KIT 9" DRUM BRAKE BACK PLATE KIT 25 15 15 158 $1,999.00 $125.00 $205.00 $209.00 M-3130-R2 M-3200-R M-3600-C M-3601-B TIE ROD 2005 W/GREASE FITTING GRANDAM STEERING RACK SVT STEERING WHEEL LEATHER S/WHEEL MUSTANG 15 15 36 181 $199.00 $1,054.03 $425.00 $175.00 M-2300-A M-2300-G M-2300-K M-2300-M FR500 RACING BRAKE KIT DISC BRAKE KIT 9" AXLE 1987-93 SHD DISC BRAKE KIT GT REAR BRAKE BRACKET KIT 15 156 155 156 $3,700.00 $379.00 $2,499.00 $189.00 M-3601-C M-3601-R M-4001-A355 M-4002-B SVT BLACK STITCH WHEEL AND BOOT FR500C STEERING WHEEL MUSTANG GT 3.55 AXLE ASSEMBLY 9" AXLE T-BOLT AND NUT KIT 36 15 152 149 $449.00 $190.00 $1,449.00 $21.00 M-2300-Q M-2300-R M-2300-RS M-2300-S COBRA BRAKE KIT 1994-95 COBRA BRAKE KIT 1996-04 RS/COBRA DISC BRAKE KIT 2007 SVT MUSTANG BRAKE KIT 156 156 189 155 $540.00 $629.00 $2,650.95 $1,489.00 M-4006-B355 M-4006-B373 M-4006-S197 M-4006-T6540 1979-98 MUSTANG 8.8" AXLE ASSEMBLY 1979-98 MUSTANG 8.8" AXLE ASSEMBLY 2005-07 MUSTANG 8.8" AXLE KIT REAR AXLE AND BRG PULLER 152 152 152 182 $1,469.00 $875.00 $1,049.00 $179.95 M-2300-T7299 M-2300-X M-2300-ZX3 M-2300-ZX3R BRAKE CALIPER PIN TOOL COBRA “R” FRONT BRAKE KIT SVT FOCUS BRAKE KIT RALLY BRAKE KIT 182 156 189 189 $21.95 $1,495.00 $1,049.00 $999.00 M-4010-A88 M-4010-T7071 M-4033-G1 M-4050-B 8.8" ALUMINUM IRS HOUSING KIT DANA HOUSING SPREADER 8.8" AXLE GIRDLE 8.8" AXLE INSTALL KIT 154 182 151 152 $559.00 $449.95 $209.00 $35.00 M-2301-5M M-2301-A M-2301-B M-2301-C MUSTANG ALUMINUM FUEL FILL DOOR ACCELERATOR PEDAL PAD BRAKE OR CLUTCH PEDAL PAD (1) DEAD PEDAL PAD 48 177 177 177 $95.00 $19.95 $18.95 $17.95 M-4141-B M-4141-D M-4141-E M-4141-H NODULAR 9" CARRIER ALUMINUM 9" CARRIER NODULAR 9" CARRIER NODULAR 9" CARRIER 148 148 148 148 $399.00 $499.00 $399.00 $395.00 M-2301-E M-2301-F150 M-2301-J M-2301-S ALUMINUM FUEL FILLER DOOR 2004-06 F150 ALUMINUM FUEL DOOR SS COBRA S/C PULLEY COVER SNAKE FAKE FUEL CAP 177 201 162 36 $79.95 $84.00 $229.95 $44.00 M-4141-HS M-4141-J M-4144-B M-4204-A28 STEEL 9" CARRIER NODULAR 9" CARRIER NUT LOCK & BOLT KIT AUBURN DIFF 8.8" 28T 148 148 149 151 $599.00 $499.00 $4.95 $485.00 M-2302-C M-2320-A M-2320-AF M-2320-C COBRA PARKING BRAKE LEVER CALIPER KIT 10TH ANNI F & R 10TH ANN FRONT COBRA CALIPER COBRA CALIPER SET 36 157 157 157 $94.00 $719.00 $519.00 $409.00 M-4204-C31 M-4204-C75 M-4204-F20 M-4204-F288 DETROIT C-LOCKER 8.8" 31T TRAC-LOK DIFF 7.5" 28T TORSEN DIFF MTX-75 TRAC-LOK DIFF 8.8" 28T 15 151 187 151 $750.00 $220.00 $635.00 $215.00 M-2320-CR M-2320-F M-2320-R M-2321-A REAR COBRA CALIPERS PAIR FRONT CALIPERS WITH PADS PAIR REAR CALIPERS WITH PADS PAIR CALIPER HARDWARE KIT 157 157 157 157 $245.00 $479.00 $235.00 $17.00 M-4204-F28A M-4204-F318 M-4204-F3180 M-4204-F318C TRAC-LOK 9" 28T AG TRAC-LOK DIFF 8.8" 31T NON-LOCKING DIFF 8.8" 31T COBRA DIFF 8.8" 31T 151 151 151 151 $425.00 $299.00 $189.00 $299.00 M-2328-C M-2400-C M-2450-A M-2588-T7317 ALUMINUM PROPORTIONING VALVE SEVERE DUTY BRAKE KIT PROPORTIONING VALVE PLUG REAR DISC BRAKE TOOL 158 156 157 182 $54.00 $185.00 $18.00 $99.95 M-4204-F31A M-4204-P31 M-4204-SVTF M-4204-T28 TRAC-LOK 9" 31T AG AUB PRO DIFF 8.8" 31T SVT FOCUS TORSEN TORSEN DIFF 8.8" 28T 151 151 187 151 $425.00 $575.00 $779.00 $589.00 M-2784-M M-2809-A M-2810-A M-3000-D 2005 MUSTANG DECKLID TRIM PARK BRAKE CABLE (REAR) PARK BRAKE CABLE (FRONT) DRAG RACE SUSPENSION KIT 48 157 157 161 $499.00 $27.95 $30.00 $289.00 M-4204-T31 M-4204-TT31 M-4204-TT312 M-4209-F308 TORSEN DIFF 8.8" 31T TRUETRAC LSD 9.75" TRUETRAC LSD 10.25" RING & PINION 8.8" 151 151 151 153 $589.00 $475.00 $585.00 $199.00 www.fordracingparts.com 225 SUGGESTED RETAIL PRICE LIST FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Part Number Description Pg. No. Sugg. Retail Part Number Description Pg. No. Sugg. Retail M-4209-F327 M-4209-F373N M-4209-G355A M-4209-G410A RING & PINION 8.8" RING & PINION 8.8" RING & PINION 8.8" 4.10 RING & PINION 8.8" 153 153 153 153 $210.00 $199.00 TBD $259.00 M-5230-GTA M-5230-HDSR M-5230-L M-5230-L06EC 2005 MUST. GT AXLE-BACK MUFFLER SET 2001-03 F150 HD SPLIT REAR EXHAUST 2004 F150 LIGHTNING STYLE EXHAUST 2006 LIGHTNING STYLE EXT CAB 167 166 166 166 $325.00 $859.00 $639.00 $589.00 M-4209-G410M M-4209-G430M M-4209-G456 M-4209-K410M RING & PINION 8.8" RING & PINION 8.8" RING & PINION 8.8" RING & PINION 10.25" 153 153 153 153 $225.00 $199.00 $245.00 $230.00 M-5230-L2 M-5230-L3 M-5230-R50 M-5230-SGT 1999-04 F150 LIGHTNING 1998-03 F150 LIGHTNING STYLE EXHAUST EXHAUST SYSTEM 2007 SVT MUSTANG MUFFLER SET 49 STATE 166 166 15 31 $625.00 $559.00 $1,575.00 $779.00 M-4209-K456M M-4209-T7794 M-4210-A M-4210-B RING & PINION 10.25” PINION & DIFF BRG PULLER 8.8" RING & PINION INSTALL KIT 8.8" RING & PINION INSTALL KIT 153 182 150 150 $255.00 $999.95 $40.00 $90.00 M-5230-SR M-5230-SVT1 M-5230-T7677 M-5230-V6 2004 F150 4.6L/5.4L SPLIT REAR EXHAUST 2007 SVT MUSTANG MUFFLER SET 50 STATE LEGAL EXHAUST HANGER PLIERS MUSTANG V6 DUAL EXHAUST KIT 166 31 182 165 $750.00 $779.00 $59.95 $664.95 M-4210-C M-4213-A M-4216-A200 M-4216-A210 8.8" RING & PINION INSTALL KIT PINION NUTS (100 PACK) RING GEAR BOLTS (100 PACK) MANUAL FLYWHEEL BOLT (10 PACK) 150 149 149 149 $120.00 $120.00 $90.00 $13.50 M-5251-R M-5300-B M-5300-C M-5300-F 2005 MUSTANG X-PIPE SPRING KIT SPRING KIT SPRING KIT 46 161 161 161 $139.00 $199.00 $199.00 $239.00 M-4216-A300 M-4220-A M-4235-B M-4235-D 8.8" RING GEAR BOLT (SET OF TEN) C-CLIP ELIMINATOR KIT 8.8" AXLE SHAFT 8.8" 31T 4-LUG 1994-98 MUSTANG REAR AXLE SHAFT 171 152 154 154 $8.95 $179.95 $129.95 $315.00 M-5300-G M-5300-K M-5300-L M-5300-M SPRING KIT 2005 MUSTANG SPRING KIT 2007 SVT MUSTANG SPRING KIT FUSION LOWER SPRINGS 161 43 33 161 $265.00 $225.00 $199.00 $230.00 M-4235-E M-4235-F M-4413-A M-4602-G 1999-UP MUSTANG REAR AXLE SHAFT 1979-93 MUSTANG REAR AXLE SHAFT 8.8" IRS BEARING, SEAL KIT ALUMINUM DRIVESHAFT ASSY 154 154 150 154 $315.00 $315.00 $21.95 $280.00 M-5300-N M-5400-A M-5400-Z3 M-5478-C2 V6 MUSTANG SPRINGS PERF HANDLING PACKAGE FOCUS ANTI-ROLL BAR KIT DRIVESHAFT LOOP 3.5" 51 161 187 154 $225.00 $545.00 $325.95 $49.00 M-4602-J M-4614-A M-4614-B M-4614-BR ALUM. D/S ASSY 1996-04 MUST. 4.6 M/T PINION BEARING RET PINION BEARING RET NASCAR BEARING SUPPORT 154 149 149 149 $289.00 $120.00 $105.00 $135.00 M-5478-S197 M-5490-A M-5490-B M-5490-C TWO PC DRIVESHAFT LOOP KIT 2005 MUSTANG ANTI-ROLL BARS 2007 SVT MUSTANG ANTI-ROLL BAR KIT V6 ANTI-ROLL BAR KIT 154 43 33 51 $139.99 $460.00 $460.00 $460.00 M-4635-A M-4663-A100 M-4676-A111 M-4700-A U-JOINT KIT SMALL PARTS KIT PINION OIL SEAL TRAC-LOK KIT 150 149 149 149 $22.50 $28.95 $14.95 $65.00 M-5500-A M-5538-A M-5560-ZX3B M-5560-ZXM CONTROL ARM KIT REAR LOWER CONTROL ARM 2006+ FOCUS SPRING KIT 2000-05 SPEC FOCUS SPRINGS 159 159 188 188 $79.00 $119.00 $215.00 $219.00 M-4700-B M-4700-C M-4841-A M-4841-B 8.8" TRAC-LOK KIT 8.8" CARBON REBUILD KIT 31 SPLINE SLIP YOKE 28 SPLINE SLIP YOKE 150 150 171 171 $82.95 $128.95 $86.00 $55.00 M-5560-ZXM1 M-5638-R M-5649-H M-5649-H1 2006 SPEC FOCUS SPRING BUSHING UPPER REAR ARM 1979-98 MUSTANG LOWER RR ARMS 1999-04 MUSTANG LOWER RR ARMS 188 47 159 159 $219.00 $109.00 $299.00 $299.00 M-4851-B M-5025-A M-5035-ZX3 M-5059-A 2003-04 COBRA PINION FLANGE 2005-07 FRONT LOWER A-ARM BRACE MOTORSPORT SUBFRAME ZX3 TRANS CROSS MEMBER 152 47 187 170 $25.00 $60.00 $230.00 $67.95 M-5649-R M-5970-A M-6000-A302R M-6000-C302 FR500C LOWER ARMS KIT CAR KNUCKLE 302 ENGINE DRESS UP KIT VALVE COVER: COBRA KIT 15 154 130 129 $671.00 $475.00 $112.00 $165.00 M-5059-B M-5200-D234 M-5200-D23C M-5200-ZX3 T-56 COBRA CROSS MEMBER 2.3L FOCUS EXHAUST ZX4 2.3L FOCUS CENTER EXHAUST 2.0L FOCUS EXHAUST ZX3 & 5 170 165 165 165 $41.00 $469.00 $175.00 $385.00 M-6000-D302 M-6000-E302 M-6000-F302 M-6000-J302R VALVE COVER: COBRA EFI VALVE COVER: MUSTANG EFI VALVE COVER VALVE COVERS BLACK RACING EFI 129 129 129 129 $175.00 $165.00 $175.00 $165.00 M-5200-ZX4 M-5200-ZXC M-5230-5GT M-5230-5V6 2.0L SVT FOCUS EXHAUST 2.0L FOCUS CENTER EXIT 2005 MUST. GT AXLE-BACK MUFFLER SET 2005 MUSTANG V6 AXLE-BACK MUFFLER 165 165 165 167 $445.00 $479.00 $549.00 $369.00 M-6000-K302R M-6001-T1726 M-6001-T2004 M-6003-A429 VALVE COVERS POLISHED RACING EFI 1000 LB ENGINE STAND ENGINE HOIST, 4000 LB ENGINE GASKET SET 129 183 183 121 $175.00 $619.95 $514.95 $99.00 M-5230-6L M-5230-73L M-5230-FT M-5230-GT 2003-05 F250/350 6.0L DIESEL EXHAUST 1998-04 F250/350 7.3L DIESEL EXHAUST FUSION I4 TIPS MUFFLER 166 166 167 25 $810.00 $759.00 $64.99 $2,700.00 M-6003-A50 M-6007-347NST M-6007-3V46 M-6007-A46NA ENGINE GASKET SET 347 NASCAR SHORT TRACK ENGINE 4.6L 3V MUSTANG ENGINE 4.6L 4V N/A ALUMINUM LONG BLOCK 121 92 69 69 $95.00 $7,700.00 $6,700.00 $6,500.00 226 Techline (800) FORD788 FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Part Number Description Pg. No. Sugg. Retail Part Number Description Pg. No. Sugg. Retail M-6007-A46SC M-6007-C392FT M-6007-C392RT M-6007-C54 4.6L 4V S/C ALUMINUM LONG BLOCK 351/392 475 HP CRATE ENGINE 351/392 475 HP CRATE ENGINE SVT 5.4L S/C 4V ENGINE 69 $6,700.00 91 $8,600.00 91 $8,600.00 35 $15,999.00 M-6026-R351 M-6026-R451 M-6026-R452 M-6026-S351 PLUG & DOWEL KIT O-RING & DOWEL KIT REPLACEMENT PLUG KIT PLUG KIT-REAR CAM 118 118 118 118 $12.95 $12.95 $26.95 $7.00 M-6007-D347SR M-6007-D351FT M-6007-D351RT M-6007-D392FT SEALED CIRCLE TRACK CRATE 351/385 HP CRATE ENGINE 351/385 HP CRATE ENGINE 351/392 430 HP CRATE ENGINE 92 89 89 90 $7,395.00 $7,600.00 $7,600.00 $7,800.00 M-6038-A460 M-6038-R M-6049-464P M-6049-C460 FOX 460 ENGINE MOUNTS GRANDAM ENGINE MOUNTS 4.6L 4V CNC CYLINDER HEAD RH CYLINDER HEAD 93 15 72 106 $174.95 $645.00 $1,600.00 $895.00 M-6007-D392RT M-6007-J58 M-6007-R50 M-6007-S58 351/392 430 HP CRATE ENGINE 5.8L ENGINE GRANDAM RACE ENGINE 5.8L STREET ROD ENGINE 90 $7,800.00 87 $2,600.00 15 $29,500.00 87 $2,895.00 M-6049-D3 M-6049-D35 M-6049-D46 M-6049-E23A HIGH PORT CYLINDER HEAD W SEAT/GD. NASCAR CYLINDER HEAD CYLINDER HEAD ASSEMBLY 2.3L OHC ALUMINUM CYLINDER HEAD 104 104 71 105 $1,195.00 $1,195.00 $949.95 - M-6007-USAC M-6007-X342 M-6007-XEFM M-6007-Z347 FOCUS MIDGET 2.0L ENGINE 302/342 CRATE ENGINE CRATE ENGINE BOSS 347 CRATE ENGINE 19 87 85 88 $8,995.00 $5,500.00 $4,799.00 $8,995.00 M-6049-E460 M-6049-GT M-6049-I49 M-6049-N351 CYLINDER HEAD CYLINDER HEAD ASSEMBLY BILLET ALUMINUM CYLINDER HEAD FOR 4.9L I-6 CYLINDER HEAD 106 71 105 104 $599.00 $1,999.00 $425.00 M-6007-Z351SR M-6007-Z50Z M-6009-A46NA M-6009-A46SC 351 SEALED RACE ENGINE 5.0L HIGH PERF LONG BLOCK 4.6L 4V N/A ALUMINUM SHORT BLOCK 4.6L 4V S/C ALUMINUM SHORT BLOCK 93 86 69 69 $7,700.00 $6,199.00 $4,500.00 $4,500.00 M-6049-P46 M-6049-SC1 M-6049-SCJ M-6049-SCJA 4.6L PI CYLINDER HEAD HIGH PORT HEAD CYLINDER HEAD CYLINDER HEAD 71 104 105 105 $450.00 $1,195.00 $850.00 $1,050.00 M-6009-A46SCB M-6009-Z347 M-6010-A460 M-6010-A46NA ALUMINUM 4.6L 4V SHORT BLOCK BOSS 347 SHORT BLOCK 460 CYLINDER BLOCK ALUMINUM N/A 4V BLOCK 69 88 101 70 $4,500.00 $4,595.00 $2,095.00 $999.00 M-6049-SCJB M-6049-X306 M-6049-X307 M-6049-Z304D CYLINDER HEAD CYLINDER HEAD CYLINDER HEAD ALUMINUM CYLINDER HEAD 105 103 103 103 $1,050.00 $625.00 $625.00 $549.00 M-6010-A46SC M-6010-A500 M-6010-BOSS302 M-6010-BOSS50 ALUMINUM S/C 4V BLOCK 500 CYLINDER BLOCK 5.0L CYLINDER BLOCK MODULAR 5.0L BLOCK 70 101 99 70 $999.00 $5,950.00 $1,759.00 $2,179.00 M-6049-Z304DA M-6049-Z304P M-6049-ZX3P M-6050-464P CYLINDER HEAD ASSEMBLY CNC PORTED “Z” CYLINDER HEAD 2.OL ZETEC CNC CYLINDER HEAD 4.6L 4V CNC CYLINDER HEAD LH 103 103 191 72 $1,049.00 $899.00 $1,109.00 $1,600.00 M-6010-C450 M-6010-C451 M-6010-C58 M-6010-D46 ALUMINUM V8 SUPER BLOCK ALUMINUM CYLINDER BLOCK CYLINDER BLOCK 4.6L SOHC ROMEO BLOCK 99 99 100 70 $3,500.00 $3,699.00 $1,559.00 $325.00 M-6050-P46 M-6051-A302 M-6051-A427 M-6051-A441 4.6L PI CYLINDER HEAD HEAD GASKET HEAD GASKET HEAD GASKET 71 120 120 120 $450.00 $32.95 $37.95 $44.95 M-6010-GT M-6010-M351 M-6010-M54 M-6010-N351 CYLINDER BLOCK 351 CYLINDER BLOCK 9.2" 5.4L CYLINDER BLOCK 351 CYLINDER BLOCK 9.5" 70 101 70 101 $3,699.00 $1,795.00 $499.00 $1,795.00 M-6051-A50 M-6051-B341 M-6051-B460 M-6051-B51 HIGH PERF 50 GSK KIT HEAD GASKET SET HEAD GASKET SET HEAD GASKET SET FOR 5.0L 121 120 120 120 $105.00 $44.95 $47.95 $48.95 M-6010-R452 M-6010-T50 M-6010-V351 M-6010-W351 NASCAR BLOCK FR500 5.0L BLOCK CYLINDER BLOCK CYLINDER BLOCK 100 70 100 100 $2,750.00 $4,250.00 $1,895.00 $1,895.00 M-6051-CP331 M-6051-R351 M-6051-S331 M-6052-B HEAD GASKET SET HEAD GASKET SET HEAD GASKET SET RADIATOR HOSE KIT 120 120 120 133 $74.95 $70.95 $75.00 $105.95 M-6012-A351 M-6012-B351 M-6014-G500 M-6014-Z304 SLEEVE-CYLINDER SLEEVE-CYLINDER C460 CYLINDER HEAD STUD KIT CYLINDER HEAD STUD KIT 118 118 118 118 $95.00 $95.00 $275.00 $179.95 M-6059-C450 M-6059-D351 M-6065-BOSS M-6065-D289 TIMING CHAIN FRONT COVER FRONT COVER BOSS BLOCK HEAD BOLT SET X HEAD HEAD BOLT KIT 99 123 99 118 $125.95 $65.99 $95.00 M-6015-T4554 M-6023-A460 M-6023-B351 M-6023-C351 TORQUE ANGLE GAUGE 429-460 BILLET TIMING POINTER BILLET TIMING POINTER BILLET TIMING POINTER 183 126 126 126 $15.50 $84.95 $69.95 $69.95 M-6066-CT46 M-6066-CT46HP M-6066-CT46P M-6066-CT46PHP SUPERCHARGER KIT COBRA REPLACEMENT S/C SUPERCHARGER KIT POLISHED COBRA REPLACEMENT S/C 75 75 75 75 $3,359.99 $3,359.99 $3,849.99 $3,849.99 M-6026-A302 M-6026-A460 M-6026-A58 M-6026-B302 PLUG & DOWEL KIT PLUG & DOWEL KIT PLUG & DOWEL KIT PLUG & DOWEL KIT 118 118 118 118 $7.95 $14.95 $13.95 $8.95 M-6066-E05 M-6066-F104 M-6066-F104P M-6066-F105 EXPEDITION S/C CONVER KIT F150 5.4L 3V 2004 S/C KIT F150 5.4L 3V 2004 S/C KIT POLISHED F150 5.4L 3V 2005-06 S/C KIT 194 194 194 194 $320.00 $5,179.99 $5,679.99 $5,179.99 www.fordracingparts.com 227 SUGGESTED RETAIL PRICE LIST FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Part Number Description Pg. No. Sugg. Retail Part Number Description Pg. No. Sugg. Retail M-6066-F105P M-6066-L90 M-6066-L90P M-6066-LR F150 5.4L 3V 2005-06 S/C KIT POLISHED LIGHTNING REPLACEMENT S/C 1999-00 LIGHTNING REPLACEMENT S/C 1999-00 POL LIGHTNING REPLACEMENT S/C 2001-04 194 194 194 194 $5,679.99 $4,049.99 $4,429.99 $3,999.99 M-6303-D46 M-6303-M54 M-6303-T6024 M-6316-A460 COBRA STEEL CRANKSHAFT 5.4L STEEL CRANKSHAFT CRANKSHAFT POSITION TOOL CRANKSHAFT DAMPER 80 80 183 126 $699.95 $350.00 $149.95 $299.95 M-6066-LRP M-6066-M11 M-6066-M117 M-6066-M11P LIGHTNING REPLACEMENT S/C 2001-04 POL 194 2005-06 MUSTANG 500 HP KIT 77 2007 MY 500 HP S/C KIT 77 2005-06 MUSTANG 500 HP POLISHED 77 $4,389.99 $6,079.99 $6,079.99 $6,439.99 M-6316-A50 M-6316-C351 M-6316-D461 M-6316-K351 CRANKSHAFT DAMPER CRANKSHAFT DAMPER CRANKSHAFT DAMPER CRANKSHAFT DAMPER KIT 126 126 126 126 $299.95 $274.95 $325.95 $69.95 M-6066-M11P7 M-6066-M463P M-6066-M463P7 M-6066-M463V 2007 MY 500 HP S/C KIT POLISHED MUSTANG 4.6L 3V S/C KIT POLISHED 2007 MY 400 HP S/C KIT POLISHED MUSTANG 4.6L 3V S/C KIT 77 76 76 76 $6,439.99 $5,475.00 $5,475.00 $5,089.00 M-6316-M50 M-6359-D460 M-6375-A302 M-6375-A302A 5.0L DAMPER KIT CRANK SPACER FLYWHEEL M/T 157/28 STEEL ALUMINUM M/T FLYWHEEL 157/28 126 124 172 172 $69.95 $31.95 $249.95 $425.95 M-6066-M463V7 M-6066-SGT M-6066-ZX3BB M-6067-A 2007 MY 400 HP S/C KIT 2007 SVT SUPERCHARGER UPGRADE KIT JRSC W/ BIG BOOST KIT 4.6L COIL COVER SET 76 75 190 79 $5,089.00 $5,600.00 $2,995.00 $239.95 M-6375-A50 M-6375-B302 M-6375-C302 M-6375-C302A FLYWHEEL C4/AOD 164/50 FLYWHEEL M/T 157/50 FLYWHEEL M/T 157/50 STEEL ALUMINUM M/T FLYWHEEL 157/50 171 172 172 172 $38.95 $104.95 $249.95 $483.95 M-6067-C M-6067-D46 M-6067-GT M-6067-T46 2007 SVT COIL COVERS HEAD CHANGING KIT FORD GT COIL COVER SET HEAD CHANGING KIT 79 121 79 121 $99.00 $115.95 $109.95 $115.95 M-6375-D302 M-6375-D46 M-6375-E302 M-6375-F46 FLYWHEEL M/T 157/0 STEEL FLYWHEEL M/T 4.6L 6 BOLT NODULAR IRON FLYWHEEL C-4 157/50 FLYWHEEL M/T 4.6L 6 BOLT STEEL 172 172 171 172 $249.95 $140.00 $145.00 $289.95 M-6067-T50 M-6099-GT M-6250-B303 M-6250-E303 HEAD CHANGING KIT LH CYLINDER HEAD ASSEMBLY HYD ROLLER CAMSHAFT HYD ROLLER CAMSHAFT 121 71 110 110 $225.00 $1,999.00 $225.00 $225.00 M-6375-G302 M-6375-G46 M-6375-H46 M-6375-R00 FLYWHEEL C-4 164/28 FLYWHEEL M/T 4.6L 8 BOLT STEEL FLYWHEEL A/T 4.6L DOHC FLYWHEEL M/T 4.6L 8 BOLT ALUM 171 172 171 172 $64.95 $319.00 $64.95 $425.95 M-6250-F303 M-6250-X303 M-6250-Z303 M-6252-A203 HYD ROLLER CAMSHAFT HYD ROLLER CAMSHAFT HYD ROLLER CAMSHAFT 2.0L FOCUS CAM KIT 110 110 110 191 $259.00 $189.95 $229.95 $375.00 M-6375-Z460 M-6375-ZX3 M-6379-A M-6379-B FLYWHEEL M/T 460 1979-96 2.0L FOCUS FLYWHEEL 4.6L FLYWHEEL BOLTS AUTO (6) 4.6L FLYWHEEL BOLTS MANUAL (8) 172 19 171 172 $350.00 $99.95 $9.95 $11.95 M-6253-A50 M-6256-T6486 M-6256-T6487 M-6256-Z20 ROLLER CAM CONV. KIT ZETEC CAMSHAFT TIMING KIT MODULAR CAM TIMING KIT ADJUSTABLE CAM SPROCKET 114 183 183 192 $49.95 $19.95 $129.95 $165.00 M-6392-C M-6392-E M-6392-M46 M-6392-R58 UNIV. STL. CLUTCH HSG 5.0L T-5 BELLHOUSING 4.6L 3550 BELLHOUSING CLUTCH HSG ALUMINUM TREMEC 173 173 173 173 $399.00 $199.00 $375.00 $195.00 M-6261-A460 M-6261-C351 M-6261-C450 M-6261-D351 CAMSHAFT BEARINGS ROLLER CAM BEARINGS ROLLER CAM BEARINGS ROLLER CAM BEARINGS 102 102 99 102 $35.00 $26.95 $60.42 $65.95 M-6397-A302 M-6397-A46 M-6500-B303 M-6500-C302 PP BOLT AND DOWEL KIT 11" CLUTCH BOLT KIT TAPPET SET HYD OEM (16) TAPPET SET MECHANICAL (16) 172 172 112 112 $13.95 $13.95 $99.95 $99.95 M-6261-J351 M-6261-R351 M-6268-A302 M-6268-A351 CAMSHAFT BEARINGS CAMSHAFT BEARINGS CHAIN & SPROCKET SET CHAIN & SPROCKET SET 102 102 112 112 $129.95 $17.95 $74.95 $74.95 M-6500-R302 M-6500-S58 M-6505-A351 M-6505-A429 TAPPET SET HYD ROLLER (16) TAPPET SET RETRO HYD ROLLER EXHAUST VALVE EXHAUST VALVE 112 112 115 115 $135.00 $479.00 $14.95 $14.95 M-6268-A390 M-6268-A460 M-6268-B302 M-6268-B429 CHAIN & SPROCKET SET CHAIN & SPROCKET SET CHAIN & SPROCKET SET CHAIN & SPROCKET SET 112 112 112 112 $74.95 $74.95 $74.95 $74.95 M-6505-B304 M-6505-D461 M-6505-G302 M-6505-T46 EXHAUST VALVE EXHAUST VALVE EXHAUST VALVE EXHAUST VALVE 115 115 115 73 $13.00 $10.95 $10.95 $10.95 M-6268-C450 M-6268-F302 M-6268-G302 M-6269-A351 TIMING CHAIN AND SPROCKET CHAIN & SPROCKET SET REPLACEMENT CHAIN THRUST PLATE 99 112 112 112 $699.00 $285.00 $165.00 $39.95 M-6505-ZX3 M-6507-A304 M-6507-A351 M-6507-B429 30 MM FOCUS EXHAUST VALVE INTAKE VALVE INTAKE VALVE INTAKE VALVE 191 115 115 115 $14.00 $14.95 $14.95 $14.95 M-6269-A460 M-6269-C450 M-6287-B302 M-6287-C302 THRUST PLATE THRUST PLATE ECCENTRIC ECCENTRIC 112 99 112 112 $74.95 $83.00 $20.95 $29.95 M-6507-D461 M-6507-J302 M-6507-T46 M-6507-ZX3 INTAKE VALVE INTAKE VALVE INTAKE VALVE 33 MM FOCUS INTAKE VALVE 115 115 73 191 $10.95 $12.95 $10.95 $14.00 228 Techline (800) FORD788 FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Part Number Description Pg. No. Sugg. Retail Part Number Description Pg. No. Sugg. Retail M-6510-Y303 M-6513-A351 M-6513-A50 M-6513-BH VALVE GUIDE KIT (4 PACK) VALVE SPRINGS (16 PACK) VALVE SPRINGS (16 PACK) VALVE SPRINGS (SET OF 16) 115 115 115 115 $17.95 $65.95 $75.95 $195.00 M-6582-B M-6582-B301 M-6582-B303R M-6582-BOSS BLACK COBRA VALVE COVER SET BLACK MUSTANG VALVE COVER SET CHROME VALVE COVER SET BOSS VALVE COVER SET 130 128 128 127 $169.95 $109.95 $54.95 $209.00 M-6513-T46 M-6513-ZX3E M-6514-A50 M-6514-B50 HI LIFT 4.6L VALVE SPRINGS (32) ZETEC VALVE SPRING SET VALVE SPRING RETAINERS (16) VALVE SPRING RETAINERS (16) 73 191 114 114 $339.95 $240.00 $48.95 $69.00 M-6582-BOSS302 M-6582-C M-6582-C351R M-6582-C460 BOSS 302 VALVE COVER SET COBRA FORD GT BLUE CHROME VALVE COVER SET POLISHED RACING VALVE COVER SET 127 35 130 130 $209.00 $379.00 $54.95 $154.95 M-6514-BH M-6518-B351 M-6518-BH M-6527-C311 VALVE SPRING RETAINER (SET OF 16) VALVE KEEPERS V-8 (SET OF 16) VALVE LOCKS V-8 (SET OF 16) ROCKER ARM STUDS (16) 114 114 114 114 $59.00 $21.95 $27.00 $59.00 M-6582-C464 M-6582-C543V M-6582-CC M-6582-D302 CHROME 4.6L 4V CAM COVERS CHROME 3V VALVE COVER SET SVT SMOKED CHROME VALVE COVERS CHROME VALVE COVER SET 79 79 35 128 $499.00 $399.00 $679.00 $244.95 M-6527-D311 M-6529-A302 M-6536-BH M-6536-E351 ROCKER ARM STUDS (16) ROCKER ARM SHIM KIT VALVE SPRING LOCATOR (SET OF 16) VALVE SPRING SEAT (16) 114 114 114 114 $46.95 $8.95 $48.00 $50.95 M-6582-E302P M-6582-F301 M-6582-F302 M-6582-F303 POLISHED RACING VALVE COVER SET POLISHED MUSTANG VALVE COVER SET BLACK COBRA VALVE COVER SET POLISHED COBRA VALVE COVER SET 128 128 128 128 $104.95 $124.95 $119.95 $139.95 M-6536-SCJ M-6550-GT M-6550-T46 M-6564-A351 SCJ VALVE SPRING CUP SET SUPERCHARGER CAMS 4V HIGH LIFT CAM KIT ROLLER ROCKER SET 114 73 73 113 $42.95 $550.00 $1,699.95 $325.95 M-6582-L302 M-6582-R302 M-6582-R351 M-6582-R460 BLACK RACING VALVE COVER SET CHROME VALVE COVER SET CHROME VALVE COVER SET CHROME VALVE COVER SET 128 128 130 130 $104.95 $365.00 $215.00 $315.00 M-6564-A460 M-6564-A50 M-6564-AS51 M-6564-AS60 ROLLER ROCKER SET ROLLER ROCKER SET ROLLER ROCKER PAIR ROLLER ROCKER PAIR 113 113 113 113 $369.95 $289.00 $53.95 $59.95 M-6582-Z351 M-6584-A452 M-6584-A460 M-6584-A50 POLISHED RACING VALVE COVER SET GASKET SET-ROCKER COVER VALVE COVER GASKET SET VALVE COVER GASKET SET-5.OL 130 119 119 119 $149.00 $50.00 $27.95 $27.95 M-6564-B351 M-6564-BS51 M-6564-C351 M-6564-CS51 ROLLER ROCKER SET ROLLER ROCKER PAIR ROLLER ROCKER SET ROLLER ROCKER PAIR 113 113 113 113 $399.00 $59.95 $399.95 $52.95 M-6584-ZX3 M-6588-A50 M-6600-A460 M-6600-B3 2.0L CAM COVER GASKET ROCKER CHANNEL KIT (8 PACK) HIGH VOLUME OIL PUMP HIGH VOLUME OIL PUMP 19 114 116 116 $23.95 $21.95 $85.95 $65.95 M-6564-D351 M-6564-DS51 M-6564-E351 M-6564-ES51 ROLLER ROCKER SET ROLLER ROCKER SET ROLLER ROCKER SET ROLLER ROCKER PAIR 113 113 113 113 $325.95 $42.95 $349.95 $42.95 M-6600-D2 M-6600-D46 M-6600-M50 M-6600-T6492 HIGH VOLUME OIL PUMP HIGH VOLUME OIL PUMP OIL PUMP ENGINE PRE-OILER 116 79 116 183 $55.95 $55.95 $35.95 $239.95 M-6564-F351 M-6564-K351 M-6566-D311 M-6566-D351 ROLLER ROCKER SET ROLLER ROCKER SET GUIDE PLATE (8 PACK) GUIDE PLATE (8 PACK) 113 113 115 115 $349.95 $349.95 $25.95 $52.00 M-6600-ZX3 M-6605-A341 M-6605-A427 M-6605-A429 2.0L FOCUS OIL PUMP OIL PUMP SHAFT HD OIL PUMP SHAFT HD OIL PUMP SHAFT HD 19 116 116 116 $39.95 $16.95 $16.95 $16.95 M-6566-SCJ M-6566-Z304D M-6571-A50 M-6582-3VB GUIDE PLATE (8 PACK) PUSHROD GUIDE PLATES (8 PACK) VALVE STEM SEAL (SET OF 16) 3V VALVE COVER BLUE 115 115 115 79 $34.95 $39.00 $30.00 $269.00 M-6605-B302 M-6622-BOSS302 M-6642-S101 M-6670-A50 OIL PUMP SHAFT HD BOSS BLOCK OIL PUMP PICKUP TUBE OIL COOLER FOX CONV. KIT-5.0L 116 117 116 117 $16.95 $110.00 $136.00 $289.00 M-6582-3VBLK M-6582-3VS M-6582-A M-6582-A301R 3V VALVE COVER BLACK WRINKLE 3V VALVE COVER SILVER VALVE COVER COBRA SET VALVE COVER SET 79 79 128 128 $269.00 $269.00 $115.95 $139.95 M-6675-A460 M-6675-A50 M-6675-A58 M-6675-D46 460 FOX OIL PAN KIT 5.0L OIL PAN KIT 351 FOX OIL PAN KIT 4.6L OIL PAN CORE 117 117 117 80 $150.00 $110.00 $149.95 $37.00 M-6582-A302R M-6582-A341R M-6582-A342R M-6582-A351R VALVE COVER SET VALVE COVER SET VALVE COVER SET EFI TRUCK VALVE COVER SET 128 130 130 129 $115.95 $109.95 $129.95 $145.95 M-6675-L54 M-6687-A302 M-6687-A390 M-6701-A460 DEEP SUMP TRUCK OIL PAN 302 WINDAGE TRAY 390 WINDAGE TRAY REAR MAIN SEAL 80 117 117 119 $349.95 $64.95 $39.95 $18.00 M-6582-A390R M-6582-A427 M-6582-A429R M-6582-A54 CHROME VALVE COVER SET POLISHED COBRA VALVE COVER SET CHROME VALVE COVER SET BLUE VALVE COVERS 4V 130 130 130 79 $54.95 $179.95 $54.95 $349.00 M-6701-B302 M-6701-B351 M-6701-T7786 M-6710-A351 REAR MAIN SEAL REAR MAIN SEAL REAR MAIN SEAL INSTALLER 1 PC OIL PAN GASKET 119 119 184 121 $11.95 $11.95 $139.95 $18.95 www.fordracingparts.com 229 SUGGESTED RETAIL PRICE LIST FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Part Number Description Pg. No. Sugg. Retail Part Number Description Pg. No. Sugg. Retail M-6710-A460 M-6710-A50 M-6731-FL1995 M-6731-FL1A 7.5L 1PC OIL PAN GSKT OIL PAN GASKET-5.0L CASE OF 12 CM-6731-FL1995 CASE OF 12 CM-6731-FL1A 121 121 116 116 $22.95 $18.95 $239.95 $165.00 M-7213-B M-7213-D M-7213-E M-7213-G T-56 SHIFT KNOB 5 SPEED CARBON SHIFT KNOB CARBON LEATHER SHIFT KNOB 5 SPEED COBRA SHIFT KNOB 168 168 168 168 $32.95 $65.00 $29.00 $45.00 M-6731-FL299 M-6731-FL300 M-6731-FL400 M-6731-FL784 CASE OF 12 CM-6731-FL299 CASE OF 12 CM-6731-FL300 CASE OF 12 CM-6731-FL400 CASE OF 12 CM-6731-FL784 116 116 116 116 $239.95 $165.00 $165.00 $239.95 M-7213-GT M-7213-H M-7277-A M-7277-B SHIFT KNOB MACH 1 SHIFT KNOB SHIFT BOOT SHIFTER BOOT CARBON 24 168 169 169 $89.00 $54.00 $81.00 $49.95 M-6731-FL820 M-6750-A302 M-6750-B302 M-6750-C303 CASE OF 12 CM-6731-FL820 DIPSTICK & TUBE DIPSTICK & TUBE DIPSTICK & TUBE 116 132 132 132 $165.00 $13.50 $15.95 $27.95 M-7343-A M-7515-A M-7548-A M-7550-A302N MTX 4.06 GEAR SET CLUTCH LEVER SN95 CLUTCH RELEASE BEARING 10.4" CLUTCH DISC 187 175 175 174 $149.95 $20.00 $35.00 $69.00 M-6750-D303 M-6750-E303 M-6766-A302 M-6766-B302 TRANS DIPSTICK & TUBE TRANS DIPSTICK & TUBE BREATHER CAP BREATHER CAP 132 132 131 131 $27.95 $27.95 $8.35 $7.50 M-7550-T302 M-7550-X302 M-7553-A302 M-7553-B302 CLUTCH DISC 26-10.5 CLUTCH DISC LINKAGE KIT ADJ CLUTCH CABLE KIT 174 174 175 175 $159.00 $145.00 $50.00 $98.00 M-6766-G302 M-6766-GT M-6766-H302 M-6766-K302 BREATHER CAP OIL FILL CAP BREATHER CAP BREATHER CAP 131 131 131 131 $7.50 $60.00 $14.95 $20.95 M-7553-C302 M-7553-D302 M-7553-E302 M-7553-T7646 SERVICE CABLE CABLE AND QUADRANT KIT SERVICE CABLE 1996-04 HYD CLUTCH COUPLING TOOL 175 175 175 184 $46.00 $98.00 $46.00 $11.95 M-6766-MP46 M-6799-A302 M-6799-R351 M-6880-A50 PAINTED BILLET OIL FILL CAP OIL RESTRICTOR KIT OIL RESTRICTOR KIT 90 DEG OIL FILTER ADAPT 131 99 99 116 $44.00 $14.95 $18.95 $75.00 M-7554-A M-7560-A302N M-7560-C302N M-7560-D46 BULKHEAD ADJUSTER CLUTCH KIT 10.4" CLUTCH KIT 2002-04 COBRA CLUTCH KIT 175 174 174 174 $37.95 $239.00 $249.00 $269.00 M-6880-S M-6881-C100 M-6892-F M-6949-3V HD OIL FILTER MOUNT OIL FILTER ADAPTOR KIT BREATHER AND PCV GROMMETS MUSTANG GT INTAKE SHROUD 116 116 131 45 $45.00 $79.00 $3.50 $69.95 M-7560-T46 M-7563-A302N M-7563-B302 M-7563-C302N CLUTCH ASSEMBLY 26-11.0 10.4" PRESSURE PLATE 10.5" CENT CLUTCH 10.4" PRESSURE PLATE 174 174 174 174 $369.00 $108.00 $209.00 $139.00 M-7000-A M-7003-F M-7003-G M-7003-H T5 TRANS REBUILD KIT T-56 6-SPEED TRANS T-56 MECH. SPEEDO 1996-98 T-56 5.0L TRANS 169 170 170 170 $255.00 $2,555.00 $2,555.00 $2,555.00 M-7563-Z3 M-7583-A M-7600-A M-7600-B FOCUS 2.0L ZETEC CLUTCH KIT DOUBLE HOOK QUADRANT SB ROLLER PILOT BEARING 4.6L ROLLER PILOT BEARING 187 175 175 175 $225.00 $41.00 $10.95 $10.95 M-7003-R58C M-7003-R58H M-7003-R58W M-7003-T56R TREMEC 5SPD EXTRA HD TRANS TRANS TKO 600 HDO TREMEC 5SPD HD TRANS T-56 RACING GEAR BOX 170 170 169 15 $2,079.00 $2,079.00 $1,995.00 $8,500.00 M-7600-T7318 M-7843-A M-7843-C M-7843-V8 PILOT BEARING PULLER KIT BILLET FORD OVAL 7-1/4" BILLET FORD OVAL 9" STICK-ON CHROME V-8 BADGE 184 200 201 177 $99.95 $39.00 $42.00 $9.95 M-7003-Z M-7050-A M-7050-B M-7060-A54 SHD T5 TRANS BEARING RETAINER BEARING RETAINER 2007 COBRA CLUTCH KIT 169 169 169 174 $1,469.00 $41.00 $43.95 $1,199.00 M-8005-C M-8005-C03 M-8005-P221 M-8005-R ALUMINUM RADIATOR, 1979-93 HIGH PERFORMANCE RADIATOR HIGH PERFORMANCE RADIATOR C & R RADIATOR KIT 133 133 197 15 $310.00 $325.00 $660.00 $1,350.00 M-7060-C46 M-7095-GT M-7095-SR M-7195-T 11" CLUTCH UPGRADE KIT TRANSAXLE COOLER KIT TRANS OIL COOLER E40D/4R100 DEEP ALUMINUM PAN 174 25 133 176 $299.00 $1,279.00 $57.00 $225.00 M-8005-S197 M-8006-GT M-8501-A50 M-8501-B50C HIGH PERFORMANCE RADIATOR BILLET COOLANT OVERFLOW CAP WATER PUMP KIT WATER PUMP POWDERCOAT CHROME 133 133 123 123 $769.00 $71.95 $205.00 $280.00 M-7210-B M-7210-GT M-7210-M M-7210-N 2007 SVT SHORT THROW SHIFTER TRANS SHIFT LEVER T-5/T-45 HURST SHIFTER T-5/T-45 SHIFTER 168 24 168 168 $205.00 $589.00 $185.00 $179.00 M-8501-C460 M-8501-C50 M-8501-D50 M-8501-E351S WATER PUMP WATER PUMP SHORT SERPENTINE WATER PUMP WATER PUMP 122 122 123 123 $215.00 $48.95 $55.00 $140.00 M-7210-T1 M-7210-T56 M-7210-V M-7213-A 2005 MUST SHIFTER W/KNOB T-56 SHIFTER V6 SHORT THROW SHIFTER SHIFT KNOB 168 168 168 168 $269.00 $189.00 $269.00 $39.95 M-8501-F351C M-8501-G351 M-8501-L54 M-8501-R351 WATER PUMP POWDERCOAT CHROME WATER PUMP ELECTRIC WATER PUMP WATER PUMP ASSEMBLY 123 122 123 122 $289.00 $48.95 $149.00 $260.00 230 Techline (800) FORD788 FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Pg. No. Sugg. Retail HEADERS COATED F150 5.4L 2V 2004-05 F150 5.4L HEADERS 3V EXHAUST HEADERS HEADERS/COLLECTOR MUFFLER 164 164 25 25 $525.00 $244.00 $2,510.00 $4,395.00 M-9430-P50 M-9430-P51 M-9430-S197 M-9430-S197C HEADER 1986-93 GT-40P HEADER 1986-93 COATED GT-40P HEADERS 2005 MUSTANG HEADERS 2005 MUSTANG COATED 164 164 164 164 $299.00 $395.00 $359.00 $559.00 $29.95 $29.95 $70.00 $39.95 M-9430-SD682 M-9430-SD682C M-9430-SD683 M-9430-SD683C SD 6.8L HEADERS 2V SD 6.8L HEADERS 2V COATED SD 6.8L HEADERS 3V SD 6.8L HEADERS 3V COATED 164 164 164 164 $309.00 $379.00 $309.00 $379.00 125 125 190 190 $105.00 $89.95 $499.00 $499.00 M-9430-SVTFC M-9430-T50 M-9430-T58 M-9430-ZX3L COATED SVTF HEADER HEADER F-SERIES 5.0L HEADER F-SERIES 5.8L 2.0L FOCUS LONG TUBE HEADER 164 164 164 164 $375.00 $350.00 $469.00 $340.00 ATL FUEL SYSTEM 2005-06 MUSTANG BIG BOOST KIT 2007 MY MUSTANG BIG BOOST FUEL PRESS GAUGE 2 1/16" 15 76 76 179 $3,200.00 $2,099.99 $2,099.99 $59.95 M-9430-ZX3LC M-9432-A50 M-9432-A51 M-9432-A54 COATED LONG TUBE HEADER LOC HEADER BOLT 3/4" SET LOC HEADER BOLT 1" SET LOC HEADER BOLT 8 MM-1.25 SET 164 164 164 164 $485.00 $63.00 $63.00 $57.95 M-9275-A258 M-9278-A200 M-9278-A258 M-9280-T7337 FUEL PRESS GAUGE 2 5/8" OIL PRESS GAUGE 2 1/16" OIL PRESS GAUGE 2 5/8" FUEL LINE DISCONNECT TOOL 179 179 179 185 $59.95 $55.95 $59.95 $13.95 M-9439-A302 M-9439-A50 M-9439-B302 M-9439-G460 INTAKE MANIFOLD GASKET INTAKE MANIFOLD GASKET INTAKE MANIFOLD GASKET INTAKE GASKET SET 119 119 119 119 $10.00 $33.00 $13.00 $34.00 M-9351-A302 M-9407-C46 M-9407-C50 M-9407-GT05 BLOCKOFF PLATE COBRA DUAL FUEL PUMP HIGH FLOW FUEL PUMP COBRA DUAL FUEL PUMP KIT 131 140 140 140 $5.95 $420.00 $259.00 $780.00 M-9439-H460 M-9448-3V M-9448-A351 M-9448-A462 INTAKE GASKET SET HEADER GASKET SET HEADER GASKET N351 HEADER GASKET 4.6L 2V 119 164 119 164 $34.00 $319.00 $13.95 $19.95 M-9407-L54 M-9424-A302P M-9424-C460 M-9424-D302 LIGHTNING FUEL PUMP INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD 197 108 108 108 $325.00 $230.00 $450.00 $275.00 M-9448-A464 M-9448-B302 M-9461-B50 M-9464-A50 HEADER GASKET 4.6L 4V HEADER GASKET 5.0L OFF ROAD GT-40 INTAKE EGR SPACER GASKET (5 PACK) 164 164 107 107 $20.95 $8.95 $269.00 $27.95 M-9424-D451 M-9424-D452 M-9424-D453 M-9424-E302C INTAKE MANIFOLD - 4V INTAKE MANIFOLD - 4V NASCAR V8 MANIFOLD INTAKE MANIFOLD POWDERCOAT CHROME 109 109 109 108 $565.00 $545.00 $525.00 $339.00 M-9474-P65E M-9474-P70E M-9474-P75E M-9486-A50 65 MM EGR SPACER 70 MM EGR SPACER 75 MM EGR SPACER UPPER TO LOWER GASKET (5 PACK) 107 107 107 106 $54.00 $54.00 $54.00 $20.00 M-9424-F302 M-9424-G429 M-9424-H429 M-9424-J429 INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD 108 108 108 108 $199.00 $350.00 $350.00 $265.00 M-9486-A51 M-9486-A52 M-9486-A53 M-9500-T7798 INTAKE SPACER INTAKE SPACER INTAKE SPACER TRANSLINE DISCONNECT TOOL 106 106 106 184 $55.95 $55.95 $79.95 $53.95 M-9424-P46 M-9424-V351 M-9424-Z51 M-9424-Z51P 4.6L PI INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD KIT POLISHED INTAKE MANIFOLD KIT 78 108 107 107 $209.00 $310.00 $430.00 $579.00 M-9593-A302 M-9593-B302 M-9593-C302 M-9593-E303 24# FUEL INJECTOR (8 PACK) 30# FUEL INJECTOR (8 PACK) 19# FUEL INJECTOR (8 PACK) 160# FUEL INJECTOR (8 PACK) 134 134 134 134 $275.00 $239.00 $265.00 $495.00 M-9424-ZX3R M-9430-C54 M-9430-C54C M-9430-E462 FR200 INTAKE BOLT ON 2007 SVT SHORTY HEADER 2007 SVT SHORTY HEADERS COATED 4.6L 2V HEADER 192 164 164 164 $799.00 $649.00 $799.00 $429.00 M-9593-F302 M-9593-G302 M-9593-LU60 M-9593-M23 42# FUEL INJECTOR (8 PACK) 47# FUEL INJECTOR (EV14) 60 LB/HR INJECTOR (8 PACK) 23# FUEL INJECTOR (8 PACK) 134 134 134 134 $390.00 $499.00 $519.00 $295.00 M-9430-E463 M-9430-E464 M-9430-E465 M-9430-F542 4.6L 2V COATED HEADER 4.6L 4V HEADER 4.6L 4V COATED HEADER HEADERS, F150 5.4L 2V 164 164 164 164 $569.00 $469.00 $599.00 $244.00 M-9593-M39 M-9593-T46 M-9593-T6551 M-9593-T7211 39# FUEL INJECTOR (8 PACK) 34# FUEL INJECTOR (8 PACK) FUEL PRESSURE GAUGE TOOL FUEL PRESSURE GAUGE & HOSE 134 134 184 184 $395.00 $315.00 $299.95 $99.95 Part Number Description Pg. No. Sugg. Retail Part Number M-8501-R352 M-8509-A51 M-8509-CM M-8509-D462 WATER PUMP HOUSING KIT UNDERDRIVE PULLEY SET BILLET V-PULLEYS, 1 GROOVE UNDERDRIVE PULLEY SET 122 124 124 125 $475.00 $120.00 $184.95 $175.00 M-9430-F542C M-9430-F543 M-9430-GT M-9430-GTX M-8509-DM M-8509-EM M-8509-M M-8510-A351 BILLET V-PULLEYS, 1 GROOVE BILLET V-PULLEYS, 2 GROOVE UNDERDRIVE PULLEYS CRANK PULLEY SPACER 124 124 123 124 $184.95 $184.95 $234.95 $29.95 M-8510-B351 M-8510-C351 M-8511-A351 M-8511-A50 CRANK PULLEY SPACER CRANK PULLEY SPACER ACCESSORY DRIVE KIT P.S. A.C. ELIMINATOR KIT 124 124 125 125 M-8511-B351 M-8604-A50 M-9000-SVTF M-9000-ZX3 ACCESSORY DRIVE KIT A.C. COMP. A/P IDLER SVT FOCUS JRSC UPGRADE JRSC BIG BOOST KIT M-9002-R M-9066-M11 M-9066-M117 M-9275-A200 Description www.fordracingparts.com 231 SUGGESTED RETAIL PRICE LIST FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Pg. No. Sugg. Retail 4.6L 4V IGNITION WIRE SET RED 4.6L 2V F150 WIRE SET BLUE 9 MM IGNITION WIRE SET YELLOW DISTRIBUTOR HOLDDOWN CLAMP 145 145 145 129 $119.95 $75.95 $48.95 $7.95 M-12297-B02 M-12297-B03 M-12297-B04 M-12297-B14 BLUE 2-WIRE DIVIDER (4 PACK) BLUE 3-WIRE DIVIDER (4 PACK) BLUE 4-WIRE DIVIDER (4 PACK) BLUE WIRE LOOM PAIR 145 145 145 145 $6.00 $6.25 $6.50 $8.95 $195.00 $7.59 $7.59 $20.00 M-12297-L900 M-12297-L901 M-12297-L903 M-12390-A STREET ROD LOOM SET W/FORD STREET ROD LOOM SET W/V-8 STREET ROD LOOM SET W/SVO DISTRIBUTOR DRIVEN GEAR 145 145 145 146 $99.95 $99.95 $99.95 $27.00 132 107 107 107 $20.00 $240.00 $179.00 $189.00 M-12390-B M-12390-C M-12390-D M-12390-E DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR 146 146 146 146 $45.00 $55.00 $27.00 $55.00 70 MM THROTTLE BODY-POLISHED 70 MM THROTTLE BODY 75 MM THROTTLE BODY-POLISHED 75 MM THROTTLE BODY 107 107 107 107 $179.00 $189.00 $179.00 $189.00 M-12390-F M-12390-G M-12390-H M-12390-J DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR 146 146 146 146 $27.00 $27.00 $52.00 $75.00 M-9926-ZX3R M-9933-D462 M-10300-T7830 M-10835-A200 70 MM FOCUS THROTTLE BODY THROTTLE BODY GASKET (5 PACK) PWR STRG PUMP PULLEY TOOL BATTERY VOLT GAUGE 192 78 184 179 $419.00 $11.50 $179.95 $46.95 M-12390-K M-12390-L M-12405-3V0 M-12579-L54 DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR SPARK PLUG 3V 0DEG 90 MM LIGHTNING AIR METER 146 146 46 140 $135.00 $135.00 $140.00 $199.95 M-10835-A258 M-10883-A200 M-10883-A258 M-10885-A200 BATTERY VOLTAGE GAUGE 2 5/8" WATER TEMP GAUGE 2 1/16" WATER TEMP GAUGE 2 5/8" PYROMETER GAUGE 179 179 179 179 $50.95 $79.95 $79.95 $169.00 M-12637-T50H M-12650-BR50 M-13006-L03 M-13086-B FUEL CHARGE HARNESS ENGINE CONTROL MODULE LIGHTNING HEADLIGHT SET 1996-04 MUSTANG FLOOR MAT PAIR 15 15 201 180 $635.00 $645.00 $275.00 $34.00 M-10898-A100 M-11000-A50 M-11000-B51 M-11572-GT PERF INFO GAUGE MINI-STARTER HI-TORQUE 1.4 KW MINI-STARTER FORD GT START BUTTON KIT FOR MUSTANG 179 86 86 45 $209.00 $204.00 $279.00 $122.00 M-13086-C M-13086-F M-13200-L02 M-13208-C 2005-06 MUSTANG FLOOR MAT PAIR 2005 F250 FR FLOOR MAT PAIR LIGHTNING PARK LAMP SET MUSTANG SVT SCUFF PLATES 180 180 201 49 $34.00 $39.00 $149.00 $189.00 M-11620-H200 M-11622-A200 M-11622-A258 M-12044-A2 HARLEY VACUUM/BOOST GAUGE KIT VACUUM/BOOST GAUGE 2 1/16" VACUUM/BOOST GAUGE CHROME COIL BRACKET 179 179 179 129 $125.00 $63.95 $65.95 $7.95 M-13208-F100 M-13208-LFR M-13208-LSVT M-13208-M100 F150 EXT CAB ENTRY GUARD (SET OF 4) 2005-UP MUST LIGHTED FR SILL PLATES 2005-UP MUST LIGHTED SVT SILL PLATES STAINLESS STEEL MUSTANG ENTRY GUARDS 200 49 49 49 $159.00 $275.00 $275.00 $109.00 M-12071-A50 M-12071-C302 M-12071-K302 M-12071-L302 EFI WIRE HARNESS MAIN HARNESS RELAY PACKAGE 5.0L ENGINE HARNESS 141 141 141 141 $650.00 $225.00 $109.95 $359.00 M-13404-L01 M-14464-A8 M-14464-U2J M-15000-A961 LIGHTNING TAILLIGHT SET FUEL INJECTOR ADAPTOR (8 PACK) INJECTOR ADAPTER (8 PACK) U2J CLOCK MASTERPIECE GAUGE 201 134 134 178 $149.95 $54.95 $64.00 $59.95 M-12106-A302 M-12106-B302 M-12259-C301 M-12259-C302 DURASPARK CAP KIT EFI DISTRIBUTOR CAP KIT 9 MM IGNITION WIRE SET BLUE 9 MM IGNITION WIRE SET BLUE 144 144 145 145 $26.95 $26.95 $48.95 $48.95 M-15000-B961 M-15000-C961 M-16600-SVTC M-16612-C CLOCK MASTERPIECE GAUGE CLOCK MASTERPIECE GAUGE 2005 GT500 REAR WING SVT HOOD 178 178 36 36 $59.95 $59.95 $229.00 $549.00 M-12259-C460 M-12259-C462 M-12259-C464 M-12259-M301 9 MM IGNITION WIRE SET BLUE 4.6L 2V IGNITION WIRE SET BLUE 4.6L 4V IGNITION WIRE SET BLUE 9 MM IGNITION WIRE SET BLACK 145 145 145 145 $48.95 $82.95 $119.95 $48.95 M-16612-R00 M-16612-R58 M-16620-C M-16620-R 2000 COBRA “R” HOOD 1995 COBRA “R” HOOD 2000 COBRA “R” SEATS-CLOTH FR500C RACE CAR SEAT 163 163 163 15 $525.00 $525.00 $2,599.00 $1,050.00 M-12259-M302 M-12259-R301 M-12259-R460 M-12259-R462 9 MM IGNITION WIRE SET BLACK 9 MM IGNITION WIRE SET RED 9 MM IGNITION WIRE SET RED 4.6L 2V IGNITION WIRE SET RED 145 145 145 145 $48.95 $48.95 $48.95 $82.95 M-16700-A M-17080-T1733 M-17080-T1772 M-17360-A201 HOOD LATCH KIT 3 TON JACK STANDS 3 TON JACK STANDS FR RACING TACHOMETER 181 185 185 179 $34.95 $119.95 $32.95 $235.95 Description Pg. No. Sugg. Retail Part Number M-9593-T7448 M-9600-A302R M-9600-C302 M-9600-E302 FUEL INJECTOR CLEAN TOOL 13" AIR CLEANER OVAL AIR CLEANER OVAL AIR CLEANER 184 132 132 132 $199.95 $50.95 $94.95 $94.95 M-12259-R464 M-12259-T462 M-12259-Y301 M-12270-A302 M-9600-K302 M-9600-M302 M-9603-GT06 M-9603-SVT07 OVAL AIR CLEANER AIR CLEANER-MUSTANG 90 MM CAK W/PREMIUM CAL MT/AT SVT MUSTANG 113 MM CAK W/P 132 132 41 31 $94.95 $69.95 $709.00 $829.00 M-9659-SVTF M-9697-A M-9697-C M-9697-E SVT AIRBOX & SNORKEL WING NUT-FORD WING NUT-MUSTANG BILLET FORD AIR CLEANER NUT 190 132 132 132 M-9697-F M-9926-D462 M-9926-P65E M-9926-P65L BILLET FR CLEANER NUT 70 MM 4.6L THROTTLE BODY 65 MM THROTTLE BODY-POLISHED 65 MM THROTTLE BODY M-9926-P70E M-9926-P70L M-9926-P75E M-9926-P75L Part Number 232 Techline (800) FORD788 Description FOR THE MOST UP-TO-DATE PRICING AND TECH INFO VISIT www.fordracingparts.com Part Number Description Pg. No. Sugg. Retail M-17360-A961 M-17360-B961 M-17831-F M-17835-F GOLD TACHOMETER CHROME/WHITE TACHOMETER SVT FOCUS FRONT FASCIA SVT FOCUS REAR FASCIA 178 178 186 186 $99.95 $99.95 $399.00 $325.00 M-17835-F1 M-18000-A M-18000-C M-18000-Z2 SVT FOCUS CENTER EXHAUST INSERT 2005 MUST DAMPER KIT 2007 SVT DAMPERS KIT ZX2-R STRUT (SET OF 4) 165 43 33 188 $175.95 $465.00 $889.00 $215.00 M-18000-ZX3 M-18000-ZX3B M-18000-ZXM M-18000-ZXM1 FOCUS SVT DAMPER KIT 2006 FOCUS DAMPER KIT 2000-05 SPEC FOCUS DAMPERS 2006 SPEC FOCUS DAMPER KIT 188 188 188 188 $199.00 $195.00 $549.00 $549.00 M-18120-R M-18120-RFL M-18120-RFR M-18120-RRL DYNAMIC DAMPERS DAMPER FT LEFT SIDE DAMPER FT RIGHT SIDE DAMPER RR LEFT SIDE 15 15 15 15 $5,999.00 $1,979.00 $1,979.00 $1,489.00 M-18120-RRR M-18183-A M-18183-R M-19017-A961 DAMPER RR RIGHT SIDE 2007 SVT FRONT STRUT MOUNT PAIR GRANDAM CAMBER PLATES 5 GAUGE KIT GOLD 15 34 15 178 $1,489.00 $66.00 $502.00 $265.00 M-19017-B961 M-19017-C961 M-19061-T7575 M-19216-A50 5 GAUGE KIT CHROME/WHITE 5 GAUGE KIT CHROME/BLACK FORD RADIO REMOVAL TOOL 1994-95 5.0L A/C DELETE KIT 178 178 185 125 $265.00 $265.00 $7.00 $60.00 M-19216-D46 M-19515-A M-19543-C M-19546-A12 1996-04 4.6L A/C DELETE KIT HIGHWAY SAFETY KIT SVT TIRE INFLATOR FRICTION MODIFIER (CASE OF 12) 125 181 62 151 $48.95 $455.00 $220.00 $42.00 M-19579-A12 M-19623-T7238 M-20201-A50 M-20201-C CAM LUBE (CASE OF 12) A/C LINE DISCONNECT TOOL STRUT TOWER BRACE 1979-93 2007 SVT STRUT BRACE 110 185 161 33 $60.00 $29.95 $144.95 $255.00 M-20201-F M-20201-M46 M-20201-S197 M-61108-R STRUT TOWER BRACE STRUT TOWER BRACE 1999-04 SOHC STRUT TOWER BRACE 2005-06 V8 SAFETY HARNESS 6 PT 51 161 161 15 $195.00 $129.95 $195.00 $350.00 M-FR500-C M-FR500-GT M-132087-SD100 M-607100-R197 GRANDAM CUP RACE CAR RACE VEHICLE SUPER DUTY ENTRY GUARD (SET OF 4) 2005 MUSTANG CAGED BIW 14 $129,900.00 16 $240,000.00 201 $159.00 15 $15,995.00 M-1620001-FRBK M-1620001-FRBL M-1620001-FRSL M-6360004-GT FR MUSTANG BLACK STRIPES FR MUSTANG STRIPES FR SILVER MUSTANG STRIPES SEAT COVER 48 48 48 25 Part Number Description Pg. No. Sugg. Retail $360.00 $360.00 $360.00 $245.00 www.fordracingparts.com 233 PARTS INDEX Description Part No. Page Description Part No. 2008 CATALOG (1) A.C. ACCESSORY