Chevrolet - Sonic - Wiring Diagram - 2012 - 2012

2012 Chevrolet Sonic ABOUT THE VEHICLE Make: Chevrolet Model: Sonic Year: 2012 Scosche Pro App STANDARD/ OPTIONAL - AM/FM/CD/MP3/SAT Radio - 3.5mm Aux/USB ipod input - Steering Wheel Controls - Bluetooth - OnStar SPEAKER NOTES Front Speakers A-Pillar Speaker: Upper Door: Lower Door: Speaker Adapter: Speaker Harness: Speaker Assembly: Dimensions: A-Pillar L: 1.56” W: 1.56” D: 0.56” Rear Speakers Lower Door: Subwoofer: Speaker Adapter: Speaker Harness: Speaker Assembly: Dimensions: 1” N/A 6 1/2” SAGMHR634 N/A (1) 7mm Screw Securing Speaker Dash Type: Aftermarket Type: Aftermarket Kit: Harness: Antenna Adapter: Auxiliary Input: USB Input: New Custom Dash Double Din GM5204B GM27SR VWA3B TBA Glove Box Glove Box Speaker L: 6.37” W: 6.37” D: 2.75” 6 1/2” TBA SAGMHR634 N/A (1) 7mm Screw Securing Speaker Speaker L: 6.37” W: 6.37” D: 2.75” APPLICATIONS Subwoofer: L: TBA W: TBA D: TBA FACTORY COLOR CODES (+)12v Battery: (+)12v Accessory: (-) 12v Ground: (+)12v Amp Turn On: Left Front Speaker (+): Left Front Speaker (-): Right Front Speaker (+): Right Front Speaker (-): Left Rear Speaker (+): Left Rear Speaker (-): Right Rear Speaker (+): Right Rear Speaker (-): Red/Blue Data Black N/A Yellow Yellow/Black Blue Purple/Black Green Green/Black White Blue/Black 2012 Chevrolet Sonic PRELIMINARY: Disconnect the negative battery cable. RADIO REMOVAL VEHICLE DISASSEMBLY Make: Chevrolet Model: Sonic 2012 Year: Scosche Pro App A-PILLAR TWEETER 1. With PRT unclip radio bezel and remove. 2. Extract (4) 7mm. Screws from radio. 3. Unplug and remove radio. 1. Use PRT to unclip the a-pillar, unplug and remove. 2. Use PRT to remove the tweeter from the a-pillar. FRONT DOOR SPEAKERS 1. Use PRT to unclip plastic cover and remove. 2. Use PRT to remove plastic cover behind door handle. 3. Unscrew (1) T-20 torx behind the panel just removed. 4. Use PRT to remove rubber cover located in the door grab. 5. Unscrew (1) T-20 torx behind the rubber cover just removed. 6. Use PRT to unclip the door panel, unplug and remove. 7. Unscrew (1) 7mm bolt securing the speaker, unplug and remove. REAR DOOR SPEAKERS 1. Use PRT to remove plastic cover behind door handle. 2. Uscrew (1) T-20 torx behind the panel just removed. 3. Use PRT to remove rubber cover located in the door grab. 4. Unscrew (1) T-20 torx behind the rubber cover just removed. 5. Use PRT to unclip the door panel, unplug and remove. 6. Unscrew (1) 7mm screw securing the speaker, unplug and remove.