Official Software
Get notified when we add a new DadiPioneer Manual
Summary of Content
English Français AVH-X5800BHS AVH-X4800BS AVH-X3800BHS AVH-X2800BS AVH-X1800S Español DVD RDS AV RECEIVER RÉCEPTEUR A/V RDS DVD RADIO AV RDS CON DVD Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Owner’s Manual Manuel du propriétaire Manual de Instrucciones Important (numéro de série) Le numéro de série se trouve sous cet appareil. Pour votre sécurité et votre commodité, pensez à inscrire ce numéro sur la carte de garantie fournie. Importante (Número de serie) El número de serie está ubicado en la parte inferior de esta unidad. Para su seguridad y comodidad, asegúrese de registrar este número en la tarjeta de garantía incluida. < CRD4924-A > 1 English Contents ■ Registration and Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Display the Radio settings screen...................21 connection of Bluetooth device................................12 ® Displaying the “Bluetooth” screen....................12 Registering your Bluetooth devices.................12 Connecting a registered Bluetooth device manually....................................................12 Switching visibility...........................................13 Entering the PIN code for Bluetooth wireless connection.................................................13 Displaying the device information....................13 Clearing the Bluetooth memory......................13 Updating Bluetooth software...........................13 Displaying the Bluetooth software version.......13 Switching the connected Bluetooth device......13 Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution...........................4 ■ Hands-free phoning..........14 Information to User...........................................4 License, Warranty Disclaimer & Limitation of Liability.........................................................5 Important safety information.............................5 Parking brake interlock......................................5 When using a display connected to V OUT.......6 To avoid battery exhaustion...............................6 Rear view camera.............................................6 Handling the USB connector.............................6 Failure to operate..............................................6 Visit our website................................................6 Protecting the LCD panel and screen...............6 Notes on internal memory.................................6 About this manual.............................................7 Use and care of the remote control...................7 ■ Basic operation...................7 Checking part names and functions..................7 Remote control.................................................8 Notes on using the LCD panel..........................8 Adjusting the LCD panel angle..........................8 Inserting/ejecting/connecting media.................8 On first-time startup..........................................9 How to use the screens...................................10 Supported AV source......................................11 Displaying the AV operation screen.................11 Selecting a source..........................................11 Changing the display order of sources............11 Using the touch panel.....................................11 2 < CRD4924-A > 2 Displaying the Phone menu screen.................14 Making a phone call........................................14 Receiving a phone call....................................15 Minimizing the dial confirmation screen..........15 Changing the phone settings..........................15 Using the voice recognition function (for iPhone)......................................................15 Setting phone book auto synchronization.......15 Notes for hands-free phoning..........................16 ■ Setup for iPod / iPhone or smartphone.......................16 The basic flow of iPod / iPhone or smartphone setup..........................................................16 Setting the device connection method............16 iPod compatibility............................................17 Android™ device compatibility.........................17 Information on the connections and functions for each device...........................................18 ■ Radio.................................19 Starting procedure..........................................19 Storing the strongest broadcast frequencies................................................19 Tuning into strong frequencies........................19 ■ HD Radio™.........................20 HD Radio stations...........................................20 Starting procedure..........................................21 Storing the strongest broadcast frequencies................................................21 ■ Disc....................................21 Starting procedure..........................................23 Selecting files from the file name list...............23 Switching the media file type...........................23 Searching for the part you want to play...........23 Operating the DVD menu................................23 Switching the subtitle/audio language.............23 Operating the DVD menu using touch panel keys...........................................................23 ■ Compressed files..............24 Starting procedure (for Disc)...........................26 Starting procedure (for USB)...........................26 Operations common to all file