DRIVE KIT A.C. ELIMINATOR KIT A.C. LINE DISCONNECT TOOL M-0750-A2008 M-8511-B351 M-8511-A50 M-19623-T7238 125 125 185 CAK W/P SVT MUSTANG 113 MM CAK W/PREMIUM CAL MT/AT 90 MM CAL 10TH ANNIVERSARY FRONT COBRA CALIPER HARDWARE KIT M-9603-SVT07 M-9603-GT06 M-2320-AF M-2321-A 31 41 157 157 ACCELERATOR PEDAL PAD AIR CLEANER 13" AIR CLEANER NUT BILLET FORD AIR CLEANER NUT BILLET FR M-2301-A M-9600-A302R M-9697-E M-9697-F 177 132 132 132 CALIPER KIT 10TH ANNIVERSARY F & R CALIPER MOUNT GRANDAM CALIPER SET COBRA CALIPERS REAR COBRA PAIR M-2320-A M-2134-R M-2320-C M-2320-CR 157 15 157 157 AIR CLEANER OVAL AIR CLEANER OVAL AIR CLEANER OVAL AIR CLEANER-MUSTANG M-9600-C302 M-9600-E302 M-9600-K302 M-9600-M302 132 132 132 132 CALIPERS WITH PADS FRONT PAIR CALIPERS WITH PADS REAR PAIR CAM COVER GASKET 2.0L CAM COVERS CHROME 4.6 4V M-2320-F M-2320-R M-6584-ZX3 M-6582-C464 157 157 19 79 AIRBOX & SNORKEL SVT ANTI-ROLL BAR KIT 2007 SVT MUSTANG ANTI-ROLL BAR KIT FOCUS ANTI-ROLL BAR KIT V6 M-9659-SVTF M-5490-B M-5400-Z3 M-5490-C 190 33 187 51 CAM KIT 2.0L FOCUS CAM KIT HIGH LIFT CAM LUBE (CASE OF 12) CAM SPROCKET ADJUSTABLE M-6252-A203 M-6550-T46 M-19579-A12 M-6256-Z20 191 73 110 192 ANTI-ROLL BARS 2005 MUSTANG AXLE AND BRG PULLER REAR AXLE ASSEMBLY MUSTANG GT 3.55 AXLE ASSEMBLY 8.8" 1979-98 MUSTANG M-5490-A M-4006-T6540 M-4001-A355 M-4006-B373 43 182 152 152 CAM TIMING KIT MODULAR CAMBER PLATES GRANDAM CAMSHAFT BEARINGS CAMSHAFT BEARINGS M-6256-T6487 M-18183-R M-6261-A460 M-6261-J351 183 15 102 102 AXLE ASSEMBLY 8.8" 1979-98 MUSTANG AXLE BEARING & SEAL KIT (PAIR) 8.8" AXLE GIRDLE 8.8" AXLE INSTALL KIT 8.8" M-4006-B355 M-1225-B M-4033-G1 M-4050-B 152 150 151 152 CAMSHAFT BEARINGS CAMSHAFT TIMING KIT ZETEC CAP 2005 MUSTANG BAR & PONY CARBON REBUILD KIT 8.8" M-6261-R351 M-6256-T6486 M-1096-A M-4700-C 102 183 63 150 AXLE KIT 2005-07 MUSTANG 8.8" AXLE SHAFT 8.8" 31T 4 LUG AXLE SHAFT 1999-UP MUSTANG REAR AXLE T-BOLT AND NUT KIT 9" M-4006-S197 M-4235-B M-4235-E M-4002-B 152 154 154 149 CARRIER ALUMINUM 9" CARRIER NODULAR 9" CARRIER NODULAR 9" CARRIER NODULAR 9" M-4141-D M-4141-B M-4141-E M-4141-H 148 148 148 148 BANNER FORD RACING 2' X 5' BEARING KIT CAR IRS BEARING RETAINER BEARING RETAINER M-1827-A1 M-1215-A M-7050-A M-7050-B 180 154 169 169 CARRIER NODULAR 9" CARRIER STEEL 9" CASE OF 12 CM-6731-FL1995 CASE OF 12 CM-6731-FL1A M-4141-J M-4141-HS M-6731-FL1995 M-6731-FL1A 148 148 116 116 BEARING SUPPORT NASCAR BEARING, SEAL KIT 8.8" IRS BELLHOUSING 4.6 3550 BELLHOUSING 5.0L T-5 M-4614-BR M-4413-A M-6392-M46 M-6392-E 149 150 173 173 CASE OF 12 CM-6731-FL299 CASE OF 12 CM-6731-FL300 CASE OF 12 CM-6731-FL400 CASE OF 12 CM-6731-FL784 M-6731-FL299 M-6731-FL300 M-6731-FL400 M-6731-FL784 116 116 116 116 BIG BOOST 2007 MY MUSTANG BIG BOOST KIT 2005-06 MUSTANG BLOCK 4.6L SOHC ROMEO BLOCK ALUMINUM N/A 4V M-9066-M117 M-9066-M11 M-6010-D46 M-6010-A46NA 76 76 70 70 CASE OF 12 CM-6731-FL820 CASTER ADJUSTER GRANDAM C-CLIP ELIMINATOR KIT 8.8" CENTER CAP M-6731-FL820 M-3052-R M-4220-A M-1096-CA 116 15 152 63 BLOCK ALUMINUM S/C 4V BLOCK ALUMINUM V8 SUPER BLOCK FR500 5.0L BLOCK HEAD BOLT SET BOSS X HEAD M-6010-A46SC M-6010-C450 M-6010-T50 M-6065-BOSS 70 99 70 99 CENTER CAP CENTER CAP CENTER CAP CENTER CAP M-1096-D M-1096-FR M-1096-H M-1096-J 63 63 63 63 BLOCK MODULAR 5.0L BLOCK NASCAR BLOCKOFF PLATE BRAKE BRACKET KIT GT REAR M-6010-BOSS50 M-6010-R452 M-9351-A302 M-2300-M 70 100 131 156 CENTER CAP CENTER CAP CENTER CAP CENTER CAP 2005-UP FORD RACING M-1096-K M-1096-M M-1096-N M-1096-FR1 63 63 63 63 BRAKE CALIPER PIN TOOL BRAKE COOLING KIT BRAKE DRUM 11" X 2.25" BRAKE DUCT KIT CARBON FIBER M-2300-T7299 M-2004-A M-1126-B M-2005-A 182 47 158 15 CHAIN & SPROCKET SET CHAIN & SPROCKET SET CHAIN & SPROCKET SET CHAIN & SPROCKET SET M-6268-A302 M-6268-A351 M-6268-A390 M-6268-A460 112 112 112 112 BRAKE KIT 1994-95 COBRA BRAKE KIT 1996-04 COBRA BRAKE KIT 2007 SVT MUSTANG BRAKE KIT COBRA “R” FRONT M-2300-Q M-2300-R M-2300-S M-2300-X 156 156 155 156 CHAIN & SPROCKET SET CHAIN & SPROCKET SET CHAIN & SPROCKET SET CHROME WHEEL 17" X 8" 2001 MUSTANG M-6268-B302 M-6268-B429 M-6268-F302 M-1007-B178C 112 112 112 58 BRAKE KIT FR500 RACING BRAKE KIT RALLY BRAKE KIT SEVERE DUTY BRAKE KIT SVT FOCUS M-2300-A M-2300-ZX3R M-2400-C M-2300-ZX3 15 189 156 189 CLOCK MASTERPIECE GAUGE CLOCK MASTERPIECE GAUGE CLOCK MASTERPIECE GAUGE CLUTCH 10.5" CENT M-15000-A961 M-15000-B961 M-15000-C961 M-7563-B302 178 178 178 174 BRAKE PAD KIT REAR BRAKE PADS PFC FRONT BREATHER AND PCV GROMMETS BREATHER CAP M-2200-R M-2001-R M-6892-F M-6766-A302 15 15 131 131 CLUTCH ASSEMBLY 26-11.0" CLUTCH BOLT KIT 11" CLUTCH CABLE KIT ADJUSTABLE CLUTCH DISC M-7560-T46 M-6397-A46 M-7553-B302 M-7550-X302 174 172 175 174 BREATHER CAP BREATHER CAP BREATHER CAP BREATHER CAP M-6766-B302 M-6766-G302 M-6766-H302 M-6766-K302 131 131 131 131 CLUTCH DISC 10.4" CLUTCH DISC 26-10.5" CLUTCH HSG ALUMINUM, TREMEC CLUTCH KIT M-7550-A302N M-7550-T302 M-6392-R58 M-7560-A302N 174 174 173 174 BULKHEAD ADJUSTER BUSHING UPPER REAR ARM CABLE AND QUADRANT KIT CAGED BIW 2005 MUSTANG M-7554-A M-5638-R M-7553-D302 M-607100-R197 175 47 175 15 CLUTCH KIT 2002-04 COBRA CLUTCH KIT 10.4" CLUTCH KIT 2007 COBRA CLUTCH KIT FOCUS 2.0L ZETEC M-7560-D46 M-7560-C302N M-7060-A54 M-7563-Z3 174 174 174 187 234 Techline (800) FORD788 Page Description Part No. CLUTCH LEVER SN95 CLUTCH RELEASE BEARING CLUTCH UPGRADE KIT 11" COBRA FORD GT BLUE M-7515-A M-7548-A M-7060-C46 M-6582-C COIL BRACKET CHROME COIL COVER SET 4.6L COIL COVER SET FORD GT COIL COVERS 2007 SVT Page Description Part No. Page 175 175 174 35 CYLINDER HEAD STUD KIT C460 CYLINDER SLEEVE CYLINDER SLEEVE D/S ASSY ALUMINUM 1996-04 MUST. 4.6 M/T M-6014-G500 M-6012-A351 M-6012-B351 M-4602-J 118 118 118 154 M-12044-A2 M-6067-A M-6067-GT M-6067-C 129 79 79 79 DAMPER FT LEFT SIDE DAMPER FT RIGHT SIDE DAMPER KIT 2005 MUSTANG DAMPER KIT 2006 FOCUS M-18120-RFL M-18120-RFR M-18000-A M-18000-ZX3B 15 15 43 188 COMP. A/P IDLER CONTROL ARM KIT CONTROL ARM SET COBRA FRONT CONV. KIT FOX 5.0L M-8604-A50 M-5500-A M-3075-D M-6670-A50 125 159 159 117 DAMPER KIT 2006 SPEC FOCUS DAMPER KIT 5.0L DAMPER KIT FOCUS SVT DAMPER RR LEFT SIDE M-18000-ZXM1 M-6316-M50 M-18000-ZX3 M-18120-RRL 188 126 188 15 COOLANT OVERFLOW CAP BILLET COVER FRONT CRANK DAMPER KIT CRANK PULLEY SPACER M-8006-GT M-6059-D351 M-6316-K351 M-8510-A351 133 123 126 124 DAMPER RR RIGHT SIDE DAMPERS 2000-05 SPEC FOCUS DAMPERS KIT 2007 SVT DANA HOUSING SPREADER M-18120-RRR M-18000-ZXM M-18000-C M-4010-T7071 15 188 33 182 CRANK PULLEY SPACER CRANK PULLEY SPACER CRANK SPACER CRANKSHAFT 5.4L STEEL M-8510-B351 M-8510-C351 M-6359-D460 M-6303-M54 124 124 124 80 DECAL COBRA DECAL FORD RACING (10 PACK) DECAL FR COMBO MINI (25 PACK) DECALS FR DIE CUT 15" (10 PACK) M-1447-D46 M-1820-A2 M-1820-B1 M-1820-FR15 177 180 180 180 CRANKSHAFT COBRA STEEL CRANKSHAFT DAMPER CRANKSHAFT DAMPER CRANKSHAFT DAMPER M-6303-D46 M-6316-A460 M-6316-A50 M-6316-C351 80 126 126 126 DECKLID EMBLEM “BULLITT” DECKLID EMBLEM “MACH 1” DECKLID EMBLEM “SVT” DECKLID TRIM 2005 MUSTANG M-1447-B M-1447-M1 M-1447-SVT M-2784-M 177 177 177 48 CRANKSHAFT DAMPER CRANKSHAFT POSITION TOOL CRATE ENGINE CRATE ENGINE 302/342 M-6316-D461 M-6303-T6024 M-6007-XEFM M-6007-X342 126 183 85 87 DELETE KIT 1994-95 5.0L A/C DELETE KIT 1996-04 4.6L A/C DETROIT C-LOCKER 8.8" 31T DIFF 8.8" 28T AUBURN M-19216-A50 M-19216-D46 M-4204-C31 M-4204-A28 125 125 15 151 CRATE ENGINE 351/385 HP CRATE ENGINE 351/385 HP CRATE ENGINE 351/392 430 HP CRATE ENGINE 351/392 430 HP M-6007-D351RT M-6007-D351FT M-6007-D392FT M-6007-D392RT 89 89 90 90 DIFF 8.8" 31T AUB PRO DIFF 8.8" 31T COBRA DIFF NON-LOCKING 8.8" 31T DIFF TORSEN 8.8" 28T M-4204-P31 M-4204-F318C M-4204-F3180 M-4204-T28 151 151 151 151 CRATE ENGINE 351/392 475 HP CRATE ENGINE 351/392 475 HP CRATE ENGINE BOSS 347 CRATE ENGINE SEALED CIRCLE TRACK M-6007-C392FT M-6007-C392RT M-6007-Z347 M-6007-D347SR 91 91 88 92 DIFF TORSEN 8.8" 31T DIFF TORSEN MTX-75 DIPSTICK & TUBE DIPSTICK & TUBE M-4204-T31 M-4204-F20 M-6750-A302 M-6750-B302 151 187 132 132 CROSS MEMBER T-56 COBRA CYLINDER BLOCK CYLINDER BLOCK CYLINDER BLOCK M-5059-B M-6010-C58 M-6010-GT M-6010-V351 170 100 70 100 DIPSTICK & TUBE DISC BRAKE KIT 1987-93 SHD DISC BRAKE KIT RS/COBRA DISC BRAKE TOOL REAR M-6750-C303 M-2300-K M-2300-RS M-2588-T7317 132 155 189 182 CYLINDER BLOCK CYLINDER BLOCK 460 CYLINDER BLOCK 5.0L CYLINDER BLOCK 5.4L M-6010-W351 100 M-6010-A460 101 M-6010-BOSS302 99 M-6010-M54 70 DISC BRK KIT 9" AXLE DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR M-2300-G M-12390-A M-12390-B M-12390-C 156 146 146 146 CYLINDER BLOCK 500 CYLINDER BLOCK 9.2 351 CYLINDER BLOCK 9.5 351 CYLINDER BLOCK ALUMINUM M-6010-A500 M-6010-M351 M-6010-N351 M-6010-C451 101 101 101 99 DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR M-12390-D M-12390-E M-12390-F M-12390-G 146 146 146 146 CYLINDER HEAD CYLINDER HEAD CYLINDER HEAD CYLINDER HEAD M-6049-C460 M-6049-E460 M-6049-N351 M-6049-SCJ 106 106 104 105 DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR DISTRIBUTOR DRIVEN GEAR M-12390-H M-12390-J M-12390-K M-12390-L 146 146 146 146 CYLINDER HEAD CYLINDER HEAD CYLINDER HEAD CYLINDER HEAD M-6049-SCJA M-6049-SCJB M-6049-X306 M-6049-X307 105 105 103 103 DISTRIBUTOR HOLDDOWN CLAMP DIVIDER BLUE 2-WIRE (4) PACK DIVIDER BLUE 3-WIRE (4) PACK DIVIDER BLUE 4-WIRE (4) PACK M-12270-A302 M-12297-B02 M-12297-B03 M-12297-B04 129 145 145 145 CYLINDER HEAD 2.OL ZETEC CNC CYLINDER HEAD 2.3L OHC ALUMINUM CYLINDER HEAD 4.6L PI CYLINDER HEAD 4.6L PI M-6049-ZX3P M-6049-E23A M-6049-P46 M-6050-P46 191 105 71 71 DOUBLE HOOK QUADRANT DRAG PACK 2007 MUSTANG SVT DRAG PACK AUTO TRANS 2006 MUSTANG DRAG PACK MANUAL TRANS 2006 MUSTANG M-7583-A M-2007-FR2SVT M-2006-FR2A M-2006-FR2 175 32 42 42 CYLINDER HEAD ALUMINUM CYLINDER HEAD ASSEMBLY CYLINDER HEAD ASSEMBLY CYLINDER HEAD ASSEMBLY M-6049-Z304D M-6049-Z304DA M-6049-D46 M-6049-GT 103 103 71 71 DRIVESHAFT ASSEMBLY ALUMINUM DRIVESHAFT LOOP 3.5" DRIVESHAFT LOOP KIT TWO PC DROP KIT 2004 F150 2" M-4602-G M-5478-C2 M-5478-S197 M-3000-G 154 154 154 160 CYLINDER HEAD ASSEMBLY LH CYLINDER HEAD CNC PORTED “Z” CYLINDER HEAD FOR 