Chevrolet - Blazer - Wiring Diagram - 1969 - 1972

Visitez Traxxas.com/manuals pour télécharger les instructions dans votre langue. Visite la página Traxxas.com/manuals para descargar el instrucciones en su idioma. Auf Traxxas.com/manuals, können Sie anleitung in Ihrer Sprache downloaden. Pro Scale® Lighting Installation Kit - 1969 - 1972 Chevrolet® Blazer® Kit contents: • Distribution block mount (1) • Reverse lights harness (1) • Turn signal harness (1) • Double jumper (1) • 2.6x8mm button-head cap screws (2) • Double-sided adhesive foam tape • Zip ties (5) Covers Part #8091 Fig. A1 Tools required: • 1.5mm hex wrench • 2.0mm hex wrench Fig. A2 2.6x8mm BCS Installation This kit contains the installation components necessary to adapt the part #8090 Blazer LED Light Kit for full compatibility with the Pro Scale Advanced Lighting Control system, part #6591 (part #8090 and 6591 sold separately). If the 8090 LED light kit has already been installed, it will be necessary to remove the existing distribution block and mount in the 1.6x8mm BCS body and install the new Pro Scale Lighting Distribution Block (part #6593, included with part #6591) using the new distribution block mount supplied with this kit. These instructions assume the 8090 LED Light Kit has already been installed. If you are installing the 8090 LED light kit for the first time, then follow the instructions included with the LED light kit except use the Pro Scale Lighting Distribution Block along with the mounting bracket supplied with this kit. In either case above, you will also install the reverse lights harness supplied with this kit alongside the tail light harness in the body. For the 1972 Blazer, you will also install the supplied turn signal Distribution Block harness on the chassis. See the wiring diagram on the reverse side for supplemental information. LED Light Harness Ports 1. Remove the 1.6x8mm button-head screws (2) to remove the installed distribution block and mount from the vehicle body (Fig. A1). Accessory Connectors (not used with this kit) 2. Unplug the installed LED light wire harness connectors from the existing distribution block. Wiring connectors for the 3. Peel the backing from one side of the included adhesive foam tape and attach it to the flat surface lights are labeled with on the back of the new distribution block mount. Do not remove the backing from the other side of the letters and/or colors. tape yet (Fig. A2). 4. Install the new distribution block mount and secure with the 1.6x5mm button-head screws (2) from step 1 (Fig. A2). 5. Gently flex the body away from the distribution block mount and remove the backing from the other E A side of the foam tape. Press the body against the mount to adhere it to the mount. F 6. Insert the LEDs on the included rear turn signal and reverse lights harnesses into the tail light ™ B PRO-SCALE G PRO SCALE ® LIGHTING assemblies. The LEDs should snap into place. Route the wiring harness alongside the brake lights DISTRIBUTION H DISTRIBUTION BLOCK C and rear side marker lights harnesses in the body (see Body Wiring Diagram on page 3). New zip ties BLOCK K are provided to secure the wires after the new harness is added. Secure the wiring to the body in the Part 6593 M D #XXXX locations provided. The zip ties do not need to be tight; allow some extra length for wire movement. N 7. Plug all LED light wire harness connectors into the ports on the Pro Scale Distribution Block. Match the color band and/or letter indicator on the wire harnesses with the corresponding color/letter of each port on the distribution block (see chart below). Install the included double jumper into port F. 8. Use the included 2.6x8mm button-head screws (2) to secure the distribution block Letter Color Description Function to the mount Fig. A2). A N/A Reverse light harness Back up light LEDs when vehicle is put in reverse 9. 1972 Blazer Front Bumper-Mounted Turn Tail lights, brake lights, and rear integrated turn signal Signals: Plug the black connector (blue and C Red Tail light harness LEDs black wires) from the turn signal harness into the channel 5 port on the Pro Scale Lighting D Blue Rear side marker harness Rear side marker LEDs Power Module; plug the other black connectors Install jumper when using rear integrated turn signals (single black wires) into the channel 10 and 12 F N/A Rear integrated turn signal jumper (single red LED for tail, stop, and turn) ports (see Chassis Wiring Diagram on reverse Headlights, front marker light LEDs, and side marker side). Use zip ties and G White Headlight assembly harness light LEDs the existing wire clips to secure the wiring to the chassis. H White Front turn signal harness Front turn signal light LEDs T RAXXAS. com Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: [email protected] HKC20069-R02 Rev 210625 Chassis Wiring Diagram Front Bumper Turn Signal 1972 BLAZER ONLY Front Bumper Turn Signal 1972 BLAZER ONLY Rock Light Chassis Wiring (Top Down View) Rock Light FRONT Rock Light Rock Light Optional MAXX Link Cable Wiring (TQi Receiver Only) Motor Motor Sense Connectors Receiver XL-5 HV ESC From ESC To Receiver To Motor Connector Route wires under battery tray Lighting Power Module From CH2 Receiver Communication Cable Black Wires to CH2 To ESC From ESC Blue Wire to CH1 From ESC Route wires under battery tray To MAXX Link IN port on Lighting Power Module PRO SCALE ® LIGHTING DISTRIBUTION BLOCK F E G Rock Light H K M N Rock Light A C Part 6593 Front Bumper Turn Signal 1972 BLAZER ONLY B D Breakaway Cable from Distribution Block mounted on body Rock Light Rock Light Visit Traxxas.com/ProScaleLighting for additional information about installing and connecting accessories such as auxiliary lighting (rock lights shown, part #8026X, sold separately) to the Pro Scale Lighting Module. Body Wiring Diagram Body Wiring (viewed from the underside of the body) Headlight Side Marker Headlight Grille Turn Signal 1969 BLAZER ONLY Grille Turn Signal 1969 BLAZER ONLY Side Marker FRONT Actual mounting view. Distribution Block face shown in the diagram for clarity. B Part 6593 H K M N C A A Red Breakaway Cable to Lighting Power Module on chassis D F G White PRO SCALE ® LIGHTING DISTRIBUTION BLOCK E Double Jumper Blue Visit Traxxas.com/ProScaleLighting for additional information about installing and connecting accessories such as auxiliary lighting to the Pro Scale Lighting Module. Side Marker Side Marker Reverse Light Tail Light / Turn Signal / Brake Light Reverse Light Tail Light / Turn Signal / Brake Light Chevrolet® and Blazer® are trademarks of General Motors. All copyrights and trademarks are used by Traxxas under license.