Official Software
Get notified when we add a new DadiPioneer Manual
Summary of Content
English Français AVH-X7800BT AVH-X6800DVD Español DVD RDS AV RECEIVER RÉCEPTEUR A/V RDS DVD RADIO AV RDS CON DVD Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Owner’s Manual Manuel du propriétaire Manual de Instrucciones Important (numéro de série) Le numéro de série se trouve sous cet appareil. Pour votre sécurité et votre commodité, pensez à inscrire ce numéro sur la carte de garantie fournie. Importante (Número de serie) El número de serie está ubicado en la parte inferior de esta unidad. Para su seguridad y comodidad, asegúrese de registrar este número en la tarjeta de garantía incluida. < CRD4918-B > 1 English Contents ■ Registration and Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. connection of Bluetooth device................................13 ® Displaying the “Bluetooth” screen....................13 Registering your Bluetooth devices.................13 Connecting a registered Bluetooth device manually....................................................13 Switching visibility...........................................14 Entering the PIN code for Bluetooth wireless connection.................................................14 Displaying the device information....................14 Clearing the Bluetooth memory......................14 Updating Bluetooth software...........................14 Displaying the Bluetooth software version.......14 Switching the connected Bluetooth device......14 Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution...........................4 ■ Hands-free phoning..........15 Information to User...........................................4 Important safety information.............................5 Parking brake interlock......................................5 When using a display connected to rear monitor output...........................................................5 To avoid battery exhaustion...............................5 Rear view camera.............................................5 Handling the USB connector.............................6 Failure to operate..............................................6 Visit our website................................................6 Protecting the LCD panel and screen...............6 Notes on internal memory.................................6 About this manual.............................................6 Protecting your unit from theft...........................6 Use and care of the remote control...................7 ■ Basic operation...................8 2 Checking part names and functions..................8 Remote control.................................................8 Notes on using the LCD panel..........................8 Opening and closing the LCD panel..................9 Turning the LCD panel horizontally...................9 Adjusting the LCD panel slide position..............9 Adjusting the LCD panel angle..........................9 Inserting/ejecting/connecting media...............10 On first-time startup........................................10 How to use the screens...................................11 Supported AV source......................................12 Displaying the AV operation screen.................12 Selecting a source..........................................12 Changing the display order of sources............12 Using the touch panel.....................................12 < CRD4918-B > 2 Displaying the Phone menu screen.................15 Making a phone call........................................15 Receiving a phone call....................................16 Minimizing the dial confirmation screen..........16 Changing the phone settings..........................16 Using the voice recognition function (for iPhone)......................................................16 Setting phone book auto synchronization.......16 Notes for hands-free phoning..........................16 ■ Setup for iPod / iPhone or smartphone.......................17 The basic flow of iPod / iPhone or smartphone setup..........................................................17 Setting the device connection method............17 iPod compatibility............................................17 Android™ device compatibility.........................17 Information on the connections and functions for each device...........................................18 Operating the DVD menu................................21 Switching the subtitle/audio language.............21 Operating the DVD menu using touch panel keys...........................................................21 ■ Compressed files..............22 Starting procedure (for Disc)...........................24 Starting procedure (for USB)...........................24 Operations common to all file types................24 Audio file operations.......................................24 Still image file operations................................25 ■ iPod...................................25 Connecting your iPod......................................26 Starting procedure..........................................26 Selecting song or video sources from the playlist screen............................................26 Using this product’s iPod function from your iPod............................................................27 Selecting a song from the list related to the song currently playing (link search)............27 ■ AppRadioOne...................27 Using AppRadioOne.......................................27 Using the audio mix function...........................28 ■ Pandora®...........................28 Pandora operations.........................................29 Starting procedure..........................................29 Selecting a Pandora station from the list.........29 Adding a station..............................................29 Storing the preset stations..............................30 ■ Spotify®..............................30 Using Spotify with your Pioneer car audio/ video..........................................................31 Starting procedure..........................................31 Selecting a track or station from the list...........32 ■ Radio.................................19 ■ Bluetooth audio player.....32 Starting procedure..........................................19 Storing the strongest broadcast frequencies................................................19 Tuning into strong frequencies........................19 ■ Disc....................................20 Starting procedure..........................................21 Selecting files from the file name list...............21 Switching the media file type...........................21 Searching for the part you want to play...........21 Starting procedure..........................................32 Selecting files from the file name list...............33 ■ AUX source.......................33 Starting procedure..........................................33 Setting the video signal...................................33 ■ AV input.............................34 Starting procedure..........................................34 Setting the video signal...................................34 ■ MIXTRAX...........................34 MIXTRAX operation........................................34 MIXTRAX EZ operation..................................34 Displaying the “MIXTRAX Settings” screen.....35 Setting the flash pattern..................................35 ■ System settings................35 Displaying the “System” setting screen...........35 Setting Bluetooth audio source activation.......35 Setting Spotify source activation.....................35 Setting the ever scroll......................................35 Setting the beep tone......................................36 Setting the auto audio mix function.................36 Setting AppRadioOne Sound..........................36 Setting the rear view camera...........................36 Setting the demo mode...................................36 Selecting the system language.......................36 Setting the keyboard language with the application for iPhone................................36 Adjusting the response positions of the touch panel (touch panel calibration)...................37 Setting the dimmer..........................................37 Adjusting the picture.......................................37 Displaying the firmware version......................38 Displaying the open source licenses...............38 Updating firmware...........................................38 ■ Audio adjustments...........38 Displaying the “Audio” setting screen..............38 Using fader/balance adjustment......................38 Switching sound muting/attenuation...............38 Adjusting source levels...................................39 Using the auto level control.............................39 Adjusting loudness..........................................39 Setting the subwoofer output..........................39 Adjusting the cutoff frequency value...............39 Switching the rear speaker output...................39 Using BASS Boost..........................................39 Selecting the listening position........................39 Adjusting the speaker output levels finely........40 Adjusting the time alignment...........................40 Switching the time alignment preset................40 Using the equalizer.........................................40 Adjusting the equalizer curve automatically (Auto EQ)...................................................41 Saving the sound settings...............................42 Loading the sound settings.............................42 ■ T Sel Set Sel Sel ■ S p Set Set Set Set Dis c Dis c Aut Set c ■ F Cre Sel Rem ■ C Set Sto T Set Cha ■ O Res s ■ C Pre Pre Bef To p Not This Pow Spe Pow iPh iPh .34 34 .34 .34 .35 .35 35 .35 .35 .35 .35 .36 .36 .36 .36 .36 .36 .36 h .37 .37 .37 .38 .38 .38 38 .38 .38 .38 .39 .39 .39 .39 .39 .39 .39 .39 .40 .40 .40 .40 .41 .42 .42 Contents ■ Theme menu.....................42 Selecting the background display....................42 Setting the illumination color...........................42 Selecting the theme color................................43 Selecting the clock image...............................43 ■ Setting up the video player.................................43 Setting the top-priority languages...................43 Setting the angle icon display..........................43 Setting the aspect ratio...................................43 Setting parental lock.......................................44 Displaying your DivX VOD registration code...........................................................44 Displaying your DivX VOD deregistration code...........................................................44 Automatic playback of DVDs...........................44 Setting the video signal for the rear view camera.......................................................44 ■ Favorite menu...................45 Creating a shortcut.........................................45 Selecting a shortcut........................................45 Removing a shortcut.......................................45 ■ Common operations.........45 Setting the time and date................................46 Storing song information to an iPod (iTunes Tagging).....................................................46 Setting the “Sound Retriever” function.............46 Changing the wide screen mode.....................46 ■ Other functions.................47 Restoring this product to the default settings......................................................47 ■ Connection........................47 iPhone with 30-pin connector..........................50 Android device................................................50 Camera...........................................................50 External video component and the display......51 ■ Installation........................52 Precautions before installation........................52 Before installing..............................................52 Installation notes.............................................52 DIN front/rear-mount.......................................52 Installing the microphone................................53 Mounting on the sun visor...............................53 Installation on the steering column..................54 Adjusting the microphone angle......................54 ■ Appendix...........................54 Troubleshooting..............................................54 Error messages..............................................55 Handling and care of discs..............................57 Playable discs.................................................58 Detailed information for playable media..........58 Bluetooth........................................................61 WMA...............................................................61 FLAC...............................................................61 DivX................................................................61 AAC................................................................61 Android™.........................................................61 Detailed information regarding connected iPod devices.......................................................61 Using app-based connected content...............62 Pandora®.........................................................62 Spotify®...........................................................62 Notice regarding video viewing.......................62 Notice regarding DVD-Video viewing..............62 Notice regarding MP3 file usage.....................62 Using the LCD screen correctly.......................62 Specifications.................................................63 Precautions.....................................................47 Precautions before connecting the system......47 Before installing this product...........................47 To prevent damage.........................................47 Notice for the blue/white lead..........................48 This product....................................................48 Power cord......................................................48 Speaker leads.................................................49 Power amp (sold separately)...........................49 iPhone and smartphone..................................50 iPhone with Lightning connector.....................50 3 < CRD4918-B > 3 Precaution Information to User  MODEL NO. : AVH-X7800BT Contains FCC ID : AJDK071 Contains/Contient IC : 775E-K071  This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.  