4.9L I-6 BILLET ALUMINUM CYLINDER HEAD HIGH PORT W SEAT/GD. M-6099-GT M-6049-Z304P M-6049-I49 M-6049-D3 71 103 105 104 DRUM BRAKE BACK PLATE KIT 9" DRUM/AXLE KIT-28T 5-LUG REAR DUAL FUEL PUMP COBRA DUAL FUEL PUMP KIT COBRA M-2209-B M-1126-A M-9407-C46 M-9407-GT05 158 154 140 140 CYLINDER HEAD LH 4.6L 4V CNC CYLINDER HEAD NASCAR CYLINDER HEAD RH 4.6L 4V CNC CYLINDER HEAD STUD KIT M-6050-464P M-6049-D35 M-6049-464P M-6014-Z304 72 104 72 118 DURASPARK CAP KIT DYNAMIC DAMPERS ECCENTRIC ECCENTRIC M-12106-A302 M-18120-R M-6287-B302 M-6287-C302 144 15 112 112 www.fordracingparts.com 235 PARTS INDEX Description Part No. EFI DISTRIBUTOR CAP KIT EFI TRUCK VALVE COVER SET EFI WIRE HARNESS EGR SPACER 65 MM M-12106-B302 M-6582-A351R M-12071-A50 M-9474-P65E EGR SPACER 70 MM EGR SPACER 75 MM EGR SPACER GASKET (5 PACK) ENGINE 347 NASCAR SHORT TRACK Description Part No. 144 129 141 107 FLYWHEEL M/T 157/50 STEEL FLYWHEEL M/T 157/50 STEEL FLYWHEEL M/T 4.6L 6 BOLT NODULAR IRON FLYWHEEL M/T 4.6L 6 BOLT STEEL M-6375-D302 M-6375-C302 M-6375-D46 M-6375-F46 172 172 172 172 M-9474-P70E M-9474-P75E M-9464-A50 M-6007-347NST 107 107 107 92 FLYWHEEL M/T 4.6L 8 BOLT ALUMINUM FLYWHEEL M/T 4.6L 8 BOLT STEEL FLYWHEEL M/T 460 1979-96 FOCUS SPRING 2006 SPEC M-6375-R00 M-6375-G46 M-6375-Z460 M-5560-ZXM1 172 172 172 188 ENGINE 351 SEALED RACE ENGINE 4.6L 3V MUSTANG ENGINE 5.8L ENGINE 5.8L STREET ROD M-6007-Z351SR M-6007-3V46 M-6007-J58 M-6007-S58 93 69 87 87 FORD OVAL 7-1/4" BILLET FORD OVAL 9" BILLET FRICTION MODIFIER (CASE OF 12) FRONT AXLE 4.30 F450/550 M-7843-A M-7843-C M-19546-A12 M-3002-F4430 200 201 151 195 ENGINE CONTROL MODULE ENGINE DRESS UP KIT 302 ENGINE FOCUS MIDGET 2.0L ENGINE GASKET SET M-12650-BR50 M-6000-A302R M-6007-USAC M-6003-A429 15 130 19 121 FRONT AXLE 4.88 F450/550 FUEL CAP SNAKE FAKE FUEL CHARGE HARNESS FUEL DOOR 2004-06 F150 ALUMINUM M-3002-F4488 M-2301-S M-12637-T50H M-2301-F150 195 36 15 201 ENGINE GASKET SET ENGINE GRANDAM RACE ENGINE HARNESS 5.0L ENGINE HOIST, 4000 LB M-6003-A50 M-6007-R50 M-12071-L302 M-6001-T2004 121 15 141 183 FUEL FILLER DOOR MUSTANG ALUMINUM FUEL FILLER DOOR ALUMINUM FUEL INJ 47# (EV14) FUEL INJECTOR 19# (8 PACK) M-2301-5M M-2301-E M-9593-G302 M-9593-C302 48 177 134 134 ENGINE MOUNTS FOX 460 ENGINE MOUNTS GRANDAM ENGINE PRE-OILER ENGINE STAND, 1000 LB M-6038-A460 M-6038-R M-6600-T6492 M-6001-T1726 93 15 183 183 FUEL INJECTOR 23# (8 PACK) FUEL INJECTOR 24# (8 PACK) FUEL INJECTOR 30# (8 PACK) FUEL INJECTOR 34# (8 PACK) M-9593-M23 M-9593-A302 M-9593-B302 M-9593-T46 134 134 134 134 ENTRY GUARD F150 EXT CAB (SET OF 4) ENTRY GUARD SUPER DUTY (SET OF 4) ENTRY GUARDS STAINLESS STEEL MUSTANG EXHAUST 2001-03 F150 HD SPLIT REAR M-13208-F100 200 M-132087-SD100 201 M-13208-M100 49 M-5230-HDSR 166 FUEL INJECTOR 39# (8 PACK) FUEL INJECTOR 42# (8 PACK) FUEL INJECTOR 160# (8 PACK) FUEL INJECTOR ADAPTOR (8 PACK) M-9593-M39 M-9593-F302 M-9593-E303 M-14464-A8 134 134 134 134 EXHAUST 2003-05 F250/350 6.0L DIESEL EXHAUST 2004 F150 4.6/5.4L SPLIT REAR EXHAUST 2004 F150 LIGHTNING STYLE EXHAUST 1998-03 F150 LIGHTNING STYLE M-5230-6L M-5230-SR M-5230-L M-5230-L3 166 166 166 166 FUEL INJECTOR CLEAN TOOL FUEL LINE DISCONNECT TOOL FUEL PUMP HIGH FLOW FUEL PUMP LIGHTNING M-9593-T7448 M-9280-T7337 M-9407-C50 M-9407-L54 184 185 140 197 EXHAUST 1998-04 F250/350 7.3L DIESEL EXHAUST 1999-04 F150 LIGHTNING EXHAUST 2.0L FOCUS ZX3 & 5 EXHAUST 2.0L FOCUS CENTER EXIT M-5230-73L M-5230-L2 M-5200-ZX3 M-5200-ZXC 166 166 165 165 FUEL SYSTEM ATL GASKET UPPER TO LOWER (5 PACK) GAUGE & HOSE FUEL PRESSURE GAUGE 2 1/16" VACUUM/BOOST M-9002-R M-9486-A50 M-9593-T7211 M-11622-A200 15 106 184 179 EXHAUST 2.0L SVT FOCUS EXHAUST 2.0L SVT FOCUS EXHAUST HANGER PLIERS EXHAUST HEADERS M-5200-ZX4 M-5200-D23C M-5230-T7677 M-9430-GT 165 165 182 25 GAUGE 2 1/16" FUEL PRESS GAUGE 2 1/16" OIL PRESS GAUGE 2 5/8" BATTERY VOLTAGE GAUGE 2 5/8" FUEL PRESS M-9275-A200 M-9278-A200 M-10835-A258 M-9275-A258 179 179 179 179 EXHAUST INSERT SVT FOCUS CENTER EXHAUST KIT MUSTANG V6 DUAL EXHAUST SYSTEM EXHAUST VALVE M-17835-F1 M-5230-V6 M-5230-R50 M-6505-A351 165 165 15 115 GAUGE 2 5/8" OIL PRESS GAUGE BATTERY VOLT GAUGE KIT 5 CHROME/BLACK GAUGE KIT 5 CHROME/WHITE M-9278-A258 M-10835-A200 M-19017-C961 M-19017-B961 179 179 178 178 EXHAUST VALVE EXHAUST VALVE EXHAUST VALVE EXHAUST VALVE M-6505-A429 M-6505-B304 M-6505-D461 M-6505-G302 115 115 115 115 GAUGE KIT 5 GOLD GAUGE KIT HARLEY VACUUM/BOOST GAUGE PYROMETER GAUGE TOOL FUEL PRESS M-19017-A961 M-11620-H200 M-10885-A200 M-9593-T6551 178 179 179 184 EXHAUST VALVE EXHAUST VALVE 30 MM FOCUS EXHAUST ZX4 2.3L FOCUS EXT CAB 2006 LIGHTNING STYLE M-6505-T46 M-6505-ZX3 M-5200-D234 M-5230-L06EC 73 191 165 166 GAUGE VACUUM/BOOST GAUGE WATER TEMP 2 1/16" GAUGE WATER TEMP 2 5/8" GEAR BOX T-56 RACING M-11622-A258 M-10883-A200 M-10883-A258 M-7003-T56R 179 179 179 15 FASCIA SVT FOCUS FRONT FASCIA SVT FOCUS REAR FENDER COVER FORD RACING FENDER EMBLEMS 2007 SVT M-17831-F M-17835-F M-1822-A2 M-1447-C 186 186 181 36 GEAR SET MTX 4.06 GSK KIT HIGH PERF 50 GUIDE PLATE (8 PACK) GUIDE PLATE (8 PACK) M-7343-A M-6051-A50 M-6566-D311 M-6566-D351 187 121 115 115 FENDER EMBLEMS COBRA “SNAKE” FLOOR MAT 1996-04 MUSTANG PAIR FLOOR MAT PAIR 2005 F250 FR FLOOR MAT PAIR 2005-06 MUSTANG M-1447-SR M-13086-B M-13086-F M-13086-C 177 180 180 180 GUIDE PLATE (8 PACK) HANDLING PACK 2005-06 MUSTANG HANDLING PACK 2007 MUSTANG SVT HANDLING PACK V6 M-6566-SCJ M-2005-FR3 M-2007-FR3SVT M-2007-FR3V6 115 43 33 51 FLYWHEEL 2.0L FOCUS FLYWHEEL A/T 4.6L DOHC FLYWHEEL ALUMINUM M/T 157/28 FLYWHEEL ALUMINUM M/T 157/50 M-6375-ZX3 M-6375-H46 M-6375-A302A M-6375-C302A 19 171 172 172 HANDLING PACKAGE PERF HEAD BOLT KIT HEAD CHANGING KIT HEAD CHANGING KIT M-5400-A M-6065-D289 M-6067-D46 M-6067-T46 161 118 121 121 FLYWHEEL BOLT MANUAL (10 PACK) FLYWHEEL BOLTS 4.6 MANUAL (8) FLYWHEEL BOLTS AUTO 4.6L (6) FLYWHEEL C-4 157/50 M-4216-A210 M-6379-B M-6379-A M-6375-E302 149 172 171 171 HEAD CHANGING KIT HEAD GASKET HEAD GASKET HEAD GASKET M-6067-T50 M-6051-A302 M-6051-A427 M-6051-A441 121 120 120 120 FLYWHEEL C-4 164/28 FLYWHEEL C4/AOD 164/50 FLYWHEEL M/T 157/28 STEEL FLYWHEEL M/T 157/50 M-6375-G302 M-6375-A50 M-6375-A302 M-6375-B302 171 171 172 172 HEAD GASKET SET HEAD GASKET SET HEAD GASKET SET HEAD GASKET SET M-6051-B341 M-6051-B460 M-6051-CP331 M-6051-R351 120 120 120 120 236 Techline (800) FORD788 Page Page Description Part No. HEAD GASKET SET HEAD GASKET SET FOR 5.0L HEAD HIGH PORT HEADER 2.0L FOCUS LONG TUBE M-6051-S331 M-6051-B51 M-6049-SC1 M-9430-ZX3L HEADER 2007 SVT SHORTY HEADER 4.6L 2V HEADER 4.6L 2V COATED HEADER 4.6L 4V Page Description Part No. Page 120 120 104 164 INTAKE MANIFOLD - 4V INTAKE MANIFOLD - 4V INTAKE MANIFOLD 4.6L PI INTAKE MANIFOLD GASKET M-9424-D451 M-9424-D452 M-9424-P46 M-9439-A302 109 109 78 119 M-9430-C54 M-9430-E462 M-9430-E463 M-9430-E464 164 164 164 164 INTAKE MANIFOLD GASKET INTAKE MANIFOLD GASKET INTAKE MANIFOLD KIT INTAKE MANIFOLD POWDERCOAT CHROME M-9439-A50 M-9439-B302 M-9424-Z51 M-9424-E302C 119 119 107 108 HEADER 4.6L 4V COATED HEADER 1986-93 COATED GT-40P HEADER 1986-93 GT-40P HEADER COATED LONG TUBE M-9430-E465 M-9430-P51 M-9430-P50 M-9430-ZX3LC 164 164 164 164 INTAKE OFF ROAD GT-40 INTAKE PLAQUE COBRA INTAKE SHROUD MUSTANG GT INTAKE SPACER M-9461-B50 M-1447-F46 M-6949-3V M-9486-A51 107 177 45 106 HEADER COATED SVTF HEADER F-SERIES 5.0L HEADER F-SERIES 5.8L HEADER GASKET 4.6L 2V M-9430-SVTFC M-9430-T50 M-9430-T58 M-9448-A462 164 164 164 164 INTAKE SPACER INTAKE SPACER INTAKE VALVE INTAKE VALVE M-9486-A52 M-9486-A53 M-6507-A304 M-6507-A351 106 106 115 115 HEADER GASKET 4.6L 4V HEADER GASKET 5.0L HEADER GASKET N351 HEADER GASKET SET M-9448-A464 M-9448-B302 M-9448-A351 M-9448-3V 164 164 119 164 INTAKE VALVE INTAKE VALVE INTAKE VALVE INTAKE VALVE M-6507-B429 M-6507-D461 M-6507-J302 M-6507-T46 115 115 115 73 HEADERS 2005 MUSTANG HEADERS 2005 MUSTANG COATED HEADERS 2V SD 6.8L HEADERS 2V SD 6.8L COATED M-9430-S197 M-9430-S197C M-9430-SD682 M-9430-SD682C 164 164 164 164 INTAKE VALVE 33 MM FOCUS JACK STANDS 3 TON JACK STANDS 3 TON JRSC BIG BOOST KIT M-6507-ZX3 M-17080-T1772 M-17080-T1733 M-9000-ZX3 191 185 185 190 HEADERS 3V 2004-05 F150 5.4L HEADERS 3V SD 6.8L HEADERS 3V SD 6.8L COATED HEADERS COATED 2007 SVT SHORTY M-9430-F543 M-9430-SD683 M-9430-SD683C M-9430-C54C 164 164 164 164 JRSC UPGRADE SVT FOCUS JRSC W/ BIG BOOST KIT KIT 2005-06 MUSTANG 500 HP KNUCKLE KIT CAR M-9000-SVTF M-6066-ZX3BB M-6066-M11 M-5970-A 190 190 77 154 HEADERS COATED F150 5.4L 2V HEADERS F150 5.4L 2V HEADERS/COLLECTOR MUFFLER HEADLIGHT SET LIGHTNING M-9430-F542C M-9430-F542 M-9430-GTX M-13006-L03 164 164 25 201 LIC PLATE FRAME BRUSHED LIC PLATE-FORD OVAL (12 PACK) LIC PLATE-FORD RAC (12 PACK) LICENSE PLATE FRAME M-1828-SS304B M-1828-F M-1828-FR M-1828-GT 177 177 177 24 HIGHWAY SAFETY KIT HOOD 1995 COBRA “R” HOOD 2000 COBRA “R” HOOD LATCH KIT M-19515-A M-16612-R58 M-16612-R00 M-16700-A 181 163 163 181 LICENSE PLATE FRAME LIGHTNING AIR METER 90 MM LINKAGE KIT LOCKING HEADER BOLT 1" SET M-1828-GTC M-12579-L54 M-7553-A302 M-9432-A51 24 140 175 164 HOOD SVT HOUSING KIT 8.8" ALUM IRS HUB COBRA IRS (1 EACH) HYDRAULIC CLUTCH COUPLING TOOL M-16612-C M-4010-A88 M-1109-A M-7553-T7646 36 154 52 184 LOCKING HEADER BOLT 3/4" SET LOCKING HEADER BOLT 8 MM-1.25 SET LOCKNUT SOCKET SET 4WD LONG BLOCK 4.6L 4V N/A ALUMINUM M-9432-A50 M-9432-A54 M-1197-T4543 M-6007-A46NA 164 164 182 69 HYDRAULIC ROLLER CAMSHAFT HYDRAULIC ROLLER CAMSHAFT HYDRAULIC ROLLER CAMSHAFT HYDRAULIC ROLLER CAMSHAFT M-6250-B303 M-6250-E303 M-6250-F303 M-6250-X303 110 110 110 110 LONG BLOCK 4.6L 4V S/C ALUMINUM LONG BLOCK 5.0L HIGH PERF LOOM SET STREET ROD W/FORD LOOM SET STREET ROD W/SVO M-6007-A46SC M-6007-Z50Z M-12297-L900 M-12297-L903 69 86 145 145 HYDRAULIC ROLLER CAMSHAFT IGNITION WIRE SET 9 MM BLACK IGNITION WIRE SET 9 MM BLACK IGNITION WIRE SET 9 MM BLUE M-6250-Z303 M-12259-M301 M-12259-M302 M-12259-C301 110 145 145 145 LOOM SET STREET ROD W/V-8 LOWER A-ARM BRACE 2005-07 FRONT LOWER ARMS 2007 SVT FT LOWER ARMS FR500C M-12297-L901 M-5025-A M-3075-E M-5649-R 145 47 47 15 IGNITION WIRE SET 9 MM BLUE IGNITION WIRE SET 9 MM BLUE