types................26 Audio file operations.......................................26 Still image file operations................................26 ■ iPod...................................27 Connecting your iPod......................................28 Starting procedure..........................................28 Selecting song or video sources from the playlist screen............................................28 Using this product’s iPod function from your iPod............................................................28 Selecting a song from the list related to the song currently playing (link search)............28 ■ AppRadioOne...................29 Using AppRadioOne.......................................29 Using the audio mix function...........................29 ■ Pandora®...........................30 Pandora operations.........................................31 Starting procedure..........................................31 Selecting a Pandora station from the list.........31 Adding a station..............................................31 Storing the preset stations..............................31 ■ Spotify®..............................32 Using Spotify with your Pioneer car audio/ video..........................................................33 Starting procedure..........................................33 Selecting a track or station from the list...........33 ■ Bluetooth audio player.....34 Starting procedure..........................................34 Selecting files from the file name list...............34 ■ SiriusXM® Satellite Radio.................................35 SiriusXM tuner operations...............................35 Starting procedure..........................................36 Selecting a channel from a list of all channels....................................................36 Selecting a channel from the category list.......36 Switching the displayed list.............................36 Setting TuneStart™..........................................36 Using TuneScan™............................................36 Using category scan.......................................36 Using TuneMix™..............................................36 About SmartFavorites.....................................36 Using iTunes Tagging......................................36 Activating the Traffic & Weather Now...............37 Displaying the “SiriusXM settings” screen.......37 Using SportsFlash™ list...................................37 Using Featured Favorites Band.......................37 Restoring the “SiriusXM Settings” to the default........................................................38 ■ AUX source.......................38 Starting procedure..........................................38 Setting the video signal...................................39 ■ AV input.............................39 Starting procedure (for AV source)..................39 Starting procedure (for camera)......................39 Setting the video signal...................................39 ■ MIXTRAX...........................40 MIXTRAX operation........................................40 MIXTRAX EZ operation..................................40 Displaying the “MIXTRAX Settings” screen.....40 Setting the flash pattern..................................40 ■ System settings................41 Displaying the “System” setting screen...........41 Setting Bluetooth audio source activation.......41 Setting Spotify source activation.....................41 Setting the ever scroll......................................41 Setting the beep tone......................................41 Setting the auto audio mix function.................41 Setting the rear view camera...........................41 Setting the demo mode...................................41 Selecting the system language.......................42 Setting the keyboard language with the application for iPhone................................42 Adj p Set Adj Dis Dis Upd ■ A Dis Usi Swi Adj Usi Adj Set Adj Swi Usi Sel Adj Adj Swi Usi Adj ( Sav Loa ■ T Sel Set Sel Sel ■ S p Set Set Set Set Dis c Dis c Aut Set c ■ F 35 .35 .36 .36 .36 .36 .36 .36 .36 .36 .36 .36 .37 .37 .37 .37 .38 38 .38 .39 39 .39 .39 .39 40 .40 .40 .40 .40 41 .41 .41 .41 .41 .41 .41 .41 .41 .42 .42 Contents Adjusting the response positions of the touch panel (touch panel calibration)...................42 Setting the dimmer..........................................42 Adjusting the picture.......................................43 Displaying the firmware version......................43 Displaying the open source licenses...............43 Updating firmware...........................................43 ■ Audio adjustments...........44 Displaying the “Audio” setting screen..............44 Using fader/balance adjustment......................44 Switching sound muting/attenuation...............44 Adjusting source levels...................................44 Using the auto level control.............................44 Adjusting loudness..........................................44 Setting the subwoofer output..........................44 Adjusting the cutoff frequency value...............44 Switching the rear speaker output...................45 Using BASS Boost..........................................45 Selecting the listening position........................45 Adjusting the speaker output levels finely........45 Adjusting the time alignment...........................45 Switching the time alignment preset................45 Using the