The Bluetooth antenna cannot be removed (or replaced) by user.  This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). MODEL NO. : AVH-X6800DVD This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.  Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. CAUTION This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. 4  Im W CAUTION—CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. WARNING This product contains chemicals known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling. The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a safe level— a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.  Set your volume control at a low setting.  Slowly increase the sound until you can hear it comfortably and clearly, without distortion.  Once you have established a comfortable sound level, set the dial and leave it there. < CRD4918-B >   ESTABLISH A SAFE LEVEL: 4 BE GU  D I t a e h  D E s l  I p o n p f  I p t t p t  D a a n i Bef the  e of l— yng ur ur e ly Precaution BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:  Do not turn up the volume so high that you can’t hear what’s around you.  Use caution or temporarily discontinue use in potentially hazardous situations.  Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.     Important safety information WARNING  Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.  Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.  If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.  If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.  Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal inspection, adjustments or repairs. Before using this product, be sure to read and fully understand the following safety information:  Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating < CRD4918-B > 5   this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments. Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles. To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied. Keep this manual handy as a reference for operating procedures and safety information. Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle. Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled. Never use headphones while driving. Parking brake interlock Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/ or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place, and (1) apply the parking brake, (2) release the parking brake, and then (3) apply the parking brake again. Please keep the brake pedal pushed down before releasing the parking brake. To ensure safe driving WARNING  LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.  Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.  To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.  In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake. When using a display connected to rear monitor output The video output terminal (rear monitor output) is for connection of a display to enable passengers in the rear seats to watch video images. WARNING NEVER install the rear display in a location that enables the driver to watch video images while driving. To avoid battery exhaustion Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery. WARNING Do not install this product in a vehicle that does not have an ACC wire or circuitry available. Rear view camera With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. WARNING  SCREEN IMAGE MAY APPEAR REVERSED.  USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. 5 Precaution CAUTION The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes. Handling the USB connector CAUTION  To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred.  Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product. Failure to operate Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact.  USA&CANADA Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404 For warranty information, please see the Limited Warranty sheet included with your product. Visit our website Visit us at the following site: http://www.pioneerelectronics.com http://www.pioneerelectronics.ca 1 Register your product. 2 Receive updates on the latest products and technologies. 3 Download owner’s manuals, order product catalogs, research new products, and much more. 4 Receive notices of software upgrades and software updates. < CRD4918-B >  Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.  When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.  To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently. About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. Meanings of Symbols Used in This Manual X0000BT Before removing the vehicle battery HOLD 6 Resetting the microprocessor CAUTION Pressing the RESET button resets settings and recorded contents to the factory settings.  Do not perform this operation when a device is connected to this product.  Some of the settings and recorded contents will not be reset. The microprocessor must be reset under the following conditions:  Prior to using this product for the first time after installation.  If this product fails to operate properly.  If there appears to be problems with the operation of the system.  If your vehicle position is shown on the map with a significant positioning error. 1 Turn the ignition switch OFF. 2 Press the RESET button with a pen tip or other pointed implement.  Refer to Checking part names and functions on page 8 Settings and recorded contents are reset to the factory settings. This indicates to touch and hold an appropriate soft key on the touch screen. This indicates that there is a reference or supplementary for the key or screen. Data subject to erasure The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself).  Some of the settings and recorded contents will not be reset. This indicates model name that are supported the described operations. This indicates to touch an appropriate soft key on the touch screen. Notes on internal memory  Some of the settings and recorded contents will not be reset. After-sales service for Pioneer products 6 Protecting the LCD panel and screen Re 1 The Mak the 2 If yo try a Forc Protecting your unit from theft The front panel can be detached to deter theft. Important  Handle the front panel with care when removing or attaching it.  Avoid subjecting the front panel to excessive shock.  Keep the front panel out of direct sunlight and high temperatures.  If removed, replace the front panel on the unit before starting up your vehicle.  To avoid damaging the device or vehicle interior, remove any cables and devices attached to the front panel before detaching it. Removing the front panel 1 Pinch the top and bottom of its right side and pull the front panel out. Take care not pinch it too tightly or to drop it, and also avoid contact with water or other fluids to prevent permanent damage. U co In Slid batt  Precaution Important  Do not store the remote control in high temperatures or direct sunlight.  Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal. rase ed ey - Re-attaching the front panel 1 Slide the front panel to the left. The front panel and the head unit are connected on the left side. Make sure that the front panel has been properly connected to the head unit. 2 Press the right side of the front panel until it is firmly seated. If you can’t attach the front panel to the head unit successfully, try again. Forcing the front panel into place may result in damage. t e re WARNING  Do not ingest the battery, Chemical Burn Hazard.  This product, including the supplied remote control, contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.  Keep new or used batteries out of the reach of children. If the battery is swallowed or placed inside any part of the body, consult a doctor immediately.  If the battery compartment does not close securely, stop using the product and keep it away from children.  Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. CAUTION Use and care of the remote control Installing the battery Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (–) poles aligned properly.  When using for the first time, pull out the film protruding from the tray. d  Remove the battery if the remote control is not used for a month or longer.  There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.  Do not handle the battery with metallic tools.  Do not store the battery with metallic objects.  If the battery leaks, wipe the remote control completely clean and install a new battery.  When disposing of used batteries, comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.  “Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)” Using the remote control Point the remote control in the direction of the front panel to operate.  The remote control may not function properly in direct sunlight. ge. 7 < CRD4918-B > 7 Basic operation Checking part names and functions 1 5 TRK ( / ) button 6 7 button OPEN/ CLOSE button 8 9 2 34 565 7 89 Press to return to the previous track (chapter) or go to the next track (chapter). Press and hold to perform fast reverse or fast forward. Press to answer or end a call. Press to display the top menu screen. Press and hold to activate the voice recognition function.  Refer to Using the voice recognition function (for iPhone) on page 16 Press OPEN/CLOSE to open the LCD panel. To close the LCD panel, press OPEN/CLOSE again. button Discloading slot 10 RESET button  Refer to Inserting and ejecting a disc on page 10  Refer to Resetting the microprocessor on page 6 6 Thumb pad 7 MUTE 8 AUDIO Changes the audio language, subtitle lanSUBTITLE guage or viewing angle during DVD playback. ANGLE 9 BAND/ ESC Returns to the specified point and begins playback from there. 11 Pauses or resumes playback. or For audio: Press and hold to perform fast reverse or fast forward. For video: Press to perform fast reverse or fast forward. or Press to return to the previous track (chapter) or go to the next track (chapter). Press to answer or end a call. Stops playback. If you resume playback, playback will start from the point where you stopped. Touch the key again to stop playback completely. 1 23 a 7 1 LCD screen 2 Volume/ SRC/OFF 3 4 8 DISP button MODE button Press to cycle through all the available sources. On the Application screen or navigation mode, press to display the side control bar. Press and hold to turn the display off. Press and hold to turn the source off. 4 5 6 9 a b Notes on using the LCD panel WARNING Volume (+/–) On the AV operation screen, press to turn the display off. On the Application screen or navigation mode, press to display the side control bar. Press and hold to turn the display off. p When the display is turned off, touch the screen to revert to the original screen. 2 MODE Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. 3 SRC Press to cycle through all the available sources. Press and hold to turn the source off. Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. 4 TOP MENU Returns to the top menu during DVD playback. 5 MENU Displays the DVD menu during DVD playback. 8 12 FOLDER/P. Selects the next or previous disc or folder. CH Recalls radio station frequencies assigned to preset channel keys. c 1 < CRD4918-B > Selects the tuner band when tuner is selected as a source. Cancels the control mode of functions. Switches between media file types when playing the data of Disc, USB. 10 RETURN Remote control 8 Selects a menu on the DVD menu.  Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.  Do not use with the LCD panel left open. It may result in injury in the event of an accident. CAUTION  Do not open or close the LCD panel by force. It may cause a malfunction.  Do not operate this product until the LCD panel has completely opened or closed. The LCD panel may stop at that angle for safety.  Do not place a glass or can on the open LCD panel. O pa The swi ope   — — —   1  Se To p veh wis aut 1 2   k. d y- st r) o Basic operation Opening and closing the LCD panel Turning the LCD panel horizontally The LCD panel will open or close automatically when the ignition switch is turned on or off. You can turn off the automatic close/ open function.  Do not close the LCD panel by force with your hands. That will cause a malfunction.  The automatic close/open function will operate the display as follows. — When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds. — When the ignition switch is turned ON again (or turned to ACC), the LCD panel will open automatically. — Removing or attaching the front panel will automatically close or open the LCD panel.  Protecting your unit from theft on page 6  When the ignition switch is turned OFF after the LCD panel has been closed, turning the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel.  When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage. When the LCD panel is upright and hinders the operation of the air conditioner, the panel can be turned horizontally temporarily. 1 Press OPEN/CLOSE to open the LCD panel.  To close the LCD panel, press OPEN/CLOSE again. Setting the automatic open function To prevent the display from hitting the shift lever of an automatic vehicle when it is in the P (park) position, or when you do not wish the display to open/close automatically, you can set the automatic open function to manual mode. t 2 Touch the flip down temporarily key to flip the LCD panel down to the horizontal position. Important  If you can hear the LCD panel knocking against your vehicle’s console or dashboard, touch the flip down temporarily key from the flap menu to temporarily level the LCD panel.  When adjusting the LCD panel angle, be sure to adjust from the flap menu. Forcibly adjusting the LCD panel by hand may damage it. Flips the LCD panel down to the horizontal position temporarily.  To return to the original position, press and hold OPEN/CLOSE.  The LCD panel returns to the original position automatically, indicated with a beeping sound 10 seconds after operation. Adjusting the LCD panel slide position You can adjust the LCD panel slide position so that the panel is set back or forward. 1 Press and hold OPEN/CLOSE to display the flap menu. 1 Press and hold OPEN/CLOSE to display the flap menu. 2 Touch the tilt down key or tilt up key to adjust the LCD panel to an easily viewable angle. 2 Touch the slide back key or slide front key to move the LCD panel back and forth. 1 Display the “System” setting screen. ally se 1 Press and hold OPEN/CLOSE to display the flap menu. Adjusting the LCD panel angle The LCD panel slides to the back. 2 Touch [Auto Flap].  On (default): The LCD panel will open or close automatically when the ignition switch is turned on or off.  Off: You have to press OPEN/CLOSE to open/close the LCD panel. The LCD panel slides to the front. Laying the panel down. 9 < CRD4918-B > 9 Basic operation Returning the panel to the upright position.  As the set angle is saved, the LCD panel will automatically be adjusted to the same position the next time the LCD panel is opened. Inserting/ejecting/connecting media On first-time startup 1 Start the engine to boot up the system. The “Select Program Language” screen appears. p From the second time on, the screen shown will differ depending on the previous conditions. 2 Touch the language. 3 Touch .   The “Speaker Mode Settings” screen appears. CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting and ejecting a disc Inserting a disc 1 Insert a disc into the disc-loading slot. Ejecting a disc 1 Press 2 USB storage device Check that no data is being accessed before pulling out the USB storage device. button to eject a disc. Plugging and unplugging a USB storage device p This product may not achieve optimum performance with some USB storage devices. p Connection via a USB hub is not possible. p A USB cable is required for connection. 1 Pull out the plug from the USB port of the USB cable. 2 Plug a USB storage device into the USB cable. 4 Touch the speaker modes.  Standard Mode 4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers.  Network Mode 3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands). WARNING Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to this unit. This may cause damage to the speakers. 5 Touch [OK]. The “Smartphone Setup” screen appears. 6 Touch the item.  Refer to Information on the connections and functions for each device on page 18 7 Touch .   The top menu screen appears. p Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting.  Refer to Restoring the default settings on page 47 Switching the speaker mode 1 2 To change the speaker mode, you need to restore this product to the default settings. 1 Restore the default setting. 10  Refer to Restoring the default settings on page 47 1 USB cable < CRD4918-B > 10 H Basic operation How to use the screens Application menu screen *4 Time and date setting screen 10 Abcdefg Abcdefg Abcdefg Abcdefg 6 2016 Month/Date 6/10 48 Setting menu screen Application operation screen Source Select Top menu screen *1 12hour 24hour *2 6/10 *4 System d/m/y m/d/y y/m/d Time Format 21 48 Depending on the connection method, the "smartphone setup" screen is displayed. Abcdefg 21 Abcdefg 21 48 AV operation screen iPod Abcdefg 6/10 21 48 Abcdefghi Abcdefg Abcdefghi Abcdefg ABC 6/10 21 48 99999/99999 You can control the iPhone or smartphone applications directly on this product. Recent application icons Pops iPod 9999’99” -9999’99” Phone menu screen Favorite source icons Phone Book *3 abcdefghi 3 abcdefghi... ABC A B abcdefghi AV source selection screen 6/10 21 48 Disc Pandora AUX iPod Spotify Radio AV Bluetooth Audio Camera View Source OFF *5 abcdefghi abcdefghi abcdefghi C D E F G Radio Power OFF 11 < CRD4918-B > 11 Basic operation *1 The top menu screen of this manual is the screen when using the AppRadioOne. The items displayed on the screen may vary depending on the connecting device or mode. When you connect an iPhone via Bluetooth wireless technology or a smartphone via USB cable, “Smartphone Setup” screen appears by touching [APPS]. *2 By pressing the button on any screen you can display the Top menu screen. *3 When you connect the external navigation system to this unit, the navigation mode key is displayed at the left bottom of the display. *4 *5 By pressing the MODE button you can switch between the Application screen and the AV operation screen. If you select “Power OFF”, you can turn off almost all functions. The “Power OFF” mode is released in the following cases:  An incoming call is received.  A rear view camera image is input when the vehicle reverses.  A button on this product is pressed.  The ignition switch is turned off (ACC OFF), then turned on (ACC ON). 2 Touch the AV operation key. The AV operation screen appears. Op 1 iPod 6/10 21 48 Abcdefghi Abcdefghi ABC Changing the display order of source keys Pops 99999/99999 9999’99” -9999’99” 1 Displays the source list. Selecting a source Source on the AV source selection screen 1 Display the “AV source selection” screen. Displaying the AV operation screen 1 Press . 2 Touch the source icon. p When you select “Source OFF”, the AV source is turned off. < CRD4918-B > 12 2 Touch p .   3 Drag the source key to the desired position. You can operate this product by touching the keys on the screen directly with your fingers. p To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. : Returns to the previous screen. : Closes the screen. Operating list screens 1 1 Display the source list. Music p When you select “Source OFF”, the AV source is turned off. Changing the display order of sources Changing the display order of source icons 2 Songs  Refer to Displaying the AV operation screen on page 12 Playlist abcdefghi Artist abcdefghi Alburm abcdefghi Video Songs Sw 1 Using the touch panel Source on the source list 2 Touch the source key. 1  Refer to Displaying the AV operation screen on page 12 Common touch panel keys 1 Display the “AV source selection” screen.   12 1 Display the source list.   Supported AV source You can play or use the following sources with this product.  Radio  CD  ROM (compressed audio files)  DVD-Video  USB The following sources can be played back or used by connecting an auxiliary device.  iPod  Spotify®  Pandora®  Bluetooth audio (AVH-X7800BT)  AV input (AV)  AUX 2 Touch and hold a source icon, and drag the icon to the desired position. 3 abcdefghi Podcast abcdefghi 1 Touching an item on the list allows you to narrow down the options and proceed to the next operation. 2 Appears when all characters are not displayed on the display area. If you touch the key, the rest are scrolled for display. 3 Appears when items cannot be displayed on a single page. The p Basic operation Drag the slider bar or the list to view any hidden items. Registration and connection of Bluetooth® device Operating the time bar on 1 e en 9999’99” -9999’99” 1 You can change the playback point by dragging the key. p Playback time corresponding to the position of the key is displayed while dragging the key. Switching the operation panel 1 Touch . X7800BT Displaying the “Bluetooth” screen 1 Press 2 Touch . p If you try to connect an unconnected cellular phone while two cellular phones are already connected, the first one of the two connected cellular phones will be disconnected and the unconnected cellular phone will be connected instead. Setting Bluetooth device auto connection   , and then The “Bluetooth” screen appears. .   Registering your Bluetooth devices This function connects the last connected Bluetooth device to this product automatically as soon as the two devices are less than a few meters apart. The default setting is “On”. p If two Bluetooth devices were connected the last time, the two devices are connected to this product automatically in the order that they are registered in the device list.   The hidden function keys appears. p This key does not appear for some AV sources. p If three devices are already paired, “Memory Full” is displayed. Delete a paired device first.  Refer to Deleting a registered device on page 13 1 Activate the Bluetooth wireless technology on your devices. the 2 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 13 3 Touch [Connection]. 4 Touch . e e. < CRD4918-B > 13 2 Touch [Auto Connect] to switch “On” or “Off”. Deleting a registered device CAUTION Never turn this product off while the paired Bluetooth device is being deleted.   1 Display the “Bluetooth” screen. The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found.  Refer to Displaying the “Bluetooth” screen on page 13 5 Touch the Bluetooth device name. 2 Touch [Connection]. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list. p If your device supports SSP (Secure Simple Pairing), a sixdigit number appears on the display of this product. Touch [Yes] to pair the device. p The Bluetooth connection can be also made by detecting this product from the Bluetooth device. Before registration, make sure that “Visibility” in the “Bluetooth” menu is set to “On”. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.  Refer to Switching visibility on page 14 p Two cellular phones can be connected to this product at the same time.  Refer to Switching the connected Bluetooth device on page 14 play 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 13 3 Touch .   Connecting a registered Bluetooth device manually Connect the Bluetooth device manually in the following cases:  Two or more Bluetooth devices are registered, and you want to manually select the device to be used.  You want to reconnect a disconnected Bluetooth device.  Connection cannot be established automatically for some reason. 1 Activate the Bluetooth wireless technology on your devices. 2 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 13 13 Registration and connection of Bluetooth® device 3 Touch [Connection]. CAUTION 4 Touch the name of the device. Never turn this product off while the Bluetooth memory is being cleared. Switching visibility  Refer to Displaying the “Bluetooth” screen on page 13 p To disconnect the device, touch the name of the connected device in the list. This function sets whether or not to make this product visible to the other device. The default setting is “On”. 