IGNITION WIRE SET 9 MM RED IGNITION WIRE SET 9 MM RED M-12259-C302 M-12259-C460 M-12259-R301 M-12259-R460 145 145 145 145 LOWER ARMS GRANDAM FT LOWER CONTROL ARM REAR LOWER CONTROL ARMS PAIR LOWER RR ARMS 1979-98 MUSTANG M-3075-R M-5538-A M-3075-A M-5649-H 15 159 159 159 IGNITION WIRE SET 9 MM YELLOW IGNITION WIRE SET BLUE 4.6L 2V IGNITION WIRE SET BLUE 4.6L 4V IGNITION WIRE SET RED 4.6L 2V M-12259-Y301 M-12259-C462 M-12259-C464 M-12259-R462 145 145 145 145 LOWER RR ARMS 1999-04 MUSTANG LOWERING KIT 04 F150 2WD LOWERING KIT F150 2WD LOWERING KIT LIGHTNING M-5649-H1 M-3000-T3 M-3000-T1 M-3000-L 159 160 160 160 IGNITION WIRE SET RED 4.6L 4V INFO GAUGE PERF INJECTOR 60 LB/HR (8) INJECTOR ADAPTER (8) U2J M-12259-R464 M-10898-A100 M-9593-LU60 M-14464-U2J 145 179 134 134 MAIN HARNESS MANIFOLD NASCAR V8 MECH. SPEEDO T-56 1996-98 MINI-STARTER 1.4 KW M-12071-C302 M-9424-D453 M-7003-G M-11000-B51 141 109 170 86 INTAKE BOLT ON FR200 INTAKE GASKET SET INTAKE GASKET SET INTAKE MANIFOLD KIT POLISHED M-9424-ZX3R M-9439-G460 M-9439-H460 M-9424-Z51P 192 119 119 107 MINI-STARTER HI-TORQUE MUFFLER MUFFLER 2005 MUSTANG V6 AXLE-BACK MUFFLER SET 2005 MUST. GT AXLE-BACK M-11000-A50 M-5230-GT M-5230-5V6 M-5230-5GT 86 25 167 165 INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD M-9424-A302P M-9424-C460 M-9424-D302 M-9424-F302 108 108 108 108 MUFFLER SET 2005 MUST. GT AXLE-BACK MUFFLER SET 2007 SVT MUSTANG 49 STATE MUFFLER SET 2007 SVT MUSTANG 50 STATE LEGAL NUT LOCK & BOLT KIT M-5230-GTA M-5230-SGT M-5230-SVT1 M-4144-B 167 31 31 149 INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD INTAKE MANIFOLD M-9424-G429 M-9424-H429 M-9424-J429 M-9424-V351 108 108 108 108 OIL COOLER OIL FILL CAP OIL FILL CAP PAINTED BILLET OIL FILTER ADAPT 90 DEG M-6642-S101 M-6766-GT M-6766-MP46 M-6880-A50 116 131 131 116 www.fordracingparts.com 237 PARTS INDEX Description Part No. OIL FILTER ADAPTOR KIT OIL FILTER MOUNT HD OIL PAN CORE 4.6L OIL PAN DEEP SUMP TRUCK M-6881-C100 M-6880-S M-6675-D46 M-6675-L54 OIL PAN GASKET 1 PC OIL PAN GASKET 5.0L OIL PAN GASKET 7.5L 1 PC OIL PAN KIT 351 FOX Description Part No. 116 116 80 80 REPLACEMENT CHAIN REPLACEMENT PLUG KIT RING & PINION 10.25" RING & PINION 10.25" M-6268-G302 M-6026-R452 M-4209-K410M M-4209-K456M 112 118 153 153 M-6710-A351 M-6710-A50 M-6710-A460 M-6675-A58 121 121 121 117 RING & PINION 8.8" RING & PINION 8.8" RING & PINION 8.8" RING & PINION 8.8" M-4209-F308 M-4209-F327 M-4209-F373N M-4209-G355A 153 153 153 153 OIL PAN KIT 460 FOX OIL PAN KIT 5.0L OIL PUMP OIL PUMP 2.0L FOCUS M-6675-A460 M-6675-A50 M-6600-M50 M-6600-ZX3 117 117 116 19 RING & PINION 8.8" RING & PINION 8.8" RING & PINION 8.8" RING & PINION 8.8" 4.10 M-4209-G410M M-4209-G430M M-4209-G456 M-4209-G410A 153 153 153 153 OIL PUMP HIGH VOLUME OIL PUMP HIGH VOLUME OIL PUMP HIGH VOLUME OIL PUMP HIGH VOLUME M-6600-A460 M-6600-B3 M-6600-D2 M-6600-D46 116 116 116 79 RING & PINION INSTALL KIT 8.8" RING & PINION INSTALL KIT 8.8" RING & PINION INSTALL KIT 8.8" RING GEAR BOLT (SET OF 10) 8.8" M-4210-A M-4210-B M-4210-C M-4216-A300 150 150 150 171 OIL PUMP PICKUP TUBE BOSS BLOCK OIL PUMP SHAFT HEAVY DUTY OIL PUMP SHAFT HEAVY DUTY OIL PUMP SHAFT HEAVY DUTY M-6622-BOSS302 M-6605-A341 M-6605-A427 M-6605-A429 117 116 116 116 RING GEAR BOLTS (100 PACK) ROCKER ARM SHIM KIT ROCKER ARM STUDS (16) ROCKER ARM STUDS (16) M-4216-A200 M-6529-A302 M-6527-C311 M-6527-D311 149 114 114 114 OIL PUMP SHAFT HEAVY DUTY OIL RESTRICTOR KIT OIL RESTRICTOR KIT O-RING & DOWEL KIT M-6605-B302 M-6799-A302 M-6799-R351 M-6026-R451 116 99 99 118 ROCKER CHANNEL KIT (8 PACK) ROCKER COVER GASKET SET ROLLER CAM BEARINGS ROLLER CAM BEARINGS M-6588-A50 M-6584-A452 M-6261-C351 M-6261-C450 114 119 102 99 PWR STRG ACCESSORY DRIVE KIT PARK BRAKE CABLE (FRONT) PARK BRAKE CABLE (REAR) PARK LAMP SET LIGHTNING M-8511-A351 M-2810-A M-2809-A M-13200-L02 125 157 157 201 ROLLER CAM BEARINGS ROLLER CAM CONV. KIT ROLLER PILOT BEARING 4.6 ROLLER ROCKER PAIR M-6261-D351 M-6253-A50 M-7600-B M-6564-AS51 102 114 175 113 PARKING BRAKE LEVER COBRA PEDAL PAD BRAKE OR CLUTCH (1) PEDAL PAD DEAD PENNANT STRING RACING 50' M-2302-C M-2301-B M-2301-C M-1827-P1 36 177 177 180 ROLLER ROCKER PAIR ROLLER ROCKER PAIR ROLLER ROCKER PAIR ROLLER ROCKER PAIR M-6564-AS60 M-6564-BS51 M-6564-CS51 M-6564-ES51 113 113 113 113 PILOT BEARING PULLER KIT PINION & DIFF BRG PULLER PINION BEARING RET PINION BEARING RET M-7600-T7318 M-4209-T7794 M-4614-A M-4614-B 184 182 149 149 ROLLER ROCKER SET ROLLER ROCKER SET ROLLER ROCKER SET ROLLER ROCKER SET M-6564-A351 M-6564-A460 M-6564-A50 M-6564-B351 113 113 113 113 PINION FLANGE 2003-04 COBRA PINION NUTS (100 PACK) PINION OIL SEAL PLUG & DOWEL KIT M-4851-B M-4213-A M-4676-A111 M-6026-A302 152 149 149 118 ROLLER ROCKER SET ROLLER ROCKER SET ROLLER ROCKER SET ROLLER ROCKER SET M-6564-C351 M-6564-D351 M-6564-DS51 M-6564-E351 113 113 113 113 PLUG & DOWEL KIT PLUG & DOWEL KIT PLUG & DOWEL KIT PLUG & DOWEL KIT M-6026-A460 M-6026-A58 M-6026-B302 M-6026-R351 118 118 118 118 ROLLER ROCKER SET ROLLER ROCKER SET ROTOR FORD GT REAR ROTOR HAT M-6564-F351 M-6564-K351 M-2026-GT M-1124-R 113 113 25 15 PLUG KIT-REAR CAM POLISH 2005-06 MUSTANG 500 HP POWER PACK FORD GT POWER UPGRADE PACK 2007 SVT M-6026-S351 M-6066-M11P M-2005-GT M-2007-FR1SVT 118 77 24 31 ROTORS FORD GT FRONT S/C 2001-04 LIGHTNING REPLACEMENT S/C 2001-04 LIGHTNING REPLACEMENT POLISHED S/C 1999-00 LIGHTNING REPLACEMENT M-1125-GT M-6066-LR M-6066-LRP M-6066-L90 25 194 194 194 POWER UPGRADE PACKAGE MT/AT 2006 MUSTANG PP BOLT AND DOWEL KIT PRESSURE PLATE 10.4" PRESSURE PLATE 10.4" M-2006-FR1 M-6397-A302 M-7563-A302N M-7563-C302N 41 172 174 174 S/C 1999-00 LIGHTNING REPLACEMENT POLISHED S/C 4V ENGINE SVT 5.4L S/C COBRA REPLACEMENT S/C COBRA REPLACEMENT M-6066-L90P 194 M-6007-C54 35 M-6066-CT46HP 75 M-6066-CT46PHP 75 PROPORTIONING VALVE ALUMINUM PROPORTIONING VALVE PLUG PUSHROD GUIDE PLATES (8 PACK) PWR STRG PUMP PULLEY TOOL M-2328-C M-2450-A M-6566-Z304D M-10300-T7830 158 157 115 184 S/C CONVER KIT EXPEDITION S/C KIT 2007 MY 400 HP S/C KIT 2007 MY 500 HP S/C KIT MUSTANG 4.6L 3V M-6066-E05 M-6066-M463V7 M-6066-M117 M-6066-M463V 194 76 77 76 RACE BOOSTER RACE CAR GRANDAM CUP RADIATOR ALUMINUM 1979-93 RADIATOR HIGH PERFORMANCE M-2005-R M-FR500-C M-8005-C M-8005-P221 15 14 133 197 S/C KIT P MUSTANG 4.6L 3V S/C KIT F150 5.4L 3V 2004 S/C KIT F150 5.4L 3V 2005-06 S/C KIT POLISHED F150 5.4L 3V 2004 M-6066-M463P M-6066-F104 M-6066-F105 M-6066-F104P 76 194 194 194 RADIATOR HIGH PERFORMANCE RADIATOR HIGH PERFORMANCE RADIATOR HOSE KIT RADIATOR KIT C & R M-8005-S197 M-8005-C03 M-6052-B M-8005-R 133 133 133 15 S/C KIT POLISHED F150 5.4L 3V 2005-06 S/C POLISHED KIT 2007 MY 400 HP S/C POLISHED KIT 2007 MY 500 HP S/C PULLEY COVER SS COBRA M-6066-F105P M-6066-M463P7 M-6066-M11P7 M-2301-J 194 76 77 162 RADIO REMOVAL TOOL FORD REAR AXLE SHAFT 1979-93 MUSTANG REAR AXLE SHAFT 1994-98 MUSTANG REAR MAIN SEAL M-19061-T7575 M-4235-F M-4235-D M-6701-A460 185 154 154 119 S/CJ VALVE SPRING CUP SET S/WHEEL LEATHER MUSTANG SAFETY HARNESS 6 PT SB ROLLER PILOT BEARING M-6536-SCJ M-3601-B M-61108-R M-7600-A 114 181 15 175 REAR MAIN SEAL REAR MAIN SEAL REAR MAIN SEAL INSTALLER RELAY PACKAGE M-6701-B302 M-6701-B351 M-6701-T7786 M-12071-K302 119 119 184 141 SCUFF PLATES MUSTANG SVT SEAT COVER SEAT FR500C RACE CAR SEATS-CLOTH 2000 COBRA “R” M-13208-C M-6360004-GT M-16620-R M-16620-C 49 25 15 163 238 Techline (800) FORD788 Page Page Description Part No. SERVICE CABLE SERVICE CABLE 1996-04 SHIFT BOOT SHIFT KNOB M-7553-C302 M-7553-E302 M-7277-A M-7213-A SHIFT KNOB SHIFT KNOB “MACH 1” SHIFT KNOB 5 SPEED CARBON SHIFT KNOB 5 SPEED COBRA Page Description Part No. Page 175 175 169 168 TENT WALL RACING 15' THROTTLE BODY 65 MM THROTTLE BODY 70 MM THROTTLE BODY 70 MM 4.6L M-1827-W15 M-9926-P65L M-9926-P70L M-9926-D462 180 107 107 107 M-7213-GT M-7213-H M-7213-D M-7213-G 24 168 168 168 THROTTLE BODY 70 MM FOCUS THROTTLE BODY 75 MM THROTTLE BODY GASKET (5 PACK) THROTTLE BODY-POLISHED 65 MM M-9926-ZX3R M-9926-P75L M-9933-D462 M-9926-P65E 192 107 78 107 SHIFT KNOB CARBON LEATHER SHIFT KNOB T-56 SHIFTER 2007 SVT SHORT THROW SHIFTER BOOT CARBON M-7213-E M-7213-B M-7210-B M-7277-B 168 168 168 169 THROTTLE BODY-POLISHED 70 MM THROTTLE BODY-POLISHED 75 MM THRUST PLATE THRUST PLATE M-9926-P70E M-9926-P75E M-6269-A351 M-6269-A460 107 107 112 112 SHIFTER T-5/T-45 SHIFTER T-5/T-45 HURST SHIFTER T-56 SHIFTER V6 SHORT THROW M-7210-N M-7210-M M-7210-T56 M-7210-V 168 168 168 168 THRUST PLATE TIE ROD 2005 W/GREASE FITTING TIMING CHAIN AND SPROCKET TIMING CHAIN FRONT COVER M-6269-C450 M-3130-R2 M-6268-C450 M-6059-C450 99 15 99 99 SHIFTER W/KNOB 2005 MUSTANG SHORT BLOCK ALUMINUM 4.6 4V SHORT BLOCK 4.6L 4V N/A ALUMINUM SHORT BLOCK 4.6L 4V S/C ALUMINUM M-7210-T1 M-6009-A46SCB M-6009-A46NA M-6009-A46SC 168 69 69 69 TIMING POINTER 429-460 BILLET TIMING POINTER BILLET TIMING POINTER BILLET TIPS FUSION I4 M-6023-A460 M-6023-B351 M-6023-C351 M-5230-FT 126 126 126 167 SHORT BLOCK BOSS 347 SILL PLATES 2005-UP MUSTANG LIGHTED FR SILL PLATES 2005-UP MUSTANG LIGHTED SVT SLIP YOKE 28 SPLINE M-6009-Z347 M-13208-LFR M-13208-LSVT M-4841-B 88 49 49 171 TIRE INFLATOR SVT TORQUE ANGLE GAUGE TORSEN SVT FOCUS TRAC-LOK 9" 28T AG M-19543-C M-6015-T4554 M-4204-SVTF M-4204-F28A 62 183 187 151 SLIP YOKE 31 SPLINE SMALL PARTS KIT SPARK PLUG 3V 0DEG SPINNER 2005 MUSTANG BAR & PONY M-4841-A M-4663-A100 M-12405-3V0 M-1096-B 171 149 46 63 TRAC-LOK 9" 31T AG TRAC-LOK DIFF 7.5" 28T TRAC-LOK DIFF 8.8" 28T TRAC-LOK DIFF 8.8" 31T M-4204-F31A M-4204-C75 M-4204-F288 M-4204-F318 151 151 151 151 SPRING KIT SPRING KIT SPRING KIT SPRING KIT M-5300-B M-5300-C M-5300-F M-5300-G 161 161 161 161 TRAC-LOK KIT TRAC-LOK KIT 8.8" TRANS CROSS MEMBER TRANS DIPSTICK & TUBE M-4700-A M-4700-B M-5059-A M-6750-D303 149 150 170 132 SPRING KIT 2005 MUSTANG SPRING KIT 2006+ FOCUS SPRING KIT 2007 SVT MUSTANG SPRINGS 2000-05 SPEC FOCUS M-5300-K M-5560-ZX3B M-5300-L M-5560-ZXM 43 188 33 188 TRANS DIPSTICK & TUBE TRANS OIL COOLER TRANS PAN E40D/4R100 DEEP ALUMINUM TRANS REBUILD KIT T5 M-6750-E303 M-7095-SR M-7195-T M-7000-A 132 133 176 169 SPRINGS FUSION LOWER SPRINGS