equalizer.........................................46 Adjusting the equalizer curve automatically (Auto EQ)...................................................46 Saving the sound settings...............................47 Loading the sound settings.............................47 ■ Theme menu.....................47 Selecting the background display....................47 Setting the illumination color...........................47 Selecting the theme color................................48 Selecting the clock image...............................48 ■ Setting up the video player.................................48 Setting the top-priority languages...................48 Setting the angle icon display..........................48 Setting the aspect ratio...................................49 Setting parental lock.......................................49 Displaying your DivX VOD registration code...........................................................49 Displaying your DivX VOD deregistration code...........................................................49 Automatic playback of DVDs...........................50 Setting the video signal for the rear view camera.......................................................50 ■ Favorite menu...................50 < CRD4924-A > 3 Creating a shortcut.........................................50 Selecting a shortcut........................................50 Removing a shortcut.......................................50 ■ Common operations.........51 Setting the time and date................................51 Storing song information to an iPod (iTunes Tagging).....................................................51 Setting the “Sound Retriever” function.............51 Changing the wide screen mode.....................51 ■ Other functions.................52 Restoring this product to the default settings......................................................52 ■ Connection........................52 Precautions.....................................................52 Precautions before connecting the system......52 Before installing this product...........................53 To prevent damage.........................................53 Notice for the blue/white lead..........................53 This product....................................................53 Power cord......................................................54 Speaker leads.................................................54 Power amp (sold separately)...........................55 iPhone and smartphone..................................55 iPhone with Lightning connector.....................55 iPhone with 30-pin connector..........................55 Android device................................................56 Camera...........................................................56 External video component and the display......56 SiriusXM® satellite radio..................................65 HD Radio™ Technology...................................65 WMA...............................................................65 FLAC...............................................................66 DivX................................................................66 AAC................................................................66 Android™.........................................................66 Detailed information regarding connected iPod devices.......................................................66 Using app-based connected content...............66 Pandora®.........................................................67 Spotify®...........................................................67 Notice regarding video viewing.......................67 Notice regarding DVD-Video viewing..............67 Notice regarding MP3 file usage.....................67 Using the LCD screen correctly.......................67 Specifications.................................................68 ■ Installation........................57 Precautions before installation........................57 Before installing..............................................57 Installation notes.............................................57 Installation using the screw holes on the side of this product................................................57 Installing the microphone................................58 Mounting on the sun visor...............................58 Installation on the steering column..................58 Adjusting the microphone angle......................58 ■ Appendix...........................59 Troubleshooting..............................................59 Error messages..............................................60 Handling and care of discs..............................62 Playable discs.................................................62 Detailed information for playable media..........63 Bluetooth........................................................65 3 Precaution Information to User  MODEL NO. : AVH-X5800BHS, AVH-X4800BS, AVHX3800BHS, AVH-X2800BS Contains FCC ID : AJDK071 Contains/Contient IC : 775E-K071  This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.  The Bluetooth antenna cannot be removed (or replaced) by user.  This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). MODEL NO.: AVH-X1800S This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.  Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. CAUTION This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. 