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 13 2 Touch [Visibility] to switch “On” or “Off”. Entering the PIN code for Bluetooth wireless connection To connect your Bluetooth device to this product, you need to enter a PIN code. You can change the PIN code with this function. p The default PIN code is “0000”. 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 13 2 Touch [PIN Code Input]. 3 Touch [0] to [9] to input the pin code (up to 8 -digits). 4 Touch . 1 Display the “Bluetooth” screen. 2 Touch [Bluetooth Memory Clear]. 3 Touch [Clear]. The confirmation screen appears. Updating Bluetooth software This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website. p The source is turned off and the Bluetooth connection is disconnected before the process starts. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p You need to store the version update file to the USB storage device in advance. CAUTION Never turn this product off and never disconnect the phone while the software is being updated. 1 Connect the USB storage device stored the version update file to this unit.  Refer to Plugging and unplugging a USB storage device on page 10   2 Display the “Bluetooth” screen. Displaying the device information  Refer to Displaying the “Bluetooth” screen on page 13 1 Display the “Bluetooth” screen. Follow the on-screen instructions to finish updating the Bluetooth software. 2 Touch [Device Information]. Displaying the Bluetooth software version Clearing the Bluetooth memory If this product fails to operate properly, you may need to consult your dealer for repair. In such cases, perform the following procedure to check the software version on this unit.  Refer to Displaying the “Bluetooth” screen on page 13 The device name and address of the Bluetooth device on this product are displayed. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 3 Touch [BT Software Update]. 4 Touch [Start]. 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 13 14 < CRD4918-B > 14 2 Touch [Bluetooth Version Information]. The version of this product’s Bluetooth module appears. Switching the connected Bluetooth device After registering and connecting the Bluetooth devices to this product, you can switch among the devices using the switch devices key in the phone function and some audio sources. p You can register up to three Bluetooth devices on this product.  Refer to Registering your Bluetooth devices on page 13 p You can connect one of the registered devices to this product. In cases where the registered device is equipped with a phone function, a total of two devices can be connected at the same time when using the phone function. If two of the three registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. p The icon for the cellular phone currently being used is displayed on the “Phone menu” screen. If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. The contents of the phone menu are memorized for each connected cellular phone.  Refer to Hands-free phoning on page 15 p The switch devices key will appear for some audio sources. The audio source may automatically switch to another source depending on the selected device. h an ion en. Hands-free phoning *5 X7800BT Synchronizes the contacts on this product's phone book with the contacts on your phone manually. Phone Book *1 *2 *3 *4 *5 3 abcdefghi... *6 ABC A abcdefghi B abcdefghi C D abcdefghi ces ach F G abcdefghi Switches the search language to English or system language. s. If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. The following items are displayed on the key.  Name of the current cellular phone  List number of the current cellular phone  Battery status of the current cellular phone  Reception status of the current cellular phone  Refer to Switching the connected Bluetooth device on page 14 E abcdefghi *6 o Switches to the voice recognition function (for iPhone).  Refer to Using the voice recognition function (for iPhone) on page 16 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 15 2 Touch .   3 Touch the desired name on the list. 4 Touch the phone number. The dial screen appears and dialing starts. CAUTION For your safety, avoid talking on the phone as much as possible while driving. 5 Touch To use this function you need to connect your cellular phone to this product via Bluetooth in advance.  Refer to Registration and connection of Bluetooth® device on page 13 Dialing from the history Displaying the Phone menu screen *1 Switches to the preset dial screen.  Refer to Using the preset dial lists on page 15 *2 Switches to the phone book list.  Refer to Calling a number in the phone book on page 15 *3 Switches to the missed, received and dialed call lists.  Refer to Dialing from the history on page 15 Making a phone call *4 Switches the mode to enter the phone number directly.  Refer to Direct dialing on page 15 You can make a phone call in many different ways. 1 Press 2 Touch .   .   The Phone menu screen appears. Direct dialing 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 15 2 Touch .   3 Touch the number keys to enter the phone number. 4 Touch to make a call. 5 Touch to end the call. p You may hear a noise when you hang up the phone. < CRD4918-B > 15 Calling a number in the phone book p The contacts on your phone will be automatically transferred to this product. p “Visibility” of the “Bluetooth” screen should be on.  Refer to Switching visibility on page 14 p If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the phone book of the second phone is displayed. to end the call. 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 15 2 Touch .   3 Touch the item to switch the history list. The following items are available: : Received call list   : Dialed call list  : Missed call list 4 Touch the desired entry on the list to make a call. The dial screen appears and dialing starts. 5 Touch to end the call. Using the preset dial lists Registering a phone number You can easily store up to six phone numbers per device as presets. 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 15 2 Touch or .   On the “Phone Book” screen, touch the desired name to display the contact’s phone number. 15 Hands-free phoning 3 Touch 1 Display the “Bluetooth” screen. .   Dialing from the preset dial list  Refer to Displaying the “Bluetooth” screen on page 13 2 Touch [Auto Answer] to switch “On” or “Off”. Using the voice recognition function (for iPhone)  1 Display the “Bluetooth” screen. By connecting your iPhone to this product, you can use the voice recognition function (Siri Eyes Free Mode) on this product. p When an iPhone running iOS 6.1 or higher is used, Siri Eyes Free Mode is available with this product. p In this chapter, iPhone and iPod touch will be referred to as “iPhone”. Receiving a phone call 2 Touch [Ring Tone] to switch “On” or “Off”.  Refer to Displaying the Phone menu screen on page 15 p When two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed. Inverting names in the phone book 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 15 2 Touch .   3 Touch the desired item. The dial screen appears and dialing starts. 1 Touch to answer the call.  If you touch while getting a call waiting, you can switch to the talking person.  Touch to reject the call. 2 Touch to end the call. Minimizing the dial confirmation screen p The dial confirmation screen cannot be minimized on the AV operation screen. p AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call. 1 Touch  Touch again. .   to display the dial confirmation screen Changing the phone settings Setting auto answering You can select whether or not to answer a call automatically. The default setting is “Off”. p Even if an incoming call is received on the other connected phone while you are talking on the phone, the incoming call will not be answered automatically. 16 < CRD4918-B > 16 Switching the ring tone You can select whether or not to use this product’s ring tone. The default setting is “On”.  Refer to Displaying the “Bluetooth” screen on page 13 You can use this function to change the order of the first and last names in the phone book. 1 Display the “Phone menu” screen. 2 Touch  Re   .   The voice recognition function launches and the voice control screen appears. p You can also launch the voice recognition function by pressing and holding . p If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone. p If you want to use the voice recognition function (Siri Eyes Free Mode) on another connected iPhone, touch to switch to the other iPhone. The iPhone that you switch to will be set as the current device. Ma  —   1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 13 2 Touch [Invert Name]. Setting the private mode During a conversation, you can switch to private mode (talk directly on your cellular phone). 1 Touch off. or to turn private mode on or p If two cellular phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone. p When two cellular phones are connected to this product and private mode of the first phone is turned off, if an incoming call on the second phone is answered while a call is in progress on the first phone or while dialing or receiving a call on the first phone, the call, dialing, or receiving on the first phone is ended. Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. 1 Touch to switch between the three volume levels. 1 2 3 Setting phone book auto synchronization You can select whether or not to synchronize the the phone book with the contacts on your phone automatically when you connect the phone to this product. The default setting is “Off”. 1 Display the “Bluetooth” screen. —    Th    Refer to Displaying the “Bluetooth” screen on page 13 Ph 2 Touch [Phone Book Auto Synchronize] to switch “On” or “Off”.  Notes for hands-free phoning  General notes   Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.  The line-of-sight distance between this product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.  Hands-free phoning oice es Registration and connection as  Cellular phone operations vary depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.  When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product. Making and receiving calls ss- the t s 3 to ook e-  With some cellular phones, the ring sound may not be output from the speakers.  If private mode is selected on the cellular phone, hands-free phoning may be disabled.  You may hear a noise in the following situations: — When you answer the phone using the button on the phone. — When the person on the other end of the line hangs up the phone.  If the person on the other end of the line cannot hear the conversation due to an echo, decrease the volume level for hands-free phoning.  With some cellular phones, even after you press the accept button on the cellular phone when a call comes in, handsfree phoning may not be performed.  The registered name will appear if the phone number is already registered in the phone book. When one phone number is registered under different names, only the phone number will be displayed. Setup for iPod / iPhone or smartphone When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your device.  Refer to Setting the device connection method on page 17 2 Connect your device to this product.  Refer to Connection on page 47 3 If necessary, connect your device to this product via Bluetooth connection.  Refer to Registration and connection of Bluetooth® device on page 13 Setting the device connection method To use the application for iPhone or smartphone on this product, select the method for connecting your device. Settings are required according to the connected device. 1 Display the “System” setting screen. The received call and the dialed number histories  You cannot make a call to the entry of an unknown user (no phone number) in the received call history.  If calls are made by operating your cellular phone, no history data will be recorded in this product. 2 Touch [Input/Output settings]. Phone book transfers 3 Touch [Smartphone Setup].  If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely.  Depending on the phone, this product may not display the phone book correctly.  If the phone book in the phone contains image data, the phone book may not be transferred correctly.  Depending on the cellular phone, phone book transfer may not be available. nd 4 Touch the following settings.  Device: Select the device to be connected.  Connection / Application: Select the connection method.  Refer to Information on the connections and functions for each device on page 18 The setting will change after the following processes are automatically executed. — The source is turned off. — AppRadioOne is exited. — The smartphone connection (USB and Bluetooth) is disconnected. iPod compatibility This product supports only the following iPod models and iPod software versions. Others may not work correctly.  iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus: iOS 7.0 or later.  