V6 MUSTANG START BUTTON KIT FOR MUSTANG FORD GT STEERING RACK GRANDAM M-5300-M M-5300-N M-11572-GT M-3200-R 161 51 45 15 TRANS SHD T5 TRANS SHIFT LEVER TRANS T-56 5.0L TRANS T-56 6-SPEED M-7003-Z M-7210-GT M-7003-H M-7003-F 169 24 170 170 STEERING WHEEL FR500C STEERING WHEEL SVT STICK-ON CHROME V-8 BADGE STRIPES FR MUSTANG M-3601-R 15 M-3600-C 36 M-7843-V8 177 M-1620001-FRBL 48 TRANS TKO 600 HDO TRANS TREMEC 5 SPEED EXTRA HD TRANS TREMEC 5 SPEED HD TRANSAXLE COOLER KIT M-7003-R58H M-7003-R58C M-7003-R58W M-7095-GT 170 170 169 25 STRIPES FR MUSTANG BLACK STRIPES FR SILVER MUSTANG STRUT BRACE 2007 SVT STRUT MOUNT PAIR 2007 SVT FRONT M-1620001-FRBK M-1620001-FRSL M-20201-C M-18183-A 48 48 33 34 TRANSLINE DISCONNECT TOOL TRUETRAC LSD 10.25 TRUETRAC LSD 9.75 U-JOINT KIT M-9500-T7798 M-4204-TT312 M-4204-TT31 M-4635-A 184 151 151 150 STRUT TOWER BRACE STRUT TOWER BRACE 2005-06 V8 STRUT TOWER BRACE 1979-93 STRUT TOWER BRACE 1999-04 SOHC M-20201-F M-20201-S197 M-20201-A50 M-20201-M46 51 161 161 161 UNDERDRIVE PULLEY SET UNDERDRIVE PULLEY SET UNDERDRIVE PULLEYS UNIV. STL. CLUTCH HSG M-8509-A51 M-8509-D462 M-8509-M M-6392-C 124 125 123 173 STRUT ZX2-R (SET OF 4) SUBFRAME ZX3 MOTORSPORT SUPERCHARGER CAMS 4V SUPERCHARGER KIT M-18000-Z2 M-5035-ZX3 M-6550-GT M-6066-CT46 188 187 73 75 VALVE COVER VALVE COVER 3V BLK WRINKLE VALVE COVER BLACK COBRA SET VALVE COVER BLACK COBRA SET M-6000-F302 M-6582-3VBLK M-6582-B M-6582-F302 129 79 130 128 SUPERCHARGER KIT POLISHED SUPERCHARGER UPGRADE KIT 2007 SVT SUSPENSION KIT DRAG RACE SUSPENSION KIT SVT FOCUS M-6066-CT46P M-6066-SGT M-3000-D M-3000-ZX3 75 75 161 188 VALVE COVER BLACK MUSTANG SET VALVE COVER BLACK RACING SET VALVE COVER CHROME SET VALVE COVER CHROME SET M-6582-B301 M-6582-L302 M-6582-C351R M-6582-D302 128 128 130 128 TACHOMETER CHROME/WHITE TACHOMETER FR RACING TACHOMETER GOLD TAILLIGHT SET LIGHTNING M-17360-B961 M-17360-A201 M-17360-A961 M-13404-L01 178 179 178 201 VALVE COVER CHROME SET VALVE COVER CHROME SET VALVE COVER CHROME SET VALVE COVER COBRA SET M-6582-R302 M-6582-R351 M-6582-R460 M-6582-A 128 130 130 128 TAPPET SET HYDRAULIC OEM (16) TAPPET SET HYDRAULIC ROLLER (16) TAPPET SET MECHANICAL (16) TAPPET SET RETRO HYDRAULIC ROLLER M-6500-B303 M-6500-R302 M-6500-C302 M-6500-S58 112 112 112 112 VALVE COVER GASKET SET VALVE COVER GASKET SET-5.OL VALVE COVER POLISHED COBRA SET VALVE COVER POLISHED COBRA SET M-6584-A460 M-6584-A50 M-6582-A427 M-6582-F303 119 119 130 128 TENT RACING 10' X 10' TENT RACING 10' X 15' TENT RACING 10' X 20' TENT WALL RACING 10' M-1827-T10 M-1827-T15 M-1827-T20 M-1827-W10 180 180 180 180 VALVE COVER POLISHED MUSTANG SET VALVE COVER POLISHED RACING SET VALVE COVER POLISHED RACING SET VALVE COVER POLISHED RACING SET M-6582-F301 M-6582-C460 M-6582-E302P M-6582-Z351 128 130 128 130 www.fordracingparts.com 239 PARTS INDEX Description Part No. VALVE COVER SET VALVE COVER SET VALVE COVER SET VALVE COVER SET M-6582-A301R M-6582-A302R M-6582-A341R M-6582-A342R VALVE COVER SET BOSS VALVE COVER SET BOSS 302 VALVE COVER SET CHROME VALVE COVER SET CHROME Description Part No. 128 128 130 130 WHEEL AND BOOT SVT BLACK STITCH WHEEL ANNIVERSARY COBRA WHEEL BLACK 2007-08 SVT MUSTANG WHEEL BLACK FORD RACING M-3601-C M-1007-A179 M-1007-S1895B M-1007-F500B 36 57 55 60 M-6582-BOSS M-6582-BOSS302 M-6582-A390R M-6582-A429R 127 127 130 130 WHEEL BLACK RALLY WHEEL CAP (A208) 20" X 8" HARLEY WHEEL CHROME 4 LUG 1995 COBRA “R” WHEEL CHROME FORD RACING M-1007-S177B M-1096-W M-1007-R54C M-1007-F500C 62 63 59 60 VALVE COVER SET CHROME VALVE COVER SET CHROME 3V VALVE COVER: COBRA EFI VALVE COVER: COBRA KIT M-6582-B303R M-6582-C543V M-6000-D302 M-6000-C302 128 79 129 129 WHEEL CHROME PONY WHEEL EUROPEAN FOCUS SVT WHEEL F250 HARLEY-DAVIDSON WHEEL GRANDAM REAR M-1007-M167 M-1007-S177E M-1007-A208 M-1007-F1810A 59 62 60 15 VALVE COVER: MUSTANG EFI VALVE COVERS 3V BLUE VALVE COVERS 3V SILVER VALVE COVERS 4V BLUE M-6000-E302 M-6582-3VB M-6582-3VS M-6582-A54 129 79 79 79 WHEEL GT FRONT WHEEL GT REAR WHEEL MACH 1 WHEEL MUSTANG GT-R M-1007-GTF M-1007-GTR M-1007-M178 M-1007-F1810 24 24 58 15 VALVE COVERS BLACK RACING EFI VALVE COVERS POLISHED RACING EFI VALVE COVERS SVT SMOKED CHROME VALVE GUIDE KIT (4 PACK) M-6000-J302R M-6000-K302R M-6582-CC M-6510-Y303 129 129 35 115 WHEEL NUT (5 PACK) WHEEL NUT/LOCK KIT WHEEL PAINTED PONY WHEEL POLISHED 1999 COBRA M-1012-A M-1012-K M-1007-N167 M-1007-G178 63 62 59 57 VALVE KEEPERS V-8 (SET OF 16) VALVE LOCKS V-8 (SET OF 16) VALVE SPRING LOCATOR (SET OF 16) VALVE SPRING RETAINER (SET OF 16) M-6518-B351 M-6518-BH M-6536-BH M-6514-BH 114 114 114 114 WHEEL SILVER FORD RACING WHEEL SVT FOCUS WHEEL, F150 20" X 10" POLISH WHEEL, F150 20" X 8.5" POLISH M-1007-F500 M-1007-S177 M-1007-L2010P M-1007-L2085P 60 62 61 61 VALVE SPRING RETAINERS (16) VALVE SPRING RETAINERS (16) VALVE SPRING SEAT (16) VALVE SPRING SET ZETEC M-6514-A50 M-6514-B50 M-6536-E351 M-6513-ZX3E 114 114 114 191 WHEEL, F150 20" X 8.5" SILVER WINDAGE TRAY 302 WINDAGE TRAY 390 WINDOW LOUVERS 2005-07 MUSTANG QTR M-1007-L2085 M-6687-A302 M-6687-A390 M-1784-MS 61 117 117 48 VALVE SPRINGS (16 PACK) VALVE SPRINGS (16 PACK) VALVE SPRINGS 4.6L HI LIFT (32) VALVE SPRINGS (SET OF 16) M-6513-A351 M-6513-A50 M-6513-T46 M-6513-BH 115 115 73 115 WING 2005 GT500 REAR WING NUT-FORD WING NUT-MUSTANG WIRE LOOM BLUE PAIR M-16600-SVTC M-9697-A M-9697-C M-12297-B14 36 132 132 145 VALVE STEM SEAL (SET OF 16) VEHICLE RACE V-PULLEYS, BILLET 1 GROOVE V-PULLEYS, BILLET 1 GROOVE M-6571-A50 M-FR500-GT M-8509-CM M-8509-DM 115 16 124 124 WIRE SET BLUE 4.6L 2V F150 X-PIPE 2005 MUSTANG M-12259-T462 M-5251-R 145 46 V-PULLEYS, BILLET 2 GROOVE WATER PUMP WATER PUMP WATER PUMP M-8509-EM M-8501-C460 M-8501-C50 M-8501-E351S 124 122 122 123 WATER PUMP WATER PUMP ASSEMBLY WATER PUMP ELECTRIC WATER PUMP HOUSING KIT M-8501-G351 M-8501-R351 M-8501-L54 M-8501-R352 122 122 123 122 WATER PUMP KIT WATER PUMP POWDERCOAT CHROME WATER PUMP POWDERCOAT CHROME WATER PUMP SHORT SERPENTINE M-8501-A50 M-8501-B50C M-8501-F351C M-8501-D50 123 123 123 123 WHEEL 2004-05 LIGHTNING WHEEL 2007 BLACK MACHINED LIP WHEEL 17" X 8" BLACK MUSTANG GT WHEEL 17" X 8" CHROME MUSTANG GT M-1007-L2010 M-1007-S1895B1 M-1007-T178B M-1007-T178C 61 55 56 56 WHEEL 17" X 8" POLISHED MUSTANG GT WHEEL 17" X 8" SILVER MUSTANG GT WHEEL 18" BLACK MUSTANG WHEEL 18" CHROME MUSTANG M-1007-T178P M-1007-T178S M-1007-S1885B M-1007-S1885C 56 56 55 55 WHEEL 18" SPARKLE SILVER MUSTANG WHEEL 18" X 8.5" POLISHED MUSTANG GT WHEEL 18" X 8.5" SILVER MUSTANG GT WHEEL 1995 COBRA “R” M-1007-S1885 M-1007-U1885P M-1007-U1885 M-1007-R58 55 56 44 57 WHEEL 1995 COBRA “R” CHROME WHEEL 1996 COBRA CHROME WHEEL 1998 COBRA WHEEL 2000 CHROME COBRA “R” M-1007-C58 M-1007-C178 M-1007-D178 M-1007-R189C 57 58 58 59 WHEEL 2000 COBRA “R” WHEEL 2001 BLACK MUSTANG WHEEL 2003 CHROME COBRA WHEEL 2003 COBRA M-1007-R189 M-1007-K178 M-1007-S179C M-1007-S179 59 58 57 57 WHEEL 2003 MUSTANG WHEEL 2004 SVT FOCUS WHEEL 2007 SVT WHEEL 4 LUG 1995 COBRA “R” M-1007-J178 M-1007-S177A M-1007-S1895 M-1007-R54 58 62 55 59 240 Techline (800) FORD788 Page Page GENERAL INFORMATION AND TECHNICAL ASSISTANCE Ford Racing Performance Parts are available through Ford, Lincoln and Mercury dealers and selected independent automotive specialty/ performance outlets. Ford Motor Company reserves the right to change, without notice or obligation, its products, prices, specifications and materials. GENERAL INQUIRIES AND TECHNICAL QUESTIONS ON PRODUCTS SHOULD BE ADDRESSED TO: Ford Racing Performance Parts P.O. Box 51394 Livonia, MI 48151 TECHNICAL ASSISTANCE TECHLINE Telephone (800) FORD788 (FOR FORD RACING PARTS ONLY) When you need fast, reliable, up-to-date information about Ford Racing Performance Parts equipment, call the Ford Racing Techline. You’ll reach staff with a huge database of specifications and automotive know-how. The staff includes long-time racers and performance experts with many years of hands-on Ford experience and the database includes everything from the Ford Racing Performance Parts parts catalog to an extensive library of high-performance reference materials. You can call the Techline with questions about Ford Racing Performance Parts at (800) FORD788 from 10:00 a.m. to 6:00 p.m. Eastern Standard Time. If you need more in-depth information, write to Ford Racing Performance Parts. For correct assistance, be sure to include the following information: • Name and address • Day and evening phone number • Year/make/model of vehicle • Original factory engine CID, transmission type and axle ratio • Proposed modification changes If you cannot find Ford Racing Performance Parts parts locally, call the Techline for purchase assistance. For official Ford Motor Company Shop Manuals and wiring diagrams, call Helm Publications at 1-800-782-4356. See our website at www.fordracingparts.com NEW for 2008 Product information, dealer list and more! © Ford Motor Company Twenty-Sixth Edition — 2008 All rights reserved. This book or any part may not be reproduced in any form without written permission from Ford Motor Company. FORD RACING HIGH-PERFORMANCE DRIVING SCHOOL AT MILLER MOTORSPORTS PARK VISIT ONE OF THE WORLD’S MOST SIGNIFICANT COLLECTIONS OF FORD AND SHELBY VEHICLES Miller Motorsports Park features an in-depth training center with the Ford Racing High-Performance Driving School, a Highway Survival Clinic, a teen driving academy, a Supermoto school, a karting school and many corporate programs. PROGRAMS INCLUDE: The Larry H. Miller Museum at Miller Motorsports Park represents the culmination of a lifetime of passion for Ford Racing. Miller Mustang GT Hot Laps Miller Motorsports Park Mustang Experience One, Two or Three Day Ford Racing High-Performance Driving School Our Signature Three Day Supercar Driving School PERFORMANCE TRAINING CENTER: 435-27-SPEED EVENT TICKETS OR INFORMATION: 435-277-RACE MILLERMOTORSPORTSPARK.COM MILLERMOTORSPORTSPARK. COM Voted “Motorsports Facility of the Year” in 2006 by the Professional MotorSport World Expo 25 minutes west of the Salt Lake Airport in the beautiful Tooele Valley of Utah M-0750-A2008 Printed in U.S.A.