4  Li Li CAUTION—CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. SA Di WARNING This product contains chemicals known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling. The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a safe level— a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.  Set your volume control at a low setting.  Slowly increase the sound until you can hear it comfortably and clearly, without distortion.  Once you have established a comfortable sound level, set the dial and leave it there. < CRD4924-A >   ESTABLISH A SAFE LEVEL: 4 BE GU THE WA OR AND WA LIM FITN Lim TO APP WIL ANY OR ACT NEG OF TO LAW ANY OF ANY DAM FOR OR NEG LEG (US of l— yng ur ur e ly Precaution BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:  Do not turn up the volume so high that you can’t hear what’s around you.  Use caution or temporarily discontinue use in potentially hazardous situations.  Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas. License, Warranty Disclaimer & Limitation of Liability SAFETY PROVISIONS Disclaimer THE WARRANTIES SET FORTH IN PIONEER’S LIMITED WARRANTY ARE THE ONLY WARRANTIES MADE BY PIONEER OR ANY OF ITS LICENSORS, AS APPLICABLE. PIONEER AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Limitation of Liability TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE LAW, NEITHER PIONEER NOR ITS LICENSORS WILL BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR ANY INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE, OR SPECIAL DAMAGES, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING NEGLIGENCE, EVEN IF SUCH PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE LAW, PIONEER’S, OR ITS LICENSORS’, TOTAL LIABILITY OF ANY KIND ARISING OUT OF OR RELATED TO YOUR USE OF THE PRODUCTS, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY CLAIMS, OR ANY CLAIMS FOR PROPERTY DAMAGE, DEATH OR DISABILITY, REGARDLESS OF THE FORUM AND REGARDLESS OF WHETHER ANY ACTION OR CLAIM IS BASED ON CONTRACT, TORT, (INCLUDING NEGLIGENCE), STRICT PRODUCT LIABILITY, OR ANY OTHER LEGAL THEORY, WILL NOT EXCEED ONE THOUSAND DOLLARS (USD$1 000). SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF DAMAGES OR LIMITATION OF LIABILITY, SO THE ABOVE EXCLUSIONS OR LIMITATIONS, TO THE EXTENT PROHIBITED BY APPLICABLE LAW, MAY NOT APPLY TO YOU. YOUR SPECIFIC RIGHTS MAY VARY FROM JURISDICTION TO JURISDICTION. Important safety information WARNING  Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.  Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.  If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.  If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.  Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal inspection, adjustments or repairs. Before using this product, be sure to read and fully understand the following safety information:  Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.  Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles.  To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied.  Keep this manual handy as a reference for operating procedures and safety information.  Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.  Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.  Never use headphones while driving. Parking brake interlock Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/ or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place, and (1) apply the parking brake, (2) release the parking brake, and then (3) apply the parking brake again. Please keep the brake pedal pushed down before releasing the parking brake. To ensure safe driving WARNING  LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.  Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.  To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the 5 < CRD4924-A > 5 Precaution driver.  In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake. When using a display connected to V OUT The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images. WARNING NEVER install the rear display in a location that enables the driver to watch video images while driving. To avoid battery exhaustion Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery. WARNING Do not install this product in a vehicle that does not have an ACC wire or circuitry available. Rear view camera With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. WARNING  SCREEN IMAGE MAY APPEAR REVERSED.  USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes. Handling the USB connector CAUTION  To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred.  Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product. Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact.  USA&CANADA Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404 For warranty information, please see the Limited Warranty sheet included with your product. Visit our website Visit us at the following site: http://www.pioneerelectronics.com http://www.pioneerelectronics.ca 1 Register your product. 2 Receive updates on the latest products and technologies. 3 Download owner’s manuals, order product catalogs, research new products, and much more. 4 Receive notices of software upgrades and software updates. Protecting the LCD panel and screen  Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.  When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.  To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently. < CRD4924-A > 6 A This tion sho M M Notes on internal memory Before removing the vehicle battery  Some of the settings and recorded contents will not be reset. Data subject to erasure The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself).  