iPhone 3GS: iOS 6.0.1  iPod touch (4th, 5th generation): iOS 6.0.1  iPod touch (3rd generation): iOS 5.1.1  iPod touch (2nd generation): iOS 4.2.1  iPod classic 160GB (2009): Ver. 2.0.4  iPod classic 160GB (2008): Ver. 2.0.1  iPod classic 80GB: Ver. 1.1.2  iPod nano (7th generation)  iPod nano (6th generation): Ver. 1.2  iPod nano (5th generation): Ver. 1.0.2  iPod nano (4th generation): Ver. 1.0.4  iPod nano (3rd generation): Ver. 1.1.3 p You can connect and control an iPod compatible with this product by using separately sold connector cables. p Operation methods may vary depending on the iPod model and the software version. p Depending on the software version of the iPod, it may not be compatible with this product. For details about iPod compatibility with this product, refer to the information on our website. This manual applies to the following iPod models. iPod with 30-pin connector  iPhone 3GS, 4, 4s  iPod touch 2nd, 3rd, 4th generation  iPod classic 80GB, 160GB  iPod nano 3rd, 4th, 5th, 6th generation iPod with Lightning connector  iPhone 6, 6 Plus  iPhone 5, 5c, 5s  iPod touch 5th generation  iPod nano 7th generation Android™ device compatibility p Operation methods may vary depending on the Android device and the software version of the Android OS. p Depending on the version of the Android OS, it may not be compatible with this product. p Compatibility with all Android devices is not guaranteed. For details about Android device compatibility with this product, refer to the information on our website. 17 < CRD4918-B > 17 Setup for iPod / iPhone or smartphone Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows. iPod / iPhone with a 30-pin connector Device connection method Smartphone Setup When connecting via Bluetooth (AVH-X7800BT) When connecting via CD-IU51 (sold separately) Device iPhone / iPod iPhone / iPod iPhone / iPod Connection Wireless via BT USB USB Bluetooth connection is required. — — iPod (audio)    iPod (video) —  — Pandora    Spotify    Bluetooth connection Available sources When connecting via CD-IU201V (sold separately) iPod / iPhone with a Lightning connector Device connection method Smartphone Setup When connecting via Bluetooth (AVH-X7800BT) When connecting via CD-IU52 (sold separately) Device iPhone / iPod iPhone / iPod Connection Wireless via BT USB Bluetooth connection is required. — iPod (audio)   iPod (video) — — Pandora   Spotify   AppRadioOne —  When connecting via Bluetooth (AVH-X7800BT) When connecting via CD-MU200 (sold separately) Device Others Others Application USB/MTP AppRadioOne Bluetooth connection is required. — Pandora  — Spotify  — AppRadioOne —  When “Application” of “Smartphone Setup” is set to “AppRadioOne”. Bluetooth connection Available sources Android device Device connection method Smartphone Setup Bluetooth connection Available sources 18 < CRD4918-B > 18 H p p Radio Displays the preset channel list. Select an item on the list ("1" to "6") to switch to the preset channel. Selects the FM1, FM2, FM3 or AM band. Radio 1 2 3 4 5 6 FM1 6/10 1 Display the “AV source selection” screen. 21 48 Abcdefghi Abcdefghi 000.00 MHz Performs manual tuning. Performs seek tuning or non stop seek tuning. Releasing the key in a few seconds, skips to the nearest station from the current frequency. Keeping holding the key for a long seconds, performs non stop seek tuning. Recalls the preset channel stored to a key from memory. HOLD Starting procedure AM Abcdefghi HOLD p By keeping touching and holding or , you can perform non stop seek tuning. Touch again to cancel. Stores the current broadcast frequency to a key. Stores song information to an iPod.  Refer to Storing song information to an iPod (iTunes Tagging) on page 46 3 Touch [Radio settings]. 4 Touch [Local]. 5 Touch the item.  Off (default): Turns the seek tuning setting off.  Level1 to Level4: Sets the level of sensitivity for FM to Level1 to Level4 (for AM Level1 or Level2). p The FM “Level4” (AM “Level2”) setting allows reception of only stations with the strongest signals. 2 Touch [Radio]. The “Radio” screen appears. Storing the strongest broadcast frequencies The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6”. p Storing broadcast frequencies with BSM may replace those you have already saved. p Previously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit. 1 Touch 2 Touch .   to begin a search. While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys in order of their signal strength.  If you touch [Cancel], the storage process is canceled. Tuning into strong frequencies p This setting is available only when “Radio” is selected as the source. Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals. 1 Display the “System” setting screen. or , you can also switch the preset p By pressing channels. or and release, you can p By pressing and hold also perform seek tuning. 2 Touch [AV Source Settings]. < CRD4918-B > 19 19 Disc Track number indicator Hides the touch panel keys. To display again the keys, touch anywhere on the screen. Audio source screen 1 CD 6/10 21 48 Performs frame-by-frame playback. *1 ẂTrack 99 9999’99” Pause -9999’99” *2 HOLD Performs slow-motion playback. Stop Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2 99 DVD Switches between playback and pause. 6/10 Plays files in random order. This function is available for music CD. : Does not play tracks in random order. : Plays all tracks in random order. Audio source screen 2 21 48 ẂTrack 99 Sets a repeat play range. : Repeats the current disc. 20 L+R 99 ᵫᶓᶊᶒᶇᴾᶁᶆ 21 48 ᵫᵮᵣᵥᵋᵟ ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ ᵰᶃᶒᶓᶐᶌ 01 9999’99” Pause ᵐᵍᵐ -9999’99” : Repeats the current track. < CRD4918-B > 20 Sets a repeat play range. 21 48 : Repeats all files. Stop 99 99 ᵫᶓᶊᶒᶇᴾᶁᶆ Full 6/10 DVD V 6/10 Video source screen 1 Skips files forward or backward. CD Video source screen 2 ᵫᵮᵣᵥᵋᵟ 01 9999’99” Pause ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ OFF ᵏᵍᵐ -9999’99” Performs fast reverse or fast forward. Touch again to change play back the speed. Stops playback. *3 : Repeats the current chapter. *4 : Repeats the current title. *5 Changes the viewing angle (Multi-angle). This function is available for DVDs featuring multi-angle recordings. Selects the audio output from [L+R], [Left], [Right], [Mix]. This function is available for Video-CDs and DVDs recorded with LPCM audio. Disc Video source screen 2 DVD 6/10 21 48 Stop 99 L+R 99 ᵫᶓᶊᶒᶇᴾᶁᶆ ᵫᵮᵣᵥᵋᵟ 9999’99” ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ ᵰᶃᶒᶓᶐᶌ 01 Pause ᵐᵍᵐ -9999’99” *6 Resumes playback (Bookmark). This function is available for DVD-Video. You can memorize one point as a Bookmark for a disc (up to five discs). To clear the bookmark on the disc, touch and hold this key. Returns and begins playback from the specified point. This function is available for DVD-Video and Video-CDs featuring PBC (playback control). *1 Selects a track from the list.  Refer to Selecting files from the file name list on page 21 *2 Switches the media file type.  Refer to Switching the media file type on page 21 *3 Searches for the part you want to play.  Refer to Searching for the part you want to play on page 21 *4 Displays the DVD menu.  Refer to Operating the DVD menu on page 21 *5 Switches the subtitle/audio language.  Refer to Switching the subtitle/audio language on page 21 *6 Displays the DVD menu keypad.  Refer to Operating the DVD menu using touch panel keys on page 21 or , you can also skip files/chapters p By pressing forward or backward. or , you can also perform p By pressing and holding fast reverse or fast forward. appears. p If a Video-CD with PBC On is being played, p You can set the screen size for the video image.  Refer to Common operations on page 45 Starting procedure You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. 1 Insert the disc. The source changes and then playback will start.  Refer to Inserting and ejecting a disc on page 10 p If the disc is already set, select [Disc] as the playing source. Selecting files from the file name list 1 Touch .   2 Touch a track on the list to play back. Switching the media file type When playing a digital media containing a mixture of various media file types you can switch between media file types to play. 1 Touch .   2 Touch the item.  Music: Switches the media file type to music (compressed audio).  Video: Switches the media file type to video.  CD-DA: < CRD4918-B > 21 Switches the media file type to CD (audio data (CD-DA)). Searching for the part you want to play p For DVD-Videos, you can select [Title], [Chapter] or [10Key]. p For Video-CDs, you can select [Track] or [10Key] (PBC only). 1 Touch .   2 Touch the item to select the search function. 3 Touch [0] to [9] to input the desired number. p To cancel an input number, touch [C]. 4 Touch to start playback from the number you registered. Operating the DVD menu You can operate the DVD menu by touching the menu item on the screen directly. p This function may not work properly with some DVD disc content. In that case, use touch panel keys to operate the DVD menu. 1 Touch or .   2 Touch the desired menu item. Switching the subtitle/audio language 1 Touch or to change the language.  : Changes the subtitle language.  : Changes the audio language. p You can also switch the subtitle/audio languages using the “DVD/DivX Setup” menu.  Refer to Setting the top-priority languages on page 43 Operating the DVD menu using touch panel keys If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using those touch panel keys. 1 Touch .   2 Touch , menu item. , or to select the desired 21 Disc 3 Touch Compressed files .   p The way to display the menu differs depending on the disc.  If you touch directly. , you can operate the DVD menu Audio source screen 1 (Example: USB) USB 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Abcdefghi ABC Plays files in random order. *1 : Does not play files in random order. *2 : Plays all files within the repeat range in random order. *3 R&B 9999’99” -9999’99” Audio source screen 2 (Example: USB) USB 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Abcdefghi *4 Skips files forward or backward. Switches between playback and pause. Switches the current music information display. ABC R&B DB Sets a repeat play range. or : Repeats all files. : Repeats the current folder. : Repeats the current file. Selects the previous folder or the next folder. Constructs the database for using the Music Browse mode. This function is available only for USB. 22 < CRD4918-B > 22 V Compressed files Hides the touch panel keys. To display again the keys, touch anywhere on the screen. r. Video source screen (Example: Disc) ROM 6/10 21 48 Video source screen (Example: Disc) ROM *3 01 01 9999’99” Pause -9999’99” Sets a repeat play range. or Pause OFF -9999’99” *5 OFF : Repeats all files. *4 Selects the previous or next folder. Abcdefghi 9999’99” Full To display again the keys, touch anywhere on the screen. Rotates the displayed picture 90° clockwise. Full Stop Abcdefghi Hides the touch panel keys. 21 48 Stop Abcdefghi Abcdefghi 6/10 Performs fast reverse or fast forward. Touch again to change the playback speed. Switches between playback and pause. Still image screen USB Abcdefghi 6/10 21 48 *3 Abcdefghi Trimming : Repeats the current folder. . : Repeats the current file. Performs frame-by-frame playback. HOLD Performs slow-motion playback. Stops playback. *6 Sets a repeat play range. : Repeats all files. : Repeats the current folder. Plays files in random order. : Does not play files in random order. : Plays all files in the current repeat play range in random order. 23 < CRD4918-B > 23 Compressed files Still image screen USB Abcdefghi 6/10 *6 Saves the current image as the wallpaper.  Refer to Saving the image as the wallpaper on page 25 Abcdefghi *4 Skips files forward or backward. Switches between playback and pause. *1 Displays the MIXTRAX screen.  Refer to MIXTRAX on page 34 *2 Displays the link search screen. This function is available for the USB storage device only.  Refer to Selecting a song from the list related to the song currently playing (link search) on page 25 *4 Switches the subtitle/audio language. This function is available only for compressed video files stored on a disc.  Refer to Switching the subtitle/audio language on page 21 21 48 Trimming *3 *5 Selects a file from the list.  Refer to Selecting files from the file name list on page 24 p When you play compressed audio files stored in a USB storage device, you can search for a file using Music Browse.  Refer to Selecting a file using Music Browse mode on page 24 Switches the media file type.  Refer to Switching the media file type on page 24 You can play compressed audio, compressed video or still image files stored in a disc or a USB storage device.  Refer to Media compatibility chart on page 59 or , you can also skip files forward or p By pressing backward. or , you can perform fast p By pressing and holding reverse or fast forward. or on the still image file, p By pressing and holding you can search through 10 JPEG files at a time. If the file currently being played is the first or last file in the folder, the search is not performed. p JPEG images are not displayed in the rear display. p You can set the screen size for the video and JPEG images.  