Some of the settings and recorded contents will not be reset. Resetting the microprocessor CAUTION Pressing the RESET button resets settings and recorded contents to the factory settings.  Do not perform this operation when a device is connected to this product.  Some of the settings and recorded contents will not be reset. The microprocessor must be reset under the following conditions:  Prior to using this product for the first time after installation.  If this product fails to operate properly.  If there appears to be problems with the operation of the system.  If your vehicle position is shown on the map with a significant positioning error. 1 Turn the ignition switch OFF. 2 Press the RESET button with a pen tip or other pointed implement. 6  Set U co In Slid batt  Precaution Basic operation  Refer to Checking part names and functions on page 7 Settings and recorded contents are reset to the factory settings. s nc- on the About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. Meanings of Symbols Used in This Manual X0000BT y set. HOLD m set. ed This indicates model name that are supported the described operations. This indicates to touch an appropriate soft key on the touch screen. This indicates to touch and hold an appropriate soft key on the touch screen. This indicates that there is a reference or supplementary for the key or screen. Use and care of the remote control Installing the battery Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (–) poles aligned properly.  When using for the first time, pull out the film protruding from the tray. WARNING  Do not ingest the battery, Chemical Burn Hazard.  This product, including the supplied remote control, contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.  Keep new or used batteries out of the reach of children. If the battery is swallowed or placed inside any part of the body, consult a doctor immediately.  If the battery compartment does not close securely, stop using the product and keep it away from children.  Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. X5800BHS X4800BS CAUTION  Remove the battery if the remote control is not used for a month or longer.  There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.  Do not handle the battery with metallic tools.  Do not store the battery with metallic objects.  If the battery leaks, wipe the remote control completely clean and install a new battery.  When disposing of used batteries, comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.  “Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)” Using the remote control Point the remote control in the direction of the front panel to operate.  The remote control may not function properly in direct sunlight. Important on. Checking part names and functions  Do not store the remote control in high temperatures or direct sunlight.  Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal. 1 2 3 4 5 6 7 8 9 X3800BHS X2800BS 7 X1800S 9 1 8 2 5 4 3 6 r 7 < CRD4924-A > 7 Basic operation 1 2 3 4 5 6 7 8 9 LCD screen Volume (+/–) button DISP On the AV operation screen, press to turn the button display off. On the Application screen or navigation mode, press to display the side control bar. Press and hold to turn the display off. p When the display is turned off, touch the screen to revert to the original screen. Press to display the top menu screen. button Press and hold to activate the voice recognition function.  Refer to Using the voice recognition function (for iPhone) on page 15 MODE Press to switch between the Application screen button and the AV operation screen. Press and hold to switch to the camera view mode. Press to return to the previous track (chapter) TRK ( or go to the next track (chapter). / ) Press and hold to perform fast reverse or fast button forward. Press to answer or end a call. button RESET button Discloading slot  Refer to Resetting the microprocessor on page 6  Refer to Inserting and ejecting a disc on page 8 Remote control 1 23 8 7 4 5 6 a b 9 c 1 2 Volume (+/–) MODE Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. 3 SRC Press to cycle through all the available sources. Press and hold to turn the source off. 4 TOP Returns to the top menu during DVD playback. MENU 5 MENU Displays the DVD menu during DVD playback. 6 Thumb Selects a menu on the DVD menu. pad 7 MUTE 8 AUDIO Changes the audio language, subtitle language SUBTITLE or viewing angle during DVD playback. ANGLE 9 BAND/ Selects the tuner band when tuner is selected ESC as a source. Cancels the control mode of functions. Switches between media file types when playing the data of Disc, USB. 10 RETURN Returns to the specified point and begins playback from there. Pauses or resumes playback. 11 For audio: Press and hold to perform fast reverse or fast forward. For video: Press to perform fast reverse or fast forward. Press to return to the previous track (chapter) or or go to the next track (chapter). Press to answer or end a call. Stops playback. If you resume playback, playback will start from the point where you stopped. Touch the key again to stop playback completely. 12 FOLDER/P. Selects the next or previous disc or folder. CH Recalls radio station frequencies assigned to preset channel keys. or  Do not open or close the LCD panel by force. It may cause a malfunction.  Do not operate this product until the LCD panel has completely opened or closed. The LCD panel may stop at that angle for safety.  Do not place a glass or can on the open LCD panel. Adjusting the LCD panel angle X5800BHS 1 Press the Notes on using the LCD panel 8 1 Pl ag to adjust the angle of the p p p . Returns to the previous screen. 1 Inserting/ejecting/connecting media 2 CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting and ejecting a disc Inserting a disc X5800BHS 1 Press the 2 Touch X4800BS to open the LCD panel. X5800BHS 1 Press the 2 Touch 1 The p 2 X4800BS 3 button. to open the LCD panel. 3 Remove the disc, and press the 1 2 O button. Ejecting a disc WARNING < CRD4924-A > 1 Eje button. 2 Touch or LCD panel. 3 Touch X4800BS 3 Insert a disc into the disc-loading slot.  Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.  Do not use with the LCD panel left open. It may result in 8 In injury in the event of an accident. CAUTION button. The 4  se t Basic operation Inserting a disc X3800BHS X2800BS X1800S 1 Insert a disc into the disc-loading slot. Ejecting a disc X3800BHS 1 Press X2800BS WARNING X1800S button to eject a disc. Plugging and unplugging a USB storage device p This product may not achieve optimum performance with some USB storage devices. p Connection via a USB hub is not possible. p A USB cable is required for connection. 1 Pull out the plug from the USB port of the USB cable. 2 Plug a USB storage device into the USB cable. 1 ng 4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers.  Network Mode 3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands). Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to this unit. This may cause damage to the speakers. 5 Touch [OK]. The “Smartphone Setup” screen appears. 6 Touch the item.  Refer to Information on the connections and functions for each device on page 18 7 Touch . The top menu screen appears. p Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting.  Refer to Restoring the default settings on page 52 Switching the speaker mode 2 To change the speaker mode, you need to restore this product to the default settings. 1 USB cable 2 USB storage device Check that no data is being accessed before pulling out the USB storage device. 1 Restore the default setting.  Refer to Restoring the default settings on page 52 On first-time startup 1 Start the engine to boot up the system. The “Select Program Language” screen appears. p From the second time on, the screen shown will differ depending on the previous conditions. 2 Touch the language. 3 Touch . The “Speaker Mode Settings” screen appears. 4 Touch the speaker modes.  Standard Mode < CRD4924-A > 9 9 Basic operation How to use the screens Application menu screen *4 Time and date setting screen 10 Abcdefg Abcdefg Abcdefg Abcdefg 6 2016 Month/Date 6/10 48 Setting menu screen Application operation screen Source Select Top menu screen *1 12hour 24hour *2 6/10 *4 System d/m/y m/d/y y/m/d Time Format 21 48 Depending on the connection method, the "smartphone setup" screen is displayed. Abcdefg 21 Abcdefg 21 48 AV operation screen iPod Abcdefg 6/10 21 48 Abcdefghi Abcdefg Abcdefghi Abcdefg ABC 6/10 21 48 Su 99999/99999 You can control the iPhone or smartphone applications directly on this product. Recent application icons Pops iPod 9999’99” -9999’99” You   Phone menu screen Favorite source icons Phone Book *3 abcdefghi 3 abcdefghi... ABC A B abcdefghi AV source selection screen 6/10 Disc HD Radio SiriusXM Spotify Source OFF Power OFF 10 < CRD4924-A > 10 Pandora AV AUX Bluetooth Audio 21 48 *5 abcdefghi abcdefghi abcdefghi C D E F G     The an a     iPod Camera View HD Radio    Basic operation *1 *2 *3 *4 *5 The top menu screen of this manual is the screen when using the AppRadioOne. The items displayed on the screen may vary depending on the connecting device or mode. When you connect an iPhone via Bluetooth wireless technology or a smartphone via USB cable, “Smartphone Setup” screen appears by touching [APPS]. By pressing the button on any screen you can display the Top menu screen. When you connect the external navigation system to this unit, the navigation mode key is displayed at the left bottom of the display. By pressing the MODE button you can switch between the Application screen and the AV operation screen. If you select “Power OFF”, you can turn off almost all functions. The “Power OFF” mode is released in the following cases:  An incoming call is received.  A rear view camera image is input when the vehicle reverses.  A button on this product is pressed.  The ignition switch is turned off (ACC OFF), then turned on (ACC ON). Supported AV source You can play or use the following sources with this product.  Radio (AVH-X4800BS)(AVH-X2800BS)(AVH-X1800S)  HD Radio (HD Radio™ tuner) (AVH-X5800BHS) (AVH-X3800BHS)  CD  ROM (compressed audio files)  DVD-Video  USB The following sources can be played back or used by connecting an auxiliary device.  iPod  Spotify®  Pandora®  Bluetooth audio (AVH-X5800BHS)(AVH-X4800BS)(AVHX3800BHS)(AVH-X2800BS)  SiriusXM® Satellite Radio  AV input (AV)  AUX Displaying the AV operation screen Changing the display order of sources 1 Press Changing the display order of source icons . 2 Touch the AV operation key. The AV operation screen appears. 1 iPod 6/10 21 48 1 Display the “AV source selection” screen. Abcdefghi Abcdefghi ABC Pops 99999/99999 9999’99” -9999’99” 1 Displays the source list. Selecting a source Source on the AV source selection screen 1 Display the “AV source selection” screen. 2 Touch and hold a source icon, and drag the icon to the desired position. Changing the display order of source keys 1 Display the source list.  