Refer to Common operations on page 45 CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. Starting procedure (for Disc) 1 Insert the disc. The source changes and then playback will start.  Refer to Inserting and ejecting a disc on page 10 p If the disc is already set, select [Disc] as the playing source. Starting procedure (for USB) 1 Display the “AV source selection” screen. 2 Plug the USB storage device.  Refer to Plugging and unplugging a USB storage device on page 10 3 Touch [USB]. 24 < CRD4918-B > 24 p Play back is performed in order of folder numbers. Folders are skipped if they contain no playable files. Operations common to all file types 4 Ref play 5 p Selecting files from the file name list You can find files or folders to play back using the file name or folder name list. 1 Touch .   2 Touch a file on the list to play back. p Touching a folder on the list shows its contents. You can play a file on the list by touching it. Se to se p Switching the media file type p When playing a digital media containing a mixture of various media file types you can switch between media file types to play.  1 Touch 2 .   1 2 Touch the item.  Music: Switches the media file type to music (compressed audio).  Video: Switches the media file type to video.  CD-DA: Switches the media file type to CD (audio data (CD-DA)).  Photo: Switches the media file type to still image (JPEG data). Audio file operations 3 St Sa You pro men 1 Selecting a file using Music Browse mode   2 You can select files to play back using the category list if the files contain tag information. p This function is available for the USB storage device only.  1 Touch  to create a database. DB Music Browse mode will be available after the database has been created. 2 Touch 3  .   3 Touch the desired category to display the file list. 4 s st Compressed files 4 Touch the item. p If you save the new image, the current wallpaper is overwritten. 5 Touch the desired song title or file name to play back. Setting the slideshow interval Refine the item until the desired song title or file name is displayed on the list. p If the selection made with Music Browse has been canceled, you can switch to Music Browse mode again by touching the [Tag] tab on the file/folder list screen and touching the desired track. r lay ay. ). les e iPod JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set. The default setting is “10sec”. p This setting is available during playback of the JPEG files. 1 Switch to Music Browse mode.  Refer to Selecting a file using Music Browse mode on page 24 iPod 3 Touch the item. The following items are available: 5sec, 10sec, 15sec, Manual. 21 48 ABC *1 *2 *3 Abcdefghi *4 Pops 99999/99999 9999’99” 2 Touch [Time Per Photo Slide]. 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ Abcdefghi 1 Display the “Video Setup” screen. Selecting a song from the list related to the song currently playing (link search) p If you touch the artwork, the list of songs in the album is displayed. p This function is available for the USB storage device only. Audio source screen 1 -9999’99” Skips files forward or backward. Switches between playback and pause. 2 Touch song information to open the list of songs. 3 Touch the song to play back. Still image file operations Saving the image as the wallpaper You can save the currently displayed image in the memory of this product and set it as the wallpaper for the AV screen or the top menu screen. 1 Display an image on the screen.  Refer to Starting procedure (for USB) on page 24  Refer to Operations common to all file types on page 24 2 Touch on the image. 3 Touch the following items.  As AVScreen: Saves the image as the wallpaper for the AV screen.  As HomeScreen: Saves the image as the wallpaper for the top menu screen.  As Both: Saves the image as the wallpaper for both the AV screen and top menu screen. 4 Touch “Yes” to overwrite the image. 25 < CRD4918-B > 25 iPod Changes the audiobook speed. 1 : Normal playback 2 : Fast playback Connecting your iPod Video source screen iPod 6/10 21 48 Abcdefghi 1/2 : Slow-motion playback *3 *4 99999/99999 Plays files in random order. Full : Plays randomly songs or videos within the selected list. 9999’99” Performs fast reverse or fast forward. iPod 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi *5 Abcdefghi ABC Displays the “MIXTRAX” screen.  Refer to MIXTRAX on page 34 *2 Displays the link search screen.  Refer to Selecting a song from the list related to the song currently playing (link search) on page 27 99999/99999 *3 Selects a song or video from the list.  Refer to Selecting song or video sources from the playlist screen on page 26 *4 Switches the control mode to “App Mode”.  Refer to Using this product’s iPod function from your iPod on page 27 *5 Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth. (AVH-X7800BT)  Refer to Switching the connected Bluetooth device on page 14 Sets a repeat play range. : Repeats all in the selected list. : Repeats the current song or video. or button, you can also skip files p By pressing the forward or backward. or button, you can also p By pressing and hold the perform fast reverse or fast forward. p You can set the screen size for the video image.  Refer to Common operations on page 45 Starting procedure p  Refer to Connecting your iPod on page 26 The source changes and then playback will start. p When connecting an iPhone or iPod touch, quit all applications before connecting the device. 2 Display the “AV source selection” screen. 1 2 p p 3 Touch [iPod]. Se re pl Selecting song or video sources from the playlist screen p You can search for the song or video you want to play from the playlist screen. 1 1 Touch .   2 Touch or category list. to switch the music or video 3 Touch the category. If you use English as the system language, the alphabet search function is available. Touch the initial search bar to use this function. 4 Touch the title of the list. < CRD4918-B > 26 U ti For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. If you can not find the desired song or video, try to search again according to the above steps. 26 p 1 Connect your iPod. *1 Pops x1 5 p You “Ap play play p CAUTION -9999’99” : Plays album randomly. Audio source screen 2 When connecting an iPod to this product, select the method for connecting your device. Settings are required according to the connected device.  Refer to Setup for iPod / iPhone or smartphone on page 17 p The available sources vary depending on the selected method for connecting your device.  Refer to Information on the connections and functions for each device on page 18 2 or e or ur ace a- s e iPod AppRadioOne 5 Start playback of the selected list. Displays the launcher application screen. p Depending on the generation or version of the iPod, some functions may not be available. p You can play playlists created with the MusicSphere application. The application is available on our website. Displays the previous screen. Using this product’s iPod function from your iPod AppRadioOne You can control this product’s iPod function from the iPod on “App Mode”. The application screen of the iPod can be displayed on this product, and the music files and video files are played back with this product. p This function is not available when using iPod function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iPod touch (5th generation). p While this function is in use, the iPod will not turn off even if the ignition key is turned off. Operate the iPod to turn off the power. 1 Touch Abcdefg Abcdefg Abcdefg Abcdefg Abcdefg 6/10 21 48 .   Displays the current source. 2 Operate the connected iPod to select a video or song and play. p Some functions are still accessible from this product even if the control mode is set to “App Mode”. However, the operation will depend on your applications. to switch the control mode. p Touch Selecting a song from the list related to the song currently playing (link search) p If you touch the artwork, the list of songs in the album is displayed. 1 Touch song information to open the list of songs. Displays the menu screen. p Press the DISP button to hide the App control side bar. Press the DISP button again to display it again. and are not available depending on the type of device. p WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. 2 Touch the song to play back. Using AppRadioOne You can control applications for an iPhone or a smartphone directly from the screen (AppRadioOne). In AppRadioOne, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product. p The compatible finger gestures vary depending on the application for an iPhone or a smartphone. h in p Even though an application is not compatible with AppRadioOne, depending on the application an image may be displayed. But you can not operate the application. To use AppRadioOne, install the AppRadio app on the iPhone or smartphone in advance. For details about the AppRadio app, visit the following site: For U.S.A. http://www.pioneerelectronics.com/AppRadioOne For Canada http://www.pioneerelectronics.ca/AppRadioOne p Be sure to read Using app-based connected content before you perform this operation.  Refer to Using app-based connected content on page 62  Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content.  The content and functionality of the supported applications are the responsibility of the App providers.  In AppRadioOne, functionality through the product is limited while driving, with available functions determined by the App providers.  Availability of AppRadioOne functionality is determined by the App provider, and not determined by Pioneer.  AppRadioOne allows access to applications other than those listed (subject to limitations while driving), but the extent to which content can be used is determined by the App providers. Starting procedure When connecting an iPhone or smartphone to this product, you must select the method for connecting your device. Settings are required according to the connected device.  Refer to Setup for iPod / iPhone or smartphone on page 17 For iPhone users 1 Connect your iPhone.  Refer to iPhone with Lightning connector on page 50 2 Press .   3 Touch [APPS]. When the application is ready to launch, messages appear on the screen of this product. 4 Use your iPhone to launch the application. The AppRadio app is launched. 5 Touch [OK]. The AppRadioOne screen (Application menu screen) appears. 27 < CRD4918-B > 27 AppRadioOne For smartphone (Android) users 1 Unlock your smartphone and connect it to this product via USB. Pandora® 2 Press the Volume (+/–) button.  Refer to Android device on page 50 2 Press Gives a “Thumbs Down” to the playing track and skips to the next track. The audio mix menu will be displayed on the screen. Playback screen 1 .   3 Touch [APPS]. The AppRadio app is launched, and the AppRadioOne screen (Application menu screen) appears. Common operation of all device p If you connect your device while an AppRadioOnecompatible application is already running, the application operation screen will appear on this product. p Touch the desired application icon after the AppRadio app is launched. p The desired application is launched, and the application operation screen appears. p Press to go back to the Top menu screen. Using the keyboard When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input the desired text directly from this product. CAUTION For your safety, the keyboard functionality is only available when the vehicle is stopped and the parking brake is engaged. APP Vol. 15 HD Radio Radio Vol. 12 1 2 1 Touch to mute. Touch again to unmute so that the sound is not mixed. 2 Adjusts the audio volume. Each touch of [+] or [–] increases or decreases the volume level. p The AV operation screen and the Application screen can be switched by pressing .   1 2 3 4 5 6 Pandora Pandora 6/10 21 48 Abcdefghi *1 Abcdefghi Abcde ABC Pause 9999’99”-9999’99” 1/2 Gives a “Thumbs Up” to the playing track. Skips tracks forward. Switches between playback and pause. p This function is only available in AppRadioOne on the iPhone. 1 Start up the AppRadioOne.  Refer to Starting procedure on page 27 2 Touch the text input area on the application operation screen. A keyboard for entering text appears. p The language of the keyboard can be changed.  Refer to Setting the keyboard language with the application for iPhone on page 36 Using the audio mix function You can output audio mixing AV source and an application for iPhone or smartphone when the AppRadioOne is used. p Depending on the application or the AV source, this function may not be available. 28 1 Start up the AppRadioOne. < CRD4918-B > 28 p p p 1 Pandora® Displays the preset station list. Select an item on the list ("1" to "6") to switch to the preset station. Playback screen 2 1 2 3 4 5 6 Pandora Pandora 6/10 21 48 Abcdefghi WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Abcdefghi Pandora operations Abcde ABC You can enjoy Pandora by connecting an iPhone or a smartphone that has the Pandora application installed. 