Refer to Displaying the AV operation screen on page 11 2 Touch . 3 Drag the source key to the desired position. Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers. p To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. 2 Touch the source icon. p When you select “Source OFF”, the AV source is turned off. Source on the source list Common touch panel keys   : Returns to the previous screen. : Closes the screen. 1 Display the source list.  Refer to Displaying the AV operation screen on page 11 2 Touch the source key. p When you select “Source OFF”, the AV source is turned off. 11 < CRD4924-A > 11 Basic operation Operating list screens X5800BHS 2 abcdefghi Artist abcdefghi 3 Alburm abcdefghi Video Songs X4800BS X3800BHS X2800BS Displaying the “Bluetooth” screen Songs Playlist 1 Press 2 Touch abcdefghi . , and then The “Bluetooth” screen appears. Podcast abcdefghi 1 Touching an item on the list allows you to narrow down the options and proceed to the next operation. 2 Appears when all characters are not displayed on the display area. If you touch the key, the rest are scrolled for display. 3 Appears when items cannot be displayed on a single page. Drag the slider bar or the list to view any hidden items. Operating the time bar . Registering your Bluetooth devices p If three devices are already paired, “Memory Full” is displayed. Delete a paired device first.  Refer to Deleting a registered device on page 12 1 Activate the Bluetooth wireless technology on your devices. 2 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 12 1 3 Touch [Connection]. 4 Touch 9999’99” -9999’99” 1 You can change the playback point by dragging the key. p Playback time corresponding to the position of the key is displayed while dragging the key. Switching the operation panel 1 Touch 2  1 Music Registration and connection of Bluetooth® device . The hidden function keys appears. p This key does not appear for some AV sources. 12 < CRD4924-A > 12 . The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found. 5 Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list. p If your device supports SSP (Secure Simple Pairing), a sixdigit number appears on the display of this product. Touch [Yes] to pair the device. p The Bluetooth connection can be also made by detecting this product from the Bluetooth device. Before registration, make sure that “Visibility” in the “Bluetooth” menu is set to “On”. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.  Refer to Switching visibility on page 13 p Two cellular phones can be connected to this product at the same time.  Refer to Switching the connected Bluetooth device on page 13 p If you try to connect an unconnected cellular phone while two cellular phones are already connected, the first one of the two connected cellular phones will be disconnected and the unconnected cellular phone will be connected instead. Setting Bluetooth device auto connection This function connects the last connected Bluetooth device to this product automatically as soon as the two devices are less than a few meters apart. The default setting is “On”. p If two Bluetooth devices were connected the last time, the two devices are connected to this product automatically in the order that they are registered in the device list. 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 12 2 Touch [Auto Connect] to switch “On” or “Off”. Deleting a registered device CAUTION 3 4 p Sw This the The 1  2 En Bl To c ente You p 1 Never turn this product off while the paired Bluetooth device is being deleted.  1 Display the “Bluetooth” screen. 3  Refer to Displaying the “Bluetooth” screen on page 12 2 Touch [Connection]. 3 Touch . Connecting a registered Bluetooth device manually Connect the Bluetooth device manually in the following cases:  Two or more Bluetooth devices are registered, and you want to manually select the device to be used.  You want to reconnect a disconnected Bluetooth device.  Connection cannot be established automatically for some reason. 1 Activate the Bluetooth wireless technology on your devices. 2 4 D in 1  2 The pro f nd d. o e n ”. e : nt e Registration and connection of Bluetooth® device 2 Display the “Bluetooth” screen. Clearing the Bluetooth memory In such cases, perform the following procedure to check the software version on this unit. 3 Touch [Connection]. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake.  Refer to Displaying the “Bluetooth” screen on page 12  Refer to Displaying the “Bluetooth” screen on page 12 4 Touch the name of the device. p To disconnect the device, touch the name of the connected device in the list. Switching visibility This function sets whether or not to make this product visible to the other device. The default setting is “On”. CAUTION Never turn this product off while the Bluetooth memory is being cleared. 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 12 2 Touch [Bluetooth Memory Clear]. 3 Touch [Clear]. 1 Display the “Bluetooth” screen. The confirmation screen appears. 2 Touch [Visibility] to switch “On” or “Off”. Updating Bluetooth software  Refer to Displaying the “Bluetooth” screen on page 12 Entering the PIN code for Bluetooth wireless connection To connect your Bluetooth device to this product, you need to enter a PIN code. You can change the PIN code with this function. p The default PIN code is “0000”. 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 12 This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website. p The source is turned off and the Bluetooth connection is disconnected before the process starts. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p You need to store the version update file to the USB storage device in advance. CAUTION 2 Touch [PIN Code Input]. Never turn this product off and never disconnect the phone while the software is being updated. 3 Touch [0] to [9] to input the pin code (up to 8 -digits). 1 Connect the USB storage device stored the version update file to this unit. 4 Touch  Refer to Plugging and unplugging a USB storage device on page 9 . Displaying the device information 1 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 12 2 Touch [Device Information]. The device name and address of the Bluetooth device on this product are displayed. n 1 Display the “Bluetooth” screen. 2 Touch [Bluetooth Version Information]. The version of this product’s Bluetooth module appears. Switching the connected Bluetooth device After registering and connecting the Bluetooth devices to this product, you can switch among the devices using the switch devices key in the phone function and some audio sources. p You can register up to three Bluetooth devices on this product.  Refer to Registering your Bluetooth devices on page 12 p You can connect one of the registered devices to this product. In cases where the registered device is equipped with a phone function, a total of two devices can be connected at the same time when using the phone function. If two of the three registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. p The icon for the cellular phone currently being used is displayed on the “Phone menu” screen. If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. The contents of the phone menu are memorized for each connected cellular phone.  Refer to Hands-free phoning on page 14 p The switch devices key will appear for some audio sources. The audio source may automatically switch to another source depending on the selected device. 2 Display the “Bluetooth” screen.  Refer to Displaying the “Bluetooth” screen on page 12 3 Touch [BT Software Update]. 4 Touch [Start]. Follow the on-screen instructions to finish updating the Bluetooth software. Displaying the Bluetooth software version If this product fails to operate properly, you may need to consult your dealer for repair. 13 < CRD4924-A > 13 Hands-free phoning X5800BHS X4800BS X3800BHS *5 X2800BS Synchronizes the contacts on this product's phone book with the contacts on your phone manually. Phone Book *1 *2 *3 *4 *5 3 abcdefghi... *6 ABC A abcdefghi B abcdefghi C D abcdefghi F G abcdefghi Switches the search language to English or system language. *2 *3 *4 Switches to the preset dial screen.  Refer to Using the preset dial lists on page 14 Switches to the phone book list.  Refer to Calling a number in the phone book on page 14 Switches to the missed, received and dialed call lists.  Refer to Dialing from the history on page 14 Switches the mode to enter the phone number directly.  Refer to Direct dialing on page 14 CAUTION For your safety, avoid talking on the phone as much as possible while driving. To use this function you need to connect your cellular phone to this product via Bluetooth in advance.  Refer to Registration and connection of Bluetooth® device on page 12 Displaying the Phone menu screen 1 Press 2 Touch . Making a phone call You can make a phone call in many different ways. Direct dialing 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 14 . 3 Touch the number keys to enter the phone number. 14 < CRD4924-A > 14 Calling a number in the phone book p The contacts on your phone will be automatically transferred to this product. p “Visibility” of the “Bluetooth” screen should be on.  Refer to Switching visibility on page 13 p If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the phone book of the second phone is displayed. 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 14 4 Touch to make a call. 5 Touch to end the call. . 3 Touch the desired name on the list. 4 Touch the phone number. 2 On the 3 Di 1  2 3 The Re p The dial screen appears and dialing starts. 5 Touch to end the call. Dialing from the history 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 14 2 Touch . The Phone menu screen appears. 2 Touch p You may hear a noise when you hang up the phone. 2 Touch E abcdefghi *6 *1 Switches to the voice recognition function (for iPhone).  Refer to Using the voice recognition function (for iPhone) on page 15 If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. The following items are displayed on the key.  Name of the current cellular phone  List number of the current cellular phone  Battery status of the current cellular phone  Reception status of the current cellular phone  Refer to Switching the connected Bluetooth device on page 13 . 3 Touch the item to switch the history list. The following items are available: : Received call list   : Dialed call list  : Missed call list 1   2 M ti p 4 Touch the desired entry on the list to make a call. p 5 Touch 1 The dial screen appears and dialing starts. to end the call. Using the preset dial lists  Registering a phone number Ch You can easily store up to six phone numbers per device as presets. Se 1 Display the “Phone menu” screen.  Refer to Displaying the Phone menu screen on page 14 You red the Hands-free phoning 2 Touch or 3 Touch . . On the “Phone Book” screen, touch the desired name to display the contact’s phone number. Dialing from the preset dial list 1 Display the “Phone menu” screen. 