2/2 *2 Adds information for the track currently playing to bookmarks. *3 Recalls the preset station stored to a key from memory. Important  Requirements to access Pandora using Pioneer car audio/ video  Refer to Setup for iPod / iPhone or smartphone on page 17  Please update the firmware of the Pandora application to the latest version before use. Download it from the iTunes App Store or Google Play.  Create a free or a paid account online. You can create the account in the Pandora application from your iPhone or from the website (http://www.pandora.com/account/ register).  To use the Pandora service, you need to connect to the Internet via 3G, EDGE, LTE (4G) or Wi-Fi network. If the data plan for your iPhone does not provide for unlimited data usage, additional charges from your carrier may apply. Limitations: *1 Selects a Pandora station from the list.  Refer to Selecting a Pandora station from the list on page 29 *2 Creates a new station.  Refer to Adding a station on page 29 *3 Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth. (AVH-X7800BT)  Refer to Switching the connected Bluetooth device on page 14 button, you can skip songs forward. p By pressing the and are not available when using a shared station. p p In this chapter, iPhone and iPod touch will be referred to as “iPhone”. < CRD4918-B > 29  Depending on the availability of the Internet, you may not be able to receive the Pandora service.  The Pandora service is subject to change without notice. The service could be affected by any of the following: firmware version of the iPhone, firmware version of the Pandora application, changes to the Pandora music service.  Certain functions of the Pandora service are not available when accessing the service through Pioneer car audio/ video products. They include, but are not limited to the following: creating new stations, deleting stations, sending information about current stations, buying tracks from iTunes, viewing additional text information, logging in to Pandora, adjusting Cell Network Audio Quality.  Pandora internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com  The Pandora mobile application is available for most iPhone and smartphone, please visit http://www.pandora. com/everywhere/mobile for the latest compatibility information. Starting procedure When connecting an iPhone or smartphone to this product, select the method for connecting your device. Settings are required according to the connected device.  Refer to Setup for iPod / iPhone or smartphone on page 17 p You can use the Pandora service by connecting an iPhone via USB or Bluetooth. p If you use a smartphone, connect via Bluetooth. (AVH-X7800BT)  Refer to iPhone with 30-pin connector on page 50  Refer to iPhone with Lightning connector on page 50  Refer to Registering your Bluetooth devices on page 13 1 Unlock and connect your device. 2 Display the “AV source selection” screen. 3 Touch [Pandora]. Selecting a Pandora station from the list 1 Touch .   The following items are available: : switches to the station list.   : switches to the genre list.  : plays only one track based on particular musical characteristics from several shuffled stations.  A-Z: sorts the items in the list alphabetically.  Date: sorts the items in the list in the order of the dates. : deletes the station.  p Shared stations are indicated by .   Adding a station 1 Touch .   29 Pandora® 2 Touch [Track] (from track) or [Artist] (from artist). A new station is created. Storing the preset stations You can store six stations to the preset keys “1” to “6”. 1 Touch . Spotify® Playback screen 1 (Track) Spotify Spotify 6/10 Plays tracks in random order. 21 48 Playback screen 2 (Track) Abcdefghi *1 Abcdefghi The current station is stored under a preset key. Spotify 6/10 21 48 Abcdefghi ABC   2 Touch and hold an item on the preset station list for a few seconds. Spotify PLAYING FROM PLAYLIST 9999 9999’99” -9999’99” Abcdefghi ABC PLAYING FROM PLAYLIST 9999 9999 Skips tracks forward or backward. Saves or deletes the current song information to or from “Your Music”. Switches between playback and pause. 30 < CRD4918-B > 30 *2 Sets a repeat play range. Switches to radio mode. P Spotify® Gives a “Thumbs Down” to the playing track and skips to the next track. Playback screen 1 (Radio mode) Spotify Spotify 6/10 21 48 Abcdefghi *1 Abcdefghi Playback screen 2 (Radio mode) Spotify Spotify ABC 6/10 21 48 Abcdefghi RADIO BASED ON 9999’99” Abcdefghi -9999’99” RADIO BASED ON Saves or deletes the current song information to or from “Your Music”. Switches between playback and pause. *2 To enjoy Spotify as you drive, first download the Spotify app to your iPhone or smartphone. You can download it from the iTunes App Store or Google Play. Choose a free account or a paid Premium account, either in the app or at spotify.com. A Premium account gives you more features, like offline listening. If you have Spotify already, please update the app so you have the latest version. Then connect your phone to your car. Now you can take your music on the road. Important ABC Skips tracks forward. Using Spotify with your Pioneer car audio/video Gives a “Thumbs Up” to the playing track. Starts new radio mode.  Confirm the requirements to access Spotify using Pioneer car audio/video.  Refer to Setup for iPod / iPhone or smartphone on page 17  To use Spotify, you need to connect to the Internet via 3G, EDGE, LTE (4G) or a Wi-Fi network. If the data plan for your iPhone or smartphone does not provide for unlimited data usage, additional charges from your carrier may apply.  For information on the countries and regions where Spotify can be used, take a look at https://www.spotify.com/us/ select-your-country/. Limitations: *1 Selects a track or station from the list.  Refer to Selecting a track or station from the list on page 32 *2 Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth. (AVH-X7800BT)  Refer to Switching the connected Bluetooth device on page 14 or button, you can also skip p By pressing the songs forward or backward. WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. < CRD4918-B > 31  Depending on the availability of the Internet, you may not be able to receive the Spotify service.  The Spotify service is subject to change without notice. The service could be affected by any of the following: firmware version of the iPhone or smartphone, firmware version of the Spotify application, changes to the Spotify music service.  Certain functions of the Spotify service are not available when accessing the service through Pioneer car audio/ video products.  Spotify is a music service not affiliated with Pioneer. More information is available at https://support.spotify.com/  The Spotify application is available for most iPhone and smartphone, please visit https://support.spotify.com/ for the latest compatibility information. Starting procedure When connecting an iPhone or smartphone to this product, select the method for connecting your device. Settings are required according to the connected device.  Refer to Setup for iPod / iPhone or smartphone on page 17 31 Spotify® p You can use the Spotify service by connecting an iPhone via USB or Bluetooth. p When using a smartphone, connect via Bluetooth. (AVH-X7800BT)  Refer to iPhone with 30-pin connector on page 50  Refer to iPhone with Lightning connector on page 50  Refer to Registering your Bluetooth devices on page 13 1 Unlock and connect your device. 2 Display the “System” setting screen. Bluetooth audio player X7800BT Bluetooth 6/10 21 48 Abcdefghi House 9999’99” -9999’99” 3 Touch [AV Source Settings]. Skips files forward or backward. Track number indicator Plays files in random order. 6 Touch [Spotify] on the AV source selection screen. Playback screen 2 Bluetooth 6/10 Selecting a track or station from the list 1 Touch .   The following items are available:  Your Music: Selects a track or station from the list of saved song information.  Browse: Selects a track from the category list.  Radio: Selects a station from the station list. *2 Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.  Refer to Switching the connected Bluetooth device on page 14 *1 Abcdefghi 9999 5 Display the “AV source selection” screen. Selects a file from the list.  Refer to Selecting files from the file name list on page 33 Playback screen 1 ABC 4 Confirm that “Spotify” is turned on. *1 21 48 Abcdefghi Starting procedure Abcdefghi ABC p Depending on the Bluetooth audio player connected to this product, the available operations with this product may be limited to the following two levels: — A2DP (Advanced Audio Distribution Profile): Only playing back songs on your audio player is possible. — A2DP and AVRCP (Audio/Video Remote Control Profile): Playing back, pausing, selecting songs, etc., are possible. or button, you can also skip files p By pressing the forward or backward. or button, you can also p By pressing and hold the perform fast reverse or fast forward. p Depending on the Bluetooth device connected to this product, the available operations with this product may be limited or differ from the descriptions in this manual. p While you are listening to songs on your Bluetooth device, please refrain from operating the phone function as much as possible. If you try operating, the signal may cause noise for song playback. p When you are talking on the Bluetooth device connected to this product via Bluetooth, it may pause playback. House 9999 p Before using the Bluetooth audio player, register and connect the device to this product.  Refer to Registering your Bluetooth devices on page 13 1 Pull out the connecting cable for using AppRadioOne. Sets a repeat play range. p You cannot use Bluetooth device when the connecting cable for using AppRadioOne is connected. 2 Display the “System” setting screen. *2 Switches between playback and pause. 3 Touch [AV Source Settings]. 4 Confirm that “Bluetooth Audio” is turned on. 5 Display the “AV source selection” screen. 32 < CRD4918-B > 32 6 Se na p 1 2 Bluetooth audio player h. ce is e ng ): ble. es so AUX source AUX 6/10 21 48 6 Touch [Bluetooth Audio] on the AV source selection screen. Setting the video signal When you connect this product to an AUX equipment, select the suitable video signal setting. The default setting is “Auto”. p You can operate this function only for the video signal input into the AUX input. 1 Display the “Video Setup” screen. Full Selecting files from the file name list p This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher. 1 Touch .   2 Touch a file or a folder on the list to play back. dited Switches between the video input and the sound input. 2 Touch [Video Signal Setting]. 3 Touch [AUX]. p A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection.  Refer to External video component and the display on page 51 4 Touch the item. The following items are available: Auto, PAL, NTSC, PAL-M, PAL-N, SECAM. CAUTION , h as for For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. to Starting procedure You can display the video image output by the device connected to video input. 1 Display the “System” setting screen. ble 2 Touch [Input/Output settings]. 3 Confirm that “AUX Input” is turned on. 4 Display the “AV source selection” screen. 5 Touch [AUX]. The image is displayed on the screen. 33 < CRD4918-B > 33 AV input You can display the video image output by the device connected to this product.  Refer to External video component and the display on page 51 CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. MIXTRAX 4 Touch the item. The following items are available: Auto, PAL, NTSC, PAL-M, PAL-N, SECAM. Activates the MIXTRAX mode. (Example: iPod) iPod 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Starting procedure 1 Display the “System” setting screen. ABC 2 3 Se Pops 99999/99999 9999’99” 1 The Abcdefghi You can display the video image output by the device connected to video input. D Se -9999’99” You The 1  Selects a track. 2 Touch [Input/Output settings]. 3 Set the setting to “On”. 4 Display the “AV source selection” screen. 5 Touch [AV]. The image is displayed on the screen. Setting the video signal When you connect this product to an AV equipment, select the suitable video signal setting. The default setting is “Auto”. p You can operate this function only for the video signal input into the AV input. 1 Display the “Video Setup” screen. 2 Touch [Video Signal Setting]. 34 3 Touch [AV]. < CRD4918-B > 34 Switches between playback and pause. p By pressing the or button, you can also skip files forward or backward. or button, you can also p By pressing and hold the perform fast reverse or fast forward. MIXTRAX operation MIXTRAX is original technology for creating non-stop mixes of selections from your audio library, complete with DJ effects that make them sound. MIXTRAX EZ operation You can use this unit to play iPod/USB audio files. MIXTRAX EZ is used to add a variety of sound effects between songs for arranging the pauses between songs. It allows you to enjoy listening to music non-stop.  This function is only available when a file on a USB storage device or a song on an iPod is being played.  This function is not available when the control mode is set to App Mode.  Depending on the file/song, sound effects may not be available.  Depending on the file/song, non-stop playback may not be available. 2 3 The Off Se You The 1  2 Se You forw The 1  2 Se You The 1 es so f hat MIXTRAX Displaying the “MIXTRAX Settings” screen 1 Press 2 Touch  Refer to Displaying the “MIXTRAX Settings” screen on page 35 2 Touch [Effect Setting]. 3 Touch the item. .   , and then [AV Source Settings]. 3 Touch [MIXTRAX Settings]. The “MIXTRAX Settings” screen appears. Setting the playback portion You can specify the playback portion. The default setting is “60s”. 1 Display the “MIXTRAX Settings” screen.  Refer to Displaying the “MIXTRAX Settings” screen on page 35 2 Touch [Short Playback Mode]. 3 Touch the item. The following items are available: Off, 60s, 90s, 120s, 150s, 180s, Random. Setting the display effect You can set the effect display for MIXTRAX. The default setting is “On”. 1 Display the “MIXTRAX Settings” screen.  Refer to Displaying the “MIXTRAX Settings” screen on page 35 2 Touch [Display Effect] to switch “On” or “Off”. Setting the cut-in effect You can set the effect tone that sounds when you skip tracks forward or backward. The default setting is “On”. 1 Display the “MIXTRAX Settings” screen. e  Refer to Displaying the “MIXTRAX Settings” screen on page 35 t to 2 Touch [Cut-In Effect] to switch “On” or “Off”. e System settings Setting the MIXTRAX effect The following items are available: Standard, Simple, Custom p When you select “Custom”, check the effect that you want. Setting the flash pattern The flashing color changes with the changes in the sound and bass levels. 1 Display the “MIXTRAX Settings” screen. Displaying the “System” setting screen 1 Press 2 Touch .   , and then .   The “System” setting screen appears. Setting Bluetooth audio source activation X7800BT  Refer to Displaying the “MIXTRAX Settings” screen on page 35 The default setting is “On”. 2 Touch [Flash Pattern].  Refer to Displaying the “System” setting screen on page 35 3 Touch the item.  Sound1 (default) to Sound6: The flash pattern changes according to the sound level. Select a desired mode.  L-Pass1 to L-Pass6: The flash pattern changes according to the bass level. Select a desired mode.  Random1: The flash pattern changes randomly according to the sound level mode and low pass mode.  Random2: The flash pattern changes randomly according to the sound level mode.  Random3: The flash pattern changes randomly according to the low pass mode.  Off: The flash pattern does not flash. 1 Display the “System” setting screen. 2 Touch [AV Source Settings]. 3 Touch [Bluetooth Audio] to switch “On” or “Off”. Setting Spotify source activation The default setting is “On”. 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [AV Source Settings]. 3 Touch [Spotify] to switch “On” or “Off”. Setting the ever scroll When “Ever Scroll” is set to “On”, the recorded text information scrolls continuously in the display while the vehicle is stopped. The default setting is “Off”. 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [Ever Scroll] to switch “On” or “Off”. You can set and play back the MIXTRAX effect that you want. The default setting is “Standard”. 1 Display the “MIXTRAX Settings” screen. < CRD4918-B > 35 35 System settings Setting the beep tone Setting the rear view camera The default setting is “On”. A separately sold rear view camera (e.g. ND-BC8) is required for utilizing the rear view camera function. (For details, consult your dealer.) 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [Beep Tone] to switch “On” or “Off”. Setting the auto audio mix function You can select whether or not to activate the auto audio mix function. If the auto audio mix function is activated, this product automatically switches between mixing or not mixing the AV source sound and the sound output from your iPhone or smartphone according to the mixing property, such as that of the mixed sound or solo sound of the foreground application on your iPhone or smartphone. The default setting is “On”. 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [Auto Mix] to switch “On” or “Off”. Setting AppRadioOne Sound You can set where the sound for AppRadioOne is output when it is used with an Android device. 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [Input/Output settings]. 3 Touch [AppRadioOne Sound]. 4 Touch the following settings.  AVH (default): The sound is output from the speakers of this unit.  Smartphone: The sound is output from the speakers of the Android device. p With an iPhone, the sound is always output from the speakers of this unit. Rear view camera Setting the polarity of the rear view camera p This function is available when “Back Camera Input” is “On”.  Refer to Setting rear view camera activation on page 36 This product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle, when the shift lever is in the REVERSE (R) position.  Refer to Displaying the “System” setting screen on page 35 Camera for Camera View mode 2 Touch [Camera settings]. Camera View mode also allows you to check what is behind you while driving. To display the camera image, touch [Camera View] on the “AV source selection” screen.  Refer to Source on the AV source selection screen on page 12 p To set the rear view camera as the camera for Camera View mode, set “Back Camera Input” to “On”.  Refer to Setting rear view camera activation on page 36 CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. p Immediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position. p When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in “Camera Polarity”. while the camera image is displayed, the p If you touch displayed image will turn off temporarily. 1 Display the “System” setting screen. 3 Touch [Camera Polarity]. < CRD4918-B > 36 2 3 Afte A ti pa  Battery (default): The polarity of the connected lead is positive.  Ground: The polarity of the connected lead is negative. If yo the resp p Setting the demo mode p The default setting is “On”. p 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [Demo Mode] to switch “On” or “Off”. Selecting the system language  If the embedded language and the selected language setting are not the same, text information may not display properly.  Some characters may not be displayed properly. 1 Display the “System” setting screen. 1  2 3 4 5 Setting rear view camera activation  Refer to Displaying the “System” setting screen on page 35 The The default setting is “Off”. 2 Touch [System Language]. Pro 1 Display the “System” setting screen. 3 Touch the language.  Refer to Displaying the “System” setting screen on page 35 After the language is selected, the previous screen returns. 2 Touch [Camera settings]. Setting the keyboard language with the application for iPhone 3 Touch [Back Camera Input] to switch “On” or “Off”. You can use the keyboard in AppRadioOne by setting the language of the keyboard for iPhone. p This function is only available in AppRadioOne on the iPhone. 1 Display the “System” setting screen. 36  6 7 The   8 The w ing ly. e e System settings  Refer to Displaying the “System” setting screen on page 35 2 Touch [Keyboard]. 3 Touch the language. Setting the dimmer p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. Setting the dimmer trigger  Refer to Displaying the “System” setting screen on page 35 After the language is selected, the previous screen returns. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. Adjusting the response positions of the touch panel (touch panel calibration) 1 Display the “System” setting screen. If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p Do not use sharp pointed tools such as a ballpoint or mechanical pen, which could damage the screen. p Do not turn off the engine while saving the adjusted position data. 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [Touch panel calibration]. 3 Touch [Yes]. 4 Touch two corners of the screen along the arrows, and then touch the centers of two + marks at the same time twice. 5 Press .   The adjustment results are saved. 6 Press once again. Proceed to 16-point adjustment. 7 Gently touch the center of the “+” mark displayed on the screen. The target indicates the order.  When you press tion returns. , the previous adjustment posi-  When you press and hold canceled. 8 Press and hold , the adjustment is .   The adjustment results are saved. < CRD4918-B > 37  Refer to Displaying the “System” setting screen on page 35 2 Touch [Dimmer Settings]. 3 Touch [Dimmer Trigger]. 4 Touch the item.  Auto (default): Switches the dimmer to on or off automatically according to your vehicle’s headlight turning on or off.  Manual: Switches the dimmer to on or off manually.  Time: Switches the dimmer to on or off at the time you adjusted. Setting the dimmer duration in day or night p You can use this function when “Dimmer Trigger” is set to “Manual”. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. 1 Display the “System” setting screen. 2 Touch [Dimmer Settings]. 3 Touch [Dimmer Duration]. The “Duration Setting” screen appears. 4 Drag the cursors to set the dimmer duration.  You can also set the dimmer duration touching or . or moves the cursor backEach touch of ward or forward in the 15 minute width.   p The default setting is 18:00-6:00 (6:00 PM-6:00 AM). p When the cursors are placed on the same point, the dimmer available time is 0 hours. p When the cursor for off time setting is placed on the left end and the cursor for on time setting is placed on the right end, the dimmer available time is 0 hours. p When the cursor for on time setting is placed on the left end and the cursor for off time setting is placed on the right end, the dimmer available time is 24 hours. p The time display of the dimmer duration adjusting bar is depending on the clock display setting.  Refer to Setting the time and date on page 46 Adjusting the picture 1 Display the “System” setting screen. You can adjust the picture for each source and rear view camera. 2 Touch [Dimmer Settings]. For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake.  Refer to Displaying the “System” setting screen on page 35 3 Touch [Day/Night] to switch the following items.  Day (default): Turns the dimmer manually to off.  Night: Turns the dimmer manually to on. Setting the dimmer duration optional You can adjust the time that the dimmer is turned on or off. p You can use this function when “Dimmer Trigger” is set to “Time”. CAUTION 1 Display the screen you wish to adjust. 2 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 3 Touch [Picture Adjustment]. 4 Touch the item to select the function to be adjusted.  Brightness: Adjusts the black intensity. (–24 to +24)  Contrast: Adjusts the contrast. (–24 to +24) 37 System settings  Color: Adjusts the color saturation. (–24 to +24)  Hue: Adjusts the tone of color (which color is emphasized, red or green). (–24 to +24)  Dimmer: Adjusts the brightness of the display. (+1 to +48)  Temperature: Adjusts the color temperature, resulting in a better white balance. (–3 to +3) p With some pictures, you cannot adjust Hue and Color.  When you touch [Rear View], the mode changes to the selected camera mode. By touching [Source], [Navi] or [Apps], you can return to the selected mode. 5 Touch , , , to adjust. p The adjustments of “Brightness”, “Contrast” and “Dimmer” are stored separately when your vehicle’s headlights are off (daytime) and on (nighttime). p “Brightness” and “Contrast” are switched automatically depending on whether the vehicle’s headlights are on or off. p “Dimmer” can be changed the setting or the time to switch it to on or off.  Refer to Setting the dimmer on page 37 p The picture adjustment may not be available with some rear view cameras. p The setting contents can be memorized separately. Displaying the firmware version 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 2 Touch [System Information]. 3 Touch [Firmware Information]. The “Firmware Information” screen appears. Displaying the open source licenses 1 Display the “System” setting screen.  Refer to Displaying the “System” setting screen on page 35 38 2 Touch [System Information]. < CRD4918-B > 38 3 Touch [License]. The open source licenses of the functions that this product is equipped with appear. Updating firmware CAUTION  The USB storage device for updating must contain only the correct update file.  Never turn this product off, disconnect the USB storage device while the firmware is being updated.  You can only update the firmware when the vehicle is stopped and the parking brake is eng